2009-Jul-30 01:31:42 BEGIN executive: CIMA executive starting ... 2009-Jul-30 01:31:43 NOTE executive: STARTING NEW CIMA SESSION 2009-Jul-30 01:31:43 INFO1 executive: Using CIMA version 3.0.11 'normal' from 2009-05-18 10:00 2009-Jul-30 01:31:43 INFO4 executive: This is an ON-LINE session 2009-Jul-30 01:31:43 INFO4 executive: This is a LOCAL session 2009-Jul-30 01:31:43 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Jul-30 01:31:43 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'R Minchin' 2009-Jul-30 01:31:43 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20090730' 2009-Jul-30 01:31:43 LOG2 log_preferences: Currently applied preferences: 2009-Jul-30 01:31:43 LOG2 log_preferences: prefs(dailylog) = daily 2009-Jul-30 01:31:43 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Jul-30 01:31:43 LOG2 log_preferences: prefs(datawindow) = ignore 2009-Jul-30 01:31:43 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Jul-30 01:31:43 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Jul-30 01:31:43 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Jul-30 01:31:43 LOG2 log_preferences: prefs(logcolours) = full 2009-Jul-30 01:31:43 LOG2 log_preferences: prefs(displaylevel) = INFO3 2009-Jul-30 01:31:43 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Jul-30 01:31:43 LOG2 log_preferences: prefs(displayformat) = short 2009-Jul-30 01:31:43 LOG2 log_preferences: prefs(logformat) = new 2009-Jul-30 01:31:43 LOG2 log_preferences: prefs(fontsize) = 4 2009-Jul-30 01:31:43 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Jul-30 01:31:43 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2009-Jul-30 01:31:43 ALERT executive: CIMA executive ready 2009-Jul-30 01:31:44 NOTE frontend: CIMA frontend ready 2009-Jul-30 01:31:46 LOG4 got_cormsg: From DATATAKING: vw% setup 2009-Jul-30 01:31:51 INFO1 CIMA-find_last_tsys: Last Tsys-values for 'L-Band Wide' is from 2009-Jul-29 14:59:49 for 'hcorcal': 30.0 K & 28.4 K 2009-Jul-30 01:31:51 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Jul-30 01:31:51 LOG4 exec_msg: From OBSERVER: select_receiver lbw no no yes 2009-Jul-30 01:31:51 LOG1 select_receiver: Calling 'select_receiver lbw no no yes' 2009-Jul-30 01:31:51 BEGIN begin_task: Starting task 'selecting receiver L-Band Wide' 2009-Jul-30 01:31:51 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Jul-30 01:31:51 NOTE select_receiver: Starting to select receiver L-Band Wide 2009-Jul-30 01:31:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver L-Band Wide ...} 2009-Jul-30 01:31:51 LOG3 vw_send: To DATATAKING: setupall 5 1400.0 2009-Jul-30 01:31:51 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Jul-30 01:31:51 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Jul-30 01:31:51 STOP finish_task: Finishing task 'selecting receiver L-Band Wide' 2009-Jul-30 01:31:51 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Jul-30 01:31:51 DONE finish_task: DONE finished selecting: receiver L-Band Wide 2009-Jul-30 01:31:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 01:31:51 END end_task: Finishing task 'selecting receiver L-Band Wide' with status 'OK' 2009-Jul-30 01:31:51 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Jul-30 01:31:52 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2009-Jul-30 01:31:52 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2009-Jul-30 01:31:52 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Jul-30 01:31:52 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Jul-30 01:31:52 LOG4 got_cormsg: From DATATAKING: 2009-Jul-30 01:31:52 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2009-Jul-30 01:31:52 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Jul-30 01:31:52 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Jul-30 01:31:52 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Jul-30 01:31:52 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Jul-30 01:31:53 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Jul-30 01:31:53 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Jul-30 01:31:53 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Jul-30 01:31:53 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Jul-30 01:31:53 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Jul-30 01:31:53 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Jul-30 01:31:53 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Jul-30 01:31:53 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2009-Jul-30 01:31:53 LOG4 got_cormsg: From DATATAKING: setupall 5 1400.0 2009-Jul-30 01:31:53 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Jul-30 01:31:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:31:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:01 NOTE CIMA-load_config_file: Loading and applying configuration file 'ages_lbw.conf' 2009-Jul-30 01:32:01 INFO1 CIMA-find_last_tsys: Last Tsys-values for 'L-Band Wide' is from 2009-Jul-29 14:59:49 for 'hcorcal': 30.0 K & 28.4 K 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "lbw" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "10GHz to 1500" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "275" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "275" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "275" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "275" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "1775.000000" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "1775.000000" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "1775.000000" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "1775.000000" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "1775.000000" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "1775.000000" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "1775.000000" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "1775.000000" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "lbwpol lin" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "lbfb 7" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "F" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "5" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "7 5" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "4" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "11420.405752" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Jul-30 01:32:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Jul-30 01:32:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "0" 2009-Jul-30 01:32:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "0" 2009-Jul-30 01:32:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "F" 2009-Jul-30 01:32:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "0" 2009-Jul-30 01:32:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Jul-30 01:32:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Jul-30 01:32:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Jul-30 01:32:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "1500" 2009-Jul-30 01:32:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "1500 1500 1500 1500 1500 1500 1500 1500" 2009-Jul-30 01:32:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "750" 2009-Jul-30 01:32:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Jul-30 01:32:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Jul-30 01:32:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "F" 2009-Jul-30 01:32:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Jul-30 01:32:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "5" 2009-Jul-30 01:32:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Jul-30 01:32:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Jul-30 01:32:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Jul-30 01:32:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "50" 2009-Jul-30 01:32:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "50" 2009-Jul-30 01:32:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "25" 2009-Jul-30 01:32:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "25" 2009-Jul-30 01:32:03 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Jul-30 01:32:03 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Jul-30 01:32:03 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Jul-30 01:32:03 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Jul-30 01:32:03 INFO1 config_iflo: Starting to configure IF/LO path for L-Band Wide 2009-Jul-30 01:32:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Jul-30 01:32:03 INFO1 config_iflo: Selecting receiver L-Band Wide 2009-Jul-30 01:32:03 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver L-Band Wide} 2009-Jul-30 01:32:03 LOG1 select_receiver: Calling 'select_receiver lbw no no yes' 2009-Jul-30 01:32:03 START begin_task: Starting task 'selecting receiver L-Band Wide' 2009-Jul-30 01:32:03 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2009-Jul-30 01:32:03 NOTE select_receiver: Starting to select receiver L-Band Wide 2009-Jul-30 01:32:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver L-Band Wide ...} 2009-Jul-30 01:32:03 LOG3 vw_send: To DATATAKING: setupall 5 1400.0 2009-Jul-30 01:32:03 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Jul-30 01:32:03 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Jul-30 01:32:03 STOP finish_task: Finishing task 'selecting receiver L-Band Wide' 2009-Jul-30 01:32:03 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2009-Jul-30 01:32:03 INFO2 finish_task: DONE finished selecting: receiver L-Band Wide 2009-Jul-30 01:32:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 01:32:03 STOP end_task: Finishing task 'selecting receiver L-Band Wide' with status 'OK' 2009-Jul-30 01:32:03 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2009-Jul-30 01:32:03 START begin_task: Starting task 'waiting for receiver L-Band Wide' 2009-Jul-30 01:32:03 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Jul-30 01:32:03 STOP end_task: Finishing task 'waiting for receiver L-Band Wide' with status 'OK' 2009-Jul-30 01:32:03 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Jul-30 01:32:03 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Jul-30 01:32:03 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Jul-30 01:32:03 LOG3 vw_send: To DATATAKING: lbwpol lin 2009-Jul-30 01:32:03 LOG3 vw_send: To DATATAKING: lbfb 7 2009-Jul-30 01:32:03 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Jul-30 01:32:03 LOG3 vw_send: To DATATAKING: if1 {if1_shcl F} 2009-Jul-30 01:32:03 LOG3 vw_send: To DATATAKING: if1 {if1_rfnum 5} 2009-Jul-30 01:32:03 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Jul-30 01:32:04 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 7 5} 2009-Jul-30 01:32:04 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 4} 2009-Jul-30 01:32:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11420405752.0} 2009-Jul-30 01:32:04 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Jul-30 01:32:04 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Jul-30 01:32:04 LOG3 vw_send: To DATATAKING: if1 {if1_ac2sw 0} 2009-Jul-30 01:32:04 LOG3 vw_send: To DATATAKING: if1 {if1_phbsig 0} 2009-Jul-30 01:32:04 LOG3 vw_send: To DATATAKING: if1 {if1_hybrid F} 2009-Jul-30 01:32:04 LOG3 vw_send: To DATATAKING: if1 {if1_phblo 0} 2009-Jul-30 01:32:04 LOG3 vw_send: To DATATAKING: if1 {if1_750nb F} 2009-Jul-30 01:32:04 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Jul-30 01:32:04 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 5} 2009-Jul-30 01:32:04 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Jul-30 01:32:04 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Jul-30 01:32:04 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Jul-30 01:32:04 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq 1500} 2009-Jul-30 01:32:04 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 1500 1500 1500 1500 1500 1500 1500 1500} 2009-Jul-30 01:32:04 LOG3 vw_send: To DATATAKING: if2 {if2_vlbainp 750} 2009-Jul-30 01:32:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2009-Jul-30 01:32:04 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Jul-30 01:32:04 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Jul-30 01:32:04 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Jul-30 01:32:04 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Jul-30 01:32:04 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Jul-30 01:32:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Jul-30 01:32:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 01:32:04 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Jul-30 01:32:04 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: setupall 5 1400.0 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: lbwpol lin 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: lbfb 7 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_shcl F} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfnum 5} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 7 5} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 4} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11420405752.0} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_ac2sw 0} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_phbsig 0} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_hybrid F} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_phblo 0} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_750nb F} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 5} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq 1500} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 1500 1500 1500 1500 1500 1500 1500 1500} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_vlbainp 750} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Jul-30 01:32:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 01:32:07 LOG4 got_cormsg: From DATATAKING: settinng up if2 2009-Jul-30 01:32:07 LOG4 got_cormsg: From DATATAKING: setting up if1lo 2009-Jul-30 01:32:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:21 LOG4 got_cormsg: From DATATAKING: settinng up if2 2009-Jul-30 01:32:21 LOG4 got_cormsg: From DATATAKING: setting up if1lo 2009-Jul-30 01:32:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:36 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-30 01:32:36 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Jul-30 01:32:36 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2009-Jul-30 01:32:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Jul-30 01:32:36 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Jul-30 01:32:36 LOG5 finish_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Jul-30 01:32:36 DONE finish_task: DONE finished configuration: IF/LO path 2009-Jul-30 01:32:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 01:32:36 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Jul-30 01:32:36 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Jul-30 01:32:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Jul-30 01:32:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Jul-30 01:32:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Jul-30 01:32:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Jul-30 01:32:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "1 chan, 9-level, pol a" 2009-Jul-30 01:32:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "1 chan, 9-level, pol b" 2009-Jul-30 01:32:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "1 chan, 9-level, pol a" 2009-Jul-30 01:32:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "1 chan, 9-level, pol b" 2009-Jul-30 