2010-Oct-08 01:01:21 BEGIN executive: CIMA executive starting ... 2010-Oct-08 01:01:22 NOTE executive: STARTING NEW CIMA SESSION 2010-Oct-08 01:01:22 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2010-Oct-08 01:01:22 INFO4 executive: This is an ON-LINE session 2010-Oct-08 01:01:22 INFO4 executive: This is a LOCAL session 2010-Oct-08 01:01:22 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2010-Oct-08 01:01:22 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'R Minchin' 2010-Oct-08 01:01:22 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20101008' 2010-Oct-08 01:01:22 LOG2 log_preferences: Currently applied preferences: 2010-Oct-08 01:01:22 LOG2 log_preferences: prefs(dailylog) = daily 2010-Oct-08 01:01:22 LOG2 log_preferences: prefs(offlinelog) = skip 2010-Oct-08 01:01:22 LOG2 log_preferences: prefs(datawindow) = ignore 2010-Oct-08 01:01:22 LOG2 log_preferences: prefs(limitwarning) = enabled 2010-Oct-08 01:01:22 LOG2 log_preferences: prefs(wappfailure) = abort 2010-Oct-08 01:01:22 LOG2 log_preferences: prefs(helpstyle) = stay-open 2010-Oct-08 01:01:22 LOG2 log_preferences: prefs(logcolours) = full 2010-Oct-08 01:01:22 LOG2 log_preferences: prefs(displaylevel) = INFO3 2010-Oct-08 01:01:22 LOG2 log_preferences: prefs(loglevel) = LOG5 2010-Oct-08 01:01:22 LOG2 log_preferences: prefs(displayformat) = short 2010-Oct-08 01:01:22 LOG2 log_preferences: prefs(logformat) = new 2010-Oct-08 01:01:22 LOG2 log_preferences: prefs(fontsize) = 4 2010-Oct-08 01:01:22 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2010-Oct-08 01:01:22 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2010-Oct-08 01:01:22 ALERT executive: CIMA executive ready 2010-Oct-08 01:01:24 LOG4 got_cormsg: From DATATAKING: vw% setup 2010-Oct-08 01:01:24 NOTE frontend: CIMA frontend ready 2010-Oct-08 01:01:28 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2010-Oct-08 01:01:28 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2010-Oct-08 01:01:28 LOG4 got_cormsg: From DATATAKING: vw% io 2010-Oct-08 01:01:28 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2010-Oct-08 01:01:28 LOG4 got_cormsg: From DATATAKING: 2010-Oct-08 01:01:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:01:28 LOG4 got_cormsg: From DATATAKING: tape stat 2010-Oct-08 01:01:28 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2010-Oct-08 01:01:28 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2010-Oct-08 01:01:28 LOG4 got_cormsg: From DATATAKING: vw% connectall 2010-Oct-08 01:01:28 LOG4 got_cormsg: From DATATAKING: 1 sb750 2368.5 2334.0 2357.0 2380.0 2403.0 2010-Oct-08 01:01:28 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2010-Oct-08 01:01:28 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2010-Oct-08 01:01:28 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2010-Oct-08 01:01:28 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2010-Oct-08 01:01:28 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2010-Oct-08 01:01:28 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2010-Oct-08 01:01:28 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2010-Oct-08 01:01:28 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2010-Oct-08 01:01:28 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2010-Oct-08 01:01:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:01:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:01:29 INFO1 CIMA-find_last_tsys: Last Tsys-values for 'L-Band Wide' is from 2010-Oct-07 15:39:25 for 'hcorcal': 31.2 K & 32.8 K 2010-Oct-08 01:01:29 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2010-Oct-08 01:01:29 LOG4 exec_msg: From OBSERVER: select_receiver lbw no no yes 2010-Oct-08 01:01:29 LOG1 select_receiver: Calling 'select_receiver lbw no no yes' 2010-Oct-08 01:01:29 BEGIN begin_task: Starting task 'selecting receiver L-Band Wide' 2010-Oct-08 01:01:29 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Oct-08 01:01:29 NOTE select_receiver: Starting to select receiver L-Band Wide 2010-Oct-08 01:01:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver L-Band Wide ...} 2010-Oct-08 01:01:29 LOG3 vw_send: To DATATAKING: setupall 5 1400.0 2010-Oct-08 01:01:29 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Oct-08 01:01:29 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Oct-08 01:01:29 STOP finish_task: Finishing task 'selecting receiver L-Band Wide' 2010-Oct-08 01:01:29 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Oct-08 01:01:29 DONE finish_task: DONE finished selecting: receiver L-Band Wide 2010-Oct-08 01:01:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-08 01:01:29 END end_task: Finishing task 'selecting receiver L-Band Wide' with status 'OK' 2010-Oct-08 01:01:29 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Oct-08 01:01:29 LOG4 got_cormsg: From DATATAKING: setupall 5 1400.0 2010-Oct-08 01:01:29 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Oct-08 01:01:43 LOG4 got_cormsg: From DATATAKING: waiting for turret position:285.79 2010-Oct-08 01:01:56 NOTE CIMA-load_config_file: Loading and applying configuration file 'ages_lbw_smart.conf' 2010-Oct-08 01:01:56 INFO1 CIMA-find_last_tsys: Last Tsys-values for 'L-Band Wide' is from 2010-Oct-07 15:39:25 for 'hcorcal': 31.2 K & 32.8 K 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "lbw" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "10GHz to 1500" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "275" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "275" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "275" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "275" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "1775.000000" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "1775.000000" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "1775.000000" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "1775.000000" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "1775.000000" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "1775.000000" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "1775.000000" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "1775.000000" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Oct-08 01:01:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "on" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "lbwpol lin" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "lbfb 7" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "F" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "5" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "7 5" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "4" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "11420.405752" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "0" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "0" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "F" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "0" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "1500" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "1500 1500 1500 1500 1500 1500 1500 1500" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "750" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "F" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "5" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "50" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "50" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "25" 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "25" 2010-Oct-08 01:01:58 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2010-Oct-08 01:01:58 LOG4 exec_msg: From OBSERVER: config_iflo 2010-Oct-08 01:01:58 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Oct-08 01:01:58 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Oct-08 01:01:58 INFO1 config_iflo: Starting to configure IF/LO path for L-Band Wide 2010-Oct-08 01:01:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Oct-08 01:01:58 INFO1 config_iflo: Selecting receiver L-Band Wide 2010-Oct-08 01:01:58 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver L-Band Wide} 2010-Oct-08 01:01:58 LOG1 select_receiver: Calling 'select_receiver lbw no no yes' 2010-Oct-08 01:01:58 START begin_task: Starting task 'selecting receiver L-Band Wide' 2010-Oct-08 01:01:58 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2010-Oct-08 01:01:58 NOTE select_receiver: Starting to select receiver L-Band Wide 2010-Oct-08 01:01:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver L-Band Wide ...} 2010-Oct-08 01:01:58 LOG3 vw_send: To DATATAKING: setupall 5 1400.0 2010-Oct-08 01:01:58 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Oct-08 01:01:58 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Oct-08 01:01:58 STOP finish_task: Finishing task 'selecting receiver L-Band Wide' 2010-Oct-08 01:01:58 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2010-Oct-08 01:01:58 INFO2 finish_task: DONE finished selecting: receiver L-Band Wide 2010-Oct-08 01:01:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:01:58 STOP end_task: Finishing task 'selecting receiver L-Band Wide' with status 'OK' 2010-Oct-08 01:01:58 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2010-Oct-08 01:01:58 START begin_task: Starting task 'waiting for receiver L-Band Wide' 2010-Oct-08 01:01:58 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Oct-08 01:01:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 22.5 BITMAP stat_alfa_rot INFO {Waiting on rotating floor} 2010-Oct-08 01:01:59 START begin_task: Starting task 'waiting on waiting for receiver rotation' 2010-Oct-08 01:01:59 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Oct-08 01:01:59 LOG4 got_cormsg: From DATATAKING: setupall 5 1400.0 2010-Oct-08 01:01:59 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Oct-08 01:02:14 LOG4 got_cormsg: From DATATAKING: settinng up if2 2010-Oct-08 01:02:14 LOG4 got_cormsg: From DATATAKING: setting up if1lo 2010-Oct-08 01:02:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:16 STOP end_task: Finishing task 'waiting on waiting for receiver rotation' with status 'OK' 2010-Oct-08 01:02:16 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Oct-08 01:02:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT 2010-Oct-08 01:02:16 STOP end_task: Finishing task 'waiting for receiver L-Band Wide' with status 'OK' 2010-Oct-08 01:02:16 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Oct-08 01:02:16 INFO1 config_iflo: Configuring rest of the IF/LO path 2010-Oct-08 01:02:16 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2010-Oct-08 01:02:16 LOG3 vw_send: To DATATAKING: lbwpol lin 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: lbfb 7 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if1 {if1_shcl F} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if1 {if1_rfnum 5} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 7 5} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 4} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11420405752.0} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if1 {if1_ac2sw 0} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if1 {if1_phbsig 0} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if1 {if1_hybrid F} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if1 {if1_phblo 0} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if1 {if1_750nb F} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 5} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq 1500} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 1500 1500 1500 1500 1500 1500 1500 1500} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if2 {if2_vlbainp 750} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2010-Oct-08 01:02:17 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2010-Oct-08 01:02:17 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2010-Oct-08 01:02:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Oct-08 01:02:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:02:17 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Oct-08 01:02:17 LOG5 begin_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: lbwpol lin 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: lbfb 7 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_shcl F} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfnum 5} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 7 5} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 4} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11420405752.0} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_ac2sw 0} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_phbsig 0} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_hybrid F} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_phblo 0} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_750nb F} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 5} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq 1500} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 1500 1500 1500 1500 1500 1500 1500 1500} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_vlbainp 750} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2010-Oct-08 01:02:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:02:28 LOG4 got_cormsg: From DATATAKING: settinng up if2 2010-Oct-08 01:02:28 LOG4 got_cormsg: From DATATAKING: setting up if1lo 2010-Oct-08 01:02:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:42 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 01:02:42 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Oct-08 01:02:42 LOG5 end_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2010-Oct-08 01:02:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Oct-08 01:02:42 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Oct-08 01:02:42 LOG5 finish_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Oct-08 01:02:42 DONE finish_task: DONE finished configuration: IF/LO path 2010-Oct-08 01:02:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-08 01:02:42 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Oct-08 01:02:42 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Oct-08 01:02:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Oct-08 01:02:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Oct-08 01:02:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Oct-08 01:02:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Oct-08 01:02:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "1 chan, 9-level, pol a" 2010-Oct-08 01:02:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "1 chan, 9-level, pol b" 2010-Oct-08 01:02:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "1 chan, 9-level, pol a" 2010-Oct-08 01:02:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "1 chan, 9-level, pol b" 2010-Oct-08 01:02:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "50" 2010-Oct-08 01:02:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "50" 2010-Oct-08 01:02:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "25" 2010-Oct-08 01:02:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "25" 2010-Oct-08 01:02:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Oct-08 01:02:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "0" 2010-Oct-08 01:02:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "0" 2010-Oct-08 01:02:43 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2010-Oct-08 01:02:43 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2010-Oct-08 01:02:43 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Oct-08 01:02:43 LOG5 begin_task: Level: (1) ID = <10007> Status = 0 0 0 0 ok 2010-Oct-08 01:02:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Oct-08 01:02:43 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Oct-08 01:02:43 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Oct-08 01:02:43 START begin_task: Starting task 'selecting calibration port' 2010-Oct-08 01:02:43 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2010-Oct-08 01:02:43 LOG3 vw_send: To DATATAKING: calport 3 2010-Oct-08 01:02:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Oct-08 01:02:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:02:43 START begin_task: Starting task 'waiting on calport' 2010-Oct-08 01:02:43 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2010-Oct-08 01:02:43 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Oct-08 01:02:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:02:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:43 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 01:02:43 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Oct-08 01:02:43 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2010-Oct-08 01:02:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Oct-08 01:02:43 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Oct-08 01:02:43 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2010-Oct-08 01:02:43 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Oct-08 01:02:43 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Oct-08 01:02:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-08 01:02:43 LOG5 begin_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2010-Oct-08 01:02:43 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-08 01:02:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:02:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Oct-08 01:02:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-08 01:02:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-08 01:02:43 LOG5 end_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2010-Oct-08 01:02:43 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Oct-08 01:02:43 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Oct-08 01:02:43 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Oct-08 01:02:43 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Oct-08 01:02:43 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Oct-08 01:02:44 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Oct-08 01:02:44 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Oct-08 01:02:44 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Oct-08 01:02:44 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2010-Oct-08 01:02:44 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2010-Oct-08 01:02:44 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2010-Oct-08 01:02:44 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2010-Oct-08 01:02:44 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Oct-08 01:02:44 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Oct-08 01:02:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-08 01:02:44 LOG5 begin_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2010-Oct-08 01:02:44 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-08 01:02:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Oct-08 01:02:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-08 01:02:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-08 01:02:44 LOG5 end_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2010-Oct-08 01:02:44 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2010-Oct-08 01:02:44 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2010-Oct-08 01:02:44 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2010-Oct-08 01:02:44 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2010-Oct-08 01:02:44 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Oct-08 01:02:44 LOG5 finish_task: Level: (1) ID = <10007> Status = 0 0 0 0 ok 2010-Oct-08 01:02:44 DONE finish_task: DONE finished configuring: the WAPPs in single board mode 2010-Oct-08 01:02:44 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-08 01:02:44 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Oct-08 01:02:44 LOG5 end_task: Level: (1) ID = <10007> Status = 0 0 0 0 ok 2010-Oct-08 01:02:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2010-Oct-08 01:02:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Oct-08 01:02:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Oct-08 01:02:44 NOTE CIMA-load_config_file: Configuration file 'ages_lbw_smart.conf' applied. 2010-Oct-08 01:02:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2010-Oct-08 01:02:45 NOTE WAPPDATA-new_file: New FITS file: wapp.20101008.a2048.0000.fits 2010-Oct-08 01:02:45 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20101008.a2048.0000.fits} 2010-Oct-08 01:04:27 COMMAND CIMA-send_to_exec: Sending command to point to a source 2010-Oct-08 01:04:27 LOG4 exec_msg: From OBSERVER: track_new_source j023052+252434 023051.81 252433.76 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 5188 Topocentric velocity(optical) 0 0 0.0 0.0 0 2010-Oct-08 01:04:27 LOG1 track_new_source: Calling 'track_new_source j023052+252434 023051.81 252433.76 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 5188 Topocentric velocity(optical) 0 0 0.0 0.0 0' 2010-Oct-08 01:04:27 BEGIN begin_task: Starting task 'selecting new source' 2010-Oct-08 01:04:27 LOG5 begin_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2010-Oct-08 01:04:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {j023052+252434} INFO {Selecting source 'j023052+252434' ...} 2010-Oct-08 01:04:27 LOG3 track_source: Calling 'track_source j023052+252434 023051.81 252433.76 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 5188 Topocentric velocity(optical)' 2010-Oct-08 01:04:27 START begin_task: Starting task 'sending tracking commands' 2010-Oct-08 01:04:27 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2010-Oct-08 01:04:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {j023052+252434} INFO {Slewing to source 'j023052+252434' ...} 2010-Oct-08 01:04:27 INFO1 track_source: Starting to track j023052+252434 2010-Oct-08 01:04:27 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023052+252434" 2010-Oct-08 01:04:27 LOG3 vw_send: To DATATAKING: set ra 023051.81 2010-Oct-08 01:04:27 LOG3 vw_send: To DATATAKING: set dec 252433.76 2010-Oct-08 01:04:27 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Oct-08 01:04:27 LOG3 vw_send: To DATATAKING: pnt tr 023051.81 252433.76 -CJ 2010-Oct-08 01:04:27 LOG3 vw_send: To DATATAKING: dopsetvel 5188 topo 2010-Oct-08 01:04:27 STOP finish_task: Finishing task 'sending tracking commands' 2010-Oct-08 01:04:27 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2010-Oct-08 01:04:27 INFO2 finish_task: DONE finished sending: tracking commands 2010-Oct-08 01:04:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:04:27 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Oct-08 01:04:27 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2010-Oct-08 01:04:27 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2010-Oct-08 01:04:27 START begin_task: Starting task 'applying pointing corrections' 2010-Oct-08 01:04:27 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-Oct-08 01:04:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2010-Oct-08 01:04:27 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-08 01:04:27 STOP finish_task: Finishing task 'applying pointing corrections' 2010-Oct-08 01:04:27 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-Oct-08 01:04:27 INFO2 finish_task: DONE finished applying: pointing corrections 2010-Oct-08 01:04:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:04:27 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2010-Oct-08 01:04:27 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-Oct-08 01:04:27 STOP finish_task: Finishing task 'selecting new source' 2010-Oct-08 01:04:27 LOG5 finish_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2010-Oct-08 01:04:27 DONE finish_task: DONE finished selecting: new source 2010-Oct-08 01:04:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-08 01:04:27 END end_task: Finishing task 'selecting new source' with status 'OK' 2010-Oct-08 01:04:27 LOG5 end_task: Level: (1) ID = <10012> Status = 0 0 0 0 ok 2010-Oct-08 01:04:27 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023052+252434" 2010-Oct-08 01:04:27 LOG4 got_cormsg: From DATATAKING: set ra 023051.81 2010-Oct-08 01:04:27 LOG4 got_cormsg: From DATATAKING: set dec 252433.76 2010-Oct-08 01:04:27 LOG4 got_cormsg: From DATATAKING: vw% 023051.81 2010-Oct-08 01:04:27 LOG4 got_cormsg: From DATATAKING: vw% 252433.76 2010-Oct-08 01:04:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:04:27 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Oct-08 01:04:27 LOG4 got_cormsg: From DATATAKING: pnt tr 023051.81 252433.76 -CJ 2010-Oct-08 01:04:27 LOG4 got_cormsg: From DATATAKING: dopsetvel 5188 topo 2010-Oct-08 01:04:27 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 01:04:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:04:27 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-08 01:04:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:09:51 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2010-Oct-08 01:09:51 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 off lcorcal each first one 2010-Oct-08 01:09:51 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 off lcorcal each first one' 2010-Oct-08 01:09:51 BEGIN begin_task: Starting task 'standard on/off' 2010-Oct-08 01:09:51 LOG5 begin_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2010-Oct-08 01:09:51 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'j023052+252434' 2010-Oct-08 01:09:51 INFO1 onoff_wapp: Starting pattern: Standard on/off 2010-Oct-08 01:09:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2010-Oct-08 01:09:51 START begin_task: Starting task 'waiting on telescope' 2010-Oct-08 01:09:51 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2010-Oct-08 01:09:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-08 01:09:51 LOG3 waittrk: Start waittrk 5 2010-Oct-08 01:09:51 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-08 01:09:51 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2010-Oct-08 01:09:56 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-08 01:09:56 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2010-Oct-08 01:09:56 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-08 01:09:56 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2010-Oct-08 01:09:56 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-08 01:09:56 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2010-Oct-08 01:09:56 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-08 01:09:56 INFO2 waittrk: Now tracking j023052+252434 2010-Oct-08 01:09:56 LOG4 waittrk: Current telescope position: Az = 231.38 ZA = 11.98 2010-Oct-08 01:09:56 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-08 01:09:56 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2010-Oct-08 01:09:56 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-08 01:09:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:09:56 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-08 01:09:56 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2010-Oct-08 01:09:56 START begin_task: Starting task 'selecting calibration type' 2010-Oct-08 01:09:56 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Oct-08 01:09:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-08 01:09:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-08 01:09:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:09:57 START begin_task: Starting task 'waiting on setcal' 2010-Oct-08 01:09:57 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Oct-08 01:09:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-08 01:09:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:09:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:09:57 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 01:09:57 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-08 01:09:57 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Oct-08 01:09:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-08 01:09:57 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-08 01:09:57 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Oct-08 01:09:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2010-Oct-08 01:09:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2010-Oct-08 01:09:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2010-Oct-08 01:09:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2010-Oct-08 01:09:57 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20101008.a2048.0000.fits' is empty! 2010-Oct-08 01:09:57 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2010-Oct-08 01:09:57 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2010-Oct-08 01:09:57 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-08 01:09:57 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-Oct-08 01:09:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-08 01:09:57 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-08 01:09:57 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023052+252434" 2010-Oct-08 01:09:57 LOG3 vw_send: To DATATAKING: pnt tr 23051.810000 252433.760000 -CJ 2010-Oct-08 01:09:57 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-08 01:09:57 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-Oct-08 01:09:57 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-08 01:09:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:09:57 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-08 01:09:57 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-Oct-08 01:09:57 START begin_task: Starting task 'waiting on telescope' 2010-Oct-08 01:09:57 LOG5 begin_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2010-Oct-08 01:09:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-08 01:09:57 LOG3 waittrk: Start waittrk 5 2010-Oct-08 01:09:57 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-08 01:09:57 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2010-Oct-08 01:09:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:09:57 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023052+252434" 2010-Oct-08 01:09:57 LOG4 got_cormsg: From DATATAKING: pnt tr 23051.810000 252433.760000 -CJ 2010-Oct-08 01:09:57 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 01:09:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2010-Oct-08 01:10:02 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-08 01:10:02 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2010-Oct-08 01:10:02 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-08 01:10:02 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2010-Oct-08 01:10:04 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-08 01:10:04 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2010-Oct-08 01:10:04 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-08 01:10:04 INFO2 waittrk: Now tracking j023052+252434 2010-Oct-08 01:10:04 LOG4 waittrk: Current telescope position: Az = 231.30 ZA = 11.96 2010-Oct-08 01:10:04 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-08 01:10:04 LOG5 finish_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2010-Oct-08 01:10:04 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-08 01:10:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:10:04 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-08 01:10:04 LOG5 end_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2010-Oct-08 01:10:04 LOG5 antvel: Calling 'antvel 23051.810000 252433.760000 J Topocentric 0' 2010-Oct-08 01:10:04 LOG2 antvel: Precessing RA = 02:30:51.8 Dec = +25:24:33.8 Epoch = 2010.76947 J 2010-Oct-08 01:10:04 LOG2 antvel: Computed apparent RA = 02:31:31.5 Dec = +25:27:34.7 2010-Oct-08 01:10:04 LOG2 antvel: Parameters to Doppler: Topocentric 18604 2010 281 0.0 2010-Oct-08 01:10:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Oct-08 01:10:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=5188.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-Oct-08 01:10:04 INFO4 dopset_gen: New sky frequencies: 1396.243335 1396.243335 1396.243335 1396.243335 1396.243335 1396.243335 1396.243335 1396.243335 1396.243335 2010-Oct-08 01:10:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1396.243335 sky0=1396.243335 sky1=1396.243335 sky2=1396.243335 sky3=1396.243335 sky4=1396.243335 sky5=1396.243335 sky6=1396.243335 sky7=1396.243335 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2010-Oct-08 01:10:04 LOG2 dopset_gen: Result from 'sky2syn': 11396.243335 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2010-Oct-08 01:10:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11396243335.0} 2010-Oct-08 01:10:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-08 01:10:04 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-08 01:10:04 LOG5 begin_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2010-Oct-08 01:10:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Oct-08 01:10:05 INFO2 adjust_power: Starting to adjust WAPP power 2010-Oct-08 01:10:05 LOG3 vw_send: To DATATAKING: adjpwrif1 2010-Oct-08 01:10:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2010-Oct-08 01:10:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:10:05 START begin_task: Starting task 'waiting on adjpwrif1' 2010-Oct-08 01:10:05 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2010-Oct-08 01:10:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11396243335.0} 2010-Oct-08 01:10:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-08 01:10:05 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2010-Oct-08 01:10:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:10:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:10:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:10:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:10:07 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 01:10:07 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2010-Oct-08 01:10:07 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2010-Oct-08 01:10:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2010-Oct-08 01:10:07 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Oct-08 01:10:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Oct-08 01:10:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:10:07 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Oct-08 01:10:07 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Oct-08 01:10:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:10:07 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Oct-08 01:10:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:10:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:10:10 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 01:10:10 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Oct-08 01:10:10 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Oct-08 01:10:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Oct-08 01:10:10 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-08 01:10:10 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-Oct-08 01:10:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Oct-08 01:10:10 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2010-Oct-08 01:10:10 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2010-Oct-08 01:10:10 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2010-Oct-08 01:10:10 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2010-Oct-08 01:10:10 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Oct-08 01:10:10 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2010-Oct-08 01:10:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:10:11 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 11 12 dB 2010-Oct-08 01:10:11 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2010-Oct-08 01:10:11 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2010-Oct-08 01:10:11 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2010-Oct-08 01:10:11 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2010-Oct-08 01:10:11 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 14 0 dB 2010-Oct-08 01:10:11 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 2 11 dB 2010-Oct-08 01:10:11 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 3 15 dB 2010-Oct-08 01:10:11 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Oct-08 01:10:11 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Oct-08 01:10:11 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2010-Oct-08 01:10:11 INFO2 wapp_adjpwr: WAPP power: 1.098 1.083 0.975 0.964 2010-Oct-08 01:10:11 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-08 01:10:11 LOG5 finish_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-Oct-08 01:10:11 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Oct-08 01:10:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:10:11 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-08 01:10:11 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-Oct-08 01:10:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-08 01:10:11 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-08 01:10:11 LOG5 finish_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2010-Oct-08 01:10:11 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Oct-08 01:10:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:10:11 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-08 01:10:11 LOG5 end_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2010-Oct-08 01:10:11 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON stat_onoff_on {ON scan}' 2010-Oct-08 01:10:11 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 01:10:11 LOG5 begin_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2010-Oct-08 01:10:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for ON scan ...} 2010-Oct-08 01:10:11 INFO2 take_data: Starting WAPP 300-second scan: 28100001 2010-Oct-08 01:10:12 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 01:10:12 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2010-Oct-08 01:10:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 01:10:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2010-Oct-08 01:10:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18613.00 2010-Oct-08 01:10:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11396.243335 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 01:10:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:10:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:10:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:10:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:10:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85797061 != 85797062 diff = 1)! 2010-Oct-08 01:10:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85797061 != 85797062 diff = 1)! 2010-Oct-08 01:10:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85797061 != 85797062 diff = 1)! 2010-Oct-08 01:10:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85797061 != 85797062 diff = 1)! 2010-Oct-08 01:10:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85797061 != 85797062 diff = 1)! 2010-Oct-08 01:10:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85797061 != 85797062 diff = 1)! 2010-Oct-08 01:10:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85797061 != 85797062 diff = 1)! 2010-Oct-08 01:10:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85782083 != 85782084 diff = 1)! 2010-Oct-08 01:10:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85782083 != 85782084 diff = 1)! 2010-Oct-08 01:10:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85782083 != 85782084 diff = 1)! 2010-Oct-08 01:10:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85782083 != 85782084 diff = 1)! 2010-Oct-08 01:10:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764065 != 85764066 diff = 1)! 2010-Oct-08 01:10:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764065 != 85764066 diff = 1)! 2010-Oct-08 01:10:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764065 != 85764066 diff = 1)! 2010-Oct-08 01:10:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764065 != 85764066 diff = 1)! 2010-Oct-08 01:10:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804196 != 85804195 diff = 1)! 2010-Oct-08 01:10:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804196 != 85804195 diff = 1)! 2010-Oct-08 01:10:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804196 != 85804195 diff = 1)! 2010-Oct-08 01:10:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804196 != 85804195 diff = 1)! 2010-Oct-08 01:10:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804196 != 85804195 diff = 1)! 2010-Oct-08 01:10:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804196 != 85804195 diff = 1)! 2010-Oct-08 01:10:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804196 != 85804195 diff = 1)! 2010-Oct-08 01:10:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85794418 != 85794417 diff = 1)! 2010-Oct-08 01:10:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85794418 != 85794417 diff = 1)! 2010-Oct-08 01:10:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764069 != 85764070 diff = 1)! 2010-Oct-08 01:10:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764069 != 85764070 diff = 1)! 2010-Oct-08 01:10:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764069 != 85764070 diff = 1)! 2010-Oct-08 01:10:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764078 != 85764077 diff = 1)! 2010-Oct-08 01:10:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764078 != 85764077 diff = 1)! 2010-Oct-08 01:10:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764078 != 85764077 diff = 1)! 2010-Oct-08 01:10:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764078 != 85764077 diff = 1)! 2010-Oct-08 01:10:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764064 != 85764063 diff = 1)! 2010-Oct-08 01:10:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764064 != 85764063 diff = 1)! 2010-Oct-08 01:10:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764064 != 85764063 diff = 1)! 2010-Oct-08 01:10:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764064 != 85764063 diff = 1)! 2010-Oct-08 01:10:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764064 != 85764063 diff = 1)! 2010-Oct-08 01:10:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764064 != 85764063 diff = 1)! 2010-Oct-08 01:11:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804188 != 85804187 diff = 1)! 2010-Oct-08 01:11:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804188 != 85804187 diff = 1)! 2010-Oct-08 01:11:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804188 != 85804187 diff = 1)! 2010-Oct-08 01:11:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804188 != 85804187 diff = 1)! 2010-Oct-08 01:11:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804203 != 85804204 diff = 1)! 2010-Oct-08 01:11:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804084 != 85804083 diff = 1)! 2010-Oct-08 01:11:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804084 != 85804083 diff = 1)! 2010-Oct-08 01:11:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804186 != 85804185 diff = 1)! 2010-Oct-08 01:11:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804186 != 85804185 diff = 1)! 2010-Oct-08 01:11:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804186 != 85804185 diff = 1)! 2010-Oct-08 01:11:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764070 != 85764069 diff = 1)! 2010-Oct-08 01:11:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764070 != 85764069 diff = 1)! 2010-Oct-08 01:11:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764070 != 85764069 diff = 1)! 2010-Oct-08 01:11:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764070 != 85764069 diff = 1)! 2010-Oct-08 01:11:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764070 != 85764069 diff = 1)! 2010-Oct-08 01:11:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764070 != 85764069 diff = 1)! 2010-Oct-08 01:11:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764070 != 85764069 diff = 1)! 2010-Oct-08 01:12:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:12:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:12:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:12:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:12:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:12:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:12:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:12:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804192 != 85804191 diff = 1)! 2010-Oct-08 01:12:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804192 != 85804191 diff = 1)! 2010-Oct-08 01:12:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:12:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:12:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:12:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:12:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:12:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:12:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:12:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:12:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85772050 != 85772049 diff = 1)! 2010-Oct-08 01:13:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764089 != 85764090 diff = 1)! 2010-Oct-08 01:13:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764089 != 85764090 diff = 1)! 2010-Oct-08 01:13:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85764089 != 85764090 diff = 1)! 2010-Oct-08 01:13:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764089 != 85764090 diff = 1)! 2010-Oct-08 01:13:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764089 != 85764088 diff = 1)! 2010-Oct-08 01:13:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85764089 != 85764090 diff = 1)! 2010-Oct-08 01:13:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804179 != 85804180 diff = 1)! 2010-Oct-08 01:13:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804179 != 85804180 diff = 1)! 2010-Oct-08 01:13:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85804179 != 85804180 diff = 1)! 2010-Oct-08 01:13:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804179 != 85804180 diff = 1)! 2010-Oct-08 01:13:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85804179 != 85804180 diff = 1)! 2010-Oct-08 01:13:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764079 != 85764080 diff = 1)! 2010-Oct-08 01:13:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764079 != 85764080 diff = 1)! 2010-Oct-08 01:13:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85764079 != 85764080 diff = 1)! 2010-Oct-08 01:13:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764079 != 85764080 diff = 1)! 2010-Oct-08 01:13:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85764079 != 85764080 diff = 1)! 2010-Oct-08 01:13:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764096 != 85764095 diff = 1)! 2010-Oct-08 01:13:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764076 != 85764075 diff = 1)! 2010-Oct-08 01:13:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764076 != 85764075 diff = 1)! 2010-Oct-08 01:14:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:14:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764079 != 85764080 diff = 1)! 2010-Oct-08 01:14:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764079 != 85764080 diff = 1)! 