2010-Oct-09 01:01:03 BEGIN executive: CIMA executive starting ... 2010-Oct-09 01:01:03 NOTE executive: STARTING NEW CIMA SESSION 2010-Oct-09 01:01:03 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2010-Oct-09 01:01:03 INFO4 executive: This is an ON-LINE session 2010-Oct-09 01:01:03 INFO4 executive: This is a LOCAL session 2010-Oct-09 01:01:03 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2010-Oct-09 01:01:03 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'R Minchin' 2010-Oct-09 01:01:03 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20101009' 2010-Oct-09 01:01:04 LOG2 log_preferences: Currently applied preferences: 2010-Oct-09 01:01:04 LOG2 log_preferences: prefs(dailylog) = daily 2010-Oct-09 01:01:04 LOG2 log_preferences: prefs(offlinelog) = skip 2010-Oct-09 01:01:04 LOG2 log_preferences: prefs(datawindow) = ignore 2010-Oct-09 01:01:04 LOG2 log_preferences: prefs(limitwarning) = enabled 2010-Oct-09 01:01:04 LOG2 log_preferences: prefs(wappfailure) = abort 2010-Oct-09 01:01:04 LOG2 log_preferences: prefs(helpstyle) = stay-open 2010-Oct-09 01:01:04 LOG2 log_preferences: prefs(logcolours) = full 2010-Oct-09 01:01:04 LOG2 log_preferences: prefs(displaylevel) = INFO3 2010-Oct-09 01:01:04 LOG2 log_preferences: prefs(loglevel) = LOG5 2010-Oct-09 01:01:04 LOG2 log_preferences: prefs(displayformat) = short 2010-Oct-09 01:01:04 LOG2 log_preferences: prefs(logformat) = new 2010-Oct-09 01:01:04 LOG2 log_preferences: prefs(fontsize) = 4 2010-Oct-09 01:01:04 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2010-Oct-09 01:01:04 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2010-Oct-09 01:01:04 ALERT executive: CIMA executive ready 2010-Oct-09 01:01:05 NOTE frontend: CIMA frontend ready 2010-Oct-09 01:01:05 LOG4 got_cormsg: From DATATAKING: vw% setup 2010-Oct-09 01:01:10 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2010-Oct-09 01:01:10 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2010-Oct-09 01:01:10 LOG4 got_cormsg: From DATATAKING: vw% io 2010-Oct-09 01:01:10 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2010-Oct-09 01:01:10 LOG4 got_cormsg: From DATATAKING: 2010-Oct-09 01:01:10 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2010-Oct-09 01:01:10 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2010-Oct-09 01:01:10 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2010-Oct-09 01:01:10 LOG4 got_cormsg: From DATATAKING: vw% connectall 2010-Oct-09 01:01:10 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2010-Oct-09 01:01:10 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2010-Oct-09 01:01:10 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2010-Oct-09 01:01:10 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2010-Oct-09 01:01:10 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2010-Oct-09 01:01:10 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2010-Oct-09 01:01:10 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2010-Oct-09 01:01:10 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2010-Oct-09 01:01:10 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2010-Oct-09 01:01:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:01:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:01:36 NOTE CIMA-load_config_file: Loading and applying configuration file 'ages_lbw_smart.conf' 2010-Oct-09 01:01:36 INFO1 CIMA-find_last_tsys: Last Tsys-values for 'L-Band Wide' is from 2010-Oct-08 15:37:51 for 'hcorcal': 33.6 K & 32.0 K 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "lbw" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "10GHz to 1500" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "275" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "275" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "275" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "275" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "1775.000000" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "1775.000000" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "1775.000000" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "1775.000000" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "1775.000000" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "1775.000000" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "1775.000000" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "1775.000000" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "on" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "lbwpol lin" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "lbfb 7" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "F" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "5" 2010-Oct-09 01:01:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "7 5" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "4" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "11420.405752" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "0" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "0" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "F" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "0" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "1500" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "1500 1500 1500 1500 1500 1500 1500 1500" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "750" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "F" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "5" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "50" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "50" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "25" 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "25" 2010-Oct-09 01:01:38 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2010-Oct-09 01:01:38 LOG4 exec_msg: From OBSERVER: config_iflo 2010-Oct-09 01:01:38 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Oct-09 01:01:38 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Oct-09 01:01:38 INFO1 config_iflo: Starting to configure IF/LO path for L-Band Wide 2010-Oct-09 01:01:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Oct-09 01:01:38 INFO1 config_iflo: Selecting receiver L-Band Wide 2010-Oct-09 01:01:38 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver L-Band Wide} 2010-Oct-09 01:01:38 LOG1 select_receiver: Calling 'select_receiver lbw no no yes' 2010-Oct-09 01:01:38 START begin_task: Starting task 'selecting receiver L-Band Wide' 2010-Oct-09 01:01:38 LOG5 begin_task: Level: (2) ID = <10002> Status = 0 0 0 0 ok 2010-Oct-09 01:01:38 NOTE select_receiver: Starting to select receiver L-Band Wide 2010-Oct-09 01:01:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver L-Band Wide ...} 2010-Oct-09 01:01:38 LOG3 vw_send: To DATATAKING: setupall 5 1400.0 2010-Oct-09 01:01:38 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Oct-09 01:01:38 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Oct-09 01:01:38 STOP finish_task: Finishing task 'selecting receiver L-Band Wide' 2010-Oct-09 01:01:38 LOG5 finish_task: Level: (2) ID = <10002> Status = 0 0 0 0 ok 2010-Oct-09 01:01:38 INFO2 finish_task: DONE finished selecting: receiver L-Band Wide 2010-Oct-09 01:01:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:01:38 STOP end_task: Finishing task 'selecting receiver L-Band Wide' with status 'OK' 2010-Oct-09 01:01:38 LOG5 end_task: Level: (2) ID = <10002> Status = 0 0 0 0 ok 2010-Oct-09 01:01:38 START begin_task: Starting task 'waiting for receiver L-Band Wide' 2010-Oct-09 01:01:38 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2010-Oct-09 01:01:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 30.4 BITMAP stat_alfa_rot INFO {Waiting on rotating floor} 2010-Oct-09 01:01:38 START begin_task: Starting task 'waiting on waiting for receiver rotation' 2010-Oct-09 01:01:38 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2010-Oct-09 01:01:38 LOG4 got_cormsg: From DATATAKING: setupall 5 1400.0 2010-Oct-09 01:01:38 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Oct-09 01:01:52 LOG4 got_cormsg: From DATATAKING: waiting for turret position:285.79 2010-Oct-09 01:02:05 LOG4 got_cormsg: From DATATAKING: settinng up if2 2010-Oct-09 01:02:05 LOG4 got_cormsg: From DATATAKING: setting up if1lo 2010-Oct-09 01:02:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:07 STOP end_task: Finishing task 'waiting on waiting for receiver rotation' with status 'OK' 2010-Oct-09 01:02:07 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2010-Oct-09 01:02:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT 2010-Oct-09 01:02:07 STOP end_task: Finishing task 'waiting for receiver L-Band Wide' with status 'OK' 2010-Oct-09 01:02:07 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2010-Oct-09 01:02:07 INFO1 config_iflo: Configuring rest of the IF/LO path 2010-Oct-09 01:02:07 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2010-Oct-09 01:02:07 LOG3 vw_send: To DATATAKING: lbwpol lin 2010-Oct-09 01:02:07 LOG3 vw_send: To DATATAKING: lbfb 7 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if1 {if1_shcl F} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if1 {if1_rfnum 5} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 7 5} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 4} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11420405752.0} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if1 {if1_ac2sw 0} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if1 {if1_phbsig 0} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if1 {if1_hybrid F} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if1 {if1_phblo 0} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if1 {if1_750nb F} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 5} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq 1500} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 1500 1500 1500 1500 1500 1500 1500 1500} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if2 {if2_vlbainp 750} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2010-Oct-09 01:02:08 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2010-Oct-09 01:02:08 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2010-Oct-09 01:02:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Oct-09 01:02:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:02:08 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Oct-09 01:02:08 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: lbwpol lin 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: lbfb 7 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_shcl F} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfnum 5} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 7 5} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 4} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11420405752.0} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_ac2sw 0} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_phbsig 0} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_hybrid F} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_phblo 0} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_750nb F} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 5} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq 1500} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 1500 1500 1500 1500 1500 1500 1500 1500} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_vlbainp 750} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2010-Oct-09 01:02:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:02:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:22 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 01:02:22 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Oct-09 01:02:22 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2010-Oct-09 01:02:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Oct-09 01:02:22 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Oct-09 01:02:22 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Oct-09 01:02:22 DONE finish_task: DONE finished configuration: IF/LO path 2010-Oct-09 01:02:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-09 01:02:22 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Oct-09 01:02:22 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Oct-09 01:02:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Oct-09 01:02:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Oct-09 01:02:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Oct-09 01:02:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Oct-09 01:02:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "1 chan, 9-level, pol a" 2010-Oct-09 01:02:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "1 chan, 9-level, pol b" 2010-Oct-09 01:02:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "1 chan, 9-level, pol a" 2010-Oct-09 01:02:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "1 chan, 9-level, pol b" 2010-Oct-09 01:02:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "50" 2010-Oct-09 01:02:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "50" 2010-Oct-09 01:02:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "25" 2010-Oct-09 01:02:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "25" 2010-Oct-09 01:02:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Oct-09 01:02:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "0" 2010-Oct-09 01:02:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "0" 2010-Oct-09 01:02:23 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2010-Oct-09 01:02:23 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2010-Oct-09 01:02:23 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Oct-09 01:02:23 LOG5 begin_task: Level: (1) ID = <10006> Status = 0 0 0 0 ok 2010-Oct-09 01:02:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Oct-09 01:02:23 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Oct-09 01:02:23 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Oct-09 01:02:23 START begin_task: Starting task 'selecting calibration port' 2010-Oct-09 01:02:23 LOG5 begin_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2010-Oct-09 01:02:23 LOG3 vw_send: To DATATAKING: calport 3 2010-Oct-09 01:02:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Oct-09 01:02:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:02:23 START begin_task: Starting task 'waiting on calport' 2010-Oct-09 01:02:23 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-Oct-09 01:02:23 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Oct-09 01:02:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:02:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:23 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 01:02:23 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Oct-09 01:02:23 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-Oct-09 01:02:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Oct-09 01:02:23 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Oct-09 01:02:23 LOG5 end_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2010-Oct-09 01:02:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Oct-09 01:02:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Oct-09 01:02:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-09 01:02:23 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Oct-09 01:02:23 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-09 01:02:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Oct-09 01:02:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-09 01:02:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-09 01:02:23 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Oct-09 01:02:23 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Oct-09 01:02:23 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Oct-09 01:02:23 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Oct-09 01:02:23 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Oct-09 01:02:23 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Oct-09 01:02:23 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Oct-09 01:02:23 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Oct-09 01:02:24 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Oct-09 01:02:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2010-Oct-09 01:02:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2010-Oct-09 01:02:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2010-Oct-09 01:02:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2010-Oct-09 01:02:24 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Oct-09 01:02:24 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Oct-09 01:02:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-09 01:02:24 LOG5 begin_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2010-Oct-09 01:02:24 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-09 01:02:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Oct-09 01:02:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-09 01:02:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-09 01:02:24 LOG5 end_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2010-Oct-09 01:02:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2010-Oct-09 01:02:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2010-Oct-09 01:02:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2010-Oct-09 01:02:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2010-Oct-09 01:02:24 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Oct-09 01:02:24 LOG5 finish_task: Level: (1) ID = <10006> Status = 0 0 0 0 ok 2010-Oct-09 01:02:24 DONE finish_task: DONE finished configuring: the WAPPs in single board mode 2010-Oct-09 01:02:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-09 01:02:24 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Oct-09 01:02:24 LOG5 end_task: Level: (1) ID = <10006> Status = 0 0 0 0 ok 2010-Oct-09 01:02:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2010-Oct-09 01:02:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Oct-09 01:02:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Oct-09 01:02:24 NOTE CIMA-load_config_file: Configuration file 'ages_lbw_smart.conf' applied. 2010-Oct-09 01:02:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2010-Oct-09 01:02:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20101009.a2048.0000.fits 2010-Oct-09 01:02:25 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20101009.a2048.0000.fits} 2010-Oct-09 01:02:56 COMMAND CIMA-send_to_exec: Sending command to point to a source 2010-Oct-09 01:02:56 LOG4 exec_msg: From OBSERVER: track_new_source j023026+254503 023025.80 254503.39 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 5818 Topocentric velocity(optical) 0 0 0.0 0.0 0 2010-Oct-09 01:02:56 LOG1 track_new_source: Calling 'track_new_source j023026+254503 023025.80 254503.39 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 5818 Topocentric velocity(optical) 0 0 0.0 0.0 0' 2010-Oct-09 01:02:56 BEGIN begin_task: Starting task 'selecting new source' 2010-Oct-09 01:02:56 LOG5 begin_task: Level: (1) ID = <10011> Status = 0 0 0 0 ok 2010-Oct-09 01:02:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {j023026+254503} INFO {Selecting source 'j023026+254503' ...} 2010-Oct-09 01:02:56 LOG3 track_source: Calling 'track_source j023026+254503 023025.80 254503.39 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 5818 Topocentric velocity(optical)' 2010-Oct-09 01:02:56 START begin_task: Starting task 'sending tracking commands' 2010-Oct-09 01:02:56 LOG5 begin_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2010-Oct-09 01:02:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {j023026+254503} INFO {Slewing to source 'j023026+254503' ...} 2010-Oct-09 01:02:56 INFO1 track_source: Starting to track j023026+254503 2010-Oct-09 01:02:57 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023026+254503" 2010-Oct-09 01:02:57 LOG3 vw_send: To DATATAKING: set ra 023025.80 2010-Oct-09 01:02:57 LOG3 vw_send: To DATATAKING: set dec 254503.39 2010-Oct-09 01:02:57 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Oct-09 01:02:57 LOG3 vw_send: To DATATAKING: pnt tr 023025.80 254503.39 -CJ 2010-Oct-09 01:02:57 LOG3 vw_send: To DATATAKING: dopsetvel 5818 topo 2010-Oct-09 01:02:57 STOP finish_task: Finishing task 'sending tracking commands' 2010-Oct-09 01:02:57 LOG5 finish_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2010-Oct-09 01:02:57 INFO2 finish_task: DONE finished sending: tracking commands 2010-Oct-09 01:02:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:02:57 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Oct-09 01:02:57 LOG5 end_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2010-Oct-09 01:02:57 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2010-Oct-09 01:02:57 START begin_task: Starting task 'applying pointing corrections' 2010-Oct-09 01:02:57 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2010-Oct-09 01:02:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2010-Oct-09 01:02:57 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-09 01:02:57 STOP finish_task: Finishing task 'applying pointing corrections' 2010-Oct-09 01:02:57 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2010-Oct-09 01:02:57 INFO2 finish_task: DONE finished applying: pointing corrections 2010-Oct-09 01:02:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:02:57 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2010-Oct-09 01:02:57 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2010-Oct-09 01:02:57 STOP finish_task: Finishing task 'selecting new source' 2010-Oct-09 01:02:57 LOG5 finish_task: Level: (1) ID = <10011> Status = 0 0 0 0 ok 2010-Oct-09 01:02:57 DONE finish_task: DONE finished selecting: new source 2010-Oct-09 01:02:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-09 01:02:57 END end_task: Finishing task 'selecting new source' with status 'OK' 2010-Oct-09 01:02:57 LOG5 end_task: Level: (1) ID = <10011> Status = 0 0 0 0 ok 2010-Oct-09 01:02:57 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023026+254503" 2010-Oct-09 01:02:57 LOG4 got_cormsg: From DATATAKING: set ra 023025.80 2010-Oct-09 01:02:57 LOG4 got_cormsg: From DATATAKING: vw% 023025.80 2010-Oct-09 01:02:57 LOG4 got_cormsg: From DATATAKING: 2010-Oct-09 01:02:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:02:57 LOG4 got_cormsg: From DATATAKING: set dec 254503.39 2010-Oct-09 01:02:57 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Oct-09 01:02:57 LOG4 got_cormsg: From DATATAKING: pnt tr 023025.80 254503.39 -CJ 2010-Oct-09 01:02:57 LOG4 got_cormsg: From DATATAKING: dopsetvel 5818 topo 2010-Oct-09 01:02:57 LOG4 got_cormsg: From DATATAKING: 254503.39 2010-Oct-09 01:02:57 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2010-Oct-09 01:02:57 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-09 01:02:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:10:08 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 01:10:08.297 (seconds: 4208.297)!} 2010-Oct-09 01:10:08 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 01:10:08.297 (seconds: 4208.297)! 2010-Oct-09 01:10:52 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2010-Oct-09 01:10:52 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 off lcorcal each first one 2010-Oct-09 01:10:52 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 off lcorcal each first one' 2010-Oct-09 01:10:52 BEGIN begin_task: Starting task 'standard on/off' 2010-Oct-09 01:10:52 LOG5 begin_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2010-Oct-09 01:10:52 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'j023026+254503' 2010-Oct-09 01:10:52 INFO1 onoff_wapp: Starting pattern: Standard on/off 2010-Oct-09 01:10:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2010-Oct-09 01:10:52 START begin_task: Starting task 'waiting on telescope' 2010-Oct-09 01:10:52 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2010-Oct-09 01:10:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-09 01:10:52 LOG3 waittrk: Start waittrk 5 2010-Oct-09 01:10:52 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-09 01:10:52 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Oct-09 01:10:57 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-09 01:10:57 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Oct-09 01:10:57 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-09 01:10:57 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2010-Oct-09 01:10:57 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-09 01:10:57 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2010-Oct-09 01:10:57 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-09 01:10:57 INFO2 waittrk: Now tracking j023026+254503 2010-Oct-09 01:10:57 LOG4 waittrk: Current telescope position: Az = 226.40 ZA = 11.22 2010-Oct-09 01:10:57 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-09 01:10:57 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2010-Oct-09 01:10:57 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-09 01:10:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:10:57 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-09 01:10:57 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2010-Oct-09 01:10:57 START begin_task: Starting task 'selecting calibration type' 2010-Oct-09 01:10:57 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2010-Oct-09 01:10:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-09 01:10:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-09 01:10:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:10:57 START begin_task: Starting task 'waiting on setcal' 2010-Oct-09 01:10:57 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2010-Oct-09 01:10:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-09 01:10:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:10:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:10:57 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 01:10:57 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-09 01:10:57 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2010-Oct-09 01:10:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-09 01:10:57 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-09 01:10:57 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2010-Oct-09 01:10:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2010-Oct-09 01:10:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2010-Oct-09 01:10:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2010-Oct-09 01:10:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2010-Oct-09 01:10:57 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20101009.a2048.0000.fits' is empty! 2010-Oct-09 01:10:57 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2010-Oct-09 01:10:57 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2010-Oct-09 01:10:57 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-09 01:10:57 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2010-Oct-09 01:10:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-09 01:10:57 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-09 01:10:57 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023026+254503" 2010-Oct-09 01:10:57 LOG3 vw_send: To DATATAKING: pnt tr 23025.800000 254503.390000 -CJ 2010-Oct-09 01:10:58 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-09 01:10:58 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2010-Oct-09 01:10:58 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-09 01:10:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:10:58 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-09 01:10:58 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2010-Oct-09 01:10:58 START begin_task: Starting task 'waiting on telescope' 2010-Oct-09 01:10:58 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-Oct-09 01:10:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-09 01:10:58 LOG3 waittrk: Start waittrk 5 2010-Oct-09 01:10:58 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-09 01:10:58 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2010-Oct-09 01:10:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:10:58 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023026+254503" 2010-Oct-09 01:10:58 LOG4 got_cormsg: From DATATAKING: pnt tr 23025.800000 254503.390000 -CJ 2010-Oct-09 01:10:58 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-09 01:10:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2010-Oct-09 01:11:03 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-09 01:11:03 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2010-Oct-09 01:11:03 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-09 01:11:03 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2010-Oct-09 01:11:06 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-09 01:11:06 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2010-Oct-09 01:11:06 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-09 01:11:06 INFO2 waittrk: Now tracking j023026+254503 2010-Oct-09 01:11:06 LOG4 waittrk: Current telescope position: Az = 226.29 ZA = 11.19 2010-Oct-09 01:11:06 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-09 01:11:06 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-Oct-09 01:11:06 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-09 01:11:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:11:06 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-09 01:11:06 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-Oct-09 01:11:06 LOG5 antvel: Calling 'antvel 23025.800000 254503.390000 J Topocentric 0' 2010-Oct-09 01:11:06 LOG2 antvel: Precessing RA = 02:30:25.8 Dec = +25:45:03.4 Epoch = 2010.77221 J 2010-Oct-09 01:11:06 LOG2 antvel: Computed apparent RA = 02:31:05.6 Dec = +25:48:04.6 2010-Oct-09 01:11:06 LOG2 antvel: Parameters to Doppler: Topocentric 18666 2010 282 0.0 2010-Oct-09 01:11:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Oct-09 01:11:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=5818.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-Oct-09 01:11:06 INFO4 dopset_gen: New sky frequencies: 1393.365052 1393.365052 1393.365052 1393.365052 1393.365052 1393.365052 1393.365052 1393.365052 1393.365052 2010-Oct-09 01:11:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1393.365052 sky0=1393.365052 sky1=1393.365052 sky2=1393.365052 sky3=1393.365052 sky4=1393.365052 sky5=1393.365052 sky6=1393.365052 sky7=1393.365052 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2010-Oct-09 01:11:06 LOG2 dopset_gen: Result from 'sky2syn': 11393.365052 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2010-Oct-09 01:11:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11393365052.0} 2010-Oct-09 01:11:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-09 01:11:06 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-09 01:11:06 LOG5 begin_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-Oct-09 01:11:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Oct-09 01:11:06 INFO2 adjust_power: Starting to adjust WAPP power 2010-Oct-09 01:11:06 LOG3 vw_send: To DATATAKING: adjpwrif1 2010-Oct-09 01:11:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2010-Oct-09 01:11:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:11:06 START begin_task: Starting task 'waiting on adjpwrif1' 2010-Oct-09 01:11:06 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-Oct-09 01:11:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11393365052.0} 2010-Oct-09 01:11:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-09 01:11:06 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2010-Oct-09 01:11:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:11:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:11:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:11:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:11:09 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 01:11:09 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2010-Oct-09 01:11:09 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-Oct-09 01:11:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2010-Oct-09 01:11:09 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Oct-09 01:11:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Oct-09 01:11:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:11:09 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Oct-09 01:11:09 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2010-Oct-09 01:11:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:11:09 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Oct-09 01:11:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:11:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:11:10 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 01:11:10 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Oct-09 01:11:10 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2010-Oct-09 01:11:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Oct-09 01:11:10 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-09 01:11:10 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Oct-09 01:11:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Oct-09 01:11:10 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2010-Oct-09 01:11:10 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2010-Oct-09 01:11:10 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2010-Oct-09 01:11:10 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2010-Oct-09 01:11:10 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Oct-09 01:11:10 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2010-Oct-09 01:11:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:11:11 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 12 8 dB 2010-Oct-09 01:11:11 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2010-Oct-09 01:11:11 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2010-Oct-09 01:11:11 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2010-Oct-09 01:11:11 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2010-Oct-09 01:11:11 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 14 0 dB 2010-Oct-09 01:11:11 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 2 11 dB 2010-Oct-09 01:11:11 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 3 14 dB 2010-Oct-09 01:11:11 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Oct-09 01:11:11 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Oct-09 01:11:11 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2010-Oct-09 01:11:11 INFO2 wapp_adjpwr: WAPP power: 0.988 0.978 1.100 1.083 2010-Oct-09 01:11:11 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-09 01:11:11 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Oct-09 01:11:11 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Oct-09 01:11:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:11:11 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-09 01:11:11 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Oct-09 01:11:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-09 01:11:11 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-09 01:11:11 LOG5 finish_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-Oct-09 01:11:11 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Oct-09 01:11:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:11:11 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-09 01:11:11 LOG5 end_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-Oct-09 01:11:11 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON stat_onoff_on {ON scan}' 2010-Oct-09 01:11:11 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-09 01:11:11 LOG5 begin_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Oct-09 01:11:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for ON scan ...} 2010-Oct-09 01:11:11 INFO2 take_data: Starting WAPP 300-second scan: 28200001 2010-Oct-09 01:11:12 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-09 01:11:12 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-Oct-09 01:11:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-09 01:11:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2010-Oct-09 01:11:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18673.00 2010-Oct-09 01:11:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11393.365052 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-09 01:11:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1393.365052 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:11:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1393.365052 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:11:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1393.365052 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:11:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1393.365052 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:11:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804181 != 85804182 diff = 1)! 2010-Oct-09 01:11:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804181 != 85804182 diff = 1)! 2010-Oct-09 01:11:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804181 != 85804182 diff = 1)! 2010-Oct-09 01:11:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764078 != 85764077 diff = 1)! 2010-Oct-09 01:11:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804164 != 85804163 diff = 1)! 2010-Oct-09 01:11:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804164 != 85804163 diff = 1)! 2010-Oct-09 01:11:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804164 != 85804163 diff = 1)! 2010-Oct-09 01:11:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804181 != 85804182 diff = 1)! 2010-Oct-09 01:11:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804181 != 85804182 diff = 1)! 2010-Oct-09 01:11:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804181 != 85804182 diff = 1)! 2010-Oct-09 01:12:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764082 != 85764081 diff = 1)! 2010-Oct-09 01:12:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764082 != 85764081 diff = 1)! 2010-Oct-09 01:12:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764082 != 85764081 diff = 1)! 