2010-May-07 20:58:14 BEGIN executive: CIMA executive starting ... 2010-May-07 20:58:14 NOTE executive: STARTING NEW CIMA SESSION 2010-May-07 20:58:14 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2010-May-07 20:58:14 INFO4 executive: This is an ON-LINE session 2010-May-07 20:58:14 INFO4 executive: This is a REMOTE session 2010-May-07 20:58:14 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2010-May-07 20:58:14 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'RT' 2010-May-07 20:58:14 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20100507' 2010-May-07 20:58:16 LOG2 log_preferences: Currently applied preferences: 2010-May-07 20:58:16 LOG2 log_preferences: prefs(dailylog) = daily 2010-May-07 20:58:16 LOG2 log_preferences: prefs(offlinelog) = skip 2010-May-07 20:58:16 LOG2 log_preferences: prefs(datawindow) = ignore 2010-May-07 20:58:16 LOG2 log_preferences: prefs(limitwarning) = enabled 2010-May-07 20:58:16 LOG2 log_preferences: prefs(wappfailure) = abort 2010-May-07 20:58:16 LOG2 log_preferences: prefs(helpstyle) = stay-open 2010-May-07 20:58:16 LOG2 log_preferences: prefs(logcolours) = full 2010-May-07 20:58:16 LOG2 log_preferences: prefs(displaylevel) = INFO3 2010-May-07 20:58:16 LOG2 log_preferences: prefs(loglevel) = LOG5 2010-May-07 20:58:16 LOG2 log_preferences: prefs(displayformat) = short 2010-May-07 20:58:16 LOG2 log_preferences: prefs(logformat) = new 2010-May-07 20:58:16 LOG2 log_preferences: prefs(fontsize) = 4 2010-May-07 20:58:16 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2010-May-07 20:58:16 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2010-May-07 20:58:16 ALERT executive: CIMA executive ready 2010-May-07 20:58:18 NOTE frontend: CIMA frontend ready 2010-May-07 20:58:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 20:58:18 LOG4 got_cormsg: From DATATAKING: setup 2010-May-07 20:58:22 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2010-May-07 20:58:22 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2010-May-07 20:58:22 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2010-May-07 20:58:22 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2010-May-07 20:58:22 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-May-07 20:58:22 NOTE select_receiver: Starting to select receiver ALFA 2010-May-07 20:58:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-May-07 20:58:22 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-May-07 20:58:22 LOG3 vw_send: To DATATAKING: acvlbical off 2010-May-07 20:58:22 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-May-07 20:58:22 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-May-07 20:58:22 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-May-07 20:58:22 DONE finish_task: DONE finished selecting: receiver ALFA 2010-May-07 20:58:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-07 20:58:22 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-May-07 20:58:22 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-May-07 20:58:24 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2010-May-07 20:58:24 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2010-May-07 20:58:24 LOG4 got_cormsg: From DATATAKING: vw% io 2010-May-07 20:58:24 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2010-May-07 20:58:24 LOG4 got_cormsg: From DATATAKING: 2010-May-07 20:58:24 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2010-May-07 20:58:24 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2010-May-07 20:58:24 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2010-May-07 20:58:24 LOG4 got_cormsg: From DATATAKING: vw% connectall 2010-May-07 20:58:24 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2010-May-07 20:58:24 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2010-May-07 20:58:24 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2010-May-07 20:58:24 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2010-May-07 20:58:24 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2010-May-07 20:58:24 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2010-May-07 20:58:24 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2010-May-07 20:58:24 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2010-May-07 20:58:24 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2010-May-07 20:58:24 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-May-07 20:58:24 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-May-07 20:58:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 20:58:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 20:58:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 20:58:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 20:58:51 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 20:58:51.301 (seconds: 75531.301)!} 2010-May-07 20:58:51 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 20:58:51.301 (seconds: 75531.301)! 2010-May-07 20:59:10 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-May-07 20:59:10 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-May-07 20:59:10 LOG5 restart_wapp: Calling 'restart_wapp' 2010-May-07 20:59:10 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-May-07 20:59:10 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-May-07 20:59:10 NOTE restart_wapp: Restarting all WAPPs 2010-May-07 20:59:10 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-May-07 20:59:10 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-May-07 20:59:10 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-May-07 20:59:10 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-May-07 20:59:14 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-May-07 20:59:14 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-May-07 20:59:14 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-May-07 20:59:14 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-May-07 21:00:28 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima31.cmd' (at lines 1 - 24) 2010-May-07 21:00:29 INFO4 CIMA-load_command_file: Loaded command file '100507.cmd' 2010-May-07 21:00:31 INFO1 CIMA-run_command_file: Transferring command file '100507.cmd' to executive ... 2010-May-07 21:00:31 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima31.conf} 2010-May-07 21:00:31 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2010-May-07 21:00:31 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2010-May-07 21:00:31 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2010-May-07 21:00:31 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2010-May-07 21:00:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2010-May-07 21:00:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2010-May-07 21:00:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2010-May-07 21:00:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2010-May-07 21:00:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2010-May-07 21:00:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2010-May-07 21:00:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2010-May-07 21:00:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2010-May-07 21:00:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 27 {LOAD ages_mock.conf} 2010-May-07 21:00:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 28 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2010-May-07 21:00:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 29 {CATALOG AGESFull.cat} 2010-May-07 21:00:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 32 {IF LSTSLEW(AGESVC1B_p2_017) < 120433 THEN} 2010-May-07 21:00:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 33 {FIXEDDRIFT az=327.44 alfaangle=46.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_017 ra=122900.00 dec=83600.00} 2010-May-07 21:00:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 36 {ENDIF} 2010-May-07 21:00:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 39 {IF LSTSLEW(AGESVC2B_p2_019) < 122933 THEN} 2010-May-07 21:00:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 40 {FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_019 ra=122900.00 dec=83300.00} 2010-May-07 21:00:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 43 {ENDIF} 2010-May-07 21:00:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 46 {IF LSTSLEW(AGESVC1B_p2_021) < 125433 THEN} 2010-May-07 21:00:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 47 {FIXEDDRIFT az=32.30 alfaangle=-8.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_021 ra=122900.00 dec=83000.00} 2010-May-07 21:00:32 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 50 {ENDIF} 2010-May-07 21:00:32 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-May-07 21:00:32 LOG4 exec_msg: From OBSERVER: run_command_file 100507.cmd 1 1 25 2010-May-07 21:00:32 LOG4 run_command_file: Calling 'run_command_file 100507.cmd 1 1 25' 2010-May-07 21:00:32 BEGIN begin_task: Starting task 'running command file '100507.cmd'' 2010-May-07 21:00:32 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-May-07 21:00:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100507.cmd' ...} 2010-May-07 21:00:32 NOTE run_command_file: Starting execution of command file '100507.cmd' from line 1 2010-May-07 21:00:32 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima31.conf' 2010-May-07 21:00:32 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-May-07 21:00:32 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-07 21:00:32 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-May-07 21:00:32 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-May-07 21:00:33 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-May-07 21:00:34 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-07 21:00:34 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-May-07 21:00:34 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-May-07 21:00:34 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-May-07 21:00:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-May-07 21:00:34 INFO1 config_iflo: Selecting receiver ALFA 2010-May-07 21:00:34 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2010-May-07 21:00:34 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2010-May-07 21:00:34 START begin_task: Starting task 'selecting receiver ALFA' 2010-May-07 21:00:34 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-May-07 21:00:34 NOTE select_receiver: Starting to select receiver ALFA 2010-May-07 21:00:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-May-07 21:00:34 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-May-07 21:00:34 LOG3 vw_send: To DATATAKING: acvlbical off 2010-May-07 21:00:34 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-May-07 21:00:34 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-May-07 21:00:34 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-May-07 21:00:34 INFO2 finish_task: DONE finished selecting: receiver ALFA 2010-May-07 21:00:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 21:00:35 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-May-07 21:00:35 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-May-07 21:00:35 START begin_task: Starting task 'waiting for receiver ALFA' 2010-May-07 21:00:35 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-May-07 21:00:35 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2010-May-07 21:00:35 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-May-07 21:00:35 INFO1 config_iflo: Configuring rest of the IF/LO path 2010-May-07 21:00:35 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2010-May-07 21:00:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-07 21:00:35 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-07 21:00:35 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-07 21:00:35 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-May-07 21:00:35 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-07 21:00:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-07 21:00:35 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-May-07 21:00:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-07 21:00:35 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-07 21:00:35 LOG3 vw_send: To DATATAKING: alfafb 1 2010-May-07 21:00:35 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2010-May-07 21:00:35 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-May-07 21:00:35 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-May-07 21:00:35 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2010-May-07 21:00:35 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2010-May-07 21:00:35 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2010-May-07 21:00:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-May-07 21:00:35 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2010-May-07 21:00:35 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2010-May-07 21:00:35 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-May-07 21:00:35 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-May-07 21:00:35 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-May-07 21:00:35 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-May-07 21:00:35 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-May-07 21:00:35 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2010-May-07 21:00:35 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2010-May-07 21:00:35 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2010-May-07 21:00:35 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2010-May-07 21:00:35 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-May-07 21:00:35 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2010-May-07 21:00:35 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-May-07 21:00:35 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-May-07 21:00:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:00:35 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-May-07 21:00:35 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2010-May-07 21:00:35 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-May-07 21:00:35 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2010-May-07 21:00:35 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2010-May-07 21:00:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-May-07 21:00:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:00:35 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-May-07 21:00:35 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-May-07 21:00:35 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-May-07 21:00:35 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-May-07 21:00:35 LOG4 got_cormsg: From DATATAKING: alfafb 1 2010-May-07 21:00:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2010-May-07 21:00:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2010-May-07 21:00:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2010-May-07 21:00:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2010-May-07 21:00:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-May-07 21:00:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2010-May-07 21:00:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2010-May-07 21:00:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2010-May-07 21:00:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2010-May-07 21:00:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2010-May-07 21:00:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2010-May-07 21:00:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-May-07 21:00:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2010-May-07 21:00:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-May-07 21:00:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:00:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-May-07 21:00:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2010-May-07 21:00:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2010-May-07 21:00:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2010-May-07 21:00:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:00:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:50 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-07 21:00:50 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-May-07 21:00:50 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-May-07 21:00:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-May-07 21:00:50 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-May-07 21:00:50 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-May-07 21:00:50 DONE finish_task: DONE finished configuration: IF/LO path 2010-May-07 21:00:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-07 21:00:50 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-May-07 21:00:50 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-May-07 21:00:50 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-May-07 21:00:50 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-May-07 21:00:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-May-07 21:00:51 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-May-07 21:00:51 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-May-07 21:00:51 START begin_task: Starting task 'selecting calibration port' 2010-May-07 21:00:51 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-May-07 21:00:51 LOG3 vw_send: To DATATAKING: calport 3 2010-May-07 21:00:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-May-07 21:00:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:00:51 START begin_task: Starting task 'waiting on calport' 2010-May-07 21:00:51 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2010-May-07 21:00:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:51 LOG4 got_cormsg: From DATATAKING: calport 3 2010-May-07 21:00:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:00:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:51 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-07 21:00:51 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-May-07 21:00:51 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2010-May-07 21:00:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-May-07 21:00:51 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-May-07 21:00:51 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-May-07 21:00:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-07 21:00:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-07 21:00:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-07 21:00:51 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-May-07 21:00:51 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-07 21:00:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:00:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-07 21:00:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-07 21:00:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-07 21:00:51 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-May-07 21:00:51 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-May-07 21:00:51 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-May-07 21:00:51 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-May-07 21:00:51 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-May-07 21:00:51 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-May-07 21:00:51 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-May-07 21:00:51 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-May-07 21:00:51 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-May-07 21:00:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-07 21:00:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-07 21:00:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-07 21:00:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-07 21:00:51 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-May-07 21:00:51 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-May-07 21:00:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-07 21:00:51 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-May-07 21:00:51 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-07 21:00:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-07 21:00:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-07 21:00:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-07 21:00:51 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-May-07 21:00:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-07 21:00:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-07 21:00:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-07 21:00:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-07 21:00:52 STOP finish_task: Finishing task 'configuring WAPPs' 2010-May-07 21:00:52 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-May-07 21:00:52 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-May-07 21:00:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-07 21:00:52 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-May-07 21:00:52 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-May-07 21:00:52 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2010-May-07 21:00:52 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2010-May-07 21:00:52 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2010-May-07 21:00:52 LOG3 is_if_valid: Current source data: rising 287.1 25.5 26 - - 171 4.6 2010-May-07 21:00:52 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2010-May-07 21:00:52 INFO5 is_if_valid: Condition parsed as: 0 2010-May-07 21:00:52 INFO1 is_if_valid: Skipping line 'IF isup(galfasrc) then' 2010-May-07 21:00:52 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2010-May-07 21:00:52 INFO1 run_command_line: Skipping line 'GOTO galfasrc' in non-true conditional branch 2010-May-07 21:00:52 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2010-May-07 21:00:52 ERROR read_source: ERROR source 'galfasrc2' does not exist in catalog '/share/obs4/usr/a2048/togs_ages.cat'! 2010-May-07 21:00:52 ERROR is_if_valid: ERROR failed to find source 'galfasrc2' for function 'ISUP(galfasrc2)'! 2010-May-07 21:00:52 LOG1 task_failed: Task 'running command file '100507.cmd'' failed! 2010-May-07 21:00:52 LOG5 task_failed: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-May-07 21:00:52 ALERT run_command_file: Stopping command file processing at line 9! 2010-May-07 21:00:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-May-07 21:00:52 STOP finish_task: Finishing task 'running command file '100507.cmd'' 2010-May-07 21:00:52 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 1 failed 2010-May-07 21:00:52 ERROR finish_task: ERROR failed running: command file '100507.cmd' 2010-May-07 21:00:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-May-07 21:00:52 END end_task: Finishing task 'running command file '100507.cmd'' with status 'FAILED' 2010-May-07 21:00:52 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 1 failed 2010-May-07 21:00:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-07 21:00:53 NOTE WAPPDATA-new_file: New FITS file: wapp.20100507.a2048.0000.fits 2010-May-07 21:00:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-May-07 21:00:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-May-07 21:00:53 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20100507.a2048.0000.fits} 2010-May-07 21:00:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-07 21:02:17 INFO4 CIMA-load_command_file: Loaded command file 'command_galfacurpos.cmd' 2010-May-07 21:02:19 INFO1 CIMA-run_command_file: Transferring command file 'command_galfacurpos.cmd' to executive ... 2010-May-07 21:02:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 7 {LOAD togs_ages.conf} 2010-May-07 21:02:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 8 {TRACKCURPOS} 2010-May-07 21:02:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 9 {ALFAANGLE 19} 2010-May-07 21:02:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2010-May-07 21:02:19 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-May-07 21:02:19 LOG4 exec_msg: From OBSERVER: run_command_file command_galfacurpos.cmd 1 1 4 2010-May-07 21:02:19 LOG4 run_command_file: Calling 'run_command_file command_galfacurpos.cmd 1 1 4' 2010-May-07 21:02:19 BEGIN begin_task: Starting task 'running command file 'command_galfacurpos.cmd'' 2010-May-07 21:02:19 LOG5 begin_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2010-May-07 21:02:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfacurpos.cmd' ...} 2010-May-07 21:02:19 NOTE run_command_file: Starting execution of command file 'command_galfacurpos.cmd' from line 1 2010-May-07 21:02:19 COMMAND run_command_line: EXECUTING command 7: 'LOAD togs_ages.conf' 2010-May-07 21:02:19 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-May-07 21:02:30 ERROR execute_load: ERROR can't use the IF/LO file 'togs_ages.conf'! 2010-May-07 21:02:30 LOG1 task_failed: Task 'running command file 'command_galfacurpos.cmd'' failed! 2010-May-07 21:02:30 LOG5 task_failed: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2010-May-07 21:02:30 ALERT run_command_file: Stopping command file processing at line 7! 2010-May-07 21:02:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-May-07 21:02:30 STOP finish_task: Finishing task 'running command file 'command_galfacurpos.cmd'' 2010-May-07 21:02:30 LOG5 finish_task: Level: (1) ID = <10014> Status = 0 0 0 1 failed 2010-May-07 21:02:30 ERROR finish_task: ERROR failed running: command file 'command_galfacurpos.cmd' 2010-May-07 21:02:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-May-07 21:02:30 END end_task: Finishing task 'running command file 'command_galfacurpos.cmd'' with status 'FAILED' 2010-May-07 21:02:30 LOG5 end_task: Level: (1) ID = <10014> Status = 0 0 0 1 failed 2010-May-07 21:03:09 INFO4 CIMA-load_command_file: Loaded command file 'command_galfacurpos_cima31.cmd' 2010-May-07 21:03:12 INFO1 CIMA-run_command_file: Transferring command file 'command_galfacurpos_cima31.cmd' to executive ... 2010-May-07 21:03:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 7 {LOAD togs_cima31.conf} 2010-May-07 21:03:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 8 {TRACKCURPOS} 2010-May-07 21:03:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 9 {ALFAANGLE 19} 2010-May-07 21:03:12 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2010-May-07 21:03:12 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-May-07 21:03:12 LOG4 exec_msg: From OBSERVER: run_command_file command_galfacurpos_cima31.cmd 1 1 4 2010-May-07 21:03:12 LOG4 run_command_file: Calling 'run_command_file command_galfacurpos_cima31.cmd 1 1 4' 2010-May-07 21:03:12 BEGIN begin_task: Starting task 'running command file 'command_galfacurpos_cima31.cmd'' 2010-May-07 21:03:12 LOG5 begin_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2010-May-07 21:03:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfacurpos_cima31.cmd' ...} 2010-May-07 21:03:12 NOTE run_command_file: Starting execution of command file 'command_galfacurpos_cima31.cmd' from line 1 2010-May-07 21:03:12 COMMAND run_command_line: EXECUTING command 7: 'LOAD togs_cima31.conf' 2010-May-07 21:03:12 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-May-07 21:03:12 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-07 21:03:12 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-May-07 21:03:13 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-May-07 21:03:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-May-07 21:03:14 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-07 21:03:14 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-May-07 21:03:15 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2010-May-07 21:03:15 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-May-07 21:03:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-May-07 21:03:15 LOG1 config_iflo: Receiver ALFA already selected 2010-May-07 21:03:15 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-07 21:03:15 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-07 21:03:15 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-07 21:03:15 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2010-May-07 21:03:15 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-07 21:03:15 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-07 21:03:15 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2010-May-07 21:03:15 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-07 21:03:15 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-07 21:03:15 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-May-07 21:03:15 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-May-07 21:03:15 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-May-07 21:03:15 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-May-07 21:03:15 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-May-07 21:03:15 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-May-07 21:03:15 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-May-07 21:03:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-May-07 21:03:15 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-May-07 21:03:15 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-May-07 21:03:15 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-May-07 21:03:15 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-May-07 21:03:15 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-May-07 21:03:15 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-May-07 21:03:15 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-May-07 21:03:15 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-May-07 21:03:15 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-May-07 21:03:15 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-May-07 21:03:15 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-May-07 21:03:15 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2010-May-07 21:03:15 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-May-07 21:03:15 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-May-07 21:03:15 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-May-07 21:03:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:03:15 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-May-07 21:03:15 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-May-07 21:03:15 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-May-07 21:03:15 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-May-07 21:03:15 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-May-07 21:03:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-May-07 21:03:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:03:15 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-May-07 21:03:15 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2010-May-07 21:03:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-May-07 21:03:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:03:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:03:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:03:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:03:15 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-07 21:03:15 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-May-07 21:03:15 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2010-May-07 21:03:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-May-07 21:03:15 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-May-07 21:03:15 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2010-May-07 21:03:15 DONE finish_task: DONE finished configuration: IF/LO path 2010-May-07 21:03:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-07 21:03:15 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-May-07 21:03:15 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2010-May-07 21:03:15 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-May-07 21:03:15 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-May-07 21:03:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-May-07 21:03:15 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-May-07 21:03:15 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-May-07 21:03:15 START begin_task: Starting task 'selecting calibration port' 2010-May-07 21:03:15 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-May-07 21:03:15 LOG3 vw_send: To DATATAKING: calport 3 2010-May-07 21:03:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-May-07 21:03:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:03:15 START begin_task: Starting task 'waiting on calport' 2010-May-07 21:03:15 LOG5 begin_task: Level: (4) ID = <10021> Status = 0 0 0 0 ok 2010-May-07 21:03:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:03:15 LOG4 got_cormsg: From DATATAKING: calport 3 2010-May-07 21:03:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:03:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:03:16 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-07 21:03:16 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-May-07 21:03:16 LOG5 end_task: Level: (4) ID = <10021> Status = 0 0 0 0 ok 2010-May-07 21:03:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-May-07 21:03:16 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-May-07 21:03:16 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-May-07 21:03:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-07 21:03:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-07 21:03:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-07 21:03:16 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2010-May-07 21:03:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:03:16 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-07 21:03:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-07 21:03:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-07 21:03:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-07 21:03:16 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2010-May-07 21:03:16 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-May-07 21:03:16 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-May-07 21:03:16 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-May-07 21:03:16 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-May-07 21:03:16 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-May-07 21:03:16 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-May-07 21:03:16 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-May-07 21:03:16 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-May-07 21:03:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-07 21:03:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-07 21:03:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-07 21:03:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-07 21:03:16 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-May-07 21:03:16 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-May-07 