2010-Oct-08 01:14:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764079 != 85764080 diff = 1)! 2010-Oct-08 01:14:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764079 != 85764080 diff = 1)! 2010-Oct-08 01:14:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804186 != 85804185 diff = 1)! 2010-Oct-08 01:14:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764080 != 85764079 diff = 1)! 2010-Oct-08 01:14:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764080 != 85764079 diff = 1)! 2010-Oct-08 01:14:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764080 != 85764079 diff = 1)! 2010-Oct-08 01:15:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85797648 != 85797647 diff = 1)! 2010-Oct-08 01:15:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85797648 != 85797647 diff = 1)! 2010-Oct-08 01:15:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85791504 != 85791503 diff = 1)! 2010-Oct-08 01:15:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85791504 != 85791502 diff = 2)! 2010-Oct-08 01:15:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85791504 != 85791502 diff = 2)! 2010-Oct-08 01:15:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85791504 != 85791502 diff = 2)! 2010-Oct-08 01:15:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85791504 != 85791502 diff = 2)! 2010-Oct-08 01:15:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 01:15:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 01:15:13 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2010-Oct-08 01:15:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 01:15:13 LOG5 end_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2010-Oct-08 01:15:13 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2010-Oct-08 01:15:13 LOG2 onoff_wapp: Parameters: RA-offset: -90.957299999999847 arcminutes wait: 60 secs 2010-Oct-08 01:15:13 LOG4 track_offsets: Calling 'track_offsets -90.957299999999847 0.0 main small' 2010-Oct-08 01:15:13 START begin_task: Starting task 'sending telescope offsets' 2010-Oct-08 01:15:13 LOG5 begin_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2010-Oct-08 01:15:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2010-Oct-08 01:15:13 INFO2 track_offsets: Starting to send new offsets 2010-Oct-08 01:15:13 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023052+252434" 2010-Oct-08 01:15:13 LOG3 vw_send: To DATATAKING: pnt tr 23051.810000 252433.760000 -CJ -o -UD -1.51595 0.0 -CH 2010-Oct-08 01:15:13 STOP finish_task: Finishing task 'sending telescope offsets' 2010-Oct-08 01:15:13 LOG5 finish_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2010-Oct-08 01:15:13 INFO2 finish_task: DONE finished sending: telescope offsets 2010-Oct-08 01:15:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:15:13 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2010-Oct-08 01:15:13 LOG5 end_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2010-Oct-08 01:15:13 INFO2 lstwait: Waiting for 59.8 secs from LST 01:55:08 to LST 01:56:08 ... 2010-Oct-08 01:15:13 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836175999999789 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Oct-08 01:15:13 START begin_task: Starting task 'waiting on wait on LST' 2010-Oct-08 01:15:13 LOG5 begin_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2010-Oct-08 01:15:13 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023052+252434" 2010-Oct-08 01:15:13 LOG4 got_cormsg: From DATATAKING: pnt tr 23051.810000 252433.760000 -CJ -o -UD -1.51595 0.0 -CH 2010-Oct-08 01:15:13 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 01:15:58 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'j023052+252434' (after 45 seconds) 2010-Oct-08 01:15:58 LOG3 wait_and_tell_when_on_source: The telescope arrived at source with 15 seconds to spare (45 < 60 seconds) 2010-Oct-08 01:16:13 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-Oct-08 01:16:13 LOG5 end_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2010-Oct-08 01:16:13 LOG4 lstwait: Finished waiting 0.16 seconds late 2010-Oct-08 01:16:13 INFO3 lstwait: Finished waiting 2010-Oct-08 01:16:13 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Oct-08 01:16:13 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF stat_onoff_off {OFF scan}' 2010-Oct-08 01:16:13 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 01:16:13 LOG5 begin_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2010-Oct-08 01:16:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for OFF scan ...} 2010-Oct-08 01:16:13 INFO2 take_data: Starting WAPP 300-second scan: 28100002 2010-Oct-08 01:16:14 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 01:16:14 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Oct-08 01:16:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 01:16:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2010-Oct-08 01:16:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18975.00 2010-Oct-08 01:16:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11396.243335 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 01:16:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:16:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:16:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:16:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:16:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804197 != 85804198 diff = 1)! 2010-Oct-08 01:16:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804197 != 85804198 diff = 1)! 2010-Oct-08 01:16:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85784287 != 85784288 diff = 1)! 2010-Oct-08 01:16:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85784287 != 85784288 diff = 1)! 2010-Oct-08 01:16:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85784287 != 85784288 diff = 1)! 2010-Oct-08 01:16:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85773428 != 85773427 diff = 1)! 2010-Oct-08 01:16:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85773428 != 85773427 diff = 1)! 2010-Oct-08 01:16:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85773428 != 85773427 diff = 1)! 2010-Oct-08 01:16:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764086 != 85764085 diff = 1)! 2010-Oct-08 01:16:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804192 != 85804191 diff = 1)! 2010-Oct-08 01:16:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804192 != 85804191 diff = 1)! 2010-Oct-08 01:16:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804192 != 85804191 diff = 1)! 2010-Oct-08 01:16:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804192 != 85804191 diff = 1)! 2010-Oct-08 01:16:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804192 != 85804191 diff = 1)! 2010-Oct-08 01:16:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804192 != 85804191 diff = 1)! 2010-Oct-08 01:16:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804192 != 85804191 diff = 1)! 2010-Oct-08 01:16:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804192 != 85804191 diff = 1)! 2010-Oct-08 01:17:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86245348 != 86245347 diff = 1)! 2010-Oct-08 01:17:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86245348 != 86245347 diff = 1)! 2010-Oct-08 01:17:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86245348 != 86245347 diff = 1)! 2010-Oct-08 01:17:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86245348 != 86245347 diff = 1)! 2010-Oct-08 01:17:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804194 != 85804193 diff = 1)! 2010-Oct-08 01:17:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804198 != 85804197 diff = 1)! 2010-Oct-08 01:17:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804198 != 85804197 diff = 1)! 2010-Oct-08 01:17:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804198 != 85804197 diff = 1)! 2010-Oct-08 01:17:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804198 != 85804197 diff = 1)! 2010-Oct-08 01:17:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804198 != 85804197 diff = 1)! 2010-Oct-08 01:18:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85795524 != 85795523 diff = 1)! 2010-Oct-08 01:18:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85795524 != 85795523 diff = 1)! 2010-Oct-08 01:18:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85795524 != 85795523 diff = 1)! 2010-Oct-08 01:18:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764078 != 85764077 diff = 1)! 2010-Oct-08 01:18:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764078 != 85764077 diff = 1)! 2010-Oct-08 01:18:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85764078 != 85764077 diff = 1)! 2010-Oct-08 01:18:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764078 != 85764077 diff = 1)! 2010-Oct-08 01:18:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764078 != 85764077 diff = 1)! 2010-Oct-08 01:18:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764078 != 85764077 diff = 1)! 2010-Oct-08 01:18:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764078 != 85764077 diff = 1)! 2010-Oct-08 01:18:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764078 != 85764077 diff = 1)! 2010-Oct-08 01:18:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764075 != 85764076 diff = 1)! 2010-Oct-08 01:18:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764075 != 85764076 diff = 1)! 2010-Oct-08 01:18:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764075 != 85764076 diff = 1)! 2010-Oct-08 01:18:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85764075 != 85764076 diff = 1)! 2010-Oct-08 01:18:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764075 != 85764076 diff = 1)! 2010-Oct-08 01:18:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85799730 != 85799729 diff = 1)! 2010-Oct-08 01:18:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85799730 != 85799729 diff = 1)! 2010-Oct-08 01:18:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804177 != 85804178 diff = 1)! 2010-Oct-08 01:18:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85804177 != 85804178 diff = 1)! 2010-Oct-08 01:18:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804177 != 85804178 diff = 1)! 2010-Oct-08 01:18:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85804177 != 85804178 diff = 1)! 2010-Oct-08 01:18:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85774168 != 85774167 diff = 1)! 2010-Oct-08 01:18:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85774168 != 85774167 diff = 1)! 2010-Oct-08 01:18:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85774168 != 85774167 diff = 1)! 2010-Oct-08 01:18:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85774168 != 85774167 diff = 1)! 2010-Oct-08 01:18:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85774168 != 85774167 diff = 1)! 2010-Oct-08 01:19:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764078 != 85764077 diff = 1)! 2010-Oct-08 01:19:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764078 != 85764077 diff = 1)! 2010-Oct-08 01:19:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764078 != 85764077 diff = 1)! 2010-Oct-08 01:19:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764078 != 85764077 diff = 1)! 2010-Oct-08 01:19:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764078 != 85764077 diff = 1)! 2010-Oct-08 01:19:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764078 != 85764077 diff = 1)! 2010-Oct-08 01:19:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86365710 != 86365709 diff = 1)! 2010-Oct-08 01:19:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86365710 != 86365709 diff = 1)! 2010-Oct-08 01:19:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (86365710 != 86365709 diff = 1)! 2010-Oct-08 01:20:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85780142 != 85780143 diff = 1)! 2010-Oct-08 01:20:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85780142 != 85780143 diff = 1)! 2010-Oct-08 01:20:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85780142 != 85780143 diff = 1)! 2010-Oct-08 01:20:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85780142 != 85780143 diff = 1)! 2010-Oct-08 01:20:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85780142 != 85780143 diff = 1)! 2010-Oct-08 01:20:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85780142 != 85780143 diff = 1)! 2010-Oct-08 01:20:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85780142 != 85780143 diff = 1)! 2010-Oct-08 01:20:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85780142 != 85780143 diff = 1)! 2010-Oct-08 01:20:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764076 != 85764075 diff = 1)! 2010-Oct-08 01:20:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764076 != 85764075 diff = 1)! 2010-Oct-08 01:20:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764076 != 85764075 diff = 1)! 2010-Oct-08 01:20:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764076 != 85764075 diff = 1)! 2010-Oct-08 01:20:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764079 != 85764080 diff = 1)! 2010-Oct-08 01:20:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764079 != 85764080 diff = 1)! 2010-Oct-08 01:20:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764079 != 85764080 diff = 1)! 2010-Oct-08 01:20:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764079 != 85764080 diff = 1)! 2010-Oct-08 01:20:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804180 != 85804179 diff = 1)! 2010-Oct-08 01:20:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804180 != 85804179 diff = 1)! 2010-Oct-08 01:21:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804182 != 85804181 diff = 1)! 2010-Oct-08 01:21:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804198 != 85804197 diff = 1)! 2010-Oct-08 01:21:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 01:21:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 01:21:15 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Oct-08 01:21:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 01:21:15 LOG5 end_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2010-Oct-08 01:21:15 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2010-Oct-08 01:21:15 START begin_task: Starting task 'WAPP calibration' 2010-Oct-08 01:21:15 LOG5 begin_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2010-Oct-08 01:21:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Oct-08 01:21:15 START begin_task: Starting task 'selecting calibration type' 2010-Oct-08 01:21:15 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2010-Oct-08 01:21:15 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-08 01:21:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-08 01:21:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:21:15 START begin_task: Starting task 'waiting on setcal' 2010-Oct-08 01:21:15 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2010-Oct-08 01:21:15 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-08 01:21:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:21:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:21:15 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 01:21:15 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-08 01:21:15 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2010-Oct-08 01:21:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-08 01:21:15 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-08 01:21:15 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2010-Oct-08 01:21:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Oct-08 01:21:15 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Oct-08 01:21:15 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Oct-08 01:21:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-08 01:21:15 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-Oct-08 01:21:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:21:15 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-08 01:21:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Oct-08 01:21:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-08 01:21:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-08 01:21:15 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-Oct-08 01:21:15 LOG4 take_data: Calling 'take_data 10 10 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Oct-08 01:21:15 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 01:21:15 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2010-Oct-08 01:21:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Oct-08 01:21:16 INFO2 take_data: Starting WAPP 10-second scan: 28100003 2010-Oct-08 01:21:16 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 01:21:16 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2010-Oct-08 01:21:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 01:21:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Oct-08 01:21:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19277.00 2010-Oct-08 01:21:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11396.243335 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 01:21:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:21:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:21:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:21:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:21:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 01:21:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (857841574 != 857841573 diff = 1)! 2010-Oct-08 01:21:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (857841574 != 857841573 diff = 1)! 2010-Oct-08 01:21:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (857841574 != 857841573 diff = 1)! 2010-Oct-08 01:21:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 01:21:27 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2010-Oct-08 01:21:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 01:21:27 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2010-Oct-08 01:21:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Oct-08 01:21:27 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Oct-08 01:21:27 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Oct-08 01:21:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-08 01:21:27 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2010-Oct-08 01:21:27 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-08 01:21:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (857841574 != 857841573 diff = 1)! 2010-Oct-08 01:21:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (857841574 != 857841573 diff = 1)! 2010-Oct-08 01:21:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (857841574 != 857841573 diff = 1)! 2010-Oct-08 01:21:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Oct-08 01:21:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-08 01:21:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-08 01:21:27 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2010-Oct-08 01:21:27 LOG4 take_data: Calling 'take_data 10 10 CAL OFF stat_cal_off {CAL-OFF spectra}' 2010-Oct-08 01:21:27 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 01:21:27 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2010-Oct-08 01:21:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2010-Oct-08 01:21:27 INFO2 take_data: Starting WAPP 10-second scan: 28100004 2010-Oct-08 01:21:28 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 01:21:28 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2010-Oct-08 01:21:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 01:21:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2010-Oct-08 01:21:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19289.00 2010-Oct-08 01:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11396.243335 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 01:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:21:39 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2010-Oct-08 01:21:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 01:21:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (858118609 != 858118610 diff = 1)! 2010-Oct-08 01:21:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (858118609 != 858118610 diff = 1)! 2010-Oct-08 01:21:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (858118609 != 858118610 diff = 1)! 2010-Oct-08 01:21:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 01:21:39 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2010-Oct-08 01:21:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 01:21:39 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2010-Oct-08 01:21:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-08 01:21:39 STOP finish_task: Finishing task 'WAPP calibration' 2010-Oct-08 01:21:39 LOG5 finish_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2010-Oct-08 01:21:39 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Oct-08 01:21:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:21:39 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Oct-08 01:21:39 LOG5 end_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2010-Oct-08 01:21:39 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-08 01:21:39 LOG5 begin_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2010-Oct-08 01:21:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-08 01:21:39 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-08 01:21:39 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023052+252434" 2010-Oct-08 01:21:39 LOG3 vw_send: To DATATAKING: pnt tr 23051.810000 252433.760000 -CJ 2010-Oct-08 01:21:39 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-08 01:21:39 LOG5 finish_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2010-Oct-08 01:21:39 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-08 01:21:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:21:39 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-08 01:21:39 LOG5 end_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2010-Oct-08 01:21:39 STOP finish_task: Finishing task 'standard on/off' 2010-Oct-08 01:21:39 LOG5 finish_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2010-Oct-08 01:21:39 DONE finish_task: DONE finished pattern: standard on/off 2010-Oct-08 01:21:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-08 01:21:40 END end_task: Finishing task 'standard on/off' with status 'OK' 2010-Oct-08 01:21:40 LOG5 end_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2010-Oct-08 01:21:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023052+252434" 2010-Oct-08 01:21:40 LOG4 got_cormsg: From DATATAKING: pnt tr 23051.810000 252433.760000 -CJ 2010-Oct-08 01:21:40 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 01:21:46 COMMAND CIMA-send_to_exec: Sending command to point to a source 2010-Oct-08 01:21:47 LOG4 exec_msg: From OBSERVER: track_new_source j023751+262746 023751.29 262746.14 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 8518 Topocentric velocity(optical) 0 0 0.0 0.0 0 2010-Oct-08 01:21:47 LOG1 track_new_source: Calling 'track_new_source j023751+262746 023751.29 262746.14 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 8518 Topocentric velocity(optical) 0 0 0.0 0.0 0' 2010-Oct-08 01:21:47 BEGIN begin_task: Starting task 'selecting new source' 2010-Oct-08 01:21:47 LOG5 begin_task: Level: (1) ID = <10046> Status = 0 0 0 0 ok 2010-Oct-08 01:21:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {j023751+262746} INFO {Selecting source 'j023751+262746' ...} 2010-Oct-08 01:21:47 LOG3 track_source: Calling 'track_source j023751+262746 023751.29 262746.14 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 8518 Topocentric velocity(optical)' 2010-Oct-08 01:21:47 START begin_task: Starting task 'sending tracking commands' 2010-Oct-08 01:21:47 LOG5 begin_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2010-Oct-08 01:21:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {j023751+262746} INFO {Slewing to source 'j023751+262746' ...} 2010-Oct-08 01:21:47 INFO1 track_source: Starting to track j023751+262746 2010-Oct-08 01:21:47 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023751+262746" 2010-Oct-08 01:21:47 LOG3 vw_send: To DATATAKING: set ra 023751.29 2010-Oct-08 01:21:47 LOG3 vw_send: To DATATAKING: set dec 262746.14 2010-Oct-08 01:21:47 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Oct-08 01:21:47 LOG3 vw_send: To DATATAKING: pnt tr 023751.29 262746.14 -CJ 2010-Oct-08 01:21:47 LOG3 vw_send: To DATATAKING: dopsetvel 8518 topo 2010-Oct-08 01:21:47 STOP finish_task: Finishing task 'sending tracking commands' 2010-Oct-08 01:21:47 LOG5 finish_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2010-Oct-08 01:21:47 INFO2 finish_task: DONE finished sending: tracking commands 2010-Oct-08 01:21:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:21:47 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Oct-08 01:21:47 LOG5 end_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2010-Oct-08 01:21:47 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2010-Oct-08 01:21:47 START begin_task: Starting task 'applying pointing corrections' 2010-Oct-08 01:21:47 LOG5 begin_task: Level: (2) ID = <10048> Status = 0 0 0 0 ok 2010-Oct-08 01:21:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2010-Oct-08 01:21:47 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-08 01:21:47 STOP finish_task: Finishing task 'applying pointing corrections' 2010-Oct-08 01:21:47 LOG5 finish_task: Level: (2) ID = <10048> Status = 0 0 0 0 ok 2010-Oct-08 01:21:47 INFO2 finish_task: DONE finished applying: pointing corrections 2010-Oct-08 01:21:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:21:47 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2010-Oct-08 01:21:47 LOG5 end_task: Level: (2) ID = <10048> Status = 0 0 0 0 ok 2010-Oct-08 01:21:47 STOP finish_task: Finishing task 'selecting new source' 2010-Oct-08 01:21:47 LOG5 finish_task: Level: (1) ID = <10046> Status = 0 0 0 0 ok 2010-Oct-08 01:21:47 DONE finish_task: DONE finished selecting: new source 2010-Oct-08 01:21:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-08 01:21:47 END end_task: Finishing task 'selecting new source' with status 'OK' 2010-Oct-08 01:21:47 LOG5 end_task: Level: (1) ID = <10046> Status = 0 0 0 0 ok 2010-Oct-08 01:21:47 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023751+262746" 2010-Oct-08 01:21:47 LOG4 got_cormsg: From DATATAKING: set ra 023751.29 2010-Oct-08 01:21:47 LOG4 got_cormsg: From DATATAKING: set dec 262746.14 2010-Oct-08 01:21:47 LOG4 got_cormsg: From DATATAKING: vw% 023751.29 2010-Oct-08 01:21:47 LOG4 got_cormsg: From DATATAKING: vw% 262746.14 2010-Oct-08 01:21:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:21:47 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Oct-08 01:21:47 LOG4 got_cormsg: From DATATAKING: pnt tr 023751.29 262746.14 -CJ 2010-Oct-08 01:21:47 LOG4 got_cormsg: From DATATAKING: dopsetvel 8518 topo 2010-Oct-08 01:21:47 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 01:21:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:21:47 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-08 01:21:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:21:52 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2010-Oct-08 01:21:52 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 off lcorcal each first one 2010-Oct-08 01:21:52 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 off lcorcal each first one' 2010-Oct-08 01:21:52 BEGIN begin_task: Starting task 'standard on/off' 2010-Oct-08 01:21:52 LOG5 begin_task: Level: (1) ID = <10049> Status = 0 0 0 0 ok 2010-Oct-08 01:21:52 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'j023751+262746' 2010-Oct-08 01:21:52 INFO1 onoff_wapp: Starting pattern: Standard on/off 2010-Oct-08 01:21:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2010-Oct-08 01:21:52 START begin_task: Starting task 'waiting on telescope' 2010-Oct-08 01:21:52 LOG5 begin_task: Level: (2) ID = <10050> Status = 0 0 0 0 ok 2010-Oct-08 01:21:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-08 01:21:52 LOG3 waittrk: Start waittrk 5 2010-Oct-08 01:21:52 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-08 01:21:52 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-Oct-08 01:21:57 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-08 01:21:57 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-Oct-08 01:21:57 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-08 01:21:57 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2010-Oct-08 01:22:27 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-08 01:22:27 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2010-Oct-08 01:22:27 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-08 01:22:27 INFO2 waittrk: Now tracking j023751+262746 2010-Oct-08 01:22:27 LOG4 waittrk: Current telescope position: Az = 223.60 ZA = 11.66 2010-Oct-08 01:22:27 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-08 01:22:27 LOG5 finish_task: Level: (2) ID = <10050> Status = 0 0 0 0 ok 2010-Oct-08 01:22:27 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-08 01:22:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:22:27 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-08 01:22:27 LOG5 end_task: Level: (2) ID = <10050> Status = 0 0 0 0 ok 2010-Oct-08 01:22:27 START begin_task: Starting task 'selecting calibration type' 2010-Oct-08 01:22:27 LOG5 begin_task: Level: (2) ID = <10053> Status = 0 0 0 0 ok 2010-Oct-08 01:22:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-08 01:22:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-08 01:22:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:22:27 START begin_task: Starting task 'waiting on setcal' 2010-Oct-08 01:22:27 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2010-Oct-08 01:22:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-08 01:22:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:22:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:22:27 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 01:22:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-08 01:22:27 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2010-Oct-08 01:22:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-08 01:22:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-08 01:22:27 LOG5 end_task: Level: (2) ID = <10053> Status = 0 0 0 0 ok 2010-Oct-08 01:22:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2010-Oct-08 01:22:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2010-Oct-08 01:22:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2010-Oct-08 01:22:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2010-Oct-08 01:22:27 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2010-Oct-08 01:22:27 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2010-Oct-08 01:22:27 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-08 01:22:27 LOG5 begin_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2010-Oct-08 01:22:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-08 01:22:27 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-08 01:22:27 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023751+262746" 2010-Oct-08 01:22:27 LOG3 vw_send: To DATATAKING: pnt tr 23751.290000 262746.140000 -CJ 2010-Oct-08 01:22:27 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-08 01:22:27 LOG5 finish_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2010-Oct-08 01:22:27 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-08 01:22:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:22:27 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-08 01:22:27 LOG5 end_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2010-Oct-08 01:22:27 START begin_task: Starting task 'waiting on telescope' 2010-Oct-08 01:22:27 LOG5 begin_task: Level: (2) ID = <10056> Status = 0 0 0 0 ok 2010-Oct-08 01:22:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-08 01:22:27 LOG3 waittrk: Start waittrk 5 2010-Oct-08 01:22:27 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-08 01:22:27 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2010-Oct-08 01:22:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2010-Oct-08 01:22:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:22:27 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023751+262746" 2010-Oct-08 01:22:27 LOG4 got_cormsg: From DATATAKING: pnt tr 23751.290000 262746.140000 -CJ 2010-Oct-08 01:22:27 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 01:22:28 NOTE WAPPDATA-new_file: New FITS file: wapp.20101008.a2048.0001.fits 2010-Oct-08 01:22:28 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20101008.a2048.0001.fits} 2010-Oct-08 01:22:32 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-08 01:22:32 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2010-Oct-08 01:22:32 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-08 01:22:32 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-Oct-08 01:22:35 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-08 01:22:35 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-Oct-08 01:22:35 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-08 01:22:35 INFO2 waittrk: Now tracking j023751+262746 2010-Oct-08 01:22:35 LOG4 waittrk: Current telescope position: Az = 223.51 ZA = 11.64 2010-Oct-08 01:22:35 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-08 01:22:35 LOG5 finish_task: Level: (2) ID = <10056> Status = 0 0 0 0 ok 2010-Oct-08 01:22:35 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-08 01:22:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:22:35 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-08 01:22:35 LOG5 end_task: Level: (2) ID = <10056> Status = 0 0 0 0 ok 2010-Oct-08 01:22:35 LOG5 antvel: Calling 'antvel 23751.290000 262746.140000 J Topocentric 0' 2010-Oct-08 01:22:35 LOG2 antvel: Precessing RA = 02:37:51.3 Dec = +26:27:46.1 Epoch = 2010.76949 J 2010-Oct-08 01:22:35 LOG2 antvel: Computed apparent RA = 02:38:31.4 Dec = +26:30:42.5 2010-Oct-08 01:22:35 LOG2 antvel: Parameters to Doppler: Topocentric 19354 2010 281 0.0 2010-Oct-08 01:22:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Oct-08 01:22:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8518.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-Oct-08 01:22:35 INFO4 dopset_gen: New sky frequencies: 1381.162788 1381.162788 1381.162788 1381.162788 1381.162788 1381.162788 1381.162788 1381.162788 1381.162788 2010-Oct-08 01:22:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.162788 sky0=1381.162788 sky1=1381.162788 sky2=1381.162788 sky3=1381.162788 sky4=1381.162788 sky5=1381.162788 sky6=1381.162788 sky7=1381.162788 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2010-Oct-08 01:22:35 LOG2 dopset_gen: Result from 'sky2syn': 11381.162788 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2010-Oct-08 01:22:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11381162788.0} 2010-Oct-08 01:22:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-08 01:22:35 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-08 01:22:35 LOG5 begin_task: Level: (2) ID = <10059> Status = 0 0 0 0 ok 2010-Oct-08 01:22:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Oct-08 01:22:35 INFO2 adjust_power: Starting to adjust WAPP power 2010-Oct-08 01:22:35 LOG3 vw_send: To DATATAKING: adjpwrif1 2010-Oct-08 01:22:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2010-Oct-08 01:22:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:22:35 START begin_task: Starting task 'waiting on adjpwrif1' 2010-Oct-08 01:22:35 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-Oct-08 01:22:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11381162788.0} 2010-Oct-08 01:22:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-08 01:22:35 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2010-Oct-08 01:22:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:22:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:22:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:22:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:22:35 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 01:22:35 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2010-Oct-08 01:22:35 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-Oct-08 01:22:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2010-Oct-08 01:22:35 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Oct-08 01:22:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Oct-08 01:22:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:22:35 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Oct-08 01:22:35 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2010-Oct-08 01:22:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:22:35 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Oct-08 01:22:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:22:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:22:37 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 01:22:37 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Oct-08 01:22:37 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2010-Oct-08 01:22:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Oct-08 01:22:37 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-08 01:22:37 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-Oct-08 01:22:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Oct-08 01:22:37 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2010-Oct-08 01:22:37 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2010-Oct-08 01:22:37 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2010-Oct-08 01:22:37 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2010-Oct-08 01:22:37 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Oct-08 01:22:37 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2010-Oct-08 01:22:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:22:37 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 12 12 dB 2010-Oct-08 01:22:37 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2010-Oct-08 01:22:37 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2010-Oct-08 01:22:37 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2010-Oct-08 01:22:37 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2010-Oct-08 01:22:37 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 15 0 dB 2010-Oct-08 01:22:37 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 2 12 dB 2010-Oct-08 01:22:37 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 3 15 dB 2010-Oct-08 01:22:37 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Oct-08 01:22:37 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Oct-08 01:22:37 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2010-Oct-08 01:22:37 INFO2 wapp_adjpwr: WAPP power: 1.087 0.915 0.988 1.002 2010-Oct-08 01:22:37 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-08 01:22:37 LOG5 finish_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-Oct-08 01:22:37 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Oct-08 01:22:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:22:38 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-08 01:22:38 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-Oct-08 01:22:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-08 01:22:38 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-08 01:22:38 LOG5 finish_task: Level: (2) ID = <10059> Status = 0 0 0 0 ok 2010-Oct-08 01:22:38 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Oct-08 01:22:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:22:38 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-08 01:22:38 LOG5 end_task: Level: (2) ID = <10059> Status = 0 0 0 0 ok 2010-Oct-08 01:22:38 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON stat_onoff_on {ON scan}' 2010-Oct-08 01:22:38 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 01:22:38 LOG5 begin_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2010-Oct-08 01:22:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for ON scan ...} 2010-Oct-08 01:22:38 INFO2 take_data: Starting WAPP 300-second scan: 28100005 2010-Oct-08 01:22:38 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 01:22:38 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2010-Oct-08 01:22:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 01:22:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2010-Oct-08 01:22:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19359.00 2010-Oct-08 01:22:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11381.162788 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 01:22:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.162788 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:22:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.162788 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:22:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.162788 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:22:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.162788 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:23:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764070 != 85764069 diff = 1)! 2010-Oct-08 01:23:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764075 != 85764076 diff = 1)! 2010-Oct-08 01:23:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764075 != 85764076 diff = 1)! 2010-Oct-08 01:23:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764075 != 85764076 diff = 1)! 2010-Oct-08 01:23:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764075 != 85764076 diff = 1)! 2010-Oct-08 01:23:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85764075 != 85764076 diff = 1)! 2010-Oct-08 01:23:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764075 != 85764076 diff = 1)! 2010-Oct-08 01:23:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804172 != 85804171 diff = 1)! 2010-Oct-08 01:23:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804172 != 85804171 diff = 1)! 2010-Oct-08 01:23:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804172 != 85804171 diff = 1)! 2010-Oct-08 01:23:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804172 != 85804171 diff = 1)! 2010-Oct-08 01:23:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764040 != 85764039 diff = 1)! 2010-Oct-08 01:23:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85789434 != 85789433 diff = 1)! 2010-Oct-08 01:23:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764090 != 85764089 diff = 1)! 2010-Oct-08 01:23:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764090 != 85764089 diff = 1)! 2010-Oct-08 01:23:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764090 != 85764089 diff = 1)! 2010-Oct-08 01:23:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764090 != 85764089 diff = 1)! 2010-Oct-08 01:23:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764090 != 85764089 diff = 1)! 2010-Oct-08 01:23:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764090 != 85764089 diff = 1)! 2010-Oct-08 01:23:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764090 != 85764089 diff = 1)! 2010-Oct-08 01:23:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764090 != 85764089 diff = 1)! 2010-Oct-08 01:23:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85773094 != 85773093 diff = 1)! 2010-Oct-08 01:23:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764063 != 85764064 diff = 1)! 2010-Oct-08 01:23:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764063 != 85764064 diff = 1)! 2010-Oct-08 01:23:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764063 != 85764064 diff = 1)! 2010-Oct-08 01:23:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764063 != 85764064 diff = 1)! 2010-Oct-08 01:23:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85764063 != 85764064 diff = 1)! 2010-Oct-08 01:23:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85764063 != 85764064 diff = 1)! 2010-Oct-08 01:23:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764063 != 85764064 diff = 1)! 2010-Oct-08 01:24:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85964641 != 85964640 diff = 1)! 2010-Oct-08 01:24:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85964641 != 85964640 diff = 1)! 2010-Oct-08 01:24:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85964641 != 85964640 diff = 1)! 2010-Oct-08 01:24:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85964641 != 85964640 diff = 1)! 2010-Oct-08 01:24:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85964641 != 85964640 diff = 1)! 2010-Oct-08 01:24:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85964641 != 85964640 diff = 1)! 2010-Oct-08 01:24:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85964641 != 85964640 diff = 1)! 2010-Oct-08 01:24:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85964641 != 85964640 diff = 1)! 2010-Oct-08 01:24:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804199 != 85804200 diff = 1)! 2010-Oct-08 01:24:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804199 != 85804200 diff = 1)! 2010-Oct-08 01:24:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804199 != 85804200 diff = 1)! 2010-Oct-08 01:24:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804199 != 85804200 diff = 1)! 2010-Oct-08 01:24:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804174 != 85804173 diff = 1)! 2010-Oct-08 01:24:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804174 != 85804173 diff = 1)! 2010-Oct-08 01:24:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804174 != 85804173 diff = 1)! 2010-Oct-08 01:24:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804174 != 85804173 diff = 1)! 2010-Oct-08 01:24:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804174 != 85804173 diff = 1)! 2010-Oct-08 01:24:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764069 != 85764070 diff = 1)! 2010-Oct-08 01:24:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764069 != 85764070 diff = 1)! 2010-Oct-08 01:24:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85764069 != 85764070 diff = 1)! 2010-Oct-08 01:24:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764069 != 85764070 diff = 1)! 2010-Oct-08 01:24:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85764069 != 85764070 diff = 1)! 2010-Oct-08 01:25:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764062 != 85764061 diff = 1)! 2010-Oct-08 01:25:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764062 != 85764061 diff = 1)! 2010-Oct-08 01:25:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764062 != 85764061 diff = 1)! 2010-Oct-08 01:25:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764062 != 85764061 diff = 1)! 2010-Oct-08 01:25:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764062 != 85764061 diff = 1)! 2010-Oct-08 01:25:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764062 != 85764061 diff = 1)! 2010-Oct-08 01:25:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804163 != 85804164 diff = 1)! 2010-Oct-08 01:25:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804163 != 85804164 diff = 1)! 