2010-Jan-07 18:15:09 BEGIN executive: CIMA executive starting ... 2010-Jan-07 18:15:10 NOTE executive: STARTING NEW CIMA SESSION 2010-Jan-07 18:15:10 INFO1 executive: Using CIMA version 3.1.06 'smart' from 2009-11-22 11:19 2010-Jan-07 18:15:10 INFO4 executive: This is an ON-LINE session 2010-Jan-07 18:15:10 INFO4 executive: This is a REMOTE session 2010-Jan-07 18:15:10 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2010-Jan-07 18:15:10 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'ss' 2010-Jan-07 18:15:10 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20100107' 2010-Jan-07 18:15:11 LOG2 log_preferences: Currently applied preferences: 2010-Jan-07 18:15:11 LOG2 log_preferences: prefs(dailylog) = daily 2010-Jan-07 18:15:11 LOG2 log_preferences: prefs(offlinelog) = skip 2010-Jan-07 18:15:11 LOG2 log_preferences: prefs(datawindow) = ignore 2010-Jan-07 18:15:11 LOG2 log_preferences: prefs(limitwarning) = enabled 2010-Jan-07 18:15:11 LOG2 log_preferences: prefs(wappfailure) = abort 2010-Jan-07 18:15:11 LOG2 log_preferences: prefs(helpstyle) = stay-open 2010-Jan-07 18:15:11 LOG2 log_preferences: prefs(logcolours) = full 2010-Jan-07 18:15:11 LOG2 log_preferences: prefs(displaylevel) = INFO3 2010-Jan-07 18:15:11 LOG2 log_preferences: prefs(loglevel) = LOG5 2010-Jan-07 18:15:11 LOG2 log_preferences: prefs(displayformat) = short 2010-Jan-07 18:15:11 LOG2 log_preferences: prefs(logformat) = new 2010-Jan-07 18:15:11 LOG2 log_preferences: prefs(fontsize) = 4 2010-Jan-07 18:15:11 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2010-Jan-07 18:15:11 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2010-Jan-07 18:15:11 ALERT executive: CIMA executive ready 2010-Jan-07 18:15:13 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2010-Jan-07 18:15:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:15:13 LOG4 got_cormsg: From DATATAKING: setup 2010-Jan-07 18:15:15 NOTE frontend: CIMA frontend ready 2010-Jan-07 18:15:20 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2010-Jan-07 18:15:20 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2010-Jan-07 18:15:20 LOG4 got_cormsg: From DATATAKING: vw% io 2010-Jan-07 18:15:20 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2010-Jan-07 18:15:20 LOG4 got_cormsg: From DATATAKING: 2010-Jan-07 18:15:20 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2010-Jan-07 18:15:20 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2010-Jan-07 18:15:20 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2010-Jan-07 18:15:20 LOG4 got_cormsg: From DATATAKING: vw% connectall 2010-Jan-07 18:15:21 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2010-Jan-07 18:15:21 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2010-Jan-07 18:15:21 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2010-Jan-07 18:15:21 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2010-Jan-07 18:15:21 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2010-Jan-07 18:15:21 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2010-Jan-07 18:15:21 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2010-Jan-07 18:15:21 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2010-Jan-07 18:15:21 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2010-Jan-07 18:15:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:15:21 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2010-Jan-07 18:15:21 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2010-Jan-07 18:15:21 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2010-Jan-07 18:15:21 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2010-Jan-07 18:15:21 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Jan-07 18:15:21 NOTE select_receiver: Starting to select receiver ALFA 2010-Jan-07 18:15:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Jan-07 18:15:21 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Jan-07 18:15:21 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Jan-07 18:15:21 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Jan-07 18:15:21 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Jan-07 18:15:21 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Jan-07 18:15:21 DONE finish_task: DONE finished selecting: receiver ALFA 2010-Jan-07 18:15:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-07 18:15:21 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Jan-07 18:15:21 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Jan-07 18:15:21 LOG4 got_cormsg: From DATATAKING: 2010-Jan-07 18:15:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:15:21 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Jan-07 18:15:21 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Jan-07 18:15:25 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-Jan-07 18:15:25 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-Jan-07 18:15:25 LOG5 restart_wapp: Calling 'restart_wapp' 2010-Jan-07 18:15:25 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-Jan-07 18:15:25 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Jan-07 18:15:25 NOTE restart_wapp: Restarting all WAPPs 2010-Jan-07 18:15:25 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-Jan-07 18:15:25 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-Jan-07 18:15:25 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Jan-07 18:15:25 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Jan-07 18:15:29 LOG4 got_cormsg: From DATATAKING: waiting for turret position:26.64 2010-Jan-07 18:15:29 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-Jan-07 18:15:29 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-Jan-07 18:15:29 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-Jan-07 18:15:29 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-Jan-07 18:15:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:15:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:15:57 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima31.cmd' (at lines 1 - 24) 2010-Jan-07 18:15:57 INFO4 CIMA-load_command_file: Loaded command file '100107.cmd' 2010-Jan-07 18:16:01 INFO1 CIMA-run_command_file: Transferring command file '100107.cmd' to executive ... 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima31.conf} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 27 {LOAD ages_mock.conf} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 28 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 29 {CATALOG AGESFull.cat} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 32 {IF LSTSLEW(AGES33PP_p1_091) < 011234 THEN} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 33 {FIXEDDRIFT az=192.10 alfaangle=7.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_091 ra=12400.00 dec=302500.00} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 36 {ENDIF} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 39 {IF LSTSLEW(AGES33PP_p1_093) < 013734 THEN} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 40 {FIXEDDRIFT az=166.87 alfaangle=31.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_093 ra=12400.00 dec=302200.00} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 43 {ENDIF} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 46 {IF LSTSLEW(AGES2082_p3_070) < 021235 THEN} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 47 {FIXEDDRIFT az=212.25 alfaangle=-10.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_070 ra=23100.00 dec=250430.00} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 50 {ENDIF} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 53 {IF LSTSLEW(AGES2082_p3_072) < 022505 THEN} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 54 {FIXEDDRIFT az=192.37 alfaangle=8.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_072 ra=23100.00 dec=250130.00} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 57 {ENDIF} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 29 60 {IF LSTSLEW(AGES2082_p3_074) < 023805 THEN} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 30 61 {FIXEDDRIFT az=167.53 alfaangle=30.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_074 ra=23100.00 dec=245830.00} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 31 64 {ENDIF} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 32 67 {IF LSTSLEW(AGES2082_p3_076) < 025035 THEN} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 33 68 {FIXEDDRIFT az=147.15 alfaangle=49.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_076 ra=23100.00 dec=245530.00} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 34 71 {ENDIF} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 35 74 {IF LSTSLEW(AGES2082_p3_078) < 030235 THEN} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 36 75 {FIXEDDRIFT az=133.73 alfaangle=63.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_078 ra=23100.00 dec=245230.00} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 37 78 {ENDIF} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 38 81 {IF LSTSLEW(AGES2082_p3_080) < 031435 THEN} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 39 82 {FIXEDDRIFT az=125.01 alfaangle=74.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_080 ra=23100.00 dec=244930.00} 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: store_command_file_line 40 85 {ENDIF} 2010-Jan-07 18:16:02 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Jan-07 18:16:02 LOG4 exec_msg: From OBSERVER: run_command_file 100107.cmd 1 1 40 2010-Jan-07 18:16:02 LOG4 run_command_file: Calling 'run_command_file 100107.cmd 1 1 40' 2010-Jan-07 18:16:02 BEGIN begin_task: Starting task 'running command file '100107.cmd'' 2010-Jan-07 18:16:02 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Jan-07 18:16:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100107.cmd' ...} 2010-Jan-07 18:16:03 NOTE run_command_file: Starting execution of command file '100107.cmd' from line 1 2010-Jan-07 18:16:03 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima31.conf' 2010-Jan-07 18:16:03 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Jan-07 18:16:03 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-07 18:16:03 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Jan-07 18:16:03 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2010-Jan-07 18:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Jan-07 18:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Jan-07 18:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Jan-07 18:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Jan-07 18:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Jan-07 18:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-Jan-07 18:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Jan-07 18:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2010-Jan-07 18:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2010-Jan-07 18:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2010-Jan-07 18:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2010-Jan-07 18:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2010-Jan-07 18:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2010-Jan-07 18:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2010-Jan-07 18:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2010-Jan-07 18:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2010-Jan-07 18:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Jan-07 18:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Jan-07 18:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Jan-07 18:16:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Jan-07 18:16:04 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Jan-07 18:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Jan-07 18:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Jan-07 18:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Jan-07 18:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Jan-07 18:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Jan-07 18:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Jan-07 18:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Jan-07 18:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Jan-07 18:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Jan-07 18:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Jan-07 18:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Jan-07 18:16:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Jan-07 18:16:05 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-07 18:16:05 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Jan-07 18:16:05 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Jan-07 18:16:05 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Jan-07 18:16:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Jan-07 18:16:05 INFO1 config_iflo: Selecting receiver ALFA 2010-Jan-07 18:16:05 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2010-Jan-07 18:16:05 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2010-Jan-07 18:16:05 START begin_task: Starting task 'selecting receiver ALFA' 2010-Jan-07 18:16:05 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Jan-07 18:16:05 NOTE select_receiver: Starting to select receiver ALFA 2010-Jan-07 18:16:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Jan-07 18:16:05 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Jan-07 18:16:05 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Jan-07 18:16:05 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Jan-07 18:16:05 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Jan-07 18:16:05 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Jan-07 18:16:05 INFO2 finish_task: DONE finished selecting: receiver ALFA 2010-Jan-07 18:16:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 18:16:05 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Jan-07 18:16:05 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Jan-07 18:16:05 START begin_task: Starting task 'waiting for receiver ALFA' 2010-Jan-07 18:16:05 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-Jan-07 18:16:05 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2010-Jan-07 18:16:05 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-Jan-07 18:16:05 INFO1 config_iflo: Configuring rest of the IF/LO path 2010-Jan-07 18:16:05 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2010-Jan-07 18:16:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 18:16:05 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-07 18:16:05 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 18:16:05 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-Jan-07 18:16:05 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Jan-07 18:16:05 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Jan-07 18:16:06 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 18:16:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 18:16:06 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-Jan-07 18:16:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 18:16:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-07 18:16:06 LOG3 vw_send: To DATATAKING: alfafb 1 2010-Jan-07 18:16:06 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2010-Jan-07 18:16:06 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Jan-07 18:16:06 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Jan-07 18:16:06 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2010-Jan-07 18:16:06 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2010-Jan-07 18:16:06 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2010-Jan-07 18:16:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Jan-07 18:16:06 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2010-Jan-07 18:16:06 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2010-Jan-07 18:16:07 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Jan-07 18:16:07 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Jan-07 18:16:07 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Jan-07 18:16:07 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Jan-07 18:16:07 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Jan-07 18:16:07 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2010-Jan-07 18:16:07 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2010-Jan-07 18:16:07 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2010-Jan-07 18:16:07 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2010-Jan-07 18:16:07 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Jan-07 18:16:07 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2010-Jan-07 18:16:07 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Jan-07 18:16:07 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Jan-07 18:16:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:16:07 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Jan-07 18:16:07 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2010-Jan-07 18:16:07 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Jan-07 18:16:07 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2010-Jan-07 18:16:07 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2010-Jan-07 18:16:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Jan-07 18:16:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:16:07 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Jan-07 18:16:07 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-Jan-07 18:16:07 LOG4 got_cormsg: From DATATAKING: alfafb 1 2010-Jan-07 18:16:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2010-Jan-07 18:16:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2010-Jan-07 18:16:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2010-Jan-07 18:16:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2010-Jan-07 18:16:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Jan-07 18:16:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2010-Jan-07 18:16:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2010-Jan-07 18:16:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2010-Jan-07 18:16:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2010-Jan-07 18:16:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2010-Jan-07 18:16:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2010-Jan-07 18:16:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Jan-07 18:16:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2010-Jan-07 18:16:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Jan-07 18:16:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:16:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Jan-07 18:16:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2010-Jan-07 18:16:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2010-Jan-07 18:16:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2010-Jan-07 18:16:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:16:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:22 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 18:16:22 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Jan-07 18:16:22 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-Jan-07 18:16:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Jan-07 18:16:22 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Jan-07 18:16:22 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Jan-07 18:16:22 DONE finish_task: DONE finished configuration: IF/LO path 2010-Jan-07 18:16:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-07 18:16:22 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Jan-07 18:16:22 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Jan-07 18:16:22 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Jan-07 18:16:22 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Jan-07 18:16:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Jan-07 18:16:22 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Jan-07 18:16:22 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Jan-07 18:16:22 START begin_task: Starting task 'selecting calibration port' 2010-Jan-07 18:16:22 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-Jan-07 18:16:22 LOG3 vw_send: To DATATAKING: calport 3 2010-Jan-07 18:16:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Jan-07 18:16:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:16:22 START begin_task: Starting task 'waiting on calport' 2010-Jan-07 18:16:22 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2010-Jan-07 18:16:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:22 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Jan-07 18:16:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:16:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:22 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 18:16:22 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Jan-07 18:16:22 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2010-Jan-07 18:16:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Jan-07 18:16:22 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Jan-07 18:16:22 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-Jan-07 18:16:22 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-07 18:16:22 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-07 18:16:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-07 18:16:22 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-Jan-07 18:16:22 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-07 18:16:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-07 18:16:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-07 18:16:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-07 18:16:22 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-Jan-07 18:16:22 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Jan-07 18:16:22 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Jan-07 18:16:22 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Jan-07 18:16:22 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Jan-07 18:16:22 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Jan-07 18:16:22 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Jan-07 18:16:22 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Jan-07 18:16:22 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Jan-07 18:16:22 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2010-Jan-07 18:16:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2010-Jan-07 18:16:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2010-Jan-07 18:16:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2010-Jan-07 18:16:23 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Jan-07 18:16:23 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Jan-07 18:16:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-07 18:16:23 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-Jan-07 18:16:23 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-07 18:16:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-07 18:16:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-07 18:16:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-07 18:16:23 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-Jan-07 18:16:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2010-Jan-07 18:16:23 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2010-Jan-07 18:16:23 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2010-Jan-07 18:16:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2010-Jan-07 18:16:23 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Jan-07 18:16:23 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Jan-07 18:16:23 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Jan-07 18:16:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-07 18:16:23 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Jan-07 18:16:23 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Jan-07 18:16:23 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2010-Jan-07 18:16:23 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2010-Jan-07 18:16:23 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2010-Jan-07 18:16:23 LOG3 is_if_valid: Current source data: up 196.0 12.4 UP - - 85 3.8 2010-Jan-07 18:16:23 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2010-Jan-07 18:16:23 INFO5 is_if_valid: Condition parsed as: 1 2010-Jan-07 18:16:23 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2010-Jan-07 18:16:23 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2010-Jan-07 18:16:23 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2010-Jan-07 18:16:23 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-Jan-07 18:16:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2010-Jan-07 18:16:23 LOG3 track_source: Calling 'track_source galfasrc 011400.0 +301130 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2010-Jan-07 18:16:23 START begin_task: Starting task 'sending tracking commands' 2010-Jan-07 18:16:23 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-Jan-07 18:16:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2010-Jan-07 18:16:23 INFO1 track_source: Starting to track galfasrc 2010-Jan-07 18:16:23 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2010-Jan-07 18:16:23 LOG3 vw_send: To DATATAKING: set ra 011400.0 2010-Jan-07 18:16:23 LOG3 vw_send: To DATATAKING: set dec +301130 2010-Jan-07 18:16:23 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-07 18:16:23 LOG3 vw_send: To DATATAKING: pnt tr 011400.0 +301130 -CJ 2010-Jan-07 18:16:23 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Jan-07 18:16:23 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-07 18:16:23 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-Jan-07 18:16:23 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-07 18:16:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 18:16:24 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-07 18:16:24 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-Jan-07 18:16:24 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2010-Jan-07 18:16:24 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-Jan-07 18:16:24 DONE finish_task: DONE finished tracking: source 'galfasrc' 2010-Jan-07 18:16:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-07 18:16:24 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2010-Jan-07 18:16:24 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-Jan-07 18:16:24 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2010-Jan-07 18:16:24 INFO1 run_command_line: Skipping line 'ELSEIF isup(galfasrc2) then' since an earlier condition already has been true 2010-Jan-07 18:16:24 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2010-Jan-07 18:16:24 INFO1 run_command_line: Skipping line 'GOTO galfasrc2' in non-true conditional branch 2010-Jan-07 18:16:24 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2010-Jan-07 18:16:24 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2010-Jan-07 18:16:24 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2010-Jan-07 18:16:24 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2010-Jan-07 18:16:24 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2010-Jan-07 18:16:24 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2010-Jan-07 18:16:24 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2010-Jan-07 18:16:24 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2010-Jan-07 18:16:24 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2010-Jan-07 18:16:24 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Jan-07 18:16:24 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2010-Jan-07 18:16:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Jan-07 18:16:24 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Jan-07 18:16:24 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-Jan-07 18:16:24 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Jan-07 18:16:24 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Jan-07 18:16:24 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2010-Jan-07 18:16:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2010-Jan-07 18:16:24 NOTE WAPPDATA-new_file: New FITS file: wapp.20100107.a2048.0000.fits 2010-Jan-07 18:16:24 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2010-Jan-07 18:16:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Jan-07 18:16:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Jan-07 18:16:24 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20100107.a2048.0000.fits} 2010-Jan-07 18:16:24 LOG4 got_cormsg: From DATATAKING: set ra 011400.0 2010-Jan-07 18:16:24 LOG4 got_cormsg: From DATATAKING: set dec +301130 2010-Jan-07 18:16:24 LOG4 got_cormsg: From DATATAKING: vw% 011400.0 2010-Jan-07 18:16:24 LOG4 got_cormsg: From DATATAKING: vw% +301130 2010-Jan-07 18:16:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:24 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-07 18:16:24 LOG4 got_cormsg: From DATATAKING: pnt tr 011400.0 +301130 -CJ 2010-Jan-07 18:16:24 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Jan-07 18:16:24 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Jan-07 18:16:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:16:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2010-Jan-07 18:16:42 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Jan-07 18:16:42 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Jan-07 18:16:42 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Jan-07 18:16:42 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2010-Jan-07 18:16:42 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Jan-07 18:16:42 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Jan-07 18:16:42 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2010-Jan-07 18:16:42 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Jan-07 18:16:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-07 18:16:42 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Jan-07 18:16:42 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2010-Jan-07 18:16:42 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2010-Jan-07 18:16:42 BEGIN begin_task: Starting task 'waiting on telescope' 2010-Jan-07 18:16:42 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2010-Jan-07 18:16:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Jan-07 18:16:43 LOG3 waittrk: Start waittrk 5 2010-Jan-07 18:16:43 START begin_task: Starting task 'waiting on telescope movement' 2010-Jan-07 18:16:43 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2010-Jan-07 18:16:48 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Jan-07 18:16:48 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2010-Jan-07 18:16:48 START begin_task: Starting task 'waiting on telescope on source' 2010-Jan-07 18:16:48 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Jan-07 18:20:26 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Jan-07 18:20:26 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Jan-07 18:20:26 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Jan-07 18:20:26 INFO2 waittrk: Now tracking galfasrc 2010-Jan-07 18:20:26 LOG4 waittrk: Current telescope position: Az = 191.72 ZA = 12.22 2010-Jan-07 18:20:26 STOP finish_task: Finishing task 'waiting on telescope' 2010-Jan-07 18:20:26 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2010-Jan-07 18:20:26 DONE finish_task: DONE finished waiting: telescope on source 2010-Jan-07 18:20:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-07 18:20:26 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Jan-07 18:20:26 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2010-Jan-07 18:20:26 COMMAND run_command_line: EXECUTING command 20: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2010-Jan-07 18:20:26 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2010-Jan-07 18:20:27 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-07 18:20:27 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2010-Jan-07 18:20:27 BEGIN begin_task: Starting task 'smart frequency switching' 2010-Jan-07 18:20:27 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-Jan-07 18:20:27 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2010-Jan-07 18:20:27 INFO1 smartfreq: Starting pattern: Smart frequency switching 2010-Jan-07 18:20:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2010-Jan-07 18:20:27 START begin_task: Starting task 'selecting calibration type' 2010-Jan-07 18:20:27 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2010-Jan-07 18:20:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-07 18:20:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-07 18:20:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:20:27 START begin_task: Starting task 'waiting on setcal' 2010-Jan-07 18:20:27 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2010-Jan-07 18:20:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-07 18:20:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:20:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:20:27 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 18:20:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-07 18:20:27 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2010-Jan-07 18:20:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-07 18:20:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 18:20:27 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-07 18:20:27 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 18:20:27 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2010-Jan-07 18:20:27 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 18:20:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 18:20:27 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2010-Jan-07 18:20:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 18:20:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-07 18:20:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 18:20:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-07 18:20:27 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 18:20:27 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2010-Jan-07 18:20:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:20:27 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 18:20:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 18:20:27 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2010-Jan-07 18:20:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 18:20:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-07 18:20:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-07 18:20:27 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2010-Jan-07 18:20:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2010-Jan-07 18:20:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2010-Jan-07 18:20:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2010-Jan-07 18:20:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2010-Jan-07 18:20:27 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20100107.a2048.0000.fits' is empty! 2010-Jan-07 18:20:27 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2010-Jan-07 18:20:27 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-Jan-07 18:20:27 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Jan-07 18:20:27 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-07 18:20:27 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-07 18:20:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-07 18:20:27 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2010-Jan-07 18:20:27 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-07 18:20:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-07 18:20:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-07 18:20:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-07 18:20:27 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2010-Jan-07 18:20:27 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Jan-07 18:20:27 START begin_task: Starting task 'adjusting WAPP power' 2010-Jan-07 18:20:27 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Jan-07 18:20:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Jan-07 18:20:27 INFO2 adjust_power: Starting to adjust WAPP power 2010-Jan-07 18:20:27 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Jan-07 18:20:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Jan-07 18:20:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:20:28 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Jan-07 18:20:28 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2010-Jan-07 18:20:28 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Jan-07 18:20:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:20:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2010-Jan-07 18:20:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:20:30 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 18:20:30 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Jan-07 18:20:30 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2010-Jan-07 18:20:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Jan-07 18:20:30 START begin_task: Starting task 'adjusting WAPP power' 2010-Jan-07 18:20:30 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2010-Jan-07 18:20:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Jan-07 18:20:30 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 18:20:30 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 18:20:31 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 18:20:31 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 18:20:31 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Jan-07 18:20:31 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2010-Jan-07 18:20:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Jan-07 18:20:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:20:31 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 7 dB --- beam 1: 7 7 dB 2010-Jan-07 18:20:31 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 5 dB 2010-Jan-07 18:20:31 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 2 3 dB --- beam 3: 4 4 dB 2010-Jan-07 18:20:31 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 1 dB --- beam 7: 4 2 dB 2010-Jan-07 18:20:31 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Jan-07 18:20:31 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Jan-07 18:20:31 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2010-Jan-07 18:20:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.037 0.914 ALFA beam 1: 0.995 1.007 2010-Jan-07 18:20:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.997 1.065 ALFA beam 3: 1.088 0.920 2010-Jan-07 18:20:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.089 0.882 ALFA beam 5: 1.079 1.030 2010-Jan-07 18:20:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.098 0.892 ALFA beam 7: 0.965 0.867 2010-Jan-07 18:20:31 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Jan-07 18:20:31 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2010-Jan-07 18:20:31 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Jan-07 18:20:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 18:20:31 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Jan-07 18:20:31 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2010-Jan-07 18:20:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-07 18:20:31 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Jan-07 18:20:31 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Jan-07 18:20:31 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Jan-07 18:20:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 18:20:31 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Jan-07 18:20:31 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Jan-07 18:20:31 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2010-Jan-07 18:20:31 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-Jan-07 18:20:31 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-Jan-07 18:20:31 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:20:31 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02126 J 2010-Jan-07 18:20:31 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:20:31 LOG2 antvel: Parameters to Doppler: Topocentric 80431 2010 7 0.0 2010-Jan-07 18:20:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:20:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-Jan-07 18:20:31 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-Jan-07 18:20:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:20:31 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:20:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Jan-07 18:20:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:20:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2010-Jan-07 18:20:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:20:31 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2010-Jan-07 18:20:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2010-Jan-07 18:20:31 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.049713 2010.0212573516365 18.999933 2010-Jan-07 18:20:31 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333324 30.191666666666659 2010-Jan-07 18:20:31 LOG4 log_alfabeam: ALFABEAM 1 1.232801599891598 30.085752303561318 2010-Jan-07 18:20:31 LOG4 log_alfabeam: ALFABEAM 2 1.239191604951158 30.137979829783156 2010-Jan-07 18:20:31 LOG4 log_alfabeam: ALFABEAM 3 1.239768676358485 30.243870768241756 2010-Jan-07 18:20:31 LOG4 log_alfabeam: ALFABEAM 4 1.233843567203520 30.297623583358440 2010-Jan-07 18:20:31 LOG4 log_alfabeam: ALFABEAM 5 1.227421644056382 30.244816105103922 2010-Jan-07 18:20:31 LOG4 log_alfabeam: ALFABEAM 6 1.226956750418310 30.138840611290640 2010-Jan-07 18:20:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229492 2010-Jan-07 18:20:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:20:32 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2010-Jan-07 18:20:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:20:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Jan-07 18:20:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:20:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:20:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:20:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-Jan-07 18:20:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80433.00 2010-Jan-07 18:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:20:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:20:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:20:43 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2010-Jan-07 18:20:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:20:43 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2010-Jan-07 18:20:43 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2010-Jan-07 18:20:43 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-Jan-07 18:20:43 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-Jan-07 18:20:43 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:20:43 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02126 J 2010-Jan-07 18:20:43 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:20:43 LOG2 antvel: Parameters to Doppler: Topocentric 80443 2010 7 0.0 2010-Jan-07 18:20:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:20:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-Jan-07 18:20:43 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-Jan-07 18:20:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:20:43 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:20:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Jan-07 18:20:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:20:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2010-Jan-07 18:20:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:20:43 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2010-Jan-07 18:20:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2010-Jan-07 18:20:43 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.053055 2010.0212577318935 18.999933 2010-Jan-07 18:20:43 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333328 30.191666666666670 2010-Jan-07 18:20:43 LOG4 log_alfabeam: ALFABEAM 1 1.232833049050165 30.085726533560138 2010-Jan-07 18:20:43 LOG4 log_alfabeam: ALFABEAM 2 1.239207503131709 30.138272799593722 2010-Jan-07 18:20:43 LOG4 log_alfabeam: ALFABEAM 3 1.239753131958749 30.244191758588762 2010-Jan-07 18:20:43 LOG4 log_alfabeam: ALFABEAM 4 1.233812019207344 30.297648311515175 2010-Jan-07 18:20:43 LOG4 log_alfabeam: ALFABEAM 5 1.227405867790462 30.244520072662542 2010-Jan-07 18:20:43 LOG4 log_alfabeam: ALFABEAM 6 1.226972526345621 30.138522108381185 2010-Jan-07 18:20:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229493 2010-Jan-07 18:20:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:20:44 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2010-Jan-07 18:20:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:20:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Jan-07 18:20:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:20:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:20:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:20:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-Jan-07 18:20:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80445.00 2010-Jan-07 18:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:20:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:20:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:20:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:20:55 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2010-Jan-07 18:20:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:20:55 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2010-Jan-07 18:20:55 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2010-Jan-07 18:20:55 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-Jan-07 18:20:55 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-Jan-07 18:20:55 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:20:55 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02126 J 2010-Jan-07 18:20:55 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:20:55 LOG2 antvel: Parameters to Doppler: Topocentric 80455 2010 7 0.0 2010-Jan-07 18:20:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:20:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-Jan-07 18:20:55 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-Jan-07 18:20:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:20:55 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:20:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Jan-07 18:20:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:20:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2010-Jan-07 18:20:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:20:55 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Jan-07 18:20:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2010-Jan-07 18:20:55 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.056398 2010.0212581121505 18.999933 2010-Jan-07 18:20:55 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333322 30.191666666666674 2010-Jan-07 18:20:55 LOG4 log_alfabeam: ALFABEAM 1 1.232864562691899 30.085702292311158 2010-Jan-07 18:20:55 LOG4 log_alfabeam: ALFABEAM 2 1.239223343149660 30.138567096361463 2010-Jan-07 18:20:55 LOG4 log_alfabeam: ALFABEAM 3 1.239737463413677 30.244512553314920 2010-Jan-07 18:20:55 LOG4 log_alfabeam: ALFABEAM 4 1.233780407115154 30.297671502589527 2010-Jan-07 18:20:55 LOG4 log_alfabeam: ALFABEAM 5 1.227390151866936 30.244222718575340 2010-Jan-07 18:20:55 LOG4 log_alfabeam: ALFABEAM 6 1.226988425202746 30.138203826859620 2010-Jan-07 18:20:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229494 2010-Jan-07 18:20:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:20:56 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2010-Jan-07 18:20:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:20:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Jan-07 18:20:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:20:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:20:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:20:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-Jan-07 18:20:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80457.00 2010-Jan-07 18:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:20:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:21:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:21:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:21:07 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2010-Jan-07 18:21:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:21:07 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Jan-07 18:21:07 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2010-Jan-07 18:21:07 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-Jan-07 18:21:07 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-Jan-07 18:21:07 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:21:07 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02126 J 2010-Jan-07 18:21:07 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:21:07 LOG2 antvel: Parameters to Doppler: Topocentric 80467 2010 7 0.0 2010-Jan-07 18:21:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:21:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-Jan-07 18:21:07 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-Jan-07 18:21:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:21:07 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:21:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Jan-07 18:21:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:21:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2010-Jan-07 18:21:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:21:07 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2010-Jan-07 18:21:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2010-Jan-07 18:21:07 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.059740 2010.0212584924075 18.999933 2010-Jan-07 18:21:07 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333333 30.191666666666670 2010-Jan-07 18:21:07 LOG4 log_alfabeam: ALFABEAM 1 1.232896120838914 30.085679602307547 2010-Jan-07 18:21:07 LOG4 log_alfabeam: ALFABEAM 2 1.239239114552170 30.138862536824149 2010-Jan-07 18:21:07 LOG4 log_alfabeam: ALFABEAM 3 1.239721680238004 30.244832945146531 2010-Jan-07 18:21:07 LOG4 log_alfabeam: ALFABEAM 4 1.233748750974355 30.297693134769482 2010-Jan-07 18:21:07 LOG4 log_alfabeam: ALFABEAM 5 1.227374506663617 30.243924228225143 2010-Jan-07 18:21:07 LOG4 log_alfabeam: ALFABEAM 6 1.227004437311494 30.137885972396674 2010-Jan-07 18:21:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229495 2010-Jan-07 18:21:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:21:08 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2010-Jan-07 18:21:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:21:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Jan-07 18:21:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:21:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:21:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:21:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-Jan-07 18:21:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80469.00 2010-Jan-07 18:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:21:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:21:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:21:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:21:19 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2010-Jan-07 18:21:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:21:19 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2010-Jan-07 18:21:19 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2010-Jan-07 18:21:19 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-Jan-07 18:21:19 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-Jan-07 18:21:19 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:21:19 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02126 J 2010-Jan-07 18:21:19 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:21:19 LOG2 antvel: Parameters to Doppler: Topocentric 80479 2010 7 0.0 2010-Jan-07 18:21:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:21:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-Jan-07 18:21:19 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-Jan-07 18:21:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:21:19 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:21:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Jan-07 18:21:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:21:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2010-Jan-07 18:21:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:21:19 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-Jan-07 18:21:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2010-Jan-07 18:21:19 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.063083 2010.0212588726647 18.999933 2010-Jan-07 18:21:19 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333326 30.191666666666674 2010-Jan-07 18:21:19 LOG4 log_alfabeam: ALFABEAM 1 1.232927741239963 30.085658457820966 2010-Jan-07 18:21:19 LOG4 log_alfabeam: ALFABEAM 2 1.239254825803529 30.139159290405786 2010-Jan-07 18:21:19 LOG4 log_alfabeam: ALFABEAM 3 1.239705773142141 30.245153110419317 2010-Jan-07 18:21:19 LOG4 log_alfabeam: ALFABEAM 4 1.233717032988038 30.297713213204808 2010-Jan-07 18:21:19 LOG4 log_alfabeam: ALFABEAM 5 1.227358923790709 30.243624430655029 2010-Jan-07 18:21:19 LOG4 log_alfabeam: ALFABEAM 6 1.227020572072708 30.137568370070891 2010-Jan-07 18:21:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229496 2010-Jan-07 18:21:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:21:20 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2010-Jan-07 18:21:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:21:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Jan-07 18:21:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:21:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:21:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:21:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80481.00 2010-Jan-07 18:21:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-Jan-07 18:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:21:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:21:28 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 55203.931551 to 55203.931563! 2010-Jan-07 18:21:29 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (55203.931551 - 55203.931574)! 