01:32:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "50" 2009-Jul-30 01:32:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "50" 2009-Jul-30 01:32:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "25" 2009-Jul-30 01:32:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "25" 2009-Jul-30 01:32:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Jul-30 01:32:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "0" 2009-Jul-30 01:32:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "0" 2009-Jul-30 01:32:36 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Jul-30 01:32:36 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Jul-30 01:32:36 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Jul-30 01:32:36 LOG5 begin_task: Level: (1) ID = <10006> Status = 0 0 0 0 ok 2009-Jul-30 01:32:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Jul-30 01:32:36 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Jul-30 01:32:36 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Jul-30 01:32:36 START begin_task: Starting task 'selecting calibration port' 2009-Jul-30 01:32:36 LOG5 begin_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2009-Jul-30 01:32:36 LOG3 vw_send: To DATATAKING: calport 3 2009-Jul-30 01:32:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Jul-30 01:32:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 01:32:36 START begin_task: Starting task 'waiting on calport' 2009-Jul-30 01:32:36 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Jul-30 01:32:36 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Jul-30 01:32:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 01:32:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:37 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-30 01:32:37 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Jul-30 01:32:37 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Jul-30 01:32:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Jul-30 01:32:37 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Jul-30 01:32:37 LOG5 end_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2009-Jul-30 01:32:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jul-30 01:32:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jul-30 01:32:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-30 01:32:37 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Jul-30 01:32:37 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-30 01:32:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:32:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-30 01:32:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-30 01:32:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-30 01:32:37 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Jul-30 01:32:37 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Jul-30 01:32:37 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Jul-30 01:32:37 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Jul-30 01:32:37 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Jul-30 01:32:37 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Jul-30 01:32:37 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Jul-30 01:32:37 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Jul-30 01:32:37 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Jul-30 01:32:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2009-Jul-30 01:32:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2009-Jul-30 01:32:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2009-Jul-30 01:32:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2009-Jul-30 01:32:37 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Jul-30 01:32:37 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Jul-30 01:32:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-30 01:32:37 LOG5 begin_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2009-Jul-30 01:32:37 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-30 01:32:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-30 01:32:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-30 01:32:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-30 01:32:37 LOG5 end_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2009-Jul-30 01:32:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2009-Jul-30 01:32:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2009-Jul-30 01:32:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2009-Jul-30 01:32:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2009-Jul-30 01:32:37 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Jul-30 01:32:37 LOG5 finish_task: Level: (1) ID = <10006> Status = 0 0 0 0 ok 2009-Jul-30 01:32:37 DONE finish_task: DONE finished configuring: the WAPPs in single board mode 2009-Jul-30 01:32:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 01:32:37 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Jul-30 01:32:37 LOG5 end_task: Level: (1) ID = <10006> Status = 0 0 0 0 ok 2009-Jul-30 01:32:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Jul-30 01:32:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Jul-30 01:32:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Jul-30 01:32:37 NOTE CIMA-load_config_file: Configuration file 'ages_lbw.conf' applied. 2009-Jul-30 01:32:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Jul-30 01:32:38 NOTE WAPPDATA-new_file: New FITS file: wapp.20090730.a2048.0000.fits 2009-Jul-30 01:32:38 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090730.a2048.0000.fits} 2009-Jul-30 01:33:32 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Jul-30 01:33:32 LOG4 exec_msg: From OBSERVER: track_new_source J230054+161059 230054 161059 J 0 0 main small /share/obs4/usr/a2048/n7332fu2.cat 2050.0 Heliocentric velocity(optical) 0 0 0.0 0.0 0 2009-Jul-30 01:33:32 LOG1 track_new_source: Calling 'track_new_source J230054+161059 230054 161059 J 0 0 main small /share/obs4/usr/a2048/n7332fu2.cat 2050.0 Heliocentric velocity(optical) 0 0 0.0 0.0 0' 2009-Jul-30 01:33:32 BEGIN begin_task: Starting task 'selecting new source' 2009-Jul-30 01:33:32 LOG5 begin_task: Level: (1) ID = <10011> Status = 0 0 0 0 ok 2009-Jul-30 01:33:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {J230054+161059} INFO {Selecting source 'J230054+161059' ...} 2009-Jul-30 01:33:33 LOG3 track_source: Calling 'track_source J230054+161059 230054 161059 J 0 0 main small /share/obs4/usr/a2048/n7332fu2.cat 2050.0 Heliocentric velocity(optical)' 2009-Jul-30 01:33:33 START begin_task: Starting task 'sending tracking commands' 2009-Jul-30 01:33:33 LOG5 begin_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2009-Jul-30 01:33:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {J230054+161059} INFO {Slewing to source 'J230054+161059' ...} 2009-Jul-30 01:33:33 INFO1 track_source: Starting to track J230054+161059 2009-Jul-30 01:33:33 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J230054+161059" 2009-Jul-30 01:33:33 LOG3 vw_send: To DATATAKING: set ra 230054 2009-Jul-30 01:33:33 LOG3 vw_send: To DATATAKING: set dec 161059 2009-Jul-30 01:33:33 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-30 01:33:33 LOG3 vw_send: To DATATAKING: pnt tr 230054 161059 -CJ 2009-Jul-30 01:33:33 LOG3 vw_send: To DATATAKING: dopsetvel 2050.0 hel 2009-Jul-30 01:33:33 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-30 01:33:33 LOG5 finish_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2009-Jul-30 01:33:33 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jul-30 01:33:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 01:33:33 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jul-30 01:33:33 LOG5 end_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2009-Jul-30 01:33:33 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2009-Jul-30 01:33:33 START begin_task: Starting task 'applying pointing corrections' 2009-Jul-30 01:33:33 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2009-Jul-30 01:33:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Jul-30 01:33:33 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Jul-30 01:33:33 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Jul-30 01:33:33 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2009-Jul-30 01:33:33 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Jul-30 01:33:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 01:33:33 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Jul-30 01:33:33 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2009-Jul-30 01:33:33 STOP finish_task: Finishing task 'selecting new source' 2009-Jul-30 01:33:33 LOG5 finish_task: Level: (1) ID = <10011> Status = 0 0 0 0 ok 2009-Jul-30 01:33:33 DONE finish_task: DONE finished selecting: new source 2009-Jul-30 01:33:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 01:33:33 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Jul-30 01:33:33 LOG5 end_task: Level: (1) ID = <10011> Status = 0 0 0 0 ok 2009-Jul-30 01:33:33 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J230054+161059" 2009-Jul-30 01:33:33 LOG4 got_cormsg: From DATATAKING: set ra 230054 2009-Jul-30 01:33:33 LOG4 got_cormsg: From DATATAKING: set dec 161059 2009-Jul-30 01:33:33 LOG4 got_cormsg: From DATATAKING: vw% 230054 2009-Jul-30 01:33:33 LOG4 got_cormsg: From DATATAKING: vw% 161059 2009-Jul-30 01:33:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:33:33 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-30 01:33:33 LOG4 got_cormsg: From DATATAKING: pnt tr 230054 161059 -CJ 2009-Jul-30 01:33:33 LOG4 got_cormsg: From DATATAKING: dopsetvel 2050.0 hel 2009-Jul-30 01:33:33 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jul-30 01:33:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:33:33 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Jul-30 01:33:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:33:44 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.13) to the zenith angle limit 19.69 degrees! 2009-Jul-30 01:33:44 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 459.5523 19.1274 RA/Dec = 23:00:54 +16:10:59 2009-Jul-30 01:33:57 INFO4 CIMA-antvel: Computed apparent RA = 23:01:24.4 Dec = +16:14:10.9 from RA = 23:00:54.0 Dec = +16:10:59.0 Epoch = 2009.57787 J 2009-Jul-30 01:33:57 INFO4 CIMA-antvel: Parameters to Doppler: Heliocentric 20037.0 2009 211 0 2009-Jul-30 01:33:57 INFO3 CIMA-antvel: Computed velocity correction -19.7310812775 2009-Jul-30 01:33:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Jul-30 01:33:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Jul-30 01:33:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "lbw" 2009-Jul-30 01:33:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "750" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "275" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "275" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "275" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "275" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "1025.000000" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "1025.000000" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "1025.000000" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "1025.000000" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "1025.000000" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "1025.000000" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "1025.000000" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "1025.000000" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "lbwpol lin" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "lbfb 1 3" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "F" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "5" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "7 5" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "2" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "2160.851749" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "0" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "750" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "750" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Jul-30 01:33:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Jul-30 01:33:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "F" 2009-Jul-30 01:33:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Jul-30 01:33:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "5" 2009-Jul-30 01:33:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Jul-30 01:33:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Jul-30 01:33:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Jul-30 01:33:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "50" 2009-Jul-30 01:33:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "50" 2009-Jul-30 01:33:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "25" 2009-Jul-30 01:33:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "25" 2009-Jul-30 01:33:59 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Jul-30 01:33:59 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Jul-30 01:33:59 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Jul-30 01:33:59 LOG5 begin_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2009-Jul-30 01:33:59 INFO1 config_iflo: Starting to configure IF/LO path for L-Band Wide 2009-Jul-30 01:33:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Jul-30 01:33:59 LOG1 config_iflo: Receiver L-Band Wide already selected 2009-Jul-30 01:33:59 LOG3 config_iflo: Skipping polarizer command 'lbwpol lin' since system already is properly set 2009-Jul-30 01:33:59 LOG3 vw_send: To DATATAKING: lbfb 1 3 2009-Jul-30 01:33:59 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Jul-30 01:33:59 LOG3 send_ifx: Skipping if1-command 'if1_shcl F' since system already is properly set 2009-Jul-30 01:33:59 LOG3 send_ifx: Skipping if1-command 'if1_rfnum 5' since system already is properly set 2009-Jul-30 01:33:59 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Jul-30 01:33:59 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 7 5' since system already is properly set 2009-Jul-30 01:33:59 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 2} 2009-Jul-30 01:33:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 2160851749.0} 2009-Jul-30 01:33:59 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Jul-30 01:33:59 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Jul-30 01:33:59 LOG3 send_ifx: Skipping if1-command 'if1_ac2sw 0' since system already is properly set 2009-Jul-30 01:33:59 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Jul-30 01:33:59 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Jul-30 01:33:59 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Jul-30 01:33:59 LOG3 send_ifx: Skipping if1-command 'if1_750nb F' since system already is properly set 2009-Jul-30 01:33:59 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Jul-30 01:33:59 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 5' since system already is properly set 2009-Jul-30 01:33:59 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Jul-30 01:33:59 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Jul-30 01:33:59 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2009-Jul-30 01:33:59 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq 750} 2009-Jul-30 01:33:59 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Jul-30 01:33:59 LOG3 send_ifx: Skipping if2-command 'if2_vlbainp 750' since system already is properly set 2009-Jul-30 01:33:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1025000000.0 1025000000.0 1025000000.0 