2010-May-24 19:30:38 BEGIN executive: CIMA executive starting ... 2010-May-24 19:30:38 NOTE executive: STARTING NEW CIMA SESSION 2010-May-24 19:30:38 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2010-May-24 19:30:38 INFO4 executive: This is an ON-LINE session 2010-May-24 19:30:38 INFO4 executive: This is a REMOTE session 2010-May-24 19:30:38 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2010-May-24 19:30:38 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'RT' 2010-May-24 19:30:38 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20100524' 2010-May-24 19:30:39 LOG2 log_preferences: Currently applied preferences: 2010-May-24 19:30:39 LOG2 log_preferences: prefs(dailylog) = daily 2010-May-24 19:30:39 LOG2 log_preferences: prefs(offlinelog) = skip 2010-May-24 19:30:39 LOG2 log_preferences: prefs(datawindow) = ignore 2010-May-24 19:30:39 LOG2 log_preferences: prefs(limitwarning) = enabled 2010-May-24 19:30:39 LOG2 log_preferences: prefs(wappfailure) = abort 2010-May-24 19:30:39 LOG2 log_preferences: prefs(helpstyle) = stay-open 2010-May-24 19:30:39 LOG2 log_preferences: prefs(logcolours) = full 2010-May-24 19:30:39 LOG2 log_preferences: prefs(displaylevel) = INFO3 2010-May-24 19:30:39 LOG2 log_preferences: prefs(loglevel) = LOG5 2010-May-24 19:30:39 LOG2 log_preferences: prefs(displayformat) = short 2010-May-24 19:30:39 LOG2 log_preferences: prefs(logformat) = new 2010-May-24 19:30:39 LOG2 log_preferences: prefs(fontsize) = 4 2010-May-24 19:30:39 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2010-May-24 19:30:39 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2010-May-24 19:30:39 ALERT executive: CIMA executive ready 2010-May-24 19:30:41 NOTE frontend: CIMA frontend ready 2010-May-24 19:30:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:30:42 LOG4 got_cormsg: From DATATAKING: setup 2010-May-24 19:30:48 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2010-May-24 19:30:48 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2010-May-24 19:30:48 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2010-May-24 19:30:48 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2010-May-24 19:30:48 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-May-24 19:30:48 NOTE select_receiver: Starting to select receiver ALFA 2010-May-24 19:30:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-May-24 19:30:48 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-May-24 19:30:48 LOG3 vw_send: To DATATAKING: acvlbical off 2010-May-24 19:30:48 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-May-24 19:30:48 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-May-24 19:30:48 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-May-24 19:30:48 DONE finish_task: DONE finished selecting: receiver ALFA 2010-May-24 19:30:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-24 19:30:48 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-May-24 19:30:48 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-May-24 19:30:49 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2010-May-24 19:30:49 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2010-May-24 19:30:49 LOG4 got_cormsg: From DATATAKING: vw% io 2010-May-24 19:30:49 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2010-May-24 19:30:49 LOG4 got_cormsg: From DATATAKING: 2010-May-24 19:30:49 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2010-May-24 19:30:49 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2010-May-24 19:30:49 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2010-May-24 19:30:49 LOG4 got_cormsg: From DATATAKING: vw% connectall 2010-May-24 19:30:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2010-May-24 19:30:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2010-May-24 19:30:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2010-May-24 19:30:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2010-May-24 19:30:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2010-May-24 19:30:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2010-May-24 19:30:49 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2010-May-24 19:30:49 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2010-May-24 19:30:50 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2010-May-24 19:30:50 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-May-24 19:30:50 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-May-24 19:30:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:30:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:30:56 LOG4 got_cormsg: From DATATAKING: waiting for turret position:26.64 2010-May-24 19:31:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:31:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:31:33 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima31.cmd' (at lines 1 - 24) 2010-May-24 19:31:33 INFO4 CIMA-load_command_file: Loaded command file '100524.cmd' 2010-May-24 19:31:47 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-May-24 19:31:47 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-May-24 19:31:47 LOG5 restart_wapp: Calling 'restart_wapp' 2010-May-24 19:31:47 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-May-24 19:31:47 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-May-24 19:31:47 NOTE restart_wapp: Restarting all WAPPs 2010-May-24 19:31:47 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-May-24 19:31:47 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-May-24 19:31:47 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-May-24 19:31:47 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-May-24 19:31:50 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-May-24 19:31:50 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-May-24 19:31:50 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-May-24 19:31:50 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-May-24 19:32:26 INFO1 CIMA-run_command_file: Transferring command file '100524.cmd' to executive ... 2010-May-24 19:32:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima31.conf} 2010-May-24 19:32:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2010-May-24 19:32:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2010-May-24 19:32:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2010-May-24 19:32:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2010-May-24 19:32:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2010-May-24 19:32:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2010-May-24 19:32:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2010-May-24 19:32:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2010-May-24 19:32:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2010-May-24 19:32:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2010-May-24 19:32:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2010-May-24 19:32:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2010-May-24 19:32:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 27 {LOAD ages_mock.conf} 2010-May-24 19:32:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 28 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2010-May-24 19:32:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 29 {CATALOG AGESFull.cat} 2010-May-24 19:32:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 32 {IF LSTSLEW(AGESVC1A_p3_001) < 114333 THEN} 2010-May-24 19:32:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 33 {FIXEDDRIFT az=325.31 alfaangle=48.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p3_001 ra=120900.00 dec=90000.00} 2010-May-24 19:32:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 36 {ENDIF} 2010-May-24 19:32:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 39 {IF LSTSLEW(AGESVC1B_p2_038) < 120632 THEN} 2010-May-24 19:32:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 40 {FIXEDDRIFT az=330.85 alfaangle=43.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_038 ra=122900.00 dec=80430.00} 2010-May-24 19:32:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 43 {ENDIF} 2010-May-24 19:32:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 46 {IF LSTSLEW(AGESVC1B_p2_040) < 122932 THEN} 2010-May-24 19:32:27 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 47 {FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_040 ra=122900.00 dec=80130.00} 2010-May-24 19:32:27 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 50 {ENDIF} 2010-May-24 19:32:27 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 53 {IF LSTSLEW(AGESVC1B_p3_001) < 125232 THEN} 2010-May-24 19:32:27 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 54 {FIXEDDRIFT az=31.42 alfaangle=-7.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_001 ra=122900.00 dec=90000.00} 2010-May-24 19:32:27 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 57 {ENDIF} 2010-May-24 19:32:27 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-May-24 19:32:27 LOG4 exec_msg: From OBSERVER: run_command_file 100524.cmd 1 1 28 2010-May-24 19:32:27 LOG4 run_command_file: Calling 'run_command_file 100524.cmd 1 1 28' 2010-May-24 19:32:27 BEGIN begin_task: Starting task 'running command file '100524.cmd'' 2010-May-24 19:32:27 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-May-24 19:32:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100524.cmd' ...} 2010-May-24 19:32:27 NOTE run_command_file: Starting execution of command file '100524.cmd' from line 1 2010-May-24 19:32:27 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima31.conf' 2010-May-24 19:32:27 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-May-24 19:32:27 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-24 19:32:27 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-May-24 19:32:27 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2010-May-24 19:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-May-24 19:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-May-24 19:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-May-24 19:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-May-24 19:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-May-24 19:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-May-24 19:32:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-May-24 19:32:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-May-24 19:32:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-May-24 19:32:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-May-24 19:32:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-May-24 19:32:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-24 19:32:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-24 19:32:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-24 19:32:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-24 19:32:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-May-24 19:32:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-May-24 19:32:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-May-24 19:32:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-May-24 19:32:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-May-24 19:32:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-May-24 19:32:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-May-24 19:32:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-May-24 19:32:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-24 19:32:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-24 19:32:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-24 19:32:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-24 19:32:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-May-24 19:32:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-May-24 19:32:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-May-24 19:32:29 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-24 19:32:29 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-May-24 19:32:29 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-May-24 19:32:29 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-May-24 19:32:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-May-24 19:32:29 INFO1 config_iflo: Selecting receiver ALFA 2010-May-24 19:32:29 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2010-May-24 19:32:29 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2010-May-24 19:32:29 START begin_task: Starting task 'selecting receiver ALFA' 2010-May-24 19:32:29 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-May-24 19:32:29 NOTE select_receiver: Starting to select receiver ALFA 2010-May-24 19:32:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-May-24 19:32:29 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-May-24 19:32:29 LOG3 vw_send: To DATATAKING: acvlbical off 2010-May-24 19:32:29 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-May-24 19:32:29 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-May-24 19:32:29 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-May-24 19:32:29 INFO2 finish_task: DONE finished selecting: receiver ALFA 2010-May-24 19:32:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 19:32:29 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-May-24 19:32:29 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-May-24 19:32:29 START begin_task: Starting task 'waiting for receiver ALFA' 2010-May-24 19:32:29 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-May-24 19:32:29 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2010-May-24 19:32:29 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-May-24 19:32:29 INFO1 config_iflo: Configuring rest of the IF/LO path 2010-May-24 19:32:29 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2010-May-24 19:32:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 19:32:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-24 19:32:29 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 19:32:29 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-May-24 19:32:29 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 19:32:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 19:32:29 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-May-24 19:32:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 19:32:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-24 19:32:29 LOG3 vw_send: To DATATAKING: alfafb 1 2010-May-24 19:32:29 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2010-May-24 19:32:29 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-May-24 19:32:29 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-May-24 19:32:29 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2010-May-24 19:32:29 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2010-May-24 19:32:30 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2010-May-24 19:32:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-May-24 19:32:30 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2010-May-24 19:32:30 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2010-May-24 19:32:30 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-May-24 19:32:30 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-May-24 19:32:30 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-May-24 19:32:30 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-May-24 19:32:30 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-May-24 19:32:30 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2010-May-24 19:32:30 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2010-May-24 19:32:30 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2010-May-24 19:32:30 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2010-May-24 19:32:30 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-May-24 19:32:30 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2010-May-24 19:32:30 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-May-24 19:32:30 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-May-24 19:32:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:32:30 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-May-24 19:32:30 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2010-May-24 19:32:30 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-May-24 19:32:30 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2010-May-24 19:32:30 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2010-May-24 19:32:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-May-24 19:32:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 19:32:30 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-May-24 19:32:30 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-May-24 19:32:30 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-May-24 19:32:30 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-May-24 19:32:30 LOG4 got_cormsg: From DATATAKING: alfafb 1 2010-May-24 19:32:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2010-May-24 19:32:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2010-May-24 19:32:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2010-May-24 19:32:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2010-May-24 19:32:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-May-24 19:32:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2010-May-24 19:32:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2010-May-24 19:32:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2010-May-24 19:32:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2010-May-24 19:32:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2010-May-24 19:32:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2010-May-24 19:32:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-May-24 19:32:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2010-May-24 19:32:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-May-24 19:32:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:32:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-May-24 19:32:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2010-May-24 19:32:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2010-May-24 19:32:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2010-May-24 19:32:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 19:32:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:45 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 19:32:45 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-May-24 19:32:45 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-May-24 19:32:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-May-24 19:32:45 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-May-24 19:32:45 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-May-24 19:32:45 DONE finish_task: DONE finished configuration: IF/LO path 2010-May-24 19:32:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-24 19:32:46 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-May-24 19:32:46 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-May-24 19:32:46 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-May-24 19:32:46 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-May-24 19:32:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-May-24 19:32:46 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-May-24 19:32:46 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-May-24 19:32:46 START begin_task: Starting task 'selecting calibration port' 2010-May-24 19:32:46 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-May-24 19:32:46 LOG3 vw_send: To DATATAKING: calport 3 2010-May-24 19:32:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-May-24 19:32:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 19:32:46 START begin_task: Starting task 'waiting on calport' 2010-May-24 19:32:46 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2010-May-24 19:32:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:46 LOG4 got_cormsg: From DATATAKING: calport 3 2010-May-24 19:32:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 19:32:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:46 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 19:32:46 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-May-24 19:32:46 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2010-May-24 19:32:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-May-24 19:32:46 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-May-24 19:32:46 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-May-24 19:32:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-24 19:32:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-24 19:32:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 19:32:46 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-May-24 19:32:46 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 19:32:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-24 19:32:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 19:32:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 19:32:46 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-May-24 19:32:46 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-May-24 19:32:46 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-May-24 19:32:46 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-May-24 19:32:46 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-May-24 19:32:46 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-May-24 19:32:46 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-May-24 19:32:46 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-May-24 19:32:46 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-May-24 19:32:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-24 19:32:46 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-24 19:32:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-24 19:32:46 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-24 19:32:46 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-May-24 19:32:46 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-May-24 19:32:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 19:32:46 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-May-24 19:32:46 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 19:32:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-24 19:32:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 19:32:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 19:32:46 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-May-24 19:32:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-24 19:32:46 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-24 19:32:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-24 19:32:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-24 19:32:47 STOP finish_task: Finishing task 'configuring WAPPs' 2010-May-24 19:32:47 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-May-24 19:32:47 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-May-24 19:32:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-24 19:32:47 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-May-24 19:32:47 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-May-24 19:32:47 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2010-May-24 19:32:47 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2010-May-24 19:32:47 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2010-May-24 19:32:47 LOG3 is_if_valid: Current source data: up 310.0 14.2 UP - - 115 1.8 2010-May-24 19:32:47 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2010-May-24 19:32:47 INFO5 is_if_valid: Condition parsed as: 1 2010-May-24 19:32:47 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2010-May-24 19:32:47 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2010-May-24 19:32:47 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2010-May-24 19:32:47 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-May-24 19:32:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2010-May-24 19:32:47 LOG3 track_source: Calling 'track_source galfasrc 115900.0 +090000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2010-May-24 19:32:47 START begin_task: Starting task 'sending tracking commands' 2010-May-24 19:32:47 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-May-24 19:32:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2010-May-24 19:32:47 INFO1 track_source: Starting to track galfasrc 2010-May-24 19:32:47 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2010-May-24 19:32:47 LOG3 vw_send: To DATATAKING: set ra 115900.0 2010-May-24 19:32:47 LOG3 vw_send: To DATATAKING: set dec +090000 2010-May-24 19:32:47 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-24 19:32:47 LOG3 vw_send: To DATATAKING: pnt tr 115900.0 +090000 -CJ 2010-May-24 19:32:47 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-May-24 19:32:47 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-24 19:32:47 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-May-24 19:32:47 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-24 19:32:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 19:32:47 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-24 19:32:47 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-May-24 19:32:47 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2010-May-24 19:32:47 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-May-24 19:32:47 DONE finish_task: DONE finished tracking: source 'galfasrc' 2010-May-24 19:32:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-24 19:32:47 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2010-May-24 19:32:48 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-May-24 19:32:48 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2010-May-24 19:32:48 INFO1 run_command_line: Skipping line 'ELSEIF isup(galfasrc2) then' since an earlier condition already has been true 2010-May-24 19:32:48 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2010-May-24 19:32:48 INFO1 run_command_line: Skipping line 'GOTO galfasrc2' in non-true conditional branch 2010-May-24 19:32:48 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2010-May-24 19:32:48 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2010-May-24 19:32:48 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2010-May-24 19:32:48 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2010-May-24 19:32:48 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2010-May-24 19:32:48 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2010-May-24 19:32:48 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2010-May-24 19:32:48 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2010-May-24 19:32:48 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2010-May-24 19:32:48 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-May-24 19:32:48 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2010-May-24 19:32:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-May-24 19:32:48 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-May-24 19:32:48 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-May-24 19:32:48 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-May-24 19:32:48 START begin_task: Starting task 'waiting on ALFA rotation' 2010-May-24 19:32:48 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2010-May-24 19:32:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-24 19:32:48 NOTE WAPPDATA-new_file: New FITS file: wapp.20100524.a2048.0000.fits 2010-May-24 19:32:48 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2010-May-24 19:32:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-May-24 19:32:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-May-24 19:32:48 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20100524.a2048.0000.fits} 2010-May-24 19:32:48 LOG4 got_cormsg: From DATATAKING: set ra 115900.0 2010-May-24 19:32:48 LOG4 got_cormsg: From DATATAKING: set dec +090000 2010-May-24 19:32:48 LOG4 got_cormsg: From DATATAKING: vw% 115900.0 2010-May-24 19:32:48 LOG4 got_cormsg: From DATATAKING: vw% +090000 2010-May-24 19:32:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:48 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-24 19:32:48 LOG4 got_cormsg: From DATATAKING: pnt tr 115900.0 +090000 -CJ 2010-May-24 19:32:48 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-May-24 19:32:48 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-24 19:32:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:32:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-24 19:33:41 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-May-24 19:33:41 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-May-24 19:33:42 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-May-24 19:33:42 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2010-May-24 19:33:42 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-May-24 19:33:42 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-May-24 19:33:42 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2010-May-24 19:33:42 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-May-24 19:33:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-24 19:33:42 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-May-24 19:33:42 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2010-May-24 19:33:42 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2010-May-24 19:33:42 BEGIN begin_task: Starting task 'waiting on telescope' 2010-May-24 19:33:42 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2010-May-24 19:33:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-24 19:33:42 LOG3 waittrk: Start waittrk 5 2010-May-24 19:33:42 START begin_task: Starting task 'waiting on telescope movement' 2010-May-24 19:33:42 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2010-May-24 19:33:47 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-24 19:33:47 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2010-May-24 19:33:47 START begin_task: Starting task 'waiting on telescope on source' 2010-May-24 19:33:47 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-May-24 19:46:00 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-24 19:46:00 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-May-24 19:46:00 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-May-24 19:46:00 INFO2 waittrk: Now tracking galfasrc 2010-May-24 19:46:00 LOG4 waittrk: Current telescope position: Az = 320.24 ZA = 11.99 2010-May-24 19:46:00 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-24 19:46:00 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2010-May-24 19:46:00 DONE finish_task: DONE finished waiting: telescope on source 2010-May-24 19:46:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-24 19:46:00 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-24 19:46:00 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2010-May-24 19:46:00 COMMAND run_command_line: EXECUTING command 20: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2010-May-24 19:46:00 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2010-May-24 19:46:42 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 19:46:42.298 (seconds: 71202.298)!} 2010-May-24 19:46:42 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 19:46:42.298 (seconds: 71202.298)! 2010-May-24 19:47:00 WARNING check_obsmode: WARNING failed to get a response from the CIMA frontend when checking options for 'smart frequency switching'! 2010-May-24 19:47:00 NOTE check_obsmode: Assuming that the options are OK 2010-May-24 19:47:00 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2010-May-24 19:47:00 BEGIN begin_task: Starting task 'smart frequency switching' 2010-May-24 19:47:00 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-May-24 19:47:00 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2010-May-24 19:47:00 INFO1 smartfreq: Starting pattern: Smart frequency switching 2010-May-24 19:47:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2010-May-24 19:47:00 START begin_task: Starting task 'selecting calibration type' 2010-May-24 19:47:00 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2010-May-24 19:47:00 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-24 19:47:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-24 19:47:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 19:47:00 START begin_task: Starting task 'waiting on setcal' 2010-May-24 19:47:00 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2010-May-24 19:47:00 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-24 19:47:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 19:47:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:47:01 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 19:47:15 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-24 19:47:15 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2010-May-24 19:47:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-24 19:47:15 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 19:47:15 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-24 19:47:15 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 19:47:15 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2010-May-24 19:47:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:47:16 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-24 19:47:16 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 19:47:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 19:47:16 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2010-May-24 19:47:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 19:47:16 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-24 19:47:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 19:47:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-24 19:47:16 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 19:47:16 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2010-May-24 19:47:16 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 19:47:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 19:47:16 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2010-May-24 19:47:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 19:47:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-24 19:47:16 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-24 19:47:16 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2010-May-24 19:47:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-24 19:47:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-24 19:47:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-24 19:47:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-24 19:47:16 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20100524.a2048.0000.fits' is empty! 2010-May-24 19:47:16 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2010-May-24 19:47:16 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-May-24 19:47:16 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-May-24 19:47:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-24 19:47:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-24 19:47:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 19:47:16 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2010-May-24 19:47:16 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 19:47:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-24 19:47:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 19:47:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 19:47:16 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2010-May-24 19:47:16 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-May-24 19:47:16 START begin_task: Starting task 'adjusting WAPP power' 2010-May-24 19:47:16 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-May-24 19:47:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-May-24 19:47:16 INFO2 adjust_power: Starting to adjust WAPP power 2010-May-24 19:47:16 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-May-24 19:47:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-May-24 19:47:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 19:47:16 START begin_task: Starting task 'waiting on adjpwrif2' 2010-May-24 19:47:16 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2010-May-24 19:47:16 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-May-24 19:47:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 19:47:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-24 19:47:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:47:19 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 19:47:19 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-May-24 19:47:19 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2010-May-24 19:47:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-May-24 19:47:19 START begin_task: Starting task 'adjusting WAPP power' 2010-May-24 19:47:19 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2010-May-24 19:47:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-24 19:47:19 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 19:47:19 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 19:47:20 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 19:47:20 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 19:47:20 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-May-24 19:47:20 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2010-May-24 19:47:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-May-24 19:47:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:47:20 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-May-24 19:47:20 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 5 dB 2010-May-24 19:47:20 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 4 3 dB 2010-May-24 19:47:20 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-May-24 19:47:20 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-May-24 19:47:20 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-May-24 19:47:20 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2010-May-24 19:47:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.948 0.979 ALFA beam 1: 1.061 1.088 2010-May-24 19:47:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.983 0.978 ALFA beam 3: 0.928 1.026 2010-May-24 19:47:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.912 0.922 ALFA beam 5: 0.966 1.030 2010-May-24 19:47:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.936 0.893 ALFA beam 7: 1.027 1.046 2010-May-24 19:47:20 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-24 19:47:20 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2010-May-24 19:47:20 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-May-24 19:47:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 19:47:20 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-24 19:47:20 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2010-May-24 19:47:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-24 19:47:20 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-24 19:47:20 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-May-24 19:47:20 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-May-24 19:47:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 19:47:20 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-24 19:47:20 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-May-24 19:47:20 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2010-May-24 19:47:20 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-May-24 19:47:20 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-May-24 19:47:20 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:47:20 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39651 J 2010-May-24 19:47:20 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:47:20 LOG2 antvel: Parameters to Doppler: Topocentric 85640 2010 144 0.0 2010-May-24 19:47:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:47:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-May-24 19:47:20 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-May-24 19:47:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:47:20 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:47:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-May-24 19:47:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:47:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2010-May-24 19:47:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:47:20 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2010-May-24 19:47:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2010-May-24 19:47:20 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.502831 2010.3965079727229 18.999933 2010-May-24 19:47:20 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333331 9.000000000000004 2010-May-24 19:47:20 LOG4 log_alfabeam: ALFABEAM 1 11.978202079791647 9.074076396041599 2010-May-24 19:47:20 LOG4 log_alfabeam: ALFABEAM 2 11.977247441717321 8.977118470755885 2010-May-24 19:47:20 LOG4 log_alfabeam: ALFABEAM 3 11.982354195402921 8.902668238904672 2010-May-24 19:47:20 LOG4 log_alfabeam: ALFABEAM 4 11.988478049926174 8.926108887101796 2010-May-24 19:47:20 LOG4 log_alfabeam: ALFABEAM 5 11.989422296399020 9.023658624630110 2010-May-24 19:47:20 LOG4 log_alfabeam: ALFABEAM 6 11.984253245950962 9.097173237283453 2010-May-24 19:47:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400086 2010-May-24 19:47:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:47:21 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2010-May-24 19:47:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:47:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-May-24 19:47:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:47:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:47:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:47:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-May-24 19:47:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85642.00 2010-May-24 19:47:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:47:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:47:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:47:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:47:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:47:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:47:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:47:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:47:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:47:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:47:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:47:32 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2010-May-24 19:47:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:47:32 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2010-May-24 19:47:32 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2010-May-24 19:47:32 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-May-24 19:47:32 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-May-24 19:47:32 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:47:32 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39651 J 2010-May-24 19:47:32 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:47:32 LOG2 antvel: Parameters to Doppler: Topocentric 85652 2010 144 0.0 2010-May-24 19:47:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:47:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-May-24 19:47:32 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-May-24 19:47:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:47:32 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:47:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-May-24 19:47:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:47:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2010-May-24 19:47:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:47:32 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2010-May-24 19:47:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2010-May-24 19:47:32 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.506173 2010.3965083529799 18.999933 2010-May-24 19:47:32 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333327 9.000000000000004 2010-May-24 19:47:32 LOG4 log_alfabeam: ALFABEAM 1 11.978218141894372 9.074319757044121 2010-May-24 19:47:32 LOG4 log_alfabeam: ALFABEAM 2 11.977242527695264 8.977408393346625 2010-May-24 19:47:32 LOG4 log_alfabeam: ALFABEAM 3 11.982333087710101 8.902715006754304 2010-May-24 19:47:32 LOG4 log_alfabeam: ALFABEAM 4 11.988462070872872 8.925865399602056 2010-May-24 19:47:32 LOG4 log_alfabeam: ALFABEAM 5 11.989427380475220 9.023370598742108 2010-May-24 19:47:32 LOG4 log_alfabeam: ALFABEAM 6 11.984274177867306 9.097128883200901 2010-May-24 19:47:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400087 2010-May-24 19:47:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:47:33 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2010-May-24 19:47:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:47:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-May-24 19:47:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:47:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:47:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:47:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-May-24 19:47:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85654.00 2010-May-24 19:47:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:47:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:47:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:47:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:47:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:47:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:47:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:47:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:47:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:47:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:47:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:47:44 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2010-May-24 19:47:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:47:44 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2010-May-24 19:47:44 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2010-May-24 19:47:44 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-May-24 19:47:44 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-May-24 19:47:44 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:47:44 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39651 J 2010-May-24 19:47:44 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:47:44 LOG2 antvel: Parameters to Doppler: Topocentric 85664 2010 144 0.0 2010-May-24 19:47:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:47:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-May-24 19:47:44 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-May-24 19:47:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:47:44 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:47:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-May-24 19:47:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:47:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2010-May-24 19:47:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:47:44 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-May-24 19:47:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2010-May-24 19:47:44 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.509515 2010.3965087332369 18.999933 2010-May-24 19:47:44 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333329 9.000000000000002 2010-May-24 19:47:44 LOG4 log_alfabeam: ALFABEAM 1 11.978234339202773 9.074563593212099 2010-May-24 19:47:44 LOG4 log_alfabeam: ALFABEAM 2 11.977237651880667 8.977700029617781 2010-May-24 19:47:44 LOG4 log_alfabeam: ALFABEAM 3 11.982311882496241 8.902763027775606 2010-May-24 19:47:44 LOG4 log_alfabeam: ALFABEAM 4 11.988445957003121 8.925621428041566 2010-May-24 19:47:44 LOG4 log_alfabeam: ALFABEAM 5 11.989432428017967 9.023080850986469 2010-May-24 19:47:44 LOG4 log_alfabeam: ALFABEAM 6 11.984295207536197 9.097083305821844 2010-May-24 19:47:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400088 2010-May-24 19:47:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:47:45 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2010-May-24 19:47:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:47:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-May-24 19:47:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:47:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:47:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:47:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-May-24 19:47:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85666.00 2010-May-24 19:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:47:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:47:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:47:56 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2010-May-24 19:47:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:47:56 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-May-24 19:47:56 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2010-May-24 19:47:56 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-May-24 19:47:56 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-May-24 19:47:56 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:47:56 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39651 J 2010-May-24 19:47:56 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:47:56 LOG2 antvel: Parameters to Doppler: Topocentric 85676 2010 144 0.0 2010-May-24 19:47:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:47:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-May-24 19:47:56 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-May-24 19:47:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:47:56 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:47:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-May-24 19:47:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:47:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2010-May-24 19:47:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:47:56 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2010-May-24 19:47:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2010-May-24 19:47:56 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.512858 2010.3965091134942 18.999933 2010-May-24 19:47:56 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333333 9.000000000000004 2010-May-24 19:47:56 LOG4 log_alfabeam: ALFABEAM 1 11.978250677516266 9.074807967087873 2010-May-24 19:47:56 LOG4 log_alfabeam: ALFABEAM 2 11.977232813777919 8.977993472538506 2010-May-24 19:47:56 LOG4 log_alfabeam: ALFABEAM 3 11.982290573432401 8.902812332661577 2010-May-24 19:47:56 LOG4 log_alfabeam: ALFABEAM 4 11.988429702539822 8.925376909715887 2010-May-24 19:47:56 LOG4 log_alfabeam: ALFABEAM 5 11.989437439582085 9.022789288640553 2010-May-24 19:47:56 LOG4 log_alfabeam: ALFABEAM 6 11.984316341255598 9.097036475388009 2010-May-24 19:47:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400089 2010-May-24 19:47:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:47:57 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2010-May-24 19:47:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:47:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-May-24 19:47:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:47:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:47:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:47:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-May-24 19:47:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85678.00 2010-May-24 19:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:48:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:48:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:48:08 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2010-May-24 19:48:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:48:08 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2010-May-24 19:48:08 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2010-May-24 19:48:08 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-May-24 19:48:08 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-May-24 19:48:08 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:48:08 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39651 J 2010-May-24 19:48:08 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:48:08 LOG2 antvel: Parameters to Doppler: Topocentric 85688 2010 144 0.0 2010-May-24 19:48:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:48:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-May-24 19:48:08 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-May-24 19:48:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:48:08 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:48:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-May-24 19:48:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:48:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2010-May-24 19:48:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:48:08 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-May-24 19:48:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2010-May-24 19:48:08 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.516200 2010.3965094937512 18.999933 2010-May-24 19:48:08 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333329 9.000000000000002 2010-May-24 19:48:08 LOG4 log_alfabeam: ALFABEAM 1 11.978267147948882 9.075052721591723 2010-May-24 19:48:08 LOG4 log_alfabeam: ALFABEAM 2 11.977228017238463 8.978288551334847 2010-May-24 19:48:08 LOG4 log_alfabeam: ALFABEAM 3 11.982269173341521 8.902862907771141 2010-May-24 19:48:08 LOG4 log_alfabeam: ALFABEAM 4 11.988413316315922 8.925132001673337 2010-May-24 19:48:08 LOG4 log_alfabeam: ALFABEAM 5 11.989442411219201 9.022496081033875 2010-May-24 19:48:08 LOG4 log_alfabeam: ALFABEAM 6 11.984337566329300 9.096988404247710 2010-May-24 19:48:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400090 2010-May-24 19:48:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:48:09 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2010-May-24 19:48:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-May-24 19:48:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:48:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:48:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:48:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:48:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-May-24 19:48:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85690.00 2010-May-24 19:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:48:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:48:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:48:20 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2010-May-24 19:48:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:48:20 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-May-24 19:48:20 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2010-May-24 19:48:20 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-May-24 19:48:20 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-May-24 19:48:20 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:48:20 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39651 J 2010-May-24 19:48:20 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:48:20 LOG2 antvel: Parameters to Doppler: Topocentric 85700 2010 144 0.0 2010-May-24 19:48:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:48:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-May-24 19:48:20 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-May-24 19:48:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:48:20 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:48:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-May-24 19:48:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:48:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2010-May-24 19:48:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:48:20 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2010-May-24 19:48:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2010-May-24 19:48:20 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.519543 2010.3965098740082 18.999933 2010-May-24 19:48:20 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333327 8.999999999999995 2010-May-24 19:48:20 LOG4 log_alfabeam: ALFABEAM 1 11.978283761242702 9.075297992058447 2010-May-24 19:48:20 LOG4 log_alfabeam: ALFABEAM 2 11.977223260360317 8.978585447223079 2010-May-24 19:48:20 LOG4 log_alfabeam: ALFABEAM 3 11.982247669506233 8.902914799330889 2010-May-24 19:48:20 LOG4 log_alfabeam: ALFABEAM 4 11.988396787636674 8.924886568368734 2010-May-24 19:48:20 LOG4 log_alfabeam: ALFABEAM 5 11.989447344942725 9.022201047745977 2010-May-24 19:48:20 LOG4 log_alfabeam: ALFABEAM 6 11.984358895392166 9.096939047857983 2010-May-24 19:48:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400091 2010-May-24 19:48:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:48:21 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2010-May-24 19:48:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:48:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-May-24 19:48:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:48:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:48:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:48:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-May-24 19:48:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85702.00 2010-May-24 19:48:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:48:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:48:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:48:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:48:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:48:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:48:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:48:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:48:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:48:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:48:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:48:32 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2010-May-24 19:48:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:48:32 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2010-May-24 19:48:32 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2010-May-24 19:48:32 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-May-24 19:48:32 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-May-24 19:48:32 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:48:32 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39651 J 2010-May-24 19:48:32 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:48:32 LOG2 antvel: Parameters to Doppler: Topocentric 85712 2010 144 0.0 2010-May-24 19:48:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:48:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-May-24 19:48:32 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-May-24 19:48:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:48:32 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:48:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-May-24 19:48:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:48:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2010-May-24 19:48:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:48:32 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2010-May-24 19:48:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2010-May-24 19:48:32 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.522885 2010.3965102542652 18.999933 2010-May-24 19:48:32 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333327 9.000000000000000 2010-May-24 19:48:32 LOG4 log_alfabeam: ALFABEAM 1 11.978300508339808 9.075543620363074 2010-May-24 19:48:32 LOG4 log_alfabeam: ALFABEAM 2 11.977218546968514 8.978883987046022 2010-May-24 19:48:32 LOG4 log_alfabeam: ALFABEAM 3 11.982226074896035 8.902967992345115 2010-May-24 19:48:32 LOG4 log_alfabeam: ALFABEAM 4 11.988380125506195 8.924640767905787 2010-May-24 19:48:32 LOG4 log_alfabeam: ALFABEAM 5 11.989452236828241 9.021904360491328 2010-May-24 19:48:32 LOG4 log_alfabeam: ALFABEAM 6 11.984380315601841 9.096888419880228 2010-May-24 19:48:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400092 2010-May-24 19:48:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:48:33 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2010-May-24 19:48:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:48:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-May-24 19:48:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:48:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:48:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:48:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-May-24 19:48:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85714.00 2010-May-24 19:48:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:48:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:48:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:48:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:48:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:48:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:48:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:48:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:48:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:48:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:48:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:48:44 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2010-May-24 19:48:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:48:44 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2010-May-24 19:48:44 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-May-24 19:48:44 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-24 19:48:44 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-24 19:48:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 19:48:44 