2010-Jan-07 18:21:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:21:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:21:31 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2010-Jan-07 18:21:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:21:31 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-Jan-07 18:21:31 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2010-Jan-07 18:21:31 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-Jan-07 18:21:31 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-Jan-07 18:21:31 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:21:31 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02126 J 2010-Jan-07 18:21:31 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:21:31 LOG2 antvel: Parameters to Doppler: Topocentric 80491 2010 7 0.0 2010-Jan-07 18:21:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:21:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-Jan-07 18:21:31 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-Jan-07 18:21:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:21:31 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:21:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Jan-07 18:21:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:21:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2010-Jan-07 18:21:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:21:31 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2010-Jan-07 18:21:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2010-Jan-07 18:21:31 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.066425 2010.0212592529217 18.999933 2010-Jan-07 18:21:31 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333330 30.191666666666670 2010-Jan-07 18:21:31 LOG4 log_alfabeam: ALFABEAM 1 1.232959403829302 30.085638879202673 2010-Jan-07 18:21:31 LOG4 log_alfabeam: ALFABEAM 2 1.239270466533409 30.139457172009127 2010-Jan-07 18:21:31 LOG4 log_alfabeam: ALFABEAM 3 1.239689751813533 30.245472842156339 2010-Jan-07 18:21:31 LOG4 log_alfabeam: ALFABEAM 4 1.233685273291012 30.297731718238268 2010-Jan-07 18:21:31 LOG4 log_alfabeam: ALFABEAM 5 1.227343413540207 30.243323513076405 2010-Jan-07 18:21:31 LOG4 log_alfabeam: ALFABEAM 6 1.227036819637260 30.137251225216804 2010-Jan-07 18:21:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229497 2010-Jan-07 18:21:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:21:32 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2010-Jan-07 18:21:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:21:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Jan-07 18:21:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:21:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:21:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:21:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-Jan-07 18:21:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80493.00 2010-Jan-07 18:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:21:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:21:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:21:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:21:43 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2010-Jan-07 18:21:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:21:43 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2010-Jan-07 18:21:43 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2010-Jan-07 18:21:43 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-Jan-07 18:21:43 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-Jan-07 18:21:43 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:21:43 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02126 J 2010-Jan-07 18:21:43 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:21:43 LOG2 antvel: Parameters to Doppler: Topocentric 80503 2010 7 0.0 2010-Jan-07 18:21:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:21:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-Jan-07 18:21:43 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-Jan-07 18:21:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:21:43 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:21:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Jan-07 18:21:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:21:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2010-Jan-07 18:21:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:21:43 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2010-Jan-07 18:21:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2010-Jan-07 18:21:43 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.069767 2010.0212596331787 18.999933 2010-Jan-07 18:21:43 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333319 30.191666666666677 2010-Jan-07 18:21:43 LOG4 log_alfabeam: ALFABEAM 1 1.232991116897826 30.085620867445613 2010-Jan-07 18:21:43 LOG4 log_alfabeam: ALFABEAM 2 1.239286040483900 30.139756262479644 2010-Jan-07 18:21:43 LOG4 log_alfabeam: ALFABEAM 3 1.239673611697363 30.245792220713735 2010-Jan-07 18:21:43 LOG4 log_alfabeam: ALFABEAM 4 1.233653463573569 30.297748648616960 2010-Jan-07 18:21:43 LOG4 log_alfabeam: ALFABEAM 5 1.227327972206300 30.243021394025472 2010-Jan-07 18:21:43 LOG4 log_alfabeam: ALFABEAM 6 1.227053184602642 30.136934458127332 2010-Jan-07 18:21:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229498 2010-Jan-07 18:21:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:21:44 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2010-Jan-07 18:21:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:21:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Jan-07 18:21:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:21:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:21:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:21:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-Jan-07 18:21:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80505.00 2010-Jan-07 18:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:21:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:21:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:21:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:21:55 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2010-Jan-07 18:21:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:21:55 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2010-Jan-07 18:21:55 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-Jan-07 18:21:55 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-07 18:21:55 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-07 18:21:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-07 18:21:55 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-Jan-07 18:21:55 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-07 18:21:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-07 18:21:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-07 18:21:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-07 18:21:55 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-Jan-07 18:21:55 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2010-Jan-07 18:21:55 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-Jan-07 18:21:55 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-Jan-07 18:21:55 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:21:55 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02126 J 2010-Jan-07 18:21:55 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:21:55 LOG2 antvel: Parameters to Doppler: Topocentric 80515 2010 7 0.0 2010-Jan-07 18:21:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:21:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-Jan-07 18:21:55 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-Jan-07 18:21:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:21:55 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:21:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Jan-07 18:21:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:21:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2010-Jan-07 18:21:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:21:55 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2010-Jan-07 18:21:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2010-Jan-07 18:21:55 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.073110 2010.0212600134357 18.999933 2010-Jan-07 18:21:55 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333317 30.191666666666670 2010-Jan-07 18:21:55 LOG4 log_alfabeam: ALFABEAM 1 1.233022888785359 30.085604425266773 2010-Jan-07 18:21:55 LOG4 log_alfabeam: ALFABEAM 2 1.239301551320419 30.140056643927956 2010-Jan-07 18:21:55 LOG4 log_alfabeam: ALFABEAM 3 1.239657348111830 30.246111325992747 2010-Jan-07 18:21:55 LOG4 log_alfabeam: ALFABEAM 4 1.233621595477831 30.297764001356388 2010-Jan-07 18:21:55 LOG4 log_alfabeam: ALFABEAM 5 1.227312596161971 30.242717990782822 2010-Jan-07 18:21:55 LOG4 log_alfabeam: ALFABEAM 6 1.227069671691966 30.136617989574916 2010-Jan-07 18:21:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229499 2010-Jan-07 18:21:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:21:56 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2010-Jan-07 18:21:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:21:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Jan-07 18:21:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:21:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:21:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:21:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-Jan-07 18:21:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80517.00 2010-Jan-07 18:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:21:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:22:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:22:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:22:07 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2010-Jan-07 18:22:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:22:07 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2010-Jan-07 18:22:07 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2010-Jan-07 18:22:07 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-Jan-07 18:22:07 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-Jan-07 18:22:07 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:22:07 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02126 J 2010-Jan-07 18:22:07 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:22:07 LOG2 antvel: Parameters to Doppler: Topocentric 80527 2010 7 0.0 2010-Jan-07 18:22:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:22:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-Jan-07 18:22:07 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-Jan-07 18:22:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:22:07 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:22:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Jan-07 18:22:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:22:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2010-Jan-07 18:22:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:22:07 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2010-Jan-07 18:22:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2010-Jan-07 18:22:07 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.076452 2010.0212603936927 18.999933 2010-Jan-07 18:22:07 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333328 30.191666666666674 2010-Jan-07 18:22:07 LOG4 log_alfabeam: ALFABEAM 1 1.233054699300687 30.085589569749615 2010-Jan-07 18:22:07 LOG4 log_alfabeam: ALFABEAM 2 1.239316988802602 30.140358128540786 2010-Jan-07 18:22:07 LOG4 log_alfabeam: ALFABEAM 3 1.239640971003063 30.246429951553971 2010-Jan-07 18:22:07 LOG4 log_alfabeam: ALFABEAM 4 1.233589689263101 30.297777760086028 2010-Jan-07 18:22:07 LOG4 log_alfabeam: ALFABEAM 5 1.227297295564443 30.242413493263868 2010-Jan-07 18:22:07 LOG4 log_alfabeam: ALFABEAM 6 1.227086270800082 30.136302024297763 2010-Jan-07 18:22:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229500 2010-Jan-07 18:22:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:22:08 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2010-Jan-07 18:22:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:22:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Jan-07 18:22:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:22:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:22:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:22:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-Jan-07 18:22:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80529.00 2010-Jan-07 18:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:22:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:22:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:22:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:22:19 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2010-Jan-07 18:22:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:22:19 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2010-Jan-07 18:22:19 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2010-Jan-07 18:22:19 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-Jan-07 18:22:19 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-Jan-07 18:22:19 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:22:19 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02126 J 2010-Jan-07 18:22:19 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:22:19 LOG2 antvel: Parameters to Doppler: Topocentric 80539 2010 7 0.0 2010-Jan-07 18:22:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:22:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-Jan-07 18:22:19 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-Jan-07 18:22:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:22:19 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:22:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Jan-07 18:22:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:22:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2010-Jan-07 18:22:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:22:19 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2010-Jan-07 18:22:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2010-Jan-07 18:22:19 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.079795 2010.02126077395 18.999933 2010-Jan-07 18:22:19 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333318 30.191666666666670 2010-Jan-07 18:22:19 LOG4 log_alfabeam: ALFABEAM 1 1.233086566285687 30.085576299096672 2010-Jan-07 18:22:19 LOG4 log_alfabeam: ALFABEAM 2 1.239332361211506 30.140660888450078 2010-Jan-07 18:22:19 LOG4 log_alfabeam: ALFABEAM 3 1.239624470801728 30.246748272515223 2010-Jan-07 18:22:19 LOG4 log_alfabeam: ALFABEAM 4 1.233557727040686 30.297789926009902 2010-Jan-07 18:22:19 LOG4 log_alfabeam: ALFABEAM 5 1.227282062211539 30.242107727828486 2010-Jan-07 18:22:19 LOG4 log_alfabeam: ALFABEAM 6 1.227102991603836 30.135986388641623 2010-Jan-07 18:22:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229501 2010-Jan-07 18:22:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:22:20 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2010-Jan-07 18:22:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:22:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Jan-07 18:22:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:22:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:22:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:22:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-Jan-07 18:22:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80541.00 2010-Jan-07 18:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:22:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:22:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:22:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:22:31 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2010-Jan-07 18:22:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:22:31 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2010-Jan-07 18:22:31 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2010-Jan-07 18:22:31 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-Jan-07 18:22:31 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-Jan-07 18:22:31 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:22:31 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02126 J 2010-Jan-07 18:22:31 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:22:31 LOG2 antvel: Parameters to Doppler: Topocentric 80551 2010 7 0.0 2010-Jan-07 18:22:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:22:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-Jan-07 18:22:31 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-Jan-07 18:22:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:22:31 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:22:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Jan-07 18:22:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:22:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2010-Jan-07 18:22:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:22:31 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2010-Jan-07 18:22:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2010-Jan-07 18:22:31 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.083137 2010.021261154207 18.999933 2010-Jan-07 18:22:31 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333313 30.191666666666674 2010-Jan-07 18:22:31 LOG4 log_alfabeam: ALFABEAM 1 1.233118469469938 30.085564628177607 2010-Jan-07 18:22:31 LOG4 log_alfabeam: ALFABEAM 2 1.239347658397404 30.140964734058237 2010-Jan-07 18:22:31 LOG4 log_alfabeam: ALFABEAM 3 1.239607857626087 30.247066082857877 2010-Jan-07 18:22:31 LOG4 log_alfabeam: ALFABEAM 4 1.233525729148496 30.297800484983714 2010-Jan-07 18:22:31 LOG4 log_alfabeam: ALFABEAM 5 1.227266906166453 30.241800886167237 2010-Jan-07 18:22:31 LOG4 log_alfabeam: ALFABEAM 6 1.227119823827927 30.135671286885163 2010-Jan-07 18:22:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229502 2010-Jan-07 18:22:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:22:32 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2010-Jan-07 18:22:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:22:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Jan-07 18:22:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:22:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:22:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:22:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-Jan-07 18:22:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80553.00 2010-Jan-07 18:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:22:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:22:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:22:43 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2010-Jan-07 18:22:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:22:43 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2010-Jan-07 18:22:43 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2010-Jan-07 18:22:43 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-Jan-07 18:22:43 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-Jan-07 18:22:43 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:22:43 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02126 J 2010-Jan-07 18:22:43 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:22:43 LOG2 antvel: Parameters to Doppler: Topocentric 80563 2010 7 0.0 2010-Jan-07 18:22:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:22:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-Jan-07 18:22:43 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-Jan-07 18:22:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:22:43 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:22:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Jan-07 18:22:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:22:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2010-Jan-07 18:22:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:22:43 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2010-Jan-07 18:22:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2010-Jan-07 18:22:43 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.086480 2010.021261534464 18.999933 2010-Jan-07 18:22:43 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333303 30.191666666666674 2010-Jan-07 18:22:43 LOG4 log_alfabeam: ALFABEAM 1 1.233150426728868 30.085554556778963 2010-Jan-07 18:22:43 LOG4 log_alfabeam: ALFABEAM 2 1.239362888565735 30.141269838549853 2010-Jan-07 18:22:43 LOG4 log_alfabeam: ALFABEAM 3 1.239591121796279 30.247383557169844 2010-Jan-07 18:22:43 LOG4 log_alfabeam: ALFABEAM 4 1.233493677664875 30.297809436621648 2010-Jan-07 18:22:43 LOG4 log_alfabeam: ALFABEAM 5 1.227251819304502 30.241492793597882 2010-Jan-07 18:22:43 LOG4 log_alfabeam: ALFABEAM 6 1.227136777258244 30.135356545923258 2010-Jan-07 18:22:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229503 2010-Jan-07 18:22:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:22:44 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2010-Jan-07 18:22:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:22:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Jan-07 18:22:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:22:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:22:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:22:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-Jan-07 18:22:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80565.00 2010-Jan-07 18:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:22:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:22:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:22:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:22:55 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2010-Jan-07 18:22:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:22:55 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2010-Jan-07 18:22:55 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2010-Jan-07 18:22:55 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-Jan-07 18:22:55 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-Jan-07 18:22:55 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:22:55 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02126 J 2010-Jan-07 18:22:55 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:22:55 LOG2 antvel: Parameters to Doppler: Topocentric 80575 2010 7 0.0 2010-Jan-07 18:22:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:22:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-Jan-07 18:22:55 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-Jan-07 18:22:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:22:55 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:22:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Jan-07 18:22:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:22:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2010-Jan-07 18:22:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:22:55 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-Jan-07 18:22:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2010-Jan-07 18:22:55 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.089822 2010.021261914721 18.999933 2010-Jan-07 18:22:55 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333312 30.191666666666674 2010-Jan-07 18:22:55 LOG4 log_alfabeam: ALFABEAM 1 1.233182417716544 30.085546097529697 2010-Jan-07 18:22:55 LOG4 log_alfabeam: ALFABEAM 2 1.239378041660608 30.141576010565796 2010-Jan-07 18:22:55 LOG4 log_alfabeam: ALFABEAM 3 1.239574273602348 30.247700489903576 2010-Jan-07 18:22:55 LOG4 log_alfabeam: ALFABEAM 4 1.233461593002634 30.297816769032501 2010-Jan-07 18:22:55 LOG4 log_alfabeam: ALFABEAM 5 1.227236811591737 30.241183643562369 2010-Jan-07 18:22:55 LOG4 log_alfabeam: ALFABEAM 6 1.227153841449745 30.135042369525014 2010-Jan-07 18:22:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229504 2010-Jan-07 18:22:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:22:56 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2010-Jan-07 18:22:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:22:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Jan-07 18:22:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:22:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:22:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:22:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-Jan-07 18:22:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80577.00 2010-Jan-07 18:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:22:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:23:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:23:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:23:07 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2010-Jan-07 18:23:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:23:07 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-Jan-07 18:23:07 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2010-Jan-07 18:23:07 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-Jan-07 18:23:07 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-Jan-07 18:23:07 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:23:07 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02126 J 2010-Jan-07 18:23:07 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:23:07 LOG2 antvel: Parameters to Doppler: Topocentric 80587 2010 7 0.0 2010-Jan-07 18:23:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:23:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-Jan-07 18:23:07 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-Jan-07 18:23:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:23:07 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:23:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Jan-07 18:23:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:23:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2010-Jan-07 18:23:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:23:07 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-Jan-07 18:23:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2010-Jan-07 18:23:07 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.093165 2010.021262294978 18.999933 2010-Jan-07 18:23:07 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333320 30.191666666666670 2010-Jan-07 18:23:07 LOG4 log_alfabeam: ALFABEAM 1 1.233214460339724 30.085539251806281 2010-Jan-07 18:23:07 LOG4 log_alfabeam: ALFABEAM 2 1.239393125810534 30.141883424325300 2010-Jan-07 18:23:07 LOG4 log_alfabeam: ALFABEAM 3 1.239557303254672 30.248017055092905 2010-Jan-07 18:23:07 LOG4 log_alfabeam: ALFABEAM 4 1.233429457209286 30.297822480234807 2010-Jan-07 18:23:07 LOG4 log_alfabeam: ALFABEAM 5 1.227221874982154 30.240873260354615 2010-Jan-07 18:23:07 LOG4 log_alfabeam: ALFABEAM 6 1.227171026296487 30.134728585158179 2010-Jan-07 18:23:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229505 2010-Jan-07 18:23:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:23:08 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-Jan-07 18:23:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:23:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Jan-07 18:23:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:23:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:23:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:23:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-Jan-07 18:23:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80589.00 2010-Jan-07 18:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:23:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:23:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:23:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:23:19 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-Jan-07 18:23:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:23:19 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-Jan-07 18:23:19 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2010-Jan-07 18:23:19 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-Jan-07 18:23:19 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Jan-07 18:23:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-07 18:23:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-07 18:23:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-07 18:23:19 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-Jan-07 18:23:19 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-07 18:23:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-07 18:23:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-07 18:23:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-07 18:23:19 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-Jan-07 18:23:19 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Jan-07 18:23:19 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2010-Jan-07 18:23:19 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-Jan-07 18:23:19 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-Jan-07 18:23:19 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:23:19 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02126 J 2010-Jan-07 18:23:19 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:23:19 LOG2 antvel: Parameters to Doppler: Topocentric 80599 2010 7 0.0 2010-Jan-07 18:23:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:23:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-Jan-07 18:23:19 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-Jan-07 18:23:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:23:19 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:23:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Jan-07 18:23:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:23:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2010-Jan-07 18:23:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:23:19 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2010-Jan-07 18:23:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2010-Jan-07 18:23:19 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.096507 2010.0212626752352 18.999933 2010-Jan-07 18:23:19 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333299 30.191666666666677 2010-Jan-07 18:23:19 LOG4 log_alfabeam: ALFABEAM 1 1.233246534180621 30.085534029971051 2010-Jan-07 18:23:19 LOG4 log_alfabeam: ALFABEAM 2 1.239408131056680 30.142191886731926 2010-Jan-07 18:23:19 LOG4 log_alfabeam: ALFABEAM 3 1.239540221214490 30.248333047712066 2010-Jan-07 18:23:19 LOG4 log_alfabeam: ALFABEAM 4 1.233397290768733 30.297826560616116 2010-Jan-07 18:23:19 LOG4 log_alfabeam: ALFABEAM 5 1.227207019341395 30.240561839142718 2010-Jan-07 18:23:19 LOG4 log_alfabeam: ALFABEAM 6 1.227188321184263 30.134415396032193 2010-Jan-07 18:23:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229506 2010-Jan-07 18:23:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:23:20 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2010-Jan-07 18:23:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:23:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Jan-07 18:23:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:23:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:23:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:23:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-Jan-07 18:23:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80601.00 2010-Jan-07 18:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:23:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:23:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:23:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:23:31 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2010-Jan-07 18:23:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:23:31 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2010-Jan-07 18:23:31 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2010-Jan-07 18:23:31 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-Jan-07 18:23:31 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-Jan-07 18:23:31 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:23:31 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02126 J 2010-Jan-07 18:23:31 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:23:31 LOG2 antvel: Parameters to Doppler: Topocentric 80611 2010 7 0.0 2010-Jan-07 18:23:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:23:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-Jan-07 18:23:31 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-Jan-07 18:23:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:23:31 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:23:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Jan-07 18:23:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:23:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2010-Jan-07 18:23:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:23:31 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2010-Jan-07 18:23:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2010-Jan-07 18:23:31 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.099850 2010.0212630554922 18.999933 2010-Jan-07 18:23:31 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333335 30.191666666666670 2010-Jan-07 18:23:31 LOG4 log_alfabeam: ALFABEAM 1 1.233278657175269 30.085530434996031 2010-Jan-07 18:23:31 LOG4 log_alfabeam: ALFABEAM 2 1.239423065449250 30.142501573021299 2010-Jan-07 18:23:31 LOG4 log_alfabeam: ALFABEAM 3 1.239523017583340 30.248648641216736 2010-Jan-07 18:23:31 LOG4 log_alfabeam: ALFABEAM 4 1.233365075699856 30.297829006593922 2010-Jan-07 18:23:31 LOG4 log_alfabeam: ALFABEAM 5 1.227192236703621 30.240249203215377 2010-Jan-07 18:23:31 LOG4 log_alfabeam: ALFABEAM 6 1.227205736114493 30.134102630211345 2010-Jan-07 18:23:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229507 2010-Jan-07 18:23:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:23:32 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2010-Jan-07 18:23:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:23:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Jan-07 18:23:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:23:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:23:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:23:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-Jan-07 18:23:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80613.00 2010-Jan-07 18:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:23:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:23:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:23:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:23:43 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2010-Jan-07 18:23:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:23:43 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2010-Jan-07 18:23:43 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2010-Jan-07 18:23:43 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-Jan-07 18:23:43 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-Jan-07 18:23:43 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:23:43 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02126 J 2010-Jan-07 18:23:43 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:23:43 LOG2 antvel: Parameters to Doppler: Topocentric 80623 2010 7 0.0 2010-Jan-07 18:23:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:23:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-Jan-07 18:23:43 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-Jan-07 18:23:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:23:43 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:23:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Jan-07 18:23:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:23:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2010-Jan-07 18:23:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:23:43 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2010-Jan-07 18:23:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2010-Jan-07 18:23:43 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.103192 2010.0212634357492 18.999933 2010-Jan-07 18:23:43 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333324 30.191666666666670 2010-Jan-07 18:23:43 LOG4 log_alfabeam: ALFABEAM 1 1.233310808837844 30.085528474952064 2010-Jan-07 18:23:43 LOG4 log_alfabeam: ALFABEAM 2 1.239437919129670 30.142812288385127 2010-Jan-07 18:23:43 LOG4 log_alfabeam: ALFABEAM 3 1.239505702993086 30.248963631153845 2010-Jan-07 18:23:43 LOG4 log_alfabeam: ALFABEAM 4 1.233332832553814 30.297829810859081 2010-Jan-07 18:23:43 LOG4 log_alfabeam: ALFABEAM 5 1.227177536830841 30.239935549440339 2010-Jan-07 18:23:43 LOG4 log_alfabeam: ALFABEAM 6 1.227223260304558 30.133790490294778 2010-Jan-07 18:23:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229508 2010-Jan-07 18:23:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:23:44 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2010-Jan-07 18:23:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:23:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Jan-07 18:23:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:23:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:23:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:23:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-Jan-07 18:23:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80625.00 2010-Jan-07 18:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:23:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:23:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:23:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:23:55 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2010-Jan-07 18:23:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:23:55 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2010-Jan-07 18:23:55 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2010-Jan-07 18:23:55 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-Jan-07 18:23:55 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-Jan-07 18:23:55 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:23:55 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02126 J 2010-Jan-07 18:23:55 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:23:55 LOG2 antvel: Parameters to Doppler: Topocentric 80635 2010 7 0.0 2010-Jan-07 18:23:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:23:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-Jan-07 18:23:55 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-Jan-07 18:23:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:23:55 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:23:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Jan-07 18:23:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:23:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2010-Jan-07 18:23:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:23:55 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2010-Jan-07 18:23:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2010-Jan-07 18:23:55 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.106535 2010.0212638160062 18.999933 2010-Jan-07 18:23:55 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333293 30.191666666666674 2010-Jan-07 18:23:55 LOG4 log_alfabeam: ALFABEAM 1 1.233343007131483 30.085528154411712 2010-Jan-07 18:23:55 LOG4 log_alfabeam: ALFABEAM 2 1.239452700068597 30.143124209056900 2010-Jan-07 18:23:55 LOG4 log_alfabeam: ALFABEAM 3 1.239488267437201 30.249278190377161 2010-Jan-07 18:23:55 LOG4 log_alfabeam: ALFABEAM 4 1.233300543322932 30.297828968223257 2010-Jan-07 18:23:55 LOG4 log_alfabeam: ALFABEAM 5 1.227162911838430 30.239620700120081 2010-Jan-07 18:23:55 LOG4 log_alfabeam: ALFABEAM 6 1.227240903862164 30.133478804967066 2010-Jan-07 18:23:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229509 2010-Jan-07 18:23:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:23:56 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2010-Jan-07 18:23:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:23:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Jan-07 18:23:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:23:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:23:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:23:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-Jan-07 18:23:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80637.00 2010-Jan-07 18:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:23:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:24:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:24:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:24:07 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2010-Jan-07 18:24:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:24:07 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2010-Jan-07 18:24:07 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2010-Jan-07 18:24:07 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-Jan-07 18:24:07 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-Jan-07 18:24:07 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:24:07 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02126 J 2010-Jan-07 18:24:07 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:24:07 LOG2 antvel: Parameters to Doppler: Topocentric 80647 2010 7 0.0 2010-Jan-07 18:24:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:24:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-Jan-07 18:24:07 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-Jan-07 18:24:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:24:07 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:24:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Jan-07 18:24:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:24:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2010-Jan-07 18:24:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:24:07 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2010-Jan-07 18:24:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2010-Jan-07 18:24:07 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.109877 2010.0212641962635 18.999933 2010-Jan-07 18:24:07 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333310 30.191666666666677 2010-Jan-07 18:24:07 LOG4 log_alfabeam: ALFABEAM 1 1.233375231506266 30.085529479130798 2010-Jan-07 18:24:07 LOG4 log_alfabeam: ALFABEAM 2 1.239467398510893 30.143437138543419 2010-Jan-07 18:24:07 LOG4 log_alfabeam: ALFABEAM 3 1.239470721717552 30.249592115057251 2010-Jan-07 18:24:07 LOG4 log_alfabeam: ALFABEAM 4 1.233268228621754 30.297826473703896 2010-Jan-07 18:24:07 LOG4 log_alfabeam: ALFABEAM 5 1.227148371381811 30.239304853793833 2010-Jan-07 18:24:07 LOG4 log_alfabeam: ALFABEAM 6 1.227258655837173 30.133167776166307 2010-Jan-07 18:24:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229510 2010-Jan-07 18:24:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:24:08 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2010-Jan-07 18:24:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:24:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Jan-07 18:24:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:24:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:24:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:24:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-Jan-07 18:24:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80649.00 2010-Jan-07 18:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:24:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:24:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:24:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:24:19 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2010-Jan-07 18:24:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:24:19 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2010-Jan-07 18:24:19 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2010-Jan-07 18:24:19 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-Jan-07 18:24:19 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-Jan-07 18:24:19 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:24:19 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02126 J 2010-Jan-07 18:24:19 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:24:19 LOG2 antvel: Parameters to Doppler: Topocentric 80659 2010 7 0.0 2010-Jan-07 18:24:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:24:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-Jan-07 18:24:19 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-Jan-07 18:24:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:24:19 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:24:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Jan-07 18:24:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:24:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2010-Jan-07 18:24:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:24:19 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-Jan-07 18:24:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2010-Jan-07 18:24:19 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.113219 2010.0212645765205 18.999933 2010-Jan-07 18:24:19 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333317 30.191666666666670 2010-Jan-07 18:24:19 LOG4 log_alfabeam: ALFABEAM 1 1.233407490292667 30.085532454149234 2010-Jan-07 18:24:19 LOG4 log_alfabeam: ALFABEAM 2 1.239482017983789 30.143751159932577 2010-Jan-07 18:24:19 LOG4 log_alfabeam: ALFABEAM 3 1.239453061022043 30.249905483740349 2010-Jan-07 18:24:19 LOG4 log_alfabeam: ALFABEAM 4 1.233235880102622 30.297822321993173 2010-Jan-07 18:24:19 LOG4 log_alfabeam: ALFABEAM 5 1.227133911973246 30.238987926789378 2010-Jan-07 18:24:19 LOG4 log_alfabeam: ALFABEAM 6 1.227276521080245 30.132857326025967 2010-Jan-07 18:24:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229511 2010-Jan-07 18:24:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:24:20 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-Jan-07 18:24:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:24:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Jan-07 18:24:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:24:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:24:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:24:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-Jan-07 18:24:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80661.00 2010-Jan-07 18:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:24:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:24:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:24:31 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-Jan-07 18:24:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:24:31 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-Jan-07 18:24:31 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2010-Jan-07 18:24:31 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-Jan-07 18:24:31 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-Jan-07 18:24:31 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:24:31 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02126 J 2010-Jan-07 18:24:31 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:24:31 LOG2 antvel: Parameters to Doppler: Topocentric 80671 2010 7 0.0 2010-Jan-07 18:24:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:24:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-Jan-07 18:24:31 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-Jan-07 18:24:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:24:31 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:24:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Jan-07 18:24:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:24:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2010-Jan-07 18:24:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:24:31 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-Jan-07 18:24:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2010-Jan-07 18:24:31 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.116562 2010.0212649567775 18.999933 2010-Jan-07 18:24:31 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333308 30.191666666666670 2010-Jan-07 18:24:31 LOG4 log_alfabeam: ALFABEAM 1 1.233439791853387 30.085537086298629 2010-Jan-07 18:24:31 LOG4 log_alfabeam: ALFABEAM 2 1.239496561926437 30.144066357448157 2010-Jan-07 18:24:31 LOG4 log_alfabeam: ALFABEAM 3 1.239435280416707 30.250218374318237 2010-Jan-07 18:24:31 LOG4 log_alfabeam: ALFABEAM 4 1.233203489386359 30.297816505984869 2010-Jan-07 18:24:31 LOG4 log_alfabeam: ALFABEAM 5 1.227119530215264 30.238669834311512 2010-Jan-07 18:24:31 LOG4 log_alfabeam: ALFABEAM 6 1.227294504562225 30.132547377356275 2010-Jan-07 18:24:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229512 2010-Jan-07 18:24:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:24:32 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-Jan-07 18:24:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:24:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Jan-07 18:24:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:24:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:24:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:24:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-Jan-07 18:24:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80673.00 2010-Jan-07 18:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:24:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:24:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:24:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:24:43 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-Jan-07 18:24:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:24:43 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-Jan-07 18:24:43 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-Jan-07 18:24:43 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-07 18:24:43 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-07 18:24:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-07 18:24:43 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-Jan-07 18:24:43 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-07 18:24:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-07 18:24:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-07 18:24:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-07 18:24:43 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-Jan-07 18:24:43 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2010-Jan-07 18:24:43 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-Jan-07 18:24:43 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-Jan-07 18:24:43 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:24:43 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02127 J 2010-Jan-07 18:24:43 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:24:43 LOG2 antvel: Parameters to Doppler: Topocentric 80683 2010 7 0.0 2010-Jan-07 18:24:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:24:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-Jan-07 18:24:43 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-Jan-07 18:24:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:24:43 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:24:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Jan-07 18:24:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:24:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2010-Jan-07 18:24:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:24:43 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2010-Jan-07 18:24:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2010-Jan-07 18:24:43 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.119904 2010.0212653370345 18.999933 2010-Jan-07 18:24:43 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333294 30.191666666666677 2010-Jan-07 18:24:43 LOG4 log_alfabeam: ALFABEAM 1 1.233472115549892 30.085543377821065 2010-Jan-07 18:24:43 LOG4 log_alfabeam: ALFABEAM 2 1.239511020744549 30.144382532123192 2010-Jan-07 18:24:43 LOG4 log_alfabeam: ALFABEAM 3 1.239417390956509 30.250530583993307 2010-Jan-07 18:24:43 LOG4 log_alfabeam: ALFABEAM 4 1.233171077174787 30.297809024227337 2010-Jan-07 18:24:43 LOG4 log_alfabeam: ALFABEAM 5 1.227105235597373 30.238350777351307 2010-Jan-07 18:24:43 LOG4 log_alfabeam: ALFABEAM 6 1.227312595083272 30.132238131008755 2010-Jan-07 18:24:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229513 2010-Jan-07 18:24:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:24:44 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2010-Jan-07 18:24:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:24:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Jan-07 18:24:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:24:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:24:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:24:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-Jan-07 18:24:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80685.00 2010-Jan-07 18:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:24:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:24:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:24:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:24:55 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2010-Jan-07 18:24:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:24:55 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2010-Jan-07 18:24:55 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2010-Jan-07 18:24:55 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-Jan-07 18:24:55 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-Jan-07 18:24:55 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:24:55 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02127 J 2010-Jan-07 18:24:55 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:24:55 LOG2 antvel: Parameters to Doppler: Topocentric 80695 2010 7 0.0 2010-Jan-07 18:24:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:24:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-Jan-07 18:24:55 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-Jan-07 18:24:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:24:55 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:24:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Jan-07 18:24:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:24:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2010-Jan-07 18:24:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:24:55 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2010-Jan-07 18:24:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2010-Jan-07 18:24:55 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.123247 2010.0212657172915 