2010-Oct-09 01:12:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764082 != 85764081 diff = 1)! 2010-Oct-09 01:12:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85775234 != 85775235 diff = 1)! 2010-Oct-09 01:12:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85775234 != 85775235 diff = 1)! 2010-Oct-09 01:12:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85775234 != 85775235 diff = 1)! 2010-Oct-09 01:12:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85775234 != 85775235 diff = 1)! 2010-Oct-09 01:12:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85775234 != 85775235 diff = 1)! 2010-Oct-09 01:12:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85775234 != 85775235 diff = 1)! 2010-Oct-09 01:12:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764084 != 85764083 diff = 1)! 2010-Oct-09 01:12:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764084 != 85764083 diff = 1)! 2010-Oct-09 01:12:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764084 != 85764083 diff = 1)! 2010-Oct-09 01:12:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764084 != 85764083 diff = 1)! 2010-Oct-09 01:12:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764087 != 85764088 diff = 1)! 2010-Oct-09 01:12:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764087 != 85764088 diff = 1)! 2010-Oct-09 01:12:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85764087 != 85764088 diff = 1)! 2010-Oct-09 01:12:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764087 != 85764088 diff = 1)! 2010-Oct-09 01:12:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85764087 != 85764088 diff = 1)! 2010-Oct-09 01:12:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85764087 != 85764088 diff = 1)! 2010-Oct-09 01:12:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764093 != 85764092 diff = 1)! 2010-Oct-09 01:13:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85778668 != 85778667 diff = 1)! 2010-Oct-09 01:13:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85778668 != 85778667 diff = 1)! 2010-Oct-09 01:13:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85778668 != 85778667 diff = 1)! 2010-Oct-09 01:13:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85778668 != 85778667 diff = 1)! 2010-Oct-09 01:13:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85778668 != 85778667 diff = 1)! 2010-Oct-09 01:13:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85770352 != 85770351 diff = 1)! 2010-Oct-09 01:14:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804196 != 85804195 diff = 1)! 2010-Oct-09 01:14:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804196 != 85804195 diff = 1)! 2010-Oct-09 01:14:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804196 != 85804195 diff = 1)! 2010-Oct-09 01:14:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804196 != 85804195 diff = 1)! 2010-Oct-09 01:14:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764053 != 85764052 diff = 1)! 2010-Oct-09 01:14:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764053 != 85764052 diff = 1)! 2010-Oct-09 01:14:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764053 != 85764052 diff = 1)! 2010-Oct-09 01:14:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764053 != 85764052 diff = 1)! 2010-Oct-09 01:14:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764053 != 85764052 diff = 1)! 2010-Oct-09 01:14:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764053 != 85764052 diff = 1)! 2010-Oct-09 01:14:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764053 != 85764052 diff = 1)! 2010-Oct-09 01:14:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764053 != 85764052 diff = 1)! 2010-Oct-09 01:14:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764053 != 85764052 diff = 1)! 2010-Oct-09 01:14:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85802522 != 85802521 diff = 1)! 2010-Oct-09 01:14:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85802522 != 85802521 diff = 1)! 2010-Oct-09 01:14:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85802522 != 85802521 diff = 1)! 2010-Oct-09 01:14:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85802522 != 85802521 diff = 1)! 2010-Oct-09 01:14:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85802522 != 85802521 diff = 1)! 2010-Oct-09 01:14:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85802522 != 85802521 diff = 1)! 2010-Oct-09 01:14:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85802522 != 85802521 diff = 1)! 2010-Oct-09 01:14:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85788476 != 85788475 diff = 1)! 2010-Oct-09 01:15:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85785672 != 85785671 diff = 1)! 2010-Oct-09 01:15:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804173 != 85804174 diff = 1)! 2010-Oct-09 01:15:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804173 != 85804174 diff = 1)! 2010-Oct-09 01:15:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804173 != 85804174 diff = 1)! 2010-Oct-09 01:15:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804173 != 85804174 diff = 1)! 2010-Oct-09 01:15:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804173 != 85804174 diff = 1)! 2010-Oct-09 01:15:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764078 != 85764077 diff = 1)! 2010-Oct-09 01:16:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804182 != 85804181 diff = 1)! 2010-Oct-09 01:16:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-09 01:16:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-09 01:16:13 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-Oct-09 01:16:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-09 01:16:13 LOG5 end_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Oct-09 01:16:13 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2010-Oct-09 01:16:13 LOG2 onoff_wapp: Parameters: RA-offset: -90.707099999999855 arcminutes wait: 60 secs 2010-Oct-09 01:16:13 LOG4 track_offsets: Calling 'track_offsets -90.707099999999855 0.0 main small' 2010-Oct-09 01:16:13 START begin_task: Starting task 'sending telescope offsets' 2010-Oct-09 01:16:13 LOG5 begin_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2010-Oct-09 01:16:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2010-Oct-09 01:16:13 INFO2 track_offsets: Starting to send new offsets 2010-Oct-09 01:16:13 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023026+254503" 2010-Oct-09 01:16:13 LOG3 vw_send: To DATATAKING: pnt tr 23025.800000 254503.390000 -CJ -o -UD -1.51178 0.0 -CH 2010-Oct-09 01:16:13 STOP finish_task: Finishing task 'sending telescope offsets' 2010-Oct-09 01:16:13 LOG5 finish_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2010-Oct-09 01:16:13 INFO2 finish_task: DONE finished sending: telescope offsets 2010-Oct-09 01:16:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:16:13 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2010-Oct-09 01:16:13 LOG5 end_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2010-Oct-09 01:16:13 INFO2 lstwait: Waiting for 59.8 secs from LST 02:00:05 to LST 02:01:05 ... 2010-Oct-09 01:16:13 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836175999999789 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Oct-09 01:16:13 START begin_task: Starting task 'waiting on wait on LST' 2010-Oct-09 01:16:13 LOG5 begin_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2010-Oct-09 01:16:13 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023026+254503" 2010-Oct-09 01:16:13 LOG4 got_cormsg: From DATATAKING: pnt tr 23025.800000 254503.390000 -CJ -o -UD -1.51178 0.0 -CH 2010-Oct-09 01:16:13 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-09 01:16:46 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'j023026+254503' (after 33 seconds) 2010-Oct-09 01:16:46 LOG3 wait_and_tell_when_on_source: The telescope arrived at source with 27 seconds to spare (33 < 60 seconds) 2010-Oct-09 01:17:13 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-Oct-09 01:17:13 LOG5 end_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2010-Oct-09 01:17:13 LOG4 lstwait: Finished waiting 0.16 seconds late 2010-Oct-09 01:17:13 INFO3 lstwait: Finished waiting 2010-Oct-09 01:17:13 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Oct-09 01:17:13 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF stat_onoff_off {OFF scan}' 2010-Oct-09 01:17:13 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-09 01:17:13 LOG5 begin_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2010-Oct-09 01:17:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for OFF scan ...} 2010-Oct-09 01:17:13 INFO2 take_data: Starting WAPP 300-second scan: 28200002 2010-Oct-09 01:17:14 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-09 01:17:14 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2010-Oct-09 01:17:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-09 01:17:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2010-Oct-09 01:17:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19035.00 2010-Oct-09 01:17:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11393.365052 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-09 01:17:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1393.365052 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:17:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1393.365052 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:17:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1393.365052 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:17:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1393.365052 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:17:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804158 != 85804157 diff = 1)! 2010-Oct-09 01:17:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804158 != 85804157 diff = 1)! 2010-Oct-09 01:17:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804158 != 85804157 diff = 1)! 2010-Oct-09 01:17:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804158 != 85804157 diff = 1)! 2010-Oct-09 01:17:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804158 != 85804157 diff = 1)! 2010-Oct-09 01:17:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804158 != 85804157 diff = 1)! 2010-Oct-09 01:17:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804158 != 85804157 diff = 1)! 2010-Oct-09 01:18:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764071 != 85764072 diff = 1)! 2010-Oct-09 01:18:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764071 != 85764072 diff = 1)! 2010-Oct-09 01:18:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764071 != 85764072 diff = 1)! 2010-Oct-09 01:18:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85964636 != 85964635 diff = 1)! 2010-Oct-09 01:18:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85964636 != 85964635 diff = 1)! 2010-Oct-09 01:18:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85790114 != 85790113 diff = 1)! 2010-Oct-09 01:18:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85790114 != 85790113 diff = 1)! 2010-Oct-09 01:18:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85790114 != 85790113 diff = 1)! 2010-Oct-09 01:18:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85790114 != 85790113 diff = 1)! 2010-Oct-09 01:18:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85790114 != 85790113 diff = 1)! 2010-Oct-09 01:18:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85790114 != 85790113 diff = 1)! 2010-Oct-09 01:18:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85790114 != 85790113 diff = 1)! 2010-Oct-09 01:18:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85790114 != 85790113 diff = 1)! 2010-Oct-09 01:18:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764064 != 85764063 diff = 1)! 2010-Oct-09 01:18:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804184 != 85804183 diff = 1)! 2010-Oct-09 01:18:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804175 != 85804176 diff = 1)! 2010-Oct-09 01:18:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804175 != 85804176 diff = 1)! 2010-Oct-09 01:18:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85804175 != 85804176 diff = 1)! 2010-Oct-09 01:18:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804175 != 85804176 diff = 1)! 2010-Oct-09 01:18:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85804175 != 85804176 diff = 1)! 2010-Oct-09 01:19:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804174 != 85804173 diff = 1)! 2010-Oct-09 01:19:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764070 != 85764069 diff = 1)! 2010-Oct-09 01:19:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764070 != 85764069 diff = 1)! 2010-Oct-09 01:19:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764070 != 85764069 diff = 1)! 2010-Oct-09 01:19:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764070 != 85764069 diff = 1)! 2010-Oct-09 01:19:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764070 != 85764069 diff = 1)! 2010-Oct-09 01:19:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764070 != 85764069 diff = 1)! 2010-Oct-09 01:19:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85785512 != 85785511 diff = 1)! 2010-Oct-09 01:19:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85785512 != 85785511 diff = 1)! 2010-Oct-09 01:19:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85785512 != 85785511 diff = 1)! 2010-Oct-09 01:19:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85785512 != 85785511 diff = 1)! 2010-Oct-09 01:19:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85785512 != 85785511 diff = 1)! 2010-Oct-09 01:19:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85785512 != 85785511 diff = 1)! 2010-Oct-09 01:19:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85785512 != 85785511 diff = 1)! 2010-Oct-09 01:19:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85785512 != 85785511 diff = 1)! 2010-Oct-09 01:19:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764056 != 85764058 diff = 2)! 2010-Oct-09 01:19:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764056 != 85764057 diff = 1)! 2010-Oct-09 01:19:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764056 != 85764058 diff = 2)! 2010-Oct-09 01:19:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85764056 != 85764057 diff = 1)! 2010-Oct-09 01:19:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764056 != 85764058 diff = 2)! 2010-Oct-09 01:19:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85764056 != 85764057 diff = 1)! 2010-Oct-09 01:19:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85764056 != 85764057 diff = 1)! 2010-Oct-09 01:19:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764056 != 85764057 diff = 1)! 2010-Oct-09 01:19:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764056 != 85764057 diff = 1)! 2010-Oct-09 01:20:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804161 != 85804162 diff = 1)! 2010-Oct-09 01:20:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804202 != 85804201 diff = 1)! 2010-Oct-09 01:20:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804202 != 85804201 diff = 1)! 2010-Oct-09 01:20:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804202 != 85804201 diff = 1)! 2010-Oct-09 01:21:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764058 != 85764057 diff = 1)! 2010-Oct-09 01:21:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764058 != 85764057 diff = 1)! 2010-Oct-09 01:21:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764058 != 85764057 diff = 1)! 2010-Oct-09 01:21:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764068 != 85764067 diff = 1)! 2010-Oct-09 01:21:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764068 != 85764067 diff = 1)! 2010-Oct-09 01:21:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764068 != 85764067 diff = 1)! 2010-Oct-09 01:21:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764068 != 85764067 diff = 1)! 2010-Oct-09 01:21:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764068 != 85764067 diff = 1)! 2010-Oct-09 01:21:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764068 != 85764067 diff = 1)! 2010-Oct-09 01:21:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764068 != 85764067 diff = 1)! 2010-Oct-09 01:21:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764068 != 85764067 diff = 1)! 2010-Oct-09 01:21:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764080 != 85764079 diff = 1)! 2010-Oct-09 01:21:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85767729 != 85767730 diff = 1)! 2010-Oct-09 01:21:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85767729 != 85767730 diff = 1)! 2010-Oct-09 01:21:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85767729 != 85767730 diff = 1)! 2010-Oct-09 01:21:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85797397 != 85797398 diff = 1)! 2010-Oct-09 01:21:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764080 != 85764079 diff = 1)! 2010-Oct-09 01:21:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764080 != 85764079 diff = 1)! 2010-Oct-09 01:21:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764080 != 85764079 diff = 1)! 2010-Oct-09 01:21:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764080 != 85764079 diff = 1)! 2010-Oct-09 01:21:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764080 != 85764079 diff = 1)! 2010-Oct-09 01:21:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764080 != 85764079 diff = 1)! 2010-Oct-09 01:21:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764080 != 85764079 diff = 1)! 2010-Oct-09 01:21:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804159 != 85804160 diff = 1)! 2010-Oct-09 01:21:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85804159 != 85804160 diff = 1)! 2010-Oct-09 01:21:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804159 != 85804160 diff = 1)! 2010-Oct-09 01:22:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764074 != 85764073 diff = 1)! 2010-Oct-09 01:22:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85776134 != 85776133 diff = 1)! 2010-Oct-09 01:22:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85776134 != 85776133 diff = 1)! 2010-Oct-09 01:22:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85776134 != 85776133 diff = 1)! 2010-Oct-09 01:22:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85776134 != 85776133 diff = 1)! 2010-Oct-09 01:22:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85776134 != 85776133 diff = 1)! 2010-Oct-09 01:22:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85776134 != 85776133 diff = 1)! 2010-Oct-09 01:22:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85776134 != 85776133 diff = 1)! 2010-Oct-09 01:22:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-09 01:22:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-09 01:22:15 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2010-Oct-09 01:22:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-09 01:22:15 LOG5 end_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2010-Oct-09 01:22:15 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2010-Oct-09 01:22:15 START begin_task: Starting task 'WAPP calibration' 2010-Oct-09 01:22:15 LOG5 begin_task: Level: (2) ID = <10035> Status = 0 0 0 0 ok 2010-Oct-09 01:22:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Oct-09 01:22:15 START begin_task: Starting task 'selecting calibration type' 2010-Oct-09 01:22:15 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2010-Oct-09 01:22:15 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-09 01:22:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-09 01:22:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:22:15 START begin_task: Starting task 'waiting on setcal' 2010-Oct-09 01:22:15 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-Oct-09 01:22:15 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-09 01:22:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:22:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:22:15 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 01:22:15 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-09 01:22:15 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-Oct-09 01:22:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-09 01:22:15 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-09 01:22:15 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2010-Oct-09 01:22:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Oct-09 01:22:15 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Oct-09 01:22:15 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Oct-09 01:22:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-09 01:22:15 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2010-Oct-09 01:22:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:22:15 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-09 01:22:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Oct-09 01:22:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-09 01:22:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-09 01:22:15 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2010-Oct-09 01:22:16 LOG4 take_data: Calling 'take_data 10 10 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Oct-09 01:22:16 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-09 01:22:16 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-Oct-09 01:22:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Oct-09 01:22:16 INFO2 take_data: Starting WAPP 10-second scan: 28200003 2010-Oct-09 01:22:16 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-09 01:22:16 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2010-Oct-09 01:22:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-09 01:22:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Oct-09 01:22:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19337.00 2010-Oct-09 01:22:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11393.365052 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-09 01:22:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1393.365052 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:22:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1393.365052 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:22:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1393.365052 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:22:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1393.365052 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:22:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-09 01:22:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-09 01:22:27 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2010-Oct-09 01:22:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-09 01:22:27 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-Oct-09 01:22:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Oct-09 01:22:27 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Oct-09 01:22:27 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Oct-09 01:22:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-09 01:22:27 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2010-Oct-09 01:22:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (857845036 != 857845034 diff = 2)! 2010-Oct-09 01:22:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (857845036 != 857845034 diff = 2)! 2010-Oct-09 01:22:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (857845036 != 857845034 diff = 2)! 2010-Oct-09 01:22:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (857845036 != 857845034 diff = 2)! 2010-Oct-09 01:22:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (857845036 != 857845034 diff = 2)! 2010-Oct-09 01:22:27 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-09 01:22:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (857845036 != 857845034 diff = 2)! 2010-Oct-09 01:22:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (857845036 != 857845034 diff = 2)! 2010-Oct-09 01:22:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (857845036 != 857845035 diff = 1)! 2010-Oct-09 01:22:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Oct-09 01:22:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-09 01:22:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-09 01:22:27 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2010-Oct-09 01:22:27 LOG4 take_data: Calling 'take_data 10 10 CAL OFF stat_cal_off {CAL-OFF spectra}' 2010-Oct-09 01:22:27 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-09 01:22:27 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2010-Oct-09 01:22:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2010-Oct-09 01:22:27 INFO2 take_data: Starting WAPP 10-second scan: 28200004 2010-Oct-09 01:22:28 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-09 01:22:28 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2010-Oct-09 01:22:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-09 01:22:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2010-Oct-09 01:22:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19349.00 2010-Oct-09 01:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11393.365052 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-09 01:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1393.365052 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1393.365052 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1393.365052 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1393.365052 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:22:39 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2010-Oct-09 01:22:39 INFO1 WAPP=2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-09 01:22:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-09 01:22:39 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2010-Oct-09 01:22:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-09 01:22:39 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2010-Oct-09 01:22:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-09 01:22:39 STOP finish_task: Finishing task 'WAPP calibration' 2010-Oct-09 01:22:39 LOG5 finish_task: Level: (2) ID = <10035> Status = 0 0 0 0 ok 2010-Oct-09 01:22:39 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Oct-09 01:22:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:22:39 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Oct-09 01:22:39 LOG5 end_task: Level: (2) ID = <10035> Status = 0 0 0 0 ok 2010-Oct-09 01:22:39 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-09 01:22:39 LOG5 begin_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2010-Oct-09 01:22:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-09 01:22:39 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-09 01:22:39 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023026+254503" 2010-Oct-09 01:22:39 LOG3 vw_send: To DATATAKING: pnt tr 23025.800000 254503.390000 -CJ 2010-Oct-09 01:22:39 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-09 01:22:39 LOG5 finish_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2010-Oct-09 01:22:39 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-09 01:22:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:22:39 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-09 01:22:39 LOG5 end_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2010-Oct-09 01:22:39 STOP finish_task: Finishing task 'standard on/off' 2010-Oct-09 01:22:39 LOG5 finish_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2010-Oct-09 01:22:39 DONE finish_task: DONE finished pattern: standard on/off 2010-Oct-09 01:22:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-09 01:22:40 END end_task: Finishing task 'standard on/off' with status 'OK' 2010-Oct-09 01:22:40 LOG5 end_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2010-Oct-09 01:22:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023026+254503" 2010-Oct-09 01:22:40 INFO1 WAPP=1-start_spectra: DONE with spectral line observation 2010-Oct-09 01:22:40 LOG4 got_cormsg: From DATATAKING: pnt tr 23025.800000 254503.390000 -CJ 2010-Oct-09 01:22:40 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-09 01:22:45 COMMAND CIMA-send_to_exec: Sending command to point to a source 2010-Oct-09 01:22:45 LOG4 exec_msg: From OBSERVER: track_new_source j023539+244704 023539.24 244704.13 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 11104 Topocentric velocity(optical) 0 0 0.0 0.0 0 2010-Oct-09 01:22:45 LOG1 track_new_source: Calling 'track_new_source j023539+244704 023539.24 244704.13 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 11104 Topocentric velocity(optical) 0 0 0.0 0.0 0' 2010-Oct-09 01:22:45 BEGIN begin_task: Starting task 'selecting new source' 2010-Oct-09 01:22:45 LOG5 begin_task: Level: (1) ID = <10045> Status = 0 0 0 0 ok 2010-Oct-09 01:22:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {j023539+244704} INFO {Selecting source 'j023539+244704' ...} 2010-Oct-09 01:22:45 LOG3 track_source: Calling 'track_source j023539+244704 023539.24 244704.13 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 11104 Topocentric velocity(optical)' 2010-Oct-09 01:22:45 START begin_task: Starting task 'sending tracking commands' 2010-Oct-09 01:22:45 LOG5 begin_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2010-Oct-09 01:22:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {j023539+244704} INFO {Slewing to source 'j023539+244704' ...} 2010-Oct-09 01:22:45 INFO1 track_source: Starting to track j023539+244704 2010-Oct-09 01:22:45 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023539+244704" 2010-Oct-09 01:22:45 LOG3 vw_send: To DATATAKING: set ra 023539.24 2010-Oct-09 01:22:45 LOG3 vw_send: To DATATAKING: set dec 244704.13 2010-Oct-09 01:22:45 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Oct-09 01:22:45 LOG3 vw_send: To DATATAKING: pnt tr 023539.24 244704.13 -CJ 2010-Oct-09 01:22:45 LOG3 vw_send: To DATATAKING: dopsetvel 11104 topo 2010-Oct-09 01:22:45 STOP finish_task: Finishing task 'sending tracking commands' 2010-Oct-09 01:22:45 LOG5 finish_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2010-Oct-09 01:22:45 INFO2 finish_task: DONE finished sending: tracking commands 2010-Oct-09 01:22:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:22:45 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Oct-09 01:22:45 LOG5 end_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2010-Oct-09 01:22:45 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2010-Oct-09 01:22:45 START begin_task: Starting task 'applying pointing corrections' 2010-Oct-09 01:22:45 LOG5 begin_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2010-Oct-09 01:22:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2010-Oct-09 01:22:45 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-09 01:22:45 STOP finish_task: Finishing task 'applying pointing corrections' 2010-Oct-09 01:22:45 LOG5 finish_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2010-Oct-09 01:22:45 INFO2 finish_task: DONE finished applying: pointing corrections 2010-Oct-09 01:22:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:22:45 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2010-Oct-09 01:22:45 LOG5 end_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2010-Oct-09 01:22:45 STOP finish_task: Finishing task 'selecting new source' 2010-Oct-09 01:22:45 LOG5 finish_task: Level: (1) ID = <10045> Status = 0 0 0 0 ok 2010-Oct-09 01:22:45 DONE finish_task: DONE finished selecting: new source 2010-Oct-09 01:22:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-09 01:22:45 END end_task: Finishing task 'selecting new source' with status 'OK' 2010-Oct-09 01:22:45 LOG5 end_task: Level: (1) ID = <10045> Status = 0 0 0 0 ok 2010-Oct-09 01:22:45 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023539+244704" 2010-Oct-09 01:22:45 LOG4 got_cormsg: From DATATAKING: set ra 023539.24 2010-Oct-09 01:22:45 LOG4 got_cormsg: From DATATAKING: vw% 023539.24 2010-Oct-09 01:22:45 LOG4 got_cormsg: From DATATAKING: 2010-Oct-09 01:22:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:22:46 LOG4 got_cormsg: From DATATAKING: set dec 244704.13 2010-Oct-09 01:22:46 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Oct-09 01:22:46 LOG4 got_cormsg: From DATATAKING: pnt tr 023539.24 244704.13 -CJ 2010-Oct-09 01:22:46 LOG4 got_cormsg: From DATATAKING: dopsetvel 11104 topo 2010-Oct-09 01:22:46 LOG4 got_cormsg: From DATATAKING: 244704.13 2010-Oct-09 01:22:46 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2010-Oct-09 01:22:46 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-09 01:22:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:22:49 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2010-Oct-09 01:22:49 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 off lcorcal each first one 2010-Oct-09 01:22:49 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 off lcorcal each first one' 2010-Oct-09 01:22:49 BEGIN begin_task: Starting task 'standard on/off' 2010-Oct-09 01:22:49 LOG5 begin_task: Level: (1) ID = <10048> Status = 0 0 0 0 ok 2010-Oct-09 01:22:49 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'j023539+244704' 2010-Oct-09 01:22:49 INFO1 onoff_wapp: Starting pattern: Standard on/off 2010-Oct-09 01:22:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2010-Oct-09 01:22:49 START begin_task: Starting task 'waiting on telescope' 2010-Oct-09 01:22:49 LOG5 begin_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2010-Oct-09 01:22:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-09 01:22:49 LOG3 waittrk: Start waittrk 5 2010-Oct-09 01:22:49 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-09 01:22:49 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2010-Oct-09 01:22:54 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-09 01:22:54 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2010-Oct-09 01:22:54 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-09 01:22:54 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-Oct-09 01:23:19 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-09 01:23:19 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-Oct-09 01:23:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-09 01:23:19 INFO2 waittrk: Now tracking j023539+244704 2010-Oct-09 01:23:19 LOG4 waittrk: Current telescope position: Az = 224.51 ZA = 9.35 2010-Oct-09 01:23:19 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-09 01:23:19 LOG5 finish_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2010-Oct-09 01:23:19 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-09 01:23:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:23:19 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-09 01:23:19 LOG5 end_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2010-Oct-09 01:23:19 START begin_task: Starting task 'selecting calibration type' 2010-Oct-09 01:23:19 LOG5 begin_task: Level: (2) ID = <10052> Status = 0 0 0 0 ok 2010-Oct-09 01:23:19 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-09 01:23:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-09 01:23:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:23:19 START begin_task: Starting task 'waiting on setcal' 2010-Oct-09 01:23:19 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-Oct-09 01:23:19 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-09 01:23:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:23:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:23:20 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 01:23:20 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-09 01:23:20 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-Oct-09 01:23:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-09 01:23:20 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-09 01:23:20 LOG5 end_task: Level: (2) ID = <10052> Status = 0 0 0 0 ok 2010-Oct-09 01:23:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2010-Oct-09 01:23:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2010-Oct-09 01:23:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2010-Oct-09 01:23:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2010-Oct-09 01:23:20 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2010-Oct-09 01:23:20 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2010-Oct-09 01:23:20 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-09 01:23:20 LOG5 begin_task: Level: (2) ID = <10054> Status = 0 0 0 0 ok 2010-Oct-09 01:23:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-09 01:23:20 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-09 01:23:20 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023539+244704" 2010-Oct-09 01:23:20 LOG3 vw_send: To DATATAKING: pnt tr 23539.240000 244704.130000 -CJ 2010-Oct-09 01:23:20 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-09 01:23:20 LOG5 finish_task: Level: (2) ID = <10054> Status = 0 0 0 0 ok 2010-Oct-09 01:23:20 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-09 01:23:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:23:20 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-09 01:23:20 LOG5 end_task: Level: (2) ID = <10054> Status = 0 0 0 0 ok 2010-Oct-09 01:23:20 START begin_task: Starting task 'waiting on telescope' 2010-Oct-09 01:23:20 LOG5 begin_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2010-Oct-09 01:23:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-09 01:23:20 LOG3 waittrk: Start waittrk 5 2010-Oct-09 01:23:20 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-09 01:23:20 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-Oct-09 01:23:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2010-Oct-09 01:23:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:23:20 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023539+244704" 2010-Oct-09 01:23:20 LOG4 got_cormsg: From DATATAKING: pnt tr 23539.240000 244704.130000 -CJ 2010-Oct-09 01:23:20 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-09 01:23:20 NOTE WAPPDATA-new_file: New FITS file: wapp.20101009.a2048.0001.fits 2010-Oct-09 01:23:21 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20101009.a2048.0001.fits} 2010-Oct-09 01:23:25 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-09 01:23:25 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-Oct-09 01:23:25 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-09 01:23:25 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2010-Oct-09 01:23:27 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-09 01:23:27 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2010-Oct-09 01:23:27 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-09 01:23:27 INFO2 waittrk: Now tracking j023539+244704 2010-Oct-09 01:23:27 LOG4 waittrk: Current telescope position: Az = 224.38 ZA = 9.33 2010-Oct-09 01:23:27 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-09 01:23:27 LOG5 finish_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2010-Oct-09 01:23:27 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-09 01:23:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:23:27 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-09 01:23:27 LOG5 end_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2010-Oct-09 01:23:27 LOG5 antvel: Calling 'antvel 23539.240000 244704.130000 J Topocentric 0' 2010-Oct-09 01:23:27 LOG2 antvel: Precessing RA = 02:35:39.2 Dec = +24:47:04.1 Epoch = 2010.77223 J 2010-Oct-09 01:23:27 LOG2 antvel: Computed apparent RA = 02:36:18.9 Dec = +24:50:02.2 2010-Oct-09 01:23:27 LOG2 antvel: Parameters to Doppler: Topocentric 19407 2010 282 0.0 2010-Oct-09 01:23:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Oct-09 01:23:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=11104.