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-May-24 19:48:44 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 19:48:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-24 19:48:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 19:48:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 19:48:44 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-May-24 19:48:44 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2010-May-24 19:48:44 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-May-24 19:48:44 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-May-24 19:48:44 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:48:44 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39651 J 2010-May-24 19:48:44 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:48:44 LOG2 antvel: Parameters to Doppler: Topocentric 85724 2010 144 0.0 2010-May-24 19:48:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:48:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-May-24 19:48:44 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-May-24 19:48:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:48:44 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:48:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-May-24 19:48:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:48:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2010-May-24 19:48:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:48:44 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2010-May-24 19:48:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2010-May-24 19:48:44 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.526228 2010.3965106345222 18.999933 2010-May-24 19:48:44 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333327 8.999999999999998 2010-May-24 19:48:44 LOG4 log_alfabeam: ALFABEAM 1 11.978317400139797 9.075789741849308 2010-May-24 19:48:44 LOG4 log_alfabeam: ALFABEAM 2 11.977213875232964 8.979184353764278 2010-May-24 19:48:44 LOG4 log_alfabeam: ALFABEAM 3 11.982204376707822 8.903022534795502 2010-May-24 19:48:44 LOG4 log_alfabeam: ALFABEAM 4 11.988363319072436 8.924394464718466 2010-May-24 19:48:44 LOG4 log_alfabeam: ALFABEAM 5 11.989457088818835 9.021605837084879 2010-May-24 19:48:44 LOG4 log_alfabeam: ALFABEAM 6 11.984401839680057 9.096836474047350 2010-May-24 19:48:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400093 2010-May-24 19:48:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:48:45 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2010-May-24 19:48:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:48:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-May-24 19:48:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:48:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:48:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:48:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-May-24 19:48:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85726.00 2010-May-24 19:48:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:48:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:48:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:48:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:48:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:48:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:48:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:48:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:48:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:48:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:48:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:48:56 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2010-May-24 19:48:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:48:56 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2010-May-24 19:48:56 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2010-May-24 19:48:56 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-May-24 19:48:56 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-May-24 19:48:56 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:48:56 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39651 J 2010-May-24 19:48:56 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:48:56 LOG2 antvel: Parameters to Doppler: Topocentric 85736 2010 144 0.0 2010-May-24 19:48:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:48:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-May-24 19:48:56 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-May-24 19:48:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:48:56 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:48:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-May-24 19:48:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:48:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2010-May-24 19:48:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:48:56 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2010-May-24 19:48:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2010-May-24 19:48:56 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.529570 2010.3965110147794 18.999933 2010-May-24 19:48:56 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333327 9.000000000000002 2010-May-24 19:48:56 LOG4 log_alfabeam: ALFABEAM 1 11.978334427409417 9.076036197364241 2010-May-24 19:48:56 LOG4 log_alfabeam: ALFABEAM 2 11.977209248949848 8.979486371807964 2010-May-24 19:48:56 LOG4 log_alfabeam: ALFABEAM 3 11.982182588058627 8.903078410284122 2010-May-24 19:48:56 LOG4 log_alfabeam: ALFABEAM 4 11.988346377514079 8.924147817948885 2010-May-24 19:48:56 LOG4 log_alfabeam: ALFABEAM 5 11.989461897016460 9.021305651656231 2010-May-24 19:48:56 LOG4 log_alfabeam: ALFABEAM 6 11.984423454637289 9.096783225380348 2010-May-24 19:48:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400094 2010-May-24 19:48:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:48:57 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2010-May-24 19:48:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:48:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-May-24 19:48:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:48:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:48:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:48:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-May-24 19:48:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85738.00 2010-May-24 19:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:49:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:49:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:49:08 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2010-May-24 19:49:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:49:08 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2010-May-24 19:49:08 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2010-May-24 19:49:08 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-May-24 19:49:08 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-May-24 19:49:08 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:49:08 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39651 J 2010-May-24 19:49:08 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:49:08 LOG2 antvel: Parameters to Doppler: Topocentric 85748 2010 144 0.0 2010-May-24 19:49:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:49:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-May-24 19:49:08 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-May-24 19:49:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:49:08 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:49:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-May-24 19:49:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:49:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2010-May-24 19:49:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:49:08 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2010-May-24 19:49:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2010-May-24 19:49:08 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.532913 2010.3965113950364 18.999933 2010-May-24 19:49:08 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333324 9.000000000000007 2010-May-24 19:49:08 LOG4 log_alfabeam: ALFABEAM 1 11.978351601206555 9.076283122222895 2010-May-24 19:49:08 LOG4 log_alfabeam: ALFABEAM 2 11.977204666363223 8.979790225873291 2010-May-24 19:49:08 LOG4 log_alfabeam: ALFABEAM 3 11.982160696061095 8.903135668576949 2010-May-24 19:49:08 LOG4 log_alfabeam: ALFABEAM 4 11.988329289820934 8.923900692047715 2010-May-24 19:49:08 LOG4 log_alfabeam: ALFABEAM 5 11.989466663291624 9.021003620263762 2010-May-24 19:49:08 LOG4 log_alfabeam: ALFABEAM 6 11.984445173280713 9.096728625858788 2010-May-24 19:49:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400095 2010-May-24 19:49:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:49:09 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2010-May-24 19:49:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:49:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-May-24 19:49:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:49:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:49:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:49:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-May-24 19:49:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85750.00 2010-May-24 19:49:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:49:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:49:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:49:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:49:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:49:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:49:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:49:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:49:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:49:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:49:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:49:20 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2010-May-24 19:49:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:49:20 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2010-May-24 19:49:20 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2010-May-24 19:49:20 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-May-24 19:49:20 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-May-24 19:49:20 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:49:20 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39651 J 2010-May-24 19:49:20 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:49:20 LOG2 antvel: Parameters to Doppler: Topocentric 85760 2010 144 0.0 2010-May-24 19:49:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:49:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-May-24 19:49:20 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-May-24 19:49:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:49:20 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:49:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-May-24 19:49:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:49:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2010-May-24 19:49:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:49:20 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2010-May-24 19:49:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2010-May-24 19:49:20 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.536255 2010.3965117752934 18.999933 2010-May-24 19:49:20 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333327 8.999999999999993 2010-May-24 19:49:20 LOG4 log_alfabeam: ALFABEAM 1 11.978368912119199 9.076530356263399 2010-May-24 19:49:20 LOG4 log_alfabeam: ALFABEAM 2 11.977200131237852 8.980095737948522 2010-May-24 19:49:20 LOG4 log_alfabeam: ALFABEAM 3 11.982138713980683 8.903194291825059 2010-May-24 19:49:20 LOG4 log_alfabeam: ALFABEAM 4 11.988312065349721 8.923653247176887 2010-May-24 19:49:20 LOG4 log_alfabeam: ALFABEAM 5 11.989471383775092 9.020699919482166 2010-May-24 19:49:20 LOG4 log_alfabeam: ALFABEAM 6 11.984466982472707 9.096672691911072 2010-May-24 19:49:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400096 2010-May-24 19:49:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:49:21 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2010-May-24 19:49:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:49:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-May-24 19:49:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:49:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:49:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:49:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-May-24 19:49:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85762.00 2010-May-24 19:49:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:49:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:49:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:49:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:49:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:49:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:49:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:49:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:49:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:49:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:49:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:49:32 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2010-May-24 19:49:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:49:32 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2010-May-24 19:49:32 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2010-May-24 19:49:32 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-May-24 19:49:32 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-May-24 19:49:32 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:49:32 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39651 J 2010-May-24 19:49:32 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:49:32 LOG2 antvel: Parameters to Doppler: Topocentric 85772 2010 144 0.0 2010-May-24 19:49:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:49:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-May-24 19:49:32 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-May-24 19:49:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:49:32 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:49:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-May-24 19:49:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:49:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2010-May-24 19:49:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:49:32 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2010-May-24 19:49:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2010-May-24 19:49:32 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.539598 2010.3965121555505 18.999933 2010-May-24 19:49:32 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333329 8.999999999999996 2010-May-24 19:49:32 LOG4 log_alfabeam: ALFABEAM 1 11.978386371364241 9.076778034733570 2010-May-24 19:49:32 LOG4 log_alfabeam: ALFABEAM 2 11.977195641894188 8.980403094455525 2010-May-24 19:49:32 LOG4 log_alfabeam: ALFABEAM 3 11.982116628847384 8.903254331607442 2010-May-24 19:49:32 LOG4 log_alfabeam: ALFABEAM 4 11.988294692931371 8.923405347842069 2010-May-24 19:49:32 LOG4 log_alfabeam: ALFABEAM 5 11.989476060262524 9.020394363622504 2010-May-24 19:49:32 LOG4 log_alfabeam: ALFABEAM 6 11.984488895104349 9.096615373734613 2010-May-24 19:49:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400097 2010-May-24 19:49:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:49:33 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2010-May-24 19:49:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:49:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-May-24 19:49:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:49:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:49:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:49:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-May-24 19:49:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85774.00 2010-May-24 19:49:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:49:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:49:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:49:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:49:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:49:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:49:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:49:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:49:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:49:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:49:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:49:44 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2010-May-24 19:49:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:49:44 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2010-May-24 19:49:44 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2010-May-24 19:49:44 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-May-24 19:49:44 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-May-24 19:49:44 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:49:44 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39651 J 2010-May-24 19:49:44 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:49:44 LOG2 antvel: Parameters to Doppler: Topocentric 85784 2010 144 0.0 2010-May-24 19:49:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:49:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-May-24 19:49:44 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-May-24 19:49:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:49:44 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:49:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-May-24 19:49:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:49:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2010-May-24 19:49:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:49:44 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-May-24 19:49:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2010-May-24 19:49:44 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.542940 2010.3965125358077 18.999933 2010-May-24 19:49:44 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333336 9.000000000000000 2010-May-24 19:49:44 LOG4 log_alfabeam: ALFABEAM 1 11.978403969347438 9.077025996483330 2010-May-24 19:49:44 LOG4 log_alfabeam: ALFABEAM 2 11.977191202062974 8.980712114912002 2010-May-24 19:49:44 LOG4 log_alfabeam: ALFABEAM 3 11.982094454075899 8.903315768574089 2010-May-24 19:49:44 LOG4 log_alfabeam: ALFABEAM 4 11.988277182104117 8.923157155204891 2010-May-24 19:49:44 LOG4 log_alfabeam: ALFABEAM 5 11.989480688916146 9.020087131734199 2010-May-24 19:49:44 LOG4 log_alfabeam: ALFABEAM 6 11.984510897889045 9.096556689214378 2010-May-24 19:49:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400098 2010-May-24 19:49:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:49:45 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2010-May-24 19:49:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:49:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-May-24 19:49:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:49:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:49:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:49:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-May-24 19:49:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85786.00 2010-May-24 19:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:49:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:49:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:49:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:49:56 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2010-May-24 19:49:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:49:56 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-May-24 19:49:56 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2010-May-24 19:49:56 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-May-24 19:49:56 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-May-24 19:49:56 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:49:56 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39651 J 2010-May-24 19:49:56 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:49:56 LOG2 antvel: Parameters to Doppler: Topocentric 85796 2010 144 0.0 2010-May-24 19:49:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:49:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-May-24 19:49:56 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-May-24 19:49:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:49:56 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:49:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-May-24 19:49:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:49:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2010-May-24 19:49:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:49:56 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-May-24 19:49:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2010-May-24 19:49:56 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.546282 2010.3965129160647 18.999933 2010-May-24 19:49:56 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333331 9.000000000000000 2010-May-24 19:49:56 LOG4 log_alfabeam: ALFABEAM 1 11.978421712114486 9.077274302305200 2010-May-24 19:49:56 LOG4 log_alfabeam: ALFABEAM 2 11.977186811449615 8.981022894198508 2010-May-24 19:49:56 LOG4 log_alfabeam: ALFABEAM 3 11.982072183293464 8.903378637117555 2010-May-24 19:49:56 LOG4 log_alfabeam: ALFABEAM 4 11.988259526843905 8.922908608287431 2010-May-24 19:49:56 LOG4 log_alfabeam: ALFABEAM 5 11.989485270090865 9.019778129117114 2010-May-24 19:49:56 LOG4 log_alfabeam: ALFABEAM 6 11.984532997173146 9.096496604926774 2010-May-24 19:49:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400099 2010-May-24 19:49:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:49:57 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-May-24 19:49:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:49:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-May-24 19:49:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:49:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:49:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:49:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-May-24 19:49:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85798.00 2010-May-24 19:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:49:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:50:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:50:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:50:08 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-May-24 19:50:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:50:08 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-May-24 19:50:08 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2010-May-24 19:50:08 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-May-24 19:50:08 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-May-24 19:50:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-24 19:50:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-24 19:50:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 19:50:08 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-May-24 19:50:08 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 19:50:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-24 19:50:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 19:50:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 19:50:08 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-May-24 19:50:08 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-May-24 19:50:08 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2010-May-24 19:50:08 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-May-24 19:50:08 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-May-24 19:50:08 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:50:08 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39651 J 2010-May-24 19:50:08 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:50:08 LOG2 antvel: Parameters to Doppler: Topocentric 85808 2010 144 0.0 2010-May-24 19:50:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:50:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-May-24 19:50:08 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-May-24 19:50:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:50:08 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:50:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-May-24 19:50:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:50:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2010-May-24 19:50:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:50:08 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2010-May-24 19:50:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2010-May-24 19:50:08 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.549625 2010.3965132963217 18.999933 2010-May-24 19:50:08 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333340 9.000000000000004 2010-May-24 19:50:08 LOG4 log_alfabeam: ALFABEAM 1 11.978439605877792 9.077523013129483 2010-May-24 19:50:08 LOG4 log_alfabeam: ALFABEAM 2 11.977182469829183 8.981335529100688 2010-May-24 19:50:08 LOG4 log_alfabeam: ALFABEAM 3 11.982049810030045 8.903442973418125 2010-May-24 19:50:08 LOG4 log_alfabeam: ALFABEAM 4 11.988241720960337 8.922659645961827 2010-May-24 19:50:08 LOG4 log_alfabeam: ALFABEAM 5 11.989489804073781 9.019467259147405 2010-May-24 19:50:08 LOG4 log_alfabeam: ALFABEAM 6 11.984555199401322 9.096435085694763 2010-May-24 19:50:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400100 2010-May-24 19:50:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:50:09 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2010-May-24 19:50:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-May-24 19:50:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:50:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:50:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:50:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:50:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-May-24 19:50:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85810.00 2010-May-24 19:50:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:50:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:50:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:50:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:50:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:50:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:50:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:50:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:50:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:50:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:50:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:50:20 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2010-May-24 19:50:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:50:20 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2010-May-24 19:50:20 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2010-May-24 19:50:20 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-May-24 19:50:20 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-May-24 19:50:20 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:50:20 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39651 J 2010-May-24 19:50:20 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:50:20 LOG2 antvel: Parameters to Doppler: Topocentric 85820 2010 144 0.0 2010-May-24 19:50:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:50:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-May-24 19:50:20 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-May-24 19:50:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:50:20 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:50:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-May-24 19:50:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:50:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2010-May-24 19:50:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:50:20 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2010-May-24 19:50:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2010-May-24 19:50:20 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.552967 2010.3965136765787 18.999933 2010-May-24 19:50:20 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333333 9.000000000000000 2010-May-24 19:50:20 LOG4 log_alfabeam: ALFABEAM 1 11.978457640763194 9.077771966366381 2010-May-24 19:50:20 LOG4 log_alfabeam: ALFABEAM 2 11.977178180876148 8.981649835377935 2010-May-24 19:50:20 LOG4 log_alfabeam: ALFABEAM 3 11.982027347925573 8.903508755777592 2010-May-24 19:50:20 LOG4 log_alfabeam: ALFABEAM 4 11.988223774270406 8.922410430847323 2010-May-24 19:50:20 LOG4 log_alfabeam: ALFABEAM 5 11.989494287079344 9.019154704640879 2010-May-24 19:50:20 LOG4 log_alfabeam: ALFABEAM 6 11.984577491062007 9.096372151682978 2010-May-24 19:50:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400101 2010-May-24 19:50:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:50:21 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2010-May-24 19:50:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:50:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-May-24 19:50:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:50:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:50:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:50:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-May-24 19:50:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85822.00 2010-May-24 19:50:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:50:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:50:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:50:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:50:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:50:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:50:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:50:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:50:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:50:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:50:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:50:32 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2010-May-24 19:50:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:50:32 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2010-May-24 19:50:32 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2010-May-24 19:50:32 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-May-24 19:50:32 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-May-24 19:50:32 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:50:32 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39651 J 2010-May-24 19:50:32 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:50:32 LOG2 antvel: Parameters to Doppler: Topocentric 85832 2010 144 0.0 2010-May-24 19:50:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:50:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-May-24 19:50:32 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-May-24 19:50:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:50:32 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:50:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-May-24 19:50:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:50:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2010-May-24 19:50:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:50:32 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2010-May-24 19:50:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2010-May-24 19:50:32 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.556310 2010.3965140568357 18.999933 2010-May-24 19:50:32 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333327 9.000000000000004 2010-May-24 19:50:32 LOG4 log_alfabeam: ALFABEAM 1 11.978475828387577 9.078021296922063 2010-May-24 19:50:32 LOG4 log_alfabeam: ALFABEAM 2 11.977173943111868 8.981966003713531 2010-May-24 19:50:32 LOG4 log_alfabeam: ALFABEAM 3 11.982004783810897 8.903576040429424 2010-May-24 19:50:32 LOG4 log_alfabeam: ALFABEAM 4 11.988205675205300 8.922160827759930 2010-May-24 19:50:32 LOG4 log_alfabeam: ALFABEAM 5 11.989498720706072 9.018840275589213 2010-May-24 19:50:32 LOG4 log_alfabeam: ALFABEAM 6 11.984599885248814 9.096307748510295 2010-May-24 19:50:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400102 2010-May-24 19:50:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:50:33 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2010-May-24 19:50:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:50:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-May-24 19:50:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:50:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:50:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:50:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-May-24 19:50:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85834.00 2010-May-24 19:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:50:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:50:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:50:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:50:44 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2010-May-24 19:50:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:50:44 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2010-May-24 19:50:44 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2010-May-24 19:50:44 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-May-24 19:50:44 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-May-24 19:50:44 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:50:44 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39651 J 2010-May-24 19:50:44 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:50:44 LOG2 antvel: Parameters to Doppler: Topocentric 85844 2010 144 0.0 2010-May-24 19:50:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:50:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-May-24 19:50:44 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-May-24 19:50:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:50:44 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:50:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-May-24 19:50:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:50:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2010-May-24 19:50:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:50:44 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2010-May-24 19:50:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2010-May-24 19:50:44 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.559652 2010.3965144370929 18.999933 2010-May-24 19:50:44 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333327 8.999999999999995 2010-May-24 19:50:44 LOG4 log_alfabeam: ALFABEAM 1 11.978494158685802 9.078270841277998 2010-May-24 19:50:44 LOG4 log_alfabeam: ALFABEAM 2 11.977169760169751 8.982283847326862 2010-May-24 19:50:44 LOG4 log_alfabeam: ALFABEAM 3 11.981982131476938 8.903644804043450 2010-May-24 19:50:44 LOG4 log_alfabeam: ALFABEAM 4 11.988187433772319 8.921911000260133 2010-May-24 19:50:44 LOG4 log_alfabeam: ALFABEAM 5 11.989503101206827 9.018524157354816 2010-May-24 19:50:44 LOG4 log_alfabeam: ALFABEAM 6 11.984622368299362 9.096241897926326 2010-May-24 19:50:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400103 2010-May-24 19:50:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:50:45 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2010-May-24 19:50:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:50:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-May-24 19:50:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:50:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:50:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:50:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-May-24 19:50:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85846.00 2010-May-24 19:50:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:50:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:50:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:50:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:50:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:50:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:50:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:50:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:50:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:50:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:50:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:50:56 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2010-May-24 19:50:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:50:56 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2010-May-24 19:50:56 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2010-May-24 19:50:56 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-May-24 19:50:56 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-May-24 19:50:56 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:50:56 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39651 J 2010-May-24 19:50:56 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:50:56 LOG2 antvel: Parameters to Doppler: Topocentric 85856 2010 144 0.0 2010-May-24 19:50:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:50:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-May-24 19:50:56 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-May-24 19:50:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:50:56 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:50:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-May-24 19:50:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:50:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2010-May-24 19:50:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:50:56 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2010-May-24 19:50:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2010-May-24 19:50:56 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.562995 2010.39651481735 18.999933 2010-May-24 19:50:56 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333329 8.999999999999995 2010-May-24 19:50:56 LOG4 log_alfabeam: ALFABEAM 1 11.978512643435515 9.078520734132299 2010-May-24 19:50:56 LOG4 log_alfabeam: ALFABEAM 2 11.977165630655451 8.982603558581408 2010-May-24 19:50:56 LOG4 log_alfabeam: ALFABEAM 3 11.981959377678107 8.903715104762336 2010-May-24 19:50:56 LOG4 log_alfabeam: ALFABEAM 4 11.988169038241914 8.921660813359393 2010-May-24 19:50:56 LOG4 log_alfabeam: ALFABEAM 5 11.989507430097248 9.018206158224666 2010-May-24 19:50:56 LOG4 log_alfabeam: ALFABEAM 6 11.984644953385157 9.096174543670777 2010-May-24 19:50:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400104 2010-May-24 19:50:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:50:57 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2010-May-24 19:50:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:50:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-May-24 19:50:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:50:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:50:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:50:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-May-24 19:50:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85858.00 2010-May-24 19:50:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:50:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:50:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:50:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:50:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:50:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:50:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:50:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:50:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:51:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:51:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:51:08 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2010-May-24 19:51:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:51:08 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2010-May-24 19:51:08 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2010-May-24 19:51:08 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-May-24 19:51:08 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-May-24 19:51:08 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:51:08 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39652 J 2010-May-24 19:51:08 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:51:08 LOG2 antvel: Parameters to Doppler: Topocentric 85868 2010 144 0.0 2010-May-24 19:51:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:51:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-May-24 19:51:08 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-May-24 19:51:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:51:08 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:51:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-May-24 19:51:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:51:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2010-May-24 19:51:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:51:08 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-May-24 19:51:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2010-May-24 19:51:08 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.566337 2010.396515197607 18.999933 2010-May-24 19:51:08 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333327 9.000000000000000 2010-May-24 19:51:08 LOG4 log_alfabeam: ALFABEAM 1 11.978531272376996 9.078770811064897 2010-May-24 19:51:08 LOG4 log_alfabeam: ALFABEAM 2 11.977161558158258 8.982924948129911 2010-May-24 19:51:08 LOG4 log_alfabeam: ALFABEAM 3 11.981936536356828 8.903786917569388 2010-May-24 19:51:08 LOG4 log_alfabeam: ALFABEAM 4 11.988150498815239 8.921410431532745 2010-May-24 19:51:08 LOG4 log_alfabeam: ALFABEAM 5 11.989511703671527 9.017886466135515 2010-May-24 19:51:08 LOG4 log_alfabeam: ALFABEAM 6 11.984667626692335 9.096105709131903 2010-May-24 19:51:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400105 2010-May-24 19:51:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:51:09 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-May-24 19:51:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:51:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-May-24 19:51:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:51:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:51:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:51:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-May-24 19:51:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85870.00 2010-May-24 19:51:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:51:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:51:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:51:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:51:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:51:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:51:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:51:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:51:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:51:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:51:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:51:20 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-May-24 19:51:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:51:20 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-May-24 19:51:20 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2010-May-24 19:51:20 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-May-24 19:51:20 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-May-24 19:51:20 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:51:20 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39652 J 2010-May-24 19:51:20 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:51:20 LOG2 antvel: Parameters to Doppler: Topocentric 85880 2010 144 0.0 2010-May-24 19:51:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:51:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-May-24 19:51:20 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-May-24 19:51:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:51:20 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:51:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-May-24 19:51:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:51:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2010-May-24 19:51:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:51:20 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-May-24 19:51:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2010-May-24 19:51:20 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.569680 2010.396515577864 18.999933 2010-May-24 19:51:20 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333329 9.000000000000000 2010-May-24 19:51:20 LOG4 log_alfabeam: ALFABEAM 1 11.978550057448967 9.079021206523866 2010-May-24 19:51:20 LOG4 log_alfabeam: ALFABEAM 2 11.977157541370381 8.983248209999999 2010-May-24 19:51:20 LOG4 log_alfabeam: ALFABEAM 3 11.981913594193072 8.903860302542451 2010-May-24 19:51:20 LOG4 log_alfabeam: ALFABEAM 4 11.988131803601718 8.921159720028786 2010-May-24 19:51:20 LOG4 log_alfabeam: ALFABEAM 5 11.989515923360216 9.017564887684854 2010-May-24 19:51:20 LOG4 log_alfabeam: ALFABEAM 6 11.984690401468399 9.096035336143807 2010-May-24 19:51:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400106 2010-May-24 19:51:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:51:21 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-May-24 19:51:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:51:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-May-24 19:51:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:51:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:51:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:51:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-May-24 19:51:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85882.00 2010-May-24 19:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:51:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:51:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:51:32 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-May-24 19:51:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:51:32 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-May-24 19:51:32 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-May-24 19:51:32 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-24 19:51:32 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-24 19:51:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 19:51:32 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-May-24 19:51:32 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 19:51:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-24 19:51:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 19:51:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 19:51:32 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-May-24 19:51:32 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2010-May-24 19:51:32 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-May-24 19:51:32 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-May-24 19:51:32 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:51:32 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39652 J 2010-May-24 19:51:32 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:51:32 LOG2 antvel: Parameters to Doppler: Topocentric 85892 2010 144 0.0 2010-May-24 19:51:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:51:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-May-24 19:51:32 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-May-24 19:51:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:51:32 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:51:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-May-24 19:51:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:51:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2010-May-24 19:51:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:51:32 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2010-May-24 19:51:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2010-May-24 19:51:32 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.573022 2010.396515958121 18.999933 2010-May-24 19:51:32 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333322 9.000000000000005 2010-May-24 19:51:32 LOG4 log_alfabeam: ALFABEAM 1 11.978568988193549 9.079271755216828 2010-May-24 19:51:32 LOG4 log_alfabeam: ALFABEAM 2 11.977153583833893 8.983573152251818 2010-May-24 19:51:32 LOG4 log_alfabeam: ALFABEAM 3 11.981890565281191 8.903935232922427 2010-May-24 19:51:32 LOG4 log_alfabeam: ALFABEAM 4 11.988112962999891 8.920908844208387 2010-May-24 19:51:32 LOG4 log_alfabeam: ALFABEAM 5 11.989520085501900 9.017241613410755 2010-May-24 19:51:32 LOG4 log_alfabeam: ALFABEAM 6 11.984713263747507 9.095963449788329 2010-May-24 19:51:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400107 2010-May-24 19:51:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:51:33 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2010-May-24 19:51:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:51:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-May-24 19:51:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:51:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:51:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:51:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-May-24 19:51:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85894.00 2010-May-24 19:51:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:51:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:51:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:51:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:51:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:51:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:51:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:51:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:51:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:51:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:51:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:51:44 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2010-May-24 19:51:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:51:44 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2010-May-24 19:51:44 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2010-May-24 19:51:44 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-May-24 19:51:44 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-May-24 19:51:44 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:51:44 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39652 J 2010-May-24 19:51:44 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:51:44 LOG2 antvel: Parameters to Doppler: Topocentric 85904 2010 144 0.0 2010-May-24 19:51:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:51:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-May-24 19:51:44 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-May-24 19:51:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:51:44 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:51:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-May-24 19:51:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:51:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2010-May-24 19:51:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:51:44 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2010-May-24 19:51:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2010-May-24 19:51:44 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.576365 2010.3965163383782 18.999933 2010-May-24 19:51:44 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333329 8.999999999999998 2010-May-24 19:51:44 LOG4 log_alfabeam: ALFABEAM 1 11.978588076710782 9.079522591299300 2010-May-24 19:51:44 LOG4 log_alfabeam: ALFABEAM 2 11.977149684329794 8.983899970559754 2010-May-24 19:51:44 LOG4 log_alfabeam: ALFABEAM 3 11.981867436228798 8.904011770747704 2010-May-24 19:51:44 LOG4 log_alfabeam: ALFABEAM 4 11.988093964957960 8.920657669599798 2010-May-24 19:51:44 LOG4 log_alfabeam: ALFABEAM 5 11.989524191439759 9.016916448237966 2010-May-24 19:51:44 LOG4 log_alfabeam: ALFABEAM 6 11.984736226851153 9.095889989968363 2010-May-24 19:51:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400108 2010-May-24 19:51:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:51:45 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2010-May-24 19:51:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:51:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-May-24 19:51:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:51:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:51:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:51:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-May-24 19:51:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85906.00 2010-May-24 19:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:51:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:51:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:51:56 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2010-May-24 19:51:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:51:56 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2010-May-24 19:51:56 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2010-May-24 19:51:56 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-May-24 19:51:56 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-May-24 19:51:56 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:51:56 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39652 J 2010-May-24 19:51:56 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:51:56 LOG2 antvel: Parameters to Doppler: Topocentric 85916 2010 144 0.0 2010-May-24 19:51:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:51:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-May-24 19:51:56 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-May-24 19:51:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:51:56 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:51:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-May-24 19:51:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:51:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2010-May-24 19:51:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:51:56 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2010-May-24 19:51:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2010-May-24 19:51:56 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.579707 2010.3965167186352 18.999933 2010-May-24 19:51:56 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333322 9.000000000000002 2010-May-24 19:51:56 LOG4 log_alfabeam: ALFABEAM 1 11.978607312341035 9.079773548637887 2010-May-24 19:51:56 LOG4 log_alfabeam: ALFABEAM 2 11.977145846349677 8.984228470366311 2010-May-24 19:51:56 LOG4 log_alfabeam: ALFABEAM 3 11.981844221282524 8.904089887459488 2010-May-24 19:51:56 LOG4 log_alfabeam: ALFABEAM 4 11.988074820075450 8.920406362418857 2010-May-24 19:51:56 LOG4 log_alfabeam: ALFABEAM 5 11.989528237559977 9.016589585332010 2010-May-24 19:51:56 LOG4 log_alfabeam: ALFABEAM 6 11.984759276661096 9.095814983515533 2010-May-24 19:51:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400109 2010-May-24 19:51:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:51:57 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2010-May-24 19:51:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:51:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-May-24 19:51:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:51:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:51:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:51:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-May-24 19:51:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85918.00 2010-May-24 19:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:51:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:52:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:52:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:52:08 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2010-May-24 19:52:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:52:08 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2010-May-24 19:52:08 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2010-May-24 19:52:08 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-May-24 19:52:08 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-May-24 19:52:08 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:52:08 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39652 J 2010-May-24 19:52:08 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:52:08 LOG2 antvel: Parameters to Doppler: Topocentric 85928 2010 144 0.0 2010-May-24 19:52:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:52:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-May-24 19:52:08 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-May-24 19:52:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:52:08 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:52:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-May-24 19:52:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:52:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2010-May-24 19:52:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:52:08 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2010-May-24 19:52:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2010-May-24 19:52:08 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.583050 2010.3965170988922 18.999933 2010-May-24 19:52:08 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333333 9.000000000000002 2010-May-24 19:52:08 LOG4 log_alfabeam: ALFABEAM 1 11.978626707345716 9.080024761052396 2010-May-24 19:52:08 LOG4 log_alfabeam: ALFABEAM 2 11.977142068765573 8.984558848973872 2010-May-24 19:52:08 LOG4 log_alfabeam: ALFABEAM 3 11.981820906979744 8.904169647081256 2010-May-24 19:52:08 LOG4 log_alfabeam: ALFABEAM 4 11.988055516139200 8.920154788516539 2010-May-24 19:52:08 LOG4 log_alfabeam: ALFABEAM 5 11.989532225116099 9.016260827962933 2010-May-24 19:52:08 LOG4 log_alfabeam: ALFABEAM 6 11.984782426570741 9.095738368376685 2010-May-24 19:52:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400110 2010-May-24 19:52:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:52:09 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2010-May-24 19:52:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-May-24 19:52:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:52:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:52:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:52:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:52:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-May-24 19:52:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85930.00 2010-May-24 19:52:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:52:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:52:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:52:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:52:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:52:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:52:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:52:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:52:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:52:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:52:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:52:20 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2010-May-24 19:52:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:52:20 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2010-May-24 19:52:20 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2010-May-24 19:52:20 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-May-24 19:52:20 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-May-24 19:52:20 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:52:20 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39652 J 2010-May-24 19:52:20 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:52:20 LOG2 antvel: Parameters to Doppler: Topocentric 85940 2010 144 0.0 2010-May-24 19:52:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:52:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-May-24 19:52:20 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-May-24 19:52:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:52:20 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:52:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-May-24 19:52:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:52:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2010-May-24 19:52:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:52:20 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2010-May-24 19:52:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2010-May-24 19:52:20 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.586392 2010.3965174791492 18.999933 2010-May-24 19:52:20 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333327 