18.999933 2010-Jan-07 18:24:55 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333305 30.191666666666688 2010-Jan-07 18:24:55 LOG4 log_alfabeam: ALFABEAM 1 1.233504479403509 30.085551337308988 2010-Jan-07 18:24:55 LOG4 log_alfabeam: ALFABEAM 2 1.239525402204566 30.144699862602494 2010-Jan-07 18:24:55 LOG4 log_alfabeam: ALFABEAM 3 1.239399382368970 30.250842284011412 2010-Jan-07 18:24:55 LOG4 log_alfabeam: ALFABEAM 4 1.233138625403629 30.297799867499382 2010-Jan-07 18:24:55 LOG4 log_alfabeam: ALFABEAM 5 1.227091020443573 30.238030575830457 2010-Jan-07 18:24:55 LOG4 log_alfabeam: ALFABEAM 6 1.227330803013078 30.131929417320055 2010-Jan-07 18:24:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229514 2010-Jan-07 18:24:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:24:56 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2010-Jan-07 18:24:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:24:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Jan-07 18:24:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:24:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:24:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:24:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-Jan-07 18:24:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80697.00 2010-Jan-07 18:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:24:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:25:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:25:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:25:07 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2010-Jan-07 18:25:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:25:07 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2010-Jan-07 18:25:07 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2010-Jan-07 18:25:07 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-Jan-07 18:25:07 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-Jan-07 18:25:07 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:25:07 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02127 J 2010-Jan-07 18:25:07 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:25:07 LOG2 antvel: Parameters to Doppler: Topocentric 80707 2010 7 0.0 2010-Jan-07 18:25:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:25:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-Jan-07 18:25:07 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-Jan-07 18:25:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:25:07 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:25:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Jan-07 18:25:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:25:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2010-Jan-07 18:25:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:25:07 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2010-Jan-07 18:25:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2010-Jan-07 18:25:07 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.126589 2010.0212660975487 18.999933 2010-Jan-07 18:25:07 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333336 30.191666666666670 2010-Jan-07 18:25:07 LOG4 log_alfabeam: ALFABEAM 1 1.233536862721737 30.085560964636084 2010-Jan-07 18:25:07 LOG4 log_alfabeam: ALFABEAM 2 1.239539696823322 30.145018148307436 2010-Jan-07 18:25:07 LOG4 log_alfabeam: ALFABEAM 3 1.239381265876637 30.251153272327077 2010-Jan-07 18:25:07 LOG4 log_alfabeam: ALFABEAM 4 1.233106154827860 30.297789036728691 2010-Jan-07 18:25:07 LOG4 log_alfabeam: ALFABEAM 5 1.227076894129033 30.237709432335709 2010-Jan-07 18:25:07 LOG4 log_alfabeam: ALFABEAM 6 1.227349116986785 30.131621436353626 2010-Jan-07 18:25:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229515 2010-Jan-07 18:25:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:25:08 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2010-Jan-07 18:25:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:25:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Jan-07 18:25:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:25:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:25:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:25:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-Jan-07 18:25:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80709.00 2010-Jan-07 18:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:25:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:25:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:25:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:25:19 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2010-Jan-07 18:25:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:25:19 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2010-Jan-07 18:25:19 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2010-Jan-07 18:25:19 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-Jan-07 18:25:19 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-Jan-07 18:25:19 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:25:19 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02127 J 2010-Jan-07 18:25:19 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:25:19 LOG2 antvel: Parameters to Doppler: Topocentric 80719 2010 7 0.0 2010-Jan-07 18:25:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:25:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-Jan-07 18:25:19 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-Jan-07 18:25:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:25:19 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:25:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Jan-07 18:25:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:25:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2010-Jan-07 18:25:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:25:19 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2010-Jan-07 18:25:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2010-Jan-07 18:25:19 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.129932 2010.0212664778057 18.999933 2010-Jan-07 18:25:19 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333349 30.191666666666670 2010-Jan-07 18:25:19 LOG4 log_alfabeam: ALFABEAM 1 1.233569283545326 30.085572270009159 2010-Jan-07 18:25:19 LOG4 log_alfabeam: ALFABEAM 2 1.239553912283275 30.145337568813542 2010-Jan-07 18:25:19 LOG4 log_alfabeam: ALFABEAM 3 1.239363031102206 30.251463719502205 2010-Jan-07 18:25:19 LOG4 log_alfabeam: ALFABEAM 4 1.233073647364179 30.297776521074969 2010-Jan-07 18:25:19 LOG4 log_alfabeam: ALFABEAM 5 1.227062849063181 30.237387165871098 2010-Jan-07 18:25:19 LOG4 log_alfabeam: ALFABEAM 6 1.227367547476932 30.131314019147307 2010-Jan-07 18:25:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229516 2010-Jan-07 18:25:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:25:20 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2010-Jan-07 18:25:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:25:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Jan-07 18:25:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:25:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:25:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:25:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-Jan-07 18:25:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80721.00 2010-Jan-07 18:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:25:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:25:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:25:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:25:31 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2010-Jan-07 18:25:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:25:31 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2010-Jan-07 18:25:31 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2010-Jan-07 18:25:31 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-Jan-07 18:25:31 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-Jan-07 18:25:31 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:25:31 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02127 J 2010-Jan-07 18:25:31 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:25:31 LOG2 antvel: Parameters to Doppler: Topocentric 80731 2010 7 0.0 2010-Jan-07 18:25:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:25:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-Jan-07 18:25:31 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-Jan-07 18:25:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:25:31 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:25:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Jan-07 18:25:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:25:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2010-Jan-07 18:25:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:25:31 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2010-Jan-07 18:25:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2010-Jan-07 18:25:31 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.133274 2010.0212668580627 18.999933 2010-Jan-07 18:25:31 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333323 30.191666666666677 2010-Jan-07 18:25:31 LOG4 log_alfabeam: ALFABEAM 1 1.233601721132048 30.085585250914413 2010-Jan-07 18:25:31 LOG4 log_alfabeam: ALFABEAM 2 1.239568039215621 30.145657921962211 2010-Jan-07 18:25:31 LOG4 log_alfabeam: ALFABEAM 3 1.239344689434690 30.251773424294910 2010-Jan-07 18:25:31 LOG4 log_alfabeam: ALFABEAM 4 1.233041123816522 30.297762323864166 2010-Jan-07 18:25:31 LOG4 log_alfabeam: ALFABEAM 5 1.227048894503878 30.237063980586274 2010-Jan-07 18:25:31 LOG4 log_alfabeam: ALFABEAM 6 1.227386082954993 30.131007364925651 2010-Jan-07 18:25:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229517 2010-Jan-07 18:25:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:25:32 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2010-Jan-07 18:25:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:25:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Jan-07 18:25:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:25:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:25:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:25:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-Jan-07 18:25:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80733.00 2010-Jan-07 18:25:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:25:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:25:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:25:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:25:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:25:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:25:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:25:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:25:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:25:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:25:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:25:43 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2010-Jan-07 18:25:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:25:43 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2010-Jan-07 18:25:43 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2010-Jan-07 18:25:43 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-Jan-07 18:25:43 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-Jan-07 18:25:43 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:25:43 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02127 J 2010-Jan-07 18:25:43 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:25:43 LOG2 antvel: Parameters to Doppler: Topocentric 80743 2010 7 0.0 2010-Jan-07 18:25:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:25:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-Jan-07 18:25:43 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-Jan-07 18:25:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:25:43 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:25:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Jan-07 18:25:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:25:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2010-Jan-07 18:25:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:25:43 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-Jan-07 18:25:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2010-Jan-07 18:25:43 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.136617 2010.0212672383198 18.999933 2010-Jan-07 18:25:43 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333309 30.191666666666677 2010-Jan-07 18:25:43 LOG4 log_alfabeam: ALFABEAM 1 1.233634193539956 30.085599919175870 2010-Jan-07 18:25:43 LOG4 log_alfabeam: ALFABEAM 2 1.239582085217652 30.145979388239642 2010-Jan-07 18:25:43 LOG4 log_alfabeam: ALFABEAM 3 1.239326230393167 30.252082556560069 2010-Jan-07 18:25:43 LOG4 log_alfabeam: ALFABEAM 4 1.233008566085048 30.297746432633893 2010-Jan-07 18:25:43 LOG4 log_alfabeam: ALFABEAM 5 1.227035022947286 30.236739694587680 2010-Jan-07 18:25:43 LOG4 log_alfabeam: ALFABEAM 6 1.227404733995513 30.130701305450192 2010-Jan-07 18:25:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229518 2010-Jan-07 18:25:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:25:44 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-Jan-07 18:25:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:25:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Jan-07 18:25:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:25:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:25:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:25:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-Jan-07 18:25:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80745.00 2010-Jan-07 18:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:25:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:25:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:25:55 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-Jan-07 18:25:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:25:55 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-Jan-07 18:25:55 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2010-Jan-07 18:25:55 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-Jan-07 18:25:55 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-Jan-07 18:25:55 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:25:55 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02127 J 2010-Jan-07 18:25:55 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:25:55 LOG2 antvel: Parameters to Doppler: Topocentric 80755 2010 7 0.0 2010-Jan-07 18:25:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:25:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-Jan-07 18:25:55 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-Jan-07 18:25:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:25:55 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:25:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Jan-07 18:25:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:25:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2010-Jan-07 18:25:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-07 18:25:55 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-Jan-07 18:25:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2010-Jan-07 18:25:55 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 1.139959 2010.0212676185768 18.999933 2010-Jan-07 18:25:55 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333318 30.191666666666674 2010-Jan-07 18:25:55 LOG4 log_alfabeam: ALFABEAM 1 1.233666679981241 30.085616269874581 2010-Jan-07 18:25:55 LOG4 log_alfabeam: ALFABEAM 2 1.239596041037741 30.146301763940297 2010-Jan-07 18:25:55 LOG4 log_alfabeam: ALFABEAM 3 1.239307665531761 30.252390915910670 2010-Jan-07 18:25:55 LOG4 log_alfabeam: ALFABEAM 4 1.232975995018144 30.297728853125751 2010-Jan-07 18:25:55 LOG4 log_alfabeam: ALFABEAM 5 1.227021243530831 30.236414513553907 2010-Jan-07 18:25:55 LOG4 log_alfabeam: ALFABEAM 6 1.227423488907377 30.130396039055942 2010-Jan-07 18:25:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 229519 2010-Jan-07 18:25:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-07 18:25:56 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-Jan-07 18:25:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:25:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Jan-07 18:25:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:25:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:25:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:25:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-Jan-07 18:25:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80757.00 2010-Jan-07 18:25:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:25:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:25:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:25:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:25:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:25:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:25:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:25:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:25:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:26:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:26:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-07 18:26:07 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-Jan-07 18:26:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-07 18:26:07 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-Jan-07 18:26:07 INFO2 smartfreq: Switching off CAL 2010-Jan-07 18:26:07 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-07 18:26:07 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-07 18:26:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-07 18:26:07 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-Jan-07 18:26:07 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-07 18:26:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-07 18:26:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-07 18:26:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-07 18:26:07 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-Jan-07 18:26:07 INFO3 restore_frequencies: Restoring original frequencies 2010-Jan-07 18:26:07 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:26:07 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02127 J 2010-Jan-07 18:26:07 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:26:07 LOG2 antvel: Parameters to Doppler: Topocentric 80767 2010 7 0.0 2010-Jan-07 18:26:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:26:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2010-Jan-07 18:26:07 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2010-Jan-07 18:26:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:26:07 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:26:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Jan-07 18:26:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:26:07 STOP finish_task: Finishing task 'smart frequency switching' 2010-Jan-07 18:26:07 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-Jan-07 18:26:07 DONE finish_task: DONE finished pattern: smart frequency switching 2010-Jan-07 18:26:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-07 18:26:07 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2010-Jan-07 18:26:07 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2010-Jan-07 18:26:07 COMMAND run_command_line: EXECUTING command 27: 'LOAD ages_mock.conf' 2010-Jan-07 18:26:07 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Jan-07 18:26:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Jan-07 18:26:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:26:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:26:08 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-07 18:26:08 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Jan-07 18:26:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:26:08 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2010-Jan-07 18:26:08 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2010-Jan-07 18:26:08 LOG2 CIMA-antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02127 J 2010-Jan-07 18:26:08 LOG2 CIMA-antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:26:08 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 80767 2010 7 0.0 2010-Jan-07 18:26:08 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:26:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Jan-07 18:26:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Jan-07 18:26:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Jan-07 18:26:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Jan-07 18:26:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Jan-07 18:26:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2010-Jan-07 18:26:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Jan-07 18:26:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2010-Jan-07 18:26:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2010-Jan-07 18:26:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2010-Jan-07 18:26:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2010-Jan-07 18:26:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2010-Jan-07 18:26:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2010-Jan-07 18:26:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2010-Jan-07 18:26:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2010-Jan-07 18:26:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2010-Jan-07 18:26:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Jan-07 18:26:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Jan-07 18:26:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Jan-07 18:26:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Jan-07 18:26:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Jan-07 18:26:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2010-Jan-07 18:26:10 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2010-Jan-07 18:26:11 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-07 18:26:11 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Jan-07 18:26:11 LOG5 begin_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2010-Jan-07 18:26:11 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Jan-07 18:26:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Jan-07 18:26:11 LOG1 config_iflo: Receiver ALFA already selected 2010-Jan-07 18:26:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 18:26:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-07 18:26:11 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 18:26:11 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-Jan-07 18:26:12 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 18:26:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 18:26:12 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-Jan-07 18:26:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 18:26:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-07 18:26:12 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-Jan-07 18:26:12 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-Jan-07 18:26:12 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Jan-07 18:26:12 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Jan-07 18:26:12 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-Jan-07 18:26:12 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-Jan-07 18:26:12 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-Jan-07 18:26:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2010-Jan-07 18:26:12 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-Jan-07 18:26:12 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-Jan-07 18:26:12 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Jan-07 18:26:12 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Jan-07 18:26:12 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Jan-07 18:26:12 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Jan-07 18:26:12 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Jan-07 18:26:12 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-Jan-07 18:26:12 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-Jan-07 18:26:12 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-Jan-07 18:26:12 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-Jan-07 18:26:12 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Jan-07 18:26:12 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-Jan-07 18:26:12 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-Jan-07 18:26:12 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Jan-07 18:26:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:26:12 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-Jan-07 18:26:12 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-Jan-07 18:26:12 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Jan-07 18:26:12 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-Jan-07 18:26:12 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-Jan-07 18:26:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Jan-07 18:26:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:26:12 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Jan-07 18:26:12 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2010-Jan-07 18:26:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2010-Jan-07 18:26:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Jan-07 18:26:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:26:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:26:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:26:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:26:12 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-Jan-07 18:26:12 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Jan-07 18:26:12 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2010-Jan-07 18:26:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Jan-07 18:26:12 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Jan-07 18:26:12 LOG5 finish_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2010-Jan-07 18:26:12 DONE finish_task: DONE finished configuration: IF/LO path 2010-Jan-07 18:26:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-07 18:26:12 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Jan-07 18:26:12 LOG5 end_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2010-Jan-07 18:26:12 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Jan-07 18:26:12 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2010-Jan-07 18:26:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Jan-07 18:26:12 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Jan-07 18:26:12 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Jan-07 18:26:12 START begin_task: Starting task 'selecting calibration port' 2010-Jan-07 18:26:12 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2010-Jan-07 18:26:12 LOG3 vw_send: To DATATAKING: calport 3 2010-Jan-07 18:26:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Jan-07 18:26:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:26:12 START begin_task: Starting task 'waiting on calport' 2010-Jan-07 18:26:12 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2010-Jan-07 18:26:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:26:12 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Jan-07 18:26:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:26:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:26:13 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 18:26:13 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Jan-07 18:26:13 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2010-Jan-07 18:26:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Jan-07 18:26:13 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Jan-07 18:26:13 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2010-Jan-07 18:26:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-07 18:26:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-07 18:26:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-07 18:26:13 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2010-Jan-07 18:26:13 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-07 18:26:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:26:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-07 18:26:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-07 18:26:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-07 18:26:13 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2010-Jan-07 18:26:13 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Jan-07 18:26:13 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Jan-07 18:26:13 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Jan-07 18:26:13 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Jan-07 18:26:13 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Jan-07 18:26:13 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Jan-07 18:26:13 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Jan-07 18:26:13 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Jan-07 18:26:13 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2010-Jan-07 18:26:13 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2010-Jan-07 18:26:13 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2010-Jan-07 18:26:13 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2010-Jan-07 18:26:13 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Jan-07 18:26:13 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Jan-07 18:26:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-07 18:26:13 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-Jan-07 18:26:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Jan-07 18:26:13 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-07 18:26:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Jan-07 18:26:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-07 18:26:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2010-Jan-07 18:26:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-07 18:26:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-07 18:26:13 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-Jan-07 18:26:13 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-Jan-07 18:26:13 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Jan-07 18:26:13 LOG5 finish_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2010-Jan-07 18:26:13 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Jan-07 18:26:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-07 18:26:13 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Jan-07 18:26:13 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2010-Jan-07 18:26:13 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2010-Jan-07 18:26:13 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2010-Jan-07 18:26:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2010-Jan-07 18:26:13 INFO1 config_mock: Starting to configure the Mock spectrometer 2010-Jan-07 18:26:13 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Jan-07 18:26:13 START begin_task: Starting task 'selecting calibration port' 2010-Jan-07 18:26:13 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2010-Jan-07 18:26:13 LOG3 vw_send: To DATATAKING: calport 3 2010-Jan-07 18:26:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Jan-07 18:26:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:26:13 START begin_task: Starting task 'waiting on calport' 2010-Jan-07 18:26:13 LOG5 begin_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2010-Jan-07 18:26:13 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Jan-07 18:26:14 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Jan-07 18:26:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:26:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:26:14 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 18:26:14 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Jan-07 18:26:14 LOG5 end_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2010-Jan-07 18:26:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Jan-07 18:26:14 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Jan-07 18:26:14 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2010-Jan-07 18:26:14 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-07 18:26:14 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-07 18:26:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-07 18:26:14 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2010-Jan-07 18:26:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:26:14 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-07 18:26:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-07 18:26:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-07 18:26:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-07 18:26:14 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2010-Jan-07 18:26:14 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Jan-07 18:26:14 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Jan-07 18:26:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-07 18:26:14 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2010-Jan-07 18:26:14 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-07 18:26:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-07 18:26:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-07 18:26:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-07 18:26:14 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2010-Jan-07 18:26:14 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2010-Jan-07 18:26:14 LOG3 socket_wait: To MOCK: NOP 2010-Jan-07 18:26:14 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2010-Jan-07 18:26:14 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2010-Jan-07 18:26:14 ALERT got_mock_message: Mock spectrometer restarting 2010-Jan-07 18:26:14 LOG4 from_mock: From MOCK: nop ok 2010-Jan-07 18:26:14 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2010-Jan-07 18:26:14 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2010-Jan-07 18:26:14 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2010-Jan-07 18:26:14 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2010-Jan-07 18:26:14 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2010-Jan-07 18:26:14 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2010-Jan-07 18:26:14 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2010-Jan-07 18:26:14 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2010-Jan-07 18:26:14 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2010-Jan-07 18:26:14 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2010-Jan-07 18:26:14 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2010-Jan-07 18:26:14 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2010-Jan-07 18:26:14 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2010-Jan-07 18:26:14 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2010-Jan-07 18:26:14 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2010-Jan-07 18:26:14 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2010-Jan-07 18:26:14 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2010-Jan-07 18:26:14 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2010-Jan-07 18:26:14 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2010-Jan-07 18:26:14 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2010-Jan-07 18:26:14 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2010-Jan-07 18:26:14 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2010-Jan-07 18:26:14 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2010-Jan-07 18:26:14 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2010-Jan-07 18:26:14 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2010-Jan-07 18:26:14 LOG4 from_mock: From MOCK: confok 2010-Jan-07 18:26:14 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2010-Jan-07 18:26:14 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2010-Jan-07 18:26:14 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2010-Jan-07 18:26:14 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2010-Jan-07 18:26:14 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2010-Jan-07 18:26:14 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2010-Jan-07 18:26:14 LOG5 begin_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2010-Jan-07 18:26:14 LOG4 from_mock: From MOCK: confok 2010-Jan-07 18:26:14 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2010-Jan-07 18:26:14 LOG5 end_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2010-Jan-07 18:26:14 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2010-Jan-07 18:26:14 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2010-Jan-07 18:26:14 LOG5 finish_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2010-Jan-07 18:26:14 DONE finish_task: DONE finished configuring: the Mock spectrometer 2010-Jan-07 18:26:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-07 18:26:15 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2010-Jan-07 18:26:15 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2010-Jan-07 18:26:15 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2010-Jan-07 18:26:15 COMMAND run_command_line: EXECUTING command 28: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2010-Jan-07 18:26:15 COMMAND run_command_line: EXECUTING command 29: 'CATALOG AGESFull.cat' 2010-Jan-07 18:26:15 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2010-Jan-07 18:26:15 COMMAND run_command_line: EXECUTING command 32: 'IF LSTSLEW(AGES33PP_p1_091) < 011234 THEN' 2010-Jan-07 18:26:15 LOG3 is_if_valid: Current source data: up 195.8 12.6 UP - - 84 0.4 2010-Jan-07 18:26:15 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES33PP_p1_091) < 011234 2010-Jan-07 18:26:15 INFO5 is_if_valid: Condition parsed as: 1.1519176666666666 < 1.2094444444444443 2010-Jan-07 18:26:15 COMMAND run_command_line: EXECUTING command 33: 'FIXEDDRIFT az=192.10 alfaangle=7.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_091 ra=12400.00 dec=302500.00' 2010-Jan-07 18:26:16 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-Jan-07 18:26:16 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-07 18:26:16 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 192.10 7.6 hcorcal 5 tracking no off lcorcal first 1 AGES33PP_p1_091 12400.00 302500.00 J 8500.0 Heliocentric velocity(optical)' 2010-Jan-07 18:26:16 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-Jan-07 18:26:16 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2010-Jan-07 18:26:16 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'galfasrc' 2010-Jan-07 18:26:16 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-Jan-07 18:26:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES33PP_p1_091} 2010-Jan-07 18:26:16 INFO3 fixed_driftmap: Sending telescope to Az = 192.10 and ZA = 12.42 2010-Jan-07 18:26:16 LOG3 track_source: Calling 'track_source AGES33PP_p1_091 192.10 12.4211998179 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-Jan-07 18:26:16 START begin_task: Starting task 'sending tracking commands' 2010-Jan-07 18:26:16 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2010-Jan-07 18:26:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p1_091} INFO {Slewing to source 'AGES33PP_p1_091' ...} 2010-Jan-07 18:26:17 INFO1 track_source: Starting to track AGES33PP_p1_091 2010-Jan-07 18:26:17 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p1_091" 2010-Jan-07 18:26:17 LOG3 vw_send: To DATATAKING: set ra 192.10 2010-Jan-07 18:26:17 LOG3 vw_send: To DATATAKING: set dec 12.4211998179 2010-Jan-07 18:26:17 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-07 18:26:17 LOG3 vw_send: To DATATAKING: pnt tr 192.10 12.4211998179 -CF 2010-Jan-07 18:26:17 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 18:26:17 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-07 18:26:17 LOG5 finish_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2010-Jan-07 18:26:17 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-07 18:26:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 18:26:17 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-07 18:26:17 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2010-Jan-07 18:26:17 START begin_task: Starting task 'rotate ALFA to +7.6 degrees' 2010-Jan-07 18:26:17 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2010-Jan-07 18:26:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +7.6 degrees ...} 2010-Jan-07 18:26:17 INFO2 rotate_alfa: ALFA commanded to +7.6 degrees 2010-Jan-07 18:26:17 LOG3 sock_errsend: To ALFAMOTOR: POSITION 7.6 REPLY 2010-Jan-07 18:26:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Jan-07 18:26:17 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Jan-07 18:26:17 LOG5 begin_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2010-Jan-07 18:26:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p1_091" 2010-Jan-07 18:26:17 LOG4 got_cormsg: From DATATAKING: set ra 192.10 2010-Jan-07 18:26:17 LOG4 got_cormsg: From DATATAKING: set dec 12.4211998179 2010-Jan-07 18:26:17 LOG4 got_cormsg: From DATATAKING: vw% 192.10 2010-Jan-07 18:26:17 LOG4 got_cormsg: From DATATAKING: vw% 12.4211998179 2010-Jan-07 18:26:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:26:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-07 18:26:17 LOG4 got_cormsg: From DATATAKING: pnt tr 192.10 12.4211998179 -CF 2010-Jan-07 18:26:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 18:26:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Jan-07 18:26:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:26:24 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Jan-07 18:26:24 INFO3 alfa_motor: ALFA rotator in-position +7.60 degrees 2010-Jan-07 18:26:24 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Jan-07 18:26:24 LOG5 end_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2010-Jan-07 18:26:24 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-07 18:26:24 STOP finish_task: Finishing task 'rotate ALFA to +7.6 degrees' 2010-Jan-07 18:26:24 LOG5 finish_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2010-Jan-07 18:26:24 INFO2 finish_task: DONE finished configuration: rotating ALFA to +7.6 degrees 2010-Jan-07 18:26:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 18:26:24 STOP end_task: Finishing task 'rotate ALFA to +7.6 degrees' with status 'OK' 2010-Jan-07 18:26:24 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2010-Jan-07 18:26:24 START begin_task: Starting task 'waiting on telescope' 2010-Jan-07 18:26:24 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2010-Jan-07 18:26:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Jan-07 18:26:24 LOG3 waittrk: Start waittrk 5 2010-Jan-07 18:26:24 START begin_task: Starting task 'waiting on telescope movement' 2010-Jan-07 18:26:24 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2010-Jan-07 18:26:28 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 18:26:28.301 (seconds: 66388.301)!} 2010-Jan-07 18:26:28 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 18:26:28.301 (seconds: 66388.301)! 2010-Jan-07 18:26:29 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Jan-07 18:26:29 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2010-Jan-07 18:26:29 START begin_task: Starting task 'waiting on telescope on source' 2010-Jan-07 18:26:29 LOG5 begin_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2010-Jan-07 18:26:49 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Jan-07 18:26:49 LOG5 end_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2010-Jan-07 18:26:49 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-07 18:26:49 INFO2 waittrk: Now tracking AGES33PP_p1_091 2010-Jan-07 18:26:49 LOG4 waittrk: Current telescope position: Az = 191.79 ZA = 12.45 2010-Jan-07 18:26:49 STOP finish_task: Finishing task 'waiting on telescope' 2010-Jan-07 18:26:49 LOG5 finish_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2010-Jan-07 18:26:49 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Jan-07 18:26:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 18:26:49 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Jan-07 18:26:49 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2010-Jan-07 18:26:49 START begin_task: Starting task 'selecting calibration type' 2010-Jan-07 18:26:49 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2010-Jan-07 18:26:49 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-07 18:26:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-07 18:26:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:26:49 START begin_task: Starting task 'waiting on setcal' 2010-Jan-07 18:26:49 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2010-Jan-07 18:26:49 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-07 18:26:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:26:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:26:49 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 18:26:49 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-07 18:26:49 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2010-Jan-07 18:26:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-07 18:26:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 18:26:49 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-07 18:26:49 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 18:26:49 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2010-Jan-07 18:26:49 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 18:26:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 18:26:49 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2010-Jan-07 18:26:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 18:26:49 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-07 18:26:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 18:26:49 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-07 18:26:49 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 18:26:49 LOG5 begin_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2010-Jan-07 18:26:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:26:49 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 18:26:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 18:26:49 LOG5 end_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2010-Jan-07 18:26:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 18:26:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-07 18:26:49 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-07 18:26:49 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2010-Jan-07 18:26:49 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2010-Jan-07 18:26:49 INFO2 astwait: Waiting for 137 seconds from 22:26:49 to 22:29:06 UTC ... 2010-Jan-07 18:26:49 LOG4 send_obs_status: To obs_status: <1> TASKTIME 137 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Jan-07 18:26:49 START begin_task: Starting task 'waiting on waiting for AST time' 2010-Jan-07 18:26:49 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2010-Jan-07 18:29:06 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2010-Jan-07 18:29:06 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2010-Jan-07 18:29:06 INFO3 astwait: Finished waiting 2010-Jan-07 18:29:06 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Jan-07 18:29:06 LOG5 dopset_later: Calling 'dopset_later 60.519494000391575' 2010-Jan-07 18:29:06 INFO3 dopset_later: Setting Doppler correction for 18:30:06 (60.5 seconds from now) 2010-Jan-07 18:29:06 LOG5 antvel: Calling 'antvel 192.100000 12.421200 F Heliocentric 60.519494000391575' 2010-Jan-07 18:29:06 LOG2 antvel: Transforming current Az = 192.10 ZA = 12.42 to apparent RA = 01:24:34.6 Dec = +30:28:22.8 2010-Jan-07 18:29:06 LOG2 antvel: Parameters to Doppler: Heliocentric 81006 2010 7 0.0 2010-Jan-07 18:29:06 INFO5 antvel: Computed antenna velocity: +27.62596 km/s 2010-Jan-07 18:29:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.6259606809 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-Jan-07 18:29:06 INFO4 dopset_gen: New sky frequencies: 1381.116158 1381.116158 1381.116158 1381.116158 1381.116158 1381.116158 1381.116158 1381.116158 1381.116158 2010-Jan-07 18:29:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.116158 sky0=1381.116158 sky1=1381.116158 sky2=1381.116158 sky3=1381.116158 sky4=1381.116158 sky5=1381.116158 sky6=1381.116158 sky7=1381.116158 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:29:06 LOG2 dopset_gen: Result from 'sky2syn': 1631.116158 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:29:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631116158.0} 2010-Jan-07 18:29:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:29:06 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2010-Jan-07 18:29:06 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2010-Jan-07 18:29:06 INFO5 fixed_driftmap: Tracking J2000 position: RA = 01:23:03.5 Dec = +30:25:15.1 2010-Jan-07 18:29:06 LOG3 track_source: Calling 'track_source AGES33PP_p1_091 012303.5 302515.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-Jan-07 18:29:06 START begin_task: Starting task 'sending tracking commands' 2010-Jan-07 18:29:06 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-Jan-07 18:29:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p1_091} INFO {Slewing to source 'AGES33PP_p1_091' ...