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-Oct-09 01:23:27 INFO4 dopset_gen: New sky frequencies: 1369.674439 1369.674439 1369.674439 1369.674439 1369.674439 1369.674439 1369.674439 1369.674439 1369.674439 2010-Oct-09 01:23:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1369.674439 sky0=1369.674439 sky1=1369.674439 sky2=1369.674439 sky3=1369.674439 sky4=1369.674439 sky5=1369.674439 sky6=1369.674439 sky7=1369.674439 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2010-Oct-09 01:23:27 LOG2 dopset_gen: Result from 'sky2syn': 11369.674439 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2010-Oct-09 01:23:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11369674439.0} 2010-Oct-09 01:23:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-09 01:23:27 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-09 01:23:27 LOG5 begin_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2010-Oct-09 01:23:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Oct-09 01:23:27 INFO2 adjust_power: Starting to adjust WAPP power 2010-Oct-09 01:23:27 LOG3 vw_send: To DATATAKING: adjpwrif1 2010-Oct-09 01:23:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2010-Oct-09 01:23:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:23:28 START begin_task: Starting task 'waiting on adjpwrif1' 2010-Oct-09 01:23:28 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2010-Oct-09 01:23:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11369674439.0} 2010-Oct-09 01:23:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-09 01:23:28 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2010-Oct-09 01:23:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:23:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:23:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:23:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:23:28 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 01:23:28 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2010-Oct-09 01:23:28 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2010-Oct-09 01:23:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2010-Oct-09 01:23:28 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Oct-09 01:23:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Oct-09 01:23:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:23:28 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Oct-09 01:23:28 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-Oct-09 01:23:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:23:28 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Oct-09 01:23:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:23:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:23:28 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 01:23:28 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Oct-09 01:23:28 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-Oct-09 01:23:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Oct-09 01:23:28 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-09 01:23:28 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2010-Oct-09 01:23:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Oct-09 01:23:28 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2010-Oct-09 01:23:28 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2010-Oct-09 01:23:28 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2010-Oct-09 01:23:28 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2010-Oct-09 01:23:28 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Oct-09 01:23:28 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2010-Oct-09 01:23:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:23:29 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 13 8 dB 2010-Oct-09 01:23:29 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2010-Oct-09 01:23:29 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2010-Oct-09 01:23:29 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2010-Oct-09 01:23:29 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2010-Oct-09 01:23:29 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 15 0 dB 2010-Oct-09 01:23:29 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 2 12 dB 2010-Oct-09 01:23:29 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 3 15 dB 2010-Oct-09 01:23:29 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Oct-09 01:23:29 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Oct-09 01:23:29 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2010-Oct-09 01:23:29 INFO2 wapp_adjpwr: WAPP power: 1.001 1.064 1.153 1.175 2010-Oct-09 01:23:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-09 01:23:29 LOG5 finish_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2010-Oct-09 01:23:29 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Oct-09 01:23:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:23:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-09 01:23:29 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2010-Oct-09 01:23:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-09 01:23:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-09 01:23:29 LOG5 finish_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2010-Oct-09 01:23:29 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Oct-09 01:23:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:23:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-09 01:23:29 LOG5 end_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2010-Oct-09 01:23:29 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON stat_onoff_on {ON scan}' 2010-Oct-09 01:23:29 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-09 01:23:29 LOG5 begin_task: Level: (2) ID = <10063> Status = 0 0 0 0 ok 2010-Oct-09 01:23:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for ON scan ...} 2010-Oct-09 01:23:29 INFO2 take_data: Starting WAPP 300-second scan: 28200005 2010-Oct-09 01:23:30 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-09 01:23:30 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-Oct-09 01:23:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-09 01:23:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2010-Oct-09 01:23:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19411.00 2010-Oct-09 01:23:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11369.674439 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-09 01:23:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1369.674439 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:23:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1369.674439 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:23:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1369.674439 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:23:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1369.674439 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:24:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764084 != 85764083 diff = 1)! 2010-Oct-09 01:24:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804188 != 85804187 diff = 1)! 2010-Oct-09 01:24:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804188 != 85804187 diff = 1)! 2010-Oct-09 01:24:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804188 != 85804187 diff = 1)! 2010-Oct-09 01:24:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804188 != 85804187 diff = 1)! 2010-Oct-09 01:24:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804188 != 85804187 diff = 1)! 2010-Oct-09 01:24:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804166 != 85804165 diff = 1)! 2010-Oct-09 01:24:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804166 != 85804165 diff = 1)! 2010-Oct-09 01:25:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85769134 != 85769133 diff = 1)! 2010-Oct-09 01:25:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85769134 != 85769133 diff = 1)! 2010-Oct-09 01:25:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85769134 != 85769132 diff = 2)! 2010-Oct-09 01:25:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85769134 != 85769133 diff = 1)! 2010-Oct-09 01:25:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85769134 != 85769133 diff = 1)! 2010-Oct-09 01:25:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85769134 != 85769133 diff = 1)! 2010-Oct-09 01:25:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85769134 != 85769133 diff = 1)! 2010-Oct-09 01:25:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764074 != 85764073 diff = 1)! 2010-Oct-09 01:25:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804184 != 85804183 diff = 1)! 2010-Oct-09 01:26:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804190 != 85804189 diff = 1)! 2010-Oct-09 01:26:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804190 != 85804189 diff = 1)! 2010-Oct-09 01:26:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804190 != 85804189 diff = 1)! 2010-Oct-09 01:26:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804190 != 85804189 diff = 1)! 2010-Oct-09 01:26:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804190 != 85804189 diff = 1)! 2010-Oct-09 01:26:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804190 != 85804189 diff = 1)! 2010-Oct-09 01:26:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804190 != 85804189 diff = 1)! 2010-Oct-09 01:26:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804190 != 85804189 diff = 1)! 2010-Oct-09 01:26:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804190 != 85804189 diff = 1)! 2010-Oct-09 01:26:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804188 != 85804187 diff = 1)! 2010-Oct-09 01:26:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804188 != 85804187 diff = 1)! 2010-Oct-09 01:26:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804188 != 85804187 diff = 1)! 2010-Oct-09 01:26:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804188 != 85804187 diff = 1)! 2010-Oct-09 01:26:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804188 != 85804187 diff = 1)! 2010-Oct-09 01:26:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804188 != 85804187 diff = 1)! 2010-Oct-09 01:26:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804188 != 85804187 diff = 1)! 2010-Oct-09 01:26:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764106 != 85764105 diff = 1)! 2010-Oct-09 01:26:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764106 != 85764105 diff = 1)! 2010-Oct-09 01:26:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764090 != 85764089 diff = 1)! 2010-Oct-09 01:26:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764090 != 85764089 diff = 1)! 2010-Oct-09 01:26:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764058 != 85764057 diff = 1)! 2010-Oct-09 01:26:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764058 != 85764057 diff = 1)! 2010-Oct-09 01:26:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764058 != 85764057 diff = 1)! 2010-Oct-09 01:26:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764058 != 85764057 diff = 1)! 2010-Oct-09 01:26:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764058 != 85764057 diff = 1)! 2010-Oct-09 01:26:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764058 != 85764057 diff = 1)! 2010-Oct-09 01:26:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764058 != 85764057 diff = 1)! 2010-Oct-09 01:26:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764058 != 85764057 diff = 1)! 2010-Oct-09 01:26:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804192 != 85804191 diff = 1)! 2010-Oct-09 01:27:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764060 != 85764059 diff = 1)! 2010-Oct-09 01:27:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764060 != 85764059 diff = 1)! 2010-Oct-09 01:27:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764060 != 85764059 diff = 1)! 2010-Oct-09 01:27:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764060 != 85764059 diff = 1)! 2010-Oct-09 01:27:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764060 != 85764059 diff = 1)! 2010-Oct-09 01:27:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764060 != 85764059 diff = 1)! 2010-Oct-09 01:27:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764060 != 85764059 diff = 1)! 2010-Oct-09 01:27:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764060 != 85764059 diff = 1)! 2010-Oct-09 01:27:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764098 != 85764097 diff = 1)! 2010-Oct-09 01:27:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764098 != 85764097 diff = 1)! 2010-Oct-09 01:27:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764098 != 85764097 diff = 1)! 2010-Oct-09 01:27:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764098 != 85764097 diff = 1)! 2010-Oct-09 01:27:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764098 != 85764097 diff = 1)! 2010-Oct-09 01:27:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764098 != 85764097 diff = 1)! 2010-Oct-09 01:27:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804177 != 85804176 diff = 1)! 2010-Oct-09 01:27:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804177 != 85804176 diff = 1)! 2010-Oct-09 01:27:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804177 != 85804176 diff = 1)! 2010-Oct-09 01:27:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804177 != 85804176 diff = 1)! 2010-Oct-09 01:27:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804177 != 85804176 diff = 1)! 2010-Oct-09 01:27:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804177 != 85804176 diff = 1)! 2010-Oct-09 01:27:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804177 != 85804176 diff = 1)! 2010-Oct-09 01:27:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85781122 != 85781121 diff = 1)! 2010-Oct-09 01:27:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85779137 != 85779138 diff = 1)! 2010-Oct-09 01:27:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85779137 != 85779138 diff = 1)! 2010-Oct-09 01:27:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85779137 != 85779138 diff = 1)! 2010-Oct-09 01:27:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85779137 != 85779138 diff = 1)! 2010-Oct-09 01:28:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804182 != 85804181 diff = 1)! 2010-Oct-09 01:28:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804182 != 85804181 diff = 1)! 2010-Oct-09 01:28:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804182 != 85804181 diff = 1)! 2010-Oct-09 01:28:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804182 != 85804181 diff = 1)! 2010-Oct-09 01:28:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804182 != 85804181 diff = 1)! 2010-Oct-09 01:28:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804182 != 85804181 diff = 1)! 2010-Oct-09 01:28:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804182 != 85804181 diff = 1)! 2010-Oct-09 01:28:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804182 != 85804181 diff = 1)! 2010-Oct-09 01:28:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804184 != 85804183 diff = 1)! 2010-Oct-09 01:28:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764070 != 85764069 diff = 1)! 2010-Oct-09 01:28:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764070 != 85764069 diff = 1)! 2010-Oct-09 01:28:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-09 01:28:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-09 01:28:31 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-Oct-09 01:28:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-09 01:28:31 LOG5 end_task: Level: (2) ID = <10063> Status = 0 0 0 0 ok 2010-Oct-09 01:28:31 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2010-Oct-09 01:28:31 LOG2 onoff_wapp: Parameters: RA-offset: -90.957300000000046 arcminutes wait: 60 secs 2010-Oct-09 01:28:31 LOG4 track_offsets: Calling 'track_offsets -90.957300000000046 0.0 main small' 2010-Oct-09 01:28:31 START begin_task: Starting task 'sending telescope offsets' 2010-Oct-09 01:28:31 LOG5 begin_task: Level: (2) ID = <10065> Status = 0 0 0 0 ok 2010-Oct-09 01:28:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2010-Oct-09 01:28:31 INFO2 track_offsets: Starting to send new offsets 2010-Oct-09 01:28:31 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023539+244704" 2010-Oct-09 01:28:31 LOG3 vw_send: To DATATAKING: pnt tr 23539.240000 244704.130000 -CJ -o -UD -1.51596 0.0 -CH 2010-Oct-09 01:28:31 STOP finish_task: Finishing task 'sending telescope offsets' 2010-Oct-09 01:28:31 LOG5 finish_task: Level: (2) ID = <10065> Status = 0 0 0 0 ok 2010-Oct-09 01:28:31 INFO2 finish_task: DONE finished sending: telescope offsets 2010-Oct-09 01:28:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:28:31 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2010-Oct-09 01:28:31 LOG5 end_task: Level: (2) ID = <10065> Status = 0 0 0 0 ok 2010-Oct-09 01:28:31 INFO2 lstwait: Waiting for 59.8 secs from LST 02:12:25 to LST 02:13:25 ... 2010-Oct-09 01:28:31 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836175999999789 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Oct-09 01:28:31 START begin_task: Starting task 'waiting on wait on LST' 2010-Oct-09 01:28:31 LOG5 begin_task: Level: (2) ID = <10066> Status = 0 0 0 0 ok 2010-Oct-09 01:28:31 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023539+244704" 2010-Oct-09 01:28:31 LOG4 got_cormsg: From DATATAKING: pnt tr 23539.240000 244704.130000 -CJ -o -UD -1.51596 0.0 -CH 2010-Oct-09 01:28:31 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-09 01:29:03 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'j023539+244704' (after 32 seconds) 2010-Oct-09 01:29:03 LOG3 wait_and_tell_when_on_source: The telescope arrived at source with 28 seconds to spare (32 < 60 seconds) 2010-Oct-09 01:29:31 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-Oct-09 01:29:31 LOG5 end_task: Level: (2) ID = <10066> Status = 0 0 0 0 ok 2010-Oct-09 01:29:31 LOG4 lstwait: Finished waiting 0.16 seconds late 2010-Oct-09 01:29:31 INFO3 lstwait: Finished waiting 2010-Oct-09 01:29:31 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Oct-09 01:29:31 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF stat_onoff_off {OFF scan}' 2010-Oct-09 01:29:31 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-09 01:29:31 LOG5 begin_task: Level: (2) ID = <10067> Status = 0 0 0 0 ok 2010-Oct-09 01:29:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for OFF scan ...} 2010-Oct-09 01:29:31 INFO2 take_data: Starting WAPP 300-second scan: 28200006 2010-Oct-09 01:29:32 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-09 01:29:32 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-Oct-09 01:29:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-09 01:29:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2010-Oct-09 01:29:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19773.00 2010-Oct-09 01:29:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11369.674439 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-09 01:29:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1369.674439 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:29:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1369.674439 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:29:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1369.674439 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:29:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1369.674439 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:29:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764090 != 85764089 diff = 1)! 2010-Oct-09 01:29:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764090 != 85764089 diff = 1)! 2010-Oct-09 01:29:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764090 != 85764089 diff = 1)! 2010-Oct-09 01:29:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764090 != 85764089 diff = 1)! 2010-Oct-09 01:30:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764048 != 85764047 diff = 1)! 2010-Oct-09 01:30:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764048 != 85764047 diff = 1)! 2010-Oct-09 01:30:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764048 != 85764047 diff = 1)! 2010-Oct-09 01:30:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764048 != 85764047 diff = 1)! 2010-Oct-09 01:30:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764048 != 85764047 diff = 1)! 2010-Oct-09 01:30:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764048 != 85764047 diff = 1)! 2010-Oct-09 01:30:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764048 != 85764047 diff = 1)! 2010-Oct-09 01:30:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764052 != 85764051 diff = 1)! 2010-Oct-09 01:30:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764052 != 85764051 diff = 1)! 2010-Oct-09 01:30:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764052 != 85764051 diff = 1)! 2010-Oct-09 01:30:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764063 != 85764064 diff = 1)! 2010-Oct-09 01:30:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764063 != 85764064 diff = 1)! 2010-Oct-09 01:30:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764063 != 85764064 diff = 1)! 2010-Oct-09 01:30:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764063 != 85764064 diff = 1)! 2010-Oct-09 01:30:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764063 != 85764064 diff = 1)! 2010-Oct-09 01:30:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804171 != 85804172 diff = 1)! 2010-Oct-09 01:30:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804171 != 85804172 diff = 1)! 2010-Oct-09 01:30:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804171 != 85804172 diff = 1)! 2010-Oct-09 01:30:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804171 != 85804172 diff = 1)! 2010-Oct-09 01:30:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804171 != 85804172 diff = 1)! 2010-Oct-09 01:30:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764054 != 85764053 diff = 1)! 2010-Oct-09 01:30:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764094 != 85764093 diff = 1)! 2010-Oct-09 01:30:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764094 != 85764093 diff = 1)! 2010-Oct-09 01:30:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764557 != 85764558 diff = 1)! 2010-Oct-09 01:30:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764557 != 85764558 diff = 1)! 2010-Oct-09 01:31:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764077 != 85764078 diff = 1)! 2010-Oct-09 01:31:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764077 != 85764078 diff = 1)! 2010-Oct-09 01:31:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85764077 != 85764078 diff = 1)! 2010-Oct-09 01:31:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764077 != 85764078 diff = 1)! 2010-Oct-09 01:31:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85764077 != 85764078 diff = 1)! 2010-Oct-09 01:31:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85764077 != 85764078 diff = 1)! 2010-Oct-09 01:31:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85771354 != 85771353 diff = 1)! 2010-Oct-09 01:31:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85771354 != 85771353 diff = 1)! 2010-Oct-09 01:31:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85771354 != 85771353 diff = 1)! 2010-Oct-09 01:31:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85771354 != 85771353 diff = 1)! 2010-Oct-09 01:31:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85771354 != 85771353 diff = 1)! 2010-Oct-09 01:31:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804198 != 85804197 diff = 1)! 2010-Oct-09 01:32:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764083 != 85764084 diff = 1)! 2010-Oct-09 01:32:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764083 != 85764084 diff = 1)! 2010-Oct-09 01:32:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764083 != 85764084 diff = 1)! 2010-Oct-09 01:32:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85764083 != 85764084 diff = 1)! 2010-Oct-09 01:32:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85764083 != 85764084 diff = 1)! 2010-Oct-09 01:32:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804192 != 85804191 diff = 1)! 2010-Oct-09 01:32:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804192 != 85804191 diff = 1)! 2010-Oct-09 01:32:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804192 != 85804191 diff = 1)! 2010-Oct-09 01:32:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804192 != 85804191 diff = 1)! 2010-Oct-09 01:32:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804192 != 85804191 diff = 1)! 2010-Oct-09 01:32:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804192 != 85804191 diff = 1)! 2010-Oct-09 01:32:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804192 != 85804191 diff = 1)! 2010-Oct-09 01:32:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764092 != 85764091 diff = 1)! 2010-Oct-09 01:32:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804210 != 85804209 diff = 1)! 2010-Oct-09 01:33:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804183 != 85804184 diff = 1)! 2010-Oct-09 01:33:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85804183 != 85804184 diff = 1)! 2010-Oct-09 01:33:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764106 != 85764105 diff = 1)! 2010-Oct-09 01:33:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764106 != 85764105 diff = 1)! 2010-Oct-09 01:33:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764106 != 85764105 diff = 1)! 2010-Oct-09 01:33:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764106 != 85764105 diff = 1)! 2010-Oct-09 01:33:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764106 != 85764105 diff = 1)! 2010-Oct-09 01:33:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764106 != 85764105 diff = 1)! 2010-Oct-09 01:33:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764082 != 85764081 diff = 1)! 2010-Oct-09 01:33:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764082 != 85764081 diff = 1)! 2010-Oct-09 01:33:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764082 != 85764081 diff = 1)! 2010-Oct-09 01:33:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764082 != 85764081 diff = 1)! 2010-Oct-09 01:33:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764082 != 85764081 diff = 1)! 2010-Oct-09 01:33:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764082 != 85764081 diff = 1)! 2010-Oct-09 01:33:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764082 != 85764081 diff = 1)! 2010-Oct-09 01:33:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764082 != 85764081 diff = 1)! 2010-Oct-09 01:33:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85785058 != 85785057 diff = 1)! 2010-Oct-09 01:33:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85785058 != 85785057 diff = 1)! 2010-Oct-09 01:33:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85785058 != 85785057 diff = 1)! 2010-Oct-09 01:33:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85785058 != 85785057 diff = 1)! 2010-Oct-09 01:33:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85785058 != 85785057 diff = 1)! 2010-Oct-09 01:33:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85785058 != 85785057 diff = 1)! 2010-Oct-09 01:33:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85785058 != 85785057 diff = 1)! 2010-Oct-09 01:33:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804174 != 85804173 diff = 1)! 2010-Oct-09 01:33:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804174 != 85804173 diff = 1)! 2010-Oct-09 01:33:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804174 != 85804173 diff = 1)! 2010-Oct-09 01:33:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804174 != 85804173 diff = 1)! 2010-Oct-09 01:33:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804174 != 85804173 diff = 1)! 2010-Oct-09 01:33:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804174 != 85804173 diff = 1)! 2010-Oct-09 01:33:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804174 != 85804173 diff = 1)! 2010-Oct-09 01:34:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804193 != 85804194 diff = 1)! 2010-Oct-09 01:34:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804193 != 85804194 diff = 1)! 2010-Oct-09 01:34:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804193 != 85804194 diff = 1)! 2010-Oct-09 01:34:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804193 != 85804194 diff = 1)! 2010-Oct-09 01:34:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85804193 != 85804194 diff = 1)! 2010-Oct-09 01:34:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804193 != 85804194 diff = 1)! 2010-Oct-09 01:34:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-09 01:34:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-09 01:34:33 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-Oct-09 01:34:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-09 01:34:33 LOG5 end_task: Level: (2) ID = <10067> Status = 0 0 0 0 ok 2010-Oct-09 01:34:33 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2010-Oct-09 01:34:33 START begin_task: Starting task 'WAPP calibration' 2010-Oct-09 01:34:33 LOG5 begin_task: Level: (2) ID = <10069> Status = 0 0 0 0 ok 2010-Oct-09 01:34:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Oct-09 01:34:33 START begin_task: Starting task 'selecting calibration type' 2010-Oct-09 01:34:33 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2010-Oct-09 01:34:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-09 01:34:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-09 01:34:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:34:33 START begin_task: Starting task 'waiting on setcal' 2010-Oct-09 01:34:33 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2010-Oct-09 01:34:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-09 01:34:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:34:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:34:33 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 01:34:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-09 01:34:33 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2010-Oct-09 01:34:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-09 01:34:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-09 01:34:33 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2010-Oct-09 01:34:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Oct-09 01:34:33 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Oct-09 01:34:33 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Oct-09 01:34:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-09 01:34:33 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2010-Oct-09 01:34:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:34:33 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-09 01:34:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Oct-09 01:34:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-09 01:34:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-09 01:34:33 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2010-Oct-09 01:34:34 LOG4 take_data: Calling 'take_data 10 10 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Oct-09 01:34:34 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-09 01:34:34 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-Oct-09 01:34:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Oct-09 01:34:34 INFO2 take_data: Starting WAPP 10-second scan: 28200007 2010-Oct-09 01:34:34 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-09 01:34:34 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-Oct-09 01:34:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-09 01:34:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Oct-09 01:34:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20075.00 2010-Oct-09 01:34:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11369.674439 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-09 01:34:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1369.674439 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:34:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1369.674439 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:34:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1369.674439 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:34:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1369.674439 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:34:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-09 01:34:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-09 01:34:45 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-Oct-09 01:34:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-09 01:34:45 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-Oct-09 01:34:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Oct-09 01:34:45 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Oct-09 01:34:45 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Oct-09 01:34:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-09 01:34:45 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-Oct-09 01:34:45 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-09 01:34:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Oct-09 01:34:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-09 01:34:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-09 01:34:45 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-Oct-09 01:34:45 LOG4 take_data: Calling 'take_data 10 10 CAL OFF stat_cal_off {CAL-OFF spectra}' 2010-Oct-09 01:34:45 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-09 01:34:45 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2010-Oct-09 01:34:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2010-Oct-09 01:34:45 INFO2 take_data: Starting WAPP 10-second scan: 28200008 2010-Oct-09 01:34:46 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-09 01:34:46 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2010-Oct-09 01:34:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-09 01:34:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2010-Oct-09 01:34:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20087.00 2010-Oct-09 01:34:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11369.674439 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-09 01:34:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1369.674439 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:34:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1369.674439 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:34:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1369.674439 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:34:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1369.674439 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:34:57 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2010-Oct-09 01:34:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-09 01:34:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (857841611 != 857841610 diff = 1)! 2010-Oct-09 01:34:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (857841611 != 857841609 diff = 2)! 2010-Oct-09 01:34:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (857841611 != 857841610 diff = 1)! 2010-Oct-09 01:34:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-09 01:34:57 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2010-Oct-09 01:34:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-09 01:34:57 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2010-Oct-09 01:34:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-09 01:34:57 STOP finish_task: Finishing task 'WAPP calibration' 2010-Oct-09 01:34:57 LOG5 finish_task: Level: (2) ID = <10069> Status = 0 0 0 0 ok 2010-Oct-09 01:34:57 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Oct-09 01:34:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:34:57 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Oct-09 01:34:57 LOG5 end_task: Level: (2) ID = <10069> Status = 0 0 0 0 ok 2010-Oct-09 01:34:57 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-09 01:34:57 LOG5 begin_task: Level: (2) ID = <10078> Status = 0 0 0 0 ok 2010-Oct-09 01:34:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-09 01:34:57 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-09 01:34:57 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023539+244704" 2010-Oct-09 01:34:57 LOG3 vw_send: To DATATAKING: pnt tr 23539.240000 244704.130000 -CJ 2010-Oct-09 01:34:57 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-09 01:34:57 LOG5 finish_task: Level: (2) ID = <10078> Status = 0 0 0 0 ok 2010-Oct-09 01:34:57 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-09 01:34:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:34:57 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-09 01:34:57 LOG5 end_task: Level: (2) ID = <10078> Status = 0 0 0 0 ok 2010-Oct-09 01:34:57 STOP finish_task: Finishing task 'standard on/off' 2010-Oct-09 01:34:57 LOG5 finish_task: Level: (1) ID = <10048> Status = 0 0 0 0 ok 2010-Oct-09 01:34:57 DONE finish_task: DONE finished pattern: standard on/off 2010-Oct-09 01:34:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-09 01:34:58 END end_task: Finishing task 'standard on/off' with status 'OK' 2010-Oct-09 01:34:58 LOG5 end_task: Level: (1) ID = <10048> Status = 0 0 0 0 ok 2010-Oct-09 01:34:58 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023539+244704" 2010-Oct-09 01:34:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (857841611 != 857841610 diff = 1)! 