2010-Oct-08 01:25:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804163 != 85804164 diff = 1)! 2010-Oct-08 01:25:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764076 != 85764075 diff = 1)! 2010-Oct-08 01:25:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764076 != 85764075 diff = 1)! 2010-Oct-08 01:25:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764076 != 85764075 diff = 1)! 2010-Oct-08 01:26:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764082 != 85764081 diff = 1)! 2010-Oct-08 01:26:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764082 != 85764081 diff = 1)! 2010-Oct-08 01:26:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804192 != 85804191 diff = 1)! 2010-Oct-08 01:26:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804192 != 85804191 diff = 1)! 2010-Oct-08 01:26:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804192 != 85804191 diff = 1)! 2010-Oct-08 01:26:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804192 != 85804191 diff = 1)! 2010-Oct-08 01:26:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:26:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:26:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:26:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804159 != 85804160 diff = 1)! 2010-Oct-08 01:26:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804159 != 85804160 diff = 1)! 2010-Oct-08 01:26:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85804159 != 85804160 diff = 1)! 2010-Oct-08 01:26:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804159 != 85804160 diff = 1)! 2010-Oct-08 01:26:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85804159 != 85804160 diff = 1)! 2010-Oct-08 01:26:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85804159 != 85804160 diff = 1)! 2010-Oct-08 01:26:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86004732 != 86004731 diff = 1)! 2010-Oct-08 01:26:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86004732 != 86004731 diff = 1)! 2010-Oct-08 01:26:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86004732 != 86004731 diff = 1)! 2010-Oct-08 01:26:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86004732 != 86004731 diff = 1)! 2010-Oct-08 01:26:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (86004732 != 86004731 diff = 1)! 2010-Oct-08 01:26:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (86004732 != 86004731 diff = 1)! 2010-Oct-08 01:26:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86004732 != 86004731 diff = 1)! 2010-Oct-08 01:26:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764115 != 85764114 diff = 1)! 2010-Oct-08 01:26:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (86245347 != 86245348 diff = 1)! 2010-Oct-08 01:26:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (86245347 != 86245348 diff = 1)! 2010-Oct-08 01:26:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (86245347 != 86245348 diff = 1)! 2010-Oct-08 01:26:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764096 != 85764095 diff = 1)! 2010-Oct-08 01:26:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764096 != 85764095 diff = 1)! 2010-Oct-08 01:26:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764096 != 85764095 diff = 1)! 2010-Oct-08 01:26:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764096 != 85764095 diff = 1)! 2010-Oct-08 01:27:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804186 != 85804185 diff = 1)! 2010-Oct-08 01:27:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804186 != 85804185 diff = 1)! 2010-Oct-08 01:27:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804186 != 85804185 diff = 1)! 2010-Oct-08 01:27:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804186 != 85804185 diff = 1)! 2010-Oct-08 01:27:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804186 != 85804185 diff = 1)! 2010-Oct-08 01:27:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804186 != 85804185 diff = 1)! 2010-Oct-08 01:27:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764578 != 85764577 diff = 1)! 2010-Oct-08 01:27:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764578 != 85764577 diff = 1)! 2010-Oct-08 01:27:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764578 != 85764577 diff = 1)! 2010-Oct-08 01:27:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764578 != 85764577 diff = 1)! 2010-Oct-08 01:27:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764578 != 85764577 diff = 1)! 2010-Oct-08 01:27:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804196 != 85804195 diff = 1)! 2010-Oct-08 01:27:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804163 != 85804164 diff = 1)! 2010-Oct-08 01:27:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804163 != 85804164 diff = 1)! 2010-Oct-08 01:27:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804163 != 85804164 diff = 1)! 2010-Oct-08 01:27:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 01:27:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 01:27:39 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2010-Oct-08 01:27:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 01:27:39 LOG5 end_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2010-Oct-08 01:27:39 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2010-Oct-08 01:27:39 LOG2 onoff_wapp: Parameters: RA-offset: -90.706200000000123 arcminutes wait: 60 secs 2010-Oct-08 01:27:39 LOG4 track_offsets: Calling 'track_offsets -90.706200000000123 0.0 main small' 2010-Oct-08 01:27:39 START begin_task: Starting task 'sending telescope offsets' 2010-Oct-08 01:27:39 LOG5 begin_task: Level: (2) ID = <10066> Status = 0 0 0 0 ok 2010-Oct-08 01:27:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2010-Oct-08 01:27:39 INFO2 track_offsets: Starting to send new offsets 2010-Oct-08 01:27:39 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023751+262746" 2010-Oct-08 01:27:39 LOG3 vw_send: To DATATAKING: pnt tr 23751.290000 262746.140000 -CJ -o -UD -1.51177 0.0 -CH 2010-Oct-08 01:27:39 STOP finish_task: Finishing task 'sending telescope offsets' 2010-Oct-08 01:27:39 LOG5 finish_task: Level: (2) ID = <10066> Status = 0 0 0 0 ok 2010-Oct-08 01:27:39 INFO2 finish_task: DONE finished sending: telescope offsets 2010-Oct-08 01:27:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:27:39 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2010-Oct-08 01:27:39 LOG5 end_task: Level: (2) ID = <10066> Status = 0 0 0 0 ok 2010-Oct-08 01:27:39 INFO2 lstwait: Waiting for 59.8 secs from LST 02:07:37 to LST 02:08:37 ... 2010-Oct-08 01:27:39 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836175999999789 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Oct-08 01:27:39 START begin_task: Starting task 'waiting on wait on LST' 2010-Oct-08 01:27:39 LOG5 begin_task: Level: (2) ID = <10067> Status = 0 0 0 0 ok 2010-Oct-08 01:27:39 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023751+262746" 2010-Oct-08 01:27:39 LOG4 got_cormsg: From DATATAKING: pnt tr 23751.290000 262746.140000 -CJ -o -UD -1.51177 0.0 -CH 2010-Oct-08 01:27:39 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 01:28:11 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'j023751+262746' (after 32 seconds) 2010-Oct-08 01:28:11 LOG3 wait_and_tell_when_on_source: The telescope arrived at source with 28 seconds to spare (32 < 60 seconds) 2010-Oct-08 01:28:39 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-Oct-08 01:28:39 LOG5 end_task: Level: (2) ID = <10067> Status = 0 0 0 0 ok 2010-Oct-08 01:28:39 LOG4 lstwait: Finished waiting 0.17 seconds late 2010-Oct-08 01:28:39 INFO3 lstwait: Finished waiting 2010-Oct-08 01:28:39 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Oct-08 01:28:39 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF stat_onoff_off {OFF scan}' 2010-Oct-08 01:28:39 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 01:28:39 LOG5 begin_task: Level: (2) ID = <10068> Status = 0 0 0 0 ok 2010-Oct-08 01:28:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for OFF scan ...} 2010-Oct-08 01:28:39 INFO2 take_data: Starting WAPP 300-second scan: 28100006 2010-Oct-08 01:28:40 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 01:28:40 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2010-Oct-08 01:28:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 01:28:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2010-Oct-08 01:28:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19721.00 2010-Oct-08 01:28:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11381.162788 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 01:28:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.162788 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:28:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.162788 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:28:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.162788 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:28:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.162788 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:28:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85783372 != 85783371 diff = 1)! 2010-Oct-08 01:28:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85783372 != 85783371 diff = 1)! 2010-Oct-08 01:28:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85783372 != 85783371 diff = 1)! 2010-Oct-08 01:28:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85783372 != 85783371 diff = 1)! 2010-Oct-08 01:28:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85783372 != 85783371 diff = 1)! 2010-Oct-08 01:28:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85783372 != 85783371 diff = 1)! 2010-Oct-08 01:28:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85783372 != 85783371 diff = 1)! 2010-Oct-08 01:29:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764085 != 85764086 diff = 1)! 2010-Oct-08 01:29:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764085 != 85764086 diff = 1)! 2010-Oct-08 01:29:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764085 != 85764086 diff = 1)! 2010-Oct-08 01:29:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764085 != 85764086 diff = 1)! 2010-Oct-08 01:29:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85776812 != 85776811 diff = 1)! 2010-Oct-08 01:29:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85776812 != 85776811 diff = 1)! 2010-Oct-08 01:29:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85776812 != 85776811 diff = 1)! 2010-Oct-08 01:29:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85776812 != 85776811 diff = 1)! 2010-Oct-08 01:29:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85776812 != 85776811 diff = 1)! 2010-Oct-08 01:29:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85776812 != 85776811 diff = 1)! 2010-Oct-08 01:29:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85776812 != 85776811 diff = 1)! 2010-Oct-08 01:29:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85776812 != 85776811 diff = 1)! 2010-Oct-08 01:29:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85801547 != 85801548 diff = 1)! 2010-Oct-08 01:29:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85801547 != 85801548 diff = 1)! 2010-Oct-08 01:29:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85801547 != 85801548 diff = 1)! 2010-Oct-08 01:29:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85801547 != 85801548 diff = 1)! 2010-Oct-08 01:29:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85801547 != 85801548 diff = 1)! 2010-Oct-08 01:29:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804176 != 85804175 diff = 1)! 2010-Oct-08 01:29:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804198 != 85804197 diff = 1)! 2010-Oct-08 01:29:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804198 != 85804197 diff = 1)! 2010-Oct-08 01:29:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764072 != 85764071 diff = 1)! 2010-Oct-08 01:29:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764072 != 85764071 diff = 1)! 2010-Oct-08 01:29:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764072 != 85764071 diff = 1)! 2010-Oct-08 01:29:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764072 != 85764071 diff = 1)! 2010-Oct-08 01:30:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:30:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:30:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:30:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:30:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:30:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:30:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:30:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:30:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804169 != 85804170 diff = 1)! 2010-Oct-08 01:30:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85924538 != 85924537 diff = 1)! 2010-Oct-08 01:30:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85797011 != 85797012 diff = 1)! 2010-Oct-08 01:30:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85797011 != 85797012 diff = 1)! 2010-Oct-08 01:30:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85797011 != 85797012 diff = 1)! 2010-Oct-08 01:30:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85797011 != 85797012 diff = 1)! 2010-Oct-08 01:30:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85797011 != 85797010 diff = 1)! 2010-Oct-08 01:30:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85964642 != 85964641 diff = 1)! 2010-Oct-08 01:31:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804182 != 85804181 diff = 1)! 2010-Oct-08 01:31:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804182 != 85804181 diff = 1)! 2010-Oct-08 01:31:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804182 != 85804181 diff = 1)! 2010-Oct-08 01:31:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804182 != 85804181 diff = 1)! 2010-Oct-08 01:31:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86045830 != 86045829 diff = 1)! 2010-Oct-08 01:31:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86045830 != 86045829 diff = 1)! 2010-Oct-08 01:31:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86045830 != 86045829 diff = 1)! 2010-Oct-08 01:31:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86045830 != 86045829 diff = 1)! 2010-Oct-08 01:31:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804197 != 85804198 diff = 1)! 2010-Oct-08 01:31:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804197 != 85804198 diff = 1)! 2010-Oct-08 01:31:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804197 != 85804198 diff = 1)! 2010-Oct-08 01:31:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804197 != 85804198 diff = 1)! 2010-Oct-08 01:32:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85783752 != 85783751 diff = 1)! 2010-Oct-08 01:32:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85783752 != 85783751 diff = 1)! 2010-Oct-08 01:32:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85783752 != 85783751 diff = 1)! 2010-Oct-08 01:32:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85783752 != 85783751 diff = 1)! 2010-Oct-08 01:32:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85798352 != 85798351 diff = 1)! 2010-Oct-08 01:32:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85798352 != 85798351 diff = 1)! 2010-Oct-08 01:32:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85798352 != 85798351 diff = 1)! 2010-Oct-08 01:32:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85798352 != 85798351 diff = 1)! 2010-Oct-08 01:32:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85798352 != 85798351 diff = 1)! 2010-Oct-08 01:32:35 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 55477.230937 to 55477.230949! 2010-Oct-08 01:32:36 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (55477.230937 - 55477.230961)! 2010-Oct-08 01:32:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764115 != 85764116 diff = 1)! 2010-Oct-08 01:32:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764115 != 85764116 diff = 1)! 2010-Oct-08 01:32:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764115 != 85764116 diff = 1)! 2010-Oct-08 01:32:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764115 != 85764116 diff = 1)! 2010-Oct-08 01:33:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85790996 != 85790995 diff = 1)! 2010-Oct-08 01:33:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85790996 != 85790995 diff = 1)! 2010-Oct-08 01:33:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85790996 != 85790995 diff = 1)! 2010-Oct-08 01:33:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85790996 != 85790995 diff = 1)! 2010-Oct-08 01:33:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85790996 != 85790995 diff = 1)! 2010-Oct-08 01:33:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85790996 != 85790995 diff = 1)! 2010-Oct-08 01:33:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 01:33:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 01:33:41 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2010-Oct-08 01:33:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 01:33:41 LOG5 end_task: Level: (2) ID = <10068> Status = 0 0 0 0 ok 2010-Oct-08 01:33:41 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2010-Oct-08 01:33:41 START begin_task: Starting task 'WAPP calibration' 2010-Oct-08 01:33:41 LOG5 begin_task: Level: (2) ID = <10070> Status = 0 0 0 0 ok 2010-Oct-08 01:33:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Oct-08 01:33:41 START begin_task: Starting task 'selecting calibration type' 2010-Oct-08 01:33:41 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-Oct-08 01:33:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-08 01:33:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-08 01:33:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:33:41 START begin_task: Starting task 'waiting on setcal' 2010-Oct-08 01:33:41 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-Oct-08 01:33:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-08 01:33:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:33:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:33:41 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 01:33:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-08 01:33:41 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-Oct-08 01:33:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-08 01:33:41 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-08 01:33:41 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-Oct-08 01:33:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Oct-08 01:33:41 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Oct-08 01:33:41 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Oct-08 01:33:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-08 01:33:41 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-Oct-08 01:33:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:33:41 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-08 01:33:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Oct-08 01:33:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-08 01:33:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-08 01:33:41 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-Oct-08 01:33:42 LOG4 take_data: Calling 'take_data 10 10 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Oct-08 01:33:42 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 01:33:42 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2010-Oct-08 01:33:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Oct-08 01:33:42 INFO2 take_data: Starting WAPP 10-second scan: 28100007 2010-Oct-08 01:33:42 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 01:33:42 LOG5 begin_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2010-Oct-08 01:33:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 01:33:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Oct-08 01:33:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20023.00 2010-Oct-08 01:33:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11381.162788 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 01:33:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.162788 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:33:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.162788 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:33:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.162788 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:33:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.162788 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:33:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 01:33:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 01:33:53 LOG5 end_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2010-Oct-08 01:33:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 01:33:53 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2010-Oct-08 01:33:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Oct-08 01:33:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Oct-08 01:33:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Oct-08 01:33:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-08 01:33:53 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2010-Oct-08 01:33:53 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-08 01:33:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Oct-08 01:33:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-08 01:33:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-08 01:33:53 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2010-Oct-08 01:33:53 LOG4 take_data: Calling 'take_data 10 10 CAL OFF stat_cal_off {CAL-OFF spectra}' 2010-Oct-08 01:33:53 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 01:33:53 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-Oct-08 01:33:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2010-Oct-08 01:33:53 INFO2 take_data: Starting WAPP 10-second scan: 28100008 2010-Oct-08 01:33:54 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 01:33:54 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2010-Oct-08 01:33:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 01:33:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2010-Oct-08 01:33:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20035.00 2010-Oct-08 01:34:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11381.162788 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 01:34:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.162788 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:34:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.162788 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:34:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.162788 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:34:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.162788 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:34:05 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2010-Oct-08 01:34:05 INFO1 WAPP=2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 01:34:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 01:34:05 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2010-Oct-08 01:34:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 01:34:05 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-Oct-08 01:34:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-08 01:34:05 STOP finish_task: Finishing task 'WAPP calibration' 2010-Oct-08 01:34:05 LOG5 finish_task: Level: (2) ID = <10070> Status = 0 0 0 0 ok 2010-Oct-08 01:34:05 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Oct-08 01:34:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:34:05 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Oct-08 01:34:05 LOG5 end_task: Level: (2) ID = <10070> Status = 0 0 0 0 ok 2010-Oct-08 01:34:05 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-08 01:34:05 LOG5 begin_task: Level: (2) ID = <10079> Status = 0 0 0 0 ok 2010-Oct-08 01:34:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-08 01:34:05 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-08 01:34:05 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023751+262746" 2010-Oct-08 01:34:05 LOG3 vw_send: To DATATAKING: pnt tr 23751.290000 262746.140000 -CJ 2010-Oct-08 01:34:05 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-08 01:34:05 LOG5 finish_task: Level: (2) ID = <10079> Status = 0 0 0 0 ok 2010-Oct-08 01:34:05 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-08 01:34:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:34:05 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-08 01:34:05 LOG5 end_task: Level: (2) ID = <10079> Status = 0 0 0 0 ok 2010-Oct-08 01:34:05 STOP finish_task: Finishing task 'standard on/off' 2010-Oct-08 01:34:05 LOG5 finish_task: Level: (1) ID = <10049> Status = 0 0 0 0 ok 2010-Oct-08 01:34:05 DONE finish_task: DONE finished pattern: standard on/off 2010-Oct-08 01:34:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-08 01:34:05 END end_task: Finishing task 'standard on/off' with status 'OK' 2010-Oct-08 01:34:05 LOG5 end_task: Level: (1) ID = <10049> Status = 0 0 0 0 ok 2010-Oct-08 01:34:05 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023751+262746" 2010-Oct-08 01:34:05 INFO1 WAPP=1-start_spectra: DONE with spectral line observation 2010-Oct-08 01:34:06 LOG4 got_cormsg: From DATATAKING: pnt tr 23751.290000 262746.140000 -CJ 2010-Oct-08 01:34:06 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 01:34:11 COMMAND CIMA-send_to_exec: Sending command to point to a source 2010-Oct-08 01:34:11 LOG4 exec_msg: From OBSERVER: track_new_source j023154+254620 023153.73 254619.66 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 15334 Topocentric velocity(optical) 0 0 0.0 0.0 0 2010-Oct-08 01:34:11 LOG1 track_new_source: Calling 'track_new_source j023154+254620 023153.73 254619.66 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 15334 Topocentric velocity(optical) 0 0 0.0 0.0 0' 2010-Oct-08 01:34:11 BEGIN begin_task: Starting task 'selecting new source' 2010-Oct-08 01:34:11 LOG5 begin_task: Level: (1) ID = <10080> Status = 0 0 0 0 ok 2010-Oct-08 01:34:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {j023154+254620} INFO {Selecting source 'j023154+254620' ...} 2010-Oct-08 01:34:11 LOG3 track_source: Calling 'track_source j023154+254620 023153.73 254619.66 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 15334 Topocentric velocity(optical)' 2010-Oct-08 01:34:11 START begin_task: Starting task 'sending tracking commands' 2010-Oct-08 01:34:11 LOG5 begin_task: Level: (2) ID = <10081> Status = 0 0 0 0 ok 2010-Oct-08 01:34:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {j023154+254620} INFO {Slewing to source 'j023154+254620' ...} 2010-Oct-08 01:34:11 INFO1 track_source: Starting to track j023154+254620 2010-Oct-08 01:34:11 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023154+254620" 2010-Oct-08 01:34:11 LOG3 vw_send: To DATATAKING: set ra 023153.73 2010-Oct-08 01:34:11 LOG3 vw_send: To DATATAKING: set dec 254619.66 2010-Oct-08 01:34:11 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Oct-08 01:34:11 LOG3 vw_send: To DATATAKING: pnt tr 023153.73 254619.66 -CJ 2010-Oct-08 01:34:11 LOG3 vw_send: To DATATAKING: dopsetvel 15334 topo 2010-Oct-08 01:34:11 STOP finish_task: Finishing task 'sending tracking commands' 2010-Oct-08 01:34:11 LOG5 finish_task: Level: (2) ID = <10081> Status = 0 0 0 0 ok 2010-Oct-08 01:34:11 INFO2 finish_task: DONE finished sending: tracking commands 2010-Oct-08 01:34:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:34:12 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Oct-08 01:34:12 LOG5 end_task: Level: (2) ID = <10081> Status = 0 0 0 0 ok 2010-Oct-08 01:34:12 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2010-Oct-08 01:34:12 START begin_task: Starting task 'applying pointing corrections' 2010-Oct-08 01:34:12 LOG5 begin_task: Level: (2) ID = <10082> Status = 0 0 0 0 ok 2010-Oct-08 01:34:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2010-Oct-08 01:34:12 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-08 01:34:12 STOP finish_task: Finishing task 'applying pointing corrections' 2010-Oct-08 01:34:12 LOG5 finish_task: Level: (2) ID = <10082> Status = 0 0 0 0 ok 2010-Oct-08 01:34:12 INFO2 finish_task: DONE finished applying: pointing corrections 2010-Oct-08 01:34:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:34:12 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2010-Oct-08 01:34:12 LOG5 end_task: Level: (2) ID = <10082> Status = 0 0 0 0 ok 2010-Oct-08 01:34:12 STOP finish_task: Finishing task 'selecting new source' 2010-Oct-08 01:34:12 LOG5 finish_task: Level: (1) ID = <10080> Status = 0 0 0 0 ok 2010-Oct-08 01:34:12 DONE finish_task: DONE finished selecting: new source 2010-Oct-08 01:34:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-08 01:34:12 END end_task: Finishing task 'selecting new source' with status 'OK' 2010-Oct-08 01:34:12 LOG5 end_task: Level: (1) ID = <10080> Status = 0 0 0 0 ok 2010-Oct-08 01:34:12 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023154+254620" 2010-Oct-08 01:34:12 LOG4 got_cormsg: From DATATAKING: set ra 023153.73 2010-Oct-08 01:34:12 LOG4 got_cormsg: From DATATAKING: set dec 254619.66 2010-Oct-08 01:34:12 LOG4 got_cormsg: From DATATAKING: vw% 023153.73 2010-Oct-08 01:34:12 LOG4 got_cormsg: From DATATAKING: vw% 254619.66 2010-Oct-08 01:34:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:34:12 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Oct-08 01:34:12 LOG4 got_cormsg: From DATATAKING: pnt tr 023153.73 254619.66 -CJ 2010-Oct-08 01:34:12 LOG4 got_cormsg: From DATATAKING: dopsetvel 15334 topo 2010-Oct-08 01:34:12 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 01:34:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:34:12 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-08 01:34:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:34:13 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2010-Oct-08 01:34:13 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 off lcorcal each first one 2010-Oct-08 01:34:13 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 off lcorcal each first one' 2010-Oct-08 01:34:13 BEGIN begin_task: Starting task 'standard on/off' 2010-Oct-08 01:34:13 LOG5 begin_task: Level: (1) ID = <10083> Status = 0 0 0 0 ok 2010-Oct-08 01:34:13 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'j023154+254620' 2010-Oct-08 01:34:13 INFO1 onoff_wapp: Starting pattern: Standard on/off 2010-Oct-08 01:34:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2010-Oct-08 01:34:13 START begin_task: Starting task 'waiting on telescope' 2010-Oct-08 01:34:13 LOG5 begin_task: Level: (2) ID = <10084> Status = 0 0 0 0 ok 2010-Oct-08 01:34:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-08 01:34:13 LOG3 waittrk: Start waittrk 5 2010-Oct-08 01:34:13 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-08 01:34:13 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2010-Oct-08 01:34:18 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-08 01:34:18 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2010-Oct-08 01:34:18 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-08 01:34:18 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-Oct-08 01:35:09 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-08 01:35:09 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-Oct-08 01:35:09 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-08 01:35:09 INFO2 waittrk: Now tracking j023154+254620 2010-Oct-08 01:35:09 LOG4 waittrk: Current telescope position: Az = 207.23 ZA = 8.48 2010-Oct-08 01:35:09 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-08 01:35:09 LOG5 finish_task: Level: (2) ID = <10084> Status = 0 0 0 0 ok 2010-Oct-08 01:35:09 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-08 01:35:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:35:09 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-08 01:35:09 LOG5 end_task: Level: (2) ID = <10084> Status = 0 0 0 0 ok 2010-Oct-08 01:35:09 START begin_task: Starting task 'selecting calibration type' 2010-Oct-08 01:35:09 LOG5 begin_task: Level: (2) ID = <10087> Status = 0 0 0 0 ok 2010-Oct-08 01:35:09 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-08 01:35:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-08 01:35:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:35:09 START begin_task: Starting task 'waiting on setcal' 2010-Oct-08 01:35:09 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-Oct-08 01:35:09 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-08 01:35:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:35:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:35:09 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 01:35:09 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-08 01:35:09 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-Oct-08 01:35:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-08 01:35:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-08 01:35:09 LOG5 end_task: Level: (2) ID = <10087> Status = 0 0 0 0 ok 2010-Oct-08 01:35:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2010-Oct-08 01:35:10 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2010-Oct-08 01:35:10 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2010-Oct-08 01:35:10 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2010-Oct-08 01:35:10 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2010-Oct-08 01:35:10 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2010-Oct-08 01:35:10 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-08 01:35:10 LOG5 begin_task: Level: (2) ID = <10089> Status = 0 0 0 0 ok 2010-Oct-08 01:35:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-08 01:35:10 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-08 01:35:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023154+254620" 2010-Oct-08 01:35:10 LOG3 vw_send: To DATATAKING: pnt tr 23153.730000 254619.660000 -CJ 2010-Oct-08 01:35:10 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-08 01:35:10 LOG5 finish_task: Level: (2) ID = <10089> Status = 0 0 0 0 ok 2010-Oct-08 01:35:10 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-08 01:35:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:35:10 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-08 01:35:10 LOG5 end_task: Level: (2) ID = <10089> Status = 0 0 0 0 ok 2010-Oct-08 01:35:10 START begin_task: Starting task 'waiting on telescope' 2010-Oct-08 01:35:10 LOG5 begin_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2010-Oct-08 01:35:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-08 01:35:10 LOG3 waittrk: Start waittrk 5 2010-Oct-08 01:35:10 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-08 01:35:10 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2010-Oct-08 01:35:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2010-Oct-08 01:35:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:35:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023154+254620" 2010-Oct-08 01:35:10 LOG4 got_cormsg: From DATATAKING: pnt tr 23153.730000 254619.660000 -CJ 2010-Oct-08 01:35:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 01:35:10 NOTE WAPPDATA-new_file: New FITS file: wapp.20101008.a2048.0002.fits 2010-Oct-08 01:35:10 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20101008.a2048.0002.fits} 2010-Oct-08 01:35:15 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-08 01:35:15 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2010-Oct-08 01:35:15 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-08 01:35:15 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-Oct-08 01:35:17 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-08 01:35:17 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-Oct-08 01:35:17 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-08 01:35:17 INFO2 waittrk: Now tracking j023154+254620 2010-Oct-08 01:35:17 LOG4 waittrk: Current telescope position: Az = 207.05 ZA = 8.47 2010-Oct-08 01:35:17 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-08 01:35:17 LOG5 finish_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2010-Oct-08 01:35:17 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-08 01:35:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:35:17 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-08 01:35:17 LOG5 end_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2010-Oct-08 01:35:17 LOG5 antvel: Calling 'antvel 23153.730000 254619.660000 J Topocentric 0' 2010-Oct-08 01:35:17 LOG2 antvel: Precessing RA = 02:31:53.7 Dec = +25:46:19.7 Epoch = 2010.76952 J 2010-Oct-08 01:35:17 LOG2 antvel: Computed apparent RA = 02:32:33.5 Dec = +25:49:19.9 2010-Oct-08 01:35:17 LOG2 antvel: Parameters to Doppler: Topocentric 20117 2010 281 0.0 2010-Oct-08 01:35:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Oct-08 01:35:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=15334.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-Oct-08 01:35:17 INFO4 dopset_gen: New sky frequencies: 1351.289049 1351.289049 1351.289049 1351.289049 1351.289049 1351.289049 1351.289049 1351.289049 1351.289049 2010-Oct-08 01:35:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1351.289049 sky0=1351.289049 sky1=1351.289049 sky2=1351.289049 sky3=1351.289049 sky4=1351.289049 sky5=1351.289049 sky6=1351.289049 sky7=1351.289049 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2010-Oct-08 01:35:17 LOG2 dopset_gen: Result from 'sky2syn': 11351.289049 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2010-Oct-08 01:35:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11351289049.0} 2010-Oct-08 01:35:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-08 01:35:17 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-08 01:35:17 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2010-Oct-08 01:35:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Oct-08 01:35:17 INFO2 adjust_power: Starting to adjust WAPP power 2010-Oct-08 01:35:17 LOG3 vw_send: To DATATAKING: adjpwrif1 2010-Oct-08 01:35:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2010-Oct-08 01:35:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:35:17 START begin_task: Starting task 'waiting on adjpwrif1' 2010-Oct-08 01:35:17 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-Oct-08 01:35:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11351289049.0} 2010-Oct-08 01:35:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-08 01:35:17 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2010-Oct-08 01:35:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:35:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:35:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:35:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:35:18 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 01:35:18 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2010-Oct-08 01:35:18 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-Oct-08 01:35:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2010-Oct-08 01:35:18 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Oct-08 01:35:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Oct-08 01:35:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:35:18 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Oct-08 01:35:18 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2010-Oct-08 01:35:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:35:18 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Oct-08 01:35:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:35:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:35:18 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 01:35:18 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Oct-08 01:35:18 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2010-Oct-08 01:35:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Oct-08 01:35:18 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-08 01:35:18 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-Oct-08 01:35:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Oct-08 01:35:18 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2010-Oct-08 01:35:18 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2010-Oct-08 01:35:18 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2010-Oct-08 01:35:18 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2010-Oct-08 01:35:18 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Oct-08 01:35:18 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2010-Oct-08 01:35:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:35:19 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 13 12 dB 2010-Oct-08 01:35:19 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2010-Oct-08 01:35:19 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2010-Oct-08 01:35:19 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2010-Oct-08 01:35:19 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2010-Oct-08 01:35:19 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 15 0 dB 2010-Oct-08 01:35:19 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 2 13 dB 2010-Oct-08 01:35:19 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 3 15 dB 2010-Oct-08 01:35:19 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Oct-08 01:35:19 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Oct-08 01:35:19 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2010-Oct-08 01:35:19 INFO2 wapp_adjpwr: WAPP power: 1.077 1.023 1.259 1.481 2010-Oct-08 01:35:19 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-08 01:35:19 LOG5 finish_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-Oct-08 01:35:19 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Oct-08 01:35:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:35:19 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-08 01:35:19 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-Oct-08 01:35:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-08 01:35:19 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-08 01:35:19 LOG5 finish_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2010-Oct-08 01:35:19 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Oct-08 01:35:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:35:19 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-08 01:35:19 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2010-Oct-08 01:35:19 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON stat_onoff_on {ON scan}' 2010-Oct-08 01:35:19 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 01:35:19 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2010-Oct-08 01:35:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for ON scan ...} 2010-Oct-08 01:35:19 INFO2 take_data: Starting WAPP 300-second scan: 28100009 2010-Oct-08 01:35:19 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 01:35:19 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2010-Oct-08 01:35:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 01:35:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2010-Oct-08 01:35:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20120.00 2010-Oct-08 01:35:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11351.289049 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 01:35:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:35:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:35:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:35:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:35:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85787994 != 85787993 diff = 1)! 2010-Oct-08 01:35:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85787994 != 85787993 diff = 1)! 2010-Oct-08 01:35:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85787994 != 85787993 diff = 1)! 2010-Oct-08 01:35:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85787994 != 85787993 diff = 1)! 2010-Oct-08 01:35:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764074 != 85764073 diff = 1)! 2010-Oct-08 01:35:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764074 != 85764073 diff = 1)! 2010-Oct-08 01:35:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764074 != 85764073 diff = 1)! 2010-Oct-08 01:35:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764074 != 85764073 diff = 1)! 2010-Oct-08 01:35:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764074 != 85764073 diff = 1)! 2010-Oct-08 01:35:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764074 != 85764073 diff = 1)! 2010-Oct-08 01:35:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764074 != 85764073 diff = 1)! 2010-Oct-08 01:35:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764074 != 85764073 diff = 1)! 2010-Oct-08 01:35:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804174 != 85804173 diff = 1)! 2010-Oct-08 01:35:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804174 != 85804173 diff = 1)! 2010-Oct-08 01:35:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804174 != 85804173 diff = 1)! 2010-Oct-08 01:35:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804182 != 85804181 diff = 1)! 2010-Oct-08 01:35:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804182 != 85804181 diff = 1)! 2010-Oct-08 01:35:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804182 != 85804181 diff = 1)! 2010-Oct-08 01:35:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804182 != 85804181 diff = 1)! 2010-Oct-08 01:35:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85771185 != 85771186 diff = 1)! 2010-Oct-08 01:35:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85771185 != 85771186 diff = 1)! 2010-Oct-08 01:35:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85771185 != 85771186 diff = 1)! 2010-Oct-08 01:35:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85771185 != 85771186 diff = 1)! 2010-Oct-08 01:35:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85771185 != 85771186 diff = 1)! 2010-Oct-08 01:35:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85771185 != 85771186 diff = 1)! 2010-Oct-08 01:36:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804164 != 85804163 diff = 1)! 2010-Oct-08 01:36:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804164 != 85804163 diff = 1)! 2010-Oct-08 01:36:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804164 != 85804163 diff = 1)! 2010-Oct-08 01:36:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804164 != 85804163 diff = 1)! 2010-Oct-08 01:36:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804164 != 85804163 diff = 1)! 2010-Oct-08 01:36:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804164 != 85804163 diff = 1)! 2010-Oct-08 01:36:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804164 != 85804163 diff = 1)! 2010-Oct-08 01:36:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85772068 != 85772067 diff = 1)! 