} 2010-Jan-07 18:29:06 INFO1 track_source: Starting to track AGES33PP_p1_091 2010-Jan-07 18:29:06 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p1_091" 2010-Jan-07 18:29:06 LOG3 vw_send: To DATATAKING: set ra 012303.5 2010-Jan-07 18:29:06 LOG3 vw_send: To DATATAKING: set dec 302515.1 2010-Jan-07 18:29:06 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-07 18:29:06 LOG3 vw_send: To DATATAKING: pnt tr 012303.5 302515.1 -CJ 2010-Jan-07 18:29:06 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 18:29:06 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-07 18:29:06 LOG5 finish_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-Jan-07 18:29:06 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-07 18:29:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 18:29:06 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-07 18:29:06 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-Jan-07 18:29:06 START begin_task: Starting task 'waiting on telescope' 2010-Jan-07 18:29:06 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2010-Jan-07 18:29:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Jan-07 18:29:06 LOG3 waittrk: Start waittrk 5 2010-Jan-07 18:29:06 START begin_task: Starting task 'waiting on telescope movement' 2010-Jan-07 18:29:06 LOG5 begin_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2010-Jan-07 18:29:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631116158.0} 2010-Jan-07 18:29:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:29:06 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p1_091" 2010-Jan-07 18:29:06 LOG4 got_cormsg: From DATATAKING: set ra 012303.5 2010-Jan-07 18:29:06 LOG4 got_cormsg: From DATATAKING: set dec 302515.1 2010-Jan-07 18:29:06 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Jan-07 18:29:06 LOG4 got_cormsg: From DATATAKING: vw% 012303.5 2010-Jan-07 18:29:06 LOG4 got_cormsg: From DATATAKING: vw% 302515.1 2010-Jan-07 18:29:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:29:06 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-07 18:29:06 LOG4 got_cormsg: From DATATAKING: pnt tr 012303.5 302515.1 -CJ 2010-Jan-07 18:29:06 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 18:29:06 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Jan-07 18:29:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:29:11 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Jan-07 18:29:11 LOG5 end_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2010-Jan-07 18:29:11 START begin_task: Starting task 'waiting on telescope on source' 2010-Jan-07 18:29:11 LOG5 begin_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2010-Jan-07 18:29:13 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Jan-07 18:29:13 LOG5 end_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2010-Jan-07 18:29:13 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-07 18:29:13 INFO2 waittrk: Now tracking AGES33PP_p1_091 2010-Jan-07 18:29:13 LOG4 waittrk: Current telescope position: Az = 191.71 ZA = 12.45 2010-Jan-07 18:29:13 STOP finish_task: Finishing task 'waiting on telescope' 2010-Jan-07 18:29:13 LOG5 finish_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2010-Jan-07 18:29:13 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Jan-07 18:29:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 18:29:13 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Jan-07 18:29:13 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2010-Jan-07 18:29:13 START begin_task: Starting task 'adjusting WAPP+Mock power' 2010-Jan-07 18:29:13 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2010-Jan-07 18:29:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2010-Jan-07 18:29:13 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2010-Jan-07 18:29:13 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Jan-07 18:29:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Jan-07 18:29:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:29:13 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Jan-07 18:29:13 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2010-Jan-07 18:29:14 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Jan-07 18:29:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:29:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:29:17 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 18:29:17 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Jan-07 18:29:17 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2010-Jan-07 18:29:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Jan-07 18:29:17 START begin_task: Starting task 'adjusting WAPP power' 2010-Jan-07 18:29:17 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2010-Jan-07 18:29:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Jan-07 18:29:17 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 18:29:17 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 18:29:17 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 18:29:17 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 18:29:17 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Jan-07 18:29:17 LOG5 begin_task: Level: (5) ID = <10126> Status = 0 0 0 0 ok 2010-Jan-07 18:29:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Jan-07 18:29:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:29:17 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 7 dB --- beam 1: 7 7 dB 2010-Jan-07 18:29:17 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 5 dB 2010-Jan-07 18:29:17 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 2 3 dB --- beam 3: 4 4 dB 2010-Jan-07 18:29:17 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 4 1 dB --- beam 7: 4 2 dB 2010-Jan-07 18:29:17 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Jan-07 18:29:17 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Jan-07 18:29:17 LOG5 end_task: Level: (5) ID = <10126> Status = 0 0 0 0 ok 2010-Jan-07 18:29:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.074 0.922 ALFA beam 1: 0.992 0.998 2010-Jan-07 18:29:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.017 1.089 ALFA beam 3: 1.100 0.933 2010-Jan-07 18:29:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.116 0.902 ALFA beam 5: 1.097 1.039 2010-Jan-07 18:29:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.872 0.922 ALFA beam 7: 0.984 0.893 2010-Jan-07 18:29:17 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Jan-07 18:29:17 LOG5 finish_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2010-Jan-07 18:29:17 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Jan-07 18:29:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 18:29:17 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Jan-07 18:29:17 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2010-Jan-07 18:29:17 START begin_task: Starting task 'adjusting Mock spectrometer power' 2010-Jan-07 18:29:17 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2010-Jan-07 18:29:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Jan-07 18:29:17 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2010-Jan-07 18:29:17 LOG3 socket_wait: To MOCK: ADJP30 2010-Jan-07 18:29:17 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2010-Jan-07 18:29:17 LOG5 begin_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2010-Jan-07 18:29:23 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.4 27.8 B 28.3 28.3 mn:A 1.1 0.6 B 0.2 -0.4 gn: 9 9 2010-Jan-07 18:29:23 INFO3 from_mock: From MOCK: b0s1g0 rms:A 32.8 31.4 B 30.1 31.8 mn:A 0.2 -0.3 B -0.2 -0.3 gn: 10 10 2010-Jan-07 18:29:23 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.4 28.6 B 31.6 28.5 mn:A -0.5 0.3 B -0.0 1.1 gn: 8 9 2010-Jan-07 18:29:23 INFO3 from_mock: From MOCK: b1s1g0 rms:A 32.4 29.8 B 28.8 28.8 mn:A -0.3 -0.0 B -1.0 -0.4 gn: 9 8 2010-Jan-07 18:29:23 INFO3 from_mock: From MOCK: b2s0g0 rms:A 30.1 29.2 B 30.5 31.7 mn:A -0.1 -0.2 B -0.3 -0.2 gn: 13 12 2010-Jan-07 18:29:23 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.1 29.5 B 31.5 29.3 mn:A 0.2 -0.4 B 0.1 0.1 gn: 14 12 2010-Jan-07 18:29:23 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.2 29.2 B 31.5 28.1 mn:A 0.4 -0.3 B 0.2 -0.5 gn: 10 11 2010-Jan-07 18:29:23 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.8 30.0 B 30.3 31.5 mn:A -0.1 -0.4 B -0.6 0.0 gn: 10 11 2010-Jan-07 18:29:23 INFO3 from_mock: From MOCK: b4s0g0 rms:A 28.9 28.0 B 30.0 30.2 mn:A 0.3 -0.6 B -0.1 0.3 gn: 9 13 2010-Jan-07 18:29:23 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.5 28.5 B 32.3 30.8 mn:A -0.3 -0.5 B 0.5 -0.2 gn: 11 17 2010-Jan-07 18:29:23 INFO3 from_mock: From MOCK: b5s0g0 rms:A 30.8 30.4 B 28.4 28.2 mn:A 0.0 -0.1 B -0.2 -0.4 gn: 10 9 2010-Jan-07 18:29:23 INFO3 from_mock: From MOCK: b5s1g0 rms:A 31.8 31.1 B 30.0 30.1 mn:A 0.1 -0.1 B 0.4 0.9 gn: 10 9 2010-Jan-07 18:29:23 INFO3 from_mock: From MOCK: b6s0g0 rms:A 29.8 27.2 B 29.9 30.2 mn:A -0.5 -0.1 B -0.5 0.5 gn: 11 15 2010-Jan-07 18:29:23 INFO3 from_mock: From MOCK: b6s1g0 rms:A 29.6 27.0 B 30.2 29.6 mn:A -0.3 0.2 B 0.1 -0.4 gn: 12 16 2010-Jan-07 18:29:23 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2010-Jan-07 18:29:23 LOG5 end_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2010-Jan-07 18:29:23 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2010-Jan-07 18:29:23 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2010-Jan-07 18:29:23 LOG5 finish_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2010-Jan-07 18:29:23 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2010-Jan-07 18:29:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 18:29:23 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2010-Jan-07 18:29:23 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2010-Jan-07 18:29:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-07 18:29:23 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2010-Jan-07 18:29:23 LOG5 finish_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2010-Jan-07 18:29:23 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2010-Jan-07 18:29:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 18:29:23 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2010-Jan-07 18:29:23 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2010-Jan-07 18:29:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2010-Jan-07 18:29:23 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2010-Jan-07 18:29:23 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2010-Jan-07 18:29:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2010-Jan-07 18:29:23 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2010-Jan-07 18:29:23 START begin_task: Starting task 'WAPP+Mock calibration' 2010-Jan-07 18:29:23 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Jan-07 18:29:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2010-Jan-07 18:29:23 START begin_task: Starting task 'selecting calibration type' 2010-Jan-07 18:29:23 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2010-Jan-07 18:29:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-07 18:29:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-07 18:29:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:29:23 START begin_task: Starting task 'waiting on setcal' 2010-Jan-07 18:29:23 LOG5 begin_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2010-Jan-07 18:29:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2010-Jan-07 18:29:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-07 18:29:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:29:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:29:24 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 18:29:24 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-07 18:29:24 LOG5 end_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2010-Jan-07 18:29:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-07 18:29:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 18:29:24 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-07 18:29:24 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 18:29:24 LOG5 begin_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2010-Jan-07 18:29:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:29:24 NOTE WAPPDATA-new_file: New FITS file: wapp.20100107.a2048.0001.fits 2010-Jan-07 18:29:24 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100107.a2048.0001.fits} 2010-Jan-07 18:29:24 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 18:29:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 18:29:24 LOG5 end_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2010-Jan-07 18:29:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 18:29:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-07 18:29:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 18:29:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-07 18:29:25 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 18:29:25 LOG5 begin_task: Level: (5) ID = <10133> Status = 0 0 0 0 ok 2010-Jan-07 18:29:25 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 18:29:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 18:29:25 LOG5 end_task: Level: (5) ID = <10133> Status = 0 0 0 0 ok 2010-Jan-07 18:29:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 18:29:25 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-07 18:29:25 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-07 18:29:25 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2010-Jan-07 18:29:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-07 18:29:25 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-07 18:29:25 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-07 18:29:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-07 18:29:25 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2010-Jan-07 18:29:25 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-07 18:29:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-07 18:29:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-07 18:29:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-07 18:29:25 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2010-Jan-07 18:29:25 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-07 18:29:25 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-Jan-07 18:29:25 LOG5 begin_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2010-Jan-07 18:29:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-07 18:29:25 LOG5 log_alfabeam: Parameters: 1.3843055555555555 30.420861111111105 1.198174 2010.0212742413871 7.599952 2010-Jan-07 18:29:25 LOG4 log_alfabeam: ALFABEAM 0 1.384305555555544 30.420861111111101 2010-Jan-07 18:29:25 LOG4 log_alfabeam: ALFABEAM 1 1.385187046043452 30.316940777254352 2010-Jan-07 18:29:25 LOG4 log_alfabeam: ALFABEAM 2 1.390867857366363 30.386350762311555 2010-Jan-07 18:29:25 LOG4 log_alfabeam: ALFABEAM 3 1.390009798988328 30.490382957912423 2010-Jan-07 18:29:25 LOG4 log_alfabeam: ALFABEAM 4 1.383379412542235 30.524809204690332 2010-Jan-07 18:29:25 LOG4 log_alfabeam: ALFABEAM 5 1.377712016739357 30.454708592486515 2010-Jan-07 18:29:25 LOG4 log_alfabeam: ALFABEAM 6 1.378661444414670 30.350875005966810 2010-Jan-07 18:29:25 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-Jan-07 18:29:25 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-Jan-07 18:29:25 LOG3 take_mock_data: PSET configuration: obsnm=ss 2010-Jan-07 18:29:25 LOG3 take_mock_data: PSET configuration: object=AGES33PP_p1_091 2010-Jan-07 18:29:25 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-Jan-07 18:29:25 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-Jan-07 18:29:25 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-Jan-07 18:29:25 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-Jan-07 18:29:25 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-Jan-07 18:29:25 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-Jan-07 18:29:25 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2010-Jan-07 18:29:25 LOG3 take_mock_data: PSET configuration: scantype=ON 2010-Jan-07 18:29:25 LOG3 take_mock_data: PSET configuration: patternid=229506 2010-Jan-07 18:29:25 LOG3 take_mock_data: PSET configuration: scanid=229520 2010-Jan-07 18:29:25 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-Jan-07 18:29:25 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-Jan-07 18:29:25 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-Jan-07 18:29:25 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456116158.0 2010-Jan-07 18:29:25 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306116158.0 2010-Jan-07 18:29:25 LOG3 take_mock_data: PSET configuration: filetype=1 2010-Jan-07 18:29:25 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-Jan-07 18:29:25 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ss:object=AGES33PP_p1_091:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=229506:scanid=229520:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456116158.0:topobfreqhz=1306116158.0:filetype=1 2010-Jan-07 18:29:25 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-Jan-07 18:29:25 LOG5 begin_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2010-Jan-07 18:29:25 LOG4 from_mock: From MOCK: psetok 2010-Jan-07 18:29:25 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-Jan-07 18:29:25 LOG5 end_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2010-Jan-07 18:29:25 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-Jan-07 18:29:25 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-Jan-07 18:29:25 LOG3 socket_wait: To MOCK: STAR5 2010-Jan-07 18:29:25 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-Jan-07 18:29:25 LOG5 begin_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2010-Jan-07 18:29:25 LOG4 from_mock: From MOCK: starok 2010-Jan-07 18:29:25 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-Jan-07 18:29:25 LOG5 end_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2010-Jan-07 18:29:25 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-Jan-07 18:29:25 INFO2 take_data: Starting WAPP+Mock 5-second scan: 229520 2010-Jan-07 18:29:25 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-Jan-07 18:29:25 LOG5 begin_task: Level: (5) ID = <10138> Status = 0 0 0 0 ok 2010-Jan-07 18:29:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:29:25 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-Jan-07 18:29:25 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-Jan-07 18:29:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-07 18:29:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80966.00 2010-Jan-07 18:29:27 INFO2 got_mock_message: Mock spectrometer start file number is 00000 2010-Jan-07 18:29:27 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-Jan-07 18:29:27 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2010-Jan-07 18:29:27 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2010-Jan-07 18:29:27 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-Jan-07 18:29:27 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-Jan-07 18:29:27 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-Jan-07 18:29:27 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-Jan-07 18:29:27 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-Jan-07 18:29:27 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-Jan-07 18:29:27 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-Jan-07 18:29:27 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-Jan-07 18:29:27 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-Jan-07 18:29:27 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2010-Jan-07 18:29:27 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2010-Jan-07 18:29:27 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2010-Jan-07 18:29:27 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2010-Jan-07 18:29:27 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2010-Jan-07 18:29:27 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2010-Jan-07 18:29:27 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2010-Jan-07 18:29:30 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 18:29:30.00 2010-Jan-07 18:29:30 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1262903370.00 Thu Jan 7 18:29:30 2010 2010-Jan-07 18:29:30 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-Jan-07 18:29:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.116158 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:29:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.116158 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:29:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.116158 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:29:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.116158 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:29:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.116158 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:29:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.116158 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:29:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.116158 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:29:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.116158 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:29:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.116158 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:29:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:29:35 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-Jan-07 18:29:36 INFO1 got_mock_message: From MOCK: DONE with observation 2010-Jan-07 18:29:36 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-Jan-07 18:29:36 LOG5 end_task: Level: (5) ID = <10138> Status = 0 0 0 0 ok 2010-Jan-07 18:29:36 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-Jan-07 18:29:36 LOG5 end_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2010-Jan-07 18:29:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-07 18:29:36 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-07 18:29:36 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-07 18:29:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-07 18:29:36 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2010-Jan-07 18:29:36 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-07 18:29:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-07 18:29:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-07 18:29:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-07 18:29:36 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2010-Jan-07 18:29:36 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2010-Jan-07 18:29:36 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-Jan-07 18:29:36 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2010-Jan-07 18:29:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2010-Jan-07 18:29:36 LOG5 log_alfabeam: Parameters: 1.3843055555555555 30.420861111111105 1.201238 2010.0212745899562 7.599952 2010-Jan-07 18:29:36 LOG4 log_alfabeam: ALFABEAM 0 1.384305555555539 30.420861111111101 2010-Jan-07 18:29:36 LOG4 log_alfabeam: ALFABEAM 1 1.385214875592244 30.316980980583683 2010-Jan-07 18:29:36 LOG4 log_alfabeam: ALFABEAM 2 1.390877073183020 30.386645316069750 2010-Jan-07 18:29:36 LOG4 log_alfabeam: ALFABEAM 3 1.389991126463590 30.490638434719269 2010-Jan-07 18:29:36 LOG4 log_alfabeam: ALFABEAM 4 1.383351485230594 30.524767015684326 2010-Jan-07 18:29:36 LOG4 log_alfabeam: ALFABEAM 5 1.377702972940506 30.454412204793989 2010-Jan-07 18:29:36 LOG4 log_alfabeam: ALFABEAM 6 1.378680267578792 30.350621930161907 2010-Jan-07 18:29:36 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-Jan-07 18:29:36 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-Jan-07 18:29:36 LOG3 take_mock_data: PSET configuration: obsnm=ss 2010-Jan-07 18:29:36 LOG3 take_mock_data: PSET configuration: object=AGES33PP_p1_091 2010-Jan-07 18:29:36 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-Jan-07 18:29:36 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-Jan-07 18:29:36 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-Jan-07 18:29:36 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-Jan-07 18:29:36 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-Jan-07 18:29:36 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-Jan-07 18:29:36 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2010-Jan-07 18:29:36 LOG3 take_mock_data: PSET configuration: scantype=OFF 2010-Jan-07 18:29:36 LOG3 take_mock_data: PSET configuration: patternid=229506 2010-Jan-07 18:29:36 LOG3 take_mock_data: PSET configuration: scanid=229521 2010-Jan-07 18:29:36 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-Jan-07 18:29:36 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-Jan-07 18:29:36 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-Jan-07 18:29:36 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456116158.0 2010-Jan-07 18:29:36 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306116158.0 2010-Jan-07 18:29:36 LOG3 take_mock_data: PSET configuration: filetype=1 2010-Jan-07 18:29:36 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-Jan-07 18:29:36 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ss:object=AGES33PP_p1_091:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=229506:scanid=229521:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456116158.0:topobfreqhz=1306116158.0:filetype=1 2010-Jan-07 18:29:36 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-Jan-07 18:29:36 LOG5 begin_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2010-Jan-07 18:29:36 LOG4 from_mock: From MOCK: psetok 2010-Jan-07 18:29:36 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-Jan-07 18:29:36 LOG5 end_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2010-Jan-07 18:29:36 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-Jan-07 18:29:36 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-Jan-07 18:29:36 LOG3 socket_wait: To MOCK: STAR5 2010-Jan-07 18:29:36 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-Jan-07 18:29:36 LOG5 begin_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2010-Jan-07 18:29:36 LOG4 from_mock: From MOCK: starok 2010-Jan-07 18:29:36 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-Jan-07 18:29:36 LOG5 end_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2010-Jan-07 18:29:36 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-Jan-07 18:29:36 INFO2 take_data: Starting WAPP+Mock 5-second scan: 229521 2010-Jan-07 18:29:36 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-Jan-07 18:29:36 LOG5 begin_task: Level: (5) ID = <10143> Status = 0 0 0 0 ok 2010-Jan-07 18:29:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:29:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2010-Jan-07 18:29:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80977.00 2010-Jan-07 18:29:37 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-Jan-07 18:29:37 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-Jan-07 18:29:39 INFO2 got_mock_message: Mock spectrometer start file number is 00100 2010-Jan-07 18:29:39 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-Jan-07 18:29:39 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2010-Jan-07 18:29:39 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2010-Jan-07 18:29:39 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-Jan-07 18:29:39 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-Jan-07 18:29:39 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-Jan-07 18:29:39 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-Jan-07 18:29:39 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-Jan-07 18:29:39 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-Jan-07 18:29:39 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-Jan-07 18:29:39 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-Jan-07 18:29:39 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-Jan-07 18:29:39 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2010-Jan-07 18:29:39 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2010-Jan-07 18:29:39 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2010-Jan-07 18:29:39 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2010-Jan-07 18:29:39 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2010-Jan-07 18:29:39 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2010-Jan-07 18:29:39 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2010-Jan-07 18:29:42 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 18:29:42.01 2010-Jan-07 18:29:42 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1262903382.01 Thu Jan 7 18:29:42 2010 2010-Jan-07 18:29:42 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-Jan-07 18:29:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.116158 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:29:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.116158 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:29:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.116158 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:29:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.116158 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:29:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.116158 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:29:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.116158 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:29:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.116158 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:29:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.116158 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:29:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.116158 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:29:42 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2010-Jan-07 18:29:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:29:47 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-Jan-07 18:29:48 INFO1 got_mock_message: From MOCK: DONE with observation 2010-Jan-07 18:29:48 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-Jan-07 18:29:48 LOG5 end_task: Level: (5) ID = <10143> Status = 0 0 0 0 ok 2010-Jan-07 18:29:48 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-Jan-07 18:29:48 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2010-Jan-07 18:29:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-07 18:29:48 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2010-Jan-07 18:29:48 LOG5 finish_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Jan-07 18:29:48 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2010-Jan-07 18:29:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 18:29:48 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2010-Jan-07 18:29:48 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Jan-07 18:29:48 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2010-Jan-07 18:29:48 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 192.10 and ZA = 12.42 2010-Jan-07 18:29:48 LOG3 track_source: Calling 'track_source AGES33PP_p1_091 192.10 12.4211998179 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-Jan-07 18:29:48 START begin_task: Starting task 'sending tracking commands' 2010-Jan-07 18:29:48 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-Jan-07 18:29:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p1_091} INFO {Slewing to source 'AGES33PP_p1_091' ...} 2010-Jan-07 18:29:48 INFO1 track_source: Starting to track AGES33PP_p1_091 2010-Jan-07 18:29:48 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p1_091" 2010-Jan-07 18:29:48 LOG3 vw_send: To DATATAKING: set ra 192.10 2010-Jan-07 18:29:48 LOG3 vw_send: To DATATAKING: set dec 12.4211998179 2010-Jan-07 18:29:48 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-07 18:29:48 LOG3 vw_send: To DATATAKING: pnt tr 192.10 12.4211998179 -CF 2010-Jan-07 18:29:48 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 18:29:48 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-07 18:29:48 LOG5 finish_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-Jan-07 18:29:48 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-07 18:29:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 18:29:48 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-07 18:29:48 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-Jan-07 18:29:48 LOG1 fixed_driftmap: Parameters: HA = -00:11:59.7 Start = 01:12:35.1 LST = 01:12:16.5 diff = 18.6 secs 2010-Jan-07 18:29:48 INFO2 fixed_driftmap: Waiting 16.6 seconds for RA 1:24:35 2010-Jan-07 18:29:48 INFO2 lstwait: Waiting for 16.5 secs from LST 01:12:16 to LST 01:12:33 ... 2010-Jan-07 18:29:48 LOG4 send_obs_status: To obs_status: <1> TASKTIME 16.52354941895161 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Jan-07 18:29:48 START begin_task: Starting task 'waiting on wait on LST' 2010-Jan-07 18:29:48 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2010-Jan-07 18:29:48 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p1_091" 2010-Jan-07 18:29:48 LOG4 got_cormsg: From DATATAKING: set ra 192.10 2010-Jan-07 18:29:48 LOG4 got_cormsg: From DATATAKING: set dec 12.4211998179 2010-Jan-07 18:29:48 LOG4 got_cormsg: From DATATAKING: vw% 192.10 2010-Jan-07 18:29:48 LOG4 got_cormsg: From DATATAKING: vw% 12.4211998179 2010-Jan-07 18:29:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:29:48 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-07 18:29:48 LOG4 got_cormsg: From DATATAKING: pnt tr 192.10 12.4211998179 -CF 2010-Jan-07 18:29:48 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 18:29:48 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Jan-07 18:29:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:30:05 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-Jan-07 18:30:05 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2010-Jan-07 18:30:05 LOG4 lstwait: Finished waiting 0.48 seconds late 2010-Jan-07 18:30:05 INFO3 lstwait: Finished waiting 2010-Jan-07 18:30:05 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Jan-07 18:30:05 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2010-Jan-07 18:30:05 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-Jan-07 18:30:05 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2010-Jan-07 18:30:05 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Jan-07 18:30:05 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-Jan-07 18:30:05 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2010-Jan-07 18:30:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Jan-07 18:30:05 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Jan-07 18:30:05 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-Jan-07 18:30:05 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-Jan-07 18:30:05 LOG3 take_mock_data: PSET configuration: obsnm=ss 2010-Jan-07 18:30:05 LOG3 take_mock_data: PSET configuration: object=AGES33PP_p1_091 2010-Jan-07 18:30:05 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-Jan-07 18:30:05 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-Jan-07 18:30:05 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-Jan-07 18:30:05 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-Jan-07 18:30:05 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-Jan-07 18:30:05 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-Jan-07 18:30:05 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2010-Jan-07 18:30:05 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2010-Jan-07 18:30:05 LOG3 take_mock_data: PSET configuration: patternid=229522 2010-Jan-07 18:30:05 LOG3 take_mock_data: PSET configuration: scanid=229522 2010-Jan-07 18:30:05 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-Jan-07 18:30:05 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-Jan-07 18:30:05 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-Jan-07 18:30:05 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456116158.0 2010-Jan-07 18:30:05 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306116158.0 2010-Jan-07 18:30:05 LOG3 take_mock_data: PSET configuration: filetype=1 2010-Jan-07 18:30:05 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-Jan-07 18:30:05 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ss:object=AGES33PP_p1_091:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=229522:scanid=229522:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456116158.0:topobfreqhz=1306116158.0:filetype=1 2010-Jan-07 18:30:05 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-Jan-07 18:30:05 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2010-Jan-07 18:30:05 LOG4 from_mock: From MOCK: psetok 2010-Jan-07 18:30:05 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-Jan-07 18:30:05 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2010-Jan-07 18:30:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-Jan-07 18:30:05 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-Jan-07 18:30:05 LOG3 socket_wait: To MOCK: STAR1200 2010-Jan-07 18:30:05 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-Jan-07 18:30:05 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2010-Jan-07 18:30:05 LOG4 from_mock: From MOCK: starok 2010-Jan-07 18:30:05 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-Jan-07 18:30:05 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2010-Jan-07 18:30:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-Jan-07 18:30:05 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 229522 2010-Jan-07 18:30:05 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-Jan-07 18:30:05 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2010-Jan-07 18:30:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-07 18:30:05 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-Jan-07 18:30:05 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-Jan-07 18:30:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Jan-07 18:30:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81006.00 2010-Jan-07 18:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.116158 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-07 18:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.116158 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Jan-07 18:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.116158 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Jan-07 18:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.116158 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Jan-07 18:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.116158 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Jan-07 18:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.116158 MHz Flip = 1 Band = 0 Mixer = 909.781919 MHz 2010-Jan-07 18:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.116158 MHz Flip = 1 Band = 0 Mixer = 928.115475 MHz 2010-Jan-07 18:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.116158 MHz Flip = 1 Band = 0 Mixer = 1707.657139 MHz 2010-Jan-07 18:30:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.116158 MHz Flip = 1 Band = 0 Mixer = 2105.041009 MHz 2010-Jan-07 18:30:07 INFO2 got_mock_message: Mock spectrometer start file number is 00200 2010-Jan-07 18:30:07 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-Jan-07 18:30:07 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2010-Jan-07 18:30:07 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2010-Jan-07 18:30:07 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-Jan-07 18:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-Jan-07 18:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-Jan-07 18:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-Jan-07 18:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-Jan-07 18:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-Jan-07 18:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-Jan-07 18:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-Jan-07 18:30:07 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-Jan-07 18:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.16 GB 2010-Jan-07 18:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.16 GB 2010-Jan-07 18:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.16 GB 2010-Jan-07 18:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.16 GB 2010-Jan-07 18:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.16 GB 2010-Jan-07 18:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.16 GB 2010-Jan-07 18:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.16 GB 2010-Jan-07 18:30:10 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 18:30:10.01 2010-Jan-07 18:30:10 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1262903410.01 Thu Jan 7 18:30:10 2010 2010-Jan-07 18:30:10 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-Jan-07 18:38:04 WARNING WAPPDATA-wappdata: WARNING wappdata buildup logic error! 2010-Jan-07 18:38:04 WARNING WAPPDATA-clear_all_pending: WARNING WAPPDATA confused --- cleared 1 dumps! 2010-Jan-07 18:38:04 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 76 dumps! 2010-Jan-07 18:38:10 WARNING WAPPDATA-wappdata: WARNING wappdata buildup logic error! 2010-Jan-07 18:38:10 WARNING WAPPDATA-clear_all_pending: WARNING WAPPDATA confused --- cleared 3 dumps! 2010-Jan-07 18:38:10 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 75 dumps! 2010-Jan-07 18:38:16 WARNING WAPPDATA-wappdata: WARNING wappdata buildup logic error! 2010-Jan-07 18:38:16 WARNING WAPPDATA-clear_all_pending: WARNING WAPPDATA confused --- cleared 5 dumps! 2010-Jan-07 18:38:16 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 74 dumps! 2010-Jan-07 18:38:23 WARNING WAPPDATA-wappdata: WARNING wappdata buildup logic error! 2010-Jan-07 18:38:23 WARNING WAPPDATA-clear_all_pending: WARNING WAPPDATA confused --- cleared 5 dumps! 2010-Jan-07 18:38:23 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 74 dumps! 2010-Jan-07 18:38:29 WARNING WAPPDATA-wappdata: WARNING wappdata buildup logic error! 2010-Jan-07 18:38:29 WARNING WAPPDATA-clear_all_pending: WARNING WAPPDATA confused --- cleared 3 dumps! 2010-Jan-07 18:38:29 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 75 dumps! 2010-Jan-07 18:38:35 WARNING WAPPDATA-wappdata: WARNING wappdata buildup logic error! 2010-Jan-07 18:38:35 WARNING WAPPDATA-clear_all_pending: WARNING WAPPDATA confused --- cleared 1 dumps! 2010-Jan-07 18:38:35 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 76 dumps! 2010-Jan-07 18:38:42 WARNING WAPPDATA-wappdata: WARNING wappdata buildup logic error! 2010-Jan-07 18:38:42 WARNING WAPPDATA-clear_all_pending: WARNING WAPPDATA confused --- cleared 1 dumps! 2010-Jan-07 18:38:42 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 76 dumps! 2010-Jan-07 18:38:48 WARNING WAPPDATA-wappdata: WARNING wappdata buildup logic error! 2010-Jan-07 18:38:48 WARNING WAPPDATA-clear_all_pending: WARNING WAPPDATA confused --- cleared 3 dumps! 2010-Jan-07 18:38:48 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 75 dumps! 2010-Jan-07 18:38:54 WARNING WAPPDATA-wappdata: WARNING wappdata buildup logic error! 2010-Jan-07 18:38:54 WARNING WAPPDATA-clear_all_pending: WARNING WAPPDATA confused --- cleared 5 dumps! 2010-Jan-07 18:38:54 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 74 dumps! 2010-Jan-07 18:39:00 WARNING WAPPDATA-wappdata: WARNING wappdata buildup logic error! 2010-Jan-07 18:39:00 WARNING WAPPDATA-clear_all_pending: WARNING WAPPDATA confused --- cleared 5 dumps! 2010-Jan-07 18:39:00 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 74 dumps! 2010-Jan-07 18:39:07 WARNING WAPPDATA-wappdata: WARNING wappdata buildup logic error! 2010-Jan-07 18:39:07 WARNING WAPPDATA-clear_all_pending: WARNING WAPPDATA confused --- cleared 5 dumps! 2010-Jan-07 18:39:07 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 74 dumps! 2010-Jan-07 18:39:13 WARNING WAPPDATA-wappdata: WARNING wappdata buildup logic error! 2010-Jan-07 18:39:13 WARNING WAPPDATA-clear_all_pending: WARNING WAPPDATA confused --- cleared 1 dumps! 2010-Jan-07 18:39:13 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 76 dumps! 2010-Jan-07 18:39:19 WARNING WAPPDATA-wappdata: WARNING wappdata buildup logic error! 2010-Jan-07 18:39:19 WARNING WAPPDATA-clear_all_pending: WARNING WAPPDATA confused --- cleared 1 dumps! 2010-Jan-07 18:39:19 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 76 dumps! 2010-Jan-07 18:39:26 WARNING WAPPDATA-wappdata: WARNING wappdata buildup logic error! 2010-Jan-07 18:39:26 WARNING WAPPDATA-clear_all_pending: WARNING WAPPDATA confused --- cleared 3 dumps! 2010-Jan-07 18:39:26 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 75 dumps! 2010-Jan-07 18:39:32 WARNING WAPPDATA-wappdata: WARNING wappdata buildup logic error! 2010-Jan-07 18:39:32 WARNING WAPPDATA-clear_all_pending: WARNING WAPPDATA confused --- cleared 5 dumps! 2010-Jan-07 18:39:32 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 74 dumps! 2010-Jan-07 18:39:37 LOG5 wapp_failed: Calling 'wapp_failed 4' 2010-Jan-07 18:39:37 ERROR wapp_failed: ERROR WAPP-4 failed to complete its current task! 2010-Jan-07 18:39:37 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 4 abort' 2010-Jan-07 18:39:37 START begin_task: Starting task 'handling WAPP failure' 2010-Jan-07 18:39:37 LOG5 begin_task: Level: (5) ID = <10150> Status = 0 0 0 0 ok 2010-Jan-07 18:39:37 NOTE handle_wapp_failure: Will abort task 'running command file '100107.cmd'' since the WAPP failure preference is set to 'abort'! 2010-Jan-07 18:39:37 ALERT handle_wapp_failure: Aborting due to WAPP failure! 2010-Jan-07 18:39:37 LOG1 task_failed: Task 'handling WAPP failure' failed! 2010-Jan-07 18:39:37 LOG5 task_failed: Level: (5) ID = <10150> Status = 0 0 0 0 ok 2010-Jan-07 18:39:37 WARNING abort_task: WARNING abort requested! 2010-Jan-07 18:39:37 WARNING abort_task: WARNING Aborting handling WAPP failure 2010-Jan-07 18:39:37 WARNING abort_task: WARNING Aborting wait for handling WAPP failure 2010-Jan-07 18:39:37 STOP end_task: Finishing task 'handling WAPP failure' with status 'FAILED' 2010-Jan-07 18:39:37 LOG5 end_task: Level: (5) ID = <10150> Status = 1 0 0 1 failed 2010-Jan-07 18:39:37 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'FAILED' 2010-Jan-07 18:39:37 LOG5 end_task: Level: (4) ID = <10149> Status = 1 0 0 1 failed 2010-Jan-07 18:39:37 LOG4 stop_backends: Calling 'stop_backends' 2010-Jan-07 18:39:37 START begin_task: Starting task 'stopping the WAPPs' 2010-Jan-07 18:39:37 LOG5 begin_task: Level: (4) ID = <10151> Status = 1 0 0 1 failed 2010-Jan-07 18:39:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2010-Jan-07 18:39:37 INFO1 stop_wapp: Stopping the WAPPs 2010-Jan-07 18:39:37 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2010-Jan-07 18:39:37 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2010-Jan-07 18:39:37 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2010-Jan-07 18:39:37 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2010-Jan-07 18:39:37 START begin_task: Starting task 'waiting on stopping WAPPs' 2010-Jan-07 18:39:37 LOG5 begin_task: Level: (5) ID = <10152> Status = 1 0 0 1 failed 2010-Jan-07 18:39:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2010-Jan-07 18:39:37 ERROR WAPP=4-start_spectra: ERROR failed to read spectral line data! 2010-Jan-07 18:39:37 PROBLEM WAPP=4-start_spectra: Reason: Connection timed out! 2010-Jan-07 18:39:37 INFO1 WAPP=4-start_spectra: DONE with spectral line observation 2010-Jan-07 18:39:38 WARNING WAPPDATA-wappdata: WARNING wappdata buildup logic error! 2010-Jan-07 18:39:38 WARNING WAPPDATA-clear_all_pending: WARNING WAPPDATA confused --- cleared 5 dumps! 2010-Jan-07 18:39:38 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 74 dumps! 2010-Jan-07 18:39:38 INFO1 WAPP=4-wappcon: Can't abort --- the WAPP isn't running 2010-Jan-07 18:39:39 NOTE WAPP=1+2+3-wappcon: WAPP successfully aborted! 2010-Jan-07 18:39:39 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'FAILED' 2010-Jan-07 18:39:39 LOG5 end_task: Level: (5) ID = <10152> Status = 1 0 0 1 failed 2010-Jan-07 18:39:39 STOP end_task: Finishing task 'stopping the WAPPs' with status 'FAILED' 2010-Jan-07 18:39:39 LOG5 end_task: Level: (4) ID = <10151> Status = 1 0 0 1 failed 2010-Jan-07 18:39:39 START begin_task: Starting task 'stopping the Mock spectrometer' 2010-Jan-07 18:39:39 LOG5 begin_task: Level: (4) ID = <10153> Status = 1 0 0 1 failed 2010-Jan-07 18:39:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping Mock ...} 2010-Jan-07 18:39:39 INFO1 stop_mock: Stopping the Mock spectrometer 2010-Jan-07 18:39:39 LOG2 socket_wait: Starting sockwait on MOCK for 'stop the Mock spectrometer' using string 'stop' 2010-Jan-07 18:39:39 LOG3 socket_wait: To MOCK: STOP 2010-Jan-07 18:39:39 START begin_task: Starting task 'waiting on stop the Mock spectrometer' 2010-Jan-07 18:39:39 LOG5 begin_task: Level: (5) ID = <10154> Status = 1 0 0 1 failed 2010-Jan-07 18:39:39 LOG4 WAPP=1+2+3-start_spectra: Abort request received 2010-Jan-07 18:39:39 INFO1 WAPP=1+2+3-start_spectra: DONE with spectral line observation 2010-Jan-07 18:39:40 LOG1 from_mock: From MOCK: stopok 2010-Jan-07 18:39:40 INFO1 got_mock_message: From MOCK: DONE with observation (aborted) 2010-Jan-07 18:39:40 INFO2 got_mock_message: Observation was 47.2% complete when aborted 2010-Jan-07 18:39:40 STOP end_task: Finishing task 'waiting on stop the Mock spectrometer' with status 'FAILED' 2010-Jan-07 18:39:40 LOG5 end_task: Level: (5) ID = <10154> Status = 1 0 0 1 failed 2010-Jan-07 18:39:40 LOG3 socket_wait: DONE with sockwait on MOCK for 'stop the Mock spectrometer' 2010-Jan-07 18:39:40 STOP end_task: Finishing task 'stopping the Mock spectrometer' with status 'FAILED' 2010-Jan-07 18:39:40 LOG5 end_task: Level: (4) ID = <10153> Status = 1 0 0 1 failed 2010-Jan-07 18:39:40 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'FAILED' 2010-Jan-07 18:39:40 LOG5 end_task: Level: (3) ID = <10146> Status = 1 0 0 1 failed 2010-Jan-07 18:39:40 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-Jan-07 18:39:40 LOG5 finish_task: Level: (2) ID = <10107> Status = 1 0 0 1 failed 2010-Jan-07 18:39:40 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2010-Jan-07 18:39:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Jan-07 18:39:40 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2010-Jan-07 18:39:40 LOG5 end_task: Level: (2) ID = <10107> Status = 1 0 0 1 failed 2010-Jan-07 18:39:40 ALERT run_command_file: Stopping command file processing at line 33! 2010-Jan-07 18:39:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Jan-07 18:39:40 STOP finish_task: Finishing task 'running command file '100107.cmd'' 2010-Jan-07 18:39:40 LOG5 finish_task: Level: (1) ID = <10003> Status = 1 0 0 1 failed 2010-Jan-07 18:39:40 ERROR finish_task: ERROR failed running: command file '100107.cmd' 2010-Jan-07 18:39:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Jan-07 18:39:40 END end_task: Finishing task 'running command file '100107.cmd'' with status 'FAILED' 2010-Jan-07 18:39:40 LOG5 end_task: Level: (1) ID = <10003> Status = 1 0 0 1 failed 2010-Jan-07 18:39:40 WARNING WAPPDATA-clear_all_pending: WARNING WAPPDATA confused --- cleared 2 dumps! 2010-Jan-07 18:39:40 WARNING WAPPDATA-flush_pending: WARNING WAPPDATA flushing 4 dumps! 2010-Jan-07 18:40:26 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Jan-07 18:40:26 LOG4 exec_msg: From OBSERVER: run_command_file 100107.cmd 36 1 40 2010-Jan-07 18:40:26 LOG4 run_command_file: Calling 'run_command_file 100107.cmd 36 1 40' 2010-Jan-07 18:40:26 BEGIN begin_task: Starting task 'running command file '100107.cmd'' 2010-Jan-07 18:40:26 LOG5 begin_task: Level: (1) ID = <10155> Status = 0 0 0 0 ok 2010-Jan-07 18:40:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100107.cmd' ...} 2010-Jan-07 18:40:26 NOTE run_command_file: Starting execution of command file '100107.cmd' from line 36 2010-Jan-07 18:40:26 COMMAND run_command_line: EXECUTING command 36: 'ENDIF' 2010-Jan-07 18:40:26 ERROR run_command_line: ERROR found an 'ENDIF' without matching 'IF'! 2010-Jan-07 18:40:26 LOG1 task_failed: Task 'running command file '100107.cmd'' failed! 2010-Jan-07 18:40:26 LOG5 task_failed: Level: (1) ID = <10155> Status = 0 0 0 0 ok 2010-Jan-07 18:40:26 ALERT run_command_file: Stopping command file processing at line 36! 2010-Jan-07 18:40:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Jan-07 18:40:26 STOP finish_task: Finishing task 'running command file '100107.cmd'' 2010-Jan-07 18:40:26 LOG5 finish_task: Level: (1) ID = <10155> Status = 0 0 0 1 failed 2010-Jan-07 18:40:26 ERROR finish_task: ERROR failed running: command file '100107.cmd' 2010-Jan-07 18:40:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Jan-07 18:40:26 END end_task: Finishing task 'running command file '100107.cmd'' with status 'FAILED' 2010-Jan-07 18:40:26 LOG5 end_task: Level: (1) ID = <10155> Status = 0 0 0 1 failed 2010-Jan-07 18:41:00 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Jan-07 18:41:00 LOG4 exec_msg: From OBSERVER: run_command_file 100107.cmd 37 1 40 2010-Jan-07 18:41:00 LOG4 run_command_file: Calling 'run_command_file 100107.cmd 37 1 40' 2010-Jan-07 18:41:00 BEGIN begin_task: Starting task 'running command file '100107.cmd'' 2010-Jan-07 18:41:00 LOG5 begin_task: Level: (1) ID = <10156> Status = 0 0 0 0 ok 2010-Jan-07 18:41:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100107.cmd' ...} 2010-Jan-07 18:41:00 NOTE run_command_file: Starting execution of command file '100107.cmd' from line 37 2010-Jan-07 18:41:00 COMMAND run_command_line: EXECUTING command 39: 'IF LSTSLEW(AGES33PP_p1_093) < 013734 THEN' 2010-Jan-07 18:41:01 LOG3 is_if_valid: Current source data: up 181.1 12.1 UP - - 69 0.4 2010-Jan-07 18:41:01 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES33PP_p1_093) < 013734 2010-Jan-07 18:41:01 INFO5 is_if_valid: Condition parsed as: 1.3987026666666666 < 1.6261111111111111 2010-Jan-07 18:41:01 COMMAND run_command_line: EXECUTING command 40: 'FIXEDDRIFT az=166.87 alfaangle=31.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_093 ra=12400.00 dec=302200.00' 2010-Jan-07 18:41:01 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-Jan-07 18:41:01 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-07 18:41:01 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 166.87 31.6 hcorcal 5 tracking no off lcorcal first 1 AGES33PP_p1_093 12400.00 302200.00 J 8500.0 Heliocentric velocity(optical)' 2010-Jan-07 18:41:01 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-Jan-07 18:41:01 LOG5 begin_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2010-Jan-07 18:41:01 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES33PP_p1_091' 2010-Jan-07 18:41:01 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-Jan-07 18:41:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES33PP_p1_093} 2010-Jan-07 18:41:02 INFO3 fixed_driftmap: Sending telescope to Az = 166.87 and ZA = 12.42 2010-Jan-07 18:41:02 LOG3 track_source: Calling 'track_source AGES33PP_p1_093 166.87 12.4245719420 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-Jan-07 18:41:02 START begin_task: Starting task 'sending tracking commands' 2010-Jan-07 18:41:02 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2010-Jan-07 18:41:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p1_093} INFO {Slewing to source 'AGES33PP_p1_093' ...} 2010-Jan-07 18:41:02 INFO1 track_source: Starting to track AGES33PP_p1_093 2010-Jan-07 18:41:02 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p1_093" 2010-Jan-07 18:41:02 LOG3 vw_send: To DATATAKING: set ra 166.87 2010-Jan-07 18:41:02 LOG3 vw_send: To DATATAKING: set dec 12.4245719420 2010-Jan-07 18:41:02 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-07 18:41:02 LOG3 vw_send: To DATATAKING: pnt tr 166.87 12.4245719420 -CF 2010-Jan-07 18:41:02 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 18:41:02 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-07 18:41:02 LOG5 finish_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2010-Jan-07 18:41:02 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-07 18:41:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 18:41:02 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-07 18:41:02 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2010-Jan-07 18:41:02 START begin_task: Starting task 'rotate ALFA to +31.6 degrees' 2010-Jan-07 18:41:02 LOG5 begin_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2010-Jan-07 18:41:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +31.6 degrees ...} 2010-Jan-07 18:41:02 INFO2 rotate_alfa: ALFA commanded to +31.6 degrees 2010-Jan-07 18:41:02 LOG3 sock_errsend: To ALFAMOTOR: POSITION 31.6 REPLY 2010-Jan-07 18:41:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Jan-07 18:41:02 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Jan-07 18:41:02 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2010-Jan-07 18:41:02 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p1_093" 2010-Jan-07 18:41:02 LOG4 got_cormsg: From DATATAKING: set ra 166.87 2010-Jan-07 18:41:02 LOG4 got_cormsg: From DATATAKING: set dec 12.4245719420 2010-Jan-07 18:41:02 LOG4 got_cormsg: From DATATAKING: vw% 166.87 2010-Jan-07 18:41:02 LOG4 got_cormsg: From DATATAKING: vw% 12.4245719420 2010-Jan-07 18:41:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:41:02 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-07 18:41:02 LOG4 got_cormsg: From DATATAKING: pnt tr 166.87 12.4245719420 -CF 2010-Jan-07 18:41:02 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 18:41:02 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Jan-07 18:41:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:41:16 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Jan-07 18:41:16 INFO3 alfa_motor: ALFA rotator in-position +31.60 degrees 2010-Jan-07 18:41:16 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Jan-07 18:41:16 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2010-Jan-07 18:41:16 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-07 18:41:16 STOP finish_task: Finishing task 'rotate ALFA to +31.6 degrees' 2010-Jan-07 18:41:16 LOG5 finish_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2010-Jan-07 18:41:16 INFO2 finish_task: DONE finished configuration: rotating ALFA to +31.6 degrees 2010-Jan-07 18:41:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 18:41:16 STOP end_task: Finishing task 'rotate ALFA to +31.6 degrees' with status 'OK' 2010-Jan-07 18:41:16 LOG5 end_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2010-Jan-07 18:41:17 START begin_task: Starting task 'waiting on telescope' 2010-Jan-07 18:41:17 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2010-Jan-07 18:41:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Jan-07 18:41:17 LOG3 waittrk: Start waittrk 5 2010-Jan-07 18:41:17 START begin_task: Starting task 'waiting on telescope movement' 2010-Jan-07 18:41:17 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2010-Jan-07 18:41:22 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Jan-07 18:41:22 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2010-Jan-07 18:41:22 START begin_task: Starting task 'waiting on telescope on source' 2010-Jan-07 18:41:22 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2010-Jan-07 18:41:27 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 18:41:27.301 (seconds: 67287.301)!} 2010-Jan-07 18:41:27 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 18:41:27.301 (seconds: 67287.301)! 