2010-May-20 20:00:25 BEGIN executive: CIMA executive starting ... 2010-May-20 20:00:25 NOTE executive: STARTING NEW CIMA SESSION 2010-May-20 20:00:25 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2010-May-20 20:00:25 INFO4 executive: This is an ON-LINE session 2010-May-20 20:00:25 INFO4 executive: This is a REMOTE session 2010-May-20 20:00:25 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2010-May-20 20:00:25 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'RT' 2010-May-20 20:00:25 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20100520' 2010-May-20 20:00:26 LOG2 log_preferences: Currently applied preferences: 2010-May-20 20:00:26 LOG2 log_preferences: prefs(dailylog) = daily 2010-May-20 20:00:26 LOG2 log_preferences: prefs(offlinelog) = skip 2010-May-20 20:00:26 LOG2 log_preferences: prefs(datawindow) = ignore 2010-May-20 20:00:26 LOG2 log_preferences: prefs(limitwarning) = enabled 2010-May-20 20:00:26 LOG2 log_preferences: prefs(wappfailure) = abort 2010-May-20 20:00:26 LOG2 log_preferences: prefs(helpstyle) = stay-open 2010-May-20 20:00:26 LOG2 log_preferences: prefs(logcolours) = full 2010-May-20 20:00:26 LOG2 log_preferences: prefs(displaylevel) = INFO3 2010-May-20 20:00:26 LOG2 log_preferences: prefs(loglevel) = LOG5 2010-May-20 20:00:26 LOG2 log_preferences: prefs(displayformat) = short 2010-May-20 20:00:26 LOG2 log_preferences: prefs(logformat) = new 2010-May-20 20:00:26 LOG2 log_preferences: prefs(fontsize) = 4 2010-May-20 20:00:26 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2010-May-20 20:00:26 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2010-May-20 20:00:26 ALERT executive: CIMA executive ready 2010-May-20 20:00:29 NOTE frontend: CIMA frontend ready 2010-May-20 20:00:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:00:29 LOG4 got_cormsg: From DATATAKING: setup 2010-May-20 20:00:36 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2010-May-20 20:00:36 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2010-May-20 20:00:36 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2010-May-20 20:00:36 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2010-May-20 20:00:36 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-May-20 20:00:36 NOTE select_receiver: Starting to select receiver ALFA 2010-May-20 20:00:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-May-20 20:00:36 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-May-20 20:00:36 LOG3 vw_send: To DATATAKING: acvlbical off 2010-May-20 20:00:36 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-May-20 20:00:36 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-May-20 20:00:36 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-May-20 20:00:36 DONE finish_task: DONE finished selecting: receiver ALFA 2010-May-20 20:00:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-20 20:00:36 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-May-20 20:00:36 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-May-20 20:00:36 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2010-May-20 20:00:36 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2010-May-20 20:00:36 LOG4 got_cormsg: From DATATAKING: vw% io 2010-May-20 20:00:36 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2010-May-20 20:00:36 LOG4 got_cormsg: From DATATAKING: 2010-May-20 20:00:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:00:36 LOG4 got_cormsg: From DATATAKING: tape stat 2010-May-20 20:00:36 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2010-May-20 20:00:36 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2010-May-20 20:00:36 LOG4 got_cormsg: From DATATAKING: vw% connectall 2010-May-20 20:00:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2010-May-20 20:00:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2010-May-20 20:00:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2010-May-20 20:00:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2010-May-20 20:00:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2010-May-20 20:00:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2010-May-20 20:00:36 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2010-May-20 20:00:36 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2010-May-20 20:00:36 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2010-May-20 20:00:36 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-May-20 20:00:36 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-May-20 20:00:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:00:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:00:43 LOG4 got_cormsg: From DATATAKING: waiting for turret position:26.64 2010-May-20 20:01:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:01:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:01:20 COMMAND CIMA-send_to_exec: Sending command to restart the ALFA communication programs 2010-May-20 20:01:20 LOG4 exec_msg: From OBSERVER: restart_alfa 2010-May-20 20:01:20 LOG5 restart_alfa: Calling 'restart_alfa' 2010-May-20 20:01:20 BEGIN begin_task: Starting task 'restarting ALFA communication' 2010-May-20 20:01:20 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-May-20 20:01:20 ALERT restart_alfa: Restarting the ALFA communication programs 2010-May-20 20:01:20 END end_task: Finishing task 'restarting ALFA communication' with status 'OK' 2010-May-20 20:01:20 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-May-20 20:01:21 LOG4 exec_msg: From SPAWNALFA: log_message PROBLEM {AERONCPU-spawnalfa} {can't read file '/home/cima/Wapp/Bin/Progs/Start/start_alfa_motor'!} 2010-May-20 20:01:21 PROBLEM AERONCPU-spawnalfa: can't read file '/home/cima/Wapp/Bin/Progs/Start/start_alfa_motor'! 2010-May-20 20:01:21 LOG4 exec_msg: From SPAWNALFA: log_message ERROR {AERONCPU-spawnalfa} {ERROR can't restart ALFA motor control software!} 2010-May-20 20:01:21 ERROR AERONCPU-spawnalfa: ERROR can't restart ALFA motor control software! 2010-May-20 20:01:21 LOG4 exec_msg: From SPAWNALFA: log_message PROBLEM {AERONCPU-spawnalfa} {can't read file '/home/cima/Wapp/Bin/Progs/Start/start_alfa_mon'!} 2010-May-20 20:01:21 PROBLEM AERONCPU-spawnalfa: can't read file '/home/cima/Wapp/Bin/Progs/Start/start_alfa_mon'! 2010-May-20 20:01:21 LOG4 exec_msg: From SPAWNALFA: log_message ERROR {AERONCPU-spawnalfa} {ERROR can't restart ALFA monitor software!} 2010-May-20 20:01:21 ERROR AERONCPU-spawnalfa: ERROR can't restart ALFA monitor software! 2010-May-20 20:01:21 LOG4 exec_msg: From SPAWNALFA: log_message PROBLEM {AERONCPU-spawnalfa} {can't read file '/home/cima/Wapp/Bin/Progs/Start/start_caltrig'!} 2010-May-20 20:01:21 PROBLEM AERONCPU-spawnalfa: can't read file '/home/cima/Wapp/Bin/Progs/Start/start_caltrig'! 2010-May-20 20:01:21 LOG4 exec_msg: From SPAWNALFA: log_message ERROR {AERONCPU-spawnalfa} {ERROR can't restart CAL trig software!} 2010-May-20 20:01:21 ERROR AERONCPU-spawnalfa: ERROR can't restart CAL trig software! 2010-May-20 20:01:28 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-May-20 20:01:28 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-May-20 20:01:28 LOG5 restart_wapp: Calling 'restart_wapp' 2010-May-20 20:01:28 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-May-20 20:01:28 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-May-20 20:01:28 NOTE restart_wapp: Restarting all WAPPs 2010-May-20 20:01:28 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-May-20 20:01:28 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-May-20 20:01:28 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-May-20 20:01:28 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-May-20 20:01:33 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-May-20 20:01:33 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-May-20 20:01:33 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-May-20 20:01:33 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-May-20 20:02:01 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima31.cmd' (at lines 1 - 24) 2010-May-20 20:02:01 INFO4 CIMA-load_command_file: Loaded command file '100520.cmd' 2010-May-20 20:04:20 INFO1 CIMA-run_command_file: Transferring command file '100520.cmd' to executive ... 2010-May-20 20:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima31.conf} 2010-May-20 20:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2010-May-20 20:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2010-May-20 20:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2010-May-20 20:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2010-May-20 20:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2010-May-20 20:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2010-May-20 20:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2010-May-20 20:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2010-May-20 20:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2010-May-20 20:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2010-May-20 20:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2010-May-20 20:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2010-May-20 20:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 27 {LOAD ages_mock.conf} 2010-May-20 20:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 28 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2010-May-20 20:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 29 {CATALOG AGESFull.cat} 2010-May-20 20:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 32 {IF LSTSLEW(AGESVC1A_p2_032) < 114433 THEN} 2010-May-20 20:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 33 {FIXEDDRIFT az=328.38 alfaangle=45.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_032 ra=120900.00 dec=81330.00} 2010-May-20 20:04:21 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 36 {ENDIF} 2010-May-20 20:04:21 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 39 {IF LSTSLEW(AGESVC1A_p2_034) < 120733 THEN} 2010-May-20 20:04:21 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 40 {FIXEDDRIFT az=357.22 alfaangle=21.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_034 ra=120900.00 dec=81030.00} 2010-May-20 20:04:21 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 43 {ENDIF} 2010-May-20 20:04:21 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 46 {IF LSTSLEW(AGESVC1A_p2_036) < 123033 THEN} 2010-May-20 20:04:21 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 47 {FIXEDDRIFT az=27.07 alfaangle=-3.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_036 ra=120900.00 dec=80730.00} 2010-May-20 20:04:21 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 50 {ENDIF} 2010-May-20 20:04:21 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 53 {IF LSTSLEW(AGESVC1B_p2_028) < 125332 THEN} 2010-May-20 20:04:21 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 54 {FIXEDDRIFT az=30.81 alfaangle=-6.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_028 ra=122900.00 dec=81930.00} 2010-May-20 20:04:21 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 57 {ENDIF} 2010-May-20 20:04:21 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-May-20 20:04:21 LOG4 exec_msg: From OBSERVER: run_command_file 100520.cmd 1 1 28 2010-May-20 20:04:21 LOG4 run_command_file: Calling 'run_command_file 100520.cmd 1 1 28' 2010-May-20 20:04:21 BEGIN begin_task: Starting task 'running command file '100520.cmd'' 2010-May-20 20:04:21 LOG5 begin_task: Level: (1) ID = <10004> Status = 0 0 0 0 ok 2010-May-20 20:04:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100520.cmd' ...} 2010-May-20 20:04:21 NOTE run_command_file: Starting execution of command file '100520.cmd' from line 1 2010-May-20 20:04:21 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima31.conf' 2010-May-20 20:04:21 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-May-20 20:04:21 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-20 20:04:21 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-May-20 20:04:21 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2010-May-20 20:04:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-May-20 20:04:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-May-20 20:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-May-20 20:04:23 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-20 20:04:23 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-May-20 20:04:23 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2010-May-20 20:04:23 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-May-20 20:04:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-May-20 20:04:23 INFO1 config_iflo: Selecting receiver ALFA 2010-May-20 20:04:23 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2010-May-20 20:04:23 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2010-May-20 20:04:23 START begin_task: Starting task 'selecting receiver ALFA' 2010-May-20 20:04:23 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-May-20 20:04:23 NOTE select_receiver: Starting to select receiver ALFA 2010-May-20 20:04:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-May-20 20:04:23 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-May-20 20:04:23 LOG3 vw_send: To DATATAKING: acvlbical off 2010-May-20 20:04:23 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-May-20 20:04:23 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-May-20 20:04:23 LOG5 finish_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-May-20 20:04:23 INFO2 finish_task: DONE finished selecting: receiver ALFA 2010-May-20 20:04:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 20:04:23 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-May-20 20:04:23 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-May-20 20:04:23 START begin_task: Starting task 'waiting for receiver ALFA' 2010-May-20 20:04:23 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-May-20 20:04:23 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2010-May-20 20:04:23 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-May-20 20:04:23 INFO1 config_iflo: Configuring rest of the IF/LO path 2010-May-20 20:04:23 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2010-May-20 20:04:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-20 20:04:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-20 20:04:23 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-20 20:04:23 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-May-20 20:04:23 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-20 20:04:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-20 20:04:23 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-May-20 20:04:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-20 20:04:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-20 20:04:24 LOG3 vw_send: To DATATAKING: alfafb 1 2010-May-20 20:04:24 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2010-May-20 20:04:24 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-May-20 20:04:24 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-May-20 20:04:24 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2010-May-20 20:04:24 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2010-May-20 20:04:24 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2010-May-20 20:04:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-May-20 20:04:24 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2010-May-20 20:04:24 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2010-May-20 20:04:24 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-May-20 20:04:24 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-May-20 20:04:24 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-May-20 20:04:24 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-May-20 20:04:24 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-May-20 20:04:24 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2010-May-20 20:04:24 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2010-May-20 20:04:24 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2010-May-20 20:04:24 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2010-May-20 20:04:24 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-May-20 20:04:24 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2010-May-20 20:04:24 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-May-20 20:04:24 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-May-20 20:04:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:04:24 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-May-20 20:04:24 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2010-May-20 20:04:24 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-May-20 20:04:24 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2010-May-20 20:04:24 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2010-May-20 20:04:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-May-20 20:04:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-20 20:04:24 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-May-20 20:04:24 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2010-May-20 20:04:24 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-May-20 20:04:24 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-May-20 20:04:24 LOG4 got_cormsg: From DATATAKING: alfafb 1 2010-May-20 20:04:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2010-May-20 20:04:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2010-May-20 20:04:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2010-May-20 20:04:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2010-May-20 20:04:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-May-20 20:04:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2010-May-20 20:04:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2010-May-20 20:04:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2010-May-20 20:04:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2010-May-20 20:04:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2010-May-20 20:04:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2010-May-20 20:04:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-May-20 20:04:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2010-May-20 20:04:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-May-20 20:04:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:04:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-May-20 20:04:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2010-May-20 20:04:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2010-May-20 20:04:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2010-May-20 20:04:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-20 20:04:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:40 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-20 20:04:40 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-May-20 20:04:40 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2010-May-20 20:04:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-May-20 20:04:40 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-May-20 20:04:40 LOG5 finish_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2010-May-20 20:04:40 DONE finish_task: DONE finished configuration: IF/LO path 2010-May-20 20:04:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-20 20:04:40 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-May-20 20:04:40 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2010-May-20 20:04:40 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-May-20 20:04:40 LOG5 begin_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2010-May-20 20:04:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-May-20 20:04:40 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-May-20 20:04:40 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-May-20 20:04:40 START begin_task: Starting task 'selecting calibration port' 2010-May-20 20:04:40 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2010-May-20 20:04:40 LOG3 vw_send: To DATATAKING: calport 3 2010-May-20 20:04:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-May-20 20:04:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-20 20:04:40 START begin_task: Starting task 'waiting on calport' 2010-May-20 20:04:40 LOG5 begin_task: Level: (4) ID = <10012> Status = 0 0 0 0 ok 2010-May-20 20:04:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:40 LOG4 got_cormsg: From DATATAKING: calport 3 2010-May-20 20:04:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-20 20:04:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:40 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-20 20:04:40 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-May-20 20:04:40 LOG5 end_task: Level: (4) ID = <10012> Status = 0 0 0 0 ok 2010-May-20 20:04:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-May-20 20:04:40 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-May-20 20:04:40 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2010-May-20 20:04:40 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-20 20:04:40 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-20 20:04:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-20 20:04:40 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-May-20 20:04:40 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-20 20:04:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-20 20:04:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-20 20:04:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-20 20:04:40 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-May-20 20:04:40 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-May-20 20:04:40 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-May-20 20:04:40 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-May-20 20:04:40 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-May-20 20:04:40 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-May-20 20:04:40 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-May-20 20:04:40 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-May-20 20:04:40 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-May-20 20:04:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-20 20:04:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-20 20:04:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-20 20:04:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-20 20:04:41 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-May-20 20:04:41 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-May-20 20:04:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-20 20:04:41 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2010-May-20 20:04:41 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-20 20:04:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-20 20:04:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-20 20:04:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-20 20:04:41 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2010-May-20 20:04:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-20 20:04:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-20 20:04:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-20 20:04:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-20 20:04:41 STOP finish_task: Finishing task 'configuring WAPPs' 2010-May-20 20:04:41 LOG5 finish_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2010-May-20 20:04:41 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-May-20 20:04:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-20 20:04:41 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-May-20 20:04:41 LOG5 end_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2010-May-20 20:04:41 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2010-May-20 20:04:41 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2010-May-20 20:04:41 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2010-May-20 20:04:41 LOG3 is_if_valid: Current source data: up 323.5 11.6 UP - - 99 11.0 2010-May-20 20:04:41 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2010-May-20 20:04:41 INFO5 is_if_valid: Condition parsed as: 1 2010-May-20 20:04:41 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2010-May-20 20:04:41 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2010-May-20 20:04:41 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2010-May-20 20:04:41 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2010-May-20 20:04:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2010-May-20 20:04:41 LOG3 track_source: Calling 'track_source galfasrc 115900.0 +090000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2010-May-20 20:04:41 START begin_task: Starting task 'sending tracking commands' 2010-May-20 20:04:41 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-May-20 20:04:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2010-May-20 20:04:42 INFO1 track_source: Starting to track galfasrc 2010-May-20 20:04:42 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2010-May-20 20:04:42 LOG3 vw_send: To DATATAKING: set ra 115900.0 2010-May-20 20:04:42 LOG3 vw_send: To DATATAKING: set dec +090000 2010-May-20 20:04:42 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-20 20:04:42 LOG3 vw_send: To DATATAKING: pnt tr 115900.0 +090000 -CJ 2010-May-20 20:04:42 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-May-20 20:04:42 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-20 20:04:42 LOG5 finish_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-May-20 20:04:42 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-20 20:04:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 20:04:42 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-20 20:04:42 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-May-20 20:04:42 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2010-May-20 20:04:42 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2010-May-20 20:04:42 DONE finish_task: DONE finished tracking: source 'galfasrc' 2010-May-20 20:04:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-20 20:04:42 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2010-May-20 20:04:42 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2010-May-20 20:04:42 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2010-May-20 20:04:42 INFO1 run_command_line: Skipping line 'ELSEIF isup(galfasrc2) then' since an earlier condition already has been true 2010-May-20 20:04:42 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2010-May-20 20:04:42 INFO1 run_command_line: Skipping line 'GOTO galfasrc2' in non-true conditional branch 2010-May-20 20:04:42 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2010-May-20 20:04:42 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2010-May-20 20:04:42 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2010-May-20 20:04:42 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2010-May-20 20:04:42 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2010-May-20 20:04:42 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2010-May-20 20:04:42 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2010-May-20 20:04:42 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2010-May-20 20:04:42 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2010-May-20 20:04:42 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-May-20 20:04:42 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2010-May-20 20:04:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-May-20 20:04:42 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-May-20 20:04:42 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-May-20 20:04:42 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-May-20 20:04:42 START begin_task: Starting task 'waiting on ALFA rotation' 2010-May-20 20:04:42 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2010-May-20 20:04:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-20 20:04:42 NOTE WAPPDATA-new_file: New FITS file: wapp.20100520.a2048.0000.fits 2010-May-20 20:04:42 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2010-May-20 20:04:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-May-20 20:04:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-May-20 20:04:42 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20100520.a2048.0000.fits} 2010-May-20 20:04:42 LOG4 got_cormsg: From DATATAKING: set ra 115900.0 2010-May-20 20:04:42 LOG4 got_cormsg: From DATATAKING: set dec +090000 2010-May-20 20:04:42 LOG4 got_cormsg: From DATATAKING: vw% 115900.0 2010-May-20 20:04:42 LOG4 got_cormsg: From DATATAKING: vw% +090000 2010-May-20 20:04:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:04:42 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-20 20:04:43 LOG4 got_cormsg: From DATATAKING: pnt tr 115900.0 +090000 -CJ 2010-May-20 20:04:43 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-May-20 20:04:43 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2010-May-20 20:04:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-20 20:05:37 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-May-20 20:05:37 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-May-20 20:05:37 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-May-20 20:05:37 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2010-May-20 20:05:37 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-May-20 20:05:37 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-May-20 20:05:37 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2010-May-20 20:05:37 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-May-20 20:05:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-20 20:05:37 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-May-20 20:05:37 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2010-May-20 20:05:37 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2010-May-20 20:05:37 BEGIN begin_task: Starting task 'waiting on telescope' 2010-May-20 20:05:37 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-May-20 20:05:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-20 20:05:37 LOG3 waittrk: Start waittrk 5 2010-May-20 20:05:37 START begin_task: Starting task 'waiting on telescope movement' 2010-May-20 20:05:37 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-May-20 20:05:42 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-20 20:05:42 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-May-20 20:05:42 START begin_task: Starting task 'waiting on telescope on source' 2010-May-20 20:05:42 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-May-20 20:07:13 COMMAND CIMA-send_to_exec: Sending command to abort observation 2010-May-20 20:07:13 LOG4 exec_msg: From OBSERVER: abort_task abort 2010-May-20 20:07:13 WARNING abort_task: WARNING abort requested! 2010-May-20 20:07:13 WARNING abort_task: WARNING Aborting wait for waiting on telescope on source 2010-May-20 20:07:13 STOP end_task: Finishing task 'waiting on telescope on source' with status 'ABORT' 2010-May-20 20:07:13 LOG5 end_task: Level: (3) ID = <10021> Status = 1 0 0 0 abort 2010-May-20 20:07:13 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-May-20 20:07:13 LOG4 waittrk: Current telescope position: Az = 121.19 ZA = 11.21 2010-May-20 20:07:13 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-20 20:07:13 LOG5 finish_task: Level: (2) ID = <10019> Status = 1 0 0 0 abort 2010-May-20 20:07:13 WARNING finish_task: WARNING aborted waiting: telescope on source 2010-May-20 20:07:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2010-May-20 20:07:14 END end_task: Finishing task 'waiting on telescope' with status 'ABORT' 2010-May-20 20:07:14 LOG5 end_task: Level: (2) ID = <10019> Status = 1 0 0 0 abort 2010-May-20 20:07:14 ALERT run_command_file: Stopping command file processing at line 16! 2010-May-20 20:07:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-May-20 20:07:14 STOP finish_task: Finishing task 'running command file '100520.cmd'' 2010-May-20 20:07:14 LOG5 finish_task: Level: (1) ID = <10004> Status = 1 0 0 0 abort 2010-May-20 20:07:14 WARNING finish_task: WARNING aborted running: command file '100520.cmd' 2010-May-20 20:07:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2010-May-20 20:07:14 END end_task: Finishing task 'running command file '100520.cmd'' with status 'ABORT' 2010-May-20 20:07:14 LOG5 end_task: Level: (1) ID = <10004> Status = 1 0 0 0 abort 2010-May-20 20:07:20 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-May-20 20:07:20 LOG4 exec_msg: From OBSERVER: run_command_file 100520.cmd 12 1 28 2010-May-20 20:07:20 LOG4 run_command_file: Calling 'run_command_file 100520.cmd 12 1 28' 2010-May-20 20:07:20 BEGIN begin_task: Starting task 'running command file '100520.cmd'' 2010-May-20 20:07:20 LOG5 begin_task: Level: (1) ID = <10022> Status = 0 0 0 0 ok 2010-May-20 20:07:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100520.cmd' ...} 2010-May-20 20:07:20 NOTE run_command_file: Starting execution of command file '100520.cmd' from line 12 2010-May-20 20:07:20 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2010-May-20 20:07:20 BEGIN begin_task: Starting task 'tracking current position' 2010-May-20 20:07:20 LOG5 begin_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2010-May-20 20:07:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2010-May-20 20:07:20 INFO1 track_current_pos: Starting to track the current commanded position RA = 10:53:21.3 and Dec = +24:28:01.4 2010-May-20 20:07:20 LOG3 track_source: Calling 'track_source Cur-pos 105321.3 242801.4 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2010-May-20 20:07:20 START begin_task: Starting task 'sending tracking commands' 2010-May-20 20:07:20 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2010-May-20 20:07:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2010-May-20 20:07:20 INFO1 track_source: Starting to track Cur-pos 2010-May-20 20:07:20 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2010-May-20 20:07:20 LOG3 vw_send: To DATATAKING: set ra 105321.3 2010-May-20 20:07:20 LOG3 vw_send: To DATATAKING: set dec 242801.4 2010-May-20 20:07:20 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-20 20:07:20 LOG3 vw_send: To DATATAKING: pnt tr 105321.3 242801.4 -CJ 2010-May-20 20:07:20 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-May-20 20:07:20 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-20 20:07:20 LOG5 finish_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2010-May-20 20:07:20 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-20 20:07:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 20:07:20 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-20 20:07:20 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2010-May-20 20:07:20 START begin_task: Starting task 'waiting on telescope' 2010-May-20 20:07:20 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-May-20 20:07:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-20 20:07:21 LOG3 waittrk: Start waittrk 5 2010-May-20 20:07:21 START begin_task: Starting task 'waiting on telescope movement' 2010-May-20 20:07:21 LOG5 begin_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2010-May-20 20:07:21 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2010-May-20 20:07:21 LOG4 got_cormsg: From DATATAKING: set ra 105321.3 2010-May-20 20:07:21 LOG4 got_cormsg: From DATATAKING: set dec 242801.4 2010-May-20 20:07:21 LOG4 got_cormsg: From DATATAKING: vw% 105321.3 2010-May-20 20:07:21 LOG4 got_cormsg: From DATATAKING: vw% 242801.4 2010-May-20 20:07:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:07:21 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-20 20:07:21 LOG4 got_cormsg: From DATATAKING: pnt tr 105321.3 242801.4 -CJ 2010-May-20 20:07:21 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-May-20 20:07:21 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-20 20:07:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:07:26 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-20 20:07:26 LOG5 end_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2010-May-20 20:07:26 START begin_task: Starting task 'waiting on telescope on source' 2010-May-20 20:07:26 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2010-May-20 20:07:51 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-20 20:07:51 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2010-May-20 20:07:51 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-20 20:07:51 INFO2 waittrk: Now tracking Cur-pos 2010-May-20 20:07:51 LOG4 waittrk: Current telescope position: Az = 123.94 ZA = 11.32 2010-May-20 20:07:51 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-20 20:07:51 LOG5 finish_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-May-20 20:07:51 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-20 20:07:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 20:07:51 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-20 20:07:51 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-May-20 20:07:51 STOP finish_task: Finishing task 'tracking current position' 2010-May-20 20:07:51 LOG5 finish_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2010-May-20 20:07:51 DONE finish_task: DONE finished tracking: current position 2010-May-20 20:07:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-20 20:07:51 END end_task: Finishing task 'tracking current position' with status 'OK' 2010-May-20 20:07:51 LOG5 end_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2010-May-20 20:07:51 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2010-May-20 20:07:51 NOTE execute_log: No source found in togs_ages.cat - tracking current position 2010-May-20 20:07:51 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2010-May-20 20:07:51 ERROR run_command_line: ERROR found an 'ENDIF' without matching 'IF'! 2010-May-20 20:07:51 LOG1 task_failed: Task 'running command file '100520.cmd'' failed! 2010-May-20 20:07:51 LOG5 task_failed: Level: (1) ID = <10022> Status = 0 0 0 0 ok 2010-May-20 20:07:51 ALERT run_command_file: Stopping command file processing at line 14! 2010-May-20 20:07:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-May-20 20:07:51 STOP finish_task: Finishing task 'running command file '100520.cmd'' 2010-May-20 20:07:51 LOG5 finish_task: Level: (1) ID = <10022> Status = 0 0 0 1 failed 2010-May-20 20:07:51 ERROR finish_task: ERROR failed running: command file '100520.cmd' 2010-May-20 20:07:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-May-20 20:07:51 END end_task: Finishing task 'running command file '100520.cmd'' with status 'FAILED' 2010-May-20 20:07:51 LOG5 end_task: Level: (1) ID = <10022> Status = 0 0 0 1 failed 2010-May-20 20:08:11 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-May-20 20:08:11 LOG4 exec_msg: From OBSERVER: run_command_file 100520.cmd 1 1 28 2010-May-20 20:08:11 LOG4 run_command_file: Calling 'run_command_file 100520.cmd 1 1 28' 2010-May-20 20:08:11 BEGIN begin_task: Starting task 'running command file '100520.cmd'' 2010-May-20 20:08:11 LOG5 begin_task: Level: (1) ID = <10028> Status = 0 0 0 0 ok 2010-May-20 20:08:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100520.cmd' ...