2010-Oct-08 01:36:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85772068 != 85772067 diff = 1)! 2010-Oct-08 01:36:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764108 != 85764107 diff = 1)! 2010-Oct-08 01:36:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764090 != 85764089 diff = 1)! 2010-Oct-08 01:36:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764090 != 85764089 diff = 1)! 2010-Oct-08 01:36:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764090 != 85764089 diff = 1)! 2010-Oct-08 01:36:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764090 != 85764089 diff = 1)! 2010-Oct-08 01:36:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764090 != 85764089 diff = 1)! 2010-Oct-08 01:36:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764090 != 85764089 diff = 1)! 2010-Oct-08 01:36:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764090 != 85764089 diff = 1)! 2010-Oct-08 01:36:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764090 != 85764089 diff = 1)! 2010-Oct-08 01:36:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804172 != 85804171 diff = 1)! 2010-Oct-08 01:36:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86044860 != 86044859 diff = 1)! 2010-Oct-08 01:36:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86044860 != 86044859 diff = 1)! 2010-Oct-08 01:36:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86044860 != 86044859 diff = 1)! 2010-Oct-08 01:36:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86044860 != 86044859 diff = 1)! 2010-Oct-08 01:37:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804170 != 85804169 diff = 1)! 2010-Oct-08 01:37:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:37:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:37:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764092 != 85764091 diff = 1)! 2010-Oct-08 01:38:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764075 != 85764076 diff = 1)! 2010-Oct-08 01:38:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764075 != 85764076 diff = 1)! 2010-Oct-08 01:38:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85764075 != 85764076 diff = 1)! 2010-Oct-08 01:38:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764075 != 85764076 diff = 1)! 2010-Oct-08 01:38:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804193 != 85804194 diff = 1)! 2010-Oct-08 01:38:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804193 != 85804194 diff = 1)! 2010-Oct-08 01:38:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804193 != 85804194 diff = 1)! 2010-Oct-08 01:38:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804193 != 85804194 diff = 1)! 2010-Oct-08 01:38:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764098 != 85764097 diff = 1)! 2010-Oct-08 01:38:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764098 != 85764097 diff = 1)! 2010-Oct-08 01:38:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764098 != 85764097 diff = 1)! 2010-Oct-08 01:38:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764098 != 85764097 diff = 1)! 2010-Oct-08 01:38:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764098 != 85764097 diff = 1)! 2010-Oct-08 01:38:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764098 != 85764097 diff = 1)! 2010-Oct-08 01:38:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764098 != 85764097 diff = 1)! 2010-Oct-08 01:38:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764098 != 85764097 diff = 1)! 2010-Oct-08 01:38:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85800510 != 85800509 diff = 1)! 2010-Oct-08 01:38:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85800510 != 85800509 diff = 1)! 2010-Oct-08 01:38:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85800510 != 85800509 diff = 1)! 2010-Oct-08 01:38:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85800510 != 85800509 diff = 1)! 2010-Oct-08 01:38:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85800510 != 85800509 diff = 1)! 2010-Oct-08 01:38:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85800510 != 85800509 diff = 1)! 2010-Oct-08 01:38:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85800510 != 85800509 diff = 1)! 2010-Oct-08 01:38:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764074 != 85764072 diff = 2)! 2010-Oct-08 01:38:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764074 != 85764072 diff = 2)! 2010-Oct-08 01:38:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764074 != 85764072 diff = 2)! 2010-Oct-08 01:38:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764074 != 85764072 diff = 2)! 2010-Oct-08 01:38:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764074 != 85764072 diff = 2)! 2010-Oct-08 01:38:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764074 != 85764073 diff = 1)! 2010-Oct-08 01:38:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764074 != 85764073 diff = 1)! 2010-Oct-08 01:38:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764068 != 85764067 diff = 1)! 2010-Oct-08 01:38:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764068 != 85764067 diff = 1)! 2010-Oct-08 01:38:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764068 != 85764067 diff = 1)! 2010-Oct-08 01:38:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764068 != 85764067 diff = 1)! 2010-Oct-08 01:38:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764068 != 85764067 diff = 1)! 2010-Oct-08 01:38:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764068 != 85764067 diff = 1)! 2010-Oct-08 01:39:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764072 != 85764071 diff = 1)! 2010-Oct-08 01:39:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764072 != 85764071 diff = 1)! 2010-Oct-08 01:39:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764072 != 85764071 diff = 1)! 2010-Oct-08 01:39:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764072 != 85764071 diff = 1)! 2010-Oct-08 01:39:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764072 != 85764071 diff = 1)! 2010-Oct-08 01:39:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764072 != 85764071 diff = 1)! 2010-Oct-08 01:39:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764072 != 85764071 diff = 1)! 2010-Oct-08 01:39:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764070 != 85764069 diff = 1)! 2010-Oct-08 01:39:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764070 != 85764069 diff = 1)! 2010-Oct-08 01:39:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764070 != 85764069 diff = 1)! 2010-Oct-08 01:39:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764070 != 85764069 diff = 1)! 2010-Oct-08 01:39:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764070 != 85764069 diff = 1)! 2010-Oct-08 01:39:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764070 != 85764069 diff = 1)! 2010-Oct-08 01:39:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764070 != 85764069 diff = 1)! 2010-Oct-08 01:39:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764070 != 85764069 diff = 1)! 2010-Oct-08 01:39:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764077 != 85764078 diff = 1)! 2010-Oct-08 01:39:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764077 != 85764078 diff = 1)! 2010-Oct-08 01:39:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804178 != 85804177 diff = 1)! 2010-Oct-08 01:39:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764081 != 85764080 diff = 1)! 2010-Oct-08 01:39:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764081 != 85764080 diff = 1)! 2010-Oct-08 01:39:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764081 != 85764080 diff = 1)! 2010-Oct-08 01:39:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764081 != 85764080 diff = 1)! 2010-Oct-08 01:39:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86245318 != 86245317 diff = 1)! 2010-Oct-08 01:39:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86245318 != 86245317 diff = 1)! 2010-Oct-08 01:39:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86245318 != 86245317 diff = 1)! 2010-Oct-08 01:39:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86245318 != 86245317 diff = 1)! 2010-Oct-08 01:39:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (86245318 != 86245317 diff = 1)! 2010-Oct-08 01:39:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804200 != 85804199 diff = 1)! 2010-Oct-08 01:39:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764085 != 85764086 diff = 1)! 2010-Oct-08 01:39:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764085 != 85764086 diff = 1)! 2010-Oct-08 01:39:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764085 != 85764086 diff = 1)! 2010-Oct-08 01:39:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804172 != 85804171 diff = 1)! 2010-Oct-08 01:39:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804172 != 85804171 diff = 1)! 2010-Oct-08 01:39:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804172 != 85804171 diff = 1)! 2010-Oct-08 01:40:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804184 != 85804183 diff = 1)! 2010-Oct-08 01:40:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804184 != 85804183 diff = 1)! 2010-Oct-08 01:40:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804184 != 85804183 diff = 1)! 2010-Oct-08 01:40:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804184 != 85804183 diff = 1)! 2010-Oct-08 01:40:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804184 != 85804183 diff = 1)! 2010-Oct-08 01:40:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804184 != 85804183 diff = 1)! 2010-Oct-08 01:40:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804184 != 85804183 diff = 1)! 2010-Oct-08 01:40:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 01:40:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 01:40:20 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2010-Oct-08 01:40:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 01:40:20 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2010-Oct-08 01:40:20 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2010-Oct-08 01:40:20 LOG2 onoff_wapp: Parameters: RA-offset: -90.707099999999855 arcminutes wait: 60 secs 2010-Oct-08 01:40:20 LOG4 track_offsets: Calling 'track_offsets -90.707099999999855 0.0 main small' 2010-Oct-08 01:40:20 START begin_task: Starting task 'sending telescope offsets' 2010-Oct-08 01:40:20 LOG5 begin_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2010-Oct-08 01:40:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2010-Oct-08 01:40:20 INFO2 track_offsets: Starting to send new offsets 2010-Oct-08 01:40:20 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023154+254620" 2010-Oct-08 01:40:20 LOG3 vw_send: To DATATAKING: pnt tr 23153.730000 254619.660000 -CJ -o -UD -1.51178 0.0 -CH 2010-Oct-08 01:40:20 STOP finish_task: Finishing task 'sending telescope offsets' 2010-Oct-08 01:40:20 LOG5 finish_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2010-Oct-08 01:40:20 INFO2 finish_task: DONE finished sending: telescope offsets 2010-Oct-08 01:40:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:40:20 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2010-Oct-08 01:40:20 LOG5 end_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2010-Oct-08 01:40:20 INFO2 lstwait: Waiting for 59.8 secs from LST 02:20:20 to LST 02:21:20 ... 2010-Oct-08 01:40:20 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836175999999789 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Oct-08 01:40:20 START begin_task: Starting task 'waiting on wait on LST' 2010-Oct-08 01:40:20 LOG5 begin_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2010-Oct-08 01:40:20 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023154+254620" 2010-Oct-08 01:40:20 LOG4 got_cormsg: From DATATAKING: pnt tr 23153.730000 254619.660000 -CJ -o -UD -1.51178 0.0 -CH 2010-Oct-08 01:40:20 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 01:40:56 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'j023154+254620' (after 36 seconds) 2010-Oct-08 01:40:56 LOG3 wait_and_tell_when_on_source: The telescope arrived at source with 24 seconds to spare (36 < 60 seconds) 2010-Oct-08 01:41:20 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-Oct-08 01:41:20 LOG5 end_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2010-Oct-08 01:41:20 LOG4 lstwait: Finished waiting 0.16 seconds late 2010-Oct-08 01:41:20 INFO3 lstwait: Finished waiting 2010-Oct-08 01:41:20 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Oct-08 01:41:20 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF stat_onoff_off {OFF scan}' 2010-Oct-08 01:41:20 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 01:41:20 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2010-Oct-08 01:41:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for OFF scan ...} 2010-Oct-08 01:41:20 INFO2 take_data: Starting WAPP 300-second scan: 28100010 2010-Oct-08 01:41:21 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 01:41:21 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2010-Oct-08 01:41:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 01:41:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2010-Oct-08 01:41:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20482.00 2010-Oct-08 01:41:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11351.289049 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 01:41:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:41:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:41:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:41:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:41:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764066 != 85764065 diff = 1)! 2010-Oct-08 01:41:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764066 != 85764065 diff = 1)! 2010-Oct-08 01:41:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764066 != 85764065 diff = 1)! 2010-Oct-08 01:41:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764066 != 85764065 diff = 1)! 2010-Oct-08 01:41:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764066 != 85764065 diff = 1)! 2010-Oct-08 01:41:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804176 != 85804175 diff = 1)! 2010-Oct-08 01:42:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85787112 != 85787111 diff = 1)! 2010-Oct-08 01:42:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804164 != 85804163 diff = 1)! 2010-Oct-08 01:42:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764054 != 85764053 diff = 1)! 2010-Oct-08 01:42:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764054 != 85764053 diff = 1)! 2010-Oct-08 01:42:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764054 != 85764053 diff = 1)! 2010-Oct-08 01:42:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764054 != 85764053 diff = 1)! 2010-Oct-08 01:42:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764054 != 85764053 diff = 1)! 2010-Oct-08 01:42:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764054 != 85764053 diff = 1)! 2010-Oct-08 01:42:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764054 != 85764053 diff = 1)! 2010-Oct-08 01:43:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804189 != 85804190 diff = 1)! 2010-Oct-08 01:43:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804189 != 85804190 diff = 1)! 2010-Oct-08 01:43:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804189 != 85804190 diff = 1)! 2010-Oct-08 01:43:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804189 != 85804190 diff = 1)! 2010-Oct-08 01:43:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764110 != 85764109 diff = 1)! 2010-Oct-08 01:43:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764073 != 85764074 diff = 1)! 2010-Oct-08 01:43:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85777906 != 85777905 diff = 1)! 2010-Oct-08 01:43:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85769504 != 85769503 diff = 1)! 2010-Oct-08 01:43:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85769504 != 85769503 diff = 1)! 2010-Oct-08 01:43:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85769504 != 85769503 diff = 1)! 2010-Oct-08 01:43:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85769504 != 85769503 diff = 1)! 2010-Oct-08 01:44:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804174 != 85804173 diff = 1)! 2010-Oct-08 01:44:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804174 != 85804173 diff = 1)! 2010-Oct-08 01:44:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804174 != 85804173 diff = 1)! 2010-Oct-08 01:44:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804174 != 85804173 diff = 1)! 2010-Oct-08 01:44:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804174 != 85804173 diff = 1)! 2010-Oct-08 01:44:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804174 != 85804173 diff = 1)! 2010-Oct-08 01:44:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804172 != 85804171 diff = 1)! 2010-Oct-08 01:44:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804172 != 85804171 diff = 1)! 2010-Oct-08 01:44:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804172 != 85804171 diff = 1)! 2010-Oct-08 01:44:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804172 != 85804171 diff = 1)! 2010-Oct-08 01:44:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804172 != 85804171 diff = 1)! 2010-Oct-08 01:44:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85773186 != 85773185 diff = 1)! 2010-Oct-08 01:44:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85773186 != 85773185 diff = 1)! 2010-Oct-08 01:44:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85773186 != 85773185 diff = 1)! 2010-Oct-08 01:44:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85773186 != 85773185 diff = 1)! 2010-Oct-08 01:44:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85773186 != 85773185 diff = 1)! 2010-Oct-08 01:44:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85773186 != 85773185 diff = 1)! 2010-Oct-08 01:44:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85773186 != 85773185 diff = 1)! 2010-Oct-08 01:45:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804184 != 85804183 diff = 1)! 2010-Oct-08 01:45:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804184 != 85804183 diff = 1)! 2010-Oct-08 01:45:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804184 != 85804183 diff = 1)! 2010-Oct-08 01:45:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804184 != 85804183 diff = 1)! 2010-Oct-08 01:45:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804184 != 85804183 diff = 1)! 2010-Oct-08 01:45:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804178 != 85804177 diff = 1)! 2010-Oct-08 01:45:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804178 != 85804177 diff = 1)! 2010-Oct-08 01:45:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804178 != 85804177 diff = 1)! 2010-Oct-08 01:45:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804178 != 85804177 diff = 1)! 2010-Oct-08 01:45:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804178 != 85804177 diff = 1)! 2010-Oct-08 01:45:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804178 != 85804177 diff = 1)! 2010-Oct-08 01:45:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804178 != 85804177 diff = 1)! 2010-Oct-08 01:45:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804160 != 85804158 diff = 2)! 2010-Oct-08 01:45:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804160 != 85804158 diff = 2)! 2010-Oct-08 01:45:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804160 != 85804158 diff = 2)! 2010-Oct-08 01:45:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804160 != 85804158 diff = 2)! 2010-Oct-08 01:45:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804160 != 85804158 diff = 2)! 2010-Oct-08 01:45:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804160 != 85804158 diff = 2)! 2010-Oct-08 01:45:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804160 != 85804158 diff = 2)! 2010-Oct-08 01:45:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804160 != 85804159 diff = 1)! 2010-Oct-08 01:45:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764054 != 85764053 diff = 1)! 2010-Oct-08 01:45:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764054 != 85764053 diff = 1)! 2010-Oct-08 01:45:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764054 != 85764053 diff = 1)! 2010-Oct-08 01:45:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764079 != 85764078 diff = 1)! 2010-Oct-08 01:45:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764079 != 85764078 diff = 1)! 2010-Oct-08 01:45:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764079 != 85764078 diff = 1)! 2010-Oct-08 01:45:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764079 != 85764078 diff = 1)! 2010-Oct-08 01:45:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764079 != 85764078 diff = 1)! 2010-Oct-08 01:45:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764079 != 85764078 diff = 1)! 2010-Oct-08 01:46:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85924521 != 85924522 diff = 1)! 2010-Oct-08 01:46:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85924521 != 85924522 diff = 1)! 2010-Oct-08 01:46:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 01:46:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 01:46:22 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2010-Oct-08 01:46:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 01:46:22 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2010-Oct-08 01:46:22 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2010-Oct-08 01:46:22 START begin_task: Starting task 'WAPP calibration' 2010-Oct-08 01:46:22 LOG5 begin_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2010-Oct-08 01:46:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Oct-08 01:46:22 START begin_task: Starting task 'selecting calibration type' 2010-Oct-08 01:46:22 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2010-Oct-08 01:46:22 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-08 01:46:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-08 01:46:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:46:22 START begin_task: Starting task 'waiting on setcal' 2010-Oct-08 01:46:22 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2010-Oct-08 01:46:22 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-08 01:46:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:46:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:46:22 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 01:46:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-08 01:46:22 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2010-Oct-08 01:46:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-08 01:46:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-08 01:46:22 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2010-Oct-08 01:46:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Oct-08 01:46:22 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Oct-08 01:46:22 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Oct-08 01:46:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-08 01:46:22 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2010-Oct-08 01:46:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:46:22 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-08 01:46:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Oct-08 01:46:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-08 01:46:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-08 01:46:22 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2010-Oct-08 01:46:22 LOG4 take_data: Calling 'take_data 10 10 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Oct-08 01:46:22 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 01:46:22 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2010-Oct-08 01:46:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Oct-08 01:46:23 INFO2 take_data: Starting WAPP 10-second scan: 28100011 2010-Oct-08 01:46:23 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 01:46:23 LOG5 begin_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2010-Oct-08 01:46:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 01:46:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Oct-08 01:46:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20784.00 2010-Oct-08 01:46:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11351.289049 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 01:46:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:46:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:46:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:46:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:46:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 01:46:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 01:46:34 LOG5 end_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2010-Oct-08 01:46:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 01:46:34 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2010-Oct-08 01:46:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Oct-08 01:46:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Oct-08 01:46:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Oct-08 01:46:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-08 01:46:34 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2010-Oct-08 01:46:34 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-08 01:46:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Oct-08 01:46:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-08 01:46:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-08 01:46:34 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2010-Oct-08 01:46:34 LOG4 take_data: Calling 'take_data 10 10 CAL OFF stat_cal_off {CAL-OFF spectra}' 2010-Oct-08 01:46:34 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 01:46:34 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2010-Oct-08 01:46:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2010-Oct-08 01:46:34 INFO2 take_data: Starting WAPP 10-second scan: 28100012 2010-Oct-08 01:46:35 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 01:46:35 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2010-Oct-08 01:46:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 01:46:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2010-Oct-08 01:46:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20796.00 2010-Oct-08 01:46:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11351.289049 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 01:46:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:46:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:46:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:46:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:46:46 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2010-Oct-08 01:46:46 INFO1 WAPP=2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 01:46:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 01:46:46 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2010-Oct-08 01:46:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 01:46:46 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2010-Oct-08 01:46:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-08 01:46:46 STOP finish_task: Finishing task 'WAPP calibration' 2010-Oct-08 01:46:46 LOG5 finish_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2010-Oct-08 01:46:46 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Oct-08 01:46:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:46:46 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Oct-08 01:46:46 LOG5 end_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2010-Oct-08 01:46:46 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-08 01:46:46 LOG5 begin_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2010-Oct-08 01:46:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-08 01:46:46 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-08 01:46:46 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023154+254620" 2010-Oct-08 01:46:46 LOG3 vw_send: To DATATAKING: pnt tr 23153.730000 254619.660000 -CJ 2010-Oct-08 01:46:46 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-08 01:46:46 LOG5 finish_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2010-Oct-08 01:46:46 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-08 01:46:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:46:46 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-08 01:46:46 LOG5 end_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2010-Oct-08 01:46:46 STOP finish_task: Finishing task 'standard on/off' 2010-Oct-08 01:46:46 LOG5 finish_task: Level: (1) ID = <10083> Status = 0 0 0 0 ok 2010-Oct-08 01:46:46 DONE finish_task: DONE finished pattern: standard on/off 2010-Oct-08 01:46:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-08 01:46:47 END end_task: Finishing task 'standard on/off' with status 'OK' 2010-Oct-08 01:46:47 LOG5 end_task: Level: (1) ID = <10083> Status = 0 0 0 0 ok 2010-Oct-08 01:46:47 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023154+254620" 2010-Oct-08 01:46:47 INFO1 WAPP=1-start_spectra: DONE with spectral line observation 2010-Oct-08 01:46:47 LOG4 got_cormsg: From DATATAKING: pnt tr 23153.730000 254619.660000 -CJ 2010-Oct-08 01:46:47 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 01:46:51 COMMAND CIMA-send_to_exec: Sending command to point to a source 2010-Oct-08 01:46:51 LOG4 exec_msg: From OBSERVER: track_new_source j023525+263944 023525.25 263944.25 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 15939 Topocentric velocity(optical) 0 0 0.0 0.0 0 2010-Oct-08 01:46:51 LOG1 track_new_source: Calling 'track_new_source j023525+263944 023525.25 263944.25 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 15939 Topocentric velocity(optical) 0 0 0.0 0.0 0' 2010-Oct-08 01:46:51 BEGIN begin_task: Starting task 'selecting new source' 2010-Oct-08 01:46:52 LOG5 begin_task: Level: (1) ID = <10114> Status = 0 0 0 0 ok 2010-Oct-08 01:46:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {j023525+263944} INFO {Selecting source 'j023525+263944' ...} 2010-Oct-08 01:46:52 LOG3 track_source: Calling 'track_source j023525+263944 023525.25 263944.25 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 15939 Topocentric velocity(optical)' 2010-Oct-08 01:46:52 START begin_task: Starting task 'sending tracking commands' 2010-Oct-08 01:46:52 LOG5 begin_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2010-Oct-08 01:46:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {j023525+263944} INFO {Slewing to source 'j023525+263944' ...} 2010-Oct-08 01:46:52 INFO1 track_source: Starting to track j023525+263944 2010-Oct-08 01:46:52 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023525+263944" 2010-Oct-08 01:46:52 LOG3 vw_send: To DATATAKING: set ra 023525.25 2010-Oct-08 01:46:52 LOG3 vw_send: To DATATAKING: set dec 263944.25 2010-Oct-08 01:46:52 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Oct-08 01:46:52 LOG3 vw_send: To DATATAKING: pnt tr 023525.25 263944.25 -CJ 2010-Oct-08 01:46:52 LOG3 vw_send: To DATATAKING: dopsetvel 15939 topo 2010-Oct-08 01:46:52 STOP finish_task: Finishing task 'sending tracking commands' 2010-Oct-08 01:46:52 LOG5 finish_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2010-Oct-08 01:46:52 INFO2 finish_task: DONE finished sending: tracking commands 2010-Oct-08 01:46:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:46:52 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Oct-08 01:46:52 LOG5 end_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2010-Oct-08 01:46:52 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2010-Oct-08 01:46:52 START begin_task: Starting task 'applying pointing corrections' 2010-Oct-08 01:46:52 LOG5 begin_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2010-Oct-08 01:46:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2010-Oct-08 01:46:52 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-08 01:46:52 STOP finish_task: Finishing task 'applying pointing corrections' 2010-Oct-08 01:46:52 LOG5 finish_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2010-Oct-08 01:46:52 INFO2 finish_task: DONE finished applying: pointing corrections 2010-Oct-08 01:46:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:46:52 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2010-Oct-08 01:46:52 LOG5 end_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2010-Oct-08 01:46:52 STOP finish_task: Finishing task 'selecting new source' 2010-Oct-08 01:46:52 LOG5 finish_task: Level: (1) ID = <10114> Status = 0 0 0 0 ok 2010-Oct-08 01:46:52 DONE finish_task: DONE finished selecting: new source 2010-Oct-08 01:46:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-08 01:46:52 END end_task: Finishing task 'selecting new source' with status 'OK' 2010-Oct-08 01:46:52 LOG5 end_task: Level: (1) ID = <10114> Status = 0 0 0 0 ok 2010-Oct-08 01:46:52 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023525+263944" 2010-Oct-08 01:46:52 LOG4 got_cormsg: From DATATAKING: set ra 023525.25 2010-Oct-08 01:46:52 LOG4 got_cormsg: From DATATAKING: set dec 263944.25 2010-Oct-08 01:46:52 LOG4 got_cormsg: From DATATAKING: vw% 023525.25 2010-Oct-08 01:46:52 LOG4 got_cormsg: From DATATAKING: vw% 263944.25 2010-Oct-08 01:46:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:46:52 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Oct-08 01:46:52 LOG4 got_cormsg: From DATATAKING: pnt tr 023525.25 263944.25 -CJ 2010-Oct-08 01:46:52 LOG4 got_cormsg: From DATATAKING: dopsetvel 15939 topo 2010-Oct-08 01:46:52 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 01:46:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:46:52 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-08 01:46:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:46:54 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2010-Oct-08 01:46:54 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 off lcorcal each first one 2010-Oct-08 01:46:54 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 off lcorcal each first one' 2010-Oct-08 01:46:54 BEGIN begin_task: Starting task 'standard on/off' 2010-Oct-08 01:46:54 LOG5 begin_task: Level: (1) ID = <10117> Status = 0 0 0 0 ok 2010-Oct-08 01:46:54 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'j023525+263944' 2010-Oct-08 01:46:54 INFO1 onoff_wapp: Starting pattern: Standard on/off 2010-Oct-08 01:46:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2010-Oct-08 01:46:54 START begin_task: Starting task 'waiting on telescope' 2010-Oct-08 01:46:54 LOG5 begin_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2010-Oct-08 01:46:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-08 01:46:55 LOG3 waittrk: Start waittrk 5 2010-Oct-08 01:46:55 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-08 01:46:55 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-Oct-08 01:47:00 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-08 01:47:00 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-Oct-08 01:47:00 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-08 01:47:00 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2010-Oct-08 01:47:27 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-08 01:47:27 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2010-Oct-08 01:47:27 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-08 01:47:27 INFO2 waittrk: Now tracking j023525+263944 2010-Oct-08 01:47:27 LOG4 waittrk: Current telescope position: Az = 192.68 ZA = 8.59 2010-Oct-08 01:47:27 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-08 01:47:27 LOG5 finish_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2010-Oct-08 01:47:27 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-08 01:47:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:47:27 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-08 01:47:27 LOG5 end_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2010-Oct-08 01:47:27 START begin_task: Starting task 'selecting calibration type' 2010-Oct-08 01:47:27 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2010-Oct-08 01:47:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-08 01:47:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-08 01:47:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:47:27 START begin_task: Starting task 'waiting on setcal' 2010-Oct-08 01:47:27 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2010-Oct-08 01:47:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-08 01:47:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:47:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:47:27 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 01:47:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-08 01:47:27 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2010-Oct-08 01:47:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-08 01:47:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-08 01:47:27 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2010-Oct-08 01:47:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2010-Oct-08 01:47:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2010-Oct-08 01:47:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2010-Oct-08 01:47:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2010-Oct-08 01:47:27 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2010-Oct-08 01:47:27 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2010-Oct-08 01:47:27 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-08 01:47:27 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2010-Oct-08 01:47:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-08 01:47:28 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-08 01:47:28 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023525+263944" 2010-Oct-08 01:47:28 LOG3 vw_send: To DATATAKING: pnt tr 23525.250000 263944.250000 -CJ 2010-Oct-08 01:47:28 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-08 01:47:28 LOG5 finish_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2010-Oct-08 01:47:28 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-08 01:47:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:47:28 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-08 01:47:28 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2010-Oct-08 01:47:28 START begin_task: Starting task 'waiting on telescope' 2010-Oct-08 01:47:28 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2010-Oct-08 01:47:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-08 01:47:28 LOG3 waittrk: Start waittrk 5 2010-Oct-08 01:47:28 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-08 01:47:28 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2010-Oct-08 01:47:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2010-Oct-08 01:47:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:47:28 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023525+263944" 2010-Oct-08 01:47:28 LOG4 got_cormsg: From DATATAKING: pnt tr 23525.250000 263944.250000 -CJ 2010-Oct-08 01:47:28 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 01:47:28 NOTE WAPPDATA-new_file: New FITS file: wapp.20101008.a2048.0003.fits 2010-Oct-08 01:47:28 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20101008.a2048.0003.fits} 2010-Oct-08 01:47:33 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-08 01:47:33 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2010-Oct-08 01:47:33 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-08 01:47:33 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2010-Oct-08 01:47:35 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-08 01:47:35 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2010-Oct-08 01:47:35 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-08 01:47:35 INFO2 waittrk: Now tracking j023525+263944 2010-Oct-08 01:47:35 LOG4 waittrk: Current telescope position: Az = 192.49 ZA = 8.58 2010-Oct-08 01:47:35 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-08 01:47:35 LOG5 finish_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2010-Oct-08 01:47:35 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-08 01:47:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:47:35 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-08 01:47:35 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2010-Oct-08 01:47:35 LOG5 antvel: Calling 'antvel 23525.250000 263944.250000 J Topocentric 0' 2010-Oct-08 01:47:35 LOG2 antvel: Precessing RA = 02:35:25.3 Dec = +26:39:44.3 Epoch = 2010.76954 J 2010-Oct-08 01:47:35 LOG2 antvel: Computed apparent RA = 02:36:05.3 Dec = +26:42:42.1 2010-Oct-08 01:47:35 LOG2 antvel: Parameters to Doppler: Topocentric 20855 2010 281 0.0 2010-Oct-08 01:47:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Oct-08 01:47:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=15939.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-Oct-08 01:47:35 INFO4 dopset_gen: New sky frequencies: 1348.699729 1348.699729 1348.699729 1348.699729 1348.699729 1348.699729 1348.699729 1348.699729 1348.699729 2010-Oct-08 01:47:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1348.699729 sky0=1348.699729 sky1=1348.699729 sky2=1348.699729 sky3=1348.699729 sky4=1348.699729 sky5=1348.699729 sky6=1348.699729 sky7=1348.699729 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2010-Oct-08 01:47:35 LOG2 dopset_gen: Result from 'sky2syn': 11348.699729 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2010-Oct-08 01:47:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11348699729.0} 2010-Oct-08 01:47:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-08 01:47:35 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-08 01:47:35 LOG5 begin_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2010-Oct-08 01:47:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Oct-08 01:47:35 INFO2 adjust_power: Starting to adjust WAPP power 2010-Oct-08 01:47:35 LOG3 vw_send: To DATATAKING: adjpwrif1 2010-Oct-08 01:47:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2010-Oct-08 01:47:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:47:35 START begin_task: Starting task 'waiting on adjpwrif1' 2010-Oct-08 01:47:35 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2010-Oct-08 01:47:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11348699729.0} 2010-Oct-08 01:47:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-08 01:47:35 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2010-Oct-08 01:47:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:47:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:47:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:47:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:47:38 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 01:47:38 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2010-Oct-08 01:47:38 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2010-Oct-08 01:47:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2010-Oct-08 01:47:38 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Oct-08 01:47:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Oct-08 01:47:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:47:38 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Oct-08 01:47:38 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Oct-08 01:47:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:47:38 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Oct-08 01:47:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:47:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:47:41 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 01:47:41 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Oct-08 01:47:41 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Oct-08 01:47:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Oct-08 01:47:41 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-08 01:47:41 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2010-Oct-08 01:47:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Oct-08 01:47:41 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2010-Oct-08 01:47:41 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2010-Oct-08 01:47:41 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2010-Oct-08 01:47:41 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2010-Oct-08 01:47:41 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Oct-08 01:47:41 LOG5 begin_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2010-Oct-08 01:47:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:47:41 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 13 12 dB 2010-Oct-08 01:47:41 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2010-Oct-08 01:47:41 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2010-Oct-08 01:47:41 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2010-Oct-08 01:47:41 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2010-Oct-08 01:47:41 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 15 0 dB 2010-Oct-08 01:47:41 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 2 13 dB 2010-Oct-08 01:47:41 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 3 15 dB 2010-Oct-08 01:47:41 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Oct-08 01:47:41 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Oct-08 01:47:41 LOG5 end_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2010-Oct-08 01:47:41 INFO2 wapp_adjpwr: WAPP power: 0.995 0.999 1.280 1.472 2010-Oct-08 01:47:41 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-08 01:47:41 LOG5 finish_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2010-Oct-08 01:47:41 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Oct-08 01:47:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:47:41 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-08 01:47:41 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2010-Oct-08 01:47:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-08 01:47:41 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-08 01:47:41 LOG5 finish_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2010-Oct-08 01:47:41 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Oct-08 01:47:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:47:42 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-08 01:47:42 LOG5 end_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2010-Oct-08 01:47:42 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON stat_onoff_on {ON scan}' 2010-Oct-08 01:47:42 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 01:47:42 LOG5 begin_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2010-Oct-08 01:47:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for ON scan ...