2010-Jan-07 18:42:18 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Jan-07 18:42:18 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2010-Jan-07 18:42:18 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-07 18:42:18 INFO2 waittrk: Now tracking AGES33PP_p1_093 2010-Jan-07 18:42:18 LOG4 waittrk: Current telescope position: Az = 166.61 ZA = 12.45 2010-Jan-07 18:42:18 STOP finish_task: Finishing task 'waiting on telescope' 2010-Jan-07 18:42:18 LOG5 finish_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2010-Jan-07 18:42:18 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Jan-07 18:42:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 18:42:18 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Jan-07 18:42:18 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2010-Jan-07 18:42:18 START begin_task: Starting task 'selecting calibration type' 2010-Jan-07 18:42:18 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2010-Jan-07 18:42:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-07 18:42:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-07 18:42:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:42:18 START begin_task: Starting task 'waiting on setcal' 2010-Jan-07 18:42:18 LOG5 begin_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2010-Jan-07 18:42:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-07 18:42:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:42:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:42:19 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 18:42:19 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-07 18:42:19 LOG5 end_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2010-Jan-07 18:42:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-07 18:42:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 18:42:19 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-07 18:42:19 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 18:42:19 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2010-Jan-07 18:42:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:42:19 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 18:42:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 18:42:19 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2010-Jan-07 18:42:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 18:42:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-07 18:42:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 18:42:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-07 18:42:19 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 18:42:19 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2010-Jan-07 18:42:19 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 18:42:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 18:42:19 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2010-Jan-07 18:42:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 18:42:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-07 18:42:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-07 18:42:19 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2010-Jan-07 18:42:19 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2010-Jan-07 18:42:19 INFO2 astwait: Waiting for 702 seconds from 22:42:19 to 22:54:01 UTC ... 2010-Jan-07 18:42:19 LOG4 send_obs_status: To obs_status: <1> TASKTIME 702 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Jan-07 18:42:19 START begin_task: Starting task 'waiting on waiting for AST time' 2010-Jan-07 18:42:19 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2010-Jan-07 18:54:01 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2010-Jan-07 18:54:01 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2010-Jan-07 18:54:01 INFO3 astwait: Finished waiting 2010-Jan-07 18:54:01 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Jan-07 18:54:01 LOG5 dopset_later: Calling 'dopset_later 60.930889849776243' 2010-Jan-07 18:54:01 INFO3 dopset_later: Setting Doppler correction for 18:55:01 (60.9 seconds from now) 2010-Jan-07 18:54:01 LOG5 antvel: Calling 'antvel 166.870000 12.424572 F Heliocentric 60.930889849776243' 2010-Jan-07 18:54:01 LOG2 antvel: Transforming current Az = 166.87 ZA = 12.42 to apparent RA = 01:24:34.6 Dec = +30:25:22.8 2010-Jan-07 18:54:01 LOG2 antvel: Parameters to Doppler: Heliocentric 82501 2010 7 0.0 2010-Jan-07 18:54:01 INFO5 antvel: Computed antenna velocity: +27.68006 km/s 2010-Jan-07 18:54:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.680063177499999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-Jan-07 18:54:01 INFO4 dopset_gen: New sky frequencies: 1381.115909 1381.115909 1381.115909 1381.115909 1381.115909 1381.115909 1381.115909 1381.115909 1381.115909 2010-Jan-07 18:54:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.115909 sky0=1381.115909 sky1=1381.115909 sky2=1381.115909 sky3=1381.115909 sky4=1381.115909 sky5=1381.115909 sky6=1381.115909 sky7=1381.115909 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:54:01 LOG2 dopset_gen: Result from 'sky2syn': 1631.115909 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:54:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631115909.0} 2010-Jan-07 18:54:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:54:01 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2010-Jan-07 18:54:01 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2010-Jan-07 18:54:01 INFO5 fixed_driftmap: Tracking J2000 position: RA = 01:23:03.0 Dec = +30:22:15.1 2010-Jan-07 18:54:01 LOG3 track_source: Calling 'track_source AGES33PP_p1_093 012303.0 302215.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-Jan-07 18:54:01 START begin_task: Starting task 'sending tracking commands' 2010-Jan-07 18:54:01 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2010-Jan-07 18:54:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p1_093} INFO {Slewing to source 'AGES33PP_p1_093' ...} 2010-Jan-07 18:54:01 INFO1 track_source: Starting to track AGES33PP_p1_093 2010-Jan-07 18:54:01 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p1_093" 2010-Jan-07 18:54:01 LOG3 vw_send: To DATATAKING: set ra 012303.0 2010-Jan-07 18:54:01 LOG3 vw_send: To DATATAKING: set dec 302215.1 2010-Jan-07 18:54:01 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-07 18:54:01 LOG3 vw_send: To DATATAKING: pnt tr 012303.0 302215.1 -CJ 2010-Jan-07 18:54:01 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 18:54:01 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-07 18:54:01 LOG5 finish_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2010-Jan-07 18:54:01 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-07 18:54:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 18:54:01 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-07 18:54:01 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2010-Jan-07 18:54:01 START begin_task: Starting task 'waiting on telescope' 2010-Jan-07 18:54:01 LOG5 begin_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2010-Jan-07 18:54:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Jan-07 18:54:01 LOG3 waittrk: Start waittrk 5 2010-Jan-07 18:54:01 START begin_task: Starting task 'waiting on telescope movement' 2010-Jan-07 18:54:01 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2010-Jan-07 18:54:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631115909.0} 2010-Jan-07 18:54:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:54:01 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p1_093" 2010-Jan-07 18:54:01 LOG4 got_cormsg: From DATATAKING: set ra 012303.0 2010-Jan-07 18:54:01 LOG4 got_cormsg: From DATATAKING: set dec 302215.1 2010-Jan-07 18:54:01 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Jan-07 18:54:01 LOG4 got_cormsg: From DATATAKING: vw% 012303.0 2010-Jan-07 18:54:01 LOG4 got_cormsg: From DATATAKING: vw% 302215.1 2010-Jan-07 18:54:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:54:01 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-07 18:54:01 LOG4 got_cormsg: From DATATAKING: pnt tr 012303.0 302215.1 -CJ 2010-Jan-07 18:54:01 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 18:54:01 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Jan-07 18:54:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:54:06 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Jan-07 18:54:06 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2010-Jan-07 18:54:06 START begin_task: Starting task 'waiting on telescope on source' 2010-Jan-07 18:54:06 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2010-Jan-07 18:54:08 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Jan-07 18:54:08 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2010-Jan-07 18:54:08 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-07 18:54:08 INFO2 waittrk: Now tracking AGES33PP_p1_093 2010-Jan-07 18:54:08 LOG4 waittrk: Current telescope position: Az = 166.53 ZA = 12.46 2010-Jan-07 18:54:08 STOP finish_task: Finishing task 'waiting on telescope' 2010-Jan-07 18:54:08 LOG5 finish_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2010-Jan-07 18:54:08 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Jan-07 18:54:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 18:54:08 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Jan-07 18:54:08 LOG5 end_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2010-Jan-07 18:54:08 START begin_task: Starting task 'adjusting WAPP+Mock power' 2010-Jan-07 18:54:08 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-Jan-07 18:54:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2010-Jan-07 18:54:08 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2010-Jan-07 18:54:08 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Jan-07 18:54:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Jan-07 18:54:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:54:08 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Jan-07 18:54:08 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2010-Jan-07 18:54:09 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Jan-07 18:54:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:54:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:54:11 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 18:54:11 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Jan-07 18:54:11 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2010-Jan-07 18:54:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Jan-07 18:54:11 START begin_task: Starting task 'adjusting WAPP power' 2010-Jan-07 18:54:11 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2010-Jan-07 18:54:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Jan-07 18:54:11 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 18:54:11 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 18:54:12 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 18:54:12 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 18:54:12 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Jan-07 18:54:12 LOG5 begin_task: Level: (5) ID = <10176> Status = 0 0 0 0 ok 2010-Jan-07 18:54:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:54:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Jan-07 18:54:12 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 7 dB --- beam 1: 7 7 dB 2010-Jan-07 18:54:12 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 5 dB 2010-Jan-07 18:54:12 LOG5 wapp_failed: Calling 'wapp_failed 4' 2010-Jan-07 18:54:12 ERROR wapp_failed: ERROR WAPP-4 failed to complete its current task! 2010-Jan-07 18:54:12 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 4 abort' 2010-Jan-07 18:54:12 START begin_task: Starting task 'handling WAPP failure' 2010-Jan-07 18:54:12 LOG5 begin_task: Level: (6) ID = <10177> Status = 0 0 0 0 ok 2010-Jan-07 18:54:12 NOTE handle_wapp_failure: Will abort task 'running command file '100107.cmd'' since the WAPP failure preference is set to 'abort'! 2010-Jan-07 18:54:12 ALERT handle_wapp_failure: Aborting due to WAPP failure! 2010-Jan-07 18:54:12 LOG1 task_failed: Task 'handling WAPP failure' failed! 2010-Jan-07 18:54:12 LOG5 task_failed: Level: (6) ID = <10177> Status = 0 0 0 0 ok 2010-Jan-07 18:54:12 WARNING abort_task: WARNING abort requested! 2010-Jan-07 18:54:12 WARNING abort_task: WARNING Aborting handling WAPP failure 2010-Jan-07 18:54:12 WARNING abort_task: WARNING Aborting wait for handling WAPP failure 2010-Jan-07 18:54:12 STOP end_task: Finishing task 'handling WAPP failure' with status 'FAILED' 2010-Jan-07 18:54:12 LOG5 end_task: Level: (6) ID = <10177> Status = 1 0 0 1 failed 2010-Jan-07 18:54:12 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'FAILED' 2010-Jan-07 18:54:12 LOG5 end_task: Level: (5) ID = <10176> Status = 1 0 0 1 failed 2010-Jan-07 18:54:12 START begin_task: Starting task 'stopping the WAPPs' 2010-Jan-07 18:54:12 LOG5 begin_task: Level: (5) ID = <10178> Status = 1 0 0 1 failed 2010-Jan-07 18:54:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2010-Jan-07 18:54:12 INFO1 stop_wapp: Stopping the WAPPs 2010-Jan-07 18:54:12 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2010-Jan-07 18:54:12 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2010-Jan-07 18:54:12 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2010-Jan-07 18:54:12 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2010-Jan-07 18:54:12 START begin_task: Starting task 'waiting on stopping WAPPs' 2010-Jan-07 18:54:12 LOG5 begin_task: Level: (6) ID = <10179> Status = 1 0 0 1 failed 2010-Jan-07 18:54:12 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 2 3 dB --- beam 3: 4 4 dB 2010-Jan-07 18:54:12 ERROR WAPP=4-adjust_power: ERROR power adjustment failed! 2010-Jan-07 18:54:12 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'FAILED' 2010-Jan-07 18:54:12 LOG5 end_task: Level: (6) ID = <10179> Status = 1 0 0 1 failed 2010-Jan-07 18:54:12 STOP end_task: Finishing task 'stopping the WAPPs' with status 'FAILED' 2010-Jan-07 18:54:12 LOG5 end_task: Level: (5) ID = <10178> Status = 1 0 0 1 failed 2010-Jan-07 18:54:12 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Jan-07 18:54:12 LOG5 finish_task: Level: (4) ID = <10175> Status = 1 0 0 1 failed 2010-Jan-07 18:54:12 ERROR finish_task: ERROR failed adjusting: WAPP power 2010-Jan-07 18:54:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-Jan-07 18:54:12 STOP end_task: Finishing task 'adjusting WAPP power' with status 'FAILED' 2010-Jan-07 18:54:12 LOG5 end_task: Level: (4) ID = <10175> Status = 1 0 0 1 failed 2010-Jan-07 18:54:13 START begin_task: Starting task 'adjusting Mock spectrometer power' 2010-Jan-07 18:54:13 LOG5 begin_task: Level: (4) ID = <10180> Status = 1 0 0 1 failed 2010-Jan-07 18:54:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Jan-07 18:54:13 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2010-Jan-07 18:54:13 LOG5 finish_task: Level: (4) ID = <10180> Status = 1 0 0 1 failed 2010-Jan-07 18:54:13 ERROR finish_task: ERROR failed adjusting: Mock spectrometer power 2010-Jan-07 18:54:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-Jan-07 18:54:13 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'FAILED' 2010-Jan-07 18:54:13 LOG5 end_task: Level: (4) ID = <10180> Status = 1 0 0 1 failed 2010-Jan-07 18:54:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-07 18:54:13 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2010-Jan-07 18:54:13 LOG5 finish_task: Level: (3) ID = <10173> Status = 1 0 0 1 failed 2010-Jan-07 18:54:13 ERROR finish_task: ERROR failed adjusting: WAPP+Mock power levels 2010-Jan-07 18:54:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-Jan-07 18:54:13 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'FAILED' 2010-Jan-07 18:54:13 LOG5 end_task: Level: (3) ID = <10173> Status = 1 0 0 1 failed 2010-Jan-07 18:54:13 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-Jan-07 18:54:13 LOG5 finish_task: Level: (2) ID = <10157> Status = 1 0 0 1 failed 2010-Jan-07 18:54:13 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2010-Jan-07 18:54:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Jan-07 18:54:13 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2010-Jan-07 18:54:13 LOG5 end_task: Level: (2) ID = <10157> Status = 1 0 0 1 failed 2010-Jan-07 18:54:13 ALERT run_command_file: Stopping command file processing at line 40! 2010-Jan-07 18:54:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Jan-07 18:54:13 STOP finish_task: Finishing task 'running command file '100107.cmd'' 2010-Jan-07 18:54:13 LOG5 finish_task: Level: (1) ID = <10156> Status = 1 0 0 1 failed 2010-Jan-07 18:54:13 ERROR finish_task: ERROR failed running: command file '100107.cmd' 2010-Jan-07 18:54:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Jan-07 18:54:13 END end_task: Finishing task 'running command file '100107.cmd'' with status 'FAILED' 2010-Jan-07 18:54:13 LOG5 end_task: Level: (1) ID = <10156> Status = 1 0 0 1 failed 2010-Jan-07 18:54:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2010-Jan-07 18:54:13 INFO1 WAPP=1+2+3-adjust_power: DONE adjusting power 2010-Jan-07 18:54:13 INFO1 WAPP=1+4-wappcon: Can't abort --- the WAPP isn't running 2010-Jan-07 18:54:13 INFO1 WAPP=2+3-wappcon: Can't abort --- the WAPP isn't running 2010-Jan-07 18:55:19 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima31.cmd' (at lines 1 - 24) 2010-Jan-07 18:55:20 INFO4 CIMA-load_command_file: Loaded command file '100107.cmd' 2010-Jan-07 18:55:23 INFO1 CIMA-run_command_file: Transferring command file '100107.cmd' to executive ... 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima31.conf} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 27 {LOAD ages_mock.conf} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 28 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 29 {CATALOG AGESFull.cat} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 32 {IF LSTSLEW(AGES33PP_p1_091) < 011234 THEN} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 33 {FIXEDDRIFT az=192.10 alfaangle=7.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_091 ra=12400.00 dec=302500.00} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 36 {ENDIF} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 39 {IF LSTSLEW(AGES33PP_p1_093) < 013734 THEN} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 40 {FIXEDDRIFT az=166.87 alfaangle=31.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_093 ra=12400.00 dec=302200.00} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 43 {ENDIF} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 46 {IF LSTSLEW(AGES2082_p3_070) < 021235 THEN} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 47 {FIXEDDRIFT az=212.25 alfaangle=-10.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_070 ra=23100.00 dec=250430.00} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 50 {ENDIF} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 53 {IF LSTSLEW(AGES2082_p3_072) < 022505 THEN} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 54 {FIXEDDRIFT az=192.37 alfaangle=8.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_072 ra=23100.00 dec=250130.00} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 57 {ENDIF} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 29 60 {IF LSTSLEW(AGES2082_p3_074) < 023805 THEN} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 30 61 {FIXEDDRIFT az=167.53 alfaangle=30.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_074 ra=23100.00 dec=245830.00} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 31 64 {ENDIF} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 32 67 {IF LSTSLEW(AGES2082_p3_076) < 025035 THEN} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 33 68 {FIXEDDRIFT az=147.15 alfaangle=49.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_076 ra=23100.00 dec=245530.00} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 34 71 {ENDIF} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 35 74 {IF LSTSLEW(AGES2082_p3_078) < 030235 THEN} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 36 75 {FIXEDDRIFT az=133.73 alfaangle=63.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_078 ra=23100.00 dec=245230.00} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 37 78 {ENDIF} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 38 81 {IF LSTSLEW(AGES2082_p3_080) < 031435 THEN} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 39 82 {FIXEDDRIFT az=125.01 alfaangle=74.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_080 ra=23100.00 dec=244930.00} 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 40 85 {ENDIF} 2010-Jan-07 18:55:23 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Jan-07 18:55:23 LOG4 exec_msg: From OBSERVER: run_command_file 100107.cmd 1 1 40 2010-Jan-07 18:55:23 LOG4 run_command_file: Calling 'run_command_file 100107.cmd 1 1 40' 2010-Jan-07 18:55:23 BEGIN begin_task: Starting task 'running command file '100107.cmd'' 2010-Jan-07 18:55:24 LOG5 begin_task: Level: (1) ID = <10181> Status = 0 0 0 0 ok 2010-Jan-07 18:55:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100107.cmd' ...} 2010-Jan-07 18:55:24 NOTE run_command_file: Starting execution of command file '100107.cmd' from line 1 2010-Jan-07 18:55:24 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima31.conf' 2010-Jan-07 18:55:24 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Jan-07 18:55:24 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-07 18:55:24 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Jan-07 18:55:24 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2010-Jan-07 18:55:24 LOG2 CIMA-antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02132 J 2010-Jan-07 18:55:24 LOG2 CIMA-antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:55:24 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 82523 2010 7 0.0 2010-Jan-07 18:55:24 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Jan-07 18:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Jan-07 18:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Jan-07 18:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Jan-07 18:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Jan-07 18:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-Jan-07 18:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Jan-07 18:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2010-Jan-07 18:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2010-Jan-07 18:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2010-Jan-07 18:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2010-Jan-07 18:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2010-Jan-07 18:55:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Jan-07 18:55:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Jan-07 18:55:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Jan-07 18:55:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Jan-07 18:55:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Jan-07 18:55:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Jan-07 18:55:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Jan-07 18:55:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Jan-07 18:55:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Jan-07 18:55:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Jan-07 18:55:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Jan-07 18:55:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Jan-07 18:55:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Jan-07 18:55:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Jan-07 18:55:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Jan-07 18:55:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Jan-07 18:55:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Jan-07 18:55:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Jan-07 18:55:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Jan-07 18:55:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Jan-07 18:55:26 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-07 18:55:26 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Jan-07 18:55:26 LOG5 begin_task: Level: (2) ID = <10182> Status = 0 0 0 0 ok 2010-Jan-07 18:55:26 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Jan-07 18:55:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Jan-07 18:55:26 LOG1 config_iflo: Receiver ALFA already selected 2010-Jan-07 18:55:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 18:55:26 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-07 18:55:26 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 18:55:26 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2010-Jan-07 18:55:26 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 18:55:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 18:55:26 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2010-Jan-07 18:55:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 18:55:26 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-07 18:55:26 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-Jan-07 18:55:26 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-Jan-07 18:55:26 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Jan-07 18:55:26 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Jan-07 18:55:26 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-Jan-07 18:55:26 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-Jan-07 18:55:26 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-Jan-07 18:55:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Jan-07 18:55:26 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-Jan-07 18:55:26 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-Jan-07 18:55:26 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Jan-07 18:55:26 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Jan-07 18:55:26 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Jan-07 18:55:26 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Jan-07 18:55:26 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Jan-07 18:55:26 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-Jan-07 18:55:26 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-Jan-07 18:55:26 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-Jan-07 18:55:26 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-Jan-07 18:55:26 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Jan-07 18:55:26 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-Jan-07 18:55:26 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-Jan-07 18:55:26 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Jan-07 18:55:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:55:27 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-Jan-07 18:55:27 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-Jan-07 18:55:27 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Jan-07 18:55:27 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-Jan-07 18:55:27 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-Jan-07 18:55:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Jan-07 18:55:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:55:27 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Jan-07 18:55:27 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-Jan-07 18:55:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Jan-07 18:55:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Jan-07 18:55:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:55:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:55:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:55:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:55:27 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-Jan-07 18:55:27 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Jan-07 18:55:27 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-Jan-07 18:55:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Jan-07 18:55:27 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Jan-07 18:55:27 LOG5 finish_task: Level: (2) ID = <10182> Status = 0 0 0 0 ok 2010-Jan-07 18:55:27 DONE finish_task: DONE finished configuration: IF/LO path 2010-Jan-07 18:55:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-07 18:55:27 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Jan-07 18:55:27 LOG5 end_task: Level: (2) ID = <10182> Status = 0 0 0 0 ok 2010-Jan-07 18:55:27 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Jan-07 18:55:27 LOG5 begin_task: Level: (2) ID = <10185> Status = 0 0 0 0 ok 2010-Jan-07 18:55:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Jan-07 18:55:27 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Jan-07 18:55:27 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Jan-07 18:55:27 START begin_task: Starting task 'selecting calibration port' 2010-Jan-07 18:55:27 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2010-Jan-07 18:55:27 LOG3 vw_send: To DATATAKING: calport 3 2010-Jan-07 18:55:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Jan-07 18:55:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:55:27 START begin_task: Starting task 'waiting on calport' 2010-Jan-07 18:55:27 LOG5 begin_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2010-Jan-07 18:55:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:55:27 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Jan-07 18:55:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:55:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:55:28 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 18:55:28 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Jan-07 18:55:28 LOG5 end_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2010-Jan-07 18:55:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Jan-07 18:55:28 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Jan-07 18:55:28 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2010-Jan-07 18:55:28 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-07 18:55:28 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-07 18:55:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-07 18:55:28 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2010-Jan-07 18:55:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:55:28 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-07 18:55:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-07 18:55:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-07 18:55:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-07 18:55:28 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2010-Jan-07 18:55:28 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Jan-07 18:55:28 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Jan-07 18:55:28 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Jan-07 18:55:28 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Jan-07 18:55:28 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Jan-07 18:55:28 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Jan-07 18:55:28 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Jan-07 18:55:28 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Jan-07 18:55:28 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2010-Jan-07 18:55:28 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2010-Jan-07 18:55:28 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2010-Jan-07 18:55:28 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2010-Jan-07 18:55:28 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Jan-07 18:55:28 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Jan-07 18:55:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-07 18:55:28 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2010-Jan-07 18:55:28 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-07 18:55:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Jan-07 18:55:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-07 18:55:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Jan-07 18:55:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-07 18:55:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-07 18:55:28 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2010-Jan-07 18:55:28 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-Jan-07 18:55:28 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Jan-07 18:55:28 LOG5 finish_task: Level: (2) ID = <10185> Status = 0 0 0 0 ok 2010-Jan-07 18:55:28 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Jan-07 18:55:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-07 18:55:28 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Jan-07 18:55:28 LOG5 end_task: Level: (2) ID = <10185> Status = 0 0 0 0 ok 2010-Jan-07 18:55:28 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2010-Jan-07 18:55:28 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2010-Jan-07 18:55:28 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2010-Jan-07 18:55:28 LOG3 is_if_valid: Current source data: up 157.0 13.0 UP - - 46 0.3 2010-Jan-07 18:55:28 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2010-Jan-07 18:55:28 INFO5 is_if_valid: Condition parsed as: 1 2010-Jan-07 18:55:28 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2010-Jan-07 18:55:28 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2010-Jan-07 18:55:28 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2010-Jan-07 18:55:28 LOG5 begin_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2010-Jan-07 18:55:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2010-Jan-07 18:55:29 LOG3 track_source: Calling 'track_source galfasrc 011400.0 +301130 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2010-Jan-07 18:55:29 START begin_task: Starting task 'sending tracking commands' 2010-Jan-07 18:55:29 LOG5 begin_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2010-Jan-07 18:55:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2010-Jan-07 18:55:29 INFO1 track_source: Starting to track galfasrc 2010-Jan-07 18:55:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2010-Jan-07 18:55:29 LOG3 vw_send: To DATATAKING: set ra 011400.0 2010-Jan-07 18:55:29 LOG3 vw_send: To DATATAKING: set dec +301130 2010-Jan-07 18:55:29 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-07 18:55:29 LOG3 vw_send: To DATATAKING: pnt tr 011400.0 +301130 -CJ 2010-Jan-07 18:55:29 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Jan-07 18:55:29 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-07 18:55:29 LOG5 finish_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2010-Jan-07 18:55:29 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-07 18:55:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 18:55:29 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-07 18:55:29 LOG5 end_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2010-Jan-07 18:55:29 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2010-Jan-07 18:55:29 LOG5 finish_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2010-Jan-07 18:55:29 DONE finish_task: DONE finished tracking: source 'galfasrc' 2010-Jan-07 18:55:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-07 18:55:29 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2010-Jan-07 18:55:29 LOG5 end_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2010-Jan-07 18:55:29 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2010-Jan-07 18:55:29 INFO1 run_command_line: Skipping line 'ELSEIF isup(galfasrc2) then' since an earlier condition already has been true 2010-Jan-07 18:55:29 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2010-Jan-07 18:55:29 INFO1 run_command_line: Skipping line 'GOTO galfasrc2' in non-true conditional branch 2010-Jan-07 18:55:29 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2010-Jan-07 18:55:29 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2010-Jan-07 18:55:29 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2010-Jan-07 18:55:29 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2010-Jan-07 18:55:29 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2010-Jan-07 18:55:29 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2010-Jan-07 18:55:29 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2010-Jan-07 18:55:29 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2010-Jan-07 18:55:29 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2010-Jan-07 18:55:29 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Jan-07 18:55:29 LOG5 begin_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2010-Jan-07 18:55:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Jan-07 18:55:29 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Jan-07 18:55:29 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-Jan-07 18:55:29 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Jan-07 18:55:29 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Jan-07 18:55:29 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2010-Jan-07 18:55:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2010-Jan-07 18:55:29 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Jan-07 18:55:29 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2010-Jan-07 18:55:29 LOG4 got_cormsg: From DATATAKING: set ra 011400.0 2010-Jan-07 18:55:30 LOG4 got_cormsg: From DATATAKING: set dec +301130 2010-Jan-07 18:55:30 LOG4 got_cormsg: From DATATAKING: vw% 011400.0 2010-Jan-07 18:55:30 LOG4 got_cormsg: From DATATAKING: vw% +301130 2010-Jan-07 18:55:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:55:30 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-07 18:55:30 LOG4 got_cormsg: From DATATAKING: pnt tr 011400.0 +301130 -CJ 2010-Jan-07 18:55:30 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Jan-07 18:55:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Jan-07 18:55:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:55:37 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Jan-07 18:55:37 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Jan-07 18:55:37 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Jan-07 18:55:37 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2010-Jan-07 18:55:37 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Jan-07 18:55:37 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Jan-07 18:55:37 LOG5 finish_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2010-Jan-07 18:55:37 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Jan-07 18:55:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-07 18:55:38 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Jan-07 18:55:38 LOG5 end_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2010-Jan-07 18:55:38 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2010-Jan-07 18:55:38 BEGIN begin_task: Starting task 'waiting on telescope' 2010-Jan-07 18:55:38 LOG5 begin_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2010-Jan-07 18:55:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Jan-07 18:55:38 LOG3 waittrk: Start waittrk 5 2010-Jan-07 18:55:38 START begin_task: Starting task 'waiting on telescope movement' 2010-Jan-07 18:55:38 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-Jan-07 18:55:43 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Jan-07 18:55:43 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-Jan-07 18:55:43 START begin_task: Starting task 'waiting on telescope on source' 2010-Jan-07 18:55:43 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2010-Jan-07 18:56:06 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Jan-07 18:56:06 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2010-Jan-07 18:56:06 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Jan-07 18:56:06 INFO2 waittrk: Now tracking galfasrc 2010-Jan-07 18:56:06 LOG4 waittrk: Current telescope position: Az = 156.14 ZA = 13.12 2010-Jan-07 18:56:06 STOP finish_task: Finishing task 'waiting on telescope' 2010-Jan-07 18:56:06 LOG5 finish_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2010-Jan-07 18:56:06 DONE finish_task: DONE finished waiting: telescope on source 2010-Jan-07 18:56:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-07 18:56:06 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Jan-07 18:56:06 LOG5 end_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2010-Jan-07 18:56:06 COMMAND run_command_line: EXECUTING command 20: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2010-Jan-07 18:56:06 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2010-Jan-07 18:56:06 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-07 18:56:06 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2010-Jan-07 18:56:06 BEGIN begin_task: Starting task 'smart frequency switching' 2010-Jan-07 18:56:06 LOG5 begin_task: Level: (2) ID = <10197> Status = 0 0 0 0 ok 2010-Jan-07 18:56:06 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2010-Jan-07 18:56:06 INFO1 smartfreq: Starting pattern: Smart frequency switching 2010-Jan-07 18:56:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2010-Jan-07 18:56:06 START begin_task: Starting task 'selecting calibration type' 2010-Jan-07 18:56:06 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2010-Jan-07 18:56:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-07 18:56:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-07 18:56:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:56:07 START begin_task: Starting task 'waiting on setcal' 2010-Jan-07 18:56:07 LOG5 begin_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2010-Jan-07 18:56:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-07 18:56:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:56:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:56:07 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 18:56:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-07 18:56:07 LOG5 end_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2010-Jan-07 18:56:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-07 18:56:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 18:56:07 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-07 18:56:07 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 18:56:07 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2010-Jan-07 18:56:07 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 18:56:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 18:56:07 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2010-Jan-07 18:56:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 18:56:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-07 18:56:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 18:56:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-07 18:56:07 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 18:56:07 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2010-Jan-07 18:56:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:56:07 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 18:56:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 18:56:07 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2010-Jan-07 18:56:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 18:56:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-07 18:56:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-07 18:56:07 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2010-Jan-07 18:56:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2010-Jan-07 18:56:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2010-Jan-07 18:56:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2010-Jan-07 18:56:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2010-Jan-07 18:56:07 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2010-Jan-07 18:56:07 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-Jan-07 18:56:07 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Jan-07 18:56:07 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-07 18:56:07 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-07 18:56:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-07 18:56:07 LOG5 begin_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2010-Jan-07 18:56:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2010-Jan-07 18:56:07 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-07 18:56:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-07 18:56:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-07 18:56:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-07 18:56:07 LOG5 end_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2010-Jan-07 18:56:07 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Jan-07 18:56:07 START begin_task: Starting task 'adjusting WAPP power' 2010-Jan-07 18:56:07 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2010-Jan-07 18:56:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Jan-07 18:56:07 INFO2 adjust_power: Starting to adjust WAPP power 2010-Jan-07 18:56:07 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Jan-07 18:56:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Jan-07 18:56:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:56:07 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Jan-07 18:56:07 LOG5 begin_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2010-Jan-07 18:56:07 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Jan-07 18:56:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:56:08 NOTE WAPPDATA-new_file: New FITS file: wapp.20100107.a2048.0002.fits 2010-Jan-07 18:56:08 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100107.a2048.0002.fits} 2010-Jan-07 18:56:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:56:10 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 18:56:10 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Jan-07 18:56:10 LOG5 end_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2010-Jan-07 18:56:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Jan-07 18:56:10 START begin_task: Starting task 'adjusting WAPP power' 2010-Jan-07 18:56:10 LOG5 begin_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2010-Jan-07 18:56:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Jan-07 18:56:10 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 18:56:10 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 18:56:10 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 18:56:10 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 18:56:11 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Jan-07 18:56:11 LOG5 begin_task: Level: (5) ID = <10206> Status = 0 0 0 0 ok 2010-Jan-07 18:56:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:56:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Jan-07 18:56:11 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 7 dB --- beam 1: 7 7 dB 2010-Jan-07 18:56:11 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 5 dB 2010-Jan-07 18:56:11 LOG5 wapp_failed: Calling 'wapp_failed 4' 2010-Jan-07 18:56:11 ERROR wapp_failed: ERROR WAPP-4 failed to complete its current task! 2010-Jan-07 18:56:11 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 4 abort' 2010-Jan-07 18:56:11 START begin_task: Starting task 'handling WAPP failure' 2010-Jan-07 18:56:11 LOG5 begin_task: Level: (6) ID = <10207> Status = 0 0 0 0 ok 2010-Jan-07 18:56:11 NOTE handle_wapp_failure: Will abort task 'running command file '100107.cmd'' since the WAPP failure preference is set to 'abort'! 2010-Jan-07 18:56:11 ALERT handle_wapp_failure: Aborting due to WAPP failure! 2010-Jan-07 18:56:11 LOG1 task_failed: Task 'handling WAPP failure' failed! 2010-Jan-07 18:56:11 LOG5 task_failed: Level: (6) ID = <10207> Status = 0 0 0 0 ok 2010-Jan-07 18:56:11 WARNING abort_task: WARNING abort requested! 2010-Jan-07 18:56:11 WARNING abort_task: WARNING Aborting handling WAPP failure 2010-Jan-07 18:56:11 WARNING abort_task: WARNING Aborting wait for handling WAPP failure 2010-Jan-07 18:56:11 STOP end_task: Finishing task 'handling WAPP failure' with status 'FAILED' 2010-Jan-07 18:56:11 LOG5 end_task: Level: (6) ID = <10207> Status = 1 0 0 1 failed 2010-Jan-07 18:56:11 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'FAILED' 2010-Jan-07 18:56:11 LOG5 end_task: Level: (5) ID = <10206> Status = 1 0 0 1 failed 2010-Jan-07 18:56:11 START begin_task: Starting task 'stopping the WAPPs' 2010-Jan-07 18:56:11 LOG5 begin_task: Level: (5) ID = <10208> Status = 1 0 0 1 failed 2010-Jan-07 18:56:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2010-Jan-07 18:56:11 INFO1 stop_wapp: Stopping the WAPPs 2010-Jan-07 18:56:11 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2010-Jan-07 18:56:11 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2010-Jan-07 18:56:11 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2010-Jan-07 18:56:11 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2010-Jan-07 18:56:11 START begin_task: Starting task 'waiting on stopping WAPPs' 2010-Jan-07 18:56:11 LOG5 begin_task: Level: (6) ID = <10209> Status = 1 0 0 1 failed 2010-Jan-07 18:56:11 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 2 3 dB --- beam 3: 4 4 dB 2010-Jan-07 18:56:11 ERROR WAPP=4-adjust_power: ERROR power adjustment failed! 2010-Jan-07 18:56:11 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'FAILED' 2010-Jan-07 18:56:11 LOG5 end_task: Level: (6) ID = <10209> Status = 1 0 0 1 failed 2010-Jan-07 18:56:11 STOP end_task: Finishing task 'stopping the WAPPs' with status 'FAILED' 2010-Jan-07 18:56:11 LOG5 end_task: Level: (5) ID = <10208> Status = 1 0 0 1 failed 2010-Jan-07 18:56:11 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Jan-07 18:56:11 LOG5 finish_task: Level: (4) ID = <10205> Status = 1 0 0 1 failed 2010-Jan-07 18:56:11 ERROR finish_task: ERROR failed adjusting: WAPP power 2010-Jan-07 18:56:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-Jan-07 18:56:11 STOP end_task: Finishing task 'adjusting WAPP power' with status 'FAILED' 2010-Jan-07 18:56:11 LOG5 end_task: Level: (4) ID = <10205> Status = 1 0 0 1 failed 2010-Jan-07 18:56:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-07 18:56:11 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Jan-07 18:56:11 LOG5 finish_task: Level: (3) ID = <10203> Status = 1 0 0 1 failed 2010-Jan-07 18:56:11 ERROR finish_task: ERROR failed adjusting: WAPP power levels 2010-Jan-07 18:56:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-Jan-07 18:56:12 STOP end_task: Finishing task 'adjusting WAPP power' with status 'FAILED' 2010-Jan-07 18:56:12 LOG5 end_task: Level: (3) ID = <10203> Status = 1 0 0 1 failed 2010-Jan-07 18:56:12 INFO2 smartfreq: Switching off CAL 2010-Jan-07 18:56:12 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-07 18:56:12 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-07 18:56:12 INFO3 restore_frequencies: Restoring original frequencies 2010-Jan-07 18:56:12 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-07 18:56:12 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02133 J 2010-Jan-07 18:56:12 LOG2 antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:56:12 LOG2 antvel: Parameters to Doppler: Topocentric 82571 2010 7 0.0 2010-Jan-07 18:56:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:56:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2010-Jan-07 18:56:12 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2010-Jan-07 18:56:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 18:56:12 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 18:56:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Jan-07 18:56:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:56:12 STOP finish_task: Finishing task 'smart frequency switching' 2010-Jan-07 18:56:12 LOG5 finish_task: Level: (2) ID = <10197> Status = 1 0 0 1 failed 2010-Jan-07 18:56:12 ERROR finish_task: ERROR failed pattern: smart frequency switching 2010-Jan-07 18:56:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Jan-07 18:56:12 END end_task: Finishing task 'smart frequency switching' with status 'FAILED' 2010-Jan-07 18:56:12 LOG5 end_task: Level: (2) ID = <10197> Status = 1 0 0 1 failed 2010-Jan-07 18:56:12 ALERT run_command_file: Stopping command file processing at line 20! 2010-Jan-07 18:56:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Jan-07 18:56:12 STOP finish_task: Finishing task 'running command file '100107.cmd'' 2010-Jan-07 18:56:12 LOG5 finish_task: Level: (1) ID = <10181> Status = 1 0 0 1 failed 2010-Jan-07 18:56:12 ERROR finish_task: ERROR failed running: command file '100107.cmd' 2010-Jan-07 18:56:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Jan-07 18:56:12 END end_task: Finishing task 'running command file '100107.cmd'' with status 'FAILED' 2010-Jan-07 18:56:12 LOG5 end_task: Level: (1) ID = <10181> Status = 1 0 0 1 failed 2010-Jan-07 18:56:12 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-07 18:56:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2010-Jan-07 18:56:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Jan-07 18:56:12 INFO1 WAPP=1+2+3-adjust_power: DONE adjusting power 2010-Jan-07 18:56:12 INFO1 WAPP=1+4-wappcon: Can't abort --- the WAPP isn't running 2010-Jan-07 18:56:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-07 18:56:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:56:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-07 18:56:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:56:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:56:12 INFO1 WAPP=2+3-wappcon: Can't abort --- the WAPP isn't running 2010-Jan-07 18:56:22 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-Jan-07 18:56:22 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-Jan-07 18:56:22 LOG5 restart_wapp: Calling 'restart_wapp' 2010-Jan-07 18:56:22 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-Jan-07 18:56:22 LOG5 begin_task: Level: (1) ID = <10210> Status = 0 0 0 0 ok 2010-Jan-07 18:56:22 NOTE restart_wapp: Restarting all WAPPs 2010-Jan-07 18:56:22 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-Jan-07 18:56:22 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-Jan-07 18:56:22 LOG5 end_task: Level: (1) ID = <10210> Status = 0 0 0 0 ok 2010-Jan-07 18:56:22 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Jan-07 18:56:22 LOG3 exec_msg: Closing socket 2010-Jan-07 18:56:22 LOG3 exec_msg: Closing socket 2010-Jan-07 18:56:22 LOG3 exec_msg: Closing socket 2010-Jan-07 18:56:22 LOG3 exec_msg: Closing socket 2010-Jan-07 18:56:24 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-Jan-07 18:56:25 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-Jan-07 18:56:25 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-Jan-07 18:56:25 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-Jan-07 18:56:26 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 18:56:26.301 (seconds: 68186.301)!} 2010-Jan-07 18:56:26 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 18:56:26.301 (seconds: 68186.301)! 2010-Jan-07 18:56:29 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Jan-07 18:56:29 LOG4 exec_msg: From OBSERVER: run_command_file 100107.cmd 22 1 40 2010-Jan-07 18:56:29 LOG4 run_command_file: Calling 'run_command_file 100107.cmd 22 1 40' 2010-Jan-07 18:56:29 BEGIN begin_task: Starting task 'running command file '100107.cmd'' 2010-Jan-07 18:56:29 LOG5 begin_task: Level: (1) ID = <10211> Status = 0 0 0 0 ok 2010-Jan-07 18:56:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100107.cmd' ...