8.999999999999995 2010-May-24 19:52:20 LOG4 log_alfabeam: ALFABEAM 1 11.978646250859914 9.080276061601905 2010-May-24 19:52:20 LOG4 log_alfabeam: ALFABEAM 2 11.977138355015288 8.984890909183139 2010-May-24 19:52:20 LOG4 log_alfabeam: ALFABEAM 3 11.981797507719614 8.904251019196126 2010-May-24 19:52:20 LOG4 log_alfabeam: ALFABEAM 4 11.988036063953324 8.919903114930683 2010-May-24 19:52:20 LOG4 log_alfabeam: ALFABEAM 5 11.989536150545229 9.015930371949050 2010-May-24 19:52:20 LOG4 log_alfabeam: ALFABEAM 6 11.984805662309137 9.095660173190689 2010-May-24 19:52:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400111 2010-May-24 19:52:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:52:21 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2010-May-24 19:52:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:52:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-May-24 19:52:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:52:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:52:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:52:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-May-24 19:52:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85942.00 2010-May-24 19:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:52:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:52:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:52:32 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2010-May-24 19:52:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:52:32 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2010-May-24 19:52:32 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2010-May-24 19:52:32 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-May-24 19:52:32 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-May-24 19:52:32 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:52:32 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39652 J 2010-May-24 19:52:32 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:52:32 LOG2 antvel: Parameters to Doppler: Topocentric 85952 2010 144 0.0 2010-May-24 19:52:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:52:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-May-24 19:52:32 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-May-24 19:52:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:52:32 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:52:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-May-24 19:52:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:52:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2010-May-24 19:52:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:52:32 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-May-24 19:52:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2010-May-24 19:52:32 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.589734 2010.3965178594062 18.999933 2010-May-24 19:52:32 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333322 8.999999999999998 2010-May-24 19:52:32 LOG4 log_alfabeam: ALFABEAM 1 11.978665949388883 9.080527508468203 2010-May-24 19:52:32 LOG4 log_alfabeam: ALFABEAM 2 11.977134705146435 8.985224749745360 2010-May-24 19:52:32 LOG4 log_alfabeam: ALFABEAM 3 11.981774017014073 8.904334044743939 2010-May-24 19:52:32 LOG4 log_alfabeam: ALFABEAM 4 11.988016457033284 8.919651283254156 2010-May-24 19:52:32 LOG4 log_alfabeam: ALFABEAM 5 11.989540013862452 9.015598118611686 2010-May-24 19:52:32 LOG4 log_alfabeam: ALFABEAM 6 11.984828990345354 9.095580358050899 2010-May-24 19:52:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400112 2010-May-24 19:52:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:52:33 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-May-24 19:52:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:52:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-May-24 19:52:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:52:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:52:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:52:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-May-24 19:52:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85954.00 2010-May-24 19:52:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:52:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:52:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:52:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:52:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:52:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:52:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:52:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:52:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:52:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:52:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:52:44 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-May-24 19:52:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:52:44 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-May-24 19:52:44 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2010-May-24 19:52:44 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-May-24 19:52:44 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-May-24 19:52:44 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:52:44 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39652 J 2010-May-24 19:52:44 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:52:44 LOG2 antvel: Parameters to Doppler: Topocentric 85964 2010 144 0.0 2010-May-24 19:52:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:52:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-May-24 19:52:44 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-May-24 19:52:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:52:44 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:52:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-May-24 19:52:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:52:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2010-May-24 19:52:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-24 19:52:44 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-May-24 19:52:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2010-May-24 19:52:44 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.593077 2010.3965182396635 18.999933 2010-May-24 19:52:44 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333329 9.000000000000004 2010-May-24 19:52:44 LOG4 log_alfabeam: ALFABEAM 1 11.978685809611314 9.080779159714467 2010-May-24 19:52:44 LOG4 log_alfabeam: ALFABEAM 2 11.977131119292300 8.985560471273127 2010-May-24 19:52:44 LOG4 log_alfabeam: ALFABEAM 3 11.981750428287212 8.904418766666884 2010-May-24 19:52:44 LOG4 log_alfabeam: ALFABEAM 4 11.987996688721292 8.919399235184876 2010-May-24 19:52:44 LOG4 log_alfabeam: ALFABEAM 5 11.989543814998955 9.015263967386666 2010-May-24 19:52:44 LOG4 log_alfabeam: ALFABEAM 6 11.984852417237693 9.095498881082371 2010-May-24 19:52:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14400113 2010-May-24 19:52:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-24 19:52:45 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-May-24 19:52:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 19:52:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-May-24 19:52:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:52:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:52:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:52:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-May-24 19:52:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85966.00 2010-May-24 19:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 19:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 19:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 19:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 19:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 19:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 19:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 19:52:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 19:52:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 19:52:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-24 19:52:56 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-May-24 19:52:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-24 19:52:56 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-May-24 19:52:56 INFO2 smartfreq: Switching off CAL 2010-May-24 19:52:56 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-24 19:52:56 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-24 19:52:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 19:52:56 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-May-24 19:52:56 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 19:52:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-24 19:52:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 19:52:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 19:52:56 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-May-24 19:52:56 INFO3 restore_frequencies: Restoring original frequencies 2010-May-24 19:52:56 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-24 19:52:56 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39652 J 2010-May-24 19:52:56 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:52:56 LOG2 antvel: Parameters to Doppler: Topocentric 85976 2010 144 0.0 2010-May-24 19:52:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:52:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2010-May-24 19:52:56 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2010-May-24 19:52:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:52:56 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:52:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-May-24 19:52:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:52:56 STOP finish_task: Finishing task 'smart frequency switching' 2010-May-24 19:52:56 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-May-24 19:52:56 DONE finish_task: DONE finished pattern: smart frequency switching 2010-May-24 19:52:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-24 19:52:56 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2010-May-24 19:52:56 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-May-24 19:52:56 COMMAND run_command_line: EXECUTING command 27: 'LOAD ages_mock.conf' 2010-May-24 19:52:57 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-May-24 19:52:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-May-24 19:52:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:52:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:52:57 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-24 19:52:57 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-May-24 19:52:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:52:57 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2010-May-24 19:52:57 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2010-May-24 19:52:57 LOG2 CIMA-antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39652 J 2010-May-24 19:52:57 LOG2 CIMA-antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 19:52:57 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 85976 2010 144 0.0 2010-May-24 19:52:57 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 19:52:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-May-24 19:52:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-May-24 19:52:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-May-24 19:52:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-May-24 19:52:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-May-24 19:52:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2010-May-24 19:52:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-May-24 19:52:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2010-May-24 19:52:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2010-May-24 19:52:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2010-May-24 19:52:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2010-May-24 19:52:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2010-May-24 19:52:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2010-May-24 19:52:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2010-May-24 19:52:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2010-May-24 19:52:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2010-May-24 19:52:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-May-24 19:52:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-24 19:52:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2010-May-24 19:52:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2010-May-24 19:53:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2010-May-24 19:53:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2010-May-24 19:53:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2010-May-24 19:53:00 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-24 19:53:00 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-May-24 19:53:00 LOG5 begin_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2010-May-24 19:53:00 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-May-24 19:53:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-May-24 19:53:00 LOG1 config_iflo: Receiver ALFA already selected 2010-May-24 19:53:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 19:53:00 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-24 19:53:00 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 19:53:00 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-May-24 19:53:00 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 19:53:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 19:53:00 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-May-24 19:53:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 19:53:00 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-24 19:53:00 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-May-24 19:53:00 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-May-24 19:53:00 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-May-24 19:53:00 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-May-24 19:53:00 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-May-24 19:53:00 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-May-24 19:53:00 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-May-24 19:53:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2010-May-24 19:53:00 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-May-24 19:53:00 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-May-24 19:53:00 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-May-24 19:53:00 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-May-24 19:53:00 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-May-24 19:53:00 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-May-24 19:53:00 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-May-24 19:53:00 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-May-24 19:53:00 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-May-24 19:53:00 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-May-24 19:53:00 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-May-24 19:53:00 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-May-24 19:53:00 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-May-24 19:53:00 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-May-24 19:53:00 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-May-24 19:53:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:53:00 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-May-24 19:53:00 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-May-24 19:53:00 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-May-24 19:53:00 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-May-24 19:53:00 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-May-24 19:53:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-May-24 19:53:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 19:53:00 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-May-24 19:53:00 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2010-May-24 19:53:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2010-May-24 19:53:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-May-24 19:53:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:53:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 19:53:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:53:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:53:00 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-May-24 19:53:00 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-May-24 19:53:00 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2010-May-24 19:53:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-May-24 19:53:01 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-May-24 19:53:01 LOG5 finish_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2010-May-24 19:53:01 DONE finish_task: DONE finished configuration: IF/LO path 2010-May-24 19:53:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-24 19:53:01 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-May-24 19:53:01 LOG5 end_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2010-May-24 19:53:01 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-May-24 19:53:01 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2010-May-24 19:53:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-May-24 19:53:01 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-May-24 19:53:01 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-May-24 19:53:01 START begin_task: Starting task 'selecting calibration port' 2010-May-24 19:53:01 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2010-May-24 19:53:01 LOG3 vw_send: To DATATAKING: calport 3 2010-May-24 19:53:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-May-24 19:53:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 19:53:01 START begin_task: Starting task 'waiting on calport' 2010-May-24 19:53:01 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2010-May-24 19:53:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:53:01 LOG4 got_cormsg: From DATATAKING: calport 3 2010-May-24 19:53:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 19:53:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:53:01 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 19:53:01 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-May-24 19:53:01 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2010-May-24 19:53:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-May-24 19:53:01 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-May-24 19:53:01 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2010-May-24 19:53:01 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-24 19:53:01 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-24 19:53:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 19:53:01 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2010-May-24 19:53:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:53:01 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 19:53:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-24 19:53:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 19:53:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 19:53:01 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2010-May-24 19:53:01 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-May-24 19:53:01 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-May-24 19:53:01 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-May-24 19:53:01 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-May-24 19:53:01 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-May-24 19:53:01 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-May-24 19:53:01 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-May-24 19:53:01 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-May-24 19:53:01 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-24 19:53:01 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-24 19:53:01 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-24 19:53:01 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-24 19:53:01 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-May-24 19:53:01 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-May-24 19:53:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 19:53:01 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-May-24 19:53:02 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 19:53:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-May-24 19:53:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-24 19:53:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-May-24 19:53:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 19:53:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 19:53:02 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-May-24 19:53:02 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-May-24 19:53:02 STOP finish_task: Finishing task 'configuring WAPPs' 2010-May-24 19:53:02 LOG5 finish_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2010-May-24 19:53:02 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-May-24 19:53:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-24 19:53:02 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-May-24 19:53:02 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2010-May-24 19:53:02 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2010-May-24 19:53:02 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2010-May-24 19:53:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2010-May-24 19:53:02 INFO1 config_mock: Starting to configure the Mock spectrometer 2010-May-24 19:53:02 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-May-24 19:53:02 START begin_task: Starting task 'selecting calibration port' 2010-May-24 19:53:02 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2010-May-24 19:53:02 LOG3 vw_send: To DATATAKING: calport 3 2010-May-24 19:53:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-May-24 19:53:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 19:53:02 START begin_task: Starting task 'waiting on calport' 2010-May-24 19:53:02 LOG5 begin_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2010-May-24 19:53:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-24 19:53:02 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-May-24 19:53:02 LOG4 got_cormsg: From DATATAKING: calport 3 2010-May-24 19:53:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 19:53:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:53:02 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 19:53:02 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-May-24 19:53:02 LOG5 end_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2010-May-24 19:53:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-May-24 19:53:02 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-May-24 19:53:02 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2010-May-24 19:53:02 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-24 19:53:02 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-24 19:53:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 19:53:02 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2010-May-24 19:53:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:53:02 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 19:53:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-24 19:53:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 19:53:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 19:53:02 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2010-May-24 19:53:02 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-May-24 19:53:02 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-May-24 19:53:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 19:53:02 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2010-May-24 19:53:02 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 19:53:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-24 19:53:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 19:53:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 19:53:02 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2010-May-24 19:53:02 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2010-May-24 19:53:02 LOG3 socket_wait: To MOCK: NOP 2010-May-24 19:53:02 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2010-May-24 19:53:02 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2010-May-24 19:53:03 ALERT got_mock_message: Mock spectrometer restarting 2010-May-24 19:53:03 LOG4 from_mock: From MOCK: nop ok 2010-May-24 19:53:03 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2010-May-24 19:53:03 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2010-May-24 19:53:03 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2010-May-24 19:53:03 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2010-May-24 19:53:03 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2010-May-24 19:53:03 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2010-May-24 19:53:03 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2010-May-24 19:53:03 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2010-May-24 19:53:03 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2010-May-24 19:53:03 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2010-May-24 19:53:03 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2010-May-24 19:53:03 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2010-May-24 19:53:03 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2010-May-24 19:53:03 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2010-May-24 19:53:03 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2010-May-24 19:53:03 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2010-May-24 19:53:03 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2010-May-24 19:53:03 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2010-May-24 19:53:03 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2010-May-24 19:53:03 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2010-May-24 19:53:03 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2010-May-24 19:53:03 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2010-May-24 19:53:03 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2010-May-24 19:53:03 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2010-May-24 19:53:03 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2010-May-24 19:53:04 LOG4 from_mock: From MOCK: confok 2010-May-24 19:53:04 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2010-May-24 19:53:04 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2010-May-24 19:53:04 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2010-May-24 19:53:04 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2010-May-24 19:53:04 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2010-May-24 19:53:04 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2010-May-24 19:53:04 LOG5 begin_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2010-May-24 19:53:04 LOG4 from_mock: From MOCK: confok 2010-May-24 19:53:04 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2010-May-24 19:53:04 LOG5 end_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2010-May-24 19:53:04 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2010-May-24 19:53:04 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2010-May-24 19:53:04 LOG5 finish_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2010-May-24 19:53:04 DONE finish_task: DONE finished configuring: the Mock spectrometer 2010-May-24 19:53:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-24 19:53:05 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2010-May-24 19:53:05 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2010-May-24 19:53:05 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2010-May-24 19:53:05 COMMAND run_command_line: EXECUTING command 28: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2010-May-24 19:53:05 COMMAND run_command_line: EXECUTING command 29: 'CATALOG AGESFull.cat' 2010-May-24 19:53:05 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2010-May-24 19:53:05 COMMAND run_command_line: EXECUTING command 32: 'IF LSTSLEW(AGESVC1A_p3_001) < 114333 THEN' 2010-May-24 19:53:05 LOG3 is_if_valid: Current source data: up 318.0 12.5 UP - - 105 0.6 2010-May-24 19:53:05 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1A_p3_001) < 114333 2010-May-24 19:53:05 INFO5 is_if_valid: Condition parsed as: 11.608648000000001 < 11.725833333333334 2010-May-24 19:53:05 COMMAND run_command_line: EXECUTING command 33: 'FIXEDDRIFT az=325.31 alfaangle=48.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p3_001 ra=120900.00 dec=90000.00' 2010-May-24 19:53:05 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-May-24 19:53:07 WARNING check_obsmode: WARNING failed to get a response from the CIMA frontend when checking options for 'fixed azimuth drift map'! 2010-May-24 19:53:07 NOTE check_obsmode: Assuming that the options are OK 2010-May-24 19:53:07 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 325.31 48.3 hcorcal 5 tracking no off lcorcal first 1 AGESVC1A_p3_001 120900.00 90000.00 J 8500.0 Heliocentric velocity(optical)' 2010-May-24 19:53:07 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-May-24 19:53:07 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2010-May-24 19:53:07 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'galfasrc' 2010-May-24 19:53:07 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-May-24 19:53:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p3_001} 2010-May-24 19:53:07 INFO3 fixed_driftmap: Sending telescope to Az = 325.31 and ZA = 11.33 2010-May-24 19:53:07 LOG3 track_source: Calling 'track_source AGESVC1A_p3_001 325.31 11.3316050027 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-24 19:53:07 START begin_task: Starting task 'sending tracking commands' 2010-May-24 19:53:07 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2010-May-24 19:53:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p3_001} INFO {Slewing to source 'AGESVC1A_p3_001' ...} 2010-May-24 19:53:07 INFO1 track_source: Starting to track AGESVC1A_p3_001 2010-May-24 19:53:07 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p3_001" 2010-May-24 19:53:07 LOG3 vw_send: To DATATAKING: set ra 325.31 2010-May-24 19:53:07 LOG3 vw_send: To DATATAKING: set dec 11.3316050027 2010-May-24 19:53:07 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-24 19:53:07 LOG3 vw_send: To DATATAKING: pnt tr 325.31 11.3316050027 -CF 2010-May-24 19:53:07 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-24 19:53:07 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-24 19:53:07 LOG5 finish_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2010-May-24 19:53:07 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-24 19:53:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 19:53:07 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-24 19:53:07 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2010-May-24 19:53:07 START begin_task: Starting task 'rotate ALFA to +48.3 degrees' 2010-May-24 19:53:07 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2010-May-24 19:53:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +48.3 degrees ...} 2010-May-24 19:53:08 INFO2 rotate_alfa: ALFA commanded to +48.3 degrees 2010-May-24 19:53:08 LOG3 sock_errsend: To ALFAMOTOR: POSITION 48.3 REPLY 2010-May-24 19:53:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-May-24 19:53:08 START begin_task: Starting task 'waiting on ALFA rotation' 2010-May-24 19:53:08 LOG5 begin_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2010-May-24 19:53:08 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-24 19:53:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p3_001" 2010-May-24 19:53:08 LOG4 got_cormsg: From DATATAKING: set ra 325.31 2010-May-24 19:53:08 LOG4 got_cormsg: From DATATAKING: set dec 11.3316050027 2010-May-24 19:53:08 LOG4 got_cormsg: From DATATAKING: vw% 325.31 2010-May-24 19:53:08 LOG4 got_cormsg: From DATATAKING: vw% 11.3316050027 2010-May-24 19:53:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:53:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-24 19:53:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:53:08 LOG4 got_cormsg: From DATATAKING: pnt tr 325.31 11.3316050027 -CF 2010-May-24 19:53:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-24 19:53:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-24 19:53:25 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-May-24 19:53:25 INFO3 alfa_motor: ALFA rotator in-position +48.30 degrees 2010-May-24 19:53:25 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-May-24 19:53:25 LOG5 end_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2010-May-24 19:53:25 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 19:53:25 STOP finish_task: Finishing task 'rotate ALFA to +48.3 degrees' 2010-May-24 19:53:25 LOG5 finish_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2010-May-24 19:53:25 INFO2 finish_task: DONE finished configuration: rotating ALFA to +48.3 degrees 2010-May-24 19:53:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 19:53:25 STOP end_task: Finishing task 'rotate ALFA to +48.3 degrees' with status 'OK' 2010-May-24 19:53:25 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2010-May-24 19:53:25 START begin_task: Starting task 'waiting on telescope' 2010-May-24 19:53:25 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2010-May-24 19:53:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-24 19:53:25 LOG3 waittrk: Start waittrk 5 2010-May-24 19:53:25 START begin_task: Starting task 'waiting on telescope movement' 2010-May-24 19:53:25 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2010-May-24 19:53:30 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-24 19:53:30 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2010-May-24 19:53:30 START begin_task: Starting task 'waiting on telescope on source' 2010-May-24 19:53:30 LOG5 begin_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2010-May-24 19:53:30 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-24 19:53:30 LOG5 end_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2010-May-24 19:53:30 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 19:53:30 INFO2 waittrk: Now tracking AGESVC1A_p3_001 2010-May-24 19:53:30 LOG4 waittrk: Current telescope position: Az = 324.94 ZA = 11.31 2010-May-24 19:53:30 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-24 19:53:30 LOG5 finish_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2010-May-24 19:53:30 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-24 19:53:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 19:53:30 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-24 19:53:30 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2010-May-24 19:53:30 START begin_task: Starting task 'selecting calibration type' 2010-May-24 19:53:30 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2010-May-24 19:53:30 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-24 19:53:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-24 19:53:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 19:53:31 START begin_task: Starting task 'waiting on setcal' 2010-May-24 19:53:31 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2010-May-24 19:53:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-24 19:53:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 19:53:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:53:31 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 19:53:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-24 19:53:31 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2010-May-24 19:53:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-24 19:53:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 19:53:31 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-24 19:53:31 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 19:53:31 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2010-May-24 19:53:31 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 19:53:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 19:53:31 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2010-May-24 19:53:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 19:53:31 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-24 19:53:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 19:53:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-24 19:53:31 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 19:53:31 LOG5 begin_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2010-May-24 19:53:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:53:31 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 19:53:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 19:53:31 LOG5 end_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2010-May-24 19:53:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 19:53:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-24 19:53:31 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-24 19:53:31 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2010-May-24 19:53:31 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2010-May-24 19:53:31 INFO2 astwait: Waiting for 370 seconds from 23:53:31 to 23:59:41 UTC ... 2010-May-24 19:53:31 LOG4 send_obs_status: To obs_status: <1> TASKTIME 370 BITMAP stat_wait MESSAGE {Waiting ...} 2010-May-24 19:53:31 START begin_task: Starting task 'waiting on waiting for AST time' 2010-May-24 19:53:31 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2010-May-24 19:59:41 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2010-May-24 19:59:41 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2010-May-24 19:59:41 INFO3 astwait: Finished waiting 2010-May-24 19:59:41 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-May-24 19:59:41 LOG5 dopset_later: Calling 'dopset_later 61.064332899324285' 2010-May-24 19:59:41 INFO3 dopset_later: Setting Doppler correction for 20:00:41 (61.1 seconds from now) 2010-May-24 19:59:41 LOG5 antvel: Calling 'antvel 325.310000 11.331605 F Heliocentric 61.064332899324285' 2010-May-24 19:59:41 LOG2 antvel: Transforming current Az = 325.31 ZA = 11.33 to apparent RA = 12:09:33.3 Dec = +08:56:24.8 2010-May-24 19:59:41 LOG2 antvel: Parameters to Doppler: Heliocentric 86441 2010 144 0.0 2010-May-24 19:59:41 INFO5 antvel: Computed antenna velocity: +26.14476 km/s 2010-May-24 19:59:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=26.144759506100002 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-May-24 19:59:41 INFO4 dopset_gen: New sky frequencies: 1381.122981 1381.122981 1381.122981 1381.122981 1381.122981 1381.122981 1381.122981 1381.122981 1381.122981 2010-May-24 19:59:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.122981 sky0=1381.122981 sky1=1381.122981 sky2=1381.122981 sky3=1381.122981 sky4=1381.122981 sky5=1381.122981 sky6=1381.122981 sky7=1381.122981 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 19:59:41 LOG2 dopset_gen: Result from 'sky2syn': 1631.122981 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 19:59:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631122981.0} 2010-May-24 19:59:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:59:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2010-May-24 19:59:41 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2010-May-24 19:59:41 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.3 Dec = +08:59:53.1 2010-May-24 19:59:41 LOG3 track_source: Calling 'track_source AGESVC1A_p3_001 120803.3 085953.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-24 19:59:41 START begin_task: Starting task 'sending tracking commands' 2010-May-24 19:59:41 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-May-24 19:59:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p3_001} INFO {Slewing to source 'AGESVC1A_p3_001' ...} 2010-May-24 19:59:41 INFO1 track_source: Starting to track AGESVC1A_p3_001 2010-May-24 19:59:41 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p3_001" 2010-May-24 19:59:41 LOG3 vw_send: To DATATAKING: set ra 120803.3 2010-May-24 19:59:41 LOG3 vw_send: To DATATAKING: set dec 085953.1 2010-May-24 19:59:41 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-24 19:59:41 LOG3 vw_send: To DATATAKING: pnt tr 120803.3 085953.1 -CJ 2010-May-24 19:59:41 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-24 19:59:41 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-24 19:59:41 LOG5 finish_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-May-24 19:59:41 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-24 19:59:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 19:59:41 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-24 19:59:41 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-May-24 19:59:41 START begin_task: Starting task 'waiting on telescope' 2010-May-24 19:59:41 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2010-May-24 19:59:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-24 19:59:41 LOG3 waittrk: Start waittrk 5 2010-May-24 19:59:41 START begin_task: Starting task 'waiting on telescope movement' 2010-May-24 19:59:41 LOG5 begin_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2010-May-24 19:59:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631122981.0} 2010-May-24 19:59:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 19:59:41 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p3_001" 2010-May-24 19:59:41 LOG4 got_cormsg: From DATATAKING: set ra 120803.3 2010-May-24 19:59:41 LOG4 got_cormsg: From DATATAKING: set dec 085953.1 2010-May-24 19:59:41 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-24 19:59:41 LOG4 got_cormsg: From DATATAKING: vw% 120803.3 2010-May-24 19:59:41 LOG4 got_cormsg: From DATATAKING: vw% 085953.1 2010-May-24 19:59:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:59:41 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-24 19:59:41 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.3 085953.1 -CJ 2010-May-24 19:59:41 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-24 19:59:41 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-24 19:59:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:59:46 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-24 19:59:46 LOG5 end_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2010-May-24 19:59:46 START begin_task: Starting task 'waiting on telescope on source' 2010-May-24 19:59:46 LOG5 begin_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2010-May-24 19:59:48 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-24 19:59:48 LOG5 end_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2010-May-24 19:59:48 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 19:59:48 INFO2 waittrk: Now tracking AGESVC1A_p3_001 2010-May-24 19:59:48 LOG4 waittrk: Current telescope position: Az = 325.02 ZA = 11.31 2010-May-24 19:59:48 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-24 19:59:48 LOG5 finish_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2010-May-24 19:59:48 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-24 19:59:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 19:59:48 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-24 19:59:48 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2010-May-24 19:59:48 START begin_task: Starting task 'adjusting WAPP+Mock power' 2010-May-24 19:59:48 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2010-May-24 19:59:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2010-May-24 19:59:48 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2010-May-24 19:59:48 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-May-24 19:59:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-May-24 19:59:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 19:59:48 START begin_task: Starting task 'waiting on adjpwrif2' 2010-May-24 19:59:48 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2010-May-24 19:59:49 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-May-24 19:59:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 19:59:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:59:51 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 19:59:51 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-May-24 19:59:51 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2010-May-24 19:59:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-May-24 19:59:51 START begin_task: Starting task 'adjusting WAPP power' 2010-May-24 19:59:51 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2010-May-24 19:59:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-24 19:59:52 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 19:59:52 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 19:59:52 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 19:59:52 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 19:59:52 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-May-24 19:59:52 LOG5 begin_task: Level: (5) ID = <10126> Status = 0 0 0 0 ok 2010-May-24 19:59:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-May-24 19:59:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 19:59:52 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-May-24 19:59:52 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 5 dB 2010-May-24 19:59:52 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 4 3 dB 2010-May-24 19:59:52 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-May-24 19:59:52 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-May-24 19:59:52 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-May-24 19:59:52 LOG5 end_task: Level: (5) ID = <10126> Status = 0 0 0 0 ok 2010-May-24 19:59:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.966 0.971 ALFA beam 1: 1.049 1.076 2010-May-24 19:59:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.006 0.979 ALFA beam 3: 0.942 1.024 2010-May-24 19:59:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.929 0.927 ALFA beam 5: 0.956 1.031 2010-May-24 19:59:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.932 0.907 ALFA beam 7: 1.016 1.060 2010-May-24 19:59:52 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-24 19:59:52 LOG5 finish_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2010-May-24 19:59:52 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-May-24 19:59:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 19:59:52 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-24 19:59:52 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2010-May-24 19:59:52 START begin_task: Starting task 'adjusting Mock spectrometer power' 2010-May-24 19:59:52 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2010-May-24 19:59:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-24 19:59:52 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2010-May-24 19:59:52 LOG3 socket_wait: To MOCK: ADJP30 2010-May-24 19:59:52 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2010-May-24 19:59:52 LOG5 begin_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2010-May-24 20:00:01 NOTE from_mock: From MOCK: adjperr pdevs5 sigsReply: 2010-May-24 20:00:01 LOG1 task_failed: Task 'waiting on adjust Mock spectrometer power' failed! 2010-May-24 20:00:01 LOG5 task_failed: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2010-May-24 20:00:01 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'FAILED' 2010-May-24 20:00:01 LOG5 end_task: Level: (5) ID = <10128> Status = 0 0 0 1 failed 2010-May-24 20:00:01 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2010-May-24 20:00:01 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2010-May-24 20:00:01 LOG5 finish_task: Level: (4) ID = <10127> Status = 0 0 0 1 failed 2010-May-24 20:00:01 ERROR finish_task: ERROR failed adjusting: Mock spectrometer power 2010-May-24 20:00:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-May-24 20:00:01 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'FAILED' 2010-May-24 20:00:01 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 1 failed 2010-May-24 20:00:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-24 20:00:01 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2010-May-24 20:00:01 LOG5 finish_task: Level: (3) ID = <10123> Status = 0 0 0 1 failed 2010-May-24 20:00:01 ERROR finish_task: ERROR failed adjusting: WAPP+Mock power levels 2010-May-24 20:00:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-May-24 20:00:01 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'FAILED' 2010-May-24 20:00:01 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 1 failed 2010-May-24 20:00:01 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-May-24 20:00:01 LOG5 finish_task: Level: (2) ID = <10107> Status = 0 0 0 1 failed 2010-May-24 20:00:01 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2010-May-24 20:00:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-May-24 20:00:01 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2010-May-24 20:00:01 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 1 failed 2010-May-24 20:00:01 ALERT run_command_file: Stopping command file processing at line 33! 2010-May-24 20:00:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-May-24 20:00:01 STOP finish_task: Finishing task 'running command file '100524.cmd'' 2010-May-24 20:00:01 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 1 failed 2010-May-24 20:00:01 ERROR finish_task: ERROR failed running: command file '100524.cmd' 2010-May-24 20:00:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-May-24 20:00:01 END end_task: Finishing task 'running command file '100524.cmd'' with status 'FAILED' 2010-May-24 20:00:01 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 1 failed 2010-May-24 20:00:32 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-May-24 20:00:32 LOG4 exec_msg: From OBSERVER: run_command_file 100524.cmd 27 1 28 2010-May-24 20:00:32 LOG4 run_command_file: Calling 'run_command_file 100524.cmd 27 1 28' 2010-May-24 20:00:32 BEGIN begin_task: Starting task 'running command file '100524.cmd'' 2010-May-24 20:00:32 LOG5 begin_task: Level: (1) ID = <10129> Status = 0 0 0 0 ok 2010-May-24 20:00:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100524.cmd' ...} 2010-May-24 20:00:32 NOTE run_command_file: Starting execution of command file '100524.cmd' from line 27 2010-May-24 20:00:32 COMMAND run_command_line: EXECUTING command 27: 'LOAD ages_mock.conf' 2010-May-24 20:00:32 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-May-24 20:00:32 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-24 20:00:32 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-May-24 20:00:32 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2010-May-24 20:00:32 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2010-May-24 20:00:32 LOG2 CIMA-antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.39653 J 2010-May-24 20:00:32 LOG2 CIMA-antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.8 2010-May-24 20:00:32 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 86432 2010 144 0.0 2010-May-24 20:00:32 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-May-24 20:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2010-May-24 20:00:34 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2010-May-24 20:00:35 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-24 20:00:35 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-May-24 20:00:35 LOG5 begin_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2010-May-24 20:00:35 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-May-24 20:00:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-May-24 20:00:35 LOG1 config_iflo: Receiver ALFA already selected 2010-May-24 20:00:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 20:00:35 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-24 20:00:35 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 20:00:35 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2010-May-24 20:00:35 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 20:00:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 20:00:35 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2010-May-24 20:00:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 20:00:35 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-24 20:00:35 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-May-24 20:00:35 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-May-24 20:00:35 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-May-24 20:00:35 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-May-24 20:00:35 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-May-24 20:00:35 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-May-24 20:00:35 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-May-24 20:00:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2010-May-24 20:00:35 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-May-24 20:00:35 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-May-24 20:00:35 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-May-24 20:00:35 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-May-24 20:00:35 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-May-24 20:00:35 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-May-24 20:00:35 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-May-24 20:00:35 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-May-24 20:00:35 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-May-24 20:00:35 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-May-24 20:00:35 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-May-24 20:00:35 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-May-24 20:00:35 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-May-24 20:00:35 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-May-24 20:00:35 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-May-24 20:00:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 20:00:35 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-May-24 20:00:35 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-May-24 20:00:35 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-May-24 20:00:35 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-May-24 20:00:35 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-May-24 20:00:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-May-24 20:00:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:00:35 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-May-24 20:00:35 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2010-May-24 20:00:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2010-May-24 20:00:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-May-24 20:00:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 20:00:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:00:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:00:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:00:36 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-May-24 20:00:36 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-May-24 20:00:36 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2010-May-24 20:00:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-May-24 20:00:36 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-May-24 20:00:36 LOG5 finish_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2010-May-24 20:00:36 DONE finish_task: DONE finished configuration: IF/LO path 2010-May-24 20:00:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-24 20:00:36 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-May-24 20:00:36 LOG5 end_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2010-May-24 20:00:36 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-May-24 20:00:36 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2010-May-24 20:00:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-May-24 20:00:36 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-May-24 20:00:36 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-May-24 20:00:36 START begin_task: Starting task 'selecting calibration port' 2010-May-24 20:00:36 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-May-24 20:00:36 LOG3 vw_send: To DATATAKING: calport 3 2010-May-24 20:00:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-May-24 20:00:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:00:36 START begin_task: Starting task 'waiting on calport' 2010-May-24 20:00:36 LOG5 begin_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2010-May-24 20:00:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:00:36 LOG4 got_cormsg: From DATATAKING: calport 3 2010-May-24 20:00:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:00:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:00:36 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 20:00:36 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-May-24 20:00:36 LOG5 end_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2010-May-24 20:00:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-May-24 20:00:36 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-May-24 20:00:36 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-May-24 20:00:36 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-24 20:00:36 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-24 20:00:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 20:00:36 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2010-May-24 20:00:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:00:36 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 20:00:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-24 20:00:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 20:00:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 20:00:36 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2010-May-24 20:00:36 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-May-24 20:00:36 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-May-24 20:00:36 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-May-24 20:00:37 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-May-24 20:00:37 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-May-24 20:00:37 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-May-24 20:00:37 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-May-24 20:00:37 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-May-24 20:00:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-24 20:00:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-24 20:00:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-24 20:00:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-24 20:00:37 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-May-24 20:00:37 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-May-24 20:00:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 20:00:37 LOG5 begin_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2010-May-24 20:00:37 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 20:00:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-May-24 20:00:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-24 20:00:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-May-24 20:00:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 20:00:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 20:00:37 LOG5 end_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2010-May-24 20:00:37 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-May-24 20:00:37 STOP finish_task: Finishing task 'configuring WAPPs' 2010-May-24 20:00:37 LOG5 finish_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2010-May-24 20:00:37 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-May-24 20:00:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-24 20:00:37 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-May-24 20:00:37 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2010-May-24 20:00:37 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2010-May-24 20:00:37 LOG5 begin_task: Level: (2) ID = <10138> Status = 0 0 0 0 ok 2010-May-24 20:00:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2010-May-24 20:00:37 INFO1 config_mock: Starting to configure the Mock spectrometer 2010-May-24 20:00:37 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-May-24 20:00:37 START begin_task: Starting task 'selecting calibration port' 2010-May-24 20:00:37 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2010-May-24 20:00:37 LOG3 vw_send: To DATATAKING: calport 3 2010-May-24 20:00:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-May-24 20:00:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:00:37 START begin_task: Starting task 'waiting on calport' 2010-May-24 20:00:37 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2010-May-24 20:00:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-24 20:00:37 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-May-24 20:00:37 LOG4 got_cormsg: From DATATAKING: calport 3 2010-May-24 20:00:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:00:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:00:37 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 20:00:37 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-May-24 20:00:37 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2010-May-24 20:00:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-May-24 20:00:37 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-May-24 20:00:37 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2010-May-24 20:00:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-24 20:00:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-24 20:00:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 20:00:37 LOG5 begin_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2010-May-24 20:00:37 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 20:00:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:00:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-24 20:00:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 20:00:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 20:00:37 LOG5 end_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2010-May-24 20:00:37 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-May-24 20:00:37 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-May-24 20:00:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 20:00:38 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2010-May-24 20:00:38 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 20:00:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-24 20:00:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 20:00:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 20:00:38 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2010-May-24 20:00:38 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2010-May-24 20:00:38 LOG3 socket_wait: To MOCK: NOP 2010-May-24 20:00:38 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2010-May-24 20:00:38 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2010-May-24 20:00:38 LOG4 from_mock: From MOCK: nop ok 2010-May-24 20:00:38 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2010-May-24 20:00:38 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2010-May-24 20:00:38 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2010-May-24 20:00:38 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2010-May-24 20:00:38 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2010-May-24 20:00:38 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2010-May-24 20:00:38 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2010-May-24 20:00:38 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2010-May-24 20:00:38 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2010-May-24 20:00:38 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2010-May-24 20:00:38 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2010-May-24 20:00:38 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2010-May-24 20:00:38 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2010-May-24 20:00:38 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2010-May-24 20:00:38 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2010-May-24 20:00:38 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2010-May-24 20:00:38 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2010-May-24 20:00:38 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2010-May-24 20:00:38 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2010-May-24 20:00:38 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2010-May-24 20:00:38 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2010-May-24 20:00:38 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2010-May-24 20:00:38 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2010-May-24 20:00:38 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2010-May-24 20:00:38 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-May-24 20:00:39 LOG4 from_mock: From MOCK: confok 2010-May-24 20:00:39 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2010-May-24 20:00:39 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-May-24 20:00:39 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2010-May-24 20:00:39 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2010-May-24 20:00:39 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2010-May-24 20:00:39 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2010-May-24 20:00:39 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2010-May-24 20:00:39 LOG4 from_mock: From MOCK: confok 2010-May-24 20:00:39 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2010-May-24 20:00:39 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2010-May-24 20:00:39 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2010-May-24 20:00:39 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2010-May-24 20:00:39 LOG5 finish_task: Level: (2) ID = <10138> Status = 0 0 0 0 ok 2010-May-24 20:00:39 DONE finish_task: DONE finished configuring: the Mock spectrometer 2010-May-24 20:00:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-24 20:00:39 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2010-May-24 20:00:39 LOG5 end_task: Level: (2) ID = <10138> Status = 0 0 0 0 ok 2010-May-24 20:00:39 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2010-May-24 20:00:40 COMMAND run_command_line: EXECUTING command 28: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2010-May-24 20:00:40 COMMAND run_command_line: EXECUTING command 29: 'CATALOG AGESFull.cat' 2010-May-24 20:00:40 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2010-May-24 20:00:40 COMMAND run_command_line: EXECUTING command 32: 'IF LSTSLEW(AGESVC1A_p3_001) < 114333 THEN' 2010-May-24 20:00:40 LOG3 is_if_valid: Current source data: up 325.3 11.3 UP - - 97 0.1 2010-May-24 20:00:40 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1A_p3_001) < 114333 2010-May-24 20:00:40 INFO5 is_if_valid: Condition parsed as: 11.727049666666668 < 11.725833333333334 2010-May-24 20:00:40 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGESVC1A_p3_001) < 114333 THEN' 2010-May-24 20:00:40 COMMAND run_command_line: EXECUTING command 33: 'FIXEDDRIFT az=325.31 alfaangle=48.