21:03:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-07 21:03:16 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2010-May-07 21:03:16 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-07 21:03:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-07 21:03:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-07 21:03:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-07 21:03:16 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2010-May-07 21:03:16 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-May-07 21:03:16 STOP finish_task: Finishing task 'configuring WAPPs' 2010-May-07 21:03:16 LOG5 finish_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-May-07 21:03:16 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-May-07 21:03:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-07 21:03:16 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-May-07 21:03:16 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-May-07 21:03:16 COMMAND run_command_line: EXECUTING command 8: 'TRACKCURPOS' 2010-May-07 21:03:16 BEGIN begin_task: Starting task 'tracking current position' 2010-May-07 21:03:16 LOG5 begin_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-May-07 21:03:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2010-May-07 21:03:16 INFO1 track_current_pos: Starting to track the current commanded position RA = 11:43:55.3 and Dec = +09:51:25.1 2010-May-07 21:03:16 LOG3 track_source: Calling 'track_source Cur-pos 114355.3 095125.1 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2010-May-07 21:03:16 START begin_task: Starting task 'sending tracking commands' 2010-May-07 21:03:16 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-May-07 21:03:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2010-May-07 21:03:16 INFO1 track_source: Starting to track Cur-pos 2010-May-07 21:03:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2010-May-07 21:03:16 LOG3 vw_send: To DATATAKING: set ra 114355.3 2010-May-07 21:03:16 LOG3 vw_send: To DATATAKING: set dec 095125.1 2010-May-07 21:03:16 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-07 21:03:16 LOG3 vw_send: To DATATAKING: pnt tr 114355.3 095125.1 -CJ 2010-May-07 21:03:17 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-May-07 21:03:17 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-07 21:03:17 LOG5 finish_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-May-07 21:03:17 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-07 21:03:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 21:03:17 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-07 21:03:17 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-May-07 21:03:17 START begin_task: Starting task 'waiting on telescope' 2010-May-07 21:03:17 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2010-May-07 21:03:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-07 21:03:17 LOG3 waittrk: Start waittrk 5 2010-May-07 21:03:17 START begin_task: Starting task 'waiting on telescope movement' 2010-May-07 21:03:17 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2010-May-07 21:03:17 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-May-07 21:03:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2010-May-07 21:03:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-May-07 21:03:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-May-07 21:03:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-07 21:03:17 LOG4 got_cormsg: From DATATAKING: set ra 114355.3 2010-May-07 21:03:17 LOG4 got_cormsg: From DATATAKING: set dec 095125.1 2010-May-07 21:03:17 LOG4 got_cormsg: From DATATAKING: vw% 114355.3 2010-May-07 21:03:17 LOG4 got_cormsg: From DATATAKING: vw% 095125.1 2010-May-07 21:03:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:03:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-07 21:03:17 LOG4 got_cormsg: From DATATAKING: pnt tr 114355.3 095125.1 -CJ 2010-May-07 21:03:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-May-07 21:03:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-07 21:03:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:03:22 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-07 21:03:22 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2010-May-07 21:03:22 START begin_task: Starting task 'waiting on telescope on source' 2010-May-07 21:03:22 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2010-May-07 21:03:32 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-07 21:03:32 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2010-May-07 21:03:32 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-07 21:03:32 INFO2 waittrk: Now tracking Cur-pos 2010-May-07 21:03:32 LOG4 waittrk: Current telescope position: Az = 351.53 ZA = 8.60 2010-May-07 21:03:32 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-07 21:03:32 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2010-May-07 21:03:32 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-07 21:03:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 21:03:32 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-07 21:03:32 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2010-May-07 21:03:32 STOP finish_task: Finishing task 'tracking current position' 2010-May-07 21:03:32 LOG5 finish_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-May-07 21:03:32 DONE finish_task: DONE finished tracking: current position 2010-May-07 21:03:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-07 21:03:32 END end_task: Finishing task 'tracking current position' with status 'OK' 2010-May-07 21:03:32 LOG5 end_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-May-07 21:03:32 COMMAND run_command_line: EXECUTING command 9: 'ALFAANGLE 19' 2010-May-07 21:03:32 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2010-May-07 21:03:32 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-May-07 21:03:32 LOG5 begin_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-May-07 21:03:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-May-07 21:03:32 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-May-07 21:03:32 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-May-07 21:03:32 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-May-07 21:03:32 START begin_task: Starting task 'waiting on ALFA rotation' 2010-May-07 21:03:32 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-May-07 21:03:48 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-May-07 21:03:48 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-May-07 21:03:48 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-May-07 21:03:48 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-May-07 21:03:48 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-May-07 21:03:48 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-May-07 21:03:48 LOG5 finish_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-May-07 21:03:48 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-May-07 21:03:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-07 21:03:48 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-May-07 21:03:48 LOG5 end_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-May-07 21:03:48 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2010-May-07 21:03:48 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2010-May-07 21:03:56 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-07 21:03:56 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2010-May-07 21:03:56 BEGIN begin_task: Starting task 'smart frequency switching' 2010-May-07 21:03:56 LOG5 begin_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2010-May-07 21:03:56 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2010-May-07 21:03:56 INFO1 smartfreq: Starting pattern: Smart frequency switching 2010-May-07 21:03:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2010-May-07 21:03:56 START begin_task: Starting task 'selecting calibration type' 2010-May-07 21:03:56 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2010-May-07 21:03:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-07 21:03:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-07 21:03:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:03:57 START begin_task: Starting task 'waiting on setcal' 2010-May-07 21:03:57 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2010-May-07 21:03:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-07 21:03:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:03:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:03:57 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-07 21:03:57 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-07 21:03:57 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2010-May-07 21:03:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-07 21:03:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-07 21:03:57 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-07 21:03:57 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-07 21:03:57 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2010-May-07 21:03:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:03:57 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-07 21:03:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-07 21:03:57 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2010-May-07 21:03:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-07 21:03:57 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-07 21:03:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-07 21:03:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-07 21:03:57 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-07 21:03:57 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2010-May-07 21:03:57 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-07 21:03:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-07 21:03:57 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2010-May-07 21:03:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-07 21:03:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-07 21:03:57 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-07 21:03:57 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2010-May-07 21:03:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-07 21:03:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-07 21:03:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-07 21:03:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-07 21:03:57 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20100507.a2048.0000.fits' is empty! 2010-May-07 21:03:57 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2010-May-07 21:03:57 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-May-07 21:03:57 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-May-07 21:03:57 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-07 21:03:57 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-07 21:03:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-07 21:03:57 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2010-May-07 21:03:57 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-07 21:03:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-07 21:03:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-07 21:03:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-07 21:03:57 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2010-May-07 21:03:57 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-May-07 21:03:57 START begin_task: Starting task 'adjusting WAPP power' 2010-May-07 21:03:57 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2010-May-07 21:03:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-May-07 21:03:57 INFO2 adjust_power: Starting to adjust WAPP power 2010-May-07 21:03:57 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-May-07 21:03:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-May-07 21:03:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:03:57 START begin_task: Starting task 'waiting on adjpwrif2' 2010-May-07 21:03:57 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2010-May-07 21:03:57 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-May-07 21:03:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:03:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-07 21:04:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:04:00 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-07 21:04:00 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-May-07 21:04:00 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2010-May-07 21:04:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-May-07 21:04:01 START begin_task: Starting task 'adjusting WAPP power' 2010-May-07 21:04:01 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2010-May-07 21:04:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-07 21:04:01 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-May-07 21:04:01 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-May-07 21:04:01 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-May-07 21:04:01 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-May-07 21:04:01 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-May-07 21:04:01 LOG5 begin_task: Level: (5) ID = <10040> Status = 0 0 0 0 ok 2010-May-07 21:04:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:04:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-May-07 21:04:01 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-May-07 21:04:01 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 5 dB 2010-May-07 21:04:01 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 4 3 dB 2010-May-07 21:04:01 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-May-07 21:04:01 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-May-07 21:04:01 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-May-07 21:04:01 LOG5 end_task: Level: (5) ID = <10040> Status = 0 0 0 0 ok 2010-May-07 21:04:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.962 0.971 ALFA beam 1: 1.034 1.056 2010-May-07 21:04:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.949 0.938 ALFA beam 3: 0.924 1.000 2010-May-07 21:04:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.908 0.899 ALFA beam 5: 0.962 1.009 2010-May-07 21:04:01 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.939 0.899 ALFA beam 7: 1.028 1.049 2010-May-07 21:04:01 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-07 21:04:01 LOG5 finish_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2010-May-07 21:04:01 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-May-07 21:04:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 21:04:01 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-07 21:04:01 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2010-May-07 21:04:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-07 21:04:01 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-07 21:04:01 LOG5 finish_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2010-May-07 21:04:01 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-May-07 21:04:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 21:04:01 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-07 21:04:01 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2010-May-07 21:04:01 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2010-May-07 21:04:01 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-May-07 21:04:01 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-May-07 21:04:01 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:04:01 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35011 J 2010-May-07 21:04:01 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:04:01 LOG2 antvel: Parameters to Doppler: Topocentric 90241 2010 127 0.0 2010-May-07 21:04:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:04:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-May-07 21:04:01 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-May-07 21:04:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:04:01 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:04:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-May-07 21:04:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:04:01 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2010-May-07 21:04:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:04:01 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2010-May-07 21:04:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2010-May-07 21:04:02 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.667321 2010.3501103062335 18.999933 2010-May-07 21:04:02 LOG4 log_alfabeam: ALFABEAM 0 11.732027777777729 9.856972222222229 2010-May-07 21:04:02 LOG4 log_alfabeam: ALFABEAM 1 11.730004997531633 9.958810219874156 2010-May-07 21:04:02 LOG4 log_alfabeam: ALFABEAM 2 11.725955959809159 9.881346425837670 2010-May-07 21:04:02 LOG4 log_alfabeam: ALFABEAM 3 11.727934185585191 9.779295514675013 2010-May-07 21:04:02 LOG4 log_alfabeam: ALFABEAM 4 11.734077250357245 9.755217556986091 2010-May-07 21:04:02 LOG4 log_alfabeam: ALFABEAM 5 11.738138019205623 9.833511231328066 2010-May-07 21:04:02 LOG4 log_alfabeam: ALFABEAM 6 11.736044113100544 9.935046115054124 2010-May-07 21:04:02 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700095 2010-May-07 21:04:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:04:02 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2010-May-07 21:04:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:04:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-May-07 21:04:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:04:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:04:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:04:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-May-07 21:04:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3843.00 2010-May-07 21:04:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:04:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:04:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:04:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:04:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:04:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:04:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:04:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:04:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:04:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:04:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:04:13 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2010-May-07 21:04:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:04:13 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2010-May-07 21:04:13 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2010-May-07 21:04:13 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-May-07 21:04:13 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-May-07 21:04:13 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:04:13 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35011 J 2010-May-07 21:04:13 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:04:13 LOG2 antvel: Parameters to Doppler: Topocentric 90253 2010 127 0.0 2010-May-07 21:04:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:04:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-May-07 21:04:13 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-May-07 21:04:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:04:13 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:04:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-May-07 21:04:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:04:13 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2010-May-07 21:04:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:04:13 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2010-May-07 21:04:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2010-May-07 21:04:13 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.670664 2010.3501106864908 18.999933 2010-May-07 21:04:13 LOG4 log_alfabeam: ALFABEAM 0 11.732027777777743 9.856972222222229 2010-May-07 21:04:13 LOG4 log_alfabeam: ALFABEAM 1 11.730042955104635 9.958973148976700 2010-May-07 21:04:13 LOG4 log_alfabeam: ALFABEAM 2 11.725965134253919 9.881839986720463 2010-May-07 21:04:13 LOG4 log_alfabeam: ALFABEAM 3 11.727905312129598 9.779629624469928 2010-May-07 21:04:13 LOG4 log_alfabeam: ALFABEAM 4 11.734039365258900 9.755052513962806 2010-May-07 21:04:13 LOG4 log_alfabeam: ALFABEAM 5 11.738129203817868 9.833015182336451 2010-May-07 21:04:13 LOG4 log_alfabeam: ALFABEAM 6 11.736073090241339 9.934718567294070 2010-May-07 21:04:13 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700096 2010-May-07 21:04:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:04:14 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2010-May-07 21:04:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:04:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-May-07 21:04:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:04:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:04:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:04:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-May-07 21:04:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3855.00 2010-May-07 21:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:04:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:04:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:04:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:04:25 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2010-May-07 21:04:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:04:25 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2010-May-07 21:04:25 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2010-May-07 21:04:25 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-May-07 21:04:25 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-May-07 21:04:25 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:04:25 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35011 J 2010-May-07 21:04:25 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:04:25 LOG2 antvel: Parameters to Doppler: Topocentric 90265 2010 127 0.0 2010-May-07 21:04:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:04:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-May-07 21:04:25 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-May-07 21:04:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:04:25 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:04:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-May-07 21:04:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:04:25 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2010-May-07 21:04:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:04:25 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-May-07 21:04:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2010-May-07 21:04:25 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.674006 2010.3501110667478 18.999933 2010-May-07 21:04:25 LOG4 log_alfabeam: ALFABEAM 0 11.732027777777768 9.856972222222234 2010-May-07 21:04:25 LOG4 log_alfabeam: ALFABEAM 1 11.730081012751045 9.959133155788413 2010-May-07 21:04:25 LOG4 log_alfabeam: ALFABEAM 2 11.725974501819149 9.882333301057830 2010-May-07 21:04:25 LOG4 log_alfabeam: ALFABEAM 3 11.727876534248775 9.779966430194515 2010-May-07 21:04:25 LOG4 log_alfabeam: ALFABEAM 4 11.734001378615366 9.754890380930213 2010-May-07 21:04:25 LOG4 log_alfabeam: ALFABEAM 5 11.738120193805461 9.832519316098407 2010-May-07 21:04:25 LOG4 log_alfabeam: ALFABEAM 6 11.736101976810360 9.934388313075656 2010-May-07 21:04:25 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700097 2010-May-07 21:04:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:04:26 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2010-May-07 21:04:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:04:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-May-07 21:04:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:04:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:04:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:04:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-May-07 21:04:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3867.00 2010-May-07 21:04:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:04:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:04:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:04:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:04:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:04:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:04:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:04:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:04:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:04:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:04:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:04:37 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2010-May-07 21:04:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:04:37 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-May-07 21:04:37 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2010-May-07 21:04:37 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-May-07 21:04:37 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-May-07 21:04:37 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:04:37 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35011 J 2010-May-07 21:04:37 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:04:37 LOG2 antvel: Parameters to Doppler: Topocentric 90277 2010 127 0.0 2010-May-07 21:04:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:04:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-May-07 21:04:37 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-May-07 21:04:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:04:37 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:04:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-May-07 21:04:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:04:37 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2010-May-07 21:04:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:04:37 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2010-May-07 21:04:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2010-May-07 21:04:37 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.677349 2010.3501114470048 18.999933 2010-May-07 21:04:37 LOG4 log_alfabeam: ALFABEAM 0 11.732027777777752 9.856972222222227 2010-May-07 21:04:37 LOG4 log_alfabeam: ALFABEAM 1 11.730119189991459 9.959290309146120 2010-May-07 21:04:37 LOG4 log_alfabeam: ALFABEAM 2 11.725984067966376 9.882826615886470 2010-May-07 21:04:37 LOG4 log_alfabeam: ALFABEAM 3 11.727847837857778 9.780306111549130 2010-May-07 21:04:37 LOG4 log_alfabeam: ALFABEAM 4 11.733963270929245 9.754731088138765 2010-May-07 21:04:37 LOG4 log_alfabeam: ALFABEAM 5 11.738110983846504 9.832023384290995 2010-May-07 21:04:37 LOG4 log_alfabeam: ALFABEAM 6 11.736130786956355 9.934055175322397 2010-May-07 21:04:37 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700098 2010-May-07 21:04:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:04:38 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2010-May-07 21:04:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:04:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-May-07 21:04:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:04:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:04:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:04:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-May-07 21:04:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3879.00 2010-May-07 21:04:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:04:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:04:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:04:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:04:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:04:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:04:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:04:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:04:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:04:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:04:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:04:49 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2010-May-07 21:04:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:04:49 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2010-May-07 21:04:49 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2010-May-07 21:04:49 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-May-07 21:04:49 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-May-07 21:04:49 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:04:49 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35011 J 2010-May-07 21:04:49 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:04:49 LOG2 antvel: Parameters to Doppler: Topocentric 90289 2010 127 0.0 2010-May-07 21:04:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:04:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-May-07 21:04:49 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-May-07 21:04:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:04:49 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:04:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-May-07 21:04:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:04:49 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2010-May-07 21:04:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:04:49 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2010-May-07 21:04:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2010-May-07 21:04:49 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.680691 2010.3501118272618 18.999933 2010-May-07 21:04:49 LOG4 log_alfabeam: ALFABEAM 0 11.732027777777750 9.856972222222231 2010-May-07 21:04:49 LOG4 log_alfabeam: ALFABEAM 1 11.730157460689123 9.959444488852613 2010-May-07 21:04:49 LOG4 log_alfabeam: ALFABEAM 2 11.725993826771621 9.883319587770687 2010-May-07 21:04:49 LOG4 log_alfabeam: ALFABEAM 3 11.727819243246252 9.780648442585758 2010-May-07 21:04:49 LOG4 log_alfabeam: ALFABEAM 4 11.733925068277177 9.754574757431891 2010-May-07 21:04:49 LOG4 log_alfabeam: ALFABEAM 5 11.738101579577764 9.831527732182346 2010-May-07 21:04:49 LOG4 log_alfabeam: ALFABEAM 6 11.736159500318372 9.933719374768298 2010-May-07 21:04:49 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700099 2010-May-07 21:04:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:04:50 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2010-May-07 21:04:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:04:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-May-07 21:04:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:04:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:04:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:04:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-May-07 21:04:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3891.00 2010-May-07 21:04:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:04:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:04:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:04:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:04:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:04:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:04:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:04:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:04:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:05:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:05:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:05:01 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2010-May-07 21:05:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:05:01 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2010-May-07 21:05:01 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2010-May-07 21:05:01 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-May-07 21:05:01 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-May-07 21:05:01 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:05:01 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35011 J 2010-May-07 21:05:01 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:05:01 LOG2 antvel: Parameters to Doppler: Topocentric 90301 2010 127 0.0 2010-May-07 21:05:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:05:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-May-07 21:05:01 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-May-07 21:05:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:05:01 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:05:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-May-07 21:05:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:05:01 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2010-May-07 21:05:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:05:01 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-May-07 21:05:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2010-May-07 21:05:01 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.684034 2010.3501122075188 18.999933 2010-May-07 21:05:01 LOG4 log_alfabeam: ALFABEAM 0 11.732027777777764 9.856972222222229 2010-May-07 21:05:01 LOG4 log_alfabeam: ALFABEAM 1 11.730195844406820 9.959595761734695 2010-May-07 21:05:01 LOG4 log_alfabeam: ALFABEAM 2 11.726003783816983 9.883812463289633 2010-May-07 21:05:01 LOG4 log_alfabeam: ALFABEAM 3 11.727790736408966 9.780993604559955 2010-May-07 21:05:01 LOG4 log_alfabeam: ALFABEAM 4 11.733886751118675 9.754421321068305 2010-May-07 21:05:01 LOG4 log_alfabeam: ALFABEAM 5 11.738091975555324 9.831032111881976 2010-May-07 21:05:01 LOG4 log_alfabeam: ALFABEAM 6 11.736188130967536 9.933380732764116 2010-May-07 21:05:01 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700100 2010-May-07 21:05:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:05:02 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2010-May-07 21:05:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:05:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-May-07 21:05:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:05:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:05:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:05:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-May-07 21:05:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3903.00 2010-May-07 