} 2010-Jan-07 18:56:29 NOTE run_command_file: Starting execution of command file '100107.cmd' from line 22 2010-Jan-07 18:56:29 COMMAND run_command_line: EXECUTING command 27: 'LOAD ages_mock.conf' 2010-Jan-07 18:56:29 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Jan-07 18:56:29 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-07 18:56:29 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Jan-07 18:56:29 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2010-Jan-07 18:56:29 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2010-Jan-07 18:56:29 LOG2 CIMA-antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.02133 J 2010-Jan-07 18:56:29 LOG2 CIMA-antvel: Computed apparent RA = 01:14:34.3 Dec = +30:14:55.7 2010-Jan-07 18:56:29 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 82589 2010 7 0.0 2010-Jan-07 18:56:29 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Jan-07 18:56:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2010-Jan-07 18:56:31 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2010-Jan-07 18:56:32 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2010-Jan-07 18:56:32 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2010-Jan-07 18:56:32 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2010-Jan-07 18:56:32 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2010-Jan-07 18:56:32 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2010-Jan-07 18:56:32 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2010-Jan-07 18:56:32 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2010-Jan-07 18:56:32 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2010-Jan-07 18:56:32 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2010-Jan-07 18:56:32 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2010-Jan-07 18:56:32 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2010-Jan-07 18:56:32 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2010-Jan-07 18:56:32 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2010-Jan-07 18:56:32 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2010-Jan-07 18:56:32 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2010-Jan-07 18:56:32 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2010-Jan-07 18:56:32 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2010-Jan-07 18:56:32 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2010-Jan-07 18:56:32 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2010-Jan-07 18:56:32 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2010-Jan-07 18:56:32 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2010-Jan-07 18:56:32 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2010-Jan-07 18:56:32 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2010-Jan-07 18:56:32 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-07 18:56:32 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Jan-07 18:56:32 LOG5 begin_task: Level: (2) ID = <10212> Status = 0 0 0 0 ok 2010-Jan-07 18:56:32 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Jan-07 18:56:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Jan-07 18:56:32 LOG1 config_iflo: Receiver ALFA already selected 2010-Jan-07 18:56:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 18:56:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-07 18:56:32 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 18:56:32 LOG5 begin_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2010-Jan-07 18:56:32 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 18:56:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 18:56:32 LOG5 end_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2010-Jan-07 18:56:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 18:56:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-07 18:56:32 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-Jan-07 18:56:32 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-Jan-07 18:56:32 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Jan-07 18:56:32 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Jan-07 18:56:32 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-Jan-07 18:56:32 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-Jan-07 18:56:32 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-Jan-07 18:56:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2010-Jan-07 18:56:32 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-Jan-07 18:56:32 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-Jan-07 18:56:32 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Jan-07 18:56:32 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Jan-07 18:56:32 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Jan-07 18:56:32 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Jan-07 18:56:32 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Jan-07 18:56:32 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-Jan-07 18:56:32 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-Jan-07 18:56:32 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-Jan-07 18:56:32 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-Jan-07 18:56:32 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Jan-07 18:56:32 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-Jan-07 18:56:32 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-Jan-07 18:56:32 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Jan-07 18:56:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:56:32 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-Jan-07 18:56:32 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-Jan-07 18:56:32 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Jan-07 18:56:32 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-Jan-07 18:56:32 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-Jan-07 18:56:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Jan-07 18:56:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:56:32 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Jan-07 18:56:32 LOG5 begin_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2010-Jan-07 18:56:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2010-Jan-07 18:56:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Jan-07 18:56:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 18:56:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:56:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:56:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:56:33 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-Jan-07 18:56:33 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Jan-07 18:56:33 LOG5 end_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2010-Jan-07 18:56:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Jan-07 18:56:33 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Jan-07 18:56:33 LOG5 finish_task: Level: (2) ID = <10212> Status = 0 0 0 0 ok 2010-Jan-07 18:56:33 DONE finish_task: DONE finished configuration: IF/LO path 2010-Jan-07 18:56:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-07 18:56:33 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Jan-07 18:56:33 LOG5 end_task: Level: (2) ID = <10212> Status = 0 0 0 0 ok 2010-Jan-07 18:56:33 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Jan-07 18:56:33 LOG5 begin_task: Level: (2) ID = <10215> Status = 0 0 0 0 ok 2010-Jan-07 18:56:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Jan-07 18:56:33 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Jan-07 18:56:33 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Jan-07 18:56:33 START begin_task: Starting task 'selecting calibration port' 2010-Jan-07 18:56:33 LOG5 begin_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2010-Jan-07 18:56:33 LOG3 vw_send: To DATATAKING: calport 3 2010-Jan-07 18:56:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Jan-07 18:56:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:56:33 START begin_task: Starting task 'waiting on calport' 2010-Jan-07 18:56:33 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2010-Jan-07 18:56:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:56:33 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Jan-07 18:56:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:56:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:56:33 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 18:56:33 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Jan-07 18:56:33 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2010-Jan-07 18:56:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Jan-07 18:56:33 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Jan-07 18:56:33 LOG5 end_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2010-Jan-07 18:56:33 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-07 18:56:33 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-07 18:56:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-07 18:56:33 LOG5 begin_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2010-Jan-07 18:56:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:56:33 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-07 18:56:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-07 18:56:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-07 18:56:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-07 18:56:33 LOG5 end_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2010-Jan-07 18:56:33 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Jan-07 18:56:33 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Jan-07 18:56:33 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Jan-07 18:56:33 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Jan-07 18:56:33 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Jan-07 18:56:33 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Jan-07 18:56:33 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Jan-07 18:56:34 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Jan-07 18:56:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2010-Jan-07 18:56:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2010-Jan-07 18:56:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2010-Jan-07 18:56:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2010-Jan-07 18:56:34 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Jan-07 18:56:34 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Jan-07 18:56:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-07 18:56:34 LOG5 begin_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2010-Jan-07 18:56:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Jan-07 18:56:34 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-07 18:56:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Jan-07 18:56:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-07 18:56:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2010-Jan-07 18:56:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-07 18:56:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-07 18:56:34 LOG5 end_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2010-Jan-07 18:56:34 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-Jan-07 18:56:34 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Jan-07 18:56:34 LOG5 finish_task: Level: (2) ID = <10215> Status = 0 0 0 0 ok 2010-Jan-07 18:56:34 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Jan-07 18:56:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-07 18:56:34 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Jan-07 18:56:34 LOG5 end_task: Level: (2) ID = <10215> Status = 0 0 0 0 ok 2010-Jan-07 18:56:34 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2010-Jan-07 18:56:34 LOG5 begin_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2010-Jan-07 18:56:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2010-Jan-07 18:56:34 INFO1 config_mock: Starting to configure the Mock spectrometer 2010-Jan-07 18:56:34 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Jan-07 18:56:34 START begin_task: Starting task 'selecting calibration port' 2010-Jan-07 18:56:34 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2010-Jan-07 18:56:34 LOG3 vw_send: To DATATAKING: calport 3 2010-Jan-07 18:56:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Jan-07 18:56:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:56:34 START begin_task: Starting task 'waiting on calport' 2010-Jan-07 18:56:34 LOG5 begin_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2010-Jan-07 18:56:34 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Jan-07 18:56:34 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Jan-07 18:56:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:56:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:56:34 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 18:56:34 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Jan-07 18:56:34 LOG5 end_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2010-Jan-07 18:56:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Jan-07 18:56:34 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Jan-07 18:56:34 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2010-Jan-07 18:56:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-07 18:56:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-07 18:56:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-07 18:56:34 LOG5 begin_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2010-Jan-07 18:56:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:56:34 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-07 18:56:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-07 18:56:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-07 18:56:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-07 18:56:34 LOG5 end_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2010-Jan-07 18:56:34 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Jan-07 18:56:34 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Jan-07 18:56:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-07 18:56:34 LOG5 begin_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2010-Jan-07 18:56:35 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-07 18:56:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-07 18:56:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-07 18:56:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-07 18:56:35 LOG5 end_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2010-Jan-07 18:56:35 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2010-Jan-07 18:56:35 LOG3 socket_wait: To MOCK: NOP 2010-Jan-07 18:56:35 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2010-Jan-07 18:56:35 LOG5 begin_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2010-Jan-07 18:56:35 LOG4 from_mock: From MOCK: nop ok 2010-Jan-07 18:56:35 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2010-Jan-07 18:56:35 LOG5 end_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2010-Jan-07 18:56:35 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2010-Jan-07 18:56:35 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2010-Jan-07 18:56:35 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2010-Jan-07 18:56:35 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2010-Jan-07 18:56:35 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2010-Jan-07 18:56:35 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2010-Jan-07 18:56:35 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2010-Jan-07 18:56:35 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2010-Jan-07 18:56:35 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2010-Jan-07 18:56:35 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2010-Jan-07 18:56:35 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2010-Jan-07 18:56:35 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2010-Jan-07 18:56:35 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2010-Jan-07 18:56:35 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2010-Jan-07 18:56:35 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2010-Jan-07 18:56:35 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2010-Jan-07 18:56:35 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2010-Jan-07 18:56:35 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2010-Jan-07 18:56:35 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2010-Jan-07 18:56:35 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2010-Jan-07 18:56:35 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2010-Jan-07 18:56:35 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2010-Jan-07 18:56:35 LOG5 begin_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2010-Jan-07 18:56:35 LOG4 from_mock: From MOCK: confok 2010-Jan-07 18:56:35 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2010-Jan-07 18:56:35 LOG5 end_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2010-Jan-07 18:56:35 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2010-Jan-07 18:56:35 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2010-Jan-07 18:56:35 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2010-Jan-07 18:56:35 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2010-Jan-07 18:56:35 LOG5 begin_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2010-Jan-07 18:56:35 LOG4 from_mock: From MOCK: confok 2010-Jan-07 18:56:35 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2010-Jan-07 18:56:35 LOG5 end_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2010-Jan-07 18:56:35 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2010-Jan-07 18:56:35 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2010-Jan-07 18:56:35 LOG5 finish_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2010-Jan-07 18:56:35 DONE finish_task: DONE finished configuring: the Mock spectrometer 2010-Jan-07 18:56:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-07 18:56:35 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2010-Jan-07 18:56:35 LOG5 end_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2010-Jan-07 18:56:35 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2010-Jan-07 18:56:35 COMMAND run_command_line: EXECUTING command 28: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2010-Jan-07 18:56:35 COMMAND run_command_line: EXECUTING command 29: 'CATALOG AGESFull.cat' 2010-Jan-07 18:56:35 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2010-Jan-07 18:56:35 COMMAND run_command_line: EXECUTING command 32: 'IF LSTSLEW(AGES33PP_p1_091) < 011234 THEN' 2010-Jan-07 18:56:36 LOG3 is_if_valid: Current source data: up 165.4 12.6 UP - - 54 0.4 2010-Jan-07 18:56:36 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES33PP_p1_091) < 011234 2010-Jan-07 18:56:36 INFO5 is_if_valid: Condition parsed as: 1.6591366666666667 < 1.2094444444444443 2010-Jan-07 18:56:36 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES33PP_p1_091) < 011234 THEN' 2010-Jan-07 18:56:36 COMMAND run_command_line: EXECUTING command 33: 'FIXEDDRIFT az=192.10 alfaangle=7.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_091 ra=12400.00 dec=302500.00' 2010-Jan-07 18:56:36 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=192.10 alfaangle=7.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_091 ra=12400.00 dec=302500.00' in non-true conditional branch 2010-Jan-07 18:56:36 COMMAND run_command_line: EXECUTING command 36: 'ENDIF' 2010-Jan-07 18:56:36 COMMAND run_command_line: EXECUTING command 39: 'IF LSTSLEW(AGES33PP_p1_093) < 013734 THEN' 2010-Jan-07 18:56:37 LOG3 is_if_valid: Current source data: up 165.3 12.5 UP - - 54 0.4 2010-Jan-07 18:56:37 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES33PP_p1_093) < 013734 2010-Jan-07 18:56:37 INFO5 is_if_valid: Condition parsed as: 1.6591366666666667 < 1.6261111111111111 2010-Jan-07 18:56:37 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES33PP_p1_093) < 013734 THEN' 2010-Jan-07 18:56:37 COMMAND run_command_line: EXECUTING command 40: 'FIXEDDRIFT az=166.87 alfaangle=31.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_093 ra=12400.00 dec=302200.00' 2010-Jan-07 18:56:37 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=166.87 alfaangle=31.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p1_093 ra=12400.00 dec=302200.00' in non-true conditional branch 2010-Jan-07 18:56:37 COMMAND run_command_line: EXECUTING command 43: 'ENDIF' 2010-Jan-07 18:56:37 COMMAND run_command_line: EXECUTING command 46: 'IF LSTSLEW(AGES2082_p3_070) < 021235 THEN' 2010-Jan-07 18:56:38 LOG3 is_if_valid: Current source data: up 238.6 13.9 UP - - 132 3.5 2010-Jan-07 18:56:38 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES2082_p3_070) < 021235 2010-Jan-07 18:56:38 INFO5 is_if_valid: Condition parsed as: 1.7108033333333335 < 2.2097222222222226 2010-Jan-07 18:56:38 COMMAND run_command_line: EXECUTING command 47: 'FIXEDDRIFT az=212.25 alfaangle=-10.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_070 ra=23100.00 dec=250430.00' 2010-Jan-07 18:56:38 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-Jan-07 18:56:38 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-07 18:56:38 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 600 212.25 -10.9 hcorcal 5 tracking no off lcorcal first 1 AGES2082_p3_070 23100.00 250430.00 J 8500.0 Heliocentric velocity(optical)' 2010-Jan-07 18:56:38 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-Jan-07 18:56:38 LOG5 begin_task: Level: (2) ID = <10228> Status = 0 0 0 0 ok 2010-Jan-07 18:56:38 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'galfasrc' 2010-Jan-07 18:56:38 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-Jan-07 18:56:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES2082_p3_070} 2010-Jan-07 18:56:38 INFO3 fixed_driftmap: Sending telescope to Az = 212.25 and ZA = 8.08 2010-Jan-07 18:56:38 LOG3 track_source: Calling 'track_source AGES2082_p3_070 212.25 8.0780437471 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-Jan-07 18:56:38 START begin_task: Starting task 'sending tracking commands' 2010-Jan-07 18:56:38 LOG5 begin_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2010-Jan-07 18:56:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES2082_p3_070} INFO {Slewing to source 'AGES2082_p3_070' ...} 2010-Jan-07 18:56:38 INFO1 track_source: Starting to track AGES2082_p3_070 2010-Jan-07 18:56:38 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES2082_p3_070" 2010-Jan-07 18:56:38 LOG3 vw_send: To DATATAKING: set ra 212.25 2010-Jan-07 18:56:38 LOG3 vw_send: To DATATAKING: set dec 8.0780437471 2010-Jan-07 18:56:38 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-07 18:56:38 LOG3 vw_send: To DATATAKING: pnt tr 212.25 8.0780437471 -CF 2010-Jan-07 18:56:38 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 18:56:38 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-07 18:56:38 LOG5 finish_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2010-Jan-07 18:56:38 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-07 18:56:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 18:56:38 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-07 18:56:38 LOG5 end_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2010-Jan-07 18:56:38 START begin_task: Starting task 'rotate ALFA to -10.9 degrees' 2010-Jan-07 18:56:38 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2010-Jan-07 18:56:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -10.9 degrees ...} 2010-Jan-07 18:56:38 INFO2 rotate_alfa: ALFA commanded to -10.9 degrees 2010-Jan-07 18:56:38 LOG3 sock_errsend: To ALFAMOTOR: POSITION -10.9 REPLY 2010-Jan-07 18:56:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Jan-07 18:56:39 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Jan-07 18:56:39 LOG5 begin_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2010-Jan-07 18:56:39 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES2082_p3_070" 2010-Jan-07 18:56:39 LOG4 got_cormsg: From DATATAKING: set ra 212.25 2010-Jan-07 18:56:39 LOG4 got_cormsg: From DATATAKING: set dec 8.0780437471 2010-Jan-07 18:56:39 LOG4 got_cormsg: From DATATAKING: vw% 212.25 2010-Jan-07 18:56:39 LOG4 got_cormsg: From DATATAKING: vw% 8.0780437471 2010-Jan-07 18:56:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:56:39 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-07 18:56:39 LOG4 got_cormsg: From DATATAKING: pnt tr 212.25 8.0780437471 -CF 2010-Jan-07 18:56:39 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 18:56:39 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Jan-07 18:56:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:56:56 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Jan-07 18:56:56 INFO3 alfa_motor: ALFA rotator in-position -10.90 degrees 2010-Jan-07 18:56:56 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Jan-07 18:56:56 LOG5 end_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2010-Jan-07 18:56:56 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-07 18:56:56 STOP finish_task: Finishing task 'rotate ALFA to -10.9 degrees' 2010-Jan-07 18:56:56 LOG5 finish_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2010-Jan-07 18:56:56 INFO2 finish_task: DONE finished configuration: rotating ALFA to -10.9 degrees 2010-Jan-07 18:56:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 18:56:56 STOP end_task: Finishing task 'rotate ALFA to -10.9 degrees' with status 'OK' 2010-Jan-07 18:56:56 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2010-Jan-07 18:56:56 START begin_task: Starting task 'waiting on telescope' 2010-Jan-07 18:56:56 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2010-Jan-07 18:56:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Jan-07 18:56:56 LOG3 waittrk: Start waittrk 5 2010-Jan-07 18:56:56 START begin_task: Starting task 'waiting on telescope movement' 2010-Jan-07 18:56:56 LOG5 begin_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2010-Jan-07 18:57:01 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Jan-07 18:57:01 LOG5 end_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2010-Jan-07 18:57:01 START begin_task: Starting task 'waiting on telescope on source' 2010-Jan-07 18:57:01 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2010-Jan-07 18:59:09 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Jan-07 18:59:09 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2010-Jan-07 18:59:09 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-07 18:59:09 INFO2 waittrk: Now tracking AGES2082_p3_070 2010-Jan-07 18:59:09 LOG4 waittrk: Current telescope position: Az = 211.87 ZA = 8.09 2010-Jan-07 18:59:09 STOP finish_task: Finishing task 'waiting on telescope' 2010-Jan-07 18:59:09 LOG5 finish_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2010-Jan-07 18:59:09 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Jan-07 18:59:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 18:59:09 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Jan-07 18:59:09 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2010-Jan-07 18:59:09 START begin_task: Starting task 'selecting calibration type' 2010-Jan-07 18:59:09 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2010-Jan-07 18:59:09 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-07 18:59:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-07 18:59:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:59:09 START begin_task: Starting task 'waiting on setcal' 2010-Jan-07 18:59:09 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2010-Jan-07 18:59:09 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-07 18:59:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 18:59:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:59:09 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 18:59:09 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-07 18:59:09 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2010-Jan-07 18:59:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-07 18:59:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 18:59:09 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-07 18:59:09 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 18:59:09 LOG5 begin_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2010-Jan-07 18:59:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 18:59:10 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 18:59:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 18:59:10 LOG5 end_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2010-Jan-07 18:59:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 18:59:10 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-07 18:59:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 18:59:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-07 18:59:10 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 18:59:10 LOG5 begin_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2010-Jan-07 18:59:10 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 18:59:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 18:59:10 LOG5 end_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2010-Jan-07 18:59:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 18:59:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-07 18:59:10 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-07 18:59:10 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2010-Jan-07 18:59:10 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2010-Jan-07 18:59:10 INFO2 astwait: Waiting for 1787 seconds from 22:59:10 to 23:28:57 UTC ... 2010-Jan-07 18:59:10 LOG4 send_obs_status: To obs_status: <1> TASKTIME 1787 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Jan-07 18:59:10 START begin_task: Starting task 'waiting on waiting for AST time' 2010-Jan-07 18:59:10 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2010-Jan-07 19:11:25 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 19:11:25.311 (seconds: 69085.311)!} 2010-Jan-07 19:11:25 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 19:11:25.311 (seconds: 69085.311)! 2010-Jan-07 19:26:24 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 19:26:24.301 (seconds: 69984.301)!} 2010-Jan-07 19:26:24 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 19:26:24.301 (seconds: 69984.301)! 2010-Jan-07 19:28:57 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2010-Jan-07 19:28:57 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2010-Jan-07 19:28:57 INFO3 astwait: Finished waiting 2010-Jan-07 19:28:57 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Jan-07 19:28:57 LOG5 dopset_later: Calling 'dopset_later 60.754577650626032' 2010-Jan-07 19:28:57 INFO3 dopset_later: Setting Doppler correction for 19:29:57 (60.8 seconds from now) 2010-Jan-07 19:28:57 LOG5 antvel: Calling 'antvel 212.250000 8.078044 F Heliocentric 60.754577650626032' 2010-Jan-07 19:28:57 LOG2 antvel: Transforming current Az = 212.25 ZA = 8.08 to apparent RA = 02:31:36.1 Dec = +25:07:21.5 2010-Jan-07 19:28:57 LOG2 antvel: Parameters to Doppler: Heliocentric 84597 2010 7 0.0 2010-Jan-07 19:28:57 INFO5 antvel: Computed antenna velocity: +26.78255 km/s 2010-Jan-07 19:28:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=26.782554923599999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-Jan-07 19:28:57 INFO4 dopset_gen: New sky frequencies: 1381.120043 1381.120043 1381.120043 1381.120043 1381.120043 1381.120043 1381.120043 1381.120043 1381.120043 2010-Jan-07 19:28:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.120043 sky0=1381.120043 sky1=1381.120043 sky2=1381.120043 sky3=1381.120043 sky4=1381.120043 sky5=1381.120043 sky6=1381.120043 sky7=1381.120043 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 19:28:57 LOG2 dopset_gen: Result from 'sky2syn': 1631.120043 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 19:28:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631120043.0} 2010-Jan-07 19:28:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 19:28:57 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2010-Jan-07 19:28:57 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2010-Jan-07 19:28:57 INFO5 fixed_driftmap: Tracking J2000 position: RA = 02:30:03.7 Dec = +25:04:42.3 2010-Jan-07 19:28:57 LOG3 track_source: Calling 'track_source AGES2082_p3_070 023003.7 250442.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-Jan-07 19:28:57 START begin_task: Starting task 'sending tracking commands' 2010-Jan-07 19:28:57 LOG5 begin_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2010-Jan-07 19:28:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES2082_p3_070} INFO {Slewing to source 'AGES2082_p3_070' ...} 2010-Jan-07 19:28:57 INFO1 track_source: Starting to track AGES2082_p3_070 2010-Jan-07 19:28:57 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES2082_p3_070" 2010-Jan-07 19:28:57 LOG3 vw_send: To DATATAKING: set ra 023003.7 2010-Jan-07 19:28:57 LOG3 vw_send: To DATATAKING: set dec 250442.3 2010-Jan-07 19:28:57 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-07 19:28:57 LOG3 vw_send: To DATATAKING: pnt tr 023003.7 250442.3 -CJ 2010-Jan-07 19:28:57 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 19:28:57 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-07 19:28:57 LOG5 finish_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2010-Jan-07 19:28:57 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-07 19:28:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 19:28:57 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-07 19:28:57 LOG5 end_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2010-Jan-07 19:28:57 START begin_task: Starting task 'waiting on telescope' 2010-Jan-07 19:28:57 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2010-Jan-07 19:28:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Jan-07 19:28:57 LOG3 waittrk: Start waittrk 5 2010-Jan-07 19:28:57 START begin_task: Starting task 'waiting on telescope movement' 2010-Jan-07 19:28:57 LOG5 begin_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2010-Jan-07 19:28:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631120043.0} 2010-Jan-07 19:28:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 19:28:57 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES2082_p3_070" 2010-Jan-07 19:28:57 LOG4 got_cormsg: From DATATAKING: set ra 023003.7 2010-Jan-07 19:28:57 LOG4 got_cormsg: From DATATAKING: set dec 250442.3 2010-Jan-07 19:28:57 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-07 19:28:57 LOG4 got_cormsg: From DATATAKING: pnt tr 023003.7 250442.3 -CJ 2010-Jan-07 19:28:57 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 19:28:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 19:28:58 LOG4 got_cormsg: From DATATAKING: vw% vw% 023003.7 2010-Jan-07 19:28:58 LOG4 got_cormsg: From DATATAKING: vw% 250442.3 2010-Jan-07 19:28:58 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2010-Jan-07 19:29:02 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Jan-07 19:29:02 LOG5 end_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2010-Jan-07 19:29:02 START begin_task: Starting task 'waiting on telescope on source' 2010-Jan-07 19:29:02 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2010-Jan-07 19:29:05 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Jan-07 19:29:05 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2010-Jan-07 19:29:05 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-07 19:29:05 INFO2 waittrk: Now tracking AGES2082_p3_070 2010-Jan-07 19:29:05 LOG4 waittrk: Current telescope position: Az = 211.73 ZA = 8.09 2010-Jan-07 19:29:05 STOP finish_task: Finishing task 'waiting on telescope' 2010-Jan-07 19:29:05 LOG5 finish_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2010-Jan-07 19:29:05 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Jan-07 19:29:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 19:29:05 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Jan-07 19:29:05 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2010-Jan-07 19:29:05 START begin_task: Starting task 'adjusting WAPP+Mock power' 2010-Jan-07 19:29:05 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2010-Jan-07 19:29:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2010-Jan-07 19:29:05 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2010-Jan-07 19:29:05 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Jan-07 19:29:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Jan-07 19:29:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 19:29:05 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Jan-07 19:29:05 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2010-Jan-07 19:29:05 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Jan-07 19:29:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 19:29:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 19:29:08 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 19:29:08 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Jan-07 19:29:08 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2010-Jan-07 19:29:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Jan-07 19:29:08 START begin_task: Starting task 'adjusting WAPP power' 2010-Jan-07 19:29:08 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2010-Jan-07 19:29:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Jan-07 19:29:09 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 19:29:09 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 19:29:09 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 19:29:09 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 19:29:09 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Jan-07 19:29:09 LOG5 begin_task: Level: (5) ID = <10247> Status = 0 0 0 0 ok 2010-Jan-07 19:29:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 19:29:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Jan-07 19:29:09 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 7 dB --- beam 1: 7 7 dB 2010-Jan-07 19:29:09 LOG5 wapp_failed: Calling 'wapp_failed 4' 2010-Jan-07 19:29:09 ERROR wapp_failed: ERROR WAPP-4 failed to complete its current task! 2010-Jan-07 19:29:09 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 4 abort' 2010-Jan-07 19:29:09 START begin_task: Starting task 'handling WAPP failure' 2010-Jan-07 19:29:09 LOG5 begin_task: Level: (6) ID = <10248> Status = 0 0 0 0 ok 2010-Jan-07 19:29:09 NOTE handle_wapp_failure: Will abort task 'running command file '100107.cmd'' since the WAPP failure preference is set to 'abort'! 2010-Jan-07 19:29:09 ALERT handle_wapp_failure: Aborting due to WAPP failure! 2010-Jan-07 19:29:09 LOG1 task_failed: Task 'handling WAPP failure' failed! 2010-Jan-07 19:29:09 LOG5 task_failed: Level: (6) ID = <10248> Status = 0 0 0 0 ok 2010-Jan-07 19:29:09 WARNING abort_task: WARNING abort requested! 2010-Jan-07 19:29:09 WARNING abort_task: WARNING Aborting handling WAPP failure 2010-Jan-07 19:29:09 WARNING abort_task: WARNING Aborting wait for handling WAPP failure 2010-Jan-07 19:29:09 STOP end_task: Finishing task 'handling WAPP failure' with status 'FAILED' 2010-Jan-07 19:29:09 LOG5 end_task: Level: (6) ID = <10248> Status = 1 0 0 1 failed 2010-Jan-07 19:29:09 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'FAILED' 2010-Jan-07 19:29:09 LOG5 end_task: Level: (5) ID = <10247> Status = 1 0 0 1 failed 2010-Jan-07 19:29:09 START begin_task: Starting task 'stopping the WAPPs' 2010-Jan-07 19:29:09 LOG5 begin_task: Level: (5) ID = <10249> Status = 1 0 0 1 failed 2010-Jan-07 19:29:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2010-Jan-07 19:29:09 INFO1 stop_wapp: Stopping the WAPPs 2010-Jan-07 19:29:09 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2010-Jan-07 19:29:09 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2010-Jan-07 19:29:09 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2010-Jan-07 19:29:09 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2010-Jan-07 19:29:09 START begin_task: Starting task 'waiting on stopping WAPPs' 2010-Jan-07 19:29:09 LOG5 begin_task: Level: (6) ID = <10250> Status = 1 0 0 1 failed 2010-Jan-07 19:29:09 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 5 dB 2010-Jan-07 19:29:09 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 2 3 dB --- beam 3: 4 4 dB 2010-Jan-07 19:29:09 ERROR WAPP=4-adjust_power: ERROR power adjustment failed! 2010-Jan-07 19:29:09 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'FAILED' 2010-Jan-07 19:29:09 LOG5 end_task: Level: (6) ID = <10250> Status = 1 0 0 1 failed 2010-Jan-07 19:29:09 STOP end_task: Finishing task 'stopping the WAPPs' with status 'FAILED' 2010-Jan-07 19:29:09 LOG5 end_task: Level: (5) ID = <10249> Status = 1 0 0 1 failed 2010-Jan-07 19:29:09 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Jan-07 19:29:09 LOG5 finish_task: Level: (4) ID = <10246> Status = 1 0 0 1 failed 2010-Jan-07 19:29:09 ERROR finish_task: ERROR failed adjusting: WAPP power 2010-Jan-07 19:29:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-Jan-07 19:29:09 STOP end_task: Finishing task 'adjusting WAPP power' with status 'FAILED' 2010-Jan-07 19:29:09 LOG5 end_task: Level: (4) ID = <10246> Status = 1 0 0 1 failed 2010-Jan-07 19:29:10 START begin_task: Starting task 'adjusting Mock spectrometer power' 2010-Jan-07 19:29:10 LOG5 begin_task: Level: (4) ID = <10251> Status = 1 0 0 1 failed 2010-Jan-07 19:29:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Jan-07 19:29:10 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2010-Jan-07 19:29:10 LOG5 finish_task: Level: (4) ID = <10251> Status = 1 0 0 1 failed 2010-Jan-07 19:29:10 ERROR finish_task: ERROR failed adjusting: Mock spectrometer power 2010-Jan-07 19:29:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-Jan-07 19:29:10 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'FAILED' 2010-Jan-07 19:29:10 LOG5 end_task: Level: (4) ID = <10251> Status = 1 0 0 1 failed 2010-Jan-07 19:29:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-07 19:29:10 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2010-Jan-07 19:29:10 LOG5 finish_task: Level: (3) ID = <10244> Status = 1 0 0 1 failed 2010-Jan-07 19:29:10 ERROR finish_task: ERROR failed adjusting: WAPP+Mock power levels 2010-Jan-07 19:29:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-Jan-07 19:29:10 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'FAILED' 2010-Jan-07 19:29:10 LOG5 end_task: Level: (3) ID = <10244> Status = 1 0 0 1 failed 2010-Jan-07 19:29:10 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-Jan-07 19:29:10 LOG5 finish_task: Level: (2) ID = <10228> Status = 1 0 0 1 failed 2010-Jan-07 19:29:10 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2010-Jan-07 19:29:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Jan-07 19:29:10 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2010-Jan-07 19:29:10 LOG5 end_task: Level: (2) ID = <10228> Status = 1 0 0 1 failed 2010-Jan-07 19:29:10 ALERT run_command_file: Stopping command file processing at line 47! 2010-Jan-07 19:29:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Jan-07 19:29:10 STOP finish_task: Finishing task 'running command file '100107.cmd'' 2010-Jan-07 19:29:10 LOG5 finish_task: Level: (1) ID = <10211> Status = 1 0 0 1 failed 2010-Jan-07 19:29:10 ERROR finish_task: ERROR failed running: command file '100107.cmd' 2010-Jan-07 19:29:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Jan-07 19:29:10 END end_task: Finishing task 'running command file '100107.cmd'' with status 'FAILED' 2010-Jan-07 19:29:10 LOG5 end_task: Level: (1) ID = <10211> Status = 1 0 0 1 failed 2010-Jan-07 19:29:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2010-Jan-07 19:29:10 INFO1 WAPP=1+2+3-adjust_power: DONE adjusting power 2010-Jan-07 19:29:10 INFO1 WAPP=1+4-wappcon: Can't abort --- the WAPP isn't running 2010-Jan-07 19:29:10 INFO1 WAPP=2+3-wappcon: Can't abort --- the WAPP isn't running 2010-Jan-07 19:29:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.000 < 0.75)! 2010-Jan-07 19:29:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 0.898 0.953 0.961 2010-Jan-07 19:29:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 1.049 1.079 0.912 2010-Jan-07 19:29:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.074 1.089 1.067 1.013 2010-Jan-07 19:29:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 0.000 0.000 0.000 2010-Jan-07 19:29:31 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-Jan-07 19:29:31 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-Jan-07 19:29:31 LOG5 restart_wapp: Calling 'restart_wapp' 2010-Jan-07 19:29:31 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-Jan-07 19:29:31 LOG5 begin_task: Level: (1) ID = <10252> Status = 0 0 0 0 ok 2010-Jan-07 19:29:31 NOTE restart_wapp: Restarting all WAPPs 2010-Jan-07 19:29:31 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-Jan-07 19:29:31 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-Jan-07 19:29:31 LOG5 end_task: Level: (1) ID = <10252> Status = 0 0 0 0 ok 2010-Jan-07 19:29:31 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Jan-07 19:29:31 LOG3 exec_msg: Closing socket 2010-Jan-07 19:29:31 LOG3 exec_msg: Closing socket 2010-Jan-07 19:29:31 LOG3 exec_msg: Closing socket 2010-Jan-07 19:29:31 LOG3 exec_msg: Closing socket 2010-Jan-07 19:29:34 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-Jan-07 19:29:34 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-Jan-07 19:29:34 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-Jan-07 19:29:34 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-Jan-07 19:30:00 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Jan-07 19:30:00 LOG4 exec_msg: From OBSERVER: run_command_file 100107.cmd 50 1 40 2010-Jan-07 19:30:00 LOG4 run_command_file: Calling 'run_command_file 100107.cmd 50 1 40' 2010-Jan-07 19:30:00 BEGIN begin_task: Starting task 'running command file '100107.cmd'' 2010-Jan-07 19:30:00 LOG5 begin_task: Level: (1) ID = <10253> Status = 0 0 0 0 ok 2010-Jan-07 19:30:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100107.cmd' ...} 2010-Jan-07 19:30:00 NOTE run_command_file: Starting execution of command file '100107.cmd' from line 50 2010-Jan-07 19:30:00 COMMAND run_command_line: EXECUTING command 50: 'ENDIF' 2010-Jan-07 19:30:00 ERROR run_command_line: ERROR found an 'ENDIF' without matching 'IF'! 2010-Jan-07 19:30:00 LOG1 task_failed: Task 'running command file '100107.cmd'' failed! 2010-Jan-07 19:30:00 LOG5 task_failed: Level: (1) ID = <10253> Status = 0 0 0 0 ok 2010-Jan-07 19:30:00 ALERT run_command_file: Stopping command file processing at line 50! 2010-Jan-07 19:30:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Jan-07 19:30:00 STOP finish_task: Finishing task 'running command file '100107.cmd'' 2010-Jan-07 19:30:00 LOG5 finish_task: Level: (1) ID = <10253> Status = 0 0 0 1 failed 2010-Jan-07 19:30:00 ERROR finish_task: ERROR failed running: command file '100107.cmd' 2010-Jan-07 19:30:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Jan-07 19:30:00 END end_task: Finishing task 'running command file '100107.cmd'' with status 'FAILED' 2010-Jan-07 19:30:00 LOG5 end_task: Level: (1) ID = <10253> Status = 0 0 0 1 failed 2010-Jan-07 19:30:22 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Jan-07 19:30:22 LOG4 exec_msg: From OBSERVER: run_command_file 100107.cmd 51 1 40 2010-Jan-07 19:30:22 LOG4 run_command_file: Calling 'run_command_file 100107.cmd 51 1 40' 2010-Jan-07 19:30:22 BEGIN begin_task: Starting task 'running command file '100107.cmd'' 2010-Jan-07 19:30:22 LOG5 begin_task: Level: (1) ID = <10254> Status = 0 0 0 0 ok 2010-Jan-07 19:30:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100107.cmd' ...} 2010-Jan-07 19:30:22 NOTE run_command_file: Starting execution of command file '100107.cmd' from line 51 2010-Jan-07 19:30:22 COMMAND run_command_line: EXECUTING command 53: 'IF LSTSLEW(AGES2082_p3_072) < 022505 THEN' 2010-Jan-07 19:30:23 LOG3 is_if_valid: Current source data: up 211.9 8.0 UP - - 98 0.1 2010-Jan-07 19:30:23 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES2082_p3_072) < 022505 2010-Jan-07 19:30:23 INFO5 is_if_valid: Condition parsed as: 2.2187336666666666 < 2.4180555555555556 2010-Jan-07 19:30:23 COMMAND run_command_line: EXECUTING command 54: 'FIXEDDRIFT az=192.37 alfaangle=8.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_072 ra=23100.00 dec=250130.00' 2010-Jan-07 19:30:23 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-Jan-07 19:30:23 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-07 19:30:23 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 600 192.37 8.0 hcorcal 5 tracking no off lcorcal first 1 AGES2082_p3_072 23100.00 250130.00 J 8500.0 Heliocentric velocity(optical)' 2010-Jan-07 19:30:23 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-Jan-07 19:30:23 LOG5 begin_task: Level: (2) ID = <10255> Status = 0 0 0 0 ok 2010-Jan-07 19:30:23 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES2082_p3_070' 2010-Jan-07 19:30:23 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-Jan-07 19:30:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES2082_p3_072} 2010-Jan-07 19:30:23 INFO3 fixed_driftmap: Sending telescope to Az = 192.37 and ZA = 6.89 2010-Jan-07 19:30:23 LOG3 track_source: Calling 'track_source AGES2082_p3_072 192.37 6.8860545099 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-Jan-07 19:30:23 START begin_task: Starting task 'sending tracking commands' 2010-Jan-07 19:30:23 LOG5 begin_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2010-Jan-07 19:30:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES2082_p3_072} INFO {Slewing to source 'AGES2082_p3_072' ...} 2010-Jan-07 19:30:23 INFO1 track_source: Starting to track AGES2082_p3_072 2010-Jan-07 19:30:23 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES2082_p3_072" 2010-Jan-07 19:30:23 LOG3 vw_send: To DATATAKING: set ra 192.37 2010-Jan-07 19:30:23 LOG3 vw_send: To DATATAKING: set dec 6.8860545099 2010-Jan-07 19:30:23 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-07 19:30:23 LOG3 vw_send: To DATATAKING: pnt tr 192.37 6.8860545099 -CF 2010-Jan-07 19:30:24 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 19:30:24 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-07 19:30:24 LOG5 finish_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2010-Jan-07 19:30:24 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-07 19:30:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 19:30:24 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-07 19:30:24 LOG5 end_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2010-Jan-07 19:30:24 START begin_task: Starting task 'rotate ALFA to +8 degrees' 2010-Jan-07 19:30:24 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2010-Jan-07 19:30:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +8 degrees ...} 2010-Jan-07 19:30:24 INFO2 rotate_alfa: ALFA commanded to +8.0 degrees 2010-Jan-07 19:30:24 LOG3 sock_errsend: To ALFAMOTOR: POSITION 8.0 REPLY 2010-Jan-07 19:30:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Jan-07 19:30:24 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Jan-07 19:30:24 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2010-Jan-07 19:30:24 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES2082_p3_072" 2010-Jan-07 19:30:24 LOG4 got_cormsg: From DATATAKING: set ra 192.37 2010-Jan-07 19:30:24 LOG4 got_cormsg: From DATATAKING: set dec 6.8860545099 2010-Jan-07 19:30:24 LOG4 got_cormsg: From DATATAKING: vw% 192.37 2010-Jan-07 19:30:24 LOG4 got_cormsg: From DATATAKING: vw% 6.8860545099 2010-Jan-07 19:30:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 19:30:24 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-07 19:30:24 LOG4 got_cormsg: From DATATAKING: pnt tr 192.37 6.8860545099 -CF 2010-Jan-07 19:30:24 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 19:30:24 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Jan-07 19:30:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 19:30:35 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Jan-07 19:30:35 INFO3 alfa_motor: ALFA rotator in-position +8.00 degrees 2010-Jan-07 19:30:35 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Jan-07 19:30:35 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2010-Jan-07 19:30:35 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-07 19:30:35 STOP finish_task: Finishing task 'rotate ALFA to +8 degrees' 2010-Jan-07 19:30:35 LOG5 finish_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2010-Jan-07 19:30:35 INFO2 finish_task: DONE finished configuration: rotating ALFA to +8 degrees 2010-Jan-07 19:30:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 19:30:35 STOP end_task: Finishing task 'rotate ALFA to +8 degrees' with status 'OK' 2010-Jan-07 19:30:35 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2010-Jan-07 19:30:35 START begin_task: Starting task 'waiting on telescope' 2010-Jan-07 19:30:35 LOG5 begin_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2010-Jan-07 19:30:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Jan-07 19:30:35 LOG3 waittrk: Start waittrk 5 2010-Jan-07 19:30:35 START begin_task: Starting task 'waiting on telescope movement' 2010-Jan-07 19:30:35 LOG5 begin_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2010-Jan-07 19:30:40 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Jan-07 19:30:40 LOG5 end_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2010-Jan-07 19:30:41 START begin_task: Starting task 'waiting on telescope on source' 2010-Jan-07 19:30:41 LOG5 begin_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2010-Jan-07 19:31:21 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Jan-07 19:31:21 LOG5 end_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2010-Jan-07 19:31:21 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-07 19:31:21 INFO2 waittrk: Now tracking AGES2082_p3_072 2010-Jan-07 19:31:21 LOG4 waittrk: Current telescope position: Az = 192.09 ZA = 6.91 2010-Jan-07 19:31:21 STOP finish_task: Finishing task 'waiting on telescope' 2010-Jan-07 19:31:21 LOG5 finish_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2010-Jan-07 19:31:21 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Jan-07 19:31:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 19:31:21 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Jan-07 19:31:21 LOG5 end_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2010-Jan-07 19:31:21 START begin_task: Starting task 'selecting calibration type' 2010-Jan-07 19:31:21 LOG5 begin_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2010-Jan-07 19:31:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-07 19:31:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-07 19:31:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 19:31:21 START begin_task: Starting task 'waiting on setcal' 2010-Jan-07 19:31:21 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2010-Jan-07 19:31:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-07 19:31:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 19:31:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 19:31:21 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 19:31:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-07 19:31:21 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2010-Jan-07 19:31:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-07 19:31:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 19:31:21 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-07 19:31:21 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 19:31:21 LOG5 begin_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2010-Jan-07 19:31:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 19:31:22 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 19:31:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 19:31:22 LOG5 end_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2010-Jan-07 19:31:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 19:31:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-07 19:31:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 19:31:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-07 19:31:22 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 19:31:22 LOG5 begin_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2010-Jan-07 19:31:22 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 19:31:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 19:31:22 LOG5 end_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2010-Jan-07 19:31:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 19:31:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-07 19:31:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-07 19:31:22 LOG5 end_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2010-Jan-07 19:31:22 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2010-Jan-07 19:31:22 INFO2 astwait: Waiting for 603 seconds from 23:31:22 to 23:41:25 UTC ... 