2010-Jan-01 18:16:57 BEGIN executive: CIMA executive starting ... 2010-Jan-01 18:16:57 NOTE executive: STARTING NEW CIMA SESSION 2010-Jan-01 18:16:57 INFO1 executive: Using CIMA version 3.1.06 'smart' from 2009-11-22 11:19 2010-Jan-01 18:16:57 INFO4 executive: This is an ON-LINE session 2010-Jan-01 18:16:57 INFO4 executive: This is a REMOTE session 2010-Jan-01 18:16:57 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2010-Jan-01 18:16:57 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'ss' 2010-Jan-01 18:16:57 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20100101' 2010-Jan-01 18:16:58 LOG2 log_preferences: Currently applied preferences: 2010-Jan-01 18:16:58 LOG2 log_preferences: prefs(dailylog) = daily 2010-Jan-01 18:16:58 LOG2 log_preferences: prefs(offlinelog) = skip 2010-Jan-01 18:16:58 LOG2 log_preferences: prefs(datawindow) = ignore 2010-Jan-01 18:16:58 LOG2 log_preferences: prefs(limitwarning) = enabled 2010-Jan-01 18:16:58 LOG2 log_preferences: prefs(wappfailure) = abort 2010-Jan-01 18:16:58 LOG2 log_preferences: prefs(helpstyle) = stay-open 2010-Jan-01 18:16:58 LOG2 log_preferences: prefs(logcolours) = full 2010-Jan-01 18:16:58 LOG2 log_preferences: prefs(displaylevel) = INFO3 2010-Jan-01 18:16:58 LOG2 log_preferences: prefs(loglevel) = LOG5 2010-Jan-01 18:16:58 LOG2 log_preferences: prefs(displayformat) = short 2010-Jan-01 18:16:58 LOG2 log_preferences: prefs(logformat) = new 2010-Jan-01 18:16:58 LOG2 log_preferences: prefs(fontsize) = 4 2010-Jan-01 18:16:58 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2010-Jan-01 18:16:58 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2010-Jan-01 18:16:58 ALERT executive: CIMA executive ready 2010-Jan-01 18:17:00 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2010-Jan-01 18:17:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:17:00 LOG4 got_cormsg: From DATATAKING: setup 2010-Jan-01 18:17:04 NOTE frontend: CIMA frontend ready 2010-Jan-01 18:17:07 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2010-Jan-01 18:17:07 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2010-Jan-01 18:17:07 LOG4 got_cormsg: From DATATAKING: vw% io 2010-Jan-01 18:17:07 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2010-Jan-01 18:17:07 LOG4 got_cormsg: From DATATAKING: 2010-Jan-01 18:17:07 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2010-Jan-01 18:17:07 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2010-Jan-01 18:17:07 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2010-Jan-01 18:17:07 LOG4 got_cormsg: From DATATAKING: vw% connectall 2010-Jan-01 18:17:07 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2010-Jan-01 18:17:07 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2010-Jan-01 18:17:07 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2010-Jan-01 18:17:07 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2010-Jan-01 18:17:07 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2010-Jan-01 18:17:08 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2010-Jan-01 18:17:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:17:08 LOG4 got_cormsg: From DATATAKING: online.. exit cmd to quit. 2010-Jan-01 18:17:08 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2010-Jan-01 18:17:08 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2010-Jan-01 18:17:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:17:08 LOG4 got_cormsg: From DATATAKING: 2010-Jan-01 18:17:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:17:11 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2010-Jan-01 18:17:11 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2010-Jan-01 18:17:11 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2010-Jan-01 18:17:11 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2010-Jan-01 18:17:11 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Jan-01 18:17:11 NOTE select_receiver: Starting to select receiver ALFA 2010-Jan-01 18:17:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Jan-01 18:17:11 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Jan-01 18:17:11 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Jan-01 18:17:11 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Jan-01 18:17:11 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Jan-01 18:17:11 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Jan-01 18:17:11 DONE finish_task: DONE finished selecting: receiver ALFA 2010-Jan-01 18:17:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-01 18:17:11 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Jan-01 18:17:11 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Jan-01 18:17:11 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Jan-01 18:17:11 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Jan-01 18:17:19 LOG4 got_cormsg: From DATATAKING: waiting for turret position:26.64 2010-Jan-01 18:17:22 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-Jan-01 18:17:22 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-Jan-01 18:17:22 LOG5 restart_wapp: Calling 'restart_wapp' 2010-Jan-01 18:17:22 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-Jan-01 18:17:22 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Jan-01 18:17:22 NOTE restart_wapp: Restarting all WAPPs 2010-Jan-01 18:17:22 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-Jan-01 18:17:22 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-Jan-01 18:17:22 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Jan-01 18:17:22 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Jan-01 18:17:25 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-Jan-01 18:17:25 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-Jan-01 18:17:25 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-Jan-01 18:17:25 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-Jan-01 18:17:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:17:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:18:11 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc.cmd' 2010-Jan-01 18:18:13 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc.cmd' to executive ... 2010-Jan-01 18:18:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_ages.conf} 2010-Jan-01 18:18:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2010-Jan-01 18:18:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2010-Jan-01 18:18:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2010-Jan-01 18:18:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2010-Jan-01 18:18:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2010-Jan-01 18:18:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2010-Jan-01 18:18:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2010-Jan-01 18:18:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2010-Jan-01 18:18:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2010-Jan-01 18:18:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2010-Jan-01 18:18:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2010-Jan-01 18:18:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2010-Jan-01 18:18:13 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Jan-01 18:18:13 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 13 2010-Jan-01 18:18:13 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 13' 2010-Jan-01 18:18:13 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2010-Jan-01 18:18:13 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Jan-01 18:18:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2010-Jan-01 18:18:13 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2010-Jan-01 18:18:13 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2010-Jan-01 18:18:14 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Jan-01 18:18:24 ERROR execute_load: ERROR can't use the IF/LO file 'togs_ages.conf'! 2010-Jan-01 18:18:24 LOG1 task_failed: Task 'running command file 'command_galfasrc.cmd'' failed! 2010-Jan-01 18:18:24 LOG5 task_failed: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Jan-01 18:18:24 ALERT run_command_file: Stopping command file processing at line 5! 2010-Jan-01 18:18:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Jan-01 18:18:24 STOP finish_task: Finishing task 'running command file 'command_galfasrc.cmd'' 2010-Jan-01 18:18:24 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 1 failed 2010-Jan-01 18:18:24 ERROR finish_task: ERROR failed running: command file 'command_galfasrc.cmd' 2010-Jan-01 18:18:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2010-Jan-01 18:18:24 END end_task: Finishing task 'running command file 'command_galfasrc.cmd'' with status 'FAILED' 2010-Jan-01 18:18:24 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 1 failed 2010-Jan-01 18:18:44 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc_cima31.cmd' 2010-Jan-01 18:18:47 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc_cima31.cmd' to executive ... 2010-Jan-01 18:18:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima31.conf} 2010-Jan-01 18:18:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2010-Jan-01 18:18:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2010-Jan-01 18:18:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2010-Jan-01 18:18:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2010-Jan-01 18:18:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2010-Jan-01 18:18:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2010-Jan-01 18:18:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2010-Jan-01 18:18:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2010-Jan-01 18:18:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2010-Jan-01 18:18:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2010-Jan-01 18:18:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2010-Jan-01 18:18:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2010-Jan-01 18:18:47 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Jan-01 18:18:47 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc_cima31.cmd 1 1 13 2010-Jan-01 18:18:47 LOG4 run_command_file: Calling 'run_command_file command_galfasrc_cima31.cmd 1 1 13' 2010-Jan-01 18:18:47 BEGIN begin_task: Starting task 'running command file 'command_galfasrc_cima31.cmd'' 2010-Jan-01 18:18:47 LOG5 begin_task: Level: (1) ID = <10004> Status = 0 0 0 0 ok 2010-Jan-01 18:18:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc_cima31.cmd' ...} 2010-Jan-01 18:18:47 NOTE run_command_file: Starting execution of command file 'command_galfasrc_cima31.cmd' from line 1 2010-Jan-01 18:18:48 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima31.conf' 2010-Jan-01 18:18:48 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Jan-01 18:18:48 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-01 18:18:48 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Jan-01 18:18:48 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2010-Jan-01 18:18:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Jan-01 18:18:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Jan-01 18:18:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Jan-01 18:18:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Jan-01 18:18:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Jan-01 18:18:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-Jan-01 18:18:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Jan-01 18:18:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2010-Jan-01 18:18:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2010-Jan-01 18:18:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2010-Jan-01 18:18:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2010-Jan-01 18:18:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2010-Jan-01 18:18:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2010-Jan-01 18:18:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2010-Jan-01 18:18:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2010-Jan-01 18:18:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2010-Jan-01 18:18:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Jan-01 18:18:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Jan-01 18:18:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Jan-01 18:18:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Jan-01 18:18:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Jan-01 18:18:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Jan-01 18:18:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Jan-01 18:18:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Jan-01 18:18:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Jan-01 18:18:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Jan-01 18:18:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Jan-01 18:18:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Jan-01 18:18:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Jan-01 18:18:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Jan-01 18:18:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Jan-01 18:18:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Jan-01 18:18:50 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-01 18:18:50 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Jan-01 18:18:50 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2010-Jan-01 18:18:50 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Jan-01 18:18:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Jan-01 18:18:50 INFO1 config_iflo: Selecting receiver ALFA 2010-Jan-01 18:18:50 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2010-Jan-01 18:18:50 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2010-Jan-01 18:18:50 START begin_task: Starting task 'selecting receiver ALFA' 2010-Jan-01 18:18:50 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-Jan-01 18:18:50 NOTE select_receiver: Starting to select receiver ALFA 2010-Jan-01 18:18:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Jan-01 18:18:50 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Jan-01 18:18:50 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Jan-01 18:18:50 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Jan-01 18:18:50 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Jan-01 18:18:50 LOG5 finish_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-Jan-01 18:18:50 INFO2 finish_task: DONE finished selecting: receiver ALFA 2010-Jan-01 18:18:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-01 18:18:50 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Jan-01 18:18:50 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-Jan-01 18:18:50 START begin_task: Starting task 'waiting for receiver ALFA' 2010-Jan-01 18:18:50 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-Jan-01 18:18:50 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2010-Jan-01 18:18:50 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-Jan-01 18:18:50 INFO1 config_iflo: Configuring rest of the IF/LO path 2010-Jan-01 18:18:50 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2010-Jan-01 18:18:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-01 18:18:50 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-01 18:18:50 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-01 18:18:50 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-Jan-01 18:18:50 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-01 18:18:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-01 18:18:50 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-Jan-01 18:18:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-01 18:18:50 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-01 18:18:50 LOG3 vw_send: To DATATAKING: alfafb 1 2010-Jan-01 18:18:50 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2010-Jan-01 18:18:50 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Jan-01 18:18:50 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Jan-01 18:18:50 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2010-Jan-01 18:18:50 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2010-Jan-01 18:18:50 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2010-Jan-01 18:18:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Jan-01 18:18:50 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2010-Jan-01 18:18:50 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2010-Jan-01 18:18:50 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Jan-01 18:18:50 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Jan-01 18:18:50 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Jan-01 18:18:50 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Jan-01 18:18:50 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Jan-01 18:18:50 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2010-Jan-01 18:18:50 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2010-Jan-01 18:18:50 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2010-Jan-01 18:18:50 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2010-Jan-01 18:18:50 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Jan-01 18:18:50 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2010-Jan-01 18:18:50 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Jan-01 18:18:50 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Jan-01 18:18:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:18:50 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Jan-01 18:18:50 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2010-Jan-01 18:18:51 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Jan-01 18:18:51 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2010-Jan-01 18:18:51 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2010-Jan-01 18:18:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Jan-01 18:18:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:18:51 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Jan-01 18:18:51 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2010-Jan-01 18:18:51 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Jan-01 18:18:51 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Jan-01 18:18:51 LOG4 got_cormsg: From DATATAKING: alfafb 1 2010-Jan-01 18:18:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2010-Jan-01 18:18:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2010-Jan-01 18:18:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2010-Jan-01 18:18:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2010-Jan-01 18:18:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Jan-01 18:18:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2010-Jan-01 18:18:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2010-Jan-01 18:18:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2010-Jan-01 18:18:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2010-Jan-01 18:18:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2010-Jan-01 18:18:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2010-Jan-01 18:18:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Jan-01 18:18:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2010-Jan-01 18:18:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Jan-01 18:18:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:18:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Jan-01 18:18:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2010-Jan-01 18:18:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2010-Jan-01 18:18:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2010-Jan-01 18:18:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:18:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:18:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:18:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:18:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:18:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:18:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:19:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:19:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:19:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:19:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:19:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:19:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:19:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:19:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:19:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:19:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:19:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:19:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:19:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:19:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:19:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:19:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:19:07 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-01 18:19:07 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Jan-01 18:19:07 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2010-Jan-01 18:19:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Jan-01 18:19:07 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Jan-01 18:19:07 LOG5 finish_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2010-Jan-01 18:19:07 DONE finish_task: DONE finished configuration: IF/LO path 2010-Jan-01 18:19:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-01 18:19:07 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Jan-01 18:19:07 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2010-Jan-01 18:19:07 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Jan-01 18:19:07 LOG5 begin_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2010-Jan-01 18:19:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Jan-01 18:19:07 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Jan-01 18:19:07 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Jan-01 18:19:07 START begin_task: Starting task 'selecting calibration port' 2010-Jan-01 18:19:07 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2010-Jan-01 18:19:07 LOG3 vw_send: To DATATAKING: calport 3 2010-Jan-01 18:19:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Jan-01 18:19:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:19:07 START begin_task: Starting task 'waiting on calport' 2010-Jan-01 18:19:07 LOG5 begin_task: Level: (4) ID = <10012> Status = 0 0 0 0 ok 2010-Jan-01 18:19:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:19:07 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Jan-01 18:19:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:19:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:19:07 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-01 18:19:07 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Jan-01 18:19:07 LOG5 end_task: Level: (4) ID = <10012> Status = 0 0 0 0 ok 2010-Jan-01 18:19:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Jan-01 18:19:07 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Jan-01 18:19:07 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2010-Jan-01 18:19:07 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-01 18:19:07 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-01 18:19:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-01 18:19:07 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-Jan-01 18:19:07 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-01 18:19:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:19:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-01 18:19:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-01 18:19:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-01 18:19:07 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-Jan-01 18:19:07 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Jan-01 18:19:07 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Jan-01 18:19:07 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Jan-01 18:19:07 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Jan-01 18:19:07 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Jan-01 18:19:07 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Jan-01 18:19:07 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Jan-01 18:19:07 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Jan-01 18:19:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2010-Jan-01 18:19:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2010-Jan-01 18:19:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2010-Jan-01 18:19:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2010-Jan-01 18:19:07 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Jan-01 18:19:07 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Jan-01 18:19:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-01 18:19:07 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2010-Jan-01 18:19:08 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-01 18:19:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-01 18:19:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-01 18:19:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-01 18:19:08 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2010-Jan-01 18:19:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2010-Jan-01 18:19:08 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2010-Jan-01 18:19:08 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2010-Jan-01 18:19:08 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2010-Jan-01 18:19:08 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Jan-01 18:19:08 LOG5 finish_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2010-Jan-01 18:19:08 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Jan-01 18:19:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-01 18:19:08 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Jan-01 18:19:08 LOG5 end_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2010-Jan-01 18:19:08 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2010-Jan-01 18:19:08 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2010-Jan-01 18:19:08 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2010-Jan-01 18:19:08 LOG3 is_if_valid: Current source data: up 213.3 14.5 UP - - 105 3.9 2010-Jan-01 18:19:08 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2010-Jan-01 18:19:08 INFO5 is_if_valid: Condition parsed as: 1 2010-Jan-01 18:19:08 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2010-Jan-01 18:19:08 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2010-Jan-01 18:19:08 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2010-Jan-01 18:19:08 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2010-Jan-01 18:19:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2010-Jan-01 18:19:08 LOG3 track_source: Calling 'track_source galfasrc 011400.0 +301130 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2010-Jan-01 18:19:08 START begin_task: Starting task 'sending tracking commands' 2010-Jan-01 18:19:08 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Jan-01 18:19:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2010-Jan-01 18:19:08 INFO1 track_source: Starting to track galfasrc 2010-Jan-01 18:19:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2010-Jan-01 18:19:08 LOG3 vw_send: To DATATAKING: set ra 011400.0 2010-Jan-01 18:19:09 LOG3 vw_send: To DATATAKING: set dec +301130 2010-Jan-01 18:19:09 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-01 18:19:09 LOG3 vw_send: To DATATAKING: pnt tr 011400.0 +301130 -CJ 2010-Jan-01 18:19:09 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Jan-01 18:19:09 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-01 18:19:09 LOG5 finish_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Jan-01 18:19:09 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-01 18:19:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-01 18:19:09 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-01 18:19:09 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Jan-01 18:19:09 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2010-Jan-01 18:19:09 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2010-Jan-01 18:19:09 DONE finish_task: DONE finished tracking: source 'galfasrc' 2010-Jan-01 18:19:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-01 18:19:09 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2010-Jan-01 18:19:09 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2010-Jan-01 18:19:09 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2010-Jan-01 18:19:09 INFO1 run_command_line: Skipping line 'ELSEIF isup(galfasrc2) then' since an earlier condition already has been true 2010-Jan-01 18:19:09 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2010-Jan-01 18:19:09 INFO1 run_command_line: Skipping line 'GOTO galfasrc2' in non-true conditional branch 2010-Jan-01 18:19:09 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2010-Jan-01 18:19:09 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2010-Jan-01 18:19:09 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2010-Jan-01 18:19:09 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2010-Jan-01 18:19:09 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2010-Jan-01 18:19:09 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2010-Jan-01 18:19:09 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2010-Jan-01 18:19:09 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2010-Jan-01 18:19:09 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2010-Jan-01 18:19:09 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Jan-01 18:19:09 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2010-Jan-01 18:19:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Jan-01 18:19:09 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Jan-01 18:19:09 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-Jan-01 18:19:09 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Jan-01 18:19:09 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Jan-01 18:19:09 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2010-Jan-01 18:19:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2010-Jan-01 18:19:09 NOTE WAPPDATA-new_file: New FITS file: wapp.20100101.a2048.0000.fits 2010-Jan-01 18:19:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2010-Jan-01 18:19:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Jan-01 18:19:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Jan-01 18:19:09 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20100101.a2048.0000.fits} 2010-Jan-01 18:19:09 LOG4 got_cormsg: From DATATAKING: set ra 011400.0 2010-Jan-01 18:19:09 LOG4 got_cormsg: From DATATAKING: set dec +301130 2010-Jan-01 18:19:09 LOG4 got_cormsg: From DATATAKING: vw% 011400.0 2010-Jan-01 18:19:09 LOG4 got_cormsg: From DATATAKING: vw% +301130 2010-Jan-01 18:19:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:19:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-01 18:19:09 LOG4 got_cormsg: From DATATAKING: pnt tr 011400.0 +301130 -CJ 2010-Jan-01 18:19:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Jan-01 18:19:09 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Jan-01 18:19:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:19:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2010-Jan-01 18:19:21 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Jan-01 18:19:21 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Jan-01 18:19:21 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Jan-01 18:19:21 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2010-Jan-01 18:19:21 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Jan-01 18:19:21 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Jan-01 18:19:21 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2010-Jan-01 18:19:21 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Jan-01 18:19:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-01 18:19:21 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Jan-01 18:19:21 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2010-Jan-01 18:19:21 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2010-Jan-01 18:19:21 BEGIN begin_task: Starting task 'waiting on telescope' 2010-Jan-01 18:19:21 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Jan-01 18:19:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Jan-01 18:19:21 LOG3 waittrk: Start waittrk 5 2010-Jan-01 18:19:21 START begin_task: Starting task 'waiting on telescope movement' 2010-Jan-01 18:19:21 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Jan-01 18:19:26 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Jan-01 18:19:26 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Jan-01 18:19:26 START begin_task: Starting task 'waiting on telescope on source' 2010-Jan-01 18:19:26 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-Jan-01 18:23:14 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Jan-01 18:23:14 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-Jan-01 18:23:14 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Jan-01 18:23:14 INFO2 waittrk: Now tracking galfasrc 2010-Jan-01 18:23:15 LOG4 waittrk: Current telescope position: Az = 209.94 ZA = 14.03 2010-Jan-01 18:23:15 STOP finish_task: Finishing task 'waiting on telescope' 2010-Jan-01 18:23:15 LOG5 finish_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Jan-01 18:23:15 DONE finish_task: DONE finished waiting: telescope on source 2010-Jan-01 18:23:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-01 18:23:15 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Jan-01 18:23:15 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Jan-01 18:23:15 COMMAND run_command_line: EXECUTING command 20: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2010-Jan-01 18:23:15 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2010-Jan-01 18:23:16 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-01 18:23:16 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2010-Jan-01 18:23:16 BEGIN begin_task: Starting task 'smart frequency switching' 2010-Jan-01 18:23:16 LOG5 begin_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2010-Jan-01 18:23:16 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2010-Jan-01 18:23:16 INFO1 smartfreq: Starting pattern: Smart frequency switching 2010-Jan-01 18:23:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2010-Jan-01 18:23:16 START begin_task: Starting task 'selecting calibration type' 2010-Jan-01 18:23:16 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2010-Jan-01 18:23:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-01 18:23:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-01 18:23:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:23:16 START begin_task: Starting task 'waiting on setcal' 2010-Jan-01 18:23:16 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2010-Jan-01 18:23:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-01 18:23:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:23:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:23:16 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-01 18:23:16 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-01 18:23:16 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2010-Jan-01 18:23:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-01 18:23:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-01 18:23:16 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-01 18:23:16 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-01 18:23:16 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2010-Jan-01 18:23:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:23:16 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-01 18:23:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-01 18:23:16 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2010-Jan-01 18:23:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-01 18:23:16 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-01 18:23:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-01 18:23:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-01 18:23:16 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-01 18:23:16 LOG5 begin_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2010-Jan-01 18:23:16 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-01 18:23:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-01 18:23:16 LOG5 end_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2010-Jan-01 18:23:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-01 18:23:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-01 18:23:16 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-01 18:23:16 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2010-Jan-01 18:23:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2010-Jan-01 18:23:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2010-Jan-01 18:23:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2010-Jan-01 18:23:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2010-Jan-01 18:23:16 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20100101.a2048.0000.fits' is empty! 