1025000000.0 1025000000.0 1025000000.0 1025000000.0 1025000000.0} 2009-Jul-30 01:33:59 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Jul-30 01:33:59 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Jul-30 01:33:59 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Jul-30 01:33:59 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Jul-30 01:33:59 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Jul-30 01:33:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Jul-30 01:33:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 01:33:59 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Jul-30 01:33:59 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2009-Jul-30 01:33:59 LOG4 got_cormsg: From DATATAKING: lbfb 1 3 2009-Jul-30 01:33:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 2} 2009-Jul-30 01:33:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 2160851749.0} 2009-Jul-30 01:33:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq 750} 2009-Jul-30 01:33:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Jul-30 01:33:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1025000000.0 1025000000.0 1025000000.0 1025000000.0 1025000000.0 1025000000.0 1025000000.0 1025000000.0} 2009-Jul-30 01:33:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 01:33:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:34:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:34:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:34:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:34:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:34:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:34:03 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-30 01:34:03 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Jul-30 01:34:03 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2009-Jul-30 01:34:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Jul-30 01:34:03 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Jul-30 01:34:03 LOG5 finish_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2009-Jul-30 01:34:03 DONE finish_task: DONE finished configuration: IF/LO path 2009-Jul-30 01:34:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 01:34:03 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Jul-30 01:34:03 LOG5 end_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2009-Jul-30 01:34:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:34:08 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Jul-30 01:34:08 LOG4 exec_msg: From OBSERVER: track_new_source J230054+161059 230054 161059 J 0 0 main small /share/obs4/usr/a2048/n7332fu2.cat 2050.0 Heliocentric velocity(optical) 0 0 0.0 0.0 0 2009-Jul-30 01:34:08 LOG1 track_new_source: Calling 'track_new_source J230054+161059 230054 161059 J 0 0 main small /share/obs4/usr/a2048/n7332fu2.cat 2050.0 Heliocentric velocity(optical) 0 0 0.0 0.0 0' 2009-Jul-30 01:34:08 BEGIN begin_task: Starting task 'selecting new source' 2009-Jul-30 01:34:08 LOG5 begin_task: Level: (1) ID = <10016> Status = 0 0 0 0 ok 2009-Jul-30 01:34:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {J230054+161059} INFO {Selecting source 'J230054+161059' ...} 2009-Jul-30 01:34:08 LOG3 track_source: Calling 'track_source J230054+161059 230054 161059 J 0 0 main small /share/obs4/usr/a2048/n7332fu2.cat 2050.0 Heliocentric velocity(optical)' 2009-Jul-30 01:34:08 START begin_task: Starting task 'sending tracking commands' 2009-Jul-30 01:34:08 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2009-Jul-30 01:34:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {J230054+161059} INFO {Slewing to source 'J230054+161059' ...} 2009-Jul-30 01:34:08 INFO1 track_source: Starting to track J230054+161059 2009-Jul-30 01:34:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J230054+161059" 2009-Jul-30 01:34:08 LOG3 vw_send: To DATATAKING: set ra 230054 2009-Jul-30 01:34:08 LOG3 vw_send: To DATATAKING: set dec 161059 2009-Jul-30 01:34:08 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-30 01:34:08 LOG3 vw_send: To DATATAKING: pnt tr 230054 161059 -CJ 2009-Jul-30 01:34:08 LOG3 vw_send: To DATATAKING: dopsetvel 2050.0 hel 2009-Jul-30 01:34:08 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-30 01:34:08 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2009-Jul-30 01:34:08 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jul-30 01:34:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 01:34:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jul-30 01:34:08 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2009-Jul-30 01:34:08 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2009-Jul-30 01:34:08 START begin_task: Starting task 'applying pointing corrections' 2009-Jul-30 01:34:08 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Jul-30 01:34:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Jul-30 01:34:08 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Jul-30 01:34:08 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Jul-30 01:34:08 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Jul-30 01:34:08 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Jul-30 01:34:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 01:34:08 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Jul-30 01:34:08 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Jul-30 01:34:08 STOP finish_task: Finishing task 'selecting new source' 2009-Jul-30 01:34:08 LOG5 finish_task: Level: (1) ID = <10016> Status = 0 0 0 0 ok 2009-Jul-30 01:34:08 DONE finish_task: DONE finished selecting: new source 2009-Jul-30 01:34:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 01:34:08 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Jul-30 01:34:08 LOG5 end_task: Level: (1) ID = <10016> Status = 0 0 0 0 ok 2009-Jul-30 01:34:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J230054+161059" 2009-Jul-30 01:34:08 LOG4 got_cormsg: From DATATAKING: set ra 230054 2009-Jul-30 01:34:08 LOG4 got_cormsg: From DATATAKING: set dec 161059 2009-Jul-30 01:34:08 LOG4 got_cormsg: From DATATAKING: vw% 230054 2009-Jul-30 01:34:08 LOG4 got_cormsg: From DATATAKING: vw% 161059 2009-Jul-30 01:34:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:34:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-30 01:34:08 LOG4 got_cormsg: From DATATAKING: pnt tr 230054 161059 -CJ 2009-Jul-30 01:34:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 2050.0 hel 2009-Jul-30 01:34:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jul-30 01:34:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:34:08 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Jul-30 01:34:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:34:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Jul-30 01:34:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Jul-30 01:34:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Jul-30 01:34:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Jul-30 01:34:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "1 chan, 9-level, pol a" 2009-Jul-30 01:34:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "1 chan, 9-level, pol b" 2009-Jul-30 01:34:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "1 chan, 9-level, pol a" 2009-Jul-30 01:34:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "1 chan, 9-level, pol b" 2009-Jul-30 01:34:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "50" 2009-Jul-30 01:34:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "50" 2009-Jul-30 01:34:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "25" 2009-Jul-30 01:34:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "25" 2009-Jul-30 01:34:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Jul-30 01:34:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "0" 2009-Jul-30 01:34:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "0" 2009-Jul-30 01:34:17 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Jul-30 01:34:17 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Jul-30 01:34:17 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Jul-30 01:34:17 LOG5 begin_task: Level: (1) ID = <10019> Status = 0 0 0 0 ok 2009-Jul-30 01:34:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Jul-30 01:34:17 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Jul-30 01:34:17 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Jul-30 01:34:17 START begin_task: Starting task 'selecting calibration port' 2009-Jul-30 01:34:17 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2009-Jul-30 01:34:17 LOG3 vw_send: To DATATAKING: calport 3 2009-Jul-30 01:34:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Jul-30 01:34:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 01:34:17 START begin_task: Starting task 'waiting on calport' 2009-Jul-30 01:34:17 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2009-Jul-30 01:34:17 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Jul-30 01:34:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 01:34:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:34:17 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-30 01:34:17 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Jul-30 01:34:17 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2009-Jul-30 01:34:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Jul-30 01:34:17 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Jul-30 01:34:17 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2009-Jul-30 01:34:17 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jul-30 01:34:17 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jul-30 01:34:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-30 01:34:17 LOG5 begin_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2009-Jul-30 01:34:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:34:17 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-30 01:34:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-30 01:34:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-30 01:34:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-30 01:34:17 LOG5 end_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2009-Jul-30 01:34:17 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Jul-30 01:34:17 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Jul-30 01:34:17 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Jul-30 01:34:17 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Jul-30 01:34:17 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Jul-30 01:34:17 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Jul-30 01:34:17 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Jul-30 01:34:17 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Jul-30 01:34:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2009-Jul-30 01:34:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2009-Jul-30 01:34:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2009-Jul-30 01:34:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2009-Jul-30 01:34:17 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Jul-30 01:34:17 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Jul-30 01:34:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-30 01:34:18 LOG5 begin_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2009-Jul-30 01:34:18 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-30 01:34:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-30 01:34:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-30 01:34:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-30 01:34:18 LOG5 end_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2009-Jul-30 01:34:18 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Jul-30 01:34:18 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Jul-30 01:34:18 LOG5 finish_task: Level: (1) ID = <10019> Status = 0 0 0 0 ok 2009-Jul-30 01:34:18 DONE finish_task: DONE finished configuring: the WAPPs in single board mode 2009-Jul-30 01:34:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 01:34:18 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Jul-30 01:34:18 LOG5 end_task: Level: (1) ID = <10019> Status = 0 0 0 0 ok 2009-Jul-30 01:34:18 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Jul-30 01:34:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Jul-30 01:34:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Jul-30 01:34:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Jul-30 01:35:14 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 19.49) to the zenith angle limit 19.69 degrees! 2009-Jul-30 01:35:14 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 497.1042 19.4885 RA/Dec = 23:00:54 +16:10:59 2009-Jul-30 01:35:34 INFO1 CIMA-change_telescope_wrap: Selecting new azimuth range: 0-360 degrees (wrap = 1) 2009-Jul-30 01:35:34 COMMAND CIMA-send_to_exec: Sending command to set new azimuth range 2009-Jul-30 01:35:35 LOG4 exec_msg: From OBSERVER: vw_send {pnt wrap 1} 2009-Jul-30 01:35:35 LOG3 vw_send: To DATATAKING: pnt wrap 1 2009-Jul-30 01:35:35 LOG4 got_cormsg: From DATATAKING: pnt wrap 1 2009-Jul-30 01:35:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:35:36 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Jul-30 01:35:36 LOG4 exec_msg: From OBSERVER: track_new_source J230054+161059 230054 161059 J 0 0 main small /share/obs4/usr/a2048/n7332fu2.cat 2050.0 Heliocentric velocity(optical) 0 0 0.0 0.0 0 2009-Jul-30 01:35:36 LOG1 track_new_source: Calling 'track_new_source J230054+161059 230054 161059 J 0 0 main small /share/obs4/usr/a2048/n7332fu2.cat 2050.0 Heliocentric velocity(optical) 0 0 0.0 0.0 0' 2009-Jul-30 01:35:36 BEGIN begin_task: Starting task 'selecting new source' 2009-Jul-30 01:35:36 LOG5 begin_task: Level: (1) ID = <10024> Status = 0 0 0 0 ok 2009-Jul-30 01:35:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {J230054+161059} INFO {Selecting source 'J230054+161059' ...} 2009-Jul-30 01:35:36 LOG3 track_source: Calling 'track_source J230054+161059 230054 161059 J 0 0 main small /share/obs4/usr/a2048/n7332fu2.cat 2050.0 Heliocentric velocity(optical)' 2009-Jul-30 01:35:36 START begin_task: Starting task 'sending tracking commands' 2009-Jul-30 01:35:36 LOG5 begin_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2009-Jul-30 01:35:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {J230054+161059} INFO {Slewing to source 'J230054+161059' ...