} 2010-Oct-08 01:47:42 INFO2 take_data: Starting WAPP 300-second scan: 28100013 2010-Oct-08 01:47:42 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 01:47:42 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2010-Oct-08 01:47:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 01:47:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2010-Oct-08 01:47:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20863.00 2010-Oct-08 01:47:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11348.699729 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 01:47:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1348.699729 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:47:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1348.699729 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:47:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1348.699729 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:47:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1348.699729 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:47:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804200 != 85804199 diff = 1)! 2010-Oct-08 01:47:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86224812 != 86224811 diff = 1)! 2010-Oct-08 01:47:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86224812 != 86224811 diff = 1)! 2010-Oct-08 01:47:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86224812 != 86224811 diff = 1)! 2010-Oct-08 01:47:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86224812 != 86224811 diff = 1)! 2010-Oct-08 01:48:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85798400 != 85798399 diff = 1)! 2010-Oct-08 01:48:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85798400 != 85798399 diff = 1)! 2010-Oct-08 01:48:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804182 != 85804181 diff = 1)! 2010-Oct-08 01:48:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804168 != 85804167 diff = 1)! 2010-Oct-08 01:48:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804168 != 85804167 diff = 1)! 2010-Oct-08 01:48:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764104 != 85764103 diff = 1)! 2010-Oct-08 01:48:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764104 != 85764103 diff = 1)! 2010-Oct-08 01:48:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764104 != 85764103 diff = 1)! 2010-Oct-08 01:48:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764067 != 85764068 diff = 1)! 2010-Oct-08 01:48:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764067 != 85764068 diff = 1)! 2010-Oct-08 01:48:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764067 != 85764068 diff = 1)! 2010-Oct-08 01:48:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804152 != 85804151 diff = 1)! 2010-Oct-08 01:48:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804166 != 85804165 diff = 1)! 2010-Oct-08 01:49:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764108 != 85764107 diff = 1)! 2010-Oct-08 01:49:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764108 != 85764107 diff = 1)! 2010-Oct-08 01:49:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764108 != 85764107 diff = 1)! 2010-Oct-08 01:49:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764108 != 85764107 diff = 1)! 2010-Oct-08 01:49:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764108 != 85764107 diff = 1)! 2010-Oct-08 01:49:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764108 != 85764107 diff = 1)! 2010-Oct-08 01:49:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764108 != 85764107 diff = 1)! 2010-Oct-08 01:49:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764108 != 85764107 diff = 1)! 2010-Oct-08 01:49:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85793206 != 85793205 diff = 1)! 2010-Oct-08 01:49:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85793206 != 85793205 diff = 1)! 2010-Oct-08 01:49:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85793206 != 85793205 diff = 1)! 2010-Oct-08 01:49:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85793206 != 85793205 diff = 1)! 2010-Oct-08 01:49:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804188 != 85804187 diff = 1)! 2010-Oct-08 01:49:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804174 != 85804173 diff = 1)! 2010-Oct-08 01:49:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804174 != 85804173 diff = 1)! 2010-Oct-08 01:49:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764063 != 85764064 diff = 1)! 2010-Oct-08 01:49:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804168 != 85804169 diff = 1)! 2010-Oct-08 01:49:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804168 != 85804169 diff = 1)! 2010-Oct-08 01:49:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85766479 != 85766480 diff = 1)! 2010-Oct-08 01:49:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85772154 != 85772153 diff = 1)! 2010-Oct-08 01:49:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85772154 != 85772153 diff = 1)! 2010-Oct-08 01:49:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85772154 != 85772153 diff = 1)! 2010-Oct-08 01:49:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85772154 != 85772153 diff = 1)! 2010-Oct-08 01:49:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85772154 != 85772153 diff = 1)! 2010-Oct-08 01:49:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85772154 != 85772153 diff = 1)! 2010-Oct-08 01:49:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85772154 != 85772153 diff = 1)! 2010-Oct-08 01:49:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85772154 != 85772153 diff = 1)! 2010-Oct-08 01:49:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85791538 != 85791537 diff = 1)! 2010-Oct-08 01:50:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764068 != 85764067 diff = 1)! 2010-Oct-08 01:50:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764068 != 85764067 diff = 1)! 2010-Oct-08 01:50:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764068 != 85764067 diff = 1)! 2010-Oct-08 01:50:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764068 != 85764067 diff = 1)! 2010-Oct-08 01:50:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764068 != 85764067 diff = 1)! 2010-Oct-08 01:50:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764068 != 85764067 diff = 1)! 2010-Oct-08 01:50:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764068 != 85764067 diff = 1)! 2010-Oct-08 01:50:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764059 != 85764060 diff = 1)! 2010-Oct-08 01:50:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764059 != 85764060 diff = 1)! 2010-Oct-08 01:50:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85764059 != 85764060 diff = 1)! 2010-Oct-08 01:50:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764059 != 85764060 diff = 1)! 2010-Oct-08 01:50:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85764059 != 85764060 diff = 1)! 2010-Oct-08 01:50:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85764059 != 85764060 diff = 1)! 2010-Oct-08 01:50:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764086 != 85764085 diff = 1)! 2010-Oct-08 01:50:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764086 != 85764085 diff = 1)! 2010-Oct-08 01:50:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764086 != 85764085 diff = 1)! 2010-Oct-08 01:50:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764086 != 85764085 diff = 1)! 2010-Oct-08 01:50:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764086 != 85764085 diff = 1)! 2010-Oct-08 01:50:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764086 != 85764085 diff = 1)! 2010-Oct-08 01:50:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764086 != 85764085 diff = 1)! 2010-Oct-08 01:50:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764086 != 85764085 diff = 1)! 2010-Oct-08 01:50:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804196 != 85804195 diff = 1)! 2010-Oct-08 01:50:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804196 != 85804195 diff = 1)! 2010-Oct-08 01:50:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86004756 != 86004755 diff = 1)! 2010-Oct-08 01:50:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86004756 != 86004754 diff = 2)! 2010-Oct-08 01:50:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764102 != 85764101 diff = 1)! 2010-Oct-08 01:50:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804210 != 85804209 diff = 1)! 2010-Oct-08 01:50:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804210 != 85804209 diff = 1)! 2010-Oct-08 01:50:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804186 != 85804185 diff = 1)! 2010-Oct-08 01:51:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764070 != 85764069 diff = 1)! 2010-Oct-08 01:51:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764070 != 85764069 diff = 1)! 2010-Oct-08 01:51:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764070 != 85764069 diff = 1)! 2010-Oct-08 01:51:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764070 != 85764069 diff = 1)! 2010-Oct-08 01:51:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804153 != 85804154 diff = 1)! 2010-Oct-08 01:51:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804153 != 85804154 diff = 1)! 2010-Oct-08 01:51:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85804153 != 85804154 diff = 1)! 2010-Oct-08 01:51:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804153 != 85804154 diff = 1)! 2010-Oct-08 01:51:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85804153 != 85804154 diff = 1)! 2010-Oct-08 01:51:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85804153 != 85804154 diff = 1)! 2010-Oct-08 01:51:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804184 != 85804183 diff = 1)! 2010-Oct-08 01:51:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804184 != 85804183 diff = 1)! 2010-Oct-08 01:51:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804184 != 85804183 diff = 1)! 2010-Oct-08 01:51:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804184 != 85804183 diff = 1)! 2010-Oct-08 01:52:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804168 != 85804167 diff = 1)! 2010-Oct-08 01:52:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804168 != 85804167 diff = 1)! 2010-Oct-08 01:52:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804168 != 85804167 diff = 1)! 2010-Oct-08 01:52:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804168 != 85804167 diff = 1)! 2010-Oct-08 01:52:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804172 != 85804171 diff = 1)! 2010-Oct-08 01:52:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85795333 != 85795334 diff = 1)! 2010-Oct-08 01:52:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85795333 != 85795334 diff = 1)! 2010-Oct-08 01:52:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 01:52:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 01:52:43 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2010-Oct-08 01:52:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 01:52:43 LOG5 end_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2010-Oct-08 01:52:43 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2010-Oct-08 01:52:43 LOG2 onoff_wapp: Parameters: RA-offset: -90.707099999999855 arcminutes wait: 60 secs 2010-Oct-08 01:52:43 LOG4 track_offsets: Calling 'track_offsets -90.707099999999855 0.0 main small' 2010-Oct-08 01:52:43 START begin_task: Starting task 'sending telescope offsets' 2010-Oct-08 01:52:43 LOG5 begin_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2010-Oct-08 01:52:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2010-Oct-08 01:52:43 INFO2 track_offsets: Starting to send new offsets 2010-Oct-08 01:52:43 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023525+263944" 2010-Oct-08 01:52:43 LOG3 vw_send: To DATATAKING: pnt tr 23525.250000 263944.250000 -CJ -o -UD -1.51178 0.0 -CH 2010-Oct-08 01:52:43 STOP finish_task: Finishing task 'sending telescope offsets' 2010-Oct-08 01:52:43 LOG5 finish_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2010-Oct-08 01:52:43 INFO2 finish_task: DONE finished sending: telescope offsets 2010-Oct-08 01:52:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:52:43 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2010-Oct-08 01:52:43 LOG5 end_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2010-Oct-08 01:52:43 INFO2 lstwait: Waiting for 59.8 secs from LST 02:32:45 to LST 02:33:45 ... 2010-Oct-08 01:52:43 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836175999999789 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Oct-08 01:52:43 START begin_task: Starting task 'waiting on wait on LST' 2010-Oct-08 01:52:43 LOG5 begin_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2010-Oct-08 01:52:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023525+263944" 2010-Oct-08 01:52:43 LOG4 got_cormsg: From DATATAKING: pnt tr 23525.250000 263944.250000 -CJ -o -UD -1.51178 0.0 -CH 2010-Oct-08 01:52:43 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 01:53:19 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'j023525+263944' (after 36 seconds) 2010-Oct-08 01:53:19 LOG3 wait_and_tell_when_on_source: The telescope arrived at source with 24 seconds to spare (36 < 60 seconds) 2010-Oct-08 01:53:43 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-Oct-08 01:53:43 LOG5 end_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2010-Oct-08 01:53:43 LOG4 lstwait: Finished waiting 0.16 seconds late 2010-Oct-08 01:53:43 INFO3 lstwait: Finished waiting 2010-Oct-08 01:53:43 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Oct-08 01:53:43 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF stat_onoff_off {OFF scan}' 2010-Oct-08 01:53:43 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 01:53:43 LOG5 begin_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2010-Oct-08 01:53:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for OFF scan ...} 2010-Oct-08 01:53:43 INFO2 take_data: Starting WAPP 300-second scan: 28100014 2010-Oct-08 01:53:44 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 01:53:44 LOG5 begin_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2010-Oct-08 01:53:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 01:53:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2010-Oct-08 01:53:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21225.00 2010-Oct-08 01:53:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11348.699729 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 01:53:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1348.699729 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:53:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1348.699729 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:53:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1348.699729 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:53:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1348.699729 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:54:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764101 != 85764102 diff = 1)! 2010-Oct-08 01:54:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804151 != 85804150 diff = 1)! 2010-Oct-08 01:54:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804151 != 85804150 diff = 1)! 2010-Oct-08 01:54:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804151 != 85804150 diff = 1)! 2010-Oct-08 01:54:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804151 != 85804150 diff = 1)! 2010-Oct-08 01:54:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804151 != 85804150 diff = 1)! 2010-Oct-08 01:54:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804151 != 85804150 diff = 1)! 2010-Oct-08 01:54:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804151 != 85804150 diff = 1)! 2010-Oct-08 01:54:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764066 != 85764067 diff = 1)! 2010-Oct-08 01:54:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764066 != 85764067 diff = 1)! 2010-Oct-08 01:54:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764066 != 85764067 diff = 1)! 2010-Oct-08 01:55:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764091 != 85764092 diff = 1)! 2010-Oct-08 01:55:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764091 != 85764092 diff = 1)! 2010-Oct-08 01:55:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764091 != 85764092 diff = 1)! 2010-Oct-08 01:55:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764060 != 85764059 diff = 1)! 2010-Oct-08 01:55:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764060 != 85764059 diff = 1)! 2010-Oct-08 01:55:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804206 != 85804205 diff = 1)! 2010-Oct-08 01:55:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804206 != 85804205 diff = 1)! 2010-Oct-08 01:55:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804206 != 85804205 diff = 1)! 2010-Oct-08 01:55:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804206 != 85804205 diff = 1)! 2010-Oct-08 01:55:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804206 != 85804205 diff = 1)! 2010-Oct-08 01:55:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804206 != 85804205 diff = 1)! 2010-Oct-08 01:55:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804206 != 85804205 diff = 1)! 2010-Oct-08 01:55:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804206 != 85804205 diff = 1)! 2010-Oct-08 01:55:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804182 != 85804181 diff = 1)! 2010-Oct-08 01:55:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804182 != 85804181 diff = 1)! 2010-Oct-08 01:55:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804182 != 85804181 diff = 1)! 2010-Oct-08 01:55:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804182 != 85804181 diff = 1)! 2010-Oct-08 01:55:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804182 != 85804181 diff = 1)! 2010-Oct-08 01:55:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804182 != 85804181 diff = 1)! 2010-Oct-08 01:55:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804182 != 85804181 diff = 1)! 2010-Oct-08 01:55:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85797410 != 85797409 diff = 1)! 2010-Oct-08 01:55:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85797410 != 85797409 diff = 1)! 2010-Oct-08 01:55:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85797410 != 85797409 diff = 1)! 2010-Oct-08 01:55:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85797410 != 85797409 diff = 1)! 2010-Oct-08 01:56:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804162 != 85804161 diff = 1)! 2010-Oct-08 01:56:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804162 != 85804161 diff = 1)! 2010-Oct-08 01:56:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804162 != 85804161 diff = 1)! 2010-Oct-08 01:56:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804162 != 85804161 diff = 1)! 2010-Oct-08 01:56:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804201 != 85804202 diff = 1)! 2010-Oct-08 01:56:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804201 != 85804202 diff = 1)! 2010-Oct-08 01:56:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804201 != 85804202 diff = 1)! 2010-Oct-08 01:56:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804201 != 85804202 diff = 1)! 2010-Oct-08 01:56:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804212 != 85804211 diff = 1)! 2010-Oct-08 01:56:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804212 != 85804211 diff = 1)! 2010-Oct-08 01:56:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804212 != 85804211 diff = 1)! 2010-Oct-08 01:56:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804212 != 85804211 diff = 1)! 2010-Oct-08 01:56:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764073 != 85764074 diff = 1)! 2010-Oct-08 01:56:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764073 != 85764074 diff = 1)! 2010-Oct-08 01:56:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764073 != 85764074 diff = 1)! 2010-Oct-08 01:57:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86049762 != 86049761 diff = 1)! 2010-Oct-08 01:57:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86049762 != 86049761 diff = 1)! 2010-Oct-08 01:57:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86049762 != 86049761 diff = 1)! 2010-Oct-08 01:57:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86049762 != 86049761 diff = 1)! 2010-Oct-08 01:57:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804166 != 85804165 diff = 1)! 2010-Oct-08 01:57:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804166 != 85804165 diff = 1)! 2010-Oct-08 01:57:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804166 != 85804165 diff = 1)! 2010-Oct-08 01:57:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85946463 != 85946464 diff = 1)! 2010-Oct-08 01:57:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804163 != 85804164 diff = 1)! 2010-Oct-08 01:57:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804163 != 85804164 diff = 1)! 2010-Oct-08 01:57:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804163 != 85804164 diff = 1)! 2010-Oct-08 01:57:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85804163 != 85804164 diff = 1)! 2010-Oct-08 01:57:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804163 != 85804164 diff = 1)! 2010-Oct-08 01:57:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85804163 != 85804164 diff = 1)! 2010-Oct-08 01:57:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85804163 != 85804164 diff = 1)! 2010-Oct-08 01:57:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804163 != 85804164 diff = 1)! 2010-Oct-08 01:58:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85798641 != 85798642 diff = 1)! 2010-Oct-08 01:58:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85798641 != 85798642 diff = 1)! 2010-Oct-08 01:58:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85798641 != 85798642 diff = 1)! 2010-Oct-08 01:58:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85798641 != 85798642 diff = 1)! 2010-Oct-08 01:58:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85769536 != 85769535 diff = 1)! 2010-Oct-08 01:58:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85769536 != 85769535 diff = 1)! 2010-Oct-08 01:58:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85769536 != 85769535 diff = 1)! 2010-Oct-08 01:58:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85769536 != 85769535 diff = 1)! 2010-Oct-08 01:58:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85769536 != 85769535 diff = 1)! 2010-Oct-08 01:58:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85769536 != 85769535 diff = 1)! 2010-Oct-08 01:58:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85769536 != 85769535 diff = 1)! 2010-Oct-08 01:58:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85769536 != 85769535 diff = 1)! 2010-Oct-08 01:58:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764101 != 85764102 diff = 1)! 2010-Oct-08 01:58:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764101 != 85764102 diff = 1)! 2010-Oct-08 01:58:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764101 != 85764102 diff = 1)! 2010-Oct-08 01:58:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86004720 != 86004719 diff = 1)! 2010-Oct-08 01:58:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86004720 != 86004719 diff = 1)! 2010-Oct-08 01:58:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86004720 != 86004719 diff = 1)! 2010-Oct-08 01:58:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86004720 != 86004719 diff = 1)! 2010-Oct-08 01:58:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (86004720 != 86004719 diff = 1)! 2010-Oct-08 01:58:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86004720 != 86004719 diff = 1)! 2010-Oct-08 01:58:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86125046 != 86125045 diff = 1)! 2010-Oct-08 01:58:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86125046 != 86125045 diff = 1)! 2010-Oct-08 01:58:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86125046 != 86125045 diff = 1)! 2010-Oct-08 01:58:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86125046 != 86125045 diff = 1)! 2010-Oct-08 01:58:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (86125046 != 86125045 diff = 1)! 2010-Oct-08 01:58:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86125046 != 86125045 diff = 1)! 2010-Oct-08 01:58:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 01:58:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 01:58:45 LOG5 end_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2010-Oct-08 01:58:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 01:58:45 LOG5 end_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2010-Oct-08 01:58:45 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2010-Oct-08 01:58:45 START begin_task: Starting task 'WAPP calibration' 2010-Oct-08 01:58:45 LOG5 begin_task: Level: (2) ID = <10138> Status = 0 0 0 0 ok 2010-Oct-08 01:58:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Oct-08 01:58:45 START begin_task: Starting task 'selecting calibration type' 2010-Oct-08 01:58:45 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2010-Oct-08 01:58:45 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-08 01:58:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-08 01:58:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:58:45 START begin_task: Starting task 'waiting on setcal' 2010-Oct-08 01:58:45 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2010-Oct-08 01:58:45 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-08 01:58:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 01:58:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:58:45 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 01:58:45 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-08 01:58:45 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2010-Oct-08 01:58:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-08 01:58:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-08 01:58:45 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2010-Oct-08 01:58:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Oct-08 01:58:45 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Oct-08 01:58:45 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Oct-08 01:58:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-08 01:58:45 LOG5 begin_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2010-Oct-08 01:58:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:58:45 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-08 01:58:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Oct-08 01:58:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-08 01:58:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-08 01:58:45 LOG5 end_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2010-Oct-08 01:58:46 LOG4 take_data: Calling 'take_data 10 10 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Oct-08 01:58:46 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 01:58:46 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2010-Oct-08 01:58:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Oct-08 01:58:46 INFO2 take_data: Starting WAPP 10-second scan: 28100015 2010-Oct-08 01:58:46 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 01:58:46 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2010-Oct-08 01:58:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 01:58:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Oct-08 01:58:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21527.00 2010-Oct-08 01:58:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11348.699729 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 01:58:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1348.699729 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:58:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1348.699729 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:58:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1348.699729 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:58:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1348.699729 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:58:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 01:58:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 01:58:57 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2010-Oct-08 01:58:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 01:58:57 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2010-Oct-08 01:58:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Oct-08 01:58:57 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Oct-08 01:58:57 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Oct-08 01:58:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-08 01:58:57 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-Oct-08 01:58:57 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-08 01:58:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Oct-08 01:58:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-08 01:58:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-08 01:58:57 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-Oct-08 01:58:57 LOG4 take_data: Calling 'take_data 10 10 CAL OFF stat_cal_off {CAL-OFF spectra}' 2010-Oct-08 01:58:57 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 01:58:57 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2010-Oct-08 01:58:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2010-Oct-08 01:58:57 INFO2 take_data: Starting WAPP 10-second scan: 28100016 2010-Oct-08 01:58:58 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 01:58:58 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2010-Oct-08 01:58:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 01:58:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (2.012 > 2.0)! 2010-Oct-08 01:58:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.524 0.000 0.000 0.000 2010-Oct-08 01:58:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 1.390 0.000 0.000 2010-Oct-08 01:58:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.807 0.000 0.000 0.000 2010-Oct-08 01:58:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 2.012 0.000 0.000 2010-Oct-08 01:58:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2010-Oct-08 01:58:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21539.00 2010-Oct-08 01:59:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11348.699729 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 01:59:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1348.699729 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:59:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1348.699729 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:59:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1348.699729 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:59:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1348.699729 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 01:59:09 INFO5 check_wapp_levels: WAPP power levels are between 1.390 and 2.012 (still bad) 2010-Oct-08 01:59:09 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2010-Oct-08 01:59:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (858162542 != 858162541 diff = 1)! 2010-Oct-08 01:59:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (858162542 != 858162541 diff = 1)! 2010-Oct-08 01:59:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (858162542 != 858162541 diff = 1)! 2010-Oct-08 01:59:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 01:59:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 01:59:09 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2010-Oct-08 01:59:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 01:59:09 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2010-Oct-08 01:59:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-08 01:59:09 STOP finish_task: Finishing task 'WAPP calibration' 2010-Oct-08 01:59:09 LOG5 finish_task: Level: (2) ID = <10138> Status = 0 0 0 0 ok 2010-Oct-08 01:59:09 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Oct-08 01:59:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:59:09 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Oct-08 01:59:09 LOG5 end_task: Level: (2) ID = <10138> Status = 0 0 0 0 ok 2010-Oct-08 01:59:09 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-08 01:59:09 LOG5 begin_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2010-Oct-08 01:59:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-08 01:59:09 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-08 01:59:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023525+263944" 2010-Oct-08 01:59:09 LOG3 vw_send: To DATATAKING: pnt tr 23525.250000 263944.250000 -CJ 2010-Oct-08 01:59:09 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-08 01:59:09 LOG5 finish_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2010-Oct-08 01:59:09 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-08 01:59:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:59:09 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-08 01:59:09 LOG5 end_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2010-Oct-08 01:59:09 STOP finish_task: Finishing task 'standard on/off' 2010-Oct-08 01:59:09 LOG5 finish_task: Level: (1) ID = <10117> Status = 0 0 0 0 ok 2010-Oct-08 01:59:09 DONE finish_task: DONE finished pattern: standard on/off 2010-Oct-08 01:59:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-08 01:59:09 END end_task: Finishing task 'standard on/off' with status 'OK' 2010-Oct-08 01:59:10 LOG5 end_task: Level: (1) ID = <10117> Status = 0 0 0 0 ok 2010-Oct-08 01:59:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (858162542 != 858162541 diff = 1)! 2010-Oct-08 01:59:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (858162542 != 858162541 diff = 1)! 2010-Oct-08 01:59:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (858162542 != 858162541 diff = 1)! 2010-Oct-08 01:59:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (858162542 != 858162541 diff = 1)! 2010-Oct-08 01:59:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (858162542 != 858162541 diff = 1)! 2010-Oct-08 01:59:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023525+263944" 2010-Oct-08 01:59:10 LOG4 got_cormsg: From DATATAKING: pnt tr 23525.250000 263944.250000 -CJ 2010-Oct-08 01:59:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 01:59:14 COMMAND CIMA-send_to_exec: Sending command to point to a source 2010-Oct-08 01:59:14 LOG4 exec_msg: From OBSERVER: track_new_source j023154+254620 023153.73 254619.66 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 15334 Topocentric velocity(optical) 0 0 0.0 0.0 0 2010-Oct-08 01:59:14 LOG1 track_new_source: Calling 'track_new_source j023154+254620 023153.73 254619.66 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 15334 Topocentric velocity(optical) 0 0 0.0 0.0 0' 2010-Oct-08 01:59:14 BEGIN begin_task: Starting task 'selecting new source' 2010-Oct-08 01:59:14 LOG5 begin_task: Level: (1) ID = <10148> Status = 0 0 0 0 ok 2010-Oct-08 01:59:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {j023154+254620} INFO {Selecting source 'j023154+254620' ...} 2010-Oct-08 01:59:14 LOG3 track_source: Calling 'track_source j023154+254620 023153.73 254619.66 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 15334 Topocentric velocity(optical)' 2010-Oct-08 01:59:14 START begin_task: Starting task 'sending tracking commands' 2010-Oct-08 01:59:14 LOG5 begin_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2010-Oct-08 01:59:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {j023154+254620} INFO {Slewing to source 'j023154+254620' ...} 2010-Oct-08 01:59:14 INFO1 track_source: Starting to track j023154+254620 2010-Oct-08 01:59:14 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023154+254620" 2010-Oct-08 01:59:14 LOG3 vw_send: To DATATAKING: set ra 023153.73 2010-Oct-08 01:59:14 LOG3 vw_send: To DATATAKING: set dec 254619.66 2010-Oct-08 01:59:14 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Oct-08 01:59:14 LOG3 vw_send: To DATATAKING: pnt tr 023153.73 254619.66 -CJ 2010-Oct-08 01:59:14 LOG3 vw_send: To DATATAKING: dopsetvel 15334 topo 2010-Oct-08 01:59:14 STOP finish_task: Finishing task 'sending tracking commands' 2010-Oct-08 01:59:14 LOG5 finish_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2010-Oct-08 01:59:14 INFO2 finish_task: DONE finished sending: tracking commands 2010-Oct-08 01:59:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:59:14 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Oct-08 01:59:14 LOG5 end_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2010-Oct-08 01:59:14 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2010-Oct-08 01:59:14 START begin_task: Starting task 'applying pointing corrections' 2010-Oct-08 01:59:14 LOG5 begin_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2010-Oct-08 01:59:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2010-Oct-08 01:59:14 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-08 01:59:14 STOP finish_task: Finishing task 'applying pointing corrections' 2010-Oct-08 01:59:14 LOG5 finish_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2010-Oct-08 01:59:14 INFO2 finish_task: DONE finished applying: pointing corrections 2010-Oct-08 01:59:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 01:59:14 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2010-Oct-08 01:59:14 LOG5 end_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2010-Oct-08 01:59:14 STOP finish_task: Finishing task 'selecting new source' 2010-Oct-08 01:59:14 LOG5 finish_task: Level: (1) ID = <10148> Status = 0 0 0 0 ok 2010-Oct-08 01:59:14 DONE finish_task: DONE finished selecting: new source 2010-Oct-08 01:59:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-08 01:59:14 END end_task: Finishing task 'selecting new source' with status 'OK' 2010-Oct-08 01:59:14 LOG5 end_task: Level: (1) ID = <10148> Status = 0 0 0 0 ok 2010-Oct-08 01:59:14 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023154+254620" 2010-Oct-08 01:59:14 LOG4 got_cormsg: From DATATAKING: set ra 023153.73 2010-Oct-08 01:59:14 LOG4 got_cormsg: From DATATAKING: set dec 254619.66 2010-Oct-08 01:59:14 LOG4 got_cormsg: From DATATAKING: vw% 023153.73 2010-Oct-08 01:59:14 LOG4 got_cormsg: From DATATAKING: vw% 254619.66 2010-Oct-08 01:59:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:59:14 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Oct-08 01:59:14 LOG4 got_cormsg: From DATATAKING: pnt tr 023153.73 254619.66 -CJ 2010-Oct-08 01:59:14 LOG4 got_cormsg: From DATATAKING: dopsetvel 15334 topo 2010-Oct-08 01:59:14 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 01:59:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:59:14 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-08 01:59:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 01:59:15 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2010-Oct-08 01:59:15 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 off lcorcal each first one 2010-Oct-08 01:59:15 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 off lcorcal each first one' 2010-Oct-08 01:59:15 BEGIN begin_task: Starting task 'standard on/off' 2010-Oct-08 01:59:15 LOG5 begin_task: Level: (1) ID = <10151> Status = 0 0 0 0 ok 2010-Oct-08 01:59:15 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'j023154+254620' 2010-Oct-08 01:59:15 INFO1 onoff_wapp: Starting pattern: Standard on/off 2010-Oct-08 01:59:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2010-Oct-08 01:59:15 START begin_task: Starting task 'waiting on telescope' 2010-Oct-08 01:59:15 LOG5 begin_task: Level: (2) ID = <10152> Status = 0 0 0 0 ok 2010-Oct-08 01:59:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-08 01:59:15 LOG3 waittrk: Start waittrk 5 2010-Oct-08 01:59:15 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-08 01:59:15 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2010-Oct-08 01:59:20 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-08 01:59:20 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2010-Oct-08 01:59:20 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-08 01:59:20 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2010-Oct-08 01:59:20 INFO5 check_wapp_levels: WAPP power levels are now OK between 1.058 and 1.526 2010-Oct-08 02:00:05 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-08 02:00:05 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2010-Oct-08 02:00:05 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-08 02:00:05 INFO2 waittrk: Now tracking j023154+254620 2010-Oct-08 02:00:05 LOG4 waittrk: Current telescope position: Az = 166.88 ZA = 7.67 2010-Oct-08 02:00:05 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-08 02:00:05 LOG5 finish_task: Level: (2) ID = <10152> Status = 0 0 0 0 ok 2010-Oct-08 02:00:05 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-08 02:00:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:00:05 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-08 02:00:05 LOG5 end_task: Level: (2) ID = <10152> Status = 0 0 0 0 ok 2010-Oct-08 02:00:05 START begin_task: Starting task 'selecting calibration type' 2010-Oct-08 02:00:05 LOG5 begin_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2010-Oct-08 02:00:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-08 02:00:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-08 02:00:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 02:00:05 START begin_task: Starting task 'waiting on setcal' 2010-Oct-08 02:00:05 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2010-Oct-08 02:00:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-08 02:00:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 02:00:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:00:05 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 02:00:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-08 02:00:05 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2010-Oct-08 02:00:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-08 02:00:05 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-08 02:00:05 LOG5 end_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2010-Oct-08 02:00:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2010-Oct-08 02:00:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2010-Oct-08 02:00:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2010-Oct-08 02:00:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2010-Oct-08 02:00:05 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2010-Oct-08 02:00:05 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2010-Oct-08 02:00:05 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-08 02:00:05 LOG5 begin_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2010-Oct-08 02:00:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-08 02:00:05 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-08 02:00:05 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023154+254620" 2010-Oct-08 02:00:05 LOG3 vw_send: To DATATAKING: pnt tr 23153.730000 254619.660000 -CJ 2010-Oct-08 02:00:05 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-08 02:00:05 LOG5 finish_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2010-Oct-08 02:00:05 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-08 02:00:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:00:05 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-08 02:00:05 LOG5 end_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2010-Oct-08 02:00:05 START begin_task: Starting task 'waiting on telescope' 2010-Oct-08 02:00:05 LOG5 begin_task: Level: (2) ID = <10158> Status = 0 0 0 0 ok 2010-Oct-08 02:00:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-08 02:00:05 LOG3 waittrk: Start waittrk 5 2010-Oct-08 02:00:05 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-08 02:00:05 LOG5 begin_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2010-Oct-08 02:00:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2010-Oct-08 02:00:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:00:05 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023154+254620" 2010-Oct-08 02:00:05 LOG4 got_cormsg: From DATATAKING: pnt tr 23153.730000 254619.660000 -CJ 2010-Oct-08 02:00:05 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 02:00:06 NOTE WAPPDATA-new_file: New FITS file: wapp.20101008.a2048.0004.fits 2010-Oct-08 02:00:06 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20101008.a2048.0004.fits} 2010-Oct-08 02:00:10 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-08 02:00:10 LOG5 end_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2010-Oct-08 02:00:11 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-08 02:00:11 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2010-Oct-08 02:00:13 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-08 02:00:13 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2010-Oct-08 02:00:13 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-08 02:00:13 INFO2 waittrk: Now tracking j023154+254620 2010-Oct-08 02:00:13 LOG4 waittrk: Current telescope position: Az = 166.65 ZA = 7.68 2010-Oct-08 02:00:13 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-08 02:00:13 LOG5 finish_task: Level: (2) ID = <10158> Status = 0 0 0 0 ok 2010-Oct-08 02:00:13 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-08 02:00:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:00:13 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-08 02:00:13 LOG5 end_task: Level: (2) ID = <10158> Status = 0 0 0 0 ok 2010-Oct-08 02:00:13 LOG5 antvel: Calling 'antvel 23153.730000 254619.660000 J Topocentric 0' 2010-Oct-08 02:00:13 LOG2 antvel: Precessing RA = 02:31:53.7 Dec = +25:46:19.7 Epoch = 2010.76956 J 2010-Oct-08 02:00:13 LOG2 antvel: Computed apparent RA = 02:32:33.5 Dec = +25:49:19.9 2010-Oct-08 02:00:13 LOG2 antvel: Parameters to Doppler: Topocentric 21612 2010 281 0.0 2010-Oct-08 02:00:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Oct-08 02:00:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=15334.