21:05:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:05:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:05:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:05:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:05:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:05:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:05:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:05:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:05:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:05:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:05:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:05:13 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2010-May-07 21:05:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:05:13 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-May-07 21:05:13 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2010-May-07 21:05:13 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-May-07 21:05:13 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-May-07 21:05:13 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:05:13 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35011 J 2010-May-07 21:05:13 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:05:13 LOG2 antvel: Parameters to Doppler: Topocentric 90313 2010 127 0.0 2010-May-07 21:05:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:05:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-May-07 21:05:13 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-May-07 21:05:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:05:13 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:05:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-May-07 21:05:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:05:13 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2010-May-07 21:05:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:05:13 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-May-07 21:05:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2010-May-07 21:05:13 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.687376 2010.350112587776 18.999933 2010-May-07 21:05:13 LOG4 log_alfabeam: ALFABEAM 0 11.732027777777789 9.856972222222220 2010-May-07 21:05:13 LOG4 log_alfabeam: ALFABEAM 1 11.730234314801601 9.959744012623787 2010-May-07 21:05:13 LOG4 log_alfabeam: ALFABEAM 2 11.726013932830567 9.884304899063244 2010-May-07 21:05:13 LOG4 log_alfabeam: ALFABEAM 3 11.727762337488977 9.781341366506366 2010-May-07 21:05:13 LOG4 log_alfabeam: ALFABEAM 4 11.733848345739084 9.754270895889926 2010-May-07 21:05:13 LOG4 log_alfabeam: ALFABEAM 5 11.738082177766003 9.830536868730462 2010-May-07 21:05:13 LOG4 log_alfabeam: ALFABEAM 6 11.736216658679393 9.933039475072134 2010-May-07 21:05:13 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700101 2010-May-07 21:05:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:05:14 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2010-May-07 21:05:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:05:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-May-07 21:05:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:05:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:05:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:05:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-May-07 21:05:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3915.00 2010-May-07 21:05:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:05:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:05:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:05:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:05:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:05:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:05:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:05:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:05:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:05:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:05:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:05:25 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2010-May-07 21:05:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:05:25 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-May-07 21:05:25 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-May-07 21:05:25 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-07 21:05:25 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-07 21:05:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-07 21:05:25 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2010-May-07 21:05:25 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-07 21:05:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-07 21:05:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-07 21:05:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-07 21:05:25 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2010-May-07 21:05:25 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2010-May-07 21:05:25 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-May-07 21:05:25 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-May-07 21:05:25 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:05:25 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35011 J 2010-May-07 21:05:25 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:05:25 LOG2 antvel: Parameters to Doppler: Topocentric 90325 2010 127 0.0 2010-May-07 21:05:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:05:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-May-07 21:05:25 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-May-07 21:05:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:05:25 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:05:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-May-07 21:05:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:05:25 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2010-May-07 21:05:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:05:25 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-May-07 21:05:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2010-May-07 21:05:25 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.690719 2010.350112968033 18.999933 2010-May-07 21:05:25 LOG4 log_alfabeam: ALFABEAM 0 11.732027777777756 9.856972222222229 2010-May-07 21:05:25 LOG4 log_alfabeam: ALFABEAM 1 11.730272891475964 9.959889306342694 2010-May-07 21:05:25 LOG4 log_alfabeam: ALFABEAM 2 11.726024279513718 9.884797141188361 2010-May-07 21:05:25 LOG4 log_alfabeam: ALFABEAM 3 11.727734032561857 9.781691911204961 2010-May-07 21:05:25 LOG4 log_alfabeam: ALFABEAM 4 11.733809832557547 9.754123416157922 2010-May-07 21:05:25 LOG4 log_alfabeam: ALFABEAM 5 11.738072180645283 9.830041755295190 2010-May-07 21:05:25 LOG4 log_alfabeam: ALFABEAM 6 11.736245097446323 9.932695421501476 2010-May-07 21:05:25 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700102 2010-May-07 21:05:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:05:26 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2010-May-07 21:05:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:05:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-May-07 21:05:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:05:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:05:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:05:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-May-07 21:05:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3927.00 2010-May-07 21:05:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:05:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:05:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:05:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:05:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:05:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:05:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:05:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:05:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:05:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:05:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:05:37 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2010-May-07 21:05:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:05:37 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-May-07 21:05:37 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2010-May-07 21:05:37 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-May-07 21:05:37 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-May-07 21:05:37 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:05:37 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35011 J 2010-May-07 21:05:37 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:05:37 LOG2 antvel: Parameters to Doppler: Topocentric 90337 2010 127 0.0 2010-May-07 21:05:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:05:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-May-07 21:05:37 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-May-07 21:05:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:05:37 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:05:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-May-07 21:05:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:05:37 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2010-May-07 21:05:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:05:37 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-May-07 21:05:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2010-May-07 21:05:37 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.694061 2010.3501133482901 18.999933 2010-May-07 21:05:37 LOG4 log_alfabeam: ALFABEAM 0 11.732027777777725 9.856972222222231 2010-May-07 21:05:37 LOG4 log_alfabeam: ALFABEAM 1 11.730311547894592 9.960031532875286 2010-May-07 21:05:37 LOG4 log_alfabeam: ALFABEAM 2 11.726034817246994 9.885288846548567 2010-May-07 21:05:37 LOG4 log_alfabeam: ALFABEAM 3 11.727705841610568 9.782045002759881 2010-May-07 21:05:37 LOG4 log_alfabeam: ALFABEAM 4 11.733771238054652 9.753978993587085 2010-May-07 21:05:37 LOG4 log_alfabeam: ALFABEAM 5 11.738061990530626 9.829547116780180 2010-May-07 21:05:37 LOG4 log_alfabeam: ALFABEAM 6 11.736273427194348 9.932348802762093 2010-May-07 21:05:37 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700103 2010-May-07 21:05:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:05:38 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-May-07 21:05:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:05:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-May-07 21:05:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:05:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:05:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:05:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-May-07 21:05:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3939.00 2010-May-07 21:05:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:05:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:05:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:05:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:05:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:05:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:05:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:05:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:05:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:05:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:05:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:05:49 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-May-07 21:05:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:05:49 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-May-07 21:05:49 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2010-May-07 21:05:49 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-May-07 21:05:49 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-May-07 21:05:49 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:05:49 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35011 J 2010-May-07 21:05:49 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:05:49 LOG2 antvel: Parameters to Doppler: Topocentric 90349 2010 127 0.0 2010-May-07 21:05:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:05:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-May-07 21:05:49 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-May-07 21:05:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:05:49 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:05:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-May-07 21:05:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:05:49 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2010-May-07 21:05:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:05:49 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-May-07 21:05:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2010-May-07 21:05:49 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.697404 2010.3501137285471 18.999933 2010-May-07 21:05:49 LOG4 log_alfabeam: ALFABEAM 0 11.732027777777743 9.856972222222229 2010-May-07 21:05:49 LOG4 log_alfabeam: ALFABEAM 1 11.730350303697540 9.960170755045958 2010-May-07 21:05:49 LOG4 log_alfabeam: ALFABEAM 2 11.726045551849584 9.885780260734764 2010-May-07 21:05:49 LOG4 log_alfabeam: ALFABEAM 3 11.727677750792424 9.782400825446251 2010-May-07 21:05:49 LOG4 log_alfabeam: ALFABEAM 4 11.733732542611158 9.753837564435438 2010-May-07 21:05:49 LOG4 log_alfabeam: ALFABEAM 5 11.738051601738283 9.829052706234723 2010-May-07 21:05:49 LOG4 log_alfabeam: ALFABEAM 6 11.736301661836121 9.931999437150951 2010-May-07 21:05:49 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700104 2010-May-07 21:05:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:05:50 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2010-May-07 21:05:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:05:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-May-07 21:05:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:05:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:05:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:05:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-May-07 21:05:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3951.00 2010-May-07 21:05:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:05:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:05:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:05:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:05:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:05:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:05:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:05:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:05:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:06:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:06:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:06:01 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2010-May-07 21:06:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:06:01 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-May-07 21:06:01 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2010-May-07 21:06:01 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-May-07 21:06:01 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-May-07 21:06:01 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:06:01 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35011 J 2010-May-07 21:06:01 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:06:01 LOG2 antvel: Parameters to Doppler: Topocentric 90361 2010 127 0.0 2010-May-07 21:06:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:06:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-May-07 21:06:01 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-May-07 21:06:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:06:01 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:06:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-May-07 21:06:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:06:01 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2010-May-07 21:06:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:06:01 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-May-07 21:06:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2010-May-07 21:06:01 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.700746 2010.3501141088041 18.999933 2010-May-07 21:06:01 LOG4 log_alfabeam: ALFABEAM 0 11.732027777777754 9.856972222222225 2010-May-07 21:06:01 LOG4 log_alfabeam: ALFABEAM 1 11.730389132171322 9.960306868106793 2010-May-07 21:06:01 LOG4 log_alfabeam: ALFABEAM 2 11.726056476354978 9.886271041103855 2010-May-07 21:06:01 LOG4 log_alfabeam: ALFABEAM 3 11.727649779916348 9.782759138534709 2010-May-07 21:06:01 LOG4 log_alfabeam: ALFABEAM 4 11.733693772888905 9.753699235173098 2010-May-07 21:06:01 LOG4 log_alfabeam: ALFABEAM 5 11.738041020955588 9.828558868515314 2010-May-07 21:06:01 LOG4 log_alfabeam: ALFABEAM 6 11.736329781461459 9.931647560235303 2010-May-07 21:06:01 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700105 2010-May-07 21:06:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:06:02 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2010-May-07 21:06:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:06:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-May-07 21:06:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:06:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:06:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:06:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-May-07 21:06:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3963.00 2010-May-07 21:06:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:06:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:06:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:06:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:06:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:06:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:06:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:06:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:06:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:06:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:06:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:06:13 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2010-May-07 21:06:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:06:13 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-May-07 21:06:13 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2010-May-07 21:06:13 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-May-07 21:06:13 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-May-07 21:06:13 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:06:13 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35011 J 2010-May-07 21:06:13 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:06:13 LOG2 antvel: Parameters to Doppler: Topocentric 90373 2010 127 0.0 2010-May-07 21:06:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:06:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-May-07 21:06:13 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-May-07 21:06:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:06:13 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:06:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-May-07 21:06:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:06:13 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2010-May-07 21:06:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:06:13 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-May-07 21:06:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2010-May-07 21:06:13 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.704088 2010.3501144890613 18.999933 2010-May-07 21:06:13 LOG4 log_alfabeam: ALFABEAM 0 11.732027777777752 9.856972222222220 2010-May-07 21:06:13 LOG4 log_alfabeam: ALFABEAM 1 11.730428041336671 9.960439893548580 2010-May-07 21:06:13 LOG4 log_alfabeam: ALFABEAM 2 11.726067593343886 9.886761286111021 2010-May-07 21:06:13 LOG4 log_alfabeam: ALFABEAM 3 11.727621923540550 9.783120019402968 2010-May-07 21:06:13 LOG4 log_alfabeam: ALFABEAM 4 11.733654920870308 9.753563984057541 2010-May-07 21:06:13 LOG4 log_alfabeam: ALFABEAM 5 11.738030245634249 9.828065504725682 2010-May-07 21:06:13 LOG4 log_alfabeam: ALFABEAM 6 11.736357791537785 9.931293095275965 2010-May-07 21:06:13 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700106 2010-May-07 21:06:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:06:14 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2010-May-07 21:06:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:06:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-May-07 21:06:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:06:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:06:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:06:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-May-07 21:06:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3975.00 2010-May-07 21:06:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:06:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:06:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:06:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:06:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:06:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:06:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:06:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:06:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:06:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:06:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:06:25 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2010-May-07 21:06:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:06:25 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-May-07 21:06:25 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2010-May-07 21:06:25 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-May-07 21:06:25 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-May-07 21:06:25 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:06:25 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35011 J 2010-May-07 21:06:25 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:06:25 LOG2 antvel: Parameters to Doppler: Topocentric 90385 2010 127 0.0 2010-May-07 21:06:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:06:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-May-07 21:06:25 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-May-07 21:06:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:06:25 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:06:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-May-07 21:06:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:06:25 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2010-May-07 21:06:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:06:25 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-May-07 21:06:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2010-May-07 21:06:25 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.707431 2010.3501148693183 18.999933 2010-May-07 21:06:25 LOG4 log_alfabeam: ALFABEAM 0 11.732027777777779 9.856972222222222 2010-May-07 21:06:25 LOG4 log_alfabeam: ALFABEAM 1 11.730467039279441 9.960569850019015 2010-May-07 21:06:25 LOG4 log_alfabeam: ALFABEAM 2 11.726078905569716 9.887251093618566 2010-May-07 21:06:25 LOG4 log_alfabeam: ALFABEAM 3 11.727594176332971 9.783483547689427 2010-May-07 21:06:25 LOG4 log_alfabeam: ALFABEAM 4 11.733615978471310 9.753431792182877 2010-May-07 21:06:25 LOG4 log_alfabeam: ALFABEAM 5 11.738019273050892 9.827572516514028 2010-May-07 21:06:25 LOG4 log_alfabeam: ALFABEAM 6 11.736385697426055 9.930935963252638 2010-May-07 21:06:25 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700107 2010-May-07 21:06:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:06:26 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2010-May-07 21:06:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:06:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-May-07 21:06:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:06:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:06:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:06:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-May-07 21:06:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3987.00 2010-May-07 21:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:06:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:06:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:06:37 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2010-May-07 21:06:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:06:37 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-May-07 21:06:37 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2010-May-07 21:06:37 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-May-07 21:06:37 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-May-07 21:06:37 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:06:37 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35012 J 2010-May-07 21:06:37 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:06:37 LOG2 antvel: Parameters to Doppler: Topocentric 90397 2010 127 0.0 2010-May-07 21:06:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:06:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-May-07 21:06:37 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-May-07 21:06:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:06:37 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:06:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-May-07 21:06:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:06:37 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2010-May-07 21:06:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:06:37 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-May-07 21:06:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2010-May-07 21:06:37 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.710773 2010.3501152495753 18.999933 2010-May-07 21:06:37 LOG4 log_alfabeam: ALFABEAM 0 11.732027777777725 9.856972222222227 2010-May-07 21:06:37 LOG4 log_alfabeam: ALFABEAM 1 11.730506099046501 9.960696640870299 2010-May-07 21:06:37 LOG4 log_alfabeam: ALFABEAM 2 11.726090405548662 9.887740122088310 2010-May-07 21:06:37 LOG4 log_alfabeam: ALFABEAM 3 11.727566557816887 9.783849475617680 2010-May-07 21:06:37 LOG4 log_alfabeam: ALFABEAM 4 11.733576972597531 9.753302757950840 2010-May-07 21:06:37 LOG4 log_alfabeam: ALFABEAM 5 11.738008110416075 9.827080247817406 2010-May-07 21:06:37 LOG4 log_alfabeam: ALFABEAM 6 11.736413479487295 9.930576406827468 2010-May-07 21:06:37 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700108 2010-May-07 21:06:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:06:38 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2010-May-07 21:06:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:06:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-May-07 21:06:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:06:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:06:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:06:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-May-07 21:06:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3999.00 2010-May-07 21:06:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:06:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:06:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:06:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:06:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:06:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:06:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:06:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:06:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:06:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:06:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:06:49 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2010-May-07 21:06:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:06:49 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-May-07 21:06:49 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2010-May-07 21:06:49 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-May-07 21:06:49 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-May-07 21:06:49 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-07 21:06:49 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-07 21:06:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-07 21:06:49 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2010-May-07 21:06:49 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-07 21:06:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-07 21:06:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-07 21:06:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-07 21:06:49 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2010-May-07 21:06:49 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-May-07 21:06:49 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2010-May-07 21:06:49 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-May-07 21:06:49 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-May-07 21:06:49 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:06:49 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35012 J 2010-May-07 21:06:49 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:06:49 LOG2 antvel: Parameters to Doppler: Topocentric 90409 2010 127 0.0 2010-May-07 21:06:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:06:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-May-07 21:06:49 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-May-07 21:06:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:06:49 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:06:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-May-07 21:06:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:06:49 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2010-May-07 21:06:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:06:49 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-May-07 21:06:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2010-May-07 21:06:49 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.714116 2010.3501156298323 18.999933 2010-May-07 21:06:49 LOG4 log_alfabeam: ALFABEAM 0 11.732027777777578 9.856972222222225 2010-May-07 21:06:49 LOG4 log_alfabeam: ALFABEAM 1 11.730545240361765 9.960820323950319 2010-May-07 21:06:49 LOG4 log_alfabeam: ALFABEAM 2 11.726102099388912 9.888228615749009 2010-May-07 21:06:49 LOG4 log_alfabeam: ALFABEAM 3 11.727539054358248 9.784217991083384 2010-May-07 21:06:49 LOG4 log_alfabeam: ALFABEAM 4 11.733537883544555 9.753176822592158 2010-May-07 21:06:49 LOG4 log_alfabeam: ALFABEAM 5 11.737996751753281 9.826588452988794 2010-May-07 21:06:49 LOG4 log_alfabeam: ALFABEAM 6 11.736441151430322 9.930214240635214 2010-May-07 21:06:49 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700109 2010-May-07 21:06:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:06:50 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-May-07 21:06:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:06:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-May-07 21:06:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:06:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:06:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:06:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-May-07 21:06:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4011.00 2010-May-07 21:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:07:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:07:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:07:01 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-May-07 21:07:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:07:01 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-May-07 21:07:01 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2010-May-07 21:07:01 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-May-07 21:07:01 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-May-07 21:07:01 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:07:01 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35012 J 2010-May-07 21:07:01 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:07:01 LOG2 antvel: Parameters to Doppler: Topocentric 90421 2010 127 0.0 2010-May-07 21:07:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:07:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-May-07 21:07:01 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-May-07 21:07:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:07:01 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:07:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-May-07 21:07:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:07:01 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2010-May-07 21:07:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:07:01 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-May-07 21:07:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2010-May-07 21:07:01 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.717458 2010.3501160100893 18.999933 2010-May-07 21:07:01 LOG4 log_alfabeam: ALFABEAM 0 11.732027777777715 9.856972222222231 2010-May-07 21:07:01 LOG4 log_alfabeam: ALFABEAM 1 11.730584436131691 9.960940808130420 2010-May-07 21:07:01 LOG4 log_alfabeam: ALFABEAM 2 11.726113979264703 9.888716234062738 2010-May-07 21:07:01 LOG4 log_alfabeam: ALFABEAM 3 11.727511685273651 9.784588841760797 2010-May-07 21:07:01 LOG4 log_alfabeam: ALFABEAM 4 11.733498738361828 9.753054079008196 2010-May-07 21:07:01 LOG4 log_alfabeam: ALFABEAM 5 11.737985204619537 9.826097475086110 2010-May-07 21:07:01 LOG4 log_alfabeam: ALFABEAM 6 11.736468693813793 9.929849711927400 2010-May-07 21:07:01 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700110 2010-May-07 21:07:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:07:02 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-May-07 21:07:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:07:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-May-07 21:07:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:07:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:07:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:07:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-May-07 21:07:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4023.00 2010-May-07 