2010-Jan-01 18:23:16 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2010-Jan-01 18:23:16 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-Jan-01 18:23:16 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Jan-01 18:23:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-01 18:23:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-01 18:23:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-01 18:23:16 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Jan-01 18:23:16 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-01 18:23:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-01 18:23:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-01 18:23:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-01 18:23:17 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Jan-01 18:23:17 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Jan-01 18:23:17 START begin_task: Starting task 'adjusting WAPP power' 2010-Jan-01 18:23:17 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-Jan-01 18:23:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Jan-01 18:23:17 INFO2 adjust_power: Starting to adjust WAPP power 2010-Jan-01 18:23:17 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Jan-01 18:23:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Jan-01 18:23:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:23:17 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Jan-01 18:23:17 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2010-Jan-01 18:23:17 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Jan-01 18:23:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2010-Jan-01 18:23:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:23:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:23:20 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-01 18:23:20 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Jan-01 18:23:20 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2010-Jan-01 18:23:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Jan-01 18:23:20 START begin_task: Starting task 'adjusting WAPP power' 2010-Jan-01 18:23:20 LOG5 begin_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2010-Jan-01 18:23:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Jan-01 18:23:20 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-01 18:23:20 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-01 18:23:20 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-01 18:23:20 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-01 18:23:20 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Jan-01 18:23:20 LOG5 begin_task: Level: (5) ID = <10031> Status = 0 0 0 0 ok 2010-Jan-01 18:23:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Jan-01 18:23:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:23:21 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-Jan-01 18:23:21 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 4 dB 2010-Jan-01 18:23:21 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 1 3 dB --- beam 3: 4 3 dB 2010-Jan-01 18:23:21 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 1 dB --- beam 7: 3 1 dB 2010-Jan-01 18:23:21 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Jan-01 18:23:21 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Jan-01 18:23:21 LOG5 end_task: Level: (5) ID = <10031> Status = 0 0 0 0 ok 2010-Jan-01 18:23:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.996 0.934 ALFA beam 1: 1.098 1.079 2010-Jan-01 18:23:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.027 0.907 ALFA beam 3: 0.930 0.999 2010-Jan-01 18:23:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.915 0.952 ALFA beam 5: 0.985 0.993 2010-Jan-01 18:23:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.939 0.871 ALFA beam 7: 1.046 1.066 2010-Jan-01 18:23:21 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Jan-01 18:23:21 LOG5 finish_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2010-Jan-01 18:23:21 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Jan-01 18:23:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-01 18:23:21 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Jan-01 18:23:21 LOG5 end_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2010-Jan-01 18:23:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-01 18:23:21 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Jan-01 18:23:21 LOG5 finish_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-Jan-01 18:23:21 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Jan-01 18:23:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-01 18:23:21 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Jan-01 18:23:21 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-Jan-01 18:23:21 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2010-Jan-01 18:23:21 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-Jan-01 18:23:21 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-Jan-01 18:23:21 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:23:21 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:23:21 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:23:21 LOG2 antvel: Parameters to Doppler: Topocentric 80600 2010 1 0.0 2010-Jan-01 18:23:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:23:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-Jan-01 18:23:21 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-Jan-01 18:23:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:23:21 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:23:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Jan-01 18:23:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:23:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2010-Jan-01 18:23:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:23:21 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2010-Jan-01 18:23:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2010-Jan-01 18:23:21 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.702528 2010.0048356022003 18.999933 2010-Jan-01 18:23:21 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333333 30.191666666666670 2010-Jan-01 18:23:21 LOG4 log_alfabeam: ALFABEAM 1 1.229981416428538 30.094840571526028 2010-Jan-01 18:23:21 LOG4 log_alfabeam: ALFABEAM 2 1.237377218006773 30.114815056079820 2010-Jan-01 18:23:21 LOG4 log_alfabeam: ALFABEAM 3 1.240767659096140 30.211434656852024 2010-Jan-01 18:23:21 LOG4 log_alfabeam: ALFABEAM 4 1.236674477457140 30.288597474069714 2010-Jan-01 18:23:21 LOG4 log_alfabeam: ALFABEAM 5 1.229233738789890 30.268286575260021 2010-Jan-01 18:23:21 LOG4 log_alfabeam: ALFABEAM 6 1.225931291885318 30.171152611760657 2010-Jan-01 18:23:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 000100001 2010-Jan-01 18:23:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:23:22 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2010-Jan-01 18:23:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:23:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Jan-01 18:23:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:23:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:23:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:23:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-Jan-01 18:23:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80603.00 2010-Jan-01 18:23:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:23:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:23:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:23:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:23:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:23:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:23:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:23:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:23:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:23:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:23:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:23:33 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2010-Jan-01 18:23:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:23:33 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2010-Jan-01 18:23:33 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2010-Jan-01 18:23:33 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-Jan-01 18:23:33 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-Jan-01 18:23:33 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:23:33 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:23:33 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:23:33 LOG2 antvel: Parameters to Doppler: Topocentric 80613 2010 1 0.0 2010-Jan-01 18:23:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:23:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-Jan-01 18:23:33 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-Jan-01 18:23:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:23:33 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:23:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Jan-01 18:23:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:23:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2010-Jan-01 18:23:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:23:33 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2010-Jan-01 18:23:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2010-Jan-01 18:23:33 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.706149 2010.0048360141454 18.999933 2010-Jan-01 18:23:33 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333332 30.191666666666670 2010-Jan-01 18:23:33 LOG4 log_alfabeam: ALFABEAM 1 1.230005457560565 30.094701173219995 2010-Jan-01 18:23:33 LOG4 log_alfabeam: ALFABEAM 2 1.237396236046653 30.114984184829471 2010-Jan-01 18:23:33 LOG4 log_alfabeam: ALFABEAM 3 1.240762746944496 30.211744477033399 2010-Jan-01 18:23:33 LOG4 log_alfabeam: ALFABEAM 4 1.236650334052468 30.288736658719127 2010-Jan-01 18:23:33 LOG4 log_alfabeam: ALFABEAM 5 1.229214660778324 30.268114723195502 2010-Jan-01 18:23:33 LOG4 log_alfabeam: ALFABEAM 6 1.225936467329052 30.170842887212036 2010-Jan-01 18:23:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32770 2010-Jan-01 18:23:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:23:34 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2010-Jan-01 18:23:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:23:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Jan-01 18:23:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:23:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:23:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:23:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-Jan-01 18:23:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80615.00 2010-Jan-01 18:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:23:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:23:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:23:45 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2010-Jan-01 18:23:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:23:45 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2010-Jan-01 18:23:45 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2010-Jan-01 18:23:45 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-Jan-01 18:23:45 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-Jan-01 18:23:45 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:23:45 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:23:45 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:23:45 LOG2 antvel: Parameters to Doppler: Topocentric 80625 2010 1 0.0 2010-Jan-01 18:23:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:23:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-Jan-01 18:23:45 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-Jan-01 18:23:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:23:45 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:23:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Jan-01 18:23:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:23:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2010-Jan-01 18:23:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:23:45 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2010-Jan-01 18:23:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2010-Jan-01 18:23:45 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.709491 2010.0048363944024 18.999933 2010-Jan-01 18:23:45 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333323 30.191666666666677 2010-Jan-01 18:23:45 LOG4 log_alfabeam: ALFABEAM 1 1.230027750911608 30.094572982422537 2010-Jan-01 18:23:45 LOG4 log_alfabeam: ALFABEAM 2 1.237413809931255 30.115141508502244 2010-Jan-01 18:23:45 LOG4 log_alfabeam: ALFABEAM 3 1.240758129526897 30.212031196599721 2010-Jan-01 18:23:45 LOG4 log_alfabeam: ALFABEAM 4 1.236627945949128 30.288864645610282 2010-Jan-01 18:23:45 LOG4 log_alfabeam: ALFABEAM 5 1.229197032626191 30.267954873587108 2010-Jan-01 18:23:45 LOG4 log_alfabeam: ALFABEAM 6 1.225941328492160 30.170556273390435 2010-Jan-01 18:23:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32771 2010-Jan-01 18:23:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:23:46 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-Jan-01 18:23:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:23:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Jan-01 18:23:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:23:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:23:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:23:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-Jan-01 18:23:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80627.00 2010-Jan-01 18:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:23:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:23:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:23:57 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-Jan-01 18:23:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:23:57 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2010-Jan-01 18:23:57 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2010-Jan-01 18:23:57 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-Jan-01 18:23:57 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-Jan-01 18:23:57 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:23:57 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:23:57 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:23:57 LOG2 antvel: Parameters to Doppler: Topocentric 80637 2010 1 0.0 2010-Jan-01 18:23:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:23:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-Jan-01 18:23:57 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-Jan-01 18:23:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:23:57 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:23:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Jan-01 18:23:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:23:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2010-Jan-01 18:23:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:23:57 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2010-Jan-01 18:23:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2010-Jan-01 18:23:57 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.712834 2010.0048367746597 18.999933 2010-Jan-01 18:23:57 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333332 30.191666666666677 2010-Jan-01 18:23:57 LOG4 log_alfabeam: ALFABEAM 1 1.230050151518207 30.094445210949875 2010-Jan-01 18:23:57 LOG4 log_alfabeam: ALFABEAM 2 1.237431408950611 30.115300062591249 2010-Jan-01 18:23:57 LOG4 log_alfabeam: ALFABEAM 3 1.240753429678960 30.212318738799862 2010-Jan-01 18:23:57 LOG4 log_alfabeam: ALFABEAM 4 1.236605450219172 30.288992206616467 2010-Jan-01 18:23:57 LOG4 log_alfabeam: ALFABEAM 5 1.229179380377702 30.267793780890432 2010-Jan-01 18:23:57 LOG4 log_alfabeam: ALFABEAM 6 1.225946272860627 30.170268853920543 2010-Jan-01 18:23:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32772 2010-Jan-01 18:23:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:23:58 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2010-Jan-01 18:23:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:23:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Jan-01 18:23:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:23:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:23:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:23:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-Jan-01 18:23:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80639.00 2010-Jan-01 18:24:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:24:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:24:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:24:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:24:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:24:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:24:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:24:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:24:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:24:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:24:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:24:09 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2010-Jan-01 18:24:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:24:09 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2010-Jan-01 18:24:09 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2010-Jan-01 18:24:09 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-Jan-01 18:24:09 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-Jan-01 18:24:09 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:24:09 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:24:09 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:24:09 LOG2 antvel: Parameters to Doppler: Topocentric 80649 2010 1 0.0 2010-Jan-01 18:24:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:24:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-Jan-01 18:24:09 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-Jan-01 18:24:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:24:09 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:24:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Jan-01 18:24:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:24:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2010-Jan-01 18:24:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:24:09 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2010-Jan-01 18:24:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2010-Jan-01 18:24:09 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.716176 2010.0048371549167 18.999933 2010-Jan-01 18:24:09 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333331 30.191666666666670 2010-Jan-01 18:24:09 LOG4 log_alfabeam: ALFABEAM 1 1.230072646097950 30.094317944449429 2010-Jan-01 18:24:09 LOG4 log_alfabeam: ALFABEAM 2 1.237449022102947 30.115459757618467 2010-Jan-01 18:24:09 LOG4 log_alfabeam: ALFABEAM 3 1.240748649610555 30.212606927813884 2010-Jan-01 18:24:09 LOG4 log_alfabeam: ALFABEAM 4 1.236582860204773 30.289119256164650 2010-Jan-01 18:24:09 LOG4 log_alfabeam: ALFABEAM 5 1.229161715080448 30.267631536147068 2010-Jan-01 18:24:09 LOG4 log_alfabeam: ALFABEAM 6 1.225951298069542 30.169980804710509 2010-Jan-01 18:24:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32773 2010-Jan-01 18:24:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:24:10 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2010-Jan-01 18:24:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:24:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Jan-01 18:24:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:24:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:24:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:24:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-Jan-01 18:24:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80651.00 2010-Jan-01 18:24:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:24:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:24:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:24:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:24:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:24:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:24:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:24:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:24:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:24:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:24:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:24:21 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2010-Jan-01 18:24:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:24:21 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2010-Jan-01 18:24:21 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2010-Jan-01 18:24:21 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-Jan-01 18:24:21 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-Jan-01 18:24:21 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:24:21 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:24:21 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:24:21 LOG2 antvel: Parameters to Doppler: Topocentric 80661 2010 1 0.0 2010-Jan-01 18:24:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:24:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-Jan-01 18:24:21 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-Jan-01 18:24:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:24:21 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:24:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Jan-01 18:24:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:24:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2010-Jan-01 18:24:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:24:21 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2010-Jan-01 18:24:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2010-Jan-01 18:24:21 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.719519 2010.0048375351737 18.999933 2010-Jan-01 18:24:21 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333325 30.191666666666688 2010-Jan-01 18:24:21 LOG4 log_alfabeam: ALFABEAM 1 1.230095248224496 30.094191116039191 2010-Jan-01 18:24:21 LOG4 log_alfabeam: ALFABEAM 2 1.237466659448337 30.115620694496148 2010-Jan-01 18:24:21 LOG4 log_alfabeam: ALFABEAM 3 1.240743785858785 30.212895932203168 2010-Jan-01 18:24:21 LOG4 log_alfabeam: ALFABEAM 4 1.236560162278140 30.289245860955575 2010-Jan-01 18:24:21 LOG4 log_alfabeam: ALFABEAM 5 1.229144026657200 30.267468036965848 2010-Jan-01 18:24:21 LOG4 log_alfabeam: ALFABEAM 6 1.225956407719554 30.169691957444456 2010-Jan-01 18:24:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32774 2010-Jan-01 18:24:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:24:22 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2010-Jan-01 18:24:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:24:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Jan-01 18:24:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:24:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:24:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:24:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-Jan-01 18:24:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80663.00 2010-Jan-01 18:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:24:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:24:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:24:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:24:33 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2010-Jan-01 18:24:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:24:33 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2010-Jan-01 18:24:33 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2010-Jan-01 18:24:33 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-Jan-01 18:24:33 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-Jan-01 18:24:33 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:24:33 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:24:33 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:24:33 LOG2 antvel: Parameters to Doppler: Topocentric 80673 2010 1 0.0 2010-Jan-01 18:24:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:24:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-Jan-01 18:24:33 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-Jan-01 18:24:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:24:33 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:24:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Jan-01 18:24:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:24:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2010-Jan-01 18:24:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:24:33 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2010-Jan-01 18:24:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2010-Jan-01 18:24:33 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.722861 2010.0048379154307 18.999933 2010-Jan-01 18:24:33 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333334 30.191666666666670 2010-Jan-01 18:24:33 LOG4 log_alfabeam: ALFABEAM 1 1.230117944480289 30.094064810941806 2010-Jan-01 18:24:33 LOG4 log_alfabeam: ALFABEAM 2 1.237484309947343 30.115782782243816 2010-Jan-01 18:24:33 LOG4 log_alfabeam: ALFABEAM 3 1.240738840731308 30.213185575054585 2010-Jan-01 18:24:33 LOG4 log_alfabeam: ALFABEAM 4 1.236537369917194 30.289371935849104 2010-Jan-01 18:24:33 LOG4 log_alfabeam: ALFABEAM 5 1.229126326191999 30.267303375909336 2010-Jan-01 18:24:33 LOG4 log_alfabeam: ALFABEAM 6 1.225961599346740 30.169402489103053 2010-Jan-01 18:24:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32775 2010-Jan-01 18:24:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:24:34 LOG5 begin_task: Level: (4) ID = <10045> Status = 0 0 0 0 ok 2010-Jan-01 18:24:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:24:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Jan-01 18:24:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:24:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:24:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:24:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-Jan-01 18:24:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80675.00 2010-Jan-01 18:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:24:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:24:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:24:45 LOG5 end_task: Level: (4) ID = <10045> Status = 0 0 0 0 ok 2010-Jan-01 18:24:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:24:45 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2010-Jan-01 18:24:45 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-Jan-01 18:24:45 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-01 18:24:45 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-01 18:24:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-01 18:24:45 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2010-Jan-01 18:24:45 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-01 18:24:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-01 18:24:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-01 18:24:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-01 18:24:45 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2010-Jan-01 18:24:45 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2010-Jan-01 18:24:45 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-Jan-01 18:24:45 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-Jan-01 18:24:45 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:24:45 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:24:45 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:24:45 LOG2 antvel: Parameters to Doppler: Topocentric 80685 2010 1 0.0 2010-Jan-01 18:24:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:24:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-Jan-01 18:24:45 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-Jan-01 18:24:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:24:45 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:24:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Jan-01 18:24:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:24:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2010-Jan-01 18:24:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:24:45 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2010-Jan-01 18:24:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2010-Jan-01 18:24:45 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.726204 2010.0048382956879 18.999933 2010-Jan-01 18:24:45 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333327 30.191666666666677 2010-Jan-01 18:24:45 LOG4 log_alfabeam: ALFABEAM 1 1.230140748544771 30.093938962989203 2010-Jan-01 18:24:45 LOG4 log_alfabeam: ALFABEAM 2 1.237501983667601 30.115946123125731 2010-Jan-01 18:24:45 LOG4 log_alfabeam: ALFABEAM 3 1.240733810666337 30.213476025578995 2010-Jan-01 18:24:45 LOG4 log_alfabeam: ALFABEAM 4 1.236514469388048 30.289497546824482 2010-Jan-01 18:24:45 LOG4 log_alfabeam: ALFABEAM 5 1.229108603601412 30.267137449224585 2010-Jan-01 18:24:45 LOG4 log_alfabeam: ALFABEAM 6 1.225966876650981 30.169112230741590 2010-Jan-01 18:24:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32776 2010-Jan-01 18:24:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:24:46 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2010-Jan-01 18:24:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:24:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Jan-01 18:24:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:24:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:24:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:24:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-Jan-01 18:24:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80687.00 2010-Jan-01 18:24:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:24:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:24:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:24:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:24:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:24:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:24:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:24:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:24:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:24:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:24:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:24:57 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2010-Jan-01 18:24:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:24:57 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2010-Jan-01 18:24:57 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2010-Jan-01 18:24:57 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-Jan-01 18:24:57 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-Jan-01 18:24:57 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:24:57 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:24:57 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:24:57 LOG2 antvel: Parameters to Doppler: Topocentric 80697 2010 1 0.0 2010-Jan-01 18:24:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:24:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-Jan-01 18:24:57 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-Jan-01 18:24:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:24:57 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:24:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Jan-01 18:24:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:24:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2010-Jan-01 18:24:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:24:57 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2010-Jan-01 18:24:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2010-Jan-01 18:24:57 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.729546 2010.0048386759449 18.999933 2010-Jan-01 18:24:57 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333323 30.191666666666674 2010-Jan-01 18:24:57 LOG4 log_alfabeam: ALFABEAM 1 1.230163646864470 30.093813656954882 2010-Jan-01 18:24:57 LOG4 log_alfabeam: ALFABEAM 2 1.237519669533114 30.116110624640250 2010-Jan-01 18:24:57 LOG4 log_alfabeam: ALFABEAM 3 1.240728698071150 30.213767105775759 2010-Jan-01 18:24:57 LOG4 log_alfabeam: ALFABEAM 4 1.236491474305138 30.289622609199061 2010-Jan-01 18:24:57 LOG4 log_alfabeam: ALFABEAM 5 1.229090870004849 30.266970351013818 2010-Jan-01 18:24:57 LOG4 log_alfabeam: ALFABEAM 6 1.225972237067508 30.168821360407183 2010-Jan-01 18:24:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32777 2010-Jan-01 18:24:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:24:58 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2010-Jan-01 18:24:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:24:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Jan-01 18:24:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:24:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:24:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:24:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-Jan-01 18:24:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80699.00 2010-Jan-01 18:25:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:25:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:25:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:25:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:25:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:25:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:25:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:25:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:25:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:25:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:25:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:25:09 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2010-Jan-01 18:25:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:25:09 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2010-Jan-01 18:25:09 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2010-Jan-01 18:25:09 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-Jan-01 18:25:09 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-Jan-01 18:25:09 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:25:09 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:25:09 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:25:09 LOG2 antvel: Parameters to Doppler: Topocentric 80709 2010 1 0.0 2010-Jan-01 18:25:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:25:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-Jan-01 18:25:09 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-Jan-01 18:25:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:25:09 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:25:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Jan-01 18:25:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:25:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2010-Jan-01 18:25:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:25:09 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-Jan-01 18:25:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2010-Jan-01 18:25:09 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.732889 2010.0048390562019 18.999933 2010-Jan-01 18:25:09 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333327 30.191666666666677 2010-Jan-01 18:25:09 LOG4 log_alfabeam: ALFABEAM 1 1.230186653224391 30.093688827404861 2010-Jan-01 18:25:09 LOG4 log_alfabeam: ALFABEAM 2 1.237537377617800 30.116276390410231 2010-Jan-01 18:25:09 LOG4 log_alfabeam: ALFABEAM 3 1.240723499284088 30.214058985491505 2010-Jan-01 18:25:09 LOG4 log_alfabeam: ALFABEAM 4 1.236468370828841 30.289747188210242 2010-Jan-01 18:25:09 LOG4 log_alfabeam: ALFABEAM 5 1.229073115314052 30.266801976155943 2010-Jan-01 18:25:09 LOG4 log_alfabeam: ALFABEAM 6 1.225977684396481 30.168529708540184 2010-Jan-01 18:25:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32778 2010-Jan-01 18:25:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:25:10 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2010-Jan-01 18:25:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:25:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Jan-01 18:25:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:25:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:25:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:25:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-Jan-01 18:25:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80711.00 2010-Jan-01 18:25:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:25:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:25:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:25:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:25:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:25:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:25:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:25:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:25:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:25:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:25:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:25:21 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2010-Jan-01 18:25:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:25:21 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-Jan-01 18:25:21 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2010-Jan-01 18:25:21 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-Jan-01 18:25:21 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-Jan-01 18:25:21 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:25:21 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:25:21 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:25:21 LOG2 antvel: Parameters to Doppler: Topocentric 80721 2010 1 0.0 2010-Jan-01 18:25:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:25:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-Jan-01 18:25:21 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-Jan-01 18:25:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:25:21 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:25:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Jan-01 18:25:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:25:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2010-Jan-01 18:25:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:25:21 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-Jan-01 18:25:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2010-Jan-01 18:25:21 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.736231 2010.004839436459 18.999933 2010-Jan-01 18:25:21 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333324 30.191666666666670 2010-Jan-01 18:25:21 LOG4 log_alfabeam: ALFABEAM 1 1.230209753934377 30.093564558638437 2010-Jan-01 18:25:21 LOG4 log_alfabeam: ALFABEAM 2 1.237555096810182 30.116443326394325 2010-Jan-01 18:25:21 LOG4 log_alfabeam: ALFABEAM 3 1.240718216813909 30.214351485644297 2010-Jan-01 18:25:21 LOG4 log_alfabeam: ALFABEAM 4 1.236445172710804 30.289871199658197 2010-Jan-01 18:25:21 LOG4 log_alfabeam: ALFABEAM 5 1.229055350682619 30.266632420311350 2010-Jan-01 18:25:21 LOG4 log_alfabeam: ALFABEAM 6 1.225983215970419 30.168237454247279 2010-Jan-01 18:25:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32779 2010-Jan-01 18:25:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:25:22 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2010-Jan-01 18:25:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:25:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Jan-01 18:25:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:25:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:25:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:25:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-Jan-01 18:25:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80723.00 2010-Jan-01 18:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:25:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:25:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:25:33 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2010-Jan-01 18:25:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:25:33 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-Jan-01 18:25:33 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2010-Jan-01 18:25:33 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-Jan-01 18:25:33 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-Jan-01 18:25:33 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:25:33 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:25:33 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:25:33 LOG2 antvel: Parameters to Doppler: Topocentric 80733 2010 1 0.0 2010-Jan-01 18:25:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:25:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-Jan-01 18:25:33 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-Jan-01 18:25:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:25:33 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:25:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Jan-01 18:25:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:25:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2010-Jan-01 18:25:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:25:33 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2010-Jan-01 18:25:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2010-Jan-01 18:25:33 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.739573 2010.004839816716 18.999933 2010-Jan-01 18:25:33 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333331 30.191666666666688 2010-Jan-01 18:25:33 LOG4 log_alfabeam: ALFABEAM 1 1.230232955926924 30.093440822919977 2010-Jan-01 18:25:33 LOG4 log_alfabeam: ALFABEAM 2 1.237572831880070 30.116611487079020 2010-Jan-01 18:25:33 LOG4 log_alfabeam: ALFABEAM 3 1.240712848517245 30.214644688864730 2010-Jan-01 18:25:33 LOG4 log_alfabeam: ALFABEAM 4 1.236421872992971 30.289994671154410 2010-Jan-01 18:25:33 LOG4 log_alfabeam: ALFABEAM 5 1.229037571340912 30.266461628275270 2010-Jan-01 18:25:33 LOG4 log_alfabeam: ALFABEAM 6 1.225988833996699 30.167944515124301 2010-Jan-01 18:25:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32780 2010-Jan-01 18:25:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:25:34 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2010-Jan-01 18:25:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:25:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Jan-01 18:25:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:25:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:25:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:25:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-Jan-01 18:25:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80735.00 2010-Jan-01 18:25:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:25:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:25:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:25:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:25:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:25:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:25:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:25:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:25:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:25:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:25:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:25:45 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2010-Jan-01 18:25:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:25:45 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2010-Jan-01 18:25:45 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2010-Jan-01 18:25:45 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-Jan-01 18:25:45 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-Jan-01 18:25:45 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:25:45 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:25:45 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:25:45 LOG2 antvel: Parameters to Doppler: Topocentric 80745 2010 1 0.0 2010-Jan-01 18:25:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:25:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-Jan-01 18:25:45 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-Jan-01 18:25:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:25:45 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:25:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Jan-01 18:25:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:25:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2010-Jan-01 18:25:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:25:45 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2010-Jan-01 18:25:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2010-Jan-01 18:25:45 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.742916 2010.0048401969732 18.999933 2010-Jan-01 18:25:45 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333326 30.191666666666670 2010-Jan-01 18:25:45 LOG4 log_alfabeam: ALFABEAM 1 1.230256266247642 30.093317593217709 2010-Jan-01 18:25:45 LOG4 log_alfabeam: ALFABEAM 2 1.237590587608780 30.116780928368172 2010-Jan-01 18:25:45 LOG4 log_alfabeam: ALFABEAM 3 1.240707392148545 30.214938678509398 2010-Jan-01 18:25:45 LOG4 log_alfabeam: ALFABEAM 4 1.236398464603904 30.290117629598416 2010-Jan-01 18:25:45 LOG4 log_alfabeam: ALFABEAM 5 1.229019772509196 30.266289543413915 2010-Jan-01 18:25:45 LOG4 log_alfabeam: ALFABEAM 6 1.225994540785366 30.167650808062472 2010-Jan-01 