} 2010-May-20 20:08:11 NOTE run_command_file: Starting execution of command file '100520.cmd' from line 1 2010-May-20 20:08:11 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima31.conf' 2010-May-20 20:08:11 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-May-20 20:08:11 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-20 20:08:11 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-May-20 20:08:12 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2010-May-20 20:08:12 LOG2 CIMA-antvel: Precessing RA = 10:53:21.3 Dec = +24:28:01.4 Epoch = 2010.38560 J 2010-May-20 20:08:12 LOG2 CIMA-antvel: Computed apparent RA = 10:53:56.4 Dec = +24:24:40.9 2010-May-20 20:08:12 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 86891 2010 140 0.0 2010-May-20 20:08:12 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-May-20 20:08:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-20 20:08:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-20 20:08:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-May-20 20:08:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-May-20 20:08:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-May-20 20:08:14 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-20 20:08:14 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-May-20 20:08:14 LOG5 begin_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-May-20 20:08:14 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-May-20 20:08:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-May-20 20:08:14 LOG1 config_iflo: Receiver ALFA already selected 2010-May-20 20:08:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-20 20:08:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-20 20:08:14 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-20 20:08:14 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-May-20 20:08:14 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-20 20:08:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-20 20:08:14 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-May-20 20:08:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-20 20:08:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-20 20:08:14 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-May-20 20:08:14 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-May-20 20:08:14 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-May-20 20:08:14 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-May-20 20:08:14 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-May-20 20:08:14 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-May-20 20:08:14 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-May-20 20:08:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-May-20 20:08:14 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-May-20 20:08:14 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-May-20 20:08:14 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-May-20 20:08:14 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-May-20 20:08:14 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-May-20 20:08:14 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-May-20 20:08:14 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-May-20 20:08:14 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-May-20 20:08:14 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-May-20 20:08:14 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-May-20 20:08:14 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-May-20 20:08:14 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2010-May-20 20:08:14 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-May-20 20:08:14 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-May-20 20:08:14 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-May-20 20:08:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:08:14 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-May-20 20:08:14 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-May-20 20:08:14 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-May-20 20:08:14 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-May-20 20:08:14 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-May-20 20:08:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-May-20 20:08:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-20 20:08:14 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-May-20 20:08:14 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2010-May-20 20:08:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-May-20 20:08:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:08:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-20 20:08:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:08:14 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-May-20 20:08:14 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-May-20 20:08:14 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2010-May-20 20:08:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-May-20 20:08:14 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-May-20 20:08:14 LOG5 finish_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-May-20 20:08:14 DONE finish_task: DONE finished configuration: IF/LO path 2010-May-20 20:08:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-20 20:08:14 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-May-20 20:08:14 LOG5 end_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-May-20 20:08:14 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-May-20 20:08:14 LOG5 begin_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2010-May-20 20:08:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-May-20 20:08:14 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-May-20 20:08:14 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-May-20 20:08:14 START begin_task: Starting task 'selecting calibration port' 2010-May-20 20:08:14 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2010-May-20 20:08:14 LOG3 vw_send: To DATATAKING: calport 3 2010-May-20 20:08:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-May-20 20:08:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-20 20:08:14 START begin_task: Starting task 'waiting on calport' 2010-May-20 20:08:14 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2010-May-20 20:08:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:08:14 LOG4 got_cormsg: From DATATAKING: calport 3 2010-May-20 20:08:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-20 20:08:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:08:15 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-20 20:08:15 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-May-20 20:08:15 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2010-May-20 20:08:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-May-20 20:08:15 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-May-20 20:08:15 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2010-May-20 20:08:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-20 20:08:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-20 20:08:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-20 20:08:15 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-May-20 20:08:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:08:15 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-20 20:08:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-20 20:08:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-20 20:08:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-20 20:08:15 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-May-20 20:08:15 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-May-20 20:08:15 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-May-20 20:08:15 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-May-20 20:08:15 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-May-20 20:08:15 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-May-20 20:08:15 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-May-20 20:08:15 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-May-20 20:08:15 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-May-20 20:08:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-20 20:08:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-20 20:08:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-20 20:08:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-20 20:08:15 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-May-20 20:08:15 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-May-20 20:08:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-20 20:08:15 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2010-May-20 20:08:15 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-20 20:08:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-20 20:08:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-20 20:08:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-20 20:08:15 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2010-May-20 20:08:15 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-May-20 20:08:15 STOP finish_task: Finishing task 'configuring WAPPs' 2010-May-20 20:08:15 LOG5 finish_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2010-May-20 20:08:15 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-May-20 20:08:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-20 20:08:15 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-May-20 20:08:15 LOG5 end_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2010-May-20 20:08:15 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2010-May-20 20:08:15 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2010-May-20 20:08:15 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2010-May-20 20:08:16 LOG3 is_if_valid: Current source data: up 327.3 11.1 UP - - 95 8.5 2010-May-20 20:08:16 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2010-May-20 20:08:16 INFO5 is_if_valid: Condition parsed as: 1 2010-May-20 20:08:16 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2010-May-20 20:08:16 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2010-May-20 20:08:16 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2010-May-20 20:08:16 LOG5 begin_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2010-May-20 20:08:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2010-May-20 20:08:16 LOG3 track_source: Calling 'track_source galfasrc 115900.0 +090000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2010-May-20 20:08:16 START begin_task: Starting task 'sending tracking commands' 2010-May-20 20:08:16 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2010-May-20 20:08:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2010-May-20 20:08:16 INFO1 track_source: Starting to track galfasrc 2010-May-20 20:08:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2010-May-20 20:08:16 LOG3 vw_send: To DATATAKING: set ra 115900.0 2010-May-20 20:08:16 LOG3 vw_send: To DATATAKING: set dec +090000 2010-May-20 20:08:16 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-20 20:08:16 LOG3 vw_send: To DATATAKING: pnt tr 115900.0 +090000 -CJ 2010-May-20 20:08:16 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-May-20 20:08:16 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-20 20:08:16 LOG5 finish_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2010-May-20 20:08:16 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-20 20:08:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 20:08:16 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-20 20:08:16 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2010-May-20 20:08:16 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2010-May-20 20:08:16 LOG5 finish_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2010-May-20 20:08:16 DONE finish_task: DONE finished tracking: source 'galfasrc' 2010-May-20 20:08:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-20 20:08:16 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2010-May-20 20:08:16 LOG5 end_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2010-May-20 20:08:16 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2010-May-20 20:08:16 INFO1 run_command_line: Skipping line 'ELSEIF isup(galfasrc2) then' since an earlier condition already has been true 2010-May-20 20:08:16 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2010-May-20 20:08:16 INFO1 run_command_line: Skipping line 'GOTO galfasrc2' in non-true conditional branch 2010-May-20 20:08:16 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2010-May-20 20:08:16 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2010-May-20 20:08:16 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2010-May-20 20:08:16 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2010-May-20 20:08:16 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2010-May-20 20:08:16 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2010-May-20 20:08:16 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2010-May-20 20:08:16 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2010-May-20 20:08:16 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2010-May-20 20:08:16 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-May-20 20:08:17 LOG5 begin_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2010-May-20 20:08:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-May-20 20:08:17 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-May-20 20:08:17 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-May-20 20:08:17 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-May-20 20:08:17 START begin_task: Starting task 'waiting on ALFA rotation' 2010-May-20 20:08:17 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2010-May-20 20:08:17 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-May-20 20:08:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2010-May-20 20:08:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-May-20 20:08:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-May-20 20:08:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-20 20:08:17 LOG4 got_cormsg: From DATATAKING: set ra 115900.0 2010-May-20 20:08:17 LOG4 got_cormsg: From DATATAKING: set dec +090000 2010-May-20 20:08:17 LOG4 got_cormsg: From DATATAKING: vw% 115900.0 2010-May-20 20:08:17 LOG4 got_cormsg: From DATATAKING: vw% +090000 2010-May-20 20:08:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:08:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-20 20:08:17 LOG4 got_cormsg: From DATATAKING: pnt tr 115900.0 +090000 -CJ 2010-May-20 20:08:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-May-20 20:08:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-20 20:08:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:08:17 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-May-20 20:08:17 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-May-20 20:08:17 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-May-20 20:08:17 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2010-May-20 20:08:17 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-May-20 20:08:17 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-May-20 20:08:17 LOG5 finish_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2010-May-20 20:08:17 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-May-20 20:08:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-20 20:08:17 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-May-20 20:08:18 LOG5 end_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2010-May-20 20:08:18 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2010-May-20 20:08:18 BEGIN begin_task: Starting task 'waiting on telescope' 2010-May-20 20:08:18 LOG5 begin_task: Level: (2) ID = <10041> Status = 0 0 0 0 ok 2010-May-20 20:08:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-20 20:08:18 LOG3 waittrk: Start waittrk 5 2010-May-20 20:08:18 START begin_task: Starting task 'waiting on telescope movement' 2010-May-20 20:08:18 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2010-May-20 20:08:23 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-20 20:08:23 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2010-May-20 20:08:23 START begin_task: Starting task 'waiting on telescope on source' 2010-May-20 20:08:23 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2010-May-20 20:17:04 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-20 20:17:04 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2010-May-20 20:17:04 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-May-20 20:17:04 INFO2 waittrk: Now tracking galfasrc 2010-May-20 20:17:04 LOG4 waittrk: Current telescope position: Az = 337.56 ZA = 10.10 2010-May-20 20:17:04 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-20 20:17:04 LOG5 finish_task: Level: (2) ID = <10041> Status = 0 0 0 0 ok 2010-May-20 20:17:04 DONE finish_task: DONE finished waiting: telescope on source 2010-May-20 20:17:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-20 20:17:04 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-20 20:17:04 LOG5 end_task: Level: (2) ID = <10041> Status = 0 0 0 0 ok 2010-May-20 20:17:04 COMMAND run_command_line: EXECUTING command 20: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2010-May-20 20:17:04 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2010-May-20 20:17:06 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-20 20:17:06 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2010-May-20 20:17:06 BEGIN begin_task: Starting task 'smart frequency switching' 2010-May-20 20:17:06 LOG5 begin_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2010-May-20 20:17:06 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2010-May-20 20:17:06 INFO1 smartfreq: Starting pattern: Smart frequency switching 2010-May-20 20:17:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2010-May-20 20:17:06 START begin_task: Starting task 'selecting calibration type' 2010-May-20 20:17:06 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-May-20 20:17:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-20 20:17:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-20 20:17:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-20 20:17:07 START begin_task: Starting task 'waiting on setcal' 2010-May-20 20:17:07 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2010-May-20 20:17:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-20 20:17:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-20 20:17:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:17:07 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-20 20:17:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-20 20:17:07 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2010-May-20 20:17:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-20 20:17:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-20 20:17:07 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-20 20:17:07 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-20 20:17:07 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2010-May-20 20:17:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:17:07 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-20 20:17:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-20 20:17:07 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2010-May-20 20:17:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-20 20:17:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-20 20:17:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-20 20:17:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-20 20:17:08 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-20 20:17:08 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2010-May-20 20:17:08 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-20 20:17:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-20 20:17:08 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2010-May-20 20:17:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-20 20:17:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-20 20:17:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-20 20:17:08 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-May-20 20:17:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-20 20:17:08 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-20 20:17:08 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-20 20:17:08 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-20 20:17:08 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20100520.a2048.0000.fits' is empty! 2010-May-20 20:17:08 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2010-May-20 20:17:08 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-May-20 20:17:08 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-May-20 20:17:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-20 20:17:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-20 20:17:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-20 20:17:08 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2010-May-20 20:17:08 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-20 20:17:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-20 20:17:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-20 20:17:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-20 20:17:08 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2010-May-20 20:17:08 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-May-20 20:17:08 START begin_task: Starting task 'adjusting WAPP power' 2010-May-20 20:17:08 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2010-May-20 20:17:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-May-20 20:17:08 INFO2 adjust_power: Starting to adjust WAPP power 2010-May-20 20:17:08 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-May-20 20:17:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-May-20 20:17:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-20 20:17:08 START begin_task: Starting task 'waiting on adjpwrif2' 2010-May-20 20:17:08 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2010-May-20 20:17:08 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-May-20 20:17:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-20 20:17:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-20 20:17:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:17:11 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-20 20:17:11 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-May-20 20:17:11 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2010-May-20 20:17:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-May-20 20:17:11 START begin_task: Starting task 'adjusting WAPP power' 2010-May-20 20:17:11 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2010-May-20 20:17:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-20 20:17:11 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-May-20 20:17:11 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-May-20 20:17:11 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-May-20 20:17:11 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-May-20 20:17:11 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-May-20 20:17:11 LOG5 begin_task: Level: (5) ID = <10053> Status = 0 0 0 0 ok 2010-May-20 20:17:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:17:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-May-20 20:17:11 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-May-20 20:17:12 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 4 3 dB 2010-May-20 20:17:12 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 5 dB 2010-May-20 20:17:12 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-May-20 20:17:12 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-May-20 20:17:12 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-May-20 20:17:12 LOG5 end_task: Level: (5) ID = <10053> Status = 0 0 0 0 ok 2010-May-20 20:17:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.949 0.959 ALFA beam 1: 1.031 1.058 2010-May-20 20:17:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.949 0.946 ALFA beam 3: 0.905 0.991 2010-May-20 20:17:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.903 0.894 ALFA beam 5: 0.942 1.002 2010-May-20 20:17:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.913 0.872 ALFA beam 7: 1.001 1.024 2010-May-20 20:17:12 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-20 20:17:12 LOG5 finish_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2010-May-20 20:17:12 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-May-20 20:17:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 20:17:12 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-20 20:17:12 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2010-May-20 20:17:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-20 20:17:12 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-20 20:17:12 LOG5 finish_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2010-May-20 20:17:12 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-May-20 20:17:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 20:17:12 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-20 20:17:12 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2010-May-20 20:17:12 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2010-May-20 20:17:12 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-May-20 20:17:12 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-May-20 20:17:12 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:17:12 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38561 J 2010-May-20 20:17:12 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:17:12 LOG2 antvel: Parameters to Doppler: Topocentric 87431 2010 140 0.0 2010-May-20 20:17:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:17:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-May-20 20:17:12 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-May-20 20:17:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:17:12 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:17:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-May-20 20:17:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:17:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2010-May-20 20:17:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:17:12 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2010-May-20 20:17:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2010-May-20 20:17:12 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.738854 2010.3856133229397 18.999933 2010-May-20 20:17:12 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333324 9.000000000000000 2010-May-20 20:17:12 LOG4 log_alfabeam: ALFABEAM 1 11.979711112890278 9.091573770374186 2010-May-20 20:17:12 LOG4 log_alfabeam: ALFABEAM 2 11.977056961310096 9.001876991840899 2010-May-20 20:17:12 LOG4 log_alfabeam: ALFABEAM 3 11.980644688069075 8.909990721253109 2010-May-20 20:17:12 LOG4 log_alfabeam: ALFABEAM 4 11.986975527501368 8.908574188616541 2010-May-20 20:17:12 LOG4 log_alfabeam: ALFABEAM 5 11.989628994125459 8.998992317415052 2010-May-20 20:17:12 LOG4 log_alfabeam: ALFABEAM 6 11.985952467453462 9.090101144493808 2010-May-20 20:17:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000107 2010-May-20 20:17:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:17:13 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2010-May-20 20:17:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:17:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-May-20 20:17:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:17:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:17:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:17:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-May-20 20:17:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1034.00 2010-May-20 20:17:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:17:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:17:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:17:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:17:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:17:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:17:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:17:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:17:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:17:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:17:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:17:24 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2010-May-20 20:17:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:17:24 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2010-May-20 20:17:24 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2010-May-20 20:17:24 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-May-20 20:17:24 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-May-20 20:17:24 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:17:24 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38561 J 2010-May-20 20:17:24 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:17:24 LOG2 antvel: Parameters to Doppler: Topocentric 87444 2010 140 0.0 2010-May-20 20:17:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:17:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-May-20 20:17:24 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-May-20 20:17:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:17:24 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:17:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-May-20 20:17:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:17:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2010-May-20 20:17:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:17:24 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-May-20 20:17:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2010-May-20 20:17:24 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.742475 2010.3856137348848 18.999933 2010-May-20 20:17:24 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333322 9.000000000000000 2010-May-20 20:17:24 LOG4 log_alfabeam: ALFABEAM 1 11.979740637641422 9.091828621888169 2010-May-20 20:17:24 LOG4 log_alfabeam: ALFABEAM 2 11.977057651837558 9.002320966144520 2010-May-20 20:17:24 LOG4 log_alfabeam: ALFABEAM 3 11.980615703595372 8.910181676080343 2010-May-20 20:17:24 LOG4 log_alfabeam: ALFABEAM 4 11.986946104775340 8.908318223432273 2010-May-20 20:17:24 LOG4 log_alfabeam: ALFABEAM 5 11.989628613257892 8.998548696672151 2010-May-20 20:17:24 LOG4 log_alfabeam: ALFABEAM 6 11.985981358335669 9.089915291534162 2010-May-20 20:17:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000108 2010-May-20 20:17:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:17:25 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2010-May-20 20:17:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:17:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-May-20 20:17:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:17:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:17:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:17:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-May-20 20:17:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1046.00 2010-May-20 20:17:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:17:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:17:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:17:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:17:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:17:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:17:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:17:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:17:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:17:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:17:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:17:36 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2010-May-20 20:17:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:17:36 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-May-20 20:17:36 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2010-May-20 20:17:36 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-May-20 20:17:36 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-May-20 20:17:36 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:17:36 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38561 J 2010-May-20 20:17:36 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:17:36 LOG2 antvel: Parameters to Doppler: Topocentric 87456 2010 140 0.0 2010-May-20 20:17:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:17:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-May-20 20:17:36 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-May-20 20:17:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:17:36 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:17:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-May-20 20:17:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:17:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2010-May-20 20:17:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:17:36 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-May-20 20:17:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2010-May-20 20:17:36 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.745818 2010.3856141151418 18.999933 2010-May-20 20:17:36 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333327 8.999999999999993 2010-May-20 20:17:36 LOG4 log_alfabeam: ALFABEAM 1 11.979768069371714 9.092062912637381 2010-May-20 20:17:36 LOG4 log_alfabeam: ALFABEAM 2 11.977058419216036 9.002732314227343 2010-May-20 20:17:36 LOG4 log_alfabeam: ALFABEAM 3 11.980588901134443 8.910360451523779 2010-May-20 20:17:36 LOG4 log_alfabeam: ALFABEAM 4 11.986918766984276 8.908082888279043 2010-May-20 20:17:36 LOG4 log_alfabeam: ALFABEAM 5 11.989628132988139 8.998137634867931 2010-May-20 20:17:36 LOG4 log_alfabeam: ALFABEAM 6 11.986008077055763 9.089741255887773 2010-May-20 20:17:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000109 2010-May-20 20:17:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:17:37 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-May-20 20:17:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:17:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-May-20 20:17:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:17:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:17:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:17:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-May-20 20:17:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1058.00 2010-May-20 20:17:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:17:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:17:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:17:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:17:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:17:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:17:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:17:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:17:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:17:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:17:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:17:48 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-May-20 20:17:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:17:48 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-May-20 20:17:48 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2010-May-20 20:17:48 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-May-20 20:17:48 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-May-20 20:17:48 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:17:48 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38561 J 2010-May-20 20:17:48 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:17:48 LOG2 antvel: Parameters to Doppler: Topocentric 87468 2010 140 0.0 2010-May-20 20:17:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:17:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-May-20 20:17:48 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-May-20 20:17:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:17:48 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:17:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-May-20 20:17:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:17:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2010-May-20 20:17:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:17:48 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-May-20 20:17:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2010-May-20 20:17:48 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.749160 2010.3856144953988 18.999933 2010-May-20 20:17:48 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333322 9.000000000000004 2010-May-20 20:17:48 LOG4 log_alfabeam: ALFABEAM 1 11.979795659164004 9.092296148950547 2010-May-20 20:17:48 LOG4 log_alfabeam: ALFABEAM 2 11.977059312282440 9.003144921314917 2010-May-20 20:17:48 LOG4 log_alfabeam: ALFABEAM 3 11.980562066948128 8.910541565563115 2010-May-20 20:17:48 LOG4 log_alfabeam: ALFABEAM 4 11.986891270844191 8.907848592280674 2010-May-20 20:17:48 LOG4 log_alfabeam: ALFABEAM 5 11.989627528088716 8.997725275005395 2010-May-20 20:17:48 LOG4 log_alfabeam: ALFABEAM 6 11.986034830123195 9.089564908267858 2010-May-20 20:17:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000110 2010-May-20 20:17:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:17:49 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2010-May-20 20:17:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:17:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-May-20 20:17:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:17:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:17:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:17:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-May-20 20:17:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1070.00 2010-May-20 20:17:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:17:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:17:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:17:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:17:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:17:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:17:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:17:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:17:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:18:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:18:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:18:00 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2010-May-20 20:18:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:18:00 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-May-20 20:18:00 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2010-May-20 20:18:00 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-May-20 20:18:00 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-May-20 20:18:00 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:18:00 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38561 J 2010-May-20 20:18:00 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:18:00 LOG2 antvel: Parameters to Doppler: Topocentric 87480 2010 140 0.0 2010-May-20 20:18:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:18:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-May-20 20:18:00 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-May-20 20:18:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:18:00 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:18:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-May-20 20:18:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:18:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2010-May-20 20:18:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:18:00 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-May-20 20:18:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2010-May-20 20:18:00 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.752502 2010.3856148756561 18.999933 2010-May-20 20:18:00 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333324 8.999999999999996 2010-May-20 20:18:00 LOG4 log_alfabeam: ALFABEAM 1 11.979823414727800 9.092528371949392 2010-May-20 20:18:00 LOG4 log_alfabeam: ALFABEAM 2 11.977060332493446 9.003558891602051 2010-May-20 20:18:00 LOG4 log_alfabeam: ALFABEAM 3 11.980535194767905 8.910725081795501 2010-May-20 20:18:00 LOG4 log_alfabeam: ALFABEAM 4 11.986863608657947 8.907615293996468 2010-May-20 20:18:00 LOG4 log_alfabeam: ALFABEAM 5 11.989626797159518 8.997311512548599 2010-May-20 20:18:00 LOG4 log_alfabeam: ALFABEAM 6 11.986061623819101 9.089386186101347 2010-May-20 20:18:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000111 2010-May-20 20:18:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:18:01 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2010-May-20 20:18:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:18:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-May-20 20:18:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:18:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:18:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:18:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-May-20 20:18:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1082.00 2010-May-20 20:18:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:18:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:18:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:18:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:18:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:18:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:18:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:18:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:18:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:18:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:18:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:18:12 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2010-May-20 20:18:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:18:12 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-May-20 20:18:12 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2010-May-20 20:18:12 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-May-20 20:18:12 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-May-20 20:18:12 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:18:12 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:18:12 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:18:12 LOG2 antvel: Parameters to Doppler: Topocentric 87492 2010 140 0.0 2010-May-20 20:18:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:18:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-May-20 20:18:12 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-May-20 20:18:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:18:12 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:18:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-May-20 20:18:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:18:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2010-May-20 20:18:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:18:12 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-May-20 20:18:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2010-May-20 20:18:12 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.755845 2010.3856152559131 18.999933 2010-May-20 20:18:12 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333315 9.000000000000000 2010-May-20 20:18:12 LOG4 log_alfabeam: ALFABEAM 1 11.979851343933682 9.092759621422877 2010-May-20 20:18:12 LOG4 log_alfabeam: ALFABEAM 2 11.977061481446635 9.003974330448676 2010-May-20 20:18:12 LOG4 log_alfabeam: ALFABEAM 3 11.980508278306059 8.910911066339674 2010-May-20 20:18:12 LOG4 log_alfabeam: ALFABEAM 4 11.986835772566765 8.907382953304170 2010-May-20 20:18:12 LOG4 log_alfabeam: ALFABEAM 5 11.989625938660060 8.996896241754715 2010-May-20 20:18:12 LOG4 log_alfabeam: ALFABEAM 6 11.986088464446679 9.089205024313586 2010-May-20 20:18:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000112 2010-May-20 20:18:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:18:13 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2010-May-20 20:18:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:18:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-May-20 20:18:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:18:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:18:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:18:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-May-20 20:18:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1094.00 2010-May-20 20:18:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:18:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:18:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:18:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:18:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:18:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:18:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:18:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:18:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:18:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:18:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:18:24 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2010-May-20 20:18:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:18:24 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-May-20 20:18:24 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2010-May-20 