} 2009-Jul-30 01:35:36 INFO1 track_source: Starting to track J230054+161059 2009-Jul-30 01:35:36 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J230054+161059" 2009-Jul-30 01:35:36 LOG3 vw_send: To DATATAKING: set ra 230054 2009-Jul-30 01:35:36 LOG3 vw_send: To DATATAKING: set dec 161059 2009-Jul-30 01:35:37 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-30 01:35:37 LOG3 vw_send: To DATATAKING: pnt tr 230054 161059 -CJ 2009-Jul-30 01:35:37 LOG3 vw_send: To DATATAKING: dopsetvel 2050.0 hel 2009-Jul-30 01:35:37 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-30 01:35:37 LOG5 finish_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2009-Jul-30 01:35:37 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jul-30 01:35:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 01:35:37 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jul-30 01:35:37 LOG5 end_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2009-Jul-30 01:35:37 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2009-Jul-30 01:35:37 START begin_task: Starting task 'applying pointing corrections' 2009-Jul-30 01:35:37 LOG5 begin_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2009-Jul-30 01:35:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Jul-30 01:35:37 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Jul-30 01:35:37 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Jul-30 01:35:37 LOG5 finish_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2009-Jul-30 01:35:37 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Jul-30 01:35:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 01:35:37 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Jul-30 01:35:37 LOG5 end_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2009-Jul-30 01:35:37 STOP finish_task: Finishing task 'selecting new source' 2009-Jul-30 01:35:37 LOG5 finish_task: Level: (1) ID = <10024> Status = 0 0 0 0 ok 2009-Jul-30 01:35:37 DONE finish_task: DONE finished selecting: new source 2009-Jul-30 01:35:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 01:35:37 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Jul-30 01:35:37 LOG5 end_task: Level: (1) ID = <10024> Status = 0 0 0 0 ok 2009-Jul-30 01:35:37 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J230054+161059" 2009-Jul-30 01:35:37 LOG4 got_cormsg: From DATATAKING: set ra 230054 2009-Jul-30 01:35:37 LOG4 got_cormsg: From DATATAKING: set dec 161059 2009-Jul-30 01:35:37 LOG4 got_cormsg: From DATATAKING: vw% 230054 2009-Jul-30 01:35:37 LOG4 got_cormsg: From DATATAKING: vw% 161059 2009-Jul-30 01:35:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:35:37 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-30 01:35:37 LOG4 got_cormsg: From DATATAKING: pnt tr 230054 161059 -CJ 2009-Jul-30 01:35:37 LOG4 got_cormsg: From DATATAKING: dopsetvel 2050.0 hel 2009-Jul-30 01:35:37 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jul-30 01:35:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:35:37 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Jul-30 01:35:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:35:44 WARNING CIMA-warn_on_position: WARNING the telescope is close (Az = 508.9) to the azimuth limit 360 degrees! 2009-Jul-30 01:35:44 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 508.8890 19.3692 RA/Dec = 23:00:54 +16:10:59 2009-Jul-30 01:36:14 WARNING CIMA-warn_on_position: WARNING the telescope is close (Az = 497.7) to the azimuth limit 360 degrees! 2009-Jul-30 01:36:14 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 497.6932 19.2502 RA/Dec = 23:00:54 +16:10:59 2009-Jul-30 01:36:44 WARNING CIMA-warn_on_position: WARNING the telescope is close (Az = 485.2) to the azimuth limit 360 degrees! 2009-Jul-30 01:36:44 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 485.1881 19.1310 RA/Dec = 23:00:54 +16:10:59 2009-Jul-30 01:37:14 WARNING CIMA-warn_on_position: WARNING the telescope is close (Az = 472.7) to the azimuth limit 360 degrees! 2009-Jul-30 01:37:14 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 472.6879 19.0119 RA/Dec = 23:00:54 +16:10:59 2009-Jul-30 01:37:44 WARNING CIMA-warn_on_position: WARNING the telescope is close (Az = 460.2) to the azimuth limit 360 degrees! 2009-Jul-30 01:37:44 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 460.1879 18.8927 RA/Dec = 23:00:54 +16:10:59 2009-Jul-30 01:38:14 WARNING CIMA-warn_on_position: WARNING the telescope is close (Az = 447.7) to the azimuth limit 360 degrees! 2009-Jul-30 01:38:14 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 447.6873 18.7737 RA/Dec = 23:00:54 +16:10:59 2009-Jul-30 01:38:44 WARNING CIMA-warn_on_position: WARNING the telescope is close (Az = 435.2) to the azimuth limit 360 degrees! 2009-Jul-30 01:38:44 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 435.1872 18.6544 RA/Dec = 23:00:54 +16:10:59 2009-Jul-30 01:39:14 WARNING CIMA-warn_on_position: WARNING the telescope is close (Az = 422.7) to the azimuth limit 360 degrees! 2009-Jul-30 01:39:14 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 422.6867 18.5352 RA/Dec = 23:00:54 +16:10:59 2009-Jul-30 01:39:44 WARNING CIMA-warn_on_position: WARNING the telescope is close (Az = 410.2) to the azimuth limit 360 degrees! 2009-Jul-30 01:39:44 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 410.1847 18.4160 RA/Dec = 23:00:54 +16:10:59 2009-Jul-30 01:40:14 WARNING CIMA-warn_on_position: WARNING the telescope is close (Az = 397.7) to the azimuth limit 360 degrees! 2009-Jul-30 01:40:14 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 397.6842 18.2967 RA/Dec = 23:00:54 +16:10:59 2009-Jul-30 01:40:38 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2009-Jul-30 01:40:38 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 each first 0 2009-Jul-30 01:40:38 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 each first 0' 2009-Jul-30 01:40:38 BEGIN begin_task: Starting task 'standard on/off' 2009-Jul-30 01:40:38 LOG5 begin_task: Level: (1) ID = <10027> Status = 0 0 0 0 ok 2009-Jul-30 01:40:38 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'J230054+161059' 2009-Jul-30 01:40:38 INFO1 onoff_wapp: Starting pattern: Standard on/off 2009-Jul-30 01:40:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2009-Jul-30 01:40:38 START begin_task: Starting task 'waiting on telescope' 2009-Jul-30 01:40:38 LOG5 begin_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2009-Jul-30 01:40:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jul-30 01:40:38 LOG3 waittrk: Start waittrk 5 2009-Jul-30 01:40:38 START begin_task: Starting task 'waiting on telescope movement' 2009-Jul-30 01:40:38 LOG5 begin_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2009-Jul-30 01:40:43 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jul-30 01:40:43 LOG5 end_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2009-Jul-30 01:40:43 START begin_task: Starting task 'waiting on telescope on source' 2009-Jul-30 01:40:43 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2009-Jul-30 01:40:44 WARNING CIMA-warn_on_position: WARNING the telescope is close (Az = 385.2) to the azimuth limit 360 degrees! 2009-Jul-30 01:40:44 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 385.1824 18.1774 RA/Dec = 23:00:54 +16:10:59 2009-Jul-30 01:41:14 WARNING CIMA-warn_on_position: WARNING the telescope is close (Az = 372.7) to the azimuth limit 360 degrees! 2009-Jul-30 01:41:14 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 372.6818 18.0582 RA/Dec = 23:00:54 +16:10:59 2009-Jul-30 01:41:44 WARNING CIMA-warn_on_position: WARNING the telescope is close (Az = 360.2) to the azimuth limit 360 degrees! 2009-Jul-30 01:41:44 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 360.1812 17.9389 RA/Dec = 23:00:54 +16:10:59 2009-Jul-30 01:45:21 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jul-30 01:45:21 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2009-Jul-30 01:45:21 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jul-30 01:45:21 INFO2 waittrk: Now tracking J230054+161059 2009-Jul-30 01:45:21 LOG4 waittrk: Current telescope position: Az = 274.01 ZA = 17.08 2009-Jul-30 01:45:21 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jul-30 01:45:21 LOG5 finish_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2009-Jul-30 01:45:21 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Jul-30 01:45:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 01:45:21 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jul-30 01:45:21 LOG5 end_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2009-Jul-30 01:45:21 START begin_task: Starting task 'selecting calibration type' 2009-Jul-30 01:45:21 LOG5 begin_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2009-Jul-30 01:45:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jul-30 01:45:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jul-30 01:45:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 01:45:21 START begin_task: Starting task 'waiting on setcal' 2009-Jul-30 01:45:21 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2009-Jul-30 01:45:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jul-30 01:45:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 01:45:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:45:22 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-30 01:45:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jul-30 01:45:22 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2009-Jul-30 01:45:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jul-30 01:45:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jul-30 01:45:22 LOG5 end_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2009-Jul-30 01:45:22 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2009-Jul-30 01:45:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2009-Jul-30 01:45:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2009-Jul-30 01:45:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2009-Jul-30 01:45:22 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090730.a2048.0000.fits' is empty! 2009-Jul-30 01:45:22 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2009-Jul-30 01:45:22 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2009-Jul-30 01:45:22 START begin_task: Starting task 'clearing telescope offsets' 2009-Jul-30 01:45:22 LOG5 begin_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2009-Jul-30 01:45:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2009-Jul-30 01:45:22 INFO3 clear_offsets: Removing telescope offsets 2009-Jul-30 01:45:22 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J230054+161059" 2009-Jul-30 01:45:22 LOG3 vw_send: To DATATAKING: pnt tr 230054.000000 161059.000000 -CJ 2009-Jul-30 01:45:22 STOP finish_task: Finishing task 'clearing telescope offsets' 2009-Jul-30 01:45:22 LOG5 finish_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2009-Jul-30 01:45:22 INFO2 finish_task: DONE finished clearing: telescope offsets 2009-Jul-30 01:45:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 01:45:22 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2009-Jul-30 01:45:22 LOG5 end_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2009-Jul-30 01:45:22 START begin_task: Starting task 'waiting on telescope' 2009-Jul-30 01:45:22 LOG5 begin_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2009-Jul-30 01:45:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jul-30 01:45:22 LOG3 waittrk: Start waittrk 5 2009-Jul-30 01:45:22 START begin_task: Starting task 'waiting on telescope movement' 2009-Jul-30 01:45:22 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Jul-30 01:45:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:45:22 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J230054+161059" 2009-Jul-30 01:45:22 LOG4 got_cormsg: From DATATAKING: pnt tr 230054.000000 161059.000000 -CJ 2009-Jul-30 01:45:22 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jul-30 01:45:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Jul-30 01:45:27 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jul-30 01:45:27 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Jul-30 01:45:27 START begin_task: Starting task 'waiting on telescope on source' 2009-Jul-30 01:45:27 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2009-Jul-30 01:45:29 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jul-30 01:45:29 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2009-Jul-30 01:45:29 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jul-30 01:45:29 INFO2 waittrk: Now tracking J230054+161059 2009-Jul-30 01:45:29 LOG4 waittrk: Current telescope position: Az = 274.02 ZA = 17.05 2009-Jul-30 01:45:29 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jul-30 01:45:29 LOG5 finish_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2009-Jul-30 01:45:29 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Jul-30 01:45:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 01:45:29 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jul-30 01:45:29 LOG5 end_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2009-Jul-30 01:45:29 LOG5 antvel: Calling 'antvel 230054.000000 161059.000000 J 0' 2009-Jul-30 01:45:29 LOG2 antvel: Precessing RA = 23:00:54.0 Dec = +16:10:59.0 Epoch = 2009.57789 J 2009-Jul-30 01:45:29 LOG2 antvel: Computed apparent RA = 23:01:24.4 Dec = +16:14:10.9 2009-Jul-30 01:45:29 LOG2 antvel: Parameters to Doppler: Heliocentric 20729 2009 211 0.0 2009-Jul-30 01:45:29 INFO5 antvel: Computed antenna velocity: -19.70827 km/s 2009-Jul-30 01:45:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=2050.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-19.7082736893 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-Jul-30 01:45:29 INFO4 dopset_gen: New sky frequencies: 1410.851641 1410.851641 1410.851641 1410.851641 1410.851641 1410.851641 1410.851641 1410.851641 1410.851641 2009-Jul-30 01:45:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1410.851641 sky0=1410.851641 sky1=1410.851641 sky2=1410.851641 sky3=1410.851641 sky4=1410.851641 sky5=1410.851641 sky6=1410.851641 sky7=1410.851641 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2009-Jul-30 01:45:29 LOG2 dopset_gen: Result from 'sky2syn': 2160.851641 1025.000000 1025.000000 1025.000000 1025.000000 1025.000000 1025.000000 1025.000000 1025.000000 2009-Jul-30 01:45:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 2160851641.0} 2009-Jul-30 01:45:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1025000000.0 1025000000.0 1025000000.0 1025000000.0 1025000000.0 1025000000.0 1025000000.0 1025000000.0} 2009-Jul-30 01:45:29 START begin_task: Starting task 'adjusting WAPP power' 2009-Jul-30 01:45:29 LOG5 begin_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2009-Jul-30 01:45:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Jul-30 01:45:29 INFO2 adjust_power: Starting to adjust WAPP power 2009-Jul-30 01:45:29 LOG3 vw_send: To DATATAKING: adjpwrif1 2009-Jul-30 01:45:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2009-Jul-30 01:45:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 01:45:29 START begin_task: Starting task 'waiting on adjpwrif1' 2009-Jul-30 01:45:29 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2009-Jul-30 01:45:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 2160851641.0} 2009-Jul-30 01:45:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1025000000.0 1025000000.0 1025000000.0 1025000000.0 1025000000.0 1025000000.0 1025000000.0 1025000000.0} 2009-Jul-30 01:45:29 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2009-Jul-30 01:45:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 01:45:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:45:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:45:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:45:32 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-30 01:45:32 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2009-Jul-30 01:45:32 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2009-Jul-30 01:45:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2009-Jul-30 01:45:32 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Jul-30 01:45:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Jul-30 01:45:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 01:45:32 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Jul-30 01:45:32 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Jul-30 01:45:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:45:32 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Jul-30 01:45:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 01:45:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:45:33 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-30 