18:25:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32781 2010-Jan-01 18:25:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:25:46 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2010-Jan-01 18:25:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:25:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Jan-01 18:25:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:25:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:25:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:25:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-Jan-01 18:25:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80747.00 2010-Jan-01 18:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:25:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:25:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:25:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:25:57 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2010-Jan-01 18:25:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:25:57 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2010-Jan-01 18:25:57 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2010-Jan-01 18:25:57 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-Jan-01 18:25:57 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-Jan-01 18:25:57 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:25:57 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:25:57 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:25:57 LOG2 antvel: Parameters to Doppler: Topocentric 80757 2010 1 0.0 2010-Jan-01 18:25:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:25:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-Jan-01 18:25:57 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-Jan-01 18:25:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:25:57 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:25:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Jan-01 18:25:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:25:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2010-Jan-01 18:25:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:25:57 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2010-Jan-01 18:25:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2010-Jan-01 18:25:57 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.746258 2010.0048405772302 18.999933 2010-Jan-01 18:25:57 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333328 30.191666666666674 2010-Jan-01 18:25:57 LOG4 log_alfabeam: ALFABEAM 1 1.230279671000078 30.093194953071411 2010-Jan-01 18:25:57 LOG4 log_alfabeam: ALFABEAM 2 1.237608352833766 30.116951553876383 2010-Jan-01 18:25:57 LOG4 log_alfabeam: ALFABEAM 3 1.240701850372298 30.215233273887840 2010-Jan-01 18:25:57 LOG4 log_alfabeam: ALFABEAM 4 1.236374961502410 30.290239991562956 2010-Jan-01 18:25:57 LOG4 log_alfabeam: ALFABEAM 5 1.229001965390174 30.266116263759457 2010-Jan-01 18:25:57 LOG4 log_alfabeam: ALFABEAM 6 1.226000333511481 30.167356513743588 2010-Jan-01 18:25:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32782 2010-Jan-01 18:25:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:25:58 LOG5 begin_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2010-Jan-01 18:25:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:25:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Jan-01 18:25:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:25:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:25:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:25:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-Jan-01 18:25:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80759.00 2010-Jan-01 18:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:26:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:26:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:26:09 LOG5 end_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2010-Jan-01 18:26:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:26:09 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2010-Jan-01 18:26:09 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2010-Jan-01 18:26:09 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-Jan-01 18:26:09 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Jan-01 18:26:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-01 18:26:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-01 18:26:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-01 18:26:09 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2010-Jan-01 18:26:09 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-01 18:26:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-01 18:26:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-01 18:26:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-01 18:26:09 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2010-Jan-01 18:26:09 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Jan-01 18:26:09 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2010-Jan-01 18:26:09 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-Jan-01 18:26:09 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-Jan-01 18:26:09 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:26:09 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:26:09 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:26:09 LOG2 antvel: Parameters to Doppler: Topocentric 80769 2010 1 0.0 2010-Jan-01 18:26:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:26:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-Jan-01 18:26:09 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-Jan-01 18:26:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:26:09 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:26:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Jan-01 18:26:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:26:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2010-Jan-01 18:26:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:26:09 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-Jan-01 18:26:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2010-Jan-01 18:26:09 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.749601 2010.0048409574872 18.999933 2010-Jan-01 18:26:09 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333325 30.191666666666670 2010-Jan-01 18:26:09 LOG4 log_alfabeam: ALFABEAM 1 1.230303184231563 30.093072838971850 2010-Jan-01 18:26:09 LOG4 log_alfabeam: ALFABEAM 2 1.237626137638831 30.117123470649091 2010-Jan-01 18:26:09 LOG4 log_alfabeam: ALFABEAM 3 1.240696219272724 30.215528646372874 2010-Jan-01 18:26:09 LOG4 log_alfabeam: ALFABEAM 4 1.236351349586022 30.290361820341317 2010-Jan-01 18:26:09 LOG4 log_alfabeam: ALFABEAM 5 1.228984139889383 30.265941680745499 2010-Jan-01 18:26:09 LOG4 log_alfabeam: ALFABEAM 6 1.226006216230066 30.167061461135006 2010-Jan-01 18:26:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32783 2010-Jan-01 18:26:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:26:10 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2010-Jan-01 18:26:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:26:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Jan-01 18:26:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:26:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:26:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:26:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-Jan-01 18:26:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80771.00 2010-Jan-01 18:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:26:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:26:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:26:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:26:21 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2010-Jan-01 18:26:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:26:21 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-Jan-01 18:26:21 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2010-Jan-01 18:26:21 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-Jan-01 18:26:21 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-Jan-01 18:26:21 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:26:21 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:26:21 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:26:21 LOG2 antvel: Parameters to Doppler: Topocentric 80781 2010 1 0.0 2010-Jan-01 18:26:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:26:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-Jan-01 18:26:21 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-Jan-01 18:26:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:26:21 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:26:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Jan-01 18:26:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:26:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2010-Jan-01 18:26:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:26:21 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-Jan-01 18:26:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2010-Jan-01 18:26:21 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.752943 2010.0048413377442 18.999933 2010-Jan-01 18:26:21 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333327 30.191666666666670 2010-Jan-01 18:26:21 LOG4 log_alfabeam: ALFABEAM 1 1.230326791907291 30.092951333919451 2010-Jan-01 18:26:21 LOG4 log_alfabeam: ALFABEAM 2 1.237643930828873 30.117296580715049 2010-Jan-01 18:26:21 LOG4 log_alfabeam: ALFABEAM 3 1.240690501620460 30.215824614211336 2010-Jan-01 18:26:21 LOG4 log_alfabeam: ALFABEAM 4 1.236327642952392 30.290483033054628 2010-Jan-01 18:26:21 LOG4 log_alfabeam: ALFABEAM 5 1.228966307240658 30.265765894008393 2010-Jan-01 18:26:21 LOG4 log_alfabeam: ALFABEAM 6 1.226012186008788 30.166765831958152 2010-Jan-01 18:26:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32784 2010-Jan-01 18:26:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:26:22 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2010-Jan-01 18:26:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:26:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Jan-01 18:26:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:26:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:26:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:26:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-Jan-01 18:26:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80783.00 2010-Jan-01 18:26:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:26:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:26:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:26:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:26:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:26:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:26:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:26:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:26:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:26:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:26:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:26:33 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2010-Jan-01 18:26:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:26:33 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-Jan-01 18:26:33 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2010-Jan-01 18:26:33 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-Jan-01 18:26:33 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-Jan-01 18:26:33 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:26:33 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:26:33 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:26:33 LOG2 antvel: Parameters to Doppler: Topocentric 80793 2010 1 0.0 2010-Jan-01 18:26:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:26:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-Jan-01 18:26:33 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-Jan-01 18:26:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:26:33 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:26:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Jan-01 18:26:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:26:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2010-Jan-01 18:26:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:26:33 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-Jan-01 18:26:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2010-Jan-01 18:26:33 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.756286 2010.0048417180012 18.999933 2010-Jan-01 18:26:33 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333325 30.191666666666677 2010-Jan-01 18:26:33 LOG4 log_alfabeam: ALFABEAM 1 1.230350508178829 30.092830375210820 2010-Jan-01 18:26:33 LOG4 log_alfabeam: ALFABEAM 2 1.237661742489285 30.117470992498376 2010-Jan-01 18:26:33 LOG4 log_alfabeam: ALFABEAM 3 1.240684693396392 30.216121349360190 2010-Jan-01 18:26:33 LOG4 log_alfabeam: ALFABEAM 4 1.236303827394699 30.290603692182366 2010-Jan-01 18:26:33 LOG4 log_alfabeam: ALFABEAM 5 1.228948457349480 30.265588793594386 2010-Jan-01 18:26:33 LOG4 log_alfabeam: ALFABEAM 6 1.226018247006333 30.166469454617935 2010-Jan-01 18:26:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32785 2010-Jan-01 18:26:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:26:34 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2010-Jan-01 18:26:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:26:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Jan-01 18:26:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:26:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:26:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:26:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-Jan-01 18:26:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80795.00 2010-Jan-01 18:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:26:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:26:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:26:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:26:45 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2010-Jan-01 18:26:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:26:45 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-Jan-01 18:26:45 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2010-Jan-01 18:26:45 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-Jan-01 18:26:45 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-Jan-01 18:26:45 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:26:45 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:26:45 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:26:45 LOG2 antvel: Parameters to Doppler: Topocentric 80805 2010 1 0.0 2010-Jan-01 18:26:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:26:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-Jan-01 18:26:45 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-Jan-01 18:26:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:26:45 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:26:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Jan-01 18:26:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:26:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2010-Jan-01 18:26:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:26:45 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-Jan-01 18:26:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2010-Jan-01 18:26:45 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.759628 2010.0048420982585 18.999933 2010-Jan-01 18:26:45 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333329 30.191666666666670 2010-Jan-01 18:26:45 LOG4 log_alfabeam: ALFABEAM 1 1.230374318872389 30.092710045279969 2010-Jan-01 18:26:45 LOG4 log_alfabeam: ALFABEAM 2 1.237679561393689 30.117646606423705 2010-Jan-01 18:26:45 LOG4 log_alfabeam: ALFABEAM 3 1.240678797479245 30.216418669012231 2010-Jan-01 18:26:45 LOG4 log_alfabeam: ALFABEAM 4 1.236279917150084 30.290723715421198 2010-Jan-01 18:26:45 LOG4 log_alfabeam: ALFABEAM 5 1.228930601479506 30.265410480762160 2010-Jan-01 18:26:45 LOG4 log_alfabeam: ALFABEAM 6 1.226024396181109 30.166172511866240 2010-Jan-01 18:26:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32786 2010-Jan-01 18:26:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:26:46 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2010-Jan-01 18:26:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:26:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Jan-01 18:26:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:26:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:26:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:26:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-Jan-01 18:26:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80807.00 2010-Jan-01 18:26:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:26:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:26:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:26:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:26:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:26:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:26:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:26:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:26:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:26:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:26:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:26:57 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2010-Jan-01 18:26:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:26:57 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-Jan-01 18:26:57 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2010-Jan-01 18:26:57 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-Jan-01 18:26:57 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-Jan-01 18:26:57 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:26:57 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:26:57 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:26:57 LOG2 antvel: Parameters to Doppler: Topocentric 80817 2010 1 0.0 2010-Jan-01 18:26:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:26:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-Jan-01 18:26:57 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-Jan-01 18:26:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:26:57 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:26:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Jan-01 18:26:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:26:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2010-Jan-01 18:26:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:26:57 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2010-Jan-01 18:26:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2010-Jan-01 18:26:57 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.762971 2010.0048424785155 18.999933 2010-Jan-01 18:26:57 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333327 30.191666666666674 2010-Jan-01 18:26:57 LOG4 log_alfabeam: ALFABEAM 1 1.230398238243295 30.092590282249990 2010-Jan-01 18:26:57 LOG4 log_alfabeam: ALFABEAM 2 1.237697397627638 30.117823532298825 2010-Jan-01 18:26:57 LOG4 log_alfabeam: ALFABEAM 3 1.240672809745574 30.216716745692796 2010-Jan-01 18:26:57 LOG4 log_alfabeam: ALFABEAM 4 1.236255897907787 30.290843164416298 2010-Jan-01 18:26:57 LOG4 log_alfabeam: ALFABEAM 5 1.228912729537599 30.265230844166069 2010-Jan-01 18:26:57 LOG4 log_alfabeam: ALFABEAM 6 1.226030637796343 30.165874831561506 2010-Jan-01 18:26:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32787 2010-Jan-01 18:26:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:26:58 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2010-Jan-01 18:26:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:26:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Jan-01 18:26:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:26:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:26:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:26:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-Jan-01 18:26:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80819.00 2010-Jan-01 18:27:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:27:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:27:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:27:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:27:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:27:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:27:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:27:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:27:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:27:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:27:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:27:09 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2010-Jan-01 18:27:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:27:09 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2010-Jan-01 18:27:09 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2010-Jan-01 18:27:09 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-Jan-01 18:27:09 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-Jan-01 18:27:09 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:27:09 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:27:09 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:27:09 LOG2 antvel: Parameters to Doppler: Topocentric 80829 2010 1 0.0 2010-Jan-01 18:27:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:27:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-Jan-01 18:27:09 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-Jan-01 18:27:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:27:09 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:27:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Jan-01 18:27:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:27:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2010-Jan-01 18:27:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:27:09 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2010-Jan-01 18:27:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2010-Jan-01 18:27:09 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.766313 2010.0048428587725 18.999933 2010-Jan-01 18:27:09 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333326 30.191666666666670 2010-Jan-01 18:27:09 LOG4 log_alfabeam: ALFABEAM 1 1.230422251978277 30.092471167960866 2010-Jan-01 18:27:09 LOG4 log_alfabeam: ALFABEAM 2 1.237715239934841 30.118001668926091 2010-Jan-01 18:27:09 LOG4 log_alfabeam: ALFABEAM 3 1.240666733184143 30.217015395549844 2010-Jan-01 18:27:09 LOG4 log_alfabeam: ALFABEAM 4 1.236231784045029 30.290961957467587 2010-Jan-01 18:27:09 LOG4 log_alfabeam: ALFABEAM 5 1.228894852815897 30.265049986705140 2010-Jan-01 18:27:09 LOG4 log_alfabeam: ALFABEAM 6 1.226036968699321 30.165576597476182 2010-Jan-01 18:27:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32788 2010-Jan-01 18:27:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:27:10 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2010-Jan-01 18:27:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:27:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Jan-01 18:27:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:27:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:27:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:27:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-Jan-01 18:27:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80831.00 2010-Jan-01 18:27:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:27:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:27:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:27:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:27:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:27:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:27:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:27:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:27:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:27:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:27:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:27:21 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2010-Jan-01 18:27:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:27:21 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2010-Jan-01 18:27:21 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2010-Jan-01 18:27:21 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-Jan-01 18:27:21 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-Jan-01 18:27:21 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:27:21 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:27:21 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:27:21 LOG2 antvel: Parameters to Doppler: Topocentric 80841 2010 1 0.0 2010-Jan-01 18:27:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:27:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-Jan-01 18:27:21 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-Jan-01 18:27:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:27:21 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:27:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Jan-01 18:27:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:27:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2010-Jan-01 18:27:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:27:21 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2010-Jan-01 18:27:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2010-Jan-01 18:27:21 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.769656 2010.0048432390295 18.999933 2010-Jan-01 18:27:21 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333332 30.191666666666674 2010-Jan-01 18:27:21 LOG4 log_alfabeam: ALFABEAM 1 1.230446374435844 30.092352641382835 2010-Jan-01 18:27:21 LOG4 log_alfabeam: ALFABEAM 2 1.237733098399569 30.118181127501508 2010-Jan-01 18:27:21 LOG4 log_alfabeam: ALFABEAM 3 1.240660563566232 30.217314791661060 2010-Jan-01 18:27:21 LOG4 log_alfabeam: ALFABEAM 4 1.236207561147640 30.291080155365222 2010-Jan-01 18:27:21 LOG4 log_alfabeam: ALFABEAM 5 1.228876961224039 30.264867795637532 2010-Jan-01 18:27:21 LOG4 log_alfabeam: ALFABEAM 6 1.226043393258679 30.165277636938637 2010-Jan-01 18:27:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32789 2010-Jan-01 18:27:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:27:22 LOG5 begin_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2010-Jan-01 18:27:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:27:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Jan-01 18:27:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:27:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:27:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:27:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-Jan-01 18:27:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80843.00 2010-Jan-01 18:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:27:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:27:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:27:33 LOG5 end_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2010-Jan-01 18:27:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:27:33 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2010-Jan-01 18:27:33 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-Jan-01 18:27:33 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-01 18:27:33 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-01 18:27:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-01 18:27:33 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2010-Jan-01 18:27:33 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-01 18:27:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-01 18:27:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-01 18:27:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-01 18:27:33 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2010-Jan-01 18:27:33 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2010-Jan-01 18:27:33 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-Jan-01 18:27:33 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-Jan-01 18:27:33 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:27:33 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:27:33 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:27:33 LOG2 antvel: Parameters to Doppler: Topocentric 80853 2010 1 0.0 2010-Jan-01 18:27:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:27:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-Jan-01 18:27:33 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-Jan-01 18:27:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:27:33 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:27:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Jan-01 18:27:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:27:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2010-Jan-01 18:27:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:27:33 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-Jan-01 18:27:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2010-Jan-01 18:27:33 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.772998 2010.0048436192865 18.999933 2010-Jan-01 18:27:33 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333332 30.191666666666670 2010-Jan-01 18:27:33 LOG4 log_alfabeam: ALFABEAM 1 1.230470591162708 30.092234783733737 2010-Jan-01 18:27:33 LOG4 log_alfabeam: ALFABEAM 2 1.237750961736988 30.118361805187245 2010-Jan-01 18:27:33 LOG4 log_alfabeam: ALFABEAM 3 1.240654303992568 30.217614749139699 2010-Jan-01 18:27:33 LOG4 log_alfabeam: ALFABEAM 4 1.236183243733407 30.291197677040749 2010-Jan-01 18:27:33 LOG4 log_alfabeam: ALFABEAM 5 1.228859066081242 30.264684375520531 2010-Jan-01 18:27:33 LOG4 log_alfabeam: ALFABEAM 6 1.226049908208703 30.164978134731282 2010-Jan-01 18:27:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32790 2010-Jan-01 18:27:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:27:34 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2010-Jan-01 18:27:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:27:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Jan-01 18:27:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:27:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:27:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:27:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-Jan-01 18:27:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80855.00 2010-Jan-01 18:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:27:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:27:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:27:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:27:45 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2010-Jan-01 18:27:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:27:45 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-Jan-01 18:27:45 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2010-Jan-01 18:27:45 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-Jan-01 18:27:45 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-Jan-01 18:27:45 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:27:45 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:27:45 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:27:45 LOG2 antvel: Parameters to Doppler: Topocentric 80865 2010 1 0.0 2010-Jan-01 18:27:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:27:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-Jan-01 18:27:45 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-Jan-01 18:27:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:27:45 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:27:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Jan-01 18:27:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:27:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2010-Jan-01 18:27:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:27:45 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-Jan-01 18:27:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2010-Jan-01 18:27:45 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.776341 2010.0048439995437 18.999933 2010-Jan-01 18:27:45 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333336 30.191666666666645 2010-Jan-01 18:27:45 LOG4 log_alfabeam: ALFABEAM 1 1.230494916620073 30.092117534851450 2010-Jan-01 18:27:45 LOG4 log_alfabeam: ALFABEAM 2 1.237768840028667 30.118543814571488 2010-Jan-01 18:27:45 LOG4 log_alfabeam: ALFABEAM 3 1.240647950128289 30.217915441598940 2010-Jan-01 18:27:45 LOG4 log_alfabeam: ALFABEAM 4 1.236158817285348 30.291314582408539 2010-Jan-01 18:27:45 LOG4 log_alfabeam: ALFABEAM 5 1.228841157301418 30.264499612212166 2010-Jan-01 18:27:45 LOG4 log_alfabeam: ALFABEAM 6 1.226056518024317 30.164677917669124 2010-Jan-01 18:27:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32791 2010-Jan-01 18:27:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:27:46 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-Jan-01 18:27:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:27:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Jan-01 18:27:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:27:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:27:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:27:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-Jan-01 18:27:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80867.00 2010-Jan-01 18:27:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:27:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:27:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:27:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:27:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:27:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:27:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:27:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:27:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:27:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:27:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:27:57 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-Jan-01 18:27:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:27:57 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-Jan-01 18:27:57 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2010-Jan-01 18:27:57 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-Jan-01 18:27:57 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-Jan-01 18:27:57 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:27:57 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:27:57 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:27:57 LOG2 antvel: Parameters to Doppler: Topocentric 80877 2010 1 0.0 2010-Jan-01 18:27:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:27:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-Jan-01 18:27:57 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-Jan-01 18:27:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:27:57 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:27:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Jan-01 18:27:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:27:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2010-Jan-01 18:27:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:27:57 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-Jan-01 18:27:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2010-Jan-01 18:27:57 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.779683 2010.0048443798007 18.999933 2010-Jan-01 18:27:57 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333327 30.191666666666688 2010-Jan-01 18:27:57 LOG4 log_alfabeam: ALFABEAM 1 1.230519336214122 30.092000975303144 2010-Jan-01 18:27:57 LOG4 log_alfabeam: ALFABEAM 2 1.237786721962620 30.118727051158608 2010-Jan-01 18:27:57 LOG4 log_alfabeam: ALFABEAM 3 1.240641505187938 30.218216683128343 2010-Jan-01 18:27:57 LOG4 log_alfabeam: ALFABEAM 4 1.236134296462255 30.291430791060790 2010-Jan-01 18:27:57 LOG4 log_alfabeam: ALFABEAM 5 1.228823246229323 30.264313611945763 2010-Jan-01 18:27:57 LOG4 log_alfabeam: ALFABEAM 6 1.226063219324869 30.164377171533246 2010-Jan-01 18:27:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32792 2010-Jan-01 18:27:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:27:58 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-Jan-01 18:27:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:27:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Jan-01 18:27:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:27:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:27:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:27:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-Jan-01 18:27:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80879.00 2010-Jan-01 18:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:28:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:28:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:28:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:28:09 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-Jan-01 18:28:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:28:09 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-Jan-01 18:28:09 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2010-Jan-01 18:28:09 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-Jan-01 18:28:09 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-Jan-01 18:28:09 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:28:09 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00484 J 2010-Jan-01 18:28:09 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:28:09 LOG2 antvel: Parameters to Doppler: Topocentric 80889 2010 1 0.0 2010-Jan-01 18:28:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:28:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-Jan-01 18:28:09 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-Jan-01 18:28:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:28:09 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:28:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Jan-01 18:28:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:28:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2010-Jan-01 18:28:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:28:09 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-Jan-01 18:28:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2010-Jan-01 18:28:09 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.783025 2010.0048447600577 18.999933 2010-Jan-01 18:28:09 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333325 30.191666666666674 2010-Jan-01 18:28:09 LOG4 log_alfabeam: ALFABEAM 1 1.230543857155765 30.091885080392721 2010-Jan-01 18:28:09 LOG4 log_alfabeam: ALFABEAM 2 1.237804612261916 30.118911573526656 2010-Jan-01 18:28:09 LOG4 log_alfabeam: ALFABEAM 3 1.240634966700179 30.218518557438056 2010-Jan-01 18:28:09 LOG4 log_alfabeam: ALFABEAM 4 1.236109674027723 30.291546327545902 2010-Jan-01 18:28:09 LOG4 log_alfabeam: ALFABEAM 5 1.228805328147126 30.264126315413435 2010-Jan-01 18:28:09 LOG4 log_alfabeam: ALFABEAM 6 1.226070014645024 30.164075812906624 2010-Jan-01 18:28:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32793 2010-Jan-01 18:28:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:28:10 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2010-Jan-01 18:28:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:28:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Jan-01 18:28:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:28:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:28:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:28:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-Jan-01 18:28:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80891.00 2010-Jan-01 18:28:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:28:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:28:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:28:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:28:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:28:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:28:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:28:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:28:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:28:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:28:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:28:21 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2010-Jan-01 18:28:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:28:21 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-Jan-01 18:28:21 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2010-Jan-01 18:28:21 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-Jan-01 18:28:21 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-Jan-01 18:28:21 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:28:21 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00485 J 2010-Jan-01 18:28:21 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:28:21 LOG2 antvel: Parameters to