2010-Oct-09 01:34:58 LOG4 got_cormsg: From DATATAKING: pnt tr 23539.240000 244704.130000 -CJ 2010-Oct-09 01:34:58 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-09 01:35:07 COMMAND CIMA-send_to_exec: Sending command to point to a source 2010-Oct-09 01:35:07 LOG4 exec_msg: From OBSERVER: track_new_source j023610+254524 023609.78 254523.94 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 10969 Topocentric velocity(optical) 0 0 0.0 0.0 0 2010-Oct-09 01:35:07 LOG1 track_new_source: Calling 'track_new_source j023610+254524 023609.78 254523.94 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 10969 Topocentric velocity(optical) 0 0 0.0 0.0 0' 2010-Oct-09 01:35:07 BEGIN begin_task: Starting task 'selecting new source' 2010-Oct-09 01:35:07 LOG5 begin_task: Level: (1) ID = <10079> Status = 0 0 0 0 ok 2010-Oct-09 01:35:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {j023610+254524} INFO {Selecting source 'j023610+254524' ...} 2010-Oct-09 01:35:07 LOG3 track_source: Calling 'track_source j023610+254524 023609.78 254523.94 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 10969 Topocentric velocity(optical)' 2010-Oct-09 01:35:07 START begin_task: Starting task 'sending tracking commands' 2010-Oct-09 01:35:07 LOG5 begin_task: Level: (2) ID = <10080> Status = 0 0 0 0 ok 2010-Oct-09 01:35:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {j023610+254524} INFO {Slewing to source 'j023610+254524' ...} 2010-Oct-09 01:35:07 INFO1 track_source: Starting to track j023610+254524 2010-Oct-09 01:35:07 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023610+254524" 2010-Oct-09 01:35:07 LOG3 vw_send: To DATATAKING: set ra 023609.78 2010-Oct-09 01:35:07 LOG3 vw_send: To DATATAKING: set dec 254523.94 2010-Oct-09 01:35:07 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Oct-09 01:35:07 LOG3 vw_send: To DATATAKING: pnt tr 023609.78 254523.94 -CJ 2010-Oct-09 01:35:07 LOG3 vw_send: To DATATAKING: dopsetvel 10969 topo 2010-Oct-09 01:35:07 STOP finish_task: Finishing task 'sending tracking commands' 2010-Oct-09 01:35:07 LOG5 finish_task: Level: (2) ID = <10080> Status = 0 0 0 0 ok 2010-Oct-09 01:35:07 INFO2 finish_task: DONE finished sending: tracking commands 2010-Oct-09 01:35:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:35:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Oct-09 01:35:08 LOG5 end_task: Level: (2) ID = <10080> Status = 0 0 0 0 ok 2010-Oct-09 01:35:08 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2010-Oct-09 01:35:08 START begin_task: Starting task 'applying pointing corrections' 2010-Oct-09 01:35:08 LOG5 begin_task: Level: (2) ID = <10081> Status = 0 0 0 0 ok 2010-Oct-09 01:35:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2010-Oct-09 01:35:08 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-09 01:35:08 STOP finish_task: Finishing task 'applying pointing corrections' 2010-Oct-09 01:35:08 LOG5 finish_task: Level: (2) ID = <10081> Status = 0 0 0 0 ok 2010-Oct-09 01:35:08 INFO2 finish_task: DONE finished applying: pointing corrections 2010-Oct-09 01:35:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:35:08 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2010-Oct-09 01:35:08 LOG5 end_task: Level: (2) ID = <10081> Status = 0 0 0 0 ok 2010-Oct-09 01:35:08 STOP finish_task: Finishing task 'selecting new source' 2010-Oct-09 01:35:08 LOG5 finish_task: Level: (1) ID = <10079> Status = 0 0 0 0 ok 2010-Oct-09 01:35:08 DONE finish_task: DONE finished selecting: new source 2010-Oct-09 01:35:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-09 01:35:08 END end_task: Finishing task 'selecting new source' with status 'OK' 2010-Oct-09 01:35:08 LOG5 end_task: Level: (1) ID = <10079> Status = 0 0 0 0 ok 2010-Oct-09 01:35:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023610+254524" 2010-Oct-09 01:35:08 LOG4 got_cormsg: From DATATAKING: set ra 023609.78 2010-Oct-09 01:35:08 LOG4 got_cormsg: From DATATAKING: set dec 254523.94 2010-Oct-09 01:35:08 LOG4 got_cormsg: From DATATAKING: vw% 023609.78 2010-Oct-09 01:35:08 LOG4 got_cormsg: From DATATAKING: vw% 254523.94 2010-Oct-09 01:35:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:35:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Oct-09 01:35:08 LOG4 got_cormsg: From DATATAKING: pnt tr 023609.78 254523.94 -CJ 2010-Oct-09 01:35:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 10969 topo 2010-Oct-09 01:35:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-09 01:35:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:35:08 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-09 01:35:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:35:10 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2010-Oct-09 01:35:10 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 off lcorcal each first one 2010-Oct-09 01:35:10 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 off lcorcal each first one' 2010-Oct-09 01:35:10 BEGIN begin_task: Starting task 'standard on/off' 2010-Oct-09 01:35:10 LOG5 begin_task: Level: (1) ID = <10082> Status = 0 0 0 0 ok 2010-Oct-09 01:35:10 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'j023610+254524' 2010-Oct-09 01:35:10 INFO1 onoff_wapp: Starting pattern: Standard on/off 2010-Oct-09 01:35:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2010-Oct-09 01:35:10 START begin_task: Starting task 'waiting on telescope' 2010-Oct-09 01:35:10 LOG5 begin_task: Level: (2) ID = <10083> Status = 0 0 0 0 ok 2010-Oct-09 01:35:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-09 01:35:10 LOG3 waittrk: Start waittrk 5 2010-Oct-09 01:35:10 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-09 01:35:10 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2010-Oct-09 01:35:15 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-09 01:35:15 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2010-Oct-09 01:35:15 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-09 01:35:15 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2010-Oct-09 01:35:38 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-09 01:35:38 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2010-Oct-09 01:35:38 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-09 01:35:38 INFO2 waittrk: Now tracking j023610+254524 2010-Oct-09 01:35:38 LOG4 waittrk: Current telescope position: Az = 207.08 ZA = 8.45 2010-Oct-09 01:35:38 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-09 01:35:38 LOG5 finish_task: Level: (2) ID = <10083> Status = 0 0 0 0 ok 2010-Oct-09 01:35:38 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-09 01:35:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:35:39 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-09 01:35:39 LOG5 end_task: Level: (2) ID = <10083> Status = 0 0 0 0 ok 2010-Oct-09 01:35:39 START begin_task: Starting task 'selecting calibration type' 2010-Oct-09 01:35:39 LOG5 begin_task: Level: (2) ID = <10086> Status = 0 0 0 0 ok 2010-Oct-09 01:35:39 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-09 01:35:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-09 01:35:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:35:39 START begin_task: Starting task 'waiting on setcal' 2010-Oct-09 01:35:39 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2010-Oct-09 01:35:39 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-09 01:35:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:35:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:35:39 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 01:35:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-09 01:35:39 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2010-Oct-09 01:35:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-09 01:35:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-09 01:35:39 LOG5 end_task: Level: (2) ID = <10086> Status = 0 0 0 0 ok 2010-Oct-09 01:35:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2010-Oct-09 01:35:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2010-Oct-09 01:35:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2010-Oct-09 01:35:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2010-Oct-09 01:35:39 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2010-Oct-09 01:35:39 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2010-Oct-09 01:35:39 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-09 01:35:39 LOG5 begin_task: Level: (2) ID = <10088> Status = 0 0 0 0 ok 2010-Oct-09 01:35:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-09 01:35:39 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-09 01:35:39 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023610+254524" 2010-Oct-09 01:35:39 LOG3 vw_send: To DATATAKING: pnt tr 23609.780000 254523.940000 -CJ 2010-Oct-09 01:35:39 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-09 01:35:39 LOG5 finish_task: Level: (2) ID = <10088> Status = 0 0 0 0 ok 2010-Oct-09 01:35:39 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-09 01:35:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:35:39 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-09 01:35:39 LOG5 end_task: Level: (2) ID = <10088> Status = 0 0 0 0 ok 2010-Oct-09 01:35:39 START begin_task: Starting task 'waiting on telescope' 2010-Oct-09 01:35:39 LOG5 begin_task: Level: (2) ID = <10089> Status = 0 0 0 0 ok 2010-Oct-09 01:35:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-09 01:35:39 LOG3 waittrk: Start waittrk 5 2010-Oct-09 01:35:39 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-09 01:35:39 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-Oct-09 01:35:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2010-Oct-09 01:35:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:35:39 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023610+254524" 2010-Oct-09 01:35:39 LOG4 got_cormsg: From DATATAKING: pnt tr 23609.780000 254523.940000 -CJ 2010-Oct-09 01:35:39 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-09 01:35:40 NOTE WAPPDATA-new_file: New FITS file: wapp.20101009.a2048.0002.fits 2010-Oct-09 01:35:40 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20101009.a2048.0002.fits} 2010-Oct-09 01:35:44 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-09 01:35:44 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-Oct-09 01:35:44 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-09 01:35:44 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2010-Oct-09 01:35:46 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-09 01:35:46 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2010-Oct-09 01:35:46 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-09 01:35:46 INFO2 waittrk: Now tracking j023610+254524 2010-Oct-09 01:35:46 LOG4 waittrk: Current telescope position: Az = 206.90 ZA = 8.44 2010-Oct-09 01:35:46 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-09 01:35:46 LOG5 finish_task: Level: (2) ID = <10089> Status = 0 0 0 0 ok 2010-Oct-09 01:35:46 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-09 01:35:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:35:47 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-09 01:35:47 LOG5 end_task: Level: (2) ID = <10089> Status = 0 0 0 0 ok 2010-Oct-09 01:35:47 LOG5 antvel: Calling 'antvel 23609.780000 254523.940000 J Topocentric 0' 2010-Oct-09 01:35:47 LOG2 antvel: Precessing RA = 02:36:09.8 Dec = +25:45:23.9 Epoch = 2010.77226 J 2010-Oct-09 01:35:47 LOG2 antvel: Computed apparent RA = 02:36:49.7 Dec = +25:48:21.6 2010-Oct-09 01:35:47 LOG2 antvel: Parameters to Doppler: Topocentric 20146 2010 282 0.0 2010-Oct-09 01:35:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Oct-09 01:35:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=10969.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-Oct-09 01:35:47 INFO4 dopset_gen: New sky frequencies: 1370.269449 1370.269449 1370.269449 1370.269449 1370.269449 1370.269449 1370.269449 1370.269449 1370.269449 2010-Oct-09 01:35:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1370.269449 sky0=1370.269449 sky1=1370.269449 sky2=1370.269449 sky3=1370.269449 sky4=1370.269449 sky5=1370.269449 sky6=1370.269449 sky7=1370.269449 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2010-Oct-09 01:35:47 LOG2 dopset_gen: Result from 'sky2syn': 11370.269449 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2010-Oct-09 01:35:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11370269449.0} 2010-Oct-09 01:35:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-09 01:35:47 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-09 01:35:47 LOG5 begin_task: Level: (2) ID = <10092> Status = 0 0 0 0 ok 2010-Oct-09 01:35:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Oct-09 01:35:47 INFO2 adjust_power: Starting to adjust WAPP power 2010-Oct-09 01:35:47 LOG3 vw_send: To DATATAKING: adjpwrif1 2010-Oct-09 01:35:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2010-Oct-09 01:35:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:35:47 START begin_task: Starting task 'waiting on adjpwrif1' 2010-Oct-09 01:35:47 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2010-Oct-09 01:35:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11370269449.0} 2010-Oct-09 01:35:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-09 01:35:47 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2010-Oct-09 01:35:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:35:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:35:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:35:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:35:47 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 01:35:47 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2010-Oct-09 01:35:47 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2010-Oct-09 01:35:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2010-Oct-09 01:35:47 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Oct-09 01:35:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Oct-09 01:35:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:35:47 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Oct-09 01:35:47 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-Oct-09 01:35:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:35:47 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Oct-09 01:35:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:35:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:35:50 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 01:35:50 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Oct-09 01:35:50 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-Oct-09 01:35:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Oct-09 01:35:50 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-09 01:35:50 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2010-Oct-09 01:35:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Oct-09 01:35:50 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2010-Oct-09 01:35:50 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2010-Oct-09 01:35:50 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2010-Oct-09 01:35:50 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2010-Oct-09 01:35:50 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Oct-09 01:35:50 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2010-Oct-09 01:35:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:35:50 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 13 8 dB 2010-Oct-09 01:35:50 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2010-Oct-09 01:35:50 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2010-Oct-09 01:35:50 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2010-Oct-09 01:35:50 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2010-Oct-09 01:35:50 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 15 0 dB 2010-Oct-09 01:35:51 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 2 12 dB 2010-Oct-09 01:35:51 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 3 15 dB 2010-Oct-09 01:35:51 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Oct-09 01:35:51 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Oct-09 01:35:51 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2010-Oct-09 01:35:51 INFO2 wapp_adjpwr: WAPP power: 0.976 1.039 1.120 1.148 2010-Oct-09 01:35:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-09 01:35:51 LOG5 finish_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2010-Oct-09 01:35:51 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Oct-09 01:35:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:35:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-09 01:35:51 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2010-Oct-09 01:35:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-09 01:35:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-09 01:35:51 LOG5 finish_task: Level: (2) ID = <10092> Status = 0 0 0 0 ok 2010-Oct-09 01:35:51 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Oct-09 01:35:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:35:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-09 01:35:51 LOG5 end_task: Level: (2) ID = <10092> Status = 0 0 0 0 ok 2010-Oct-09 01:35:51 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON stat_onoff_on {ON scan}' 2010-Oct-09 01:35:51 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-09 01:35:51 LOG5 begin_task: Level: (2) ID = <10097> Status = 0 0 0 0 ok 2010-Oct-09 01:35:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for ON scan ...} 2010-Oct-09 01:35:51 INFO2 take_data: Starting WAPP 300-second scan: 28200009 2010-Oct-09 01:35:51 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-09 01:35:51 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-Oct-09 01:35:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-09 01:35:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20152.00 2010-Oct-09 01:35:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2010-Oct-09 01:35:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11370.269449 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-09 01:35:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1370.269449 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:35:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1370.269449 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:35:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1370.269449 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:35:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1370.269449 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:36:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804201 != 85804202 diff = 1)! 2010-Oct-09 01:36:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804201 != 85804202 diff = 1)! 2010-Oct-09 01:36:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804201 != 85804202 diff = 1)! 2010-Oct-09 01:36:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804201 != 85804202 diff = 1)! 2010-Oct-09 01:36:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85779700 != 85779699 diff = 1)! 2010-Oct-09 01:36:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85779700 != 85779699 diff = 1)! 2010-Oct-09 01:36:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85779700 != 85779699 diff = 1)! 2010-Oct-09 01:36:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85779700 != 85779699 diff = 1)! 2010-Oct-09 01:36:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85791072 != 85791071 diff = 1)! 2010-Oct-09 01:36:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85791072 != 85791071 diff = 1)! 2010-Oct-09 01:36:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85791072 != 85791071 diff = 1)! 2010-Oct-09 01:36:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85791072 != 85791071 diff = 1)! 2010-Oct-09 01:36:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85791072 != 85791071 diff = 1)! 2010-Oct-09 01:36:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804180 != 85804179 diff = 1)! 2010-Oct-09 01:36:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804180 != 85804179 diff = 1)! 2010-Oct-09 01:36:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804180 != 85804179 diff = 1)! 2010-Oct-09 01:36:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804180 != 85804179 diff = 1)! 2010-Oct-09 01:36:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804180 != 85804179 diff = 1)! 2010-Oct-09 01:36:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804180 != 85804179 diff = 1)! 2010-Oct-09 01:37:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85765322 != 85765321 diff = 1)! 2010-Oct-09 01:37:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85765322 != 85765321 diff = 1)! 2010-Oct-09 01:37:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85765322 != 85765321 diff = 1)! 2010-Oct-09 01:37:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85765322 != 85765321 diff = 1)! 2010-Oct-09 01:37:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85765322 != 85765321 diff = 1)! 2010-Oct-09 01:37:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764101 != 85764102 diff = 1)! 2010-Oct-09 01:37:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85774040 != 85774039 diff = 1)! 2010-Oct-09 01:37:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85774040 != 85774039 diff = 1)! 2010-Oct-09 01:37:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85774040 != 85774039 diff = 1)! 2010-Oct-09 01:37:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85774040 != 85774039 diff = 1)! 2010-Oct-09 01:37:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85774040 != 85774039 diff = 1)! 2010-Oct-09 01:37:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85774040 != 85774039 diff = 1)! 2010-Oct-09 01:37:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85774040 != 85774039 diff = 1)! 2010-Oct-09 01:38:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804179 != 85804180 diff = 1)! 2010-Oct-09 01:38:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804179 != 85804180 diff = 1)! 2010-Oct-09 01:38:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804179 != 85804180 diff = 1)! 2010-Oct-09 01:38:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804179 != 85804180 diff = 1)! 2010-Oct-09 01:38:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804200 != 85804199 diff = 1)! 2010-Oct-09 01:38:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804200 != 85804199 diff = 1)! 2010-Oct-09 01:38:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804200 != 85804199 diff = 1)! 2010-Oct-09 01:38:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804200 != 85804199 diff = 1)! 2010-Oct-09 01:38:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804200 != 85804199 diff = 1)! 2010-Oct-09 01:39:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85787488 != 85787487 diff = 1)! 2010-Oct-09 01:39:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804165 != 85804166 diff = 1)! 2010-Oct-09 01:39:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804165 != 85804166 diff = 1)! 2010-Oct-09 01:39:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804165 != 85804166 diff = 1)! 2010-Oct-09 01:39:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804165 != 85804166 diff = 1)! 2010-Oct-09 01:39:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804165 != 85804166 diff = 1)! 2010-Oct-09 01:40:06 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 01:40:06.300 (seconds: 6006.300)!} 2010-Oct-09 01:40:06 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 01:40:06.300 (seconds: 6006.300)! 2010-Oct-09 01:40:07 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 6005.0 to 6006.0! 2010-Oct-09 01:40:08 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (6005.0 - 6007.0)! 2010-Oct-09 01:40:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804184 != 85804183 diff = 1)! 2010-Oct-09 01:40:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85783794 != 85783793 diff = 1)! 2010-Oct-09 01:40:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85783794 != 85783793 diff = 1)! 2010-Oct-09 01:40:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85783794 != 85783793 diff = 1)! 2010-Oct-09 01:40:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85783794 != 85783793 diff = 1)! 2010-Oct-09 01:40:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85783794 != 85783793 diff = 1)! 2010-Oct-09 01:40:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85783794 != 85783793 diff = 1)! 2010-Oct-09 01:40:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85783794 != 85783793 diff = 1)! 2010-Oct-09 01:40:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85783794 != 85783793 diff = 1)! 2010-Oct-09 01:40:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85783794 != 85783793 diff = 1)! 2010-Oct-09 01:40:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85784470 != 85784469 diff = 1)! 2010-Oct-09 01:40:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85775422 != 85775421 diff = 1)! 2010-Oct-09 01:40:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85775422 != 85775421 diff = 1)! 2010-Oct-09 01:40:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85775422 != 85775421 diff = 1)! 2010-Oct-09 01:40:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85775422 != 85775421 diff = 1)! 2010-Oct-09 01:40:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85775422 != 85775421 diff = 1)! 2010-Oct-09 01:40:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85775422 != 85775421 diff = 1)! 2010-Oct-09 01:40:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804190 != 85804189 diff = 1)! 2010-Oct-09 01:40:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804190 != 85804189 diff = 1)! 2010-Oct-09 01:40:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804190 != 85804189 diff = 1)! 2010-Oct-09 01:40:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804190 != 85804189 diff = 1)! 2010-Oct-09 01:40:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804190 != 85804189 diff = 1)! 2010-Oct-09 01:40:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804190 != 85804189 diff = 1)! 2010-Oct-09 01:40:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804190 != 85804189 diff = 1)! 2010-Oct-09 01:40:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804174 != 85804173 diff = 1)! 2010-Oct-09 01:40:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804174 != 85804173 diff = 1)! 2010-Oct-09 01:40:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764072 != 85764071 diff = 1)! 2010-Oct-09 01:40:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764072 != 85764071 diff = 1)! 2010-Oct-09 01:40:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764072 != 85764071 diff = 1)! 2010-Oct-09 01:40:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764072 != 85764071 diff = 1)! 2010-Oct-09 01:40:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764072 != 85764071 diff = 1)! 2010-Oct-09 01:40:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764072 != 85764071 diff = 1)! 2010-Oct-09 01:40:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764072 != 85764071 diff = 1)! 2010-Oct-09 01:40:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804163 != 85804162 diff = 1)! 2010-Oct-09 01:40:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804163 != 85804162 diff = 1)! 2010-Oct-09 01:40:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804163 != 85804162 diff = 1)! 2010-Oct-09 01:40:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804163 != 85804162 diff = 1)! 2010-Oct-09 01:40:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804163 != 85804162 diff = 1)! 2010-Oct-09 01:40:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804163 != 85804162 diff = 1)! 2010-Oct-09 01:40:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-09 01:40:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-09 01:40:52 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-Oct-09 01:40:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-09 01:40:52 LOG5 end_task: Level: (2) ID = <10097> Status = 0 0 0 0 ok 2010-Oct-09 01:40:52 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2010-Oct-09 01:40:52 LOG2 onoff_wapp: Parameters: RA-offset: -90.707100000000253 arcminutes wait: 60 secs 2010-Oct-09 01:40:52 LOG4 track_offsets: Calling 'track_offsets -90.707100000000253 0.0 main small' 2010-Oct-09 01:40:52 START begin_task: Starting task 'sending telescope offsets' 2010-Oct-09 01:40:52 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2010-Oct-09 01:40:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2010-Oct-09 01:40:52 INFO2 track_offsets: Starting to send new offsets 2010-Oct-09 01:40:52 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023610+254524" 2010-Oct-09 01:40:52 LOG3 vw_send: To DATATAKING: pnt tr 23609.780000 254523.940000 -CJ -o -UD -1.51179 0.0 -CH 2010-Oct-09 01:40:52 STOP finish_task: Finishing task 'sending telescope offsets' 2010-Oct-09 01:40:52 LOG5 finish_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2010-Oct-09 01:40:52 INFO2 finish_task: DONE finished sending: telescope offsets 2010-Oct-09 01:40:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:40:52 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2010-Oct-09 01:40:52 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2010-Oct-09 01:40:52 INFO2 lstwait: Waiting for 59.8 secs from LST 02:24:48 to LST 02:25:48 ... 2010-Oct-09 01:40:52 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836175999999789 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Oct-09 01:40:52 START begin_task: Starting task 'waiting on wait on LST' 2010-Oct-09 01:40:52 LOG5 begin_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2010-Oct-09 01:40:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85789335 != 85789336 diff = 1)! 2010-Oct-09 01:40:52 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023610+254524" 2010-Oct-09 01:40:52 LOG4 got_cormsg: From DATATAKING: pnt tr 23609.780000 254523.940000 -CJ -o -UD -1.51179 0.0 -CH 2010-Oct-09 01:40:52 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-09 01:41:25 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'j023610+254524' (after 33 seconds) 2010-Oct-09 01:41:25 LOG3 wait_and_tell_when_on_source: The telescope arrived at source with 27 seconds to spare (33 < 60 seconds) 2010-Oct-09 01:41:52 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-Oct-09 01:41:52 LOG5 end_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2010-Oct-09 01:41:52 LOG4 lstwait: Finished waiting 0.16 seconds late 2010-Oct-09 01:41:52 INFO3 lstwait: Finished waiting 2010-Oct-09 01:41:52 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Oct-09 01:41:52 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF stat_onoff_off {OFF scan}' 2010-Oct-09 01:41:52 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-09 01:41:52 LOG5 begin_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2010-Oct-09 01:41:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for OFF scan ...} 2010-Oct-09 01:41:52 INFO2 take_data: Starting WAPP 300-second scan: 28200010 2010-Oct-09 01:41:53 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-09 01:41:53 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2010-Oct-09 01:41:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-09 01:41:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2010-Oct-09 01:41:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20514.00 2010-Oct-09 01:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11370.269449 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-09 01:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1370.269449 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1370.269449 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1370.269449 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:41:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1370.269449 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:41:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804170 != 85804169 diff = 1)! 2010-Oct-09 01:41:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804170 != 85804169 diff = 1)! 2010-Oct-09 01:41:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804170 != 85804169 diff = 1)! 2010-Oct-09 01:41:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804170 != 85804169 diff = 1)! 2010-Oct-09 01:41:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804170 != 85804169 diff = 1)! 2010-Oct-09 01:41:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804170 != 85804169 diff = 1)! 2010-Oct-09 01:41:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804170 != 85804169 diff = 1)! 2010-Oct-09 01:41:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804170 != 85804169 diff = 1)! 2010-Oct-09 01:42:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804193 != 85804194 diff = 1)! 2010-Oct-09 01:42:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804193 != 85804194 diff = 1)! 2010-Oct-09 01:42:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804193 != 85804194 diff = 1)! 2010-Oct-09 01:42:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85804193 != 85804194 diff = 1)! 2010-Oct-09 01:42:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804193 != 85804194 diff = 1)! 2010-Oct-09 01:42:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85804193 != 85804194 diff = 1)! 2010-Oct-09 01:42:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85804193 != 85804194 diff = 1)! 2010-Oct-09 01:42:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804180 != 85804179 diff = 1)! 2010-Oct-09 01:42:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804180 != 85804179 diff = 1)! 2010-Oct-09 01:42:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804157 != 85804158 diff = 1)! 2010-Oct-09 01:42:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804157 != 85804158 diff = 1)! 2010-Oct-09 01:42:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804157 != 85804158 diff = 1)! 2010-Oct-09 01:42:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804196 != 85804195 diff = 1)! 2010-Oct-09 01:43:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764084 != 85764083 diff = 1)! 2010-Oct-09 01:43:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764084 != 85764083 diff = 1)! 2010-Oct-09 01:43:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764084 != 85764083 diff = 1)! 2010-Oct-09 01:43:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764084 != 85764083 diff = 1)! 2010-Oct-09 01:43:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85765176 != 85765175 diff = 1)! 2010-Oct-09 01:43:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85789358 != 85789357 diff = 1)! 2010-Oct-09 01:43:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85789358 != 85789357 diff = 1)! 2010-Oct-09 01:43:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85789358 != 85789357 diff = 1)! 2010-Oct-09 01:43:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85789358 != 85789357 diff = 1)! 2010-Oct-09 01:43:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764081 != 85764082 diff = 1)! 2010-Oct-09 01:43:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764081 != 85764082 diff = 1)! 2010-Oct-09 01:43:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764073 != 85764074 diff = 1)! 2010-Oct-09 01:43:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764073 != 85764074 diff = 1)! 2010-Oct-09 01:43:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764073 != 85764074 diff = 1)! 2010-Oct-09 01:43:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764073 != 85764074 diff = 1)! 2010-Oct-09 01:44:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804202 != 85804201 diff = 1)! 2010-Oct-09 01:44:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804202 != 85804201 diff = 1)! 2010-Oct-09 01:44:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804202 != 85804201 diff = 1)! 2010-Oct-09 01:44:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804202 != 85804201 diff = 1)! 2010-Oct-09 01:44:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804202 != 85804201 diff = 1)! 2010-Oct-09 01:44:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804202 != 85804201 diff = 1)! 2010-Oct-09 01:44:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764082 != 85764081 diff = 1)! 2010-Oct-09 01:44:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764082 != 85764081 diff = 1)! 2010-Oct-09 01:44:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764082 != 85764081 diff = 1)! 2010-Oct-09 01:44:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764082 != 85764081 diff = 1)! 2010-Oct-09 01:44:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764082 != 85764081 diff = 1)! 2010-Oct-09 01:44:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764082 != 85764081 diff = 1)! 2010-Oct-09 01:44:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764074 != 85764073 diff = 1)! 2010-Oct-09 01:45:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764066 != 85764065 diff = 1)! 