2010-Jan-07 19:31:22 LOG4 send_obs_status: To obs_status: <1> TASKTIME 603 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Jan-07 19:31:22 START begin_task: Starting task 'waiting on waiting for AST time' 2010-Jan-07 19:31:22 LOG5 begin_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2010-Jan-07 19:41:25 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2010-Jan-07 19:41:25 LOG5 end_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2010-Jan-07 19:41:25 INFO3 astwait: Finished waiting 2010-Jan-07 19:41:25 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Jan-07 19:41:25 LOG5 dopset_later: Calling 'dopset_later 60.864943083811788' 2010-Jan-07 19:41:25 INFO3 dopset_later: Setting Doppler correction for 19:42:25 (60.9 seconds from now) 2010-Jan-07 19:41:25 LOG5 antvel: Calling 'antvel 192.370000 6.886055 F Heliocentric 60.864943083811788' 2010-Jan-07 19:41:25 LOG2 antvel: Transforming current Az = 192.37 ZA = 6.89 to apparent RA = 02:31:36.1 Dec = +25:04:21.5 2010-Jan-07 19:41:25 LOG2 antvel: Parameters to Doppler: Heliocentric 85345 2010 7 0.0 2010-Jan-07 19:41:25 INFO5 antvel: Computed antenna velocity: +26.81381 km/s 2010-Jan-07 19:41:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=26.813812351799999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-Jan-07 19:41:25 INFO4 dopset_gen: New sky frequencies: 1381.119899 1381.119899 1381.119899 1381.119899 1381.119899 1381.119899 1381.119899 1381.119899 1381.119899 2010-Jan-07 19:41:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.119899 sky0=1381.119899 sky1=1381.119899 sky2=1381.119899 sky3=1381.119899 sky4=1381.119899 sky5=1381.119899 sky6=1381.119899 sky7=1381.119899 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 19:41:25 LOG2 dopset_gen: Result from 'sky2syn': 1631.119899 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 19:41:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631119899.0} 2010-Jan-07 19:41:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 19:41:25 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2010-Jan-07 19:41:25 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2010-Jan-07 19:41:25 INFO5 fixed_driftmap: Tracking J2000 position: RA = 02:30:03.6 Dec = +25:01:42.3 2010-Jan-07 19:41:25 LOG3 track_source: Calling 'track_source AGES2082_p3_072 023003.6 250142.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-Jan-07 19:41:25 START begin_task: Starting task 'sending tracking commands' 2010-Jan-07 19:41:25 LOG5 begin_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2010-Jan-07 19:41:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES2082_p3_072} INFO {Slewing to source 'AGES2082_p3_072' ...} 2010-Jan-07 19:41:25 INFO1 track_source: Starting to track AGES2082_p3_072 2010-Jan-07 19:41:25 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES2082_p3_072" 2010-Jan-07 19:41:25 LOG3 vw_send: To DATATAKING: set ra 023003.6 2010-Jan-07 19:41:25 LOG3 vw_send: To DATATAKING: set dec 250142.3 2010-Jan-07 19:41:25 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-07 19:41:25 LOG3 vw_send: To DATATAKING: pnt tr 023003.6 250142.3 -CJ 2010-Jan-07 19:41:25 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 19:41:25 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-07 19:41:25 LOG5 finish_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2010-Jan-07 19:41:25 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-07 19:41:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 19:41:25 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-07 19:41:25 LOG5 end_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2010-Jan-07 19:41:25 START begin_task: Starting task 'waiting on telescope' 2010-Jan-07 19:41:25 LOG5 begin_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2010-Jan-07 19:41:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Jan-07 19:41:25 LOG3 waittrk: Start waittrk 5 2010-Jan-07 19:41:25 START begin_task: Starting task 'waiting on telescope movement' 2010-Jan-07 19:41:25 LOG5 begin_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2010-Jan-07 19:41:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631119899.0} 2010-Jan-07 19:41:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 19:41:25 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES2082_p3_072" 2010-Jan-07 19:41:25 LOG4 got_cormsg: From DATATAKING: set ra 023003.6 2010-Jan-07 19:41:25 LOG4 got_cormsg: From DATATAKING: set dec 250142.3 2010-Jan-07 19:41:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Jan-07 19:41:25 LOG4 got_cormsg: From DATATAKING: vw% 023003.6 2010-Jan-07 19:41:25 LOG4 got_cormsg: From DATATAKING: vw% 250142.3 2010-Jan-07 19:41:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 19:41:25 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-07 19:41:25 LOG4 got_cormsg: From DATATAKING: pnt tr 023003.6 250142.3 -CJ 2010-Jan-07 19:41:25 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 19:41:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Jan-07 19:41:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 19:41:30 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Jan-07 19:41:30 LOG5 end_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2010-Jan-07 19:41:30 START begin_task: Starting task 'waiting on telescope on source' 2010-Jan-07 19:41:30 LOG5 begin_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2010-Jan-07 19:41:32 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Jan-07 19:41:32 LOG5 end_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2010-Jan-07 19:41:32 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-07 19:41:32 INFO2 waittrk: Now tracking AGES2082_p3_072 2010-Jan-07 19:41:32 LOG4 waittrk: Current telescope position: Az = 191.95 ZA = 6.91 2010-Jan-07 19:41:32 STOP finish_task: Finishing task 'waiting on telescope' 2010-Jan-07 19:41:32 LOG5 finish_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2010-Jan-07 19:41:32 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Jan-07 19:41:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 19:41:32 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Jan-07 19:41:32 LOG5 end_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2010-Jan-07 19:41:32 START begin_task: Starting task 'adjusting WAPP+Mock power' 2010-Jan-07 19:41:32 LOG5 begin_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2010-Jan-07 19:41:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2010-Jan-07 19:41:32 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2010-Jan-07 19:41:32 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Jan-07 19:41:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Jan-07 19:41:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 19:41:33 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Jan-07 19:41:33 LOG5 begin_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2010-Jan-07 19:41:33 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Jan-07 19:41:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 19:41:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 19:41:35 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 19:41:35 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Jan-07 19:41:35 LOG5 end_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2010-Jan-07 19:41:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Jan-07 19:41:35 START begin_task: Starting task 'adjusting WAPP power' 2010-Jan-07 19:41:35 LOG5 begin_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2010-Jan-07 19:41:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Jan-07 19:41:35 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 19:41:35 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 19:41:35 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 19:41:35 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 19:41:36 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Jan-07 19:41:36 LOG5 begin_task: Level: (5) ID = <10274> Status = 0 0 0 0 ok 2010-Jan-07 19:41:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Jan-07 19:41:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 19:41:36 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 7 dB 2010-Jan-07 19:41:36 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 5 dB 2010-Jan-07 19:41:36 LOG5 wapp_failed: Calling 'wapp_failed 4' 2010-Jan-07 19:41:36 ERROR wapp_failed: ERROR WAPP-4 failed to complete its current task! 2010-Jan-07 19:41:36 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 4 abort' 2010-Jan-07 19:41:36 START begin_task: Starting task 'handling WAPP failure' 2010-Jan-07 19:41:36 LOG5 begin_task: Level: (6) ID = <10275> Status = 0 0 0 0 ok 2010-Jan-07 19:41:36 NOTE handle_wapp_failure: Will abort task 'running command file '100107.cmd'' since the WAPP failure preference is set to 'abort'! 2010-Jan-07 19:41:36 ALERT handle_wapp_failure: Aborting due to WAPP failure! 2010-Jan-07 19:41:36 LOG1 task_failed: Task 'handling WAPP failure' failed! 2010-Jan-07 19:41:36 LOG5 task_failed: Level: (6) ID = <10275> Status = 0 0 0 0 ok 2010-Jan-07 19:41:36 WARNING abort_task: WARNING abort requested! 2010-Jan-07 19:41:36 WARNING abort_task: WARNING Aborting handling WAPP failure 2010-Jan-07 19:41:36 WARNING abort_task: WARNING Aborting wait for handling WAPP failure 2010-Jan-07 19:41:36 STOP end_task: Finishing task 'handling WAPP failure' with status 'FAILED' 2010-Jan-07 19:41:36 LOG5 end_task: Level: (6) ID = <10275> Status = 1 0 0 1 failed 2010-Jan-07 19:41:36 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'FAILED' 2010-Jan-07 19:41:36 LOG5 end_task: Level: (5) ID = <10274> Status = 1 0 0 1 failed 2010-Jan-07 19:41:36 START begin_task: Starting task 'stopping the WAPPs' 2010-Jan-07 19:41:36 LOG5 begin_task: Level: (5) ID = <10276> Status = 1 0 0 1 failed 2010-Jan-07 19:41:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2010-Jan-07 19:41:36 INFO1 stop_wapp: Stopping the WAPPs 2010-Jan-07 19:41:36 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2010-Jan-07 19:41:36 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2010-Jan-07 19:41:36 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2010-Jan-07 19:41:36 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2010-Jan-07 19:41:36 START begin_task: Starting task 'waiting on stopping WAPPs' 2010-Jan-07 19:41:36 LOG5 begin_task: Level: (6) ID = <10277> Status = 1 0 0 1 failed 2010-Jan-07 19:41:36 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 2 3 dB --- beam 3: 4 4 dB 2010-Jan-07 19:41:36 ERROR WAPP=4-adjust_power: ERROR power adjustment failed! 2010-Jan-07 19:41:36 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'FAILED' 2010-Jan-07 19:41:36 LOG5 end_task: Level: (6) ID = <10277> Status = 1 0 0 1 failed 2010-Jan-07 19:41:36 STOP end_task: Finishing task 'stopping the WAPPs' with status 'FAILED' 2010-Jan-07 19:41:36 LOG5 end_task: Level: (5) ID = <10276> Status = 1 0 0 1 failed 2010-Jan-07 19:41:36 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Jan-07 19:41:36 LOG5 finish_task: Level: (4) ID = <10273> Status = 1 0 0 1 failed 2010-Jan-07 19:41:36 ERROR finish_task: ERROR failed adjusting: WAPP power 2010-Jan-07 19:41:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-Jan-07 19:41:36 STOP end_task: Finishing task 'adjusting WAPP power' with status 'FAILED' 2010-Jan-07 19:41:36 LOG5 end_task: Level: (4) ID = <10273> Status = 1 0 0 1 failed 2010-Jan-07 19:41:36 START begin_task: Starting task 'adjusting Mock spectrometer power' 2010-Jan-07 19:41:36 LOG5 begin_task: Level: (4) ID = <10278> Status = 1 0 0 1 failed 2010-Jan-07 19:41:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Jan-07 19:41:36 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2010-Jan-07 19:41:36 LOG5 finish_task: Level: (4) ID = <10278> Status = 1 0 0 1 failed 2010-Jan-07 19:41:36 ERROR finish_task: ERROR failed adjusting: Mock spectrometer power 2010-Jan-07 19:41:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-Jan-07 19:41:36 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'FAILED' 2010-Jan-07 19:41:36 LOG5 end_task: Level: (4) ID = <10278> Status = 1 0 0 1 failed 2010-Jan-07 19:41:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-07 19:41:37 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2010-Jan-07 19:41:37 LOG5 finish_task: Level: (3) ID = <10271> Status = 1 0 0 1 failed 2010-Jan-07 19:41:37 ERROR finish_task: ERROR failed adjusting: WAPP+Mock power levels 2010-Jan-07 19:41:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-Jan-07 19:41:37 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'FAILED' 2010-Jan-07 19:41:37 LOG5 end_task: Level: (3) ID = <10271> Status = 1 0 0 1 failed 2010-Jan-07 19:41:37 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-Jan-07 19:41:37 LOG5 finish_task: Level: (2) ID = <10255> Status = 1 0 0 1 failed 2010-Jan-07 19:41:37 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2010-Jan-07 19:41:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Jan-07 19:41:37 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2010-Jan-07 19:41:37 LOG5 end_task: Level: (2) ID = <10255> Status = 1 0 0 1 failed 2010-Jan-07 19:41:37 ALERT run_command_file: Stopping command file processing at line 54! 2010-Jan-07 19:41:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Jan-07 19:41:37 STOP finish_task: Finishing task 'running command file '100107.cmd'' 2010-Jan-07 19:41:37 LOG5 finish_task: Level: (1) ID = <10254> Status = 1 0 0 1 failed 2010-Jan-07 19:41:37 ERROR finish_task: ERROR failed running: command file '100107.cmd' 2010-Jan-07 19:41:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Jan-07 19:41:37 END end_task: Finishing task 'running command file '100107.cmd'' with status 'FAILED' 2010-Jan-07 19:41:37 LOG5 end_task: Level: (1) ID = <10254> Status = 1 0 0 1 failed 2010-Jan-07 19:41:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2010-Jan-07 19:41:37 INFO1 WAPP=1+2+3-adjust_power: DONE adjusting power 2010-Jan-07 19:41:37 INFO1 WAPP=1+4-wappcon: Can't abort --- the WAPP isn't running 2010-Jan-07 19:41:37 INFO1 WAPP=2+3-wappcon: Can't abort --- the WAPP isn't running 2010-Jan-07 19:41:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.000 < 0.75)! 2010-Jan-07 19:41:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.011 1.111 0.935 0.949 2010-Jan-07 19:41:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.967 1.036 1.074 0.909 2010-Jan-07 19:41:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.069 1.097 1.060 1.011 2010-Jan-07 19:41:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 0.000 0.000 0.000 2010-Jan-07 19:44:47 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-Jan-07 19:44:47 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-Jan-07 19:44:47 LOG5 restart_wapp: Calling 'restart_wapp' 2010-Jan-07 19:44:47 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-Jan-07 19:44:47 LOG5 begin_task: Level: (1) ID = <10279> Status = 0 0 0 0 ok 2010-Jan-07 19:44:47 NOTE restart_wapp: Restarting all WAPPs 2010-Jan-07 19:44:47 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-Jan-07 19:44:48 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-Jan-07 19:44:48 LOG5 end_task: Level: (1) ID = <10279> Status = 0 0 0 0 ok 2010-Jan-07 19:44:48 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Jan-07 19:44:48 LOG3 exec_msg: Closing socket 2010-Jan-07 19:44:48 LOG3 exec_msg: Closing socket 2010-Jan-07 19:44:48 LOG3 exec_msg: Closing socket 2010-Jan-07 19:44:48 LOG3 exec_msg: Closing socket 2010-Jan-07 19:44:50 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-Jan-07 19:44:50 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-Jan-07 19:44:50 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-Jan-07 19:44:50 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-Jan-07 19:45:00 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Jan-07 19:45:00 LOG4 exec_msg: From OBSERVER: run_command_file 100107.cmd 57 1 40 2010-Jan-07 19:45:00 LOG4 run_command_file: Calling 'run_command_file 100107.cmd 57 1 40' 2010-Jan-07 19:45:00 BEGIN begin_task: Starting task 'running command file '100107.cmd'' 2010-Jan-07 19:45:00 LOG5 begin_task: Level: (1) ID = <10280> Status = 0 0 0 0 ok 2010-Jan-07 19:45:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100107.cmd' ...} 2010-Jan-07 19:45:00 NOTE run_command_file: Starting execution of command file '100107.cmd' from line 57 2010-Jan-07 19:45:00 COMMAND run_command_line: EXECUTING command 57: 'ENDIF' 2010-Jan-07 19:45:00 ERROR run_command_line: ERROR found an 'ENDIF' without matching 'IF'! 2010-Jan-07 19:45:00 LOG1 task_failed: Task 'running command file '100107.cmd'' failed! 2010-Jan-07 19:45:00 LOG5 task_failed: Level: (1) ID = <10280> Status = 0 0 0 0 ok 2010-Jan-07 19:45:00 ALERT run_command_file: Stopping command file processing at line 57! 2010-Jan-07 19:45:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Jan-07 19:45:00 STOP finish_task: Finishing task 'running command file '100107.cmd'' 2010-Jan-07 19:45:00 LOG5 finish_task: Level: (1) ID = <10280> Status = 0 0 0 1 failed 2010-Jan-07 19:45:00 ERROR finish_task: ERROR failed running: command file '100107.cmd' 2010-Jan-07 19:45:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Jan-07 19:45:00 END end_task: Finishing task 'running command file '100107.cmd'' with status 'FAILED' 2010-Jan-07 19:45:00 LOG5 end_task: Level: (1) ID = <10280> Status = 0 0 0 1 failed 2010-Jan-07 19:45:12 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Jan-07 19:45:12 LOG4 exec_msg: From OBSERVER: run_command_file 100107.cmd 58 1 40 2010-Jan-07 19:45:12 LOG4 run_command_file: Calling 'run_command_file 100107.cmd 58 1 40' 2010-Jan-07 19:45:12 BEGIN begin_task: Starting task 'running command file '100107.cmd'' 2010-Jan-07 19:45:12 LOG5 begin_task: Level: (1) ID = <10281> Status = 0 0 0 0 ok 2010-Jan-07 19:45:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100107.cmd' ...} 2010-Jan-07 19:45:12 NOTE run_command_file: Starting execution of command file '100107.cmd' from line 58 2010-Jan-07 19:45:13 COMMAND run_command_line: EXECUTING command 60: 'IF LSTSLEW(AGES2082_p3_074) < 023805 THEN' 2010-Jan-07 19:45:13 LOG3 is_if_valid: Current source data: up 187.1 6.7 UP - - 83 0.1 2010-Jan-07 19:45:13 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES2082_p3_074) < 023805 2010-Jan-07 19:45:13 INFO5 is_if_valid: Condition parsed as: 2.4666326666666665 < 2.6347222222222224 2010-Jan-07 19:45:13 COMMAND run_command_line: EXECUTING command 61: 'FIXEDDRIFT az=167.53 alfaangle=30.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_074 ra=23100.00 dec=245830.00' 2010-Jan-07 19:45:14 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-Jan-07 19:45:14 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-07 19:45:14 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 600 167.53 30.4 hcorcal 5 tracking no off lcorcal first 1 AGES2082_p3_074 23100.00 245830.00 J 8500.0 Heliocentric velocity(optical)' 2010-Jan-07 19:45:14 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-Jan-07 19:45:14 LOG5 begin_task: Level: (2) ID = <10282> Status = 0 0 0 0 ok 2010-Jan-07 19:45:14 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES2082_p3_072' 2010-Jan-07 19:45:14 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-Jan-07 19:45:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES2082_p3_074} 2010-Jan-07 19:45:14 INFO3 fixed_driftmap: Sending telescope to Az = 167.53 and ZA = 6.84 2010-Jan-07 19:45:14 LOG3 track_source: Calling 'track_source AGES2082_p3_074 167.53 6.8374930707 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-Jan-07 19:45:14 START begin_task: Starting task 'sending tracking commands' 2010-Jan-07 19:45:14 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2010-Jan-07 19:45:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES2082_p3_074} INFO {Slewing to source 'AGES2082_p3_074' ...} 2010-Jan-07 19:45:14 INFO1 track_source: Starting to track AGES2082_p3_074 2010-Jan-07 19:45:14 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES2082_p3_074" 2010-Jan-07 19:45:14 LOG3 vw_send: To DATATAKING: set ra 167.53 2010-Jan-07 19:45:14 LOG3 vw_send: To DATATAKING: set dec 6.8374930707 2010-Jan-07 19:45:14 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-07 19:45:14 LOG3 vw_send: To DATATAKING: pnt tr 167.53 6.8374930707 -CF 2010-Jan-07 19:45:14 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 19:45:14 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-07 19:45:14 LOG5 finish_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2010-Jan-07 19:45:14 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-07 19:45:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 19:45:14 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-07 19:45:14 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2010-Jan-07 19:45:14 START begin_task: Starting task 'rotate ALFA to +30.4 degrees' 2010-Jan-07 19:45:14 LOG5 begin_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2010-Jan-07 19:45:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +30.4 degrees ...} 2010-Jan-07 19:45:14 INFO2 rotate_alfa: ALFA commanded to +30.4 degrees 2010-Jan-07 19:45:14 LOG3 sock_errsend: To ALFAMOTOR: POSITION 30.4 REPLY 2010-Jan-07 19:45:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Jan-07 19:45:14 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Jan-07 19:45:14 LOG5 begin_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2010-Jan-07 19:45:14 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES2082_p3_074" 2010-Jan-07 19:45:14 LOG4 got_cormsg: From DATATAKING: set ra 167.53 2010-Jan-07 19:45:14 LOG4 got_cormsg: From DATATAKING: set dec 6.8374930707 2010-Jan-07 19:45:14 LOG4 got_cormsg: From DATATAKING: vw% 167.53 2010-Jan-07 19:45:14 LOG4 got_cormsg: From DATATAKING: vw% 6.8374930707 2010-Jan-07 19:45:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 19:45:14 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-07 19:45:14 LOG4 got_cormsg: From DATATAKING: pnt tr 167.53 6.8374930707 -CF 2010-Jan-07 19:45:14 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 19:45:14 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Jan-07 19:45:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 19:45:28 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Jan-07 19:45:28 INFO3 alfa_motor: ALFA rotator in-position +30.40 degrees 2010-Jan-07 19:45:28 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Jan-07 19:45:28 LOG5 end_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2010-Jan-07 19:45:28 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-07 19:45:28 STOP finish_task: Finishing task 'rotate ALFA to +30.4 degrees' 2010-Jan-07 19:45:28 LOG5 finish_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2010-Jan-07 19:45:28 INFO2 finish_task: DONE finished configuration: rotating ALFA to +30.4 degrees 2010-Jan-07 19:45:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 19:45:28 STOP end_task: Finishing task 'rotate ALFA to +30.4 degrees' with status 'OK' 2010-Jan-07 19:45:28 LOG5 end_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2010-Jan-07 19:45:28 START begin_task: Starting task 'waiting on telescope' 2010-Jan-07 19:45:28 LOG5 begin_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2010-Jan-07 19:45:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Jan-07 19:45:28 LOG3 waittrk: Start waittrk 5 2010-Jan-07 19:45:28 START begin_task: Starting task 'waiting on telescope movement' 2010-Jan-07 19:45:28 LOG5 begin_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2010-Jan-07 19:45:33 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Jan-07 19:45:33 LOG5 end_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2010-Jan-07 19:45:33 START begin_task: Starting task 'waiting on telescope on source' 2010-Jan-07 19:45:33 LOG5 begin_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2010-Jan-07 19:46:11 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Jan-07 19:46:11 LOG5 end_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2010-Jan-07 19:46:11 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-07 19:46:11 INFO2 waittrk: Now tracking AGES2082_p3_074 2010-Jan-07 19:46:11 LOG4 waittrk: Current telescope position: Az = 167.30 ZA = 6.86 2010-Jan-07 19:46:11 STOP finish_task: Finishing task 'waiting on telescope' 2010-Jan-07 19:46:11 LOG5 finish_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2010-Jan-07 19:46:11 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Jan-07 19:46:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 19:46:11 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Jan-07 19:46:11 LOG5 end_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2010-Jan-07 19:46:11 START begin_task: Starting task 'selecting calibration type' 2010-Jan-07 19:46:11 LOG5 begin_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2010-Jan-07 19:46:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-07 19:46:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-07 19:46:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 19:46:11 START begin_task: Starting task 'waiting on setcal' 2010-Jan-07 19:46:11 LOG5 begin_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2010-Jan-07 19:46:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-07 19:46:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 19:46:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 19:46:11 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 19:46:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-07 19:46:11 LOG5 end_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2010-Jan-07 19:46:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-07 19:46:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 19:46:11 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-07 19:46:11 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 19:46:11 LOG5 begin_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2010-Jan-07 19:46:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 19:46:12 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 19:46:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 19:46:12 LOG5 end_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2010-Jan-07 19:46:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 19:46:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-07 19:46:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 19:46:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-07 19:46:12 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 19:46:12 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2010-Jan-07 19:46:12 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 19:46:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 19:46:12 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2010-Jan-07 19:46:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 19:46:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-07 19:46:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-07 19:46:12 LOG5 end_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2010-Jan-07 19:46:12 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2010-Jan-07 19:46:12 INFO2 astwait: Waiting for 491 seconds from 23:46:12 to 23:54:23 UTC ... 2010-Jan-07 19:46:12 LOG4 send_obs_status: To obs_status: <1> TASKTIME 491 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Jan-07 19:46:12 START begin_task: Starting task 'waiting on waiting for AST time' 2010-Jan-07 19:46:12 LOG5 begin_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2010-Jan-07 19:54:23 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2010-Jan-07 19:54:23 LOG5 end_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2010-Jan-07 19:54:23 INFO3 astwait: Finished waiting 2010-Jan-07 19:54:23 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Jan-07 19:54:23 LOG5 dopset_later: Calling 'dopset_later 60.87157807802425' 2010-Jan-07 19:54:23 INFO3 dopset_later: Setting Doppler correction for 19:55:23 (60.9 seconds from now) 2010-Jan-07 19:54:23 LOG5 antvel: Calling 'antvel 167.530000 6.837493 F Heliocentric 60.87157807802425' 2010-Jan-07 19:54:23 LOG2 antvel: Transforming current Az = 167.53 ZA = 6.84 to apparent RA = 02:31:36.1 Dec = +25:01:21.5 2010-Jan-07 19:54:23 LOG2 antvel: Parameters to Doppler: Heliocentric 86123 2010 7 0.0 2010-Jan-07 19:54:23 INFO5 antvel: Computed antenna velocity: +26.84605 km/s 2010-Jan-07 19:54:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=26.846053776000002 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-Jan-07 19:54:23 INFO4 dopset_gen: New sky frequencies: 1381.119751 1381.119751 1381.119751 1381.119751 1381.119751 1381.119751 1381.119751 1381.119751 1381.119751 2010-Jan-07 19:54:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.119751 sky0=1381.119751 sky1=1381.119751 sky2=1381.119751 sky3=1381.119751 sky4=1381.119751 sky5=1381.119751 sky6=1381.119751 sky7=1381.119751 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 19:54:23 LOG2 dopset_gen: Result from 'sky2syn': 1631.119751 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 19:54:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631119751.0} 2010-Jan-07 19:54:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 19:54:23 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2010-Jan-07 19:54:23 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2010-Jan-07 19:54:23 INFO5 fixed_driftmap: Tracking J2000 position: RA = 02:30:03.6 Dec = +24:58:42.3 2010-Jan-07 19:54:23 LOG3 track_source: Calling 'track_source AGES2082_p3_074 023003.6 245842.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-Jan-07 19:54:23 START begin_task: Starting task 'sending tracking commands' 2010-Jan-07 19:54:23 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2010-Jan-07 19:54:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES2082_p3_074} INFO {Slewing to source 'AGES2082_p3_074' ...} 2010-Jan-07 19:54:23 INFO1 track_source: Starting to track AGES2082_p3_074 2010-Jan-07 19:54:23 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES2082_p3_074" 2010-Jan-07 19:54:23 LOG3 vw_send: To DATATAKING: set ra 023003.6 2010-Jan-07 19:54:23 LOG3 vw_send: To DATATAKING: set dec 245842.3 2010-Jan-07 19:54:23 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-07 19:54:23 LOG3 vw_send: To DATATAKING: pnt tr 023003.6 245842.3 -CJ 2010-Jan-07 19:54:23 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 19:54:23 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-07 19:54:23 LOG5 finish_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2010-Jan-07 19:54:23 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-07 19:54:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 19:54:23 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-07 19:54:23 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2010-Jan-07 19:54:23 START begin_task: Starting task 'waiting on telescope' 2010-Jan-07 19:54:23 LOG5 begin_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2010-Jan-07 19:54:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Jan-07 19:54:23 LOG3 waittrk: Start waittrk 5 2010-Jan-07 19:54:23 START begin_task: Starting task 'waiting on telescope movement' 2010-Jan-07 19:54:23 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2010-Jan-07 19:54:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631119751.0} 2010-Jan-07 19:54:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 19:54:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 19:54:23 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES2082_p3_074" 2010-Jan-07 19:54:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 19:54:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 19:54:23 LOG4 got_cormsg: From DATATAKING: set ra 023003.6 2010-Jan-07 19:54:23 LOG4 got_cormsg: From DATATAKING: set dec 245842.3 2010-Jan-07 19:54:23 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-07 19:54:23 LOG4 got_cormsg: From DATATAKING: pnt tr 023003.6 245842.3 -CJ 2010-Jan-07 19:54:23 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 19:54:23 LOG4 got_cormsg: From DATATAKING: 023003.6 2010-Jan-07 19:54:23 LOG4 got_cormsg: From DATATAKING: vw% 245842.3 2010-Jan-07 19:54:23 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2010-Jan-07 19:54:28 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Jan-07 19:54:28 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2010-Jan-07 19:54:28 START begin_task: Starting task 'waiting on telescope on source' 2010-Jan-07 19:54:28 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2010-Jan-07 19:54:30 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Jan-07 19:54:30 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2010-Jan-07 19:54:30 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-07 19:54:30 INFO2 waittrk: Now tracking AGES2082_p3_074 2010-Jan-07 19:54:30 LOG4 waittrk: Current telescope position: Az = 167.16 ZA = 6.86 2010-Jan-07 19:54:30 STOP finish_task: Finishing task 'waiting on telescope' 2010-Jan-07 19:54:30 LOG5 finish_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2010-Jan-07 19:54:30 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Jan-07 19:54:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 19:54:30 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Jan-07 19:54:30 LOG5 end_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2010-Jan-07 19:54:30 START begin_task: Starting task 'adjusting WAPP+Mock power' 2010-Jan-07 19:54:30 LOG5 begin_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2010-Jan-07 19:54:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2010-Jan-07 19:54:30 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2010-Jan-07 19:54:30 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Jan-07 19:54:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Jan-07 19:54:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 19:54:30 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Jan-07 19:54:30 LOG5 begin_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2010-Jan-07 19:54:30 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Jan-07 19:54:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 19:54:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 19:54:33 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 19:54:33 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Jan-07 19:54:33 LOG5 end_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2010-Jan-07 19:54:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Jan-07 19:54:33 START begin_task: Starting task 'adjusting WAPP power' 2010-Jan-07 19:54:33 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2010-Jan-07 19:54:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Jan-07 19:54:33 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 19:54:33 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 19:54:33 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 19:54:33 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 19:54:33 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Jan-07 19:54:33 LOG5 begin_task: Level: (5) ID = <10301> Status = 0 0 0 0 ok 2010-Jan-07 19:54:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Jan-07 19:54:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 19:54:34 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 7 dB --- beam 1: 7 7 dB 2010-Jan-07 19:54:34 LOG5 wapp_failed: Calling 'wapp_failed 4' 2010-Jan-07 19:54:34 ERROR wapp_failed: ERROR WAPP-4 failed to complete its current task! 2010-Jan-07 19:54:34 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 4 abort' 2010-Jan-07 19:54:34 START begin_task: Starting task 'handling WAPP failure' 2010-Jan-07 19:54:34 LOG5 begin_task: Level: (6) ID = <10302> Status = 0 0 0 0 ok 2010-Jan-07 19:54:34 NOTE handle_wapp_failure: Will abort task 'running command file '100107.cmd'' since the WAPP failure preference is set to 'abort'! 2010-Jan-07 19:54:34 ALERT handle_wapp_failure: Aborting due to WAPP failure! 2010-Jan-07 19:54:34 LOG1 task_failed: Task 'handling WAPP failure' failed! 2010-Jan-07 19:54:34 LOG5 task_failed: Level: (6) ID = <10302> Status = 0 0 0 0 ok 2010-Jan-07 19:54:34 WARNING abort_task: WARNING abort requested! 2010-Jan-07 19:54:34 WARNING abort_task: WARNING Aborting handling WAPP failure 2010-Jan-07 19:54:34 WARNING abort_task: WARNING Aborting wait for handling WAPP failure 2010-Jan-07 19:54:34 STOP end_task: Finishing task 'handling WAPP failure' with status 'FAILED' 2010-Jan-07 19:54:34 LOG5 end_task: Level: (6) ID = <10302> Status = 1 0 0 1 failed 2010-Jan-07 19:54:34 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'FAILED' 2010-Jan-07 19:54:34 LOG5 end_task: Level: (5) ID = <10301> Status = 1 0 0 1 failed 2010-Jan-07 19:54:34 START begin_task: Starting task 'stopping the WAPPs' 2010-Jan-07 19:54:34 LOG5 begin_task: Level: (5) ID = <10303> Status = 1 0 0 1 failed 2010-Jan-07 19:54:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2010-Jan-07 19:54:34 INFO1 stop_wapp: Stopping the WAPPs 2010-Jan-07 19:54:34 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2010-Jan-07 19:54:34 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2010-Jan-07 19:54:34 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2010-Jan-07 19:54:34 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2010-Jan-07 19:54:34 START begin_task: Starting task 'waiting on stopping WAPPs' 2010-Jan-07 19:54:34 LOG5 begin_task: Level: (6) ID = <10304> Status = 1 0 0 1 failed 2010-Jan-07 19:54:34 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 2 3 dB --- beam 3: 4 4 dB 2010-Jan-07 19:54:34 ERROR WAPP=4-adjust_power: ERROR power adjustment failed! 2010-Jan-07 19:54:34 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 5 dB 2010-Jan-07 19:54:34 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'FAILED' 2010-Jan-07 19:54:34 LOG5 end_task: Level: (6) ID = <10304> Status = 1 0 0 1 failed 2010-Jan-07 19:54:34 STOP end_task: Finishing task 'stopping the WAPPs' with status 'FAILED' 2010-Jan-07 19:54:34 LOG5 end_task: Level: (5) ID = <10303> Status = 1 0 0 1 failed 2010-Jan-07 19:54:34 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Jan-07 19:54:34 LOG5 finish_task: Level: (4) ID = <10300> Status = 1 0 0 1 failed 2010-Jan-07 19:54:34 ERROR finish_task: ERROR failed adjusting: WAPP power 2010-Jan-07 19:54:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-Jan-07 19:54:34 STOP end_task: Finishing task 'adjusting WAPP power' with status 'FAILED' 2010-Jan-07 19:54:34 LOG5 end_task: Level: (4) ID = <10300> Status = 1 0 0 1 failed 2010-Jan-07 19:54:34 START begin_task: Starting task 'adjusting Mock spectrometer power' 2010-Jan-07 19:54:34 LOG5 begin_task: Level: (4) ID = <10305> Status = 1 0 0 1 failed 2010-Jan-07 19:54:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Jan-07 19:54:34 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2010-Jan-07 19:54:34 LOG5 finish_task: Level: (4) ID = <10305> Status = 1 0 0 1 failed 2010-Jan-07 19:54:34 ERROR finish_task: ERROR failed adjusting: Mock spectrometer power 2010-Jan-07 19:54:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-Jan-07 19:54:34 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'FAILED' 2010-Jan-07 19:54:34 LOG5 end_task: Level: (4) ID = <10305> Status = 1 0 0 1 failed 2010-Jan-07 19:54:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-07 19:54:34 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2010-Jan-07 19:54:34 LOG5 finish_task: Level: (3) ID = <10298> Status = 1 0 0 1 failed 2010-Jan-07 19:54:34 ERROR finish_task: ERROR failed adjusting: WAPP+Mock power levels 2010-Jan-07 19:54:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-Jan-07 19:54:34 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'FAILED' 2010-Jan-07 19:54:34 LOG5 end_task: Level: (3) ID = <10298> Status = 1 0 0 1 failed 2010-Jan-07 19:54:35 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-Jan-07 19:54:35 LOG5 finish_task: Level: (2) ID = <10282> Status = 1 0 0 1 failed 2010-Jan-07 19:54:35 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2010-Jan-07 19:54:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Jan-07 19:54:35 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2010-Jan-07 19:54:35 LOG5 end_task: Level: (2) ID = <10282> Status = 1 0 0 1 failed 2010-Jan-07 19:54:35 ALERT run_command_file: Stopping command file processing at line 61! 2010-Jan-07 19:54:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Jan-07 19:54:35 STOP finish_task: Finishing task 'running command file '100107.cmd'' 2010-Jan-07 19:54:35 LOG5 finish_task: Level: (1) ID = <10281> Status = 1 0 0 1 failed 2010-Jan-07 19:54:35 ERROR finish_task: ERROR failed running: command file '100107.cmd' 2010-Jan-07 19:54:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Jan-07 19:54:35 END end_task: Finishing task 'running command file '100107.cmd'' with status 'FAILED' 2010-Jan-07 19:54:35 LOG5 end_task: Level: (1) ID = <10281> Status = 1 0 0 1 failed 2010-Jan-07 19:54:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2010-Jan-07 19:54:35 INFO1 WAPP=1+2+3-adjust_power: DONE adjusting power 2010-Jan-07 19:54:35 INFO1 WAPP=1+2+4-wappcon: Can't abort --- the WAPP isn't running 2010-Jan-07 19:54:35 INFO1 WAPP=3-wappcon: Can't abort --- the WAPP isn't running 2010-Jan-07 19:54:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.000 < 0.75)! 2010-Jan-07 19:54:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.006 0.891 0.928 0.950 2010-Jan-07 19:54:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.964 1.022 1.072 0.901 2010-Jan-07 19:54:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.059 1.097 1.053 1.011 2010-Jan-07 19:54:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 0.000 0.000 0.000 2010-Jan-07 19:56:22 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 19:56:22.301 (seconds: 71782.301)!} 2010-Jan-07 19:56:22 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 19:56:22.301 (seconds: 71782.301)! 2010-Jan-07 19:56:50 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Jan-07 19:56:50 LOG4 exec_msg: From OBSERVER: run_command_file 100107.cmd 64 1 40 2010-Jan-07 19:56:50 LOG4 run_command_file: Calling 'run_command_file 100107.cmd 64 1 40' 2010-Jan-07 19:56:50 BEGIN begin_task: Starting task 'running command file '100107.cmd'' 2010-Jan-07 19:56:50 LOG5 begin_task: Level: (1) ID = <10306> Status = 0 0 0 0 ok 2010-Jan-07 19:56:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100107.cmd' ...} 2010-Jan-07 19:56:50 NOTE run_command_file: Starting execution of command file '100107.cmd' from line 64 2010-Jan-07 19:56:50 COMMAND run_command_line: EXECUTING command 64: 'ENDIF' 2010-Jan-07 19:56:50 ERROR run_command_line: ERROR found an 'ENDIF' without matching 'IF'! 2010-Jan-07 19:56:50 LOG1 task_failed: Task 'running command file '100107.cmd'' failed! 2010-Jan-07 19:56:50 LOG5 task_failed: Level: (1) ID = <10306> Status = 0 0 0 0 ok 2010-Jan-07 19:56:50 ALERT run_command_file: Stopping command file processing at line 64! 2010-Jan-07 19:56:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Jan-07 19:56:50 STOP finish_task: Finishing task 'running command file '100107.cmd'' 2010-Jan-07 19:56:50 LOG5 finish_task: Level: (1) ID = <10306> Status = 0 0 0 1 failed 2010-Jan-07 19:56:50 ERROR finish_task: ERROR failed running: command file '100107.cmd' 2010-Jan-07 19:56:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Jan-07 19:56:50 END end_task: Finishing task 'running command file '100107.cmd'' with status 'FAILED' 2010-Jan-07 19:56:50 LOG5 end_task: Level: (1) ID = <10306> Status = 0 0 0 1 failed 2010-Jan-07 19:56:54 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Jan-07 19:56:54 LOG4 exec_msg: From OBSERVER: run_command_file 100107.cmd 65 1 40 2010-Jan-07 19:56:54 LOG4 run_command_file: Calling 'run_command_file 100107.cmd 65 1 40' 2010-Jan-07 19:56:54 BEGIN begin_task: Starting task 'running command file '100107.cmd'' 2010-Jan-07 19:56:54 LOG5 begin_task: Level: (1) ID = <10307> Status = 0 0 0 0 ok 2010-Jan-07 19:56:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100107.cmd' ...} 2010-Jan-07 19:56:54 NOTE run_command_file: Starting execution of command file '100107.cmd' from line 65 2010-Jan-07 19:56:54 COMMAND run_command_line: EXECUTING command 67: 'IF LSTSLEW(AGES2082_p3_076) < 025035 THEN' 2010-Jan-07 19:56:55 LOG3 is_if_valid: Current source data: up 164.6 6.9 UP - - 72 0.1 2010-Jan-07 19:56:55 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES2082_p3_076) < 025035 2010-Jan-07 19:56:55 INFO5 is_if_valid: Condition parsed as: 2.6618876666666664 < 2.8430555555555559 2010-Jan-07 19:56:55 COMMAND run_command_line: EXECUTING command 68: 'FIXEDDRIFT az=147.15 alfaangle=49.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_076 ra=23100.00 dec=245530.00' 2010-Jan-07 19:56:55 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-Jan-07 19:56:55 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-07 19:56:55 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 600 147.15 49.7 hcorcal 5 tracking no off lcorcal first 1 AGES2082_p3_076 23100.00 245530.00 J 8500.0 Heliocentric velocity(optical)' 2010-Jan-07 19:56:55 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-Jan-07 19:56:55 LOG5 begin_task: Level: (2) ID = <10308> Status = 0 0 0 0 ok 2010-Jan-07 19:56:55 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES2082_p3_074' 2010-Jan-07 19:56:55 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-Jan-07 19:56:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES2082_p3_076} 2010-Jan-07 19:56:55 INFO3 fixed_driftmap: Sending telescope to Az = 147.15 and ZA = 7.95 2010-Jan-07 19:56:55 LOG3 track_source: Calling 'track_source AGES2082_p3_076 147.15 7.9535221162 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-Jan-07 19:56:55 START begin_task: Starting task 'sending tracking commands' 2010-Jan-07 19:56:55 LOG5 begin_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2010-Jan-07 19:56:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES2082_p3_076} INFO {Slewing to source 'AGES2082_p3_076' ...} 2010-Jan-07 19:56:55 INFO1 track_source: Starting to track AGES2082_p3_076 2010-Jan-07 19:56:55 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES2082_p3_076" 2010-Jan-07 19:56:55 LOG3 vw_send: To DATATAKING: set ra 147.15 2010-Jan-07 19:56:55 LOG3 vw_send: To DATATAKING: set dec 7.9535221162 2010-Jan-07 19:56:55 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-07 19:56:55 LOG3 vw_send: To DATATAKING: pnt tr 147.15 7.9535221162 -CF 2010-Jan-07 19:56:55 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 19:56:55 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-07 19:56:55 LOG5 finish_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2010-Jan-07 19:56:55 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-07 19:56:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 19:56:55 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-07 19:56:55 LOG5 end_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2010-Jan-07 19:56:55 START begin_task: Starting task 'rotate ALFA to +49.7 degrees' 2010-Jan-07 19:56:55 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2010-Jan-07 19:56:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +49.7 degrees ...} 2010-Jan-07 19:56:56 INFO2 rotate_alfa: ALFA commanded to +49.7 degrees 2010-Jan-07 19:56:56 LOG3 sock_errsend: To ALFAMOTOR: POSITION 49.7 REPLY 2010-Jan-07 19:56:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Jan-07 19:56:56 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Jan-07 19:56:56 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2010-Jan-07 19:56:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES2082_p3_076" 2010-Jan-07 19:56:56 LOG4 got_cormsg: From DATATAKING: set ra 147.15 2010-Jan-07 19:56:56 LOG4 got_cormsg: From DATATAKING: set dec 7.9535221162 2010-Jan-07 19:56:56 LOG4 got_cormsg: From DATATAKING: vw% 147.15 2010-Jan-07 19:56:56 LOG4 got_cormsg: From DATATAKING: vw% 7.9535221162 2010-Jan-07 19:56:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 19:56:56 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-07 19:56:56 LOG4 got_cormsg: From DATATAKING: pnt tr 147.15 7.9535221162 -CF 2010-Jan-07 19:56:56 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 19:56:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Jan-07 19:56:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 19:57:08 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Jan-07 19:57:08 INFO3 alfa_motor: ALFA rotator in-position +49.70 degrees 2010-Jan-07 19:57:08 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Jan-07 19:57:08 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2010-Jan-07 19:57:08 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-07 19:57:08 STOP finish_task: Finishing task 'rotate ALFA to +49.7 degrees' 2010-Jan-07 19:57:08 LOG5 finish_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2010-Jan-07 19:57:08 INFO2 finish_task: DONE finished configuration: rotating ALFA to +49.7 degrees 2010-Jan-07 19:57:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 19:57:08 STOP end_task: Finishing task 'rotate ALFA to +49.7 degrees' with status 'OK' 2010-Jan-07 19:57:08 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2010-Jan-07 19:57:08 START begin_task: Starting task 'waiting on telescope' 2010-Jan-07 19:57:08 LOG5 begin_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2010-Jan-07 19:57:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Jan-07 19:57:08 LOG3 waittrk: Start waittrk 5 2010-Jan-07 19:57:08 START begin_task: Starting task 'waiting on telescope movement' 2010-Jan-07 19:57:08 LOG5 begin_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2010-Jan-07 19:57:13 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Jan-07 19:57:13 LOG5 end_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2010-Jan-07 19:57:13 START begin_task: Starting task 'waiting on telescope on source' 2010-Jan-07 19:57:13 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2010-Jan-07 19:57:47 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Jan-07 19:57:47 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2010-Jan-07 19:57:47 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-07 19:57:47 INFO2 waittrk: Now tracking AGES2082_p3_076 2010-Jan-07 19:57:47 LOG4 waittrk: Current telescope position: Az = 146.92 ZA = 7.96 2010-Jan-07 19:57:47 STOP finish_task: Finishing task 'waiting on telescope' 2010-Jan-07 19:57:47 LOG5 finish_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2010-Jan-07 19:57:47 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Jan-07 19:57:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 19:57:47 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Jan-07 19:57:47 LOG5 end_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2010-Jan-07 19:57:47 START begin_task: Starting task 'selecting calibration type' 2010-Jan-07 19:57:47 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2010-Jan-07 19:57:47 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-07 19:57:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-07 19:57:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 19:57:47 START begin_task: Starting task 'waiting on setcal' 2010-Jan-07 19:57:47 LOG5 begin_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2010-Jan-07 19:57:47 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-07 19:57:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 19:57:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 19:57:48 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 19:57:48 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-07 19:57:48 LOG5 end_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2010-Jan-07 19:57:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-07 19:57:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 19:57:48 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-07 19:57:48 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 19:57:48 LOG5 begin_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2010-Jan-07 19:57:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 19:57:48 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 19:57:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 19:57:48 LOG5 end_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2010-Jan-07 19:57:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 19:57:48 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-07 19:57:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 19:57:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-07 19:57:48 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 19:57:48 LOG5 begin_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2010-Jan-07 19:57:48 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 19:57:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 19:57:48 LOG5 end_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2010-Jan-07 19:57:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 19:57:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-07 19:57:48 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-07 19:57:48 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2010-Jan-07 19:57:48 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2010-Jan-07 19:57:48 INFO2 astwait: Waiting for 543 seconds from 23:57:48 to 00:06:51 UTC ... 