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p3_001 ra=120900.00 dec=90000.00' 2010-May-24 20:00:40 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=325.31 alfaangle=48.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p3_001 ra=120900.00 dec=90000.00' in non-true conditional branch 2010-May-24 20:00:40 COMMAND run_command_line: EXECUTING command 36: 'ENDIF' 2010-May-24 20:00:40 COMMAND run_command_line: EXECUTING command 39: 'IF LSTSLEW(AGESVC1B_p2_038) < 120632 THEN' 2010-May-24 20:00:41 LOG3 is_if_valid: Current source data: up 311.3 15.2 UP - - 115 1.7 2010-May-24 20:00:41 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1B_p2_038) < 120632 2010-May-24 20:00:41 INFO5 is_if_valid: Condition parsed as: 11.753716333333335 < 12.108888888888888 2010-May-24 20:00:41 COMMAND run_command_line: EXECUTING command 40: 'FIXEDDRIFT az=330.85 alfaangle=43.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_038 ra=122900.00 dec=80430.00' 2010-May-24 20:00:41 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-May-24 20:00:41 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-24 20:00:41 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 330.85 43.4 hcorcal 5 tracking no off lcorcal first 1 AGESVC1B_p2_038 122900.00 80430.00 J 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:00:41 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-May-24 20:00:41 LOG5 begin_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2010-May-24 20:00:41 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGESVC1A_p3_001' 2010-May-24 20:00:41 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-May-24 20:00:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p2_038} 2010-May-24 20:00:41 INFO3 fixed_driftmap: Sending telescope to Az = 330.85 and ZA = 11.75 2010-May-24 20:00:41 LOG3 track_source: Calling 'track_source AGESVC1B_p2_038 330.85 11.7527308544 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:00:41 START begin_task: Starting task 'sending tracking commands' 2010-May-24 20:00:41 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2010-May-24 20:00:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_038} INFO {Slewing to source 'AGESVC1B_p2_038' ...} 2010-May-24 20:00:41 INFO1 track_source: Starting to track AGESVC1B_p2_038 2010-May-24 20:00:41 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_038" 2010-May-24 20:00:41 LOG3 vw_send: To DATATAKING: set ra 330.85 2010-May-24 20:00:41 LOG3 vw_send: To DATATAKING: set dec 11.7527308544 2010-May-24 20:00:41 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-24 20:00:41 LOG3 vw_send: To DATATAKING: pnt tr 330.85 11.7527308544 -CF 2010-May-24 20:00:41 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:00:41 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-24 20:00:41 LOG5 finish_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2010-May-24 20:00:41 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-24 20:00:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:00:41 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-24 20:00:41 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2010-May-24 20:00:42 START begin_task: Starting task 'rotate ALFA to +43.4 degrees' 2010-May-24 20:00:42 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2010-May-24 20:00:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +43.4 degrees ...} 2010-May-24 20:00:42 INFO2 rotate_alfa: ALFA commanded to +43.4 degrees 2010-May-24 20:00:42 LOG3 sock_errsend: To ALFAMOTOR: POSITION 43.4 REPLY 2010-May-24 20:00:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-May-24 20:00:42 START begin_task: Starting task 'waiting on ALFA rotation' 2010-May-24 20:00:42 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2010-May-24 20:00:42 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_038" 2010-May-24 20:00:42 LOG4 got_cormsg: From DATATAKING: set ra 330.85 2010-May-24 20:00:42 LOG4 got_cormsg: From DATATAKING: set dec 11.7527308544 2010-May-24 20:00:42 LOG4 got_cormsg: From DATATAKING: vw% 330.85 2010-May-24 20:00:42 LOG4 got_cormsg: From DATATAKING: vw% 11.7527308544 2010-May-24 20:00:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:00:42 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-24 20:00:42 LOG4 got_cormsg: From DATATAKING: pnt tr 330.85 11.7527308544 -CF 2010-May-24 20:00:42 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:00:42 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-24 20:00:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:00:45 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-May-24 20:00:45 INFO3 alfa_motor: ALFA rotator in-position +43.40 degrees 2010-May-24 20:00:46 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-May-24 20:00:46 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2010-May-24 20:00:46 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 20:00:46 STOP finish_task: Finishing task 'rotate ALFA to +43.4 degrees' 2010-May-24 20:00:46 LOG5 finish_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2010-May-24 20:00:46 INFO2 finish_task: DONE finished configuration: rotating ALFA to +43.4 degrees 2010-May-24 20:00:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:00:46 STOP end_task: Finishing task 'rotate ALFA to +43.4 degrees' with status 'OK' 2010-May-24 20:00:46 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2010-May-24 20:00:46 START begin_task: Starting task 'waiting on telescope' 2010-May-24 20:00:46 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2010-May-24 20:00:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-24 20:00:46 LOG3 waittrk: Start waittrk 5 2010-May-24 20:00:46 START begin_task: Starting task 'waiting on telescope movement' 2010-May-24 20:00:46 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2010-May-24 20:00:51 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-24 20:00:51 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2010-May-24 20:00:51 START begin_task: Starting task 'waiting on telescope on source' 2010-May-24 20:00:51 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2010-May-24 20:01:03 COMMAND CIMA-send_to_exec: Sending command to abort observation 2010-May-24 20:01:03 LOG4 exec_msg: From OBSERVER: abort_task abort 2010-May-24 20:01:03 WARNING abort_task: WARNING abort requested! 2010-May-24 20:01:03 WARNING abort_task: WARNING Aborting wait for waiting on telescope on source 2010-May-24 20:01:03 STOP end_task: Finishing task 'waiting on telescope on source' with status 'ABORT' 2010-May-24 20:01:03 LOG5 end_task: Level: (4) ID = <10152> Status = 1 0 0 0 abort 2010-May-24 20:01:03 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 20:01:03 LOG4 waittrk: Current telescope position: Az = 330.49 ZA = 11.73 2010-May-24 20:01:03 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-24 20:01:03 LOG5 finish_task: Level: (3) ID = <10150> Status = 1 0 0 0 abort 2010-May-24 20:01:03 WARNING finish_task: WARNING aborted waiting: telescope on source 2010-May-24 20:01:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Aborted 2010-May-24 20:01:03 STOP end_task: Finishing task 'waiting on telescope' with status 'ABORT' 2010-May-24 20:01:03 LOG5 end_task: Level: (3) ID = <10150> Status = 1 0 0 0 abort 2010-May-24 20:01:03 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-May-24 20:01:03 LOG5 finish_task: Level: (2) ID = <10146> Status = 1 0 0 0 abort 2010-May-24 20:01:03 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2010-May-24 20:01:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2010-May-24 20:01:03 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2010-May-24 20:01:03 LOG5 end_task: Level: (2) ID = <10146> Status = 1 0 0 0 abort 2010-May-24 20:01:03 ALERT run_command_file: Stopping command file processing at line 40! 2010-May-24 20:01:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-May-24 20:01:03 STOP finish_task: Finishing task 'running command file '100524.cmd'' 2010-May-24 20:01:03 LOG5 finish_task: Level: (1) ID = <10129> Status = 1 0 0 0 abort 2010-May-24 20:01:03 WARNING finish_task: WARNING aborted running: command file '100524.cmd' 2010-May-24 20:01:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2010-May-24 20:01:03 END end_task: Finishing task 'running command file '100524.cmd'' with status 'ABORT' 2010-May-24 20:01:03 LOG5 end_task: Level: (1) ID = <10129> Status = 1 0 0 0 abort 2010-May-24 20:01:28 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-May-24 20:01:28 LOG4 exec_msg: From OBSERVER: run_command_file 100524.cmd 33 1 28 2010-May-24 20:01:28 LOG4 run_command_file: Calling 'run_command_file 100524.cmd 33 1 28' 2010-May-24 20:01:28 BEGIN begin_task: Starting task 'running command file '100524.cmd'' 2010-May-24 20:01:28 LOG5 begin_task: Level: (1) ID = <10153> Status = 0 0 0 0 ok 2010-May-24 20:01:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100524.cmd' ...} 2010-May-24 20:01:28 NOTE run_command_file: Starting execution of command file '100524.cmd' from line 33 2010-May-24 20:01:28 COMMAND run_command_line: EXECUTING command 33: 'FIXEDDRIFT az=325.31 alfaangle=48.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p3_001 ra=120900.00 dec=90000.00' 2010-May-24 20:01:28 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-May-24 20:01:29 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-24 20:01:29 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 325.31 48.3 hcorcal 5 tracking no off lcorcal first 1 AGESVC1A_p3_001 120900.00 90000.00 J 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:01:29 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-May-24 20:01:29 LOG5 begin_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2010-May-24 20:01:29 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGESVC1B_p2_038' 2010-May-24 20:01:29 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-May-24 20:01:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p3_001} 2010-May-24 20:01:29 INFO3 fixed_driftmap: Sending telescope to Az = 325.31 and ZA = 11.33 2010-May-24 20:01:29 LOG3 track_source: Calling 'track_source AGESVC1A_p3_001 325.31 11.3316048393 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:01:29 START begin_task: Starting task 'sending tracking commands' 2010-May-24 20:01:29 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-May-24 20:01:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p3_001} INFO {Slewing to source 'AGESVC1A_p3_001' ...} 2010-May-24 20:01:29 INFO1 track_source: Starting to track AGESVC1A_p3_001 2010-May-24 20:01:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p3_001" 2010-May-24 20:01:29 LOG3 vw_send: To DATATAKING: set ra 325.31 2010-May-24 20:01:29 LOG3 vw_send: To DATATAKING: set dec 11.3316048393 2010-May-24 20:01:29 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-24 20:01:29 LOG3 vw_send: To DATATAKING: pnt tr 325.31 11.3316048393 -CF 2010-May-24 20:01:29 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:01:29 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-24 20:01:29 LOG5 finish_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-May-24 20:01:29 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-24 20:01:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:01:29 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-24 20:01:29 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-May-24 20:01:29 START begin_task: Starting task 'rotate ALFA to +48.3 degrees' 2010-May-24 20:01:29 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2010-May-24 20:01:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +48.3 degrees ...} 2010-May-24 20:01:29 INFO2 rotate_alfa: ALFA commanded to +48.3 degrees 2010-May-24 20:01:29 LOG3 sock_errsend: To ALFAMOTOR: POSITION 48.3 REPLY 2010-May-24 20:01:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-May-24 20:01:29 START begin_task: Starting task 'waiting on ALFA rotation' 2010-May-24 20:01:29 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2010-May-24 20:01:29 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p3_001" 2010-May-24 20:01:29 LOG4 got_cormsg: From DATATAKING: set ra 325.31 2010-May-24 20:01:29 LOG4 got_cormsg: From DATATAKING: set dec 11.3316048393 2010-May-24 20:01:29 LOG4 got_cormsg: From DATATAKING: vw% 325.31 2010-May-24 20:01:29 LOG4 got_cormsg: From DATATAKING: vw% 11.3316048393 2010-May-24 20:01:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:01:29 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-24 20:01:29 LOG4 got_cormsg: From DATATAKING: pnt tr 325.31 11.3316048393 -CF 2010-May-24 20:01:29 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:01:29 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-24 20:01:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:01:33 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-May-24 20:01:33 INFO3 alfa_motor: ALFA rotator in-position +48.30 degrees 2010-May-24 20:01:33 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-May-24 20:01:33 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2010-May-24 20:01:33 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 20:01:33 STOP finish_task: Finishing task 'rotate ALFA to +48.3 degrees' 2010-May-24 20:01:33 LOG5 finish_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2010-May-24 20:01:33 INFO2 finish_task: DONE finished configuration: rotating ALFA to +48.3 degrees 2010-May-24 20:01:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:01:33 STOP end_task: Finishing task 'rotate ALFA to +48.3 degrees' with status 'OK' 2010-May-24 20:01:33 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2010-May-24 20:01:33 START begin_task: Starting task 'waiting on telescope' 2010-May-24 20:01:33 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2010-May-24 20:01:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-24 20:01:34 LOG3 waittrk: Start waittrk 5 2010-May-24 20:01:34 START begin_task: Starting task 'waiting on telescope movement' 2010-May-24 20:01:34 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2010-May-24 20:01:39 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-24 20:01:39 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2010-May-24 20:01:39 START begin_task: Starting task 'waiting on telescope on source' 2010-May-24 20:01:39 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2010-May-24 20:01:57 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-24 20:01:57 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2010-May-24 20:01:57 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 20:01:57 INFO2 waittrk: Now tracking AGESVC1A_p3_001 2010-May-24 20:01:57 LOG4 waittrk: Current telescope position: Az = 324.94 ZA = 11.32 2010-May-24 20:01:57 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-24 20:01:57 LOG5 finish_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2010-May-24 20:01:57 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-24 20:01:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:01:57 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-24 20:01:57 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2010-May-24 20:01:57 START begin_task: Starting task 'selecting calibration type' 2010-May-24 20:01:57 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2010-May-24 20:01:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-24 20:01:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-24 20:01:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:01:57 START begin_task: Starting task 'waiting on setcal' 2010-May-24 20:01:57 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2010-May-24 20:01:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-24 20:01:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:01:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:01:57 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 20:01:57 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-24 20:01:57 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2010-May-24 20:01:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-24 20:01:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 20:01:57 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-24 20:01:57 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 20:01:57 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2010-May-24 20:01:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:01:57 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 20:01:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 20:01:57 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2010-May-24 20:01:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 20:01:57 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-24 20:01:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 20:01:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-24 20:01:57 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 20:01:57 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2010-May-24 20:01:57 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 20:01:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 20:01:57 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2010-May-24 20:01:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 20:01:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-24 20:01:57 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-24 20:01:57 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2010-May-24 20:01:58 LOG5 dopset_later: Calling 'dopset_later 0' 2010-May-24 20:01:58 INFO3 dopset_later: Setting Doppler correction now 2010-May-24 20:01:58 LOG5 antvel: Calling 'antvel 325.310000 11.331605 F Heliocentric 0' 2010-May-24 20:01:58 LOG2 antvel: Transforming current Az = 325.31 ZA = 11.33 to apparent RA = 12:10:49.6 Dec = +08:56:24.8 2010-May-24 20:01:58 LOG2 antvel: Parameters to Doppler: Heliocentric 86517 2010 144 0.0 2010-May-24 20:01:58 INFO5 antvel: Computed antenna velocity: +26.07172 km/s 2010-May-24 20:01:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=26.0717245795 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-May-24 20:01:58 INFO4 dopset_gen: New sky frequencies: 1381.123318 1381.123318 1381.123318 1381.123318 1381.123318 1381.123318 1381.123318 1381.123318 1381.123318 2010-May-24 20:01:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.123318 sky0=1381.123318 sky1=1381.123318 sky2=1381.123318 sky3=1381.123318 sky4=1381.123318 sky5=1381.123318 sky6=1381.123318 sky7=1381.123318 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 20:01:58 LOG2 dopset_gen: Result from 'sky2syn': 1631.123318 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 20:01:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631123318.0} 2010-May-24 20:01:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 20:01:58 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2010-May-24 20:01:58 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2010-May-24 20:01:58 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:10:20.7 Dec = +08:59:53.0 2010-May-24 20:01:58 LOG3 track_source: Calling 'track_source AGESVC1A_p3_001 121020.7 085953.0 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:01:58 START begin_task: Starting task 'sending tracking commands' 2010-May-24 20:01:58 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2010-May-24 20:01:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p3_001} INFO {Slewing to source 'AGESVC1A_p3_001' ...} 2010-May-24 20:01:58 INFO1 track_source: Starting to track AGESVC1A_p3_001 2010-May-24 20:01:58 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p3_001" 2010-May-24 20:01:58 LOG3 vw_send: To DATATAKING: set ra 121020.7 2010-May-24 20:01:58 LOG3 vw_send: To DATATAKING: set dec 085953.0 2010-May-24 20:01:58 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-24 20:01:58 LOG3 vw_send: To DATATAKING: pnt tr 121020.7 085953.0 -CJ 2010-May-24 20:01:58 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:01:58 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-24 20:01:58 LOG5 finish_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2010-May-24 20:01:58 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-24 20:01:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:01:58 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-24 20:01:58 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2010-May-24 20:01:58 START begin_task: Starting task 'waiting on telescope' 2010-May-24 20:01:58 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2010-May-24 20:01:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-24 20:01:58 LOG3 waittrk: Start waittrk 5 2010-May-24 20:01:58 START begin_task: Starting task 'waiting on telescope movement' 2010-May-24 20:01:58 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2010-May-24 20:01:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631123318.0} 2010-May-24 20:01:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 20:01:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:01:58 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p3_001" 2010-May-24 20:01:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:01:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:01:58 LOG4 got_cormsg: From DATATAKING: set ra 121020.7 2010-May-24 20:01:58 LOG4 got_cormsg: From DATATAKING: set dec 085953.0 2010-May-24 20:01:58 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-24 20:01:58 LOG4 got_cormsg: From DATATAKING: pnt tr 121020.7 085953.0 -CJ 2010-May-24 20:01:58 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:01:58 LOG4 got_cormsg: From DATATAKING: 121020.7 2010-May-24 20:01:58 LOG4 got_cormsg: From DATATAKING: vw% 085953.0 2010-May-24 20:01:58 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2010-May-24 20:02:03 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-24 20:02:03 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2010-May-24 20:02:03 START begin_task: Starting task 'waiting on telescope on source' 2010-May-24 20:02:03 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2010-May-24 20:02:05 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-24 20:02:05 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2010-May-24 20:02:05 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 20:02:05 INFO2 waittrk: Now tracking AGESVC1A_p3_001 2010-May-24 20:02:05 LOG4 waittrk: Current telescope position: Az = 325.02 ZA = 11.31 2010-May-24 20:02:05 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-24 20:02:05 LOG5 finish_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2010-May-24 20:02:05 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-24 20:02:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:02:05 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-24 20:02:05 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2010-May-24 20:02:05 START begin_task: Starting task 'adjusting WAPP+Mock power' 2010-May-24 20:02:05 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2010-May-24 20:02:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2010-May-24 20:02:05 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2010-May-24 20:02:05 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-May-24 20:02:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-May-24 20:02:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:02:05 START begin_task: Starting task 'waiting on adjpwrif2' 2010-May-24 20:02:05 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2010-May-24 20:02:05 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-May-24 20:02:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:02:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:02:09 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 20:02:09 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-May-24 20:02:09 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2010-May-24 20:02:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-May-24 20:02:09 START begin_task: Starting task 'adjusting WAPP power' 2010-May-24 20:02:09 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2010-May-24 20:02:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-24 20:02:09 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 20:02:09 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 20:02:09 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 20:02:09 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 20:02:09 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-May-24 20:02:09 LOG5 begin_task: Level: (5) ID = <10172> Status = 0 0 0 0 ok 2010-May-24 20:02:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:02:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-May-24 20:02:09 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-May-24 20:02:09 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 5 dB 2010-May-24 20:02:09 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 4 3 dB 2010-May-24 20:02:09 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-May-24 20:02:09 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-May-24 20:02:09 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-May-24 20:02:09 LOG5 end_task: Level: (5) ID = <10172> Status = 0 0 0 0 ok 2010-May-24 20:02:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.966 0.976 ALFA beam 1: 1.053 1.084 2010-May-24 20:02:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.010 0.980 ALFA beam 3: 0.942 1.023 2010-May-24 20:02:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.930 0.930 ALFA beam 5: 0.961 1.042 2010-May-24 20:02:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.932 0.904 ALFA beam 7: 1.015 1.057 2010-May-24 20:02:09 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-24 20:02:09 LOG5 finish_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2010-May-24 20:02:09 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-May-24 20:02:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:02:09 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-24 20:02:09 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2010-May-24 20:02:09 START begin_task: Starting task 'adjusting Mock spectrometer power' 2010-May-24 20:02:09 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2010-May-24 20:02:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-24 20:02:09 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2010-May-24 20:02:09 LOG3 socket_wait: To MOCK: ADJP30 2010-May-24 20:02:09 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2010-May-24 20:02:09 LOG5 begin_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2010-May-24 20:02:17 NOTE from_mock: From MOCK: adjperr pdevs5 sigsReply: 2010-May-24 20:02:17 LOG1 task_failed: Task 'waiting on adjust Mock spectrometer power' failed! 2010-May-24 20:02:17 LOG5 task_failed: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2010-May-24 20:02:17 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'FAILED' 2010-May-24 20:02:17 LOG5 end_task: Level: (5) ID = <10174> Status = 0 0 0 1 failed 2010-May-24 20:02:17 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2010-May-24 20:02:17 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2010-May-24 20:02:17 LOG5 finish_task: Level: (4) ID = <10173> Status = 0 0 0 1 failed 2010-May-24 20:02:17 ERROR finish_task: ERROR failed adjusting: Mock spectrometer power 2010-May-24 20:02:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-May-24 20:02:17 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'FAILED' 2010-May-24 20:02:17 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 1 failed 2010-May-24 20:02:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-24 20:02:17 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2010-May-24 20:02:17 LOG5 finish_task: Level: (3) ID = <10169> Status = 0 0 0 1 failed 2010-May-24 20:02:17 ERROR finish_task: ERROR failed adjusting: WAPP+Mock power levels 2010-May-24 20:02:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-May-24 20:02:17 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'FAILED' 2010-May-24 20:02:17 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 1 failed 2010-May-24 20:02:17 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-May-24 20:02:17 LOG5 finish_task: Level: (2) ID = <10154> Status = 0 0 0 1 failed 2010-May-24 20:02:17 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2010-May-24 20:02:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-May-24 20:02:17 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2010-May-24 20:02:17 LOG5 end_task: Level: (2) ID = <10154> Status = 0 0 0 1 failed 2010-May-24 20:02:17 ALERT run_command_file: Stopping command file processing at line 33! 2010-May-24 20:02:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-May-24 20:02:17 STOP finish_task: Finishing task 'running command file '100524.cmd'' 2010-May-24 20:02:17 LOG5 finish_task: Level: (1) ID = <10153> Status = 0 0 0 1 failed 2010-May-24 20:02:17 ERROR finish_task: ERROR failed running: command file '100524.cmd' 2010-May-24 20:02:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-May-24 20:02:18 END end_task: Finishing task 'running command file '100524.cmd'' with status 'FAILED' 2010-May-24 20:02:18 LOG5 end_task: Level: (1) ID = <10153> Status = 0 0 0 1 failed 2010-May-24 20:03:30 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-May-24 20:03:30 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-May-24 20:03:30 LOG5 restart_wapp: Calling 'restart_wapp' 2010-May-24 20:03:30 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-May-24 20:03:30 LOG5 begin_task: Level: (1) ID = <10175> Status = 0 0 0 0 ok 2010-May-24 20:03:30 NOTE restart_wapp: Restarting all WAPPs 2010-May-24 20:03:30 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-May-24 20:03:30 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-May-24 20:03:30 LOG5 end_task: Level: (1) ID = <10175> Status = 0 0 0 0 ok 2010-May-24 20:03:30 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-May-24 20:03:30 LOG3 exec_msg: Closing socket 2010-May-24 20:03:30 LOG3 exec_msg: Closing socket 2010-May-24 20:03:30 LOG3 exec_msg: Closing socket 2010-May-24 20:03:30 LOG3 exec_msg: Closing socket 2010-May-24 20:03:32 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-May-24 20:03:32 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-May-24 20:03:32 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-May-24 20:03:32 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-May-24 20:03:45 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-May-24 20:03:45 LOG4 exec_msg: From OBSERVER: run_command_file 100524.cmd 33 1 28 2010-May-24 20:03:45 LOG4 run_command_file: Calling 'run_command_file 100524.cmd 33 1 28' 2010-May-24 20:03:45 BEGIN begin_task: Starting task 'running command file '100524.cmd'' 2010-May-24 20:03:45 LOG5 begin_task: Level: (1) ID = <10176> Status = 0 0 0 0 ok 2010-May-24 20:03:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100524.cmd' ...} 2010-May-24 20:03:45 NOTE run_command_file: Starting execution of command file '100524.cmd' from line 33 2010-May-24 20:03:45 COMMAND run_command_line: EXECUTING command 33: 'FIXEDDRIFT az=325.31 alfaangle=48.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p3_001 ra=120900.00 dec=90000.00' 2010-May-24 20:03:45 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-May-24 20:03:45 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-24 20:03:45 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 325.31 48.3 hcorcal 5 tracking no off lcorcal first 1 AGESVC1A_p3_001 120900.00 90000.00 J 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:03:45 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-May-24 20:03:45 LOG5 begin_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2010-May-24 20:03:45 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGESVC1A_p3_001' 2010-May-24 20:03:45 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-May-24 20:03:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p3_001} 2010-May-24 20:03:45 INFO3 fixed_driftmap: Sending telescope to Az = 325.31 and ZA = 11.33 2010-May-24 20:03:45 LOG3 track_source: Calling 'track_source AGESVC1A_p3_001 325.31 11.3316047947 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:03:45 START begin_task: Starting task 'sending tracking commands' 2010-May-24 20:03:45 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2010-May-24 20:03:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p3_001} INFO {Slewing to source 'AGESVC1A_p3_001' ...} 2010-May-24 20:03:45 INFO1 track_source: Starting to track AGESVC1A_p3_001 2010-May-24 20:03:45 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p3_001" 2010-May-24 20:03:45 LOG3 vw_send: To DATATAKING: set ra 325.31 2010-May-24 20:03:45 LOG3 vw_send: To DATATAKING: set dec 11.3316047947 2010-May-24 20:03:45 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-24 20:03:45 LOG3 vw_send: To DATATAKING: pnt tr 325.31 11.3316047947 -CF 2010-May-24 20:03:45 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:03:45 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-24 20:03:45 LOG5 finish_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2010-May-24 20:03:45 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-24 20:03:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:03:45 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-24 20:03:45 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2010-May-24 20:03:45 START begin_task: Starting task 'rotate ALFA to +48.3 degrees' 2010-May-24 20:03:45 LOG5 begin_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2010-May-24 20:03:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +48.3 degrees ...} 2010-May-24 20:03:45 INFO2 rotate_alfa: ALFA commanded to +48.3 degrees 2010-May-24 20:03:45 LOG3 sock_errsend: To ALFAMOTOR: POSITION 48.3 REPLY 2010-May-24 20:03:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-May-24 20:03:45 START begin_task: Starting task 'waiting on ALFA rotation' 2010-May-24 20:03:45 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2010-May-24 20:03:45 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p3_001" 2010-May-24 20:03:45 LOG4 got_cormsg: From DATATAKING: set ra 325.31 2010-May-24 20:03:45 LOG4 got_cormsg: From DATATAKING: set dec 11.3316047947 2010-May-24 20:03:45 LOG4 got_cormsg: From DATATAKING: vw% 325.31 2010-May-24 20:03:45 LOG4 got_cormsg: From DATATAKING: vw% 11.3316047947 2010-May-24 20:03:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:03:45 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-24 20:03:45 LOG4 got_cormsg: From DATATAKING: pnt tr 325.31 11.3316047947 -CF 2010-May-24 20:03:45 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:03:45 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-24 20:03:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:03:46 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-May-24 20:03:46 INFO3 alfa_motor: ALFA rotator in-position +48.30 degrees 2010-May-24 20:03:46 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-May-24 20:03:46 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2010-May-24 20:03:46 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 20:03:46 STOP finish_task: Finishing task 'rotate ALFA to +48.3 degrees' 2010-May-24 20:03:46 LOG5 finish_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2010-May-24 20:03:46 INFO2 finish_task: DONE finished configuration: rotating ALFA to +48.3 degrees 2010-May-24 20:03:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:03:46 STOP end_task: Finishing task 'rotate ALFA to +48.3 degrees' with status 'OK' 2010-May-24 20:03:46 LOG5 end_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2010-May-24 20:03:46 START begin_task: Starting task 'waiting on telescope' 2010-May-24 20:03:46 LOG5 begin_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2010-May-24 20:03:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-24 20:03:46 LOG3 waittrk: Start waittrk 5 2010-May-24 20:03:46 START begin_task: Starting task 'waiting on telescope movement' 2010-May-24 20:03:46 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2010-May-24 20:03:51 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-24 20:03:51 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2010-May-24 20:03:51 START begin_task: Starting task 'waiting on telescope on source' 2010-May-24 20:03:51 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2010-May-24 20:04:07 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-24 20:04:07 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2010-May-24 20:04:07 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 20:04:07 INFO2 waittrk: Now tracking AGESVC1A_p3_001 2010-May-24 20:04:07 LOG4 waittrk: Current telescope position: Az = 324.94 ZA = 11.31 2010-May-24 20:04:07 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-24 20:04:07 LOG5 finish_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2010-May-24 20:04:07 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-24 20:04:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:04:07 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-24 20:04:07 LOG5 end_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2010-May-24 20:04:07 START begin_task: Starting task 'selecting calibration type' 2010-May-24 20:04:07 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-May-24 20:04:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-24 20:04:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-24 20:04:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:04:07 START begin_task: Starting task 'waiting on setcal' 2010-May-24 20:04:07 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2010-May-24 20:04:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-24 20:04:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:04:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:04:07 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 20:04:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-24 20:04:07 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2010-May-24 20:04:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-24 20:04:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 20:04:07 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-24 20:04:07 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 20:04:07 LOG5 begin_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2010-May-24 20:04:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:04:07 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 20:04:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 20:04:07 LOG5 end_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2010-May-24 20:04:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 20:04:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-24 20:04:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 20:04:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-24 20:04:07 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 20:04:07 LOG5 begin_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2010-May-24 20:04:07 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 20:04:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 20:04:07 LOG5 end_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2010-May-24 20:04:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 20:04:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-24 20:04:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-24 20:04:07 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-May-24 20:04:07 LOG5 dopset_later: Calling 'dopset_later 0' 2010-May-24 20:04:07 INFO3 dopset_later: Setting Doppler correction now 2010-May-24 20:04:07 LOG5 antvel: Calling 'antvel 325.310000 11.331605 F Heliocentric 0' 2010-May-24 20:04:07 LOG2 antvel: Transforming current Az = 325.31 ZA = 11.33 to apparent RA = 12:12:59.9 Dec = +08:56:24.8 2010-May-24 20:04:07 LOG2 antvel: Parameters to Doppler: Heliocentric 86647 2010 144 0.0 2010-May-24 20:04:07 INFO5 antvel: Computed antenna velocity: +25.94518 km/s 2010-May-24 20:04:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=25.9451798258 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-May-24 20:04:07 INFO4 dopset_gen: New sky frequencies: 1381.123901 1381.123901 1381.123901 1381.123901 1381.123901 1381.123901 1381.123901 1381.123901 1381.123901 2010-May-24 20:04:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.123901 sky0=1381.123901 sky1=1381.123901 sky2=1381.123901 sky3=1381.123901 sky4=1381.123901 sky5=1381.123901 sky6=1381.123901 sky7=1381.123901 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 20:04:07 LOG2 dopset_gen: Result from 'sky2syn': 1631.123901 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 20:04:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631123901.0} 2010-May-24 20:04:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 20:04:07 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2010-May-24 20:04:07 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2010-May-24 20:04:07 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:12:31.1 Dec = +08:59:52.9 2010-May-24 20:04:07 LOG3 track_source: Calling 'track_source AGESVC1A_p3_001 121231.1 085952.9 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:04:07 START begin_task: Starting task 'sending tracking commands' 2010-May-24 20:04:07 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2010-May-24 20:04:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p3_001} INFO {Slewing to source 'AGESVC1A_p3_001' ...} 2010-May-24 20:04:07 INFO1 track_source: Starting to track AGESVC1A_p3_001 2010-May-24 20:04:07 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p3_001" 2010-May-24 20:04:07 LOG3 vw_send: To DATATAKING: set ra 121231.1 2010-May-24 20:04:07 LOG3 vw_send: To DATATAKING: set dec 085952.9 2010-May-24 20:04:07 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-24 20:04:08 LOG3 vw_send: To DATATAKING: pnt tr 121231.1 085952.9 -CJ 2010-May-24 20:04:08 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:04:08 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-24 20:04:08 LOG5 finish_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2010-May-24 20:04:08 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-24 20:04:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:04:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-24 20:04:08 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2010-May-24 20:04:08 START begin_task: Starting task 'waiting on telescope' 2010-May-24 20:04:08 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2010-May-24 20:04:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-24 20:04:08 LOG3 waittrk: Start waittrk 5 2010-May-24 20:04:08 START begin_task: Starting task 'waiting on telescope movement' 2010-May-24 20:04:08 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2010-May-24 20:04:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631123901.0} 2010-May-24 20:04:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 20:04:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p3_001" 2010-May-24 20:04:08 LOG4 got_cormsg: From DATATAKING: set ra 121231.1 2010-May-24 20:04:08 LOG4 got_cormsg: From DATATAKING: set dec 085952.9 2010-May-24 20:04:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-24 20:04:08 LOG4 got_cormsg: From DATATAKING: vw% 121231.1 2010-May-24 20:04:08 LOG4 got_cormsg: From DATATAKING: vw% 085952.9 2010-May-24 20:04:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:04:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-24 20:04:08 LOG4 got_cormsg: From DATATAKING: pnt tr 121231.1 085952.9 -CJ 2010-May-24 20:04:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:04:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-24 20:04:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:04:13 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-24 20:04:13 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2010-May-24 20:04:13 START begin_task: Starting task 'waiting on telescope on source' 2010-May-24 20:04:13 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2010-May-24 20:04:15 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-24 20:04:15 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2010-May-24 20:04:15 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 20:04:15 INFO2 waittrk: Now tracking AGESVC1A_p3_001 2010-May-24 20:04:15 LOG4 waittrk: Current telescope position: Az = 325.02 ZA = 11.31 2010-May-24 20:04:15 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-24 20:04:15 LOG5 finish_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2010-May-24 20:04:15 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-24 20:04:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:04:15 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-24 20:04:15 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2010-May-24 20:04:15 START begin_task: Starting task 'adjusting WAPP+Mock power' 2010-May-24 20:04:15 LOG5 begin_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2010-May-24 20:04:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2010-May-24 20:04:15 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2010-May-24 20:04:15 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-May-24 20:04:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-May-24 20:04:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:04:15 START begin_task: Starting task 'waiting on adjpwrif2' 2010-May-24 20:04:15 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2010-May-24 20:04:15 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-May-24 20:04:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:04:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:04:15 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 20:04:15 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-May-24 20:04:15 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2010-May-24 20:04:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-May-24 20:04:15 START begin_task: Starting task 'adjusting WAPP power' 2010-May-24 20:04:15 LOG5 begin_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2010-May-24 20:04:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-24 20:04:15 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 20:04:15 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 20:04:15 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 20:04:15 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 20:04:15 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-May-24 20:04:15 LOG5 begin_task: Level: (5) ID = <10195> Status = 0 0 0 0 ok 2010-May-24 20:04:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-May-24 20:04:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:04:16 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-May-24 20:04:16 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 4 3 dB 2010-May-24 20:04:16 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 5 dB 2010-May-24 20:04:16 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-May-24 20:04:16 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-May-24 20:04:16 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-May-24 20:04:16 LOG5 end_task: Level: (5) ID = <10195> Status = 0 0 0 0 ok 2010-May-24 20:04:16 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.947 0.972 ALFA beam 1: 1.046 1.074 2010-May-24 20:04:16 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.993 0.976 ALFA beam 3: 0.939 1.005 2010-May-24 20:04:16 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.915 0.910 ALFA beam 5: 0.950 1.028 2010-May-24 20:04:16 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.911 0.885 ALFA beam 7: 1.001 1.039 2010-May-24 20:04:16 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-24 20:04:16 LOG5 finish_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2010-May-24 20:04:16 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-May-24 20:04:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:04:16 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-24 20:04:16 LOG5 end_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2010-May-24 20:04:16 START begin_task: Starting task 'adjusting Mock spectrometer power' 2010-May-24 20:04:16 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2010-May-24 20:04:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-24 20:04:16 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2010-May-24 20:04:16 LOG3 socket_wait: To MOCK: ADJP30 2010-May-24 20:04:16 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2010-May-24 20:04:16 LOG5 begin_task: Level: (5) ID = <10197> Status = 0 0 0 0 ok 2010-May-24 20:04:24 NOTE from_mock: From MOCK: adjperr pdevs5 sigsReply: 2010-May-24 20:04:24 LOG1 task_failed: Task 'waiting on adjust Mock spectrometer power' failed! 2010-May-24 20:04:24 LOG5 task_failed: Level: (5) ID = <10197> Status = 0 0 0 0 ok 2010-May-24 20:04:24 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'FAILED' 2010-May-24 20:04:24 LOG5 end_task: Level: (5) ID = <10197> Status = 0 0 0 1 failed 2010-May-24 20:04:24 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2010-May-24 20:04:24 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2010-May-24 20:04:24 LOG5 finish_task: Level: (4) ID = <10196> Status = 0 0 0 1 failed 2010-May-24 20:04:24 ERROR finish_task: ERROR failed adjusting: Mock spectrometer power 2010-May-24 20:04:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-May-24 20:04:24 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'FAILED' 2010-May-24 20:04:24 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 1 failed 2010-May-24 20:04:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-24 20:04:24 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2010-May-24 20:04:24 LOG5 finish_task: Level: (3) ID = <10192> Status = 0 0 0 1 failed 2010-May-24 20:04:24 ERROR finish_task: ERROR failed adjusting: WAPP+Mock power levels 2010-May-24 20:04:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-May-24 20:04:24 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'FAILED' 2010-May-24 20:04:24 LOG5 end_task: Level: (3) ID = <10192> Status = 0 0 0 1 failed 2010-May-24 20:04:24 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-May-24 20:04:24 LOG5 finish_task: Level: (2) ID = <10177> Status = 0 0 0 1 failed 2010-May-24 20:04:24 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2010-May-24 20:04:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-May-24 20:04:25 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2010-May-24 20:04:25 LOG5 end_task: Level: (2) ID = <10177> Status = 0 0 0 1 failed 2010-May-24 20:04:25 ALERT run_command_file: Stopping command file processing at line 33! 2010-May-24 20:04:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-May-24 20:04:25 STOP finish_task: Finishing task 'running command file '100524.cmd'' 2010-May-24 20:04:25 LOG5 finish_task: Level: (1) ID = <10176> Status = 0 0 0 1 failed 2010-May-24 20:04:25 ERROR finish_task: ERROR failed running: command file '100524.cmd' 2010-May-24 20:04:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-May-24 20:04:25 END end_task: Finishing task 'running command file '100524.cmd'' with status 'FAILED' 2010-May-24 20:04:25 LOG5 end_task: Level: (1) ID = <10176> Status = 0 0 0 1 failed 2010-May-24 20:04:36 ALERT CIMA-exit_cima: Exiting CIMA ... 2010-May-24 20:04:36 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2010-May-24 20:04:36 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2010-May-24 20:04:36 LOG3 vw_send: To DATATAKING: mvdata a2048 2010-May-24 20:04:36 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2010-May-24 20:04:36 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2010-May-24 20:04:36 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2010-May-24 20:04:36 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2010-May-24 20:04:36 NOTE CIMA-exit_cima: Cleaning up session ... 2010-May-24 20:04:36 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2010-May-24 20:04:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:04:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:06:24 BEGIN executive: CIMA executive starting ... 2010-May-24 20:06:25 NOTE executive: STARTING NEW CIMA SESSION 2010-May-24 20:06:25 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2010-May-24 20:06:25 INFO4 executive: This is an ON-LINE session 2010-May-24 20:06:25 INFO4 executive: This is a REMOTE session 2010-May-24 20:06:25 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2010-May-24 20:06:25 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'RT' 2010-May-24 20:06:25 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20100524' 2010-May-24 20:06:25 LOG2 log_preferences: Currently applied preferences: 2010-May-24 20:06:25 LOG2 log_preferences: prefs(dailylog) = daily 2010-May-24 20:06:25 LOG2 log_preferences: prefs(offlinelog) = skip 2010-May-24 20:06:25 LOG2 log_preferences: prefs(datawindow) = ignore 2010-May-24 20:06:25 LOG2 log_preferences: prefs(limitwarning) = enabled 2010-May-24 20:06:25 LOG2 log_preferences: prefs(wappfailure) = abort 2010-May-24 20:06:25 LOG2 log_preferences: prefs(helpstyle) = stay-open 2010-May-24 20:06:25 LOG2 log_preferences: prefs(logcolours) = full 2010-May-24 20:06:25 LOG2 log_preferences: prefs(displaylevel) = INFO3 2010-May-24 20:06:25 LOG2 log_preferences: prefs(loglevel) = LOG5 2010-May-24 20:06:25 LOG2 log_preferences: prefs(displayformat) = short 2010-May-24 20:06:25 LOG2 log_preferences: prefs(logformat) = new 2010-May-24 20:06:25 LOG2 log_preferences: prefs(fontsize) = 4 2010-May-24 20:06:25 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2010-May-24 20:06:25 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2010-May-24 20:06:25 ALERT executive: CIMA executive ready 2010-May-24 20:06:27 NOTE frontend: CIMA frontend ready 2010-May-24 20:06:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:06:29 LOG4 got_cormsg: From DATATAKING: setup 2010-May-24 20:06:32 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2010-May-24 20:06:32 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2010-May-24 20:06:32 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2010-May-24 20:06:32 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2010-May-24 20:06:32 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-May-24 20:06:32 NOTE select_receiver: Starting to select receiver ALFA 2010-May-24 20:06:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-May-24 20:06:32 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-May-24 20:06:32 LOG3 vw_send: To DATATAKING: acvlbical off 2010-May-24 20:06:32 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-May-24 20:06:33 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-May-24 20:06:33 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-May-24 20:06:33 DONE finish_task: DONE finished selecting: receiver ALFA 2010-May-24 20:06:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-24 20:06:33 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-May-24 20:06:33 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-May-24 20:06:36 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2010-May-24 20:06:36 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2010-May-24 20:06:36 LOG4 got_cormsg: From DATATAKING: vw% io 2010-May-24 20:06:36 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2010-May-24 20:06:36 LOG4 got_cormsg: From DATATAKING: 2010-May-24 20:06:36 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2010-May-24 20:06:36 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2010-May-24 20:06:36 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2010-May-24 20:06:36 LOG4 got_cormsg: From DATATAKING: vw% connectall 2010-May-24 20:06:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2010-May-24 20:06:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2010-May-24 20:06:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2010-May-24 20:06:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2010-May-24 20:06:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2010-May-24 20:06:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2010-May-24 20:06:36 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2010-May-24 20:06:36 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2010-May-24 20:06:36 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2010-May-24 20:06:36 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-May-24 20:06:36 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-May-24 20:06:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:06:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:06:38 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-May-24 20:06:38 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-May-24 20:06:38 LOG5 restart_wapp: Calling 'restart_wapp' 2010-May-24 20:06:38 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-May-24 20:06:38 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-May-24 20:06:38 NOTE restart_wapp: Restarting all WAPPs 2010-May-24 20:06:38 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-May-24 20:06:38 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-May-24 20:06:39 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-May-24 20:06:39 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-May-24 20:06:41 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-May-24 20:06:41 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-May-24 20:06:41 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-May-24 20:06:41 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-May-24 20:06:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:06:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:17 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima31.cmd' (at lines 1 - 24) 2010-May-24 20:07:17 INFO4 CIMA-load_command_file: Loaded command file '100524.cmd' 2010-May-24 20:07:34 INFO1 CIMA-run_command_file: Transferring command file '100524.cmd' to executive ... 