01:45:33 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Jul-30 01:45:33 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Jul-30 01:45:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Jul-30 01:45:33 START begin_task: Starting task 'adjusting WAPP power' 2009-Jul-30 01:45:33 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2009-Jul-30 01:45:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Jul-30 01:45:33 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2009-Jul-30 01:45:33 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2009-Jul-30 01:45:33 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2009-Jul-30 01:45:33 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2009-Jul-30 01:45:33 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Jul-30 01:45:33 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2009-Jul-30 01:45:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:45:34 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 15 12 dB 2009-Jul-30 01:45:34 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2009-Jul-30 01:45:34 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2009-Jul-30 01:45:34 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2009-Jul-30 01:45:34 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2009-Jul-30 01:45:34 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 4 15 dB 2009-Jul-30 01:45:34 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 15 4 dB 2009-Jul-30 01:45:34 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 8 15 dB 2009-Jul-30 01:45:34 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Jul-30 01:45:34 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Jul-30 01:45:34 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2009-Jul-30 01:45:34 INFO2 wapp_adjpwr: WAPP power: 2.098 1.645 4.203 4.295 2009-Jul-30 01:45:34 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jul-30 01:45:34 LOG5 finish_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2009-Jul-30 01:45:34 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Jul-30 01:45:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 01:45:34 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jul-30 01:45:34 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2009-Jul-30 01:45:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jul-30 01:45:34 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jul-30 01:45:34 LOG5 finish_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2009-Jul-30 01:45:34 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Jul-30 01:45:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 01:45:34 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jul-30 01:45:34 LOG5 end_task: Level: (2) ID = <10037> Status = 0 0 0 0 ok 2009-Jul-30 01:45:34 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2009-Jul-30 01:45:34 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON -' 2009-Jul-30 01:45:34 START begin_task: Starting task 'WAPP spectral observation' 2009-Jul-30 01:45:34 LOG5 begin_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2009-Jul-30 01:45:34 INFO2 take_data: Starting WAPP scan: 921100007 2009-Jul-30 01:45:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 2009-Jul-30 01:45:35 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jul-30 01:45:35 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Jul-30 01:45:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 01:45:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20736.00 2009-Jul-30 01:45:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 2160.851641 MHz --- rfnum = 5 ifnum = 2 inpfrq = 2 2009-Jul-30 01:45:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1410.851641 MHz Flip = 0 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 01:45:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1410.851641 MHz Flip = 0 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 01:45:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1410.851641 MHz Flip = 0 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 01:45:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1410.851641 MHz Flip = 0 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 01:45:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (4.370 > 2.0)! 2009-Jul-30 01:45:37 LOG4 check_wapp_levels: WAPP-1 power levels: 2.100 0.000 0.000 0.000 2009-Jul-30 01:45:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 1.670 0.000 0.000 2009-Jul-30 01:45:37 LOG4 check_wapp_levels: WAPP-3 power levels: 4.287 0.000 0.000 0.000 2009-Jul-30 01:45:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 4.370 0.000 0.000 2009-Jul-30 01:45:39 INFO5 check_wapp_levels: WAPP power levels are between 1.669 and 4.367 (still bad) 2009-Jul-30 01:45:41 INFO5 check_wapp_levels: WAPP power levels are between 1.669 and 4.370 (still bad) 2009-Jul-30 01:45:43 INFO5 check_wapp_levels: WAPP power levels are between 1.669 and 4.367 (still bad) 2009-Jul-30 01:45:45 INFO5 check_wapp_levels: WAPP power levels are between 1.668 and 4.365 (still bad) 2009-Jul-30 01:45:47 INFO5 check_wapp_levels: WAPP power levels are between 1.669 and 4.366 (still bad) 2009-Jul-30 01:45:49 INFO5 check_wapp_levels: WAPP power levels are between 1.668 and 4.366 (still bad) 2009-Jul-30 01:45:51 INFO5 check_wapp_levels: WAPP power levels are between 1.667 and 4.362 (still bad) 2009-Jul-30 01:45:53 INFO5 check_wapp_levels: WAPP power levels are between 1.666 and 4.361 (still bad) 2009-Jul-30 01:45:55 INFO5 check_wapp_levels: WAPP power levels are between 1.666 and 4.357 (still bad) 2009-Jul-30 01:45:57 INFO5 check_wapp_levels: WAPP power levels are between 1.665 and 4.357 (still bad) 2009-Jul-30 01:45:59 INFO5 check_wapp_levels: WAPP power levels are between 1.665 and 4.358 (still bad) 2009-Jul-30 01:46:01 INFO5 check_wapp_levels: WAPP power levels are between 1.665 and 4.359 (still bad) 2009-Jul-30 01:46:03 INFO5 check_wapp_levels: WAPP power levels are between 1.665 and 4.357 (still bad) 2009-Jul-30 01:46:05 INFO5 check_wapp_levels: WAPP power levels are between 1.664 and 4.355 (still bad) 2009-Jul-30 01:46:07 INFO5 check_wapp_levels: WAPP power levels are between 1.663 and 4.354 (still bad) 2009-Jul-30 01:46:09 INFO5 check_wapp_levels: WAPP power levels are between 1.664 and 4.353 (still bad) 2009-Jul-30 01:46:11 INFO5 check_wapp_levels: WAPP power levels are between 1.663 and 4.354 (still bad) 2009-Jul-30 01:46:13 INFO5 check_wapp_levels: WAPP power levels are between 1.664 and 4.353 (still bad) 2009-Jul-30 01:46:15 INFO5 check_wapp_levels: WAPP power levels are between 1.663 and 4.352 (still bad) 2009-Jul-30 01:46:17 INFO5 check_wapp_levels: WAPP power levels are between 1.663 and 4.351 (still bad) 2009-Jul-30 01:46:19 INFO5 check_wapp_levels: WAPP power levels are between 1.662 and 4.349 (still bad) 2009-Jul-30 01:46:21 INFO5 check_wapp_levels: WAPP power levels are between 1.662 and 4.350 (still bad) 2009-Jul-30 01:46:23 INFO5 check_wapp_levels: WAPP power levels are between 1.661 and 4.347 (still bad) 2009-Jul-30 01:46:25 INFO5 check_wapp_levels: WAPP power levels are between 1.661 and 4.346 (still bad) 2009-Jul-30 01:46:27 INFO5 check_wapp_levels: WAPP power levels are between 1.660 and 4.344 (still bad) 2009-Jul-30 01:46:29 INFO5 check_wapp_levels: WAPP power levels are between 1.660 and 4.344 (still bad) 2009-Jul-30 01:46:31 INFO5 check_wapp_levels: WAPP power levels are between 1.660 and 4.345 (still bad) 2009-Jul-30 01:46:33 INFO5 check_wapp_levels: WAPP power levels are between 1.659 and 4.342 (still bad) 2009-Jul-30 01:46:35 INFO5 check_wapp_levels: WAPP power levels are between 1.661 and 4.347 (still bad) 2009-Jul-30 01:46:37 INFO5 check_wapp_levels: WAPP power levels are between 1.660 and 4.345 (still bad) 2009-Jul-30 01:46:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (4.343 > 2.0)! 2009-Jul-30 01:46:40 LOG4 check_wapp_levels: WAPP-1 power levels: 2.089 0.000 0.000 0.000 2009-Jul-30 01:46:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 1.659 0.000 0.000 2009-Jul-30 01:46:40 LOG4 check_wapp_levels: WAPP-3 power levels: 4.264 0.000 0.000 0.000 2009-Jul-30 01:46:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 4.343 0.000 0.000 2009-Jul-30 01:46:42 INFO5 check_wapp_levels: WAPP power levels are between 1.659 and 4.342 (still bad) 2009-Jul-30 01:46:44 INFO5 check_wapp_levels: WAPP power levels are between 1.659 and 4.341 (still bad) 2009-Jul-30 01:46:46 INFO5 check_wapp_levels: WAPP power levels are between 1.658 and 4.340 (still bad) 2009-Jul-30 01:46:48 INFO5 check_wapp_levels: WAPP power levels are between 1.658 and 4.339 (still bad) 2009-Jul-30 01:46:50 INFO5 check_wapp_levels: WAPP power levels are between 1.657 and 4.338 (still bad) 2009-Jul-30 01:46:52 INFO5 check_wapp_levels: WAPP power levels are between 1.657 and 4.338 (still bad) 2009-Jul-30 01:46:54 INFO5 check_wapp_levels: WAPP power levels are between 1.657 and 4.337 (still bad) 2009-Jul-30 01:46:56 INFO5 check_wapp_levels: WAPP power levels are between 1.656 and 4.333 (still bad) 2009-Jul-30 01:46:58 INFO5 check_wapp_levels: WAPP power levels are between 1.656 and 4.335 (still bad) 2009-Jul-30 01:47:00 INFO5 check_wapp_levels: WAPP power levels are between 1.657 and 4.337 (still bad) 2009-Jul-30 01:47:02 INFO5 check_wapp_levels: WAPP power levels are between 1.656 and 4.334 (still bad) 2009-Jul-30 01:47:04 INFO5 check_wapp_levels: WAPP power levels are between 1.655 and 4.332 (still bad) 2009-Jul-30 01:47:06 INFO5 check_wapp_levels: WAPP power levels are between 1.655 and 4.332 (still bad) 2009-Jul-30 01:47:08 INFO5 check_wapp_levels: WAPP power levels are between 1.654 and 4.329 (still bad) 2009-Jul-30 01:47:10 INFO5 check_wapp_levels: WAPP power levels are between 1.653 and 4.326 (still bad) 2009-Jul-30 01:47:12 INFO5 check_wapp_levels: WAPP power levels are between 1.653 and 4.327 (still bad) 2009-Jul-30 01:47:14 INFO5 check_wapp_levels: WAPP power levels are between 1.653 and 4.326 (still bad) 2009-Jul-30 01:47:16 INFO5 check_wapp_levels: WAPP power levels are between 1.652 and 4.323 (still bad) 2009-Jul-30 01:47:18 INFO5 check_wapp_levels: WAPP power levels are between 1.653 and 4.327 (still bad) 2009-Jul-30 01:47:20 INFO5 check_wapp_levels: WAPP power levels are between 1.652 and 4.324 (still bad) 2009-Jul-30 01:47:22 INFO5 check_wapp_levels: WAPP power levels are between 1.651 and 4.320 (still bad) 2009-Jul-30 01:47:24 INFO5 check_wapp_levels: WAPP power levels are between 1.651 and 4.321 (still bad) 2009-Jul-30 01:47:26 INFO5 check_wapp_levels: WAPP power levels are between 1.651 and 4.321 (still bad) 2009-Jul-30 01:47:28 INFO5 check_wapp_levels: WAPP power levels are between 1.650 and 4.318 (still bad) 2009-Jul-30 01:47:30 INFO5 check_wapp_levels: WAPP power levels are between 1.649 and 4.317 (still bad) 2009-Jul-30 01:47:32 INFO5 check_wapp_levels: WAPP power levels are between 1.649 and 4.316 (still bad) 2009-Jul-30 01:47:34 INFO5 check_wapp_levels: WAPP power levels are between 1.649 and 4.315 (still bad) 2009-Jul-30 01:47:36 INFO5 check_wapp_levels: WAPP power levels are between 1.649 and 4.316 (still bad) 2009-Jul-30 01:47:38 INFO5 check_wapp_levels: WAPP power levels are between 1.649 and 4.316 (still bad) 2009-Jul-30 01:47:40 INFO5 check_wapp_levels: WAPP power levels are between 1.649 and 4.315 (still bad) 2009-Jul-30 01:47:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (4.312 > 2.0)! 2009-Jul-30 01:47:42 LOG4 check_wapp_levels: WAPP-1 power levels: 2.078 0.000 0.000 0.000 2009-Jul-30 01:47:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 1.648 0.000 0.000 2009-Jul-30 01:47:42 LOG4 check_wapp_levels: WAPP-3 power levels: 4.240 0.000 0.000 0.000 2009-Jul-30 01:47:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 4.312 0.000 0.000 2009-Jul-30 01:47:44 INFO5 check_wapp_levels: WAPP power levels are between 1.648 and 4.312 (still bad) 2009-Jul-30 01:47:46 INFO5 check_wapp_levels: WAPP power levels are between 1.648 and 4.312 (still bad) 2009-Jul-30 01:47:48 INFO5 check_wapp_levels: WAPP power levels are between 1.647 and 4.309 (still bad) 2009-Jul-30 01:47:50 INFO5 check_wapp_levels: WAPP power levels are between 1.647 and 4.308 (still bad) 2009-Jul-30 01:47:52 INFO5 check_wapp_levels: WAPP power levels are between 1.647 and 4.309 (still bad) 2009-Jul-30 01:47:54 INFO5 check_wapp_levels: WAPP power levels are between 1.645 and 4.308 (still bad) 2009-Jul-30 01:47:56 INFO5 check_wapp_levels: WAPP power levels are between 1.646 and 4.309 (still bad) 2009-Jul-30 01:47:58 INFO5 check_wapp_levels: WAPP power levels are between 1.645 and 4.307 (still bad) 2009-Jul-30 01:48:00 INFO5 check_wapp_levels: WAPP power levels are between 1.644 and 4.304 (still bad) 2009-Jul-30 01:48:02 INFO5 check_wapp_levels: WAPP power levels are between 1.645 and 4.306 (still bad) 2009-Jul-30 01:48:04 INFO5 check_wapp_levels: WAPP power levels are between 1.644 and 4.302 (still bad) 2009-Jul-30 01:48:06 INFO5 check_wapp_levels: WAPP power levels are between 1.643 and 4.301 (still bad) 2009-Jul-30 01:48:09 INFO5 check_wapp_levels: WAPP power levels are between 1.643 and 4.298 (still bad) 2009-Jul-30 01:48:11 INFO5 check_wapp_levels: WAPP power levels are between 1.643 and 4.299 (still bad) 2009-Jul-30 01:48:13 INFO5 check_wapp_levels: WAPP power levels are between 1.643 and 4.301 (still bad) 2009-Jul-30 01:48:15 INFO5 check_wapp_levels: WAPP power levels are between 1.642 and 4.299 (still bad) 2009-Jul-30 01:48:17 INFO5 check_wapp_levels: WAPP power levels are between 1.641 and 4.297 (still bad) 2009-Jul-30 01:48:19 INFO5 check_wapp_levels: WAPP power levels are between 1.642 and 4.297 (still bad) 2009-Jul-30 01:48:21 INFO5 check_wapp_levels: WAPP power levels are between 1.641 and 4.294 (still bad) 2009-Jul-30 01:48:23 INFO5 check_wapp_levels: WAPP power levels are between 1.641 and 4.294 (still bad) 2009-Jul-30 01:48:25 INFO5 check_wapp_levels: WAPP power levels are between 1.641 and 4.295 (still bad) 2009-Jul-30 01:48:27 INFO5 check_wapp_levels: WAPP power levels are between 1.640 and 4.292 (still bad) 2009-Jul-30 01:48:29 INFO5 check_wapp_levels: WAPP power levels are between 1.639 and 4.290 (still bad) 2009-Jul-30 01:48:31 INFO5 check_wapp_levels: WAPP power levels are between 1.640 and 4.292 (still bad) 2009-Jul-30 01:48:33 INFO5 check_wapp_levels: WAPP power levels are between 1.640 and 4.292 (still bad) 2009-Jul-30 01:48:35 INFO5 check_wapp_levels: WAPP power levels are between 1.639 and 4.288 (still bad) 2009-Jul-30 01:48:37 INFO5 check_wapp_levels: WAPP power levels are between 1.639 and 4.291 (still bad) 2009-Jul-30 01:48:39 INFO5 check_wapp_levels: WAPP power levels are between 1.639 and 4.288 (still bad) 2009-Jul-30 01:48:41 INFO5 check_wapp_levels: WAPP power levels are between 1.638 and 4.285 (still bad) 2009-Jul-30 01:48:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (4.289 > 2.0)! 