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-Oct-08 02:00:13 INFO4 dopset_gen: New sky frequencies: 1351.289049 1351.289049 1351.289049 1351.289049 1351.289049 1351.289049 1351.289049 1351.289049 1351.289049 2010-Oct-08 02:00:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1351.289049 sky0=1351.289049 sky1=1351.289049 sky2=1351.289049 sky3=1351.289049 sky4=1351.289049 sky5=1351.289049 sky6=1351.289049 sky7=1351.289049 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2010-Oct-08 02:00:13 LOG2 dopset_gen: Result from 'sky2syn': 11351.289049 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2010-Oct-08 02:00:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11351289049.0} 2010-Oct-08 02:00:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-08 02:00:13 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-08 02:00:13 LOG5 begin_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2010-Oct-08 02:00:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Oct-08 02:00:13 INFO2 adjust_power: Starting to adjust WAPP power 2010-Oct-08 02:00:13 LOG3 vw_send: To DATATAKING: adjpwrif1 2010-Oct-08 02:00:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2010-Oct-08 02:00:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 02:00:13 START begin_task: Starting task 'waiting on adjpwrif1' 2010-Oct-08 02:00:13 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-Oct-08 02:00:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11351289049.0} 2010-Oct-08 02:00:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-08 02:00:13 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2010-Oct-08 02:00:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 02:00:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:00:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:00:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:00:13 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 02:00:13 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2010-Oct-08 02:00:13 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-Oct-08 02:00:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2010-Oct-08 02:00:13 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Oct-08 02:00:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Oct-08 02:00:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 02:00:13 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Oct-08 02:00:13 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2010-Oct-08 02:00:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:00:13 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Oct-08 02:00:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 02:00:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:00:15 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 02:00:15 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Oct-08 02:00:15 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2010-Oct-08 02:00:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Oct-08 02:00:15 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-08 02:00:15 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2010-Oct-08 02:00:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Oct-08 02:00:15 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2010-Oct-08 02:00:15 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2010-Oct-08 02:00:15 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2010-Oct-08 02:00:15 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2010-Oct-08 02:00:15 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Oct-08 02:00:15 LOG5 begin_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2010-Oct-08 02:00:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:00:15 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 13 12 dB 2010-Oct-08 02:00:15 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2010-Oct-08 02:00:15 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2010-Oct-08 02:00:15 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2010-Oct-08 02:00:15 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2010-Oct-08 02:00:15 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 15 0 dB 2010-Oct-08 02:00:15 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 2 13 dB 2010-Oct-08 02:00:15 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 3 15 dB 2010-Oct-08 02:00:15 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Oct-08 02:00:16 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Oct-08 02:00:16 LOG5 end_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2010-Oct-08 02:00:16 INFO2 wapp_adjpwr: WAPP power: 0.983 1.058 1.158 1.545 2010-Oct-08 02:00:16 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-08 02:00:16 LOG5 finish_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2010-Oct-08 02:00:16 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Oct-08 02:00:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:00:16 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-08 02:00:16 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2010-Oct-08 02:00:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-08 02:00:16 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-08 02:00:16 LOG5 finish_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2010-Oct-08 02:00:16 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Oct-08 02:00:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:00:16 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-08 02:00:16 LOG5 end_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2010-Oct-08 02:00:16 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON stat_onoff_on {ON scan}' 2010-Oct-08 02:00:16 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 02:00:16 LOG5 begin_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2010-Oct-08 02:00:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for ON scan ...} 2010-Oct-08 02:00:16 INFO2 take_data: Starting WAPP 300-second scan: 28100017 2010-Oct-08 02:00:16 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 02:00:16 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2010-Oct-08 02:00:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 02:00:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2010-Oct-08 02:00:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21617.00 2010-Oct-08 02:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11351.289049 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 02:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:00:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86029178 != 86029177 diff = 1)! 2010-Oct-08 02:00:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86029178 != 86029177 diff = 1)! 2010-Oct-08 02:00:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764082 != 85764081 diff = 1)! 2010-Oct-08 02:00:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764082 != 85764081 diff = 1)! 2010-Oct-08 02:00:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764082 != 85764081 diff = 1)! 2010-Oct-08 02:00:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764082 != 85764081 diff = 1)! 2010-Oct-08 02:00:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764082 != 85764081 diff = 1)! 2010-Oct-08 02:00:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764082 != 85764081 diff = 1)! 2010-Oct-08 02:00:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764082 != 85764081 diff = 1)! 2010-Oct-08 02:00:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764086 != 85764085 diff = 1)! 2010-Oct-08 02:00:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764086 != 85764085 diff = 1)! 2010-Oct-08 02:00:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764086 != 85764085 diff = 1)! 2010-Oct-08 02:00:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764086 != 85764085 diff = 1)! 2010-Oct-08 02:00:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764086 != 85764085 diff = 1)! 2010-Oct-08 02:01:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764084 != 85764083 diff = 1)! 2010-Oct-08 02:01:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764084 != 85764083 diff = 1)! 2010-Oct-08 02:01:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764084 != 85764083 diff = 1)! 2010-Oct-08 02:01:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764084 != 85764083 diff = 1)! 2010-Oct-08 02:01:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764084 != 85764083 diff = 1)! 2010-Oct-08 02:01:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764084 != 85764083 diff = 1)! 2010-Oct-08 02:01:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764084 != 85764083 diff = 1)! 2010-Oct-08 02:01:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764084 != 85764083 diff = 1)! 2010-Oct-08 02:01:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85767238 != 85767237 diff = 1)! 2010-Oct-08 02:01:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85767238 != 85767237 diff = 1)! 2010-Oct-08 02:01:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85767238 != 85767237 diff = 1)! 2010-Oct-08 02:01:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85767238 != 85767237 diff = 1)! 2010-Oct-08 02:01:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85767238 != 85767237 diff = 1)! 2010-Oct-08 02:01:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85767238 != 85767237 diff = 1)! 2010-Oct-08 02:01:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85767238 != 85767237 diff = 1)! 2010-Oct-08 02:01:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85767238 != 85767237 diff = 1)! 2010-Oct-08 02:01:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85767238 != 85767237 diff = 1)! 2010-Oct-08 02:02:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804185 != 85804186 diff = 1)! 2010-Oct-08 02:02:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804185 != 85804186 diff = 1)! 2010-Oct-08 02:02:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804185 != 85804186 diff = 1)! 2010-Oct-08 02:02:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85804185 != 85804186 diff = 1)! 2010-Oct-08 02:02:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804185 != 85804186 diff = 1)! 2010-Oct-08 02:02:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85804185 != 85804186 diff = 1)! 2010-Oct-08 02:02:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85804185 != 85804186 diff = 1)! 2010-Oct-08 02:02:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804185 != 85804186 diff = 1)! 2010-Oct-08 02:03:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85792273 != 85792272 diff = 1)! 2010-Oct-08 02:03:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.748 < 0.75)! 2010-Oct-08 02:03:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.748 0.000 0.000 0.000 2010-Oct-08 02:03:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 0.942 0.000 0.000 2010-Oct-08 02:03:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.879 0.000 0.000 0.000 2010-Oct-08 02:03:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 1.370 0.000 0.000 2010-Oct-08 02:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.748 and 1.370 (still bad) 2010-Oct-08 02:03:46 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.751 and 1.374 2010-Oct-08 02:03:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.745 < 0.75)! 2010-Oct-08 02:03:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.745 0.000 0.000 0.000 2010-Oct-08 02:03:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 0.938 0.000 0.000 2010-Oct-08 02:03:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.875 0.000 0.000 0.000 2010-Oct-08 02:03:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 1.364 0.000 0.000 2010-Oct-08 02:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.743 and 1.362 (still bad) 2010-Oct-08 02:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.741 and 1.359 (still bad) 2010-Oct-08 02:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.742 and 1.361 (still bad) 2010-Oct-08 02:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.746 and 1.365 (still bad) 2010-Oct-08 02:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.739 and 1.358 (still bad) 2010-Oct-08 02:03:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764074 != 85764073 diff = 1)! 2010-Oct-08 02:03:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764074 != 85764073 diff = 1)! 2010-Oct-08 02:03:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764074 != 85764073 diff = 1)! 2010-Oct-08 02:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.742 and 1.363 (still bad) 2010-Oct-08 02:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.738 and 1.357 (still bad) 2010-Oct-08 02:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.738 and 1.356 (still bad) 2010-Oct-08 02:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.734 and 1.349 (still bad) 2010-Oct-08 02:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.737 and 1.354 (still bad) 2010-Oct-08 02:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.740 and 1.360 (still bad) 2010-Oct-08 02:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.740 and 1.359 (still bad) 2010-Oct-08 02:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.736 and 1.353 (still bad) 2010-Oct-08 02:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.733 and 1.350 (still bad) 2010-Oct-08 02:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.735 and 1.351 (still bad) 2010-Oct-08 02:04:21 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.976 and 1.530 2010-Oct-08 02:04:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764096 != 85764095 diff = 1)! 2010-Oct-08 02:04:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764096 != 85764095 diff = 1)! 2010-Oct-08 02:04:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764096 != 85764095 diff = 1)! 2010-Oct-08 02:04:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764096 != 85764095 diff = 1)! 2010-Oct-08 02:04:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764090 != 85764089 diff = 1)! 2010-Oct-08 02:05:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85964668 != 85964667 diff = 1)! 2010-Oct-08 02:05:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85964668 != 85964667 diff = 1)! 2010-Oct-08 02:05:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85964668 != 85964667 diff = 1)! 2010-Oct-08 02:05:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85964668 != 85964667 diff = 1)! 2010-Oct-08 02:05:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85964668 != 85964667 diff = 1)! 2010-Oct-08 02:05:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85964668 != 85964667 diff = 1)! 2010-Oct-08 02:05:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85964668 != 85964667 diff = 1)! 2010-Oct-08 02:05:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85964668 != 85964667 diff = 1)! 2010-Oct-08 02:05:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 02:05:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 02:05:17 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2010-Oct-08 02:05:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 02:05:17 LOG5 end_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2010-Oct-08 02:05:17 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2010-Oct-08 02:05:17 LOG2 onoff_wapp: Parameters: RA-offset: -90.707100000000253 arcminutes wait: 60 secs 2010-Oct-08 02:05:17 LOG4 track_offsets: Calling 'track_offsets -90.707100000000253 0.0 main small' 2010-Oct-08 02:05:17 START begin_task: Starting task 'sending telescope offsets' 2010-Oct-08 02:05:17 LOG5 begin_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2010-Oct-08 02:05:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2010-Oct-08 02:05:17 INFO2 track_offsets: Starting to send new offsets 2010-Oct-08 02:05:17 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023154+254620" 2010-Oct-08 02:05:17 LOG3 vw_send: To DATATAKING: pnt tr 23153.730000 254619.660000 -CJ -o -UD -1.51179 0.0 -CH 2010-Oct-08 02:05:17 STOP finish_task: Finishing task 'sending telescope offsets' 2010-Oct-08 02:05:17 LOG5 finish_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2010-Oct-08 02:05:17 INFO2 finish_task: DONE finished sending: telescope offsets 2010-Oct-08 02:05:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:05:17 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2010-Oct-08 02:05:17 LOG5 end_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2010-Oct-08 02:05:17 INFO2 lstwait: Waiting for 59.8 secs from LST 02:45:21 to LST 02:46:21 ... 2010-Oct-08 02:05:17 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836175999999789 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Oct-08 02:05:17 START begin_task: Starting task 'waiting on wait on LST' 2010-Oct-08 02:05:17 LOG5 begin_task: Level: (2) ID = <10169> Status = 0 0 0 0 ok 2010-Oct-08 02:05:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023154+254620" 2010-Oct-08 02:05:17 LOG4 got_cormsg: From DATATAKING: pnt tr 23153.730000 254619.660000 -CJ -o -UD -1.51179 0.0 -CH 2010-Oct-08 02:05:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 02:05:55 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'j023154+254620' (after 38 seconds) 2010-Oct-08 02:05:55 LOG3 wait_and_tell_when_on_source: The telescope arrived at source with 22 seconds to spare (38 < 60 seconds) 2010-Oct-08 02:06:17 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-Oct-08 02:06:17 LOG5 end_task: Level: (2) ID = <10169> Status = 0 0 0 0 ok 2010-Oct-08 02:06:17 LOG4 lstwait: Finished waiting 0.16 seconds late 2010-Oct-08 02:06:17 INFO3 lstwait: Finished waiting 2010-Oct-08 02:06:17 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Oct-08 02:06:17 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF stat_onoff_off {OFF scan}' 2010-Oct-08 02:06:17 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 02:06:17 LOG5 begin_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2010-Oct-08 02:06:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for OFF scan ...} 2010-Oct-08 02:06:17 INFO2 take_data: Starting WAPP 300-second scan: 28100018 2010-Oct-08 02:06:18 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 02:06:18 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2010-Oct-08 02:06:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 02:06:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2010-Oct-08 02:06:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21979.00 2010-Oct-08 02:06:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11351.289049 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 02:06:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:06:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:06:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:06:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:06:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.743 < 0.75)! 2010-Oct-08 02:06:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.743 0.000 0.000 0.000 2010-Oct-08 02:06:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 0.922 0.000 0.000 2010-Oct-08 02:06:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.872 0.000 0.000 0.000 2010-Oct-08 02:06:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 1.341 0.000 0.000 2010-Oct-08 02:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.732 and 1.334 (still bad) 2010-Oct-08 02:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.727 and 1.331 (still bad) 2010-Oct-08 02:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.738 and 1.344 (still bad) 2010-Oct-08 02:06:48 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.832 and 1.420 2010-Oct-08 02:06:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85972426 != 85972425 diff = 1)! 2010-Oct-08 02:07:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86044786 != 86044785 diff = 1)! 2010-Oct-08 02:07:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86044786 != 86044785 diff = 1)! 2010-Oct-08 02:07:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86044786 != 86044785 diff = 1)! 2010-Oct-08 02:07:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86044786 != 86044785 diff = 1)! 2010-Oct-08 02:07:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764084 != 85764083 diff = 1)! 2010-Oct-08 02:07:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764084 != 85764083 diff = 1)! 2010-Oct-08 02:07:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764084 != 85764083 diff = 1)! 2010-Oct-08 02:07:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764084 != 85764083 diff = 1)! 2010-Oct-08 02:07:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764084 != 85764083 diff = 1)! 2010-Oct-08 02:07:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764084 != 85764083 diff = 1)! 2010-Oct-08 02:07:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764084 != 85764083 diff = 1)! 2010-Oct-08 02:07:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85779914 != 85779915 diff = 1)! 2010-Oct-08 02:07:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85788288 != 85788287 diff = 1)! 2010-Oct-08 02:07:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85788288 != 85788287 diff = 1)! 2010-Oct-08 02:07:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85788288 != 85788287 diff = 1)! 2010-Oct-08 02:07:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85788288 != 85788287 diff = 1)! 2010-Oct-08 02:07:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85788288 != 85788287 diff = 1)! 2010-Oct-08 02:07:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85788288 != 85788287 diff = 1)! 2010-Oct-08 02:07:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85788288 != 85788287 diff = 1)! 2010-Oct-08 02:07:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85924518 != 85924517 diff = 1)! 2010-Oct-08 02:07:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85924518 != 85924517 diff = 1)! 2010-Oct-08 02:07:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85924518 != 85924517 diff = 1)! 2010-Oct-08 02:07:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85924518 != 85924517 diff = 1)! 2010-Oct-08 02:07:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85924518 != 85924517 diff = 1)! 2010-Oct-08 02:07:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85924518 != 85924517 diff = 1)! 2010-Oct-08 02:07:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85924518 != 85924517 diff = 1)! 2010-Oct-08 02:07:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85924518 != 85924517 diff = 1)! 2010-Oct-08 02:07:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85792674 != 85792673 diff = 1)! 2010-Oct-08 02:07:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85792674 != 85792673 diff = 1)! 2010-Oct-08 02:07:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85792674 != 85792673 diff = 1)! 2010-Oct-08 02:07:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85792674 != 85792673 diff = 1)! 2010-Oct-08 02:07:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85792674 != 85792673 diff = 1)! 2010-Oct-08 02:08:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804188 != 85804187 diff = 1)! 2010-Oct-08 02:08:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804188 != 85804187 diff = 1)! 2010-Oct-08 02:08:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804188 != 85804187 diff = 1)! 2010-Oct-08 02:08:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804188 != 85804187 diff = 1)! 2010-Oct-08 02:08:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85976629 != 85976630 diff = 1)! 2010-Oct-08 02:08:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85976629 != 85976630 diff = 1)! 2010-Oct-08 02:08:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85976629 != 85976630 diff = 1)! 2010-Oct-08 02:08:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (86004749 != 86004750 diff = 1)! 2010-Oct-08 02:08:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (86004749 != 86004750 diff = 1)! 2010-Oct-08 02:08:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (86004749 != 86004750 diff = 1)! 2010-Oct-08 02:08:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (86004749 != 86004750 diff = 1)! 2010-Oct-08 02:08:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764073 != 85764074 diff = 1)! 2010-Oct-08 02:08:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764073 != 85764074 diff = 1)! 2010-Oct-08 02:08:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764073 != 85764074 diff = 1)! 2010-Oct-08 02:08:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85764073 != 85764074 diff = 1)! 2010-Oct-08 02:08:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764073 != 85764074 diff = 1)! 2010-Oct-08 02:08:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85764073 != 85764074 diff = 1)! 2010-Oct-08 02:08:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764073 != 85764074 diff = 1)! 2010-Oct-08 02:08:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86285408 != 86285407 diff = 1)! 2010-Oct-08 02:08:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764076 != 85764075 diff = 1)! 2010-Oct-08 02:09:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.726 < 0.75)! 2010-Oct-08 02:09:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.726 0.000 0.000 0.000 2010-Oct-08 02:09:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 0.963 0.000 0.000 2010-Oct-08 02:09:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.962 0.000 0.000 0.000 2010-Oct-08 02:09:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 1.328 0.000 0.000 2010-Oct-08 02:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.743 and 1.347 (still bad) 2010-Oct-08 02:09:10 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.755 and 1.363 2010-Oct-08 02:09:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.730 < 0.75)! 2010-Oct-08 02:09:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.730 0.000 0.000 0.000 2010-Oct-08 02:09:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 0.925 0.000 0.000 2010-Oct-08 02:09:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.863 0.000 0.000 0.000 2010-Oct-08 02:09:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 1.342 0.000 0.000 2010-Oct-08 02:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.724 and 1.333 (still bad) 2010-Oct-08 02:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.720 and 1.328 (still bad) 2010-Oct-08 02:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.728 and 1.333 (still bad) 2010-Oct-08 02:09:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804178 != 85804177 diff = 1)! 2010-Oct-08 02:09:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804178 != 85804177 diff = 1)! 2010-Oct-08 02:09:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804178 != 85804177 diff = 1)! 2010-Oct-08 02:09:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804178 != 85804177 diff = 1)! 2010-Oct-08 02:09:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804178 != 85804177 diff = 1)! 2010-Oct-08 02:09:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804178 != 85804177 diff = 1)! 2010-Oct-08 02:09:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804178 != 85804177 diff = 1)! 2010-Oct-08 02:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.727 and 1.335 (still bad) 2010-Oct-08 02:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.728 and 1.335 (still bad) 2010-Oct-08 02:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.738 and 1.340 (still bad) 2010-Oct-08 02:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.738 and 1.338 (still bad) 2010-Oct-08 02:09:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804174 != 85804173 diff = 1)! 2010-Oct-08 02:09:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804174 != 85804173 diff = 1)! 2010-Oct-08 02:09:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804174 != 85804173 diff = 1)! 2010-Oct-08 02:09:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804174 != 85804173 diff = 1)! 2010-Oct-08 02:09:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804174 != 85804173 diff = 1)! 2010-Oct-08 02:09:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804174 != 85804173 diff = 1)! 2010-Oct-08 02:09:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804174 != 85804173 diff = 1)! 2010-Oct-08 02:09:28 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.861 and 1.481 2010-Oct-08 02:09:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804178 != 85804177 diff = 1)! 2010-Oct-08 02:09:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.717 < 0.75)! 2010-Oct-08 02:09:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.717 0.000 0.000 0.000 2010-Oct-08 02:09:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 0.908 0.000 0.000 2010-Oct-08 02:09:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.842 0.000 0.000 0.000 2010-Oct-08 02:09:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 1.320 0.000 0.000 2010-Oct-08 02:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.722 and 1.327 (still bad) 2010-Oct-08 02:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.719 and 1.324 (still bad) 2010-Oct-08 02:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.714 and 1.319 (still bad) 2010-Oct-08 02:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.716 and 1.322 (still bad) 2010-Oct-08 02:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.715 and 1.321 (still bad) 2010-Oct-08 02:09:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764064 != 85764063 diff = 1)! 2010-Oct-08 02:09:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764064 != 85764063 diff = 1)! 2010-Oct-08 02:09:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764064 != 85764063 diff = 1)! 2010-Oct-08 02:09:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764064 != 85764063 diff = 1)! 2010-Oct-08 02:09:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764064 != 85764063 diff = 1)! 2010-Oct-08 02:09:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764064 != 85764063 diff = 1)! 2010-Oct-08 02:09:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764064 != 85764063 diff = 1)! 2010-Oct-08 02:09:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764064 != 85764063 diff = 1)! 2010-Oct-08 02:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.713 and 1.321 (still bad) 2010-Oct-08 02:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.715 and 1.320 (still bad) 2010-Oct-08 02:10:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.890 and 1.458 2010-Oct-08 02:10:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85778556 != 85778555 diff = 1)! 2010-Oct-08 02:10:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86070438 != 86070437 diff = 1)! 2010-Oct-08 02:10:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86070438 != 86070437 diff = 1)! 2010-Oct-08 02:10:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804153 != 85804154 diff = 1)! 2010-Oct-08 02:10:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86044794 != 86044793 diff = 1)! 2010-Oct-08 02:10:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86044794 != 86044793 diff = 1)! 2010-Oct-08 02:10:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804194 != 85804193 diff = 1)! 2010-Oct-08 02:10:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804194 != 85804193 diff = 1)! 2010-Oct-08 02:10:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804180 != 85804179 diff = 1)! 2010-Oct-08 02:10:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804180 != 85804179 diff = 1)! 2010-Oct-08 02:10:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804180 != 85804179 diff = 1)! 2010-Oct-08 02:10:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804180 != 85804179 diff = 1)! 2010-Oct-08 02:10:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804180 != 85804179 diff = 1)! 2010-Oct-08 02:10:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804180 != 85804179 diff = 1)! 2010-Oct-08 02:10:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804180 != 85804179 diff = 1)! 2010-Oct-08 02:10:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85765849 != 85765850 diff = 1)! 2010-Oct-08 02:10:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85765849 != 85765850 diff = 1)! 2010-Oct-08 02:10:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85765849 != 85765850 diff = 1)! 2010-Oct-08 02:10:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.738 < 0.75)! 2010-Oct-08 02:10:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.738 0.000 0.000 0.000 2010-Oct-08 02:10:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 0.929 0.000 0.000 2010-Oct-08 02:10:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.891 0.000 0.000 0.000 2010-Oct-08 02:10:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 1.334 0.000 0.000 2010-Oct-08 02:10:35 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.875 and 1.469 2010-Oct-08 02:10:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.748 < 0.75)! 2010-Oct-08 02:10:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.748 0.000 0.000 0.000 2010-Oct-08 02:10:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 0.967 0.000 0.000 2010-Oct-08 02:10:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.968 0.000 0.000 0.000 2010-Oct-08 02:10:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 1.347 0.000 0.000 2010-Oct-08 02:10:41 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.913 and 1.475 2010-Oct-08 02:10:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.726 < 0.75)! 2010-Oct-08 02:10:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.726 0.000 0.000 0.000 2010-Oct-08 02:10:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 0.979 0.000 0.000 2010-Oct-08 02:10:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.995 0.000 0.000 0.000 2010-Oct-08 02:10:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 1.328 0.000 0.000 2010-Oct-08 02:10:51 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.763 and 1.358 2010-Oct-08 02:10:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.730 < 0.75)! 2010-Oct-08 02:10:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.730 0.000 0.000 0.000 2010-Oct-08 02:10:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 0.978 0.000 0.000 2010-Oct-08 02:10:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.994 0.000 0.000 0.000 2010-Oct-08 02:10:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 1.331 0.000 0.000 2010-Oct-08 02:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.718 and 1.321 (still bad) 2010-Oct-08 02:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.730 and 1.330 (still bad) 2010-Oct-08 02:11:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.862 and 1.433 2010-Oct-08 02:11:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.732 < 0.75)! 2010-Oct-08 02:11:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.732 0.000 0.000 0.000 2010-Oct-08 02:11:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 0.914 0.000 0.000 2010-Oct-08 02:11:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.866 0.000 0.000 0.000 2010-Oct-08 02:11:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 1.329 0.000 0.000 2010-Oct-08 02:11:11 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.759 and 1.358 2010-Oct-08 02:11:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.729 < 0.75)! 2010-Oct-08 02:11:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.729 0.000 0.000 0.000 2010-Oct-08 02:11:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 0.916 0.000 0.000 2010-Oct-08 02:11:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.856 0.000 0.000 0.000 2010-Oct-08 02:11:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 1.332 0.000 0.000 2010-Oct-08 02:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.722 and 1.329 (still bad) 2010-Oct-08 02:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.736 and 1.337 (still bad) 2010-Oct-08 02:11:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 02:11:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 02:11:19 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2010-Oct-08 02:11:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 02:11:19 LOG5 end_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2010-Oct-08 02:11:19 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2010-Oct-08 02:11:19 START begin_task: Starting task 'WAPP calibration' 2010-Oct-08 02:11:19 LOG5 begin_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2010-Oct-08 02:11:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Oct-08 02:11:19 START begin_task: Starting task 'selecting calibration type' 2010-Oct-08 02:11:19 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-Oct-08 02:11:19 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-08 02:11:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-08 02:11:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 02:11:19 START begin_task: Starting task 'waiting on setcal' 2010-Oct-08 02:11:19 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2010-Oct-08 02:11:19 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-08 02:11:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 02:11:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:11:19 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 02:11:19 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-08 02:11:19 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2010-Oct-08 02:11:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-08 02:11:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-08 02:11:19 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-Oct-08 02:11:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Oct-08 02:11:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Oct-08 02:11:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Oct-08 02:11:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-08 02:11:19 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2010-Oct-08 02:11:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:11:19 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-08 02:11:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Oct-08 02:11:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-08 02:11:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-08 02:11:19 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2010-Oct-08 02:11:19 LOG4 take_data: Calling 'take_data 10 10 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Oct-08 02:11:19 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 02:11:19 LOG5 begin_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2010-Oct-08 02:11:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Oct-08 02:11:20 INFO2 take_data: Starting WAPP 10-second scan: 28100019 2010-Oct-08 02:11:20 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 02:11:20 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2010-Oct-08 02:11:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 02:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.732 and 1.334 (still bad) 2010-Oct-08 02:11:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Oct-08 02:11:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22281.00 2010-Oct-08 02:11:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11351.289049 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 02:11:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:11:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:11:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:11:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.732 and 1.334 (still bad) 2010-Oct-08 02:11:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 02:11:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 02:11:31 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2010-Oct-08 02:11:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 02:11:31 LOG5 end_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2010-Oct-08 02:11:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Oct-08 02:11:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Oct-08 02:11:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Oct-08 02:11:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-08 02:11:31 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2010-Oct-08 02:11:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (859084937 != 859084938 diff = 1)! 2010-Oct-08 02:11:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (859084937 != 859084938 diff = 1)! 2010-Oct-08 02:11:31 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-08 02:11:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Oct-08 02:11:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-08 02:11:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-08 02:11:31 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2010-Oct-08 02:11:31 LOG4 take_data: Calling 'take_data 10 10 CAL OFF stat_cal_off {CAL-OFF spectra}' 2010-Oct-08 02:11:31 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 02:11:31 LOG5 begin_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2010-Oct-08 02:11:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2010-Oct-08 02:11:31 INFO2 take_data: Starting WAPP 10-second scan: 28100020 2010-Oct-08 02:11:32 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 02:11:32 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2010-Oct-08 02:11:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 02:11:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2010-Oct-08 02:11:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22293.00 2010-Oct-08 02:11:42 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.894 and 1.748 2010-Oct-08 02:11:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11351.289049 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 02:11:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:11:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:11:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:11:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1351.289049 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:11:43 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2010-Oct-08 02:11:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 02:11:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 02:11:43 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2010-Oct-08 02:11:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 02:11:43 LOG5 end_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2010-Oct-08 02:11:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-08 02:11:43 STOP finish_task: Finishing task 'WAPP calibration' 2010-Oct-08 02:11:43 LOG5 finish_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2010-Oct-08 02:11:43 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Oct-08 02:11:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:11:43 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Oct-08 02:11:43 LOG5 end_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2010-Oct-08 02:11:43 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-08 02:11:43 LOG5 begin_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2010-Oct-08 02:11:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-08 02:11:43 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-08 02:11:43 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023154+254620" 2010-Oct-08 02:11:43 LOG3 vw_send: To DATATAKING: pnt tr 23153.730000 254619.660000 -CJ 2010-Oct-08 02:11:43 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-08 02:11:43 LOG5 finish_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2010-Oct-08 02:11:43 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-08 02:11:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:11:43 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-08 02:11:43 LOG5 end_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2010-Oct-08 02:11:43 STOP finish_task: Finishing task 'standard on/off' 2010-Oct-08 02:11:43 LOG5 finish_task: Level: (1) ID = <10151> Status = 0 0 0 0 ok 2010-Oct-08 02:11:43 DONE finish_task: DONE finished pattern: standard on/off 2010-Oct-08 02:11:43 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-08 02:11:43 END end_task: Finishing task 'standard on/off' with status 'OK' 2010-Oct-08 02:11:43 LOG5 end_task: Level: (1) ID = <10151> Status = 0 0 0 0 ok 2010-Oct-08 02:11:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023154+254620" 2010-Oct-08 02:11:43 LOG4 got_cormsg: From DATATAKING: pnt tr 23153.730000 254619.660000 -CJ 2010-Oct-08 02:11:44 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 02:11:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.718 < 0.75)! 2010-Oct-08 02:11:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.718 0.000 0.000 0.000 2010-Oct-08 02:11:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 0.908 0.000 0.000 2010-Oct-08 02:11:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.843 0.000 0.000 0.000 2010-Oct-08 02:11:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 1.321 0.000 0.000 2010-Oct-08 02:11:58 COMMAND CIMA-send_to_exec: Sending command to point to a source 2010-Oct-08 02:11:58 LOG4 exec_msg: From OBSERVER: track_new_source j024133+263716 024133.11 263722.12 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 1592 Topocentric velocity(optical) 0 0 0.0 0.0 0 2010-Oct-08 02:11:58 LOG1 track_new_source: Calling 'track_new_source j024133+263716 024133.11 263722.12 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 1592 Topocentric velocity(optical) 0 0 0.0 0.0 0' 2010-Oct-08 02:11:58 BEGIN begin_task: Starting task 'selecting new source' 2010-Oct-08 02:11:58 LOG5 begin_task: Level: (1) ID = <10182> Status = 0 0 0 0 ok 2010-Oct-08 02:11:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {j024133+263716} INFO {Selecting source 'j024133+263716' ...} 2010-Oct-08 02:11:58 LOG3 track_source: Calling 'track_source j024133+263716 024133.11 263722.12 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 1592 Topocentric velocity(optical)' 2010-Oct-08 02:11:58 START begin_task: Starting task 'sending tracking commands' 2010-Oct-08 02:11:58 LOG5 begin_task: Level: (2) ID = <10183> Status = 0 0 0 0 ok 2010-Oct-08 02:11:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {j024133+263716} INFO {Slewing to source 'j024133+263716' ...