20:18:24 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-May-20 20:18:24 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-May-20 20:18:24 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:18:24 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:18:24 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:18:24 LOG2 antvel: Parameters to Doppler: Topocentric 87504 2010 140 0.0 2010-May-20 20:18:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:18:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-May-20 20:18:24 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-May-20 20:18:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:18:24 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:18:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-May-20 20:18:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:18:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2010-May-20 20:18:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:18:24 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-May-20 20:18:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2010-May-20 20:18:24 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.759187 2010.3856156361701 18.999933 2010-May-20 20:18:24 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333329 9.000000000000007 2010-May-20 20:18:24 LOG4 log_alfabeam: ALFABEAM 1 11.979879429526111 9.092989729678202 2010-May-20 20:18:24 LOG4 log_alfabeam: ALFABEAM 2 11.977062759677723 9.004390969730196 2010-May-20 20:18:24 LOG4 log_alfabeam: ALFABEAM 3 11.980481335461374 8.911099417689600 2010-May-20 20:18:24 LOG4 log_alfabeam: ALFABEAM 4 11.986807779754368 8.907151738549166 2010-May-20 20:18:24 LOG4 log_alfabeam: ALFABEAM 5 11.989624951850283 8.996479730225808 2010-May-20 20:18:24 LOG4 log_alfabeam: ALFABEAM 6 11.986115334190083 9.089021521109315 2010-May-20 20:18:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000113 2010-May-20 20:18:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:18:25 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2010-May-20 20:18:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:18:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-May-20 20:18:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:18:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:18:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:18:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-May-20 20:18:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1106.00 2010-May-20 20:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:18:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:18:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:18:36 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2010-May-20 20:18:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:18:36 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-May-20 20:18:36 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-May-20 20:18:36 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-20 20:18:36 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-20 20:18:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-20 20:18:36 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-May-20 20:18:36 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-20 20:18:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-20 20:18:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-20 20:18:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-20 20:18:36 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-May-20 20:18:36 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2010-May-20 20:18:36 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-May-20 20:18:36 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-May-20 20:18:36 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:18:36 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:18:36 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:18:36 LOG2 antvel: Parameters to Doppler: Topocentric 87516 2010 140 0.0 2010-May-20 20:18:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:18:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-May-20 20:18:36 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-May-20 20:18:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:18:36 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:18:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-May-20 20:18:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:18:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2010-May-20 20:18:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:18:36 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2010-May-20 20:18:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2010-May-20 20:18:36 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.762530 2010.3856160164271 18.999933 2010-May-20 20:18:36 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333315 9.000000000000002 2010-May-20 20:18:36 LOG4 log_alfabeam: ALFABEAM 1 11.979907687727948 9.093218804964975 2010-May-20 20:18:36 LOG4 log_alfabeam: ALFABEAM 2 11.977064169162730 9.004809038725405 2010-May-20 20:18:36 LOG4 log_alfabeam: ALFABEAM 3 11.980454351932151 8.911290257956088 2010-May-20 20:18:36 LOG4 log_alfabeam: ALFABEAM 4 11.986779614037159 8.906921540823825 2010-May-20 20:18:36 LOG4 log_alfabeam: ALFABEAM 5 11.989623834897193 8.996061748343323 2010-May-20 20:18:36 LOG4 log_alfabeam: ALFABEAM 6 11.986142247344535 9.088835556849673 2010-May-20 20:18:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000114 2010-May-20 20:18:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:18:37 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2010-May-20 20:18:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:18:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-May-20 20:18:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:18:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:18:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:18:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-May-20 20:18:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1118.00 2010-May-20 20:18:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:18:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:18:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:18:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:18:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:18:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:18:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:18:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:18:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:18:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:18:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:18:48 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2010-May-20 20:18:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:18:48 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2010-May-20 20:18:48 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2010-May-20 20:18:48 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-May-20 20:18:48 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-May-20 20:18:48 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:18:48 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:18:48 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:18:48 LOG2 antvel: Parameters to Doppler: Topocentric 87528 2010 140 0.0 2010-May-20 20:18:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:18:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-May-20 20:18:48 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-May-20 20:18:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:18:48 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:18:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-May-20 20:18:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:18:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2010-May-20 20:18:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:18:48 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-May-20 20:18:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2010-May-20 20:18:48 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.765872 2010.3856163966843 18.999933 2010-May-20 20:18:48 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333324 9.000000000000000 2010-May-20 20:18:48 LOG4 log_alfabeam: ALFABEAM 1 11.979936101010280 9.093446680698483 2010-May-20 20:18:48 LOG4 log_alfabeam: ALFABEAM 2 11.977065710255857 9.005228266803570 2010-May-20 20:18:48 LOG4 log_alfabeam: ALFABEAM 3 11.980427345708538 8.911483481973404 2010-May-20 20:18:48 LOG4 log_alfabeam: ALFABEAM 4 11.986751292872396 8.906692527393188 2010-May-20 20:18:48 LOG4 log_alfabeam: ALFABEAM 5 11.989622587239557 8.995642566275905 2010-May-20 20:18:48 LOG4 log_alfabeam: ALFABEAM 6 11.986169185998994 9.088647233340867 2010-May-20 20:18:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000115 2010-May-20 20:18:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:18:49 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-May-20 20:18:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:18:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-May-20 20:18:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:18:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:18:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:18:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-May-20 20:18:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1130.00 2010-May-20 20:18:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:18:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:18:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:18:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:18:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:18:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:18:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:18:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:18:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:19:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:19:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:19:00 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-May-20 20:19:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:19:00 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-May-20 20:19:00 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2010-May-20 20:19:00 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-May-20 20:19:00 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-May-20 20:19:00 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:19:00 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:19:00 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:19:00 LOG2 antvel: Parameters to Doppler: Topocentric 87540 2010 140 0.0 2010-May-20 20:19:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:19:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-May-20 20:19:00 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-May-20 20:19:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:19:00 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:19:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-May-20 20:19:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:19:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2010-May-20 20:19:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:19:00 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-May-20 20:19:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2010-May-20 20:19:00 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.769215 2010.3856167769413 18.999933 2010-May-20 20:19:00 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333318 9.000000000000007 2010-May-20 20:19:00 LOG4 log_alfabeam: ALFABEAM 1 11.979964685714721 9.093673463619181 2010-May-20 20:19:00 LOG4 log_alfabeam: ALFABEAM 2 11.977067385063457 9.005648883860655 2010-May-20 20:19:00 LOG4 log_alfabeam: ALFABEAM 3 11.980400302501518 8.911679213994576 2010-May-20 20:19:00 LOG4 log_alfabeam: ALFABEAM 4 11.986722799957050 8.906464590849236 2010-May-20 20:19:00 LOG4 log_alfabeam: ALFABEAM 5 11.989621206913817 8.995221953751305 2010-May-20 20:19:00 LOG4 log_alfabeam: ALFABEAM 6 11.986196164438635 9.088456428806673 2010-May-20 20:19:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000116 2010-May-20 20:19:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:19:01 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-May-20 20:19:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:19:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-May-20 20:19:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:19:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:19:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:19:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-May-20 20:19:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1142.00 2010-May-20 20:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:19:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:19:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:19:12 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-May-20 20:19:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:19:12 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-May-20 20:19:12 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2010-May-20 20:19:12 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-May-20 20:19:12 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-May-20 20:19:12 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:19:12 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:19:12 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:19:12 LOG2 antvel: Parameters to Doppler: Topocentric 87552 2010 140 0.0 2010-May-20 20:19:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:19:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-May-20 20:19:12 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-May-20 20:19:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:19:12 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:19:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-May-20 20:19:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:19:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2010-May-20 20:19:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:19:12 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-May-20 20:19:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2010-May-20 20:19:12 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.772557 2010.3856171571983 18.999933 2010-May-20 20:19:12 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333318 8.999999999999995 2010-May-20 20:19:12 LOG4 log_alfabeam: ALFABEAM 1 11.979993424039019 9.093898988360639 2010-May-20 20:19:12 LOG4 log_alfabeam: ALFABEAM 2 11.977069193752726 9.006070616811503 2010-May-20 20:19:12 LOG4 log_alfabeam: ALFABEAM 3 11.980373240386973 8.911877345135055 2010-May-20 20:19:12 LOG4 log_alfabeam: ALFABEAM 4 11.986694153021892 8.906237897266482 2010-May-20 20:19:12 LOG4 log_alfabeam: ALFABEAM 5 11.989619693543178 8.994800183455077 2010-May-20 20:19:12 LOG4 log_alfabeam: ALFABEAM 6 11.986223164662768 9.088263248714718 2010-May-20 20:19:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000117 2010-May-20 20:19:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:19:13 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2010-May-20 20:19:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:19:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-May-20 20:19:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:19:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:19:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:19:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-May-20 20:19:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1154.00 2010-May-20 20:19:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:19:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:19:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:19:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:19:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:19:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:19:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:19:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:19:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:19:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:19:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:19:24 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2010-May-20 20:19:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:19:24 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-May-20 20:19:24 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2010-May-20 20:19:24 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-May-20 20:19:24 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-May-20 20:19:24 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:19:24 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:19:24 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:19:24 LOG2 antvel: Parameters to Doppler: Topocentric 87564 2010 140 0.0 2010-May-20 20:19:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:19:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-May-20 20:19:24 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-May-20 20:19:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:19:24 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:19:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-May-20 20:19:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:19:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2010-May-20 20:19:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:19:24 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-May-20 20:19:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2010-May-20 20:19:24 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.775900 2010.3856175374553 18.999933 2010-May-20 20:19:24 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333322 9.000000000000000 2010-May-20 20:19:24 LOG4 log_alfabeam: ALFABEAM 1 11.980022332440660 9.094123360123797 2010-May-20 20:19:24 LOG4 log_alfabeam: ALFABEAM 2 11.977071138560577 9.006493696122977 2010-May-20 20:19:24 LOG4 log_alfabeam: ALFABEAM 3 11.980346145091758 8.912078001773525 2010-May-20 20:19:24 LOG4 log_alfabeam: ALFABEAM 4 11.986665335647468 8.906012340767287 2010-May-20 20:19:24 LOG4 log_alfabeam: ALFABEAM 5 11.989618045033337 8.994377024507926 2010-May-20 20:19:24 LOG4 log_alfabeam: ALFABEAM 6 11.986250200943456 9.088067569166949 2010-May-20 20:19:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000118 2010-May-20 20:19:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:19:25 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2010-May-20 20:19:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:19:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-May-20 20:19:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:19:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:19:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:19:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-May-20 20:19:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1166.00 2010-May-20 20:19:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:19:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:19:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:19:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:19:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:19:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:19:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:19:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:19:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:19:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:19:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:19:36 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2010-May-20 20:19:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:19:36 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-May-20 20:19:36 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2010-May-20 20:19:36 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-May-20 20:19:36 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-May-20 20:19:36 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:19:36 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:19:36 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:19:36 LOG2 antvel: Parameters to Doppler: Topocentric 87576 2010 140 0.0 2010-May-20 20:19:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:19:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-May-20 20:19:36 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-May-20 20:19:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:19:36 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:19:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-May-20 20:19:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:19:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2010-May-20 20:19:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:19:36 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-May-20 20:19:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2010-May-20 20:19:36 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.779242 2010.3856179177124 18.999933 2010-May-20 20:19:36 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333322 9.000000000000002 2010-May-20 20:19:36 LOG4 log_alfabeam: ALFABEAM 1 11.980051392844416 9.094346414873160 2010-May-20 20:19:36 LOG4 log_alfabeam: ALFABEAM 2 11.977073219461669 9.006917846311730 2010-May-20 20:19:36 LOG4 log_alfabeam: ALFABEAM 3 11.980319034771393 8.912281071250085 2010-May-20 20:19:36 LOG4 log_alfabeam: ALFABEAM 4 11.986636365837679 8.905788086123341 2010-May-20 20:19:36 LOG4 log_alfabeam: ALFABEAM 5 11.989616261197460 8.993952752058171 2010-May-20 20:19:36 LOG4 log_alfabeam: ALFABEAM 6 11.986277255196049 9.087869499350168 2010-May-20 20:19:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000119 2010-May-20 20:19:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:19:37 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-May-20 20:19:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:19:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-May-20 20:19:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:19:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:19:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:19:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-May-20 20:19:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1178.00 2010-May-20 20:19:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:19:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:19:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:19:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:19:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:19:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:19:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:19:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:19:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:19:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:19:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:19:48 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-May-20 20:19:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:19:48 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-May-20 20:19:48 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2010-May-20 20:19:48 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-May-20 20:19:48 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-May-20 20:19:48 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:19:48 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:19:48 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:19:48 LOG2 antvel: Parameters to Doppler: Topocentric 87588 2010 140 0.0 2010-May-20 20:19:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:19:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-May-20 20:19:48 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-May-20 20:19:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:19:48 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:19:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-May-20 20:19:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:19:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2010-May-20 20:19:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:19:48 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-May-20 20:19:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2010-May-20 20:19:48 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.782585 2010.3856182979696 18.999933 2010-May-20 20:19:48 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333329 8.999999999999998 2010-May-20 20:19:48 LOG4 log_alfabeam: ALFABEAM 1 11.980080621820584 9.094568256241141 2010-May-20 20:19:48 LOG4 log_alfabeam: ALFABEAM 2 11.977075438823535 9.007343298369117 2010-May-20 20:19:48 LOG4 log_alfabeam: ALFABEAM 3 11.980291895171755 8.912486682051053 2010-May-20 20:19:48 LOG4 log_alfabeam: ALFABEAM 4 11.986607227059563 8.905565029016481 2010-May-20 20:19:48 LOG4 log_alfabeam: ALFABEAM 5 11.989614339810332 8.993527134666056 2010-May-20 20:19:48 LOG4 log_alfabeam: ALFABEAM 6 11.986304341676401 9.087668913261307 2010-May-20 20:19:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000120 2010-May-20 20:19:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:19:49 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-May-20 20:19:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:19:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-May-20 20:19:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:19:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:19:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:19:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-May-20 20:19:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1190.00 2010-May-20 20:19:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:19:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:19:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:19:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:19:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:19:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:19:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:19:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:19:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:20:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:20:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:20:00 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-May-20 20:20:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:20:00 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-May-20 20:20:00 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2010-May-20 20:20:00 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-May-20 20:20:00 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-May-20 20:20:00 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-20 20:20:00 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-20 20:20:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-20 20:20:00 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-May-20 20:20:00 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-20 20:20:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-20 20:20:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-20 20:20:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-20 20:20:00 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-May-20 20:20:00 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-May-20 20:20:00 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2010-May-20 20:20:00 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-May-20 20:20:00 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-May-20 20:20:00 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:20:00 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:20:00 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:20:00 LOG2 antvel: Parameters to Doppler: Topocentric 87600 2010 140 0.0 2010-May-20 20:20:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:20:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-May-20 20:20:00 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-May-20 20:20:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:20:00 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:20:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-May-20 20:20:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:20:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2010-May-20 20:20:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:20:00 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2010-May-20 20:20:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2010-May-20 20:20:00 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.785927 2010.3856186782266 18.999933 2010-May-20 20:20:00 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333322 9.000000000000004 2010-May-20 20:20:00 LOG4 log_alfabeam: ALFABEAM 1 11.980110001021716 9.094788721637622 2010-May-20 20:20:00 LOG4 log_alfabeam: ALFABEAM 2 11.977077796422943 9.007769774474513 2010-May-20 20:20:00 LOG4 log_alfabeam: ALFABEAM 3 11.980264744521767 8.912694717687371 2010-May-20 20:20:00 LOG4 log_alfabeam: ALFABEAM 4 11.986577937589614 8.905343332801396 2010-May-20 20:20:00 LOG4 log_alfabeam: ALFABEAM 5 11.989612280880648 8.993100449884009 2010-May-20 20:20:00 LOG4 log_alfabeam: ALFABEAM 6 11.986331442222006 9.087465923861657 2010-May-20 20:20:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000121 2010-May-20 20:20:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:20:01 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2010-May-20 20:20:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:20:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-May-20 20:20:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:20:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:20:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:20:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-May-20 20:20:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1202.00 2010-May-20 20:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:20:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:20:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:20:12 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2010-May-20 20:20:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:20:12 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2010-May-20 20:20:12 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2010-May-20 20:20:12 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-May-20 20:20:12 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-May-20 20:20:12 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:20:12 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:20:12 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:20:12 LOG2 antvel: Parameters to Doppler: Topocentric 87612 2010 140 0.0 2010-May-20 20:20:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:20:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-May-20 20:20:12 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-May-20 20:20:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:20:12 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:20:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-May-20 20:20:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:20:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2010-May-20 20:20:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:20:12 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-May-20 20:20:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2010-May-20 20:20:12 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.789269 2010.3856190584836 18.999933 2010-May-20 20:20:12 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333338 8.999999999999998 2010-May-20 20:20:12 LOG4 log_alfabeam: ALFABEAM 1 11.980139538266174 9.095007847735214 2010-May-20 20:20:12 LOG4 log_alfabeam: ALFABEAM 2 11.977080293989596 9.008197377982855 2010-May-20 20:20:12 LOG4 log_alfabeam: ALFABEAM 3 11.980237576720919 8.912905245365616 2010-May-20 20:20:12 LOG4 log_alfabeam: ALFABEAM 4 11.986548489619533 8.905122960486286 2010-May-20 20:20:12 LOG4 log_alfabeam: ALFABEAM 5 11.989610082730934 8.992672593955106 2010-May-20 20:20:12 LOG4 log_alfabeam: ALFABEAM 6 11.986358562951496 9.087260464909408 2010-May-20 20:20:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000122 2010-May-20 20:20:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:20:13 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-May-20 20:20:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:20:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-May-20 20:20:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:20:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:20:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:20:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-May-20 20:20:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1214.00 2010-May-20 20:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:20:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:20:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:20:24 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-May-20 20:20:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:20:24 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-May-20 20:20:24 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2010-May-20 20:20:24 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-May-20 20:20:24 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-May-20 20:20:24 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:20:24 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:20:24 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:20:24 LOG2 antvel: Parameters to Doppler: Topocentric 87624 2010 140 0.0 2010-May-20 20:20:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:20:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-May-20 20:20:24 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-May-20 20:20:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:20:24 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:20:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-May-20 20:20:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:20:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2010-May-20 20:20:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:20:24 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-May-20 20:20:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2010-May-20 20:20:24 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.792612 2010.3856194387406 18.999933 2010-May-20 20:20:24 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333327 8.999999999999993 2010-May-20 20:20:24 LOG4 log_alfabeam: ALFABEAM 1 11.980169241520585 9.095225669597255 2010-May-20 20:20:24 LOG4 log_alfabeam: ALFABEAM 2 11.977082933402148 9.008626213145790 2010-May-20 20:20:24 LOG4 log_alfabeam: ALFABEAM 3 11.980210385670384 8.913118334820526 2010-May-20 20:20:24 LOG4 log_alfabeam: ALFABEAM 4 11.986518875192006 8.904903876675265 2010-May-20 20:20:24 LOG4 log_alfabeam: ALFABEAM 5 11.989607743534831 8.992243462181982 2010-May-20 20:20:24 LOG4 log_alfabeam: ALFABEAM 6 11.986385709984704 9.087052467648650 2010-May-20 20:20:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000123 2010-May-20 20:20:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:20:25 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-May-20 20:20:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:20:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-May-20 20:20:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:20:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:20:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:20:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-May-20 20:20:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1226.00 2010-May-20 20:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:20:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:20:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:20:36 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-May-20 20:20:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:20:36 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-May-20 20:20:36 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2010-May-20 20:20:36 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-May-20 20:20:36 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-May-20 20:20:36 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:20:36 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:20:36 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:20:36 LOG2 antvel: Parameters to Doppler: Topocentric 87636 2010 140 0.0 2010-May-20 20:20:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:20:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-May-20 20:20:36 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-May-20 20:20:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:20:36 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:20:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-May-20 20:20:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:20:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2010-May-20 20:20:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:20:36 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-May-20 20:20:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2010-May-20 20:20:36 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.795954 2010.3856198189976 18.999933 2010-May-20 20:20:36 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333327 8.999999999999996 2010-May-20 20:20:36 LOG4 log_alfabeam: ALFABEAM 1 11.980199092031265 9.095442027020081 2010-May-20 20:20:36 LOG4 log_alfabeam: ALFABEAM 2 11.977085714130578 9.009055998760951 2010-May-20 20:20:36 LOG4 log_alfabeam: ALFABEAM 3 11.980183189697060 8.913333863724500 2010-May-20 20:20:36 LOG4 log_alfabeam: ALFABEAM 4 11.986489112990382 8.904686242379224 2010-May-20 20:20:36 LOG4 log_alfabeam: ALFABEAM 5 11.989605263604636 8.991813335602659 2010-May-20 20:20:36 LOG4 log_alfabeam: ALFABEAM 6 11.986412865054451 9.086842050799673 2010-May-20 20:20:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000124 2010-May-20 20:20:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:20:37 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2010-May-20 20:20:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:20:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-May-20 20:20:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:20:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:20:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:20:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-May-20 20:20:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1238.00 2010-May-20 20:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:20:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:20:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:20:48 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2010-May-20 20:20:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:20:48 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-May-20 20:20:48 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2010-May-20 20:20:48 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-May-20 20:20:48 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-May-20 20:20:48 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:20:48 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:20:48 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:20:48 LOG2 antvel: Parameters to Doppler: Topocentric 87648 2010 140 0.0 2010-May-20 20:20:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:20:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-May-20 20:20:48 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-May-20 20:20:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:20:48 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:20:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-May-20 20:20:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:20:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2010-May-20 20:20:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:20:48 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-May-20 20:20:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2010-May-20 20:20:48 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.799297 2010.3856201992548 18.999933 2010-May-20 20:20:48 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333315 9.000000000000000 2010-May-20 20:20:48 LOG4 log_alfabeam: ALFABEAM 1 11.980229106637180 9.095657019598283 2010-May-20 20:20:48 LOG4 log_alfabeam: ALFABEAM 2 11.977088638868530 9.009486966929478 2010-May-20 20:20:48 LOG4 log_alfabeam: ALFABEAM 3 11.980155974607378 8.913551965745906 2010-May-20 20:20:48 LOG4 log_alfabeam: ALFABEAM 4 11.986459186211290 8.904469957296820 2010-May-20 20:20:48 LOG4 log_alfabeam: ALFABEAM 5 11.989602640387828 8.991381981579213 2010-May-20 20:20:48 LOG4 log_alfabeam: ALFABEAM 6 11.986440042362679 9.086629083179419 2010-May-20 20:20:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000125 2010-May-20 20:20:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:20:49 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2010-May-20 20:20:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:20:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-May-20 20:20:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:20:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:20:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:20:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-May-20 20:20:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1250.00 2010-May-20 20:20:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:20:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:20:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:20:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:20:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:20:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:20:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:20:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:20:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:21:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:21:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:21:00 