2010-Oct-09 01:45:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764066 != 85764065 diff = 1)! 2010-Oct-09 01:45:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764066 != 85764065 diff = 1)! 2010-Oct-09 01:45:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764066 != 85764065 diff = 1)! 2010-Oct-09 01:45:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804183 != 85804184 diff = 1)! 2010-Oct-09 01:45:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804183 != 85804184 diff = 1)! 2010-Oct-09 01:45:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804183 != 85804184 diff = 1)! 2010-Oct-09 01:45:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85804183 != 85804184 diff = 1)! 2010-Oct-09 01:45:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804183 != 85804184 diff = 1)! 2010-Oct-09 01:45:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85804183 != 85804184 diff = 1)! 2010-Oct-09 01:45:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85804183 != 85804184 diff = 1)! 2010-Oct-09 01:45:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804183 != 85804184 diff = 1)! 2010-Oct-09 01:45:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85775652 != 85775651 diff = 1)! 2010-Oct-09 01:45:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85775652 != 85775651 diff = 1)! 2010-Oct-09 01:45:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85775652 != 85775651 diff = 1)! 2010-Oct-09 01:45:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85775652 != 85775651 diff = 1)! 2010-Oct-09 01:45:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85775652 != 85775651 diff = 1)! 2010-Oct-09 01:45:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85775652 != 85775651 diff = 1)! 2010-Oct-09 01:45:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85775652 != 85775651 diff = 1)! 2010-Oct-09 01:45:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764077 != 85764078 diff = 1)! 2010-Oct-09 01:45:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764077 != 85764078 diff = 1)! 2010-Oct-09 01:46:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85788788 != 85788787 diff = 1)! 2010-Oct-09 01:46:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85788788 != 85788787 diff = 1)! 2010-Oct-09 01:46:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764055 != 85764054 diff = 1)! 2010-Oct-09 01:46:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804172 != 85804171 diff = 1)! 2010-Oct-09 01:46:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764083 != 85764084 diff = 1)! 2010-Oct-09 01:46:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-09 01:46:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-09 01:46:54 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2010-Oct-09 01:46:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-09 01:46:54 LOG5 end_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2010-Oct-09 01:46:54 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2010-Oct-09 01:46:54 START begin_task: Starting task 'WAPP calibration' 2010-Oct-09 01:46:54 LOG5 begin_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2010-Oct-09 01:46:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Oct-09 01:46:54 START begin_task: Starting task 'selecting calibration type' 2010-Oct-09 01:46:54 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2010-Oct-09 01:46:54 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-09 01:46:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-09 01:46:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:46:54 START begin_task: Starting task 'waiting on setcal' 2010-Oct-09 01:46:54 LOG5 begin_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2010-Oct-09 01:46:54 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-09 01:46:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:46:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:46:54 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 01:46:54 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-09 01:46:54 LOG5 end_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2010-Oct-09 01:46:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-09 01:46:54 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-09 01:46:54 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2010-Oct-09 01:46:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Oct-09 01:46:54 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Oct-09 01:46:54 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Oct-09 01:46:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-09 01:46:54 LOG5 begin_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2010-Oct-09 01:46:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:46:54 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-09 01:46:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Oct-09 01:46:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-09 01:46:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-09 01:46:54 LOG5 end_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2010-Oct-09 01:46:54 LOG4 take_data: Calling 'take_data 10 10 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Oct-09 01:46:54 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-09 01:46:54 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2010-Oct-09 01:46:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Oct-09 01:46:55 INFO2 take_data: Starting WAPP 10-second scan: 28200011 2010-Oct-09 01:46:55 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-09 01:46:55 LOG5 begin_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2010-Oct-09 01:46:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-09 01:46:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Oct-09 01:46:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20816.00 2010-Oct-09 01:47:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11370.269449 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-09 01:47:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1370.269449 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:47:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1370.269449 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:47:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1370.269449 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:47:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1370.269449 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:47:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-09 01:47:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-09 01:47:06 LOG5 end_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2010-Oct-09 01:47:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-09 01:47:06 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2010-Oct-09 01:47:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Oct-09 01:47:06 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Oct-09 01:47:06 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Oct-09 01:47:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-09 01:47:06 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2010-Oct-09 01:47:06 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-09 01:47:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Oct-09 01:47:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-09 01:47:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-09 01:47:06 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2010-Oct-09 01:47:06 LOG4 take_data: Calling 'take_data 10 10 CAL OFF stat_cal_off {CAL-OFF spectra}' 2010-Oct-09 01:47:06 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-09 01:47:06 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2010-Oct-09 01:47:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2010-Oct-09 01:47:06 INFO2 take_data: Starting WAPP 10-second scan: 28200012 2010-Oct-09 01:47:07 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-09 01:47:07 LOG5 begin_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2010-Oct-09 01:47:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-09 01:47:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2010-Oct-09 01:47:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20828.00 2010-Oct-09 01:47:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11370.269449 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-09 01:47:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1370.269449 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:47:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1370.269449 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:47:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1370.269449 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:47:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1370.269449 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:47:18 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2010-Oct-09 01:47:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-09 01:47:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-09 01:47:18 LOG5 end_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2010-Oct-09 01:47:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-09 01:47:18 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2010-Oct-09 01:47:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-09 01:47:18 STOP finish_task: Finishing task 'WAPP calibration' 2010-Oct-09 01:47:18 LOG5 finish_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2010-Oct-09 01:47:18 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Oct-09 01:47:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:47:18 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Oct-09 01:47:18 LOG5 end_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2010-Oct-09 01:47:18 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-09 01:47:18 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2010-Oct-09 01:47:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-09 01:47:18 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-09 01:47:18 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023610+254524" 2010-Oct-09 01:47:18 LOG3 vw_send: To DATATAKING: pnt tr 23609.780000 254523.940000 -CJ 2010-Oct-09 01:47:18 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-09 01:47:18 LOG5 finish_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2010-Oct-09 01:47:18 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-09 01:47:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:47:18 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-09 01:47:18 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2010-Oct-09 01:47:18 STOP finish_task: Finishing task 'standard on/off' 2010-Oct-09 01:47:18 LOG5 finish_task: Level: (1) ID = <10082> Status = 0 0 0 0 ok 2010-Oct-09 01:47:18 DONE finish_task: DONE finished pattern: standard on/off 2010-Oct-09 01:47:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-09 01:47:19 END end_task: Finishing task 'standard on/off' with status 'OK' 2010-Oct-09 01:47:19 LOG5 end_task: Level: (1) ID = <10082> Status = 0 0 0 0 ok 2010-Oct-09 01:47:19 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023610+254524" 2010-Oct-09 01:47:19 LOG4 got_cormsg: From DATATAKING: pnt tr 23609.780000 254523.940000 -CJ 2010-Oct-09 01:47:19 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-09 01:47:23 COMMAND CIMA-send_to_exec: Sending command to point to a source 2010-Oct-09 01:47:23 LOG4 exec_msg: From OBSERVER: track_new_source j024113+262733 024113.47 262733.48 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 10098 Topocentric velocity(optical) 0 0 0.0 0.0 0 2010-Oct-09 01:47:23 LOG1 track_new_source: Calling 'track_new_source j024113+262733 024113.47 262733.48 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 10098 Topocentric velocity(optical) 0 0 0.0 0.0 0' 2010-Oct-09 01:47:23 BEGIN begin_task: Starting task 'selecting new source' 2010-Oct-09 01:47:23 LOG5 begin_task: Level: (1) ID = <10113> Status = 0 0 0 0 ok 2010-Oct-09 01:47:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {j024113+262733} INFO {Selecting source 'j024113+262733' ...} 2010-Oct-09 01:47:23 LOG3 track_source: Calling 'track_source j024113+262733 024113.47 262733.48 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 10098 Topocentric velocity(optical)' 2010-Oct-09 01:47:23 START begin_task: Starting task 'sending tracking commands' 2010-Oct-09 01:47:23 LOG5 begin_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2010-Oct-09 01:47:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {j024113+262733} INFO {Slewing to source 'j024113+262733' ...} 2010-Oct-09 01:47:23 INFO1 track_source: Starting to track j024113+262733 2010-Oct-09 01:47:23 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j024113+262733" 2010-Oct-09 01:47:23 LOG3 vw_send: To DATATAKING: set ra 024113.47 2010-Oct-09 01:47:23 LOG3 vw_send: To DATATAKING: set dec 262733.48 2010-Oct-09 01:47:23 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Oct-09 01:47:23 LOG3 vw_send: To DATATAKING: pnt tr 024113.47 262733.48 -CJ 2010-Oct-09 01:47:23 LOG3 vw_send: To DATATAKING: dopsetvel 10098 topo 2010-Oct-09 01:47:23 STOP finish_task: Finishing task 'sending tracking commands' 2010-Oct-09 01:47:23 LOG5 finish_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2010-Oct-09 01:47:23 INFO2 finish_task: DONE finished sending: tracking commands 2010-Oct-09 01:47:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:47:23 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Oct-09 01:47:23 LOG5 end_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2010-Oct-09 01:47:23 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2010-Oct-09 01:47:23 START begin_task: Starting task 'applying pointing corrections' 2010-Oct-09 01:47:23 LOG5 begin_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2010-Oct-09 01:47:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2010-Oct-09 01:47:23 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-09 01:47:23 STOP finish_task: Finishing task 'applying pointing corrections' 2010-Oct-09 01:47:23 LOG5 finish_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2010-Oct-09 01:47:23 INFO2 finish_task: DONE finished applying: pointing corrections 2010-Oct-09 01:47:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:47:23 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2010-Oct-09 01:47:23 LOG5 end_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2010-Oct-09 01:47:23 STOP finish_task: Finishing task 'selecting new source' 2010-Oct-09 01:47:23 LOG5 finish_task: Level: (1) ID = <10113> Status = 0 0 0 0 ok 2010-Oct-09 01:47:23 DONE finish_task: DONE finished selecting: new source 2010-Oct-09 01:47:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-09 01:47:23 END end_task: Finishing task 'selecting new source' with status 'OK' 2010-Oct-09 01:47:23 LOG5 end_task: Level: (1) ID = <10113> Status = 0 0 0 0 ok 2010-Oct-09 01:47:23 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j024113+262733" 2010-Oct-09 01:47:23 LOG4 got_cormsg: From DATATAKING: set ra 024113.47 2010-Oct-09 01:47:23 LOG4 got_cormsg: From DATATAKING: set dec 262733.48 2010-Oct-09 01:47:23 LOG4 got_cormsg: From DATATAKING: vw% 024113.47 2010-Oct-09 01:47:23 LOG4 got_cormsg: From DATATAKING: vw% 262733.48 2010-Oct-09 01:47:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:47:23 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Oct-09 01:47:23 LOG4 got_cormsg: From DATATAKING: pnt tr 024113.47 262733.48 -CJ 2010-Oct-09 01:47:23 LOG4 got_cormsg: From DATATAKING: dopsetvel 10098 topo 2010-Oct-09 01:47:23 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-09 01:47:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:47:23 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-09 01:47:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:47:25 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2010-Oct-09 01:47:25 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 off lcorcal each first one 2010-Oct-09 01:47:25 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 off lcorcal each first one' 2010-Oct-09 01:47:25 BEGIN begin_task: Starting task 'standard on/off' 2010-Oct-09 01:47:25 LOG5 begin_task: Level: (1) ID = <10116> Status = 0 0 0 0 ok 2010-Oct-09 01:47:25 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'j024113+262733' 2010-Oct-09 01:47:25 INFO1 onoff_wapp: Starting pattern: Standard on/off 2010-Oct-09 01:47:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2010-Oct-09 01:47:25 START begin_task: Starting task 'waiting on telescope' 2010-Oct-09 01:47:25 LOG5 begin_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2010-Oct-09 01:47:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-09 01:47:25 LOG3 waittrk: Start waittrk 5 2010-Oct-09 01:47:25 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-09 01:47:25 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2010-Oct-09 01:47:30 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-09 01:47:30 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2010-Oct-09 01:47:30 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-09 01:47:30 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-Oct-09 01:47:55 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-09 01:47:55 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-Oct-09 01:47:55 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-09 01:47:55 INFO2 waittrk: Now tracking j024113+262733 2010-Oct-09 01:47:55 LOG4 waittrk: Current telescope position: Az = 195.06 ZA = 8.47 2010-Oct-09 01:47:55 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-09 01:47:55 LOG5 finish_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2010-Oct-09 01:47:55 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-09 01:47:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:47:56 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-09 01:47:56 LOG5 end_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2010-Oct-09 01:47:56 START begin_task: Starting task 'selecting calibration type' 2010-Oct-09 01:47:56 LOG5 begin_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2010-Oct-09 01:47:56 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-09 01:47:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-09 01:47:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:47:56 START begin_task: Starting task 'waiting on setcal' 2010-Oct-09 01:47:56 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2010-Oct-09 01:47:56 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-09 01:47:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:47:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:47:56 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 01:47:56 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-09 01:47:56 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2010-Oct-09 01:47:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-09 01:47:56 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-09 01:47:56 LOG5 end_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2010-Oct-09 01:47:56 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2010-Oct-09 01:47:56 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2010-Oct-09 01:47:56 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2010-Oct-09 01:47:56 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2010-Oct-09 01:47:56 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2010-Oct-09 01:47:56 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2010-Oct-09 01:47:56 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-09 01:47:56 LOG5 begin_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2010-Oct-09 01:47:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-09 01:47:56 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-09 01:47:56 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j024113+262733" 2010-Oct-09 01:47:56 LOG3 vw_send: To DATATAKING: pnt tr 24113.470000 262733.480000 -CJ 2010-Oct-09 01:47:56 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-09 01:47:56 LOG5 finish_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2010-Oct-09 01:47:56 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-09 01:47:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:47:56 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-09 01:47:56 LOG5 end_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2010-Oct-09 01:47:56 START begin_task: Starting task 'waiting on telescope' 2010-Oct-09 01:47:56 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2010-Oct-09 01:47:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-09 01:47:56 LOG3 waittrk: Start waittrk 5 2010-Oct-09 01:47:56 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-09 01:47:56 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2010-Oct-09 01:47:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2010-Oct-09 01:47:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:47:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j024113+262733" 2010-Oct-09 01:47:56 LOG4 got_cormsg: From DATATAKING: pnt tr 24113.470000 262733.480000 -CJ 2010-Oct-09 01:47:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-09 01:47:57 NOTE WAPPDATA-new_file: New FITS file: wapp.20101009.a2048.0003.fits 2010-Oct-09 01:47:57 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20101009.a2048.0003.fits} 2010-Oct-09 01:48:01 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-09 01:48:01 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2010-Oct-09 01:48:01 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-09 01:48:01 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2010-Oct-09 01:48:03 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-09 01:48:03 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2010-Oct-09 01:48:03 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-09 01:48:03 INFO2 waittrk: Now tracking j024113+262733 2010-Oct-09 01:48:03 LOG4 waittrk: Current telescope position: Az = 194.87 ZA = 8.47 2010-Oct-09 01:48:03 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-09 01:48:03 LOG5 finish_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2010-Oct-09 01:48:03 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-09 01:48:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:48:03 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-09 01:48:03 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2010-Oct-09 01:48:04 LOG5 antvel: Calling 'antvel 24113.470000 262733.480000 J Topocentric 0' 2010-Oct-09 01:48:04 LOG2 antvel: Precessing RA = 02:41:13.5 Dec = +26:27:33.5 Epoch = 2010.77228 J 2010-Oct-09 01:48:04 LOG2 antvel: Computed apparent RA = 02:41:53.6 Dec = +26:30:27.7 2010-Oct-09 01:48:04 LOG2 antvel: Parameters to Doppler: Topocentric 20883 2010 282 0.0 2010-Oct-09 01:48:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Oct-09 01:48:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=10098.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-Oct-09 01:48:04 INFO4 dopset_gen: New sky frequencies: 1374.120825 1374.120825 1374.120825 1374.120825 1374.120825 1374.120825 1374.120825 1374.120825 1374.120825 2010-Oct-09 01:48:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1374.120825 sky0=1374.120825 sky1=1374.120825 sky2=1374.120825 sky3=1374.120825 sky4=1374.120825 sky5=1374.120825 sky6=1374.120825 sky7=1374.120825 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2010-Oct-09 01:48:04 LOG2 dopset_gen: Result from 'sky2syn': 11374.120825 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2010-Oct-09 01:48:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11374120825.0} 2010-Oct-09 01:48:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-09 01:48:04 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-09 01:48:04 LOG5 begin_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2010-Oct-09 01:48:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Oct-09 01:48:04 INFO2 adjust_power: Starting to adjust WAPP power 2010-Oct-09 01:48:04 LOG3 vw_send: To DATATAKING: adjpwrif1 2010-Oct-09 01:48:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2010-Oct-09 01:48:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:48:04 START begin_task: Starting task 'waiting on adjpwrif1' 2010-Oct-09 01:48:04 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2010-Oct-09 01:48:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11374120825.0} 2010-Oct-09 01:48:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-09 01:48:04 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2010-Oct-09 01:48:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:48:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:48:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:48:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:48:04 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 01:48:04 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2010-Oct-09 01:48:04 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2010-Oct-09 01:48:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2010-Oct-09 01:48:04 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Oct-09 01:48:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Oct-09 01:48:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:48:04 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Oct-09 01:48:04 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2010-Oct-09 01:48:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:48:04 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Oct-09 01:48:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:48:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:48:04 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 01:48:04 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Oct-09 01:48:04 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2010-Oct-09 01:48:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Oct-09 01:48:04 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-09 01:48:04 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Oct-09 01:48:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Oct-09 01:48:04 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2010-Oct-09 01:48:04 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2010-Oct-09 01:48:04 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2010-Oct-09 01:48:04 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2010-Oct-09 01:48:05 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Oct-09 01:48:05 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2010-Oct-09 01:48:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:48:05 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2010-Oct-09 01:48:05 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2010-Oct-09 01:48:05 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 13 8 dB 2010-Oct-09 01:48:05 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2010-Oct-09 01:48:05 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2010-Oct-09 01:48:05 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 15 0 dB 2010-Oct-09 01:48:05 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 2 12 dB 2010-Oct-09 01:48:05 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 3 15 dB 2010-Oct-09 01:48:05 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Oct-09 01:48:05 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Oct-09 01:48:05 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2010-Oct-09 01:48:05 INFO2 wapp_adjpwr: WAPP power: 0.928 0.981 1.072 1.080 2010-Oct-09 01:48:05 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-09 01:48:05 LOG5 finish_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Oct-09 01:48:05 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Oct-09 01:48:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:48:05 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-09 01:48:05 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Oct-09 01:48:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-09 01:48:05 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-09 01:48:05 LOG5 finish_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2010-Oct-09 01:48:05 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Oct-09 01:48:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:48:05 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-09 01:48:05 LOG5 end_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2010-Oct-09 01:48:05 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON stat_onoff_on {ON scan}' 2010-Oct-09 01:48:05 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-09 01:48:05 LOG5 begin_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2010-Oct-09 01:48:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for ON scan ...} 2010-Oct-09 01:48:05 INFO2 take_data: Starting WAPP 300-second scan: 28200013 2010-Oct-09 01:48:06 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-09 01:48:06 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2010-Oct-09 01:48:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-09 01:48:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2010-Oct-09 01:48:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20887.00 2010-Oct-09 01:48:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11374.120825 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-09 01:48:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1374.120825 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:48:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1374.120825 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:48:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1374.120825 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:48:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1374.120825 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:48:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764082 != 85764081 diff = 1)! 2010-Oct-09 01:48:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85769344 != 85769343 diff = 1)! 2010-Oct-09 01:48:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85769344 != 85769343 diff = 1)! 2010-Oct-09 01:48:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85769344 != 85769343 diff = 1)! 2010-Oct-09 01:48:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85769344 != 85769343 diff = 1)! 2010-Oct-09 01:48:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85769344 != 85769343 diff = 1)! 2010-Oct-09 01:48:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85769344 != 85769343 diff = 1)! 2010-Oct-09 01:48:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85769344 != 85769343 diff = 1)! 2010-Oct-09 01:48:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85773850 != 85773849 diff = 1)! 2010-Oct-09 01:48:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764090 != 85764089 diff = 1)! 2010-Oct-09 01:48:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764090 != 85764089 diff = 1)! 2010-Oct-09 01:48:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764090 != 85764089 diff = 1)! 2010-Oct-09 01:49:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85785782 != 85785781 diff = 1)! 2010-Oct-09 01:49:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804166 != 85804165 diff = 1)! 2010-Oct-09 01:49:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804166 != 85804165 diff = 1)! 2010-Oct-09 01:49:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804166 != 85804165 diff = 1)! 2010-Oct-09 01:49:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804166 != 85804165 diff = 1)! 2010-Oct-09 01:49:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804166 != 85804165 diff = 1)! 2010-Oct-09 01:49:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804166 != 85804165 diff = 1)! 2010-Oct-09 01:49:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804166 != 85804165 diff = 1)! 2010-Oct-09 01:49:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804168 != 85804167 diff = 1)! 2010-Oct-09 01:49:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804168 != 85804167 diff = 1)! 2010-Oct-09 01:49:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804168 != 85804167 diff = 1)! 2010-Oct-09 01:49:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804168 != 85804167 diff = 1)! 2010-Oct-09 01:49:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804168 != 85804167 diff = 1)! 2010-Oct-09 01:49:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804168 != 85804167 diff = 1)! 2010-Oct-09 01:49:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804168 != 85804167 diff = 1)! 2010-Oct-09 01:49:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804193 != 85804192 diff = 1)! 2010-Oct-09 01:49:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804193 != 85804194 diff = 1)! 2010-Oct-09 01:49:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804193 != 85804192 diff = 1)! 2010-Oct-09 01:49:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85804193 != 85804194 diff = 1)! 2010-Oct-09 01:50:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764042 != 85764041 diff = 1)! 2010-Oct-09 01:50:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804182 != 85804181 diff = 1)! 2010-Oct-09 01:50:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804182 != 85804180 diff = 2)! 2010-Oct-09 01:50:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804182 != 85804179 diff = 3)! 2010-Oct-09 01:50:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804182 != 85804179 diff = 3)! 2010-Oct-09 01:50:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804182 != 85804181 diff = 1)! 2010-Oct-09 01:50:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804182 != 85804181 diff = 1)! 2010-Oct-09 01:50:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804182 != 85804180 diff = 2)! 2010-Oct-09 01:50:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764086 != 85764085 diff = 1)! 2010-Oct-09 01:50:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764086 != 85764085 diff = 1)! 2010-Oct-09 01:50:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764086 != 85764085 diff = 1)! 2010-Oct-09 01:50:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764086 != 85764085 diff = 1)! 2010-Oct-09 01:50:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764086 != 85764085 diff = 1)! 2010-Oct-09 01:50:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764086 != 85764085 diff = 1)! 2010-Oct-09 01:50:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804162 != 85804161 diff = 1)! 2010-Oct-09 01:50:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764088 != 85764087 diff = 1)! 2010-Oct-09 01:50:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85788696 != 85788695 diff = 1)! 2010-Oct-09 01:50:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85788696 != 85788695 diff = 1)! 2010-Oct-09 01:51:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804157 != 85804158 diff = 1)! 2010-Oct-09 01:51:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804180 != 85804179 diff = 1)! 2010-Oct-09 01:51:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804180 != 85804179 diff = 1)! 2010-Oct-09 01:51:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804180 != 85804179 diff = 1)! 2010-Oct-09 01:51:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804180 != 85804179 diff = 1)! 2010-Oct-09 01:51:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804180 != 85804179 diff = 1)! 2010-Oct-09 01:51:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804180 != 85804179 diff = 1)! 2010-Oct-09 01:51:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804180 != 85804179 diff = 1)! 2010-Oct-09 01:51:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804172 != 85804171 diff = 1)! 2010-Oct-09 01:51:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804172 != 85804171 diff = 1)! 2010-Oct-09 01:51:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804172 != 85804171 diff = 1)! 2010-Oct-09 01:51:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804172 != 85804171 diff = 1)! 2010-Oct-09 01:51:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804172 != 85804171 diff = 1)! 2010-Oct-09 01:51:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804172 != 85804171 diff = 1)! 2010-Oct-09 01:51:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804172 != 85804171 diff = 1)! 2010-Oct-09 01:51:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764086 != 85764085 diff = 1)! 2010-Oct-09 01:51:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764086 != 85764085 diff = 1)! 2010-Oct-09 01:51:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764086 != 85764085 diff = 1)! 2010-Oct-09 01:51:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764086 != 85764085 diff = 1)! 2010-Oct-09 01:51:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764086 != 85764085 diff = 1)! 2010-Oct-09 01:51:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764086 != 85764085 diff = 1)! 2010-Oct-09 01:51:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764086 != 85764085 diff = 1)! 2010-Oct-09 01:51:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764086 != 85764085 diff = 1)! 2010-Oct-09 01:51:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804186 != 85804185 diff = 1)! 2010-Oct-09 01:51:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804186 != 85804185 diff = 1)! 2010-Oct-09 01:51:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804186 != 85804185 diff = 1)! 2010-Oct-09 01:51:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804186 != 85804185 diff = 1)! 2010-Oct-09 01:51:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804186 != 85804185 diff = 1)! 2010-Oct-09 01:51:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804186 != 85804185 diff = 1)! 2010-Oct-09 01:51:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804186 != 85804185 diff = 1)! 2010-Oct-09 01:51:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804186 != 85804185 diff = 1)! 2010-Oct-09 01:52:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85776237 != 85776238 diff = 1)! 2010-Oct-09 01:52:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85776237 != 85776238 diff = 1)! 