} 2010-Oct-08 02:11:58 INFO1 track_source: Starting to track j024133+263716 2010-Oct-08 02:11:58 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j024133+263716" 2010-Oct-08 02:11:58 LOG3 vw_send: To DATATAKING: set ra 024133.11 2010-Oct-08 02:11:58 LOG3 vw_send: To DATATAKING: set dec 263722.12 2010-Oct-08 02:11:58 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Oct-08 02:11:59 LOG3 vw_send: To DATATAKING: pnt tr 024133.11 263722.12 -CJ 2010-Oct-08 02:11:59 LOG3 vw_send: To DATATAKING: dopsetvel 1592 topo 2010-Oct-08 02:11:59 STOP finish_task: Finishing task 'sending tracking commands' 2010-Oct-08 02:11:59 LOG5 finish_task: Level: (2) ID = <10183> Status = 0 0 0 0 ok 2010-Oct-08 02:11:59 INFO2 finish_task: DONE finished sending: tracking commands 2010-Oct-08 02:11:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:11:59 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Oct-08 02:11:59 LOG5 end_task: Level: (2) ID = <10183> Status = 0 0 0 0 ok 2010-Oct-08 02:11:59 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2010-Oct-08 02:11:59 START begin_task: Starting task 'applying pointing corrections' 2010-Oct-08 02:11:59 LOG5 begin_task: Level: (2) ID = <10184> Status = 0 0 0 0 ok 2010-Oct-08 02:11:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2010-Oct-08 02:11:59 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-08 02:11:59 STOP finish_task: Finishing task 'applying pointing corrections' 2010-Oct-08 02:11:59 LOG5 finish_task: Level: (2) ID = <10184> Status = 0 0 0 0 ok 2010-Oct-08 02:11:59 INFO2 finish_task: DONE finished applying: pointing corrections 2010-Oct-08 02:11:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:11:59 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2010-Oct-08 02:11:59 LOG5 end_task: Level: (2) ID = <10184> Status = 0 0 0 0 ok 2010-Oct-08 02:11:59 STOP finish_task: Finishing task 'selecting new source' 2010-Oct-08 02:11:59 LOG5 finish_task: Level: (1) ID = <10182> Status = 0 0 0 0 ok 2010-Oct-08 02:11:59 DONE finish_task: DONE finished selecting: new source 2010-Oct-08 02:11:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-08 02:11:59 END end_task: Finishing task 'selecting new source' with status 'OK' 2010-Oct-08 02:11:59 LOG5 end_task: Level: (1) ID = <10182> Status = 0 0 0 0 ok 2010-Oct-08 02:11:59 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j024133+263716" 2010-Oct-08 02:11:59 LOG4 got_cormsg: From DATATAKING: set ra 024133.11 2010-Oct-08 02:11:59 LOG4 got_cormsg: From DATATAKING: vw% 024133.11 2010-Oct-08 02:11:59 LOG4 got_cormsg: From DATATAKING: 2010-Oct-08 02:11:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:11:59 LOG4 got_cormsg: From DATATAKING: set dec 263722.12 2010-Oct-08 02:11:59 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Oct-08 02:11:59 LOG4 got_cormsg: From DATATAKING: pnt tr 024133.11 263722.12 -CJ 2010-Oct-08 02:11:59 LOG4 got_cormsg: From DATATAKING: dopsetvel 1592 topo 2010-Oct-08 02:11:59 LOG4 got_cormsg: From DATATAKING: 263722.12 2010-Oct-08 02:11:59 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2010-Oct-08 02:11:59 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-08 02:11:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:12:09 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2010-Oct-08 02:12:09 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 off lcorcal each first one 2010-Oct-08 02:12:09 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 off lcorcal each first one' 2010-Oct-08 02:12:09 BEGIN begin_task: Starting task 'standard on/off' 2010-Oct-08 02:12:09 LOG5 begin_task: Level: (1) ID = <10185> Status = 0 0 0 0 ok 2010-Oct-08 02:12:09 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'j024133+263716' 2010-Oct-08 02:12:09 INFO1 onoff_wapp: Starting pattern: Standard on/off 2010-Oct-08 02:12:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2010-Oct-08 02:12:09 START begin_task: Starting task 'waiting on telescope' 2010-Oct-08 02:12:09 LOG5 begin_task: Level: (2) ID = <10186> Status = 0 0 0 0 ok 2010-Oct-08 02:12:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-08 02:12:09 LOG3 waittrk: Start waittrk 5 2010-Oct-08 02:12:09 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-08 02:12:09 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2010-Oct-08 02:12:14 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-08 02:12:14 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2010-Oct-08 02:12:14 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-08 02:12:14 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2010-Oct-08 02:12:51 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-08 02:12:51 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2010-Oct-08 02:12:51 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-08 02:12:51 INFO2 waittrk: Now tracking j024133+263716 2010-Oct-08 02:12:51 LOG4 waittrk: Current telescope position: Az = 163.68 ZA = 8.68 2010-Oct-08 02:12:51 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-08 02:12:51 LOG5 finish_task: Level: (2) ID = <10186> Status = 0 0 0 0 ok 2010-Oct-08 02:12:51 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-08 02:12:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:12:51 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-08 02:12:51 LOG5 end_task: Level: (2) ID = <10186> Status = 0 0 0 0 ok 2010-Oct-08 02:12:51 START begin_task: Starting task 'selecting calibration type' 2010-Oct-08 02:12:51 LOG5 begin_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2010-Oct-08 02:12:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-08 02:12:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-08 02:12:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 02:12:51 START begin_task: Starting task 'waiting on setcal' 2010-Oct-08 02:12:51 LOG5 begin_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2010-Oct-08 02:12:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-08 02:12:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 02:12:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:12:51 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 02:12:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-08 02:12:51 LOG5 end_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2010-Oct-08 02:12:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-08 02:12:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-08 02:12:51 LOG5 end_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2010-Oct-08 02:12:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2010-Oct-08 02:12:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2010-Oct-08 02:12:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2010-Oct-08 02:12:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2010-Oct-08 02:12:51 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2010-Oct-08 02:12:51 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2010-Oct-08 02:12:51 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-08 02:12:51 LOG5 begin_task: Level: (2) ID = <10191> Status = 0 0 0 0 ok 2010-Oct-08 02:12:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-08 02:12:51 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-08 02:12:51 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j024133+263716" 2010-Oct-08 02:12:51 LOG3 vw_send: To DATATAKING: pnt tr 24133.110000 263722.120000 -CJ 2010-Oct-08 02:12:51 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-08 02:12:51 LOG5 finish_task: Level: (2) ID = <10191> Status = 0 0 0 0 ok 2010-Oct-08 02:12:51 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-08 02:12:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:12:52 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-08 02:12:52 LOG5 end_task: Level: (2) ID = <10191> Status = 0 0 0 0 ok 2010-Oct-08 02:12:52 START begin_task: Starting task 'waiting on telescope' 2010-Oct-08 02:12:52 LOG5 begin_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2010-Oct-08 02:12:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-08 02:12:52 LOG3 waittrk: Start waittrk 5 2010-Oct-08 02:12:52 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-08 02:12:52 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2010-Oct-08 02:12:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2010-Oct-08 02:12:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:12:52 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j024133+263716" 2010-Oct-08 02:12:52 LOG4 got_cormsg: From DATATAKING: pnt tr 24133.110000 263722.120000 -CJ 2010-Oct-08 02:12:52 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 02:12:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20101008.a2048.0005.fits 2010-Oct-08 02:12:52 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20101008.a2048.0005.fits} 2010-Oct-08 02:12:57 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-08 02:12:57 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2010-Oct-08 02:12:57 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-08 02:12:57 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2010-Oct-08 02:12:59 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-08 02:12:59 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2010-Oct-08 02:12:59 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-08 02:12:59 INFO2 waittrk: Now tracking j024133+263716 2010-Oct-08 02:12:59 LOG4 waittrk: Current telescope position: Az = 163.49 ZA = 8.68 2010-Oct-08 02:12:59 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-08 02:12:59 LOG5 finish_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2010-Oct-08 02:12:59 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-08 02:12:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:12:59 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-08 02:12:59 LOG5 end_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2010-Oct-08 02:12:59 LOG5 antvel: Calling 'antvel 24133.110000 263722.120000 J Topocentric 0' 2010-Oct-08 02:12:59 LOG2 antvel: Precessing RA = 02:41:33.1 Dec = +26:37:22.1 Epoch = 2010.76959 J 2010-Oct-08 02:12:59 LOG2 antvel: Computed apparent RA = 02:42:13.3 Dec = +26:40:16.0 2010-Oct-08 02:12:59 LOG2 antvel: Parameters to Doppler: Topocentric 22378 2010 281 0.0 2010-Oct-08 02:12:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Oct-08 02:12:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=1592.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-Oct-08 02:12:59 INFO4 dopset_gen: New sky frequencies: 1412.902757 1412.902757 1412.902757 1412.902757 1412.902757 1412.902757 1412.902757 1412.902757 1412.902757 2010-Oct-08 02:12:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1412.902757 sky0=1412.902757 sky1=1412.902757 sky2=1412.902757 sky3=1412.902757 sky4=1412.902757 sky5=1412.902757 sky6=1412.902757 sky7=1412.902757 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2010-Oct-08 02:12:59 LOG2 dopset_gen: Result from 'sky2syn': 11412.902757 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2010-Oct-08 02:12:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11412902757.0} 2010-Oct-08 02:12:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-08 02:12:59 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-08 02:12:59 LOG5 begin_task: Level: (2) ID = <10195> Status = 0 0 0 0 ok 2010-Oct-08 02:12:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Oct-08 02:12:59 INFO2 adjust_power: Starting to adjust WAPP power 2010-Oct-08 02:12:59 LOG3 vw_send: To DATATAKING: adjpwrif1 2010-Oct-08 02:12:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2010-Oct-08 02:12:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 02:12:59 START begin_task: Starting task 'waiting on adjpwrif1' 2010-Oct-08 02:12:59 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2010-Oct-08 02:12:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11412902757.0} 2010-Oct-08 02:12:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-08 02:12:59 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2010-Oct-08 02:12:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 02:12:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:12:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:12:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:12:59 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 02:12:59 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2010-Oct-08 02:12:59 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2010-Oct-08 02:12:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2010-Oct-08 02:12:59 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Oct-08 02:12:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Oct-08 02:13:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 02:13:00 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Oct-08 02:13:00 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2010-Oct-08 02:13:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:13:00 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Oct-08 02:13:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 02:13:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:13:01 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 02:13:01 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Oct-08 02:13:01 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2010-Oct-08 02:13:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Oct-08 02:13:01 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-08 02:13:01 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2010-Oct-08 02:13:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Oct-08 02:13:01 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2010-Oct-08 02:13:01 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2010-Oct-08 02:13:01 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2010-Oct-08 02:13:01 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2010-Oct-08 02:13:01 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Oct-08 02:13:01 LOG5 begin_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2010-Oct-08 02:13:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:13:01 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 11 12 dB 2010-Oct-08 02:13:02 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2010-Oct-08 02:13:02 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2010-Oct-08 02:13:02 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2010-Oct-08 02:13:02 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2010-Oct-08 02:13:02 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 13 0 dB 2010-Oct-08 02:13:02 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 2 10 dB 2010-Oct-08 02:13:02 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 3 13 dB 2010-Oct-08 02:13:02 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Oct-08 02:13:02 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Oct-08 02:13:02 LOG5 end_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2010-Oct-08 02:13:02 INFO2 wapp_adjpwr: WAPP power: 0.909 0.968 1.051 1.042 2010-Oct-08 02:13:02 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-08 02:13:02 LOG5 finish_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2010-Oct-08 02:13:02 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Oct-08 02:13:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:13:02 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-08 02:13:02 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2010-Oct-08 02:13:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-08 02:13:02 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-08 02:13:02 LOG5 finish_task: Level: (2) ID = <10195> Status = 0 0 0 0 ok 2010-Oct-08 02:13:02 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Oct-08 02:13:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:13:02 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-08 02:13:02 LOG5 end_task: Level: (2) ID = <10195> Status = 0 0 0 0 ok 2010-Oct-08 02:13:02 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON stat_onoff_on {ON scan}' 2010-Oct-08 02:13:02 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 02:13:02 LOG5 begin_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2010-Oct-08 02:13:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for ON scan ...} 2010-Oct-08 02:13:02 INFO2 take_data: Starting WAPP 300-second scan: 28100021 2010-Oct-08 02:13:02 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 02:13:02 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2010-Oct-08 02:13:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 02:13:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2010-Oct-08 02:13:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22383.00 2010-Oct-08 02:13:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11412.902757 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 02:13:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1412.902757 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:13:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1412.902757 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:13:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1412.902757 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:13:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1412.902757 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:13:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (86044849 != 86044850 diff = 1)! 2010-Oct-08 02:13:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (86044849 != 86044850 diff = 1)! 2010-Oct-08 02:13:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (86044849 != 86044850 diff = 1)! 2010-Oct-08 02:13:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804205 != 85804206 diff = 1)! 2010-Oct-08 02:13:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804205 != 85804206 diff = 1)! 2010-Oct-08 02:13:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804205 != 85804206 diff = 1)! 2010-Oct-08 02:13:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804205 != 85804206 diff = 1)! 2010-Oct-08 02:13:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85804205 != 85804206 diff = 1)! 2010-Oct-08 02:13:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804205 != 85804206 diff = 1)! 2010-Oct-08 02:13:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86350928 != 86350927 diff = 1)! 2010-Oct-08 02:13:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86350928 != 86350927 diff = 1)! 2010-Oct-08 02:13:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86350928 != 86350927 diff = 1)! 2010-Oct-08 02:13:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86350928 != 86350927 diff = 1)! 2010-Oct-08 02:13:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (86350928 != 86350927 diff = 1)! 2010-Oct-08 02:13:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86350928 != 86350927 diff = 1)! 2010-Oct-08 02:13:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85778850 != 85778849 diff = 1)! 2010-Oct-08 02:14:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804176 != 85804175 diff = 1)! 2010-Oct-08 02:14:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804176 != 85804175 diff = 1)! 2010-Oct-08 02:14:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85997791 != 85997790 diff = 1)! 2010-Oct-08 02:14:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85997791 != 85997792 diff = 1)! 2010-Oct-08 02:14:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85997791 != 85997792 diff = 1)! 2010-Oct-08 02:14:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85997791 != 85997792 diff = 1)! 2010-Oct-08 02:14:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85997791 != 85997792 diff = 1)! 2010-Oct-08 02:14:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85997791 != 85997790 diff = 1)! 2010-Oct-08 02:14:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85997791 != 85997792 diff = 1)! 2010-Oct-08 02:14:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804179 != 85804180 diff = 1)! 2010-Oct-08 02:14:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804179 != 85804180 diff = 1)! 2010-Oct-08 02:14:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804179 != 85804180 diff = 1)! 2010-Oct-08 02:14:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804179 != 85804180 diff = 1)! 2010-Oct-08 02:14:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804176 != 85804175 diff = 1)! 2010-Oct-08 02:14:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804176 != 85804175 diff = 1)! 2010-Oct-08 02:14:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804176 != 85804175 diff = 1)! 2010-Oct-08 02:14:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804176 != 85804175 diff = 1)! 2010-Oct-08 02:15:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804188 != 85804187 diff = 1)! 2010-Oct-08 02:15:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804188 != 85804187 diff = 1)! 2010-Oct-08 02:15:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804188 != 85804187 diff = 1)! 2010-Oct-08 02:15:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804188 != 85804187 diff = 1)! 2010-Oct-08 02:15:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764064 != 85764063 diff = 1)! 2010-Oct-08 02:15:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804196 != 85804195 diff = 1)! 2010-Oct-08 02:15:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85783740 != 85783739 diff = 1)! 2010-Oct-08 02:15:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85783740 != 85783739 diff = 1)! 2010-Oct-08 02:15:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85783740 != 85783739 diff = 1)! 2010-Oct-08 02:15:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85783740 != 85783739 diff = 1)! 2010-Oct-08 02:15:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85783740 != 85783739 diff = 1)! 2010-Oct-08 02:15:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85783740 != 85783739 diff = 1)! 2010-Oct-08 02:15:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85783740 != 85783739 diff = 1)! 2010-Oct-08 02:15:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764068 != 85764067 diff = 1)! 2010-Oct-08 02:15:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764068 != 85764067 diff = 1)! 2010-Oct-08 02:15:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764068 != 85764067 diff = 1)! 2010-Oct-08 02:15:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764068 != 85764067 diff = 1)! 2010-Oct-08 02:15:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764068 != 85764067 diff = 1)! 2010-Oct-08 02:15:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764068 != 85764067 diff = 1)! 2010-Oct-08 02:15:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764068 != 85764067 diff = 1)! 2010-Oct-08 02:15:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764068 != 85764067 diff = 1)! 2010-Oct-08 02:15:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764076 != 85764075 diff = 1)! 2010-Oct-08 02:15:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764076 != 85764075 diff = 1)! 2010-Oct-08 02:15:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764076 != 85764075 diff = 1)! 2010-Oct-08 02:15:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764076 != 85764075 diff = 1)! 2010-Oct-08 02:15:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764076 != 85764075 diff = 1)! 2010-Oct-08 02:15:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764076 != 85764075 diff = 1)! 2010-Oct-08 02:15:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764076 != 85764075 diff = 1)! 2010-Oct-08 02:15:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804179 != 85804180 diff = 1)! 2010-Oct-08 02:15:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804179 != 85804180 diff = 1)! 2010-Oct-08 02:15:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804179 != 85804180 diff = 1)! 2010-Oct-08 02:15:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764099 != 85764100 diff = 1)! 2010-Oct-08 02:15:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764099 != 85764100 diff = 1)! 2010-Oct-08 02:15:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764099 != 85764100 diff = 1)! 2010-Oct-08 02:16:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85800417 != 85800418 diff = 1)! 2010-Oct-08 02:16:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85800417 != 85800418 diff = 1)! 2010-Oct-08 02:16:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85800417 != 85800418 diff = 1)! 2010-Oct-08 02:16:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764073 != 85764072 diff = 1)! 2010-Oct-08 02:16:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764073 != 85764074 diff = 1)! 2010-Oct-08 02:16:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764073 != 85764074 diff = 1)! 2010-Oct-08 02:16:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764073 != 85764074 diff = 1)! 2010-Oct-08 02:16:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764073 != 85764072 diff = 1)! 2010-Oct-08 02:16:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764073 != 85764072 diff = 1)! 2010-Oct-08 02:16:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764073 != 85764072 diff = 1)! 2010-Oct-08 02:16:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764023 != 85764024 diff = 1)! 2010-Oct-08 02:16:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764023 != 85764024 diff = 1)! 2010-Oct-08 02:16:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764023 != 85764024 diff = 1)! 2010-Oct-08 02:16:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804177 != 85804178 diff = 1)! 2010-Oct-08 02:16:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804177 != 85804178 diff = 1)! 2010-Oct-08 02:16:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804177 != 85804178 diff = 1)! 2010-Oct-08 02:16:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804177 != 85804178 diff = 1)! 2010-Oct-08 02:16:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804177 != 85804178 diff = 1)! 2010-Oct-08 02:16:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85801025 != 85801026 diff = 1)! 2010-Oct-08 02:16:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85801025 != 85801026 diff = 1)! 2010-Oct-08 02:17:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86485948 != 86485947 diff = 1)! 2010-Oct-08 02:17:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86485948 != 86485947 diff = 1)! 2010-Oct-08 02:17:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86485948 != 86485947 diff = 1)! 2010-Oct-08 02:17:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764079 != 85764080 diff = 1)! 2010-Oct-08 02:18:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764088 != 85764087 diff = 1)! 2010-Oct-08 02:18:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764088 != 85764087 diff = 1)! 2010-Oct-08 02:18:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764088 != 85764087 diff = 1)! 2010-Oct-08 02:18:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764088 != 85764087 diff = 1)! 2010-Oct-08 02:18:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764088 != 85764087 diff = 1)! 2010-Oct-08 02:18:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 02:18:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 02:18:03 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2010-Oct-08 02:18:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 02:18:03 LOG5 end_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2010-Oct-08 02:18:03 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2010-Oct-08 02:18:03 LOG2 onoff_wapp: Parameters: RA-offset: -90.706200000000123 arcminutes wait: 60 secs 2010-Oct-08 02:18:03 LOG4 track_offsets: Calling 'track_offsets -90.706200000000123 0.0 main small' 2010-Oct-08 02:18:03 START begin_task: Starting task 'sending telescope offsets' 2010-Oct-08 02:18:03 LOG5 begin_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2010-Oct-08 02:18:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2010-Oct-08 02:18:03 INFO2 track_offsets: Starting to send new offsets 2010-Oct-08 02:18:03 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j024133+263716" 2010-Oct-08 02:18:03 LOG3 vw_send: To DATATAKING: pnt tr 24133.110000 263722.120000 -CJ -o -UD -1.51177 0.0 -CH 2010-Oct-08 02:18:03 STOP finish_task: Finishing task 'sending telescope offsets' 2010-Oct-08 02:18:03 LOG5 finish_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2010-Oct-08 02:18:03 INFO2 finish_task: DONE finished sending: telescope offsets 2010-Oct-08 02:18:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:18:03 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2010-Oct-08 02:18:03 LOG5 end_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2010-Oct-08 02:18:03 INFO2 lstwait: Waiting for 59.8 secs from LST 02:58:09 to LST 02:59:09 ... 2010-Oct-08 02:18:03 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836175999999789 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Oct-08 02:18:03 START begin_task: Starting task 'waiting on wait on LST' 2010-Oct-08 02:18:03 LOG5 begin_task: Level: (2) ID = <10203> Status = 0 0 0 0 ok 2010-Oct-08 02:18:03 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j024133+263716" 2010-Oct-08 02:18:03 LOG4 got_cormsg: From DATATAKING: pnt tr 24133.110000 263722.120000 -CJ -o -UD -1.51177 0.0 -CH 2010-Oct-08 02:18:03 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 02:18:34 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'j024133+263716' (after 31 seconds) 2010-Oct-08 02:18:34 LOG3 wait_and_tell_when_on_source: The telescope arrived at source with 29 seconds to spare (31 < 60 seconds) 2010-Oct-08 02:19:03 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-Oct-08 02:19:03 LOG5 end_task: Level: (2) ID = <10203> Status = 0 0 0 0 ok 2010-Oct-08 02:19:03 LOG4 lstwait: Finished waiting 0.16 seconds late 2010-Oct-08 02:19:03 INFO3 lstwait: Finished waiting 2010-Oct-08 02:19:03 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Oct-08 02:19:03 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF stat_onoff_off {OFF scan}' 2010-Oct-08 02:19:03 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 02:19:03 LOG5 begin_task: Level: (2) ID = <10204> Status = 0 0 0 0 ok 2010-Oct-08 02:19:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for OFF scan ...} 2010-Oct-08 02:19:03 INFO2 take_data: Starting WAPP 300-second scan: 28100022 2010-Oct-08 02:19:04 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 02:19:04 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2010-Oct-08 02:19:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 02:19:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2010-Oct-08 02:19:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22745.00 2010-Oct-08 02:19:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11412.902757 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 02:19:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1412.902757 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:19:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1412.902757 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:19:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1412.902757 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:19:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1412.902757 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:19:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86040568 != 86040567 diff = 1)! 2010-Oct-08 02:19:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86040568 != 86040567 diff = 1)! 2010-Oct-08 02:19:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86040568 != 86040567 diff = 1)! 2010-Oct-08 02:19:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86040568 != 86040567 diff = 1)! 2010-Oct-08 02:19:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804178 != 85804177 diff = 1)! 2010-Oct-08 02:19:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764072 != 85764071 diff = 1)! 2010-Oct-08 02:19:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764072 != 85764071 diff = 1)! 2010-Oct-08 02:19:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764072 != 85764071 diff = 1)! 2010-Oct-08 02:19:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764072 != 85764071 diff = 1)! 2010-Oct-08 02:19:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86004720 != 86004719 diff = 1)! 2010-Oct-08 02:19:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86004720 != 86004719 diff = 1)! 2010-Oct-08 02:19:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764072 != 85764071 diff = 1)! 2010-Oct-08 02:19:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764072 != 85764071 diff = 1)! 2010-Oct-08 02:19:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764072 != 85764071 diff = 1)! 2010-Oct-08 02:19:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764072 != 85764071 diff = 1)! 2010-Oct-08 02:19:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764072 != 85764071 diff = 1)! 2010-Oct-08 02:19:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764072 != 85764071 diff = 1)! 2010-Oct-08 02:19:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764072 != 85764071 diff = 1)! 2010-Oct-08 02:19:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85901320 != 85901319 diff = 1)! 2010-Oct-08 02:19:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85901320 != 85901319 diff = 1)! 2010-Oct-08 02:19:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85901320 != 85901319 diff = 1)! 2010-Oct-08 02:19:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85901320 != 85901319 diff = 1)! 2010-Oct-08 02:19:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85901320 != 85901319 diff = 1)! 2010-Oct-08 02:19:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85901320 != 85901319 diff = 1)! 2010-Oct-08 02:19:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85901320 != 85901319 diff = 1)! 2010-Oct-08 02:19:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85901320 != 85901319 diff = 1)! 2010-Oct-08 02:19:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764071 != 85764072 diff = 1)! 2010-Oct-08 02:19:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764071 != 85764072 diff = 1)! 2010-Oct-08 02:19:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85764071 != 85764072 diff = 1)! 2010-Oct-08 02:19:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764071 != 85764072 diff = 1)! 2010-Oct-08 02:19:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85764071 != 85764072 diff = 1)! 2010-Oct-08 02:19:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85764071 != 85764072 diff = 1)! 2010-Oct-08 02:19:59 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 55477.263854 to 55477.263866! 2010-Oct-08 02:20:00 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (55477.263854 - 55477.263877)! 2010-Oct-08 02:20:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804196 != 85804194 diff = 2)! 2010-Oct-08 02:20:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804196 != 85804194 diff = 2)! 2010-Oct-08 02:20:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804196 != 85804194 diff = 2)! 2010-Oct-08 02:20:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804196 != 85804194 diff = 2)! 2010-Oct-08 02:20:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804196 != 85804194 diff = 2)! 2010-Oct-08 02:20:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804196 != 85804194 diff = 2)! 2010-Oct-08 02:20:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764089 != 85764090 diff = 1)! 2010-Oct-08 02:20:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764089 != 85764090 diff = 1)! 2010-Oct-08 02:20:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764089 != 85764090 diff = 1)! 2010-Oct-08 02:20:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764089 != 85764090 diff = 1)! 2010-Oct-08 02:20:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764084 != 85764083 diff = 1)! 2010-Oct-08 02:20:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764074 != 85764073 diff = 1)! 2010-Oct-08 02:20:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764059 != 85764060 diff = 1)! 2010-Oct-08 02:20:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764059 != 85764060 diff = 1)! 2010-Oct-08 02:20:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764059 != 85764060 diff = 1)! 2010-Oct-08 02:21:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (87006735 != 87006736 diff = 1)! 2010-Oct-08 02:21:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (87006735 != 87006736 diff = 1)! 2010-Oct-08 02:21:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (87006735 != 87006736 diff = 1)! 2010-Oct-08 02:21:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (87006735 != 87006736 diff = 1)! 2010-Oct-08 02:21:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (87006735 != 87006736 diff = 1)! 2010-Oct-08 02:21:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (87006735 != 87006736 diff = 1)! 2010-Oct-08 02:21:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (87006735 != 87006736 diff = 1)! 2010-Oct-08 02:21:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86967223 != 86967222 diff = 1)! 2010-Oct-08 02:21:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86967223 != 86967222 diff = 1)! 2010-Oct-08 02:21:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86967223 != 86967222 diff = 1)! 2010-Oct-08 02:21:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (86967223 != 86967222 diff = 1)! 2010-Oct-08 02:21:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764091 != 85764090 diff = 1)! 2010-Oct-08 02:21:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (86766689 != 86766690 diff = 1)! 2010-Oct-08 02:21:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (86766689 != 86766690 diff = 1)! 2010-Oct-08 02:21:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (86766689 != 86766690 diff = 1)! 2010-Oct-08 02:21:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (86766689 != 86766690 diff = 1)! 2010-Oct-08 02:21:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (86766689 != 86766690 diff = 1)! 2010-Oct-08 02:21:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804168 != 85804167 diff = 1)! 2010-Oct-08 02:21:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804168 != 85804167 diff = 1)! 2010-Oct-08 02:21:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85788237 != 85788238 diff = 1)! 2010-Oct-08 02:21:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85788237 != 85788238 diff = 1)! 2010-Oct-08 02:21:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85788237 != 85788238 diff = 1)! 2010-Oct-08 02:22:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85798498 != 85798497 diff = 1)! 2010-Oct-08 02:22:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85798498 != 85798497 diff = 1)! 2010-Oct-08 02:22:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85798498 != 85798497 diff = 1)! 2010-Oct-08 02:22:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85798498 != 85798497 diff = 1)! 2010-Oct-08 02:22:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85798498 != 85798497 diff = 1)! 2010-Oct-08 02:22:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85798498 != 85798497 diff = 1)! 2010-Oct-08 02:22:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85768819 != 85768818 diff = 1)! 2010-Oct-08 02:22:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85768819 != 85768818 diff = 1)! 2010-Oct-08 02:22:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85768819 != 85768818 diff = 1)! 2010-Oct-08 02:22:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85768819 != 85768818 diff = 1)! 2010-Oct-08 02:22:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85768819 != 85768818 diff = 1)! 2010-Oct-08 02:22:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85768819 != 85768818 diff = 1)! 2010-Oct-08 02:22:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85768819 != 85768818 diff = 1)! 2010-Oct-08 02:23:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804179 != 85804180 diff = 1)! 2010-Oct-08 02:23:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804179 != 85804180 diff = 1)! 2010-Oct-08 02:23:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804179 != 85804180 diff = 1)! 2010-Oct-08 02:23:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804185 != 85804186 diff = 1)! 2010-Oct-08 02:23:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85804185 != 85804186 diff = 1)! 2010-Oct-08 02:23:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85804185 != 85804186 diff = 1)! 2010-Oct-08 02:23:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85803128 != 85803127 diff = 1)! 2010-Oct-08 02:23:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85803128 != 85803127 diff = 1)! 2010-Oct-08 02:23:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85803128 != 85803127 diff = 1)! 2010-Oct-08 02:23:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85803128 != 85803127 diff = 1)! 2010-Oct-08 02:23:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85803128 != 85803127 diff = 1)! 2010-Oct-08 02:23:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85803128 != 85803127 diff = 1)! 2010-Oct-08 02:23:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85803128 != 85803127 diff = 1)! 2010-Oct-08 02:24:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 02:24:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 02:24:05 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2010-Oct-08 02:24:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 02:24:05 LOG5 end_task: Level: (2) ID = <10204> Status = 0 0 0 0 ok 2010-Oct-08 02:24:05 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2010-Oct-08 02:24:05 START begin_task: Starting task 'WAPP calibration' 2010-Oct-08 02:24:05 LOG5 begin_task: Level: (2) ID = <10206> Status = 0 0 0 0 ok 2010-Oct-08 02:24:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Oct-08 02:24:05 START begin_task: Starting task 'selecting calibration type' 2010-Oct-08 02:24:05 LOG5 begin_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2010-Oct-08 02:24:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-08 02:24:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-08 02:24:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 02:24:05 START begin_task: Starting task 'waiting on setcal' 2010-Oct-08 02:24:05 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2010-Oct-08 02:24:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-08 02:24:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 02:24:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:24:05 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 02:24:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-08 02:24:05 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2010-Oct-08 02:24:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-08 02:24:05 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-08 02:24:05 LOG5 end_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2010-Oct-08 02:24:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Oct-08 02:24:05 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Oct-08 02:24:05 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Oct-08 02:24:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-08 02:24:05 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2010-Oct-08 02:24:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:24:06 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-08 02:24:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Oct-08 02:24:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-08 02:24:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-08 02:24:06 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2010-Oct-08 02:24:06 LOG4 take_data: Calling 'take_data 10 10 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Oct-08 02:24:06 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 02:24:06 LOG5 begin_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2010-Oct-08 02:24:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Oct-08 02:24:06 INFO2 take_data: Starting WAPP 10-second scan: 28100023 2010-Oct-08 02:24:06 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 02:24:06 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2010-Oct-08 02:24:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 02:24:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23047.00 2010-Oct-08 02:24:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Oct-08 02:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11412.902757 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 02:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1412.902757 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1412.902757 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1412.902757 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1412.902757 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:24:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 02:24:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 02:24:17 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2010-Oct-08 02:24:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 02:24:17 LOG5 end_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2010-Oct-08 02:24:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Oct-08 02:24:17 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Oct-08 02:24:17 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Oct-08 02:24:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-08 02:24:17 LOG5 begin_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2010-Oct-08 02:24:17 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-08 02:24:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Oct-08 02:24:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-08 02:24:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-08 02:24:17 LOG5 end_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2010-Oct-08 02:24:17 LOG4 take_data: Calling 'take_data 10 10 CAL OFF stat_cal_off {CAL-OFF spectra}' 2010-Oct-08 02:24:17 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 02:24:17 LOG5 begin_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2010-Oct-08 02:24:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2010-Oct-08 02:24:17 INFO2 take_data: Starting WAPP 10-second scan: 28100024 2010-Oct-08 02:24:18 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 02:24:18 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2010-Oct-08 02:24:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 02:24:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2010-Oct-08 02:24:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23059.00 2010-Oct-08 02:24:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11412.902757 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 02:24:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1412.902757 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:24:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1412.902757 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:24:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1412.902757 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:24:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1412.902757 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:24:29 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2010-Oct-08 02:24:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 02:24:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 02:24:29 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2010-Oct-08 02:24:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 02:24:29 LOG5 end_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2010-Oct-08 02:24:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-08 02:24:29 STOP finish_task: Finishing task 'WAPP calibration' 2010-Oct-08 02:24:29 LOG5 finish_task: Level: (2) ID = <10206> Status = 0 0 0 0 ok 2010-Oct-08 02:24:29 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Oct-08 02:24:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:24:29 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Oct-08 02:24:29 LOG5 end_task: Level: (2) ID = <10206> Status = 0 0 0 0 ok 2010-Oct-08 02:24:29 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-08 02:24:29 LOG5 begin_task: Level: (2) ID = <10215> Status = 0 0 0 0 ok 2010-Oct-08 02:24:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-08 02:24:29 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-08 02:24:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j024133+263716" 2010-Oct-08 02:24:29 LOG3 vw_send: To DATATAKING: pnt tr 24133.110000 263722.120000 -CJ 2010-Oct-08 02:24:29 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-08 02:24:29 LOG5 finish_task: Level: (2) ID = <10215> Status = 0 0 0 0 ok 2010-Oct-08 02:24:29 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-08 02:24:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:24:29 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-08 02:24:29 LOG5 end_task: Level: (2) ID = <10215> Status = 0 0 0 0 ok 2010-Oct-08 02:24:29 STOP finish_task: Finishing task 'standard on/off' 2010-Oct-08 02:24:29 LOG5 finish_task: Level: (1) ID = <10185> Status = 0 0 0 0 ok 2010-Oct-08 02:24:29 DONE finish_task: DONE finished pattern: standard on/off 2010-Oct-08 02:24:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-08 02:24:30 END end_task: Finishing task 'standard on/off' with status 'OK' 2010-Oct-08 02:24:30 LOG5 end_task: Level: (1) ID = <10185> Status = 0 0 0 0 ok 2010-Oct-08 02:24:30 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j024133+263716" 2010-Oct-08 02:24:30 LOG4 got_cormsg: From DATATAKING: pnt tr 24133.110000 263722.120000 -CJ 2010-Oct-08 02:24:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 02:24:42 COMMAND CIMA-send_to_exec: Sending command to point to a source 2010-Oct-08 02:24:42 LOG4 exec_msg: From OBSERVER: track_new_source j023052+252434 023051.81 252433.76 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 5188 Topocentric velocity(optical) 0 0 0.0 0.0 0 2010-Oct-08 02:24:42 LOG1 track_new_source: Calling 'track_new_source j023052+252434 023051.81 252433.76 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 5188 Topocentric velocity(optical) 0 0 0.0 0.0 0' 2010-Oct-08 02:24:42 BEGIN begin_task: Starting task 'selecting new source' 2010-Oct-08 02:24:42 LOG5 begin_task: Level: (1) ID = <10216> Status = 0 0 0 0 ok 2010-Oct-08 02:24:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {j023052+252434} INFO {Selecting source 'j023052+252434' ...