21:07:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:07:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:07:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:07:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:07:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:07:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:07:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:07:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:07:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:07:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:07:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:07:13 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-May-07 21:07:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:07:13 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-May-07 21:07:13 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2010-May-07 21:07:13 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-May-07 21:07:13 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-May-07 21:07:13 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:07:13 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35012 J 2010-May-07 21:07:13 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:07:13 LOG2 antvel: Parameters to Doppler: Topocentric 90433 2010 127 0.0 2010-May-07 21:07:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:07:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-May-07 21:07:13 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-May-07 21:07:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:07:13 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:07:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-May-07 21:07:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:07:13 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2010-May-07 21:07:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:07:13 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-May-07 21:07:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2010-May-07 21:07:13 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.720801 2010.3501163903466 18.999933 2010-May-07 21:07:13 LOG4 log_alfabeam: ALFABEAM 0 11.732027777777715 9.856972222222222 2010-May-07 21:07:13 LOG4 log_alfabeam: ALFABEAM 1 11.730623706109530 9.961058149273066 2010-May-07 21:07:13 LOG4 log_alfabeam: ALFABEAM 2 11.726126051397959 9.889203220676119 2010-May-07 21:07:13 LOG4 log_alfabeam: ALFABEAM 3 11.727484437013773 9.784962216951408 2010-May-07 21:07:13 LOG4 log_alfabeam: ALFABEAM 4 11.733459517313946 9.752934470413491 2010-May-07 21:07:13 LOG4 log_alfabeam: ALFABEAM 5 11.737973462923229 9.825607069021471 2010-May-07 21:07:13 LOG4 log_alfabeam: ALFABEAM 6 11.736496120263116 9.929482633916788 2010-May-07 21:07:13 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700111 2010-May-07 21:07:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:07:14 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2010-May-07 21:07:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-May-07 21:07:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:07:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:07:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:07:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:07:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-May-07 21:07:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4035.00 2010-May-07 21:07:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:07:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:07:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:07:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:07:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:07:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:07:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:07:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:07:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:07:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:07:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:07:25 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2010-May-07 21:07:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:07:25 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-May-07 21:07:25 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2010-May-07 21:07:25 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-May-07 21:07:25 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-May-07 21:07:25 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:07:25 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35012 J 2010-May-07 21:07:25 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:07:25 LOG2 antvel: Parameters to Doppler: Topocentric 90445 2010 127 0.0 2010-May-07 21:07:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:07:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-May-07 21:07:25 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-May-07 21:07:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:07:25 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:07:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-May-07 21:07:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:07:25 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2010-May-07 21:07:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:07:25 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-May-07 21:07:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2010-May-07 21:07:25 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.724143 2010.3501167706036 18.999933 2010-May-07 21:07:25 LOG4 log_alfabeam: ALFABEAM 0 11.732027777777695 9.856972222222225 2010-May-07 21:07:25 LOG4 log_alfabeam: ALFABEAM 1 11.730663023076872 9.961172261852502 2010-May-07 21:07:25 LOG4 log_alfabeam: ALFABEAM 2 11.726138307623039 9.889689236261777 2010-May-07 21:07:25 LOG4 log_alfabeam: ALFABEAM 3 11.727457328675488 9.785337859909928 2010-May-07 21:07:25 LOG4 log_alfabeam: ALFABEAM 4 11.733420247578533 9.752818084123037 2010-May-07 21:07:25 LOG4 log_alfabeam: ALFABEAM 5 11.737961534564811 9.825117576760876 2010-May-07 21:07:25 LOG4 log_alfabeam: ALFABEAM 6 11.736523411546374 9.929113258320802 2010-May-07 21:07:25 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700112 2010-May-07 21:07:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:07:26 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2010-May-07 21:07:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:07:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-May-07 21:07:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:07:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:07:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:07:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-May-07 21:07:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4047.00 2010-May-07 21:07:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:07:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:07:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:07:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:07:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:07:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:07:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:07:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:07:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:07:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:07:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:07:37 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2010-May-07 21:07:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:07:37 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-May-07 21:07:37 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2010-May-07 21:07:37 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-May-07 21:07:37 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-May-07 21:07:37 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:07:37 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35012 J 2010-May-07 21:07:37 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:07:37 LOG2 antvel: Parameters to Doppler: Topocentric 90457 2010 127 0.0 2010-May-07 21:07:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:07:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-May-07 21:07:37 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-May-07 21:07:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:07:37 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:07:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-May-07 21:07:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:07:37 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2010-May-07 21:07:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:07:37 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-May-07 21:07:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2010-May-07 21:07:37 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.727486 2010.3501171508606 18.999933 2010-May-07 21:07:37 LOG4 log_alfabeam: ALFABEAM 0 11.732027777777626 9.856972222222225 2010-May-07 21:07:37 LOG4 log_alfabeam: ALFABEAM 1 11.730702406814927 9.961283199747005 2010-May-07 21:07:37 LOG4 log_alfabeam: ALFABEAM 2 11.726150754275022 9.890174523863370 2010-May-07 21:07:37 LOG4 log_alfabeam: ALFABEAM 3 11.727430346795639 9.785715961321781 2010-May-07 21:07:37 LOG4 log_alfabeam: ALFABEAM 4 11.733380909391558 9.752704865334039 2010-May-07 21:07:37 LOG4 log_alfabeam: ALFABEAM 5 11.737949413338621 9.824628753796606 2010-May-07 21:07:37 LOG4 log_alfabeam: ALFABEAM 6 11.736550581205158 9.928741396952475 2010-May-07 21:07:37 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700113 2010-May-07 21:07:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:07:38 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-May-07 21:07:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:07:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-May-07 21:07:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:07:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:07:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:07:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-May-07 21:07:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4059.00 2010-May-07 21:07:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:07:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:07:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:07:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:07:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:07:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:07:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:07:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:07:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:07:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:07:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:07:49 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-May-07 21:07:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:07:49 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-May-07 21:07:49 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2010-May-07 21:07:49 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-May-07 21:07:49 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-May-07 21:07:49 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:07:49 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35012 J 2010-May-07 21:07:49 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:07:49 LOG2 antvel: Parameters to Doppler: Topocentric 90469 2010 127 0.0 2010-May-07 21:07:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:07:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-May-07 21:07:49 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-May-07 21:07:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:07:49 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:07:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-May-07 21:07:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:07:49 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2010-May-07 21:07:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:07:49 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-May-07 21:07:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2010-May-07 21:07:49 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.730828 2010.3501175311176 18.999933 2010-May-07 21:07:49 LOG4 log_alfabeam: ALFABEAM 0 11.732027777777390 9.856972222222231 2010-May-07 21:07:49 LOG4 log_alfabeam: ALFABEAM 1 11.730741829996344 9.961390883107686 2010-May-07 21:07:49 LOG4 log_alfabeam: ALFABEAM 2 11.726163382852626 9.890658745573045 2010-May-07 21:07:49 LOG4 log_alfabeam: ALFABEAM 3 11.727403510239387 9.786096260160672 2010-May-07 21:07:49 LOG4 log_alfabeam: ALFABEAM 4 11.733341530043292 9.752594895699156 2010-May-07 21:07:49 LOG4 log_alfabeam: ALFABEAM 5 11.737937107485461 9.824140940791064 2010-May-07 21:07:49 LOG4 log_alfabeam: ALFABEAM 6 11.736577610230347 9.928367305862929 2010-May-07 21:07:49 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700114 2010-May-07 21:07:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:07:50 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-May-07 21:07:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:07:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-May-07 21:07:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:07:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:07:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:07:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-May-07 21:07:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4071.00 2010-May-07 21:07:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:07:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:07:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:07:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:07:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:07:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:07:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:07:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:07:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:08:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:08:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:08:01 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-May-07 21:08:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:08:01 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-May-07 21:08:01 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2010-May-07 21:08:01 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-May-07 21:08:01 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-May-07 21:08:01 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:08:01 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35012 J 2010-May-07 21:08:01 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:08:01 LOG2 antvel: Parameters to Doppler: Topocentric 90481 2010 127 0.0 2010-May-07 21:08:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:08:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-May-07 21:08:01 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-May-07 21:08:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:08:01 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:08:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-May-07 21:08:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:08:01 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2010-May-07 21:08:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:08:01 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-May-07 21:08:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2010-May-07 21:08:01 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.734171 2010.3501179113748 18.999933 2010-May-07 21:08:01 LOG4 log_alfabeam: ALFABEAM 0 11.732027777777223 9.856972222222225 2010-May-07 21:08:01 LOG4 log_alfabeam: ALFABEAM 1 11.730781312428057 9.961495363828430 2010-May-07 21:08:01 LOG4 log_alfabeam: ALFABEAM 2 11.726176199802737 9.891142143810738 2010-May-07 21:08:01 LOG4 log_alfabeam: ALFABEAM 3 11.727376805630513 9.786478948475459 2010-May-07 21:08:01 LOG4 log_alfabeam: ALFABEAM 4 11.733302089742807 9.752488122398276 2010-May-07 21:08:01 LOG4 log_alfabeam: ALFABEAM 5 11.737924610686646 9.823653893837399 2010-May-07 21:08:01 LOG4 log_alfabeam: ALFABEAM 6 11.736604512078246 9.927990795486279 2010-May-07 21:08:01 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700115 2010-May-07 21:08:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:08:02 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2010-May-07 21:08:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:08:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-May-07 21:08:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:08:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:08:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:08:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-May-07 21:08:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4083.00 2010-May-07 21:08:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:08:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:08:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:08:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:08:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:08:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:08:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:08:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:08:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:08:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:08:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:08:13 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2010-May-07 21:08:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:08:13 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-May-07 21:08:13 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-May-07 21:08:13 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-07 21:08:13 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-07 21:08:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-07 21:08:13 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2010-May-07 21:08:13 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-07 21:08:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-07 21:08:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-07 21:08:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-07 21:08:13 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2010-May-07 21:08:13 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2010-May-07 21:08:13 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-May-07 21:08:13 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-May-07 21:08:13 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:08:13 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35012 J 2010-May-07 21:08:13 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:08:13 LOG2 antvel: Parameters to Doppler: Topocentric 90493 2010 127 0.0 2010-May-07 21:08:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:08:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-May-07 21:08:13 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-May-07 21:08:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:08:13 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:08:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-May-07 21:08:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:08:13 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2010-May-07 21:08:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:08:13 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-May-07 21:08:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2010-May-07 21:08:13 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.737513 2010.3501182916318 18.999933 2010-May-07 21:08:13 LOG4 log_alfabeam: ALFABEAM 0 11.732027777777514 9.856972222222225 2010-May-07 21:08:13 LOG4 log_alfabeam: ALFABEAM 1 11.730820826690751 9.961596567800795 2010-May-07 21:08:13 LOG4 log_alfabeam: ALFABEAM 2 11.726189196297074 9.891624382295072 2010-May-07 21:08:13 LOG4 log_alfabeam: ALFABEAM 3 11.727350251591472 9.786863761105790 2010-May-07 21:08:13 LOG4 log_alfabeam: ALFABEAM 4 11.733262615876376 9.752384621355922 2010-May-07 21:08:13 LOG4 log_alfabeam: ALFABEAM 5 11.737911931519802 9.823167952084392 2010-May-07 21:08:13 LOG4 log_alfabeam: ALFABEAM 6 11.736631267974703 9.927612126066615 2010-May-07 21:08:13 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700116 2010-May-07 21:08:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:08:14 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-May-07 21:08:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:08:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-May-07 21:08:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:08:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:08:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:08:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-May-07 21:08:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4095.00 2010-May-07 21:08:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:08:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:08:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:08:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:08:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:08:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:08:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:08:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:08:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:08:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:08:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:08:25 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-May-07 21:08:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:08:25 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-May-07 21:08:25 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2010-May-07 21:08:25 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-May-07 21:08:25 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-May-07 21:08:25 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:08:25 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35012 J 2010-May-07 21:08:25 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:08:25 LOG2 antvel: Parameters to Doppler: Topocentric 90505 2010 127 0.0 2010-May-07 21:08:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:08:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-May-07 21:08:25 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-May-07 21:08:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:08:25 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:08:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-May-07 21:08:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:08:25 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2010-May-07 21:08:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:08:25 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-May-07 21:08:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2010-May-07 21:08:25 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.740855 2010.3501186718888 18.999933 2010-May-07 21:08:25 LOG4 log_alfabeam: ALFABEAM 0 11.732027777757194 9.856972222222204 2010-May-07 21:08:25 LOG4 log_alfabeam: ALFABEAM 1 11.730860380790295 9.961694516112310 2010-May-07 21:08:25 LOG4 log_alfabeam: ALFABEAM 2 11.726202374929416 9.892105558984843 2010-May-07 21:08:25 LOG4 log_alfabeam: ALFABEAM 3 11.727323842723516 9.787250775314654 2010-May-07 21:08:25 LOG4 log_alfabeam: ALFABEAM 4 11.733223100471543 9.752284371246114 2010-May-07 21:08:25 LOG4 log_alfabeam: ALFABEAM 5 11.737899067441823 9.822683017196319 2010-May-07 21:08:25 LOG4 log_alfabeam: ALFABEAM 6 11.736657883358632 9.927231220985920 2010-May-07 21:08:25 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700117 2010-May-07 21:08:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:08:26 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-May-07 21:08:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:08:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-May-07 21:08:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:08:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:08:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:08:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-May-07 21:08:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4107.00 2010-May-07 21:08:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:08:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:08:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:08:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:08:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:08:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:08:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:08:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:08:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:08:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:08:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:08:37 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-May-07 21:08:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:08:37 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-May-07 21:08:37 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2010-May-07 21:08:37 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-May-07 21:08:37 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-May-07 21:08:37 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:08:37 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35012 J 2010-May-07 21:08:37 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:08:37 LOG2 antvel: Parameters to Doppler: Topocentric 90517 2010 127 0.0 2010-May-07 21:08:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:08:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-May-07 21:08:37 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-May-07 21:08:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:08:37 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:08:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-May-07 21:08:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:08:37 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2010-May-07 21:08:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:08:37 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-May-07 21:08:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2010-May-07 21:08:37 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.744198 2010.3501190521458 18.999933 2010-May-07 21:08:37 LOG4 log_alfabeam: ALFABEAM 0 11.732027777778761 9.856972222222222 2010-May-07 21:08:37 LOG4 log_alfabeam: ALFABEAM 1 11.730899982708120 9.961789226909412 2010-May-07 21:08:37 LOG4 log_alfabeam: ALFABEAM 2 11.726215738419599 9.892585770880020 2010-May-07 21:08:37 LOG4 log_alfabeam: ALFABEAM 3 11.727297573718854 9.787640070353490 2010-May-07 21:08:37 LOG4 log_alfabeam: ALFABEAM 4 11.733183535466914 9.752187353680293 2010-May-07 21:08:37 LOG4 log_alfabeam: ALFABEAM 5 11.737886015696098 9.822198991751911 2010-May-07 21:08:37 LOG4 log_alfabeam: ALFABEAM 6 11.736684363494067 9.926848001609805 2010-May-07 21:08:37 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700118 2010-May-07 21:08:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:08:38 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2010-May-07 21:08:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:08:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-May-07 21:08:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:08:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:08:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:08:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-May-07 21:08:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4119.00 2010-May-07 21:08:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:08:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:08:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:08:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:08:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:08:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:08:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:08:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:08:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:08:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:08:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:08:49 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2010-May-07 21:08:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:08:49 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-May-07 21:08:49 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2010-May-07 21:08:49 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-May-07 21:08:49 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-May-07 21:08:49 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:08:49 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35012 J 2010-May-07 21:08:49 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:08:49 LOG2 antvel: Parameters to Doppler: Topocentric 90529 2010 127 0.0 2010-May-07 21:08:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:08:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-May-07 21:08:49 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-May-07 21:08:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:08:49 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:08:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-May-07 21:08:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:08:49 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2010-May-07 21:08:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:08:49 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-May-07 21:08:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2010-May-07 21:08:49 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.747540 2010.3501194324028 18.999933 2010-May-07 21:08:49 LOG4 log_alfabeam: ALFABEAM 0 11.732027777778024 9.856972222222229 2010-May-07 21:08:49 LOG4 log_alfabeam: ALFABEAM 1 11.730939604956793 9.961880634789230 2010-May-07 21:08:49 LOG4 log_alfabeam: ALFABEAM 2 11.726229277481595 9.893064684516151 2010-May-07 21:08:49 LOG4 log_alfabeam: ALFABEAM 3 11.727271462843035 9.788031375150014 2010-May-07 21:08:49 LOG4 log_alfabeam: ALFABEAM 4 11.733143948398048 9.752093635891660 2010-May-07 21:08:49 LOG4 log_alfabeam: ALFABEAM 5 11.737872785390275 9.821716212245994 2010-May-07 21:08:49 LOG4 log_alfabeam: ALFABEAM 6 11.736710690016565 9.926462734194164 2010-May-07 21:08:49 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700119 2010-May-07 21:08:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:08:50 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2010-May-07 21:08:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:08:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-May-07 21:08:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:08:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:08:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:08:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-May-07 21:08:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4131.00 2010-May-07 21:08:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:08:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:08:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:08:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:08:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:08:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:08:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:08:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:08:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:09:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:09:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:09:01 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2010-May-07 21:09:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:09:01 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-May-07 21:09:01 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2010-May-07 21:09:01 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-May-07 21:09:01 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-May-07 21:09:01 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:09:01 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35012 J 2010-May-07 21:09:01 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:09:01 LOG2 antvel: Parameters to Doppler: Topocentric 90541 2010 127 0.0 2010-May-07 21:09:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:09:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-May-07 21:09:01 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-May-07 21:09:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:09:01 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:09:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-May-07 21:09:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:09:01 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2010-May-07 21:09:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:09:01 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-May-07 21:09:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2010-May-07 21:09:01 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.750883 2010.3501198126601 18.999933 2010-May-07 21:09:01 LOG4 log_alfabeam: ALFABEAM 0 11.732027777778100 9.856972222222227 2010-May-07 21:09:01 LOG4 log_alfabeam: ALFABEAM 1 11.730979267389188 9.961968786674804 2010-May-07 21:09:01 LOG4 log_alfabeam: ALFABEAM 2 11.726242998829081 9.893542540664033 2010-May-07 21:09:01 LOG4 log_alfabeam: ALFABEAM 3 11.727245496933092 9.788424885082154 2010-May-07 21:09:01 LOG4 log_alfabeam: ALFABEAM 4 11.733104319405028 9.752003170026674 2010-May-07 21:09:01 LOG4 log_alfabeam: ALFABEAM 5 11.737859369915874 9.821234436363731 2010-May-07 21:09:01 LOG4 log_alfabeam: ALFABEAM 6 11.736736876150982 9.926075225806368 2010-May-07 21:09:01 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700120 2010-May-07 21:09:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:09:02 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2010-May-07 21:09:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:09:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-May-07 21:09:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:09:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:09:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:09:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-May-07 21:09:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4143.00 2010-May-07 