2009-Jul-30 01:48:43 LOG4 check_wapp_levels: WAPP-1 power levels: 2.068 0.000 0.000 0.000 2009-Jul-30 01:48:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 1.639 0.000 0.000 2009-Jul-30 01:48:43 LOG4 check_wapp_levels: WAPP-3 power levels: 4.218 0.000 0.000 0.000 2009-Jul-30 01:48:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 4.289 0.000 0.000 2009-Jul-30 01:48:45 INFO5 check_wapp_levels: WAPP power levels are between 1.638 and 4.286 (still bad) 2009-Jul-30 01:48:47 INFO5 check_wapp_levels: WAPP power levels are between 1.638 and 4.285 (still bad) 2009-Jul-30 01:48:49 INFO5 check_wapp_levels: WAPP power levels are between 1.637 and 4.284 (still bad) 2009-Jul-30 01:48:51 INFO5 check_wapp_levels: WAPP power levels are between 1.637 and 4.285 (still bad) 2009-Jul-30 01:48:53 INFO5 check_wapp_levels: WAPP power levels are between 1.637 and 4.281 (still bad) 2009-Jul-30 01:48:55 INFO5 check_wapp_levels: WAPP power levels are between 1.637 and 4.282 (still bad) 2009-Jul-30 01:48:57 INFO5 check_wapp_levels: WAPP power levels are between 1.636 and 4.279 (still bad) 2009-Jul-30 01:48:59 INFO5 check_wapp_levels: WAPP power levels are between 1.636 and 4.282 (still bad) 2009-Jul-30 01:49:01 INFO5 check_wapp_levels: WAPP power levels are between 1.635 and 4.279 (still bad) 2009-Jul-30 01:49:03 INFO5 check_wapp_levels: WAPP power levels are between 1.635 and 4.277 (still bad) 2009-Jul-30 01:49:05 INFO5 check_wapp_levels: WAPP power levels are between 1.635 and 4.278 (still bad) 2009-Jul-30 01:49:07 INFO5 check_wapp_levels: WAPP power levels are between 1.636 and 4.278 (still bad) 2009-Jul-30 01:49:09 INFO5 check_wapp_levels: WAPP power levels are between 1.635 and 4.277 (still bad) 2009-Jul-30 01:49:11 INFO5 check_wapp_levels: WAPP power levels are between 1.634 and 4.275 (still bad) 2009-Jul-30 01:49:13 INFO5 check_wapp_levels: WAPP power levels are between 1.635 and 4.277 (still bad) 2009-Jul-30 01:49:15 INFO5 check_wapp_levels: WAPP power levels are between 1.634 and 4.276 (still bad) 2009-Jul-30 01:49:17 INFO5 check_wapp_levels: WAPP power levels are between 1.633 and 4.272 (still bad) 2009-Jul-30 01:49:19 INFO5 check_wapp_levels: WAPP power levels are between 1.632 and 4.271 (still bad) 2009-Jul-30 01:49:21 INFO5 check_wapp_levels: WAPP power levels are between 1.632 and 4.271 (still bad) 2009-Jul-30 01:49:23 INFO5 check_wapp_levels: WAPP power levels are between 1.632 and 4.269 (still bad) 2009-Jul-30 01:49:25 INFO5 check_wapp_levels: WAPP power levels are between 1.632 and 4.272 (still bad) 2009-Jul-30 01:49:27 INFO5 check_wapp_levels: WAPP power levels are between 1.632 and 4.270 (still bad) 2009-Jul-30 01:49:29 INFO5 check_wapp_levels: WAPP power levels are between 1.631 and 4.269 (still bad) 2009-Jul-30 01:49:31 INFO5 check_wapp_levels: WAPP power levels are between 1.632 and 4.268 (still bad) 2009-Jul-30 01:49:34 INFO5 check_wapp_levels: WAPP power levels are between 1.631 and 4.268 (still bad) 2009-Jul-30 01:49:36 INFO5 check_wapp_levels: WAPP power levels are between 1.630 and 4.266 (still bad) 2009-Jul-30 01:49:38 INFO5 check_wapp_levels: WAPP power levels are between 1.631 and 4.266 (still bad) 2009-Jul-30 01:49:40 INFO5 check_wapp_levels: WAPP power levels are between 1.630 and 4.266 (still bad) 2009-Jul-30 01:49:42 INFO5 check_wapp_levels: WAPP power levels are between 1.630 and 4.264 (still bad) 2009-Jul-30 01:49:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (4.264 > 2.0)! 2009-Jul-30 01:49:44 LOG4 check_wapp_levels: WAPP-1 power levels: 2.059 0.000 0.000 0.000 2009-Jul-30 01:49:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 1.630 0.000 0.000 2009-Jul-30 01:49:44 LOG4 check_wapp_levels: WAPP-3 power levels: 4.199 0.000 0.000 0.000 2009-Jul-30 01:49:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 4.264 0.000 0.000 2009-Jul-30 01:49:46 INFO5 check_wapp_levels: WAPP power levels are between 1.629 and 4.262 (still bad) 2009-Jul-30 01:49:48 INFO5 check_wapp_levels: WAPP power levels are between 1.630 and 4.265 (still bad) 2009-Jul-30 01:49:50 INFO5 check_wapp_levels: WAPP power levels are between 1.629 and 4.262 (still bad) 2009-Jul-30 01:49:52 INFO5 check_wapp_levels: WAPP power levels are between 1.629 and 4.264 (still bad) 2009-Jul-30 01:49:54 INFO5 check_wapp_levels: WAPP power levels are between 1.629 and 4.263 (still bad) 2009-Jul-30 01:49:56 INFO5 check_wapp_levels: WAPP power levels are between 1.628 and 4.261 (still bad) 2009-Jul-30 01:49:58 INFO5 check_wapp_levels: WAPP power levels are between 1.629 and 4.262 (still bad) 2009-Jul-30 01:50:00 INFO5 check_wapp_levels: WAPP power levels are between 1.627 and 4.259 (still bad) 2009-Jul-30 01:50:02 INFO5 check_wapp_levels: WAPP power levels are between 1.627 and 4.255 (still bad) 2009-Jul-30 01:50:04 INFO5 check_wapp_levels: WAPP power levels are between 1.627 and 4.258 (still bad) 2009-Jul-30 01:50:06 INFO5 check_wapp_levels: WAPP power levels are between 1.626 and 4.254 (still bad) 2009-Jul-30 01:50:08 INFO5 check_wapp_levels: WAPP power levels are between 1.627 and 4.255 (still bad) 2009-Jul-30 01:50:10 INFO5 check_wapp_levels: WAPP power levels are between 1.627 and 4.256 (still bad) 2009-Jul-30 01:50:12 INFO5 check_wapp_levels: WAPP power levels are between 1.627 and 4.258 (still bad) 2009-Jul-30 01:50:14 INFO5 check_wapp_levels: WAPP power levels are between 1.626 and 4.253 (still bad) 2009-Jul-30 01:50:16 INFO5 check_wapp_levels: WAPP power levels are between 1.625 and 4.254 (still bad) 2009-Jul-30 01:50:18 INFO5 check_wapp_levels: WAPP power levels are between 1.625 and 4.251 (still bad) 2009-Jul-30 01:50:20 INFO5 check_wapp_levels: WAPP power levels are between 1.624 and 4.249 (still bad) 2009-Jul-30 01:50:22 INFO5 check_wapp_levels: WAPP power levels are between 1.624 and 4.248 (still bad) 2009-Jul-30 01:50:24 INFO5 check_wapp_levels: WAPP power levels are between 1.624 and 4.251 (still bad) 2009-Jul-30 01:50:26 INFO5 check_wapp_levels: WAPP power levels are between 1.625 and 4.249 (still bad) 2009-Jul-30 01:50:28 INFO5 check_wapp_levels: WAPP power levels are between 1.624 and 4.251 (still bad) 2009-Jul-30 01:50:30 INFO5 check_wapp_levels: WAPP power levels are between 1.623 and 4.247 (still bad) 2009-Jul-30 01:50:32 INFO5 check_wapp_levels: WAPP power levels are between 1.624 and 4.247 (still bad) 2009-Jul-30 01:50:34 INFO5 check_wapp_levels: WAPP power levels are between 1.624 and 4.250 (still bad) 2009-Jul-30 01:50:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 01:50:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jul-30 01:50:36 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Jul-30 01:50:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jul-30 01:50:36 LOG5 end_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2009-Jul-30 01:50:36 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2009-Jul-30 01:50:36 LOG2 onoff_wapp: Parameters: RA-offset: -90.95729999999925 arcminutes wait: 60 secs 2009-Jul-30 01:50:36 LOG4 track_offsets: Calling 'track_offsets -90.95729999999925 0.0 main small' 2009-Jul-30 01:50:36 START begin_task: Starting task 'sending telescope offsets' 2009-Jul-30 01:50:36 LOG5 begin_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2009-Jul-30 01:50:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2009-Jul-30 01:50:36 INFO2 track_offsets: Starting to send new offsets 2009-Jul-30 01:50:36 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J230054+161059" 2009-Jul-30 01:50:36 LOG3 vw_send: To DATATAKING: pnt tr 230054.000000 161059.000000 -CJ -o -UD -1.51595 0.0 -CH 2009-Jul-30 01:50:36 STOP finish_task: Finishing task 'sending telescope offsets' 2009-Jul-30 01:50:36 LOG5 finish_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2009-Jul-30 01:50:36 INFO2 finish_task: DONE finished sending: telescope offsets 2009-Jul-30 01:50:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 01:50:36 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2009-Jul-30 01:50:36 LOG5 end_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2009-Jul-30 01:50:36 INFO2 lstwait: Waiting for 59.8 secs from LST 21:55:36 to LST 21:56:36 ... 2009-Jul-30 01:50:36 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836175999996598 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Jul-30 01:50:36 START begin_task: Starting task 'waiting on wait on LST' 2009-Jul-30 01:50:36 LOG5 begin_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2009-Jul-30 01:50:36 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J230054+161059" 2009-Jul-30 01:50:36 LOG4 got_cormsg: From DATATAKING: pnt tr 230054.000000 161059.000000 -CJ -o -UD -1.51595 0.0 -CH 2009-Jul-30 01:50:36 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jul-30 01:50:36 INFO5 check_wapp_levels: WAPP power levels are between 1.624 and 4.248 (still bad) 2009-Jul-30 01:51:19 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'J230054+161059' (after 43 seconds) 2009-Jul-30 01:51:36 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Jul-30 01:51:36 LOG5 end_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2009-Jul-30 01:51:36 LOG4 lstwait: Finished waiting 0.17 seconds late 2009-Jul-30 01:51:36 INFO3 lstwait: Finished waiting 2009-Jul-30 01:51:36 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jul-30 01:51:36 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2009-Jul-30 01:51:36 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF -' 2009-Jul-30 01:51:36 START begin_task: Starting task 'WAPP spectral observation' 2009-Jul-30 01:51:36 LOG5 begin_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2009-Jul-30 01:51:36 INFO2 take_data: Starting WAPP scan: 921100008 2009-Jul-30 01:51:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 2009-Jul-30 01:51:37 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jul-30 01:51:37 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2009-Jul-30 01:51:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 01:51:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21098.00 2009-Jul-30 01:51:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 2160.851641 MHz --- rfnum = 5 ifnum = 2 inpfrq = 2 2009-Jul-30 01:51:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1410.851641 MHz Flip = 0 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 01:51:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1410.851641 MHz Flip = 0 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 01:51:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1410.851641 MHz Flip = 0 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 01:51:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1410.851641 MHz Flip = 0 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 01:51:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (4.248 > 2.0)! 2009-Jul-30 01:51:39 LOG4 check_wapp_levels: WAPP-1 power levels: 2.050 0.000 0.000 0.000 2009-Jul-30 01:51:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 1.624 0.000 0.000 2009-Jul-30 01:51:39 LOG4 check_wapp_levels: WAPP-3 power levels: 4.186 0.000 0.000 0.000 2009-Jul-30 01:51:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 4.248 0.000 0.000 2009-Jul-30 01:51:41 INFO5 check_wapp_levels: WAPP power levels are between 1.676 and 4.384 (still bad) 2009-Jul-30 01:51:43 INFO5 check_wapp_levels: WAPP power levels are between 1.676 and 4.385 (still bad) 2009-Jul-30 01:51:45 INFO5 check_wapp_levels: WAPP power levels are between 1.675 and 4.384 (still bad) 2009-Jul-30 01:51:47 INFO5 check_wapp_levels: WAPP power levels are between 1.674 and 4.380 (still bad) 2009-Jul-30 01:51:49 INFO5 check_wapp_levels: WAPP power levels are between 1.674 and 4.380 (still bad) 2009-Jul-30 01:51:51 INFO5 check_wapp_levels: WAPP power levels are between 1.675 and 4.385 (still bad) 2009-Jul-30 01:51:53 INFO5 check_wapp_levels: WAPP power levels are between 1.674 and 4.383 (still bad) 2009-Jul-30 01:51:55 INFO5 check_wapp_levels: WAPP power levels are between 1.674 and 4.380 (still bad) 2009-Jul-30 01:51:57 INFO5 check_wapp_levels: WAPP power levels are between 1.672 and 4.377 (still bad) 2009-Jul-30 01:51:59 INFO5 check_wapp_levels: WAPP power levels are between 1.672 and 4.376 (still bad) 2009-Jul-30 01:52:01 INFO5 check_wapp_levels: WAPP power levels are between 1.673 and 4.377 (still bad) 2009-Jul-30 01:52:03 INFO5 check_wapp_levels: WAPP power levels are between 1.671 and 4.372 (still bad) 2009-Jul-30 01:52:05 INFO5 check_wapp_levels: WAPP power levels are between 1.672 and 4.371 (still bad) 2009-Jul-30 01:52:07 INFO5 check_wapp_levels: WAPP power levels are between 1.670 and 4.372 (still bad) 2009-Jul-30 01:52:09 INFO5 check_wapp_levels: WAPP power levels are between 1.670 and 4.369 (still bad) 2009-Jul-30 01:52:11 INFO5 check_wapp_levels: WAPP power levels are between 1.671 and 4.373 (still bad) 2009-Jul-30 01:52:13 INFO5 check_wapp_levels: WAPP power levels are between 1.669 and 4.367 (still bad) 2009-Jul-30 01:52:15 INFO5 check_wapp_levels: WAPP power levels are between 1.669 and 4.367 (still bad) 2009-Jul-30 01:52:17 INFO5 check_wapp_levels: WAPP power levels are between 1.668 and 4.363 (still bad) 2009-Jul-30 01:52:19 INFO5 check_wapp_levels: WAPP power levels are between 1.668 and 4.366 (still bad) 2009-Jul-30 01:52:21 INFO5 check_wapp_levels: WAPP power levels are between 1.667 and 4.364 (still bad) 2009-Jul-30 01:52:23 INFO5 check_wapp_levels: WAPP power levels are between 1.668 and 4.366 (still bad) 2009-Jul-30 01:52:25 INFO5 check_wapp_levels: WAPP power levels are between 1.669 and 4.368 (still bad) 2009-Jul-30 01:52:27 INFO5 check_wapp_levels: WAPP power levels are between 1.667 and 4.364 (still bad) 2009-Jul-30 01:52:29 INFO5 check_wapp_levels: WAPP power levels are between 1.667 and 4.363 (still bad) 2009-Jul-30 01:52:31 INFO5 check_wapp_levels: WAPP power levels are between 1.666 and 4.359 (still bad) 2009-Jul-30 01:52:33 INFO5 check_wapp_levels: WAPP power levels are between 1.667 and 4.360 (still bad) 2009-Jul-30 01:52:35 INFO5 check_wapp_levels: WAPP power levels are between 1.666 and 4.360 (still bad) 2009-Jul-30 01:52:38 INFO5 check_wapp_levels: WAPP power levels are between 1.667 and 4.363 (still bad) 2009-Jul-30 01:52:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (4.357 > 2.0)! 2009-Jul-30 01:52:40 LOG4 check_wapp_levels: WAPP-1 power levels: 2.097 0.000 0.000 0.000 2009-Jul-30 01:52:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 1.665 0.000 0.000 2009-Jul-30 01:52:40 LOG4 check_wapp_levels: WAPP-3 power levels: 4.281 0.000 0.000 0.000 2009-Jul-30 01:52:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 4.357 0.000 0.000 2009-Jul-30 01:52:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (99999965 != 99999966 diff = 1)! 