2010-Jan-07 19:57:48 LOG4 send_obs_status: To obs_status: <1> TASKTIME 543 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Jan-07 19:57:48 START begin_task: Starting task 'waiting on waiting for AST time' 2010-Jan-07 19:57:48 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2010-Jan-07 20:06:51 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2010-Jan-07 20:06:51 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2010-Jan-07 20:06:51 INFO3 astwait: Finished waiting 2010-Jan-07 20:06:51 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Jan-07 20:06:51 LOG5 dopset_later: Calling 'dopset_later 60.512464446435409' 2010-Jan-07 20:06:51 INFO3 dopset_later: Setting Doppler correction for 20:07:51 (60.5 seconds from now) 2010-Jan-07 20:06:51 LOG5 antvel: Calling 'antvel 147.150000 7.953522 F Heliocentric 60.512464446435409' 2010-Jan-07 20:06:51 LOG2 antvel: Transforming current Az = 147.15 ZA = 7.95 to apparent RA = 02:31:36.1 Dec = +24:58:21.4 2010-Jan-07 20:06:51 LOG2 antvel: Parameters to Doppler: Heliocentric 86871 2010 7 0.0 2010-Jan-07 20:06:51 INFO5 antvel: Computed antenna velocity: +26.87730 km/s 2010-Jan-07 20:06:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=26.877300423299999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-Jan-07 20:06:51 INFO4 dopset_gen: New sky frequencies: 1381.119607 1381.119607 1381.119607 1381.119607 1381.119607 1381.119607 1381.119607 1381.119607 1381.119607 2010-Jan-07 20:06:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.119607 sky0=1381.119607 sky1=1381.119607 sky2=1381.119607 sky3=1381.119607 sky4=1381.119607 sky5=1381.119607 sky6=1381.119607 sky7=1381.119607 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 20:06:51 LOG2 dopset_gen: Result from 'sky2syn': 1631.119607 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 20:06:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631119607.0} 2010-Jan-07 20:06:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 20:06:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2010-Jan-07 20:06:51 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2010-Jan-07 20:06:51 INFO5 fixed_driftmap: Tracking J2000 position: RA = 02:30:04.0 Dec = +24:55:42.3 2010-Jan-07 20:06:51 LOG3 track_source: Calling 'track_source AGES2082_p3_076 023004.0 245542.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-Jan-07 20:06:51 START begin_task: Starting task 'sending tracking commands' 2010-Jan-07 20:06:51 LOG5 begin_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2010-Jan-07 20:06:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES2082_p3_076} INFO {Slewing to source 'AGES2082_p3_076' ...} 2010-Jan-07 20:06:51 INFO1 track_source: Starting to track AGES2082_p3_076 2010-Jan-07 20:06:51 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES2082_p3_076" 2010-Jan-07 20:06:51 LOG3 vw_send: To DATATAKING: set ra 023004.0 2010-Jan-07 20:06:51 LOG3 vw_send: To DATATAKING: set dec 245542.3 2010-Jan-07 20:06:51 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-07 20:06:51 LOG3 vw_send: To DATATAKING: pnt tr 023004.0 245542.3 -CJ 2010-Jan-07 20:06:51 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 20:06:51 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-07 20:06:51 LOG5 finish_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2010-Jan-07 20:06:51 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-07 20:06:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 20:06:51 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-07 20:06:51 LOG5 end_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2010-Jan-07 20:06:51 START begin_task: Starting task 'waiting on telescope' 2010-Jan-07 20:06:51 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2010-Jan-07 20:06:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Jan-07 20:06:51 LOG3 waittrk: Start waittrk 5 2010-Jan-07 20:06:51 START begin_task: Starting task 'waiting on telescope movement' 2010-Jan-07 20:06:51 LOG5 begin_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2010-Jan-07 20:06:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631119607.0} 2010-Jan-07 20:06:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 20:06:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 20:06:51 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES2082_p3_076" 2010-Jan-07 20:06:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 20:06:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 20:06:51 LOG4 got_cormsg: From DATATAKING: set ra 023004.0 2010-Jan-07 20:06:51 LOG4 got_cormsg: From DATATAKING: set dec 245542.3 2010-Jan-07 20:06:51 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-07 20:06:51 LOG4 got_cormsg: From DATATAKING: pnt tr 023004.0 245542.3 -CJ 2010-Jan-07 20:06:51 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 20:06:51 LOG4 got_cormsg: From DATATAKING: 023004.0 2010-Jan-07 20:06:51 LOG4 got_cormsg: From DATATAKING: vw% 245542.3 2010-Jan-07 20:06:51 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2010-Jan-07 20:06:56 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Jan-07 20:06:56 LOG5 end_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2010-Jan-07 20:06:56 START begin_task: Starting task 'waiting on telescope on source' 2010-Jan-07 20:06:56 LOG5 begin_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2010-Jan-07 20:06:58 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Jan-07 20:06:58 LOG5 end_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2010-Jan-07 20:06:58 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-07 20:06:58 INFO2 waittrk: Now tracking AGES2082_p3_076 2010-Jan-07 20:06:58 LOG4 waittrk: Current telescope position: Az = 146.84 ZA = 7.98 2010-Jan-07 20:06:58 STOP finish_task: Finishing task 'waiting on telescope' 2010-Jan-07 20:06:58 LOG5 finish_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2010-Jan-07 20:06:58 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Jan-07 20:06:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 20:06:58 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Jan-07 20:06:58 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2010-Jan-07 20:06:58 START begin_task: Starting task 'adjusting WAPP+Mock power' 2010-Jan-07 20:06:58 LOG5 begin_task: Level: (3) ID = <10324> Status = 0 0 0 0 ok 2010-Jan-07 20:06:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2010-Jan-07 20:06:58 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2010-Jan-07 20:06:58 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Jan-07 20:06:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Jan-07 20:06:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 20:06:58 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Jan-07 20:06:58 LOG5 begin_task: Level: (4) ID = <10325> Status = 0 0 0 0 ok 2010-Jan-07 20:06:59 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Jan-07 20:06:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 20:07:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 20:07:01 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 20:07:01 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Jan-07 20:07:01 LOG5 end_task: Level: (4) ID = <10325> Status = 0 0 0 0 ok 2010-Jan-07 20:07:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Jan-07 20:07:01 START begin_task: Starting task 'adjusting WAPP power' 2010-Jan-07 20:07:01 LOG5 begin_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2010-Jan-07 20:07:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Jan-07 20:07:01 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 20:07:02 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 20:07:02 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 20:07:02 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 20:07:02 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Jan-07 20:07:02 LOG5 begin_task: Level: (5) ID = <10327> Status = 0 0 0 0 ok 2010-Jan-07 20:07:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Jan-07 20:07:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 20:07:02 LOG5 wapp_failed: Calling 'wapp_failed 4' 2010-Jan-07 20:07:02 ERROR wapp_failed: ERROR WAPP-4 failed to complete its current task! 2010-Jan-07 20:07:02 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 4 abort' 2010-Jan-07 20:07:02 START begin_task: Starting task 'handling WAPP failure' 2010-Jan-07 20:07:02 LOG5 begin_task: Level: (6) ID = <10328> Status = 0 0 0 0 ok 2010-Jan-07 20:07:02 NOTE handle_wapp_failure: Will abort task 'running command file '100107.cmd'' since the WAPP failure preference is set to 'abort'! 2010-Jan-07 20:07:02 ALERT handle_wapp_failure: Aborting due to WAPP failure! 2010-Jan-07 20:07:02 LOG1 task_failed: Task 'handling WAPP failure' failed! 2010-Jan-07 20:07:02 LOG5 task_failed: Level: (6) ID = <10328> Status = 0 0 0 0 ok 2010-Jan-07 20:07:02 WARNING abort_task: WARNING abort requested! 2010-Jan-07 20:07:02 WARNING abort_task: WARNING Aborting handling WAPP failure 2010-Jan-07 20:07:02 WARNING abort_task: WARNING Aborting wait for handling WAPP failure 2010-Jan-07 20:07:02 STOP end_task: Finishing task 'handling WAPP failure' with status 'FAILED' 2010-Jan-07 20:07:02 LOG5 end_task: Level: (6) ID = <10328> Status = 1 0 0 1 failed 2010-Jan-07 20:07:02 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'FAILED' 2010-Jan-07 20:07:02 LOG5 end_task: Level: (5) ID = <10327> Status = 1 0 0 1 failed 2010-Jan-07 20:07:02 START begin_task: Starting task 'stopping the WAPPs' 2010-Jan-07 20:07:02 LOG5 begin_task: Level: (5) ID = <10329> Status = 1 0 0 1 failed 2010-Jan-07 20:07:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2010-Jan-07 20:07:02 INFO1 stop_wapp: Stopping the WAPPs 2010-Jan-07 20:07:02 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2010-Jan-07 20:07:02 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2010-Jan-07 20:07:02 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2010-Jan-07 20:07:02 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2010-Jan-07 20:07:02 START begin_task: Starting task 'waiting on stopping WAPPs' 2010-Jan-07 20:07:02 LOG5 begin_task: Level: (6) ID = <10330> Status = 1 0 0 1 failed 2010-Jan-07 20:07:02 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 7 dB --- beam 1: 7 7 dB 2010-Jan-07 20:07:02 ERROR WAPP=4-adjust_power: ERROR power adjustment failed! 2010-Jan-07 20:07:02 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 5 dB 2010-Jan-07 20:07:02 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 2 3 dB --- beam 3: 4 4 dB 2010-Jan-07 20:07:02 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'FAILED' 2010-Jan-07 20:07:02 LOG5 end_task: Level: (6) ID = <10330> Status = 1 0 0 1 failed 2010-Jan-07 20:07:02 STOP end_task: Finishing task 'stopping the WAPPs' with status 'FAILED' 2010-Jan-07 20:07:02 LOG5 end_task: Level: (5) ID = <10329> Status = 1 0 0 1 failed 2010-Jan-07 20:07:02 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Jan-07 20:07:02 LOG5 finish_task: Level: (4) ID = <10326> Status = 1 0 0 1 failed 2010-Jan-07 20:07:02 ERROR finish_task: ERROR failed adjusting: WAPP power 2010-Jan-07 20:07:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-Jan-07 20:07:02 STOP end_task: Finishing task 'adjusting WAPP power' with status 'FAILED' 2010-Jan-07 20:07:02 LOG5 end_task: Level: (4) ID = <10326> Status = 1 0 0 1 failed 2010-Jan-07 20:07:02 START begin_task: Starting task 'adjusting Mock spectrometer power' 2010-Jan-07 20:07:02 LOG5 begin_task: Level: (4) ID = <10331> Status = 1 0 0 1 failed 2010-Jan-07 20:07:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Jan-07 20:07:03 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2010-Jan-07 20:07:03 LOG5 finish_task: Level: (4) ID = <10331> Status = 1 0 0 1 failed 2010-Jan-07 20:07:03 ERROR finish_task: ERROR failed adjusting: Mock spectrometer power 2010-Jan-07 20:07:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-Jan-07 20:07:03 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'FAILED' 2010-Jan-07 20:07:03 LOG5 end_task: Level: (4) ID = <10331> Status = 1 0 0 1 failed 2010-Jan-07 20:07:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-07 20:07:03 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2010-Jan-07 20:07:03 LOG5 finish_task: Level: (3) ID = <10324> Status = 1 0 0 1 failed 2010-Jan-07 20:07:03 ERROR finish_task: ERROR failed adjusting: WAPP+Mock power levels 2010-Jan-07 20:07:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-Jan-07 20:07:03 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'FAILED' 2010-Jan-07 20:07:03 LOG5 end_task: Level: (3) ID = <10324> Status = 1 0 0 1 failed 2010-Jan-07 20:07:03 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-Jan-07 20:07:03 LOG5 finish_task: Level: (2) ID = <10308> Status = 1 0 0 1 failed 2010-Jan-07 20:07:03 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2010-Jan-07 20:07:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Jan-07 20:07:03 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2010-Jan-07 20:07:03 LOG5 end_task: Level: (2) ID = <10308> Status = 1 0 0 1 failed 2010-Jan-07 20:07:03 ALERT run_command_file: Stopping command file processing at line 68! 2010-Jan-07 20:07:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Jan-07 20:07:03 STOP finish_task: Finishing task 'running command file '100107.cmd'' 2010-Jan-07 20:07:03 LOG5 finish_task: Level: (1) ID = <10307> Status = 1 0 0 1 failed 2010-Jan-07 20:07:03 ERROR finish_task: ERROR failed running: command file '100107.cmd' 2010-Jan-07 20:07:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Jan-07 20:07:03 END end_task: Finishing task 'running command file '100107.cmd'' with status 'FAILED' 2010-Jan-07 20:07:03 LOG5 end_task: Level: (1) ID = <10307> Status = 1 0 0 1 failed 2010-Jan-07 20:07:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2010-Jan-07 20:07:03 INFO1 WAPP=1+4-wappcon: Can't abort --- the WAPP isn't running 2010-Jan-07 20:07:03 INFO1 WAPP=1+2+3-adjust_power: DONE adjusting power 2010-Jan-07 20:07:03 INFO1 WAPP=2+3-wappcon: Can't abort --- the WAPP isn't running 2010-Jan-07 20:07:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.000 < 0.75)! 2010-Jan-07 20:07:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 0.898 0.942 0.965 2010-Jan-07 20:07:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 1.059 1.085 0.912 2010-Jan-07 20:07:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.088 0.902 1.047 1.035 2010-Jan-07 20:07:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 0.000 0.000 0.000 2010-Jan-07 20:07:13 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Jan-07 20:07:13 LOG4 exec_msg: From OBSERVER: run_command_file 100107.cmd 71 1 40 2010-Jan-07 20:07:13 LOG4 run_command_file: Calling 'run_command_file 100107.cmd 71 1 40' 2010-Jan-07 20:07:13 BEGIN begin_task: Starting task 'running command file '100107.cmd'' 2010-Jan-07 20:07:13 LOG5 begin_task: Level: (1) ID = <10332> Status = 0 0 0 0 ok 2010-Jan-07 20:07:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100107.cmd' ...} 2010-Jan-07 20:07:13 NOTE run_command_file: Starting execution of command file '100107.cmd' from line 71 2010-Jan-07 20:07:13 COMMAND run_command_line: EXECUTING command 71: 'ENDIF' 2010-Jan-07 20:07:13 ERROR run_command_line: ERROR found an 'ENDIF' without matching 'IF'! 2010-Jan-07 20:07:13 LOG1 task_failed: Task 'running command file '100107.cmd'' failed! 2010-Jan-07 20:07:13 LOG5 task_failed: Level: (1) ID = <10332> Status = 0 0 0 0 ok 2010-Jan-07 20:07:13 ALERT run_command_file: Stopping command file processing at line 71! 2010-Jan-07 20:07:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Jan-07 20:07:13 STOP finish_task: Finishing task 'running command file '100107.cmd'' 2010-Jan-07 20:07:13 LOG5 finish_task: Level: (1) ID = <10332> Status = 0 0 0 1 failed 2010-Jan-07 20:07:13 ERROR finish_task: ERROR failed running: command file '100107.cmd' 2010-Jan-07 20:07:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Jan-07 20:07:13 END end_task: Finishing task 'running command file '100107.cmd'' with status 'FAILED' 2010-Jan-07 20:07:13 LOG5 end_task: Level: (1) ID = <10332> Status = 0 0 0 1 failed 2010-Jan-07 20:07:15 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Jan-07 20:07:15 LOG4 exec_msg: From OBSERVER: run_command_file 100107.cmd 72 1 40 2010-Jan-07 20:07:15 LOG4 run_command_file: Calling 'run_command_file 100107.cmd 72 1 40' 2010-Jan-07 20:07:15 BEGIN begin_task: Starting task 'running command file '100107.cmd'' 2010-Jan-07 20:07:15 LOG5 begin_task: Level: (1) ID = <10333> Status = 0 0 0 0 ok 2010-Jan-07 20:07:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100107.cmd' ...} 2010-Jan-07 20:07:15 NOTE run_command_file: Starting execution of command file '100107.cmd' from line 72 2010-Jan-07 20:07:15 COMMAND run_command_line: EXECUTING command 74: 'IF LSTSLEW(AGES2082_p3_078) < 030235 THEN' 2010-Jan-07 20:07:16 LOG3 is_if_valid: Current source data: up 147.7 7.8 UP - - 61 0.1 2010-Jan-07 20:07:16 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES2082_p3_078) < 030235 2010-Jan-07 20:07:16 INFO5 is_if_valid: Condition parsed as: 2.8351386666666665 < 3.0430555555555556 2010-Jan-07 20:07:16 COMMAND run_command_line: EXECUTING command 75: 'FIXEDDRIFT az=133.73 alfaangle=63.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_078 ra=23100.00 dec=245230.00' 2010-Jan-07 20:07:16 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-Jan-07 20:07:16 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-07 20:07:16 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 600 133.73 63.9 hcorcal 5 tracking no off lcorcal first 1 AGES2082_p3_078 23100.00 245230.00 J 8500.0 Heliocentric velocity(optical)' 2010-Jan-07 20:07:16 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-Jan-07 20:07:16 LOG5 begin_task: Level: (2) ID = <10334> Status = 0 0 0 0 ok 2010-Jan-07 20:07:16 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES2082_p3_076' 2010-Jan-07 20:07:16 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-Jan-07 20:07:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES2082_p3_078} 2010-Jan-07 20:07:16 INFO3 fixed_driftmap: Sending telescope to Az = 133.73 and ZA = 9.75 2010-Jan-07 20:07:17 LOG3 track_source: Calling 'track_source AGES2082_p3_078 133.73 9.7450265910 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-Jan-07 20:07:17 START begin_task: Starting task 'sending tracking commands' 2010-Jan-07 20:07:17 LOG5 begin_task: Level: (3) ID = <10335> Status = 0 0 0 0 ok 2010-Jan-07 20:07:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES2082_p3_078} INFO {Slewing to source 'AGES2082_p3_078' ...} 2010-Jan-07 20:07:17 INFO1 track_source: Starting to track AGES2082_p3_078 2010-Jan-07 20:07:17 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES2082_p3_078" 2010-Jan-07 20:07:17 LOG3 vw_send: To DATATAKING: set ra 133.73 2010-Jan-07 20:07:17 LOG3 vw_send: To DATATAKING: set dec 9.7450265910 2010-Jan-07 20:07:17 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-07 20:07:17 LOG3 vw_send: To DATATAKING: pnt tr 133.73 9.7450265910 -CF 2010-Jan-07 20:07:17 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 20:07:17 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-07 20:07:17 LOG5 finish_task: Level: (3) ID = <10335> Status = 0 0 0 0 ok 2010-Jan-07 20:07:17 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-07 20:07:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 20:07:17 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-07 20:07:17 LOG5 end_task: Level: (3) ID = <10335> Status = 0 0 0 0 ok 2010-Jan-07 20:07:17 START begin_task: Starting task 'rotate ALFA to +63.9 degrees' 2010-Jan-07 20:07:17 LOG5 begin_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2010-Jan-07 20:07:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +63.9 degrees ...} 2010-Jan-07 20:07:17 INFO2 rotate_alfa: ALFA commanded to +63.9 degrees 2010-Jan-07 20:07:17 LOG3 sock_errsend: To ALFAMOTOR: POSITION 63.9 REPLY 2010-Jan-07 20:07:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Jan-07 20:07:17 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Jan-07 20:07:17 LOG5 begin_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2010-Jan-07 20:07:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES2082_p3_078" 2010-Jan-07 20:07:17 LOG4 got_cormsg: From DATATAKING: set ra 133.73 2010-Jan-07 20:07:17 LOG4 got_cormsg: From DATATAKING: set dec 9.7450265910 2010-Jan-07 20:07:17 LOG4 got_cormsg: From DATATAKING: vw% 133.73 2010-Jan-07 20:07:17 LOG4 got_cormsg: From DATATAKING: vw% 9.7450265910 2010-Jan-07 20:07:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 20:07:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-07 20:07:17 LOG4 got_cormsg: From DATATAKING: pnt tr 133.73 9.7450265910 -CF 2010-Jan-07 20:07:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 20:07:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Jan-07 20:07:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 20:07:26 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Jan-07 20:07:26 INFO3 alfa_motor: ALFA rotator in-position +63.90 degrees 2010-Jan-07 20:07:26 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Jan-07 20:07:26 LOG5 end_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2010-Jan-07 20:07:26 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-07 20:07:26 STOP finish_task: Finishing task 'rotate ALFA to +63.9 degrees' 2010-Jan-07 20:07:26 LOG5 finish_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2010-Jan-07 20:07:26 INFO2 finish_task: DONE finished configuration: rotating ALFA to +63.9 degrees 2010-Jan-07 20:07:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 20:07:26 STOP end_task: Finishing task 'rotate ALFA to +63.9 degrees' with status 'OK' 2010-Jan-07 20:07:26 LOG5 end_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2010-Jan-07 20:07:26 START begin_task: Starting task 'waiting on telescope' 2010-Jan-07 20:07:26 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2010-Jan-07 20:07:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Jan-07 20:07:26 LOG3 waittrk: Start waittrk 5 2010-Jan-07 20:07:26 START begin_task: Starting task 'waiting on telescope movement' 2010-Jan-07 20:07:26 LOG5 begin_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2010-Jan-07 20:07:32 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Jan-07 20:07:32 LOG5 end_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2010-Jan-07 20:07:32 START begin_task: Starting task 'waiting on telescope on source' 2010-Jan-07 20:07:32 LOG5 begin_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2010-Jan-07 20:08:08 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Jan-07 20:08:08 LOG5 end_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2010-Jan-07 20:08:08 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-07 20:08:08 INFO2 waittrk: Now tracking AGES2082_p3_078 2010-Jan-07 20:08:08 LOG4 waittrk: Current telescope position: Az = 133.51 ZA = 9.75 2010-Jan-07 20:08:08 STOP finish_task: Finishing task 'waiting on telescope' 2010-Jan-07 20:08:08 LOG5 finish_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2010-Jan-07 20:08:08 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Jan-07 20:08:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 20:08:08 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Jan-07 20:08:08 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2010-Jan-07 20:08:08 START begin_task: Starting task 'selecting calibration type' 2010-Jan-07 20:08:08 LOG5 begin_task: Level: (3) ID = <10341> Status = 0 0 0 0 ok 2010-Jan-07 20:08:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-07 20:08:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-07 20:08:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 20:08:08 START begin_task: Starting task 'waiting on setcal' 2010-Jan-07 20:08:08 LOG5 begin_task: Level: (4) ID = <10342> Status = 0 0 0 0 ok 2010-Jan-07 20:08:08 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-07 20:08:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 20:08:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 20:08:08 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 20:08:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-07 20:08:08 LOG5 end_task: Level: (4) ID = <10342> Status = 0 0 0 0 ok 2010-Jan-07 20:08:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-07 20:08:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 20:08:08 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-07 20:08:08 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 20:08:08 LOG5 begin_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2010-Jan-07 20:08:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 20:08:08 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 20:08:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 20:08:08 LOG5 end_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2010-Jan-07 20:08:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 20:08:08 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-07 20:08:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 20:08:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-07 20:08:09 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 20:08:09 LOG5 begin_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2010-Jan-07 20:08:09 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 20:08:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 20:08:09 LOG5 end_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2010-Jan-07 20:08:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 20:08:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-07 20:08:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-07 20:08:09 LOG5 end_task: Level: (3) ID = <10341> Status = 0 0 0 0 ok 2010-Jan-07 20:08:09 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2010-Jan-07 20:08:09 INFO2 astwait: Waiting for 640 seconds from 00:08:09 to 00:18:49 UTC ... 2010-Jan-07 20:08:09 LOG4 send_obs_status: To obs_status: <1> TASKTIME 640 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Jan-07 20:08:09 START begin_task: Starting task 'waiting on waiting for AST time' 2010-Jan-07 20:08:09 LOG5 begin_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2010-Jan-07 20:15:58 COMMAND CIMA-send_to_exec: Sending command to abort observation 2010-Jan-07 20:15:58 LOG4 exec_msg: From OBSERVER: abort_task abort 2010-Jan-07 20:15:58 WARNING abort_task: WARNING abort requested! 2010-Jan-07 20:15:58 WARNING abort_task: WARNING Aborting wait for waiting on waiting for AST time 2010-Jan-07 20:15:58 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'ABORT' 2010-Jan-07 20:15:58 LOG5 end_task: Level: (3) ID = <10345> Status = 1 0 0 0 abort 2010-Jan-07 20:15:58 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Jan-07 20:15:58 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-Jan-07 20:15:58 LOG5 finish_task: Level: (2) ID = <10334> Status = 1 0 0 0 abort 2010-Jan-07 20:15:58 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2010-Jan-07 20:15:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2010-Jan-07 20:15:58 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2010-Jan-07 20:15:58 LOG5 end_task: Level: (2) ID = <10334> Status = 1 0 0 0 abort 2010-Jan-07 20:15:58 ALERT run_command_file: Stopping command file processing at line 75! 2010-Jan-07 20:15:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Jan-07 20:15:58 STOP finish_task: Finishing task 'running command file '100107.cmd'' 2010-Jan-07 20:15:58 LOG5 finish_task: Level: (1) ID = <10333> Status = 1 0 0 0 abort 2010-Jan-07 20:15:58 WARNING finish_task: WARNING aborted running: command file '100107.cmd' 2010-Jan-07 20:15:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2010-Jan-07 20:15:59 END end_task: Finishing task 'running command file '100107.cmd'' with status 'ABORT' 2010-Jan-07 20:15:59 LOG5 end_task: Level: (1) ID = <10333> Status = 1 0 0 0 abort 2010-Jan-07 20:21:28 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Jan-07 20:21:28 LOG4 exec_msg: From OBSERVER: run_command_file 100107.cmd 78 1 40 2010-Jan-07 20:21:28 LOG4 run_command_file: Calling 'run_command_file 100107.cmd 78 1 40' 2010-Jan-07 20:21:28 BEGIN begin_task: Starting task 'running command file '100107.cmd'' 2010-Jan-07 20:21:28 LOG5 begin_task: Level: (1) ID = <10346> Status = 0 0 0 0 ok 2010-Jan-07 20:21:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100107.cmd' ...} 2010-Jan-07 20:21:28 NOTE run_command_file: Starting execution of command file '100107.cmd' from line 78 2010-Jan-07 20:21:29 COMMAND run_command_line: EXECUTING command 78: 'ENDIF' 2010-Jan-07 20:21:29 ERROR run_command_line: ERROR found an 'ENDIF' without matching 'IF'! 2010-Jan-07 20:21:29 LOG1 task_failed: Task 'running command file '100107.cmd'' failed! 2010-Jan-07 20:21:29 LOG5 task_failed: Level: (1) ID = <10346> Status = 0 0 0 0 ok 2010-Jan-07 20:21:29 ALERT run_command_file: Stopping command file processing at line 78! 2010-Jan-07 20:21:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Jan-07 20:21:29 STOP finish_task: Finishing task 'running command file '100107.cmd'' 2010-Jan-07 20:21:29 LOG5 finish_task: Level: (1) ID = <10346> Status = 0 0 0 1 failed 2010-Jan-07 20:21:29 ERROR finish_task: ERROR failed running: command file '100107.cmd' 2010-Jan-07 20:21:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Jan-07 20:21:29 END end_task: Finishing task 'running command file '100107.cmd'' with status 'FAILED' 2010-Jan-07 20:21:29 LOG5 end_task: Level: (1) ID = <10346> Status = 0 0 0 1 failed 2010-Jan-07 20:21:31 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Jan-07 20:21:31 LOG4 exec_msg: From OBSERVER: run_command_file 100107.cmd 79 1 40 2010-Jan-07 20:21:31 LOG4 run_command_file: Calling 'run_command_file 100107.cmd 79 1 40' 2010-Jan-07 20:21:31 BEGIN begin_task: Starting task 'running command file '100107.cmd'' 2010-Jan-07 20:21:31 LOG5 begin_task: Level: (1) ID = <10347> Status = 0 0 0 0 ok 2010-Jan-07 20:21:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100107.cmd' ...} 2010-Jan-07 20:21:31 NOTE run_command_file: Starting execution of command file '100107.cmd' from line 79 2010-Jan-07 20:21:31 COMMAND run_command_line: EXECUTING command 81: 'IF LSTSLEW(AGES2082_p3_080) < 031435 THEN' 2010-Jan-07 20:21:32 LOG3 is_if_valid: Current source data: up 132.0 10.0 UP - - 47 0.1 2010-Jan-07 20:21:32 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES2082_p3_080) < 031435 2010-Jan-07 20:21:32 INFO5 is_if_valid: Condition parsed as: 3.0732886666666666 < 3.2430555555555558 2010-Jan-07 20:21:32 COMMAND run_command_line: EXECUTING command 82: 'FIXEDDRIFT az=125.01 alfaangle=74.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_080 ra=23100.00 dec=244930.00' 2010-Jan-07 20:21:32 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-Jan-07 20:21:32 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-07 20:21:32 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 600 125.01 74.1 hcorcal 5 tracking no off lcorcal first 1 AGES2082_p3_080 23100.00 244930.00 J 8500.0 Heliocentric velocity(optical)' 2010-Jan-07 20:21:32 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-Jan-07 20:21:32 LOG5 begin_task: Level: (2) ID = <10348> Status = 0 0 0 0 ok 2010-Jan-07 20:21:32 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES2082_p3_078' 2010-Jan-07 20:21:32 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-Jan-07 20:21:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES2082_p3_080} 2010-Jan-07 20:21:32 INFO3 fixed_driftmap: Sending telescope to Az = 125.01 and ZA = 11.92 2010-Jan-07 20:21:32 LOG3 track_source: Calling 'track_source AGES2082_p3_080 125.01 11.9245232151 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-Jan-07 20:21:32 START begin_task: Starting task 'sending tracking commands' 2010-Jan-07 20:21:32 LOG5 begin_task: Level: (3) ID = <10349> Status = 0 0 0 0 ok 2010-Jan-07 20:21:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES2082_p3_080} INFO {Slewing to source 'AGES2082_p3_080' ...} 2010-Jan-07 20:21:32 INFO1 track_source: Starting to track AGES2082_p3_080 2010-Jan-07 20:21:32 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES2082_p3_080" 2010-Jan-07 20:21:32 LOG3 vw_send: To DATATAKING: set ra 125.01 2010-Jan-07 20:21:32 LOG3 vw_send: To DATATAKING: set dec 11.9245232151 2010-Jan-07 20:21:32 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-07 20:21:32 LOG3 vw_send: To DATATAKING: pnt tr 125.01 11.9245232151 -CF 2010-Jan-07 20:21:32 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 20:21:32 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-07 20:21:32 LOG5 finish_task: Level: (3) ID = <10349> Status = 0 0 0 0 ok 2010-Jan-07 20:21:32 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-07 20:21:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 20:21:32 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-07 20:21:32 LOG5 end_task: Level: (3) ID = <10349> Status = 0 0 0 0 ok 2010-Jan-07 20:21:32 START begin_task: Starting task 'rotate ALFA to +74.1 degrees' 2010-Jan-07 20:21:32 LOG5 begin_task: Level: (3) ID = <10350> Status = 0 0 0 0 ok 2010-Jan-07 20:21:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +74.1 degrees ...} 2010-Jan-07 20:21:32 INFO2 rotate_alfa: ALFA commanded to +74.1 degrees 2010-Jan-07 20:21:32 LOG3 sock_errsend: To ALFAMOTOR: POSITION 74.1 REPLY 2010-Jan-07 20:21:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Jan-07 20:21:32 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Jan-07 20:21:32 LOG5 begin_task: Level: (4) ID = <10351> Status = 0 0 0 0 ok 2010-Jan-07 20:21:32 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES2082_p3_080" 2010-Jan-07 20:21:32 LOG4 got_cormsg: From DATATAKING: set ra 125.01 2010-Jan-07 20:21:32 LOG4 got_cormsg: From DATATAKING: set dec 11.9245232151 2010-Jan-07 20:21:32 LOG4 got_cormsg: From DATATAKING: vw% 125.01 2010-Jan-07 20:21:32 LOG4 got_cormsg: From DATATAKING: vw% 11.9245232151 2010-Jan-07 20:21:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 20:21:32 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-07 20:21:32 LOG4 got_cormsg: From DATATAKING: pnt tr 125.01 11.9245232151 -CF 2010-Jan-07 20:21:32 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 20:21:32 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Jan-07 20:21:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 20:21:40 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Jan-07 20:21:40 INFO3 alfa_motor: ALFA rotator in-position +74.10 degrees 2010-Jan-07 20:21:40 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Jan-07 20:21:40 LOG5 end_task: Level: (4) ID = <10351> Status = 0 0 0 0 ok 2010-Jan-07 20:21:40 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-07 20:21:40 STOP finish_task: Finishing task 'rotate ALFA to +74.1 degrees' 2010-Jan-07 20:21:40 LOG5 finish_task: Level: (3) ID = <10350> Status = 0 0 0 0 ok 2010-Jan-07 20:21:40 INFO2 finish_task: DONE finished configuration: rotating ALFA to +74.1 degrees 2010-Jan-07 20:21:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 20:21:40 STOP end_task: Finishing task 'rotate ALFA to +74.1 degrees' with status 'OK' 2010-Jan-07 20:21:40 LOG5 end_task: Level: (3) ID = <10350> Status = 0 0 0 0 ok 2010-Jan-07 20:21:40 START begin_task: Starting task 'waiting on telescope' 2010-Jan-07 20:21:40 LOG5 begin_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2010-Jan-07 20:21:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Jan-07 20:21:40 LOG3 waittrk: Start waittrk 5 2010-Jan-07 20:21:40 START begin_task: Starting task 'waiting on telescope movement' 2010-Jan-07 20:21:40 LOG5 begin_task: Level: (4) ID = <10353> Status = 0 0 0 0 ok 2010-Jan-07 20:21:45 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Jan-07 20:21:45 LOG5 end_task: Level: (4) ID = <10353> Status = 0 0 0 0 ok 2010-Jan-07 20:21:45 START begin_task: Starting task 'waiting on telescope on source' 2010-Jan-07 20:21:45 LOG5 begin_task: Level: (4) ID = <10354> Status = 0 0 0 0 ok 2010-Jan-07 20:22:34 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Jan-07 20:22:34 LOG5 end_task: Level: (4) ID = <10354> Status = 0 0 0 0 ok 2010-Jan-07 20:22:34 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-07 20:22:34 INFO2 waittrk: Now tracking AGES2082_p3_080 2010-Jan-07 20:22:34 LOG4 waittrk: Current telescope position: Az = 124.77 ZA = 11.94 2010-Jan-07 20:22:34 STOP finish_task: Finishing task 'waiting on telescope' 2010-Jan-07 20:22:34 LOG5 finish_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2010-Jan-07 20:22:34 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Jan-07 20:22:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 20:22:35 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Jan-07 20:22:35 LOG5 end_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2010-Jan-07 20:22:35 START begin_task: Starting task 'selecting calibration type' 2010-Jan-07 20:22:35 LOG5 begin_task: Level: (3) ID = <10355> Status = 0 0 0 0 ok 2010-Jan-07 20:22:35 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-07 20:22:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-07 20:22:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 20:22:35 START begin_task: Starting task 'waiting on setcal' 2010-Jan-07 20:22:35 LOG5 begin_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2010-Jan-07 20:22:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-07 20:22:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 20:22:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 20:22:35 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 20:22:35 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-07 20:22:35 LOG5 end_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2010-Jan-07 20:22:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-07 20:22:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 20:22:35 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-07 20:22:35 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 20:22:35 LOG5 begin_task: Level: (4) ID = <10357> Status = 0 0 0 0 ok 2010-Jan-07 20:22:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 20:22:35 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 20:22:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 20:22:35 LOG5 end_task: Level: (4) ID = <10357> Status = 0 0 0 0 ok 2010-Jan-07 20:22:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 20:22:35 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-07 20:22:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-07 20:22:35 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-07 20:22:35 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-07 20:22:35 LOG5 begin_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2010-Jan-07 20:22:35 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-07 20:22:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-07 20:22:35 LOG5 end_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2010-Jan-07 20:22:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-07 20:22:35 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-07 20:22:35 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-07 20:22:35 LOG5 end_task: Level: (3) ID = <10355> Status = 0 0 0 0 ok 2010-Jan-07 20:22:35 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2010-Jan-07 20:22:35 INFO2 astwait: Waiting for 492 seconds from 00:22:35 to 00:30:47 UTC ... 2010-Jan-07 20:22:35 LOG4 send_obs_status: To obs_status: <1> TASKTIME 492 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Jan-07 20:22:35 START begin_task: Starting task 'waiting on waiting for AST time' 2010-Jan-07 20:22:35 LOG5 begin_task: Level: (3) ID = <10359> Status = 0 0 0 0 ok 2010-Jan-07 20:26:20 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 20:26:20.301 (seconds: 73580.301)!} 2010-Jan-07 20:26:20 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 20:26:20.301 (seconds: 73580.301)! 2010-Jan-07 20:30:47 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2010-Jan-07 20:30:47 LOG5 end_task: Level: (3) ID = <10359> Status = 0 0 0 0 ok 2010-Jan-07 20:30:47 INFO3 astwait: Finished waiting 2010-Jan-07 20:30:47 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Jan-07 20:30:47 LOG5 dopset_later: Calling 'dopset_later 60.881434532278888' 2010-Jan-07 20:30:47 INFO3 dopset_later: Setting Doppler correction for 20:31:47 (60.9 seconds from now) 2010-Jan-07 20:30:47 LOG5 antvel: Calling 'antvel 125.010000 11.924523 F Heliocentric 60.881434532278888' 2010-Jan-07 20:30:47 LOG2 antvel: Transforming current Az = 125.01 ZA = 11.92 to apparent RA = 02:31:36.1 Dec = +24:52:21.4 2010-Jan-07 20:30:47 LOG2 antvel: Parameters to Doppler: Heliocentric 88307 2010 7 0.0 2010-Jan-07 20:30:47 INFO5 antvel: Computed antenna velocity: +26.93754 km/s 2010-Jan-07 20:30:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=26.937538222200001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-Jan-07 20:30:47 INFO4 dopset_gen: New sky frequencies: 1381.119330 1381.119330 1381.119330 1381.119330 1381.119330 1381.119330 1381.119330 1381.119330 1381.119330 2010-Jan-07 20:30:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.119330 sky0=1381.119330 sky1=1381.119330 sky2=1381.119330 sky3=1381.119330 sky4=1381.119330 sky5=1381.119330 sky6=1381.119330 sky7=1381.119330 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-07 20:30:47 LOG2 dopset_gen: Result from 'sky2syn': 1631.119330 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-07 20:30:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631119330.0} 2010-Jan-07 20:30:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 20:30:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2010-Jan-07 20:30:47 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2010-Jan-07 20:30:47 INFO5 fixed_driftmap: Tracking J2000 position: RA = 02:30:03.6 Dec = +24:49:42.3 2010-Jan-07 20:30:47 LOG3 track_source: Calling 'track_source AGES2082_p3_080 023003.6 244942.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-Jan-07 20:30:47 START begin_task: Starting task 'sending tracking commands' 2010-Jan-07 20:30:47 LOG5 begin_task: Level: (3) ID = <10360> Status = 0 0 0 0 ok 2010-Jan-07 20:30:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES2082_p3_080} INFO {Slewing to source 'AGES2082_p3_080' ...} 2010-Jan-07 20:30:47 INFO1 track_source: Starting to track AGES2082_p3_080 2010-Jan-07 20:30:47 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES2082_p3_080" 2010-Jan-07 20:30:47 LOG3 vw_send: To DATATAKING: set ra 023003.6 2010-Jan-07 20:30:47 LOG3 vw_send: To DATATAKING: set dec 244942.3 2010-Jan-07 20:30:47 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-07 20:30:47 LOG3 vw_send: To DATATAKING: pnt tr 023003.6 244942.3 -CJ 2010-Jan-07 20:30:47 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 20:30:47 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-07 20:30:47 LOG5 finish_task: Level: (3) ID = <10360> Status = 0 0 0 0 ok 2010-Jan-07 20:30:47 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-07 20:30:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 20:30:47 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-07 20:30:47 LOG5 end_task: Level: (3) ID = <10360> Status = 0 0 0 0 ok 2010-Jan-07 20:30:47 START begin_task: Starting task 'waiting on telescope' 2010-Jan-07 20:30:47 LOG5 begin_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2010-Jan-07 20:30:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Jan-07 20:30:47 LOG3 waittrk: Start waittrk 5 2010-Jan-07 20:30:47 START begin_task: Starting task 'waiting on telescope movement' 2010-Jan-07 20:30:47 LOG5 begin_task: Level: (4) ID = <10362> Status = 0 0 0 0 ok 2010-Jan-07 20:30:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631119330.0} 2010-Jan-07 20:30:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-07 20:30:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 20:30:47 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES2082_p3_080" 2010-Jan-07 20:30:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 20:30:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 20:30:47 LOG4 got_cormsg: From DATATAKING: set ra 023003.6 2010-Jan-07 20:30:47 LOG4 got_cormsg: From DATATAKING: set dec 244942.3 2010-Jan-07 20:30:47 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-07 20:30:47 LOG4 got_cormsg: From DATATAKING: pnt tr 023003.6 244942.3 -CJ 2010-Jan-07 20:30:47 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-Jan-07 20:30:47 LOG4 got_cormsg: From DATATAKING: 023003.6 2010-Jan-07 20:30:47 LOG4 got_cormsg: From DATATAKING: vw% 244942.3 2010-Jan-07 20:30:47 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2010-Jan-07 20:30:52 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Jan-07 20:30:52 LOG5 end_task: Level: (4) ID = <10362> Status = 0 0 0 0 ok 2010-Jan-07 20:30:52 START begin_task: Starting task 'waiting on telescope on source' 2010-Jan-07 20:30:52 LOG5 begin_task: Level: (4) ID = <10363> Status = 0 0 0 0 ok 2010-Jan-07 20:30:54 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Jan-07 20:30:54 LOG5 end_task: Level: (4) ID = <10363> Status = 0 0 0 0 ok 2010-Jan-07 20:30:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-07 20:30:54 INFO2 waittrk: Now tracking AGES2082_p3_080 2010-Jan-07 20:30:54 LOG4 waittrk: Current telescope position: Az = 124.74 ZA = 11.95 2010-Jan-07 20:30:54 STOP finish_task: Finishing task 'waiting on telescope' 2010-Jan-07 20:30:54 LOG5 finish_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2010-Jan-07 20:30:54 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Jan-07 20:30:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-07 20:30:54 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Jan-07 20:30:54 LOG5 end_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2010-Jan-07 20:30:54 START begin_task: Starting task 'adjusting WAPP+Mock power' 2010-Jan-07 20:30:54 LOG5 begin_task: Level: (3) ID = <10364> Status = 0 0 0 0 ok 2010-Jan-07 20:30:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2010-Jan-07 20:30:54 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2010-Jan-07 20:30:54 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Jan-07 20:30:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Jan-07 20:30:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 20:30:54 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Jan-07 20:30:54 LOG5 begin_task: Level: (4) ID = <10365> Status = 0 0 0 0 ok 2010-Jan-07 20:30:54 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Jan-07 20:30:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-07 20:30:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 20:30:57 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-07 20:30:57 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Jan-07 20:30:57 LOG5 end_task: Level: (4) ID = <10365> Status = 0 0 0 0 ok 2010-Jan-07 20:30:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Jan-07 20:30:57 START begin_task: Starting task 'adjusting WAPP power' 2010-Jan-07 20:30:57 LOG5 begin_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2010-Jan-07 20:30:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Jan-07 20:30:57 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 20:30:57 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 20:30:58 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 20:30:58 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-07 20:30:58 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Jan-07 20:30:58 LOG5 begin_task: Level: (5) ID = <10367> Status = 0 0 0 0 ok 2010-Jan-07 20:30:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 20:30:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Jan-07 20:30:58 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 7 dB --- beam 1: 7 7 dB 2010-Jan-07 20:30:58 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 5 dB 2010-Jan-07 20:30:58 LOG5 wapp_failed: Calling 'wapp_failed 4' 2010-Jan-07 20:30:58 ERROR wapp_failed: ERROR WAPP-4 failed to complete its current task! 2010-Jan-07 20:30:58 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 4 abort' 2010-Jan-07 20:30:58 START begin_task: Starting task 'handling WAPP failure' 2010-Jan-07 20:30:58 LOG5 begin_task: Level: (6) ID = <10368> Status = 0 0 0 0 ok 2010-Jan-07 20:30:58 NOTE handle_wapp_failure: Will abort task 'running command file '100107.cmd'' since the WAPP failure preference is set to 'abort'! 2010-Jan-07 20:30:58 ALERT handle_wapp_failure: Aborting due to WAPP failure! 2010-Jan-07 20:30:58 LOG1 task_failed: Task 'handling WAPP failure' failed! 2010-Jan-07 20:30:58 LOG5 task_failed: Level: (6) ID = <10368> Status = 0 0 0 0 ok 2010-Jan-07 20:30:58 WARNING abort_task: WARNING abort requested! 2010-Jan-07 20:30:58 WARNING abort_task: WARNING Aborting handling WAPP failure 2010-Jan-07 20:30:58 WARNING abort_task: WARNING Aborting wait for handling WAPP failure 2010-Jan-07 20:30:58 STOP end_task: Finishing task 'handling WAPP failure' with status 'FAILED' 2010-Jan-07 20:30:58 LOG5 end_task: Level: (6) ID = <10368> Status = 1 0 0 1 failed 2010-Jan-07 20:30:58 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'FAILED' 2010-Jan-07 20:30:58 LOG5 end_task: Level: (5) ID = <10367> Status = 1 0 0 1 failed 2010-Jan-07 20:30:58 START begin_task: Starting task 'stopping the WAPPs' 2010-Jan-07 20:30:58 LOG5 begin_task: Level: (5) ID = <10369> Status = 1 0 0 1 failed 2010-Jan-07 20:30:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2010-Jan-07 20:30:58 INFO1 stop_wapp: Stopping the WAPPs 2010-Jan-07 20:30:58 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2010-Jan-07 20:30:58 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2010-Jan-07 20:30:58 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2010-Jan-07 20:30:58 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2010-Jan-07 20:30:58 START begin_task: Starting task 'waiting on stopping WAPPs' 2010-Jan-07 20:30:58 LOG5 begin_task: Level: (6) ID = <10370> Status = 1 0 0 1 failed 2010-Jan-07 20:30:58 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 2 3 dB --- beam 3: 4 4 dB 2010-Jan-07 20:30:58 ERROR WAPP=4-adjust_power: ERROR power adjustment failed! 2010-Jan-07 20:30:58 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'FAILED' 2010-Jan-07 20:30:58 LOG5 end_task: Level: (6) ID = <10370> Status = 1 0 0 1 failed 2010-Jan-07 20:30:58 STOP end_task: Finishing task 'stopping the WAPPs' with status 'FAILED' 2010-Jan-07 20:30:58 LOG5 end_task: Level: (5) ID = <10369> Status = 1 0 0 1 failed 2010-Jan-07 20:30:58 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Jan-07 20:30:58 LOG5 finish_task: Level: (4) ID = <10366> Status = 1 0 0 1 failed 2010-Jan-07 20:30:58 ERROR finish_task: ERROR failed adjusting: WAPP power 2010-Jan-07 20:30:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-Jan-07 20:30:58 STOP end_task: Finishing task 'adjusting WAPP power' with status 'FAILED' 2010-Jan-07 20:30:58 LOG5 end_task: Level: (4) ID = <10366> Status = 1 0 0 1 failed 2010-Jan-07 20:30:58 START begin_task: Starting task 'adjusting Mock spectrometer power' 2010-Jan-07 20:30:58 LOG5 begin_task: Level: (4) ID = <10371> Status = 1 0 0 1 failed 2010-Jan-07 20:30:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Jan-07 20:30:59 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2010-Jan-07 20:30:59 LOG5 finish_task: Level: (4) ID = <10371> Status = 1 0 0 1 failed 2010-Jan-07 20:30:59 ERROR finish_task: ERROR failed adjusting: Mock spectrometer power 2010-Jan-07 20:30:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-Jan-07 20:30:59 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'FAILED' 2010-Jan-07 20:30:59 LOG5 end_task: Level: (4) ID = <10371> Status = 1 0 0 1 failed 2010-Jan-07 20:30:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-07 20:30:59 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2010-Jan-07 20:30:59 LOG5 finish_task: Level: (3) ID = <10364> Status = 1 0 0 1 failed 2010-Jan-07 20:30:59 ERROR finish_task: ERROR failed adjusting: WAPP+Mock power levels 2010-Jan-07 20:30:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2010-Jan-07 20:30:59 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'FAILED' 2010-Jan-07 20:30:59 LOG5 end_task: Level: (3) ID = <10364> Status = 1 0 0 1 failed 2010-Jan-07 20:30:59 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-Jan-07 20:30:59 LOG5 finish_task: Level: (2) ID = <10348> Status = 1 0 0 1 failed 2010-Jan-07 20:30:59 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2010-Jan-07 20:30:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Jan-07 20:30:59 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2010-Jan-07 20:30:59 LOG5 end_task: Level: (2) ID = <10348> Status = 1 0 0 1 failed 2010-Jan-07 20:30:59 ALERT run_command_file: Stopping command file processing at line 82! 2010-Jan-07 20:30:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Jan-07 20:30:59 STOP finish_task: Finishing task 'running command file '100107.cmd'' 2010-Jan-07 20:30:59 LOG5 finish_task: Level: (1) ID = <10347> Status = 1 0 0 1 failed 2010-Jan-07 20:30:59 ERROR finish_task: ERROR failed running: command file '100107.cmd' 2010-Jan-07 20:30:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Jan-07 20:30:59 END end_task: Finishing task 'running command file '100107.cmd'' with status 'FAILED' 2010-Jan-07 20:30:59 LOG5 end_task: Level: (1) ID = <10347> Status = 1 0 0 1 failed 2010-Jan-07 20:30:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2010-Jan-07 20:30:59 INFO1 WAPP=1+2+3-adjust_power: DONE adjusting power 2010-Jan-07 20:30:59 INFO1 WAPP=1+4-wappcon: Can't abort --- the WAPP isn't running 2010-Jan-07 20:30:59 INFO1 WAPP=2+3-wappcon: Can't abort --- the WAPP isn't running 2010-Jan-07 20:31:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.000 < 0.75)! 2010-Jan-07 20:31:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 0.907 0.968 0.991 2010-Jan-07 20:31:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.046 1.103 1.109 0.921 2010-Jan-07 20:31:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.903 1.061 1.047 2010-Jan-07 20:31:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 0.000 0.000 0.000 2010-Jan-07 20:33:37 ALERT CIMA-exit_cima: Exiting CIMA ... 2010-Jan-07 20:33:37 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2010-Jan-07 20:33:37 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2010-Jan-07 20:33:37 LOG3 vw_send: To DATATAKING: mvdata a2048 2010-Jan-07 20:33:37 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2010-Jan-07 20:33:37 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2010-Jan-07 20:33:37 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2010-Jan-07 20:33:37 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2010-Jan-07 20:33:37 NOTE CIMA-exit_cima: Cleaning up session ... 2010-Jan-07 20:33:37 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2010-Jan-07 20:33:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 20:33:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-07 20:33:39 LOG3 exec_msg: Closing socket