21:09:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:09:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:09:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:09:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:09:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:09:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:09:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:09:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:09:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:09:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:09:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:09:13 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2010-May-07 21:09:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:09:13 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-May-07 21:09:13 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2010-May-07 21:09:13 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-May-07 21:09:13 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-May-07 21:09:13 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:09:13 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35012 J 2010-May-07 21:09:13 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:09:13 LOG2 antvel: Parameters to Doppler: Topocentric 90553 2010 127 0.0 2010-May-07 21:09:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:09:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-May-07 21:09:13 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-May-07 21:09:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:09:13 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:09:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-May-07 21:09:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:09:13 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2010-May-07 21:09:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:09:13 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-May-07 21:09:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2010-May-07 21:09:13 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.754225 2010.3501201929171 18.999933 2010-May-07 21:09:13 LOG4 log_alfabeam: ALFABEAM 0 11.732027777777752 9.856972222222218 2010-May-07 21:09:13 LOG4 log_alfabeam: ALFABEAM 1 11.731018942424095 9.962053623017539 2010-May-07 21:09:13 LOG4 log_alfabeam: ALFABEAM 2 11.726256892823162 9.894019007995437 2010-May-07 21:09:13 LOG4 log_alfabeam: ALFABEAM 3 11.727219693949012 9.788820325348667 2010-May-07 21:09:13 LOG4 log_alfabeam: ALFABEAM 4 11.733064676041691 9.751916017470970 2010-May-07 21:09:13 LOG4 log_alfabeam: ALFABEAM 5 11.737845778666838 9.820753998567586 2010-May-07 21:09:13 LOG4 log_alfabeam: ALFABEAM 6 11.736762903761120 9.925685746505057 2010-May-07 21:09:13 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700121 2010-May-07 21:09:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:09:14 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2010-May-07 21:09:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-May-07 21:09:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:09:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:09:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:09:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:09:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-May-07 21:09:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4155.00 2010-May-07 21:09:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:09:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:09:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:09:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:09:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:09:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:09:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:09:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:09:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:09:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:09:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:09:25 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2010-May-07 21:09:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:09:25 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-May-07 21:09:25 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2010-May-07 21:09:25 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-May-07 21:09:25 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-May-07 21:09:25 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:09:25 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35012 J 2010-May-07 21:09:25 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:09:25 LOG2 antvel: Parameters to Doppler: Topocentric 90565 2010 127 0.0 2010-May-07 21:09:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:09:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-May-07 21:09:25 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-May-07 21:09:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:09:25 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:09:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-May-07 21:09:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:09:25 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2010-May-07 21:09:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-07 21:09:25 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-May-07 21:09:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2010-May-07 21:09:25 LOG5 log_alfabeam: Parameters: 11.732027777777779 9.8569722222222236 11.757568 2010.3501205731741 18.999933 2010-May-07 21:09:25 LOG4 log_alfabeam: ALFABEAM 0 11.732027777777912 9.856972222222222 2010-May-07 21:09:25 LOG4 log_alfabeam: ALFABEAM 1 11.731058649946487 9.962135188743275 2010-May-07 21:09:25 LOG4 log_alfabeam: ALFABEAM 2 11.726270966298463 9.894494326581317 2010-May-07 21:09:25 LOG4 log_alfabeam: ALFABEAM 3 11.727194040829829 9.789217892628018 2010-May-07 21:09:25 LOG4 log_alfabeam: ALFABEAM 4 11.733024998437926 9.751832132366276 2010-May-07 21:09:25 LOG4 log_alfabeam: ALFABEAM 5 11.737832004936166 9.820274657219519 2010-May-07 21:09:25 LOG4 log_alfabeam: ALFABEAM 6 11.736788785996584 9.925294102042457 2010-May-07 21:09:25 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12700122 2010-May-07 21:09:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-07 21:09:26 LOG5 begin_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2010-May-07 21:09:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:09:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-May-07 21:09:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:09:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:09:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:09:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-May-07 21:09:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4167.00 2010-May-07 21:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:09:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:09:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-07 21:09:37 LOG5 end_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2010-May-07 21:09:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-07 21:09:37 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-May-07 21:09:37 INFO2 smartfreq: Switching off CAL 2010-May-07 21:09:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-07 21:09:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-07 21:09:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-07 21:09:37 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2010-May-07 21:09:37 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-07 21:09:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-07 21:09:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-07 21:09:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-07 21:09:37 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2010-May-07 21:09:37 INFO3 restore_frequencies: Restoring original frequencies 2010-May-07 21:09:37 LOG5 antvel: Calling 'antvel 114355.300000 95125.100000 J Topocentric 0' 2010-May-07 21:09:37 LOG2 antvel: Precessing RA = 11:43:55.3 Dec = +09:51:25.1 Epoch = 2010.35012 J 2010-May-07 21:09:37 LOG2 antvel: Computed apparent RA = 11:44:29.1 Dec = +09:47:49.5 2010-May-07 21:09:37 LOG2 antvel: Parameters to Doppler: Topocentric 90577 2010 127 0.0 2010-May-07 21:09:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-07 21:09:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2010-May-07 21:09:37 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2010-May-07 21:09:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:09:37 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:09:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-May-07 21:09:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:09:37 STOP finish_task: Finishing task 'smart frequency switching' 2010-May-07 21:09:37 LOG5 finish_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2010-May-07 21:09:37 DONE finish_task: DONE finished pattern: smart frequency switching 2010-May-07 21:09:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-07 21:09:37 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2010-May-07 21:09:37 LOG5 end_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2010-May-07 21:09:37 NOTE run_command_file: DONE with command file processing 2010-May-07 21:09:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-May-07 21:09:38 STOP finish_task: Finishing task 'running command file 'command_galfacurpos_cima31.cmd'' 2010-May-07 21:09:38 LOG5 finish_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2010-May-07 21:09:38 DONE finish_task: DONE finished running: command file 'command_galfacurpos_cima31.cmd' 2010-May-07 21:09:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-07 21:09:38 END end_task: Finishing task 'running command file 'command_galfacurpos_cima31.cmd'' with status 'OK' 2010-May-07 21:09:38 LOG5 end_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2010-May-07 21:09:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-May-07 21:09:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:09:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:09:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:10:04 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima31.cmd' (at lines 1 - 24) 2010-May-07 21:10:04 INFO4 CIMA-load_command_file: Loaded command file '100507.cmd' 2010-May-07 21:10:26 INFO1 CIMA-run_command_file: Transferring command file '100507.cmd' to executive ... 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima31.conf} 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 27 {LOAD ages_mock.conf} 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 28 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 29 {CATALOG AGESFull.cat} 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 32 {IF LSTSLEW(AGESVC1B_p2_017) < 120433 THEN} 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 33 {FIXEDDRIFT az=327.44 alfaangle=46.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_017 ra=122900.00 dec=83600.00} 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 36 {ENDIF} 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 39 {IF LSTSLEW(AGESVC2B_p2_019) < 122933 THEN} 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 40 {FIXEDDRIFT az=0.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_019 ra=122900.00 dec=83300.00} 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 43 {ENDIF} 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 46 {IF LSTSLEW(AGESVC1B_p2_021) < 125433 THEN} 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 47 {FIXEDDRIFT az=32.30 alfaangle=-8.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_021 ra=122900.00 dec=83000.00} 2010-May-07 21:10:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 50 {ENDIF} 2010-May-07 21:10:26 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-May-07 21:10:27 LOG4 exec_msg: From OBSERVER: run_command_file 100507.cmd 27 1 25 2010-May-07 21:10:27 LOG4 run_command_file: Calling 'run_command_file 100507.cmd 27 1 25' 2010-May-07 21:10:27 BEGIN begin_task: Starting task 'running command file '100507.cmd'' 2010-May-07 21:10:27 LOG5 begin_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2010-May-07 21:10:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100507.cmd' ...} 2010-May-07 21:10:27 NOTE run_command_file: Starting execution of command file '100507.cmd' from line 27 2010-May-07 21:10:27 COMMAND run_command_line: EXECUTING command 27: 'LOAD ages_mock.conf' 2010-May-07 21:10:27 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-May-07 21:10:27 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-07 21:10:27 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-May-07 21:10:27 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2010-May-07 21:10:27 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2010-May-07 21:10:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-May-07 21:10:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-May-07 21:10:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-May-07 21:10:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-May-07 21:10:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-May-07 21:10:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2010-May-07 21:10:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-May-07 21:10:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2010-May-07 21:10:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2010-May-07 21:10:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2010-May-07 21:10:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2010-May-07 21:10:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2010-May-07 21:10:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2010-May-07 21:10:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-07 21:10:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2010-May-07 21:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2010-May-07 21:10:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2010-May-07 21:10:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2010-May-07 21:10:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2010-May-07 21:10:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2010-May-07 21:10:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2010-May-07 21:10:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2010-May-07 21:10:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2010-May-07 21:10:30 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2010-May-07 21:10:30 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-07 21:10:30 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-May-07 21:10:30 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2010-May-07 21:10:30 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-May-07 21:10:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-May-07 21:10:30 LOG1 config_iflo: Receiver ALFA already selected 2010-May-07 21:10:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-07 21:10:30 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-07 21:10:30 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-07 21:10:30 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2010-May-07 21:10:30 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-07 21:10:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-07 21:10:30 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2010-May-07 21:10:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-07 21:10:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-07 21:10:30 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-May-07 21:10:30 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-May-07 21:10:30 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-May-07 21:10:30 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-May-07 21:10:30 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-May-07 21:10:30 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-May-07 21:10:30 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-May-07 21:10:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2010-May-07 21:10:30 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-May-07 21:10:30 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-May-07 21:10:30 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-May-07 21:10:30 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-May-07 21:10:30 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-May-07 21:10:30 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-May-07 21:10:30 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-May-07 21:10:30 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-May-07 21:10:30 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-May-07 21:10:30 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-May-07 21:10:30 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-May-07 21:10:30 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-May-07 21:10:30 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-May-07 21:10:30 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-May-07 21:10:30 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-May-07 21:10:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:10:30 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-May-07 21:10:30 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-May-07 21:10:30 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-May-07 21:10:30 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-May-07 21:10:30 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-May-07 21:10:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-May-07 21:10:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:10:30 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-May-07 21:10:30 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2010-May-07 21:10:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2010-May-07 21:10:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-May-07 21:10:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:10:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:10:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:10:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:10:30 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-May-07 21:10:30 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-May-07 21:10:30 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2010-May-07 21:10:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-May-07 21:10:30 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-May-07 21:10:30 LOG5 finish_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2010-May-07 21:10:30 DONE finish_task: DONE finished configuration: IF/LO path 2010-May-07 21:10:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-07 21:10:30 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-May-07 21:10:31 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2010-May-07 21:10:31 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-May-07 21:10:31 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2010-May-07 21:10:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-May-07 21:10:31 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-May-07 21:10:31 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-May-07 21:10:31 START begin_task: Starting task 'selecting calibration port' 2010-May-07 21:10:31 LOG5 begin_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2010-May-07 21:10:31 LOG3 vw_send: To DATATAKING: calport 3 2010-May-07 21:10:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-May-07 21:10:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:10:31 START begin_task: Starting task 'waiting on calport' 2010-May-07 21:10:31 LOG5 begin_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2010-May-07 21:10:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:10:31 LOG4 got_cormsg: From DATATAKING: calport 3 2010-May-07 21:10:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:10:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:10:31 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-07 21:10:31 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-May-07 21:10:31 LOG5 end_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2010-May-07 21:10:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-May-07 21:10:31 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-May-07 21:10:31 LOG5 end_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2010-May-07 21:10:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-07 21:10:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-07 21:10:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-07 21:10:31 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2010-May-07 21:10:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:10:31 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-07 21:10:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-07 21:10:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-07 21:10:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-07 21:10:31 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2010-May-07 21:10:31 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-May-07 21:10:31 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-May-07 21:10:31 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-May-07 21:10:31 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-May-07 21:10:31 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-May-07 21:10:31 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-May-07 21:10:31 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-May-07 21:10:31 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-May-07 21:10:31 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-07 21:10:31 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-07 21:10:31 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-07 21:10:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-07 21:10:31 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-May-07 21:10:31 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-May-07 21:10:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-07 21:10:31 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2010-May-07 21:10:31 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-07 21:10:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-May-07 21:10:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-07 21:10:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-May-07 21:10:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-07 21:10:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-07 21:10:31 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2010-May-07 21:10:31 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-May-07 21:10:32 STOP finish_task: Finishing task 'configuring WAPPs' 2010-May-07 21:10:32 LOG5 finish_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2010-May-07 21:10:32 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-May-07 21:10:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-07 21:10:32 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-May-07 21:10:32 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2010-May-07 21:10:32 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2010-May-07 21:10:32 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-May-07 21:10:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2010-May-07 21:10:32 INFO1 config_mock: Starting to configure the Mock spectrometer 2010-May-07 21:10:32 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-May-07 21:10:32 START begin_task: Starting task 'selecting calibration port' 2010-May-07 21:10:32 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2010-May-07 21:10:32 LOG3 vw_send: To DATATAKING: calport 3 2010-May-07 21:10:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-May-07 21:10:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:10:32 START begin_task: Starting task 'waiting on calport' 2010-May-07 21:10:32 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2010-May-07 21:10:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-07 21:10:32 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-May-07 21:10:32 LOG4 got_cormsg: From DATATAKING: calport 3 2010-May-07 21:10:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:10:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:10:32 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-07 21:10:32 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-May-07 21:10:32 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2010-May-07 21:10:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-May-07 21:10:32 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-May-07 21:10:32 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2010-May-07 21:10:32 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-07 21:10:32 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-07 21:10:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-07 21:10:32 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2010-May-07 21:10:32 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-07 21:10:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:10:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-07 21:10:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-07 21:10:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-07 21:10:32 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2010-May-07 21:10:32 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-May-07 21:10:32 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-May-07 21:10:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-07 21:10:32 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2010-May-07 21:10:32 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-07 21:10:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-07 21:10:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-07 21:10:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-07 21:10:32 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2010-May-07 21:10:32 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2010-May-07 21:10:32 LOG3 socket_wait: To MOCK: NOP 2010-May-07 21:10:32 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2010-May-07 21:10:32 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2010-May-07 21:10:33 ALERT got_mock_message: Mock spectrometer restarting 2010-May-07 21:10:33 LOG4 from_mock: From MOCK: nop ok 2010-May-07 21:10:33 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2010-May-07 21:10:33 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2010-May-07 21:10:33 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2010-May-07 21:10:33 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2010-May-07 21:10:33 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2010-May-07 21:10:33 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2010-May-07 21:10:33 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2010-May-07 21:10:33 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2010-May-07 21:10:33 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2010-May-07 21:10:33 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2010-May-07 21:10:33 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2010-May-07 21:10:33 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2010-May-07 21:10:33 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2010-May-07 21:10:33 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2010-May-07 21:10:33 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2010-May-07 21:10:33 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2010-May-07 21:10:33 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2010-May-07 21:10:33 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2010-May-07 21:10:33 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2010-May-07 21:10:33 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2010-May-07 21:10:33 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2010-May-07 21:10:33 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2010-May-07 21:10:33 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2010-May-07 21:10:33 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2010-May-07 21:10:33 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2010-May-07 21:10:34 LOG4 from_mock: From MOCK: confok 2010-May-07 21:10:34 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2010-May-07 21:10:34 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2010-May-07 21:10:34 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2010-May-07 21:10:34 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2010-May-07 21:10:34 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2010-May-07 21:10:34 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2010-May-07 21:10:34 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2010-May-07 21:10:34 LOG4 from_mock: From MOCK: confok 2010-May-07 21:10:34 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2010-May-07 21:10:34 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2010-May-07 21:10:34 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2010-May-07 21:10:34 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2010-May-07 21:10:34 LOG5 finish_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-May-07 21:10:34 DONE finish_task: DONE finished configuring: the Mock spectrometer 2010-May-07 21:10:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-07 21:10:34 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2010-May-07 21:10:34 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-May-07 21:10:34 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2010-May-07 21:10:34 COMMAND run_command_line: EXECUTING command 28: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2010-May-07 21:10:34 COMMAND run_command_line: EXECUTING command 29: 'CATALOG AGESFull.cat' 2010-May-07 21:10:34 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2010-May-07 21:10:34 COMMAND run_command_line: EXECUTING command 32: 'IF LSTSLEW(AGESVC1B_p2_017) < 120433 THEN' 2010-May-07 21:10:34 LOG3 is_if_valid: Current source data: up 311.9 14.3 UP - - 113 2.4 2010-May-07 21:10:34 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1B_p2_017) < 120433 2010-May-07 21:10:34 INFO5 is_if_valid: Condition parsed as: 11.816507999999999 < 12.075833333333334 2010-May-07 21:10:34 COMMAND run_command_line: EXECUTING command 33: 'FIXEDDRIFT az=327.44 alfaangle=46.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_017 ra=122900.00 dec=83600.00' 2010-May-07 21:10:35 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-May-07 21:10:36 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-07 21:10:36 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 327.44 46.4 hcorcal 5 tracking no off lcorcal first 1 AGESVC1B_p2_017 122900.00 83600.00 J 8500.0 Heliocentric velocity(optical)' 2010-May-07 21:10:36 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-May-07 21:10:36 LOG5 begin_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2010-May-07 21:10:36 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'Cur-pos' 2010-May-07 21:10:36 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-May-07 21:10:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p2_017} 2010-May-07 21:10:36 INFO3 fixed_driftmap: Sending telescope to Az = 327.44 and ZA = 11.54 2010-May-07 21:10:37 LOG3 track_source: Calling 'track_source AGESVC1B_p2_017 327.44 11.5389512294 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-07 21:10:37 START begin_task: Starting task 'sending tracking commands' 2010-May-07 21:10:37 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-May-07 21:10:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_017} INFO {Slewing to source 'AGESVC1B_p2_017' ...} 2010-May-07 21:10:37 INFO1 track_source: Starting to track AGESVC1B_p2_017 2010-May-07 21:10:37 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_017" 2010-May-07 21:10:37 LOG3 vw_send: To DATATAKING: set ra 327.44 2010-May-07 21:10:37 LOG3 vw_send: To DATATAKING: set dec 11.5389512294 2010-May-07 21:10:37 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-07 21:10:37 LOG3 vw_send: To DATATAKING: pnt tr 327.44 11.5389512294 -CF 2010-May-07 21:10:37 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-07 21:10:37 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-07 21:10:37 LOG5 finish_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-May-07 21:10:37 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-07 21:10:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 21:10:37 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-07 21:10:37 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-May-07 21:10:37 START begin_task: Starting task 'rotate ALFA to +46.4 degrees' 2010-May-07 21:10:37 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2010-May-07 21:10:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +46.4 degrees ...