Doppler: Topocentric 80901 2010 1 0.0 2010-Jan-01 18:28:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:28:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-Jan-01 18:28:21 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-Jan-01 18:28:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:28:21 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:28:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Jan-01 18:28:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:28:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2010-Jan-01 18:28:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:28:21 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2010-Jan-01 18:28:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2010-Jan-01 18:28:21 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.786368 2010.0048451403147 18.999933 2010-Jan-01 18:28:21 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333326 30.191666666666670 2010-Jan-01 18:28:21 LOG4 log_alfabeam: ALFABEAM 1 1.230568486767367 30.091769826273932 2010-Jan-01 18:28:21 LOG4 log_alfabeam: ALFABEAM 2 1.237822515651990 30.119097441722548 2010-Jan-01 18:28:21 LOG4 log_alfabeam: ALFABEAM 3 1.240628332083802 30.218821148869882 2010-Jan-01 18:28:21 LOG4 log_alfabeam: ALFABEAM 4 1.236084942633674 30.291661215554242 2010-Jan-01 18:28:21 LOG4 log_alfabeam: ALFABEAM 5 1.228787398336208 30.263937661828866 2010-Jan-01 18:28:21 LOG4 log_alfabeam: ALFABEAM 6 1.226076906629560 30.163773757764339 2010-Jan-01 18:28:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32794 2010-Jan-01 18:28:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:28:22 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2010-Jan-01 18:28:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:28:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Jan-01 18:28:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:28:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:28:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:28:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-Jan-01 18:28:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80903.00 2010-Jan-01 18:28:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:28:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:28:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:28:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:28:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:28:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:28:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:28:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:28:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:28:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:28:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:28:33 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2010-Jan-01 18:28:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:28:33 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2010-Jan-01 18:28:33 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2010-Jan-01 18:28:33 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-Jan-01 18:28:33 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-Jan-01 18:28:33 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:28:33 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00485 J 2010-Jan-01 18:28:33 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:28:33 LOG2 antvel: Parameters to Doppler: Topocentric 80913 2010 1 0.0 2010-Jan-01 18:28:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:28:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-Jan-01 18:28:33 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-Jan-01 18:28:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:28:33 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:28:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Jan-01 18:28:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:28:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2010-Jan-01 18:28:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:28:33 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2010-Jan-01 18:28:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2010-Jan-01 18:28:33 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.789710 2010.0048455205717 18.999933 2010-Jan-01 18:28:33 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333327 30.191666666666674 2010-Jan-01 18:28:33 LOG4 log_alfabeam: ALFABEAM 1 1.230593210243593 30.091655292482702 2010-Jan-01 18:28:33 LOG4 log_alfabeam: ALFABEAM 2 1.237840420782958 30.119284548730949 2010-Jan-01 18:28:33 LOG4 log_alfabeam: ALFABEAM 3 1.240621604727830 30.219124269999423 2010-Jan-01 18:28:33 LOG4 log_alfabeam: ALFABEAM 4 1.236060117151192 30.291775375723990 2010-Jan-01 18:28:33 LOG4 log_alfabeam: ALFABEAM 5 1.228769468176825 30.263747759971540 2010-Jan-01 18:28:33 LOG4 log_alfabeam: ALFABEAM 6 1.226083891721887 30.163471193362277 2010-Jan-01 18:28:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32795 2010-Jan-01 18:28:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:28:34 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2010-Jan-01 18:28:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:28:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Jan-01 18:28:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:28:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:28:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:28:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-Jan-01 18:28:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80915.00 2010-Jan-01 18:28:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:28:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:28:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:28:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:28:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:28:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:28:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:28:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:28:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:28:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:28:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:28:45 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2010-Jan-01 18:28:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:28:45 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2010-Jan-01 18:28:45 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2010-Jan-01 18:28:45 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-Jan-01 18:28:45 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-Jan-01 18:28:45 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:28:45 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00485 J 2010-Jan-01 18:28:45 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:28:45 LOG2 antvel: Parameters to Doppler: Topocentric 80925 2010 1 0.0 2010-Jan-01 18:28:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:28:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-Jan-01 18:28:45 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-Jan-01 18:28:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:28:45 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:28:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Jan-01 18:28:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:28:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2010-Jan-01 18:28:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:28:45 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2010-Jan-01 18:28:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2010-Jan-01 18:28:45 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.793053 2010.004845900829 18.999933 2010-Jan-01 18:28:45 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333326 30.191666666666677 2010-Jan-01 18:28:45 LOG4 log_alfabeam: ALFABEAM 1 1.230618042299583 30.091541421116428 2010-Jan-01 18:28:45 LOG4 log_alfabeam: ALFABEAM 2 1.237858337723210 30.119473010635883 2010-Jan-01 18:28:45 LOG4 log_alfabeam: ALFABEAM 3 1.240614780028222 30.219428095703520 2010-Jan-01 18:28:45 LOG4 log_alfabeam: ALFABEAM 4 1.236035182809040 30.291888865689732 2010-Jan-01 18:28:45 LOG4 log_alfabeam: ALFABEAM 5 1.228751527600110 30.263556492185526 2010-Jan-01 18:28:45 LOG4 log_alfabeam: ALFABEAM 6 1.226090974666318 30.163167945308370 2010-Jan-01 18:28:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32796 2010-Jan-01 18:28:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:28:46 LOG5 begin_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2010-Jan-01 18:28:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:28:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Jan-01 18:28:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:28:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:28:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:28:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-Jan-01 18:28:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80927.00 2010-Jan-01 18:28:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:28:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:28:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:28:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:28:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:28:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:28:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:28:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:28:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:28:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:28:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:28:57 LOG5 end_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2010-Jan-01 18:28:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:28:57 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2010-Jan-01 18:28:57 INFO2 smartfreq: Switching off CAL 2010-Jan-01 18:28:57 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-01 18:28:57 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-01 18:28:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-01 18:28:57 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2010-Jan-01 18:28:57 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-01 18:28:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-01 18:28:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-01 18:28:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-01 18:28:57 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2010-Jan-01 18:28:57 INFO3 restore_frequencies: Restoring original frequencies 2010-Jan-01 18:28:57 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:28:57 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00485 J 2010-Jan-01 18:28:57 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:28:57 LOG2 antvel: Parameters to Doppler: Topocentric 80937 2010 1 0.0 2010-Jan-01 18:28:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:28:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2010-Jan-01 18:28:57 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2010-Jan-01 18:28:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:28:57 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:28:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Jan-01 18:28:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:28:57 STOP finish_task: Finishing task 'smart frequency switching' 2010-Jan-01 18:28:57 LOG5 finish_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2010-Jan-01 18:28:57 DONE finish_task: DONE finished pattern: smart frequency switching 2010-Jan-01 18:28:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-01 18:28:57 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2010-Jan-01 18:28:57 LOG5 end_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2010-Jan-01 18:28:57 NOTE run_command_file: DONE with command file processing 2010-Jan-01 18:28:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Jan-01 18:28:57 STOP finish_task: Finishing task 'running command file 'command_galfasrc_cima31.cmd'' 2010-Jan-01 18:28:57 LOG5 finish_task: Level: (1) ID = <10004> Status = 0 0 0 0 ok 2010-Jan-01 18:28:57 DONE finish_task: DONE finished running: command file 'command_galfasrc_cima31.cmd' 2010-Jan-01 18:28:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-01 18:28:58 END end_task: Finishing task 'running command file 'command_galfasrc_cima31.cmd'' with status 'OK' 2010-Jan-01 18:28:58 LOG5 end_task: Level: (1) ID = <10004> Status = 0 0 0 0 ok 2010-Jan-01 18:28:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Jan-01 18:28:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:28:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:28:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:29:24 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima31.cmd' (at lines 1 - 24) 2010-Jan-01 18:29:24 INFO4 CIMA-load_command_file: Loaded command file '100101.cmd' 2010-Jan-01 18:29:28 INFO1 CIMA-run_command_file: Transferring command file '100101.cmd' to executive ... 2010-Jan-01 18:29:28 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima31.conf} 2010-Jan-01 18:29:28 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2010-Jan-01 18:29:28 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2010-Jan-01 18:29:28 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2010-Jan-01 18:29:28 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2010-Jan-01 18:29:28 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2010-Jan-01 18:29:28 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2010-Jan-01 18:29:28 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2010-Jan-01 18:29:28 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2010-Jan-01 18:29:28 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 27 {LOAD ages_mock.conf} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 28 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 29 {CATALOG AGESFull.cat} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 32 {IF LSTSLEW(AGES33PP_p2_110) < 004834 THEN} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 33 {FIXEDDRIFT az=213.44 alfaangle=-13.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p2_110 ra=12400.00 dec=295630.00} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 36 {ENDIF} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 39 {IF LSTSLEW(AGES33PP_p2_112) < 011134 THEN} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 40 {FIXEDDRIFT az=193.71 alfaangle=6.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p2_112 ra=12400.00 dec=295330.00} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 43 {ENDIF} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 46 {IF LSTSLEW(AGES2082_p3_063) < 014235 THEN} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 47 {FIXEDDRIFT az=236.42 alfaangle=-37.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_063 ra=23100.00 dec=251500.00} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 50 {ENDIF} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 53 {IF LSTSLEW(AGES2082_p3_065) < 015435 THEN} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 54 {FIXEDDRIFT az=229.60 alfaangle=-29.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_065 ra=23100.00 dec=251200.00} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 57 {ENDIF} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 29 60 {IF LSTSLEW(AGES2082_p3_067) < 020635 THEN} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 30 61 {FIXEDDRIFT az=219.18 alfaangle=-18.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_067 ra=23100.00 dec=250900.00} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 31 64 {ENDIF} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 32 67 {IF LSTSLEW(AGES2082_p3_069) < 021835 THEN} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 33 68 {FIXEDDRIFT az=203.37 alfaangle=-2.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_069 ra=23100.00 dec=250600.00} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 34 71 {ENDIF} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 35 74 {IF LSTSLEW(AGES2082_p3_071) < 023135 THEN} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 36 75 {FIXEDDRIFT az=180.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_071 ra=23100.00 dec=250300.00} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 37 78 {ENDIF} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 38 81 {IF LSTSLEW(AGES2082_p3_073) < 024435 THEN} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 39 82 {FIXEDDRIFT az=156.30 alfaangle=40.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_073 ra=23100.00 dec=250000.00} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 40 85 {ENDIF} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 41 88 {IF LSTSLEW(AGES2082_p3_075) < 025635 THEN} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 42 89 {FIXEDDRIFT az=139.95 alfaangle=57.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_075 ra=23100.00 dec=245700.00} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 43 92 {ENDIF} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 44 95 {IF LSTSLEW(AGES2082_p3_077) < 030835 THEN} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 45 96 {FIXEDDRIFT az=129.12 alfaangle=69.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_077 ra=23100.00 dec=245400.00} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 46 99 {ENDIF} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 47 102 {IF LSTSLEW(AGES2082_p3_079) < 032035 THEN} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 48 103 {FIXEDDRIFT az=122.04 alfaangle=77.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=AGES2082_p3_079 ra=23100.00 dec=245100.00} 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: store_command_file_line 49 106 {ENDIF} 2010-Jan-01 18:29:29 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Jan-01 18:29:29 LOG4 exec_msg: From OBSERVER: run_command_file 100101.cmd 1 1 49 2010-Jan-01 18:29:29 LOG4 run_command_file: Calling 'run_command_file 100101.cmd 1 1 49' 2010-Jan-01 18:29:29 BEGIN begin_task: Starting task 'running command file '100101.cmd'' 2010-Jan-01 18:29:29 LOG5 begin_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2010-Jan-01 18:29:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '100101.cmd' ...} 2010-Jan-01 18:29:29 NOTE run_command_file: Starting execution of command file '100101.cmd' from line 1 2010-Jan-01 18:29:29 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima31.conf' 2010-Jan-01 18:29:29 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Jan-01 18:29:30 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-01 18:29:30 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Jan-01 18:29:30 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2010-Jan-01 18:29:30 LOG2 CIMA-antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00485 J 2010-Jan-01 18:29:30 LOG2 CIMA-antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:29:30 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 80969 2010 1 0.0 2010-Jan-01 18:29:30 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:29:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Jan-01 18:29:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Jan-01 18:29:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Jan-01 18:29:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Jan-01 18:29:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Jan-01 18:29:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-Jan-01 18:29:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Jan-01 18:29:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2010-Jan-01 18:29:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2010-Jan-01 18:29:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2010-Jan-01 18:29:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2010-Jan-01 18:29:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2010-Jan-01 18:29:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2010-Jan-01 18:29:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2010-Jan-01 18:29:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2010-Jan-01 18:29:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2010-Jan-01 18:29:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Jan-01 18:29:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Jan-01 18:29:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Jan-01 18:29:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Jan-01 18:29:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Jan-01 18:29:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Jan-01 18:29:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Jan-01 18:29:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Jan-01 18:29:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Jan-01 18:29:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Jan-01 18:29:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Jan-01 18:29:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Jan-01 18:29:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Jan-01 18:29:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Jan-01 18:29:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Jan-01 18:29:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Jan-01 18:29:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Jan-01 18:29:32 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-01 18:29:32 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Jan-01 18:29:32 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2010-Jan-01 18:29:32 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Jan-01 18:29:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Jan-01 18:29:32 LOG1 config_iflo: Receiver ALFA already selected 2010-Jan-01 18:29:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-01 18:29:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-01 18:29:32 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-01 18:29:32 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-Jan-01 18:29:32 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-01 18:29:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-01 18:29:32 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-Jan-01 18:29:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-01 18:29:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-01 18:29:32 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-Jan-01 18:29:32 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-Jan-01 18:29:32 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Jan-01 18:29:32 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Jan-01 18:29:32 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-Jan-01 18:29:32 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-Jan-01 18:29:32 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-Jan-01 18:29:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Jan-01 18:29:32 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-Jan-01 18:29:32 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-Jan-01 18:29:32 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Jan-01 18:29:32 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Jan-01 18:29:32 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Jan-01 18:29:32 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Jan-01 18:29:32 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Jan-01 18:29:32 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-Jan-01 18:29:32 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-Jan-01 18:29:32 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-Jan-01 18:29:32 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-Jan-01 18:29:32 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Jan-01 18:29:32 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-Jan-01 18:29:32 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-Jan-01 18:29:32 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Jan-01 18:29:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:29:32 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-Jan-01 18:29:32 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-Jan-01 18:29:32 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Jan-01 18:29:32 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-Jan-01 18:29:32 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-Jan-01 18:29:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Jan-01 18:29:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:29:32 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Jan-01 18:29:32 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2010-Jan-01 18:29:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Jan-01 18:29:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Jan-01 18:29:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:29:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:29:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:29:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:29:32 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-Jan-01 18:29:32 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Jan-01 18:29:32 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2010-Jan-01 18:29:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Jan-01 18:29:32 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Jan-01 18:29:32 LOG5 finish_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2010-Jan-01 18:29:32 DONE finish_task: DONE finished configuration: IF/LO path 2010-Jan-01 18:29:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-01 18:29:33 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Jan-01 18:29:33 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2010-Jan-01 18:29:33 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Jan-01 18:29:33 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2010-Jan-01 18:29:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Jan-01 18:29:33 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Jan-01 18:29:33 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Jan-01 18:29:33 START begin_task: Starting task 'selecting calibration port' 2010-Jan-01 18:29:33 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2010-Jan-01 18:29:33 LOG3 vw_send: To DATATAKING: calport 3 2010-Jan-01 18:29:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Jan-01 18:29:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:29:33 START begin_task: Starting task 'waiting on calport' 2010-Jan-01 18:29:33 LOG5 begin_task: Level: (4) ID = <10098> Status = 0 0 0 0 ok 2010-Jan-01 18:29:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:29:33 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Jan-01 18:29:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:29:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:29:33 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-01 18:29:33 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Jan-01 18:29:33 LOG5 end_task: Level: (4) ID = <10098> Status = 0 0 0 0 ok 2010-Jan-01 18:29:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Jan-01 18:29:33 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Jan-01 18:29:33 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2010-Jan-01 18:29:33 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-01 18:29:33 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-01 18:29:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-01 18:29:33 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2010-Jan-01 18:29:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:29:33 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-01 18:29:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-01 18:29:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-01 18:29:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-01 18:29:33 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2010-Jan-01 18:29:33 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Jan-01 18:29:33 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Jan-01 18:29:33 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Jan-01 18:29:33 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Jan-01 18:29:33 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Jan-01 18:29:33 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Jan-01 18:29:33 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Jan-01 18:29:33 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Jan-01 18:29:33 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2010-Jan-01 18:29:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2010-Jan-01 18:29:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2010-Jan-01 18:29:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2010-Jan-01 18:29:34 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Jan-01 18:29:34 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Jan-01 18:29:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-01 18:29:34 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2010-Jan-01 18:29:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Jan-01 18:29:34 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-01 18:29:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Jan-01 18:29:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-01 18:29:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2010-Jan-01 18:29:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-01 18:29:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-01 18:29:34 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2010-Jan-01 18:29:34 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-Jan-01 18:29:34 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Jan-01 18:29:34 LOG5 finish_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2010-Jan-01 18:29:34 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Jan-01 18:29:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-01 18:29:34 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Jan-01 18:29:34 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2010-Jan-01 18:29:34 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2010-Jan-01 18:29:34 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2010-Jan-01 18:29:34 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2010-Jan-01 18:29:34 LOG3 is_if_valid: Current source data: up 205.3 13.3 UP - - 95 0.0 2010-Jan-01 18:29:34 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2010-Jan-01 18:29:34 INFO5 is_if_valid: Condition parsed as: 1 2010-Jan-01 18:29:34 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2010-Jan-01 18:29:34 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2010-Jan-01 18:29:34 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2010-Jan-01 18:29:34 LOG5 begin_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2010-Jan-01 18:29:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2010-Jan-01 18:29:34 LOG3 track_source: Calling 'track_source galfasrc 011400.0 +301130 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2010-Jan-01 18:29:34 START begin_task: Starting task 'sending tracking commands' 2010-Jan-01 18:29:34 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2010-Jan-01 18:29:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2010-Jan-01 18:29:34 INFO1 track_source: Starting to track galfasrc 2010-Jan-01 18:29:34 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2010-Jan-01 18:29:34 LOG3 vw_send: To DATATAKING: set ra 011400.0 2010-Jan-01 18:29:34 LOG3 vw_send: To DATATAKING: set dec +301130 2010-Jan-01 18:29:34 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-01 18:29:34 LOG3 vw_send: To DATATAKING: pnt tr 011400.0 +301130 -CJ 2010-Jan-01 18:29:34 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Jan-01 18:29:34 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-01 18:29:34 LOG5 finish_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2010-Jan-01 18:29:34 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-01 18:29:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-01 18:29:34 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-01 18:29:34 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2010-Jan-01 18:29:34 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2010-Jan-01 18:29:34 LOG5 finish_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2010-Jan-01 18:29:34 DONE finish_task: DONE finished tracking: source 'galfasrc' 2010-Jan-01 18:29:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-01 18:29:35 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2010-Jan-01 18:29:35 LOG5 end_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2010-Jan-01 18:29:35 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2010-Jan-01 18:29:35 INFO1 run_command_line: Skipping line 'ELSEIF isup(galfasrc2) then' since an earlier condition already has been true 2010-Jan-01 18:29:35 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2010-Jan-01 18:29:35 INFO1 run_command_line: Skipping line 'GOTO galfasrc2' in non-true conditional branch 2010-Jan-01 18:29:35 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2010-Jan-01 18:29:35 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2010-Jan-01 18:29:35 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2010-Jan-01 18:29:35 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2010-Jan-01 18:29:35 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2010-Jan-01 18:29:35 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2010-Jan-01 18:29:35 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2010-Jan-01 18:29:35 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2010-Jan-01 18:29:35 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2010-Jan-01 18:29:35 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Jan-01 18:29:35 LOG5 begin_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2010-Jan-01 18:29:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Jan-01 18:29:35 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Jan-01 18:29:35 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-Jan-01 18:29:35 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Jan-01 18:29:35 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Jan-01 18:29:35 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2010-Jan-01 18:29:35 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Jan-01 18:29:35 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2010-Jan-01 18:29:35 LOG4 got_cormsg: From DATATAKING: set ra 011400.0 2010-Jan-01 18:29:35 LOG4 got_cormsg: From DATATAKING: set dec +301130 2010-Jan-01 18:29:35 LOG4 got_cormsg: From DATATAKING: vw% 011400.0 2010-Jan-01 18:29:35 LOG4 got_cormsg: From DATATAKING: vw% +301130 2010-Jan-01 18:29:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:29:35 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-01 18:29:35 LOG4 got_cormsg: From DATATAKING: pnt tr 011400.0 +301130 -CJ 2010-Jan-01 18:29:35 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Jan-01 18:29:35 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Jan-01 18:29:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:29:36 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Jan-01 18:29:36 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Jan-01 18:29:36 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Jan-01 18:29:36 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2010-Jan-01 18:29:36 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Jan-01 18:29:36 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Jan-01 18:29:36 LOG5 finish_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2010-Jan-01 18:29:36 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Jan-01 18:29:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-01 18:29:36 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Jan-01 18:29:36 LOG5 end_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2010-Jan-01 18:29:36 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2010-Jan-01 18:29:36 BEGIN begin_task: Starting task 'waiting on telescope' 2010-Jan-01 18:29:36 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2010-Jan-01 18:29:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Jan-01 18:29:36 LOG3 waittrk: Start waittrk 5 2010-Jan-01 18:29:36 START begin_task: Starting task 'waiting on telescope movement' 2010-Jan-01 18:29:36 LOG5 begin_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2010-Jan-01 18:29:41 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Jan-01 18:29:41 LOG5 end_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2010-Jan-01 18:29:41 START begin_task: Starting task 'waiting on telescope on source' 2010-Jan-01 18:29:41 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2010-Jan-01 18:29:42 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Jan-01 18:29:42 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2010-Jan-01 18:29:42 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Jan-01 18:29:42 INFO2 waittrk: Now tracking galfasrc 2010-Jan-01 18:29:42 LOG4 waittrk: Current telescope position: Az = 204.87 ZA = 13.31 2010-Jan-01 18:29:42 STOP finish_task: Finishing task 'waiting on telescope' 2010-Jan-01 18:29:42 LOG5 finish_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2010-Jan-01 18:29:42 DONE finish_task: DONE finished waiting: telescope on source 2010-Jan-01 18:29:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-01 18:29:42 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Jan-01 18:29:42 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2010-Jan-01 18:29:42 COMMAND run_command_line: EXECUTING command 20: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2010-Jan-01 18:29:42 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2010-Jan-01 18:29:42 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-01 18:29:42 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2010-Jan-01 18:29:42 BEGIN begin_task: Starting task 'smart frequency switching' 2010-Jan-01 18:29:42 LOG5 begin_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2010-Jan-01 18:29:42 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2010-Jan-01 18:29:42 INFO1 smartfreq: Starting pattern: Smart frequency switching 2010-Jan-01 18:29:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2010-Jan-01 18:29:42 START begin_task: Starting task 'selecting calibration type' 2010-Jan-01 18:29:42 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2010-Jan-01 18:29:42 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-01 18:29:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-01 18:29:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:29:42 START begin_task: Starting task 'waiting on setcal' 2010-Jan-01 18:29:42 LOG5 begin_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2010-Jan-01 18:29:42 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-01 18:29:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:29:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:29:42 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-01 18:29:42 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-01 18:29:42 LOG5 end_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2010-Jan-01 18:29:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-01 18:29:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-01 18:29:42 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-01 18:29:42 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-01 18:29:42 LOG5 begin_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2010-Jan-01 18:29:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:29:42 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-01 18:29:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-01 18:29:42 LOG5 end_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2010-Jan-01 18:29:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-01 18:29:42 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-01 18:29:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-01 18:29:42 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-01 18:29:42 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-01 18:29:42 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2010-Jan-01 18:29:43 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-01 18:29:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-01 18:29:43 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2010-Jan-01 18:29:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-01 18:29:43 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-01 18:29:43 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-01 18:29:43 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2010-Jan-01 18:29:43 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2010-Jan-01 18:29:43 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2010-Jan-01 18:29:43 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2010-Jan-01 18:29:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2010-Jan-01 18:29:43 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2010-Jan-01 18:29:43 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-Jan-01 18:29:43 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Jan-01 18:29:43 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-01 18:29:43 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-01 18:29:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-01 18:29:43 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2010-Jan-01 18:29:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2010-Jan-01 18:29:43 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-01 