2010-May-24 20:07:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima31.conf} 2010-May-24 20:07:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2010-May-24 20:07:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2010-May-24 20:07:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2010-May-24 20:07:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2010-May-24 20:07:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2010-May-24 20:07:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2010-May-24 20:07:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2010-May-24 20:07:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2010-May-24 20:07:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2010-May-24 20:07:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2010-May-24 20:07:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2010-May-24 20:07:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2010-May-24 20:07:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 27 {LOAD ages_mock.conf} 2010-May-24 20:07:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 28 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2010-May-24 20:07:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 29 {CATALOG AGESFull.cat} 2010-May-24 20:07:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 32 {IF LSTSLEW(AGESVC1A_p3_001) < 114333 THEN} 2010-May-24 20:07:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 33 {FIXEDDRIFT az=325.31 alfaangle=48.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p3_001 ra=120900.00 dec=90000.00} 2010-May-24 20:07:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 36 {ENDIF} 2010-May-24 20:07:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 39 {IF LSTSLEW(AGESVC1B_p2_038) < 120632 THEN} 2010-May-24 20:07:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 40 {FIXEDDRIFT az=330.85 alfaangle=43.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_038 ra=122900.00 dec=80430.00} 2010-May-24 20:07:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 43 {ENDIF} 2010-May-24 20:07:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 46 {IF LSTSLEW(AGESVC1B_p2_040) < 122932 THEN} 2010-May-24 20:07:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 47 {FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_040 ra=122900.00 dec=80130.00} 2010-May-24 20:07:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 50 {ENDIF} 2010-May-24 20:07:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 53 {IF LSTSLEW(AGESVC1B_p3_001) < 125232 THEN} 2010-May-24 20:07:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 54 {FIXEDDRIFT az=31.42 alfaangle=-7.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_001 ra=122900.00 dec=90000.00} 2010-May-24 20:07:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 57 {ENDIF} 2010-May-24 20:07:35 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-May-24 20:07:35 LOG4 exec_msg: From OBSERVER: run_command_file 100524.cmd 27 1 28 2010-May-24 20:07:35 LOG4 run_command_file: Calling 'run_command_file 100524.cmd 27 1 28' 2010-May-24 20:07:35 BEGIN begin_task: Starting task 'running command file '100524.cmd'' 2010-May-24 20:07:35 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-May-24 20:07:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100524.cmd' ...} 2010-May-24 20:07:35 NOTE run_command_file: Starting execution of command file '100524.cmd' from line 27 2010-May-24 20:07:35 COMMAND run_command_line: EXECUTING command 27: 'LOAD ages_mock.conf' 2010-May-24 20:07:35 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-May-24 20:07:35 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-24 20:07:35 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-May-24 20:07:35 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2010-May-24 20:07:35 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2010-May-24 20:07:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-May-24 20:07:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-May-24 20:07:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2010-May-24 20:07:37 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2010-May-24 20:07:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2010-May-24 20:07:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2010-May-24 20:07:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2010-May-24 20:07:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2010-May-24 20:07:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2010-May-24 20:07:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2010-May-24 20:07:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2010-May-24 20:07:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2010-May-24 20:07:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2010-May-24 20:07:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2010-May-24 20:07:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2010-May-24 20:07:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2010-May-24 20:07:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2010-May-24 20:07:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2010-May-24 20:07:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2010-May-24 20:07:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2010-May-24 20:07:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2010-May-24 20:07:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2010-May-24 20:07:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2010-May-24 20:07:38 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-24 20:07:38 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-May-24 20:07:38 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-May-24 20:07:38 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-May-24 20:07:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-May-24 20:07:38 INFO1 config_iflo: Selecting receiver ALFA 2010-May-24 20:07:38 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2010-May-24 20:07:38 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2010-May-24 20:07:38 START begin_task: Starting task 'selecting receiver ALFA' 2010-May-24 20:07:38 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-May-24 20:07:38 NOTE select_receiver: Starting to select receiver ALFA 2010-May-24 20:07:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-May-24 20:07:38 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-May-24 20:07:38 LOG3 vw_send: To DATATAKING: acvlbical off 2010-May-24 20:07:38 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-May-24 20:07:38 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-May-24 20:07:38 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-May-24 20:07:38 INFO2 finish_task: DONE finished selecting: receiver ALFA 2010-May-24 20:07:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:07:38 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-May-24 20:07:38 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-May-24 20:07:38 START begin_task: Starting task 'waiting for receiver ALFA' 2010-May-24 20:07:38 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-May-24 20:07:38 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2010-May-24 20:07:38 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-May-24 20:07:38 INFO1 config_iflo: Configuring rest of the IF/LO path 2010-May-24 20:07:38 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2010-May-24 20:07:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 20:07:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-24 20:07:38 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 20:07:38 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-May-24 20:07:38 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 20:07:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 20:07:38 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-May-24 20:07:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 20:07:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-24 20:07:38 LOG3 vw_send: To DATATAKING: alfafb 1 2010-May-24 20:07:38 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2010-May-24 20:07:38 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-May-24 20:07:38 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-May-24 20:07:38 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2010-May-24 20:07:38 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2010-May-24 20:07:38 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2010-May-24 20:07:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2010-May-24 20:07:38 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2010-May-24 20:07:38 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2010-May-24 20:07:38 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-May-24 20:07:38 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-May-24 20:07:38 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-May-24 20:07:38 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-May-24 20:07:38 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-May-24 20:07:38 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2010-May-24 20:07:38 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2010-May-24 20:07:39 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2010-May-24 20:07:39 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2010-May-24 20:07:39 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-May-24 20:07:39 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2010-May-24 20:07:39 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-May-24 20:07:39 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-May-24 20:07:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 20:07:39 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-May-24 20:07:39 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2010-May-24 20:07:39 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-May-24 20:07:39 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2010-May-24 20:07:39 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2010-May-24 20:07:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-May-24 20:07:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:07:39 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-May-24 20:07:39 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-May-24 20:07:39 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-May-24 20:07:39 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-May-24 20:07:39 LOG4 got_cormsg: From DATATAKING: alfafb 1 2010-May-24 20:07:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2010-May-24 20:07:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2010-May-24 20:07:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2010-May-24 20:07:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2010-May-24 20:07:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2010-May-24 20:07:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2010-May-24 20:07:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2010-May-24 20:07:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2010-May-24 20:07:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2010-May-24 20:07:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2010-May-24 20:07:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2010-May-24 20:07:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-May-24 20:07:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2010-May-24 20:07:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-May-24 20:07:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 20:07:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-May-24 20:07:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2010-May-24 20:07:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2010-May-24 20:07:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2010-May-24 20:07:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:07:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:54 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 20:07:54 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-May-24 20:07:54 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-May-24 20:07:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-May-24 20:07:54 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-May-24 20:07:54 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-May-24 20:07:54 DONE finish_task: DONE finished configuration: IF/LO path 2010-May-24 20:07:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-24 20:07:55 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-May-24 20:07:55 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-May-24 20:07:55 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-May-24 20:07:55 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-May-24 20:07:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-May-24 20:07:55 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-May-24 20:07:55 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-May-24 20:07:55 START begin_task: Starting task 'selecting calibration port' 2010-May-24 20:07:55 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-May-24 20:07:55 LOG3 vw_send: To DATATAKING: calport 3 2010-May-24 20:07:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-May-24 20:07:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:07:55 START begin_task: Starting task 'waiting on calport' 2010-May-24 20:07:55 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2010-May-24 20:07:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:55 LOG4 got_cormsg: From DATATAKING: calport 3 2010-May-24 20:07:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:07:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:55 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 20:07:55 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-May-24 20:07:55 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2010-May-24 20:07:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-May-24 20:07:55 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-May-24 20:07:55 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-May-24 20:07:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-24 20:07:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-24 20:07:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 20:07:55 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-May-24 20:07:55 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 20:07:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-24 20:07:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 20:07:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 20:07:55 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-May-24 20:07:55 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-May-24 20:07:55 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-May-24 20:07:55 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-May-24 20:07:55 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-May-24 20:07:55 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-May-24 20:07:55 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-May-24 20:07:55 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-May-24 20:07:55 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-May-24 20:07:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-24 20:07:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-24 20:07:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-24 20:07:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-24 20:07:55 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-May-24 20:07:55 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-May-24 20:07:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 20:07:55 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-May-24 20:07:55 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 20:07:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-24 20:07:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 20:07:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 20:07:55 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-May-24 20:07:56 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-24 20:07:56 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-24 20:07:56 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-24 20:07:56 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-24 20:07:56 STOP finish_task: Finishing task 'configuring WAPPs' 2010-May-24 20:07:56 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-May-24 20:07:56 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-May-24 20:07:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-24 20:07:56 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-May-24 20:07:56 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-May-24 20:07:56 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2010-May-24 20:07:56 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-May-24 20:07:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2010-May-24 20:07:56 INFO1 config_mock: Starting to configure the Mock spectrometer 2010-May-24 20:07:56 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-May-24 20:07:56 START begin_task: Starting task 'selecting calibration port' 2010-May-24 20:07:56 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-May-24 20:07:56 LOG3 vw_send: To DATATAKING: calport 3 2010-May-24 20:07:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-May-24 20:07:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:07:56 START begin_task: Starting task 'waiting on calport' 2010-May-24 20:07:56 LOG5 begin_task: Level: (4) ID = <10016> Status = 0 0 0 0 ok 2010-May-24 20:07:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-24 20:07:56 LOG4 got_cormsg: From DATATAKING: calport 3 2010-May-24 20:07:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-May-24 20:07:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-May-24 20:07:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:07:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:56 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 20:07:56 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-May-24 20:07:56 LOG5 end_task: Level: (4) ID = <10016> Status = 0 0 0 0 ok 2010-May-24 20:07:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-May-24 20:07:56 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-May-24 20:07:56 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-May-24 20:07:56 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-24 20:07:56 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-24 20:07:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 20:07:56 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2010-May-24 20:07:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:07:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-24 20:07:56 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 20:07:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-24 20:07:56 NOTE WAPPDATA-new_file: New FITS file: wapp.20100524.a2048.0001.fits 2010-May-24 20:07:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 20:07:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 20:07:56 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2010-May-24 20:07:56 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-May-24 20:07:56 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-May-24 20:07:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 20:07:56 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2010-May-24 20:07:56 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20100524.a2048.0001.fits} 2010-May-24 20:07:57 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 20:07:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-24 20:07:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 20:07:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 20:07:57 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2010-May-24 20:07:57 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2010-May-24 20:07:57 LOG3 socket_wait: To MOCK: NOP 2010-May-24 20:07:57 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2010-May-24 20:07:57 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2010-May-24 20:07:57 ALERT got_mock_message: Mock spectrometer restarting 2010-May-24 20:07:57 LOG4 from_mock: From MOCK: nop ok 2010-May-24 20:07:57 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2010-May-24 20:07:57 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2010-May-24 20:07:57 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2010-May-24 20:07:57 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2010-May-24 20:07:57 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2010-May-24 20:07:57 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2010-May-24 20:07:57 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2010-May-24 20:07:57 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2010-May-24 20:07:57 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2010-May-24 20:07:57 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2010-May-24 20:07:57 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2010-May-24 20:07:57 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2010-May-24 20:07:57 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2010-May-24 20:07:57 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2010-May-24 20:07:57 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2010-May-24 20:07:57 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2010-May-24 20:07:57 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2010-May-24 20:07:57 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2010-May-24 20:07:57 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2010-May-24 20:07:57 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2010-May-24 20:07:57 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2010-May-24 20:07:57 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2010-May-24 20:07:57 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2010-May-24 20:07:57 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2010-May-24 20:07:57 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-May-24 20:07:59 LOG4 from_mock: From MOCK: confok 2010-May-24 20:07:59 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2010-May-24 20:07:59 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-May-24 20:07:59 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2010-May-24 20:07:59 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2010-May-24 20:07:59 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2010-May-24 20:07:59 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2010-May-24 20:07:59 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-May-24 20:07:59 LOG4 from_mock: From MOCK: confok 2010-May-24 20:07:59 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2010-May-24 20:07:59 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-May-24 20:07:59 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2010-May-24 20:07:59 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2010-May-24 20:07:59 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-May-24 20:07:59 DONE finish_task: DONE finished configuring: the Mock spectrometer 2010-May-24 20:07:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-24 20:07:59 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2010-May-24 20:08:00 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-May-24 20:08:00 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2010-May-24 20:08:00 COMMAND run_command_line: EXECUTING command 28: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2010-May-24 20:08:00 COMMAND run_command_line: EXECUTING command 29: 'CATALOG AGESFull.cat' 2010-May-24 20:08:00 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2010-May-24 20:08:00 COMMAND run_command_line: EXECUTING command 32: 'IF LSTSLEW(AGESVC1A_p3_001) < 114333 THEN' 2010-May-24 20:08:00 LOG3 is_if_valid: Current source data: up 333.7 10.4 UP - - 90 0.3 2010-May-24 20:08:00 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1A_p3_001) < 114333 2010-May-24 20:08:00 INFO5 is_if_valid: Condition parsed as: 11.852939000000001 < 11.725833333333334 2010-May-24 20:08:00 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGESVC1A_p3_001) < 114333 THEN' 2010-May-24 20:08:00 COMMAND run_command_line: EXECUTING command 33: 'FIXEDDRIFT az=325.31 alfaangle=48.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p3_001 ra=120900.00 dec=90000.00' 2010-May-24 20:08:00 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=325.31 alfaangle=48.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p3_001 ra=120900.00 dec=90000.00' in non-true conditional branch 2010-May-24 20:08:00 COMMAND run_command_line: EXECUTING command 36: 'ENDIF' 2010-May-24 20:08:00 COMMAND run_command_line: EXECUTING command 39: 'IF LSTSLEW(AGESVC1B_p2_038) < 120632 THEN' 2010-May-24 20:08:01 LOG3 is_if_valid: Current source data: up 316.5 14.0 UP - - 107 1.2 2010-May-24 20:08:01 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1B_p2_038) < 120632 2010-May-24 20:08:01 INFO5 is_if_valid: Condition parsed as: 11.867939 < 12.108888888888888 2010-May-24 20:08:01 COMMAND run_command_line: EXECUTING command 40: 'FIXEDDRIFT az=330.85 alfaangle=43.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_038 ra=122900.00 dec=80430.00' 2010-May-24 20:08:01 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-May-24 20:08:05 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-24 20:08:05 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 330.85 43.4 hcorcal 5 tracking no off lcorcal first 1 AGESVC1B_p2_038 122900.00 80430.00 J 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:08:05 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-May-24 20:08:05 LOG5 begin_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2010-May-24 20:08:05 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGESVC1A_p3_001' 2010-May-24 20:08:05 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-May-24 20:08:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p2_038} 2010-May-24 20:08:05 INFO3 fixed_driftmap: Sending telescope to Az = 330.85 and ZA = 11.75 2010-May-24 20:08:05 LOG3 track_source: Calling 'track_source AGESVC1B_p2_038 330.85 11.7527307052 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:08:05 START begin_task: Starting task 'sending tracking commands' 2010-May-24 20:08:05 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2010-May-24 20:08:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_038} INFO {Slewing to source 'AGESVC1B_p2_038' ...} 2010-May-24 20:08:05 INFO1 track_source: Starting to track AGESVC1B_p2_038 2010-May-24 20:08:05 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_038" 2010-May-24 20:08:05 LOG3 vw_send: To DATATAKING: set ra 330.85 2010-May-24 20:08:05 LOG3 vw_send: To DATATAKING: set dec 11.7527307052 2010-May-24 20:08:05 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-24 20:08:05 LOG3 vw_send: To DATATAKING: pnt tr 330.85 11.7527307052 -CF 2010-May-24 20:08:05 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:08:05 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-24 20:08:05 LOG5 finish_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2010-May-24 20:08:05 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-24 20:08:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:08:05 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-24 20:08:05 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2010-May-24 20:08:05 START begin_task: Starting task 'rotate ALFA to +43.4 degrees' 2010-May-24 20:08:05 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2010-May-24 20:08:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +43.4 degrees ...} 2010-May-24 20:08:05 INFO2 rotate_alfa: ALFA commanded to +43.4 degrees 2010-May-24 20:08:05 LOG3 sock_errsend: To ALFAMOTOR: POSITION 43.4 REPLY 2010-May-24 20:08:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-May-24 20:08:05 START begin_task: Starting task 'waiting on ALFA rotation' 2010-May-24 20:08:05 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2010-May-24 20:08:05 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_038" 2010-May-24 20:08:05 LOG4 got_cormsg: From DATATAKING: set ra 330.85 2010-May-24 20:08:05 LOG4 got_cormsg: From DATATAKING: set dec 11.7527307052 2010-May-24 20:08:05 LOG4 got_cormsg: From DATATAKING: vw% 330.85 2010-May-24 20:08:05 LOG4 got_cormsg: From DATATAKING: vw% 11.7527307052 2010-May-24 20:08:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:08:05 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-24 20:08:05 LOG4 got_cormsg: From DATATAKING: pnt tr 330.85 11.7527307052 -CF 2010-May-24 20:08:05 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:08:05 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-24 20:08:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:08:08 COMMAND CIMA-send_to_exec: Sending command to abort observation 2010-May-24 20:08:08 LOG4 exec_msg: From OBSERVER: abort_task abort 2010-May-24 20:08:08 WARNING abort_task: WARNING abort requested! 2010-May-24 20:08:08 WARNING abort_task: WARNING Aborting wait for waiting on ALFA rotation 2010-May-24 20:08:08 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'ABORT' 2010-May-24 20:08:08 LOG5 end_task: Level: (4) ID = <10025> Status = 1 0 0 0 abort 2010-May-24 20:08:08 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 20:08:08 ALERT rotate_alfa: Current ALFA angle is +45.64 degrees! 2010-May-24 20:08:08 STOP finish_task: Finishing task 'rotate ALFA to +43.4 degrees' 2010-May-24 20:08:08 LOG5 finish_task: Level: (3) ID = <10024> Status = 1 0 0 0 abort 2010-May-24 20:08:08 WARNING finish_task: WARNING aborted configuration: rotating ALFA to +43.4 degrees 2010-May-24 20:08:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Aborted 2010-May-24 20:08:08 STOP end_task: Finishing task 'rotate ALFA to +43.4 degrees' with status 'ABORT' 2010-May-24 20:08:08 LOG5 end_task: Level: (3) ID = <10024> Status = 1 0 0 0 abort 2010-May-24 20:08:08 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-May-24 20:08:08 LOG5 finish_task: Level: (2) ID = <10022> Status = 1 0 0 0 abort 2010-May-24 20:08:08 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2010-May-24 20:08:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2010-May-24 20:08:08 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2010-May-24 20:08:08 LOG5 end_task: Level: (2) ID = <10022> Status = 1 0 0 0 abort 2010-May-24 20:08:08 ALERT run_command_file: Stopping command file processing at line 40! 2010-May-24 20:08:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-May-24 20:08:08 STOP finish_task: Finishing task 'running command file '100524.cmd'' 2010-May-24 20:08:08 LOG5 finish_task: Level: (1) ID = <10003> Status = 1 0 0 0 abort 2010-May-24 20:08:08 WARNING finish_task: WARNING aborted running: command file '100524.cmd' 2010-May-24 20:08:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2010-May-24 20:08:08 END end_task: Finishing task 'running command file '100524.cmd'' with status 'ABORT' 2010-May-24 20:08:08 LOG5 end_task: Level: (1) ID = <10003> Status = 1 0 0 0 abort 2010-May-24 20:08:09 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-May-24 20:08:09 INFO3 alfa_motor: ALFA rotator in-position +43.40 degrees 2010-May-24 20:08:17 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-May-24 20:08:17 LOG4 exec_msg: From OBSERVER: run_command_file 100524.cmd 33 1 28 2010-May-24 20:08:17 LOG4 run_command_file: Calling 'run_command_file 100524.cmd 33 1 28' 2010-May-24 20:08:17 BEGIN begin_task: Starting task 'running command file '100524.cmd'' 2010-May-24 20:08:17 LOG5 begin_task: Level: (1) ID = <10026> Status = 0 0 0 0 ok 2010-May-24 20:08:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100524.cmd' ...} 2010-May-24 20:08:17 NOTE run_command_file: Starting execution of command file '100524.cmd' from line 33 2010-May-24 20:08:17 COMMAND run_command_line: EXECUTING command 33: 'FIXEDDRIFT az=325.31 alfaangle=48.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p3_001 ra=120900.00 dec=90000.00' 2010-May-24 20:08:17 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-May-24 20:08:17 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-24 20:08:17 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 325.31 48.3 hcorcal 5 tracking no off lcorcal first 1 AGESVC1A_p3_001 120900.00 90000.00 J 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:08:17 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-May-24 20:08:17 LOG5 begin_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2010-May-24 20:08:17 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGESVC1B_p2_038' 2010-May-24 20:08:17 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-May-24 20:08:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p3_001} 2010-May-24 20:08:17 INFO3 fixed_driftmap: Sending telescope to Az = 325.31 and ZA = 11.33 2010-May-24 20:08:17 LOG3 track_source: Calling 'track_source AGESVC1A_p3_001 325.31 11.3316047062 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:08:17 START begin_task: Starting task 'sending tracking commands' 2010-May-24 20:08:17 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-May-24 20:08:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p3_001} INFO {Slewing to source 'AGESVC1A_p3_001' ...} 2010-May-24 20:08:17 INFO1 track_source: Starting to track AGESVC1A_p3_001 2010-May-24 20:08:17 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p3_001" 2010-May-24 20:08:17 LOG3 vw_send: To DATATAKING: set ra 325.31 2010-May-24 20:08:17 LOG3 vw_send: To DATATAKING: set dec 11.3316047062 2010-May-24 20:08:18 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-24 20:08:18 LOG3 vw_send: To DATATAKING: pnt tr 325.31 11.3316047062 -CF 2010-May-24 20:08:18 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:08:18 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-24 20:08:18 LOG5 finish_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-May-24 20:08:18 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-24 20:08:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:08:18 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-24 20:08:18 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-May-24 20:08:18 START begin_task: Starting task 'rotate ALFA to +48.3 degrees' 2010-May-24 20:08:18 LOG5 begin_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2010-May-24 20:08:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +48.3 degrees ...} 2010-May-24 20:08:18 INFO2 rotate_alfa: ALFA commanded to +48.3 degrees 2010-May-24 20:08:18 LOG3 sock_errsend: To ALFAMOTOR: POSITION 48.3 REPLY 2010-May-24 20:08:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-May-24 20:08:18 START begin_task: Starting task 'waiting on ALFA rotation' 2010-May-24 20:08:18 LOG5 begin_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2010-May-24 20:08:18 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p3_001" 2010-May-24 20:08:18 LOG4 got_cormsg: From DATATAKING: set ra 325.31 2010-May-24 20:08:18 LOG4 got_cormsg: From DATATAKING: set dec 11.3316047062 2010-May-24 20:08:18 LOG4 got_cormsg: From DATATAKING: vw% 325.31 2010-May-24 20:08:18 LOG4 got_cormsg: From DATATAKING: vw% 11.3316047062 2010-May-24 20:08:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:08:18 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-24 20:08:18 LOG4 got_cormsg: From DATATAKING: pnt tr 325.31 11.3316047062 -CF 2010-May-24 20:08:18 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:08:18 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-24 20:08:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:08:22 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-May-24 20:08:22 INFO3 alfa_motor: ALFA rotator in-position +48.30 degrees 2010-May-24 20:08:22 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-May-24 20:08:22 LOG5 end_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2010-May-24 20:08:22 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 20:08:22 STOP finish_task: Finishing task 'rotate ALFA to +48.3 degrees' 2010-May-24 20:08:22 LOG5 finish_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2010-May-24 20:08:22 INFO2 finish_task: DONE finished configuration: rotating ALFA to +48.3 degrees 2010-May-24 20:08:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:08:22 STOP end_task: Finishing task 'rotate ALFA to +48.3 degrees' with status 'OK' 2010-May-24 20:08:22 LOG5 end_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2010-May-24 20:08:22 START begin_task: Starting task 'waiting on telescope' 2010-May-24 20:08:22 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2010-May-24 20:08:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-24 20:08:22 LOG3 waittrk: Start waittrk 5 2010-May-24 20:08:22 START begin_task: Starting task 'waiting on telescope movement' 2010-May-24 20:08:22 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2010-May-24 20:08:27 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-24 20:08:27 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2010-May-24 20:08:27 START begin_task: Starting task 'waiting on telescope on source' 2010-May-24 20:08:27 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2010-May-24 20:08:51 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-24 20:08:51 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2010-May-24 20:08:51 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 20:08:51 INFO2 waittrk: Now tracking AGESVC1A_p3_001 2010-May-24 20:08:51 LOG4 waittrk: Current telescope position: Az = 324.94 ZA = 11.31 2010-May-24 20:08:51 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-24 20:08:51 LOG5 finish_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2010-May-24 20:08:51 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-24 20:08:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:08:51 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-24 20:08:51 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2010-May-24 20:08:51 START begin_task: Starting task 'selecting calibration type' 2010-May-24 20:08:51 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2010-May-24 20:08:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-24 20:08:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-24 20:08:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:08:51 START begin_task: Starting task 'waiting on setcal' 2010-May-24 20:08:51 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2010-May-24 20:08:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-24 20:08:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:08:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:08:51 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 20:08:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-24 20:08:51 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2010-May-24 20:08:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-24 20:08:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 20:08:51 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-24 20:08:51 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 20:08:51 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2010-May-24 20:08:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:08:51 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 20:08:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 20:08:51 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2010-May-24 20:08:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 20:08:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-24 20:08:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 20:08:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-24 20:08:51 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 20:08:51 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-May-24 20:08:51 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 20:08:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 20:08:51 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-May-24 20:08:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 20:08:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-24 20:08:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-24 20:08:51 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2010-May-24 20:08:51 LOG5 dopset_later: Calling 'dopset_later 0' 2010-May-24 20:08:51 INFO3 dopset_later: Setting Doppler correction now 2010-May-24 20:08:51 LOG5 antvel: Calling 'antvel 325.310000 11.331605 F Heliocentric 0' 2010-May-24 20:08:51 LOG2 antvel: Transforming current Az = 325.31 ZA = 11.33 to apparent RA = 12:17:44.7 Dec = +08:56:24.8 2010-May-24 20:08:51 LOG2 antvel: Parameters to Doppler: Heliocentric 86931 2010 144 0.0 2010-May-24 20:08:51 INFO5 antvel: Computed antenna velocity: +25.66092 km/s 2010-May-24 20:08:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=25.660917333899999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-May-24 20:08:51 INFO4 dopset_gen: New sky frequencies: 1381.125210 1381.125210 1381.125210 1381.125210 1381.125210 1381.125210 1381.125210 1381.125210 1381.125210 2010-May-24 20:08:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.125210 sky0=1381.125210 sky1=1381.125210 sky2=1381.125210 sky3=1381.125210 sky4=1381.125210 sky5=1381.125210 sky6=1381.125210 sky7=1381.125210 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 20:08:51 LOG2 dopset_gen: Result from 'sky2syn': 1631.125210 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 20:08:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631125210.0} 2010-May-24 20:08:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 20:08:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2010-May-24 20:08:51 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2010-May-24 20:08:51 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:17:15.9 Dec = +08:59:52.6 2010-May-24 20:08:51 LOG3 track_source: Calling 'track_source AGESVC1A_p3_001 121715.9 085952.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:08:51 START begin_task: Starting task 'sending tracking commands' 2010-May-24 20:08:51 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2010-May-24 20:08:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p3_001} INFO {Slewing to source 'AGESVC1A_p3_001' ...} 2010-May-24 20:08:52 INFO1 track_source: Starting to track AGESVC1A_p3_001 2010-May-24 20:08:52 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p3_001" 2010-May-24 20:08:52 LOG3 vw_send: To DATATAKING: set ra 121715.9 2010-May-24 20:08:52 LOG3 vw_send: To DATATAKING: set dec 085952.6 2010-May-24 20:08:52 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-24 20:08:52 LOG3 vw_send: To DATATAKING: pnt tr 121715.9 085952.6 -CJ 2010-May-24 20:08:52 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:08:52 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-24 20:08:52 LOG5 finish_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2010-May-24 20:08:52 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-24 20:08:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:08:52 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-24 20:08:52 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2010-May-24 20:08:52 START begin_task: Starting task 'waiting on telescope' 2010-May-24 20:08:52 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-May-24 20:08:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-24 20:08:52 LOG3 waittrk: Start waittrk 5 2010-May-24 20:08:52 START begin_task: Starting task 'waiting on telescope movement' 2010-May-24 20:08:52 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2010-May-24 20:08:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631125210.0} 2010-May-24 20:08:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 20:08:52 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p3_001" 2010-May-24 20:08:52 LOG4 got_cormsg: From DATATAKING: set ra 121715.9 2010-May-24 20:08:52 LOG4 got_cormsg: From DATATAKING: set dec 085952.6 2010-May-24 20:08:52 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-24 20:08:52 LOG4 got_cormsg: From DATATAKING: vw% 121715.9 2010-May-24 20:08:52 LOG4 got_cormsg: From DATATAKING: vw% 085952.6 2010-May-24 20:08:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:08:52 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-24 20:08:52 LOG4 got_cormsg: From DATATAKING: pnt tr 121715.9 085952.6 -CJ 2010-May-24 20:08:52 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:08:52 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-24 20:08:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:08:57 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-24 20:08:57 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2010-May-24 20:08:57 START begin_task: Starting task 'waiting on telescope on source' 2010-May-24 20:08:57 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2010-May-24 20:08:59 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-24 20:08:59 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2010-May-24 20:08:59 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 20:08:59 INFO2 waittrk: Now tracking AGESVC1A_p3_001 2010-May-24 20:08:59 LOG4 waittrk: Current telescope position: Az = 325.02 ZA = 11.31 2010-May-24 20:08:59 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-24 20:08:59 LOG5 finish_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-May-24 20:08:59 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-24 20:08:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:08:59 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-24 20:08:59 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-May-24 20:08:59 START begin_task: Starting task 'adjusting WAPP+Mock power' 2010-May-24 20:08:59 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2010-May-24 20:08:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2010-May-24 20:08:59 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2010-May-24 20:08:59 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-May-24 20:08:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-May-24 20:08:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:08:59 START begin_task: Starting task 'waiting on adjpwrif2' 2010-May-24 20:08:59 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2010-May-24 20:08:59 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-May-24 20:08:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:09:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:09:02 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 20:09:02 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-May-24 20:09:02 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2010-May-24 20:09:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-May-24 20:09:02 START begin_task: Starting task 'adjusting WAPP power' 2010-May-24 20:09:02 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2010-May-24 20:09:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-24 20:09:02 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 20:09:02 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 20:09:02 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 20:09:02 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 20:09:02 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-May-24 20:09:02 LOG5 begin_task: Level: (5) ID = <10045> Status = 0 0 0 0 ok 2010-May-24 20:09:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-May-24 20:09:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:09:03 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-May-24 20:09:03 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 5 dB 2010-May-24 20:09:03 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 4 3 dB 2010-May-24 20:09:03 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-May-24 20:09:03 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-May-24 20:09:03 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-May-24 20:09:03 LOG5 end_task: Level: (5) ID = <10045> Status = 0 0 0 0 ok 2010-May-24 20:09:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.947 0.967 ALFA beam 1: 1.045 1.074 2010-May-24 20:09:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.995 0.977 ALFA beam 3: 0.938 1.006 2010-May-24 20:09:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.914 0.908 ALFA beam 5: 0.951 1.027 2010-May-24 20:09:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.913 0.886 ALFA beam 7: 1.002 1.043 2010-May-24 20:09:03 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-24 20:09:03 LOG5 finish_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2010-May-24 20:09:03 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-May-24 20:09:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:09:03 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-24 20:09:03 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2010-May-24 20:09:03 START begin_task: Starting task 'adjusting Mock spectrometer power' 2010-May-24 20:09:03 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2010-May-24 20:09:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-24 20:09:03 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2010-May-24 20:09:03 LOG3 socket_wait: To MOCK: ADJP30 2010-May-24 20:09:03 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2010-May-24 20:09:03 LOG5 begin_task: Level: (5) ID = <10047> Status = 0 0 0 0 ok 2010-May-24 20:09:11 NOTE from_mock: From MOCK: adjperr pdevs5 sigsReply: 2010-May-24 20:09:11 LOG1 task_failed: Task 'waiting on adjust Mock spectrometer power' failed! 2010-May-24 20:09:11 LOG5 task_failed: Level: (5) ID = <10047> Status = 0 0 0 0 ok 2010-May-24 20:09:11 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'FAILED' 2010-May-24 20:09:11 LOG5 end_task: Level: (5) ID = <10047> Status = 0 0 0 1 failed 2010-May-24 20:09:11 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2010-May-24 20:09:11 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2010-May-24 20:09:11 LOG5 finish_task: Level: (4) ID = <10046> Status = 0 0 0 1 failed 2010-May-24 20:09:11 ERROR finish_task: ERROR failed adjusting: Mock spectrometer power 2010-May-24 20:09:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-May-24 20:09:11 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'FAILED' 2010-May-24 20:09:11 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 1 failed 2010-May-24 20:09:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-24 20:09:11 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2010-May-24 20:09:11 LOG5 finish_task: Level: (3) ID = <10042> Status = 0 0 0 1 failed 2010-May-24 20:09:11 ERROR finish_task: ERROR failed adjusting: WAPP+Mock power levels 2010-May-24 20:09:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-May-24 20:09:11 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'FAILED' 2010-May-24 20:09:11 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 1 failed 2010-May-24 20:09:11 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-May-24 20:09:11 LOG5 finish_task: Level: (2) ID = <10027> Status = 0 0 0 1 failed 2010-May-24 20:09:11 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2010-May-24 20:09:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-May-24 20:09:11 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2010-May-24 20:09:11 LOG5 end_task: Level: (2) ID = <10027> Status = 0 0 0 1 failed 2010-May-24 20:09:11 ALERT run_command_file: Stopping command file processing at line 33! 2010-May-24 20:09:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-May-24 20:09:11 STOP finish_task: Finishing task 'running command file '100524.cmd'' 2010-May-24 20:09:11 LOG5 finish_task: Level: (1) ID = <10026> Status = 0 0 0 1 failed 2010-May-24 20:09:11 ERROR finish_task: ERROR failed running: command file '100524.cmd' 2010-May-24 20:09:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-May-24 20:09:11 END end_task: Finishing task 'running command file '100524.cmd'' with status 'FAILED' 2010-May-24 20:09:11 LOG5 end_task: Level: (1) ID = <10026> Status = 0 0 0 1 failed 2010-May-24 20:16:40 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 20:16:40.313 (seconds: 73000.313)!} 2010-May-24 20:16:40 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 20:16:40.313 (seconds: 73000.313)! 2010-May-24 20:24:43 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-May-24 20:24:43 LOG4 exec_msg: From OBSERVER: run_command_file 100524.cmd 27 1 28 2010-May-24 20:24:43 LOG4 run_command_file: Calling 'run_command_file 100524.cmd 27 1 28' 2010-May-24 20:24:43 BEGIN begin_task: Starting task 'running command file '100524.cmd'' 2010-May-24 20:24:43 LOG5 begin_task: Level: (1) ID = <10048> Status = 0 0 0 0 ok 2010-May-24 20:24:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100524.cmd' ...