2010-Oct-09 01:52:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85776237 != 85776238 diff = 1)! 2010-Oct-09 01:52:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85776237 != 85776238 diff = 1)! 2010-Oct-09 01:52:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85776237 != 85776238 diff = 1)! 2010-Oct-09 01:52:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85776237 != 85776238 diff = 1)! 2010-Oct-09 01:52:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804170 != 85804169 diff = 1)! 2010-Oct-09 01:52:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764096 != 85764095 diff = 1)! 2010-Oct-09 01:52:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764096 != 85764095 diff = 1)! 2010-Oct-09 01:52:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804170 != 85804169 diff = 1)! 2010-Oct-09 01:52:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804170 != 85804169 diff = 1)! 2010-Oct-09 01:52:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804170 != 85804169 diff = 1)! 2010-Oct-09 01:52:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804170 != 85804169 diff = 1)! 2010-Oct-09 01:52:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804170 != 85804169 diff = 1)! 2010-Oct-09 01:52:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804170 != 85804169 diff = 1)! 2010-Oct-09 01:52:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804170 != 85804169 diff = 1)! 2010-Oct-09 01:53:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85795694 != 85795693 diff = 1)! 2010-Oct-09 01:53:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-09 01:53:07 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-09 01:53:07 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2010-Oct-09 01:53:07 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-09 01:53:07 LOG5 end_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2010-Oct-09 01:53:07 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2010-Oct-09 01:53:07 LOG2 onoff_wapp: Parameters: RA-offset: -90.706200000000123 arcminutes wait: 60 secs 2010-Oct-09 01:53:07 LOG4 track_offsets: Calling 'track_offsets -90.706200000000123 0.0 main small' 2010-Oct-09 01:53:07 START begin_task: Starting task 'sending telescope offsets' 2010-Oct-09 01:53:07 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2010-Oct-09 01:53:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2010-Oct-09 01:53:07 INFO2 track_offsets: Starting to send new offsets 2010-Oct-09 01:53:07 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j024113+262733" 2010-Oct-09 01:53:07 LOG3 vw_send: To DATATAKING: pnt tr 24113.470000 262733.480000 -CJ -o -UD -1.51177 0.0 -CH 2010-Oct-09 01:53:07 STOP finish_task: Finishing task 'sending telescope offsets' 2010-Oct-09 01:53:07 LOG5 finish_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2010-Oct-09 01:53:07 INFO2 finish_task: DONE finished sending: telescope offsets 2010-Oct-09 01:53:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:53:07 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2010-Oct-09 01:53:07 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2010-Oct-09 01:53:07 INFO2 lstwait: Waiting for 59.8 secs from LST 02:37:05 to LST 02:38:05 ... 2010-Oct-09 01:53:07 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836175999999789 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Oct-09 01:53:07 START begin_task: Starting task 'waiting on wait on LST' 2010-Oct-09 01:53:07 LOG5 begin_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2010-Oct-09 01:53:07 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j024113+262733" 2010-Oct-09 01:53:07 LOG4 got_cormsg: From DATATAKING: pnt tr 24113.470000 262733.480000 -CJ -o -UD -1.51177 0.0 -CH 2010-Oct-09 01:53:07 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-09 01:53:40 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'j024113+262733' (after 33 seconds) 2010-Oct-09 01:53:40 LOG3 wait_and_tell_when_on_source: The telescope arrived at source with 27 seconds to spare (33 < 60 seconds) 2010-Oct-09 01:54:07 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-Oct-09 01:54:07 LOG5 end_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2010-Oct-09 01:54:07 LOG4 lstwait: Finished waiting 0.17 seconds late 2010-Oct-09 01:54:07 INFO3 lstwait: Finished waiting 2010-Oct-09 01:54:07 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Oct-09 01:54:07 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF stat_onoff_off {OFF scan}' 2010-Oct-09 01:54:07 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-09 01:54:07 LOG5 begin_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2010-Oct-09 01:54:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for OFF scan ...} 2010-Oct-09 01:54:07 INFO2 take_data: Starting WAPP 300-second scan: 28200014 2010-Oct-09 01:54:08 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-09 01:54:08 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2010-Oct-09 01:54:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-09 01:54:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2010-Oct-09 01:54:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21249.00 2010-Oct-09 01:54:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11374.120825 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-09 01:54:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1374.120825 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:54:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1374.120825 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:54:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1374.120825 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:54:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1374.120825 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:54:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764070 != 85764069 diff = 1)! 2010-Oct-09 01:54:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764070 != 85764069 diff = 1)! 2010-Oct-09 01:54:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764070 != 85764069 diff = 1)! 2010-Oct-09 01:54:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804199 != 85804200 diff = 1)! 2010-Oct-09 01:54:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804199 != 85804200 diff = 1)! 2010-Oct-09 01:54:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85804199 != 85804200 diff = 1)! 2010-Oct-09 01:54:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804199 != 85804200 diff = 1)! 2010-Oct-09 01:54:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85804199 != 85804200 diff = 1)! 2010-Oct-09 01:54:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85786224 != 85786223 diff = 1)! 2010-Oct-09 01:54:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85786224 != 85786223 diff = 1)! 2010-Oct-09 01:54:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85786224 != 85786223 diff = 1)! 2010-Oct-09 01:54:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85786224 != 85786223 diff = 1)! 2010-Oct-09 01:54:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85786224 != 85786223 diff = 1)! 2010-Oct-09 01:54:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85786224 != 85786223 diff = 1)! 2010-Oct-09 01:54:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85786224 != 85786223 diff = 1)! 2010-Oct-09 01:54:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85794598 != 85794597 diff = 1)! 2010-Oct-09 01:54:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85794598 != 85794597 diff = 1)! 2010-Oct-09 01:54:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85794598 != 85794597 diff = 1)! 2010-Oct-09 01:54:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85794598 != 85794597 diff = 1)! 2010-Oct-09 01:54:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85794598 != 85794597 diff = 1)! 2010-Oct-09 01:54:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85794598 != 85794597 diff = 1)! 2010-Oct-09 01:54:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85794598 != 85794597 diff = 1)! 2010-Oct-09 01:55:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804182 != 85804181 diff = 1)! 2010-Oct-09 01:55:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764068 != 85764067 diff = 1)! 2010-Oct-09 01:56:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764083 != 85764084 diff = 1)! 2010-Oct-09 01:56:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764083 != 85764082 diff = 1)! 2010-Oct-09 01:58:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804182 != 85804181 diff = 1)! 2010-Oct-09 01:58:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85800910 != 85800909 diff = 1)! 2010-Oct-09 01:58:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85800910 != 85800909 diff = 1)! 2010-Oct-09 01:58:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85800910 != 85800909 diff = 1)! 2010-Oct-09 01:58:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85800910 != 85800909 diff = 1)! 2010-Oct-09 01:58:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85800910 != 85800909 diff = 1)! 2010-Oct-09 01:58:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85800910 != 85800909 diff = 1)! 2010-Oct-09 01:58:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85800910 != 85800909 diff = 1)! 2010-Oct-09 01:58:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85800910 != 85800909 diff = 1)! 2010-Oct-09 01:58:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85775838 != 85775837 diff = 1)! 2010-Oct-09 01:58:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85775838 != 85775837 diff = 1)! 2010-Oct-09 01:58:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85775838 != 85775837 diff = 1)! 2010-Oct-09 01:58:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85775838 != 85775837 diff = 1)! 2010-Oct-09 01:58:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85775838 != 85775837 diff = 1)! 2010-Oct-09 01:59:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85795263 != 85795264 diff = 1)! 2010-Oct-09 01:59:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85795263 != 85795264 diff = 1)! 2010-Oct-09 01:59:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85795263 != 85795264 diff = 1)! 2010-Oct-09 01:59:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85795263 != 85795264 diff = 1)! 2010-Oct-09 01:59:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85795263 != 85795264 diff = 1)! 2010-Oct-09 01:59:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-09 01:59:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-09 01:59:09 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2010-Oct-09 01:59:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-09 01:59:09 LOG5 end_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2010-Oct-09 01:59:09 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2010-Oct-09 01:59:09 START begin_task: Starting task 'WAPP calibration' 2010-Oct-09 01:59:09 LOG5 begin_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2010-Oct-09 01:59:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Oct-09 01:59:09 START begin_task: Starting task 'selecting calibration type' 2010-Oct-09 01:59:09 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2010-Oct-09 01:59:09 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-09 01:59:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-09 01:59:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:59:09 START begin_task: Starting task 'waiting on setcal' 2010-Oct-09 01:59:09 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2010-Oct-09 01:59:09 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-09 01:59:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 01:59:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:59:09 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 01:59:09 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-09 01:59:09 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2010-Oct-09 01:59:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-09 01:59:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-09 01:59:09 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2010-Oct-09 01:59:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Oct-09 01:59:09 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Oct-09 01:59:09 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Oct-09 01:59:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-09 01:59:09 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2010-Oct-09 01:59:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:59:09 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-09 01:59:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Oct-09 01:59:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-09 01:59:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-09 01:59:09 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2010-Oct-09 01:59:09 LOG4 take_data: Calling 'take_data 10 10 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Oct-09 01:59:09 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-09 01:59:09 LOG5 begin_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2010-Oct-09 01:59:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Oct-09 01:59:10 INFO2 take_data: Starting WAPP 10-second scan: 28200015 2010-Oct-09 01:59:10 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-09 01:59:10 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2010-Oct-09 01:59:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-09 01:59:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Oct-09 01:59:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21551.00 2010-Oct-09 01:59:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11374.120825 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-09 01:59:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1374.120825 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:59:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1374.120825 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:59:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1374.120825 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:59:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1374.120825 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:59:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-09 01:59:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-09 01:59:21 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2010-Oct-09 01:59:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-09 01:59:21 LOG5 end_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2010-Oct-09 01:59:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Oct-09 01:59:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Oct-09 01:59:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Oct-09 01:59:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-09 01:59:21 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2010-Oct-09 01:59:21 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-09 01:59:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Oct-09 01:59:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-09 01:59:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-09 01:59:21 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2010-Oct-09 01:59:21 LOG4 take_data: Calling 'take_data 10 10 CAL OFF stat_cal_off {CAL-OFF spectra}' 2010-Oct-09 01:59:21 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-09 01:59:21 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-Oct-09 01:59:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2010-Oct-09 01:59:21 INFO2 take_data: Starting WAPP 10-second scan: 28200016 2010-Oct-09 01:59:22 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-09 01:59:22 LOG5 begin_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2010-Oct-09 01:59:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-09 01:59:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2010-Oct-09 01:59:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21563.00 2010-Oct-09 01:59:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11374.120825 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-09 01:59:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1374.120825 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:59:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1374.120825 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:59:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1374.120825 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:59:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1374.120825 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 01:59:33 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2010-Oct-09 01:59:33 INFO1 WAPP=2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-09 01:59:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-09 01:59:33 LOG5 end_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2010-Oct-09 01:59:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-09 01:59:33 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-Oct-09 01:59:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-09 01:59:33 STOP finish_task: Finishing task 'WAPP calibration' 2010-Oct-09 01:59:33 LOG5 finish_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2010-Oct-09 01:59:33 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Oct-09 01:59:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:59:33 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Oct-09 01:59:33 LOG5 end_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2010-Oct-09 01:59:33 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-09 01:59:33 LOG5 begin_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2010-Oct-09 01:59:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-09 01:59:33 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-09 01:59:33 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j024113+262733" 2010-Oct-09 01:59:33 LOG3 vw_send: To DATATAKING: pnt tr 24113.470000 262733.480000 -CJ 2010-Oct-09 01:59:33 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-09 01:59:33 LOG5 finish_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2010-Oct-09 01:59:33 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-09 01:59:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:59:33 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-09 01:59:33 LOG5 end_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2010-Oct-09 01:59:33 STOP finish_task: Finishing task 'standard on/off' 2010-Oct-09 01:59:33 LOG5 finish_task: Level: (1) ID = <10116> Status = 0 0 0 0 ok 2010-Oct-09 01:59:33 DONE finish_task: DONE finished pattern: standard on/off 2010-Oct-09 01:59:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-09 01:59:34 END end_task: Finishing task 'standard on/off' with status 'OK' 2010-Oct-09 01:59:34 LOG5 end_task: Level: (1) ID = <10116> Status = 0 0 0 0 ok 2010-Oct-09 01:59:34 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j024113+262733" 2010-Oct-09 01:59:34 INFO1 WAPP=1-start_spectra: DONE with spectral line observation 2010-Oct-09 01:59:34 LOG4 got_cormsg: From DATATAKING: pnt tr 24113.470000 262733.480000 -CJ 2010-Oct-09 01:59:34 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-09 01:59:38 COMMAND CIMA-send_to_exec: Sending command to point to a source 2010-Oct-09 01:59:38 LOG4 exec_msg: From OBSERVER: track_new_source j023647+263135 023646.74 263135.09 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 590 Topocentric velocity(optical) 0 0 0.0 0.0 0 2010-Oct-09 01:59:38 LOG1 track_new_source: Calling 'track_new_source j023647+263135 023646.74 263135.09 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 590 Topocentric velocity(optical) 0 0 0.0 0.0 0' 2010-Oct-09 01:59:38 BEGIN begin_task: Starting task 'selecting new source' 2010-Oct-09 01:59:38 LOG5 begin_task: Level: (1) ID = <10147> Status = 0 0 0 0 ok 2010-Oct-09 01:59:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {j023647+263135} INFO {Selecting source 'j023647+263135' ...} 2010-Oct-09 01:59:38 LOG3 track_source: Calling 'track_source j023647+263135 023646.74 263135.09 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 590 Topocentric velocity(optical)' 2010-Oct-09 01:59:38 START begin_task: Starting task 'sending tracking commands' 2010-Oct-09 01:59:38 LOG5 begin_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2010-Oct-09 01:59:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {j023647+263135} INFO {Slewing to source 'j023647+263135' ...} 2010-Oct-09 01:59:38 INFO1 track_source: Starting to track j023647+263135 2010-Oct-09 01:59:38 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023647+263135" 2010-Oct-09 01:59:38 LOG3 vw_send: To DATATAKING: set ra 023646.74 2010-Oct-09 01:59:38 LOG3 vw_send: To DATATAKING: set dec 263135.09 2010-Oct-09 01:59:38 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Oct-09 01:59:38 LOG3 vw_send: To DATATAKING: pnt tr 023646.74 263135.09 -CJ 2010-Oct-09 01:59:38 LOG3 vw_send: To DATATAKING: dopsetvel 590 topo 2010-Oct-09 01:59:38 STOP finish_task: Finishing task 'sending tracking commands' 2010-Oct-09 01:59:38 LOG5 finish_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2010-Oct-09 01:59:38 INFO2 finish_task: DONE finished sending: tracking commands 2010-Oct-09 01:59:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:59:38 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Oct-09 01:59:38 LOG5 end_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2010-Oct-09 01:59:38 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2010-Oct-09 01:59:38 START begin_task: Starting task 'applying pointing corrections' 2010-Oct-09 01:59:38 LOG5 begin_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2010-Oct-09 01:59:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2010-Oct-09 01:59:38 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-09 01:59:38 STOP finish_task: Finishing task 'applying pointing corrections' 2010-Oct-09 01:59:38 LOG5 finish_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2010-Oct-09 01:59:38 INFO2 finish_task: DONE finished applying: pointing corrections 2010-Oct-09 01:59:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 01:59:38 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2010-Oct-09 01:59:38 LOG5 end_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2010-Oct-09 01:59:38 STOP finish_task: Finishing task 'selecting new source' 2010-Oct-09 01:59:38 LOG5 finish_task: Level: (1) ID = <10147> Status = 0 0 0 0 ok 2010-Oct-09 01:59:38 DONE finish_task: DONE finished selecting: new source 2010-Oct-09 01:59:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-09 01:59:38 END end_task: Finishing task 'selecting new source' with status 'OK' 2010-Oct-09 01:59:38 LOG5 end_task: Level: (1) ID = <10147> Status = 0 0 0 0 ok 2010-Oct-09 01:59:38 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023647+263135" 2010-Oct-09 01:59:38 LOG4 got_cormsg: From DATATAKING: set ra 023646.74 2010-Oct-09 01:59:38 LOG4 got_cormsg: From DATATAKING: set dec 263135.09 2010-Oct-09 01:59:38 LOG4 got_cormsg: From DATATAKING: vw% 023646.74 2010-Oct-09 01:59:38 LOG4 got_cormsg: From DATATAKING: vw% 263135.09 2010-Oct-09 01:59:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:59:38 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Oct-09 01:59:39 LOG4 got_cormsg: From DATATAKING: pnt tr 023646.74 263135.09 -CJ 2010-Oct-09 01:59:39 LOG4 got_cormsg: From DATATAKING: dopsetvel 590 topo 2010-Oct-09 01:59:39 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-09 01:59:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:59:39 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-09 01:59:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 01:59:41 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2010-Oct-09 01:59:41 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 off lcorcal each first one 2010-Oct-09 01:59:41 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 off lcorcal each first one' 2010-Oct-09 01:59:41 BEGIN begin_task: Starting task 'standard on/off' 2010-Oct-09 01:59:41 LOG5 begin_task: Level: (1) ID = <10150> Status = 0 0 0 0 ok 2010-Oct-09 01:59:41 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'j023647+263135' 2010-Oct-09 01:59:41 INFO1 onoff_wapp: Starting pattern: Standard on/off 2010-Oct-09 01:59:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2010-Oct-09 01:59:41 START begin_task: Starting task 'waiting on telescope' 2010-Oct-09 01:59:41 LOG5 begin_task: Level: (2) ID = <10151> Status = 0 0 0 0 ok 2010-Oct-09 01:59:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-09 01:59:41 LOG3 waittrk: Start waittrk 5 2010-Oct-09 01:59:41 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-09 01:59:41 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2010-Oct-09 01:59:46 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-09 01:59:46 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2010-Oct-09 01:59:47 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-09 01:59:47 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2010-Oct-09 02:00:29 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-09 02:00:29 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2010-Oct-09 02:00:29 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-09 02:00:29 INFO2 waittrk: Now tracking j023647+263135 2010-Oct-09 02:00:29 LOG4 waittrk: Current telescope position: Az = 168.88 ZA = 8.38 2010-Oct-09 02:00:29 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-09 02:00:29 LOG5 finish_task: Level: (2) ID = <10151> Status = 0 0 0 0 ok 2010-Oct-09 02:00:29 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-09 02:00:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 02:00:29 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-09 02:00:29 LOG5 end_task: Level: (2) ID = <10151> Status = 0 0 0 0 ok 2010-Oct-09 02:00:29 START begin_task: Starting task 'selecting calibration type' 2010-Oct-09 02:00:29 LOG5 begin_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2010-Oct-09 02:00:29 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-09 02:00:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-09 02:00:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 02:00:29 START begin_task: Starting task 'waiting on setcal' 2010-Oct-09 02:00:29 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-Oct-09 02:00:29 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-09 02:00:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 02:00:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 02:00:29 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 02:00:29 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-09 02:00:29 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-Oct-09 02:00:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-09 02:00:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-09 02:00:29 LOG5 end_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2010-Oct-09 02:00:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2010-Oct-09 02:00:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2010-Oct-09 02:00:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2010-Oct-09 02:00:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2010-Oct-09 02:00:30 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2010-Oct-09 02:00:30 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2010-Oct-09 02:00:30 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-09 02:00:30 LOG5 begin_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2010-Oct-09 02:00:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-09 02:00:30 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-09 02:00:30 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023647+263135" 2010-Oct-09 02:00:30 LOG3 vw_send: To DATATAKING: pnt tr 23646.740000 263135.090000 -CJ 2010-Oct-09 02:00:30 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-09 02:00:30 LOG5 finish_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2010-Oct-09 02:00:30 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-09 02:00:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 02:00:30 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-09 02:00:30 LOG5 end_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2010-Oct-09 02:00:30 START begin_task: Starting task 'waiting on telescope' 2010-Oct-09 02:00:30 LOG5 begin_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2010-Oct-09 02:00:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-09 02:00:30 LOG3 waittrk: Start waittrk 5 2010-Oct-09 02:00:30 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-09 02:00:30 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2010-Oct-09 02:00:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2010-Oct-09 02:00:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 02:00:30 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023647+263135" 2010-Oct-09 02:00:30 LOG4 got_cormsg: From DATATAKING: pnt tr 23646.740000 263135.090000 -CJ 2010-Oct-09 02:00:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-09 02:00:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20101009.a2048.0004.fits 2010-Oct-09 02:00:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20101009.a2048.0004.fits} 2010-Oct-09 02:00:35 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-09 02:00:35 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2010-Oct-09 02:00:35 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-09 02:00:35 LOG5 begin_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2010-Oct-09 02:00:37 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-09 02:00:37 LOG5 end_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2010-Oct-09 02:00:37 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-09 02:00:37 INFO2 waittrk: Now tracking j023647+263135 2010-Oct-09 02:00:37 LOG4 waittrk: Current telescope position: Az = 168.67 ZA = 8.39 2010-Oct-09 02:00:37 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-09 02:00:37 LOG5 finish_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2010-Oct-09 02:00:37 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-09 02:00:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 02:00:37 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-09 02:00:37 LOG5 end_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2010-Oct-09 02:00:37 LOG5 antvel: Calling 'antvel 23646.740000 263135.090000 J Topocentric 0' 2010-Oct-09 02:00:37 LOG2 antvel: Precessing RA = 02:36:46.7 Dec = +26:31:35.1 Epoch = 2010.77230 J 2010-Oct-09 02:00:37 LOG2 antvel: Computed apparent RA = 02:37:26.8 Dec = +26:34:32.2 2010-Oct-09 02:00:37 LOG2 antvel: Parameters to Doppler: Topocentric 21637 2010 282 0.0 2010-Oct-09 02:00:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Oct-09 02:00:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=590.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-Oct-09 02:00:37 INFO4 dopset_gen: New sky frequencies: 1417.615844 1417.615844 1417.615844 1417.615844 1417.615844 1417.615844 1417.615844 1417.615844 1417.615844 2010-Oct-09 02:00:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1417.615844 sky0=1417.615844 sky1=1417.615844 sky2=1417.615844 sky3=1417.615844 sky4=1417.615844 sky5=1417.615844 sky6=1417.615844 sky7=1417.615844 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2010-Oct-09 02:00:37 LOG2 dopset_gen: Result from 'sky2syn': 11417.615844 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2010-Oct-09 02:00:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11417615844.0} 2010-Oct-09 02:00:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-09 02:00:37 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-09 02:00:37 LOG5 begin_task: Level: (2) ID = <10160> Status = 0 0 0 0 ok 2010-Oct-09 02:00:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Oct-09 02:00:37 INFO2 adjust_power: Starting to adjust WAPP power 2010-Oct-09 02:00:37 LOG3 vw_send: To DATATAKING: adjpwrif1 2010-Oct-09 02:00:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2010-Oct-09 02:00:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 02:00:37 START begin_task: Starting task 'waiting on adjpwrif1' 2010-Oct-09 02:00:37 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2010-Oct-09 02:00:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11417615844.0} 2010-Oct-09 02:00:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-09 02:00:37 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2010-Oct-09 02:00:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 02:00:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 02:00:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 02:00:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 02:00:38 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 02:00:38 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2010-Oct-09 02:00:38 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2010-Oct-09 02:00:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2010-Oct-09 02:00:38 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Oct-09 02:00:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Oct-09 02:00:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 02:00:38 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Oct-09 02:00:38 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-Oct-09 02:00:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 02:00:38 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Oct-09 02:00:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 02:00:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 02:00:39 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 02:00:39 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Oct-09 02:00:39 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-Oct-09 02:00:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Oct-09 02:00:39 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-09 02:00:39 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2010-Oct-09 02:00:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Oct-09 02:00:39 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2010-Oct-09 02:00:39 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2010-Oct-09 02:00:39 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2010-Oct-09 02:00:39 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2010-Oct-09 02:00:39 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Oct-09 02:00:39 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2010-Oct-09 02:00:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 02:00:40 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 10 8 dB 2010-Oct-09 02:00:40 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2010-Oct-09 02:00:40 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2010-Oct-09 02:00:40 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2010-Oct-09 02:00:40 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2010-Oct-09 02:00:40 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 13 0 dB 2010-Oct-09 02:00:40 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 2 10 dB 2010-Oct-09 02:00:40 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 3 14 dB 2010-Oct-09 02:00:40 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Oct-09 02:00:40 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Oct-09 02:00:40 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2010-Oct-09 02:00:40 INFO2 wapp_adjpwr: WAPP power: 1.050 1.081 0.980 0.927 2010-Oct-09 02:00:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-09 02:00:40 LOG5 finish_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2010-Oct-09 02:00:40 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Oct-09 02:00:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 02:00:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-09 02:00:40 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2010-Oct-09 02:00:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-09 02:00:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-09 02:00:40 LOG5 finish_task: Level: (2) ID = <10160> Status = 0 0 0 0 ok 2010-Oct-09 02:00:40 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Oct-09 02:00:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 02:00:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-09 02:00:40 LOG5 end_task: Level: (2) ID = <10160> Status = 0 0 0 0 ok 2010-Oct-09 02:00:40 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON stat_onoff_on {ON scan}' 2010-Oct-09 02:00:40 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-09 02:00:40 LOG5 begin_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2010-Oct-09 02:00:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for ON scan ...} 2010-Oct-09 02:00:40 INFO2 take_data: Starting WAPP 300-second scan: 28200017 2010-Oct-09 02:00:41 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-09 02:00:41 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2010-Oct-09 02:00:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-09 02:00:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2010-Oct-09 02:00:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21642.00 2010-Oct-09 02:00:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11417.615844 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-09 02:00:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1417.615844 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:00:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1417.615844 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:00:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1417.615844 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:00:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1417.615844 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:00:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85772692 != 85772691 diff = 1)! 2010-Oct-09 02:00:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764088 != 85764087 diff = 1)! 2010-Oct-09 02:00:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764088 != 85764087 diff = 1)! 2010-Oct-09 02:00:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764088 != 85764087 diff = 1)! 