18:29:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-01 18:29:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-01 18:29:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-01 18:29:43 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2010-Jan-01 18:29:43 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Jan-01 18:29:43 START begin_task: Starting task 'adjusting WAPP power' 2010-Jan-01 18:29:43 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2010-Jan-01 18:29:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Jan-01 18:29:43 INFO2 adjust_power: Starting to adjust WAPP power 2010-Jan-01 18:29:43 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Jan-01 18:29:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Jan-01 18:29:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:29:43 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Jan-01 18:29:43 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2010-Jan-01 18:29:43 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Jan-01 18:29:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:29:43 NOTE WAPPDATA-new_file: New FITS file: wapp.20100101.a2048.0001.fits 2010-Jan-01 18:29:43 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100101.a2048.0001.fits} 2010-Jan-01 18:29:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:29:46 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-01 18:29:46 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Jan-01 18:29:46 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2010-Jan-01 18:29:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Jan-01 18:29:46 START begin_task: Starting task 'adjusting WAPP power' 2010-Jan-01 18:29:46 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2010-Jan-01 18:29:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Jan-01 18:29:46 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-01 18:29:46 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-01 18:29:46 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-01 18:29:46 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-01 18:29:46 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Jan-01 18:29:46 LOG5 begin_task: Level: (5) ID = <10117> Status = 0 0 0 0 ok 2010-Jan-01 18:29:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Jan-01 18:29:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:29:47 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-Jan-01 18:29:47 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 4 dB 2010-Jan-01 18:29:47 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 1 3 dB --- beam 3: 4 3 dB 2010-Jan-01 18:29:47 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 1 dB 2010-Jan-01 18:29:47 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Jan-01 18:29:47 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Jan-01 18:29:47 LOG5 end_task: Level: (5) ID = <10117> Status = 0 0 0 0 ok 2010-Jan-01 18:29:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.008 0.932 ALFA beam 1: 1.092 1.068 2010-Jan-01 18:29:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.036 0.921 ALFA beam 3: 0.927 1.010 2010-Jan-01 18:29:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.925 0.968 ALFA beam 5: 0.978 0.988 2010-Jan-01 18:29:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.950 1.112 ALFA beam 7: 1.052 1.084 2010-Jan-01 18:29:47 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Jan-01 18:29:47 LOG5 finish_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2010-Jan-01 18:29:47 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Jan-01 18:29:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-01 18:29:47 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Jan-01 18:29:47 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2010-Jan-01 18:29:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-01 18:29:47 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Jan-01 18:29:47 LOG5 finish_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2010-Jan-01 18:29:47 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Jan-01 18:29:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-01 18:29:47 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Jan-01 18:29:47 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2010-Jan-01 18:29:47 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2010-Jan-01 18:29:47 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-Jan-01 18:29:47 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-Jan-01 18:29:47 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:29:47 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00485 J 2010-Jan-01 18:29:47 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:29:47 LOG2 antvel: Parameters to Doppler: Topocentric 80986 2010 1 0.0 2010-Jan-01 18:29:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:29:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-Jan-01 18:29:47 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-Jan-01 18:29:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:29:47 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:29:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Jan-01 18:29:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:29:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2010-Jan-01 18:29:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:29:47 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2010-Jan-01 18:29:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2010-Jan-01 18:29:47 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.810044 2010.0048478338022 18.999933 2010-Jan-01 18:29:47 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333331 30.191666666666670 2010-Jan-01 18:29:47 LOG4 log_alfabeam: ALFABEAM 1 1.230745813281569 30.090973825779834 2010-Jan-01 18:29:47 LOG4 log_alfabeam: ALFABEAM 2 1.237949477229706 30.120451104929845 2010-Jan-01 18:29:47 LOG4 log_alfabeam: ALFABEAM 3 1.240578598384277 30.220981551014656 2010-Jan-01 18:29:47 LOG4 log_alfabeam: ALFABEAM 4 1.235906888284521 30.292454402417270 2010-Jan-01 18:29:47 LOG4 log_alfabeam: ALFABEAM 5 1.228660290124367 30.262563983075292 2010-Jan-01 18:29:47 LOG4 log_alfabeam: ALFABEAM 6 1.226128474999021 30.161617752279295 2010-Jan-01 18:29:47 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32797 2010-Jan-01 18:29:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:29:48 LOG5 begin_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2010-Jan-01 18:29:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:29:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Jan-01 18:29:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:29:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:29:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:29:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-Jan-01 18:29:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 80989.00 2010-Jan-01 18:29:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:29:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:29:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:29:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:29:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:29:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:29:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:29:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:29:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:29:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:29:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:29:59 LOG5 end_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2010-Jan-01 18:29:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:29:59 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2010-Jan-01 18:29:59 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2010-Jan-01 18:29:59 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-Jan-01 18:29:59 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-Jan-01 18:29:59 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:29:59 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00485 J 2010-Jan-01 18:29:59 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:29:59 LOG2 antvel: Parameters to Doppler: Topocentric 80999 2010 1 0.0 2010-Jan-01 18:29:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:29:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-Jan-01 18:29:59 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-Jan-01 18:29:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:29:59 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:29:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Jan-01 18:29:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:29:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2010-Jan-01 18:29:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:29:59 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2010-Jan-01 18:29:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2010-Jan-01 18:29:59 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.813665 2010.0048482457473 18.999933 2010-Jan-01 18:29:59 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333330 30.191666666666677 2010-Jan-01 18:29:59 LOG4 log_alfabeam: ALFABEAM 1 1.230773379055943 30.090855361837704 2010-Jan-01 18:29:59 LOG4 log_alfabeam: ALFABEAM 2 1.237968911146817 30.120663948794419 2010-Jan-01 18:29:59 LOG4 log_alfabeam: ALFABEAM 3 1.240570560197966 30.221314552718802 2010-Jan-01 18:29:59 LOG4 log_alfabeam: ALFABEAM 4 1.235879210187079 30.292572401358004 2010-Jan-01 18:29:59 LOG4 log_alfabeam: ALFABEAM 5 1.228640840232155 30.262348034903901 2010-Jan-01 18:29:59 LOG4 log_alfabeam: ALFABEAM 6 1.226136795423407 30.161285517481357 2010-Jan-01 18:29:59 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32798 2010-Jan-01 18:30:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:30:00 LOG5 begin_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2010-Jan-01 18:30:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:30:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Jan-01 18:30:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:30:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:30:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:30:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-Jan-01 18:30:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81001.00 2010-Jan-01 18:30:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:30:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:30:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:30:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:30:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:30:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:30:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:30:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:30:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:30:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:30:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:30:11 LOG5 end_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2010-Jan-01 18:30:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:30:11 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2010-Jan-01 18:30:11 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2010-Jan-01 18:30:11 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-Jan-01 18:30:11 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-Jan-01 18:30:11 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:30:11 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00485 J 2010-Jan-01 18:30:11 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:30:11 LOG2 antvel: Parameters to Doppler: Topocentric 81011 2010 1 0.0 2010-Jan-01 18:30:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:30:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-Jan-01 18:30:11 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-Jan-01 18:30:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:30:11 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:30:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Jan-01 18:30:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:30:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2010-Jan-01 18:30:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:30:11 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2010-Jan-01 18:30:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2010-Jan-01 18:30:11 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.817007 2010.0048486260046 18.999933 2010-Jan-01 18:30:11 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333333 30.191666666666677 2010-Jan-01 18:30:11 LOG4 log_alfabeam: ALFABEAM 1 1.230798925314716 30.090746831591495 2010-Jan-01 18:30:11 LOG4 log_alfabeam: ALFABEAM 2 1.237986849350943 30.120861773597998 2010-Jan-01 18:30:11 LOG4 log_alfabeam: ALFABEAM 3 1.240563037882759 30.221622483274210 2010-Jan-01 18:30:11 LOG4 log_alfabeam: ALFABEAM 4 1.235853560039972 30.292680494134004 2010-Jan-01 18:30:11 LOG4 log_alfabeam: ALFABEAM 5 1.228622888848457 30.262147335195394 2010-Jan-01 18:30:11 LOG4 log_alfabeam: ALFABEAM 6 1.226144578568729 30.160978317447618 2010-Jan-01 18:30:11 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32799 2010-Jan-01 18:30:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:30:12 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2010-Jan-01 18:30:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:30:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Jan-01 18:30:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:30:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:30:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:30:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-Jan-01 18:30:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81013.00 2010-Jan-01 18:30:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:30:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:30:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:30:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:30:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:30:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:30:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:30:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:30:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:30:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:30:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:30:23 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2010-Jan-01 18:30:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:30:23 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2010-Jan-01 18:30:23 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2010-Jan-01 18:30:23 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-Jan-01 18:30:23 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-Jan-01 18:30:23 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:30:23 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00485 J 2010-Jan-01 18:30:23 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:30:23 LOG2 antvel: Parameters to Doppler: Topocentric 81023 2010 1 0.0 2010-Jan-01 18:30:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:30:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-Jan-01 18:30:23 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-Jan-01 18:30:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:30:23 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:30:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Jan-01 18:30:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:30:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2010-Jan-01 18:30:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:30:23 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2010-Jan-01 18:30:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2010-Jan-01 18:30:23 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.820350 2010.0048490062616 18.999933 2010-Jan-01 18:30:23 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333332 30.191666666666670 2010-Jan-01 18:30:23 LOG4 log_alfabeam: ALFABEAM 1 1.230824579347497 30.090639054226354 2010-Jan-01 18:30:23 LOG4 log_alfabeam: ALFABEAM 2 1.238004793808766 30.121060987077318 2010-Jan-01 18:30:23 LOG4 log_alfabeam: ALFABEAM 3 1.240555413374592 30.221931061729521 2010-Jan-01 18:30:23 LOG4 log_alfabeam: ALFABEAM 4 1.235827801882568 30.292787825888706 2010-Jan-01 18:30:23 LOG4 log_alfabeam: ALFABEAM 5 1.228604932724421 30.261945236678706 2010-Jan-01 18:30:23 LOG4 log_alfabeam: ALFABEAM 6 1.226152464293980 30.160670491684495 2010-Jan-01 18:30:23 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32800 2010-Jan-01 18:30:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:30:24 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2010-Jan-01 18:30:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:30:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Jan-01 18:30:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:30:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:30:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:30:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-Jan-01 18:30:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81025.00 2010-Jan-01 18:30:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:30:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:30:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:30:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:30:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:30:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:30:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:30:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:30:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:30:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:30:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:30:35 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2010-Jan-01 18:30:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:30:35 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2010-Jan-01 18:30:35 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2010-Jan-01 18:30:35 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-Jan-01 18:30:35 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-Jan-01 18:30:35 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:30:35 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00485 J 2010-Jan-01 18:30:35 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:30:35 LOG2 antvel: Parameters to Doppler: Topocentric 81035 2010 1 0.0 2010-Jan-01 18:30:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:30:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-Jan-01 18:30:35 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-Jan-01 18:30:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:30:35 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:30:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Jan-01 18:30:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:30:35 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2010-Jan-01 18:30:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:30:35 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2010-Jan-01 18:30:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2010-Jan-01 18:30:35 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.823692 2010.0048493865186 18.999933 2010-Jan-01 18:30:35 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333331 30.191666666666677 2010-Jan-01 18:30:35 LOG4 log_alfabeam: ALFABEAM 1 1.230850325627316 30.090532105270103 2010-Jan-01 18:30:35 LOG4 log_alfabeam: ALFABEAM 2 1.238022733069117 30.121261473396402 2010-Jan-01 18:30:35 LOG4 log_alfabeam: ALFABEAM 3 1.240547690686151 30.222240095760089 2010-Jan-01 18:30:35 LOG4 log_alfabeam: ALFABEAM 4 1.235801951309985 30.292894321321889 2010-Jan-01 18:30:35 LOG4 log_alfabeam: ALFABEAM 5 1.228586983332471 30.261741857041645 2010-Jan-01 18:30:35 LOG4 log_alfabeam: ALFABEAM 6 1.226160448414147 30.160362232206776 2010-Jan-01 18:30:35 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32801 2010-Jan-01 18:30:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:30:36 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2010-Jan-01 18:30:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:30:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Jan-01 18:30:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:30:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:30:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:30:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-Jan-01 18:30:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81037.00 2010-Jan-01 18:30:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:30:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:30:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:30:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:30:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:30:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:30:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:30:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:30:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:30:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:30:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:30:47 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2010-Jan-01 18:30:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:30:47 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2010-Jan-01 18:30:47 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2010-Jan-01 18:30:47 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-Jan-01 18:30:47 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-Jan-01 18:30:47 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:30:47 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00485 J 2010-Jan-01 18:30:47 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:30:47 LOG2 antvel: Parameters to Doppler: Topocentric 81047 2010 1 0.0 2010-Jan-01 18:30:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:30:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-Jan-01 18:30:47 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-Jan-01 18:30:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:30:47 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:30:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Jan-01 18:30:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:30:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2010-Jan-01 18:30:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:30:47 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2010-Jan-01 18:30:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2010-Jan-01 18:30:47 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.827034 2010.0048497667756 18.999933 2010-Jan-01 18:30:47 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333324 30.191666666666670 2010-Jan-01 18:30:47 LOG4 log_alfabeam: ALFABEAM 1 1.230876171622751 30.090425963448290 2010-Jan-01 18:30:47 LOG4 log_alfabeam: ALFABEAM 2 1.238040671776831 30.121463295200599 2010-Jan-01 18:30:47 LOG4 log_alfabeam: ALFABEAM 3 1.240539867006958 30.222549669745884 2010-Jan-01 18:30:47 LOG4 log_alfabeam: ALFABEAM 4 1.235776000828512 30.293000001537479 2010-Jan-01 18:30:47 LOG4 log_alfabeam: ALFABEAM 5 1.228569036038296 30.261537132905829 2010-Jan-01 18:30:47 LOG4 log_alfabeam: ALFABEAM 6 1.226168533801502 30.160053454995268 2010-Jan-01 18:30:47 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32802 2010-Jan-01 18:30:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:30:48 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2010-Jan-01 18:30:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:30:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Jan-01 18:30:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:30:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:30:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:30:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-Jan-01 18:30:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81049.00 2010-Jan-01 18:30:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:30:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:30:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:30:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:30:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:30:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:30:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:30:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:30:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:30:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:30:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:30:59 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2010-Jan-01 18:30:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:30:59 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2010-Jan-01 18:30:59 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2010-Jan-01 18:30:59 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-Jan-01 18:30:59 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-Jan-01 18:30:59 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:30:59 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00485 J 2010-Jan-01 18:30:59 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:30:59 LOG2 antvel: Parameters to Doppler: Topocentric 81059 2010 1 0.0 2010-Jan-01 18:30:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:30:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-Jan-01 18:30:59 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-Jan-01 18:30:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:30:59 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:30:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Jan-01 18:30:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:30:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2010-Jan-01 18:30:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:30:59 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2010-Jan-01 18:30:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2010-Jan-01 18:30:59 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.830377 2010.0048501470326 18.999933 2010-Jan-01 18:30:59 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333327 30.191666666666677 2010-Jan-01 18:30:59 LOG4 log_alfabeam: ALFABEAM 1 1.230902124910264 30.090320608488803 2010-Jan-01 18:30:59 LOG4 log_alfabeam: ALFABEAM 2 1.238058614568723 30.121666516639173 2010-Jan-01 18:30:59 LOG4 log_alfabeam: ALFABEAM 3 1.240531939409738 30.222859868580752 2010-Jan-01 18:30:59 LOG4 log_alfabeam: ALFABEAM 4 1.235749942836393 30.293104886628299 2010-Jan-01 18:30:59 LOG4 log_alfabeam: ALFABEAM 5 1.228551086217391 30.261330999381101 2010-Jan-01 18:30:59 LOG4 log_alfabeam: ALFABEAM 6 1.226176723445219 30.159744075542051 2010-Jan-01 18:30:59 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32803 2010-Jan-01 18:31:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:31:00 LOG5 begin_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2010-Jan-01 18:31:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:31:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Jan-01 18:31:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:31:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:31:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:31:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-Jan-01 18:31:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81061.00 2010-Jan-01 18:31:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:31:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:31:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:31:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:31:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:31:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:31:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:31:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:31:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:31:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:31:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:31:11 LOG5 end_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2010-Jan-01 18:31:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:31:11 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2010-Jan-01 18:31:11 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-Jan-01 18:31:11 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-01 18:31:11 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-01 18:31:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-01 18:31:11 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2010-Jan-01 18:31:11 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-01 18:31:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-01 18:31:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-01 18:31:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-01 18:31:11 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2010-Jan-01 18:31:11 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2010-Jan-01 18:31:11 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-Jan-01 18:31:11 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-Jan-01 18:31:11 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:31:11 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00485 J 2010-Jan-01 18:31:11 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:31:11 LOG2 antvel: Parameters to Doppler: Topocentric 81071 2010 1 0.0 2010-Jan-01 18:31:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:31:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-Jan-01 18:31:11 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-Jan-01 18:31:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:31:11 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:31:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Jan-01 18:31:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:31:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2010-Jan-01 18:31:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:31:11 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2010-Jan-01 18:31:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2010-Jan-01 18:31:11 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.833719 2010.0048505272898 18.999933 2010-Jan-01 18:31:11 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333323 30.191666666666677 2010-Jan-01 18:31:11 LOG4 log_alfabeam: ALFABEAM 1 1.230928169749297 30.090216114578439 2010-Jan-01 18:31:11 LOG4 log_alfabeam: ALFABEAM 2 1.238076549972472 30.121871019194778 2010-Jan-01 18:31:11 LOG4 log_alfabeam: ALFABEAM 3 1.240523912100761 30.223170498573293 2010-Jan-01 18:31:11 LOG4 log_alfabeam: ALFABEAM 4 1.235723793142947 30.293208902651710 2010-Jan-01 18:31:11 LOG4 log_alfabeam: ALFABEAM 5 1.228533145360330 30.261123576861376 2010-Jan-01 18:31:11 LOG4 log_alfabeam: ALFABEAM 6 1.226185012965410 30.159434287184204 2010-Jan-01 18:31:11 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32804 2010-Jan-01 18:31:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:31:12 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2010-Jan-01 18:31:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:31:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Jan-01 18:31:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:31:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:31:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:31:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-Jan-01 18:31:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81073.00 2010-Jan-01 18:31:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:31:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:31:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:31:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:31:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:31:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:31:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:31:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:31:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:31:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:31:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:31:23 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2010-Jan-01 18:31:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:31:23 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2010-Jan-01 18:31:23 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2010-Jan-01 18:31:23 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-Jan-01 18:31:23 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-Jan-01 18:31:23 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:31:23 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00485 J 2010-Jan-01 18:31:23 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:31:23 LOG2 antvel: Parameters to Doppler: Topocentric 81083 2010 1 0.0 2010-Jan-01 18:31:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:31:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-Jan-01 18:31:23 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-Jan-01 18:31:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:31:23 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:31:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Jan-01 18:31:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:31:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2010-Jan-01 18:31:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:31:23 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2010-Jan-01 18:31:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2010-Jan-01 18:31:23 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.837062 2010.0048509075468 18.999933 2010-Jan-01 18:31:23 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333323 30.191666666666677 2010-Jan-01 18:31:23 LOG4 log_alfabeam: ALFABEAM 1 1.230954321500833 30.090112430377303 2010-Jan-01 18:31:23 LOG4 log_alfabeam: ALFABEAM 2 1.238094487976169 30.122076928216462 2010-Jan-01 18:31:23 LOG4 log_alfabeam: ALFABEAM 3 1.240515779743855 30.223481737371593 2010-Jan-01 18:31:23 LOG4 log_alfabeam: ALFABEAM 4 1.235697536330743 30.293312100625368 2010-Jan-01 18:31:23 LOG4 log_alfabeam: ALFABEAM 5 1.228515203489897 30.260914738387438 2010-Jan-01 18:31:23 LOG4 log_alfabeam: ALFABEAM 6 1.226193407838197 30.159123912911561 2010-Jan-01 18:31:23 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32805 2010-Jan-01 18:31:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:31:24 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2010-Jan-01 18:31:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:31:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Jan-01 18:31:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:31:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:31:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:31:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-Jan-01 18:31:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81085.00 2010-Jan-01 18:31:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:31:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:31:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:31:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:31:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:31:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:31:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:31:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:31:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:31:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:31:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:31:35 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2010-Jan-01 18:31:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:31:35 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2010-Jan-01 18:31:35 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2010-Jan-01 18:31:35 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-Jan-01 18:31:35 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-Jan-01 18:31:35 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:31:35 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00485 J 2010-Jan-01 18:31:35 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:31:35 LOG2 antvel: Parameters to Doppler: Topocentric 81095 2010 1 0.0 2010-Jan-01 18:31:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:31:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-Jan-01 18:31:35 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-Jan-01 18:31:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:31:35 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:31:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Jan-01 18:31:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:31:35 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2010-Jan-01 18:31:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:31:35 LOG5 begin_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2010-Jan-01 18:31:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2010-Jan-01 18:31:35 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.840404 2010.0048512878038 18.999933 2010-Jan-01 18:31:35 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333332 30.191666666666670 2010-Jan-01 18:31:35 LOG4 log_alfabeam: ALFABEAM 1 1.230980564282026 30.090009629136613 2010-Jan-01 18:31:35 LOG4 log_alfabeam: ALFABEAM 2 1.238112417095853 30.122284123380485 2010-Jan-01 18:31:35 LOG4 log_alfabeam: ALFABEAM 3 1.240507546676837 30.223793390395834 2010-Jan-01 18:31:35 LOG4 log_alfabeam: ALFABEAM 4 1.235671188351852 30.293414407553612 2010-Jan-01 18:31:35 LOG4 log_alfabeam: ALFABEAM 5 1.228497272106331 30.260704606175764 2010-Jan-01 18:31:35 LOG4 log_alfabeam: ALFABEAM 6 1.226201903551495 30.158813146919258 2010-Jan-01 18:31:35 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32806 2010-Jan-01 18:31:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:31:36 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2010-Jan-01 18:31:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:31:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Jan-01 18:31:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:31:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:31:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:31:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-Jan-01 18:31:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81097.00 2010-Jan-01 18:31:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:31:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:31:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:31:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:31:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:31:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:31:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:31:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:31:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:31:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:31:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:31:47 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2010-Jan-01 18:31:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:31:47 LOG5 end_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2010-Jan-01 18:31:47 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2010-Jan-01 18:31:47 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-Jan-01 18:31:47 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-Jan-01 18:31:47 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:31:47 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00485 J 2010-Jan-01 18:31:47 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:31:47 LOG2 antvel: Parameters to Doppler: Topocentric 81107 2010 1 0.0 2010-Jan-01 18:31:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:31:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-Jan-01 18:31:47 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-Jan-01 18:31:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:31:47 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:31:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Jan-01 18:31:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:31:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2010-Jan-01 18:31:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:31:47 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2010-Jan-01 18:31:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2010-Jan-01 18:31:47 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.843747 2010.0048516680608 18.999933 2010-Jan-01 18:31:47 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333330 30.191666666666670 2010-Jan-01 18:31:47 LOG4 log_alfabeam: ALFABEAM 1 1.231006913548437 30.089907660589883 2010-Jan-01 18:31:47 LOG4 log_alfabeam: ALFABEAM 2 1.238130347301359 30.122492731444840 2010-Jan-01 18:31:47 LOG4 log_alfabeam: ALFABEAM 3 1.240499207449666 30.224105635639631 2010-Jan-01 18:31:47 LOG4 log_alfabeam: ALFABEAM 4 1.235644733694169 30.293515873372431 2010-Jan-01 18:31:47 LOG4 log_alfabeam: ALFABEAM 5 1.228479341252360 30.260493051853700 2010-Jan-01 18:31:47 LOG4 log_alfabeam: ALFABEAM 6 1.226210505694971 30.158501811875311 2010-Jan-01 18:31:47 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32807 2010-Jan-01 18:31:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:31:48 