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2010-May-20 20:21:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:21:00 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-May-20 20:21:00 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2010-May-20 20:21:00 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-May-20 20:21:00 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-May-20 20:21:00 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:21:00 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:21:00 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:21:00 LOG2 antvel: Parameters to Doppler: Topocentric 87660 2010 140 0.0 2010-May-20 20:21:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:21:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-May-20 20:21:00 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-May-20 20:21:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:21:00 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:21:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-May-20 20:21:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:21:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2010-May-20 20:21:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:21:00 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-May-20 20:21:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2010-May-20 20:21:00 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.802639 2010.3856205795119 18.999933 2010-May-20 20:21:00 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333327 9.000000000000005 2010-May-20 20:21:00 LOG4 log_alfabeam: ALFABEAM 1 11.980259266315780 9.095870488867185 2010-May-20 20:21:00 LOG4 log_alfabeam: ALFABEAM 2 11.977091706874862 9.009918834283980 2010-May-20 20:21:00 LOG4 log_alfabeam: ALFABEAM 3 11.980128758784868 8.913772514606164 2010-May-20 20:21:00 LOG4 log_alfabeam: ALFABEAM 4 11.986429113807528 8.904255180728571 2010-May-20 20:21:00 LOG4 log_alfabeam: ALFABEAM 5 11.989599874405728 8.990949683386578 2010-May-20 20:21:00 LOG4 log_alfabeam: ALFABEAM 6 11.986467223580728 9.086413687408363 2010-May-20 20:21:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000126 2010-May-20 20:21:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:21:01 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2010-May-20 20:21:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:21:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-May-20 20:21:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:21:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:21:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:21:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-May-20 20:21:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1262.00 2010-May-20 20:21:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:21:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:21:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:21:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:21:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:21:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:21:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:21:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:21:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:21:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:21:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:21:12 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2010-May-20 20:21:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:21:12 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-May-20 20:21:12 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2010-May-20 20:21:12 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-May-20 20:21:12 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-May-20 20:21:12 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:21:12 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:21:12 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:21:12 LOG2 antvel: Parameters to Doppler: Topocentric 87672 2010 140 0.0 2010-May-20 20:21:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:21:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-May-20 20:21:12 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-May-20 20:21:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:21:12 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:21:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-May-20 20:21:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:21:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2010-May-20 20:21:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:21:12 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-May-20 20:21:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2010-May-20 20:21:12 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.805982 2010.3856209597689 18.999933 2010-May-20 20:21:12 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333322 9.000000000000000 2010-May-20 20:21:12 LOG4 log_alfabeam: ALFABEAM 1 11.980289588007944 9.096082532763450 2010-May-20 20:21:12 LOG4 log_alfabeam: ALFABEAM 2 11.977094920973332 9.010351833289727 2010-May-20 20:21:12 LOG4 log_alfabeam: ALFABEAM 3 11.980101528065230 8.913995646008596 2010-May-20 20:21:12 LOG4 log_alfabeam: ALFABEAM 4 11.986398878872956 8.904041814023264 2010-May-20 20:21:12 LOG4 log_alfabeam: ALFABEAM 5 11.989596962975156 8.990516207987953 2010-May-20 20:21:12 LOG4 log_alfabeam: ALFABEAM 6 11.986494422883847 9.086195730267546 2010-May-20 20:21:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000127 2010-May-20 20:21:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:21:13 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2010-May-20 20:21:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:21:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-May-20 20:21:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:21:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:21:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:21:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-May-20 20:21:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1274.00 2010-May-20 20:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:21:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:21:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:21:24 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2010-May-20 20:21:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:21:24 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-May-20 20:21:24 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-May-20 20:21:24 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-20 20:21:24 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-20 20:21:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-20 20:21:24 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-May-20 20:21:24 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-20 20:21:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-20 20:21:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-20 20:21:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-20 20:21:24 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-May-20 20:21:24 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2010-May-20 20:21:24 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-May-20 20:21:24 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-May-20 20:21:24 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:21:24 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:21:24 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:21:24 LOG2 antvel: Parameters to Doppler: Topocentric 87684 2010 140 0.0 2010-May-20 20:21:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:21:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-May-20 20:21:24 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-May-20 20:21:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:21:24 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:21:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-May-20 20:21:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:21:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2010-May-20 20:21:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:21:24 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2010-May-20 20:21:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2010-May-20 20:21:24 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.809324 2010.3856213400259 18.999933 2010-May-20 20:21:24 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333322 8.999999999999998 2010-May-20 20:21:24 LOG4 log_alfabeam: ALFABEAM 1 11.980320052424199 9.096292994681207 2010-May-20 20:21:24 LOG4 log_alfabeam: ALFABEAM 2 11.977098280206532 9.010785678491361 2010-May-20 20:21:24 LOG4 log_alfabeam: ALFABEAM 3 11.980074300881517 8.914221229680692 2010-May-20 20:21:24 LOG4 log_alfabeam: ALFABEAM 4 11.986368500627863 8.903830014651154 2010-May-20 20:21:24 LOG4 log_alfabeam: ALFABEAM 5 11.989593906831779 8.990081840820066 2010-May-20 20:21:24 LOG4 log_alfabeam: ALFABEAM 6 11.986521621888977 9.085975338322259 2010-May-20 20:21:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000128 2010-May-20 20:21:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:21:25 LOG5 begin_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2010-May-20 20:21:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:21:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-May-20 20:21:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:21:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:21:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:21:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-May-20 20:21:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1286.00 2010-May-20 20:21:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:21:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:21:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:21:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:21:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:21:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:21:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:21:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:21:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:21:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:21:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:21:36 LOG5 end_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2010-May-20 20:21:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:21:36 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2010-May-20 20:21:36 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2010-May-20 20:21:36 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-May-20 20:21:36 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-May-20 20:21:36 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:21:36 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:21:36 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:21:36 LOG2 antvel: Parameters to Doppler: Topocentric 87696 2010 140 0.0 2010-May-20 20:21:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:21:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-May-20 20:21:36 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-May-20 20:21:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:21:36 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:21:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-May-20 20:21:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:21:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2010-May-20 20:21:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:21:36 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2010-May-20 20:21:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2010-May-20 20:21:36 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.812667 2010.3856217202829 18.999933 2010-May-20 20:21:36 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333324 9.000000000000000 2010-May-20 20:21:36 LOG4 log_alfabeam: ALFABEAM 1 11.980350676604333 9.096501970876956 2010-May-20 20:21:36 LOG4 log_alfabeam: ALFABEAM 2 11.977101787528067 9.011220602673333 2010-May-20 20:21:36 LOG4 log_alfabeam: ALFABEAM 3 11.980047063101626 8.914449403337578 2010-May-20 20:21:36 LOG4 log_alfabeam: ALFABEAM 4 11.986337962066603 8.903619685633769 2010-May-20 20:21:36 LOG4 log_alfabeam: ALFABEAM 5 11.989590703162035 8.989646348492583 2010-May-20 20:21:36 LOG4 log_alfabeam: ALFABEAM 6 11.986548834741784 9.085752376339972 2010-May-20 20:21:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000129 2010-May-20 20:21:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:21:37 LOG5 begin_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2010-May-20 20:21:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:21:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-May-20 20:21:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:21:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:21:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:21:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-May-20 20:21:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1298.00 2010-May-20 20:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:21:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:21:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:21:48 LOG5 end_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2010-May-20 20:21:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:21:48 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2010-May-20 20:21:48 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2010-May-20 20:21:48 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-May-20 20:21:48 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-May-20 20:21:48 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:21:48 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:21:48 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:21:48 LOG2 antvel: Parameters to Doppler: Topocentric 87708 2010 140 0.0 2010-May-20 20:21:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:21:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-May-20 20:21:48 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-May-20 20:21:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:21:48 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:21:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-May-20 20:21:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:21:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2010-May-20 20:21:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:21:48 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2010-May-20 20:21:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2010-May-20 20:21:48 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.816009 2010.3856221005401 18.999933 2010-May-20 20:21:48 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333320 9.000000000000000 2010-May-20 20:21:48 LOG4 log_alfabeam: ALFABEAM 1 11.980381440994179 9.096709306724600 2010-May-20 20:21:48 LOG4 log_alfabeam: ALFABEAM 2 11.977105441759267 9.011656318373973 2010-May-20 20:21:48 LOG4 log_alfabeam: ALFABEAM 3 11.980019833200588 8.914680032673646 2010-May-20 20:21:48 LOG4 log_alfabeam: ALFABEAM 4 11.986307282674693 8.903410982490083 2010-May-20 20:21:48 LOG4 log_alfabeam: ALFABEAM 5 11.989587352921030 8.989210018524215 2010-May-20 20:21:48 LOG4 log_alfabeam: ALFABEAM 6 11.986576043012057 9.085526974871833 2010-May-20 20:21:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000130 2010-May-20 20:21:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:21:49 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2010-May-20 20:21:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:21:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-May-20 20:21:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:21:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:21:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:21:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-May-20 20:21:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1310.00 2010-May-20 20:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:22:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:22:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:22:00 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2010-May-20 20:22:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:22:00 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2010-May-20 20:22:00 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2010-May-20 20:22:00 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-May-20 20:22:00 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-May-20 20:22:00 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:22:00 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:22:00 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:22:00 LOG2 antvel: Parameters to Doppler: Topocentric 87720 2010 140 0.0 2010-May-20 20:22:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:22:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-May-20 20:22:00 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-May-20 20:22:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:22:00 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:22:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-May-20 20:22:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:22:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2010-May-20 20:22:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:22:00 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2010-May-20 20:22:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2010-May-20 20:22:00 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.819352 2010.3856224807971 18.999933 2010-May-20 20:22:00 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333313 9.000000000000002 2010-May-20 20:22:00 LOG4 log_alfabeam: ALFABEAM 1 11.980412362729281 9.096915096779629 2010-May-20 20:22:00 LOG4 log_alfabeam: ALFABEAM 2 11.977109245983097 9.012093058652582 2010-May-20 20:22:00 LOG4 log_alfabeam: ALFABEAM 3 11.979992597081244 8.914913257391561 2010-May-20 20:22:00 LOG4 log_alfabeam: ALFABEAM 4 11.986276445350047 8.903203809935405 2010-May-20 20:22:00 LOG4 log_alfabeam: ALFABEAM 5 11.989583853165193 8.988772617215966 2010-May-20 20:22:00 LOG4 log_alfabeam: ALFABEAM 6 11.986603260813180 9.085298996695027 2010-May-20 20:22:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000131 2010-May-20 20:22:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:22:01 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2010-May-20 20:22:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:22:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-May-20 20:22:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:22:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:22:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:22:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-May-20 20:22:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1322.00 2010-May-20 20:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:22:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:22:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:22:12 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2010-May-20 20:22:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:22:12 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2010-May-20 20:22:12 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2010-May-20 20:22:12 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-May-20 20:22:12 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-May-20 20:22:12 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:22:12 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:22:12 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:22:12 LOG2 antvel: Parameters to Doppler: Topocentric 87732 2010 140 0.0 2010-May-20 20:22:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:22:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-May-20 20:22:12 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-May-20 20:22:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:22:12 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:22:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-May-20 20:22:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:22:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2010-May-20 20:22:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:22:12 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2010-May-20 20:22:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2010-May-20 20:22:12 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.822694 2010.3856228610541 18.999933 2010-May-20 20:22:12 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333313 9.000000000000000 2010-May-20 20:22:12 LOG4 log_alfabeam: ALFABEAM 1 11.980443421993563 9.097119188517448 2010-May-20 20:22:12 LOG4 log_alfabeam: ALFABEAM 2 11.977113198794855 9.012530534127562 2010-May-20 20:22:12 LOG4 log_alfabeam: ALFABEAM 3 11.979965373252931 8.915148939117518 2010-May-20 20:22:12 LOG4 log_alfabeam: ALFABEAM 4 11.986245469840801 8.902998321415769 2010-May-20 20:22:12 LOG4 log_alfabeam: ALFABEAM 5 11.989580205074100 8.988334434083955 2010-May-20 20:22:12 LOG4 log_alfabeam: ALFABEAM 6 11.986630469675294 9.085068576384000 2010-May-20 20:22:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000132 2010-May-20 20:22:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:22:13 LOG5 begin_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2010-May-20 20:22:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:22:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-May-20 20:22:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:22:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:22:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:22:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-May-20 20:22:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1334.00 2010-May-20 20:22:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:22:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:22:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:22:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:22:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:22:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:22:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:22:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:22:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:22:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:22:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:22:24 LOG5 end_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2010-May-20 20:22:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:22:24 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2010-May-20 20:22:24 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2010-May-20 20:22:24 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-May-20 20:22:24 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-May-20 20:22:24 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:22:24 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:22:24 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:22:24 LOG2 antvel: Parameters to Doppler: Topocentric 87744 2010 140 0.0 2010-May-20 20:22:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:22:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-May-20 20:22:24 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-May-20 20:22:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:22:24 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:22:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-May-20 20:22:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:22:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2010-May-20 20:22:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:22:24 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2010-May-20 20:22:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2010-May-20 20:22:24 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.826037 2010.3856232413111 18.999933 2010-May-20 20:22:24 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333348 8.999999999999995 2010-May-20 20:22:24 LOG4 log_alfabeam: ALFABEAM 1 11.980474636015080 9.097321674773324 2010-May-20 20:22:24 LOG4 log_alfabeam: ALFABEAM 2 11.977117303406381 9.012968978089138 2010-May-20 20:22:24 LOG4 log_alfabeam: ALFABEAM 3 11.979938147656162 8.915387219516592 2010-May-20 20:22:24 LOG4 log_alfabeam: ALFABEAM 4 11.986214338951612 8.902794423359843 2010-May-20 20:22:24 LOG4 log_alfabeam: ALFABEAM 5 11.989576405574599 8.987895235164848 2010-May-20 20:22:24 LOG4 log_alfabeam: ALFABEAM 6 11.986657683676734 9.084835574749688 2010-May-20 20:22:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000133 2010-May-20 20:22:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:22:25 LOG5 begin_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2010-May-20 20:22:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:22:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-May-20 20:22:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:22:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:22:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:22:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-May-20 20:22:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1346.00 2010-May-20 20:22:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:22:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:22:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:22:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:22:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:22:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:22:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:22:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:22:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:22:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:22:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:22:36 LOG5 end_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2010-May-20 20:22:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:22:36 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2010-May-20 20:22:36 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2010-May-20 20:22:36 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-May-20 20:22:36 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-May-20 20:22:36 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:22:36 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:22:36 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:22:36 LOG2 antvel: Parameters to Doppler: Topocentric 87756 2010 140 0.0 2010-May-20 20:22:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:22:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-May-20 20:22:36 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-May-20 20:22:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:22:36 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:22:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-May-20 20:22:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:22:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2010-May-20 20:22:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-20 20:22:36 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2010-May-20 20:22:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2010-May-20 20:22:36 LOG5 log_alfabeam: Parameters: 11.983333333333333 9.0 11.829379 2010.3856236215681 18.999933 2010-May-20 20:22:36 LOG4 log_alfabeam: ALFABEAM 0 11.983333333333313 9.000000000000000 2010-May-20 20:22:36 LOG4 log_alfabeam: ALFABEAM 1 11.980505984718976 9.097522405246339 2010-May-20 20:22:36 LOG4 log_alfabeam: ALFABEAM 2 11.977121558182134 9.013408099326840 2010-May-20 20:22:36 LOG4 log_alfabeam: ALFABEAM 3 11.979910938826562 8.915627956115804 2010-May-20 20:22:36 LOG4 log_alfabeam: ALFABEAM 4 11.986183072690162 8.902592267018331 2010-May-20 20:22:36 LOG4 log_alfabeam: ALFABEAM 5 11.989572456075507 8.987455311882895 2010-May-20 20:22:36 LOG4 log_alfabeam: ALFABEAM 6 11.986684884315782 9.084600130423130 2010-May-20 20:22:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 14000134 2010-May-20 20:22:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-20 20:22:37 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2010-May-20 20:22:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:22:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-May-20 20:22:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:22:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:22:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:22:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-May-20 20:22:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1358.00 2010-May-20 20:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:22:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:22:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-20 20:22:48 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2010-May-20 20:22:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-20 20:22:48 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2010-May-20 20:22:48 INFO2 smartfreq: Switching off CAL 2010-May-20 20:22:48 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-20 20:22:48 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-20 20:22:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-20 20:22:48 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2010-May-20 20:22:48 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-20 20:22:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-20 20:22:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-20 20:22:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-20 20:22:48 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2010-May-20 20:22:48 INFO3 restore_frequencies: Restoring original frequencies 2010-May-20 20:22:48 LOG5 antvel: Calling 'antvel 115900.000000 90000.000000 J Topocentric 0' 2010-May-20 20:22:48 LOG2 antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:22:48 LOG2 antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:22:48 LOG2 antvel: Parameters to Doppler: Topocentric 87768 2010 140 0.0 2010-May-20 20:22:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:22:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2010-May-20 20:22:48 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2010-May-20 20:22:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:22:48 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:22:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-May-20 20:22:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:22:48 STOP finish_task: Finishing task 'smart frequency switching' 2010-May-20 20:22:48 LOG5 finish_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2010-May-20 20:22:48 DONE finish_task: DONE finished pattern: smart frequency switching 2010-May-20 20:22:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-20 20:22:48 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2010-May-20 20:22:48 LOG5 end_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2010-May-20 20:22:48 COMMAND run_command_line: EXECUTING command 27: 'LOAD ages_mock.conf' 2010-May-20 20:22:49 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-May-20 20:22:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-May-20 20:22:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:22:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:22:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:22:49 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-20 20:22:49 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-May-20 20:22:49 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2010-May-20 20:22:49 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2010-May-20 20:22:49 LOG2 CIMA-antvel: Precessing RA = 11:59:00.0 Dec = +09:00:00.0 Epoch = 2010.38562 J 2010-May-20 20:22:49 LOG2 CIMA-antvel: Computed apparent RA = 11:59:33.5 Dec = +08:56:24.4 2010-May-20 20:22:49 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 87768 2010 140 0.0 2010-May-20 20:22:49 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-May-20 20:22:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-May-20 20:22:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-May-20 20:22:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-May-20 20:22:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-May-20 20:22:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-May-20 20:22:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2010-May-20 20:22:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-May-20 20:22:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2010-May-20 20:22:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2010-May-20 20:22:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2010-May-20 20:22:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2010-May-20 20:22:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2010-May-20 20:22:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2010-May-20 20:22:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2010-May-20 20:22:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2010-May-20 20:22:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2010-May-20 20:22:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-May-20 20:22:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-20 20:22:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2010-May-20 20:22:51 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2010-May-20 20:22:52 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2010-May-20 20:22:52 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2010-May-20 20:22:52 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2010-May-20 20:22:52 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-20 20:22:52 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-May-20 20:22:52 LOG5 begin_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2010-May-20 20:22:52 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-May-20 20:22:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-May-20 20:22:52 LOG1 config_iflo: Receiver ALFA already selected 2010-May-20 20:22:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-20 20:22:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-20 20:22:52 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-20 20:22:52 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2010-May-20 20:22:52 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-20 20:22:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-20 20:22:52 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2010-May-20 20:22:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-20 20:22:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-20 20:22:52 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-May-20 20:22:52 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-May-20 20:22:52 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-May-20 20:22:52 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-May-20 20:22:52 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-May-20 20:22:52 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-May-20 20:22:52 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-May-20 20:22:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2010-May-20 20:22:52 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-May-20 20:22:52 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-May-20 20:22:52 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-May-20 20:22:52 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-May-20 20:22:52 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-May-20 20:22:52 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-May-20 20:22:52 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-May-20 20:22:52 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-May-20 20:22:52 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-May-20 20:22:52 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-May-20 20:22:52 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-May-20 20:22:52 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-May-20 20:22:52 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-May-20 20:22:52 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-May-20 20:22:52 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-May-20 20:22:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:22:52 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-May-20 20:22:52 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-May-20 20:22:52 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-May-20 20:22:52 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-May-20 20:22:52 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-May-20 20:22:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-May-20 20:22:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-20 20:22:52 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-May-20 20:22:52 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2010-May-20 20:22:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2010-May-20 20:22:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-May-20 20:22:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:22:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-20 20:22:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:22:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:22:52 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-May-20 20:22:52 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-May-20 20:22:52 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2010-May-20 20:22:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-May-20 20:22:52 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-May-20 20:22:52 LOG5 finish_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2010-May-20 20:22:52 DONE finish_task: DONE finished configuration: IF/LO path 2010-May-20 20:22:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-20 20:22:52 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-May-20 20:22:52 LOG5 end_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2010-May-20 20:22:52 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-May-20 20:22:52 LOG5 begin_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2010-May-20 20:22:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-May-20 20:22:52 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-May-20 20:22:52 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-May-20 20:22:52 START begin_task: Starting task 'selecting calibration port' 2010-May-20 20:22:52 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2010-May-20 20:22:53 LOG3 vw_send: To DATATAKING: calport 3 2010-May-20 20:22:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-May-20 20:22:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-20 20:22:53 START begin_task: Starting task 'waiting on calport' 2010-May-20 20:22:53 LOG5 begin_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2010-May-20 20:22:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:22:53 LOG4 got_cormsg: From DATATAKING: calport 3 2010-May-20 20:22:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-20 20:22:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:22:53 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-20 20:22:53 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-May-20 20:22:53 LOG5 end_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2010-May-20 20:22:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-May-20 20:22:53 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-May-20 20:22:53 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2010-May-20 20:22:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-20 20:22:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-20 20:22:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-20 20:22:53 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2010-May-20 20:22:53 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-20 20:22:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:22:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-20 20:22:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-20 20:22:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-20 20:22:53 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2010-May-20 20:22:53 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-May-20 20:22:53 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-May-20 20:22:53 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-May-20 20:22:53 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-May-20 20:22:53 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-May-20 20:22:53 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-May-20 20:22:53 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-May-20 20:22:53 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-May-20 20:22:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-20 20:22:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-20 20:22:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-20 20:22:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-20 20:22:53 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-May-20 20:22:53 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-May-20 20:22:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-20 20:22:53 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2010-May-20 20:22:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-May-20 20:22:53 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-20 20:22:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-May-20 20:22:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-20 20:22:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-20 20:22:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-20 20:22:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-20 20:22:53 