} 2010-May-07 21:10:37 INFO2 rotate_alfa: ALFA commanded to +46.4 degrees 2010-May-07 21:10:37 LOG3 sock_errsend: To ALFAMOTOR: POSITION 46.4 REPLY 2010-May-07 21:10:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-May-07 21:10:37 START begin_task: Starting task 'waiting on ALFA rotation' 2010-May-07 21:10:37 LOG5 begin_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2010-May-07 21:10:37 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_017" 2010-May-07 21:10:37 LOG4 got_cormsg: From DATATAKING: set ra 327.44 2010-May-07 21:10:37 LOG4 got_cormsg: From DATATAKING: set dec 11.5389512294 2010-May-07 21:10:37 LOG4 got_cormsg: From DATATAKING: vw% 327.44 2010-May-07 21:10:37 LOG4 got_cormsg: From DATATAKING: vw% 11.5389512294 2010-May-07 21:10:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:10:37 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-07 21:10:37 LOG4 got_cormsg: From DATATAKING: pnt tr 327.44 11.5389512294 -CF 2010-May-07 21:10:37 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-07 21:10:37 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-07 21:10:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:10:54 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-May-07 21:10:54 INFO3 alfa_motor: ALFA rotator in-position +46.40 degrees 2010-May-07 21:10:54 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-May-07 21:10:54 LOG5 end_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2010-May-07 21:10:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-07 21:10:54 STOP finish_task: Finishing task 'rotate ALFA to +46.4 degrees' 2010-May-07 21:10:54 LOG5 finish_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2010-May-07 21:10:54 INFO2 finish_task: DONE finished configuration: rotating ALFA to +46.4 degrees 2010-May-07 21:10:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 21:10:54 STOP end_task: Finishing task 'rotate ALFA to +46.4 degrees' with status 'OK' 2010-May-07 21:10:54 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2010-May-07 21:10:54 START begin_task: Starting task 'waiting on telescope' 2010-May-07 21:10:54 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2010-May-07 21:10:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-07 21:10:54 LOG3 waittrk: Start waittrk 5 2010-May-07 21:10:54 START begin_task: Starting task 'waiting on telescope movement' 2010-May-07 21:10:54 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2010-May-07 21:10:59 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-07 21:10:59 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2010-May-07 21:10:59 START begin_task: Starting task 'waiting on telescope on source' 2010-May-07 21:10:59 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2010-May-07 21:12:21 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-07 21:12:21 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2010-May-07 21:12:21 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-07 21:12:21 INFO2 waittrk: Now tracking AGESVC1B_p2_017 2010-May-07 21:12:21 LOG4 waittrk: Current telescope position: Az = 327.07 ZA = 11.52 2010-May-07 21:12:21 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-07 21:12:21 LOG5 finish_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2010-May-07 21:12:21 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-07 21:12:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 21:12:21 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-07 21:12:21 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2010-May-07 21:12:21 START begin_task: Starting task 'selecting calibration type' 2010-May-07 21:12:21 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2010-May-07 21:12:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-07 21:12:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-07 21:12:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:12:21 START begin_task: Starting task 'waiting on setcal' 2010-May-07 21:12:21 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2010-May-07 21:12:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-07 21:12:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:12:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:12:21 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-07 21:12:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-07 21:12:21 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2010-May-07 21:12:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-07 21:12:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-07 21:12:21 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-07 21:12:21 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-07 21:12:21 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2010-May-07 21:12:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:12:21 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-07 21:12:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-07 21:12:21 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2010-May-07 21:12:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-07 21:12:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-07 21:12:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-07 21:12:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-07 21:12:21 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-07 21:12:21 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2010-May-07 21:12:21 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-07 21:12:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-07 21:12:21 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2010-May-07 21:12:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-07 21:12:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-07 21:12:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-07 21:12:21 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2010-May-07 21:12:22 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2010-May-07 21:12:22 INFO2 astwait: Waiting for 906 seconds from 01:12:22 to 01:27:28 UTC ... 2010-May-07 21:12:22 LOG4 send_obs_status: To obs_status: <1> TASKTIME 906 BITMAP stat_wait MESSAGE {Waiting ...} 2010-May-07 21:12:22 START begin_task: Starting task 'waiting on waiting for AST time' 2010-May-07 21:12:22 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-May-07 21:27:28 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2010-May-07 21:27:28 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-May-07 21:27:28 INFO3 astwait: Finished waiting 2010-May-07 21:27:28 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-May-07 21:27:28 LOG5 dopset_later: Calling 'dopset_later 61.189079837735051' 2010-May-07 21:27:28 INFO3 dopset_later: Setting Doppler correction for 21:28:28 (61.2 seconds from now) 2010-May-07 21:27:28 LOG5 antvel: Calling 'antvel 327.440000 11.538951 F Heliocentric 61.189079837735051' 2010-May-07 21:27:28 LOG2 antvel: Transforming current Az = 327.44 ZA = 11.54 to apparent RA = 12:29:33.3 Dec = +08:32:24.4 2010-May-07 21:27:28 LOG2 antvel: Parameters to Doppler: Heliocentric 91708 2010 127 0.0 2010-May-07 21:27:28 INFO5 antvel: Computed antenna velocity: +19.79815 km/s 2010-May-07 21:27:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=19.7981539082 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-May-07 21:27:28 INFO4 dopset_gen: New sky frequencies: 1381.152218 1381.152218 1381.152218 1381.152218 1381.152218 1381.152218 1381.152218 1381.152218 1381.152218 2010-May-07 21:27:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.152218 sky0=1381.152218 sky1=1381.152218 sky2=1381.152218 sky3=1381.152218 sky4=1381.152218 sky5=1381.152218 sky6=1381.152218 sky7=1381.152218 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 21:27:28 LOG2 dopset_gen: Result from 'sky2syn': 1631.152218 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 21:27:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631152218.0} 2010-May-07 21:27:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:27:28 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2010-May-07 21:27:28 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2010-May-07 21:27:28 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:28:03.6 Dec = +08:35:50.3 2010-May-07 21:27:28 LOG3 track_source: Calling 'track_source AGESVC1B_p2_017 122803.6 083550.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-07 21:27:28 START begin_task: Starting task 'sending tracking commands' 2010-May-07 21:27:28 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2010-May-07 21:27:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_017} INFO {Slewing to source 'AGESVC1B_p2_017' ...} 2010-May-07 21:27:28 INFO1 track_source: Starting to track AGESVC1B_p2_017 2010-May-07 21:27:28 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_017" 2010-May-07 21:27:28 LOG3 vw_send: To DATATAKING: set ra 122803.6 2010-May-07 21:27:28 LOG3 vw_send: To DATATAKING: set dec 083550.3 2010-May-07 21:27:28 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-07 21:27:28 LOG3 vw_send: To DATATAKING: pnt tr 122803.6 083550.3 -CJ 2010-May-07 21:27:28 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-07 21:27:28 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-07 21:27:28 LOG5 finish_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2010-May-07 21:27:28 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-07 21:27:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 21:27:28 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-07 21:27:28 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2010-May-07 21:27:28 START begin_task: Starting task 'waiting on telescope' 2010-May-07 21:27:28 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2010-May-07 21:27:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-07 21:27:28 LOG3 waittrk: Start waittrk 5 2010-May-07 21:27:28 START begin_task: Starting task 'waiting on telescope movement' 2010-May-07 21:27:28 LOG5 begin_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2010-May-07 21:27:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631152218.0} 2010-May-07 21:27:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 21:27:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:27:28 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_017" 2010-May-07 21:27:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:27:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:27:28 LOG4 got_cormsg: From DATATAKING: set ra 122803.6 2010-May-07 21:27:28 LOG4 got_cormsg: From DATATAKING: set dec 083550.3 2010-May-07 21:27:28 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-07 21:27:28 LOG4 got_cormsg: From DATATAKING: pnt tr 122803.6 083550.3 -CJ 2010-May-07 21:27:28 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-07 21:27:28 LOG4 got_cormsg: From DATATAKING: 122803.6 2010-May-07 21:27:28 LOG4 got_cormsg: From DATATAKING: vw% 083550.3 2010-May-07 21:27:28 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2010-May-07 21:27:33 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-07 21:27:33 LOG5 end_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2010-May-07 21:27:33 START begin_task: Starting task 'waiting on telescope on source' 2010-May-07 21:27:33 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2010-May-07 21:27:35 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-07 21:27:35 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2010-May-07 21:27:35 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-07 21:27:35 INFO2 waittrk: Now tracking AGESVC1B_p2_017 2010-May-07 21:27:35 LOG4 waittrk: Current telescope position: Az = 327.14 ZA = 11.52 2010-May-07 21:27:35 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-07 21:27:35 LOG5 finish_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2010-May-07 21:27:35 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-07 21:27:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 21:27:35 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-07 21:27:35 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2010-May-07 21:27:35 START begin_task: Starting task 'adjusting WAPP+Mock power' 2010-May-07 21:27:35 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-May-07 21:27:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2010-May-07 21:27:35 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2010-May-07 21:27:35 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-May-07 21:27:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-May-07 21:27:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:27:35 START begin_task: Starting task 'waiting on adjpwrif2' 2010-May-07 21:27:35 LOG5 begin_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2010-May-07 21:27:35 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-May-07 21:27:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:27:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:27:39 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-07 21:27:39 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-May-07 21:27:39 LOG5 end_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2010-May-07 21:27:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-May-07 21:27:39 START begin_task: Starting task 'adjusting WAPP power' 2010-May-07 21:27:39 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2010-May-07 21:27:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-07 21:27:39 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-May-07 21:27:39 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-May-07 21:27:39 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-May-07 21:27:39 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-May-07 21:27:39 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-May-07 21:27:39 LOG5 begin_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2010-May-07 21:27:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-May-07 21:27:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:27:39 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-May-07 21:27:39 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 5 dB 2010-May-07 21:27:39 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 4 3 dB 2010-May-07 21:27:39 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-May-07 21:27:39 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-May-07 21:27:39 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-May-07 21:27:39 LOG5 end_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2010-May-07 21:27:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.985 0.989 ALFA beam 1: 1.070 1.095 2010-May-07 21:27:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.998 0.974 ALFA beam 3: 0.950 1.034 2010-May-07 21:27:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.937 0.940 ALFA beam 5: 0.970 1.039 2010-May-07 21:27:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.958 0.931 ALFA beam 7: 1.044 1.086 2010-May-07 21:27:39 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-07 21:27:39 LOG5 finish_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2010-May-07 21:27:39 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-May-07 21:27:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 21:27:39 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-07 21:27:39 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2010-May-07 21:27:39 START begin_task: Starting task 'adjusting Mock spectrometer power' 2010-May-07 21:27:39 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2010-May-07 21:27:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-07 21:27:39 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2010-May-07 21:27:39 LOG3 socket_wait: To MOCK: ADJP30 2010-May-07 21:27:39 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2010-May-07 21:27:39 LOG5 begin_task: Level: (5) ID = <10139> Status = 0 0 0 0 ok 2010-May-07 21:27:45 INFO3 from_mock: From MOCK: b0s0g0 rms:A 33.7 29.8 B 29.4 29.4 mn:A -0.4 -0.7 B -0.9 -0.9 gn: 10 10 2010-May-07 21:27:45 INFO3 from_mock: From MOCK: b0s1g0 rms:A 30.9 29.6 B 24.8 26.2 mn:A 0.6 -0.8 B 0.2 0.3 gn: 10 9 2010-May-07 21:27:45 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.7 29.8 B 33.3 30.0 mn:A -0.1 0.4 B 0.1 1.4 gn: 9 10 2010-May-07 21:27:45 INFO3 from_mock: From MOCK: b1s1g0 rms:A 29.3 26.9 B 24.9 24.9 mn:A -0.0 0.3 B -0.6 -0.1 gn: 9 7 2010-May-07 21:27:45 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.7 28.8 B 28.6 29.8 mn:A 0.0 -0.2 B -0.1 0.0 gn: 12 11 2010-May-07 21:27:45 INFO3 from_mock: From MOCK: b2s1g0 rms:A 28.4 28.7 B 26.0 24.2 mn:A 0.1 -0.5 B 0.1 0.2 gn: 13 10 2010-May-07 21:27:45 INFO3 from_mock: From MOCK: b3s0g0 rms:A 30.6 30.5 B 33.4 29.8 mn:A 0.4 -0.2 B 0.1 -0.3 gn: 11 12 2010-May-07 21:27:45 INFO3 from_mock: From MOCK: b3s1g0 rms:A 29.1 28.4 B 25.3 26.3 mn:A 0.1 -0.2 B -0.2 0.2 gn: 10 10 2010-May-07 21:27:45 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.2 29.3 B 30.4 30.6 mn:A 0.4 -0.4 B -0.0 0.2 gn: 10 14 2010-May-07 21:27:45 INFO3 from_mock: From MOCK: b4s1g0 rms:A 29.5 26.7 B 30.4 29.2 mn:A -0.3 -0.8 B 0.5 -0.5 gn: 11 17 2010-May-07 21:27:46 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.1 28.7 B 31.4 31.3 mn:A 0.2 0.0 B -0.3 -0.3 gn: 10 10 2010-May-07 21:27:46 INFO3 from_mock: From MOCK: b5s1g0 rms:A 26.9 26.3 B 29.9 30.0 mn:A -0.1 -0.2 B 0.2 0.8 gn: 9 9 2010-May-07 21:27:46 INFO3 from_mock: From MOCK: b6s0g0 rms:A 30.6 27.9 B 29.6 30.1 mn:A -0.4 0.0 B -0.2 0.5 gn: 12 16 2010-May-07 21:27:46 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.6 27.9 B 30.0 29.4 mn:A -0.3 0.3 B 0.3 -0.3 gn: 13 17 2010-May-07 21:27:46 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2010-May-07 21:27:46 LOG5 end_task: Level: (5) ID = <10139> Status = 0 0 0 0 ok 2010-May-07 21:27:46 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2010-May-07 21:27:46 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2010-May-07 21:27:46 LOG5 finish_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2010-May-07 21:27:46 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2010-May-07 21:27:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 21:27:46 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2010-May-07 21:27:46 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2010-May-07 21:27:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-07 21:27:46 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2010-May-07 21:27:46 LOG5 finish_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-May-07 21:27:46 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2010-May-07 21:27:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 21:27:46 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2010-May-07 21:27:46 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-May-07 21:27:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-07 21:27:46 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-07 21:27:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-07 21:27:46 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-07 21:27:46 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2010-May-07 21:27:46 START begin_task: Starting task 'WAPP+Mock calibration' 2010-May-07 21:27:46 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2010-May-07 21:27:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2010-May-07 21:27:46 START begin_task: Starting task 'selecting calibration type' 2010-May-07 21:27:46 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2010-May-07 21:27:46 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-07 21:27:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-07 21:27:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:27:46 START begin_task: Starting task 'waiting on setcal' 2010-May-07 21:27:46 LOG5 begin_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2010-May-07 21:27:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-07 21:27:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-07 21:27:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:27:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:27:46 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-07 21:27:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-07 21:27:46 LOG5 end_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2010-May-07 21:27:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-07 21:27:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-07 21:27:46 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-07 21:27:46 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-07 21:27:46 LOG5 begin_task: Level: (5) ID = <10143> Status = 0 0 0 0 ok 2010-May-07 21:27:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:27:46 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-07 21:27:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-07 21:27:46 LOG5 end_task: Level: (5) ID = <10143> Status = 0 0 0 0 ok 2010-May-07 21:27:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-07 21:27:46 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-07 21:27:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-07 21:27:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-07 21:27:46 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-07 21:27:46 LOG5 begin_task: Level: (5) ID = <10144> Status = 0 0 0 0 ok 2010-May-07 21:27:46 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-07 21:27:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-07 21:27:46 LOG5 end_task: Level: (5) ID = <10144> Status = 0 0 0 0 ok 2010-May-07 21:27:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-07 21:27:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-07 21:27:46 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-07 21:27:46 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2010-May-07 21:27:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-07 21:27:46 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-07 21:27:46 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-07 21:27:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-07 21:27:46 LOG5 begin_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2010-May-07 21:27:47 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-07 21:27:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-07 21:27:47 NOTE WAPPDATA-new_file: New FITS file: wapp.20100507.a2048.0001.fits 2010-May-07 21:27:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-07 21:27:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-07 21:27:47 LOG5 end_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2010-May-07 21:27:47 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-07 21:27:47 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-May-07 21:27:47 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2010-May-07 21:27:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-07 21:27:47 LOG5 log_alfabeam: Parameters: 12.467666666666668 8.5973055555555575 12.064238 2010.3501554617587 46.399940 2010-May-07 21:27:47 LOG4 log_alfabeam: ALFABEAM 0 12.467666666666661 8.597305555555563 2010-May-07 21:27:47 LOG4 log_alfabeam: ALFABEAM 1 12.465610883630625 8.698309679546224 2010-May-07 21:27:47 LOG4 log_alfabeam: ALFABEAM 2 12.461365923993771 8.631686920465834 2010-May-07 21:27:47 LOG4 log_alfabeam: ALFABEAM 3 12.463367317708787 8.530430288764414 2010-May-07 21:27:47 LOG4 log_alfabeam: ALFABEAM 4 12.469693165425582 8.496115986371152 2010-May-07 21:27:47 LOG4 log_alfabeam: ALFABEAM 5 12.474002851705878 8.563621487813737 2010-May-07 21:27:47 LOG4 log_alfabeam: ALFABEAM 6 12.471922019843721 8.664555575544869 2010-May-07 21:27:47 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-May-07 21:27:47 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-May-07 21:27:47 LOG3 take_mock_data: PSET configuration: obsnm=RT 2010-May-07 21:27:47 LOG3 take_mock_data: PSET configuration: object=AGESVC1B_p2_017 2010-May-07 21:27:47 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-May-07 21:27:47 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-May-07 21:27:47 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-May-07 21:27:47 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-May-07 21:27:47 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-May-07 21:27:47 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-May-07 21:27:47 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2010-May-07 21:27:47 LOG3 take_mock_data: PSET configuration: scantype=ON 2010-May-07 21:27:47 LOG3 take_mock_data: PSET configuration: patternid=12700109 2010-May-07 21:27:47 LOG3 take_mock_data: PSET configuration: scanid=12700123 2010-May-07 21:27:47 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-May-07 21:27:47 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-May-07 21:27:47 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-May-07 21:27:47 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456152218.0 2010-May-07 21:27:47 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306152218.0 2010-May-07 21:27:47 LOG3 take_mock_data: PSET configuration: filetype=1 2010-May-07 21:27:47 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-May-07 21:27:47 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=RT:object=AGESVC1B_p2_017:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=12700109:scanid=12700123:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456152218.0:topobfreqhz=1306152218.0:filetype=1 2010-May-07 21:27:47 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-May-07 21:27:47 LOG5 begin_task: Level: (5) ID = <10147> Status = 0 0 0 0 ok 2010-May-07 21:27:47 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100507.a2048.0001.fits} 2010-May-07 21:27:47 LOG4 from_mock: From MOCK: psetok 2010-May-07 21:27:47 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-May-07 21:27:47 LOG5 end_task: Level: (5) ID = <10147> Status = 0 0 0 0 ok 2010-May-07 21:27:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-May-07 21:27:47 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-May-07 21:27:47 LOG3 socket_wait: To MOCK: STAR5 2010-May-07 21:27:47 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-May-07 21:27:47 LOG5 begin_task: Level: (5) ID = <10148> Status = 0 0 0 0 ok 2010-May-07 21:27:47 LOG4 from_mock: From MOCK: starok 2010-May-07 21:27:47 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-May-07 21:27:47 LOG5 end_task: Level: (5) ID = <10148> Status = 0 0 0 0 ok 2010-May-07 21:27:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-May-07 21:27:47 INFO2 take_data: Starting WAPP+Mock 5-second scan: 12700123 2010-May-07 21:27:47 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-May-07 21:27:47 LOG5 begin_task: Level: (5) ID = <10149> Status = 0 0 0 0 ok 2010-May-07 21:27:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:27:47 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-May-07 21:27:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-07 21:27:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5268.00 2010-May-07 21:27:47 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-May-07 21:27:49 INFO2 got_mock_message: Mock spectrometer start file number is 00000 2010-May-07 21:27:49 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-May-07 21:27:49 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2010-May-07 21:27:49 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2010-May-07 21:27:49 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-May-07 21:27:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-May-07 21:27:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-May-07 21:27:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-May-07 21:27:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-May-07 21:27:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-May-07 21:27:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-May-07 21:27:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-May-07 21:27:49 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-May-07 21:27:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2010-May-07 21:27:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2010-May-07 21:27:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2010-May-07 21:27:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2010-May-07 21:27:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2010-May-07 21:27:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2010-May-07 21:27:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2010-May-07 21:27:52 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 21:27:52.02 2010-May-07 21:27:52 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1273282072.02 Fri May 7 21:27:52 2010 2010-May-07 21:27:52 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-May-07 21:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.152218 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.152218 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.152218 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.152218 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.152218 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.152218 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.152218 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.152218 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.152218 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:27:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:27:58 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-May-07 21:27:58 INFO1 got_mock_message: From MOCK: DONE with observation 2010-May-07 21:27:58 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-May-07 21:27:58 LOG5 end_task: Level: (5) ID = <10149> Status = 0 0 0 0 ok 2010-May-07 21:27:58 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-May-07 21:27:58 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2010-May-07 21:27:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-07 21:27:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-07 21:27:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-07 21:27:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-07 21:27:58 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2010-May-07 21:27:58 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-07 21:27:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-07 21:27:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-07 21:27:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-07 21:27:58 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2010-May-07 21:27:58 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2010-May-07 21:27:58 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-May-07 21:27:58 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2010-May-07 21:27:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2010-May-07 21:27:58 LOG5 log_alfabeam: Parameters: 12.467666666666668 8.5973055555555575 12.067302 2010.3501558103278 46.399940 2010-May-07 21:27:58 LOG4 log_alfabeam: ALFABEAM 0 12.467666666666661 8.597305555555559 2010-May-07 21:27:58 LOG4 log_alfabeam: ALFABEAM 1 12.465632894941146 8.698407568140059 2010-May-07 21:27:58 LOG4 log_alfabeam: ALFABEAM 2 12.461373490475957 8.631989702819094 2010-May-07 21:27:58 LOG4 log_alfabeam: ALFABEAM 3 12.463352712130121 8.530637266107281 2010-May-07 21:27:58 LOG4 log_alfabeam: ALFABEAM 4 12.469671066390092 8.496019125467706 2010-May-07 21:27:58 LOG4 log_alfabeam: ALFABEAM 5 12.473995509742675 8.563318495874562 2010-May-07 21:27:58 LOG4 log_alfabeam: ALFABEAM 6 12.471936615779983 8.664351512060648 2010-May-07 21:27:58 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-May-07 21:27:58 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-May-07 21:27:58 LOG3 take_mock_data: PSET configuration: obsnm=RT 2010-May-07 21:27:58 LOG3 take_mock_data: PSET configuration: object=AGESVC1B_p2_017 2010-May-07 21:27:58 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-May-07 21:27:58 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-May-07 21:27:58 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-May-07 21:27:58 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-May-07 21:27:58 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-May-07 21:27:58 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-May-07 21:27:58 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2010-May-07 21:27:58 LOG3 take_mock_data: PSET configuration: scantype=OFF 2010-May-07 21:27:58 LOG3 take_mock_data: PSET configuration: patternid=12700109 2010-May-07 21:27:58 LOG3 take_mock_data: PSET configuration: scanid=12700124 2010-May-07 21:27:58 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-May-07 21:27:58 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-May-07 21:27:58 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-May-07 21:27:58 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456152218.0 2010-May-07 21:27:58 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306152218.0 2010-May-07 21:27:58 LOG3 take_mock_data: PSET configuration: filetype=1 2010-May-07 21:27:58 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-May-07 21:27:58 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=RT:object=AGESVC1B_p2_017:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=12700109:scanid=12700124:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456152218.0:topobfreqhz=1306152218.0:filetype=1 2010-May-07 21:27:58 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-May-07 21:27:58 LOG5 begin_task: Level: (5) ID = <10152> Status = 0 0 0 0 ok 2010-May-07 21:27:58 LOG4 from_mock: From MOCK: psetok 2010-May-07 21:27:58 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-May-07 21:27:58 LOG5 end_task: Level: (5) ID = <10152> Status = 0 0 0 0 ok 2010-May-07 21:27:58 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-May-07 21:27:58 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-May-07 21:27:58 LOG3 socket_wait: To MOCK: STAR5 2010-May-07 21:27:58 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-May-07 21:27:58 LOG5 begin_task: Level: (5) ID = <10153> Status = 0 0 0 0 ok 2010-May-07 21:27:58 LOG4 from_mock: From MOCK: starok 2010-May-07 21:27:58 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-May-07 21:27:58 LOG5 end_task: Level: (5) ID = <10153> Status = 0 0 0 0 ok 2010-May-07 21:27:58 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-May-07 21:27:58 INFO2 take_data: Starting WAPP+Mock 5-second scan: 12700124 2010-May-07 21:27:58 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-May-07 21:27:58 LOG5 begin_task: Level: (5) ID = <10154> Status = 0 0 0 0 ok 2010-May-07 21:27:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:27:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2010-May-07 21:27:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5279.00 2010-May-07 21:27:59 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-May-07 21:27:59 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-May-07 21:28:00 INFO2 got_mock_message: Mock spectrometer start file number is 00100 2010-May-07 21:28:00 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-May-07 21:28:00 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2010-May-07 21:28:00 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2010-May-07 21:28:00 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-May-07 21:28:00 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-May-07 21:28:00 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-May-07 21:28:00 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-May-07 21:28:00 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-May-07 21:28:00 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-May-07 21:28:00 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-May-07 21:28:00 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-May-07 21:28:00 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-May-07 21:28:00 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2010-May-07 21:28:00 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2010-May-07 21:28:00 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2010-May-07 21:28:00 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2010-May-07 21:28:00 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2010-May-07 21:28:00 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2010-May-07 21:28:01 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2010-May-07 21:28:04 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 21:28:04.01 2010-May-07 21:28:04 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1273282084.01 Fri May 7 21:28:04 2010 2010-May-07 21:28:04 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-May-07 21:28:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.152218 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:28:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.152218 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:28:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.152218 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:28:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.152218 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:28:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.152218 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:28:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.152218 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:28:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.152218 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:28:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.152218 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:28:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.152218 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:28:04 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2010-May-07 21:28:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:28:10 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-May-07 21:28:10 INFO1 got_mock_message: From MOCK: DONE with observation 2010-May-07 21:28:10 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-May-07 21:28:10 LOG5 end_task: Level: (5) ID = <10154> Status = 0 0 0 0 ok 2010-May-07 21:28:10 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-May-07 21:28:10 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2010-May-07 21:28:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-07 21:28:10 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2010-May-07 21:28:10 LOG5 finish_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2010-May-07 21:28:10 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2010-May-07 21:28:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 21:28:10 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2010-May-07 21:28:10 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2010-May-07 21:28:10 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2010-May-07 21:28:10 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 327.44 and ZA = 11.54 2010-May-07 21:28:10 LOG3 track_source: Calling 'track_source AGESVC1B_p2_017 327.44 11.5389512294 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-07 21:28:10 START begin_task: Starting task 'sending tracking commands' 2010-May-07 21:28:10 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-May-07 21:28:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_017} INFO {Slewing to source 'AGESVC1B_p2_017' ...