2010-Oct-09 02:00:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764088 != 85764087 diff = 1)! 2010-Oct-09 02:00:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764088 != 85764087 diff = 1)! 2010-Oct-09 02:00:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764088 != 85764087 diff = 1)! 2010-Oct-09 02:00:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764088 != 85764087 diff = 1)! 2010-Oct-09 02:00:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764076 != 85764075 diff = 1)! 2010-Oct-09 02:00:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764076 != 85764075 diff = 1)! 2010-Oct-09 02:00:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764076 != 85764075 diff = 1)! 2010-Oct-09 02:00:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764076 != 85764075 diff = 1)! 2010-Oct-09 02:00:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764076 != 85764075 diff = 1)! 2010-Oct-09 02:01:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85801272 != 85801271 diff = 1)! 2010-Oct-09 02:01:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85767007 != 85767008 diff = 1)! 2010-Oct-09 02:01:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85767007 != 85767008 diff = 1)! 2010-Oct-09 02:01:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85767007 != 85767008 diff = 1)! 2010-Oct-09 02:01:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85767007 != 85767008 diff = 1)! 2010-Oct-09 02:01:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85767007 != 85767008 diff = 1)! 2010-Oct-09 02:01:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85767007 != 85767008 diff = 1)! 2010-Oct-09 02:01:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764086 != 85764085 diff = 1)! 2010-Oct-09 02:01:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764064 != 85764063 diff = 1)! 2010-Oct-09 02:01:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764064 != 85764063 diff = 1)! 2010-Oct-09 02:01:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764064 != 85764063 diff = 1)! 2010-Oct-09 02:01:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764064 != 85764063 diff = 1)! 2010-Oct-09 02:01:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764064 != 85764063 diff = 1)! 2010-Oct-09 02:01:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764064 != 85764063 diff = 1)! 2010-Oct-09 02:01:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764064 != 85764063 diff = 1)! 2010-Oct-09 02:01:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764064 != 85764063 diff = 1)! 2010-Oct-09 02:01:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764308 != 85764307 diff = 1)! 2010-Oct-09 02:01:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764308 != 85764307 diff = 1)! 2010-Oct-09 02:01:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764308 != 85764307 diff = 1)! 2010-Oct-09 02:01:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764308 != 85764307 diff = 1)! 2010-Oct-09 02:01:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804188 != 85804187 diff = 1)! 2010-Oct-09 02:02:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85785795 != 85785794 diff = 1)! 2010-Oct-09 02:02:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85785795 != 85785794 diff = 1)! 2010-Oct-09 02:02:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85785795 != 85785794 diff = 1)! 2010-Oct-09 02:02:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85785795 != 85785794 diff = 1)! 2010-Oct-09 02:02:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85785795 != 85785794 diff = 1)! 2010-Oct-09 02:02:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85785795 != 85785794 diff = 1)! 2010-Oct-09 02:02:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764098 != 85764099 diff = 1)! 2010-Oct-09 02:02:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804203 != 85804204 diff = 1)! 2010-Oct-09 02:02:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764064 != 85764063 diff = 1)! 2010-Oct-09 02:03:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85782220 != 85782219 diff = 1)! 2010-Oct-09 02:03:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85782220 != 85782219 diff = 1)! 2010-Oct-09 02:03:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85782220 != 85782219 diff = 1)! 2010-Oct-09 02:03:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85782220 != 85782219 diff = 1)! 2010-Oct-09 02:03:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85782220 != 85782219 diff = 1)! 2010-Oct-09 02:03:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85782220 != 85782219 diff = 1)! 2010-Oct-09 02:03:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85782220 != 85782219 diff = 1)! 2010-Oct-09 02:03:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85782220 != 85782219 diff = 1)! 2010-Oct-09 02:03:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764092 != 85764091 diff = 1)! 2010-Oct-09 02:03:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764092 != 85764091 diff = 1)! 2010-Oct-09 02:03:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764092 != 85764091 diff = 1)! 2010-Oct-09 02:03:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764092 != 85764091 diff = 1)! 2010-Oct-09 02:03:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764092 != 85764091 diff = 1)! 2010-Oct-09 02:03:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764092 != 85764091 diff = 1)! 2010-Oct-09 02:03:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764092 != 85764091 diff = 1)! 2010-Oct-09 02:03:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764064 != 85764063 diff = 1)! 2010-Oct-09 02:03:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804186 != 85804185 diff = 1)! 2010-Oct-09 02:04:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804184 != 85804183 diff = 1)! 2010-Oct-09 02:04:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804190 != 85804189 diff = 1)! 2010-Oct-09 02:04:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804190 != 85804189 diff = 1)! 2010-Oct-09 02:04:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804190 != 85804189 diff = 1)! 2010-Oct-09 02:04:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804190 != 85804189 diff = 1)! 2010-Oct-09 02:04:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804190 != 85804189 diff = 1)! 2010-Oct-09 02:04:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804190 != 85804189 diff = 1)! 2010-Oct-09 02:04:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804190 != 85804189 diff = 1)! 2010-Oct-09 02:04:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764083 != 85764084 diff = 1)! 2010-Oct-09 02:04:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764098 != 85764097 diff = 1)! 2010-Oct-09 02:04:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764098 != 85764097 diff = 1)! 2010-Oct-09 02:04:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764098 != 85764097 diff = 1)! 2010-Oct-09 02:04:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764098 != 85764097 diff = 1)! 2010-Oct-09 02:04:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764098 != 85764097 diff = 1)! 2010-Oct-09 02:04:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804168 != 85804167 diff = 1)! 2010-Oct-09 02:05:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85795254 != 85795253 diff = 1)! 2010-Oct-09 02:05:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85778963 != 85778964 diff = 1)! 2010-Oct-09 02:05:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85778963 != 85778964 diff = 1)! 2010-Oct-09 02:05:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804178 != 85804177 diff = 1)! 2010-Oct-09 02:05:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804178 != 85804177 diff = 1)! 2010-Oct-09 02:05:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804178 != 85804177 diff = 1)! 2010-Oct-09 02:05:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804178 != 85804177 diff = 1)! 2010-Oct-09 02:05:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804178 != 85804177 diff = 1)! 2010-Oct-09 02:05:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804178 != 85804177 diff = 1)! 2010-Oct-09 02:05:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804178 != 85804177 diff = 1)! 2010-Oct-09 02:05:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804186 != 85804185 diff = 1)! 2010-Oct-09 02:05:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804186 != 85804185 diff = 1)! 2010-Oct-09 02:05:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804186 != 85804185 diff = 1)! 2010-Oct-09 02:05:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804186 != 85804185 diff = 1)! 2010-Oct-09 02:05:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804186 != 85804185 diff = 1)! 2010-Oct-09 02:05:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804186 != 85804185 diff = 1)! 2010-Oct-09 02:05:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804186 != 85804185 diff = 1)! 2010-Oct-09 02:05:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-09 02:05:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-09 02:05:42 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2010-Oct-09 02:05:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-09 02:05:42 LOG5 end_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2010-Oct-09 02:05:42 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2010-Oct-09 02:05:42 LOG2 onoff_wapp: Parameters: RA-offset: -90.707100000000253 arcminutes wait: 60 secs 2010-Oct-09 02:05:42 LOG4 track_offsets: Calling 'track_offsets -90.707100000000253 0.0 main small' 2010-Oct-09 02:05:42 START begin_task: Starting task 'sending telescope offsets' 2010-Oct-09 02:05:42 LOG5 begin_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2010-Oct-09 02:05:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2010-Oct-09 02:05:42 INFO2 track_offsets: Starting to send new offsets 2010-Oct-09 02:05:42 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023647+263135" 2010-Oct-09 02:05:42 LOG3 vw_send: To DATATAKING: pnt tr 23646.740000 263135.090000 -CJ -o -UD -1.51179 0.0 -CH 2010-Oct-09 02:05:42 STOP finish_task: Finishing task 'sending telescope offsets' 2010-Oct-09 02:05:42 LOG5 finish_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2010-Oct-09 02:05:42 INFO2 finish_task: DONE finished sending: telescope offsets 2010-Oct-09 02:05:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 02:05:42 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2010-Oct-09 02:05:42 LOG5 end_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2010-Oct-09 02:05:42 INFO2 lstwait: Waiting for 59.8 secs from LST 02:49:42 to LST 02:50:42 ... 2010-Oct-09 02:05:42 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836175999999789 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Oct-09 02:05:42 START begin_task: Starting task 'waiting on wait on LST' 2010-Oct-09 02:05:42 LOG5 begin_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2010-Oct-09 02:05:42 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023647+263135" 2010-Oct-09 02:05:42 LOG4 got_cormsg: From DATATAKING: pnt tr 23646.740000 263135.090000 -CJ -o -UD -1.51179 0.0 -CH 2010-Oct-09 02:05:42 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-09 02:06:18 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'j023647+263135' (after 36 seconds) 2010-Oct-09 02:06:18 LOG3 wait_and_tell_when_on_source: The telescope arrived at source with 24 seconds to spare (36 < 60 seconds) 2010-Oct-09 02:06:42 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-Oct-09 02:06:42 LOG5 end_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2010-Oct-09 02:06:42 LOG4 lstwait: Finished waiting 0.16 seconds late 2010-Oct-09 02:06:42 INFO3 lstwait: Finished waiting 2010-Oct-09 02:06:42 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Oct-09 02:06:42 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF stat_onoff_off {OFF scan}' 2010-Oct-09 02:06:42 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-09 02:06:42 LOG5 begin_task: Level: (2) ID = <10169> Status = 0 0 0 0 ok 2010-Oct-09 02:06:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for OFF scan ...} 2010-Oct-09 02:06:42 INFO2 take_data: Starting WAPP 300-second scan: 28200018 2010-Oct-09 02:06:43 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-09 02:06:43 LOG5 begin_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2010-Oct-09 02:06:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-09 02:06:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2010-Oct-09 02:06:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22004.00 2010-Oct-09 02:06:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11417.615844 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-09 02:06:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1417.615844 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:06:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1417.615844 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:06:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1417.615844 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:06:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1417.615844 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:06:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804200 != 85804199 diff = 1)! 2010-Oct-09 02:06:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804200 != 85804199 diff = 1)! 2010-Oct-09 02:06:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804200 != 85804199 diff = 1)! 2010-Oct-09 02:06:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804200 != 85804199 diff = 1)! 2010-Oct-09 02:06:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804200 != 85804199 diff = 1)! 2010-Oct-09 02:06:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804200 != 85804199 diff = 1)! 2010-Oct-09 02:06:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85788322 != 85788321 diff = 1)! 2010-Oct-09 02:06:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85788322 != 85788321 diff = 1)! 2010-Oct-09 02:06:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85788322 != 85788321 diff = 1)! 2010-Oct-09 02:06:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85788322 != 85788321 diff = 1)! 2010-Oct-09 02:06:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85788322 != 85788321 diff = 1)! 2010-Oct-09 02:06:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85788322 != 85788321 diff = 1)! 2010-Oct-09 02:06:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85788322 != 85788321 diff = 1)! 2010-Oct-09 02:07:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764045 != 85764046 diff = 1)! 2010-Oct-09 02:08:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804172 != 85804171 diff = 1)! 2010-Oct-09 02:09:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85785568 != 85785567 diff = 1)! 2010-Oct-09 02:09:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85785568 != 85785567 diff = 1)! 2010-Oct-09 02:09:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85785568 != 85785567 diff = 1)! 2010-Oct-09 02:09:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804178 != 85804177 diff = 1)! 2010-Oct-09 02:09:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804178 != 85804177 diff = 1)! 2010-Oct-09 02:09:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804178 != 85804177 diff = 1)! 2010-Oct-09 02:09:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804178 != 85804177 diff = 1)! 2010-Oct-09 02:09:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804178 != 85804177 diff = 1)! 2010-Oct-09 02:09:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804178 != 85804177 diff = 1)! 2010-Oct-09 02:09:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764074 != 85764073 diff = 1)! 2010-Oct-09 02:09:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85790848 != 85790847 diff = 1)! 2010-Oct-09 02:09:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85790848 != 85790847 diff = 1)! 2010-Oct-09 02:09:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85790848 != 85790847 diff = 1)! 2010-Oct-09 02:09:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85790848 != 85790847 diff = 1)! 2010-Oct-09 02:09:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764094 != 85764093 diff = 1)! 2010-Oct-09 02:10:04 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 02:10:04.302 (seconds: 7804.302)!} 2010-Oct-09 02:10:04 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 02:10:04.302 (seconds: 7804.302)! 2010-Oct-09 02:10:05 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 7803.0 to 7804.0! 2010-Oct-09 02:10:06 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (7803.0 - 7805.0)! 2010-Oct-09 02:10:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804181 != 85804182 diff = 1)! 2010-Oct-09 02:10:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804181 != 85804182 diff = 1)! 2010-Oct-09 02:10:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804181 != 85804182 diff = 1)! 2010-Oct-09 02:10:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85804181 != 85804182 diff = 1)! 2010-Oct-09 02:10:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804181 != 85804182 diff = 1)! 2010-Oct-09 02:10:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85804181 != 85804182 diff = 1)! 2010-Oct-09 02:10:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804181 != 85804182 diff = 1)! 2010-Oct-09 02:10:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764078 != 85764077 diff = 1)! 2010-Oct-09 02:10:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764078 != 85764077 diff = 1)! 2010-Oct-09 02:10:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764067 != 85764066 diff = 1)! 2010-Oct-09 02:11:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764066 != 85764065 diff = 1)! 2010-Oct-09 02:11:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764066 != 85764065 diff = 1)! 2010-Oct-09 02:11:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764066 != 85764065 diff = 1)! 2010-Oct-09 02:11:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764066 != 85764065 diff = 1)! 2010-Oct-09 02:11:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764066 != 85764065 diff = 1)! 2010-Oct-09 02:11:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764066 != 85764065 diff = 1)! 2010-Oct-09 02:11:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804174 != 85804173 diff = 1)! 2010-Oct-09 02:11:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804174 != 85804173 diff = 1)! 2010-Oct-09 02:11:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804174 != 85804173 diff = 1)! 2010-Oct-09 02:11:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804174 != 85804173 diff = 1)! 2010-Oct-09 02:11:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804174 != 85804173 diff = 1)! 2010-Oct-09 02:11:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804174 != 85804173 diff = 1)! 2010-Oct-09 02:11:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804174 != 85804173 diff = 1)! 2010-Oct-09 02:11:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804174 != 85804173 diff = 1)! 2010-Oct-09 02:11:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-09 02:11:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-09 02:11:44 LOG5 end_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2010-Oct-09 02:11:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-09 02:11:44 LOG5 end_task: Level: (2) ID = <10169> Status = 0 0 0 0 ok 2010-Oct-09 02:11:44 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2010-Oct-09 02:11:44 START begin_task: Starting task 'WAPP calibration' 2010-Oct-09 02:11:44 LOG5 begin_task: Level: (2) ID = <10171> Status = 0 0 0 0 ok 2010-Oct-09 02:11:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Oct-09 02:11:44 START begin_task: Starting task 'selecting calibration type' 2010-Oct-09 02:11:44 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2010-Oct-09 02:11:44 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-09 02:11:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-09 02:11:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 02:11:44 START begin_task: Starting task 'waiting on setcal' 2010-Oct-09 02:11:44 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2010-Oct-09 02:11:44 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-09 02:11:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 02:11:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 02:11:44 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 02:11:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-09 02:11:44 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2010-Oct-09 02:11:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-09 02:11:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-09 02:11:44 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2010-Oct-09 02:11:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Oct-09 02:11:44 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Oct-09 02:11:44 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Oct-09 02:11:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-09 02:11:44 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2010-Oct-09 02:11:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 02:11:44 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-09 02:11:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Oct-09 02:11:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-09 02:11:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-09 02:11:44 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2010-Oct-09 02:11:45 LOG4 take_data: Calling 'take_data 10 10 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Oct-09 02:11:45 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-09 02:11:45 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2010-Oct-09 02:11:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Oct-09 02:11:45 INFO2 take_data: Starting WAPP 10-second scan: 28200019 2010-Oct-09 02:11:45 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-09 02:11:45 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2010-Oct-09 02:11:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-09 02:11:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Oct-09 02:11:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22306.00 2010-Oct-09 02:11:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11417.615844 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-09 02:11:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1417.615844 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:11:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1417.615844 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:11:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1417.615844 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:11:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1417.615844 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:11:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-09 02:11:56 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-09 02:11:56 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2010-Oct-09 02:11:56 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-09 02:11:56 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2010-Oct-09 02:11:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Oct-09 02:11:56 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Oct-09 02:11:56 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Oct-09 02:11:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-09 02:11:56 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2010-Oct-09 02:11:56 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-09 02:11:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Oct-09 02:11:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-09 02:11:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-09 02:11:56 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2010-Oct-09 02:11:56 LOG4 take_data: Calling 'take_data 10 10 CAL OFF stat_cal_off {CAL-OFF spectra}' 2010-Oct-09 02:11:56 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-09 02:11:56 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2010-Oct-09 02:11:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2010-Oct-09 02:11:56 INFO2 take_data: Starting WAPP 10-second scan: 28200020 2010-Oct-09 02:11:57 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-09 02:11:57 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2010-Oct-09 02:11:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-09 02:11:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2010-Oct-09 02:11:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22318.00 2010-Oct-09 02:12:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11417.615844 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-09 02:12:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1417.615844 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:12:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1417.615844 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:12:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1417.615844 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:12:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1417.615844 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:12:08 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2010-Oct-09 02:12:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-09 02:12:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-09 02:12:08 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2010-Oct-09 02:12:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-09 02:12:08 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2010-Oct-09 02:12:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-09 02:12:08 STOP finish_task: Finishing task 'WAPP calibration' 2010-Oct-09 02:12:08 LOG5 finish_task: Level: (2) ID = <10171> Status = 0 0 0 0 ok 2010-Oct-09 02:12:08 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Oct-09 02:12:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 02:12:08 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Oct-09 02:12:08 LOG5 end_task: Level: (2) ID = <10171> Status = 0 0 0 0 ok 2010-Oct-09 02:12:08 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-09 02:12:08 LOG5 begin_task: Level: (2) ID = <10180> Status = 0 0 0 0 ok 2010-Oct-09 02:12:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-09 02:12:08 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-09 02:12:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023647+263135" 2010-Oct-09 02:12:08 LOG3 vw_send: To DATATAKING: pnt tr 23646.740000 263135.090000 -CJ 2010-Oct-09 02:12:08 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-09 02:12:08 LOG5 finish_task: Level: (2) ID = <10180> Status = 0 0 0 0 ok 2010-Oct-09 02:12:08 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-09 02:12:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 02:12:08 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-09 02:12:08 LOG5 end_task: Level: (2) ID = <10180> Status = 0 0 0 0 ok 2010-Oct-09 02:12:08 STOP finish_task: Finishing task 'standard on/off' 2010-Oct-09 02:12:08 LOG5 finish_task: Level: (1) ID = <10150> Status = 0 0 0 0 ok 2010-Oct-09 02:12:08 DONE finish_task: DONE finished pattern: standard on/off 2010-Oct-09 02:12:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-09 02:12:09 END end_task: Finishing task 'standard on/off' with status 'OK' 2010-Oct-09 02:12:09 LOG5 end_task: Level: (1) ID = <10150> Status = 0 0 0 0 ok 2010-Oct-09 02:12:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023647+263135" 2010-Oct-09 02:12:09 LOG4 got_cormsg: From DATATAKING: pnt tr 23646.740000 263135.090000 -CJ 2010-Oct-09 02:12:09 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-09 02:12:20 COMMAND CIMA-send_to_exec: Sending command to point to a source 2010-Oct-09 02:12:20 LOG4 exec_msg: From OBSERVER: track_new_source j023515+260623 023514.61 260623.19 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 10623 Topocentric velocity(optical) 0 0 0.0 0.0 0 2010-Oct-09 02:12:20 LOG1 track_new_source: Calling 'track_new_source j023515+260623 023514.61 260623.19 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 10623 Topocentric velocity(optical) 0 0 0.0 0.0 0' 2010-Oct-09 02:12:20 BEGIN begin_task: Starting task 'selecting new source' 2010-Oct-09 02:12:20 LOG5 begin_task: Level: (1) ID = <10181> Status = 0 0 0 0 ok 2010-Oct-09 02:12:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {j023515+260623} INFO {Selecting source 'j023515+260623' ...} 2010-Oct-09 02:12:21 LOG3 track_source: Calling 'track_source j023515+260623 023514.61 260623.19 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 10623 Topocentric velocity(optical)' 2010-Oct-09 02:12:21 START begin_task: Starting task 'sending tracking commands' 2010-Oct-09 02:12:21 LOG5 begin_task: Level: (2) ID = <10182> Status = 0 0 0 0 ok 2010-Oct-09 02:12:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {j023515+260623} INFO {Slewing to source 'j023515+260623' ...} 2010-Oct-09 02:12:21 INFO1 track_source: Starting to track j023515+260623 2010-Oct-09 02:12:21 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023515+260623" 2010-Oct-09 02:12:21 LOG3 vw_send: To DATATAKING: set ra 023514.61 2010-Oct-09 02:12:21 LOG3 vw_send: To DATATAKING: set dec 260623.19 2010-Oct-09 02:12:21 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Oct-09 02:12:21 LOG3 vw_send: To DATATAKING: pnt tr 023514.61 260623.19 -CJ 2010-Oct-09 02:12:21 LOG3 vw_send: To DATATAKING: dopsetvel 10623 topo 2010-Oct-09 02:12:21 STOP finish_task: Finishing task 'sending tracking commands' 2010-Oct-09 02:12:21 LOG5 finish_task: Level: (2) ID = <10182> Status = 0 0 0 0 ok 2010-Oct-09 02:12:21 INFO2 finish_task: DONE finished sending: tracking commands 2010-Oct-09 02:12:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 02:12:21 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Oct-09 02:12:21 LOG5 end_task: Level: (2) ID = <10182> Status = 0 0 0 0 ok 2010-Oct-09 02:12:21 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2010-Oct-09 02:12:21 START begin_task: Starting task 'applying pointing corrections' 2010-Oct-09 02:12:21 LOG5 begin_task: Level: (2) ID = <10183> Status = 0 0 0 0 ok 2010-Oct-09 02:12:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2010-Oct-09 02:12:21 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-09 02:12:21 STOP finish_task: Finishing task 'applying pointing corrections' 2010-Oct-09 02:12:21 LOG5 finish_task: Level: (2) ID = <10183> Status = 0 0 0 0 ok 2010-Oct-09 02:12:21 INFO2 finish_task: DONE finished applying: pointing corrections 2010-Oct-09 02:12:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 02:12:21 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2010-Oct-09 02:12:21 LOG5 end_task: Level: (2) ID = <10183> Status = 0 0 0 0 ok 2010-Oct-09 02:12:21 STOP finish_task: Finishing task 'selecting new source' 2010-Oct-09 02:12:21 LOG5 finish_task: Level: (1) ID = <10181> Status = 0 0 0 0 ok 2010-Oct-09 02:12:21 DONE finish_task: DONE finished selecting: new source 2010-Oct-09 02:12:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-09 02:12:21 END end_task: Finishing task 'selecting new source' with status 'OK' 2010-Oct-09 02:12:21 LOG5 end_task: Level: (1) ID = <10181> Status = 0 0 0 0 ok 2010-Oct-09 02:12:21 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023515+260623" 2010-Oct-09 02:12:21 LOG4 got_cormsg: From DATATAKING: set ra 023514.61 2010-Oct-09 02:12:21 LOG4 got_cormsg: From DATATAKING: vw% 023514.61 2010-Oct-09 02:12:21 LOG4 got_cormsg: From DATATAKING: 2010-Oct-09 02:12:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 02:12:21 LOG4 got_cormsg: From DATATAKING: set dec 260623.19 2010-Oct-09 02:12:21 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Oct-09 02:12:21 LOG4 got_cormsg: From DATATAKING: pnt tr 023514.61 260623.19 -CJ 2010-Oct-09 02:12:21 LOG4 got_cormsg: From DATATAKING: dopsetvel 10623 topo 2010-Oct-09 02:12:21 LOG4 got_cormsg: From DATATAKING: 260623.19 2010-Oct-09 02:12:21 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2010-Oct-09 02:12:21 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-09 02:12:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 02:12:23 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2010-Oct-09 02:12:23 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 off lcorcal each first one 2010-Oct-09 02:12:23 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 off lcorcal each first one' 2010-Oct-09 02:12:23 BEGIN begin_task: Starting task 'standard on/off' 2010-Oct-09 02:12:23 LOG5 begin_task: Level: (1) ID = <10184> Status = 0 0 0 0 ok 2010-Oct-09 02:12:23 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'j023515+260623' 2010-Oct-09 02:12:23 INFO1 onoff_wapp: Starting pattern: Standard on/off 2010-Oct-09 02:12:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2010-Oct-09 02:12:23 START begin_task: Starting task 'waiting on telescope' 2010-Oct-09 02:12:23 LOG5 begin_task: Level: (2) ID = <10185> Status = 0 0 0 0 ok 2010-Oct-09 02:12:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-09 02:12:23 LOG3 waittrk: Start waittrk 5 2010-Oct-09 02:12:23 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-09 02:12:23 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2010-Oct-09 02:12:28 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-09 02:12:28 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2010-Oct-09 02:12:28 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-09 02:12:28 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2010-Oct-09 02:12:50 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-09 02:12:50 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2010-Oct-09 02:12:50 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-09 02:12:50 INFO2 waittrk: Now tracking j023515+260623 2010-Oct-09 02:12:50 LOG4 waittrk: Current telescope position: Az = 148.85 ZA = 9.18 2010-Oct-09 02:12:50 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-09 02:12:50 LOG5 finish_task: Level: (2) ID = <10185> Status = 0 0 0 0 ok 2010-Oct-09 02:12:50 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-09 02:12:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 02:12:51 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-09 02:12:51 LOG5 end_task: Level: (2) ID = <10185> Status = 0 0 0 0 ok 2010-Oct-09 02:12:51 START begin_task: Starting task 'selecting calibration type' 2010-Oct-09 02:12:51 LOG5 begin_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2010-Oct-09 02:12:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-09 02:12:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-09 02:12:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 02:12:51 START begin_task: Starting task 'waiting on setcal' 2010-Oct-09 02:12:51 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2010-Oct-09 02:12:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-09 02:12:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 02:12:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 02:12:51 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 02:12:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-09 02:12:51 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2010-Oct-09 02:12:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-09 02:12:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-09 02:12:51 LOG5 end_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2010-Oct-09 02:12:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2010-Oct-09 02:12:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2010-Oct-09 02:12:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2010-Oct-09 02:12:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2010-Oct-09 02:12:51 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2010-Oct-09 02:12:51 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2010-Oct-09 02:12:51 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-09 02:12:51 LOG5 begin_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2010-Oct-09 02:12:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-09 02:12:51 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-09 02:12:51 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023515+260623" 2010-Oct-09 02:12:51 LOG3 vw_send: To DATATAKING: pnt tr 23514.610000 260623.190000 -CJ 2010-Oct-09 02:12:51 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-09 02:12:51 LOG5 finish_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2010-Oct-09 02:12:51 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-09 02:12:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 02:12:51 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-09 02:12:51 LOG5 end_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2010-Oct-09 02:12:51 START begin_task: Starting task 'waiting on telescope' 2010-Oct-09 02:12:51 LOG5 begin_task: Level: (2) ID = <10191> Status = 0 0 0 0 ok 2010-Oct-09 02:12:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-09 02:12:51 LOG3 waittrk: Start waittrk 5 2010-Oct-09 02:12:51 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-09 02:12:51 LOG5 begin_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2010-Oct-09 02:12:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2010-Oct-09 02:12:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 02:12:51 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023515+260623" 2010-Oct-09 02:12:51 LOG4 got_cormsg: From DATATAKING: pnt tr 23514.610000 260623.190000 -CJ 2010-Oct-09 02:12:51 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-09 02:12:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20101009.a2048.0005.fits 2010-Oct-09 02:12:52 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20101009.a2048.0005.fits} 2010-Oct-09 02:12:56 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-09 02:12:56 LOG5 end_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2010-Oct-09 02:12:56 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-09 02:12:56 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2010-Oct-09 02:12:58 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-09 02:12:58 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2010-Oct-09 02:12:58 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-09 02:12:58 INFO2 waittrk: Now tracking j023515+260623 2010-Oct-09 02:12:58 LOG4 waittrk: Current telescope position: Az = 148.68 ZA = 9.20 2010-Oct-09 02:12:58 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-09 02:12:58 LOG5 finish_task: Level: (2) ID = <10191> Status = 0 0 0 0 ok 2010-Oct-09 02:12:58 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-09 02:12:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 02:12:59 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-09 02:12:59 LOG5 end_task: Level: (2) ID = <10191> Status = 0 0 0 0 ok 2010-Oct-09 02:12:59 LOG5 antvel: Calling 'antvel 23514.610000 260623.190000 J Topocentric 0' 2010-Oct-09 02:12:59 LOG2 antvel: Precessing RA = 02:35:14.6 Dec = +26:06:23.2 Epoch = 2010.77233 J 2010-Oct-09 02:12:59 LOG2 antvel: Computed apparent RA = 02:35:54.6 Dec = +26:09:21.3 2010-Oct-09 02:12:59 LOG2 antvel: Parameters to Doppler: Topocentric 22378 2010 282 0.0 2010-Oct-09 02:12:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Oct-09 02:12:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=10623.