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2010-Jan-01 18:31:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:31:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Jan-01 18:31:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:31:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:31:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:31:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-Jan-01 18:31:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81109.00 2010-Jan-01 18:31:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:31:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:31:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:31:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:31:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:31:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:31:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:31:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:31:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:31:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:31:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:31:59 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2010-Jan-01 18:31:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:31:59 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2010-Jan-01 18:31:59 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2010-Jan-01 18:31:59 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-Jan-01 18:31:59 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-Jan-01 18:31:59 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:31:59 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00485 J 2010-Jan-01 18:31:59 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:31:59 LOG2 antvel: Parameters to Doppler: Topocentric 81119 2010 1 0.0 2010-Jan-01 18:31:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:31:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-Jan-01 18:31:59 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-Jan-01 18:31:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:31:59 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:31:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Jan-01 18:31:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:31:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2010-Jan-01 18:31:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:31:59 LOG5 begin_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2010-Jan-01 18:31:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2010-Jan-01 18:31:59 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.847089 2010.0048520483178 18.999933 2010-Jan-01 18:31:59 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333334 30.191666666666670 2010-Jan-01 18:31:59 LOG4 log_alfabeam: ALFABEAM 1 1.231033353275008 30.089806597018839 2010-Jan-01 18:31:59 LOG4 log_alfabeam: ALFABEAM 2 1.238148267099089 30.122702630264882 2010-Jan-01 18:31:59 LOG4 log_alfabeam: ALFABEAM 3 1.240490766533569 30.224418277654152 2010-Jan-01 18:31:59 LOG4 log_alfabeam: ALFABEAM 4 1.235618188452395 30.293616426067032 2010-Jan-01 18:31:59 LOG4 log_alfabeam: ALFABEAM 5 1.228461422435849 30.260280199474462 2010-Jan-01 18:31:59 LOG4 log_alfabeam: ALFABEAM 6 1.226219209622433 30.158190102813027 2010-Jan-01 18:31:59 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32808 2010-Jan-01 18:32:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:32:00 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2010-Jan-01 18:32:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:32:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Jan-01 18:32:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:32:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:32:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:32:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-Jan-01 18:32:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81121.00 2010-Jan-01 18:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:32:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:32:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:32:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:32:11 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2010-Jan-01 18:32:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:32:11 LOG5 end_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2010-Jan-01 18:32:11 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2010-Jan-01 18:32:11 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-Jan-01 18:32:11 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-Jan-01 18:32:11 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:32:11 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00485 J 2010-Jan-01 18:32:11 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:32:11 LOG2 antvel: Parameters to Doppler: Topocentric 81131 2010 1 0.0 2010-Jan-01 18:32:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:32:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-Jan-01 18:32:11 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-Jan-01 18:32:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:32:11 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:32:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Jan-01 18:32:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:32:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2010-Jan-01 18:32:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:32:11 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2010-Jan-01 18:32:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2010-Jan-01 18:32:11 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.850432 2010.0048524285751 18.999933 2010-Jan-01 18:32:11 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333333 30.191666666666659 2010-Jan-01 18:32:11 LOG4 log_alfabeam: ALFABEAM 1 1.231059899010886 30.089706389250320 2010-Jan-01 18:32:11 LOG4 log_alfabeam: ALFABEAM 2 1.238166186439029 30.122913948006627 2010-Jan-01 18:32:11 LOG4 log_alfabeam: ALFABEAM 3 1.240482218364099 30.224731494757570 2010-Jan-01 18:32:11 LOG4 log_alfabeam: ALFABEAM 4 1.235591537020864 30.293716114471888 2010-Jan-01 18:32:11 LOG4 log_alfabeam: ALFABEAM 5 1.228443505721131 30.260065919253393 2010-Jan-01 18:32:11 LOG4 log_alfabeam: ALFABEAM 6 1.226228021037728 30.157877842099673 2010-Jan-01 18:32:11 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32809 2010-Jan-01 18:32:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:32:12 LOG5 begin_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2010-Jan-01 18:32:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:32:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Jan-01 18:32:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:32:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:32:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:32:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-Jan-01 18:32:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81133.00 2010-Jan-01 18:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:32:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:32:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:32:23 LOG5 end_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2010-Jan-01 18:32:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:32:23 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2010-Jan-01 18:32:23 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2010-Jan-01 18:32:23 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-Jan-01 18:32:23 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-Jan-01 18:32:23 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:32:23 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00485 J 2010-Jan-01 18:32:23 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:32:23 LOG2 antvel: Parameters to Doppler: Topocentric 81143 2010 1 0.0 2010-Jan-01 18:32:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:32:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-Jan-01 18:32:23 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-Jan-01 18:32:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:32:23 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:32:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Jan-01 18:32:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:32:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2010-Jan-01 18:32:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:32:23 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2010-Jan-01 18:32:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2010-Jan-01 18:32:23 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.853774 2010.0048528088321 18.999933 2010-Jan-01 18:32:23 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333325 30.191666666666677 2010-Jan-01 18:32:23 LOG4 log_alfabeam: ALFABEAM 1 1.231086534588974 30.089607108562276 2010-Jan-01 18:32:23 LOG4 log_alfabeam: ALFABEAM 2 1.238184093819965 30.123126560690526 2010-Jan-01 18:32:23 LOG4 log_alfabeam: ALFABEAM 3 1.240473567547822 30.225045090652252 2010-Jan-01 18:32:23 LOG4 log_alfabeam: ALFABEAM 4 1.235564795636704 30.293814867587606 2010-Jan-01 18:32:23 LOG4 log_alfabeam: ALFABEAM 5 1.228425602621573 30.259850337094004 2010-Jan-01 18:32:23 LOG4 log_alfabeam: ALFABEAM 6 1.226236935158677 30.157565225585877 2010-Jan-01 18:32:23 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32810 2010-Jan-01 18:32:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:32:24 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2010-Jan-01 18:32:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:32:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Jan-01 18:32:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:32:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:32:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:32:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-Jan-01 18:32:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81145.00 2010-Jan-01 18:32:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:32:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:32:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:32:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:32:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:32:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:32:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:32:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:32:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:32:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:32:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:32:35 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2010-Jan-01 18:32:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:32:35 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2010-Jan-01 18:32:35 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2010-Jan-01 18:32:35 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-Jan-01 18:32:35 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Jan-01 18:32:35 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-01 18:32:35 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-01 18:32:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-01 18:32:35 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2010-Jan-01 18:32:35 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-01 18:32:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-01 18:32:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-01 18:32:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-01 18:32:35 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2010-Jan-01 18:32:35 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Jan-01 18:32:35 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2010-Jan-01 18:32:35 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-Jan-01 18:32:35 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-Jan-01 18:32:35 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:32:35 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00485 J 2010-Jan-01 18:32:35 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:32:35 LOG2 antvel: Parameters to Doppler: Topocentric 81155 2010 1 0.0 2010-Jan-01 18:32:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:32:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-Jan-01 18:32:35 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-Jan-01 18:32:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:32:35 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:32:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Jan-01 18:32:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:32:35 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2010-Jan-01 18:32:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:32:35 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2010-Jan-01 18:32:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2010-Jan-01 18:32:35 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.857117 2010.0048531890891 18.999933 2010-Jan-01 18:32:35 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333328 30.191666666666670 2010-Jan-01 18:32:35 LOG4 log_alfabeam: ALFABEAM 1 1.231113275650915 30.089508706894399 2010-Jan-01 18:32:35 LOG4 log_alfabeam: ALFABEAM 2 1.238201999170468 30.123340597889126 2010-Jan-01 18:32:35 LOG4 log_alfabeam: ALFABEAM 3 1.240464808405343 30.225359243959634 2010-Jan-01 18:32:35 LOG4 log_alfabeam: ALFABEAM 4 1.235537948601775 30.293912733127424 2010-Jan-01 18:32:35 LOG4 log_alfabeam: ALFABEAM 5 1.228407703224781 30.259633321801410 2010-Jan-01 18:32:35 LOG4 log_alfabeam: ALFABEAM 6 1.226245957803808 30.157252075359438 2010-Jan-01 18:32:35 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32811 2010-Jan-01 18:32:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:32:36 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2010-Jan-01 18:32:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:32:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Jan-01 18:32:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:32:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:32:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:32:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2010-Jan-01 18:32:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81157.00 2010-Jan-01 18:32:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:32:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:32:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:32:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:32:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:32:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:32:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:32:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:32:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:32:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:32:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:32:47 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2010-Jan-01 18:32:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:32:47 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2010-Jan-01 18:32:47 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2010-Jan-01 18:32:47 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-Jan-01 18:32:47 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-Jan-01 18:32:47 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:32:47 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00485 J 2010-Jan-01 18:32:47 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:32:47 LOG2 antvel: Parameters to Doppler: Topocentric 81167 2010 1 0.0 2010-Jan-01 18:32:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:32:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-Jan-01 18:32:47 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-Jan-01 18:32:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:32:47 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:32:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Jan-01 18:32:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:32:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2010-Jan-01 18:32:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:32:47 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2010-Jan-01 18:32:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2010-Jan-01 18:32:47 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.860459 2010.0048535693461 18.999933 2010-Jan-01 18:32:47 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333319 30.191666666666677 2010-Jan-01 18:32:47 LOG4 log_alfabeam: ALFABEAM 1 1.231140105887823 30.089411254486219 2010-Jan-01 18:32:47 LOG4 log_alfabeam: ALFABEAM 2 1.238219890983767 30.123555933774615 2010-Jan-01 18:32:47 LOG4 log_alfabeam: ALFABEAM 3 1.240455945680376 30.225673757554560 2010-Jan-01 18:32:47 LOG4 log_alfabeam: ALFABEAM 4 1.235511012295319 30.294009641142161 2010-Jan-01 18:32:47 LOG4 log_alfabeam: ALFABEAM 5 1.228389819047439 30.259415001142642 2010-Jan-01 18:32:47 LOG4 log_alfabeam: ALFABEAM 6 1.226255084053124 30.156938588066648 2010-Jan-01 18:32:47 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32812 2010-Jan-01 18:32:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:32:48 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2010-Jan-01 18:32:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:32:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Jan-01 18:32:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:32:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:32:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:32:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2010-Jan-01 18:32:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81169.00 2010-Jan-01 18:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:32:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:32:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:32:59 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2010-Jan-01 18:32:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:32:59 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2010-Jan-01 18:32:59 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2010-Jan-01 18:32:59 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-Jan-01 18:32:59 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-Jan-01 18:32:59 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:32:59 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00485 J 2010-Jan-01 18:32:59 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:32:59 LOG2 antvel: Parameters to Doppler: Topocentric 81179 2010 1 0.0 2010-Jan-01 18:32:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:32:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-Jan-01 18:32:59 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-Jan-01 18:32:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:32:59 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:32:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Jan-01 18:32:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:32:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2010-Jan-01 18:32:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:32:59 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2010-Jan-01 18:32:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2010-Jan-01 18:32:59 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.863802 2010.0048539496031 18.999933 2010-Jan-01 18:32:59 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333336 30.191666666666670 2010-Jan-01 18:32:59 LOG4 log_alfabeam: ALFABEAM 1 1.231167041032727 30.089314704409809 2010-Jan-01 18:32:59 LOG4 log_alfabeam: ALFABEAM 2 1.238237779165368 30.123772699323986 2010-Jan-01 18:32:59 LOG4 log_alfabeam: ALFABEAM 3 1.240446973578074 30.225988810340162 2010-Jan-01 18:32:59 LOG4 log_alfabeam: ALFABEAM 4 1.235483970927915 30.294105638204453 2010-Jan-01 18:32:59 LOG4 log_alfabeam: ALFABEAM 5 1.228371940202089 30.259195242514959 2010-Jan-01 18:32:59 LOG4 log_alfabeam: ALFABEAM 6 1.226264319840331 30.156624585537500 2010-Jan-01 18:32:59 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32813 2010-Jan-01 18:33:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:33:00 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2010-Jan-01 18:33:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:33:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Jan-01 18:33:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:33:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:33:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:33:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2010-Jan-01 18:33:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81181.00 2010-Jan-01 18:33:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:33:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:33:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:33:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:33:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:33:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:33:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:33:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:33:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:33:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:33:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:33:11 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2010-Jan-01 18:33:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:33:11 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2010-Jan-01 18:33:11 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2010-Jan-01 18:33:11 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-Jan-01 18:33:11 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-Jan-01 18:33:11 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:33:11 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00485 J 2010-Jan-01 18:33:11 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:33:11 LOG2 antvel: Parameters to Doppler: Topocentric 81191 2010 1 0.0 2010-Jan-01 18:33:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:33:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-Jan-01 18:33:11 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-Jan-01 18:33:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:33:11 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:33:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Jan-01 18:33:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:33:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2010-Jan-01 18:33:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:33:11 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2010-Jan-01 18:33:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2010-Jan-01 18:33:11 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.867144 2010.0048543298603 18.999933 2010-Jan-01 18:33:11 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333327 30.191666666666674 2010-Jan-01 18:33:11 LOG4 log_alfabeam: ALFABEAM 1 1.231194064635286 30.089219125831221 2010-Jan-01 18:33:11 LOG4 log_alfabeam: ALFABEAM 2 1.238255652205145 30.123990766848262 2010-Jan-01 18:33:11 LOG4 log_alfabeam: ALFABEAM 3 1.240437896981219 30.226304204385873 2010-Jan-01 18:33:11 LOG4 log_alfabeam: ALFABEAM 4 1.235456841020578 30.294200655450517 2010-Jan-01 18:33:11 LOG4 log_alfabeam: ALFABEAM 5 1.228354078206554 30.258974175561317 2010-Jan-01 18:33:11 LOG4 log_alfabeam: ALFABEAM 6 1.226273660105790 30.156310265191124 2010-Jan-01 18:33:11 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32814 2010-Jan-01 18:33:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:33:12 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2010-Jan-01 18:33:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:33:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Jan-01 18:33:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:33:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:33:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:33:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2010-Jan-01 18:33:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81193.00 2010-Jan-01 18:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:33:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:33:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:33:23 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2010-Jan-01 18:33:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:33:23 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2010-Jan-01 18:33:23 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2010-Jan-01 18:33:23 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-Jan-01 18:33:23 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-Jan-01 18:33:23 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:33:23 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00485 J 2010-Jan-01 18:33:23 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:33:23 LOG2 antvel: Parameters to Doppler: Topocentric 81203 2010 1 0.0 2010-Jan-01 18:33:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:33:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-Jan-01 18:33:23 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-Jan-01 18:33:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:33:23 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:33:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Jan-01 18:33:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:33:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2010-Jan-01 18:33:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:33:23 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2010-Jan-01 18:33:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2010-Jan-01 18:33:23 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.870486 2010.0048547101173 18.999933 2010-Jan-01 18:33:23 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333319 30.191666666666674 2010-Jan-01 18:33:23 LOG4 log_alfabeam: ALFABEAM 1 1.231221184389497 30.089124501143992 2010-Jan-01 18:33:23 LOG4 log_alfabeam: ALFABEAM 2 1.238273514640678 30.124210202861406 2010-Jan-01 18:33:23 LOG4 log_alfabeam: ALFABEAM 3 1.240428712743244 30.226620024291570 2010-Jan-01 18:33:23 LOG4 log_alfabeam: ALFABEAM 4 1.235429614854763 30.294294710295052 2010-Jan-01 18:33:23 LOG4 log_alfabeam: ALFABEAM 5 1.228336228538988 30.258751733039873 2010-Jan-01 18:33:23 LOG4 log_alfabeam: ALFABEAM 6 1.226283108055598 30.155995542852857 2010-Jan-01 18:33:23 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32815 2010-Jan-01 18:33:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:33:24 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2010-Jan-01 18:33:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:33:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Jan-01 18:33:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:33:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:33:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:33:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2010-Jan-01 18:33:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81205.00 2010-Jan-01 18:33:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:33:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:33:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:33:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:33:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:33:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:33:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:33:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:33:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:33:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:33:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:33:35 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2010-Jan-01 18:33:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:33:35 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2010-Jan-01 18:33:35 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2010-Jan-01 18:33:35 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-Jan-01 18:33:35 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-Jan-01 18:33:35 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:33:35 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00486 J 2010-Jan-01 18:33:35 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:33:35 LOG2 antvel: Parameters to Doppler: Topocentric 81215 2010 1 0.0 2010-Jan-01 18:33:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:33:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-Jan-01 18:33:35 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-Jan-01 18:33:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:33:35 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:33:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Jan-01 18:33:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:33:35 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2010-Jan-01 18:33:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:33:35 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2010-Jan-01 18:33:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2010-Jan-01 18:33:35 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.873829 2010.0048550903743 18.999933 2010-Jan-01 18:33:35 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333330 30.191666666666670 2010-Jan-01 18:33:35 LOG4 log_alfabeam: ALFABEAM 1 1.231248408091595 30.089030813895455 2010-Jan-01 18:33:35 LOG4 log_alfabeam: ALFABEAM 2 1.238291370990235 30.124431075396146 2010-Jan-01 18:33:35 LOG4 log_alfabeam: ALFABEAM 3 1.240419417595040 30.226936355033562 2010-Jan-01 18:33:35 LOG4 log_alfabeam: ALFABEAM 4 1.235402284609777 30.294387818989627 2010-Jan-01 18:33:35 LOG4 log_alfabeam: ALFABEAM 5 1.228318386698857 30.258527846184236 2010-Jan-01 18:33:35 LOG4 log_alfabeam: ALFABEAM 6 1.226292667018327 30.155680333997832 2010-Jan-01 18:33:35 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32816 2010-Jan-01 18:33:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:33:36 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2010-Jan-01 18:33:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:33:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Jan-01 18:33:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:33:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:33:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:33:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2010-Jan-01 18:33:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81217.00 2010-Jan-01 18:33:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:33:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:33:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:33:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:33:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:33:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:33:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:33:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:33:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:33:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:33:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:33:47 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2010-Jan-01 18:33:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:33:47 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2010-Jan-01 18:33:47 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2010-Jan-01 18:33:47 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-Jan-01 18:33:47 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-Jan-01 18:33:47 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:33:47 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00486 J 2010-Jan-01 18:33:47 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:33:47 LOG2 antvel: Parameters to Doppler: Topocentric 81227 2010 1 0.0 2010-Jan-01 18:33:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:33:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-Jan-01 18:33:47 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-Jan-01 18:33:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:33:47 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:33:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Jan-01 18:33:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:33:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2010-Jan-01 18:33:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:33:47 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2010-Jan-01 18:33:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2010-Jan-01 18:33:47 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.877171 2010.0048554706314 18.999933 2010-Jan-01 18:33:47 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333324 30.191666666666677 2010-Jan-01 18:33:47 LOG4 log_alfabeam: ALFABEAM 1 1.231275719079864 30.088938131574949 2010-Jan-01 18:33:47 LOG4 log_alfabeam: ALFABEAM 2 1.238309209742848 30.124653253949038 2010-Jan-01 18:33:47 LOG4 log_alfabeam: ALFABEAM 3 1.240410016631441 30.227252997516967 2010-Jan-01 18:33:47 LOG4 log_alfabeam: ALFABEAM 4 1.235374867018435 30.294479914365461 2010-Jan-01 18:33:47 LOG4 log_alfabeam: ALFABEAM 5 1.228300564201410 30.258302647473343 2010-Jan-01 18:33:47 LOG4 log_alfabeam: ALFABEAM 6 1.226302331721509 30.155364837159741 2010-Jan-01 18:33:47 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32817 2010-Jan-01 18:33:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:33:48 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2010-Jan-01 18:33:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:33:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Jan-01 18:33:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:33:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:33:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:33:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2010-Jan-01 18:33:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81229.00 2010-Jan-01 18:33:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:33:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:33:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:33:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:33:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:33:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:33:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:33:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:33:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:33:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:33:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:33:59 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2010-Jan-01 18:33:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:33:59 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2010-Jan-01 18:33:59 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-Jan-01 18:33:59 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-01 18:33:59 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-01 18:33:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-01 18:33:59 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-Jan-01 18:33:59 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-01 18:33:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-01 18:33:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-01 18:33:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-01 18:33:59 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-Jan-01 18:33:59 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2010-Jan-01 18:33:59 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-Jan-01 18:33:59 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2010-Jan-01 18:33:59 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:33:59 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00486 J 2010-Jan-01 18:33:59 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:33:59 LOG2 antvel: Parameters to Doppler: Topocentric 81239 2010 1 0.0 2010-Jan-01 18:33:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:33:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2010-Jan-01 18:33:59 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2010-Jan-01 18:33:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:33:59 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:33:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Jan-01 18:33:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:33:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2010-Jan-01 18:33:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:33:59 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2010-Jan-01 18:33:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2010-Jan-01 18:33:59 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.880514 2010.0048558508884 18.999933 2010-Jan-01 18:33:59 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333327 30.191666666666670 2010-Jan-01 18:33:59 LOG4 log_alfabeam: ALFABEAM 1 1.231303133310470 30.088846410169037 2010-Jan-01 18:33:59 LOG4 log_alfabeam: ALFABEAM 2 1.238327040739065 30.124876872996118 2010-Jan-01 18:33:59 LOG4 log_alfabeam: ALFABEAM 3 1.240400503766796 30.227570131252595 2010-Jan-01 18:33:59 LOG4 log_alfabeam: ALFABEAM 4 1.235347346068320 30.294571040060035 2010-Jan-01 18:33:59 LOG4 log_alfabeam: ALFABEAM 5 1.228282751228689 30.258076000798930 2010-Jan-01 18:33:59 LOG4 log_alfabeam: ALFABEAM 6 1.226312108388622 30.155048873620995 2010-Jan-01 18:33:59 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32818 2010-Jan-01 18:34:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:34:00 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2010-Jan-01 18:34:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:34:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2010-Jan-01 18:34:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:34:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:34:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:34:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2010-Jan-01 18:34:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81241.00 2010-Jan-01 18:34:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:34:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:34:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:34:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:34:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:34:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:34:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:34:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:34:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:34:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:34:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:34:11 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2010-Jan-01 18:34:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:34:11 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2010-Jan-01 18:34:11 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2010-Jan-01 18:34:11 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-Jan-01 18:34:11 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2010-Jan-01 18:34:11 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:34:11 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00486 J 2010-Jan-01 18:34:11 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:34:11 LOG2 antvel: Parameters to Doppler: Topocentric 81251 2010 1 0.0 2010-Jan-01 18:34:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:34:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2010-Jan-01 18:34:11 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2010-Jan-01 18:34:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:34:11 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:34:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Jan-01 18:34:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:34:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2010-Jan-01 18:34:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:34:11 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2010-Jan-01 18:34:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2010-Jan-01 18:34:11 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.883856 2010.0048562311456 18.999933 2010-Jan-01 18:34:11 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333329 30.191666666666670 2010-Jan-01 18:34:11 LOG4 log_alfabeam: ALFABEAM 1 1.231330633981522 30.088755716004140 2010-Jan-01 18:34:11 LOG4 log_alfabeam: ALFABEAM 2 1.238344852470253 30.125101800143163 2010-Jan-01 18:34:11 LOG4 log_alfabeam: ALFABEAM 3 1.240390884239643 30.227887556399896 2010-Jan-01 18:34:11 LOG4 log_alfabeam: ALFABEAM 4 1.235319738632857 30.294661130079540 2010-Jan-01 18:34:11 LOG4 log_alfabeam: ALFABEAM 5 1.228264959291336 30.257848040544420 2010-Jan-01 18:34:11 LOG4 log_alfabeam: ALFABEAM 6 1.226321991603187 30.154732642627177 2010-Jan-01 18:34:11 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32819 2010-Jan-01 18:34:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:34:12 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2010-Jan-01 18:34:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:34:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2010-Jan-01 18:34:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:34:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:34:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:34:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2010-Jan-01 