} 2010-Oct-08 02:24:42 LOG3 track_source: Calling 'track_source j023052+252434 023051.81 252433.76 J 0 0 main small /share/obs4/usr/a2048/u2082fu.cat 5188 Topocentric velocity(optical)' 2010-Oct-08 02:24:42 START begin_task: Starting task 'sending tracking commands' 2010-Oct-08 02:24:42 LOG5 begin_task: Level: (2) ID = <10217> Status = 0 0 0 0 ok 2010-Oct-08 02:24:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {j023052+252434} INFO {Slewing to source 'j023052+252434' ...} 2010-Oct-08 02:24:42 INFO1 track_source: Starting to track j023052+252434 2010-Oct-08 02:24:42 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023052+252434" 2010-Oct-08 02:24:42 LOG3 vw_send: To DATATAKING: set ra 023051.81 2010-Oct-08 02:24:42 LOG3 vw_send: To DATATAKING: set dec 252433.76 2010-Oct-08 02:24:42 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Oct-08 02:24:42 LOG3 vw_send: To DATATAKING: pnt tr 023051.81 252433.76 -CJ 2010-Oct-08 02:24:42 LOG3 vw_send: To DATATAKING: dopsetvel 5188 topo 2010-Oct-08 02:24:42 STOP finish_task: Finishing task 'sending tracking commands' 2010-Oct-08 02:24:42 LOG5 finish_task: Level: (2) ID = <10217> Status = 0 0 0 0 ok 2010-Oct-08 02:24:42 INFO2 finish_task: DONE finished sending: tracking commands 2010-Oct-08 02:24:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:24:42 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Oct-08 02:24:42 LOG5 end_task: Level: (2) ID = <10217> Status = 0 0 0 0 ok 2010-Oct-08 02:24:42 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2010-Oct-08 02:24:42 START begin_task: Starting task 'applying pointing corrections' 2010-Oct-08 02:24:42 LOG5 begin_task: Level: (2) ID = <10218> Status = 0 0 0 0 ok 2010-Oct-08 02:24:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2010-Oct-08 02:24:42 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-08 02:24:42 STOP finish_task: Finishing task 'applying pointing corrections' 2010-Oct-08 02:24:42 LOG5 finish_task: Level: (2) ID = <10218> Status = 0 0 0 0 ok 2010-Oct-08 02:24:42 INFO2 finish_task: DONE finished applying: pointing corrections 2010-Oct-08 02:24:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:24:42 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2010-Oct-08 02:24:42 LOG5 end_task: Level: (2) ID = <10218> Status = 0 0 0 0 ok 2010-Oct-08 02:24:42 STOP finish_task: Finishing task 'selecting new source' 2010-Oct-08 02:24:42 LOG5 finish_task: Level: (1) ID = <10216> Status = 0 0 0 0 ok 2010-Oct-08 02:24:42 DONE finish_task: DONE finished selecting: new source 2010-Oct-08 02:24:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-08 02:24:42 END end_task: Finishing task 'selecting new source' with status 'OK' 2010-Oct-08 02:24:42 LOG5 end_task: Level: (1) ID = <10216> Status = 0 0 0 0 ok 2010-Oct-08 02:24:42 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023052+252434" 2010-Oct-08 02:24:42 LOG4 got_cormsg: From DATATAKING: set ra 023051.81 2010-Oct-08 02:24:42 LOG4 got_cormsg: From DATATAKING: set dec 252433.76 2010-Oct-08 02:24:42 LOG4 got_cormsg: From DATATAKING: vw% 023051.81 2010-Oct-08 02:24:42 LOG4 got_cormsg: From DATATAKING: vw% 252433.76 2010-Oct-08 02:24:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:24:42 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Oct-08 02:24:42 LOG4 got_cormsg: From DATATAKING: pnt tr 023051.81 252433.76 -CJ 2010-Oct-08 02:24:42 LOG4 got_cormsg: From DATATAKING: dopsetvel 5188 topo 2010-Oct-08 02:24:42 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 02:24:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:24:42 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2010-Oct-08 02:24:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:24:45 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2010-Oct-08 02:24:45 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 off lcorcal each first one 2010-Oct-08 02:24:45 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 off lcorcal each first one' 2010-Oct-08 02:24:45 BEGIN begin_task: Starting task 'standard on/off' 2010-Oct-08 02:24:45 LOG5 begin_task: Level: (1) ID = <10219> Status = 0 0 0 0 ok 2010-Oct-08 02:24:45 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'j023052+252434' 2010-Oct-08 02:24:45 INFO1 onoff_wapp: Starting pattern: Standard on/off 2010-Oct-08 02:24:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2010-Oct-08 02:24:45 START begin_task: Starting task 'waiting on telescope' 2010-Oct-08 02:24:45 LOG5 begin_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2010-Oct-08 02:24:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-08 02:24:45 LOG3 waittrk: Start waittrk 5 2010-Oct-08 02:24:45 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-08 02:24:45 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2010-Oct-08 02:24:50 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-08 02:24:50 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2010-Oct-08 02:24:50 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-08 02:24:50 LOG5 begin_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2010-Oct-08 02:25:38 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-08 02:25:38 LOG5 end_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2010-Oct-08 02:25:39 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-08 02:25:39 INFO2 waittrk: Now tracking j023052+252434 2010-Oct-08 02:25:39 LOG4 waittrk: Current telescope position: Az = 133.11 ZA = 10.65 2010-Oct-08 02:25:39 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-08 02:25:39 LOG5 finish_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2010-Oct-08 02:25:39 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-08 02:25:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:25:39 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-08 02:25:39 LOG5 end_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2010-Oct-08 02:25:39 START begin_task: Starting task 'selecting calibration type' 2010-Oct-08 02:25:39 LOG5 begin_task: Level: (2) ID = <10223> Status = 0 0 0 0 ok 2010-Oct-08 02:25:39 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-08 02:25:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-08 02:25:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 02:25:39 START begin_task: Starting task 'waiting on setcal' 2010-Oct-08 02:25:39 LOG5 begin_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2010-Oct-08 02:25:39 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-08 02:25:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 02:25:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:25:39 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 02:25:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-08 02:25:39 LOG5 end_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2010-Oct-08 02:25:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-08 02:25:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-08 02:25:39 LOG5 end_task: Level: (2) ID = <10223> Status = 0 0 0 0 ok 2010-Oct-08 02:25:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2010-Oct-08 02:25:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2010-Oct-08 02:25:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2010-Oct-08 02:25:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2010-Oct-08 02:25:39 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2010-Oct-08 02:25:39 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2010-Oct-08 02:25:39 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-08 02:25:39 LOG5 begin_task: Level: (2) ID = <10225> Status = 0 0 0 0 ok 2010-Oct-08 02:25:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-08 02:25:39 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-08 02:25:39 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023052+252434" 2010-Oct-08 02:25:39 LOG3 vw_send: To DATATAKING: pnt tr 23051.810000 252433.760000 -CJ 2010-Oct-08 02:25:39 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-08 02:25:39 LOG5 finish_task: Level: (2) ID = <10225> Status = 0 0 0 0 ok 2010-Oct-08 02:25:39 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-08 02:25:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:25:39 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-08 02:25:39 LOG5 end_task: Level: (2) ID = <10225> Status = 0 0 0 0 ok 2010-Oct-08 02:25:39 START begin_task: Starting task 'waiting on telescope' 2010-Oct-08 02:25:39 LOG5 begin_task: Level: (2) ID = <10226> Status = 0 0 0 0 ok 2010-Oct-08 02:25:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Oct-08 02:25:39 LOG3 waittrk: Start waittrk 5 2010-Oct-08 02:25:39 START begin_task: Starting task 'waiting on telescope movement' 2010-Oct-08 02:25:39 LOG5 begin_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2010-Oct-08 02:25:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2010-Oct-08 02:25:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:25:39 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023052+252434" 2010-Oct-08 02:25:39 LOG4 got_cormsg: From DATATAKING: pnt tr 23051.810000 252433.760000 -CJ 2010-Oct-08 02:25:39 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 02:25:40 NOTE WAPPDATA-new_file: New FITS file: wapp.20101008.a2048.0006.fits 2010-Oct-08 02:25:40 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20101008.a2048.0006.fits} 2010-Oct-08 02:25:44 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Oct-08 02:25:44 LOG5 end_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2010-Oct-08 02:25:44 START begin_task: Starting task 'waiting on telescope on source' 2010-Oct-08 02:25:44 LOG5 begin_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2010-Oct-08 02:25:46 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Oct-08 02:25:46 LOG5 end_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2010-Oct-08 02:25:47 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Oct-08 02:25:47 INFO2 waittrk: Now tracking j023052+252434 2010-Oct-08 02:25:47 LOG4 waittrk: Current telescope position: Az = 133.00 ZA = 10.67 2010-Oct-08 02:25:47 STOP finish_task: Finishing task 'waiting on telescope' 2010-Oct-08 02:25:47 LOG5 finish_task: Level: (2) ID = <10226> Status = 0 0 0 0 ok 2010-Oct-08 02:25:47 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Oct-08 02:25:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:25:47 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Oct-08 02:25:47 LOG5 end_task: Level: (2) ID = <10226> Status = 0 0 0 0 ok 2010-Oct-08 02:25:47 LOG5 antvel: Calling 'antvel 23051.810000 252433.760000 J Topocentric 0' 2010-Oct-08 02:25:47 LOG2 antvel: Precessing RA = 02:30:51.8 Dec = +25:24:33.8 Epoch = 2010.76961 J 2010-Oct-08 02:25:47 LOG2 antvel: Computed apparent RA = 02:31:31.5 Dec = +25:27:34.7 2010-Oct-08 02:25:47 LOG2 antvel: Parameters to Doppler: Topocentric 23146 2010 281 0.0 2010-Oct-08 02:25:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Oct-08 02:25:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=5188.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-Oct-08 02:25:47 INFO4 dopset_gen: New sky frequencies: 1396.243335 1396.243335 1396.243335 1396.243335 1396.243335 1396.243335 1396.243335 1396.243335 1396.243335 2010-Oct-08 02:25:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1396.243335 sky0=1396.243335 sky1=1396.243335 sky2=1396.243335 sky3=1396.243335 sky4=1396.243335 sky5=1396.243335 sky6=1396.243335 sky7=1396.243335 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2010-Oct-08 02:25:47 LOG2 dopset_gen: Result from 'sky2syn': 11396.243335 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2010-Oct-08 02:25:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11396243335.0} 2010-Oct-08 02:25:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-08 02:25:47 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-08 02:25:47 LOG5 begin_task: Level: (2) ID = <10229> Status = 0 0 0 0 ok 2010-Oct-08 02:25:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Oct-08 02:25:47 INFO2 adjust_power: Starting to adjust WAPP power 2010-Oct-08 02:25:47 LOG3 vw_send: To DATATAKING: adjpwrif1 2010-Oct-08 02:25:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2010-Oct-08 02:25:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 02:25:47 START begin_task: Starting task 'waiting on adjpwrif1' 2010-Oct-08 02:25:47 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2010-Oct-08 02:25:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11396243335.0} 2010-Oct-08 02:25:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2010-Oct-08 02:25:47 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2010-Oct-08 02:25:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 02:25:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:25:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:25:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:25:47 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 02:25:47 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2010-Oct-08 02:25:47 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2010-Oct-08 02:25:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2010-Oct-08 02:25:47 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Oct-08 02:25:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Oct-08 02:25:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 02:25:47 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Oct-08 02:25:47 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2010-Oct-08 02:25:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:25:47 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Oct-08 02:25:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 02:25:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:25:47 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 02:25:47 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Oct-08 02:25:47 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2010-Oct-08 02:25:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Oct-08 02:25:47 START begin_task: Starting task 'adjusting WAPP power' 2010-Oct-08 02:25:47 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2010-Oct-08 02:25:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Oct-08 02:25:48 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2010-Oct-08 02:25:48 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2010-Oct-08 02:25:48 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2010-Oct-08 02:25:48 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2010-Oct-08 02:25:48 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Oct-08 02:25:48 LOG5 begin_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2010-Oct-08 02:25:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:25:48 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 11 12 dB 2010-Oct-08 02:25:48 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2010-Oct-08 02:25:48 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2010-Oct-08 02:25:48 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2010-Oct-08 02:25:48 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2010-Oct-08 02:25:48 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 14 0 dB 2010-Oct-08 02:25:48 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 2 10 dB 2010-Oct-08 02:25:48 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 3 13 dB 2010-Oct-08 02:25:48 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Oct-08 02:25:48 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Oct-08 02:25:48 LOG5 end_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2010-Oct-08 02:25:48 INFO2 wapp_adjpwr: WAPP power: 1.000 0.977 0.895 1.063 2010-Oct-08 02:25:48 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-08 02:25:48 LOG5 finish_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2010-Oct-08 02:25:48 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Oct-08 02:25:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:25:48 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-08 02:25:48 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2010-Oct-08 02:25:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-08 02:25:48 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Oct-08 02:25:48 LOG5 finish_task: Level: (2) ID = <10229> Status = 0 0 0 0 ok 2010-Oct-08 02:25:48 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Oct-08 02:25:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:25:48 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Oct-08 02:25:48 LOG5 end_task: Level: (2) ID = <10229> Status = 0 0 0 0 ok 2010-Oct-08 02:25:48 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON stat_onoff_on {ON scan}' 2010-Oct-08 02:25:48 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 02:25:48 LOG5 begin_task: Level: (2) ID = <10234> Status = 0 0 0 0 ok 2010-Oct-08 02:25:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for ON scan ...} 2010-Oct-08 02:25:48 INFO2 take_data: Starting WAPP 300-second scan: 28100025 2010-Oct-08 02:25:49 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 02:25:49 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2010-Oct-08 02:25:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 02:25:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2010-Oct-08 02:25:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23150.00 2010-Oct-08 02:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11396.243335 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 02:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:26:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86044816 != 86044815 diff = 1)! 2010-Oct-08 02:26:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86044816 != 86044815 diff = 1)! 2010-Oct-08 02:26:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86044816 != 86044815 diff = 1)! 2010-Oct-08 02:26:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86044816 != 86044815 diff = 1)! 2010-Oct-08 02:26:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86044816 != 86044815 diff = 1)! 2010-Oct-08 02:26:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804191 != 85804192 diff = 1)! 2010-Oct-08 02:26:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85804191 != 85804192 diff = 1)! 2010-Oct-08 02:26:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804191 != 85804192 diff = 1)! 2010-Oct-08 02:26:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86084952 != 86084951 diff = 1)! 2010-Oct-08 02:27:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764054 != 85764053 diff = 1)! 2010-Oct-08 02:27:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764076 != 85764075 diff = 1)! 2010-Oct-08 02:27:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764076 != 85764075 diff = 1)! 2010-Oct-08 02:27:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764076 != 85764075 diff = 1)! 2010-Oct-08 02:27:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764076 != 85764075 diff = 1)! 2010-Oct-08 02:27:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764076 != 85764075 diff = 1)! 2010-Oct-08 02:27:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764076 != 85764075 diff = 1)! 2010-Oct-08 02:27:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764076 != 85764075 diff = 1)! 2010-Oct-08 02:27:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764076 != 85764075 diff = 1)! 2010-Oct-08 02:27:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86125040 != 86125039 diff = 1)! 2010-Oct-08 02:27:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86125040 != 86125039 diff = 1)! 2010-Oct-08 02:27:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86125040 != 86125039 diff = 1)! 2010-Oct-08 02:27:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86125040 != 86125039 diff = 1)! 2010-Oct-08 02:27:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (86125040 != 86125039 diff = 1)! 2010-Oct-08 02:27:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (86125040 != 86125039 diff = 1)! 2010-Oct-08 02:27:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86125040 != 86125039 diff = 1)! 2010-Oct-08 02:27:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85787844 != 85787843 diff = 1)! 2010-Oct-08 02:27:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804188 != 85804187 diff = 1)! 2010-Oct-08 02:28:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.361 < 0.75)! 2010-Oct-08 02:28:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.411 0.000 0.000 0.000 2010-Oct-08 02:28:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 0.563 0.000 0.000 2010-Oct-08 02:28:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.361 0.000 0.000 0.000 2010-Oct-08 02:28:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 0.626 0.000 0.000 2010-Oct-08 02:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.170 and 0.435 (still bad) 2010-Oct-08 02:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.517 and 0.759 (still bad) 2010-Oct-08 02:28:15 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.871 and 0.981 2010-Oct-08 02:28:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.617 < 0.75)! 2010-Oct-08 02:28:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.694 0.000 0.000 0.000 2010-Oct-08 02:28:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 0.782 0.000 0.000 2010-Oct-08 02:28:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.617 0.000 0.000 0.000 2010-Oct-08 02:28:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 0.861 0.000 0.000 2010-Oct-08 02:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.218 and 0.280 (still bad) 2010-Oct-08 02:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.249 and 0.549 (still bad) 2010-Oct-08 02:28:23 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.801 and 1.022 2010-Oct-08 02:28:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764081 != 85764082 diff = 1)! 2010-Oct-08 02:28:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764081 != 85764082 diff = 1)! 2010-Oct-08 02:28:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764081 != 85764082 diff = 1)! 2010-Oct-08 02:28:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764081 != 85764082 diff = 1)! 2010-Oct-08 02:28:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85764081 != 85764082 diff = 1)! 2010-Oct-08 02:28:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764081 != 85764082 diff = 1)! 2010-Oct-08 02:28:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85784339 != 85784340 diff = 1)! 2010-Oct-08 02:29:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804183 != 85804184 diff = 1)! 2010-Oct-08 02:29:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804183 != 85804184 diff = 1)! 2010-Oct-08 02:29:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804183 != 85804184 diff = 1)! 2010-Oct-08 02:29:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804183 != 85804184 diff = 1)! 2010-Oct-08 02:29:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804201 != 85804202 diff = 1)! 2010-Oct-08 02:29:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804201 != 85804202 diff = 1)! 2010-Oct-08 02:29:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85804201 != 85804202 diff = 1)! 2010-Oct-08 02:29:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804201 != 85804202 diff = 1)! 2010-Oct-08 02:29:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85804201 != 85804202 diff = 1)! 2010-Oct-08 02:29:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85804201 != 85804202 diff = 1)! 2010-Oct-08 02:29:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86165128 != 86165127 diff = 1)! 2010-Oct-08 02:29:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86165128 != 86165127 diff = 1)! 2010-Oct-08 02:29:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86165128 != 86165127 diff = 1)! 2010-Oct-08 02:29:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86165128 != 86165127 diff = 1)! 2010-Oct-08 02:29:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (86165128 != 86165127 diff = 1)! 2010-Oct-08 02:29:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (86165128 != 86165127 diff = 1)! 2010-Oct-08 02:29:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86165128 != 86165127 diff = 1)! 2010-Oct-08 02:29:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (86165128 != 86165127 diff = 1)! 2010-Oct-08 02:29:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85775990 != 85775989 diff = 1)! 2010-Oct-08 02:29:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85775990 != 85775989 diff = 1)! 2010-Oct-08 02:29:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85775990 != 85775989 diff = 1)! 2010-Oct-08 02:29:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764084 != 85764083 diff = 1)! 2010-Oct-08 02:29:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804202 != 85804201 diff = 1)! 2010-Oct-08 02:29:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86044854 != 86044853 diff = 1)! 2010-Oct-08 02:29:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86044854 != 86044853 diff = 1)! 2010-Oct-08 02:29:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86044854 != 86044853 diff = 1)! 2010-Oct-08 02:29:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86044854 != 86044853 diff = 1)! 2010-Oct-08 02:29:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (86044854 != 86044853 diff = 1)! 2010-Oct-08 02:29:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (86044854 != 86044853 diff = 1)! 2010-Oct-08 02:29:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86044854 != 86044853 diff = 1)! 2010-Oct-08 02:29:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85789255 != 85789256 diff = 1)! 2010-Oct-08 02:29:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85789255 != 85789256 diff = 1)! 2010-Oct-08 02:29:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85789255 != 85789256 diff = 1)! 2010-Oct-08 02:29:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85789255 != 85789256 diff = 1)! 2010-Oct-08 02:30:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804168 != 85804167 diff = 1)! 2010-Oct-08 02:30:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86285430 != 86285429 diff = 1)! 2010-Oct-08 02:30:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86285430 != 86285429 diff = 1)! 2010-Oct-08 02:30:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86285430 != 86285429 diff = 1)! 2010-Oct-08 02:30:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86285430 != 86285429 diff = 1)! 2010-Oct-08 02:30:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (86285430 != 86285429 diff = 1)! 2010-Oct-08 02:30:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (86285430 != 86285429 diff = 1)! 2010-Oct-08 02:30:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86285430 != 86285429 diff = 1)! 2010-Oct-08 02:30:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (86285430 != 86285429 diff = 1)! 2010-Oct-08 02:30:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85781145 != 85781146 diff = 1)! 2010-Oct-08 02:30:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 02:30:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 02:30:50 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2010-Oct-08 02:30:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 02:30:50 LOG5 end_task: Level: (2) ID = <10234> Status = 0 0 0 0 ok 2010-Oct-08 02:30:50 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2010-Oct-08 02:30:50 LOG2 onoff_wapp: Parameters: RA-offset: -90.707100000000253 arcminutes wait: 60 secs 2010-Oct-08 02:30:50 LOG4 track_offsets: Calling 'track_offsets -90.707100000000253 0.0 main small' 2010-Oct-08 02:30:50 START begin_task: Starting task 'sending telescope offsets' 2010-Oct-08 02:30:50 LOG5 begin_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2010-Oct-08 02:30:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2010-Oct-08 02:30:50 INFO2 track_offsets: Starting to send new offsets 2010-Oct-08 02:30:50 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023052+252434" 2010-Oct-08 02:30:50 LOG3 vw_send: To DATATAKING: pnt tr 23051.810000 252433.760000 -CJ -o -UD -1.51179 0.0 -CH 2010-Oct-08 02:30:50 STOP finish_task: Finishing task 'sending telescope offsets' 2010-Oct-08 02:30:50 LOG5 finish_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2010-Oct-08 02:30:50 INFO2 finish_task: DONE finished sending: telescope offsets 2010-Oct-08 02:30:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:30:50 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2010-Oct-08 02:30:50 LOG5 end_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2010-Oct-08 02:30:50 INFO2 lstwait: Waiting for 59.8 secs from LST 03:10:58 to LST 03:11:58 ... 2010-Oct-08 02:30:50 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836175999999789 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Oct-08 02:30:50 START begin_task: Starting task 'waiting on wait on LST' 2010-Oct-08 02:30:50 LOG5 begin_task: Level: (2) ID = <10237> Status = 0 0 0 0 ok 2010-Oct-08 02:30:50 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023052+252434" 2010-Oct-08 02:30:50 LOG4 got_cormsg: From DATATAKING: pnt tr 23051.810000 252433.760000 -CJ -o -UD -1.51179 0.0 -CH 2010-Oct-08 02:30:50 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 02:31:25 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'j023052+252434' (after 35 seconds) 2010-Oct-08 02:31:25 LOG3 wait_and_tell_when_on_source: The telescope arrived at source with 25 seconds to spare (35 < 60 seconds) 2010-Oct-08 02:31:50 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-Oct-08 02:31:50 LOG5 end_task: Level: (2) ID = <10237> Status = 0 0 0 0 ok 2010-Oct-08 02:31:50 LOG4 lstwait: Finished waiting 0.16 seconds late 2010-Oct-08 02:31:50 INFO3 lstwait: Finished waiting 2010-Oct-08 02:31:50 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Oct-08 02:31:50 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF stat_onoff_off {OFF scan}' 2010-Oct-08 02:31:50 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 02:31:50 LOG5 begin_task: Level: (2) ID = <10238> Status = 0 0 0 0 ok 2010-Oct-08 02:31:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for OFF scan ...} 2010-Oct-08 02:31:50 INFO2 take_data: Starting WAPP 300-second scan: 28100026 2010-Oct-08 02:31:51 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 02:31:51 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2010-Oct-08 02:31:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 02:31:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2010-Oct-08 02:31:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23512.00 2010-Oct-08 02:31:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11396.243335 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 02:31:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:31:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:31:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:31:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:31:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764080 != 85764079 diff = 1)! 2010-Oct-08 02:31:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764080 != 85764079 diff = 1)! 2010-Oct-08 02:32:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764094 != 85764093 diff = 1)! 2010-Oct-08 02:32:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764094 != 85764093 diff = 1)! 2010-Oct-08 02:32:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764094 != 85764093 diff = 1)! 2010-Oct-08 02:32:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764094 != 85764093 diff = 1)! 2010-Oct-08 02:32:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764094 != 85764093 diff = 1)! 2010-Oct-08 02:32:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764094 != 85764093 diff = 1)! 2010-Oct-08 02:32:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764094 != 85764093 diff = 1)! 2010-Oct-08 02:32:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85772247 != 85772248 diff = 1)! 2010-Oct-08 02:32:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85772247 != 85772248 diff = 1)! 2010-Oct-08 02:32:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85772247 != 85772248 diff = 1)! 2010-Oct-08 02:32:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85793704 != 85793703 diff = 1)! 2010-Oct-08 02:32:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85793704 != 85793703 diff = 1)! 2010-Oct-08 02:32:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85793704 != 85793703 diff = 1)! 2010-Oct-08 02:32:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85793704 != 85793703 diff = 1)! 2010-Oct-08 02:33:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86004740 != 86004739 diff = 1)! 2010-Oct-08 02:33:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86004740 != 86004739 diff = 1)! 2010-Oct-08 02:33:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86004740 != 86004739 diff = 1)! 2010-Oct-08 02:33:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86004740 != 86004739 diff = 1)! 2010-Oct-08 02:33:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86004740 != 86004739 diff = 1)! 2010-Oct-08 02:33:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85935110 != 85935109 diff = 1)! 2010-Oct-08 02:33:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85935110 != 85935109 diff = 1)! 2010-Oct-08 02:33:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804161 != 85804162 diff = 1)! 2010-Oct-08 02:34:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85787905 != 85787906 diff = 1)! 2010-Oct-08 02:34:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85787905 != 85787906 diff = 1)! 2010-Oct-08 02:34:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85787905 != 85787906 diff = 1)! 2010-Oct-08 02:34:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85787905 != 85787906 diff = 1)! 2010-Oct-08 02:34:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (86044835 != 86044836 diff = 1)! 2010-Oct-08 02:34:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (86044835 != 86044836 diff = 1)! 2010-Oct-08 02:34:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (86044835 != 86044836 diff = 1)! 2010-Oct-08 02:34:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85796287 != 85796288 diff = 1)! 2010-Oct-08 02:34:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85796287 != 85796288 diff = 1)! 2010-Oct-08 02:34:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85796287 != 85796288 diff = 1)! 2010-Oct-08 02:34:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85796287 != 85796288 diff = 1)! 2010-Oct-08 02:34:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85788384 != 85788383 diff = 1)! 2010-Oct-08 02:34:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85788384 != 85788383 diff = 1)! 2010-Oct-08 02:34:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85788384 != 85788383 diff = 1)! 2010-Oct-08 02:34:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85788384 != 85788383 diff = 1)! 2010-Oct-08 02:34:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85788384 != 85788383 diff = 1)! 2010-Oct-08 02:34:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85788384 != 85788383 diff = 1)! 2010-Oct-08 02:34:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85788384 != 85788383 diff = 1)! 2010-Oct-08 02:34:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764079 != 85764078 diff = 1)! 2010-Oct-08 02:34:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764093 != 85764094 diff = 1)! 2010-Oct-08 02:35:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85924526 != 85924525 diff = 1)! 2010-Oct-08 02:35:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85924526 != 85924525 diff = 1)! 2010-Oct-08 02:35:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764086 != 85764085 diff = 1)! 2010-Oct-08 02:36:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85787450 != 85787449 diff = 1)! 2010-Oct-08 02:36:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85791668 != 85791667 diff = 1)! 2010-Oct-08 02:36:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 02:36:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 02:36:52 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2010-Oct-08 02:36:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 02:36:52 LOG5 end_task: Level: (2) ID = <10238> Status = 0 0 0 0 ok 2010-Oct-08 02:36:52 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2010-Oct-08 02:36:52 START begin_task: Starting task 'WAPP calibration' 2010-Oct-08 02:36:52 LOG5 begin_task: Level: (2) ID = <10240> Status = 0 0 0 0 ok 2010-Oct-08 02:36:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Oct-08 02:36:52 START begin_task: Starting task 'selecting calibration type' 2010-Oct-08 02:36:52 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2010-Oct-08 02:36:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Oct-08 02:36:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Oct-08 02:36:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 02:36:52 START begin_task: Starting task 'waiting on setcal' 2010-Oct-08 02:36:52 LOG5 begin_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2010-Oct-08 02:36:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Oct-08 02:36:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Oct-08 02:36:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:36:52 LOG4 got_cormsg: From DATATAKING: DONE 2010-Oct-08 02:36:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Oct-08 02:36:52 LOG5 end_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2010-Oct-08 02:36:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Oct-08 02:36:52 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Oct-08 02:36:52 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2010-Oct-08 02:36:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Oct-08 02:36:52 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Oct-08 02:36:52 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Oct-08 02:36:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-08 02:36:52 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2010-Oct-08 02:36:52 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-08 02:36:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:36:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Oct-08 02:36:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-08 02:36:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-08 02:36:52 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2010-Oct-08 02:36:53 LOG4 take_data: Calling 'take_data 10 10 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Oct-08 02:36:53 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 02:36:53 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2010-Oct-08 02:36:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Oct-08 02:36:53 INFO2 take_data: Starting WAPP 10-second scan: 28100027 2010-Oct-08 02:36:53 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 02:36:53 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2010-Oct-08 02:36:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 02:36:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Oct-08 02:36:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23814.00 2010-Oct-08 02:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11396.243335 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 02:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:37:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 02:37:04 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 02:37:04 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2010-Oct-08 02:37:04 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 02:37:04 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2010-Oct-08 02:37:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Oct-08 02:37:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Oct-08 02:37:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Oct-08 02:37:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Oct-08 02:37:04 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2010-Oct-08 02:37:04 LOG3 CALCONTROL-caltrig: Software trigger 2010-Oct-08 02:37:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Oct-08 02:37:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Oct-08 02:37:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Oct-08 02:37:04 LOG5 end_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2010-Oct-08 02:37:04 LOG4 take_data: Calling 'take_data 10 10 CAL OFF stat_cal_off {CAL-OFF spectra}' 2010-Oct-08 02:37:04 START begin_task: Starting task 'WAPP spectral observation' 2010-Oct-08 02:37:04 LOG5 begin_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2010-Oct-08 02:37:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2010-Oct-08 02:37:04 INFO2 take_data: Starting WAPP 10-second scan: 28100028 2010-Oct-08 02:37:05 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Oct-08 02:37:05 LOG5 begin_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2010-Oct-08 02:37:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Oct-08 02:37:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2010-Oct-08 02:37:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23826.00 2010-Oct-08 02:37:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11396.243335 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2010-Oct-08 02:37:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:37:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:37:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:37:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1396.243335 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2010-Oct-08 02:37:16 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2010-Oct-08 02:37:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Oct-08 02:37:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Oct-08 02:37:16 LOG5 end_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2010-Oct-08 02:37:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Oct-08 02:37:16 LOG5 end_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2010-Oct-08 02:37:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Oct-08 02:37:16 STOP finish_task: Finishing task 'WAPP calibration' 2010-Oct-08 02:37:16 LOG5 finish_task: Level: (2) ID = <10240> Status = 0 0 0 0 ok 2010-Oct-08 02:37:16 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Oct-08 02:37:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:37:16 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Oct-08 02:37:16 LOG5 end_task: Level: (2) ID = <10240> Status = 0 0 0 0 ok 2010-Oct-08 02:37:16 START begin_task: Starting task 'clearing telescope offsets' 2010-Oct-08 02:37:16 LOG5 begin_task: Level: (2) ID = <10249> Status = 0 0 0 0 ok 2010-Oct-08 02:37:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2010-Oct-08 02:37:16 INFO3 clear_offsets: Removing telescope offsets 2010-Oct-08 02:37:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "j023052+252434" 2010-Oct-08 02:37:16 LOG3 vw_send: To DATATAKING: pnt tr 23051.810000 252433.760000 -CJ 2010-Oct-08 02:37:16 STOP finish_task: Finishing task 'clearing telescope offsets' 2010-Oct-08 02:37:16 LOG5 finish_task: Level: (2) ID = <10249> Status = 0 0 0 0 ok 2010-Oct-08 02:37:16 INFO2 finish_task: DONE finished clearing: telescope offsets 2010-Oct-08 02:37:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Oct-08 02:37:16 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2010-Oct-08 02:37:16 LOG5 end_task: Level: (2) ID = <10249> Status = 0 0 0 0 ok 2010-Oct-08 02:37:16 STOP finish_task: Finishing task 'standard on/off' 2010-Oct-08 02:37:16 LOG5 finish_task: Level: (1) ID = <10219> Status = 0 0 0 0 ok 2010-Oct-08 02:37:16 DONE finish_task: DONE finished pattern: standard on/off 2010-Oct-08 02:37:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Oct-08 02:37:17 END end_task: Finishing task 'standard on/off' with status 'OK' 2010-Oct-08 02:37:17 LOG5 end_task: Level: (1) ID = <10219> Status = 0 0 0 0 ok 2010-Oct-08 02:37:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "j023052+252434" 2010-Oct-08 02:37:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (858174034 != 858174035 diff = 1)! 2010-Oct-08 02:37:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (858174034 != 858174035 diff = 1)! 2010-Oct-08 02:37:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (858174034 != 858174035 diff = 1)! 2010-Oct-08 02:37:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (858174034 != 858174035 diff = 1)! 2010-Oct-08 02:37:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (858174034 != 858174035 diff = 1)! 2010-Oct-08 02:37:17 LOG4 got_cormsg: From DATATAKING: pnt tr 23051.810000 252433.760000 -CJ 2010-Oct-08 02:37:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Oct-08 02:37:24 ALERT CIMA-exit_cima: Exiting CIMA ... 2010-Oct-08 02:37:24 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2010-Oct-08 02:37:24 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2010-Oct-08 02:37:24 LOG3 vw_send: To DATATAKING: mvdata a2048 2010-Oct-08 02:37:24 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2010-Oct-08 02:37:24 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2010-Oct-08 02:37:24 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2010-Oct-08 02:37:24 NOTE CIMA-exit_cima: Cleaning up session ... 2010-Oct-08 02:37:24 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2010-Oct-08 02:37:24 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2010-Oct-08 02:37:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:37:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Oct-08 02:37:26 LOG3 exec_msg: Closing socket