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-Oct-09 02:12:59 INFO4 dopset_gen: New sky frequencies: 1371.796799 1371.796799 1371.796799 1371.796799 1371.796799 1371.796799 1371.796799 1371.796799 1371.796799 2010-Oct-09 02:12:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1371.796799 sky0=1371.796799 sky1=1371.796799 sky2=1371.796799 sky3=1371.796799 sky4=1371.796799 sky5=1371.796799 sky6=1371.796799 sky7=1371.796799 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2010-Oct-09 02:12:59 LOG2 dopset_gen: Result from 'sky2syn': 11371.796799 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2010-Oct-09 02:12:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11371796799.0} 2010-Oct-09 02:12:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-09 02:12:59 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-09 02:12:59 LOG5 begin_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2010-Oct-09 02:12:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Oct-09 02:12:59 INFO2 adjust_power: Starting to adjust WAPP power 2010-Oct-09 02:12:59 LOG3 vw_send: To DATATAKING: adjpwrif1 2010-Oct-09 02:12:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2010-Oct-09 02:12:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 02:12:59 START begin_task: Starting task 'waiting on adjpwrif1' 2010-Oct-09 02:12:59 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-Oct-09 02:12:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11371796799.0} 2010-Oct-09 02:12:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-09 02:12:59 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2010-Oct-09 02:12:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 02:12:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 02:12:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 02:12:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 02:12:59 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 02:12:59 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2010-Oct-09 02:12:59 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-Oct-09 02:12:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2010-Oct-09 02:12:59 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Oct-09 02:12:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Oct-09 02:12:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 02:12:59 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Oct-09 02:12:59 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2010-Oct-09 02:12:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 02:12:59 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Oct-09 02:12:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 02:13:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 02:13:02 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 02:13:02 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Oct-09 02:13:02 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2010-Oct-09 02:13:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Oct-09 02:13:02 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-09 02:13:02 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2010-Oct-09 02:13:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Oct-09 02:13:02 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2010-Oct-09 02:13:02 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2010-Oct-09 02:13:02 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2010-Oct-09 02:13:02 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2010-Oct-09 02:13:02 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Oct-09 02:13:02 LOG5 begin_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2010-Oct-09 02:13:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 02:13:02 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 12 8 dB 2010-Oct-09 02:13:02 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2010-Oct-09 02:13:02 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2010-Oct-09 02:13:02 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2010-Oct-09 02:13:02 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2010-Oct-09 02:13:02 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 14 0 dB 2010-Oct-09 02:13:02 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 2 12 dB 2010-Oct-09 02:13:03 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 3 15 dB 2010-Oct-09 02:13:03 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Oct-09 02:13:03 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Oct-09 02:13:03 LOG5 end_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2010-Oct-09 02:13:03 INFO2 wapp_adjpwr: WAPP power: 0.981 1.025 1.120 1.123 2010-Oct-09 02:13:03 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-09 02:13:03 LOG5 finish_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2010-Oct-09 02:13:03 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Oct-09 02:13:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 02:13:03 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-09 02:13:03 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2010-Oct-09 02:13:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-09 02:13:03 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-09 02:13:03 LOG5 finish_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2010-Oct-09 02:13:03 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Oct-09 02:13:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 02:13:03 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-09 02:13:03 LOG5 end_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2010-Oct-09 02:13:03 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON stat_onoff_on {ON scan}' 2010-Oct-09 02:13:03 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-09 02:13:03 LOG5 begin_task: Level: (2) ID = <10199> Status = 0 0 0 0 ok 2010-Oct-09 02:13:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for ON scan ...} 2010-Oct-09 02:13:03 INFO2 take_data: Starting WAPP 300-second scan: 28200021 2010-Oct-09 02:13:03 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-09 02:13:03 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2010-Oct-09 02:13:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-09 02:13:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2010-Oct-09 02:13:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22384.00 2010-Oct-09 02:13:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11371.796799 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-09 02:13:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1371.796799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:13:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1371.796799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:13:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1371.796799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:13:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1371.796799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:13:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804161 != 85804162 diff = 1)! 2010-Oct-09 02:13:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804161 != 85804162 diff = 1)! 2010-Oct-09 02:13:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804161 != 85804162 diff = 1)! 2010-Oct-09 02:13:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804161 != 85804162 diff = 1)! 2010-Oct-09 02:13:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804161 != 85804162 diff = 1)! 2010-Oct-09 02:13:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764075 != 85764076 diff = 1)! 2010-Oct-09 02:13:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764075 != 85764076 diff = 1)! 2010-Oct-09 02:13:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85764075 != 85764076 diff = 1)! 2010-Oct-09 02:13:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764075 != 85764076 diff = 1)! 2010-Oct-09 02:13:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85764075 != 85764076 diff = 1)! 2010-Oct-09 02:15:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764070 != 85764069 diff = 1)! 2010-Oct-09 02:15:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804162 != 85804161 diff = 1)! 2010-Oct-09 02:15:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804185 != 85804186 diff = 1)! 2010-Oct-09 02:15:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804185 != 85804186 diff = 1)! 2010-Oct-09 02:15:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804185 != 85804186 diff = 1)! 2010-Oct-09 02:15:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804185 != 85804186 diff = 1)! 2010-Oct-09 02:15:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804184 != 85804183 diff = 1)! 2010-Oct-09 02:15:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804184 != 85804183 diff = 1)! 2010-Oct-09 02:15:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804184 != 85804183 diff = 1)! 2010-Oct-09 02:16:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764098 != 85764097 diff = 1)! 2010-Oct-09 02:16:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764098 != 85764097 diff = 1)! 2010-Oct-09 02:16:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764098 != 85764097 diff = 1)! 2010-Oct-09 02:16:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764098 != 85764097 diff = 1)! 2010-Oct-09 02:16:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804194 != 85804193 diff = 1)! 2010-Oct-09 02:16:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804194 != 85804193 diff = 1)! 2010-Oct-09 02:16:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804194 != 85804193 diff = 1)! 2010-Oct-09 02:16:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804194 != 85804193 diff = 1)! 2010-Oct-09 02:16:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804194 != 85804193 diff = 1)! 2010-Oct-09 02:16:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804194 != 85804193 diff = 1)! 2010-Oct-09 02:16:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804194 != 85804193 diff = 1)! 2010-Oct-09 02:16:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804194 != 85804193 diff = 1)! 2010-Oct-09 02:16:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85794739 != 85794740 diff = 1)! 2010-Oct-09 02:16:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85794739 != 85794740 diff = 1)! 2010-Oct-09 02:16:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85794739 != 85794740 diff = 1)! 2010-Oct-09 02:16:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85794739 != 85794740 diff = 1)! 2010-Oct-09 02:16:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764058 != 85764057 diff = 1)! 2010-Oct-09 02:16:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764058 != 85764057 diff = 1)! 2010-Oct-09 02:17:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804176 != 85804175 diff = 1)! 2010-Oct-09 02:17:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804176 != 85804175 diff = 1)! 2010-Oct-09 02:17:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804176 != 85804175 diff = 1)! 2010-Oct-09 02:17:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804176 != 85804175 diff = 1)! 2010-Oct-09 02:17:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804176 != 85804175 diff = 1)! 2010-Oct-09 02:17:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804176 != 85804175 diff = 1)! 2010-Oct-09 02:17:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804176 != 85804175 diff = 1)! 2010-Oct-09 02:17:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804176 != 85804175 diff = 1)! 2010-Oct-09 02:17:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764095 != 85764096 diff = 1)! 2010-Oct-09 02:17:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85764095 != 85764096 diff = 1)! 2010-Oct-09 02:17:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764095 != 85764096 diff = 1)! 2010-Oct-09 02:17:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804172 != 85804171 diff = 1)! 2010-Oct-09 02:17:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804172 != 85804171 diff = 1)! 2010-Oct-09 02:17:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804172 != 85804171 diff = 1)! 2010-Oct-09 02:17:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804172 != 85804171 diff = 1)! 2010-Oct-09 02:17:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804172 != 85804171 diff = 1)! 2010-Oct-09 02:17:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804172 != 85804171 diff = 1)! 2010-Oct-09 02:17:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804172 != 85804171 diff = 1)! 2010-Oct-09 02:17:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804172 != 85804171 diff = 1)! 2010-Oct-09 02:17:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764074 != 85764073 diff = 1)! 2010-Oct-09 02:17:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764074 != 85764073 diff = 1)! 2010-Oct-09 02:17:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764074 != 85764073 diff = 1)! 2010-Oct-09 02:17:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764067 != 85764068 diff = 1)! 2010-Oct-09 02:17:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764067 != 85764068 diff = 1)! 2010-Oct-09 02:17:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85764067 != 85764068 diff = 1)! 2010-Oct-09 02:17:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764067 != 85764068 diff = 1)! 2010-Oct-09 02:17:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85764067 != 85764068 diff = 1)! 2010-Oct-09 02:17:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85764067 != 85764068 diff = 1)! 2010-Oct-09 02:17:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764075 != 85764074 diff = 1)! 2010-Oct-09 02:17:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764075 != 85764074 diff = 1)! 2010-Oct-09 02:17:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764075 != 85764074 diff = 1)! 2010-Oct-09 02:17:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764075 != 85764074 diff = 1)! 2010-Oct-09 02:18:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-09 02:18:04 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-09 02:18:04 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2010-Oct-09 02:18:04 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-09 02:18:04 LOG5 end_task: Level: (2) ID = <10199> Status = 0 0 0 0 ok 2010-Oct-09 02:18:04 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2010-Oct-09 02:18:04 LOG2 onoff_wapp: Parameters: RA-offset: -90.706199999999725 arcminutes wait: 60 secs 2010-Oct-09 02:18:04 LOG4 track_offsets: Calling 'track_offsets -90.706199999999725 0.0 main small' 2010-Oct-09 02:18:04 START begin_task: Starting task 'sending telescope offsets' 2010-Oct-09 02:18:04 LOG5 begin_task: Level: (2) ID = <10201> Status = 0 0 0 0 ok 2010-Oct-09 02:18:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2010-Oct-09 02:18:04 INFO2 track_offsets: Starting to send new offsets 2010-Oct-09 02:18:04 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023515+260623" 2010-Oct-09 02:18:04 LOG3 vw_send: To DATATAKING: pnt tr 23514.610000 260623.190000 -CJ -o -UD -1.51177 0.0 -CH 2010-Oct-09 02:18:04 STOP finish_task: Finishing task 'sending telescope offsets' 2010-Oct-09 02:18:04 LOG5 finish_task: Level: (2) ID = <10201> Status = 0 0 0 0 ok 2010-Oct-09 02:18:04 INFO2 finish_task: DONE finished sending: telescope offsets 2010-Oct-09 02:18:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 02:18:04 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2010-Oct-09 02:18:04 LOG5 end_task: Level: (2) ID = <10201> Status = 0 0 0 0 ok 2010-Oct-09 02:18:04 INFO2 lstwait: Waiting for 59.8 secs from LST 03:02:06 to LST 03:03:06 ... 2010-Oct-09 02:18:04 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836175999999789 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Oct-09 02:18:04 START begin_task: Starting task 'waiting on wait on LST' 2010-Oct-09 02:18:04 LOG5 begin_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2010-Oct-09 02:18:04 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023515+260623" 2010-Oct-09 02:18:04 LOG4 got_cormsg: From DATATAKING: pnt tr 23514.610000 260623.190000 -CJ -o -UD -1.51177 0.0 -CH 2010-Oct-09 02:18:04 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-09 02:18:35 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'j023515+260623' (after 31 seconds) 2010-Oct-09 02:18:35 LOG3 wait_and_tell_when_on_source: The telescope arrived at source with 29 seconds to spare (31 < 60 seconds) 2010-Oct-09 02:19:04 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-Oct-09 02:19:04 LOG5 end_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2010-Oct-09 02:19:04 LOG4 lstwait: Finished waiting 0.17 seconds late 2010-Oct-09 02:19:04 INFO3 lstwait: Finished waiting 2010-Oct-09 02:19:04 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Oct-09 02:19:04 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF stat_onoff_off {OFF scan}' 2010-Oct-09 02:19:04 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-09 02:19:04 LOG5 begin_task: Level: (2) ID = <10203> Status = 0 0 0 0 ok 2010-Oct-09 02:19:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for OFF scan ...} 2010-Oct-09 02:19:04 INFO2 take_data: Starting WAPP 300-second scan: 28200022 2010-Oct-09 02:19:05 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-09 02:19:05 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2010-Oct-09 02:19:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-09 02:19:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2010-Oct-09 02:19:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22746.00 2010-Oct-09 02:19:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11371.796799 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-09 02:19:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1371.796799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:19:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1371.796799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:19:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1371.796799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:19:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1371.796799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:19:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85964618 != 85964617 diff = 1)! 2010-Oct-09 02:19:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85964618 != 85964617 diff = 1)! 2010-Oct-09 02:19:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85964618 != 85964617 diff = 1)! 2010-Oct-09 02:19:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85964618 != 85964617 diff = 1)! 2010-Oct-09 02:19:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85964618 != 85964617 diff = 1)! 2010-Oct-09 02:19:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85964618 != 85964617 diff = 1)! 2010-Oct-09 02:19:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85786546 != 85786545 diff = 1)! 2010-Oct-09 02:20:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804176 != 85804175 diff = 1)! 2010-Oct-09 02:20:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804176 != 85804175 diff = 1)! 2010-Oct-09 02:20:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85765420 != 85765419 diff = 1)! 2010-Oct-09 02:20:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764085 != 85764086 diff = 1)! 2010-Oct-09 02:20:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764085 != 85764086 diff = 1)! 2010-Oct-09 02:20:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764085 != 85764086 diff = 1)! 2010-Oct-09 02:20:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85778648 != 85778647 diff = 1)! 2010-Oct-09 02:20:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85778648 != 85778647 diff = 1)! 2010-Oct-09 02:20:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764078 != 85764077 diff = 1)! 2010-Oct-09 02:20:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764078 != 85764077 diff = 1)! 2010-Oct-09 02:21:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804164 != 85804163 diff = 1)! 2010-Oct-09 02:21:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804164 != 85804163 diff = 1)! 2010-Oct-09 02:21:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804164 != 85804163 diff = 1)! 2010-Oct-09 02:21:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804164 != 85804163 diff = 1)! 2010-Oct-09 02:21:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804164 != 85804163 diff = 1)! 2010-Oct-09 02:21:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804164 != 85804163 diff = 1)! 2010-Oct-09 02:21:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804164 != 85804163 diff = 1)! 2010-Oct-09 02:21:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804164 != 85804163 diff = 1)! 2010-Oct-09 02:21:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764110 != 85764109 diff = 1)! 2010-Oct-09 02:21:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764110 != 85764109 diff = 1)! 2010-Oct-09 02:21:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86054672 != 86054671 diff = 1)! 2010-Oct-09 02:21:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86054672 != 86054671 diff = 1)! 2010-Oct-09 02:21:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86054672 != 86054671 diff = 1)! 2010-Oct-09 02:21:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86054672 != 86054671 diff = 1)! 2010-Oct-09 02:21:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (86054672 != 86054671 diff = 1)! 2010-Oct-09 02:21:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86054672 != 86054671 diff = 1)! 2010-Oct-09 02:21:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804168 != 85804167 diff = 1)! 2010-Oct-09 02:21:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804168 != 85804167 diff = 1)! 2010-Oct-09 02:21:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804168 != 85804167 diff = 1)! 2010-Oct-09 02:21:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804168 != 85804167 diff = 1)! 2010-Oct-09 02:21:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804168 != 85804167 diff = 1)! 2010-Oct-09 02:21:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804168 != 85804167 diff = 1)! 2010-Oct-09 02:21:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804168 != 85804167 diff = 1)! 2010-Oct-09 02:21:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804168 != 85804167 diff = 1)! 2010-Oct-09 02:21:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804159 != 85804160 diff = 1)! 2010-Oct-09 02:21:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804196 != 85804195 diff = 1)! 2010-Oct-09 02:22:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85775834 != 85775833 diff = 1)! 2010-Oct-09 02:22:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85776225 != 85776226 diff = 1)! 2010-Oct-09 02:22:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85776225 != 85776226 diff = 1)! 2010-Oct-09 02:22:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85776225 != 85776226 diff = 1)! 2010-Oct-09 02:22:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85776225 != 85776226 diff = 1)! 2010-Oct-09 02:22:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85776225 != 85776226 diff = 1)! 2010-Oct-09 02:22:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85776225 != 85776226 diff = 1)! 2010-Oct-09 02:22:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85776225 != 85776226 diff = 1)! 2010-Oct-09 02:22:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85776225 != 85776226 diff = 1)! 2010-Oct-09 02:22:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764062 != 85764061 diff = 1)! 2010-Oct-09 02:22:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764062 != 85764061 diff = 1)! 2010-Oct-09 02:22:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764062 != 85764061 diff = 1)! 2010-Oct-09 02:22:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764062 != 85764061 diff = 1)! 2010-Oct-09 02:22:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764062 != 85764061 diff = 1)! 2010-Oct-09 02:22:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764062 != 85764061 diff = 1)! 2010-Oct-09 02:22:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764062 != 85764061 diff = 1)! 2010-Oct-09 02:22:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764098 != 85764097 diff = 1)! 2010-Oct-09 02:22:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764095 != 85764094 diff = 1)! 2010-Oct-09 02:22:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764095 != 85764094 diff = 1)! 2010-Oct-09 02:22:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85776110 != 85776109 diff = 1)! 2010-Oct-09 02:22:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85776110 != 85776109 diff = 1)! 2010-Oct-09 02:22:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85776110 != 85776109 diff = 1)! 2010-Oct-09 02:22:55 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 55478.265891 to 55478.265903! 2010-Oct-09 02:22:56 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (55478.265891 - 55478.265914)! 2010-Oct-09 02:23:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804173 != 85804174 diff = 1)! 2010-Oct-09 02:23:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804173 != 85804174 diff = 1)! 2010-Oct-09 02:23:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85804173 != 85804174 diff = 1)! 2010-Oct-09 02:23:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804173 != 85804174 diff = 1)! 2010-Oct-09 02:23:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85804173 != 85804174 diff = 1)! 2010-Oct-09 02:23:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85804173 != 85804174 diff = 1)! 2010-Oct-09 02:23:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764090 != 85764089 diff = 1)! 2010-Oct-09 02:23:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764090 != 85764089 diff = 1)! 2010-Oct-09 02:23:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764090 != 85764089 diff = 1)! 2010-Oct-09 02:23:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764090 != 85764089 diff = 1)! 2010-Oct-09 02:23:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804160 != 85804159 diff = 1)! 2010-Oct-09 02:23:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764072 != 85764071 diff = 1)! 2010-Oct-09 02:23:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764072 != 85764071 diff = 1)! 2010-Oct-09 02:23:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764072 != 85764071 diff = 1)! 2010-Oct-09 02:23:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764072 != 85764071 diff = 1)! 2010-Oct-09 02:23:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764072 != 85764071 diff = 1)! 2010-Oct-09 02:23:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764072 != 85764071 diff = 1)! 2010-Oct-09 02:23:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764072 != 85764071 diff = 1)! 2010-Oct-09 02:24:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764062 != 85764061 diff = 1)! 2010-Oct-09 02:24:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-09 02:24:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-09 02:24:06 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2010-Oct-09 02:24:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-09 02:24:06 LOG5 end_task: Level: (2) ID = <10203> Status = 0 0 0 0 ok 2010-Oct-09 02:24:06 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2010-Oct-09 02:24:06 START begin_task: Starting task 'WAPP calibration' 2010-Oct-09 02:24:06 LOG5 begin_task: Level: (2) ID = <10205> Status = 0 0 0 0 ok 2010-Oct-09 02:24:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Oct-09 02:24:06 START begin_task: Starting task 'selecting calibration type' 2010-Oct-09 02:24:06 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2010-Oct-09 02:24:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-09 02:24:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-09 02:24:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 02:24:06 START begin_task: Starting task 'waiting on setcal' 2010-Oct-09 02:24:06 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2010-Oct-09 02:24:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-09 02:24:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-09 02:24:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 02:24:06 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-09 02:24:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-09 02:24:06 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2010-Oct-09 02:24:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-09 02:24:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-09 02:24:06 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2010-Oct-09 02:24:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Oct-09 02:24:06 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Oct-09 02:24:06 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Oct-09 02:24:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-09 02:24:06 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2010-Oct-09 02:24:06 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-09 02:24:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 02:24:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Oct-09 02:24:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-09 02:24:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-09 02:24:06 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2010-Oct-09 02:24:06 LOG4 take_data: Calling 'take_data 10 10 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Oct-09 02:24:06 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-09 02:24:06 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2010-Oct-09 02:24:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Oct-09 02:24:07 INFO2 take_data: Starting WAPP 10-second scan: 28200023 2010-Oct-09 02:24:07 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-09 02:24:07 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2010-Oct-09 02:24:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-09 02:24:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Oct-09 02:24:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23048.00 2010-Oct-09 02:24:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11371.796799 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-09 02:24:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1371.796799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:24:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1371.796799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:24:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1371.796799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:24:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1371.796799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:24:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-09 02:24:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-09 02:24:18 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2010-Oct-09 02:24:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-09 02:24:18 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2010-Oct-09 02:24:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Oct-09 02:24:18 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Oct-09 02:24:18 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Oct-09 02:24:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-09 02:24:18 LOG5 begin_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2010-Oct-09 02:24:18 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-09 02:24:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Oct-09 02:24:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-09 02:24:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-09 02:24:18 LOG5 end_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2010-Oct-09 02:24:18 LOG4 take_data: Calling 'take_data 10 10 CAL OFF stat_cal_off {CAL-OFF spectra}' 2010-Oct-09 02:24:18 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-09 02:24:18 LOG5 begin_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2010-Oct-09 02:24:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2010-Oct-09 02:24:18 INFO2 take_data: Starting WAPP 10-second scan: 28200024 2010-Oct-09 02:24:19 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-09 02:24:19 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2010-Oct-09 02:24:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-09 02:24:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2010-Oct-09 02:24:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23060.00 2010-Oct-09 02:24:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11371.796799 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-09 02:24:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1371.796799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:24:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1371.796799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:24:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1371.796799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:24:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1371.796799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-09 02:24:30 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2010-Oct-09 02:24:30 INFO1 WAPP=2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-09 02:24:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (858042221 != 858042220 diff = 1)! 2010-Oct-09 02:24:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-09 02:24:30 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2010-Oct-09 02:24:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-09 02:24:30 LOG5 end_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2010-Oct-09 02:24:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-09 02:24:30 STOP finish_task: Finishing task 'WAPP calibration' 2010-Oct-09 02:24:30 LOG5 finish_task: Level: (2) ID = <10205> Status = 0 0 0 0 ok 2010-Oct-09 02:24:30 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Oct-09 02:24:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 02:24:30 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Oct-09 02:24:30 LOG5 end_task: Level: (2) ID = <10205> Status = 0 0 0 0 ok 2010-Oct-09 02:24:30 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-09 02:24:30 LOG5 begin_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2010-Oct-09 02:24:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-09 02:24:30 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-09 02:24:30 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023515+260623" 2010-Oct-09 02:24:30 LOG3 vw_send: To DATATAKING: pnt tr 23514.610000 260623.190000 -CJ 2010-Oct-09 02:24:30 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-09 02:24:30 LOG5 finish_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2010-Oct-09 02:24:30 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-09 02:24:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-09 02:24:30 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-09 02:24:30 LOG5 end_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2010-Oct-09 02:24:30 STOP finish_task: Finishing task 'standard on/off' 2010-Oct-09 02:24:30 LOG5 finish_task: Level: (1) ID = <10184> Status = 0 0 0 0 ok 2010-Oct-09 02:24:30 DONE finish_task: DONE finished pattern: standard on/off 2010-Oct-09 02:24:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-09 02:24:31 END end_task: Finishing task 'standard on/off' with status 'OK' 2010-Oct-09 02:24:31 LOG5 end_task: Level: (1) ID = <10184> Status = 0 0 0 0 ok 2010-Oct-09 02:24:31 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023515+260623" 2010-Oct-09 02:24:31 INFO1 WAPP=1-start_spectra: DONE with spectral line observation 2010-Oct-09 02:24:31 LOG4 got_cormsg: From DATATAKING: pnt tr 23514.610000 260623.190000 -CJ 2010-Oct-09 02:24:31 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-09 02:25:04 ALERT CIMA-exit_cima: Exiting CIMA ... 2010-Oct-09 02:25:05 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2010-Oct-09 02:25:05 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2010-Oct-09 02:25:05 LOG3 vw_send: To DATATAKING: mvdata a2048 2010-Oct-09 02:25:05 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2010-Oct-09 02:25:05 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2010-Oct-09 02:25:05 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2010-Oct-09 02:25:05 NOTE CIMA-exit_cima: Cleaning up session ... 2010-Oct-09 02:25:05 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2010-Oct-09 02:25:05 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2010-Oct-09 02:25:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 02:25:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-09 02:25:07 LOG3 exec_msg: Closing socket