18:34:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81253.00 2010-Jan-01 18:34:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:34:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:34:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:34:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:34:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:34:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:34:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:34:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:34:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:34:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:34:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:34:23 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2010-Jan-01 18:34:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:34:23 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2010-Jan-01 18:34:23 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2010-Jan-01 18:34:23 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-Jan-01 18:34:23 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2010-Jan-01 18:34:23 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:34:23 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00486 J 2010-Jan-01 18:34:23 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:34:23 LOG2 antvel: Parameters to Doppler: Topocentric 81263 2010 1 0.0 2010-Jan-01 18:34:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:34:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2010-Jan-01 18:34:23 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2010-Jan-01 18:34:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:34:23 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:34:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Jan-01 18:34:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:34:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2010-Jan-01 18:34:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:34:23 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2010-Jan-01 18:34:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2010-Jan-01 18:34:23 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.887199 2010.0048566114026 18.999933 2010-Jan-01 18:34:23 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333325 30.191666666666670 2010-Jan-01 18:34:23 LOG4 log_alfabeam: ALFABEAM 1 1.231358237136193 30.088666006265679 2010-Jan-01 18:34:23 LOG4 log_alfabeam: ALFABEAM 2 1.238362654748077 30.125328171259646 2010-Jan-01 18:34:23 LOG4 log_alfabeam: ALFABEAM 3 1.240381151847272 30.228205452673315 2010-Jan-01 18:34:23 LOG4 log_alfabeam: ALFABEAM 4 1.235292028612650 30.294750226854585 2010-Jan-01 18:34:23 LOG4 log_alfabeam: ALFABEAM 5 1.228247178602098 30.257618629206156 2010-Jan-01 18:34:23 LOG4 log_alfabeam: ALFABEAM 6 1.226331987705251 30.154415965281025 2010-Jan-01 18:34:23 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32820 2010-Jan-01 18:34:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:34:24 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2010-Jan-01 18:34:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:34:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2010-Jan-01 18:34:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:34:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:34:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:34:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2010-Jan-01 18:34:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81265.00 2010-Jan-01 18:34:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:34:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:34:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:34:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:34:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:34:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:34:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:34:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:34:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:34:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:34:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:34:35 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2010-Jan-01 18:34:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:34:35 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2010-Jan-01 18:34:35 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2010-Jan-01 18:34:35 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-Jan-01 18:34:35 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2010-Jan-01 18:34:35 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:34:35 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00486 J 2010-Jan-01 18:34:35 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:34:35 LOG2 antvel: Parameters to Doppler: Topocentric 81275 2010 1 0.0 2010-Jan-01 18:34:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:34:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2010-Jan-01 18:34:35 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2010-Jan-01 18:34:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:34:35 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:34:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Jan-01 18:34:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:34:35 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2010-Jan-01 18:34:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:34:35 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2010-Jan-01 18:34:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2010-Jan-01 18:34:35 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.890541 2010.0048569916596 18.999933 2010-Jan-01 18:34:35 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333327 30.191666666666677 2010-Jan-01 18:34:35 LOG4 log_alfabeam: ALFABEAM 1 1.231385925832956 30.088577346080967 2010-Jan-01 18:34:35 LOG4 log_alfabeam: ALFABEAM 2 1.238380436068532 30.125555852049864 2010-Jan-01 18:34:35 LOG4 log_alfabeam: ALFABEAM 3 1.240371311973626 30.228523619512266 2010-Jan-01 18:34:35 LOG4 log_alfabeam: ALFABEAM 4 1.235264233021006 30.294838265602863 2010-Jan-01 18:34:35 LOG4 log_alfabeam: ALFABEAM 5 1.228229420664537 30.257387903082421 2010-Jan-01 18:34:35 LOG4 log_alfabeam: ALFABEAM 6 1.226342091132489 30.154099041513941 2010-Jan-01 18:34:35 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32821 2010-Jan-01 18:34:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:34:36 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2010-Jan-01 18:34:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:34:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2010-Jan-01 18:34:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:34:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:34:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:34:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2010-Jan-01 18:34:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81277.00 2010-Jan-01 18:34:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:34:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:34:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:34:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:34:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:34:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:34:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:34:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:34:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:34:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:34:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:34:47 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2010-Jan-01 18:34:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:34:47 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2010-Jan-01 18:34:47 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2010-Jan-01 18:34:47 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-Jan-01 18:34:47 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2010-Jan-01 18:34:47 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:34:47 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00486 J 2010-Jan-01 18:34:47 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:34:47 LOG2 antvel: Parameters to Doppler: Topocentric 81287 2010 1 0.0 2010-Jan-01 18:34:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:34:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2010-Jan-01 18:34:47 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2010-Jan-01 18:34:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:34:47 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:34:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Jan-01 18:34:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:34:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2010-Jan-01 18:34:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:34:47 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2010-Jan-01 18:34:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2010-Jan-01 18:34:47 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.893884 2010.0048573719166 18.999933 2010-Jan-01 18:34:47 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333319 30.191666666666674 2010-Jan-01 18:34:47 LOG4 log_alfabeam: ALFABEAM 1 1.231413716200739 30.088489693852466 2010-Jan-01 18:34:47 LOG4 log_alfabeam: ALFABEAM 2 1.238398206212796 30.125784979772405 2010-Jan-01 18:34:47 LOG4 log_alfabeam: ALFABEAM 3 1.240361358298630 30.228842236811960 2010-Jan-01 18:34:47 LOG4 log_alfabeam: ALFABEAM 4 1.235236335672924 30.294925287529615 2010-Jan-01 18:34:47 LOG4 log_alfabeam: ALFABEAM 5 1.228211675723846 30.257155723278863 2010-Jan-01 18:34:47 LOG4 log_alfabeam: ALFABEAM 6 1.226352308341869 30.153781692271970 2010-Jan-01 18:34:47 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32822 2010-Jan-01 18:34:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:34:48 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2010-Jan-01 18:34:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:34:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2010-Jan-01 18:34:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:34:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:34:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:34:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2010-Jan-01 18:34:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81289.00 2010-Jan-01 18:34:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:34:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:34:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:34:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:34:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:34:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:34:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:34:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:34:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:34:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:34:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:34:59 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2010-Jan-01 18:34:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:34:59 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2010-Jan-01 18:34:59 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2010-Jan-01 18:34:59 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-Jan-01 18:34:59 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2010-Jan-01 18:34:59 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:34:59 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00486 J 2010-Jan-01 18:34:59 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:34:59 LOG2 antvel: Parameters to Doppler: Topocentric 81299 2010 1 0.0 2010-Jan-01 18:34:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:34:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2010-Jan-01 18:34:59 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2010-Jan-01 18:34:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:34:59 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:34:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Jan-01 18:34:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:34:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2010-Jan-01 18:34:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:34:59 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-Jan-01 18:34:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2010-Jan-01 18:34:59 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.897226 2010.0048577521738 18.999933 2010-Jan-01 18:34:59 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333333 30.191666666666670 2010-Jan-01 18:34:59 LOG4 log_alfabeam: ALFABEAM 1 1.231441591159067 30.088403113471948 2010-Jan-01 18:34:59 LOG4 log_alfabeam: ALFABEAM 2 1.238415953683948 30.126015418220042 2010-Jan-01 18:34:59 LOG4 log_alfabeam: ALFABEAM 3 1.240351296353451 30.229161103318337 2010-Jan-01 18:34:59 LOG4 log_alfabeam: ALFABEAM 4 1.235208353720919 30.295011229100751 2010-Jan-01 18:34:59 LOG4 log_alfabeam: ALFABEAM 5 1.228193955274065 30.256922228018141 2010-Jan-01 18:34:59 LOG4 log_alfabeam: ALFABEAM 6 1.226362633623560 30.153464118145127 2010-Jan-01 18:34:59 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32823 2010-Jan-01 18:35:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:35:00 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2010-Jan-01 18:35:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:35:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2010-Jan-01 18:35:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:35:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:35:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:35:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2010-Jan-01 18:35:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81301.00 2010-Jan-01 18:35:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:35:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:35:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:35:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:35:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:35:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:35:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:35:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:35:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:35:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:35:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:35:11 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2010-Jan-01 18:35:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:35:11 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-Jan-01 18:35:11 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2010-Jan-01 18:35:11 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-Jan-01 18:35:11 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2010-Jan-01 18:35:11 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:35:11 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00486 J 2010-Jan-01 18:35:11 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:35:11 LOG2 antvel: Parameters to Doppler: Topocentric 81311 2010 1 0.0 2010-Jan-01 18:35:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:35:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2010-Jan-01 18:35:11 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2010-Jan-01 18:35:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:35:11 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:35:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Jan-01 18:35:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:35:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2010-Jan-01 18:35:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Jan-01 18:35:11 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2010-Jan-01 18:35:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2010-Jan-01 18:35:11 LOG5 log_alfabeam: Parameters: 1.2333333333333334 30.191666666666666 0.900569 2010.0048581324309 18.999933 2010-Jan-01 18:35:11 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333330 30.191666666666670 2010-Jan-01 18:35:11 LOG4 log_alfabeam: ALFABEAM 1 1.231469566921273 30.088317564577171 2010-Jan-01 18:35:11 LOG4 log_alfabeam: ALFABEAM 2 1.238433688230926 30.126247306035705 2010-Jan-01 18:35:11 LOG4 log_alfabeam: ALFABEAM 3 1.240341119700251 30.229480399084188 2010-Jan-01 18:35:11 LOG4 log_alfabeam: ALFABEAM 4 1.235180270895717 30.295096130278093 2010-Jan-01 18:35:11 LOG4 log_alfabeam: ALFABEAM 5 1.228176249594460 30.256687277020578 2010-Jan-01 18:35:11 LOG4 log_alfabeam: ALFABEAM 6 1.226373073551712 30.153146139945992 2010-Jan-01 18:35:11 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 32824 2010-Jan-01 18:35:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Jan-01 18:35:12 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2010-Jan-01 18:35:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:35:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2010-Jan-01 18:35:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:35:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:35:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:35:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2010-Jan-01 18:35:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81313.00 2010-Jan-01 18:35:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:35:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:35:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:35:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:35:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:35:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:35:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:35:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:35:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:35:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:35:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Jan-01 18:35:23 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2010-Jan-01 18:35:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Jan-01 18:35:23 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2010-Jan-01 18:35:23 INFO2 smartfreq: Switching off CAL 2010-Jan-01 18:35:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-01 18:35:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-01 18:35:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-01 18:35:23 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2010-Jan-01 18:35:23 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-01 18:35:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-01 18:35:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-01 18:35:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-01 18:35:23 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2010-Jan-01 18:35:23 INFO3 restore_frequencies: Restoring original frequencies 2010-Jan-01 18:35:23 LOG5 antvel: Calling 'antvel 11400.000000 301130.000000 J Topocentric 0' 2010-Jan-01 18:35:23 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00486 J 2010-Jan-01 18:35:23 LOG2 antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:35:23 LOG2 antvel: Parameters to Doppler: Topocentric 81323 2010 1 0.0 2010-Jan-01 18:35:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:35:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2010-Jan-01 18:35:23 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2010-Jan-01 18:35:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:35:23 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:35:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Jan-01 18:35:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:35:23 STOP finish_task: Finishing task 'smart frequency switching' 2010-Jan-01 18:35:23 LOG5 finish_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2010-Jan-01 18:35:23 DONE finish_task: DONE finished pattern: smart frequency switching 2010-Jan-01 18:35:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-01 18:35:23 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2010-Jan-01 18:35:23 LOG5 end_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2010-Jan-01 18:35:23 COMMAND run_command_line: EXECUTING command 27: 'LOAD ages_mock.conf' 2010-Jan-01 18:35:23 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Jan-01 18:35:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2010-Jan-01 18:35:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:35:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:35:24 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-01 18:35:24 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Jan-01 18:35:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:35:24 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2010-Jan-01 18:35:24 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2010-Jan-01 18:35:25 LOG2 CIMA-antvel: Precessing RA = 01:14:00.0 Dec = +30:11:30.0 Epoch = 2010.00486 J 2010-Jan-01 18:35:25 LOG2 CIMA-antvel: Computed apparent RA = 01:14:34.4 Dec = +30:14:56.2 2010-Jan-01 18:35:25 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 81323 2010 1 0.0 2010-Jan-01 18:35:25 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-Jan-01 18:35:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Jan-01 18:35:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Jan-01 18:35:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Jan-01 18:35:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Jan-01 18:35:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Jan-01 18:35:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2010-Jan-01 18:35:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Jan-01 18:35:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2010-Jan-01 18:35:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2010-Jan-01 18:35:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2010-Jan-01 18:35:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2010-Jan-01 18:35:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2010-Jan-01 18:35:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2010-Jan-01 18:35:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2010-Jan-01 18:35:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2010-Jan-01 18:35:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2010-Jan-01 18:35:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Jan-01 18:35:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Jan-01 18:35:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Jan-01 18:35:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Jan-01 18:35:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2010-Jan-01 18:35:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2010-Jan-01 18:35:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2010-Jan-01 18:35:28 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-01 18:35:28 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Jan-01 18:35:28 LOG5 begin_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2010-Jan-01 18:35:28 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Jan-01 18:35:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Jan-01 18:35:28 LOG1 config_iflo: Receiver ALFA already selected 2010-Jan-01 18:35:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-01 18:35:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-01 18:35:28 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-01 18:35:28 LOG5 begin_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2010-Jan-01 18:35:28 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-01 18:35:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-01 18:35:28 LOG5 end_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2010-Jan-01 18:35:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-01 18:35:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-01 18:35:28 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-Jan-01 18:35:28 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-Jan-01 18:35:28 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Jan-01 18:35:28 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Jan-01 18:35:28 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-Jan-01 18:35:28 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-Jan-01 18:35:28 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-Jan-01 18:35:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2010-Jan-01 18:35:28 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-Jan-01 18:35:28 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-Jan-01 18:35:28 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Jan-01 18:35:28 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Jan-01 18:35:28 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Jan-01 18:35:28 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Jan-01 18:35:28 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Jan-01 18:35:28 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-Jan-01 18:35:28 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-Jan-01 18:35:28 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-Jan-01 18:35:28 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-Jan-01 18:35:28 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Jan-01 18:35:28 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-Jan-01 18:35:28 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-Jan-01 18:35:28 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Jan-01 18:35:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:35:28 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-Jan-01 18:35:28 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-Jan-01 18:35:28 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Jan-01 18:35:28 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-Jan-01 18:35:28 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-Jan-01 18:35:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Jan-01 18:35:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:35:28 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Jan-01 18:35:28 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2010-Jan-01 18:35:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2010-Jan-01 18:35:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Jan-01 18:35:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:35:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:35:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:35:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:35:28 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-Jan-01 18:35:28 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Jan-01 18:35:28 LOG5 end_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2010-Jan-01 18:35:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Jan-01 18:35:28 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Jan-01 18:35:28 LOG5 finish_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2010-Jan-01 18:35:28 DONE finish_task: DONE finished configuration: IF/LO path 2010-Jan-01 18:35:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-01 18:35:28 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Jan-01 18:35:28 LOG5 end_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2010-Jan-01 18:35:28 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Jan-01 18:35:28 LOG5 begin_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2010-Jan-01 18:35:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Jan-01 18:35:28 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Jan-01 18:35:28 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Jan-01 18:35:28 START begin_task: Starting task 'selecting calibration port' 2010-Jan-01 18:35:28 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2010-Jan-01 18:35:28 LOG3 vw_send: To DATATAKING: calport 3 2010-Jan-01 18:35:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Jan-01 18:35:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:35:29 START begin_task: Starting task 'waiting on calport' 2010-Jan-01 18:35:29 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2010-Jan-01 18:35:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:35:29 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Jan-01 18:35:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:35:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:35:29 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-01 18:35:29 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Jan-01 18:35:29 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2010-Jan-01 18:35:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Jan-01 18:35:29 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Jan-01 18:35:29 LOG5 end_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2010-Jan-01 18:35:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-01 18:35:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-01 18:35:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-01 18:35:29 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-Jan-01 18:35:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:35:29 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-01 18:35:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-01 18:35:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-01 18:35:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-01 18:35:29 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-Jan-01 18:35:29 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Jan-01 18:35:29 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Jan-01 18:35:29 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Jan-01 18:35:29 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Jan-01 18:35:29 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Jan-01 18:35:29 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Jan-01 18:35:29 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Jan-01 18:35:29 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Jan-01 18:35:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2010-Jan-01 18:35:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2010-Jan-01 18:35:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2010-Jan-01 18:35:29 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2010-Jan-01 18:35:29 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Jan-01 18:35:29 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Jan-01 18:35:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-01 18:35:29 LOG5 begin_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2010-Jan-01 18:35:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Jan-01 18:35:29 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-01 18:35:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Jan-01 18:35:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-01 18:35:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2010-Jan-01 18:35:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-01 18:35:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-01 18:35:29 LOG5 end_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2010-Jan-01 18:35:29 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-Jan-01 18:35:29 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Jan-01 18:35:29 LOG5 finish_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2010-Jan-01 18:35:29 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Jan-01 18:35:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-01 18:35:29 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Jan-01 18:35:29 LOG5 end_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2010-Jan-01 18:35:29 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2010-Jan-01 18:35:29 LOG5 begin_task: Level: (2) ID = <10186> Status = 0 0 0 0 ok 2010-Jan-01 18:35:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2010-Jan-01 18:35:30 INFO1 config_mock: Starting to configure the Mock spectrometer 2010-Jan-01 18:35:30 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Jan-01 18:35:30 START begin_task: Starting task 'selecting calibration port' 2010-Jan-01 18:35:30 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2010-Jan-01 18:35:30 LOG3 vw_send: To DATATAKING: calport 3 2010-Jan-01 18:35:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Jan-01 18:35:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:35:30 START begin_task: Starting task 'waiting on calport' 2010-Jan-01 18:35:30 LOG5 begin_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2010-Jan-01 18:35:30 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Jan-01 18:35:30 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Jan-01 18:35:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:35:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:35:30 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-01 18:35:30 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Jan-01 18:35:30 LOG5 end_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2010-Jan-01 18:35:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Jan-01 18:35:30 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Jan-01 18:35:30 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2010-Jan-01 18:35:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-01 18:35:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-01 18:35:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-01 18:35:30 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2010-Jan-01 18:35:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:35:30 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-01 18:35:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-01 18:35:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-01 18:35:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-01 18:35:30 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2010-Jan-01 18:35:30 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Jan-01 18:35:30 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Jan-01 18:35:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-01 18:35:30 LOG5 begin_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2010-Jan-01 18:35:30 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-01 18:35:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-01 18:35:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-01 18:35:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-01 18:35:30 LOG5 end_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2010-Jan-01 18:35:30 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2010-Jan-01 18:35:30 LOG3 socket_wait: To MOCK: NOP 2010-Jan-01 18:35:30 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2010-Jan-01 18:35:30 LOG5 begin_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2010-Jan-01 18:35:31 ALERT got_mock_message: Mock spectrometer restarting 2010-Jan-01 18:35:31 LOG4 from_mock: From MOCK: nop ok 2010-Jan-01 18:35:31 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2010-Jan-01 18:35:31 LOG5 end_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2010-Jan-01 18:35:31 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2010-Jan-01 18:35:31 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2010-Jan-01 18:35:31 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2010-Jan-01 18:35:31 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2010-Jan-01 18:35:31 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2010-Jan-01 18:35:31 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2010-Jan-01 18:35:31 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2010-Jan-01 18:35:31 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2010-Jan-01 18:35:31 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2010-Jan-01 18:35:31 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2010-Jan-01 18:35:31 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2010-Jan-01 18:35:31 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2010-Jan-01 18:35:31 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2010-Jan-01 18:35:31 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2010-Jan-01 18:35:31 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2010-Jan-01 18:35:31 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2010-Jan-01 18:35:31 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2010-Jan-01 18:35:31 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2010-Jan-01 18:35:31 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2010-Jan-01 18:35:31 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2010-Jan-01 18:35:31 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2010-Jan-01 18:35:31 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2010-Jan-01 18:35:31 LOG5 begin_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2010-Jan-01 18:35:31 LOG4 from_mock: From MOCK: confok 2010-Jan-01 18:35:31 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2010-Jan-01 18:35:31 LOG5 end_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2010-Jan-01 18:35:32 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2010-Jan-01 18:35:32 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2010-Jan-01 18:35:32 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2010-Jan-01 18:35:32 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2010-Jan-01 18:35:32 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2010-Jan-01 18:35:32 LOG4 from_mock: From MOCK: confok 2010-Jan-01 18:35:32 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2010-Jan-01 18:35:32 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2010-Jan-01 18:35:32 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2010-Jan-01 18:35:32 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2010-Jan-01 18:35:32 LOG5 finish_task: Level: (2) ID = <10186> Status = 0 0 0 0 ok 2010-Jan-01 18:35:32 DONE finish_task: DONE finished configuring: the Mock spectrometer 2010-Jan-01 18:35:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Jan-01 18:35:32 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2010-Jan-01 18:35:32 LOG5 end_task: Level: (2) ID = <10186> Status = 0 0 0 0 ok 2010-Jan-01 18:35:32 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2010-Jan-01 18:35:32 COMMAND run_command_line: EXECUTING command 28: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2010-Jan-01 18:35:32 COMMAND run_command_line: EXECUTING command 29: 'CATALOG AGESFull.cat' 2010-Jan-01 18:35:32 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2010-Jan-01 18:35:32 COMMAND run_command_line: EXECUTING command 32: 'IF LSTSLEW(AGES33PP_p2_110) < 004834 THEN' 2010-Jan-01 18:35:33 LOG3 is_if_valid: Current source data: up 209.1 13.5 UP - - 100 0.4 2010-Jan-01 18:35:33 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES33PP_p2_110) < 004834 2010-Jan-01 18:35:33 INFO5 is_if_valid: Condition parsed as: 0.91280566666666674 < 0.80944444444444452 2010-Jan-01 18:35:33 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES33PP_p2_110) < 004834 THEN' 2010-Jan-01 18:35:33 COMMAND run_command_line: EXECUTING command 33: 'FIXEDDRIFT az=213.44 alfaangle=-13.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p2_110 ra=12400.00 dec=295630.00' 2010-Jan-01 18:35:33 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=213.44 alfaangle=-13.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p2_110 ra=12400.00 dec=295630.00' in non-true conditional branch 2010-Jan-01 18:35:33 COMMAND run_command_line: EXECUTING command 36: 'ENDIF' 2010-Jan-01 18:35:33 COMMAND run_command_line: EXECUTING command 39: 'IF LSTSLEW(AGES33PP_p2_112) < 011134 THEN' 2010-Jan-01 18:35:34 LOG3 is_if_valid: Current source data: up 209.2 13.5 UP - - 100 0.4 2010-Jan-01 18:35:34 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES33PP_p2_112) < 011134 2010-Jan-01 18:35:34 INFO5 is_if_valid: Condition parsed as: 0.91280566666666674 < 1.1927777777777777 2010-Jan-01 18:35:34 COMMAND run_command_line: EXECUTING command 40: 'FIXEDDRIFT az=193.71 alfaangle=6.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p2_112 ra=12400.00 dec=295330.00' 2010-Jan-01 18:35:34 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2010-Jan-01 18:35:34 WARNING check_obsmode: WARNING failed to get a response from the CIMA frontend when checking options for 'fixed azimuth drift map'! 2010-Jan-01 18:35:34 NOTE check_obsmode: Assuming that the options are OK 2010-Jan-01 18:35:34 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 193.71 6.2 hcorcal 5 tracking no off lcorcal first 1 AGES33PP_p2_112 12400.00 295330.00 J 8500.0 Heliocentric velocity(optical)' 2010-Jan-01 18:35:34 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-Jan-01 18:35:34 LOG5 begin_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2010-Jan-01 18:35:34 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'galfasrc' 2010-Jan-01 18:35:34 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-Jan-01 18:35:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES33PP_p2_112} 2010-Jan-01 18:35:34 INFO3 fixed_driftmap: Sending telescope to Az = 193.71 and ZA = 11.97 2010-Jan-01 18:35:34 LOG3 track_source: Calling 'track_source AGES33PP_p2_112 193.71 11.9656995309 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-Jan-01 18:35:34 START begin_task: Starting task 'sending tracking commands' 2010-Jan-01 18:35:34 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-Jan-01 18:35:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p2_112} INFO {Slewing to source 'AGES33PP_p2_112' ...