} 2010-May-24 20:24:43 NOTE run_command_file: Starting execution of command file '100524.cmd' from line 27 2010-May-24 20:24:43 COMMAND run_command_line: EXECUTING command 27: 'LOAD ages_mock.conf' 2010-May-24 20:24:43 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-May-24 20:24:43 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-24 20:24:43 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-May-24 20:24:43 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2010-May-24 20:24:43 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-May-24 20:24:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2010-May-24 20:24:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2010-May-24 20:24:46 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-24 20:24:46 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-May-24 20:24:46 LOG5 begin_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2010-May-24 20:24:46 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-May-24 20:24:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-May-24 20:24:46 LOG1 config_iflo: Receiver ALFA already selected 2010-May-24 20:24:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 20:24:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-24 20:24:46 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 20:24:46 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2010-May-24 20:24:46 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 20:24:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 20:24:46 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2010-May-24 20:24:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 20:24:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-24 20:24:47 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-May-24 20:24:47 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-May-24 20:24:47 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-May-24 20:24:47 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-May-24 20:24:47 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-May-24 20:24:47 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-May-24 20:24:47 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-May-24 20:24:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2010-May-24 20:24:47 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-May-24 20:24:47 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-May-24 20:24:47 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-May-24 20:24:47 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-May-24 20:24:47 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-May-24 20:24:47 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-May-24 20:24:47 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-May-24 20:24:47 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-May-24 20:24:47 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-May-24 20:24:47 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-May-24 20:24:47 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-May-24 20:24:47 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-May-24 20:24:47 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-May-24 20:24:47 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-May-24 20:24:47 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-May-24 20:24:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 20:24:47 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-May-24 20:24:47 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-May-24 20:24:47 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-May-24 20:24:47 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-May-24 20:24:47 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-May-24 20:24:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-May-24 20:24:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:24:47 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-May-24 20:24:47 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-May-24 20:24:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2010-May-24 20:24:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-May-24 20:24:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 20:24:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:24:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:24:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:24:47 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-May-24 20:24:47 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-May-24 20:24:47 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-May-24 20:24:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-May-24 20:24:47 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-May-24 20:24:47 LOG5 finish_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2010-May-24 20:24:47 DONE finish_task: DONE finished configuration: IF/LO path 2010-May-24 20:24:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-24 20:24:47 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-May-24 20:24:47 LOG5 end_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2010-May-24 20:24:47 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-May-24 20:24:47 LOG5 begin_task: Level: (2) ID = <10052> Status = 0 0 0 0 ok 2010-May-24 20:24:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-May-24 20:24:47 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-May-24 20:24:47 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-May-24 20:24:47 START begin_task: Starting task 'selecting calibration port' 2010-May-24 20:24:47 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-May-24 20:24:47 LOG3 vw_send: To DATATAKING: calport 3 2010-May-24 20:24:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-May-24 20:24:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:24:47 START begin_task: Starting task 'waiting on calport' 2010-May-24 20:24:47 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2010-May-24 20:24:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:24:47 LOG4 got_cormsg: From DATATAKING: calport 3 2010-May-24 20:24:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:24:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:24:48 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 20:24:48 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-May-24 20:24:48 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2010-May-24 20:24:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-May-24 20:24:48 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-May-24 20:24:48 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-May-24 20:24:48 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-24 20:24:48 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-24 20:24:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 20:24:48 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2010-May-24 20:24:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:24:48 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 20:24:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-24 20:24:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 20:24:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 20:24:48 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2010-May-24 20:24:48 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-May-24 20:24:48 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-May-24 20:24:48 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-May-24 20:24:48 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-May-24 20:24:48 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-May-24 20:24:48 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-May-24 20:24:48 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-May-24 20:24:48 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-May-24 20:24:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-24 20:24:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-24 20:24:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-24 20:24:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-24 20:24:48 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-May-24 20:24:48 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-May-24 20:24:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 20:24:48 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-May-24 20:24:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-May-24 20:24:48 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 20:24:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-May-24 20:24:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-24 20:24:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-24 20:24:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 20:24:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 20:24:48 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-May-24 20:24:48 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-May-24 20:24:48 STOP finish_task: Finishing task 'configuring WAPPs' 2010-May-24 20:24:48 LOG5 finish_task: Level: (2) ID = <10052> Status = 0 0 0 0 ok 2010-May-24 20:24:48 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-May-24 20:24:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-24 20:24:48 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-May-24 20:24:48 LOG5 end_task: Level: (2) ID = <10052> Status = 0 0 0 0 ok 2010-May-24 20:24:48 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2010-May-24 20:24:48 LOG5 begin_task: Level: (2) ID = <10057> Status = 0 0 0 0 ok 2010-May-24 20:24:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2010-May-24 20:24:48 INFO1 config_mock: Starting to configure the Mock spectrometer 2010-May-24 20:24:48 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-May-24 20:24:48 START begin_task: Starting task 'selecting calibration port' 2010-May-24 20:24:48 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-May-24 20:24:48 LOG3 vw_send: To DATATAKING: calport 3 2010-May-24 20:24:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-May-24 20:24:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:24:48 START begin_task: Starting task 'waiting on calport' 2010-May-24 20:24:48 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-May-24 20:24:48 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-May-24 20:24:48 LOG4 got_cormsg: From DATATAKING: calport 3 2010-May-24 20:24:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:24:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:24:49 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 20:24:49 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-May-24 20:24:49 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-May-24 20:24:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-May-24 20:24:49 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-May-24 20:24:49 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-May-24 20:24:49 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-24 20:24:49 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-24 20:24:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 20:24:49 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-May-24 20:24:49 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 20:24:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:24:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-24 20:24:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 20:24:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 20:24:49 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-May-24 20:24:49 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-May-24 20:24:49 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-May-24 20:24:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 20:24:49 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2010-May-24 20:24:49 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 20:24:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-24 20:24:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 20:24:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 20:24:49 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2010-May-24 20:24:49 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2010-May-24 20:24:49 LOG3 socket_wait: To MOCK: NOP 2010-May-24 20:24:49 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2010-May-24 20:24:49 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-May-24 20:24:49 LOG4 from_mock: From MOCK: nop ok 2010-May-24 20:24:49 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2010-May-24 20:24:49 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-May-24 20:24:49 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2010-May-24 20:24:49 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2010-May-24 20:24:49 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2010-May-24 20:24:49 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2010-May-24 20:24:49 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2010-May-24 20:24:49 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2010-May-24 20:24:49 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2010-May-24 20:24:49 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2010-May-24 20:24:49 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2010-May-24 20:24:49 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2010-May-24 20:24:49 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2010-May-24 20:24:49 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2010-May-24 20:24:49 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2010-May-24 20:24:49 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2010-May-24 20:24:49 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2010-May-24 20:24:49 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2010-May-24 20:24:49 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2010-May-24 20:24:49 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2010-May-24 20:24:49 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2010-May-24 20:24:49 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2010-May-24 20:24:49 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2010-May-24 20:24:49 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2010-May-24 20:24:49 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2010-May-24 20:24:51 LOG4 from_mock: From MOCK: confok 2010-May-24 20:24:51 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2010-May-24 20:24:51 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2010-May-24 20:24:51 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2010-May-24 20:24:51 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2010-May-24 20:24:51 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2010-May-24 20:24:51 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2010-May-24 20:24:51 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-May-24 20:24:51 LOG4 from_mock: From MOCK: confok 2010-May-24 20:24:51 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2010-May-24 20:24:51 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-May-24 20:24:51 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2010-May-24 20:24:51 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2010-May-24 20:24:51 LOG5 finish_task: Level: (2) ID = <10057> Status = 0 0 0 0 ok 2010-May-24 20:24:51 DONE finish_task: DONE finished configuring: the Mock spectrometer 2010-May-24 20:24:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-24 20:24:51 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2010-May-24 20:24:51 LOG5 end_task: Level: (2) ID = <10057> Status = 0 0 0 0 ok 2010-May-24 20:24:51 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2010-May-24 20:24:51 COMMAND run_command_line: EXECUTING command 28: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2010-May-24 20:24:51 COMMAND run_command_line: EXECUTING command 29: 'CATALOG AGESFull.cat' 2010-May-24 20:24:51 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2010-May-24 20:24:51 COMMAND run_command_line: EXECUTING command 32: 'IF LSTSLEW(AGESVC1A_p3_001) < 114333 THEN' 2010-May-24 20:24:52 LOG3 is_if_valid: Current source data: up 357.4 9.4 UP - - 73 0.5 2010-May-24 20:24:52 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1A_p3_001) < 114333 2010-May-24 20:24:52 INFO5 is_if_valid: Condition parsed as: 12.138153333333333 < 11.725833333333334 2010-May-24 20:24:52 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGESVC1A_p3_001) < 114333 THEN' 2010-May-24 20:24:52 COMMAND run_command_line: EXECUTING command 33: 'FIXEDDRIFT az=325.31 alfaangle=48.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p3_001 ra=120900.00 dec=90000.00' 2010-May-24 20:24:52 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=325.31 alfaangle=48.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p3_001 ra=120900.00 dec=90000.00' in non-true conditional branch 2010-May-24 20:24:52 COMMAND run_command_line: EXECUTING command 36: 'ENDIF' 2010-May-24 20:24:52 COMMAND run_command_line: EXECUTING command 39: 'IF LSTSLEW(AGESVC1B_p2_038) < 120632 THEN' 2010-May-24 20:24:52 LOG3 is_if_valid: Current source data: up 332.2 11.6 UP - - 90 0.8 2010-May-24 20:24:52 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1B_p2_038) < 120632 2010-May-24 20:24:52 INFO5 is_if_valid: Condition parsed as: 12.143153333333334 < 12.108888888888888 2010-May-24 20:24:52 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGESVC1B_p2_038) < 120632 THEN' 2010-May-24 20:24:53 COMMAND run_command_line: EXECUTING command 40: 'FIXEDDRIFT az=330.85 alfaangle=43.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_038 ra=122900.00 dec=80430.00' 2010-May-24 20:24:53 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=330.85 alfaangle=43.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_038 ra=122900.00 dec=80430.00' in non-true conditional branch 2010-May-24 20:24:53 COMMAND run_command_line: EXECUTING command 43: 'ENDIF' 2010-May-24 20:24:53 COMMAND run_command_line: EXECUTING command 46: 'IF LSTSLEW(AGESVC1B_p2_040) < 122932 THEN' 2010-May-24 20:24:53 LOG3 is_if_valid: Current source data: up 332.4 11.7 UP - - 90 0.8 2010-May-24 20:24:53 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1B_p2_040) < 122932 2010-May-24 20:24:53 INFO5 is_if_valid: Condition parsed as: 12.143153333333334 < 12.492222222222221 2010-May-24 20:24:53 COMMAND run_command_line: EXECUTING command 47: 'FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_040 ra=122900.00 dec=80130.00' 2010-May-24 20:24:53 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-May-24 20:24:53 COMMAND CIMA-send_to_exec: Sending command to abort observation 2010-May-24 20:24:53 WARNING check_obsmode: WARNING failed to get a response from the CIMA frontend when checking options for 'fixed azimuth drift map'! 2010-May-24 20:24:53 NOTE check_obsmode: Assuming that the options are OK 2010-May-24 20:24:53 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 0.00 19.1 hcorcal 5 tracking no off lcorcal first 1 AGESVC1B_p2_040 122900.00 80130.00 J 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:24:53 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-May-24 20:24:53 LOG5 begin_task: Level: (2) ID = <10065> Status = 0 0 0 0 ok 2010-May-24 20:24:53 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGESVC1A_p3_001' 2010-May-24 20:24:53 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-May-24 20:24:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p2_040} 2010-May-24 20:24:53 INFO3 fixed_driftmap: Sending telescope to Az = 0.00 and ZA = 10.39 2010-May-24 20:24:53 LOG3 track_source: Calling 'track_source AGESVC1B_p2_040 0.00 10.3883021971 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:24:53 START begin_task: Starting task 'sending tracking commands' 2010-May-24 20:24:53 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-May-24 20:24:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_040} INFO {Slewing to source 'AGESVC1B_p2_040' ...} 2010-May-24 20:24:53 INFO1 track_source: Starting to track AGESVC1B_p2_040 2010-May-24 20:24:53 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_040" 2010-May-24 20:24:53 LOG3 vw_send: To DATATAKING: set ra 0.00 2010-May-24 20:24:54 LOG3 vw_send: To DATATAKING: set dec 10.3883021971 2010-May-24 20:24:54 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-24 20:24:54 LOG3 vw_send: To DATATAKING: pnt tr 0.00 10.3883021971 -CF 2010-May-24 20:24:54 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:24:54 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-24 20:24:54 LOG5 finish_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-May-24 20:24:54 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-24 20:24:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:24:54 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-24 20:24:54 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-May-24 20:24:54 START begin_task: Starting task 'rotate ALFA to +19.1 degrees' 2010-May-24 20:24:54 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2010-May-24 20:24:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19.1 degrees ...} 2010-May-24 20:24:54 INFO2 rotate_alfa: ALFA commanded to +19.1 degrees 2010-May-24 20:24:54 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.1 REPLY 2010-May-24 20:24:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-May-24 20:24:54 START begin_task: Starting task 'waiting on ALFA rotation' 2010-May-24 20:24:54 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2010-May-24 20:24:54 LOG4 exec_msg: From OBSERVER: abort_task abort 2010-May-24 20:24:54 WARNING abort_task: WARNING abort requested! 2010-May-24 20:24:54 WARNING abort_task: WARNING Aborting wait for waiting on ALFA rotation 2010-May-24 20:24:54 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'ABORT' 2010-May-24 20:24:54 LOG5 end_task: Level: (4) ID = <10068> Status = 1 0 0 0 abort 2010-May-24 20:24:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 20:24:54 ALERT rotate_alfa: Current ALFA angle is +48.3 degrees! 2010-May-24 20:24:54 STOP finish_task: Finishing task 'rotate ALFA to +19.1 degrees' 2010-May-24 20:24:54 LOG5 finish_task: Level: (3) ID = <10067> Status = 1 0 0 0 abort 2010-May-24 20:24:54 WARNING finish_task: WARNING aborted configuration: rotating ALFA to +19.1 degrees 2010-May-24 20:24:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Aborted 2010-May-24 20:24:54 STOP end_task: Finishing task 'rotate ALFA to +19.1 degrees' with status 'ABORT' 2010-May-24 20:24:54 LOG5 end_task: Level: (3) ID = <10067> Status = 1 0 0 0 abort 2010-May-24 20:24:54 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-May-24 20:24:54 LOG5 finish_task: Level: (2) ID = <10065> Status = 1 0 0 0 abort 2010-May-24 20:24:54 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2010-May-24 20:24:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2010-May-24 20:24:54 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2010-May-24 20:24:54 LOG5 end_task: Level: (2) ID = <10065> Status = 1 0 0 0 abort 2010-May-24 20:24:54 ALERT run_command_file: Stopping command file processing at line 47! 2010-May-24 20:24:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-May-24 20:24:54 STOP finish_task: Finishing task 'running command file '100524.cmd'' 2010-May-24 20:24:54 LOG5 finish_task: Level: (1) ID = <10048> Status = 1 0 0 0 abort 2010-May-24 20:24:54 WARNING finish_task: WARNING aborted running: command file '100524.cmd' 2010-May-24 20:24:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2010-May-24 20:24:54 END end_task: Finishing task 'running command file '100524.cmd'' with status 'ABORT' 2010-May-24 20:24:54 LOG5 end_task: Level: (1) ID = <10048> Status = 1 0 0 0 abort 2010-May-24 20:24:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_040" 2010-May-24 20:24:54 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-24 20:24:54 LOG4 got_cormsg: From DATATAKING: set ra 0.00 2010-May-24 20:24:54 LOG4 got_cormsg: From DATATAKING: set dec 10.3883021971 2010-May-24 20:24:54 LOG4 got_cormsg: From DATATAKING: vw% 0.00 2010-May-24 20:24:54 LOG4 got_cormsg: From DATATAKING: vw% 10.3883021971 2010-May-24 20:24:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:24:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-24 20:24:54 LOG4 got_cormsg: From DATATAKING: pnt tr 0.00 10.3883021971 -CF 2010-May-24 20:24:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:24:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-24 20:24:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:25:11 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-May-24 20:25:11 INFO3 alfa_motor: ALFA rotator in-position +19.10 degrees 2010-May-24 20:25:25 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-May-24 20:25:25 LOG4 exec_msg: From OBSERVER: run_command_file 100524.cmd 40 1 28 2010-May-24 20:25:25 LOG4 run_command_file: Calling 'run_command_file 100524.cmd 40 1 28' 2010-May-24 20:25:25 BEGIN begin_task: Starting task 'running command file '100524.cmd'' 2010-May-24 20:25:25 LOG5 begin_task: Level: (1) ID = <10069> Status = 0 0 0 0 ok 2010-May-24 20:25:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100524.cmd' ...} 2010-May-24 20:25:25 NOTE run_command_file: Starting execution of command file '100524.cmd' from line 40 2010-May-24 20:25:25 COMMAND run_command_line: EXECUTING command 40: 'FIXEDDRIFT az=330.85 alfaangle=43.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_038 ra=122900.00 dec=80430.00' 2010-May-24 20:25:25 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-May-24 20:25:26 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-24 20:25:26 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 330.85 43.4 hcorcal 5 tracking no off lcorcal first 1 AGESVC1B_p2_038 122900.00 80430.00 J 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:25:26 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-May-24 20:25:26 LOG5 begin_task: Level: (2) ID = <10070> Status = 0 0 0 0 ok 2010-May-24 20:25:26 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGESVC1B_p2_040' 2010-May-24 20:25:26 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-May-24 20:25:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p2_038} 2010-May-24 20:25:26 INFO3 fixed_driftmap: Sending telescope to Az = 330.85 and ZA = 11.75 2010-May-24 20:25:26 LOG3 track_source: Calling 'track_source AGESVC1B_p2_038 330.85 11.7527303552 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:25:26 START begin_task: Starting task 'sending tracking commands' 2010-May-24 20:25:26 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-May-24 20:25:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_038} INFO {Slewing to source 'AGESVC1B_p2_038' ...} 2010-May-24 20:25:26 INFO1 track_source: Starting to track AGESVC1B_p2_038 2010-May-24 20:25:26 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_038" 2010-May-24 20:25:26 LOG3 vw_send: To DATATAKING: set ra 330.85 2010-May-24 20:25:26 LOG3 vw_send: To DATATAKING: set dec 11.7527303552 2010-May-24 20:25:26 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-24 20:25:26 LOG3 vw_send: To DATATAKING: pnt tr 330.85 11.7527303552 -CF 2010-May-24 20:25:26 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:25:26 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-24 20:25:26 LOG5 finish_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-May-24 20:25:26 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-24 20:25:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:25:26 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-24 20:25:26 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-May-24 20:25:26 START begin_task: Starting task 'rotate ALFA to +43.4 degrees' 2010-May-24 20:25:26 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2010-May-24 20:25:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +43.4 degrees ...} 2010-May-24 20:25:26 INFO2 rotate_alfa: ALFA commanded to +43.4 degrees 2010-May-24 20:25:26 LOG3 sock_errsend: To ALFAMOTOR: POSITION 43.4 REPLY 2010-May-24 20:25:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-May-24 20:25:26 START begin_task: Starting task 'waiting on ALFA rotation' 2010-May-24 20:25:26 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2010-May-24 20:25:26 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_038" 2010-May-24 20:25:26 LOG4 got_cormsg: From DATATAKING: set ra 330.85 2010-May-24 20:25:26 LOG4 got_cormsg: From DATATAKING: set dec 11.7527303552 2010-May-24 20:25:26 LOG4 got_cormsg: From DATATAKING: vw% 330.85 2010-May-24 20:25:26 LOG4 got_cormsg: From DATATAKING: vw% 11.7527303552 2010-May-24 20:25:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:25:26 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-24 20:25:26 LOG4 got_cormsg: From DATATAKING: pnt tr 330.85 11.7527303552 -CF 2010-May-24 20:25:26 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:25:26 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-24 20:25:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:25:41 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-May-24 20:25:41 INFO3 alfa_motor: ALFA rotator in-position +43.40 degrees 2010-May-24 20:25:41 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-May-24 20:25:41 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2010-May-24 20:25:41 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 20:25:41 STOP finish_task: Finishing task 'rotate ALFA to +43.4 degrees' 2010-May-24 20:25:41 LOG5 finish_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2010-May-24 20:25:41 INFO2 finish_task: DONE finished configuration: rotating ALFA to +43.4 degrees 2010-May-24 20:25:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:25:41 STOP end_task: Finishing task 'rotate ALFA to +43.4 degrees' with status 'OK' 2010-May-24 20:25:41 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2010-May-24 20:25:41 START begin_task: Starting task 'waiting on telescope' 2010-May-24 20:25:41 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2010-May-24 20:25:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-24 20:25:41 LOG3 waittrk: Start waittrk 5 2010-May-24 20:25:41 START begin_task: Starting task 'waiting on telescope movement' 2010-May-24 20:25:41 LOG5 begin_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2010-May-24 20:25:46 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-24 20:25:46 LOG5 end_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2010-May-24 20:25:46 START begin_task: Starting task 'waiting on telescope on source' 2010-May-24 20:25:46 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2010-May-24 20:26:57 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-24 20:26:57 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2010-May-24 20:26:57 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 20:26:57 INFO2 waittrk: Now tracking AGESVC1B_p2_038 2010-May-24 20:26:57 LOG4 waittrk: Current telescope position: Az = 330.48 ZA = 11.73 2010-May-24 20:26:57 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-24 20:26:57 LOG5 finish_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2010-May-24 20:26:57 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-24 20:26:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:26:57 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-24 20:26:57 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2010-May-24 20:26:57 START begin_task: Starting task 'selecting calibration type' 2010-May-24 20:26:57 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-May-24 20:26:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-24 20:26:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-24 20:26:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:26:57 START begin_task: Starting task 'waiting on setcal' 2010-May-24 20:26:57 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2010-May-24 20:26:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-24 20:26:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:26:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:26:57 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 20:26:57 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-24 20:26:57 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2010-May-24 20:26:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-24 20:26:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 20:26:57 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-24 20:26:57 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 20:26:57 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2010-May-24 20:26:57 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 20:26:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 20:26:57 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2010-May-24 20:26:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 20:26:57 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-24 20:26:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 20:26:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-24 20:26:57 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 20:26:57 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-May-24 20:26:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:26:57 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 20:26:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 20:26:57 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-May-24 20:26:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 20:26:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-24 20:26:57 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-24 20:26:57 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-May-24 20:26:57 LOG5 dopset_later: Calling 'dopset_later 0' 2010-May-24 20:26:57 INFO3 dopset_later: Setting Doppler correction now 2010-May-24 20:26:57 LOG5 antvel: Calling 'antvel 330.850000 11.752730 F Heliocentric 0' 2010-May-24 20:26:57 LOG2 antvel: Transforming current Az = 330.85 ZA = 11.75 to apparent RA = 12:32:53.8 Dec = +08:00:55.8 2010-May-24 20:26:57 LOG2 antvel: Parameters to Doppler: Heliocentric 88017 2010 144 0.0 2010-May-24 20:26:57 INFO5 antvel: Computed antenna velocity: +24.66231 km/s 2010-May-24 20:26:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=24.662305891100001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-May-24 20:26:57 INFO4 dopset_gen: New sky frequencies: 1381.129810 1381.129810 1381.129810 1381.129810 1381.129810 1381.129810 1381.129810 1381.129810 1381.129810 2010-May-24 20:26:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.129810 sky0=1381.129810 sky1=1381.129810 sky2=1381.129810 sky3=1381.129810 sky4=1381.129810 sky5=1381.129810 sky6=1381.129810 sky7=1381.129810 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 20:26:57 LOG2 dopset_gen: Result from 'sky2syn': 1631.129810 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 20:26:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631129810.0} 2010-May-24 20:26:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 20:26:57 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2010-May-24 20:26:57 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2010-May-24 20:26:57 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:32:25.1 Dec = +08:04:22.1 2010-May-24 20:26:57 LOG3 track_source: Calling 'track_source AGESVC1B_p2_038 123225.1 080422.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:26:57 START begin_task: Starting task 'sending tracking commands' 2010-May-24 20:26:57 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-May-24 20:26:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_038} INFO {Slewing to source 'AGESVC1B_p2_038' ...} 2010-May-24 20:26:57 INFO1 track_source: Starting to track AGESVC1B_p2_038 2010-May-24 20:26:57 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_038" 2010-May-24 20:26:57 LOG3 vw_send: To DATATAKING: set ra 123225.1 2010-May-24 20:26:57 LOG3 vw_send: To DATATAKING: set dec 080422.1 2010-May-24 20:26:57 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-24 20:26:57 LOG3 vw_send: To DATATAKING: pnt tr 123225.1 080422.1 -CJ 2010-May-24 20:26:57 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:26:57 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-24 20:26:57 LOG5 finish_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-May-24 20:26:57 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-24 20:26:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:26:58 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-24 20:26:58 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-May-24 20:26:58 START begin_task: Starting task 'waiting on telescope' 2010-May-24 20:26:58 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2010-May-24 20:26:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-24 20:26:58 LOG3 waittrk: Start waittrk 5 2010-May-24 20:26:58 START begin_task: Starting task 'waiting on telescope movement' 2010-May-24 20:26:58 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2010-May-24 20:26:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631129810.0} 2010-May-24 20:26:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 20:26:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:26:58 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_038" 2010-May-24 20:26:58 LOG4 got_cormsg: From DATATAKING: set ra 123225.1 2010-May-24 20:26:58 LOG4 got_cormsg: From DATATAKING: set dec 080422.1 2010-May-24 20:26:58 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-24 20:26:58 LOG4 got_cormsg: From DATATAKING: 123225.1 2010-May-24 20:26:58 LOG4 got_cormsg: From DATATAKING: vw% 080422.1 2010-May-24 20:26:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:26:58 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-24 20:26:58 LOG4 got_cormsg: From DATATAKING: pnt tr 123225.1 080422.1 -CJ 2010-May-24 20:26:58 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:26:58 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-24 20:26:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:27:03 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-24 20:27:03 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2010-May-24 20:27:03 START begin_task: Starting task 'waiting on telescope on source' 2010-May-24 20:27:03 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2010-May-24 20:27:06 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-24 20:27:06 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2010-May-24 20:27:06 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 20:27:06 INFO2 waittrk: Now tracking AGESVC1B_p2_038 2010-May-24 20:27:06 LOG4 waittrk: Current telescope position: Az = 330.56 ZA = 11.73 2010-May-24 20:27:06 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-24 20:27:06 LOG5 finish_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2010-May-24 20:27:06 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-24 20:27:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:27:06 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-24 20:27:06 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2010-May-24 20:27:06 START begin_task: Starting task 'adjusting WAPP+Mock power' 2010-May-24 20:27:06 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2010-May-24 20:27:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2010-May-24 20:27:06 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2010-May-24 20:27:06 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-May-24 20:27:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-May-24 20:27:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:27:06 START begin_task: Starting task 'waiting on adjpwrif2' 2010-May-24 20:27:06 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2010-May-24 20:27:06 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-May-24 20:27:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:27:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:27:09 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 20:27:09 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-May-24 20:27:09 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2010-May-24 20:27:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-May-24 20:27:09 START begin_task: Starting task 'adjusting WAPP power' 2010-May-24 20:27:09 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-May-24 20:27:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-24 20:27:09 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 20:27:09 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 20:27:09 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 20:27:09 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 20:27:09 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-May-24 20:27:09 LOG5 begin_task: Level: (5) ID = <10088> Status = 0 0 0 0 ok 2010-May-24 20:27:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-May-24 20:27:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:27:09 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-May-24 20:27:09 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 5 dB 2010-May-24 20:27:09 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 4 3 dB 2010-May-24 20:27:09 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-May-24 20:27:09 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-May-24 20:27:09 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-May-24 20:27:09 LOG5 end_task: Level: (5) ID = <10088> Status = 0 0 0 0 ok 2010-May-24 20:27:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.975 0.975 ALFA beam 1: 1.057 1.087 2010-May-24 20:27:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.021 0.982 ALFA beam 3: 0.946 1.027 2010-May-24 20:27:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.937 0.937 ALFA beam 5: 0.959 1.037 2010-May-24 20:27:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.944 0.909 ALFA beam 7: 1.027 1.064 2010-May-24 20:27:10 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-24 20:27:10 LOG5 finish_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-May-24 20:27:10 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-May-24 20:27:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:27:10 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-24 20:27:10 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-May-24 20:27:10 START begin_task: Starting task 'adjusting Mock spectrometer power' 2010-May-24 20:27:10 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-May-24 20:27:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-24 20:27:10 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2010-May-24 20:27:10 LOG3 socket_wait: To MOCK: ADJP30 2010-May-24 20:27:10 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2010-May-24 20:27:10 LOG5 begin_task: Level: (5) ID = <10090> Status = 0 0 0 0 ok 2010-May-24 20:27:17 INFO3 from_mock: From MOCK: b0s0g0 rms:A 33.5 29.6 B 29.3 29.2 mn:A -0.5 -0.8 B -1.0 -0.9 gn: 10 10 2010-May-24 20:27:17 INFO3 from_mock: From MOCK: b0s1g0 rms:A 24.9 23.8 B 24.4 25.8 mn:A 0.7 -0.8 B 0.4 0.3 gn: 8 9 2010-May-24 20:27:17 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.5 29.7 B 33.2 29.9 mn:A -0.2 0.4 B 0.1 1.5 gn: 9 10 2010-May-24 20:27:17 INFO3 from_mock: From MOCK: b1s1g0 rms:A 25.7 23.6 B 26.5 26.5 mn:A 0.1 0.5 B -0.5 0.0 gn: 8 8 2010-May-24 20:27:17 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.7 28.8 B 28.5 29.6 mn:A 0.1 -0.1 B 0.1 0.2 gn: 12 11 2010-May-24 20:27:17 INFO3 from_mock: From MOCK: b2s1g0 rms:A 24.9 25.3 B 26.0 24.2 mn:A -0.1 -0.5 B 0.2 0.1 gn: 12 10 2010-May-24 20:27:17 INFO3 from_mock: From MOCK: b3s0g0 rms:A 30.4 30.3 B 33.2 29.7 mn:A 0.4 -0.2 B 0.1 -0.2 gn: 11 12 2010-May-24 20:27:17 INFO3 from_mock: From MOCK: b3s1g0 rms:A 26.0 25.3 B 25.2 26.2 mn:A 0.1 -0.1 B -0.3 0.2 gn: 9 10 2010-May-24 20:27:17 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.4 29.4 B 30.5 30.7 mn:A 0.5 -0.4 B -0.1 0.3 gn: 10 14 2010-May-24 20:27:17 INFO3 from_mock: From MOCK: b4s1g0 rms:A 29.2 26.5 B 30.5 29.3 mn:A -0.5 -0.9 B 0.7 -0.8 gn: 11 17 2010-May-24 20:27:17 INFO3 from_mock: From MOCK: b5s0g0 rms:A 28.8 28.4 B 31.4 31.3 mn:A 0.1 0.1 B -0.3 -0.2 gn: 10 10 2010-May-24 20:27:17 INFO3 from_mock: From MOCK: b5s1g0 rms:A 26.8 26.3 B 26.3 26.4 mn:A -0.0 -0.2 B 0.2 0.9 gn: 9 8 2010-May-24 20:27:17 INFO3 from_mock: From MOCK: b6s0g0 rms:A 30.5 27.8 B 29.3 29.7 mn:A -0.4 -0.1 B -0.4 0.5 gn: 12 16 2010-May-24 20:27:17 INFO3 from_mock: From MOCK: b6s1g0 rms:A 29.8 27.2 B 29.2 28.7 mn:A -0.4 0.2 B 0.2 -0.4 gn: 13 17 2010-May-24 20:27:17 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2010-May-24 20:27:17 LOG5 end_task: Level: (5) ID = <10090> Status = 0 0 0 0 ok 2010-May-24 20:27:17 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2010-May-24 20:27:17 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2010-May-24 20:27:17 LOG5 finish_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-May-24 20:27:17 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2010-May-24 20:27:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:27:17 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2010-May-24 20:27:17 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-May-24 20:27:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-24 20:27:17 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2010-May-24 20:27:17 LOG5 finish_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2010-May-24 20:27:17 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2010-May-24 20:27:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:27:17 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2010-May-24 20:27:17 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2010-May-24 20:27:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-24 20:27:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-24 20:27:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-24 20:27:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-24 20:27:17 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20100524.a2048.0001.fits' is empty! 2010-May-24 20:27:17 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2010-May-24 20:27:17 START begin_task: Starting task 'WAPP+Mock calibration' 2010-May-24 20:27:17 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2010-May-24 20:27:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2010-May-24 20:27:17 START begin_task: Starting task 'selecting calibration type' 2010-May-24 20:27:17 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2010-May-24 20:27:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-24 20:27:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-24 20:27:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:27:18 START begin_task: Starting task 'waiting on setcal' 2010-May-24 20:27:18 LOG5 begin_task: Level: (5) ID = <10093> Status = 0 0 0 0 ok 2010-May-24 20:27:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-24 20:27:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-24 20:27:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:27:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:27:18 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 20:27:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-24 20:27:18 LOG5 end_task: Level: (5) ID = <10093> Status = 0 0 0 0 ok 2010-May-24 20:27:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-24 20:27:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 20:27:18 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-24 20:27:18 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 20:27:18 LOG5 begin_task: Level: (5) ID = <10094> Status = 0 0 0 0 ok 2010-May-24 20:27:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:27:18 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 20:27:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 20:27:18 LOG5 end_task: Level: (5) ID = <10094> Status = 0 0 0 0 ok 2010-May-24 20:27:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 20:27:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-24 20:27:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 20:27:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-24 20:27:18 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 20:27:18 LOG5 begin_task: Level: (5) ID = <10095> Status = 0 0 0 0 ok 2010-May-24 20:27:18 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 20:27:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 20:27:18 LOG5 end_task: Level: (5) ID = <10095> Status = 0 0 0 0 ok 2010-May-24 20:27:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 20:27:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-24 20:27:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-24 20:27:18 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2010-May-24 20:27:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-24 20:27:18 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-24 20:27:18 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-24 20:27:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 20:27:18 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2010-May-24 20:27:18 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 20:27:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-24 20:27:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 20:27:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 20:27:18 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2010-May-24 20:27:18 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-24 20:27:18 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-May-24 20:27:18 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2010-May-24 20:27:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-24 20:27:18 LOG5 log_alfabeam: Parameters: 12.540305555555557 8.0728055555555578 12.170765 2010.3965839607574 43.399921 2010-May-24 20:27:18 LOG4 log_alfabeam: ALFABEAM 0 12.540305555555550 8.072805555555556 2010-May-24 20:27:18 LOG4 log_alfabeam: ALFABEAM 1 12.538330451134026 8.174548317521033 2010-May-24 20:27:18 LOG4 log_alfabeam: ALFABEAM 2 12.534077826284673 8.107464208794909 2010-May-24 20:27:18 LOG4 log_alfabeam: ALFABEAM 3 12.535999876254598 8.005487717843639 2010-May-24 20:27:18 LOG4 log_alfabeam: ALFABEAM 4 12.542256406310687 7.970923277588256 2010-May-24 20:27:18 LOG4 log_alfabeam: ALFABEAM 5 12.546569594263572 8.038833196326276 2010-May-24 20:27:18 LOG4 log_alfabeam: ALFABEAM 6 12.544565754496652 8.140478439819928 2010-May-24 20:27:18 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-May-24 20:27:18 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-May-24 20:27:18 LOG3 take_mock_data: PSET configuration: obsnm=RT 2010-May-24 20:27:18 LOG3 take_mock_data: PSET configuration: object=AGESVC1B_p2_038 2010-May-24 20:27:18 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-May-24 20:27:18 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-May-24 20:27:18 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-May-24 20:27:18 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-May-24 20:27:18 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-May-24 20:27:18 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-May-24 20:27:18 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2010-May-24 20:27:18 LOG3 take_mock_data: PSET configuration: scantype=ON 2010-May-24 20:27:18 LOG3 take_mock_data: PSET configuration: patternid=14400114 2010-May-24 20:27:18 LOG3 take_mock_data: PSET configuration: scanid=14400114 2010-May-24 20:27:18 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-May-24 20:27:18 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-May-24 20:27:18 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-May-24 20:27:18 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456129810.0 2010-May-24 20:27:18 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306129810.0 2010-May-24 20:27:18 LOG3 take_mock_data: PSET configuration: filetype=1 2010-May-24 20:27:18 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-May-24 20:27:18 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=RT:object=AGESVC1B_p2_038:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=14400114:scanid=14400114:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456129810.0:topobfreqhz=1306129810.0:filetype=1 2010-May-24 20:27:18 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-May-24 20:27:18 LOG5 begin_task: Level: (5) ID = <10098> Status = 0 0 0 0 ok 2010-May-24 20:27:18 LOG4 from_mock: From MOCK: psetok 2010-May-24 20:27:18 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-May-24 20:27:18 LOG5 end_task: Level: (5) ID = <10098> Status = 0 0 0 0 ok 2010-May-24 20:27:18 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-May-24 20:27:18 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-May-24 20:27:18 LOG3 socket_wait: To MOCK: STAR5 2010-May-24 20:27:18 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-May-24 20:27:18 LOG5 begin_task: Level: (5) ID = <10099> Status = 0 0 0 0 ok 2010-May-24 20:27:18 LOG4 from_mock: From MOCK: starok 2010-May-24 20:27:18 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-May-24 20:27:18 LOG5 end_task: Level: (5) ID = <10099> Status = 0 0 0 0 ok 2010-May-24 20:27:18 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-May-24 20:27:18 INFO2 take_data: Starting WAPP+Mock 5-second scan: 14400114 2010-May-24 20:27:19 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-May-24 20:27:19 LOG5 begin_task: Level: (5) ID = <10100> Status = 0 0 0 0 ok 2010-May-24 20:27:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 20:27:19 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-May-24 20:27:19 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-May-24 20:27:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-24 20:27:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1640.00 2010-May-24 20:27:22 INFO2 got_mock_message: Mock spectrometer start file number is 00000 2010-May-24 20:27:22 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-May-24 20:27:22 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2010-May-24 20:27:22 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2010-May-24 20:27:22 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-May-24 20:27:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-May-24 20:27:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-May-24 20:27:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-May-24 20:27:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-May-24 20:27:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-May-24 20:27:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-May-24 20:27:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-May-24 20:27:22 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-May-24 20:27:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2010-May-24 20:27:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2010-May-24 20:27:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2010-May-24 20:27:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2010-May-24 20:27:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2010-May-24 20:27:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2010-May-24 20:27:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2010-May-24 20:27:25 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 20:27:25.00 2010-May-24 20:27:25 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1274747245.00 Mon May 24 20:27:25 2010 2010-May-24 20:27:25 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-May-24 20:27:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.129810 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 20:27:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 20:27:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 20:27:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 20:27:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 20:27:25 LOG3 WAPP=2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 20:27:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 20:27:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 20:27:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 20:27:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 20:27:25 LOG3 WAPP=1-save_rfcalc: Channel 5: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 20:27:31 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-May-24 20:27:31 INFO1 got_mock_message: From MOCK: DONE with observation 2010-May-24 20:27:31 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-May-24 20:27:31 LOG5 end_task: Level: (5) ID = <10100> Status = 0 0 0 0 ok 2010-May-24 20:27:31 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-May-24 20:27:31 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2010-May-24 20:27:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-24 20:27:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-24 20:27:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-24 20:27:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 20:27:31 LOG5 begin_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2010-May-24 20:27:31 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 20:27:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-24 20:27:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 20:27:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 20:27:31 LOG5 end_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2010-May-24 20:27:31 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2010-May-24 20:27:31 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-May-24 20:27:31 LOG5 begin_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2010-May-24 20:27:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2010-May-24 20:27:31 LOG5 log_alfabeam: Parameters: 12.540305555555557 8.0728055555555578 12.174108 2010.3965843410147 43.399921 2010-May-24 20:27:31 LOG4 log_alfabeam: ALFABEAM 0 12.540305555555550 8.072805555555552 2010-May-24 20:27:31 LOG4 log_alfabeam: ALFABEAM 1 12.538355043513956 8.174652841988625 2010-May-24 20:27:31 LOG4 log_alfabeam: ALFABEAM 2 12.534086281542994 8.107796770979462 2010-May-24 20:27:31 LOG4 log_alfabeam: ALFABEAM 3 12.535983583897783 8.005718116141754 2010-May-24 20:27:31 LOG4 log_alfabeam: ALFABEAM 4 12.542231745427333 7.970819773149031 2010-May-24 20:27:31 LOG4 log_alfabeam: ALFABEAM 5 12.546561376459868 8.038500112574336 2010-May-24 20:27:31 LOG4 log_alfabeam: ALFABEAM 6 12.544582041830767 8.140251203413658 2010-May-24 20:27:31 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-May-24 20:27:31 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-May-24 20:27:31 LOG3 take_mock_data: PSET configuration: obsnm=RT 2010-May-24 20:27:31 LOG3 take_mock_data: PSET configuration: object=AGESVC1B_p2_038 2010-May-24 20:27:31 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-May-24 20:27:31 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-May-24 20:27:31 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-May-24 20:27:31 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-May-24 20:27:31 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-May-24 20:27:31 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-May-24 20:27:31 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2010-May-24 20:27:31 LOG3 take_mock_data: PSET configuration: scantype=OFF 2010-May-24 20:27:31 LOG3 take_mock_data: PSET configuration: patternid=14400114 2010-May-24 20:27:31 LOG3 take_mock_data: PSET configuration: scanid=14400115 2010-May-24 20:27:31 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-May-24 20:27:31 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-May-24 20:27:31 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-May-24 20:27:31 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456129810.0 2010-May-24 20:27:31 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306129810.0 2010-May-24 20:27:31 LOG3 take_mock_data: PSET configuration: filetype=1 2010-May-24 20:27:31 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-May-24 20:27:31 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=RT:object=AGESVC1B_p2_038:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=14400114:scanid=14400115:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456129810.0:topobfreqhz=1306129810.0:filetype=1 2010-May-24 20:27:31 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-May-24 20:27:31 LOG5 begin_task: Level: (5) ID = <10103> Status = 0 0 0 0 ok 2010-May-24 20:27:31 LOG4 from_mock: From MOCK: psetok 2010-May-24 20:27:31 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-May-24 20:27:31 LOG5 end_task: Level: (5) ID = <10103> Status = 0 0 0 0 ok 2010-May-24 20:27:31 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-May-24 20:27:31 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-May-24 20:27:31 LOG3 socket_wait: To MOCK: STAR5 2010-May-24 20:27:31 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-May-24 20:27:31 LOG5 begin_task: Level: (5) ID = <10104> Status = 0 0 0 0 ok 2010-May-24 20:27:31 LOG4 from_mock: From MOCK: starok 2010-May-24 20:27:31 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-May-24 20:27:31 LOG5 end_task: Level: (5) ID = <10104> Status = 0 0 0 0 ok 2010-May-24 20:27:31 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-May-24 20:27:31 INFO2 take_data: Starting WAPP+Mock 5-second scan: 14400115 2010-May-24 20:27:31 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-May-24 20:27:31 LOG5 begin_task: Level: (5) ID = <10105> Status = 0 0 0 0 ok 2010-May-24 20:27:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 20:27:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2010-May-24 20:27:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1652.00 2010-May-24 20:27:32 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-May-24 20:27:32 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-May-24 20:27:34 INFO2 got_mock_message: Mock spectrometer start file number is 00100 2010-May-24 20:27:34 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-May-24 20:27:34 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2010-May-24 20:27:34 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2010-May-24 20:27:34 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-May-24 20:27:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-May-24 20:27:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-May-24 20:27:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-May-24 20:27:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-May-24 20:27:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-May-24 20:27:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-May-24 20:27:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-May-24 20:27:34 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-May-24 20:27:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2010-May-24 20:27:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2010-May-24 20:27:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2010-May-24 20:27:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2010-May-24 20:27:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2010-May-24 20:27:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2010-May-24 20:27:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2010-May-24 20:27:37 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 20:27:37.01 2010-May-24 20:27:37 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1274747257.01 Mon May 24 20:27:37 2010 2010-May-24 20:27:37 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-May-24 20:27:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.129810 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 20:27:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 20:27:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 20:27:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 20:27:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 20:27:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 20:27:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 20:27:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 20:27:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 20:27:37 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2010-May-24 20:27:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 20:27:43 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-May-24 20:27:43 INFO1 got_mock_message: From MOCK: DONE with observation 2010-May-24 20:27:43 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-May-24 20:27:43 LOG5 end_task: Level: (5) ID = <10105> Status = 0 0 0 0 ok 2010-May-24 20:27:43 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-May-24 20:27:43 LOG5 end_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2010-May-24 20:27:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-24 20:27:43 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2010-May-24 20:27:43 LOG5 finish_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2010-May-24 20:27:43 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2010-May-24 20:27:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:27:43 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2010-May-24 20:27:43 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2010-May-24 20:27:43 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2010-May-24 20:27:43 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 330.85 and ZA = 11.75 2010-May-24 20:27:43 LOG3 track_source: Calling 'track_source AGESVC1B_p2_038 330.85 11.7527303552 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:27:43 START begin_task: Starting task 'sending tracking commands' 2010-May-24 20:27:43 LOG5 begin_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2010-May-24 20:27:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_038} INFO {Slewing to source 'AGESVC1B_p2_038' ...