} 2010-May-07 21:28:10 INFO1 track_source: Starting to track AGESVC1B_p2_017 2010-May-07 21:28:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_017" 2010-May-07 21:28:10 LOG3 vw_send: To DATATAKING: set ra 327.44 2010-May-07 21:28:10 LOG3 vw_send: To DATATAKING: set dec 11.5389512294 2010-May-07 21:28:10 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-07 21:28:10 LOG3 vw_send: To DATATAKING: pnt tr 327.44 11.5389512294 -CF 2010-May-07 21:28:10 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-07 21:28:10 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-07 21:28:10 LOG5 finish_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-May-07 21:28:10 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-07 21:28:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 21:28:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-07 21:28:10 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-May-07 21:28:10 LOG1 fixed_driftmap: Parameters: HA = -00:24:59.9 Start = 12:04:33.6 LST = 12:04:14.3 diff = 19.2 secs 2010-May-07 21:28:10 INFO2 fixed_driftmap: Waiting 17.2 seconds for RA 12:29:33 2010-May-07 21:28:10 INFO2 lstwait: Waiting for 17.2 secs from LST 12:04:14 to LST 12:04:32 ... 2010-May-07 21:28:10 LOG4 send_obs_status: To obs_status: <1> TASKTIME 17.193135256294287 BITMAP stat_wait MESSAGE {Waiting ...} 2010-May-07 21:28:10 START begin_task: Starting task 'waiting on wait on LST' 2010-May-07 21:28:10 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2010-May-07 21:28:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_017" 2010-May-07 21:28:10 LOG4 got_cormsg: From DATATAKING: set ra 327.44 2010-May-07 21:28:10 LOG4 got_cormsg: From DATATAKING: set dec 11.5389512294 2010-May-07 21:28:10 LOG4 got_cormsg: From DATATAKING: vw% 327.44 2010-May-07 21:28:10 LOG4 got_cormsg: From DATATAKING: vw% 11.5389512294 2010-May-07 21:28:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:28:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-07 21:28:10 LOG4 got_cormsg: From DATATAKING: pnt tr 327.44 11.5389512294 -CF 2010-May-07 21:28:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-07 21:28:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-07 21:28:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:28:27 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-May-07 21:28:27 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2010-May-07 21:28:27 LOG4 lstwait: Finished waiting 0.81 seconds late 2010-May-07 21:28:27 INFO3 lstwait: Finished waiting 2010-May-07 21:28:27 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-May-07 21:28:27 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2010-May-07 21:28:27 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-May-07 21:28:27 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2010-May-07 21:28:27 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-07 21:28:27 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-May-07 21:28:27 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2010-May-07 21:28:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-07 21:28:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-07 21:28:27 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-May-07 21:28:27 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-May-07 21:28:27 LOG3 take_mock_data: PSET configuration: obsnm=RT 2010-May-07 21:28:27 LOG3 take_mock_data: PSET configuration: object=AGESVC1B_p2_017 2010-May-07 21:28:27 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-May-07 21:28:27 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-May-07 21:28:27 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-May-07 21:28:27 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-May-07 21:28:27 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-May-07 21:28:27 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-May-07 21:28:27 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2010-May-07 21:28:27 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2010-May-07 21:28:27 LOG3 take_mock_data: PSET configuration: patternid=12700125 2010-May-07 21:28:27 LOG3 take_mock_data: PSET configuration: scanid=12700125 2010-May-07 21:28:27 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-May-07 21:28:27 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-May-07 21:28:27 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-May-07 21:28:27 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456152218.0 2010-May-07 21:28:27 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306152218.0 2010-May-07 21:28:27 LOG3 take_mock_data: PSET configuration: filetype=1 2010-May-07 21:28:27 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-May-07 21:28:27 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=RT:object=AGESVC1B_p2_017:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=12700125:scanid=12700125:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456152218.0:topobfreqhz=1306152218.0:filetype=1 2010-May-07 21:28:27 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-May-07 21:28:27 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2010-May-07 21:28:27 LOG4 from_mock: From MOCK: psetok 2010-May-07 21:28:27 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-May-07 21:28:27 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2010-May-07 21:28:28 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-May-07 21:28:28 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-May-07 21:28:28 LOG3 socket_wait: To MOCK: STAR1200 2010-May-07 21:28:28 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-May-07 21:28:28 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2010-May-07 21:28:28 LOG4 from_mock: From MOCK: starok 2010-May-07 21:28:28 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-May-07 21:28:28 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2010-May-07 21:28:28 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-May-07 21:28:28 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 12700125 2010-May-07 21:28:28 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-May-07 21:28:28 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2010-May-07 21:28:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 21:28:28 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-May-07 21:28:28 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-May-07 21:28:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-07 21:28:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5309.00 2010-May-07 21:28:30 INFO2 got_mock_message: Mock spectrometer start file number is 00200 2010-May-07 21:28:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.152218 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 21:28:30 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-May-07 21:28:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.152218 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:28:30 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2010-May-07 21:28:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.152218 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:28:30 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2010-May-07 21:28:30 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-May-07 21:28:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-May-07 21:28:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-May-07 21:28:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-May-07 21:28:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-May-07 21:28:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-May-07 21:28:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-May-07 21:28:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.152218 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:28:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-May-07 21:28:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.152218 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:28:30 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-May-07 21:28:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.16 GB 2010-May-07 21:28:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.152218 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:28:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.16 GB 2010-May-07 21:28:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.16 GB 2010-May-07 21:28:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.16 GB 2010-May-07 21:28:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.16 GB 2010-May-07 21:28:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.16 GB 2010-May-07 21:28:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.16 GB 2010-May-07 21:28:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.152218 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 21:28:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.152218 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 21:28:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.152218 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 21:28:33 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 21:28:33.01 2010-May-07 21:28:33 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1273282113.01 Fri May 7 21:28:33 2010 2010-May-07 21:28:33 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-May-07 21:28:49 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 21:28:49.304 (seconds: 77329.304)!} 2010-May-07 21:28:49 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 21:28:49.304 (seconds: 77329.304)! 2010-May-07 21:28:50 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 77328.0 to 77329.0! 2010-May-07 21:28:51 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (77328.0 - 77330.0)! 2010-May-07 21:48:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 21:48:34 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-May-07 21:48:34 INFO1 got_mock_message: From MOCK: DONE with observation 2010-May-07 21:48:34 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-May-07 21:48:34 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2010-May-07 21:48:34 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-May-07 21:48:34 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2010-May-07 21:48:34 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-May-07 21:48:34 LOG5 finish_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2010-May-07 21:48:34 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2010-May-07 21:48:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-07 21:48:34 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2010-May-07 21:48:34 LOG5 end_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2010-May-07 21:48:34 COMMAND run_command_line: EXECUTING command 36: 'ENDIF' 2010-May-07 21:48:34 COMMAND run_command_line: EXECUTING command 39: 'IF LSTSLEW(AGESVC2B_p2_019) < 122933 THEN' 2010-May-07 21:48:35 ERROR read_source: ERROR source 'AGESVC2B_p2_019' does not exist in catalog '/share/obs4/usr/a2048/AGESFull.cat'! 2010-May-07 21:48:35 ERROR is_if_valid: ERROR failed to find source 'AGESVC2B_p2_019' for function 'LSTSLEW(AGESVC2B_p2_019)'! 2010-May-07 21:48:35 LOG1 task_failed: Task 'running command file '100507.cmd'' failed! 2010-May-07 21:48:35 LOG5 task_failed: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2010-May-07 21:48:35 ALERT run_command_file: Stopping command file processing at line 39! 2010-May-07 21:48:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-May-07 21:48:35 STOP finish_task: Finishing task 'running command file '100507.cmd'' 2010-May-07 21:48:35 LOG5 finish_task: Level: (1) ID = <10101> Status = 0 0 0 1 failed 2010-May-07 21:48:35 ERROR finish_task: ERROR failed running: command file '100507.cmd' 2010-May-07 21:48:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-May-07 21:48:35 END end_task: Finishing task 'running command file '100507.cmd'' with status 'FAILED' 2010-May-07 21:48:35 LOG5 end_task: Level: (1) ID = <10101> Status = 0 0 0 1 failed 2010-May-07 21:49:23 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-May-07 21:49:23 LOG4 exec_msg: From OBSERVER: run_command_file 100507.cmd 44 1 25 2010-May-07 21:49:23 LOG4 run_command_file: Calling 'run_command_file 100507.cmd 44 1 25' 2010-May-07 21:49:23 BEGIN begin_task: Starting task 'running command file '100507.cmd'' 2010-May-07 21:49:23 LOG5 begin_task: Level: (1) ID = <10161> Status = 0 0 0 0 ok 2010-May-07 21:49:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100507.cmd' ...} 2010-May-07 21:49:23 NOTE run_command_file: Starting execution of command file '100507.cmd' from line 44 2010-May-07 21:49:23 COMMAND run_command_line: EXECUTING command 46: 'IF LSTSLEW(AGESVC1B_p2_021) < 125433 THEN' 2010-May-07 21:49:23 LOG3 is_if_valid: Current source data: up 354.2 10.0 UP - - 74 1.1 2010-May-07 21:49:23 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1B_p2_021) < 125433 2010-May-07 21:49:23 INFO5 is_if_valid: Condition parsed as: 12.443557333333333 < 12.909166666666668 2010-May-07 21:49:23 COMMAND run_command_line: EXECUTING command 47: 'FIXEDDRIFT az=32.30 alfaangle=-8.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_021 ra=122900.00 dec=83000.00' 2010-May-07 21:49:23 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-May-07 21:49:24 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-07 21:49:24 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 32.30 -8.0 hcorcal 5 tracking no off lcorcal first 1 AGESVC1B_p2_021 122900.00 83000.00 J 8500.0 Heliocentric velocity(optical)' 2010-May-07 21:49:24 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-May-07 21:49:24 LOG5 begin_task: Level: (2) ID = <10162> Status = 0 0 0 0 ok 2010-May-07 21:49:24 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGESVC1B_p2_017' 2010-May-07 21:49:24 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-May-07 21:49:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p2_021} 2010-May-07 21:49:24 INFO3 fixed_driftmap: Sending telescope to Az = 32.30 and ZA = 11.62 2010-May-07 21:49:24 LOG3 track_source: Calling 'track_source AGESVC1B_p2_021 32.30 11.6242579831 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-07 21:49:24 START begin_task: Starting task 'sending tracking commands' 2010-May-07 21:49:24 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2010-May-07 21:49:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_021} INFO {Slewing to source 'AGESVC1B_p2_021' ...} 2010-May-07 21:49:24 INFO1 track_source: Starting to track AGESVC1B_p2_021 2010-May-07 21:49:24 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_021" 2010-May-07 21:49:24 LOG3 vw_send: To DATATAKING: set ra 32.30 2010-May-07 21:49:24 LOG3 vw_send: To DATATAKING: set dec 11.6242579831 2010-May-07 21:49:24 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-07 21:49:24 LOG3 vw_send: To DATATAKING: pnt tr 32.30 11.6242579831 -CF 2010-May-07 21:49:24 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-07 21:49:24 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-07 21:49:24 LOG5 finish_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2010-May-07 21:49:24 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-07 21:49:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 21:49:24 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-07 21:49:24 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2010-May-07 21:49:24 START begin_task: Starting task 'rotate ALFA to -8 degrees' 2010-May-07 21:49:24 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2010-May-07 21:49:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -8 degrees ...} 2010-May-07 21:49:24 INFO2 rotate_alfa: ALFA commanded to -8.0 degrees 2010-May-07 21:49:24 LOG3 sock_errsend: To ALFAMOTOR: POSITION -8.0 REPLY 2010-May-07 21:49:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-May-07 21:49:24 START begin_task: Starting task 'waiting on ALFA rotation' 2010-May-07 21:49:24 LOG5 begin_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2010-May-07 21:49:24 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_021" 2010-May-07 21:49:24 LOG4 got_cormsg: From DATATAKING: set ra 32.30 2010-May-07 21:49:24 LOG4 got_cormsg: From DATATAKING: set dec 11.6242579831 2010-May-07 21:49:24 LOG4 got_cormsg: From DATATAKING: vw% 32.30 2010-May-07 21:49:24 LOG4 got_cormsg: From DATATAKING: vw% 11.6242579831 2010-May-07 21:49:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:49:24 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-07 21:49:24 LOG4 got_cormsg: From DATATAKING: pnt tr 32.30 11.6242579831 -CF 2010-May-07 21:49:24 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-07 21:49:24 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-07 21:49:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:49:56 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-May-07 21:49:56 INFO3 alfa_motor: ALFA rotator in-position -8.00 degrees 2010-May-07 21:49:56 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-May-07 21:49:56 LOG5 end_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2010-May-07 21:49:56 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-07 21:49:56 STOP finish_task: Finishing task 'rotate ALFA to -8 degrees' 2010-May-07 21:49:56 LOG5 finish_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2010-May-07 21:49:56 INFO2 finish_task: DONE finished configuration: rotating ALFA to -8 degrees 2010-May-07 21:49:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 21:49:56 STOP end_task: Finishing task 'rotate ALFA to -8 degrees' with status 'OK' 2010-May-07 21:49:56 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2010-May-07 21:49:56 START begin_task: Starting task 'waiting on telescope' 2010-May-07 21:49:56 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2010-May-07 21:49:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-07 21:49:56 LOG3 waittrk: Start waittrk 5 2010-May-07 21:49:56 START begin_task: Starting task 'waiting on telescope movement' 2010-May-07 21:49:56 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2010-May-07 21:50:01 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-07 21:50:01 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2010-May-07 21:50:01 START begin_task: Starting task 'waiting on telescope on source' 2010-May-07 21:50:01 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2010-May-07 21:52:16 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-07 21:52:16 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2010-May-07 21:52:16 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-07 21:52:16 INFO2 waittrk: Now tracking AGESVC1B_p2_021 2010-May-07 21:52:16 LOG4 waittrk: Current telescope position: Az = 392.04 ZA = 11.60 2010-May-07 21:52:16 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-07 21:52:16 LOG5 finish_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2010-May-07 21:52:16 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-07 21:52:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 21:52:16 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-07 21:52:16 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2010-May-07 21:52:16 START begin_task: Starting task 'selecting calibration type' 2010-May-07 21:52:16 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2010-May-07 21:52:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-07 21:52:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-07 21:52:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:52:16 START begin_task: Starting task 'waiting on setcal' 2010-May-07 21:52:16 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2010-May-07 21:52:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-07 21:52:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-07 21:52:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:52:17 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-07 21:52:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-07 21:52:17 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2010-May-07 21:52:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-07 21:52:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-07 21:52:17 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-07 21:52:17 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-07 21:52:17 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2010-May-07 21:52:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 21:52:17 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-07 21:52:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-07 21:52:17 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2010-May-07 21:52:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-07 21:52:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-07 21:52:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-07 21:52:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-07 21:52:18 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-07 21:52:18 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2010-May-07 21:52:18 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-07 21:52:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-07 21:52:18 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2010-May-07 21:52:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-07 21:52:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-07 21:52:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-07 21:52:18 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2010-May-07 21:52:18 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2010-May-07 21:52:18 INFO2 astwait: Waiting for 1502 seconds from 01:52:18 to 02:17:20 UTC ... 2010-May-07 21:52:18 LOG4 send_obs_status: To obs_status: <1> TASKTIME 1502 BITMAP stat_wait MESSAGE {Waiting ...} 2010-May-07 21:52:18 START begin_task: Starting task 'waiting on waiting for AST time' 2010-May-07 21:52:18 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-May-07 21:58:47 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 21:58:47.296 (seconds: 79127.296)!} 2010-May-07 21:58:47 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 21:58:47.296 (seconds: 79127.296)! 2010-May-07 22:17:20 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2010-May-07 22:17:20 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-May-07 22:17:20 INFO3 astwait: Finished waiting 2010-May-07 22:17:20 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-May-07 22:17:20 LOG5 dopset_later: Calling 'dopset_later 60.65425141137878' 2010-May-07 22:17:20 INFO3 dopset_later: Setting Doppler correction for 22:18:20 (60.7 seconds from now) 2010-May-07 22:17:20 LOG5 antvel: Calling 'antvel 32.300000 11.624258 F Heliocentric 60.65425141137878' 2010-May-07 22:17:20 LOG2 antvel: Transforming current Az = 32.30 ZA = 11.62 to apparent RA = 12:29:33.3 Dec = +08:26:24.4 2010-May-07 22:17:20 LOG2 antvel: Parameters to Doppler: Heliocentric 94700 2010 127 0.0 2010-May-07 22:17:20 INFO5 antvel: Computed antenna velocity: +19.89657 km/s 2010-May-07 22:17:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=19.8965726568 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-May-07 22:17:20 INFO4 dopset_gen: New sky frequencies: 1381.151765 1381.151765 1381.151765 1381.151765 1381.151765 1381.151765 1381.151765 1381.151765 1381.151765 2010-May-07 22:17:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.151765 sky0=1381.151765 sky1=1381.151765 sky2=1381.151765 sky3=1381.151765 sky4=1381.151765 sky5=1381.151765 sky6=1381.151765 sky7=1381.151765 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-07 22:17:20 LOG2 dopset_gen: Result from 'sky2syn': 1631.151765 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-07 22:17:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631151765.0} 2010-May-07 22:17:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 22:17:20 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2010-May-07 22:17:20 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2010-May-07 22:17:20 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:28:04.1 Dec = +08:29:50.2 2010-May-07 22:17:20 LOG3 track_source: Calling 'track_source AGESVC1B_p2_021 122804.1 082950.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-07 22:17:20 START begin_task: Starting task 'sending tracking commands' 2010-May-07 22:17:20 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2010-May-07 22:17:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_021} INFO {Slewing to source 'AGESVC1B_p2_021' ...} 2010-May-07 22:17:20 INFO1 track_source: Starting to track AGESVC1B_p2_021 2010-May-07 22:17:20 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_021" 2010-May-07 22:17:20 LOG3 vw_send: To DATATAKING: set ra 122804.1 2010-May-07 22:17:20 LOG3 vw_send: To DATATAKING: set dec 082950.2 2010-May-07 22:17:20 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-07 22:17:20 LOG3 vw_send: To DATATAKING: pnt tr 122804.1 082950.2 -CJ 2010-May-07 22:17:20 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-07 22:17:20 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-07 22:17:20 LOG5 finish_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2010-May-07 22:17:20 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-07 22:17:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 22:17:20 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-07 22:17:20 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2010-May-07 22:17:20 START begin_task: Starting task 'waiting on telescope' 2010-May-07 22:17:20 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2010-May-07 22:17:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-07 22:17:20 LOG3 waittrk: Start waittrk 5 2010-May-07 22:17:20 START begin_task: Starting task 'waiting on telescope movement' 2010-May-07 22:17:20 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2010-May-07 22:17:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631151765.0} 2010-May-07 22:17:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-07 22:17:20 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_021" 2010-May-07 22:17:20 LOG4 got_cormsg: From DATATAKING: set ra 122804.1 2010-May-07 22:17:20 LOG4 got_cormsg: From DATATAKING: set dec 082950.2 2010-May-07 22:17:20 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-07 22:17:20 LOG4 got_cormsg: From DATATAKING: pnt tr 122804.1 082950.2 -CJ 2010-May-07 22:17:20 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-07 22:17:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 22:17:22 LOG4 got_cormsg: From DATATAKING: vw% vw% 122804.1 2010-May-07 22:17:22 LOG4 got_cormsg: From DATATAKING: vw% 082950.2 2010-May-07 22:17:22 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2010-May-07 22:17:25 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-07 22:17:25 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2010-May-07 22:17:25 START begin_task: Starting task 'waiting on telescope on source' 2010-May-07 22:17:25 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2010-May-07 22:17:25 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-07 22:17:25 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2010-May-07 22:17:25 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-07 22:17:25 INFO2 waittrk: Now tracking AGESVC1B_p2_021 2010-May-07 22:17:25 LOG4 waittrk: Current telescope position: Az = 392.07 ZA = 11.61 2010-May-07 22:17:25 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-07 22:17:25 LOG5 finish_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2010-May-07 22:17:25 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-07 22:17:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 22:17:25 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-07 22:17:25 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2010-May-07 22:17:25 START begin_task: Starting task 'adjusting WAPP+Mock power' 2010-May-07 22:17:25 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2010-May-07 22:17:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2010-May-07 22:17:25 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2010-May-07 22:17:25 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-May-07 22:17:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-May-07 22:17:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-07 22:17:25 START begin_task: Starting task 'waiting on adjpwrif2' 2010-May-07 22:17:25 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2010-May-07 22:17:26 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-May-07 22:17:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-07 22:17:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 22:17:28 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-07 22:17:28 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-May-07 22:17:28 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2010-May-07 22:17:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-May-07 22:17:28 START begin_task: Starting task 'adjusting WAPP power' 2010-May-07 22:17:28 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2010-May-07 22:17:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-07 22:17:28 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-May-07 22:17:28 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-May-07 22:17:28 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-May-07 22:17:28 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-May-07 22:17:28 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-May-07 22:17:28 LOG5 begin_task: Level: (5) ID = <10181> Status = 0 0 0 0 ok 2010-May-07 22:17:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-May-07 22:17:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 22:17:29 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-May-07 22:17:29 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 5 dB 2010-May-07 22:17:29 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 4 3 dB 2010-May-07 22:17:29 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-May-07 22:17:29 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-May-07 22:17:29 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-May-07 22:17:29 LOG5 end_task: Level: (5) ID = <10181> Status = 0 0 0 0 ok 2010-May-07 22:17:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.004 0.999 ALFA beam 1: 1.081 1.079 2010-May-07 22:17:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.995 0.960 ALFA beam 3: 0.952 1.047 2010-May-07 22:17:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.955 0.944 ALFA beam 5: 1.002 1.040 2010-May-07 22:17:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.026 0.961 ALFA beam 7: 1.114 1.119 2010-May-07 22:17:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-07 22:17:29 LOG5 finish_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2010-May-07 22:17:29 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-May-07 22:17:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 22:17:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-07 22:17:29 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2010-May-07 22:17:29 START begin_task: Starting task 'adjusting Mock spectrometer power' 2010-May-07 22:17:29 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2010-May-07 22:17:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-07 22:17:29 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2010-May-07 22:17:29 LOG3 socket_wait: To MOCK: ADJP30 2010-May-07 22:17:29 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2010-May-07 22:17:29 LOG5 begin_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2010-May-07 22:17:35 INFO3 from_mock: From MOCK: b0s0g0 rms:A 30.4 26.8 B 29.5 29.4 mn:A -0.3 -0.7 B -0.8 -0.8 gn: 9 10 2010-May-07 22:17:35 INFO3 from_mock: From MOCK: b0s1g0 rms:A 30.3 29.1 B 30.5 32.3 mn:A 0.9 -0.8 B 0.2 0.4 gn: 10 11 2010-May-07 22:17:35 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.8 29.9 B 33.1 29.8 mn:A -0.1 0.5 B 0.1 1.4 gn: 9 10 2010-May-07 22:17:35 INFO3 from_mock: From MOCK: b1s1g0 rms:A 32.3 29.7 B 29.7 29.7 mn:A -0.1 0.4 B -0.6 -0.1 gn: 10 9 2010-May-07 22:17:35 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.6 28.7 B 28.3 29.4 mn:A -0.0 -0.1 B -0.1 0.1 gn: 12 11 2010-May-07 22:17:35 INFO3 from_mock: From MOCK: b2s1g0 rms:A 31.1 31.5 B 32.3 30.0 mn:A 0.1 -0.5 B -0.0 0.2 gn: 14 12 2010-May-07 22:17:35 INFO3 from_mock: From MOCK: b3s0g0 rms:A 30.5 30.5 B 33.5 29.8 mn:A 0.4 -0.1 B 0.1 -0.4 gn: 11 12 2010-May-07 22:17:35 INFO3 from_mock: From MOCK: b3s1g0 rms:A 31.9 31.1 B 28.1 29.3 mn:A 0.0 -0.2 B -0.3 0.1 gn: 11 11 2010-May-07 22:17:35 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.6 29.7 B 30.5 30.7 mn:A 0.3 -0.4 B -0.0 0.3 gn: 10 