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2010-May-20 20:22:53 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-May-20 20:22:53 STOP finish_task: Finishing task 'configuring WAPPs' 2010-May-20 20:22:53 LOG5 finish_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2010-May-20 20:22:53 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-May-20 20:22:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-20 20:22:53 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-May-20 20:22:54 LOG5 end_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2010-May-20 20:22:54 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2010-May-20 20:22:54 LOG5 begin_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2010-May-20 20:22:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2010-May-20 20:22:54 INFO1 config_mock: Starting to configure the Mock spectrometer 2010-May-20 20:22:54 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-May-20 20:22:54 START begin_task: Starting task 'selecting calibration port' 2010-May-20 20:22:54 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2010-May-20 20:22:54 LOG3 vw_send: To DATATAKING: calport 3 2010-May-20 20:22:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-May-20 20:22:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-20 20:22:54 START begin_task: Starting task 'waiting on calport' 2010-May-20 20:22:54 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2010-May-20 20:22:54 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-May-20 20:22:54 LOG4 got_cormsg: From DATATAKING: calport 3 2010-May-20 20:22:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-20 20:22:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:22:54 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-20 20:22:54 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-May-20 20:22:54 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2010-May-20 20:22:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-May-20 20:22:54 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-May-20 20:22:54 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2010-May-20 20:22:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-20 20:22:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-20 20:22:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-20 20:22:54 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2010-May-20 20:22:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:22:54 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-20 20:22:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-20 20:22:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-20 20:22:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-20 20:22:54 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2010-May-20 20:22:54 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-May-20 20:22:54 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-May-20 20:22:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-20 20:22:54 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2010-May-20 20:22:54 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-20 20:22:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-20 20:22:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-20 20:22:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-20 20:22:54 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2010-May-20 20:22:54 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2010-May-20 20:22:54 LOG3 socket_wait: To MOCK: NOP 2010-May-20 20:22:54 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2010-May-20 20:22:54 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2010-May-20 20:22:54 ALERT got_mock_message: Mock spectrometer restarting 2010-May-20 20:22:54 LOG4 from_mock: From MOCK: nop ok 2010-May-20 20:22:54 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2010-May-20 20:22:54 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2010-May-20 20:22:54 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2010-May-20 20:22:54 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2010-May-20 20:22:54 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2010-May-20 20:22:54 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2010-May-20 20:22:54 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2010-May-20 20:22:54 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2010-May-20 20:22:54 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2010-May-20 20:22:54 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2010-May-20 20:22:54 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2010-May-20 20:22:54 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2010-May-20 20:22:54 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2010-May-20 20:22:54 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2010-May-20 20:22:54 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2010-May-20 20:22:54 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2010-May-20 20:22:54 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2010-May-20 20:22:54 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2010-May-20 20:22:54 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2010-May-20 20:22:54 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2010-May-20 20:22:54 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2010-May-20 20:22:54 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2010-May-20 20:22:54 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2010-May-20 20:22:54 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2010-May-20 20:22:54 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2010-May-20 20:22:54 LOG4 from_mock: From MOCK: confok 2010-May-20 20:22:54 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2010-May-20 20:22:54 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2010-May-20 20:22:55 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2010-May-20 20:22:55 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2010-May-20 20:22:55 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2010-May-20 20:22:55 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2010-May-20 20:22:55 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-May-20 20:22:55 LOG4 from_mock: From MOCK: confok 2010-May-20 20:22:55 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2010-May-20 20:22:55 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-May-20 20:22:55 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2010-May-20 20:22:55 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2010-May-20 20:22:55 LOG5 finish_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2010-May-20 20:22:55 DONE finish_task: DONE finished configuring: the Mock spectrometer 2010-May-20 20:22:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-20 20:22:55 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2010-May-20 20:22:55 LOG5 end_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2010-May-20 20:22:55 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2010-May-20 20:22:55 COMMAND run_command_line: EXECUTING command 28: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2010-May-20 20:22:55 COMMAND run_command_line: EXECUTING command 29: 'CATALOG AGESFull.cat' 2010-May-20 20:22:55 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2010-May-20 20:22:55 COMMAND run_command_line: EXECUTING command 32: 'IF LSTSLEW(AGESVC1A_p2_032) < 114433 THEN' 2010-May-20 20:22:55 LOG3 is_if_valid: Current source data: up 334.5 11.2 UP - - 89 0.7 2010-May-20 20:22:55 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1A_p2_032) < 114433 2010-May-20 20:22:55 INFO5 is_if_valid: Condition parsed as: 11.846059666666667 < 11.7425 2010-May-20 20:22:55 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGESVC1A_p2_032) < 114433 THEN' 2010-May-20 20:22:55 COMMAND run_command_line: EXECUTING command 33: 'FIXEDDRIFT az=328.38 alfaangle=45.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_032 ra=120900.00 dec=81330.00' 2010-May-20 20:22:55 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=328.38 alfaangle=45.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_032 ra=120900.00 dec=81330.00' in non-true conditional branch 2010-May-20 20:22:55 COMMAND run_command_line: EXECUTING command 36: 'ENDIF' 2010-May-20 20:22:55 COMMAND run_command_line: EXECUTING command 39: 'IF LSTSLEW(AGESVC1A_p2_034) < 120733 THEN' 2010-May-20 20:22:56 LOG3 is_if_valid: Current source data: up 334.6 11.3 UP - - 88 0.7 2010-May-20 20:22:56 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1A_p2_034) < 120733 2010-May-20 20:22:56 INFO5 is_if_valid: Condition parsed as: 11.846059666666667 < 12.125833333333334 2010-May-20 20:22:56 COMMAND run_command_line: EXECUTING command 40: 'FIXEDDRIFT az=357.22 alfaangle=21.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_034 ra=120900.00 dec=81030.00' 2010-May-20 20:22:56 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-May-20 20:22:59 WARNING check_obsmode: WARNING failed to get a response from the CIMA frontend when checking options for 'fixed azimuth drift map'! 2010-May-20 20:22:59 NOTE check_obsmode: Assuming that the options are OK 2010-May-20 20:22:59 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 357.22 21.4 hcorcal 5 tracking no off lcorcal first 1 AGESVC1A_p2_034 120900.00 81030.00 J 8500.0 Heliocentric velocity(optical)' 2010-May-20 20:22:59 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-May-20 20:22:59 LOG5 begin_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2010-May-20 20:22:59 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'galfasrc' 2010-May-20 20:22:59 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-May-20 20:22:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_034} 2010-May-20 20:22:59 INFO3 fixed_driftmap: Sending telescope to Az = 357.22 and ZA = 10.25 2010-May-20 20:22:59 LOG3 track_source: Calling 'track_source AGESVC1A_p2_034 357.22 10.2502749675 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-20 20:22:59 START begin_task: Starting task 'sending tracking commands' 2010-May-20 20:22:59 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2010-May-20 20:22:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_034} INFO {Slewing to source 'AGESVC1A_p2_034' ...} 2010-May-20 20:22:59 INFO1 track_source: Starting to track AGESVC1A_p2_034 2010-May-20 20:22:59 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_034" 2010-May-20 20:22:59 LOG3 vw_send: To DATATAKING: set ra 357.22 2010-May-20 20:22:59 LOG3 vw_send: To DATATAKING: set dec 10.2502749675 2010-May-20 20:22:59 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-20 20:22:59 LOG3 vw_send: To DATATAKING: pnt tr 357.22 10.2502749675 -CF 2010-May-20 20:22:59 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-20 20:22:59 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-20 20:22:59 LOG5 finish_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2010-May-20 20:23:03 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-20 20:23:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 20:23:03 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-20 20:23:03 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2010-May-20 20:23:03 START begin_task: Starting task 'rotate ALFA to +21.4 degrees' 2010-May-20 20:23:03 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2010-May-20 20:23:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +21.4 degrees ...} 2010-May-20 20:23:03 INFO2 rotate_alfa: ALFA commanded to +21.4 degrees 2010-May-20 20:23:03 LOG3 sock_errsend: To ALFAMOTOR: POSITION 21.4 REPLY 2010-May-20 20:23:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-May-20 20:23:03 START begin_task: Starting task 'waiting on ALFA rotation' 2010-May-20 20:23:03 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2010-May-20 20:23:03 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-20 20:23:03 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_034" 2010-May-20 20:23:03 LOG4 got_cormsg: From DATATAKING: set ra 357.22 2010-May-20 20:23:03 LOG4 got_cormsg: From DATATAKING: set dec 10.2502749675 2010-May-20 20:23:03 LOG4 got_cormsg: From DATATAKING: vw% 357.22 2010-May-20 20:23:03 LOG4 got_cormsg: From DATATAKING: vw% 10.2502749675 2010-May-20 20:23:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:23:03 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-20 20:23:03 LOG4 got_cormsg: From DATATAKING: pnt tr 357.22 10.2502749675 -CF 2010-May-20 20:23:03 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-20 20:23:03 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-20 20:23:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:23:05 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-May-20 20:23:05 INFO3 alfa_motor: ALFA rotator in-position +21.40 degrees 2010-May-20 20:23:05 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-May-20 20:23:05 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2010-May-20 20:23:05 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-20 20:23:05 STOP finish_task: Finishing task 'rotate ALFA to +21.4 degrees' 2010-May-20 20:23:05 LOG5 finish_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2010-May-20 20:23:05 INFO2 finish_task: DONE finished configuration: rotating ALFA to +21.4 degrees 2010-May-20 20:23:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 20:23:05 STOP end_task: Finishing task 'rotate ALFA to +21.4 degrees' with status 'OK' 2010-May-20 20:23:05 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2010-May-20 20:23:05 START begin_task: Starting task 'waiting on telescope' 2010-May-20 20:23:05 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-May-20 20:23:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-20 20:23:05 LOG3 waittrk: Start waittrk 5 2010-May-20 20:23:05 START begin_task: Starting task 'waiting on telescope movement' 2010-May-20 20:23:05 LOG5 begin_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2010-May-20 20:23:10 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-20 20:23:10 LOG5 end_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2010-May-20 20:23:10 START begin_task: Starting task 'waiting on telescope on source' 2010-May-20 20:23:10 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2010-May-20 20:23:41 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-20 20:23:41 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2010-May-20 20:23:41 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-20 20:23:41 INFO2 waittrk: Now tracking AGESVC1A_p2_034 2010-May-20 20:23:41 LOG4 waittrk: Current telescope position: Az = 356.86 ZA = 10.22 2010-May-20 20:23:41 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-20 20:23:41 LOG5 finish_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-May-20 20:23:41 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-20 20:23:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 20:23:41 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-20 20:23:41 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-May-20 20:23:41 START begin_task: Starting task 'selecting calibration type' 2010-May-20 20:23:41 LOG5 begin_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2010-May-20 20:23:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-20 20:23:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-20 20:23:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-20 20:23:41 START begin_task: Starting task 'waiting on setcal' 2010-May-20 20:23:41 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2010-May-20 20:23:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-20 20:23:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-20 20:23:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:23:41 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-20 20:23:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-20 20:23:41 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2010-May-20 20:23:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-20 20:23:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-20 20:23:41 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-20 20:23:41 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-20 20:23:41 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2010-May-20 20:23:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:23:41 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-20 20:23:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-20 20:23:41 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2010-May-20 20:23:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-20 20:23:41 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-20 20:23:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-20 20:23:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-20 20:23:41 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-20 20:23:41 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2010-May-20 20:23:41 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-20 20:23:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-20 20:23:41 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2010-May-20 20:23:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-20 20:23:41 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-20 20:23:41 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-20 20:23:41 LOG5 end_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2010-May-20 20:23:41 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2010-May-20 20:23:41 INFO2 astwait: Waiting for 940 seconds from 00:23:41 to 00:39:21 UTC ... 2010-May-20 20:23:41 LOG4 send_obs_status: To obs_status: <1> TASKTIME 940 BITMAP stat_wait MESSAGE {Waiting ...} 2010-May-20 20:23:41 START begin_task: Starting task 'waiting on waiting for AST time' 2010-May-20 20:23:41 LOG5 begin_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2010-May-20 20:39:21 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2010-May-20 20:39:21 LOG5 end_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2010-May-20 20:39:21 INFO3 astwait: Finished waiting 2010-May-20 20:39:21 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-May-20 20:39:21 LOG5 dopset_later: Calling 'dopset_later 60.946531504873221' 2010-May-20 20:39:21 INFO3 dopset_later: Setting Doppler correction for 20:40:21 (60.9 seconds from now) 2010-May-20 20:39:21 LOG5 antvel: Calling 'antvel 357.220000 10.250275 F Heliocentric 60.946531504873221' 2010-May-20 20:39:21 LOG2 antvel: Transforming current Az = 357.22 ZA = 10.25 to apparent RA = 12:09:33.3 Dec = +08:06:54.1 2010-May-20 20:39:21 LOG2 antvel: Parameters to Doppler: Heliocentric 88821 2010 140 0.0 2010-May-20 20:39:21 INFO5 antvel: Computed antenna velocity: +25.28534 km/s 2010-May-20 20:39:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=25.285337245099999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-May-20 20:39:21 INFO4 dopset_gen: New sky frequencies: 1381.126940 1381.126940 1381.126940 1381.126940 1381.126940 1381.126940 1381.126940 1381.126940 1381.126940 2010-May-20 20:39:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.126940 sky0=1381.126940 sky1=1381.126940 sky2=1381.126940 sky3=1381.126940 sky4=1381.126940 sky5=1381.126940 sky6=1381.126940 sky7=1381.126940 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 20:39:21 LOG2 dopset_gen: Result from 'sky2syn': 1631.126940 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 20:39:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631126940.0} 2010-May-20 20:39:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:39:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2010-May-20 20:39:21 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2010-May-20 20:39:21 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.5 Dec = +08:10:22.1 2010-May-20 20:39:21 LOG3 track_source: Calling 'track_source AGESVC1A_p2_034 120803.5 081022.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-20 20:39:21 START begin_task: Starting task 'sending tracking commands' 2010-May-20 20:39:21 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2010-May-20 20:39:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_034} INFO {Slewing to source 'AGESVC1A_p2_034' ...} 2010-May-20 20:39:21 INFO1 track_source: Starting to track AGESVC1A_p2_034 2010-May-20 20:39:21 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_034" 2010-May-20 20:39:21 LOG3 vw_send: To DATATAKING: set ra 120803.5 2010-May-20 20:39:21 LOG3 vw_send: To DATATAKING: set dec 081022.1 2010-May-20 20:39:21 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-20 20:39:21 LOG3 vw_send: To DATATAKING: pnt tr 120803.5 081022.1 -CJ 2010-May-20 20:39:21 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-20 20:39:21 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-20 20:39:21 LOG5 finish_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2010-May-20 20:39:21 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-20 20:39:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 20:39:21 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-20 20:39:21 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2010-May-20 20:39:21 START begin_task: Starting task 'waiting on telescope' 2010-May-20 20:39:21 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2010-May-20 20:39:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-20 20:39:21 LOG3 waittrk: Start waittrk 5 2010-May-20 20:39:21 START begin_task: Starting task 'waiting on telescope movement' 2010-May-20 20:39:21 LOG5 begin_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2010-May-20 20:39:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631126940.0} 2010-May-20 20:39:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 20:39:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:39:21 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_034" 2010-May-20 20:39:21 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-20 20:39:21 LOG4 got_cormsg: From DATATAKING: set ra 120803.5 2010-May-20 20:39:21 LOG4 got_cormsg: From DATATAKING: set dec 081022.1 2010-May-20 20:39:21 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-20 20:39:21 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.5 081022.1 -CJ 2010-May-20 20:39:21 LOG4 got_cormsg: From DATATAKING: 120803.5 2010-May-20 20:39:21 LOG4 got_cormsg: From DATATAKING: vw% 081022.1 2010-May-20 20:39:21 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2010-May-20 20:39:21 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-20 20:39:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:39:26 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-20 20:39:26 LOG5 end_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2010-May-20 20:39:26 START begin_task: Starting task 'waiting on telescope on source' 2010-May-20 20:39:26 LOG5 begin_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2010-May-20 20:39:28 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-20 20:39:28 LOG5 end_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2010-May-20 20:39:28 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-20 20:39:28 INFO2 waittrk: Now tracking AGESVC1A_p2_034 2010-May-20 20:39:28 LOG4 waittrk: Current telescope position: Az = 356.96 ZA = 10.22 2010-May-20 20:39:28 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-20 20:39:28 LOG5 finish_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2010-May-20 20:39:28 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-20 20:39:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 20:39:28 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-20 20:39:28 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2010-May-20 20:39:28 START begin_task: Starting task 'adjusting WAPP+Mock power' 2010-May-20 20:39:28 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2010-May-20 20:39:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2010-May-20 20:39:28 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2010-May-20 20:39:28 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-May-20 20:39:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-May-20 20:39:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-20 20:39:28 START begin_task: Starting task 'waiting on adjpwrif2' 2010-May-20 20:39:28 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2010-May-20 20:39:29 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-May-20 20:39:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-20 20:39:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:39:32 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-20 20:39:32 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-May-20 20:39:32 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2010-May-20 20:39:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-May-20 20:39:32 START begin_task: Starting task 'adjusting WAPP power' 2010-May-20 20:39:32 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2010-May-20 20:39:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-20 20:39:32 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-May-20 20:39:32 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-May-20 20:39:32 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-May-20 20:39:32 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-May-20 20:39:32 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-May-20 20:39:32 LOG5 begin_task: Level: (5) ID = <10149> Status = 0 0 0 0 ok 2010-May-20 20:39:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-May-20 20:39:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:39:32 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-May-20 20:39:32 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 4 3 dB 2010-May-20 20:39:32 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 5 dB 2010-May-20 20:39:32 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-May-20 20:39:32 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-May-20 20:39:32 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-May-20 20:39:32 LOG5 end_task: Level: (5) ID = <10149> Status = 0 0 0 0 ok 2010-May-20 20:39:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.972 0.966 ALFA beam 1: 1.029 1.061 2010-May-20 20:39:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.976 0.948 ALFA beam 3: 0.910 1.008 2010-May-20 20:39:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.927 0.924 ALFA beam 5: 0.973 1.035 2010-May-20 20:39:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.941 0.897 ALFA beam 7: 1.021 1.049 2010-May-20 20:39:32 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-20 20:39:32 LOG5 finish_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2010-May-20 20:39:32 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-May-20 20:39:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 20:39:32 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-20 20:39:32 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2010-May-20 20:39:32 START begin_task: Starting task 'adjusting Mock spectrometer power' 2010-May-20 20:39:32 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2010-May-20 20:39:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-20 20:39:33 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2010-May-20 20:39:33 LOG3 socket_wait: To MOCK: ADJP30 2010-May-20 20:39:33 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2010-May-20 20:39:33 LOG5 begin_task: Level: (5) ID = <10151> Status = 0 0 0 0 ok 2010-May-20 20:39:38 INFO3 from_mock: From MOCK: b0s0g0 rms:A 33.4 29.5 B 29.0 28.9 mn:A -0.5 -0.8 B -0.9 -1.1 gn: 10 10 2010-May-20 20:39:38 INFO3 from_mock: From MOCK: b0s1g0 rms:A 30.0 28.8 B 30.4 32.2 mn:A 0.6 -0.9 B 0.1 0.3 gn: 10 11 2010-May-20 20:39:38 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.1 29.2 B 32.8 29.5 mn:A -0.2 0.4 B 0.1 1.3 gn: 9 10 2010-May-20 20:39:38 INFO3 from_mock: From MOCK: b1s1g0 rms:A 32.0 29.5 B 29.5 29.5 mn:A -0.2 0.2 B -0.7 -0.2 gn: 10 9 2010-May-20 20:39:38 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.3 28.5 B 28.0 29.2 mn:A 0.0 -0.1 B -0.0 -0.1 gn: 12 11 2010-May-20 20:39:38 INFO3 from_mock: From MOCK: b2s1g0 rms:A 31.1 31.4 B 32.2 29.9 mn:A -0.1 -0.5 B -0.2 -0.1 gn: 14 12 2010-May-20 20:39:38 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.8 29.8 B 32.8 29.3 mn:A 0.4 -0.3 B 0.1 -0.3 gn: 11 12 2010-May-20 20:39:38 INFO3 from_mock: From MOCK: b3s1g0 rms:A 31.4 30.6 B 27.9 29.0 mn:A 0.0 -0.3 B -0.5 -0.1 gn: 11 11 2010-May-20 20:39:38 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.4 29.4 B 30.4 30.5 mn:A 0.3 -0.5 B -0.0 0.3 gn: 10 14 2010-May-20 20:39:38 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.7 29.6 B 29.9 28.7 mn:A -0.6 -1.1 B 0.6 -1.0 gn: 12 17 2010-May-20 20:39:38 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.1 28.8 B 31.4 31.3 mn:A 0.1 0.1 B -0.3 -0.4 gn: 10 10 2010-May-20 20:39:38 INFO3 from_mock: From MOCK: b5s1g0 rms:A 30.2 29.4 B 29.7 29.8 mn:A -0.2 -0.5 B 0.2 0.7 gn: 10 9 2010-May-20 20:39:38 INFO3 from_mock: From MOCK: b6s0g0 rms:A 30.5 27.8 B 29.2 29.6 mn:A -0.4 -0.1 B -0.4 0.4 gn: 12 16 2010-May-20 20:39:38 INFO3 from_mock: From MOCK: b6s1g0 rms:A 33.8 30.8 B 29.7 29.1 mn:A -0.5 0.2 B 0.1 -0.4 gn: 14 17 2010-May-20 20:39:38 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2010-May-20 20:39:38 LOG5 end_task: Level: (5) ID = <10151> Status = 0 0 0 0 ok 2010-May-20 20:39:38 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2010-May-20 20:39:38 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2010-May-20 20:39:38 LOG5 finish_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2010-May-20 20:39:38 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2010-May-20 20:39:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 20:39:38 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2010-May-20 20:39:38 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2010-May-20 20:39:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-20 20:39:38 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2010-May-20 20:39:38 LOG5 finish_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2010-May-20 20:39:38 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2010-May-20 20:39:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 20:39:38 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2010-May-20 20:39:38 LOG5 end_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2010-May-20 20:39:38 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-20 20:39:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-20 20:39:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-20 20:39:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-20 20:39:39 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2010-May-20 20:39:39 START begin_task: Starting task 'WAPP+Mock calibration' 2010-May-20 20:39:39 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2010-May-20 20:39:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2010-May-20 20:39:39 START begin_task: Starting task 'selecting calibration type' 2010-May-20 20:39:39 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2010-May-20 20:39:39 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-20 20:39:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-20 20:39:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-20 20:39:39 START begin_task: Starting task 'waiting on setcal' 2010-May-20 20:39:39 LOG5 begin_task: Level: (5) ID = <10154> Status = 0 0 0 0 ok 2010-May-20 20:39:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-20 20:39:39 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-20 20:39:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-20 20:39:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:39:39 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-20 20:39:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-20 20:39:39 LOG5 end_task: Level: (5) ID = <10154> Status = 0 0 0 0 ok 2010-May-20 20:39:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-20 20:39:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-20 20:39:39 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-20 20:39:39 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-20 20:39:39 LOG5 begin_task: Level: (5) ID = <10155> Status = 0 0 0 0 ok 2010-May-20 20:39:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:39:39 NOTE WAPPDATA-new_file: New FITS file: wapp.20100520.a2048.0001.fits 2010-May-20 20:39:39 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100520.a2048.0001.fits} 2010-May-20 20:39:40 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-20 20:39:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-20 20:39:40 LOG5 end_task: Level: (5) ID = <10155> Status = 0 0 0 0 ok 2010-May-20 20:39:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-20 20:39:40 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-20 20:39:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-20 20:39:40 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-20 20:39:40 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-20 20:39:40 LOG5 begin_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2010-May-20 20:39:40 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-20 20:39:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-20 20:39:40 LOG5 end_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2010-May-20 20:39:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-20 20:39:40 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-20 20:39:40 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-20 20:39:40 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2010-May-20 20:39:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-20 20:39:40 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-20 20:39:40 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-20 20:39:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-20 20:39:40 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2010-May-20 20:39:40 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-20 20:39:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-20 20:39:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-20 20:39:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-20 20:39:40 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2010-May-20 20:39:40 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-20 20:39:40 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-May-20 20:39:40 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2010-May-20 20:39:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-20 20:39:40 LOG5 log_alfabeam: Parameters: 12.134305555555555 8.1728055555555574 12.114602 2010.3856560701702 21.399969 2010-May-20 20:39:40 LOG4 log_alfabeam: ALFABEAM 0 12.134305555555578 8.172805555555554 2010-May-20 20:39:40 LOG4 log_alfabeam: ALFABEAM 1 12.133111687079717 8.277659924113635 2010-May-20 20:39:40 LOG4 log_alfabeam: ALFABEAM 2 12.128493989907636 8.208655608812260 2010-May-20 20:39:40 LOG4 log_alfabeam: ALFABEAM 3 12.129646052502643 8.103687288321693 2010-May-20 20:39:40 LOG4 log_alfabeam: ALFABEAM 4 12.135517475934936 8.067979501738391 2010-May-20 20:39:40 LOG4 log_alfabeam: ALFABEAM 5 12.140157247471937 8.137660871960611 2010-May-20 20:39:40 LOG4 log_alfabeam: ALFABEAM 6 12.138903572315563 8.242367679628403 2010-May-20 20:39:40 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-May-20 20:39:40 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-May-20 20:39:40 LOG3 take_mock_data: PSET configuration: obsnm=RT 2010-May-20 20:39:40 LOG3 take_mock_data: PSET configuration: object=AGESVC1A_p2_034 2010-May-20 20:39:40 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-May-20 20:39:40 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-May-20 20:39:40 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-May-20 20:39:40 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-May-20 20:39:40 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-May-20 20:39:40 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-May-20 20:39:40 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2010-May-20 20:39:40 LOG3 take_mock_data: PSET configuration: scantype=ON 2010-May-20 20:39:40 LOG3 take_mock_data: PSET configuration: patternid=14000121 2010-May-20 20:39:40 LOG3 take_mock_data: PSET configuration: scanid=14000135 2010-May-20 20:39:40 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-May-20 20:39:40 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-May-20 20:39:40 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-May-20 20:39:40 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456126940.0 2010-May-20 20:39:40 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306126940.0 2010-May-20 20:39:40 LOG3 take_mock_data: PSET configuration: filetype=1 2010-May-20 20:39:40 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-May-20 20:39:40 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=RT:object=AGESVC1A_p2_034:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=14000121:scanid=14000135:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456126940.0:topobfreqhz=1306126940.0:filetype=1 2010-May-20 20:39:40 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-May-20 20:39:40 LOG5 begin_task: Level: (5) ID = <10159> Status = 0 0 0 0 ok 2010-May-20 20:39:40 LOG4 from_mock: From MOCK: psetok 2010-May-20 20:39:40 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-May-20 20:39:40 LOG5 end_task: Level: (5) ID = <10159> Status = 0 0 0 0 ok 2010-May-20 20:39:40 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-May-20 20:39:40 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-May-20 20:39:40 LOG3 socket_wait: To MOCK: STAR5 2010-May-20 20:39:40 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-May-20 20:39:40 LOG5 begin_task: Level: (5) ID = <10160> Status = 0 0 0 0 ok 2010-May-20 20:39:40 LOG4 from_mock: From MOCK: starok 2010-May-20 20:39:40 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-May-20 20:39:40 LOG5 end_task: Level: (5) ID = <10160> Status = 0 0 0 0 ok 2010-May-20 20:39:40 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-May-20 20:39:40 INFO2 take_data: Starting WAPP+Mock 5-second scan: 14000135 2010-May-20 20:39:41 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-May-20 20:39:41 LOG5 begin_task: Level: (5) ID = <10161> Status = 0 0 0 0 ok 2010-May-20 20:39:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:39:41 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-May-20 20:39:41 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-May-20 20:39:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-20 20:39:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2382.00 2010-May-20 20:39:43 INFO2 got_mock_message: Mock spectrometer start file number is 00000 2010-May-20 20:39:43 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-May-20 20:39:43 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2010-May-20 20:39:43 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2010-May-20 20:39:43 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-May-20 20:39:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-May-20 20:39:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-May-20 20:39:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-May-20 20:39:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-May-20 20:39:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-May-20 20:39:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-May-20 20:39:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-May-20 20:39:43 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-May-20 20:39:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2010-May-20 20:39:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2010-May-20 20:39:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2010-May-20 20:39:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2010-May-20 20:39:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2010-May-20 20:39:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2010-May-20 20:39:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2010-May-20 20:39:46 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 20:39:46.02 2010-May-20 20:39:46 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1274402386.02 Thu May 20 20:39:46 2010 2010-May-20 20:39:46 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-May-20 20:39:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.126940 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:39:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.126940 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:39:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.126940 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:39:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.126940 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:39:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.126940 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:39:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.126940 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:39:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.126940 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:39:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.126940 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:39:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.126940 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:39:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:39:52 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-May-20 20:39:52 INFO1 got_mock_message: From MOCK: DONE with observation 2010-May-20 20:39:52 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-May-20 20:39:52 LOG5 end_task: Level: (5) ID = <10161> Status = 0 0 0 0 ok 2010-May-20 20:39:52 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-May-20 20:39:52 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2010-May-20 20:39:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-20 20:39:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-20 20:39:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-20 20:39:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-20 20:39:52 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2010-May-20 20:39:52 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-20 20:39:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-20 20:39:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-20 20:39:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-20 20:39:52 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2010-May-20 20:39:52 