} 2010-May-24 20:27:43 INFO1 track_source: Starting to track AGESVC1B_p2_038 2010-May-24 20:27:43 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_038" 2010-May-24 20:27:43 LOG3 vw_send: To DATATAKING: set ra 330.85 2010-May-24 20:27:43 LOG3 vw_send: To DATATAKING: set dec 11.7527303552 2010-May-24 20:27:43 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-24 20:27:43 LOG3 vw_send: To DATATAKING: pnt tr 330.85 11.7527303552 -CF 2010-May-24 20:27:43 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:27:43 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-24 20:27:43 LOG5 finish_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2010-May-24 20:27:43 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-24 20:27:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:27:43 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-24 20:27:43 LOG5 end_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2010-May-24 20:27:43 LOG1 fixed_driftmap: Parameters: HA = -00:23:00.1 Start = 12:06:33.3 LST = 12:10:38.8 diff = -245.5 secs 2010-May-24 20:27:43 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2010-May-24 20:27:43 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2010-May-24 20:27:43 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-May-24 20:27:43 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2010-May-24 20:27:43 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-24 20:27:43 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-May-24 20:27:43 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2010-May-24 20:27:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-24 20:27:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-24 20:27:43 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-May-24 20:27:43 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-May-24 20:27:43 LOG3 take_mock_data: PSET configuration: obsnm=RT 2010-May-24 20:27:43 LOG3 take_mock_data: PSET configuration: object=AGESVC1B_p2_038 2010-May-24 20:27:43 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-May-24 20:27:43 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-May-24 20:27:43 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-May-24 20:27:43 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-May-24 20:27:43 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-May-24 20:27:43 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-May-24 20:27:43 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2010-May-24 20:27:43 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2010-May-24 20:27:43 LOG3 take_mock_data: PSET configuration: patternid=14400116 2010-May-24 20:27:43 LOG3 take_mock_data: PSET configuration: scanid=14400116 2010-May-24 20:27:43 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-May-24 20:27:43 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-May-24 20:27:43 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-May-24 20:27:43 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456129810.0 2010-May-24 20:27:43 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306129810.0 2010-May-24 20:27:43 LOG3 take_mock_data: PSET configuration: filetype=1 2010-May-24 20:27:43 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-May-24 20:27:43 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=RT:object=AGESVC1B_p2_038:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=14400116:scanid=14400116:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456129810.0:topobfreqhz=1306129810.0:filetype=1 2010-May-24 20:27:43 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-May-24 20:27:43 LOG5 begin_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2010-May-24 20:27:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_038" 2010-May-24 20:27:43 LOG4 got_cormsg: From DATATAKING: set ra 330.85 2010-May-24 20:27:43 LOG4 from_mock: From MOCK: psetok 2010-May-24 20:27:43 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-May-24 20:27:43 LOG5 end_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2010-May-24 20:27:43 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-May-24 20:27:43 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-May-24 20:27:43 LOG3 socket_wait: To MOCK: STAR1200 2010-May-24 20:27:43 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-May-24 20:27:43 LOG5 begin_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2010-May-24 20:27:43 LOG4 got_cormsg: From DATATAKING: set dec 11.7527303552 2010-May-24 20:27:43 LOG4 got_cormsg: From DATATAKING: vw% 330.85 2010-May-24 20:27:43 LOG4 from_mock: From MOCK: starok 2010-May-24 20:27:43 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-May-24 20:27:43 LOG5 end_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2010-May-24 20:27:43 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-May-24 20:27:43 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 14400116 2010-May-24 20:27:44 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-May-24 20:27:44 LOG5 begin_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2010-May-24 20:27:44 LOG4 got_cormsg: From DATATAKING: vw% 11.7527303552 2010-May-24 20:27:44 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-May-24 20:27:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 20:27:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:27:44 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-May-24 20:27:44 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-24 20:27:44 LOG4 got_cormsg: From DATATAKING: pnt tr 330.85 11.7527303552 -CF 2010-May-24 20:27:44 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:27:44 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-24 20:27:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:27:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-24 20:27:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1665.00 2010-May-24 20:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.129810 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 20:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 20:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 20:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 20:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 20:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 20:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 20:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 20:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.129810 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 20:27:46 INFO2 got_mock_message: Mock spectrometer start file number is 00200 2010-May-24 20:27:46 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-May-24 20:27:46 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2010-May-24 20:27:46 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2010-May-24 20:27:46 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-May-24 20:27:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-May-24 20:27:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-May-24 20:27:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-May-24 20:27:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-May-24 20:27:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-May-24 20:27:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-May-24 20:27:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-May-24 20:27:46 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-May-24 20:27:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.16 GB 2010-May-24 20:27:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.16 GB 2010-May-24 20:27:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.16 GB 2010-May-24 20:27:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.16 GB 2010-May-24 20:27:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.16 GB 2010-May-24 20:27:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.16 GB 2010-May-24 20:27:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.16 GB 2010-May-24 20:27:47 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2010-May-24 20:27:49 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 20:27:49.01 2010-May-24 20:27:49 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1274747269.01 Mon May 24 20:27:49 2010 2010-May-24 20:27:49 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-May-24 20:27:58 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2010-May-24 20:47:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 20:47:50 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-May-24 20:47:50 INFO1 got_mock_message: From MOCK: DONE with observation 2010-May-24 20:47:50 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-May-24 20:47:50 LOG5 end_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2010-May-24 20:47:50 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-May-24 20:47:50 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2010-May-24 20:47:50 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-May-24 20:47:50 LOG5 finish_task: Level: (2) ID = <10070> Status = 0 0 0 0 ok 2010-May-24 20:47:50 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2010-May-24 20:47:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-24 20:47:50 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2010-May-24 20:47:50 LOG5 end_task: Level: (2) ID = <10070> Status = 0 0 0 0 ok 2010-May-24 20:47:50 COMMAND run_command_line: EXECUTING command 43: 'ENDIF' 2010-May-24 20:47:50 ERROR run_command_line: ERROR found an 'ENDIF' without matching 'IF'! 2010-May-24 20:47:50 LOG1 task_failed: Task 'running command file '100524.cmd'' failed! 2010-May-24 20:47:50 LOG5 task_failed: Level: (1) ID = <10069> Status = 0 0 0 0 ok 2010-May-24 20:47:50 ALERT run_command_file: Stopping command file processing at line 43! 2010-May-24 20:47:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-May-24 20:47:50 STOP finish_task: Finishing task 'running command file '100524.cmd'' 2010-May-24 20:47:50 LOG5 finish_task: Level: (1) ID = <10069> Status = 0 0 0 1 failed 2010-May-24 20:47:50 ERROR finish_task: ERROR failed running: command file '100524.cmd' 2010-May-24 20:47:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-May-24 20:47:50 END end_task: Finishing task 'running command file '100524.cmd'' with status 'FAILED' 2010-May-24 20:47:50 LOG5 end_task: Level: (1) ID = <10069> Status = 0 0 0 1 failed 2010-May-24 20:48:13 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-May-24 20:48:13 LOG4 exec_msg: From OBSERVER: run_command_file 100524.cmd 44 1 28 2010-May-24 20:48:13 LOG4 run_command_file: Calling 'run_command_file 100524.cmd 44 1 28' 2010-May-24 20:48:13 BEGIN begin_task: Starting task 'running command file '100524.cmd'' 2010-May-24 20:48:13 LOG5 begin_task: Level: (1) ID = <10111> Status = 0 0 0 0 ok 2010-May-24 20:48:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100524.cmd' ...} 2010-May-24 20:48:13 NOTE run_command_file: Starting execution of command file '100524.cmd' from line 44 2010-May-24 20:48:13 COMMAND run_command_line: EXECUTING command 46: 'IF LSTSLEW(AGESVC1B_p2_040) < 122932 THEN' 2010-May-24 20:48:13 LOG3 is_if_valid: Current source data: up 362.3 10.4 UP - - 67 1.3 2010-May-24 20:48:13 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1B_p2_040) < 122932 2010-May-24 20:48:13 INFO5 is_if_valid: Condition parsed as: 12.541718666666666 < 12.492222222222221 2010-May-24 20:48:13 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGESVC1B_p2_040) < 122932 THEN' 2010-May-24 20:48:13 COMMAND run_command_line: EXECUTING command 47: 'FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_040 ra=122900.00 dec=80130.00' 2010-May-24 20:48:14 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_040 ra=122900.00 dec=80130.00' in non-true conditional branch 2010-May-24 20:48:14 COMMAND run_command_line: EXECUTING command 50: 'ENDIF' 2010-May-24 20:48:14 COMMAND run_command_line: EXECUTING command 53: 'IF LSTSLEW(AGESVC1B_p3_001) < 125232 THEN' 2010-May-24 20:48:14 LOG3 is_if_valid: Current source data: up 362.6 9.4 UP - - 69 1.3 2010-May-24 20:48:14 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1B_p3_001) < 125232 2010-May-24 20:48:14 INFO5 is_if_valid: Condition parsed as: 12.541718666666666 < 12.875555555555556 2010-May-24 20:48:14 COMMAND run_command_line: EXECUTING command 54: 'FIXEDDRIFT az=31.42 alfaangle=-7.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_001 ra=122900.00 dec=90000.00' 2010-May-24 20:48:14 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-May-24 20:48:15 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-24 20:48:15 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 31.42 -7.3 hcorcal 5 tracking no off lcorcal first 1 AGESVC1B_p3_001 122900.00 90000.00 J 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:48:15 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-May-24 20:48:15 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2010-May-24 20:48:15 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGESVC1B_p2_038' 2010-May-24 20:48:15 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-May-24 20:48:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p3_001} 2010-May-24 20:48:15 INFO3 fixed_driftmap: Sending telescope to Az = 31.42 and ZA = 10.94 2010-May-24 20:48:15 LOG3 track_source: Calling 'track_source AGESVC1B_p3_001 31.42 10.9424503134 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:48:15 START begin_task: Starting task 'sending tracking commands' 2010-May-24 20:48:15 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2010-May-24 20:48:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_001} INFO {Slewing to source 'AGESVC1B_p3_001' ...} 2010-May-24 20:48:15 INFO1 track_source: Starting to track AGESVC1B_p3_001 2010-May-24 20:48:15 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_001" 2010-May-24 20:48:15 LOG3 vw_send: To DATATAKING: set ra 31.42 2010-May-24 20:48:15 LOG3 vw_send: To DATATAKING: set dec 10.9424503134 2010-May-24 20:48:15 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-24 20:48:15 LOG3 vw_send: To DATATAKING: pnt tr 31.42 10.9424503134 -CF 2010-May-24 20:48:15 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:48:15 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-24 20:48:15 LOG5 finish_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2010-May-24 20:48:15 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-24 20:48:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:48:15 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-24 20:48:15 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2010-May-24 20:48:15 START begin_task: Starting task 'rotate ALFA to -7.3 degrees' 2010-May-24 20:48:15 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2010-May-24 20:48:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -7.3 degrees ...} 2010-May-24 20:48:15 INFO2 rotate_alfa: ALFA commanded to -7.3 degrees 2010-May-24 20:48:15 LOG3 sock_errsend: To ALFAMOTOR: POSITION -7.3 REPLY 2010-May-24 20:48:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-May-24 20:48:15 START begin_task: Starting task 'waiting on ALFA rotation' 2010-May-24 20:48:15 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2010-May-24 20:48:15 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_001" 2010-May-24 20:48:15 LOG4 got_cormsg: From DATATAKING: set ra 31.42 2010-May-24 20:48:15 LOG4 got_cormsg: From DATATAKING: set dec 10.9424503134 2010-May-24 20:48:15 LOG4 got_cormsg: From DATATAKING: vw% 31.42 2010-May-24 20:48:15 LOG4 got_cormsg: From DATATAKING: vw% 10.9424503134 2010-May-24 20:48:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:48:15 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-24 20:48:15 LOG4 got_cormsg: From DATATAKING: pnt tr 31.42 10.9424503134 -CF 2010-May-24 20:48:15 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:48:15 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-24 20:48:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:48:44 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-May-24 20:48:44 INFO3 alfa_motor: ALFA rotator in-position -7.30 degrees 2010-May-24 20:48:44 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-May-24 20:48:44 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2010-May-24 20:48:44 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 20:48:44 STOP finish_task: Finishing task 'rotate ALFA to -7.3 degrees' 2010-May-24 20:48:44 LOG5 finish_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2010-May-24 20:48:44 INFO2 finish_task: DONE finished configuration: rotating ALFA to -7.3 degrees 2010-May-24 20:48:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:48:44 STOP end_task: Finishing task 'rotate ALFA to -7.3 degrees' with status 'OK' 2010-May-24 20:48:44 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2010-May-24 20:48:44 START begin_task: Starting task 'waiting on telescope' 2010-May-24 20:48:44 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2010-May-24 20:48:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-24 20:48:44 LOG3 waittrk: Start waittrk 5 2010-May-24 20:48:44 START begin_task: Starting task 'waiting on telescope movement' 2010-May-24 20:48:44 LOG5 begin_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2010-May-24 20:48:48 COMMAND CIMA-send_to_exec: Sending command to abort observation 2010-May-24 20:48:48 LOG4 exec_msg: From OBSERVER: abort_task abort 2010-May-24 20:48:48 WARNING abort_task: WARNING abort requested! 2010-May-24 20:48:48 WARNING abort_task: WARNING Aborting wait for waiting on telescope movement 2010-May-24 20:48:48 STOP end_task: Finishing task 'waiting on telescope movement' with status 'ABORT' 2010-May-24 20:48:48 LOG5 end_task: Level: (4) ID = <10117> Status = 1 0 0 0 abort 2010-May-24 20:48:48 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 20:48:48 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-24 20:48:48 LOG5 finish_task: Level: (3) ID = <10116> Status = 1 0 0 0 abort 2010-May-24 20:48:48 WARNING finish_task: WARNING aborted waiting: telescope on source 2010-May-24 20:48:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Aborted 2010-May-24 20:48:48 STOP end_task: Finishing task 'waiting on telescope' with status 'ABORT' 2010-May-24 20:48:48 LOG5 end_task: Level: (3) ID = <10116> Status = 1 0 0 0 abort 2010-May-24 20:48:48 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-May-24 20:48:48 LOG5 finish_task: Level: (2) ID = <10112> Status = 1 0 0 0 abort 2010-May-24 20:48:48 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2010-May-24 20:48:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2010-May-24 20:48:48 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2010-May-24 20:48:48 LOG5 end_task: Level: (2) ID = <10112> Status = 1 0 0 0 abort 2010-May-24 20:48:48 ALERT run_command_file: Stopping command file processing at line 54! 2010-May-24 20:48:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-May-24 20:48:49 STOP finish_task: Finishing task 'running command file '100524.cmd'' 2010-May-24 20:48:49 LOG5 finish_task: Level: (1) ID = <10111> Status = 1 0 0 0 abort 2010-May-24 20:48:49 WARNING finish_task: WARNING aborted running: command file '100524.cmd' 2010-May-24 20:48:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2010-May-24 20:48:49 END end_task: Finishing task 'running command file '100524.cmd'' with status 'ABORT' 2010-May-24 20:48:49 LOG5 end_task: Level: (1) ID = <10111> Status = 1 0 0 0 abort 2010-May-24 20:48:55 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-May-24 20:48:55 LOG4 exec_msg: From OBSERVER: run_command_file 100524.cmd 47 1 28 2010-May-24 20:48:55 LOG4 run_command_file: Calling 'run_command_file 100524.cmd 47 1 28' 2010-May-24 20:48:55 BEGIN begin_task: Starting task 'running command file '100524.cmd'' 2010-May-24 20:48:55 LOG5 begin_task: Level: (1) ID = <10118> Status = 0 0 0 0 ok 2010-May-24 20:48:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100524.cmd' ...} 2010-May-24 20:48:55 NOTE run_command_file: Starting execution of command file '100524.cmd' from line 47 2010-May-24 20:48:55 COMMAND run_command_line: EXECUTING command 47: 'FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_040 ra=122900.00 dec=80130.00' 2010-May-24 20:48:55 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-May-24 20:48:56 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-24 20:48:56 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 0.00 19.1 hcorcal 5 tracking no off lcorcal first 1 AGESVC1B_p2_040 122900.00 80130.00 J 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:48:56 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-May-24 20:48:56 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2010-May-24 20:48:56 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGESVC1B_p3_001' 2010-May-24 20:48:56 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-May-24 20:48:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p2_040} 2010-May-24 20:48:56 INFO3 fixed_driftmap: Sending telescope to Az = 0.00 and ZA = 10.39 2010-May-24 20:48:56 LOG3 track_source: Calling 'track_source AGESVC1B_p2_040 0.00 10.3883017698 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:48:56 START begin_task: Starting task 'sending tracking commands' 2010-May-24 20:48:56 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2010-May-24 20:48:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_040} INFO {Slewing to source 'AGESVC1B_p2_040' ...} 2010-May-24 20:48:56 INFO1 track_source: Starting to track AGESVC1B_p2_040 2010-May-24 20:48:56 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_040" 2010-May-24 20:48:56 LOG3 vw_send: To DATATAKING: set ra 0.00 2010-May-24 20:48:56 LOG3 vw_send: To DATATAKING: set dec 10.3883017698 2010-May-24 20:48:56 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-24 20:48:56 LOG3 vw_send: To DATATAKING: pnt tr 0.00 10.3883017698 -CF 2010-May-24 20:48:56 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:48:56 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-24 20:48:56 LOG5 finish_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2010-May-24 20:48:56 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-24 20:48:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:48:56 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-24 20:48:56 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2010-May-24 20:48:56 START begin_task: Starting task 'rotate ALFA to +19.1 degrees' 2010-May-24 20:48:56 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2010-May-24 20:48:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19.1 degrees ...} 2010-May-24 20:48:56 INFO2 rotate_alfa: ALFA commanded to +19.1 degrees 2010-May-24 20:48:56 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.1 REPLY 2010-May-24 20:48:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-May-24 20:48:56 START begin_task: Starting task 'waiting on ALFA rotation' 2010-May-24 20:48:56 LOG5 begin_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2010-May-24 20:48:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_040" 2010-May-24 20:48:56 LOG4 got_cormsg: From DATATAKING: set ra 0.00 2010-May-24 20:48:56 LOG4 got_cormsg: From DATATAKING: set dec 10.3883017698 2010-May-24 20:48:56 LOG4 got_cormsg: From DATATAKING: vw% 0.00 2010-May-24 20:48:56 LOG4 got_cormsg: From DATATAKING: vw% 10.3883017698 2010-May-24 20:48:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:48:56 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-24 20:48:56 LOG4 got_cormsg: From DATATAKING: pnt tr 0.00 10.3883017698 -CF 2010-May-24 20:48:56 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:48:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-24 20:48:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:49:12 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-May-24 20:49:12 INFO3 alfa_motor: ALFA rotator in-position +19.10 degrees 2010-May-24 20:49:12 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-May-24 20:49:12 LOG5 end_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2010-May-24 20:49:12 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 20:49:12 STOP finish_task: Finishing task 'rotate ALFA to +19.1 degrees' 2010-May-24 20:49:12 LOG5 finish_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2010-May-24 20:49:12 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19.1 degrees 2010-May-24 20:49:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:49:12 STOP end_task: Finishing task 'rotate ALFA to +19.1 degrees' with status 'OK' 2010-May-24 20:49:12 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2010-May-24 20:49:12 START begin_task: Starting task 'waiting on telescope' 2010-May-24 20:49:12 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2010-May-24 20:49:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-24 20:49:12 LOG3 waittrk: Start waittrk 5 2010-May-24 20:49:12 START begin_task: Starting task 'waiting on telescope movement' 2010-May-24 20:49:12 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2010-May-24 20:49:17 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-24 20:49:17 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2010-May-24 20:49:17 START begin_task: Starting task 'waiting on telescope on source' 2010-May-24 20:49:17 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2010-May-24 20:49:41 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-24 20:49:41 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2010-May-24 20:49:41 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 20:49:41 INFO2 waittrk: Now tracking AGESVC1B_p2_040 2010-May-24 20:49:41 LOG4 waittrk: Current telescope position: Az = 359.64 ZA = 10.36 2010-May-24 20:49:41 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-24 20:49:41 LOG5 finish_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2010-May-24 20:49:41 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-24 20:49:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:49:41 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-24 20:49:41 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2010-May-24 20:49:41 START begin_task: Starting task 'selecting calibration type' 2010-May-24 20:49:41 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2010-May-24 20:49:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-24 20:49:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-24 20:49:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:49:41 START begin_task: Starting task 'waiting on setcal' 2010-May-24 20:49:41 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2010-May-24 20:49:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-24 20:49:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:49:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:49:42 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 20:49:42 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-24 20:49:42 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2010-May-24 20:49:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-24 20:49:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 20:49:42 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-24 20:49:42 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 20:49:42 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2010-May-24 20:49:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:49:42 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 20:49:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 20:49:42 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2010-May-24 20:49:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 20:49:42 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-24 20:49:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 20:49:42 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-24 20:49:42 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 20:49:42 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2010-May-24 20:49:42 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 20:49:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 20:49:42 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2010-May-24 20:49:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 20:49:42 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-24 20:49:42 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-24 20:49:42 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2010-May-24 20:49:42 LOG5 dopset_later: Calling 'dopset_later 0' 2010-May-24 20:49:42 INFO3 dopset_later: Setting Doppler correction now 2010-May-24 20:49:42 LOG5 antvel: Calling 'antvel 0.000000 10.388302 F Heliocentric 0' 2010-May-24 20:49:42 LOG2 antvel: Transforming current Az = 0.00 ZA = 10.39 to apparent RA = 12:32:42.4 Dec = +07:57:55.8 2010-May-24 20:49:42 LOG2 antvel: Parameters to Doppler: Heliocentric 89382 2010 144 0.0 2010-May-24 20:49:42 INFO5 antvel: Computed antenna velocity: +24.72133 km/s 2010-May-24 20:49:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=24.721327955700001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-May-24 20:49:42 INFO4 dopset_gen: New sky frequencies: 1381.129539 1381.129539 1381.129539 1381.129539 1381.129539 1381.129539 1381.129539 1381.129539 1381.129539 2010-May-24 20:49:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.129539 sky0=1381.129539 sky1=1381.129539 sky2=1381.129539 sky3=1381.129539 sky4=1381.129539 sky5=1381.129539 sky6=1381.129539 sky7=1381.129539 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 20:49:42 LOG2 dopset_gen: Result from 'sky2syn': 1631.129539 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 20:49:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631129539.0} 2010-May-24 20:49:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 20:49:42 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2010-May-24 20:49:42 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2010-May-24 20:49:42 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:32:13.7 Dec = +08:01:22.1 2010-May-24 20:49:42 LOG3 track_source: Calling 'track_source AGESVC1B_p2_040 123213.7 080122.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:49:42 START begin_task: Starting task 'sending tracking commands' 2010-May-24 20:49:42 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2010-May-24 20:49:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_040} INFO {Slewing to source 'AGESVC1B_p2_040' ...} 2010-May-24 20:49:42 INFO1 track_source: Starting to track AGESVC1B_p2_040 2010-May-24 20:49:42 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_040" 2010-May-24 20:49:42 LOG3 vw_send: To DATATAKING: set ra 123213.7 2010-May-24 20:49:42 LOG3 vw_send: To DATATAKING: set dec 080122.1 2010-May-24 20:49:42 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-24 20:49:42 LOG3 vw_send: To DATATAKING: pnt tr 123213.7 080122.1 -CJ 2010-May-24 20:49:42 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:49:42 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-24 20:49:42 LOG5 finish_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2010-May-24 20:49:42 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-24 20:49:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:49:42 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-24 20:49:42 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2010-May-24 20:49:42 START begin_task: Starting task 'waiting on telescope' 2010-May-24 20:49:42 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2010-May-24 20:49:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-24 20:49:42 LOG3 waittrk: Start waittrk 5 2010-May-24 20:49:42 START begin_task: Starting task 'waiting on telescope movement' 2010-May-24 20:49:42 LOG5 begin_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2010-May-24 20:49:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631129539.0} 2010-May-24 20:49:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 20:49:42 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_040" 2010-May-24 20:49:42 LOG4 got_cormsg: From DATATAKING: set ra 123213.7 2010-May-24 20:49:42 LOG4 got_cormsg: From DATATAKING: set dec 080122.1 2010-May-24 20:49:42 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 123213.7 2010-May-24 20:49:42 LOG4 got_cormsg: From DATATAKING: vw% 080122.1 2010-May-24 20:49:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:49:42 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-24 20:49:43 LOG4 got_cormsg: From DATATAKING: pnt tr 123213.7 080122.1 -CJ 2010-May-24 20:49:43 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:49:43 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-24 20:49:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:49:47 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-24 20:49:47 LOG5 end_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2010-May-24 20:49:47 START begin_task: Starting task 'waiting on telescope on source' 2010-May-24 20:49:47 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2010-May-24 20:49:50 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-24 20:49:50 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2010-May-24 20:49:50 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 20:49:50 INFO2 waittrk: Now tracking AGESVC1B_p2_040 2010-May-24 20:49:50 LOG4 waittrk: Current telescope position: Az = 359.72 ZA = 10.36 2010-May-24 20:49:50 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-24 20:49:50 LOG5 finish_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2010-May-24 20:49:50 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-24 20:49:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:49:50 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-24 20:49:50 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2010-May-24 20:49:50 START begin_task: Starting task 'adjusting WAPP+Mock power' 2010-May-24 20:49:50 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-May-24 20:49:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2010-May-24 20:49:50 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2010-May-24 20:49:50 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-May-24 20:49:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-May-24 20:49:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:49:50 START begin_task: Starting task 'waiting on adjpwrif2' 2010-May-24 20:49:50 LOG5 begin_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2010-May-24 20:49:50 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-May-24 20:49:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:49:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:49:53 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 20:49:53 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-May-24 20:49:53 LOG5 end_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2010-May-24 20:49:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-May-24 20:49:53 START begin_task: Starting task 'adjusting WAPP power' 2010-May-24 20:49:53 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2010-May-24 20:49:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-24 20:49:53 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 20:49:53 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 20:49:53 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 20:49:53 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 20:49:53 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-May-24 20:49:53 LOG5 begin_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2010-May-24 20:49:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-May-24 20:49:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:49:53 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-May-24 20:49:53 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 5 dB 2010-May-24 20:49:53 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 4 3 dB 2010-May-24 20:49:53 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-May-24 20:49:53 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-May-24 20:49:53 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-May-24 20:49:53 LOG5 end_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2010-May-24 20:49:53 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.983 0.982 ALFA beam 1: 1.065 1.089 2010-May-24 20:49:53 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.005 0.976 ALFA beam 3: 0.934 1.029 2010-May-24 20:49:53 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.938 0.938 ALFA beam 5: 0.964 1.025 2010-May-24 20:49:53 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.962 0.912 ALFA beam 7: 1.048 1.065 2010-May-24 20:49:53 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-24 20:49:53 LOG5 finish_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2010-May-24 20:49:53 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-May-24 20:49:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:49:54 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-24 20:49:54 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2010-May-24 20:49:54 START begin_task: Starting task 'adjusting Mock spectrometer power' 2010-May-24 20:49:54 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2010-May-24 20:49:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-24 20:49:54 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2010-May-24 20:49:54 LOG3 socket_wait: To MOCK: ADJP30 2010-May-24 20:49:54 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2010-May-24 20:49:54 LOG5 begin_task: Level: (5) ID = <10139> Status = 0 0 0 0 ok 2010-May-24 20:50:01 INFO3 from_mock: From MOCK: b0s0g0 rms:A 33.4 29.5 B 29.1 29.0 mn:A -0.5 -0.8 B -0.9 -0.9 gn: 10 10 2010-May-24 20:50:01 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.5 30.2 B 32.3 34.1 mn:A 0.7 -0.7 B 0.3 0.3 gn: 10 11 2010-May-24 20:50:01 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.4 29.6 B 33.1 29.7 mn:A -0.0 0.4 B 0.0 1.4 gn: 9 10 2010-May-24 20:50:01 INFO3 from_mock: From MOCK: b1s1g0 rms:A 34.1 31.4 B 33.3 33.3 mn:A 0.1 0.5 B -0.5 0.0 gn: 10 9 2010-May-24 20:50:01 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.7 28.8 B 28.2 29.4 mn:A 0.1 -0.1 B 0.1 0.2 gn: 12 11 2010-May-24 20:50:01 INFO3 from_mock: From MOCK: b2s1g0 rms:A 32.5 32.9 B 36.5 33.9 mn:A -0.1 -0.5 B 0.0 0.1 gn: 14 12 2010-May-24 20:50:01 INFO3 from_mock: From MOCK: b3s0g0 rms:A 30.1 30.1 B 33.0 29.5 mn:A 0.4 -0.1 B 0.2 -0.3 gn: 11 12 2010-May-24 20:50:01 INFO3 from_mock: From MOCK: b3s1g0 rms:A 32.0 31.3 B 29.3 30.5 mn:A 0.1 -0.2 B -0.4 0.3 gn: 11 11 2010-May-24 20:50:01 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.4 29.4 B 30.5 30.7 mn:A 0.4 -0.5 B -0.0 0.3 gn: 10 14 2010-May-24 20:50:01 INFO3 from_mock: From MOCK: b4s1g0 rms:A 33.1 30.0 B 32.3 31.0 mn:A -0.5 -0.8 B 0.7 -0.7 gn: 12 17 2010-May-24 20:50:01 INFO3 from_mock: From MOCK: b5s0g0 rms:A 28.9 28.5 B 31.1 31.0 mn:A 0.3 0.1 B -0.3 -0.2 gn: 10 10 2010-May-24 20:50:01 INFO3 from_mock: From MOCK: b5s1g0 rms:A 30.8 30.1 B 29.7 29.8 mn:A 0.0 -0.2 B 0.2 0.8 gn: 10 9 2010-May-24 20:50:01 INFO3 from_mock: From MOCK: b6s0g0 rms:A 30.8 28.0 B 29.3 29.7 mn:A -0.4 -0.0 B -0.4 0.5 gn: 12 16 2010-May-24 20:50:01 INFO3 from_mock: From MOCK: b6s1g0 rms:A 32.0 29.2 B 30.6 30.1 mn:A -0.4 0.2 B 0.2 -0.3 gn: 13 17 2010-May-24 20:50:01 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2010-May-24 20:50:01 LOG5 end_task: Level: (5) ID = <10139> Status = 0 0 0 0 ok 2010-May-24 20:50:01 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2010-May-24 20:50:01 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2010-May-24 20:50:01 LOG5 finish_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2010-May-24 20:50:01 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2010-May-24 20:50:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:50:01 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2010-May-24 20:50:01 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2010-May-24 20:50:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-24 20:50:01 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2010-May-24 20:50:01 LOG5 finish_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-May-24 20:50:01 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2010-May-24 20:50:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:50:01 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2010-May-24 20:50:01 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-May-24 20:50:01 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-24 20:50:01 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-24 20:50:01 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-24 20:50:01 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-24 20:50:01 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2010-May-24 20:50:01 START begin_task: Starting task 'WAPP+Mock calibration' 2010-May-24 20:50:01 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2010-May-24 20:50:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2010-May-24 20:50:01 START begin_task: Starting task 'selecting calibration type' 2010-May-24 20:50:01 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2010-May-24 20:50:01 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-24 20:50:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-24 20:50:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:50:01 START begin_task: Starting task 'waiting on setcal' 2010-May-24 20:50:01 LOG5 begin_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2010-May-24 20:50:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-24 20:50:01 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-24 20:50:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 20:50:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:50:01 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 20:50:01 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-24 20:50:01 LOG5 end_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2010-May-24 20:50:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-24 20:50:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 20:50:01 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-24 20:50:01 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 20:50:01 LOG5 begin_task: Level: (5) ID = <10143> Status = 0 0 0 0 ok 2010-May-24 20:50:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:50:01 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 20:50:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 20:50:01 LOG5 end_task: Level: (5) ID = <10143> Status = 0 0 0 0 ok 2010-May-24 20:50:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 20:50:01 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-24 20:50:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 20:50:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-24 20:50:02 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 20:50:02 LOG5 begin_task: Level: (5) ID = <10144> Status = 0 0 0 0 ok 2010-May-24 20:50:02 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 20:50:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 20:50:02 LOG5 end_task: Level: (5) ID = <10144> Status = 0 0 0 0 ok 2010-May-24 20:50:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 20:50:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-24 20:50:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-24 20:50:02 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2010-May-24 20:50:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-24 20:50:02 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-24 20:50:02 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-24 20:50:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 20:50:02 LOG5 begin_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2010-May-24 20:50:02 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 20:50:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-24 20:50:02 NOTE WAPPDATA-new_file: New FITS file: wapp.20100524.a2048.0002.fits 2010-May-24 20:50:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 20:50:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 20:50:02 LOG5 end_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2010-May-24 20:50:02 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-24 20:50:02 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-May-24 20:50:02 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2010-May-24 20:50:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-24 20:50:02 LOG5 log_alfabeam: Parameters: 12.537138888888888 8.0228055555555589 12.550413 2010.3966271516213 19.099895 2010-May-24 20:50:02 LOG4 log_alfabeam: ALFABEAM 0 12.537138888888890 8.022805555555559 2010-May-24 20:50:02 LOG4 log_alfabeam: ALFABEAM 1 12.536030999054608 8.127668682798031 2010-May-24 20:50:02 LOG4 log_alfabeam: ALFABEAM 2 12.531357689639179 8.058595915228473 2010-May-24 20:50:02 LOG4 log_alfabeam: ALFABEAM 3 12.532427880418430 7.953627985204425 2010-May-24 20:50:02 LOG4 log_alfabeam: ALFABEAM 4 12.538269421460949 7.917968017196516 2010-May-24 20:50:02 LOG4 log_alfabeam: ALFABEAM 5 12.542958023505744 7.987703554365703 2010-May-24 20:50:02 LOG4 log_alfabeam: ALFABEAM 6 12.541789835095445 8.092431447669247 2010-May-24 20:50:02 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-May-24 20:50:02 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-May-24 20:50:02 LOG3 take_mock_data: PSET configuration: obsnm=RT 2010-May-24 20:50:02 LOG3 take_mock_data: PSET configuration: object=AGESVC1B_p2_040 2010-May-24 20:50:02 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-May-24 20:50:02 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-May-24 20:50:02 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-May-24 20:50:02 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-May-24 20:50:02 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-May-24 20:50:02 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-May-24 20:50:02 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2010-May-24 20:50:02 LOG3 take_mock_data: PSET configuration: scantype=ON 2010-May-24 20:50:02 LOG3 take_mock_data: PSET configuration: patternid=14400116 2010-May-24 20:50:02 LOG3 take_mock_data: PSET configuration: scanid=14400117 2010-May-24 20:50:02 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-May-24 20:50:02 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-May-24 20:50:02 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-May-24 20:50:02 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456129539.0 2010-May-24 20:50:02 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306129539.0 2010-May-24 20:50:02 LOG3 take_mock_data: PSET configuration: filetype=1 2010-May-24 20:50:02 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-May-24 20:50:02 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=RT:object=AGESVC1B_p2_040:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=14400116:scanid=14400117:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456129539.0:topobfreqhz=1306129539.0:filetype=1 2010-May-24 20:50:02 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-May-24 20:50:02 LOG5 begin_task: Level: (5) ID = <10147> Status = 0 0 0 0 ok 2010-May-24 20:50:02 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100524.a2048.0002.fits} 2010-May-24 20:50:02 LOG4 from_mock: From MOCK: psetok 2010-May-24 20:50:02 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-May-24 20:50:02 LOG5 end_task: Level: (5) ID = <10147> Status = 0 0 0 0 ok 2010-May-24 20:50:02 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-May-24 20:50:02 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-May-24 20:50:02 LOG3 socket_wait: To MOCK: STAR5 2010-May-24 20:50:02 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-May-24 20:50:02 LOG5 begin_task: Level: (5) ID = <10148> Status = 0 0 0 0 ok 2010-May-24 20:50:02 LOG4 from_mock: From MOCK: starok 2010-May-24 20:50:02 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-May-24 20:50:02 LOG5 end_task: Level: (5) ID = <10148> Status = 0 0 0 0 ok 2010-May-24 20:50:02 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-May-24 20:50:02 INFO2 take_data: Starting WAPP+Mock 5-second scan: 14400117 2010-May-24 20:50:03 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-May-24 20:50:03 LOG5 begin_task: Level: (5) ID = <10149> Status = 0 0 0 0 ok 2010-May-24 20:50:03 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-May-24 20:50:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 20:50:03 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-May-24 20:50:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-24 20:50:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3004.00 2010-May-24 20:50:05 INFO2 got_mock_message: Mock spectrometer start file number is 00300 2010-May-24 20:50:05 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-May-24 20:50:05 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2010-May-24 20:50:05 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2010-May-24 20:50:05 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-May-24 20:50:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-May-24 20:50:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-May-24 20:50:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-May-24 20:50:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-May-24 20:50:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-May-24 20:50:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-May-24 20:50:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-May-24 20:50:05 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-May-24 20:50:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2010-May-24 20:50:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2010-May-24 20:50:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2010-May-24 20:50:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2010-May-24 20:50:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2010-May-24 20:50:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2010-May-24 20:50:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2010-May-24 20:50:08 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 20:50:08.01 2010-May-24 20:50:08 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1274748608.01 Mon May 24 20:50:08 2010 2010-May-24 20:50:08 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-May-24 20:50:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.129539 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 20:50:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.129539 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 20:50:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.129539 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 20:50:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.129539 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 20:50:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.129539 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 20:50:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.129539 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 20:50:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.129539 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 20:50:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.129539 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 20:50:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.129539 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 20:50:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 20:50:14 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-May-24 20:50:14 INFO1 got_mock_message: From MOCK: DONE with observation 2010-May-24 20:50:14 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-May-24 20:50:14 LOG5 end_task: Level: (5) ID = <10149> Status = 0 0 0 0 ok 2010-May-24 20:50:14 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-May-24 20:50:14 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2010-May-24 20:50:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-24 20:50:14 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-24 20:50:14 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-24 20:50:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 20:50:14 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2010-May-24 20:50:14 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 20:50:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-24 20:50:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 20:50:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 20:50:14 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2010-May-24 20:50:14 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2010-May-24 20:50:14 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-May-24 20:50:14 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2010-May-24 20:50:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2010-May-24 20:50:14 LOG5 log_alfabeam: Parameters: 12.537138888888888 8.0228055555555589 12.553756 2010.3966275318783 19.099895 2010-May-24 20:50:14 LOG4 log_alfabeam: ALFABEAM 0 12.537138888889361 8.022805555555562 2010-May-24 20:50:14 LOG4 log_alfabeam: ALFABEAM 1 12.536063539274281 8.127743369971112 2010-May-24 20:50:14 LOG4 log_alfabeam: ALFABEAM 2 12.531368847791470 8.058991063590266 2010-May-24 20:50:14 LOG4 log_alfabeam: ALFABEAM 3 12.532406479778230 7.953951030723915 2010-May-24 20:50:14 LOG4 log_alfabeam: ALFABEAM 4 12.538236904557449 7.917891778975863 2010-May-24 20:50:14 LOG4 log_alfabeam: ALFABEAM 5 12.542947073096324 7.987305774228528 2010-May-24 20:50:14 LOG4 log_alfabeam: ALFABEAM 6 12.541811381567133 8.092112487446819 2010-May-24 20:50:14 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-May-24 20:50:14 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-May-24 20:50:14 LOG3 take_mock_data: PSET configuration: obsnm=RT 2010-May-24 20:50:14 LOG3 take_mock_data: PSET configuration: object=AGESVC1B_p2_040 2010-May-24 20:50:14 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-May-24 20:50:14 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-May-24 20:50:14 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-May-24 20:50:14 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-May-24 20:50:14 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-May-24 20:50:14 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-May-24 20:50:14 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2010-May-24 20:50:14 LOG3 take_mock_data: PSET configuration: scantype=OFF 2010-May-24 20:50:14 LOG3 take_mock_data: PSET configuration: patternid=14400116 2010-May-24 20:50:14 LOG3 take_mock_data: PSET configuration: scanid=14400118 2010-May-24 20:50:14 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-May-24 20:50:14 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-May-24 20:50:14 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-May-24 20:50:14 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456129539.0 2010-May-24 20:50:14 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306129539.0 2010-May-24 20:50:14 LOG3 take_mock_data: PSET configuration: filetype=1 2010-May-24 20:50:14 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-May-24 20:50:14 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=RT:object=AGESVC1B_p2_040:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=14400116:scanid=14400118:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456129539.0:topobfreqhz=1306129539.0:filetype=1 2010-May-24 20:50:14 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-May-24 20:50:14 LOG5 begin_task: Level: (5) ID = <10152> Status = 0 0 0 0 ok 2010-May-24 20:50:14 LOG4 from_mock: From MOCK: psetok 2010-May-24 20:50:14 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-May-24 20:50:14 LOG5 end_task: Level: (5) ID = <10152> Status = 0 0 0 0 ok 2010-May-24 20:50:14 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-May-24 20:50:14 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-May-24 20:50:14 LOG3 socket_wait: To MOCK: STAR5 2010-May-24 20:50:14 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-May-24 20:50:14 LOG5 begin_task: Level: (5) ID = <10153> Status = 0 0 0 0 ok 2010-May-24 20:50:14 LOG4 from_mock: From MOCK: starok 2010-May-24 20:50:14 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-May-24 20:50:14 LOG5 end_task: Level: (5) ID = <10153> Status = 0 0 0 0 ok 2010-May-24 20:50:14 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-May-24 20:50:14 INFO2 take_data: Starting WAPP+Mock 5-second scan: 14400118 2010-May-24 20:50:14 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-May-24 20:50:14 LOG5 begin_task: Level: (5) ID = <10154> Status = 0 0 0 0 ok 2010-May-24 20:50:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 20:50:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2010-May-24 20:50:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3015.00 2010-May-24 20:50:15 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-May-24 20:50:15 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-May-24 20:50:17 INFO2 got_mock_message: Mock spectrometer start file number is 00400 2010-May-24 20:50:17 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-May-24 20:50:17 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2010-May-24 20:50:17 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2010-May-24 20:50:17 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-May-24 20:50:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-May-24 20:50:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-May-24 20:50:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-May-24 20:50:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-May-24 20:50:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-May-24 20:50:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-May-24 20:50:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-May-24 20:50:17 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-May-24 20:50:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2010-May-24 20:50:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2010-May-24 20:50:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2010-May-24 20:50:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2010-May-24 20:50:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2010-May-24 20:50:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2010-May-24 20:50:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2010-May-24 20:50:20 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 20:50:20.01 2010-May-24 20:50:20 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1274748620.01 Mon May 24 20:50:20 2010 2010-May-24 20:50:20 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-May-24 20:50:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.129539 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 20:50:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.129539 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 20:50:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.129539 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 20:50:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.129539 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 20:50:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.129539 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 20:50:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.129539 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 20:50:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.129539 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 20:50:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.129539 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 20:50:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.129539 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 20:50:20 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2010-May-24 20:50:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 20:50:25 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-May-24 20:50:26 INFO1 got_mock_message: From MOCK: DONE with observation 2010-May-24 20:50:26 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-May-24 20:50:26 LOG5 end_task: Level: (5) ID = <10154> Status = 0 0 0 0 ok 2010-May-24 20:50:26 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-May-24 20:50:26 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2010-May-24 20:50:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-24 20:50:26 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2010-May-24 20:50:26 LOG5 finish_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2010-May-24 20:50:26 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2010-May-24 20:50:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:50:26 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2010-May-24 20:50:26 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2010-May-24 20:50:26 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2010-May-24 20:50:26 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 0.00 and ZA = 10.39 2010-May-24 20:50:26 LOG3 track_source: Calling 'track_source AGESVC1B_p2_040 0.00 10.3883017698 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-24 20:50:26 START begin_task: Starting task 'sending tracking commands' 2010-May-24 20:50:26 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-May-24 20:50:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_040} INFO {Slewing to source 'AGESVC1B_p2_040' ...} 2010-May-24 20:50:26 INFO1 track_source: Starting to track AGESVC1B_p2_040 2010-May-24 20:50:26 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_040" 2010-May-24 20:50:26 LOG3 vw_send: To DATATAKING: set ra 0.00 2010-May-24 20:50:26 LOG3 vw_send: To DATATAKING: set dec 10.3883017698 2010-May-24 20:50:26 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-24 20:50:26 LOG3 vw_send: To DATATAKING: pnt tr 0.00 10.3883017698 -CF 2010-May-24 20:50:26 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:50:26 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-24 20:50:26 LOG5 finish_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-May-24 20:50:26 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-24 20:50:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 20:50:26 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-24 20:50:26 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-May-24 20:50:26 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 12:29:33.4 LST = 12:33:25.6 diff = -232.2 secs 2010-May-24 20:50:26 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2010-May-24 20:50:26 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2010-May-24 20:50:26 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-May-24 20:50:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2010-May-24 20:50:26 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-24 20:50:26 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-May-24 20:50:26 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2010-May-24 20:50:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-24 20:50:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-24 20:50:26 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-May-24 20:50:26 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-May-24 20:50:26 LOG3 take_mock_data: PSET configuration: obsnm=RT 2010-May-24 20:50:26 LOG3 take_mock_data: PSET configuration: object=AGESVC1B_p2_040 2010-May-24 20:50:26 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-May-24 20:50:26 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-May-24 20:50:26 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-May-24 20:50:26 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-May-24 20:50:26 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-May-24 20:50:26 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-May-24 20:50:26 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2010-May-24 20:50:26 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2010-May-24 20:50:26 LOG3 take_mock_data: PSET configuration: patternid=14400119 2010-May-24 20:50:26 LOG3 take_mock_data: PSET configuration: scanid=14400119 2010-May-24 20:50:26 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-May-24 20:50:26 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-May-24 20:50:26 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-May-24 20:50:26 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456129539.0 2010-May-24 20:50:26 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306129539.0 2010-May-24 20:50:26 LOG3 take_mock_data: PSET configuration: filetype=1 2010-May-24 20:50:26 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-May-24 20:50:26 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=RT:object=AGESVC1B_p2_040:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=14400119:scanid=14400119:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456129539.0:topobfreqhz=1306129539.0:filetype=1 2010-May-24 20:50:26 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-May-24 20:50:26 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2010-May-24 20:50:26 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_040" 2010-May-24 20:50:26 LOG4 got_cormsg: From DATATAKING: set ra 0.00 2010-May-24 20:50:26 LOG4 got_cormsg: From DATATAKING: set dec 10.3883017698 2010-May-24 20:50:26 LOG4 from_mock: From MOCK: psetok 2010-May-24 20:50:26 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-May-24 20:50:26 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2010-May-24 20:50:26 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-May-24 20:50:26 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-May-24 20:50:26 LOG3 socket_wait: To MOCK: STAR1200 2010-May-24 20:50:26 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-May-24 20:50:26 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2010-May-24 20:50:26 LOG4 got_cormsg: From DATATAKING: vw% 0.00 2010-May-24 20:50:26 LOG4 got_cormsg: From DATATAKING: vw% 10.3883017698 2010-May-24 20:50:26 LOG4 from_mock: From MOCK: starok 2010-May-24 20:50:26 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-May-24 20:50:26 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2010-May-24 20:50:26 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-May-24 20:50:26 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 14400119 2010-May-24 20:50:27 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-May-24 20:50:27 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2010-May-24 20:50:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:50:27 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-May-24 20:50:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 20:50:27 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-24 20:50:27 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-May-24 20:50:27 LOG4 got_cormsg: From DATATAKING: pnt tr 0.00 10.3883017698 -CF 2010-May-24 20:50:27 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-24 20:50:27 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-24 20:50:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 20:50:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-24 20:50:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3028.00 2010-May-24 20:50:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.129539 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 20:50:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.129539 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 20:50:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.129539 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 20:50:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.129539 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 20:50:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.129539 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 20:50:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.129539 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 20:50:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.129539 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 20:50:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.129539 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 20:50:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.129539 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 20:50:29 INFO2 got_mock_message: Mock spectrometer start file number is 00500 2010-May-24 20:50:29 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-May-24 20:50:29 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2010-May-24 20:50:29 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2010-May-24 20:50:29 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-May-24 20:50:29 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-May-24 20:50:29 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-May-24 20:50:29 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-May-24 20:50:29 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-May-24 20:50:29 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-May-24 20:50:29 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-May-24 20:50:29 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-May-24 20:50:29 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-May-24 20:50:29 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.16 GB 2010-May-24 20:50:29 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.16 GB 2010-May-24 20:50:29 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.16 GB 2010-May-24 20:50:29 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.16 GB 2010-May-24 20:50:29 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.16 GB 2010-May-24 20:50:29 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.16 GB 2010-May-24 20:50:29 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.16 GB 2010-May-24 20:50:30 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2010-May-24 20:50:32 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 20:50:32.02 2010-May-24 20:50:32 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1274748632.02 Mon May 24 20:50:32 2010 2010-May-24 20:50:32 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-May-24 20:50:42 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2010-May-24 21:10:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 21:10:33 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-May-24 21:10:33 INFO1 got_mock_message: From MOCK: DONE with observation 2010-May-24 21:10:33 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-May-24 21:10:33 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2010-May-24 21:10:33 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-May-24 21:10:33 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2010-May-24 21:10:33 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-May-24 21:10:33 LOG5 finish_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2010-May-24 21:10:33 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2010-May-24 21:10:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-24 21:10:33 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2010-May-24 21:10:33 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2010-May-24 21:10:33 COMMAND run_command_line: EXECUTING command 50: 'ENDIF' 2010-May-24 21:10:33 ERROR run_command_line: ERROR found an 'ENDIF' without matching 'IF'! 