14 2010-May-07 22:17:35 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.8 29.7 B 30.0 28.8 mn:A -0.3 -0.9 B 0.5 -0.6 gn: 12 17 2010-May-07 22:17:35 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.6 29.2 B 31.5 31.4 mn:A 0.1 0.0 B -0.2 -0.3 gn: 10 10 2010-May-07 22:17:35 INFO3 from_mock: From MOCK: b5s1g0 rms:A 30.1 29.4 B 29.5 29.6 mn:A -0.1 -0.2 B 0.2 0.9 gn: 10 9 2010-May-07 22:17:35 INFO3 from_mock: From MOCK: b6s0g0 rms:A 31.9 29.0 B 30.2 30.6 mn:A -0.4 -0.0 B -0.2 0.5 gn: 12 16 2010-May-07 22:17:35 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.8 28.1 B 29.9 29.3 mn:A -0.4 0.3 B 0.2 -0.3 gn: 13 17 2010-May-07 22:17:35 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2010-May-07 22:17:35 LOG5 end_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2010-May-07 22:17:35 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2010-May-07 22:17:35 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2010-May-07 22:17:35 LOG5 finish_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2010-May-07 22:17:35 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2010-May-07 22:17:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 22:17:35 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2010-May-07 22:17:35 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2010-May-07 22:17:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-07 22:17:35 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2010-May-07 22:17:35 LOG5 finish_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2010-May-07 22:17:35 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2010-May-07 22:17:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 22:17:35 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2010-May-07 22:17:35 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2010-May-07 22:17:35 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2010-May-07 22:17:35 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2010-May-07 22:17:35 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2010-May-07 22:17:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2010-May-07 22:17:35 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2010-May-07 22:17:35 START begin_task: Starting task 'WAPP+Mock calibration' 2010-May-07 22:17:35 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-May-07 22:17:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2010-May-07 22:17:35 START begin_task: Starting task 'selecting calibration type' 2010-May-07 22:17:35 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2010-May-07 22:17:35 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-07 22:17:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-07 22:17:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-07 22:17:35 START begin_task: Starting task 'waiting on setcal' 2010-May-07 22:17:35 LOG5 begin_task: Level: (5) ID = <10186> Status = 0 0 0 0 ok 2010-May-07 22:17:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2010-May-07 22:17:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-07 22:17:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-07 22:17:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 22:17:35 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-07 22:17:35 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-07 22:17:35 LOG5 end_task: Level: (5) ID = <10186> Status = 0 0 0 0 ok 2010-May-07 22:17:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-07 22:17:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-07 22:17:35 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-07 22:17:35 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-07 22:17:35 LOG5 begin_task: Level: (5) ID = <10187> Status = 0 0 0 0 ok 2010-May-07 22:17:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 22:17:35 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-07 22:17:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-07 22:17:35 LOG5 end_task: Level: (5) ID = <10187> Status = 0 0 0 0 ok 2010-May-07 22:17:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-07 22:17:36 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-07 22:17:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-07 22:17:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-07 22:17:36 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-07 22:17:36 LOG5 begin_task: Level: (5) ID = <10188> Status = 0 0 0 0 ok 2010-May-07 22:17:36 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-07 22:17:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-07 22:17:36 LOG5 end_task: Level: (5) ID = <10188> Status = 0 0 0 0 ok 2010-May-07 22:17:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-07 22:17:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-07 22:17:36 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-07 22:17:36 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2010-May-07 22:17:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-07 22:17:36 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-07 22:17:36 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-07 22:17:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-07 22:17:36 LOG5 begin_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2010-May-07 22:17:36 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-07 22:17:36 NOTE WAPPDATA-new_file: New FITS file: wapp.20100507.a2048.0002.fits 2010-May-07 22:17:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-07 22:17:36 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100507.a2048.0002.fits} 2010-May-07 22:17:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-07 22:17:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-07 22:17:36 LOG5 end_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2010-May-07 22:17:36 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-07 22:17:36 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-May-07 22:17:36 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2010-May-07 22:17:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-07 22:17:36 LOG5 log_alfabeam: Parameters: 12.467805555555557 8.4972777777777768 12.896789 2010.3502501774533 -8.000012 2010-May-07 22:17:36 LOG4 log_alfabeam: ALFABEAM 0 12.467805555555564 8.497277777777771 2010-May-07 22:17:36 LOG4 log_alfabeam: ALFABEAM 1 12.467508025403294 8.598224225841172 2010-May-07 22:17:36 LOG4 log_alfabeam: ALFABEAM 2 12.462068047496608 8.531619838833288 2010-May-07 22:17:36 LOG4 log_alfabeam: ALFABEAM 3 12.462374352291235 8.430416769009183 2010-May-07 22:17:36 LOG4 log_alfabeam: ALFABEAM 4 12.468158467964379 8.396147644376066 2010-May-07 22:17:36 LOG4 log_alfabeam: ALFABEAM 5 12.473553034524629 8.463628136266699 2010-May-07 22:17:36 LOG4 log_alfabeam: ALFABEAM 6 12.473209007638527 8.564502766898393 2010-May-07 22:17:36 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-May-07 22:17:36 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-May-07 22:17:36 LOG3 take_mock_data: PSET configuration: obsnm=RT 2010-May-07 22:17:36 LOG3 take_mock_data: PSET configuration: object=AGESVC1B_p2_021 2010-May-07 22:17:36 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-May-07 22:17:36 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-May-07 22:17:36 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-May-07 22:17:36 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-May-07 22:17:36 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-May-07 22:17:36 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-May-07 22:17:36 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2010-May-07 22:17:36 LOG3 take_mock_data: PSET configuration: scantype=ON 2010-May-07 22:17:36 LOG3 take_mock_data: PSET configuration: patternid=12700125 2010-May-07 22:17:36 LOG3 take_mock_data: PSET configuration: scanid=12700126 2010-May-07 22:17:36 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-May-07 22:17:36 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-May-07 22:17:36 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-May-07 22:17:36 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456151765.0 2010-May-07 22:17:36 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306151765.0 2010-May-07 22:17:36 LOG3 take_mock_data: PSET configuration: filetype=1 2010-May-07 22:17:36 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-May-07 22:17:36 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=RT:object=AGESVC1B_p2_021:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=12700125:scanid=12700126:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456151765.0:topobfreqhz=1306151765.0:filetype=1 2010-May-07 22:17:36 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-May-07 22:17:36 LOG5 begin_task: Level: (5) ID = <10191> Status = 0 0 0 0 ok 2010-May-07 22:17:36 LOG4 from_mock: From MOCK: psetok 2010-May-07 22:17:36 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-May-07 22:17:36 LOG5 end_task: Level: (5) ID = <10191> Status = 0 0 0 0 ok 2010-May-07 22:17:36 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-May-07 22:17:36 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-May-07 22:17:36 LOG3 socket_wait: To MOCK: STAR5 2010-May-07 22:17:36 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-May-07 22:17:36 LOG5 begin_task: Level: (5) ID = <10192> Status = 0 0 0 0 ok 2010-May-07 22:17:36 LOG4 from_mock: From MOCK: starok 2010-May-07 22:17:36 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-May-07 22:17:36 LOG5 end_task: Level: (5) ID = <10192> Status = 0 0 0 0 ok 2010-May-07 22:17:36 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-May-07 22:17:36 INFO2 take_data: Starting WAPP+Mock 5-second scan: 12700126 2010-May-07 22:17:37 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-May-07 22:17:37 LOG5 begin_task: Level: (5) ID = <10193> Status = 0 0 0 0 ok 2010-May-07 22:17:37 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-May-07 22:17:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 22:17:37 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-May-07 22:17:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-07 22:17:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8258.00 2010-May-07 22:17:38 INFO2 got_mock_message: Mock spectrometer start file number is 00300 2010-May-07 22:17:38 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-May-07 22:17:38 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2010-May-07 22:17:38 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2010-May-07 22:17:38 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-May-07 22:17:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-May-07 22:17:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-May-07 22:17:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-May-07 22:17:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-May-07 22:17:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-May-07 22:17:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-May-07 22:17:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-May-07 22:17:38 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-May-07 22:17:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2010-May-07 22:17:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2010-May-07 22:17:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2010-May-07 22:17:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2010-May-07 22:17:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2010-May-07 22:17:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2010-May-07 22:17:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2010-May-07 22:17:41 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 22:17:41.01 2010-May-07 22:17:41 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1273285061.01 Fri May 7 22:17:41 2010 2010-May-07 22:17:41 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-May-07 22:17:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.151765 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 22:17:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.151765 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 22:17:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.151765 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 22:17:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.151765 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 22:17:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.151765 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 22:17:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.151765 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 22:17:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.151765 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 22:17:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.151765 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 22:17:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.151765 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 22:17:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 22:17:47 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-May-07 22:17:47 INFO1 got_mock_message: From MOCK: DONE with observation 2010-May-07 22:17:47 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-May-07 22:17:47 LOG5 end_task: Level: (5) ID = <10193> Status = 0 0 0 0 ok 2010-May-07 22:17:47 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-May-07 22:17:47 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2010-May-07 22:17:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-07 22:17:47 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-07 22:17:47 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-07 22:17:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-07 22:17:47 LOG5 begin_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2010-May-07 22:17:47 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-07 22:17:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-07 22:17:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-07 22:17:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-07 22:17:47 LOG5 end_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2010-May-07 22:17:47 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2010-May-07 22:17:47 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-May-07 22:17:47 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2010-May-07 22:17:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2010-May-07 22:17:47 LOG5 log_alfabeam: Parameters: 12.467805555555557 8.4972777777777768 12.899853 2010.3502505260221 -8.000012 2010-May-07 22:17:47 LOG4 log_alfabeam: ALFABEAM 0 12.467805555555559 8.497277777777777 2010-May-07 22:17:47 LOG4 log_alfabeam: ALFABEAM 1 12.467529557218498 8.598237914594650 2010-May-07 22:17:47 LOG4 log_alfabeam: ALFABEAM 2 12.462075405417806 8.531888902945722 2010-May-07 22:17:47 LOG4 log_alfabeam: ALFABEAM 3 12.462360116156166 8.430672267954565 2010-May-07 22:17:47 LOG4 log_alfabeam: ALFABEAM 4 12.468136793001529 8.396131736020058 2010-May-07 22:17:47 LOG4 log_alfabeam: ALFABEAM 5 12.473545798774992 8.463357127454378 2010-May-07 22:17:47 LOG4 log_alfabeam: ALFABEAM 6 12.473223384340182 8.564247780319699 2010-May-07 22:17:47 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-May-07 22:17:47 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-May-07 22:17:47 LOG3 take_mock_data: PSET configuration: obsnm=RT 2010-May-07 22:17:47 LOG3 take_mock_data: PSET configuration: object=AGESVC1B_p2_021 2010-May-07 22:17:47 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-May-07 22:17:47 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-May-07 22:17:47 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-May-07 22:17:47 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-May-07 22:17:47 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-May-07 22:17:47 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-May-07 22:17:47 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2010-May-07 22:17:47 LOG3 take_mock_data: PSET configuration: scantype=OFF 2010-May-07 22:17:47 LOG3 take_mock_data: PSET configuration: patternid=12700125 2010-May-07 22:17:47 LOG3 take_mock_data: PSET configuration: scanid=12700127 2010-May-07 22:17:47 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-May-07 22:17:47 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-May-07 22:17:47 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-May-07 22:17:47 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456151765.0 2010-May-07 22:17:47 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306151765.0 2010-May-07 22:17:47 LOG3 take_mock_data: PSET configuration: filetype=1 2010-May-07 22:17:47 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-May-07 22:17:47 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=RT:object=AGESVC1B_p2_021:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=12700125:scanid=12700127:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456151765.0:topobfreqhz=1306151765.0:filetype=1 2010-May-07 22:17:47 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-May-07 22:17:47 LOG5 begin_task: Level: (5) ID = <10196> Status = 0 0 0 0 ok 2010-May-07 22:17:47 LOG4 from_mock: From MOCK: psetok 2010-May-07 22:17:47 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-May-07 22:17:47 LOG5 end_task: Level: (5) ID = <10196> Status = 0 0 0 0 ok 2010-May-07 22:17:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-May-07 22:17:47 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-May-07 22:17:47 LOG3 socket_wait: To MOCK: STAR5 2010-May-07 22:17:47 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-May-07 22:17:47 LOG5 begin_task: Level: (5) ID = <10197> Status = 0 0 0 0 ok 2010-May-07 22:17:47 LOG4 from_mock: From MOCK: starok 2010-May-07 22:17:47 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-May-07 22:17:47 LOG5 end_task: Level: (5) ID = <10197> Status = 0 0 0 0 ok 2010-May-07 22:17:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-May-07 22:17:47 INFO2 take_data: Starting WAPP+Mock 5-second scan: 12700127 2010-May-07 22:17:47 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-May-07 22:17:47 LOG5 begin_task: Level: (5) ID = <10198> Status = 0 0 0 0 ok 2010-May-07 22:17:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 22:17:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2010-May-07 22:17:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8268.00 2010-May-07 22:17:48 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-May-07 22:17:48 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-May-07 22:17:49 INFO2 got_mock_message: Mock spectrometer start file number is 00400 2010-May-07 22:17:49 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-May-07 22:17:49 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2010-May-07 22:17:49 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2010-May-07 22:17:49 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-May-07 22:17:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-May-07 22:17:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-May-07 22:17:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-May-07 22:17:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-May-07 22:17:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-May-07 22:17:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-May-07 22:17:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-May-07 22:17:49 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-May-07 22:17:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2010-May-07 22:17:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2010-May-07 22:17:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2010-May-07 22:17:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2010-May-07 22:17:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2010-May-07 22:17:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2010-May-07 22:17:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2010-May-07 22:17:52 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 22:17:52.00 2010-May-07 22:17:52 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1273285072.00 Fri May 7 22:17:52 2010 2010-May-07 22:17:52 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-May-07 22:17:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.151765 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 22:17:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.151765 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 22:17:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.151765 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 22:17:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.151765 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 22:17:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.151765 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 22:17:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.151765 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 22:17:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.151765 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 22:17:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.151765 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 22:17:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.151765 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 22:17:53 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2010-May-07 22:17:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 22:17:58 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-May-07 22:17:58 INFO1 got_mock_message: From MOCK: DONE with observation 2010-May-07 22:17:58 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-May-07 22:17:58 LOG5 end_task: Level: (5) ID = <10198> Status = 0 0 0 0 ok 2010-May-07 22:17:58 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-May-07 22:17:58 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2010-May-07 22:17:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-07 22:17:58 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2010-May-07 22:17:58 LOG5 finish_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-May-07 22:17:58 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2010-May-07 22:17:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 22:17:58 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2010-May-07 22:17:58 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-May-07 22:17:58 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2010-May-07 22:17:58 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 32.30 and ZA = 11.62 2010-May-07 22:17:58 LOG3 track_source: Calling 'track_source AGESVC1B_p2_021 32.30 11.6242579831 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-May-07 22:17:58 START begin_task: Starting task 'sending tracking commands' 2010-May-07 22:17:58 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2010-May-07 22:17:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_021} INFO {Slewing to source 'AGESVC1B_p2_021' ...} 2010-May-07 22:17:58 INFO1 track_source: Starting to track AGESVC1B_p2_021 2010-May-07 22:17:58 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_021" 2010-May-07 22:17:58 LOG3 vw_send: To DATATAKING: set ra 32.30 2010-May-07 22:17:58 LOG3 vw_send: To DATATAKING: set dec 11.6242579831 2010-May-07 22:17:58 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-07 22:17:58 LOG3 vw_send: To DATATAKING: pnt tr 32.30 11.6242579831 -CF 2010-May-07 22:17:58 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-May-07 22:17:58 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-07 22:17:58 LOG5 finish_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2010-May-07 22:17:58 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-07 22:17:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-07 22:17:58 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-07 22:17:58 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2010-May-07 22:17:58 LOG1 fixed_driftmap: Parameters: HA = +00:24:59.7 Start = 12:54:33.2 LST = 12:54:10.5 diff = 22.7 secs 2010-May-07 22:17:58 INFO2 fixed_driftmap: Waiting 20.7 seconds for RA 12:29:33 2010-May-07 22:17:58 INFO2 lstwait: Waiting for 20.7 secs from LST 12:54:11 to LST 12:54:31 ... 2010-May-07 22:17:58 LOG4 send_obs_status: To obs_status: <1> TASKTIME 20.661347004339529 BITMAP stat_wait MESSAGE {Waiting ...} 2010-May-07 22:17:58 START begin_task: Starting task 'waiting on wait on LST' 2010-May-07 22:17:58 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2010-May-07 22:17:58 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_021" 2010-May-07 22:17:58 LOG4 got_cormsg: From DATATAKING: set ra 32.30 2010-May-07 22:17:58 LOG4 got_cormsg: From DATATAKING: set dec 11.6242579831 2010-May-07 22:17:58 LOG4 got_cormsg: From DATATAKING: vw% 32.30 2010-May-07 22:17:58 LOG4 got_cormsg: From DATATAKING: vw% 11.6242579831 2010-May-07 22:17:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 22:17:58 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-07 22:17:58 LOG4 got_cormsg: From DATATAKING: pnt tr 32.30 11.6242579831 -CF 2010-May-07 22:17:58 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-May-07 22:17:58 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-07 22:17:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 22:18:19 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-May-07 22:18:19 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2010-May-07 22:18:19 LOG4 lstwait: Finished waiting 0.34 seconds late 2010-May-07 22:18:19 INFO3 lstwait: Finished waiting 2010-May-07 22:18:19 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-May-07 22:18:19 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2010-May-07 22:18:19 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-May-07 22:18:19 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2010-May-07 22:18:19 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-07 22:18:19 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-May-07 22:18:19 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2010-May-07 22:18:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-07 22:18:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-07 22:18:19 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-May-07 22:18:19 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-May-07 22:18:19 LOG3 take_mock_data: PSET configuration: obsnm=RT 2010-May-07 22:18:19 LOG3 take_mock_data: PSET configuration: object=AGESVC1B_p2_021 2010-May-07 22:18:19 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-May-07 22:18:19 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-May-07 22:18:19 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-May-07 22:18:19 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-May-07 22:18:19 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-May-07 22:18:19 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-May-07 22:18:19 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2010-May-07 22:18:19 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2010-May-07 22:18:19 LOG3 take_mock_data: PSET configuration: patternid=12700128 2010-May-07 22:18:19 LOG3 take_mock_data: PSET configuration: scanid=12700128 2010-May-07 22:18:19 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-May-07 22:18:19 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-May-07 22:18:19 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-May-07 22:18:19 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456151765.0 2010-May-07 22:18:19 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306151765.0 2010-May-07 22:18:19 LOG3 take_mock_data: PSET configuration: filetype=1 2010-May-07 22:18:19 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-May-07 22:18:19 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=RT:object=AGESVC1B_p2_021:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=12700128:scanid=12700128:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456151765.0:topobfreqhz=1306151765.0:filetype=1 2010-May-07 22:18:19 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-May-07 22:18:19 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2010-May-07 22:18:19 LOG4 from_mock: From MOCK: psetok 2010-May-07 22:18:19 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-May-07 22:18:19 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2010-May-07 22:18:19 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-May-07 22:18:19 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-May-07 22:18:19 LOG3 socket_wait: To MOCK: STAR1200 2010-May-07 22:18:19 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-May-07 22:18:19 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2010-May-07 22:18:19 LOG4 from_mock: From MOCK: starok 2010-May-07 22:18:19 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-May-07 22:18:19 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2010-May-07 22:18:19 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-May-07 22:18:19 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 12700128 2010-May-07 22:18:19 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-May-07 22:18:19 LOG5 begin_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2010-May-07 22:18:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-07 22:18:19 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-May-07 22:18:19 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-May-07 22:18:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-07 22:18:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8300.00 2010-May-07 22:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.151765 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-07 22:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.151765 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 22:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.151765 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 22:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.151765 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 22:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.151765 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 22:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.151765 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 22:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.151765 MHz Flip = 1 Band = 0 Mixer = 1036.000000 MHz 2010-May-07 22:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.151765 MHz Flip = 1 Band = 0 Mixer = 1045.000000 MHz 2010-May-07 22:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.151765 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2010-May-07 22:18:21 INFO2 got_mock_message: Mock spectrometer start file number is 00500 2010-May-07 22:18:21 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-May-07 22:18:21 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2010-May-07 22:18:21 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2010-May-07 22:18:21 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-May-07 22:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-May-07 22:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-May-07 22:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-May-07 22:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-May-07 22:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-May-07 22:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-May-07 22:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-May-07 22:18:21 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-May-07 22:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.16 GB 2010-May-07 22:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.16 GB 2010-May-07 22:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.16 GB 2010-May-07 22:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.16 GB 2010-May-07 22:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.16 GB 2010-May-07 22:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.16 GB 2010-May-07 22:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.16 GB 2010-May-07 22:18:24 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 22:18:24.02 2010-May-07 22:18:24 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1273285104.02 Fri May 7 22:18:24 2010 2010-May-07 22:18:24 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-May-07 22:38:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-07 22:38:25 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-May-07 22:38:25 INFO1 got_mock_message: From MOCK: DONE with observation 2010-May-07 22:38:25 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-May-07 22:38:25 LOG5 end_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2010-May-07 22:38:25 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-May-07 22:38:25 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2010-May-07 22:38:25 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-May-07 22:38:25 LOG5 finish_task: Level: (2) ID = <10162> Status = 0 0 0 0 ok 2010-May-07 22:38:25 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2010-May-07 22:38:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-07 22:38:25 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2010-May-07 22:38:25 LOG5 end_task: Level: (2) ID = <10162> Status = 0 0 0 0 ok 2010-May-07 22:38:25 COMMAND run_command_line: EXECUTING command 50: 'ENDIF' 2010-May-07 22:38:25 NOTE run_command_file: DONE with command file processing 2010-May-07 22:38:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-May-07 22:38:25 STOP finish_task: Finishing task 'running command file '100507.cmd'' 2010-May-07 22:38:25 LOG5 finish_task: Level: (1) ID = <10161> Status = 0 0 0 0 ok 2010-May-07 22:38:25 DONE finish_task: DONE finished running: command file '100507.cmd' 2010-May-07 22:38:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-07 22:38:25 END end_task: Finishing task 'running command file '100507.cmd'' with status 'OK' 2010-May-07 22:38:25 LOG5 end_task: Level: (1) ID = <10161> Status = 0 0 0 0 ok 2010-May-07 22:39:18 ALERT CIMA-exit_cima: Exiting CIMA ... 2010-May-07 22:39:18 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2010-May-07 22:39:18 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2010-May-07 22:39:18 LOG3 vw_send: To DATATAKING: mvdata a2048 2010-May-07 22:39:19 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2010-May-07 22:39:19 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2010-May-07 22:39:19 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2010-May-07 22:39:19 NOTE CIMA-exit_cima: Cleaning up session ... 2010-May-07 22:39:19 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2010-May-07 22:39:19 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2010-May-07 22:39:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 22:39:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-07 22:39:21 LOG3 exec_msg: Closing socket