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2010-May-20 20:39:52 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-May-20 20:39:52 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2010-May-20 20:39:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2010-May-20 20:39:52 LOG5 log_alfabeam: Parameters: 12.134305555555555 8.1728055555555574 12.117666 2010.385656418739 21.399969 2010-May-20 20:39:52 LOG4 log_alfabeam: ALFABEAM 0 12.134305555555466 8.172805555555559 2010-May-20 20:39:52 LOG4 log_alfabeam: ALFABEAM 1 12.133141909987632 8.277734777731418 2010-May-20 20:39:52 LOG4 log_alfabeam: ALFABEAM 2 12.128504371206782 8.209024375625587 2010-May-20 20:39:52 LOG4 log_alfabeam: ALFABEAM 3 12.129626182437342 8.103983837833434 2010-May-20 20:39:52 LOG4 log_alfabeam: ALFABEAM 4 12.135487279877795 8.067903505854957 2010-May-20 20:39:52 LOG4 log_alfabeam: ALFABEAM 5 12.140147072502904 8.137289674374166 2010-May-20 20:39:52 LOG4 log_alfabeam: ALFABEAM 6 12.138923563498452 8.242075109041084 2010-May-20 20:39:52 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-May-20 20:39:52 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-May-20 20:39:52 LOG3 take_mock_data: PSET configuration: obsnm=RT 2010-May-20 20:39:52 LOG3 take_mock_data: PSET configuration: object=AGESVC1A_p2_034 2010-May-20 20:39:52 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-May-20 20:39:52 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-May-20 20:39:52 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-May-20 20:39:52 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-May-20 20:39:52 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-May-20 20:39:52 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-May-20 20:39:52 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2010-May-20 20:39:52 LOG3 take_mock_data: PSET configuration: scantype=OFF 2010-May-20 20:39:52 LOG3 take_mock_data: PSET configuration: patternid=14000121 2010-May-20 20:39:52 LOG3 take_mock_data: PSET configuration: scanid=14000136 2010-May-20 20:39:52 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-May-20 20:39:52 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-May-20 20:39:52 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-May-20 20:39:52 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456126940.0 2010-May-20 20:39:52 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306126940.0 2010-May-20 20:39:52 LOG3 take_mock_data: PSET configuration: filetype=1 2010-May-20 20:39:52 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-May-20 20:39:52 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=RT:object=AGESVC1A_p2_034:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=14000121:scanid=14000136:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456126940.0:topobfreqhz=1306126940.0:filetype=1 2010-May-20 20:39:52 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-May-20 20:39:52 LOG5 begin_task: Level: (5) ID = <10164> Status = 0 0 0 0 ok 2010-May-20 20:39:52 LOG4 from_mock: From MOCK: psetok 2010-May-20 20:39:52 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-May-20 20:39:52 LOG5 end_task: Level: (5) ID = <10164> Status = 0 0 0 0 ok 2010-May-20 20:39:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-May-20 20:39:52 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-May-20 20:39:52 LOG3 socket_wait: To MOCK: STAR5 2010-May-20 20:39:52 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-May-20 20:39:52 LOG5 begin_task: Level: (5) ID = <10165> Status = 0 0 0 0 ok 2010-May-20 20:39:52 LOG4 from_mock: From MOCK: starok 2010-May-20 20:39:52 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-May-20 20:39:52 LOG5 end_task: Level: (5) ID = <10165> Status = 0 0 0 0 ok 2010-May-20 20:39:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-May-20 20:39:52 INFO2 take_data: Starting WAPP+Mock 5-second scan: 14000136 2010-May-20 20:39:52 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-May-20 20:39:52 LOG5 begin_task: Level: (5) ID = <10166> Status = 0 0 0 0 ok 2010-May-20 20:39:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:39:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2010-May-20 20:39:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2393.00 2010-May-20 20:39:53 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-May-20 20:39:53 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-May-20 20:39:55 INFO2 got_mock_message: Mock spectrometer start file number is 00100 2010-May-20 20:39:55 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-May-20 20:39:55 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2010-May-20 20:39:55 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2010-May-20 20:39:55 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-May-20 20:39:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-May-20 20:39:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-May-20 20:39:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-May-20 20:39:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-May-20 20:39:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-May-20 20:39:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-May-20 20:39:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-May-20 20:39:55 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-May-20 20:39:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2010-May-20 20:39:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2010-May-20 20:39:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2010-May-20 20:39:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2010-May-20 20:39:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2010-May-20 20:39:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2010-May-20 20:39:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2010-May-20 20:39:58 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 20:39:58.01 2010-May-20 20:39:58 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1274402398.01 Thu May 20 20:39:58 2010 2010-May-20 20:39:58 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-May-20 20:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.126940 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.126940 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.126940 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.126940 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.126940 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.126940 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.126940 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.126940 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.126940 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:39:58 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2010-May-20 20:39:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 20:40:04 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-May-20 20:40:04 INFO1 got_mock_message: From MOCK: DONE with observation 2010-May-20 20:40:04 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-May-20 20:40:04 LOG5 end_task: Level: (5) ID = <10166> Status = 0 0 0 0 ok 2010-May-20 20:40:04 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-May-20 20:40:04 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2010-May-20 20:40:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-20 20:40:04 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2010-May-20 20:40:04 LOG5 finish_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2010-May-20 20:40:04 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2010-May-20 20:40:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 20:40:04 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2010-May-20 20:40:04 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2010-May-20 20:40:04 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2010-May-20 20:40:04 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 357.22 and ZA = 10.25 2010-May-20 20:40:04 LOG3 track_source: Calling 'track_source AGESVC1A_p2_034 357.22 10.2502749675 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-20 20:40:04 START begin_task: Starting task 'sending tracking commands' 2010-May-20 20:40:04 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2010-May-20 20:40:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_034} INFO {Slewing to source 'AGESVC1A_p2_034' ...} 2010-May-20 20:40:04 INFO1 track_source: Starting to track AGESVC1A_p2_034 2010-May-20 20:40:04 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_034" 2010-May-20 20:40:04 LOG3 vw_send: To DATATAKING: set ra 357.22 2010-May-20 20:40:04 LOG3 vw_send: To DATATAKING: set dec 10.2502749675 2010-May-20 20:40:04 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-20 20:40:04 LOG3 vw_send: To DATATAKING: pnt tr 357.22 10.2502749675 -CF 2010-May-20 20:40:04 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-20 20:40:04 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-20 20:40:04 LOG5 finish_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2010-May-20 20:40:04 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-20 20:40:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 20:40:04 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-20 20:40:04 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2010-May-20 20:40:04 LOG1 fixed_driftmap: Parameters: HA = -00:01:59.9 Start = 12:07:33.6 LST = 12:07:15.6 diff = 18.0 secs 2010-May-20 20:40:04 INFO2 fixed_driftmap: Waiting 16 seconds for RA 12:09:34 2010-May-20 20:40:04 INFO2 lstwait: Waiting for 15.9 secs from LST 12:07:16 to LST 12:07:32 ... 2010-May-20 20:40:04 LOG4 send_obs_status: To obs_status: <1> TASKTIME 15.948929337189565 BITMAP stat_wait MESSAGE {Waiting ...} 2010-May-20 20:40:04 START begin_task: Starting task 'waiting on wait on LST' 2010-May-20 20:40:04 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2010-May-20 20:40:04 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_034" 2010-May-20 20:40:04 LOG4 got_cormsg: From DATATAKING: set ra 357.22 2010-May-20 20:40:04 LOG4 got_cormsg: From DATATAKING: set dec 10.2502749675 2010-May-20 20:40:04 LOG4 got_cormsg: From DATATAKING: vw% 357.22 2010-May-20 20:40:04 LOG4 got_cormsg: From DATATAKING: vw% 10.2502749675 2010-May-20 20:40:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:40:04 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-20 20:40:04 LOG4 got_cormsg: From DATATAKING: pnt tr 357.22 10.2502749675 -CF 2010-May-20 20:40:04 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-20 20:40:04 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-20 20:40:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 20:40:20 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-May-20 20:40:20 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2010-May-20 20:40:20 LOG4 lstwait: Finished waiting 1.05 seconds late 2010-May-20 20:40:20 INFO3 lstwait: Finished waiting 2010-May-20 20:40:20 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-May-20 20:40:20 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2010-May-20 20:40:20 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-May-20 20:40:20 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2010-May-20 20:40:20 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-20 20:40:20 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-May-20 20:40:20 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2010-May-20 20:40:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-20 20:40:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-20 20:40:20 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-May-20 20:40:20 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-May-20 20:40:20 LOG3 take_mock_data: PSET configuration: obsnm=RT 2010-May-20 20:40:20 LOG3 take_mock_data: PSET configuration: object=AGESVC1A_p2_034 2010-May-20 20:40:20 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-May-20 20:40:20 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-May-20 20:40:20 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-May-20 20:40:20 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-May-20 20:40:20 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-May-20 20:40:20 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-May-20 20:40:20 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2010-May-20 20:40:20 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2010-May-20 20:40:20 LOG3 take_mock_data: PSET configuration: patternid=14000137 2010-May-20 20:40:20 LOG3 take_mock_data: PSET configuration: scanid=14000137 2010-May-20 20:40:20 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-May-20 20:40:20 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-May-20 20:40:20 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-May-20 20:40:20 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456126940.0 2010-May-20 20:40:20 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306126940.0 2010-May-20 20:40:20 LOG3 take_mock_data: PSET configuration: filetype=1 2010-May-20 20:40:20 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-May-20 20:40:20 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=RT:object=AGESVC1A_p2_034:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=14000137:scanid=14000137:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456126940.0:topobfreqhz=1306126940.0:filetype=1 2010-May-20 20:40:20 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-May-20 20:40:20 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2010-May-20 20:40:20 LOG4 from_mock: From MOCK: psetok 2010-May-20 20:40:20 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-May-20 20:40:20 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2010-May-20 20:40:20 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-May-20 20:40:20 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-May-20 20:40:20 LOG3 socket_wait: To MOCK: STAR1200 2010-May-20 20:40:20 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-May-20 20:40:20 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2010-May-20 20:40:20 LOG4 from_mock: From MOCK: starok 2010-May-20 20:40:20 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-May-20 20:40:20 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2010-May-20 20:40:20 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-May-20 20:40:20 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 14000137 2010-May-20 20:40:21 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-May-20 20:40:21 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2010-May-20 20:40:21 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-May-20 20:40:21 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-May-20 20:40:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 20:40:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-20 20:40:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2422.00 2010-May-20 20:40:22 INFO2 got_mock_message: Mock spectrometer start file number is 00200 2010-May-20 20:40:22 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-May-20 20:40:22 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2010-May-20 20:40:22 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2010-May-20 20:40:22 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-May-20 20:40:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-May-20 20:40:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-May-20 20:40:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-May-20 20:40:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-May-20 20:40:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-May-20 20:40:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-May-20 20:40:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-May-20 20:40:22 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-May-20 20:40:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.16 GB 2010-May-20 20:40:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.16 GB 2010-May-20 20:40:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.16 GB 2010-May-20 20:40:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.16 GB 2010-May-20 20:40:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.16 GB 2010-May-20 20:40:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.16 GB 2010-May-20 20:40:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.16 GB 2010-May-20 20:40:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.126940 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 20:40:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.126940 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 20:40:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.126940 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 20:40:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.126940 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 20:40:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.126940 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 20:40:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.126940 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 20:40:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.126940 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 20:40:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.126940 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 20:40:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.126940 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 20:40:25 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 20:40:25.01 2010-May-20 20:40:25 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1274402425.01 Thu May 20 20:40:25 2010 2010-May-20 20:40:25 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-May-20 20:53:02 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 20:53:02.298 (seconds: 75182.298)!} 2010-May-20 20:53:02 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 20:53:02.298 (seconds: 75182.298)! 2010-May-20 20:53:03 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 75181.0 to 75182.0! 2010-May-20 20:53:04 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (75181.0 - 75183.0)! 2010-May-20 21:00:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 21:00:26 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-May-20 21:00:26 INFO1 got_mock_message: From MOCK: DONE with observation 2010-May-20 21:00:26 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-May-20 21:00:26 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2010-May-20 21:00:26 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-May-20 21:00:26 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2010-May-20 21:00:26 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-May-20 21:00:26 LOG5 finish_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2010-May-20 21:00:26 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2010-May-20 21:00:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-20 21:00:26 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2010-May-20 21:00:26 LOG5 end_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2010-May-20 21:00:26 COMMAND run_command_line: EXECUTING command 43: 'ENDIF' 2010-May-20 21:00:26 COMMAND run_command_line: EXECUTING command 46: 'IF LSTSLEW(AGESVC1A_p2_036) < 123033 THEN' 2010-May-20 21:00:26 LOG3 is_if_valid: Current source data: up 383.8 11.2 UP - - 51 1.1 2010-May-20 21:00:26 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1A_p2_036) < 123033 2010-May-20 21:00:26 INFO5 is_if_valid: Condition parsed as: 12.479715333333333 < 12.509166666666667 2010-May-20 21:00:26 COMMAND run_command_line: EXECUTING command 47: 'FIXEDDRIFT az=27.07 alfaangle=-3.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p2_036 ra=120900.00 dec=80730.00' 2010-May-20 21:00:26 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-May-20 21:00:27 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-20 21:00:27 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 27.07 -3.5 hcorcal 5 tracking no off lcorcal first 1 AGESVC1A_p2_036 120900.00 80730.00 J 8500.0 Heliocentric velocity(optical)' 2010-May-20 21:00:27 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-May-20 21:00:27 LOG5 begin_task: Level: (2) ID = <10173> Status = 0 0 0 0 ok 2010-May-20 21:00:27 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGESVC1A_p2_034' 2010-May-20 21:00:27 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-May-20 21:00:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p2_036} 2010-May-20 21:00:27 INFO3 fixed_driftmap: Sending telescope to Az = 27.07 and ZA = 11.49 2010-May-20 21:00:27 LOG3 track_source: Calling 'track_source AGESVC1A_p2_036 27.07 11.4851395320 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-20 21:00:27 START begin_task: Starting task 'sending tracking commands' 2010-May-20 21:00:27 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2010-May-20 21:00:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_036} INFO {Slewing to source 'AGESVC1A_p2_036' ...} 2010-May-20 21:00:27 INFO1 track_source: Starting to track AGESVC1A_p2_036 2010-May-20 21:00:27 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_036" 2010-May-20 21:00:27 LOG3 vw_send: To DATATAKING: set ra 27.07 2010-May-20 21:00:27 LOG3 vw_send: To DATATAKING: set dec 11.4851395320 2010-May-20 21:00:27 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-20 21:00:27 LOG3 vw_send: To DATATAKING: pnt tr 27.07 11.4851395320 -CF 2010-May-20 21:00:27 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-20 21:00:27 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-20 21:00:27 LOG5 finish_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2010-May-20 21:00:27 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-20 21:00:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 21:00:27 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-20 21:00:27 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2010-May-20 21:00:27 START begin_task: Starting task 'rotate ALFA to -3.5 degrees' 2010-May-20 21:00:27 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2010-May-20 21:00:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -3.5 degrees ...} 2010-May-20 21:00:27 INFO2 rotate_alfa: ALFA commanded to -3.5 degrees 2010-May-20 21:00:27 LOG3 sock_errsend: To ALFAMOTOR: POSITION -3.5 REPLY 2010-May-20 21:00:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-May-20 21:00:27 START begin_task: Starting task 'waiting on ALFA rotation' 2010-May-20 21:00:27 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2010-May-20 21:00:27 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_036" 2010-May-20 21:00:27 LOG4 got_cormsg: From DATATAKING: set ra 27.07 2010-May-20 21:00:27 LOG4 got_cormsg: From DATATAKING: set dec 11.4851395320 2010-May-20 21:00:27 LOG4 got_cormsg: From DATATAKING: vw% 27.07 2010-May-20 21:00:27 LOG4 got_cormsg: From DATATAKING: vw% 11.4851395320 2010-May-20 21:00:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:00:27 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-20 21:00:27 LOG4 got_cormsg: From DATATAKING: pnt tr 27.07 11.4851395320 -CF 2010-May-20 21:00:27 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-20 21:00:27 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-20 21:00:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:00:43 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-May-20 21:00:43 INFO3 alfa_motor: ALFA rotator in-position -3.50 degrees 2010-May-20 21:00:43 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-May-20 21:00:43 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2010-May-20 21:00:43 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-20 21:00:43 STOP finish_task: Finishing task 'rotate ALFA to -3.5 degrees' 2010-May-20 21:00:43 LOG5 finish_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2010-May-20 21:00:43 INFO2 finish_task: DONE finished configuration: rotating ALFA to -3.5 degrees 2010-May-20 21:00:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 21:00:43 STOP end_task: Finishing task 'rotate ALFA to -3.5 degrees' with status 'OK' 2010-May-20 21:00:43 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2010-May-20 21:00:43 START begin_task: Starting task 'waiting on telescope' 2010-May-20 21:00:43 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2010-May-20 21:00:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-20 21:00:43 LOG3 waittrk: Start waittrk 5 2010-May-20 21:00:43 START begin_task: Starting task 'waiting on telescope movement' 2010-May-20 21:00:43 LOG5 begin_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2010-May-20 21:00:48 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-20 21:00:48 LOG5 end_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2010-May-20 21:00:48 START begin_task: Starting task 'waiting on telescope on source' 2010-May-20 21:00:48 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2010-May-20 21:01:55 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-20 21:01:55 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2010-May-20 21:01:55 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-20 21:01:55 INFO2 waittrk: Now tracking AGESVC1A_p2_036 2010-May-20 21:01:55 LOG4 waittrk: Current telescope position: Az = 386.79 ZA = 11.46 2010-May-20 21:01:55 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-20 21:01:55 LOG5 finish_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2010-May-20 21:01:55 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-20 21:01:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 21:01:55 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-20 21:01:55 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2010-May-20 21:01:55 START begin_task: Starting task 'selecting calibration type' 2010-May-20 21:01:55 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2010-May-20 21:01:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-20 21:01:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-20 21:01:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-20 21:01:55 START begin_task: Starting task 'waiting on setcal' 2010-May-20 21:01:55 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2010-May-20 21:01:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-20 21:01:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-20 21:01:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:01:56 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-20 21:01:56 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-20 21:01:56 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2010-May-20 21:01:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-20 21:01:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-20 21:01:56 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-20 21:01:56 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-20 21:01:56 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2010-May-20 21:01:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:01:56 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-20 21:01:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-20 21:01:56 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2010-May-20 21:01:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-20 21:01:56 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-20 21:01:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-20 21:01:56 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-20 21:01:56 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-20 21:01:56 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2010-May-20 21:01:56 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-20 21:01:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-20 21:01:56 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2010-May-20 21:01:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-20 21:01:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-20 21:01:56 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-20 21:01:56 LOG5 end_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2010-May-20 21:01:56 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2010-May-20 21:01:56 INFO2 astwait: Waiting for 21 seconds from 01:01:56 to 01:02:17 UTC ... 2010-May-20 21:01:56 LOG4 send_obs_status: To obs_status: <1> TASKTIME 21 BITMAP stat_wait MESSAGE {Waiting ...} 2010-May-20 21:01:56 START begin_task: Starting task 'waiting on waiting for AST time' 2010-May-20 21:01:56 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-May-20 21:02:17 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2010-May-20 21:02:17 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-May-20 21:02:17 INFO3 astwait: Finished waiting 2010-May-20 21:02:17 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-May-20 21:02:17 LOG5 dopset_later: Calling 'dopset_later 61.280261194532535' 2010-May-20 21:02:17 INFO3 dopset_later: Setting Doppler correction for 21:03:17 (61.3 seconds from now) 2010-May-20 21:02:17 LOG5 antvel: Calling 'antvel 27.070000 11.485140 F Heliocentric 61.280261194532535' 2010-May-20 21:02:17 LOG2 antvel: Transforming current Az = 27.07 ZA = 11.49 to apparent RA = 12:09:33.3 Dec = +08:03:54.1 2010-May-20 21:02:17 LOG2 antvel: Parameters to Doppler: Heliocentric 90197 2010 140 0.0 2010-May-20 21:02:17 INFO5 antvel: Computed antenna velocity: +25.33080 km/s 2010-May-20 21:02:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=25.330802754099999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-May-20 21:02:17 INFO4 dopset_gen: New sky frequencies: 1381.126731 1381.126731 1381.126731 1381.126731 1381.126731 1381.126731 1381.126731 1381.126731 1381.126731 2010-May-20 21:02:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.126731 sky0=1381.126731 sky1=1381.126731 sky2=1381.126731 sky3=1381.126731 sky4=1381.126731 sky5=1381.126731 sky6=1381.126731 sky7=1381.126731 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 21:02:17 LOG2 dopset_gen: Result from 'sky2syn': 1631.126731 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 21:02:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631126731.0} 2010-May-20 21:02:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 21:02:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2010-May-20 21:02:17 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2010-May-20 21:02:17 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.2 Dec = +08:07:22.1 2010-May-20 21:02:17 LOG3 track_source: Calling 'track_source AGESVC1A_p2_036 120803.2 080722.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-20 21:02:17 START begin_task: Starting task 'sending tracking commands' 2010-May-20 21:02:17 LOG5 begin_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2010-May-20 21:02:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_036} INFO {Slewing to source 'AGESVC1A_p2_036' ...} 2010-May-20 21:02:17 INFO1 track_source: Starting to track AGESVC1A_p2_036 2010-May-20 21:02:17 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_036" 2010-May-20 21:02:17 LOG3 vw_send: To DATATAKING: set ra 120803.2 2010-May-20 21:02:17 LOG3 vw_send: To DATATAKING: set dec 080722.1 2010-May-20 21:02:17 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-20 21:02:17 LOG3 vw_send: To DATATAKING: pnt tr 120803.2 080722.1 -CJ 2010-May-20 21:02:17 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-20 21:02:17 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-20 21:02:17 LOG5 finish_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2010-May-20 21:02:17 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-20 21:02:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 21:02:17 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-20 21:02:17 LOG5 end_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2010-May-20 21:02:17 START begin_task: Starting task 'waiting on telescope' 2010-May-20 21:02:17 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2010-May-20 21:02:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-20 21:02:17 LOG3 waittrk: Start waittrk 5 2010-May-20 21:02:17 START begin_task: Starting task 'waiting on telescope movement' 2010-May-20 21:02:17 LOG5 begin_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2010-May-20 21:02:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631126731.0} 2010-May-20 21:02:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 21:02:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:02:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_036" 2010-May-20 21:02:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-20 21:02:17 LOG4 got_cormsg: From DATATAKING: set ra 120803.2 2010-May-20 21:02:17 LOG4 got_cormsg: From DATATAKING: set dec 080722.1 2010-May-20 21:02:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-20 21:02:17 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.2 080722.1 -CJ 2010-May-20 21:02:17 LOG4 got_cormsg: From DATATAKING: 120803.2 2010-May-20 21:02:17 LOG4 got_cormsg: From DATATAKING: vw% 080722.1 2010-May-20 21:02:17 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2010-May-20 21:02:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-20 21:02:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:02:22 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-20 21:02:22 LOG5 end_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2010-May-20 21:02:22 START begin_task: Starting task 'waiting on telescope on source' 2010-May-20 21:02:22 LOG5 begin_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2010-May-20 21:02:24 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-20 21:02:24 LOG5 end_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2010-May-20 21:02:24 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-20 21:02:24 INFO2 waittrk: Now tracking AGESVC1A_p2_036 2010-May-20 21:02:24 LOG4 waittrk: Current telescope position: Az = 386.87 ZA = 11.47 2010-May-20 21:02:24 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-20 21:02:24 LOG5 finish_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2010-May-20 21:02:24 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-20 21:02:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 21:02:24 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-20 21:02:24 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2010-May-20 21:02:24 START begin_task: Starting task 'adjusting WAPP+Mock power' 2010-May-20 21:02:24 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2010-May-20 21:02:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2010-May-20 21:02:24 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2010-May-20 21:02:24 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-May-20 21:02:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-May-20 21:02:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-20 21:02:24 START begin_task: Starting task 'waiting on adjpwrif2' 2010-May-20 21:02:24 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2010-May-20 21:02:25 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-May-20 21:02:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-20 21:02:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:02:27 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-20 21:02:27 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-May-20 21:02:27 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2010-May-20 21:02:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-May-20 21:02:27 START begin_task: Starting task 'adjusting WAPP power' 2010-May-20 21:02:27 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2010-May-20 21:02:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-20 21:02:28 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-May-20 21:02:28 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-May-20 21:02:28 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-May-20 21:02:28 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-May-20 21:02:28 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-May-20 21:02:28 LOG5 begin_task: Level: (5) ID = <10192> Status = 0 0 0 0 ok 2010-May-20 21:02:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-May-20 21:02:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:02:28 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-May-20 21:02:28 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 4 3 dB 2010-May-20 21:02:28 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 5 dB 2010-May-20 21:02:28 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-May-20 21:02:28 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-May-20 21:02:28 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-May-20 21:02:28 LOG5 end_task: Level: (5) ID = <10192> Status = 0 0 0 0 ok 2010-May-20 21:02:28 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.985 0.967 ALFA beam 1: 1.043 1.049 2010-May-20 21:02:28 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.983 0.951 ALFA beam 3: 0.927 1.013 2010-May-20 21:02:28 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.936 0.920 ALFA beam 5: 0.993 1.046 2010-May-20 21:02:28 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.969 0.915 ALFA beam 7: 1.055 1.065 2010-May-20 21:02:28 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-20 21:02:28 LOG5 finish_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2010-May-20 21:02:28 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-May-20 21:02:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 21:02:28 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-20 21:02:28 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2010-May-20 21:02:28 START begin_task: Starting task 'adjusting Mock spectrometer power' 2010-May-20 21:02:28 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2010-May-20 21:02:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-20 21:02:28 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2010-May-20 21:02:28 LOG3 socket_wait: To MOCK: ADJP30 2010-May-20 21:02:28 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2010-May-20 21:02:28 LOG5 begin_task: Level: (5) ID = <10194> Status = 0 0 0 0 ok 2010-May-20 21:02:34 INFO3 from_mock: From MOCK: b0s0g0 rms:A 30.1 26.6 B 29.1 29.0 mn:A -0.5 -0.7 B -0.9 -1.0 gn: 9 10 2010-May-20 21:02:34 INFO3 from_mock: From MOCK: b0s1g0 rms:A 19.7 18.8 B 21.6 22.8 mn:A 0.8 -0.8 B 0.6 0.3 gn: 6 8 2010-May-20 21:02:34 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.3 29.4 B 32.6 29.4 mn:A -0.0 0.5 B 0.0 1.5 gn: 9 10 2010-May-20 21:02:34 INFO3 from_mock: From MOCK: b1s1g0 rms:A 23.6 21.7 B 29.4 29.4 mn:A 0.1 0.4 B -0.5 -0.0 gn: 7 9 2010-May-20 21:02:34 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.4 28.5 B 28.0 29.1 mn:A 0.1 -0.1 B 0.1 0.1 gn: 12 11 2010-May-20 21:02:34 INFO3 from_mock: From MOCK: b2s1g0 rms:A 24.5 24.8 B 22.8 21.1 mn:A -0.1 -0.5 B 0.0 0.1 gn: 12 9 2010-May-20 21:02:34 INFO3 from_mock: From MOCK: b3s0g0 rms:A 30.2 30.1 B 32.9 29.4 mn:A 0.4 -0.2 B 0.1 -0.3 gn: 11 12 2010-May-20 21:02:34 INFO3 from_mock: From MOCK: b3s1g0 rms:A 22.3 21.7 B 24.8 25.8 mn:A 0.2 -0.2 B -0.3 0.2 gn: 8 10 2010-May-20 21:02:34 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.5 29.6 B 30.3 30.5 mn:A 0.4 -0.4 B -0.0 0.4 gn: 10 14 2010-May-20 21:02:34 INFO3 from_mock: From MOCK: b4s1g0 rms:A 22.9 20.6 B 24.2 23.3 mn:A -0.4 -0.8 B 0.6 -0.7 gn: 9 15 2010-May-20 21:02:34 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.5 29.1 B 31.5 31.4 mn:A 0.3 0.1 B -0.3 -0.3 gn: 10 10 2010-May-20 21:02:34 INFO3 from_mock: From MOCK: b5s1g0 rms:A 19.5 19.1 B 24.4 24.5 mn:A 0.0 -0.0 B 0.3 1.0 gn: 6 7 2010-May-20 21:02:34 INFO3 from_mock: From MOCK: b6s0g0 rms:A 31.1 28.4 B 29.5 29.9 mn:A -0.4 0.1 B -0.3 0.5 gn: 12 16 2010-May-20 21:02:34 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.3 27.7 B 29.4 28.8 mn:A -0.4 0.2 B 0.3 -0.3 gn: 13 17 2010-May-20 21:02:34 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2010-May-20 21:02:34 LOG5 end_task: Level: (5) ID = <10194> Status = 0 0 0 0 ok 2010-May-20 21:02:34 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2010-May-20 21:02:34 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2010-May-20 21:02:34 LOG5 finish_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2010-May-20 21:02:34 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2010-May-20 21:02:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 21:02:34 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2010-May-20 21:02:34 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2010-May-20 21:02:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-20 21:02:34 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2010-May-20 21:02:34 LOG5 finish_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2010-May-20 21:02:34 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2010-May-20 21:02:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 21:02:34 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2010-May-20 21:02:34 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2010-May-20 21:02:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-20 21:02:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-20 21:02:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-20 21:02:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-20 21:02:34 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2010-May-20 21:02:34 START begin_task: Starting task 'WAPP+Mock calibration' 2010-May-20 21:02:34 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-May-20 21:02:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2010-May-20 21:02:34 START begin_task: Starting task 'selecting calibration type' 2010-May-20 21:02:34 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2010-May-20 21:02:34 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-20 21:02:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-20 21:02:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-20 21:02:34 START begin_task: Starting task 'waiting on setcal' 2010-May-20 21:02:34 LOG5 begin_task: Level: (5) ID = <10197> Status = 0 0 0 0 ok 2010-May-20 21:02:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-20 21:02:34 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-20 21:02:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-20 21:02:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:02:35 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-20 21:02:35 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-20 21:02:35 LOG5 end_task: Level: (5) ID = <10197> Status = 0 0 0 0 ok 2010-May-20 21:02:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-20 21:02:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-20 