2010-May-24 21:10:33 LOG1 task_failed: Task 'running command file '100524.cmd'' failed! 2010-May-24 21:10:33 LOG5 task_failed: Level: (1) ID = <10118> Status = 0 0 0 0 ok 2010-May-24 21:10:33 ALERT run_command_file: Stopping command file processing at line 50! 2010-May-24 21:10:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-May-24 21:10:33 STOP finish_task: Finishing task 'running command file '100524.cmd'' 2010-May-24 21:10:33 LOG5 finish_task: Level: (1) ID = <10118> Status = 0 0 0 1 failed 2010-May-24 21:10:33 ERROR finish_task: ERROR failed running: command file '100524.cmd' 2010-May-24 21:10:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-May-24 21:10:33 END end_task: Finishing task 'running command file '100524.cmd'' with status 'FAILED' 2010-May-24 21:10:33 LOG5 end_task: Level: (1) ID = <10118> Status = 0 0 0 1 failed 2010-May-24 21:10:37 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-May-24 21:10:37 LOG4 exec_msg: From OBSERVER: run_command_file 100524.cmd 54 1 28 2010-May-24 21:10:37 LOG4 run_command_file: Calling 'run_command_file 100524.cmd 54 1 28' 2010-May-24 21:10:37 BEGIN begin_task: Starting task 'running command file '100524.cmd'' 2010-May-24 21:10:37 LOG5 begin_task: Level: (1) ID = <10160> Status = 0 0 0 0 ok 2010-May-24 21:10:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100524.cmd' ...} 2010-May-24 21:10:37 NOTE run_command_file: Starting execution of command file '100524.cmd' from line 54 2010-May-24 21:10:37 COMMAND run_command_line: EXECUTING command 54: 'FIXEDDRIFT az=31.42 alfaangle=-7.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_001 ra=122900.00 dec=90000.00' 2010-May-24 21:10:37 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-May-24 21:10:38 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-24 21:10:38 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 31.42 -7.3 hcorcal 5 tracking no off lcorcal first 1 AGESVC1B_p3_001 122900.00 90000.00 J 8500.0 Heliocentric velocity(optical)' 2010-May-24 21:10:38 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-May-24 21:10:38 LOG5 begin_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2010-May-24 21:10:38 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGESVC1B_p2_040' 2010-May-24 21:10:38 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-May-24 21:10:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p3_001} 2010-May-24 21:10:38 INFO3 fixed_driftmap: Sending telescope to Az = 31.42 and ZA = 10.94 2010-May-24 21:10:38 LOG3 track_source: Calling 'track_source AGESVC1B_p3_001 31.42 10.9424498420 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-24 21:10:38 START begin_task: Starting task 'sending tracking commands' 2010-May-24 21:10:38 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-May-24 21:10:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_001} INFO {Slewing to source 'AGESVC1B_p3_001' ...} 2010-May-24 21:10:38 INFO1 track_source: Starting to track AGESVC1B_p3_001 2010-May-24 21:10:38 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_001" 2010-May-24 21:10:38 LOG3 vw_send: To DATATAKING: set ra 31.42 2010-May-24 21:10:38 LOG3 vw_send: To DATATAKING: set dec 10.9424498420 2010-May-24 21:10:38 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-24 21:10:38 LOG3 vw_send: To DATATAKING: pnt tr 31.42 10.9424498420 -CF 2010-May-24 21:10:38 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-24 21:10:38 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-24 21:10:38 LOG5 finish_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-May-24 21:10:38 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-24 21:10:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 21:10:38 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-24 21:10:38 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-May-24 21:10:38 START begin_task: Starting task 'rotate ALFA to -7.3 degrees' 2010-May-24 21:10:38 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2010-May-24 21:10:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -7.3 degrees ...} 2010-May-24 21:10:38 INFO2 rotate_alfa: ALFA commanded to -7.3 degrees 2010-May-24 21:10:38 LOG3 sock_errsend: To ALFAMOTOR: POSITION -7.3 REPLY 2010-May-24 21:10:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-May-24 21:10:38 START begin_task: Starting task 'waiting on ALFA rotation' 2010-May-24 21:10:38 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2010-May-24 21:10:38 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_001" 2010-May-24 21:10:38 LOG4 got_cormsg: From DATATAKING: set ra 31.42 2010-May-24 21:10:38 LOG4 got_cormsg: From DATATAKING: set dec 10.9424498420 2010-May-24 21:10:38 LOG4 got_cormsg: From DATATAKING: vw% 31.42 2010-May-24 21:10:38 LOG4 got_cormsg: From DATATAKING: vw% 10.9424498420 2010-May-24 21:10:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 21:10:38 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-24 21:10:38 LOG4 got_cormsg: From DATATAKING: pnt tr 31.42 10.9424498420 -CF 2010-May-24 21:10:38 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-24 21:10:38 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-24 21:10:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 21:10:54 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-May-24 21:10:54 INFO3 alfa_motor: ALFA rotator in-position -7.30 degrees 2010-May-24 21:10:54 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-May-24 21:10:54 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2010-May-24 21:10:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 21:10:54 STOP finish_task: Finishing task 'rotate ALFA to -7.3 degrees' 2010-May-24 21:10:54 LOG5 finish_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2010-May-24 21:10:54 INFO2 finish_task: DONE finished configuration: rotating ALFA to -7.3 degrees 2010-May-24 21:10:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 21:10:54 STOP end_task: Finishing task 'rotate ALFA to -7.3 degrees' with status 'OK' 2010-May-24 21:10:54 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2010-May-24 21:10:55 START begin_task: Starting task 'waiting on telescope' 2010-May-24 21:10:55 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2010-May-24 21:10:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-24 21:10:55 LOG3 waittrk: Start waittrk 5 2010-May-24 21:10:55 START begin_task: Starting task 'waiting on telescope movement' 2010-May-24 21:10:55 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2010-May-24 21:11:00 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-24 21:11:00 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2010-May-24 21:11:00 START begin_task: Starting task 'waiting on telescope on source' 2010-May-24 21:11:00 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2010-May-24 21:12:09 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-24 21:12:09 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2010-May-24 21:12:09 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 21:12:09 INFO2 waittrk: Now tracking AGESVC1B_p3_001 2010-May-24 21:12:09 LOG4 waittrk: Current telescope position: Az = 391.17 ZA = 10.92 2010-May-24 21:12:09 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-24 21:12:09 LOG5 finish_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2010-May-24 21:12:09 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-24 21:12:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 21:12:09 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-24 21:12:09 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2010-May-24 21:12:09 START begin_task: Starting task 'selecting calibration type' 2010-May-24 21:12:09 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2010-May-24 21:12:09 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-24 21:12:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-24 21:12:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 21:12:10 START begin_task: Starting task 'waiting on setcal' 2010-May-24 21:12:10 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2010-May-24 21:12:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-24 21:12:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 21:12:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 21:12:11 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 21:12:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-24 21:12:11 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2010-May-24 21:12:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-24 21:12:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 21:12:11 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-24 21:12:11 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 21:12:11 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2010-May-24 21:12:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 21:12:11 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 21:12:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 21:12:11 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2010-May-24 21:12:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 21:12:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-24 21:12:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 21:12:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-24 21:12:11 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 21:12:11 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2010-May-24 21:12:11 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 21:12:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 21:12:11 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2010-May-24 21:12:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 21:12:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-24 21:12:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-24 21:12:11 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2010-May-24 21:12:11 LOG5 dopset_later: Calling 'dopset_later 0' 2010-May-24 21:12:11 INFO3 dopset_later: Setting Doppler correction now 2010-May-24 21:12:11 LOG5 antvel: Calling 'antvel 31.420000 10.942450 F Heliocentric 0' 2010-May-24 21:12:11 LOG2 antvel: Transforming current Az = 31.42 ZA = 10.94 to apparent RA = 12:32:15.3 Dec = +08:56:26.1 2010-May-24 21:12:11 LOG2 antvel: Parameters to Doppler: Heliocentric 90731 2010 144 0.0 2010-May-24 21:12:11 INFO5 antvel: Computed antenna velocity: +24.82787 km/s 2010-May-24 21:12:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=24.8278748171 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-May-24 21:12:11 INFO4 dopset_gen: New sky frequencies: 1381.129048 1381.129048 1381.129048 1381.129048 1381.129048 1381.129048 1381.129048 1381.129048 1381.129048 2010-May-24 21:12:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.129048 sky0=1381.129048 sky1=1381.129048 sky2=1381.129048 sky3=1381.129048 sky4=1381.129048 sky5=1381.129048 sky6=1381.129048 sky7=1381.129048 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-24 21:12:11 LOG2 dopset_gen: Result from 'sky2syn': 1631.129048 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-24 21:12:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631129048.0} 2010-May-24 21:12:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 21:12:11 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2010-May-24 21:12:11 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2010-May-24 21:12:11 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:31:46.7 Dec = +08:59:52.5 2010-May-24 21:12:11 LOG3 track_source: Calling 'track_source AGESVC1B_p3_001 123146.7 085952.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-24 21:12:11 START begin_task: Starting task 'sending tracking commands' 2010-May-24 21:12:11 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2010-May-24 21:12:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_001} INFO {Slewing to source 'AGESVC1B_p3_001' ...} 2010-May-24 21:12:11 INFO1 track_source: Starting to track AGESVC1B_p3_001 2010-May-24 21:12:11 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_001" 2010-May-24 21:12:11 LOG3 vw_send: To DATATAKING: set ra 123146.7 2010-May-24 21:12:11 LOG3 vw_send: To DATATAKING: set dec 085952.5 2010-May-24 21:12:11 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-24 21:12:11 LOG3 vw_send: To DATATAKING: pnt tr 123146.7 085952.5 -CJ 2010-May-24 21:12:11 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-24 21:12:11 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-24 21:12:11 LOG5 finish_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2010-May-24 21:12:11 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-24 21:12:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 21:12:11 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-24 21:12:11 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2010-May-24 21:12:11 START begin_task: Starting task 'waiting on telescope' 2010-May-24 21:12:11 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-May-24 21:12:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-24 21:12:11 LOG3 waittrk: Start waittrk 5 2010-May-24 21:12:11 START begin_task: Starting task 'waiting on telescope movement' 2010-May-24 21:12:11 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2010-May-24 21:12:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631129048.0} 2010-May-24 21:12:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-24 21:12:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 21:12:11 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_001" 2010-May-24 21:12:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 21:12:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 21:12:11 LOG4 got_cormsg: From DATATAKING: set ra 123146.7 2010-May-24 21:12:12 LOG4 got_cormsg: From DATATAKING: set dec 085952.5 2010-May-24 21:12:12 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-24 21:12:12 LOG4 got_cormsg: From DATATAKING: pnt tr 123146.7 085952.5 -CJ 2010-May-24 21:12:12 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-24 21:12:12 LOG4 got_cormsg: From DATATAKING: 123146.7 2010-May-24 21:12:12 LOG4 got_cormsg: From DATATAKING: vw% 085952.5 2010-May-24 21:12:12 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2010-May-24 21:12:16 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-24 21:12:16 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2010-May-24 21:12:17 START begin_task: Starting task 'waiting on telescope on source' 2010-May-24 21:12:17 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2010-May-24 21:12:19 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-24 21:12:19 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2010-May-24 21:12:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-24 21:12:19 INFO2 waittrk: Now tracking AGESVC1B_p3_001 2010-May-24 21:12:19 LOG4 waittrk: Current telescope position: Az = 391.23 ZA = 10.93 2010-May-24 21:12:19 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-24 21:12:19 LOG5 finish_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-May-24 21:12:19 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-24 21:12:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 21:12:19 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-24 21:12:19 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-May-24 21:12:19 START begin_task: Starting task 'adjusting WAPP+Mock power' 2010-May-24 21:12:19 LOG5 begin_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2010-May-24 21:12:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2010-May-24 21:12:19 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2010-May-24 21:12:19 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-May-24 21:12:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-May-24 21:12:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 21:12:19 START begin_task: Starting task 'waiting on adjpwrif2' 2010-May-24 21:12:19 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2010-May-24 21:12:19 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-May-24 21:12:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 21:12:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 21:12:22 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 21:12:22 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-May-24 21:12:22 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2010-May-24 21:12:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-May-24 21:12:22 START begin_task: Starting task 'adjusting WAPP power' 2010-May-24 21:12:22 LOG5 begin_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2010-May-24 21:12:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-24 21:12:22 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 21:12:22 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 21:12:22 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 21:12:22 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-May-24 21:12:22 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-May-24 21:12:22 LOG5 begin_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2010-May-24 21:12:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-May-24 21:12:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 21:12:22 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-May-24 21:12:22 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 5 dB 2010-May-24 21:12:22 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 4 3 dB 2010-May-24 21:12:22 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-May-24 21:12:22 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-May-24 21:12:22 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-May-24 21:12:22 LOG5 end_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2010-May-24 21:12:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.982 0.969 ALFA beam 1: 1.057 1.060 2010-May-24 21:12:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.004 0.961 ALFA beam 3: 0.939 1.022 2010-May-24 21:12:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.939 0.931 ALFA beam 5: 0.979 1.019 2010-May-24 21:12:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.982 0.919 ALFA beam 7: 1.069 1.072 2010-May-24 21:12:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-24 21:12:22 LOG5 finish_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2010-May-24 21:12:22 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-May-24 21:12:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 21:12:23 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-24 21:12:23 LOG5 end_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2010-May-24 21:12:23 START begin_task: Starting task 'adjusting Mock spectrometer power' 2010-May-24 21:12:23 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2010-May-24 21:12:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-24 21:12:23 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2010-May-24 21:12:23 LOG3 socket_wait: To MOCK: ADJP30 2010-May-24 21:12:23 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2010-May-24 21:12:23 LOG5 begin_task: Level: (5) ID = <10181> Status = 0 0 0 0 ok 2010-May-24 21:12:30 INFO3 from_mock: From MOCK: b0s0g0 rms:A 30.1 26.6 B 29.0 29.0 mn:A -0.5 -0.8 B -0.9 -0.9 gn: 9 10 2010-May-24 21:12:30 INFO3 from_mock: From MOCK: b0s1g0 rms:A 30.1 28.8 B 30.2 31.9 mn:A 0.8 -0.7 B 0.3 0.2 gn: 10 11 2010-May-24 21:12:30 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.5 29.6 B 32.8 29.5 mn:A 0.0 0.5 B 0.0 1.5 gn: 9 10 2010-May-24 21:12:30 INFO3 from_mock: From MOCK: b1s1g0 rms:A 32.0 29.4 B 29.5 29.5 mn:A 0.1 0.5 B -0.5 0.0 gn: 10 9 2010-May-24 21:12:30 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.7 28.8 B 28.0 29.2 mn:A 0.1 -0.2 B 0.1 0.1 gn: 12 11 2010-May-24 21:12:30 INFO3 from_mock: From MOCK: b2s1g0 rms:A 31.2 31.5 B 32.2 29.9 mn:A -0.1 -0.5 B -0.1 0.1 gn: 14 12 2010-May-24 21:12:30 INFO3 from_mock: From MOCK: b3s0g0 rms:A 30.3 30.2 B 33.0 29.5 mn:A 0.4 -0.2 B 0.2 -0.3 gn: 11 12 2010-May-24 21:12:30 INFO3 from_mock: From MOCK: b3s1g0 rms:A 31.6 30.8 B 27.8 28.9 mn:A 0.1 -0.1 B -0.3 0.4 gn: 11 11 2010-May-24 21:12:30 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.6 29.6 B 30.4 30.6 mn:A 0.5 -0.4 B -0.1 0.3 gn: 10 14 2010-May-24 21:12:30 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.5 29.5 B 30.4 29.2 mn:A -0.4 -0.7 B 0.6 -0.7 gn: 12 17 2010-May-24 21:12:30 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.3 28.9 B 31.2 31.1 mn:A 0.2 0.2 B -0.2 -0.2 gn: 10 10 2010-May-24 21:12:30 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.7 29.1 B 29.2 29.4 mn:A 0.1 -0.1 B 0.3 0.9 gn: 10 9 2010-May-24 21:12:30 INFO3 from_mock: From MOCK: b6s0g0 rms:A 31.3 28.6 B 29.4 29.9 mn:A -0.4 -0.1 B -0.3 0.5 gn: 12 16 2010-May-24 21:12:30 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.4 27.7 B 29.4 28.9 mn:A -0.4 0.2 B 0.2 -0.4 gn: 13 17 2010-May-24 21:12:30 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2010-May-24 21:12:30 LOG5 end_task: Level: (5) ID = <10181> Status = 0 0 0 0 ok 2010-May-24 21:12:30 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2010-May-24 21:12:30 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2010-May-24 21:12:30 LOG5 finish_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2010-May-24 21:12:30 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2010-May-24 21:12:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 21:12:30 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2010-May-24 21:12:30 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2010-May-24 21:12:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-24 21:12:30 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2010-May-24 21:12:30 LOG5 finish_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2010-May-24 21:12:30 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2010-May-24 21:12:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 21:12:30 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2010-May-24 21:12:30 LOG5 end_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2010-May-24 21:12:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-24 21:12:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-24 21:12:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-24 21:12:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-24 21:12:30 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2010-May-24 21:12:30 START begin_task: Starting task 'WAPP+Mock calibration' 2010-May-24 21:12:30 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2010-May-24 21:12:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2010-May-24 21:12:30 START begin_task: Starting task 'selecting calibration type' 2010-May-24 21:12:30 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2010-May-24 21:12:30 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-24 21:12:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-24 21:12:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-24 21:12:30 START begin_task: Starting task 'waiting on setcal' 2010-May-24 21:12:30 LOG5 begin_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2010-May-24 21:12:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-24 21:12:30 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-24 21:12:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-24 21:12:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 21:12:31 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-24 21:12:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-24 21:12:31 LOG5 end_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2010-May-24 21:12:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-24 21:12:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 21:12:31 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-24 21:12:31 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 21:12:31 LOG5 begin_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2010-May-24 21:12:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 21:12:31 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 21:12:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 21:12:31 LOG5 end_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2010-May-24 21:12:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 21:12:31 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-24 21:12:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-24 21:12:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-24 21:12:31 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-24 21:12:31 LOG5 begin_task: Level: (5) ID = <10186> Status = 0 0 0 0 ok 2010-May-24 21:12:31 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-24 21:12:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-24 21:12:31 LOG5 end_task: Level: (5) ID = <10186> Status = 0 0 0 0 ok 2010-May-24 21:12:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-24 21:12:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-24 21:12:31 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-24 21:12:31 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2010-May-24 21:12:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-24 21:12:31 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-24 21:12:31 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-24 21:12:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 21:12:31 LOG5 begin_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2010-May-24 21:12:31 NOTE WAPPDATA-new_file: New FITS file: wapp.20100524.a2048.0003.fits 2010-May-24 21:12:31 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 21:12:31 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100524.a2048.0003.fits} 2010-May-24 21:12:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-24 21:12:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 21:12:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 21:12:31 LOG5 end_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2010-May-24 21:12:31 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-24 21:12:31 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-May-24 21:12:31 LOG5 begin_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2010-May-24 21:12:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-24 21:12:31 LOG5 log_alfabeam: Parameters: 12.529638888888888 8.997916666666665 12.926440 2010.3966699305397 -7.300069 2010-May-24 21:12:31 LOG4 log_alfabeam: ALFABEAM 0 12.529638888888886 8.997916666666669 2010-May-24 21:12:31 LOG4 log_alfabeam: ALFABEAM 1 12.529337752203977 9.099033384973525 2010-May-24 21:12:31 LOG4 log_alfabeam: ALFABEAM 2 12.523902097948499 9.032422595969189 2010-May-24 21:12:31 LOG4 log_alfabeam: ALFABEAM 3 12.524211506340762 8.931042922766160 2010-May-24 21:12:31 LOG4 log_alfabeam: ALFABEAM 4 12.529998515734148 8.896610485960279 2010-May-24 21:12:31 LOG4 log_alfabeam: ALFABEAM 5 12.535386955864652 8.964140660858250 2010-May-24 21:12:31 LOG4 log_alfabeam: ALFABEAM 6 12.535035721134468 9.065185019928020 2010-May-24 21:12:31 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-May-24 21:12:31 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-May-24 21:12:31 LOG3 take_mock_data: PSET configuration: obsnm=RT 2010-May-24 21:12:31 LOG3 take_mock_data: PSET configuration: object=AGESVC1B_p3_001 2010-May-24 21:12:31 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-May-24 21:12:31 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-May-24 21:12:31 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-May-24 21:12:31 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-May-24 21:12:31 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-May-24 21:12:31 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-May-24 21:12:31 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2010-May-24 21:12:31 LOG3 take_mock_data: PSET configuration: scantype=ON 2010-May-24 21:12:31 LOG3 take_mock_data: PSET configuration: patternid=14400119 2010-May-24 21:12:31 LOG3 take_mock_data: PSET configuration: scanid=14400120 2010-May-24 21:12:31 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-May-24 21:12:31 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-May-24 21:12:31 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-May-24 21:12:31 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456129048.0 2010-May-24 21:12:31 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306129048.0 2010-May-24 21:12:31 LOG3 take_mock_data: PSET configuration: filetype=1 2010-May-24 21:12:31 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-May-24 21:12:31 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=RT:object=AGESVC1B_p3_001:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=14400119:scanid=14400120:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456129048.0:topobfreqhz=1306129048.0:filetype=1 2010-May-24 21:12:31 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-May-24 21:12:31 LOG5 begin_task: Level: (5) ID = <10189> Status = 0 0 0 0 ok 2010-May-24 21:12:31 LOG4 from_mock: From MOCK: psetok 2010-May-24 21:12:31 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-May-24 21:12:31 LOG5 end_task: Level: (5) ID = <10189> Status = 0 0 0 0 ok 2010-May-24 21:12:31 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-May-24 21:12:31 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-May-24 21:12:31 LOG3 socket_wait: To MOCK: STAR5 2010-May-24 21:12:31 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-May-24 21:12:31 LOG5 begin_task: Level: (5) ID = <10190> Status = 0 0 0 0 ok 2010-May-24 21:12:31 LOG4 from_mock: From MOCK: starok 2010-May-24 21:12:31 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-May-24 21:12:31 LOG5 end_task: Level: (5) ID = <10190> Status = 0 0 0 0 ok 2010-May-24 21:12:31 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-May-24 21:12:31 INFO2 take_data: Starting WAPP+Mock 5-second scan: 14400120 2010-May-24 21:12:32 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-May-24 21:12:32 LOG5 begin_task: Level: (5) ID = <10191> Status = 0 0 0 0 ok 2010-May-24 21:12:32 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-May-24 21:12:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 21:12:32 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-May-24 21:12:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-24 21:12:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4353.00 2010-May-24 21:12:35 INFO2 got_mock_message: Mock spectrometer start file number is 00600 2010-May-24 21:12:35 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-May-24 21:12:35 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2010-May-24 21:12:35 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2010-May-24 21:12:35 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-May-24 21:12:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-May-24 21:12:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-May-24 21:12:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-May-24 21:12:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-May-24 21:12:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-May-24 21:12:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-May-24 21:12:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-May-24 21:12:35 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-May-24 21:12:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2010-May-24 21:12:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2010-May-24 21:12:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2010-May-24 21:12:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2010-May-24 21:12:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2010-May-24 21:12:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2010-May-24 21:12:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2010-May-24 21:12:38 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 21:12:38.02 2010-May-24 21:12:38 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1274749958.02 Mon May 24 21:12:38 2010 2010-May-24 21:12:38 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-May-24 21:12:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.129048 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 21:12:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.129048 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 21:12:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.129048 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 21:12:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.129048 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 21:12:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.129048 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 21:12:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.129048 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 21:12:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.129048 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 21:12:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.129048 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 21:12:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.129048 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 21:12:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 21:12:43 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-May-24 21:12:44 INFO1 got_mock_message: From MOCK: DONE with observation 2010-May-24 21:12:44 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-May-24 21:12:44 LOG5 end_task: Level: (5) ID = <10191> Status = 0 0 0 0 ok 2010-May-24 21:12:44 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-May-24 21:12:44 LOG5 end_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2010-May-24 21:12:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-24 21:12:44 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-24 21:12:44 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-24 21:12:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-24 21:12:44 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2010-May-24 21:12:44 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-24 21:12:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-24 21:12:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-24 21:12:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-24 21:12:44 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2010-May-24 21:12:44 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2010-May-24 21:12:44 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-May-24 21:12:44 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2010-May-24 21:12:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2010-May-24 21:12:44 LOG5 log_alfabeam: Parameters: 12.529638888888888 8.997916666666665 12.929782 2010.3966703107967 -7.300069 2010-May-24 21:12:44 LOG4 log_alfabeam: ALFABEAM 0 12.529638888888886 8.997916666666663 2010-May-24 21:12:44 LOG4 log_alfabeam: ALFABEAM 1 12.529362946130025 9.099049430285877 2010-May-24 21:12:44 LOG4 log_alfabeam: ALFABEAM 2 12.523910738180286 9.032735962450326 2010-May-24 21:12:44 LOG4 log_alfabeam: ALFABEAM 3 12.524194880900534 8.931340411663736 2010-May-24 21:12:44 LOG4 log_alfabeam: ALFABEAM 4 12.529973151098265 8.896591685740999 2010-May-24 21:12:44 LOG4 log_alfabeam: ALFABEAM 5 12.535378465139518 8.963824918985987 2010-May-24 21:12:44 LOG4 log_alfabeam: ALFABEAM 6 12.535052522970549 9.064888234320870 2010-May-24 21:12:44 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-May-24 21:12:44 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-May-24 21:12:44 LOG3 take_mock_data: PSET configuration: obsnm=RT 2010-May-24 21:12:44 LOG3 take_mock_data: PSET configuration: object=AGESVC1B_p3_001 2010-May-24 21:12:44 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-May-24 21:12:44 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-May-24 21:12:44 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-May-24 21:12:44 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-May-24 21:12:44 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-May-24 21:12:44 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-May-24 21:12:44 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2010-May-24 21:12:44 LOG3 take_mock_data: PSET configuration: scantype=OFF 2010-May-24 21:12:44 LOG3 take_mock_data: PSET configuration: patternid=14400119 2010-May-24 21:12:44 LOG3 take_mock_data: PSET configuration: scanid=14400121 2010-May-24 21:12:44 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-May-24 21:12:44 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-May-24 21:12:44 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-May-24 21:12:44 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456129048.0 2010-May-24 21:12:44 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306129048.0 2010-May-24 21:12:44 LOG3 take_mock_data: PSET configuration: filetype=1 2010-May-24 21:12:44 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-May-24 21:12:44 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=RT:object=AGESVC1B_p3_001:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=14400119:scanid=14400121:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456129048.0:topobfreqhz=1306129048.0:filetype=1 2010-May-24 21:12:44 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-May-24 21:12:44 LOG5 begin_task: Level: (5) ID = <10194> Status = 0 0 0 0 ok 2010-May-24 21:12:44 LOG4 from_mock: From MOCK: psetok 2010-May-24 21:12:44 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-May-24 21:12:44 LOG5 end_task: Level: (5) ID = <10194> Status = 0 0 0 0 ok 2010-May-24 21:12:44 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-May-24 21:12:44 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-May-24 21:12:44 LOG3 socket_wait: To MOCK: STAR5 2010-May-24 21:12:44 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-May-24 21:12:44 LOG5 begin_task: Level: (5) ID = <10195> Status = 0 0 0 0 ok 2010-May-24 21:12:44 LOG4 from_mock: From MOCK: starok 2010-May-24 21:12:44 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-May-24 21:12:44 LOG5 end_task: Level: (5) ID = <10195> Status = 0 0 0 0 ok 2010-May-24 21:12:44 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-May-24 21:12:44 INFO2 take_data: Starting WAPP+Mock 5-second scan: 14400121 2010-May-24 21:12:44 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-May-24 21:12:44 LOG5 begin_task: Level: (5) ID = <10196> Status = 0 0 0 0 ok 2010-May-24 21:12:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 21:12:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2010-May-24 21:12:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4365.00 2010-May-24 21:12:45 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-May-24 21:12:45 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-May-24 21:12:47 INFO2 got_mock_message: Mock spectrometer start file number is 00700 2010-May-24 21:12:47 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-May-24 21:12:47 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2010-May-24 21:12:47 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2010-May-24 21:12:47 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-May-24 21:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-May-24 21:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-May-24 21:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-May-24 21:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-May-24 21:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-May-24 21:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-May-24 21:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-May-24 21:12:47 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-May-24 21:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2010-May-24 21:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2010-May-24 21:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2010-May-24 21:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2010-May-24 21:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2010-May-24 21:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2010-May-24 21:12:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2010-May-24 21:12:50 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 21:12:50.00 2010-May-24 21:12:50 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1274749970.00 Mon May 24 21:12:50 2010 2010-May-24 21:12:50 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-May-24 21:12:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.129048 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 21:12:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.129048 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 21:12:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.129048 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 21:12:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.129048 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 21:12:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.129048 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 21:12:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.129048 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 21:12:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.129048 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 21:12:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.129048 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 21:12:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.129048 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 21:12:50 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2010-May-24 21:12:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 21:12:55 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-May-24 21:12:56 INFO1 got_mock_message: From MOCK: DONE with observation 2010-May-24 21:12:56 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-May-24 21:12:56 LOG5 end_task: Level: (5) ID = <10196> Status = 0 0 0 0 ok 2010-May-24 21:12:56 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-May-24 21:12:56 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2010-May-24 21:12:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-24 21:12:56 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2010-May-24 21:12:56 LOG5 finish_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2010-May-24 21:12:56 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2010-May-24 21:12:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 21:12:56 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2010-May-24 21:12:56 LOG5 end_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2010-May-24 21:12:56 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2010-May-24 21:12:56 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 31.42 and ZA = 10.94 2010-May-24 21:12:56 LOG3 track_source: Calling 'track_source AGESVC1B_p3_001 31.42 10.9424498420 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-24 21:12:56 START begin_task: Starting task 'sending tracking commands' 2010-May-24 21:12:56 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2010-May-24 21:12:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_001} INFO {Slewing to source 'AGESVC1B_p3_001' ...} 2010-May-24 21:12:56 INFO1 track_source: Starting to track AGESVC1B_p3_001 2010-May-24 21:12:56 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_001" 2010-May-24 21:12:56 LOG3 vw_send: To DATATAKING: set ra 31.42 2010-May-24 21:12:56 LOG3 vw_send: To DATATAKING: set dec 10.9424498420 2010-May-24 21:12:56 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-24 21:12:56 LOG3 vw_send: To DATATAKING: pnt tr 31.42 10.9424498420 -CF 2010-May-24 21:12:56 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-24 21:12:56 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-24 21:12:56 LOG5 finish_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2010-May-24 21:12:56 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-24 21:12:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-24 21:12:56 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-24 21:12:56 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2010-May-24 21:12:56 LOG1 fixed_driftmap: Parameters: HA = +00:22:59.8 Start = 12:52:33.1 LST = 12:55:59.3 diff = -206.1 secs 2010-May-24 21:12:56 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2010-May-24 21:12:56 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2010-May-24 21:12:56 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-May-24 21:12:56 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2010-May-24 21:12:56 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-24 21:12:56 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-May-24 21:12:56 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2010-May-24 21:12:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-24 21:12:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-24 21:12:56 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-May-24 21:12:56 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-May-24 21:12:56 LOG3 take_mock_data: PSET configuration: obsnm=RT 2010-May-24 21:12:56 LOG3 take_mock_data: PSET configuration: object=AGESVC1B_p3_001 2010-May-24 21:12:56 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-May-24 21:12:56 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-May-24 21:12:56 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-May-24 21:12:56 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-May-24 21:12:56 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-May-24 21:12:56 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-May-24 21:12:56 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2010-May-24 21:12:56 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2010-May-24 21:12:56 LOG3 take_mock_data: PSET configuration: patternid=14400122 2010-May-24 21:12:56 LOG3 take_mock_data: PSET configuration: scanid=14400122 2010-May-24 21:12:56 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-May-24 21:12:56 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-May-24 21:12:56 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-May-24 21:12:56 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456129048.0 2010-May-24 21:12:56 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306129048.0 2010-May-24 21:12:56 LOG3 take_mock_data: PSET configuration: filetype=1 2010-May-24 21:12:56 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-May-24 21:12:56 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=RT:object=AGESVC1B_p3_001:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=14400122:scanid=14400122:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456129048.0:topobfreqhz=1306129048.0:filetype=1 2010-May-24 21:12:56 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-May-24 21:12:56 LOG5 begin_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2010-May-24 21:12:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_001" 2010-May-24 21:12:56 LOG4 got_cormsg: From DATATAKING: set ra 31.42 2010-May-24 21:12:56 LOG4 got_cormsg: From DATATAKING: set dec 10.9424498420 2010-May-24 21:12:56 LOG4 from_mock: From MOCK: psetok 2010-May-24 21:12:56 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-May-24 21:12:56 LOG5 end_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2010-May-24 21:12:56 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-May-24 21:12:56 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-May-24 21:12:56 LOG3 socket_wait: To MOCK: STAR1200 2010-May-24 21:12:56 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-May-24 21:12:56 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2010-May-24 21:12:56 LOG4 got_cormsg: From DATATAKING: vw% 31.42 2010-May-24 21:12:56 LOG4 got_cormsg: From DATATAKING: vw% 10.9424498420 2010-May-24 21:12:56 LOG4 from_mock: From MOCK: starok 2010-May-24 21:12:56 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-May-24 21:12:56 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2010-May-24 21:12:56 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-May-24 21:12:56 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 14400122 2010-May-24 21:12:57 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-May-24 21:12:57 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2010-May-24 21:12:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 21:12:57 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-May-24 21:12:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-24 21:12:57 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-24 21:12:57 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-May-24 21:12:57 LOG4 got_cormsg: From DATATAKING: pnt tr 31.42 10.9424498420 -CF 2010-May-24 21:12:57 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-24 21:12:57 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-24 21:12:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 21:12:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-24 21:12:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4378.00 2010-May-24 21:12:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.129048 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-24 21:12:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.129048 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-May-24 21:12:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.129048 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-May-24 21:12:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.129048 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-May-24 21:12:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.129048 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-May-24 21:12:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.129048 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 21:12:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.129048 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2010-May-24 21:12:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.129048 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2010-May-24 21:12:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.129048 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2010-May-24 21:12:59 INFO2 got_mock_message: Mock spectrometer start file number is 00800 2010-May-24 21:12:59 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-May-24 21:12:59 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2010-May-24 21:12:59 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2010-May-24 21:12:59 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-May-24 21:12:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-May-24 21:12:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-May-24 21:12:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-May-24 21:12:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-May-24 21:12:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-May-24 21:12:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-May-24 21:12:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-May-24 21:12:59 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-May-24 21:12:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.16 GB 2010-May-24 21:12:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.16 GB 2010-May-24 21:12:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.16 GB 2010-May-24 21:12:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.16 GB 2010-May-24 21:12:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.16 GB 2010-May-24 21:12:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.16 GB 2010-May-24 21:12:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.16 GB 2010-May-24 21:13:00 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2010-May-24 21:13:02 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 21:13:02.01 2010-May-24 21:13:02 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1274749982.01 Mon May 24 21:13:02 2010 2010-May-24 21:13:02 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-May-24 21:13:11 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2010-May-24 21:29:32 COMMAND CIMA-send_to_exec: Sending command to abort observation 2010-May-24 21:29:32 LOG4 exec_msg: From OBSERVER: abort_task abort 2010-May-24 21:29:32 WARNING abort_task: WARNING abort requested! 2010-May-24 21:29:32 WARNING abort_task: WARNING Aborting waiting on WAPP+Mock spectra 2010-May-24 21:29:32 WARNING abort_task: WARNING Aborting wait for waiting on WAPP+Mock spectra 2010-May-24 21:29:32 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'ABORT' 2010-May-24 21:29:32 LOG5 end_task: Level: (4) ID = <10201> Status = 1 0 0 0 abort 2010-May-24 21:29:32 LOG4 stop_backends: Calling 'stop_backends' 2010-May-24 21:29:32 START begin_task: Starting task 'stopping the WAPPs' 2010-May-24 21:29:32 LOG5 begin_task: Level: (4) ID = <10202> Status = 1 0 0 0 abort 2010-May-24 21:29:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2010-May-24 21:29:32 INFO1 stop_wapp: Stopping the WAPPs 2010-May-24 21:29:32 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2010-May-24 21:29:32 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2010-May-24 21:29:32 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2010-May-24 21:29:32 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2010-May-24 21:29:32 START begin_task: Starting task 'waiting on stopping WAPPs' 2010-May-24 21:29:32 LOG5 begin_task: Level: (5) ID = <10203> Status = 1 0 0 0 abort 2010-May-24 21:29:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2010-May-24 21:29:33 NOTE WAPP=1+2+3+4-wappcon: WAPP successfully aborted! 2010-May-24 21:29:34 LOG4 WAPP=1+2+3+4-start_spectra: Abort request received 2010-May-24 21:29:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-24 21:29:34 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'ABORT' 2010-May-24 21:29:34 LOG5 end_task: Level: (5) ID = <10203> Status = 1 0 0 0 abort 2010-May-24 21:29:34 STOP end_task: Finishing task 'stopping the WAPPs' with status 'ABORT' 2010-May-24 21:29:34 LOG5 end_task: Level: (4) ID = <10202> Status = 1 0 0 0 abort 2010-May-24 21:29:34 START begin_task: Starting task 'stopping the Mock spectrometer' 2010-May-24 21:29:34 LOG5 begin_task: Level: (4) ID = <10204> Status = 1 0 0 0 abort 2010-May-24 21:29:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping Mock ...} 2010-May-24 21:29:34 INFO1 stop_mock: Stopping the Mock spectrometer 2010-May-24 21:29:34 LOG2 socket_wait: Starting sockwait on MOCK for 'stop the Mock spectrometer' using string 'stop' 2010-May-24 21:29:34 LOG3 socket_wait: To MOCK: STOP 2010-May-24 21:29:34 START begin_task: Starting task 'waiting on stop the Mock spectrometer' 2010-May-24 21:29:34 LOG5 begin_task: Level: (5) ID = <10205> Status = 1 0 0 0 abort 2010-May-24 21:29:35 LOG1 from_mock: From MOCK: stopok 2010-May-24 21:29:35 INFO1 got_mock_message: From MOCK: DONE with observation (aborted) 2010-May-24 21:29:35 INFO2 got_mock_message: Observation was 82.5% complete when aborted 2010-May-24 21:29:35 STOP end_task: Finishing task 'waiting on stop the Mock spectrometer' with status 'ABORT' 2010-May-24 21:29:35 LOG5 end_task: Level: (5) ID = <10205> Status = 1 0 0 0 abort 2010-May-24 21:29:35 LOG3 socket_wait: DONE with sockwait on MOCK for 'stop the Mock spectrometer' 2010-May-24 21:29:35 STOP end_task: Finishing task 'stopping the Mock spectrometer' with status 'ABORT' 2010-May-24 21:29:35 LOG5 end_task: Level: (4) ID = <10204> Status = 1 0 0 0 abort 2010-May-24 21:29:35 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'ABORT' 2010-May-24 21:29:35 LOG5 end_task: Level: (3) ID = <10198> Status = 1 0 0 0 abort 2010-May-24 21:29:35 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-May-24 21:29:35 LOG5 finish_task: Level: (2) ID = <10161> Status = 1 0 0 0 abort 2010-May-24 21:29:35 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2010-May-24 21:29:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2010-May-24 21:29:35 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2010-May-24 21:29:35 LOG5 end_task: Level: (2) ID = <10161> Status = 1 0 0 0 abort 2010-May-24 21:29:35 ALERT run_command_file: Stopping command file processing at line 54! 2010-May-24 21:29:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-May-24 21:29:35 STOP finish_task: Finishing task 'running command file '100524.cmd'' 2010-May-24 21:29:35 LOG5 finish_task: Level: (1) ID = <10160> Status = 1 0 0 0 abort 2010-May-24 21:29:35 WARNING finish_task: WARNING aborted running: command file '100524.cmd' 2010-May-24 21:29:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2010-May-24 21:29:35 END end_task: Finishing task 'running command file '100524.cmd'' with status 'ABORT' 2010-May-24 21:29:35 LOG5 end_task: Level: (1) ID = <10160> Status = 1 0 0 0 abort 2010-May-24 21:29:49 ALERT CIMA-exit_cima: Exiting CIMA ... 2010-May-24 21:29:49 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2010-May-24 21:29:49 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2010-May-24 21:29:49 LOG3 vw_send: To DATATAKING: mvdata a2048 2010-May-24 21:29:49 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2010-May-24 21:29:49 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2010-May-24 21:29:49 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2010-May-24 21:29:49 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2010-May-24 21:29:49 NOTE CIMA-exit_cima: Cleaning up session ... 2010-May-24 21:29:49 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2010-May-24 21:29:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 21:29:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-24 21:29:51 LOG3 exec_msg: Closing socket