} 2010-Jan-01 18:35:34 INFO1 track_source: Starting to track AGES33PP_p2_112 2010-Jan-01 18:35:34 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p2_112" 2010-Jan-01 18:35:34 LOG3 vw_send: To DATATAKING: set ra 193.71 2010-Jan-01 18:35:34 LOG3 vw_send: To DATATAKING: set dec 11.9656995309 2010-Jan-01 18:35:34 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-01 18:35:34 LOG3 vw_send: To DATATAKING: pnt tr 193.71 11.9656995309 -CF 2010-Jan-01 18:35:34 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-Jan-01 18:35:34 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-01 18:35:34 LOG5 finish_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-Jan-01 18:35:34 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-01 18:35:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-01 18:35:34 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-01 18:35:34 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-Jan-01 18:35:34 START begin_task: Starting task 'rotate ALFA to +6.2 degrees' 2010-Jan-01 18:35:34 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2010-Jan-01 18:35:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +6.2 degrees ...} 2010-Jan-01 18:35:34 INFO2 rotate_alfa: ALFA commanded to +6.2 degrees 2010-Jan-01 18:35:34 LOG3 sock_errsend: To ALFAMOTOR: POSITION 6.2 REPLY 2010-Jan-01 18:35:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Jan-01 18:35:34 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Jan-01 18:35:34 LOG5 begin_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2010-Jan-01 18:35:34 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p2_112" 2010-Jan-01 18:35:34 LOG4 got_cormsg: From DATATAKING: set ra 193.71 2010-Jan-01 18:35:34 LOG4 got_cormsg: From DATATAKING: set dec 11.9656995309 2010-Jan-01 18:35:34 LOG4 got_cormsg: From DATATAKING: vw% 193.71 2010-Jan-01 18:35:34 LOG4 got_cormsg: From DATATAKING: vw% 11.9656995309 2010-Jan-01 18:35:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:35:34 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-01 18:35:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:35:34 LOG4 got_cormsg: From DATATAKING: pnt tr 193.71 11.9656995309 -CF 2010-Jan-01 18:35:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:35:34 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-Jan-01 18:35:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:35:35 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Jan-01 18:35:42 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Jan-01 18:35:42 INFO3 alfa_motor: ALFA rotator in-position +6.20 degrees 2010-Jan-01 18:35:42 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Jan-01 18:35:42 LOG5 end_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2010-Jan-01 18:35:42 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-01 18:35:43 STOP finish_task: Finishing task 'rotate ALFA to +6.2 degrees' 2010-Jan-01 18:35:43 LOG5 finish_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2010-Jan-01 18:35:43 INFO2 finish_task: DONE finished configuration: rotating ALFA to +6.2 degrees 2010-Jan-01 18:35:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-01 18:35:43 STOP end_task: Finishing task 'rotate ALFA to +6.2 degrees' with status 'OK' 2010-Jan-01 18:35:43 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2010-Jan-01 18:35:43 START begin_task: Starting task 'waiting on telescope' 2010-Jan-01 18:35:43 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2010-Jan-01 18:35:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Jan-01 18:35:43 LOG3 waittrk: Start waittrk 5 2010-Jan-01 18:35:43 START begin_task: Starting task 'waiting on telescope movement' 2010-Jan-01 18:35:43 LOG5 begin_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2010-Jan-01 18:35:48 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Jan-01 18:35:48 LOG5 end_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2010-Jan-01 18:35:48 START begin_task: Starting task 'waiting on telescope on source' 2010-Jan-01 18:35:48 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2010-Jan-01 18:36:04 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Jan-01 18:36:04 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2010-Jan-01 18:36:04 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-01 18:36:04 INFO2 waittrk: Now tracking AGES33PP_p2_112 2010-Jan-01 18:36:04 LOG4 waittrk: Current telescope position: Az = 193.41 ZA = 12.00 2010-Jan-01 18:36:04 STOP finish_task: Finishing task 'waiting on telescope' 2010-Jan-01 18:36:04 LOG5 finish_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2010-Jan-01 18:36:04 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Jan-01 18:36:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-01 18:36:04 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Jan-01 18:36:04 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2010-Jan-01 18:36:04 START begin_task: Starting task 'selecting calibration type' 2010-Jan-01 18:36:04 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2010-Jan-01 18:36:04 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-01 18:36:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-01 18:36:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:36:04 START begin_task: Starting task 'waiting on setcal' 2010-Jan-01 18:36:04 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2010-Jan-01 18:36:04 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-01 18:36:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:36:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:36:04 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-01 18:36:04 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-01 18:36:04 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2010-Jan-01 18:36:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-01 18:36:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-01 18:36:04 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-01 18:36:04 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-01 18:36:04 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2010-Jan-01 18:36:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:36:04 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-01 18:36:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-01 18:36:04 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2010-Jan-01 18:36:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-01 18:36:04 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-01 18:36:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-01 18:36:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-01 18:36:04 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-01 18:36:04 LOG5 begin_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2010-Jan-01 18:36:05 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-01 18:36:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-01 18:36:05 LOG5 end_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2010-Jan-01 18:36:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-01 18:36:05 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-01 18:36:05 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-01 18:36:05 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2010-Jan-01 18:36:05 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2010-Jan-01 18:36:05 INFO2 astwait: Waiting for 936 seconds from 22:36:05 to 22:51:41 UTC ... 2010-Jan-01 18:36:05 LOG4 send_obs_status: To obs_status: <1> TASKTIME 936 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Jan-01 18:36:05 START begin_task: Starting task 'waiting on waiting for AST time' 2010-Jan-01 18:36:05 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2010-Jan-01 18:51:41 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2010-Jan-01 18:51:41 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2010-Jan-01 18:51:41 INFO3 astwait: Finished waiting 2010-Jan-01 18:51:41 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Jan-01 18:51:41 LOG5 dopset_later: Calling 'dopset_later 60.656702420819606' 2010-Jan-01 18:51:41 INFO3 dopset_later: Setting Doppler correction for 18:52:41 (60.7 seconds from now) 2010-Jan-01 18:51:41 LOG5 antvel: Calling 'antvel 193.710000 11.965700 F Heliocentric 60.656702420819606' 2010-Jan-01 18:51:41 LOG2 antvel: Transforming current Az = 193.71 ZA = 11.97 to apparent RA = 01:24:34.6 Dec = +29:56:53.0 2010-Jan-01 18:51:41 LOG2 antvel: Parameters to Doppler: Heliocentric 82361 2010 1 0.0 2010-Jan-01 18:51:41 INFO5 antvel: Computed antenna velocity: +26.87410 km/s 2010-Jan-01 18:51:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=26.874098628399999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2010-Jan-01 18:51:41 INFO4 dopset_gen: New sky frequencies: 1381.119622 1381.119622 1381.119622 1381.119622 1381.119622 1381.119622 1381.119622 1381.119622 1381.119622 2010-Jan-01 18:51:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.119622 sky0=1381.119622 sky1=1381.119622 sky2=1381.119622 sky3=1381.119622 sky4=1381.119622 sky5=1381.119622 sky6=1381.119622 sky7=1381.119622 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Jan-01 18:51:41 LOG2 dopset_gen: Result from 'sky2syn': 1631.119622 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Jan-01 18:51:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631119622.0} 2010-Jan-01 18:51:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:51:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2010-Jan-01 18:51:41 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2010-Jan-01 18:51:41 INFO5 fixed_driftmap: Tracking J2000 position: RA = 01:23:03.5 Dec = +29:53:45.6 2010-Jan-01 18:51:41 LOG3 track_source: Calling 'track_source AGES33PP_p2_112 012303.5 295345.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-Jan-01 18:51:41 START begin_task: Starting task 'sending tracking commands' 2010-Jan-01 18:51:41 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2010-Jan-01 18:51:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p2_112} INFO {Slewing to source 'AGES33PP_p2_112' ...} 2010-Jan-01 18:51:41 INFO1 track_source: Starting to track AGES33PP_p2_112 2010-Jan-01 18:51:41 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p2_112" 2010-Jan-01 18:51:41 LOG3 vw_send: To DATATAKING: set ra 012303.5 2010-Jan-01 18:51:41 LOG3 vw_send: To DATATAKING: set dec 295345.6 2010-Jan-01 18:51:41 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Jan-01 18:51:41 LOG3 vw_send: To DATATAKING: pnt tr 012303.5 295345.6 -CJ 2010-Jan-01 18:51:41 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2010-Jan-01 18:51:41 STOP finish_task: Finishing task 'sending tracking commands' 2010-Jan-01 18:51:41 LOG5 finish_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2010-Jan-01 18:51:41 INFO2 finish_task: DONE finished sending: tracking commands 2010-Jan-01 18:51:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-01 18:51:41 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Jan-01 18:51:41 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2010-Jan-01 18:51:41 START begin_task: Starting task 'waiting on telescope' 2010-Jan-01 18:51:41 LOG5 begin_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2010-Jan-01 18:51:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Jan-01 18:51:41 LOG3 waittrk: Start waittrk 5 2010-Jan-01 18:51:41 START begin_task: Starting task 'waiting on telescope movement' 2010-Jan-01 18:51:41 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2010-Jan-01 18:51:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631119622.0} 2010-Jan-01 18:51:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Jan-01 18:51:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:51:41 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p2_112" 2010-Jan-01 18:51:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:51:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:51:41 LOG4 got_cormsg: From DATATAKING: set ra 012303.5 2010-Jan-01 18:51:41 LOG4 got_cormsg: From DATATAKING: set dec 295345.6 2010-Jan-01 18:51:41 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Jan-01 18:51:41 LOG4 got_cormsg: From DATATAKING: pnt tr 012303.5 295345.6 -CJ 2010-Jan-01 18:51:41 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2010-Jan-01 18:51:41 LOG4 got_cormsg: From DATATAKING: 012303.5 2010-Jan-01 18:51:41 LOG4 got_cormsg: From DATATAKING: vw% 295345.6 2010-Jan-01 18:51:41 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2010-Jan-01 18:51:46 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Jan-01 18:51:46 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2010-Jan-01 18:51:46 START begin_task: Starting task 'waiting on telescope on source' 2010-Jan-01 18:51:46 LOG5 begin_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2010-Jan-01 18:51:48 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Jan-01 18:51:48 LOG5 end_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2010-Jan-01 18:51:48 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Jan-01 18:51:48 INFO2 waittrk: Now tracking AGES33PP_p2_112 2010-Jan-01 18:51:48 LOG4 waittrk: Current telescope position: Az = 193.32 ZA = 12.00 2010-Jan-01 18:51:48 STOP finish_task: Finishing task 'waiting on telescope' 2010-Jan-01 18:51:48 LOG5 finish_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2010-Jan-01 18:51:48 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Jan-01 18:51:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-01 18:51:48 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Jan-01 18:51:48 LOG5 end_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2010-Jan-01 18:51:48 START begin_task: Starting task 'adjusting WAPP+Mock power' 2010-Jan-01 18:51:48 LOG5 begin_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2010-Jan-01 18:51:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2010-Jan-01 18:51:48 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2010-Jan-01 18:51:48 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Jan-01 18:51:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Jan-01 18:51:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:51:49 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Jan-01 18:51:49 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2010-Jan-01 18:51:49 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Jan-01 18:51:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:51:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:51:52 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-01 18:51:52 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Jan-01 18:51:52 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2010-Jan-01 18:51:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Jan-01 18:51:52 START begin_task: Starting task 'adjusting WAPP power' 2010-Jan-01 18:51:52 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2010-Jan-01 18:51:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Jan-01 18:51:52 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-01 18:51:52 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-01 18:51:52 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-01 18:51:52 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Jan-01 18:51:52 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Jan-01 18:51:52 LOG5 begin_task: Level: (5) ID = <10213> Status = 0 0 0 0 ok 2010-Jan-01 18:51:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Jan-01 18:51:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:51:52 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-Jan-01 18:51:52 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 4 dB 2010-Jan-01 18:51:52 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 1 3 dB --- beam 3: 4 3 dB 2010-Jan-01 18:51:52 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 1 dB 2010-Jan-01 18:51:52 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Jan-01 18:51:52 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Jan-01 18:51:52 LOG5 end_task: Level: (5) ID = <10213> Status = 0 0 0 0 ok 2010-Jan-01 18:51:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.004 0.939 ALFA beam 1: 1.078 1.069 2010-Jan-01 18:51:53 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.029 0.931 ALFA beam 3: 0.930 1.024 2010-Jan-01 18:51:53 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.947 0.993 ALFA beam 5: 1.024 1.033 2010-Jan-01 18:51:53 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.964 1.124 ALFA beam 7: 1.066 1.099 2010-Jan-01 18:51:53 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Jan-01 18:51:53 LOG5 finish_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2010-Jan-01 18:51:53 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Jan-01 18:51:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-01 18:51:53 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Jan-01 18:51:53 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2010-Jan-01 18:51:53 START begin_task: Starting task 'adjusting Mock spectrometer power' 2010-Jan-01 18:51:53 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2010-Jan-01 18:51:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Jan-01 18:51:53 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2010-Jan-01 18:51:53 LOG3 socket_wait: To MOCK: ADJP30 2010-Jan-01 18:51:53 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2010-Jan-01 18:51:53 LOG5 begin_task: Level: (5) ID = <10215> Status = 0 0 0 0 ok 2010-Jan-01 18:51:58 INFO3 from_mock: From MOCK: b0s0g0 rms:A 30.5 27.0 B 28.8 28.7 mn:A 1.0 0.6 B 0.3 -0.3 gn: 9 10 2010-Jan-01 18:51:59 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.7 30.3 B 30.6 32.4 mn:A 0.5 -0.2 B 0.1 -0.2 gn: 10 11 2010-Jan-01 18:51:59 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.8 29.9 B 32.9 29.7 mn:A -0.2 0.4 B 0.0 1.4 gn: 9 10 2010-Jan-01 18:51:59 INFO3 from_mock: From MOCK: b1s1g0 rms:A 34.1 31.3 B 29.9 29.9 mn:A -0.0 0.4 B -0.7 -0.0 gn: 10 9 2010-Jan-01 18:51:59 INFO3 from_mock: From MOCK: b2s0g0 rms:A 30.5 29.6 B 28.3 29.4 mn:A 0.1 -0.1 B -0.1 0.1 gn: 14 12 2010-Jan-01 18:51:59 INFO3 from_mock: From MOCK: b2s1g0 rms:A 28.9 29.3 B 32.5 30.2 mn:A 0.0 -0.5 B 0.0 0.1 gn: 15 13 2010-Jan-01 18:51:59 INFO3 from_mock: From MOCK: b3s0g0 rms:A 30.1 30.1 B 33.2 29.6 mn:A 0.5 -0.2 B 0.2 -0.3 gn: 11 12 2010-Jan-01 18:51:59 INFO3 from_mock: From MOCK: b3s1g0 rms:A 32.2 31.4 B 28.8 29.9 mn:A 0.1 -0.2 B -0.5 -0.1 gn: 11 11 2010-Jan-01 18:51:59 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.8 28.9 B 31.3 31.5 mn:A 0.4 -0.4 B 0.1 0.4 gn: 10 14 2010-Jan-01 18:51:59 INFO3 from_mock: From MOCK: b4s1g0 rms:A 33.2 30.0 B 31.0 29.4 mn:A -0.1 -0.4 B 0.6 -0.1 gn: 12 17 2010-Jan-01 18:51:59 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.6 29.2 B 31.5 31.4 mn:A 0.1 -0.1 B -0.2 -0.2 gn: 10 11 2010-Jan-01 18:51:59 INFO3 from_mock: From MOCK: b5s1g0 rms:A 30.7 30.0 B 30.1 30.2 mn:A 0.1 -0.0 B 0.3 0.7 gn: 10 10 2010-Jan-01 18:51:59 INFO3 from_mock: From MOCK: b6s0g0 rms:A 30.9 28.2 B 29.4 29.8 mn:A -0.4 0.1 B -0.4 0.5 gn: 12 15 2010-Jan-01 18:51:59 INFO3 from_mock: From MOCK: b6s1g0 rms:A 31.1 28.4 B 29.2 28.7 mn:A -0.4 0.2 B 0.2 -0.3 gn: 13 16 2010-Jan-01 18:51:59 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2010-Jan-01 18:51:59 LOG5 end_task: Level: (5) ID = <10215> Status = 0 0 0 0 ok 2010-Jan-01 18:51:59 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2010-Jan-01 18:51:59 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2010-Jan-01 18:51:59 LOG5 finish_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2010-Jan-01 18:51:59 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2010-Jan-01 18:51:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-01 18:51:59 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2010-Jan-01 18:51:59 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2010-Jan-01 18:51:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-01 18:51:59 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2010-Jan-01 18:51:59 LOG5 finish_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2010-Jan-01 18:51:59 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2010-Jan-01 18:51:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-01 18:51:59 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2010-Jan-01 18:51:59 LOG5 end_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2010-Jan-01 18:51:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2010-Jan-01 18:51:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2010-Jan-01 18:51:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2010-Jan-01 18:51:59 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2010-Jan-01 18:51:59 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2010-Jan-01 18:51:59 START begin_task: Starting task 'WAPP+Mock calibration' 2010-Jan-01 18:51:59 LOG5 begin_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2010-Jan-01 18:51:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2010-Jan-01 18:51:59 START begin_task: Starting task 'selecting calibration type' 2010-Jan-01 18:51:59 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2010-Jan-01 18:51:59 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Jan-01 18:51:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Jan-01 18:51:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:51:59 START begin_task: Starting task 'waiting on setcal' 2010-Jan-01 18:51:59 LOG5 begin_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2010-Jan-01 18:51:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2010-Jan-01 18:51:59 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Jan-01 18:51:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Jan-01 18:51:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:51:59 LOG4 got_cormsg: From DATATAKING: DONE 2010-Jan-01 18:51:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Jan-01 18:51:59 LOG5 end_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2010-Jan-01 18:51:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Jan-01 18:51:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-01 18:51:59 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Jan-01 18:51:59 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-01 18:51:59 LOG5 begin_task: Level: (5) ID = <10219> Status = 0 0 0 0 ok 2010-Jan-01 18:51:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Jan-01 18:51:59 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-01 18:51:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-01 18:51:59 LOG5 end_task: Level: (5) ID = <10219> Status = 0 0 0 0 ok 2010-Jan-01 18:51:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-01 18:51:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Jan-01 18:51:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Jan-01 18:51:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Jan-01 18:51:59 START begin_task: Starting task 'waiting on command to ALFA' 2010-Jan-01 18:51:59 LOG5 begin_task: Level: (5) ID = <10220> Status = 0 0 0 0 ok 2010-Jan-01 18:52:00 LOG4 got_alfamon: From ALFAMON: ACK 2010-Jan-01 18:52:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Jan-01 18:52:00 LOG5 end_task: Level: (5) ID = <10220> Status = 0 0 0 0 ok 2010-Jan-01 18:52:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Jan-01 18:52:00 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Jan-01 18:52:00 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Jan-01 18:52:00 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2010-Jan-01 18:52:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Jan-01 18:52:00 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Jan-01 18:52:00 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Jan-01 18:52:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-01 18:52:00 LOG5 begin_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2010-Jan-01 18:52:00 NOTE WAPPDATA-new_file: New FITS file: wapp.20100101.a2048.0002.fits 2010-Jan-01 18:52:00 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-01 18:52:00 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100101.a2048.0002.fits} 2010-Jan-01 18:52:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Jan-01 18:52:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-01 18:52:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-01 18:52:00 LOG5 end_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2010-Jan-01 18:52:00 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Jan-01 18:52:00 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-Jan-01 18:52:00 LOG5 begin_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2010-Jan-01 18:52:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Jan-01 18:52:00 LOG5 log_alfabeam: Parameters: 1.3843055555555555 29.895999999999994 1.181335 2010.0048900740233 6.199958 2010-Jan-01 18:52:00 LOG4 log_alfabeam: ALFABEAM 0 1.384305555555538 29.896000000000001 2010-Jan-01 18:52:00 LOG4 log_alfabeam: ALFABEAM 1 1.385117007282287 29.792253435069792 2010-Jan-01 18:52:00 LOG4 log_alfabeam: ALFABEAM 2 1.390823335959133 29.861415242824314 2010-Jan-01 18:52:00 LOG4 log_alfabeam: ALFABEAM 3 1.390033362135120 29.965283547033000 2010-Jan-01 18:52:00 LOG4 log_alfabeam: ALFABEAM 4 1.383446014725860 29.999787797319186 2010-Jan-01 18:52:00 LOG4 log_alfabeam: ALFABEAM 5 1.377757135098176 29.929897680701323 2010-Jan-01 18:52:00 LOG4 log_alfabeam: ALFABEAM 6 1.378637996680508 29.826234132827452 2010-Jan-01 18:52:00 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-Jan-01 18:52:00 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-Jan-01 18:52:00 LOG3 take_mock_data: PSET configuration: obsnm=ss 2010-Jan-01 18:52:00 LOG3 take_mock_data: PSET configuration: object=AGES33PP_p2_112 2010-Jan-01 18:52:00 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-Jan-01 18:52:00 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-Jan-01 18:52:00 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-Jan-01 18:52:00 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-Jan-01 18:52:00 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-Jan-01 18:52:00 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-Jan-01 18:52:00 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2010-Jan-01 18:52:00 LOG3 take_mock_data: PSET configuration: scantype=ON 2010-Jan-01 18:52:00 LOG3 take_mock_data: PSET configuration: patternid=32811 2010-Jan-01 18:52:00 LOG3 take_mock_data: PSET configuration: scanid=32825 2010-Jan-01 18:52:00 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-Jan-01 18:52:00 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-Jan-01 18:52:00 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-Jan-01 18:52:00 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456119622.0 2010-Jan-01 18:52:00 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306119622.0 2010-Jan-01 18:52:00 LOG3 take_mock_data: PSET configuration: filetype=1 2010-Jan-01 18:52:00 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-Jan-01 18:52:00 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ss:object=AGES33PP_p2_112:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=32811:scanid=32825:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456119622.0:topobfreqhz=1306119622.0:filetype=1 2010-Jan-01 18:52:00 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-Jan-01 18:52:00 LOG5 begin_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2010-Jan-01 18:52:00 LOG4 from_mock: From MOCK: psetok 2010-Jan-01 18:52:00 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-Jan-01 18:52:00 LOG5 end_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2010-Jan-01 18:52:00 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-Jan-01 18:52:00 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-Jan-01 18:52:00 LOG3 socket_wait: To MOCK: STAR5 2010-Jan-01 18:52:00 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-Jan-01 18:52:00 LOG5 begin_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2010-Jan-01 18:52:00 LOG4 from_mock: From MOCK: starok 2010-Jan-01 18:52:00 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-Jan-01 18:52:00 LOG5 end_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2010-Jan-01 18:52:00 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-Jan-01 18:52:00 INFO2 take_data: Starting WAPP+Mock 5-second scan: 32825 2010-Jan-01 18:52:01 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-Jan-01 18:52:01 LOG5 begin_task: Level: (5) ID = <10225> Status = 0 0 0 0 ok 2010-Jan-01 18:52:01 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-Jan-01 18:52:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:52:01 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-Jan-01 18:52:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Jan-01 18:52:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82322.00 2010-Jan-01 18:52:02 INFO2 got_mock_message: Mock spectrometer start file number is 00000 2010-Jan-01 18:52:02 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-Jan-01 18:52:02 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2010-Jan-01 18:52:02 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2010-Jan-01 18:52:02 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-Jan-01 18:52:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-Jan-01 18:52:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-Jan-01 18:52:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-Jan-01 18:52:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-Jan-01 18:52:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-Jan-01 18:52:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-Jan-01 18:52:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-Jan-01 18:52:02 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-Jan-01 18:52:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2010-Jan-01 18:52:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2010-Jan-01 18:52:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2010-Jan-01 18:52:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2010-Jan-01 18:52:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2010-Jan-01 18:52:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2010-Jan-01 18:52:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2010-Jan-01 18:52:05 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 18:52:05.02 2010-Jan-01 18:52:05 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1262386325.02 Fri Jan 1 18:52:05 2010 2010-Jan-01 18:52:05 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-Jan-01 18:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.119622 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.119622 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.119622 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.119622 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.119622 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.119622 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.119622 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.119622 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.119622 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:52:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:52:11 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-Jan-01 18:52:11 INFO1 got_mock_message: From MOCK: DONE with observation 2010-Jan-01 18:52:11 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-Jan-01 18:52:11 LOG5 end_task: Level: (5) ID = <10225> Status = 0 0 0 0 ok 2010-Jan-01 18:52:11 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-Jan-01 18:52:11 LOG5 end_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2010-Jan-01 18:52:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Jan-01 18:52:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Jan-01 18:52:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Jan-01 18:52:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Jan-01 18:52:11 LOG5 begin_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2010-Jan-01 18:52:11 LOG3 CALCONTROL-caltrig: Software trigger 2010-Jan-01 18:52:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Jan-01 18:52:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Jan-01 18:52:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Jan-01 18:52:11 LOG5 end_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2010-Jan-01 18:52:11 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2010-Jan-01 18:52:11 START begin_task: Starting task 'WAPP+Mock spectral observation' 2010-Jan-01 18:52:11 LOG5 begin_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2010-Jan-01 18:52:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2010-Jan-01 18:52:11 LOG5 log_alfabeam: Parameters: 1.3843055555555555 29.895999999999994 1.184399 2010.0048904225923 6.199958 2010-Jan-01 18:52:11 LOG4 log_alfabeam: ALFABEAM 0 1.384305555555560 29.895999999999990 2010-Jan-01 18:52:11 LOG4 log_alfabeam: ALFABEAM 1 1.385145505261380 29.792291882083209 2010-Jan-01 18:52:11 LOG4 log_alfabeam: ALFABEAM 2 1.390832807769291 29.861718535654248 2010-Jan-01 18:52:11 LOG4 log_alfabeam: ALFABEAM 3 1.390014274516212 29.965549489351435 2010-Jan-01 18:52:11 LOG4 log_alfabeam: ALFABEAM 4 1.383417406339922 29.999747145553428 2010-Jan-01 18:52:11 LOG4 log_alfabeam: ALFABEAM 5 1.377747843562561 29.929592431860534 2010-Jan-01 18:52:11 LOG4 log_alfabeam: ALFABEAM 6 1.378657250477303 29.825970628410751 2010-Jan-01 18:52:11 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2010-Jan-01 18:52:11 LOG3 take_mock_data: PSET configuration: projid=a2048 2010-Jan-01 18:52:11 LOG3 take_mock_data: PSET configuration: obsnm=ss 2010-Jan-01 18:52:11 LOG3 take_mock_data: PSET configuration: object=AGES33PP_p2_112 2010-Jan-01 18:52:11 LOG3 take_mock_data: PSET configuration: frontend=alfa 2010-Jan-01 18:52:11 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2010-Jan-01 18:52:11 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2010-Jan-01 18:52:11 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2010-Jan-01 18:52:11 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2010-Jan-01 18:52:11 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2010-Jan-01 18:52:11 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2010-Jan-01 18:52:11 LOG3 take_mock_data: PSET configuration: scantype=OFF 2010-Jan-01 18:52:11 LOG3 take_mock_data: PSET configuration: patternid=32811 2010-Jan-01 18:52:11 LOG3 take_mock_data: PSET configuration: scanid=32826 2010-Jan-01 18:52:11 LOG3 take_mock_data: PSET configuration: prfeed=0 2010-Jan-01 18:52:11 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2010-Jan-01 18:52:11 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2010-Jan-01 18:52:11 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456119622.0 2010-Jan-01 18:52:11 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306119622.0 2010-Jan-01 18:52:11 LOG3 take_mock_data: PSET configuration: filetype=1 2010-Jan-01 18:52:11 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2010-Jan-01 18:52:11 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=ss:object=AGES33PP_p2_112:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=32811:scanid=32826:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456119622.0:topobfreqhz=1306119622.0:filetype=1 2010-Jan-01 18:52:11 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2010-Jan-01 18:52:11 LOG5 begin_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2010-Jan-01 18:52:11 LOG4 from_mock: From MOCK: psetok 2010-Jan-01 18:52:11 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2010-Jan-01 18:52:11 LOG5 end_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2010-Jan-01 18:52:11 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2010-Jan-01 18:52:11 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2010-Jan-01 18:52:11 LOG3 socket_wait: To MOCK: STAR5 2010-Jan-01 18:52:11 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2010-Jan-01 18:52:11 LOG5 begin_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2010-Jan-01 18:52:11 LOG4 from_mock: From MOCK: starok 2010-Jan-01 18:52:11 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2010-Jan-01 18:52:11 LOG5 end_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2010-Jan-01 18:52:11 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2010-Jan-01 18:52:11 INFO2 take_data: Starting WAPP+Mock 5-second scan: 32826 2010-Jan-01 18:52:11 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2010-Jan-01 18:52:11 LOG5 begin_task: Level: (5) ID = <10230> Status = 0 0 0 0 ok 2010-Jan-01 18:52:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Jan-01 18:52:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2010-Jan-01 18:52:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82332.00 2010-Jan-01 18:52:12 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2010-Jan-01 18:52:12 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2010-Jan-01 18:52:13 INFO2 got_mock_message: Mock spectrometer start file number is 00100 2010-Jan-01 18:52:13 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2010-Jan-01 18:52:13 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2010-Jan-01 18:52:13 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2010-Jan-01 18:52:13 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2010-Jan-01 18:52:14 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2010-Jan-01 18:52:14 LOG3 from_mock: From MOCK: infook pnetg0: pdev-104 0.13 MB/s 2010-Jan-01 18:52:14 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2010-Jan-01 18:52:14 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2010-Jan-01 18:52:14 LOG3 from_mock: From MOCK: infook pnetg0: pdev-113 0.13 MB/s 2010-Jan-01 18:52:14 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2010-Jan-01 18:52:14 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2010-Jan-01 18:52:14 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2010-Jan-01 18:52:14 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1 0.13 MB/s, 0.00 GB 2010-Jan-01 18:52:14 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2 0.13 MB/s, 0.00 GB 2010-Jan-01 18:52:14 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3 0.13 MB/s, 0.00 GB 2010-Jan-01 18:52:14 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4 0.13 MB/s, 0.00 GB 2010-Jan-01 18:52:14 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5 0.13 MB/s, 0.00 GB 2010-Jan-01 18:52:14 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6 0.13 MB/s, 0.00 GB 2010-Jan-01 18:52:14 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7 0.13 MB/s, 0.00 GB 2010-Jan-01 18:52:17 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 18:52:17.01 2010-Jan-01 18:52:17 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1262386337.01 Fri Jan 1 18:52:17 2010 2010-Jan-01 18:52:17 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2010-Jan-01 18:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.119622 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Jan-01 18:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.119622 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.119622 MHz Flip = 1 Band = 0 Mixer = 997.770669 MHz 2010-Jan-01 18:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.119622 MHz Flip = 1 Band = 0 Mixer = 944.607124 MHz 2010-Jan-01 18:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.119622 MHz Flip = 1 Band = 0 Mixer = 942.650192 MHz 2010-Jan-01 18:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.119622 MHz Flip = 1 Band = 0 Mixer = 1550.000000 MHz 2010-Jan-01 18:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.119622 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2010-Jan-01 18:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.119622 MHz Flip = 1 Band = 0 Mixer = 1850.000000 MHz 2010-Jan-01 18:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.119622 MHz Flip = 1 Band = 0 Mixer = 1825.405752 MHz 2010-Jan-01 18:52:17 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2010-Jan-01 18:52:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Jan-01 18:52:23 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2010-Jan-01 18:52:23 INFO1 got_mock_message: From MOCK: DONE with observation 2010-Jan-01 18:52:23 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2010-Jan-01 18:52:23 LOG5 end_task: Level: (5) ID = <10230> Status = 0 0 0 0 ok 2010-Jan-01 18:52:23 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2010-Jan-01 18:52:23 LOG5 end_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2010-Jan-01 18:52:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Jan-01 18:52:23 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2010-Jan-01 18:52:23 LOG5 finish_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2010-Jan-01 18:52:23 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2010-Jan-01 18:52:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Jan-01 18:52:23 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2010-Jan-01 18:52:23 LOG5 end_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2010-Jan-01 18:52:23 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2010-Jan-01 18:52:23 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 193.71 and ZA = 11.97 2010-Jan-01 18:52:23 LOG3 track_source: Calling 'track_source AGES33PP_p2_112 193.71 11.9656995309 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2010-Jan-01 18:52:23 START begin_task: Starting task 'sending tracking commands' 2010-Jan-01 18:52:23 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2010-Jan-01 18:52:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p2_112} INFO {Slewing to source 'AGES33PP_p2_112' ...} 2010-Jan-01 18:52