21:02:35 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-20 21:02:35 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-20 21:02:35 LOG5 begin_task: Level: (5) ID = <10198> Status = 0 0 0 0 ok 2010-May-20 21:02:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:02:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20100520.a2048.0002.fits 2010-May-20 21:02:35 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100520.a2048.0002.fits} 2010-May-20 21:02:35 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-20 21:02:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-20 21:02:35 LOG5 end_task: Level: (5) ID = <10198> Status = 0 0 0 0 ok 2010-May-20 21:02:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-20 21:02:35 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-20 21:02:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-20 21:02:35 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-20 21:02:35 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-20 21:02:35 LOG5 begin_task: Level: (5) ID = <10199> Status = 0 0 0 0 ok 2010-May-20 21:02:35 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-20 21:02:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-20 21:02:35 LOG5 end_task: Level: (5) ID = <10199> Status = 0 0 0 0 ok 2010-May-20 21:02:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-20 21:02:35 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-20 21:02:35 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-20 21:02:35 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2010-May-20 21:02:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-20 21:02:35 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-20 21:02:35 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-20 21:02:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-20 21:02:35 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2010-May-20 21:02:35 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-20 21:02:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-20 21:02:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-20 21:02:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-20 21:02:35 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2010-May-20 21:02:35 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-20 21:02:35 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-May-20 21:02:35 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2010-May-20 21:02:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-20 21:02:35 LOG5 log_alfabeam: Parameters: 12.13422222222222 8.1228055555555585 12.497592 2010.385699641291 -3.500039 2010-May-20 21:02:35 LOG4 log_alfabeam: ALFABEAM 0 12.134222222222219 8.122805555555564 2010-May-20 21:02:35 LOG4 log_alfabeam: ALFABEAM 1 12.133838801900742 8.224812028840349 2010-May-20 21:02:35 LOG4 log_alfabeam: ALFABEAM 2 12.128520909210701 8.157502215380642 2010-May-20 21:02:35 LOG4 log_alfabeam: ALFABEAM 3 12.128906488665809 8.055293661969634 2010-May-20 21:02:35 LOG4 log_alfabeam: ALFABEAM 4 12.134658388738732 8.020655848067126 2010-May-20 21:02:35 LOG4 log_alfabeam: ALFABEAM 5 12.139937569660207 8.088776028580869 2010-May-20 21:02:35 LOG4 log_alfabeam: ALFABEAM 6 12.139503644482009 8.190723977651599 2010-May-20 21:02:35 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-May-20 21:02:35 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-May-20 21:02:35 LOG3 take_mock_data: PSET configuration: obsnm=RT 2010-May-20 21:02:35 LOG3 take_mock_data: PSET configuration: object=AGESVC1A_p2_036 2010-May-20 21:02:35 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-May-20 21:02:35 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-May-20 21:02:35 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-May-20 21:02:35 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-May-20 21:02:35 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-May-20 21:02:35 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-May-20 21:02:36 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2010-May-20 21:02:36 LOG3 take_mock_data: PSET configuration: scantype=ON 2010-May-20 21:02:36 LOG3 take_mock_data: PSET configuration: patternid=14000137 2010-May-20 21:02:36 LOG3 take_mock_data: PSET configuration: scanid=14000138 2010-May-20 21:02:36 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-May-20 21:02:36 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-May-20 21:02:36 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-May-20 21:02:36 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456126731.0 2010-May-20 21:02:36 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306126731.0 2010-May-20 21:02:36 LOG3 take_mock_data: PSET configuration: filetype=1 2010-May-20 21:02:36 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-May-20 21:02:36 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=RT:object=AGESVC1A_p2_036:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=14000137:scanid=14000138:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456126731.0:topobfreqhz=1306126731.0:filetype=1 2010-May-20 21:02:36 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-May-20 21:02:36 LOG5 begin_task: Level: (5) ID = <10202> Status = 0 0 0 0 ok 2010-May-20 21:02:36 LOG4 from_mock: From MOCK: psetok 2010-May-20 21:02:36 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-May-20 21:02:36 LOG5 end_task: Level: (5) ID = <10202> Status = 0 0 0 0 ok 2010-May-20 21:02:36 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-May-20 21:02:36 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-May-20 21:02:36 LOG3 socket_wait: To MOCK: STAR5 2010-May-20 21:02:36 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-May-20 21:02:36 LOG5 begin_task: Level: (5) ID = <10203> Status = 0 0 0 0 ok 2010-May-20 21:02:36 LOG4 from_mock: From MOCK: starok 2010-May-20 21:02:36 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-May-20 21:02:36 LOG5 end_task: Level: (5) ID = <10203> Status = 0 0 0 0 ok 2010-May-20 21:02:36 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-May-20 21:02:36 INFO2 take_data: Starting WAPP+Mock 5-second scan: 14000138 2010-May-20 21:02:36 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-May-20 21:02:36 LOG5 begin_task: Level: (5) ID = <10204> Status = 0 0 0 0 ok 2010-May-20 21:02:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 21:02:36 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-May-20 21:02:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-20 21:02:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3757.00 2010-May-20 21:02:36 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-May-20 21:02:38 INFO2 got_mock_message: Mock spectrometer start file number is 00300 2010-May-20 21:02:38 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-May-20 21:02:38 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2010-May-20 21:02:38 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2010-May-20 21:02:38 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-May-20 21:02:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-May-20 21:02:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-May-20 21:02:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-May-20 21:02:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-May-20 21:02:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-May-20 21:02:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-May-20 21:02:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-May-20 21:02:38 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-May-20 21:02:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2010-May-20 21:02:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2010-May-20 21:02:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2010-May-20 21:02:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2010-May-20 21:02:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2010-May-20 21:02:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2010-May-20 21:02:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2010-May-20 21:02:41 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 21:02:41.01 2010-May-20 21:02:41 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1274403761.01 Thu May 20 21:02:41 2010 2010-May-20 21:02:41 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-May-20 21:02:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.126731 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 21:02:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.126731 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 21:02:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.126731 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 21:02:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.126731 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 21:02:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.126731 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 21:02:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.126731 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 21:02:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.126731 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 21:02:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.126731 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 21:02:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.126731 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 21:02:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 21:02:47 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-May-20 21:02:47 INFO1 got_mock_message: From MOCK: DONE with observation 2010-May-20 21:02:47 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-May-20 21:02:47 LOG5 end_task: Level: (5) ID = <10204> Status = 0 0 0 0 ok 2010-May-20 21:02:47 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-May-20 21:02:47 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2010-May-20 21:02:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-20 21:02:47 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-20 21:02:47 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-20 21:02:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-20 21:02:47 LOG5 begin_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2010-May-20 21:02:47 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-20 21:02:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-20 21:02:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-20 21:02:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-20 21:02:47 LOG5 end_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2010-May-20 21:02:47 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2010-May-20 21:02:47 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-May-20 21:02:47 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2010-May-20 21:02:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2010-May-20 21:02:47 LOG5 log_alfabeam: Parameters: 12.13422222222222 8.1228055555555585 12.500656 2010.3856999898599 -3.500039 2010-May-20 21:02:47 LOG4 log_alfabeam: ALFABEAM 0 12.134222222222226 8.122805555555557 2010-May-20 21:02:47 LOG4 log_alfabeam: ALFABEAM 1 12.133861989240652 8.224830830370879 2010-May-20 21:02:47 LOG4 log_alfabeam: ALFABEAM 2 12.128528826984764 8.157787662392106 2010-May-20 21:02:47 LOG4 log_alfabeam: ALFABEAM 3 12.128891179761329 8.055560564632989 2010-May-20 21:02:47 LOG4 log_alfabeam: ALFABEAM 4 12.134635085424771 8.020634660063036 2010-May-20 21:02:47 LOG4 log_alfabeam: ALFABEAM 5 12.139929773803471 8.088488646621929 2010-May-20 21:02:47 LOG4 log_alfabeam: ALFABEAM 6 12.139519112342290 8.190458035774711 2010-May-20 21:02:47 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-May-20 21:02:47 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-May-20 21:02:47 LOG3 take_mock_data: PSET configuration: obsnm=RT 2010-May-20 21:02:47 LOG3 take_mock_data: PSET configuration: object=AGESVC1A_p2_036 2010-May-20 21:02:47 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-May-20 21:02:47 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-May-20 21:02:47 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-May-20 21:02:47 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-May-20 21:02:47 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-May-20 21:02:47 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-May-20 21:02:47 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2010-May-20 21:02:47 LOG3 take_mock_data: PSET configuration: scantype=OFF 2010-May-20 21:02:47 LOG3 take_mock_data: PSET configuration: patternid=14000137 2010-May-20 21:02:47 LOG3 take_mock_data: PSET configuration: scanid=14000139 2010-May-20 21:02:47 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-May-20 21:02:47 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-May-20 21:02:47 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-May-20 21:02:47 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456126731.0 2010-May-20 21:02:47 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306126731.0 2010-May-20 21:02:47 LOG3 take_mock_data: PSET configuration: filetype=1 2010-May-20 21:02:47 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-May-20 21:02:47 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=RT:object=AGESVC1A_p2_036:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=14000137:scanid=14000139:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456126731.0:topobfreqhz=1306126731.0:filetype=1 2010-May-20 21:02:47 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-May-20 21:02:47 LOG5 begin_task: Level: (5) ID = <10207> Status = 0 0 0 0 ok 2010-May-20 21:02:47 LOG4 from_mock: From MOCK: psetok 2010-May-20 21:02:47 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-May-20 21:02:47 LOG5 end_task: Level: (5) ID = <10207> Status = 0 0 0 0 ok 2010-May-20 21:02:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-May-20 21:02:47 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-May-20 21:02:47 LOG3 socket_wait: To MOCK: STAR5 2010-May-20 21:02:47 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-May-20 21:02:47 LOG5 begin_task: Level: (5) ID = <10208> Status = 0 0 0 0 ok 2010-May-20 21:02:47 LOG4 from_mock: From MOCK: starok 2010-May-20 21:02:47 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-May-20 21:02:47 LOG5 end_task: Level: (5) ID = <10208> Status = 0 0 0 0 ok 2010-May-20 21:02:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-May-20 21:02:47 INFO2 take_data: Starting WAPP+Mock 5-second scan: 14000139 2010-May-20 21:02:47 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-May-20 21:02:47 LOG5 begin_task: Level: (5) ID = <10209> Status = 0 0 0 0 ok 2010-May-20 21:02:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 21:02:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2010-May-20 21:02:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3768.00 2010-May-20 21:02:48 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-May-20 21:02:48 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-May-20 21:02:49 INFO2 got_mock_message: Mock spectrometer start file number is 00400 2010-May-20 21:02:49 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-May-20 21:02:49 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2010-May-20 21:02:49 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2010-May-20 21:02:49 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-May-20 21:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-May-20 21:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-May-20 21:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-May-20 21:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-May-20 21:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-May-20 21:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-May-20 21:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-May-20 21:02:49 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-May-20 21:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2010-May-20 21:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2010-May-20 21:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2010-May-20 21:02:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2010-May-20 21:02:50 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2010-May-20 21:02:50 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2010-May-20 21:02:50 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2010-May-20 21:02:52 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 21:02:52.01 2010-May-20 21:02:52 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1274403772.01 Thu May 20 21:02:52 2010 2010-May-20 21:02:52 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-May-20 21:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.126731 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 21:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.126731 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 21:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.126731 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 21:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.126731 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 21:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.126731 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 21:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.126731 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 21:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.126731 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 21:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.126731 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 21:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.126731 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 21:02:53 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2010-May-20 21:02:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 21:02:58 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-May-20 21:02:58 INFO1 got_mock_message: From MOCK: DONE with observation 2010-May-20 21:02:58 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-May-20 21:02:58 LOG5 end_task: Level: (5) ID = <10209> Status = 0 0 0 0 ok 2010-May-20 21:02:58 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-May-20 21:02:58 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2010-May-20 21:02:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-20 21:02:58 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2010-May-20 21:02:58 LOG5 finish_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-May-20 21:02:58 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2010-May-20 21:02:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 21:02:58 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2010-May-20 21:02:58 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-May-20 21:02:58 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2010-May-20 21:02:58 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 27.07 and ZA = 11.49 2010-May-20 21:02:58 LOG3 track_source: Calling 'track_source AGESVC1A_p2_036 27.07 11.4851395320 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-20 21:02:58 START begin_task: Starting task 'sending tracking commands' 2010-May-20 21:02:58 LOG5 begin_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2010-May-20 21:02:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p2_036} INFO {Slewing to source 'AGESVC1A_p2_036' ...} 2010-May-20 21:02:58 INFO1 track_source: Starting to track AGESVC1A_p2_036 2010-May-20 21:02:58 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p2_036" 2010-May-20 21:02:58 LOG3 vw_send: To DATATAKING: set ra 27.07 2010-May-20 21:02:58 LOG3 vw_send: To DATATAKING: set dec 11.4851395320 2010-May-20 21:02:58 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-20 21:02:58 LOG3 vw_send: To DATATAKING: pnt tr 27.07 11.4851395320 -CF 2010-May-20 21:02:58 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-20 21:02:58 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-20 21:02:58 LOG5 finish_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2010-May-20 21:02:58 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-20 21:02:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 21:02:58 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-20 21:02:58 LOG5 end_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2010-May-20 21:02:58 LOG1 fixed_driftmap: Parameters: HA = +00:21:00.2 Start = 12:30:33.7 LST = 12:30:13.4 diff = 20.3 secs 2010-May-20 21:02:58 INFO2 fixed_driftmap: Waiting 18.3 seconds for RA 12:09:34 2010-May-20 21:02:58 INFO2 lstwait: Waiting for 18.3 secs from LST 12:30:13 to LST 12:30:32 ... 2010-May-20 21:02:58 LOG4 send_obs_status: To obs_status: <1> TASKTIME 18.285974199334667 BITMAP stat_wait MESSAGE {Waiting ...} 2010-May-20 21:02:58 START begin_task: Starting task 'waiting on wait on LST' 2010-May-20 21:02:58 LOG5 begin_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2010-May-20 21:02:58 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p2_036" 2010-May-20 21:02:58 LOG4 got_cormsg: From DATATAKING: set ra 27.07 2010-May-20 21:02:58 LOG4 got_cormsg: From DATATAKING: set dec 11.4851395320 2010-May-20 21:02:58 LOG4 got_cormsg: From DATATAKING: vw% 27.07 2010-May-20 21:02:58 LOG4 got_cormsg: From DATATAKING: vw% 11.4851395320 2010-May-20 21:02:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:02:58 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-20 21:02:58 LOG4 got_cormsg: From DATATAKING: pnt tr 27.07 11.4851395320 -CF 2010-May-20 21:02:58 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-20 21:02:58 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-20 21:02:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:03:16 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-May-20 21:03:16 LOG5 end_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2010-May-20 21:03:16 LOG4 lstwait: Finished waiting 0.72 seconds late 2010-May-20 21:03:16 INFO3 lstwait: Finished waiting 2010-May-20 21:03:16 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-May-20 21:03:16 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2010-May-20 21:03:16 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-May-20 21:03:16 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2010-May-20 21:03:16 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-20 21:03:16 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-May-20 21:03:16 LOG5 begin_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2010-May-20 21:03:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-20 21:03:16 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-20 21:03:16 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-May-20 21:03:16 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-May-20 21:03:16 LOG3 take_mock_data: PSET configuration: obsnm=RT 2010-May-20 21:03:16 LOG3 take_mock_data: PSET configuration: object=AGESVC1A_p2_036 2010-May-20 21:03:16 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-May-20 21:03:16 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-May-20 21:03:16 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-May-20 21:03:16 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-May-20 21:03:16 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-May-20 21:03:16 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-May-20 21:03:16 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2010-May-20 21:03:16 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2010-May-20 21:03:16 LOG3 take_mock_data: PSET configuration: patternid=14000140 2010-May-20 21:03:16 LOG3 take_mock_data: PSET configuration: scanid=14000140 2010-May-20 21:03:16 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-May-20 21:03:16 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-May-20 21:03:16 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-May-20 21:03:16 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456126731.0 2010-May-20 21:03:16 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306126731.0 2010-May-20 21:03:16 LOG3 take_mock_data: PSET configuration: filetype=1 2010-May-20 21:03:16 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-May-20 21:03:17 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=RT:object=AGESVC1A_p2_036:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=14000140:scanid=14000140:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456126731.0:topobfreqhz=1306126731.0:filetype=1 2010-May-20 21:03:17 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-May-20 21:03:17 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2010-May-20 21:03:17 LOG4 from_mock: From MOCK: psetok 2010-May-20 21:03:17 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-May-20 21:03:17 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2010-May-20 21:03:17 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-May-20 21:03:17 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-May-20 21:03:17 LOG3 socket_wait: To MOCK: STAR1200 2010-May-20 21:03:17 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-May-20 21:03:17 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2010-May-20 21:03:17 LOG4 from_mock: From MOCK: starok 2010-May-20 21:03:17 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-May-20 21:03:17 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2010-May-20 21:03:17 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-May-20 21:03:17 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 14000140 2010-May-20 21:03:17 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-May-20 21:03:17 LOG5 begin_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2010-May-20 21:03:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 21:03:17 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-May-20 21:03:17 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-May-20 21:03:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-20 21:03:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3798.00 2010-May-20 21:03:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.126731 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 21:03:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.126731 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 21:03:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.126731 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 21:03:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.126731 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 21:03:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.126731 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 21:03:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.126731 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 21:03:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.126731 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 21:03:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.126731 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 21:03:19 INFO2 got_mock_message: Mock spectrometer start file number is 00500 2010-May-20 21:03:19 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-May-20 21:03:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.126731 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 21:03:19 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2010-May-20 21:03:19 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2010-May-20 21:03:19 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-May-20 21:03:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-May-20 21:03:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-May-20 21:03:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-May-20 21:03:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-May-20 21:03:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-May-20 21:03:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-May-20 21:03:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-May-20 21:03:19 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-May-20 21:03:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.16 GB 2010-May-20 21:03:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.16 GB 2010-May-20 21:03:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.16 GB 2010-May-20 21:03:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.16 GB 2010-May-20 21:03:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.16 GB 2010-May-20 21:03:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.16 GB 2010-May-20 21:03:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.16 GB 2010-May-20 21:03:22 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 21:03:22.02 2010-May-20 21:03:22 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1274403802.02 Thu May 20 21:03:22 2010 2010-May-20 21:03:22 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-May-20 21:23:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 21:23:23 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-May-20 21:23:23 INFO1 got_mock_message: From MOCK: DONE with observation 2010-May-20 21:23:23 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-May-20 21:23:23 LOG5 end_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2010-May-20 21:23:23 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-May-20 21:23:23 LOG5 end_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2010-May-20 21:23:23 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-May-20 21:23:23 LOG5 finish_task: Level: (2) ID = <10173> Status = 0 0 0 0 ok 2010-May-20 21:23:23 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2010-May-20 21:23:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-20 21:23:23 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2010-May-20 21:23:23 LOG5 end_task: Level: (2) ID = <10173> Status = 0 0 0 0 ok 2010-May-20 21:23:23 COMMAND run_command_line: EXECUTING command 50: 'ENDIF' 2010-May-20 21:23:23 COMMAND run_command_line: EXECUTING command 53: 'IF LSTSLEW(AGESVC1B_p2_028) < 125332 THEN' 2010-May-20 21:23:23 LOG3 is_if_valid: Current source data: up 387.7 11.3 UP - - 48 0.1 2010-May-20 21:23:23 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1B_p2_028) < 125332 2010-May-20 21:23:23 INFO5 is_if_valid: Condition parsed as: 12.846596666666667 < 12.892222222222221 2010-May-20 21:23:23 COMMAND run_command_line: EXECUTING command 54: 'FIXEDDRIFT az=30.81 alfaangle=-6.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_028 ra=122900.00 dec=81930.00' 2010-May-20 21:23:23 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-May-20 21:23:24 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-20 21:23:24 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 30.81 -6.7 hcorcal 5 tracking no off lcorcal first 1 AGESVC1B_p2_028 122900.00 81930.00 J 8500.0 Heliocentric velocity(optical)' 2010-May-20 21:23:24 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-May-20 21:23:24 LOG5 begin_task: Level: (2) ID = <10216> Status = 0 0 0 0 ok 2010-May-20 21:23:24 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGESVC1A_p2_036' 2010-May-20 21:23:24 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-May-20 21:23:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p2_028} 2010-May-20 21:23:24 INFO3 fixed_driftmap: Sending telescope to Az = 30.81 and ZA = 11.65 2010-May-20 21:23:24 LOG3 track_source: Calling 'track_source AGESVC1B_p2_028 30.81 11.6518010231 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-20 21:23:24 START begin_task: Starting task 'sending tracking commands' 2010-May-20 21:23:24 LOG5 begin_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2010-May-20 21:23:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_028} INFO {Slewing to source 'AGESVC1B_p2_028' ...} 2010-May-20 21:23:24 INFO1 track_source: Starting to track AGESVC1B_p2_028 2010-May-20 21:23:24 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_028" 2010-May-20 21:23:24 LOG3 vw_send: To DATATAKING: set ra 30.81 2010-May-20 21:23:24 LOG3 vw_send: To DATATAKING: set dec 11.6518010231 2010-May-20 21:23:24 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-20 21:23:24 LOG3 vw_send: To DATATAKING: pnt tr 30.81 11.6518010231 -CF 2010-May-20 21:23:24 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-20 21:23:24 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-20 21:23:24 LOG5 finish_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2010-May-20 21:23:24 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-20 21:23:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 21:23:24 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-20 21:23:24 LOG5 end_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2010-May-20 21:23:24 START begin_task: Starting task 'rotate ALFA to -6.7 degrees' 2010-May-20 21:23:24 LOG5 begin_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2010-May-20 21:23:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -6.7 degrees ...} 2010-May-20 21:23:24 INFO2 rotate_alfa: ALFA commanded to -6.7 degrees 2010-May-20 21:23:24 LOG3 sock_errsend: To ALFAMOTOR: POSITION -6.7 REPLY 2010-May-20 21:23:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-May-20 21:23:24 START begin_task: Starting task 'waiting on ALFA rotation' 2010-May-20 21:23:24 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2010-May-20 21:23:24 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_028" 2010-May-20 21:23:24 LOG4 got_cormsg: From DATATAKING: set ra 30.81 2010-May-20 21:23:24 LOG4 got_cormsg: From DATATAKING: set dec 11.6518010231 2010-May-20 21:23:24 LOG4 got_cormsg: From DATATAKING: vw% 30.81 2010-May-20 21:23:24 LOG4 got_cormsg: From DATATAKING: vw% 11.6518010231 2010-May-20 21:23:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:23:24 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-20 21:23:24 LOG4 got_cormsg: From DATATAKING: pnt tr 30.81 11.6518010231 -CF 2010-May-20 21:23:24 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-20 21:23:24 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-20 21:23:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:23:27 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-May-20 21:23:27 INFO3 alfa_motor: ALFA rotator in-position -6.70 degrees 2010-May-20 21:23:27 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-May-20 21:23:27 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2010-May-20 21:23:27 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-20 21:23:27 STOP finish_task: Finishing task 'rotate ALFA to -6.7 degrees' 2010-May-20 21:23:27 LOG5 finish_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2010-May-20 21:23:27 INFO2 finish_task: DONE finished configuration: rotating ALFA to -6.7 degrees 2010-May-20 21:23:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 21:23:27 STOP end_task: Finishing task 'rotate ALFA to -6.7 degrees' with status 'OK' 2010-May-20 21:23:27 LOG5 end_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2010-May-20 21:23:27 START begin_task: Starting task 'waiting on telescope' 2010-May-20 21:23:27 LOG5 begin_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2010-May-20 21:23:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-20 21:23:27 LOG3 waittrk: Start waittrk 5 2010-May-20 21:23:27 START begin_task: Starting task 'waiting on telescope movement' 2010-May-20 21:23:27 LOG5 begin_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2010-May-20 21:23:32 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-20 21:23:32 LOG5 end_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2010-May-20 21:23:32 START begin_task: Starting task 'waiting on telescope on source' 2010-May-20 21:23:32 LOG5 begin_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2010-May-20 21:23:49 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-20 21:23:49 LOG5 end_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2010-May-20 21:23:49 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-20 21:23:49 INFO2 waittrk: Now tracking AGESVC1B_p2_028 2010-May-20 21:23:49 LOG4 waittrk: Current telescope position: Az = 390.55 ZA = 11.63 2010-May-20 21:23:49 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-20 21:23:49 LOG5 finish_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2010-May-20 21:23:49 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-20 21:23:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 21:23:49 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-20 21:23:49 LOG5 end_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2010-May-20 21:23:49 START begin_task: Starting task 'selecting calibration type' 2010-May-20 21:23:49 LOG5 begin_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2010-May-20 21:23:49 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-20 21:23:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-20 21:23:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-20 21:23:49 START begin_task: Starting task 'waiting on setcal' 2010-May-20 21:23:49 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2010-May-20 21:23:49 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-20 21:23:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-20 21:23:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:23:50 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-20 21:23:50 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-20 21:23:50 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2010-May-20 21:23:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-20 21:23:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-20 21:23:50 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-20 21:23:50 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-20 21:23:50 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2010-May-20 21:23:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:23:50 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-20 21:23:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-20 21:23:50 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2010-May-20 21:23:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-20 21:23:50 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-20 21:23:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-20 21:23:50 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-20 21:23:50 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-20 21:23:50 LOG5 begin_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2010-May-20 21:23:50 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-20 21:23:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-20 21:23:50 LOG5 end_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2010-May-20 21:23:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-20 21:23:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-20 21:23:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-20 21:23:51 LOG5 end_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2010-May-20 21:23:51 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2010-May-20 21:23:51 INFO2 astwait: Waiting for 82 seconds from 01:23:51 to 01:25:13 UTC ... 2010-May-20 21:23:51 LOG4 send_obs_status: To obs_status: <1> TASKTIME 82 BITMAP stat_wait MESSAGE {Waiting ...} 2010-May-20 21:23:51 START begin_task: Starting task 'waiting on waiting for AST time' 2010-May-20 21:23:51 LOG5 begin_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2010-May-20 21:25:13 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2010-May-20 21:25:13 LOG5 end_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2010-May-20 21:25:13 INFO3 astwait: Finished waiting 2010-May-20 21:25:13 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-May-20 21:25:13 LOG5 dopset_later: Calling 'dopset_later 61.227963538998836' 2010-May-20 21:25:13 INFO3 dopset_later: Setting Doppler correction for 21:26:13 (61.2 seconds from now) 2010-May-20 21:25:13 LOG5 antvel: Calling 'antvel 30.810000 11.651801 F Heliocentric 61.227963538998836' 2010-May-20 21:25:13 LOG2 antvel: Transforming current Az = 30.81 ZA = 11.65 to apparent RA = 12:29:33.3 Dec = +08:15:55.4 2010-May-20 21:25:13 LOG2 antvel: Parameters to Doppler: Heliocentric 91573 2010 140 0.0 2010-May-20 21:25:13 INFO5 antvel: Computed antenna velocity: +23.97604 km/s 2010-May-20 21:25:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=23.976037947999998 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-May-20 21:25:13 INFO4 dopset_gen: New sky frequencies: 1381.132972 1381.132972 1381.132972 1381.132972 1381.132972 1381.132972 1381.132972 1381.132972 1381.132972 2010-May-20 21:25:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.132972 sky0=1381.132972 sky1=1381.132972 sky2=1381.132972 sky3=1381.132972 sky4=1381.132972 sky5=1381.132972 sky6=1381.132972 sky7=1381.132972 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-20 21:25:13 LOG2 dopset_gen: Result from 'sky2syn': 1631.132972 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-20 21:25:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631132972.0} 2010-May-20 21:25:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 21:25:13 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2010-May-20 21:25:13 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2010-May-20 21:25:13 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:28:03.3 Dec = +08:19:22.0 2010-May-20 21:25:13 LOG3 track_source: Calling 'track_source AGESVC1B_p2_028 122803.3 081922.0 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-20 21:25:13 START begin_task: Starting task 'sending tracking commands' 2010-May-20 21:25:13 LOG5 begin_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2010-May-20 21:25:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_028} INFO {Slewing to source 'AGESVC1B_p2_028' ...