2009-Jul-30 01:52:42 INFO5 check_wapp_levels: WAPP power levels are between 1.665 and 4.361 (still bad) 2009-Jul-30 01:52:44 INFO5 check_wapp_levels: WAPP power levels are between 1.663 and 4.353 (still bad) 2009-Jul-30 01:52:46 INFO5 check_wapp_levels: WAPP power levels are between 1.663 and 4.353 (still bad) 2009-Jul-30 01:52:48 INFO5 check_wapp_levels: WAPP power levels are between 1.663 and 4.351 (still bad) 2009-Jul-30 01:52:50 INFO5 check_wapp_levels: WAPP power levels are between 1.663 and 4.352 (still bad) 2009-Jul-30 01:52:52 INFO5 check_wapp_levels: WAPP power levels are between 1.662 and 4.350 (still bad) 2009-Jul-30 01:52:54 INFO5 check_wapp_levels: WAPP power levels are between 1.663 and 4.353 (still bad) 2009-Jul-30 01:52:56 INFO5 check_wapp_levels: WAPP power levels are between 1.662 and 4.348 (still bad) 2009-Jul-30 01:52:58 INFO5 check_wapp_levels: WAPP power levels are between 1.662 and 4.350 (still bad) 2009-Jul-30 01:53:00 INFO5 check_wapp_levels: WAPP power levels are between 1.662 and 4.350 (still bad) 2009-Jul-30 01:53:02 INFO5 check_wapp_levels: WAPP power levels are between 1.661 and 4.347 (still bad) 2009-Jul-30 01:53:04 INFO5 check_wapp_levels: WAPP power levels are between 1.661 and 4.348 (still bad) 2009-Jul-30 01:53:06 INFO5 check_wapp_levels: WAPP power levels are between 1.662 and 4.347 (still bad) 2009-Jul-30 01:53:08 INFO5 check_wapp_levels: WAPP power levels are between 1.661 and 4.346 (still bad) 2009-Jul-30 01:53:10 INFO5 check_wapp_levels: WAPP power levels are between 1.660 and 4.345 (still bad) 2009-Jul-30 01:53:12 INFO5 check_wapp_levels: WAPP power levels are between 1.660 and 4.346 (still bad) 2009-Jul-30 01:53:14 INFO5 check_wapp_levels: WAPP power levels are between 1.659 and 4.341 (still bad) 2009-Jul-30 01:53:16 INFO5 check_wapp_levels: WAPP power levels are between 1.658 and 4.337 (still bad) 2009-Jul-30 01:53:18 INFO5 check_wapp_levels: WAPP power levels are between 1.658 and 4.337 (still bad) 2009-Jul-30 01:53:20 INFO5 check_wapp_levels: WAPP power levels are between 1.657 and 4.340 (still bad) 2009-Jul-30 01:53:22 INFO5 check_wapp_levels: WAPP power levels are between 1.656 and 4.336 (still bad) 2009-Jul-30 01:53:24 INFO5 check_wapp_levels: WAPP power levels are between 1.657 and 4.335 (still bad) 2009-Jul-30 01:53:26 INFO5 check_wapp_levels: WAPP power levels are between 1.657 and 4.337 (still bad) 2009-Jul-30 01:53:28 INFO5 check_wapp_levels: WAPP power levels are between 1.656 and 4.336 (still bad) 2009-Jul-30 01:53:30 INFO5 check_wapp_levels: WAPP power levels are between 1.657 and 4.335 (still bad) 2009-Jul-30 01:53:32 INFO5 check_wapp_levels: WAPP power levels are between 1.655 and 4.331 (still bad) 2009-Jul-30 01:53:34 INFO5 check_wapp_levels: WAPP power levels are between 1.655 and 4.331 (still bad) 2009-Jul-30 01:53:36 INFO5 check_wapp_levels: WAPP power levels are between 1.656 and 4.330 (still bad) 2009-Jul-30 01:53:38 INFO5 check_wapp_levels: WAPP power levels are between 1.655 and 4.332 (still bad) 2009-Jul-30 01:53:40 INFO5 check_wapp_levels: WAPP power levels are between 1.654 and 4.329 (still bad) 2009-Jul-30 01:53:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (4.323 > 2.0)! 2009-Jul-30 01:53:42 LOG4 check_wapp_levels: WAPP-1 power levels: 2.085 0.000 0.000 0.000 2009-Jul-30 01:53:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 1.652 0.000 0.000 2009-Jul-30 01:53:42 LOG4 check_wapp_levels: WAPP-3 power levels: 4.259 0.000 0.000 0.000 2009-Jul-30 01:53:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 4.323 0.000 0.000 2009-Jul-30 01:53:44 INFO5 check_wapp_levels: WAPP power levels are between 1.653 and 4.327 (still bad) 2009-Jul-30 01:53:46 INFO5 check_wapp_levels: WAPP power levels are between 1.653 and 4.325 (still bad) 2009-Jul-30 01:53:48 INFO5 check_wapp_levels: WAPP power levels are between 1.653 and 4.325 (still bad) 2009-Jul-30 01:53:50 INFO5 check_wapp_levels: WAPP power levels are between 1.653 and 4.323 (still bad) 2009-Jul-30 01:53:52 INFO5 check_wapp_levels: WAPP power levels are between 1.651 and 4.321 (still bad) 2009-Jul-30 01:53:54 INFO5 check_wapp_levels: WAPP power levels are between 1.652 and 4.322 (still bad) 2009-Jul-30 01:53:56 INFO5 check_wapp_levels: WAPP power levels are between 1.651 and 4.319 (still bad) 2009-Jul-30 01:53:58 INFO5 check_wapp_levels: WAPP power levels are between 1.651 and 4.322 (still bad) 2009-Jul-30 01:54:00 INFO5 check_wapp_levels: WAPP power levels are between 1.651 and 4.319 (still bad) 2009-Jul-30 01:54:02 INFO5 check_wapp_levels: WAPP power levels are between 1.650 and 4.318 (still bad) 2009-Jul-30 01:54:04 INFO5 check_wapp_levels: WAPP power levels are between 1.651 and 4.320 (still bad) 2009-Jul-30 01:54:07 INFO5 check_wapp_levels: WAPP power levels are between 1.650 and 4.318 (still bad) 2009-Jul-30 01:54:09 INFO5 check_wapp_levels: WAPP power levels are between 1.650 and 4.317 (still bad) 2009-Jul-30 01:54:11 INFO5 check_wapp_levels: WAPP power levels are between 1.650 and 4.319 (still bad) 2009-Jul-30 01:54:13 INFO5 check_wapp_levels: WAPP power levels are between 1.649 and 4.312 (still bad) 2009-Jul-30 01:54:15 INFO5 check_wapp_levels: WAPP power levels are between 1.648 and 4.312 (still bad) 2009-Jul-30 01:54:17 INFO5 check_wapp_levels: WAPP power levels are between 1.647 and 4.310 (still bad) 2009-Jul-30 01:54:19 INFO5 check_wapp_levels: WAPP power levels are between 1.648 and 4.311 (still bad) 2009-Jul-30 01:54:21 INFO5 check_wapp_levels: WAPP power levels are between 1.647 and 4.310 (still bad) 2009-Jul-30 01:54:23 INFO5 check_wapp_levels: WAPP power levels are between 1.647 and 4.309 (still bad) 2009-Jul-30 01:54:25 INFO5 check_wapp_levels: WAPP power levels are between 1.648 and 4.311 (still bad) 2009-Jul-30 01:54:27 INFO5 check_wapp_levels: WAPP power levels are between 1.648 and 4.311 (still bad) 2009-Jul-30 01:54:29 INFO5 check_wapp_levels: WAPP power levels are between 1.646 and 4.306 (still bad) 2009-Jul-30 01:54:31 INFO5 check_wapp_levels: WAPP power levels are between 1.647 and 4.307 (still bad) 2009-Jul-30 01:54:33 INFO5 check_wapp_levels: WAPP power levels are between 1.645 and 4.303 (still bad) 2009-Jul-30 01:54:35 INFO5 check_wapp_levels: WAPP power levels are between 1.644 and 4.301 (still bad) 2009-Jul-30 01:54:37 INFO5 check_wapp_levels: WAPP power levels are between 1.644 and 4.302 (still bad) 2009-Jul-30 01:54:39 INFO5 check_wapp_levels: WAPP power levels are between 1.644 and 4.302 (still bad) 2009-Jul-30 01:54:41 INFO5 check_wapp_levels: WAPP power levels are between 1.645 and 4.304 (still bad) 2009-Jul-30 01:54:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (4.303 > 2.0)! 2009-Jul-30 01:54:43 LOG4 check_wapp_levels: WAPP-1 power levels: 2.074 0.000 0.000 0.000 2009-Jul-30 01:54:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 1.645 0.000 0.000 2009-Jul-30 01:54:43 LOG4 check_wapp_levels: WAPP-3 power levels: 4.236 0.000 0.000 0.000 2009-Jul-30 01:54:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 4.303 0.000 0.000 2009-Jul-30 01:54:45 INFO5 check_wapp_levels: WAPP power levels are between 1.643 and 4.296 (still bad) 2009-Jul-30 01:54:47 INFO5 check_wapp_levels: WAPP power levels are between 1.643 and 4.298 (still bad) 2009-Jul-30 01:54:49 INFO5 check_wapp_levels: WAPP power levels are between 1.644 and 4.300 (still bad) 2009-Jul-30 01:54:51 INFO5 check_wapp_levels: WAPP power levels are between 1.644 and 4.301 (still bad) 2009-Jul-30 01:54:53 INFO5 check_wapp_levels: WAPP power levels are between 1.643 and 4.297 (still bad) 2009-Jul-30 01:54:55 INFO5 check_wapp_levels: WAPP power levels are between 1.643 and 4.301 (still bad) 2009-Jul-30 01:54:57 INFO5 check_wapp_levels: WAPP power levels are between 1.643 and 4.296 (still bad) 2009-Jul-30 01:54:59 INFO5 check_wapp_levels: WAPP power levels are between 1.642 and 4.297 (still bad) 2009-Jul-30 01:55:01 INFO5 check_wapp_levels: WAPP power levels are between 1.642 and 4.295 (still bad) 2009-Jul-30 01:55:03 INFO5 check_wapp_levels: WAPP power levels are between 1.641 and 4.294 (still bad) 2009-Jul-30 01:55:05 INFO5 check_wapp_levels: WAPP power levels are between 1.642 and 4.295 (still bad) 2009-Jul-30 01:55:07 INFO5 check_wapp_levels: WAPP power levels are between 1.641 and 4.292 (still bad) 2009-Jul-30 01:55:09 INFO5 check_wapp_levels: WAPP power levels are between 1.640 and 4.293 (still bad) 2009-Jul-30 01:55:11 INFO5 check_wapp_levels: WAPP power levels are between 1.640 and 4.292 (still bad) 2009-Jul-30 01:55:13 INFO5 check_wapp_levels: WAPP power levels are between 1.639 and 4.290 (still bad) 2009-Jul-30 01:55:15 INFO5 check_wapp_levels: WAPP power levels are between 1.639 and 4.290 (still bad) 2009-Jul-30 01:55:17 INFO5 check_wapp_levels: WAPP power levels are between 1.638 and 4.284 (still bad) 2009-Jul-30 01:55:19 INFO5 check_wapp_levels: WAPP power levels are between 1.638 and 4.288 (still bad) 2009-Jul-30 01:55:21 INFO5 check_wapp_levels: WAPP power levels are between 1.638 and 4.287 (still bad) 2009-Jul-30 01:55:23 INFO5 check_wapp_levels: WAPP power levels are between 1.638 and 4.286 (still bad) 2009-Jul-30 01:55:25 INFO5 check_wapp_levels: WAPP power levels are between 1.638 and 4.286 (still bad) 2009-Jul-30 01:55:27 INFO5 check_wapp_levels: WAPP power levels are between 1.637 and 4.285 (still bad) 2009-Jul-30 01:55:29 INFO5 check_wapp_levels: WAPP power levels are between 1.637 and 4.284 (still bad) 2009-Jul-30 01:55:32 INFO5 check_wapp_levels: WAPP power levels are between 1.637 and 4.284 (still bad) 2009-Jul-30 01:55:34 INFO5 check_wapp_levels: WAPP power levels are between 1.636 and 4.286 (still bad) 2009-Jul-30 01:55:36 INFO5 check_wapp_levels: WAPP power levels are between 1.636 and 4.282 (still bad) 2009-Jul-30 01:55:38 INFO5 check_wapp_levels: WAPP power levels are between 1.635 and 4.280 (still bad) 2009-Jul-30 01:55:40 INFO5 check_wapp_levels: WAPP power levels are between 1.636 and 4.281 (still bad) 2009-Jul-30 01:55:42 INFO5 check_wapp_levels: WAPP power levels are between 1.636 and 4.279 (still bad) 2009-Jul-30 01:55:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (4.282 > 2.0)! 2009-Jul-30 01:55:44 LOG4 check_wapp_levels: WAPP-1 power levels: 2.065 0.000 0.000 0.000 2009-Jul-30 01:55:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 1.636 0.000 0.000 2009-Jul-30 01:55:44 LOG4 check_wapp_levels: WAPP-3 power levels: 4.214 0.000 0.000 0.000 2009-Jul-30 01:55:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 4.282 0.000 0.000 2009-Jul-30 01:55:46 INFO5 check_wapp_levels: WAPP power levels are between 1.636 and 4.280 (still bad) 2009-Jul-30 01:55:48 INFO5 check_wapp_levels: WAPP power levels are between 1.634 and 4.278 (still bad) 2009-Jul-30 01:55:50 INFO5 check_wapp_levels: WAPP power levels are between 1.635 and 4.278 (still bad) 2009-Jul-30 01:55:52 INFO5 check_wapp_levels: WAPP power levels are between 1.634 and 4.279 (still bad) 2009-Jul-30 01:55:54 INFO5 check_wapp_levels: WAPP power levels are between 1.634 and 4.274 (still bad) 2009-Jul-30 01:55:56 INFO5 check_wapp_levels: WAPP power levels are between 1.635 and 4.279 (still bad) 2009-Jul-30 01:55:58 INFO5 check_wapp_levels: WAPP power levels are between 1.634 and 4.274 (still bad) 2009-Jul-30 01:56:00 INFO5 check_wapp_levels: WAPP power levels are between 1.634 and 4.273 (still bad) 2009-Jul-30 01:56:02 INFO5 check_wapp_levels: WAPP power levels are between 1.633 and 4.274 (still bad) 2009-Jul-30 01:56:04 INFO5 check_wapp_levels: WAPP power levels are between 1.632 and 4.273 (still bad) 2009-Jul-30 01:56:06 INFO5 check_wapp_levels: WAPP power levels are between 1.632 and 4.271 (still bad) 2009-Jul-30 01:56:08 INFO5 check_wapp_levels: WAPP power levels are between 1.632 and 4.271 (still bad) 2009-Jul-30 01:56:10 INFO5 check_wapp_levels: WAPP power levels are between 1.632 and 4.271 (still bad) 2009-Jul-30 01:56:12 INFO5 check_wapp_levels: WAPP power levels are between 1.631 and 4.266 (still bad) 2009-Jul-30 01:56:14 INFO5 check_wapp_levels: WAPP power levels are between 1.631 and 4.267 (still bad) 2009-Jul-30 01:56:16 INFO5 check_wapp_levels: WAPP power levels are between 1.631 and 4.268 (still bad) 2009-Jul-30 01:56:18 INFO5 check_wapp_levels: WAPP power levels are between 1.631 and 4.267 (still bad) 2009-Jul-30 01:56:20 INFO5 check_wapp_levels: WAPP power levels are between 1.630 and 4.267 (still bad) 2009-Jul-30 01:56:22 INFO5 check_wapp_levels: WAPP power levels are between 1.629 and 4.260 (still bad) 2009-Jul-30 01:56:24 INFO5 check_wapp_levels: WAPP power levels are between 1.629 and 4.263 (still bad) 2009-Jul-30 01:56:26 INFO5 check_wapp_levels: WAPP power levels are between 1.630 and 4.264 (still bad) 2009-Jul-30 01:56:28 INFO5 check_wapp_levels: WAPP power levels are between 1.629 and 4.263 (still bad) 2009-Jul-30 01:56:30 INFO5 check_wapp_levels: WAPP power levels are between 1.629 and 4.263 (still bad) 2009-Jul-30 01:56:32 INFO5 check_wapp_levels: WAPP power levels are between 1.629 and 4.262 (still bad) 2009-Jul-30 01:56:34 INFO5 check_wapp_levels: WAPP power levels are between 1.628 and 4.260 (still bad) 2009-Jul-30 01:56:36 INFO5 check_wapp_levels: WAPP power levels are between 1.629 and 4.261 (still bad) 2009-Jul-30 01:56:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 01:56:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jul-30 01:56:38 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2009-Jul-30 01:56:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jul-30 01:56:38 LOG5 end_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2009-Jul-30 01:56:38 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2009-Jul-30 01:56:38 START begin_task: Starting task 'WAPP calibration' 2009-Jul-30 01:56:38 LOG5 begin_task: Level: (2) ID = <10048> Status = 0 0 0 0 ok 2009-Jul-30 01:56:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Jul-30 01:56:38 START begin_task: Starting task 'selecting calibration type' 2009-Jul-30 01:56:38 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2009-Jul-30 01:56:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jul-30 01:56:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jul-30 01:56:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 01:56:38 START begin_task: Starting task 'waiting on setcal' 2009-Jul-30 01:56:38 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2009-Jul-30 01:56:38 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jul-30 01:56:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 01:56:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:56:38 INFO5 check_wapp_levels: WAPP power levels are between 1.629 and 4.261 (still bad) 2009-Jul-30 01:56:38 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-30 01:56:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jul-30 01:56:38 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2009-Jul-30 01:56:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jul-30 01:56:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jul-30 01:56:38 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2009-Jul-30 01:56:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Jul-30 01:56:38 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jul-30 01:56:38 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jul-30 01:56:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-30 01:56:38 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2009-Jul-30 01:56:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 01:56:38 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-30 01:56:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jul-30 01:56:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-30 01:56:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-30 01:56:38 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2009-Jul-30 01:56:39 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-Jul-30 01:56:39 LOG4 take_data: Calling 'take_data 10 10 CAL ON -' 2009-Jul-30 01:56:39 START begin_task: Starting task 'WAPP spectral observation' 2009-Jul-30 01:56:39 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Jul-30 01:56:39 INFO2 take_data: Starting WAPP scan: 921100009 2009-Jul-30 01:56:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 01:56:39 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jul-30 01:56:39 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Jul-30 01:56:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 01:56:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21400.00 2009-Jul-30 01:56:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 2160.851641 MHz --- rfnum = 5 ifnum = 2 inpfrq = 2 2009-Jul-30 01:56:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1410.851641 MHz Flip = 0 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 01:56:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1410.851641 MHz Flip = 0 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 01:56:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1410.851641 MHz Flip = 0 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 01:56:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1410.851641 MHz Flip = 0 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 01:56:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 01:56:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jul-30 01:56:50 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Jul-30 01:56:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jul-30 01:56:50 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Jul-30 01:56:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Jul-30 01:56:50 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jul-30 01:56:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jul-30 01:56:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-30 01:56:50 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Jul-30 01:56:50 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-30 01:56:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-30 01:56:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-30 01:56:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-30 01:56:50 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Jul-30 01:56:50 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-Jul-30 01:56:50 LOG4 take_data: Calling 'take_data 10 10 CAL OFF -' 2009-Jul-30 01:56:50 START begin_task: Starting task 'WAPP spectral observation' 2009-Jul-30 01:56:50 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2009-Jul-30 01:56:50 INFO2 take_data: Starting WAPP scan: 921100010 2009-Jul-30 01:56:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 01:56:51 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jul-30 01:56:51 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2009-Jul-30 01:56:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 01:56:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (4.261 > 2.0)! 