} 2010-May-20 21:25:13 INFO1 track_source: Starting to track AGESVC1B_p2_028 2010-May-20 21:25:13 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_028" 2010-May-20 21:25:13 LOG3 vw_send: To DATATAKING: set ra 122803.3 2010-May-20 21:25:13 LOG3 vw_send: To DATATAKING: set dec 081922.0 2010-May-20 21:25:13 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-20 21:25:13 LOG3 vw_send: To DATATAKING: pnt tr 122803.3 081922.0 -CJ 2010-May-20 21:25:13 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-20 21:25:13 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-20 21:25:13 LOG5 finish_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2010-May-20 21:25:13 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-20 21:25:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 21:25:13 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-20 21:25:13 LOG5 end_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2010-May-20 21:25:13 START begin_task: Starting task 'waiting on telescope' 2010-May-20 21:25:13 LOG5 begin_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2010-May-20 21:25:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-20 21:25:13 LOG3 waittrk: Start waittrk 5 2010-May-20 21:25:13 START begin_task: Starting task 'waiting on telescope movement' 2010-May-20 21:25:13 LOG5 begin_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2010-May-20 21:25:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631132972.0} 2010-May-20 21:25:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-20 21:25:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:25:13 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_028" 2010-May-20 21:25:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:25:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:25:13 LOG4 got_cormsg: From DATATAKING: set ra 122803.3 2010-May-20 21:25:13 LOG4 got_cormsg: From DATATAKING: set dec 081922.0 2010-May-20 21:25:13 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-20 21:25:13 LOG4 got_cormsg: From DATATAKING: pnt tr 122803.3 081922.0 -CJ 2010-May-20 21:25:13 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-20 21:25:13 LOG4 got_cormsg: From DATATAKING: 122803.3 2010-May-20 21:25:13 LOG4 got_cormsg: From DATATAKING: vw% 081922.0 2010-May-20 21:25:13 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2010-May-20 21:25:18 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-20 21:25:18 LOG5 end_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2010-May-20 21:25:18 START begin_task: Starting task 'waiting on telescope on source' 2010-May-20 21:25:18 LOG5 begin_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2010-May-20 21:25:20 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-20 21:25:20 LOG5 end_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2010-May-20 21:25:20 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-20 21:25:20 INFO2 waittrk: Now tracking AGESVC1B_p2_028 2010-May-20 21:25:20 LOG4 waittrk: Current telescope position: Az = 390.62 ZA = 11.64 2010-May-20 21:25:20 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-20 21:25:20 LOG5 finish_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2010-May-20 21:25:20 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-20 21:25:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 21:25:20 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-20 21:25:20 LOG5 end_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2010-May-20 21:25:20 START begin_task: Starting task 'adjusting WAPP+Mock power' 2010-May-20 21:25:20 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2010-May-20 21:25:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2010-May-20 21:25:20 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2010-May-20 21:25:20 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-May-20 21:25:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-May-20 21:25:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-20 21:25:20 START begin_task: Starting task 'waiting on adjpwrif2' 2010-May-20 21:25:20 LOG5 begin_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2010-May-20 21:25:20 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-May-20 21:25:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-20 21:25:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:25:23 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-20 21:25:23 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-May-20 21:25:23 LOG5 end_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2010-May-20 21:25:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-May-20 21:25:23 START begin_task: Starting task 'adjusting WAPP power' 2010-May-20 21:25:23 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2010-May-20 21:25:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-20 21:25:23 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-May-20 21:25:23 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-May-20 21:25:23 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-May-20 21:25:23 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-May-20 21:25:23 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-May-20 21:25:23 LOG5 begin_task: Level: (5) ID = <10235> Status = 0 0 0 0 ok 2010-May-20 21:25:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:25:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-May-20 21:25:24 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-May-20 21:25:24 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 4 3 dB 2010-May-20 21:25:24 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 5 dB 2010-May-20 21:25:24 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-May-20 21:25:24 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-May-20 21:25:24 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-May-20 21:25:24 LOG5 end_task: Level: (5) ID = <10235> Status = 0 0 0 0 ok 2010-May-20 21:25:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.983 0.968 ALFA beam 1: 1.048 1.059 2010-May-20 21:25:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.985 0.950 ALFA beam 3: 0.936 1.016 2010-May-20 21:25:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.944 0.922 ALFA beam 5: 0.976 1.021 2010-May-20 21:25:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.979 0.922 ALFA beam 7: 1.065 1.074 2010-May-20 21:25:24 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-20 21:25:24 LOG5 finish_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2010-May-20 21:25:24 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-May-20 21:25:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 21:25:24 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-20 21:25:24 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2010-May-20 21:25:24 START begin_task: Starting task 'adjusting Mock spectrometer power' 2010-May-20 21:25:24 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2010-May-20 21:25:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-20 21:25:24 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2010-May-20 21:25:24 LOG3 socket_wait: To MOCK: ADJP30 2010-May-20 21:25:24 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2010-May-20 21:25:24 LOG5 begin_task: Level: (5) ID = <10237> Status = 0 0 0 0 ok 2010-May-20 21:25:30 INFO3 from_mock: From MOCK: b0s0g0 rms:A 30.1 26.6 B 29.1 29.0 mn:A -0.4 -0.7 B -0.9 -1.0 gn: 9 10 2010-May-20 21:25:30 INFO3 from_mock: From MOCK: b0s1g0 rms:A 27.5 26.3 B 26.9 28.4 mn:A 0.8 -0.8 B 0.4 0.4 gn: 9 10 2010-May-20 21:25:30 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.4 29.6 B 32.7 29.5 mn:A -0.2 0.4 B 0.1 1.4 gn: 9 10 2010-May-20 21:25:30 INFO3 from_mock: From MOCK: b1s1g0 rms:A 29.3 26.9 B 30.1 30.1 mn:A 0.0 0.3 B -0.6 0.1 gn: 9 9 2010-May-20 21:25:30 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.5 28.6 B 28.0 29.2 mn:A 0.1 -0.1 B 0.1 0.2 gn: 12 11 2010-May-20 21:25:30 INFO3 from_mock: From MOCK: b2s1g0 rms:A 27.9 28.2 B 28.6 26.5 mn:A -0.1 -0.5 B 0.0 0.1 gn: 13 11 2010-May-20 21:25:30 INFO3 from_mock: From MOCK: b3s0g0 rms:A 30.3 30.2 B 33.0 29.4 mn:A 0.4 -0.2 B -0.0 -0.3 gn: 11 12 2010-May-20 21:25:30 INFO3 from_mock: From MOCK: b3s1g0 rms:A 29.0 28.3 B 27.9 29.0 mn:A 0.1 -0.2 B -0.3 0.2 gn: 10 11 2010-May-20 21:25:30 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.7 29.8 B 30.4 30.6 mn:A 0.5 -0.4 B -0.0 0.4 gn: 10 14 2010-May-20 21:25:30 INFO3 from_mock: From MOCK: b4s1g0 rms:A 29.5 26.7 B 30.0 28.8 mn:A -0.4 -0.8 B 0.6 -0.7 gn: 11 17 2010-May-20 21:25:30 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.3 28.9 B 31.2 31.0 mn:A 0.3 0.1 B -0.3 -0.3 gn: 10 10 2010-May-20 21:25:30 INFO3 from_mock: From MOCK: b5s1g0 rms:A 26.7 26.1 B 29.3 29.4 mn:A 0.0 -0.1 B 0.3 0.8 gn: 9 9 2010-May-20 21:25:30 INFO3 from_mock: From MOCK: b6s0g0 rms:A 31.3 28.6 B 29.7 30.1 mn:A -0.5 0.1 B -0.3 0.6 gn: 12 16 2010-May-20 21:25:30 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.5 27.9 B 29.9 29.3 mn:A -0.4 0.3 B 0.3 -0.3 gn: 13 17 2010-May-20 21:25:30 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2010-May-20 21:25:30 LOG5 end_task: Level: (5) ID = <10237> Status = 0 0 0 0 ok 2010-May-20 21:25:30 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2010-May-20 21:25:30 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2010-May-20 21:25:30 LOG5 finish_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2010-May-20 21:25:30 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2010-May-20 21:25:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 21:25:30 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2010-May-20 21:25:30 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2010-May-20 21:25:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-20 21:25:30 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2010-May-20 21:25:30 LOG5 finish_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2010-May-20 21:25:30 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2010-May-20 21:25:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 21:25:30 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2010-May-20 21:25:30 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2010-May-20 21:25:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-20 21:25:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-20 21:25:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-20 21:25:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-20 21:25:30 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2010-May-20 21:25:30 START begin_task: Starting task 'WAPP+Mock calibration' 2010-May-20 21:25:30 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2010-May-20 21:25:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2010-May-20 21:25:30 START begin_task: Starting task 'selecting calibration type' 2010-May-20 21:25:30 LOG5 begin_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2010-May-20 21:25:30 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-20 21:25:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-20 21:25:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-20 21:25:30 START begin_task: Starting task 'waiting on setcal' 2010-May-20 21:25:30 LOG5 begin_task: Level: (5) ID = <10240> Status = 0 0 0 0 ok 2010-May-20 21:25:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-20 21:25:30 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-20 21:25:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-20 21:25:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:25:30 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-20 21:25:30 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-20 21:25:30 LOG5 end_task: Level: (5) ID = <10240> Status = 0 0 0 0 ok 2010-May-20 21:25:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-20 21:25:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-20 21:25:31 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-20 21:25:31 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-20 21:25:31 LOG5 begin_task: Level: (5) ID = <10241> Status = 0 0 0 0 ok 2010-May-20 21:25:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:25:31 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-20 21:25:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-20 21:25:31 LOG5 end_task: Level: (5) ID = <10241> Status = 0 0 0 0 ok 2010-May-20 21:25:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-20 21:25:31 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-20 21:25:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-20 21:25:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-20 21:25:31 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-20 21:25:31 LOG5 begin_task: Level: (5) ID = <10242> Status = 0 0 0 0 ok 2010-May-20 21:25:31 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-20 21:25:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-20 21:25:31 LOG5 end_task: Level: (5) ID = <10242> Status = 0 0 0 0 ok 2010-May-20 21:25:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-20 21:25:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-20 21:25:31 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-20 21:25:31 LOG5 end_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2010-May-20 21:25:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-20 21:25:31 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-20 21:25:31 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-20 21:25:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-20 21:25:31 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2010-May-20 21:25:31 NOTE WAPPDATA-new_file: New FITS file: wapp.20100520.a2048.0003.fits 2010-May-20 21:25:31 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-20 21:25:31 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100520.a2048.0003.fits} 2010-May-20 21:25:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-20 21:25:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-20 21:25:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-20 21:25:31 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2010-May-20 21:25:31 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-20 21:25:31 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-May-20 21:25:31 LOG5 begin_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2010-May-20 21:25:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-20 21:25:31 LOG5 log_alfabeam: Parameters: 12.467583333333334 8.3227777777777767 12.880583 2010.3857432124116 -6.700086 2010-May-20 21:25:31 LOG4 log_alfabeam: ALFABEAM 0 12.467583333333344 8.322777777777782 2010-May-20 21:25:31 LOG4 log_alfabeam: ALFABEAM 1 12.467266377236040 8.424043166772256 2010-May-20 21:25:31 LOG4 log_alfabeam: ALFABEAM 2 12.461859774420727 8.357259846826713 2010-May-20 21:25:31 LOG4 log_alfabeam: ALFABEAM 3 12.462183616657343 8.255755774673180 2010-May-20 21:25:31 LOG4 log_alfabeam: ALFABEAM 4 12.467954681164301 8.221340597469663 2010-May-20 21:25:31 LOG4 log_alfabeam: ALFABEAM 5 12.473317938256772 8.288976045347153 2010-May-20 21:25:31 LOG4 log_alfabeam: ALFABEAM 6 12.472953577637741 8.390175435518467 2010-May-20 21:25:31 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-May-20 21:25:31 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-May-20 21:25:31 LOG3 take_mock_data: PSET configuration: obsnm=RT 2010-May-20 21:25:31 LOG3 take_mock_data: PSET configuration: object=AGESVC1B_p2_028 2010-May-20 21:25:31 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-May-20 21:25:31 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-May-20 21:25:31 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-May-20 21:25:31 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-May-20 21:25:31 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-May-20 21:25:31 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-May-20 21:25:31 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2010-May-20 21:25:31 LOG3 take_mock_data: PSET configuration: scantype=ON 2010-May-20 21:25:31 LOG3 take_mock_data: PSET configuration: patternid=14000140 2010-May-20 21:25:31 LOG3 take_mock_data: PSET configuration: scanid=14000141 2010-May-20 21:25:31 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-May-20 21:25:31 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-May-20 21:25:31 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-May-20 21:25:31 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456132972.0 2010-May-20 21:25:31 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306132972.0 2010-May-20 21:25:31 LOG3 take_mock_data: PSET configuration: filetype=1 2010-May-20 21:25:31 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-May-20 21:25:31 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=RT:object=AGESVC1B_p2_028:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=14000140:scanid=14000141:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456132972.0:topobfreqhz=1306132972.0:filetype=1 2010-May-20 21:25:31 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-May-20 21:25:31 LOG5 begin_task: Level: (5) ID = <10245> Status = 0 0 0 0 ok 2010-May-20 21:25:31 LOG4 from_mock: From MOCK: psetok 2010-May-20 21:25:31 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-May-20 21:25:31 LOG5 end_task: Level: (5) ID = <10245> Status = 0 0 0 0 ok 2010-May-20 21:25:31 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-May-20 21:25:31 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-May-20 21:25:31 LOG3 socket_wait: To MOCK: STAR5 2010-May-20 21:25:31 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-May-20 21:25:31 LOG5 begin_task: Level: (5) ID = <10246> Status = 0 0 0 0 ok 2010-May-20 21:25:31 LOG4 from_mock: From MOCK: starok 2010-May-20 21:25:31 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-May-20 21:25:31 LOG5 end_task: Level: (5) ID = <10246> Status = 0 0 0 0 ok 2010-May-20 21:25:31 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-May-20 21:25:31 INFO2 take_data: Starting WAPP+Mock 5-second scan: 14000141 2010-May-20 21:25:32 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-May-20 21:25:32 LOG5 begin_task: Level: (5) ID = <10247> Status = 0 0 0 0 ok 2010-May-20 21:25:32 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-May-20 21:25:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 21:25:32 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-May-20 21:25:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-20 21:25:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5133.00 2010-May-20 21:25:33 INFO2 got_mock_message: Mock spectrometer start file number is 00600 2010-May-20 21:25:33 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-May-20 21:25:33 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2010-May-20 21:25:33 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2010-May-20 21:25:33 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-May-20 21:25:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-May-20 21:25:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-May-20 21:25:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-May-20 21:25:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-May-20 21:25:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-May-20 21:25:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-May-20 21:25:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-May-20 21:25:33 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-May-20 21:25:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2010-May-20 21:25:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2010-May-20 21:25:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2010-May-20 21:25:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2010-May-20 21:25:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2010-May-20 21:25:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2010-May-20 21:25:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2010-May-20 21:25:36 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 21:25:36.01 2010-May-20 21:25:36 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1274405136.01 Thu May 20 21:25:36 2010 2010-May-20 21:25:36 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-May-20 21:25:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.132972 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 21:25:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.132972 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 21:25:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.132972 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 21:25:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.132972 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 21:25:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.132972 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 21:25:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.132972 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 21:25:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.132972 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 21:25:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.132972 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 21:25:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.132972 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 21:25:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 21:25:42 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-May-20 21:25:42 INFO1 got_mock_message: From MOCK: DONE with observation 2010-May-20 21:25:42 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-May-20 21:25:42 LOG5 end_task: Level: (5) ID = <10247> Status = 0 0 0 0 ok 2010-May-20 21:25:42 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-May-20 21:25:42 LOG5 end_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2010-May-20 21:25:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-20 21:25:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-20 21:25:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-20 21:25:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-20 21:25:42 LOG5 begin_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2010-May-20 21:25:42 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-20 21:25:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-20 21:25:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-20 21:25:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-20 21:25:42 LOG5 end_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2010-May-20 21:25:42 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2010-May-20 21:25:42 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-May-20 21:25:42 LOG5 begin_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2010-May-20 21:25:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2010-May-20 21:25:42 LOG5 log_alfabeam: Parameters: 12.467583333333334 8.3227777777777767 12.883646 2010.3857435609807 -6.700086 2010-May-20 21:25:42 LOG4 log_alfabeam: ALFABEAM 0 12.467583333333339 8.322777777777771 2010-May-20 21:25:42 LOG4 log_alfabeam: ALFABEAM 1 12.467288251609409 8.424057934551360 2010-May-20 21:25:42 LOG4 log_alfabeam: ALFABEAM 2 12.461867254668228 8.357531907997492 2010-May-20 21:25:42 LOG4 log_alfabeam: ALFABEAM 3 12.462169167779530 8.256013217469681 2010-May-20 21:25:42 LOG4 log_alfabeam: ALFABEAM 4 12.467932672522284 8.221323582311481 2010-May-20 21:25:42 LOG4 log_alfabeam: ALFABEAM 5 12.473310578347359 8.288702069362527 2010-May-20 21:25:42 LOG4 log_alfabeam: ALFABEAM 6 12.472968171363856 8.389918615889156 2010-May-20 21:25:42 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-May-20 21:25:42 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-May-20 21:25:42 LOG3 take_mock_data: PSET configuration: obsnm=RT 2010-May-20 21:25:42 LOG3 take_mock_data: PSET configuration: object=AGESVC1B_p2_028 2010-May-20 21:25:42 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-May-20 21:25:42 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-May-20 21:25:42 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-May-20 21:25:42 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-May-20 21:25:42 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-May-20 21:25:42 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-May-20 21:25:42 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2010-May-20 21:25:42 LOG3 take_mock_data: PSET configuration: scantype=OFF 2010-May-20 21:25:42 LOG3 take_mock_data: PSET configuration: patternid=14000140 2010-May-20 21:25:42 LOG3 take_mock_data: PSET configuration: scanid=14000142 2010-May-20 21:25:42 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-May-20 21:25:42 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-May-20 21:25:42 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-May-20 21:25:42 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456132972.0 2010-May-20 21:25:42 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306132972.0 2010-May-20 21:25:42 LOG3 take_mock_data: PSET configuration: filetype=1 2010-May-20 21:25:42 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-May-20 21:25:42 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=RT:object=AGESVC1B_p2_028:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=14000140:scanid=14000142:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456132972.0:topobfreqhz=1306132972.0:filetype=1 2010-May-20 21:25:42 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-May-20 21:25:42 LOG5 begin_task: Level: (5) ID = <10250> Status = 0 0 0 0 ok 2010-May-20 21:25:42 LOG4 from_mock: From MOCK: psetok 2010-May-20 21:25:42 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-May-20 21:25:42 LOG5 end_task: Level: (5) ID = <10250> Status = 0 0 0 0 ok 2010-May-20 21:25:42 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-May-20 21:25:42 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-May-20 21:25:42 LOG3 socket_wait: To MOCK: STAR5 2010-May-20 21:25:42 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-May-20 21:25:42 LOG5 begin_task: Level: (5) ID = <10251> Status = 0 0 0 0 ok 2010-May-20 21:25:42 LOG4 from_mock: From MOCK: starok 2010-May-20 21:25:42 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-May-20 21:25:42 LOG5 end_task: Level: (5) ID = <10251> Status = 0 0 0 0 ok 2010-May-20 21:25:42 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-May-20 21:25:42 INFO2 take_data: Starting WAPP+Mock 5-second scan: 14000142 2010-May-20 21:25:42 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-May-20 21:25:42 LOG5 begin_task: Level: (5) ID = <10252> Status = 0 0 0 0 ok 2010-May-20 21:25:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 21:25:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2010-May-20 21:25:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5143.00 2010-May-20 21:25:43 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-May-20 21:25:43 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-May-20 21:25:44 INFO2 got_mock_message: Mock spectrometer start file number is 00700 2010-May-20 21:25:44 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-May-20 21:25:44 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2010-May-20 21:25:44 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2010-May-20 21:25:44 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-May-20 21:25:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-May-20 21:25:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-May-20 21:25:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-May-20 21:25:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-May-20 21:25:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-May-20 21:25:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-May-20 21:25:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-May-20 21:25:44 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-May-20 21:25:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2010-May-20 21:25:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2010-May-20 21:25:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2010-May-20 21:25:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2010-May-20 21:25:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2010-May-20 21:25:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2010-May-20 21:25:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2010-May-20 21:25:48 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 21:25:48.01 2010-May-20 21:25:48 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1274405148.01 Thu May 20 21:25:48 2010 2010-May-20 21:25:48 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-May-20 21:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.132972 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 21:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.132972 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 21:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.132972 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 21:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.132972 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 21:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.132972 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 21:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.132972 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 21:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.132972 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 21:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.132972 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 21:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.132972 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 21:25:48 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2010-May-20 21:25:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 21:25:54 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-May-20 21:25:54 INFO1 got_mock_message: From MOCK: DONE with observation 2010-May-20 21:25:54 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-May-20 21:25:54 LOG5 end_task: Level: (5) ID = <10252> Status = 0 0 0 0 ok 2010-May-20 21:25:54 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-May-20 21:25:54 LOG5 end_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2010-May-20 21:25:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-20 21:25:54 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2010-May-20 21:25:54 LOG5 finish_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2010-May-20 21:25:54 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2010-May-20 21:25:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 21:25:54 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2010-May-20 21:25:54 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2010-May-20 21:25:54 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2010-May-20 21:25:54 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 30.81 and ZA = 11.65 2010-May-20 21:25:54 LOG3 track_source: Calling 'track_source AGESVC1B_p2_028 30.81 11.6518010231 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-20 21:25:54 START begin_task: Starting task 'sending tracking commands' 2010-May-20 21:25:54 LOG5 begin_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2010-May-20 21:25:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_028} INFO {Slewing to source 'AGESVC1B_p2_028' ...} 2010-May-20 21:25:54 INFO1 track_source: Starting to track AGESVC1B_p2_028 2010-May-20 21:25:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_028" 2010-May-20 21:25:54 LOG3 vw_send: To DATATAKING: set ra 30.81 2010-May-20 21:25:54 LOG3 vw_send: To DATATAKING: set dec 11.6518010231 2010-May-20 21:25:54 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-20 21:25:54 LOG3 vw_send: To DATATAKING: pnt tr 30.81 11.6518010231 -CF 2010-May-20 21:25:54 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-20 21:25:54 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-20 21:25:54 LOG5 finish_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2010-May-20 21:25:54 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-20 21:25:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-20 21:25:54 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-20 21:25:54 LOG5 end_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2010-May-20 21:25:54 LOG1 fixed_driftmap: Parameters: HA = +00:24:00.0 Start = 12:53:33.4 LST = 12:53:13.2 diff = 20.3 secs 2010-May-20 21:25:54 INFO2 fixed_driftmap: Waiting 18.3 seconds for RA 12:29:33 2010-May-20 21:25:54 INFO2 lstwait: Waiting for 18.2 secs from LST 12:53:13 to LST 12:53:31 ... 2010-May-20 21:25:54 LOG4 send_obs_status: To obs_status: <1> TASKTIME 18.233676543800968 BITMAP stat_wait MESSAGE {Waiting ...} 2010-May-20 21:25:54 START begin_task: Starting task 'waiting on wait on LST' 2010-May-20 21:25:54 LOG5 begin_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2010-May-20 21:25:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_028" 2010-May-20 21:25:54 LOG4 got_cormsg: From DATATAKING: set ra 30.81 2010-May-20 21:25:54 LOG4 got_cormsg: From DATATAKING: set dec 11.6518010231 2010-May-20 21:25:54 LOG4 got_cormsg: From DATATAKING: vw% 30.81 2010-May-20 21:25:54 LOG4 got_cormsg: From DATATAKING: 2010-May-20 21:25:54 LOG4 got_cormsg: From DATATAKING: vw% 11.6518010231 2010-May-20 21:25:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:25:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-20 21:25:54 LOG4 got_cormsg: From DATATAKING: pnt tr 30.81 11.6518010231 -CF 2010-May-20 21:25:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-20 21:25:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-20 21:25:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:26:12 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-May-20 21:26:12 LOG5 end_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2010-May-20 21:26:12 LOG4 lstwait: Finished waiting 0.77 seconds late 2010-May-20 21:26:12 INFO3 lstwait: Finished waiting 2010-May-20 21:26:12 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-May-20 21:26:12 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2010-May-20 21:26:12 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-May-20 21:26:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2010-May-20 21:26:12 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-20 21:26:12 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-May-20 21:26:12 LOG5 begin_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2010-May-20 21:26:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-20 21:26:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-20 21:26:12 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-May-20 21:26:12 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-May-20 21:26:12 LOG3 take_mock_data: PSET configuration: obsnm=RT 2010-May-20 21:26:12 LOG3 take_mock_data: PSET configuration: object=AGESVC1B_p2_028 2010-May-20 21:26:12 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-May-20 21:26:12 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-May-20 21:26:12 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-May-20 21:26:12 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-May-20 21:26:12 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-May-20 21:26:12 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-May-20 21:26:12 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2010-May-20 21:26:12 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2010-May-20 21:26:12 LOG3 take_mock_data: PSET configuration: patternid=14000143 2010-May-20 21:26:12 LOG3 take_mock_data: PSET configuration: scanid=14000143 2010-May-20 21:26:12 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-May-20 21:26:12 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-May-20 21:26:12 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-May-20 21:26:12 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456132972.0 2010-May-20 21:26:12 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306132972.0 2010-May-20 21:26:12 LOG3 take_mock_data: PSET configuration: filetype=1 2010-May-20 21:26:12 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-May-20 21:26:12 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=RT:object=AGESVC1B_p2_028:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=14000143:scanid=14000143:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456132972.0:topobfreqhz=1306132972.0:filetype=1 2010-May-20 21:26:12 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-May-20 21:26:12 LOG5 begin_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2010-May-20 21:26:13 LOG4 from_mock: From MOCK: psetok 2010-May-20 21:26:13 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-May-20 21:26:13 LOG5 end_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2010-May-20 21:26:13 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-May-20 21:26:13 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-May-20 21:26:13 LOG3 socket_wait: To MOCK: STAR1200 2010-May-20 21:26:13 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-May-20 21:26:13 LOG5 begin_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2010-May-20 21:26:13 LOG4 from_mock: From MOCK: starok 2010-May-20 21:26:13 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-May-20 21:26:13 LOG5 end_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2010-May-20 21:26:13 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-May-20 21:26:13 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 14000143 2010-May-20 21:26:13 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-May-20 21:26:13 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2010-May-20 21:26:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-20 21:26:13 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-May-20 21:26:13 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-May-20 21:26:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-20 21:26:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5174.00 2010-May-20 21:26:15 INFO2 got_mock_message: Mock spectrometer start file number is 00800 2010-May-20 21:26:15 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-May-20 21:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.132972 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-20 21:26:15 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2010-May-20 21:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.132972 MHz Flip = 1 Band = 0 Mixer = 950.000000 MHz 2010-May-20 21:26:15 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2010-May-20 21:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.132972 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-May-20 21:26:15 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-May-20 21:26:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-May-20 21:26:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-May-20 21:26:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-May-20 21:26:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-May-20 21:26:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-May-20 21:26:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-May-20 21:26:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-May-20 21:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.132972 MHz Flip = 1 Band = 0 Mixer = 1900.000000 MHz 2010-May-20 21:26:15 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-May-20 21:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.132972 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2010-May-20 21:26:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.16 GB 2010-May-20 21:26:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.16 GB 2010-May-20 21:26:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.16 GB 2010-May-20 21:26:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.16 GB 2010-May-20 21:26:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.16 GB 2010-May-20 21:26:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.16 GB 2010-May-20 21:26:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.16 GB 2010-May-20 21:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.132972 MHz Flip = 1 Band = 0 Mixer = 1675.000000 MHz 2010-May-20 21:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.132972 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-May-20 21:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.132972 MHz Flip = 1 Band = 0 Mixer = 1975.000000 MHz 2010-May-20 21:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.132972 MHz Flip = 1 Band = 0 Mixer = 2075.000000 MHz 2010-May-20 21:26:18 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 21:26:18.01 2010-May-20 21:26:18 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1274405178.01 Thu May 20 21:26:18 2010 2010-May-20 21:26:18 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-May-20 21:46:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-20 21:46:19 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-May-20 21:46:19 INFO1 got_mock_message: From MOCK: DONE with observation 2010-May-20 21:46:19 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-May-20 21:46:19 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2010-May-20 21:46:19 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-May-20 21:46:19 LOG5 end_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2010-May-20 21:46:19 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-May-20 21:46:19 LOG5 finish_task: Level: (2) ID = <10216> Status = 0 0 0 0 ok 2010-May-20 21:46:19 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2010-May-20 21:46:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-20 21:46:19 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2010-May-20 21:46:19 LOG5 end_task: Level: (2) ID = <10216> Status = 0 0 0 0 ok 2010-May-20 21:46:19 COMMAND run_command_line: EXECUTING command 57: 'ENDIF' 2010-May-20 21:46:19 NOTE run_command_file: DONE with command file processing 2010-May-20 21:46:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-May-20 21:46:19 STOP finish_task: Finishing task 'running command file '100520.cmd'' 2010-May-20 21:46:19 LOG5 finish_task: Level: (1) ID = <10028> Status = 0 0 0 0 ok 2010-May-20 21:46:19 DONE finish_task: DONE finished running: command file '100520.cmd' 2010-May-20 21:46:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-20 21:46:19 END end_task: Finishing task 'running command file '100520.cmd'' with status 'OK' 2010-May-20 21:46:19 LOG5 end_task: Level: (1) ID = <10028> Status = 0 0 0 0 ok 2010-May-20 21:46:39 ALERT CIMA-exit_cima: Exiting CIMA ... 2010-May-20 21:46:39 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2010-May-20 21:46:39 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2010-May-20 21:46:39 LOG3 vw_send: To DATATAKING: mvdata a2048 2010-May-20 21:46:39 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2010-May-20 21:46:39 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2010-May-20 21:46:39 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2010-May-20 21:46:39 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2010-May-20 21:46:39 NOTE CIMA-exit_cima: Cleaning up session ... 2010-May-20 21:46:39 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2010-May-20 21:46:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:46:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-20 21:46:41 LOG3 exec_msg: Closing socket