2009-Jul-30 01:56:51 LOG4 check_wapp_levels: WAPP-1 power levels: 2.576 0.000 0.000 0.000 2009-Jul-30 01:56:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.000 1.629 0.000 0.000 2009-Jul-30 01:56:51 LOG4 check_wapp_levels: WAPP-3 power levels: 4.199 0.000 0.000 0.000 2009-Jul-30 01:56:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.000 4.261 0.000 0.000 2009-Jul-30 01:56:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21412.00 2009-Jul-30 01:57:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 2160.851641 MHz --- rfnum = 5 ifnum = 2 inpfrq = 2 2009-Jul-30 01:57:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1410.851641 MHz Flip = 0 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 01:57:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1410.851641 MHz Flip = 0 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 01:57:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1410.851641 MHz Flip = 0 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 01:57:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1410.851641 MHz Flip = 0 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 01:57:02 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-Jul-30 01:57:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 01:57:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jul-30 01:57:02 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2009-Jul-30 01:57:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jul-30 01:57:02 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2009-Jul-30 01:57:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jul-30 01:57:02 STOP finish_task: Finishing task 'WAPP calibration' 2009-Jul-30 01:57:02 LOG5 finish_task: Level: (2) ID = <10048> Status = 0 0 0 0 ok 2009-Jul-30 01:57:02 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Jul-30 01:57:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 01:57:02 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Jul-30 01:57:02 LOG5 end_task: Level: (2) ID = <10048> Status = 0 0 0 0 ok 2009-Jul-30 01:57:02 START begin_task: Starting task 'clearing telescope offsets' 2009-Jul-30 01:57:02 LOG5 begin_task: Level: (2) ID = <10057> Status = 0 0 0 0 ok 2009-Jul-30 01:57:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2009-Jul-30 01:57:02 INFO3 clear_offsets: Removing telescope offsets 2009-Jul-30 01:57:02 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J230054+161059" 2009-Jul-30 01:57:02 LOG3 vw_send: To DATATAKING: pnt tr 230054.000000 161059.000000 -CJ 2009-Jul-30 01:57:02 STOP finish_task: Finishing task 'clearing telescope offsets' 2009-Jul-30 01:57:02 LOG5 finish_task: Level: (2) ID = <10057> Status = 0 0 0 0 ok 2009-Jul-30 01:57:02 INFO2 finish_task: DONE finished clearing: telescope offsets 2009-Jul-30 01:57:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 01:57:02 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2009-Jul-30 01:57:02 LOG5 end_task: Level: (2) ID = <10057> Status = 0 0 0 0 ok 2009-Jul-30 01:57:02 STOP finish_task: Finishing task 'standard on/off' 2009-Jul-30 01:57:02 LOG5 finish_task: Level: (1) ID = <10027> Status = 0 0 0 0 ok 2009-Jul-30 01:57:02 DONE finish_task: DONE finished pattern: standard on/off 2009-Jul-30 01:57:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 01:57:02 END end_task: Finishing task 'standard on/off' with status 'OK' 2009-Jul-30 01:57:02 LOG5 end_task: Level: (1) ID = <10027> Status = 0 0 0 0 ok 2009-Jul-30 01:57:02 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J230054+161059" 2009-Jul-30 01:57:02 INFO5 check_wapp_levels: WAPP power levels are between 2.157 and 5.661 (still bad) 2009-Jul-30 01:57:02 LOG4 got_cormsg: From DATATAKING: pnt tr 230054.000000 161059.000000 -CJ 2009-Jul-30 01:57:02 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jul-30 02:00:22 NOTE CIMA-load_config_file: Loading and applying configuration file 'togs_ages.conf' 2009-Jul-30 02:00:23 ALERT CIMA-new_receiver: A change between ALFA and another receiver requires a reconfiguration of the WAPPs! 2009-Jul-30 02:00:23 INFO4 CIMA-antvel: Computed apparent RA = 23:01:24.4 Dec = +16:14:10.9 from RA = 23:00:54.0 Dec = +16:10:59.0 Epoch = 2009.57792 J 2009-Jul-30 02:00:23 INFO4 CIMA-antvel: Parameters to Doppler: Heliocentric 21622.0 2009 211 0 2009-Jul-30 02:00:23 INFO3 CIMA-antvel: Computed velocity correction -19.6783623354 2009-Jul-30 02:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Jul-30 02:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Jul-30 02:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Jul-30 02:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Jul-30 02:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Jul-30 02:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Jul-30 02:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Jul-30 02:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2009-Jul-30 02:00:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1621.909463" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Jul-30 02:00:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Jul-30 02:00:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Jul-30 02:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jul-30 02:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jul-30 02:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jul-30 02:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jul-30 02:00:25 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Jul-30 02:00:25 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Jul-30 02:00:25 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Jul-30 02:00:25 LOG5 begin_task: Level: (1) ID = <10058> Status = 0 0 0 0 ok 2009-Jul-30 02:00:25 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Jul-30 02:00:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Jul-30 02:00:25 INFO1 config_iflo: Selecting receiver ALFA 2009-Jul-30 02:00:25 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Jul-30 02:00:25 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-Jul-30 02:00:25 START begin_task: Starting task 'selecting receiver ALFA' 2009-Jul-30 02:00:25 LOG5 begin_task: Level: (2) ID = <10059> Status = 0 0 0 0 ok 2009-Jul-30 02:00:25 NOTE select_receiver: Starting to select receiver ALFA 2009-Jul-30 02:00:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Jul-30 02:00:25 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2009-Jul-30 02:00:25 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Jul-30 02:00:25 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Jul-30 02:00:25 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Jul-30 02:00:25 LOG5 finish_task: Level: (2) ID = <10059> Status = 0 0 0 0 ok 2009-Jul-30 02:00:25 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Jul-30 02:00:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 02:00:25 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Jul-30 02:00:25 LOG5 end_task: Level: (2) ID = <10059> Status = 0 0 0 0 ok 2009-Jul-30 02:00:25 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Jul-30 02:00:25 LOG5 begin_task: Level: (2) ID = <10060> Status = 0 0 0 0 ok 2009-Jul-30 02:00:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 131.4 BITMAP stat_alfa_rot INFO {Waiting on rotating floor} 2009-Jul-30 02:00:25 START begin_task: Starting task 'waiting on waiting for receiver rotation' 2009-Jul-30 02:00:25 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Jul-30 02:00:25 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2009-Jul-30 02:00:25 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Jul-30 02:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Jul-30 02:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Jul-30 02:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Jul-30 02:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Jul-30 02:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Jul-30 02:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Jul-30 02:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Jul-30 02:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Jul-30 02:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jul-30 02:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jul-30 02:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jul-30 02:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jul-30 02:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Jul-30 02:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Jul-30 02:00:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Jul-30 02:00:25 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Jul-30 02:00:25 ERROR exec_msg: ERROR Executive is busy with task: 'waiting on waiting for receiver rotation'! 2009-Jul-30 02:00:25 ERROR exec_msg: ERROR rejecting new command! 2009-Jul-30 02:00:25 ALERT exec_msg: Send the command again once the executive is idle! 2009-Jul-30 02:00:26 LOG1 exec_msg: Executive busy - skipped 'config_wapp_correlator' 2009-Jul-30 02:00:32 LOG4 got_cormsg: From DATATAKING: waiting for turret position:26.64 2009-Jul-30 02:02:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:02:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:02:37 STOP end_task: Finishing task 'waiting on waiting for receiver rotation' with status 'OK' 2009-Jul-30 02:02:37 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Jul-30 02:02:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT 2009-Jul-30 02:02:37 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Jul-30 02:02:37 LOG5 end_task: Level: (2) ID = <10060> Status = 0 0 0 0 ok 2009-Jul-30 02:02:37 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Jul-30 02:02:37 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Jul-30 02:02:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-30 02:02:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jul-30 02:02:37 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-30 02:02:37 LOG5 begin_task: Level: (2) ID = <10062> Status = 0 0 0 0 ok 2009-Jul-30 02:02:37 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-30 02:02:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-30 02:02:37 LOG5 end_task: Level: (2) ID = <10062> Status = 0 0 0 0 ok 2009-Jul-30 02:02:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-30 02:02:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jul-30 02:02:37 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Jul-30 02:02:37 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Jul-30 02:02:37 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Jul-30 02:02:37 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Jul-30 02:02:37 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Jul-30 02:02:37 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Jul-30 02:02:37 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Jul-30 02:02:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1621909463.0} 2009-Jul-30 02:02:37 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Jul-30 02:02:37 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Jul-30 02:02:37 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Jul-30 02:02:37 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Jul-30 02:02:37 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Jul-30 02:02:37 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Jul-30 02:02:37 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Jul-30 02:02:37 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Jul-30 02:02:37 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Jul-30 02:02:37 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Jul-30 02:02:37 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Jul-30 02:02:37 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Jul-30 02:02:37 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Jul-30 02:02:37 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Jul-30 02:02:37 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Jul-30 02:02:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:02:37 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Jul-30 02:02:37 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Jul-30 02:02:37 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Jul-30 02:02:37 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Jul-30 02:02:37 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Jul-30 02:02:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Jul-30 02:02:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:02:37 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Jul-30 02:02:37 LOG5 begin_task: Level: (2) ID = <10063> Status = 0 0 0 0 ok 2009-Jul-30 02:02:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Jul-30 02:02:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1621909463.0} 2009-Jul-30 02:02:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Jul-30 02:02:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:02:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:02:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:02:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:02:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:02:39 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Jul-30 02:02:39 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Jul-30 02:02:39 LOG5 end_task: Level: (2) ID = <10063> Status = 0 0 0 0 ok 2009-Jul-30 02:02:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Jul-30 02:02:39 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Jul-30 02:02:39 LOG5 finish_task: Level: (1) ID = <10058> Status = 0 0 0 0 ok 2009-Jul-30 02:02:39 DONE finish_task: DONE finished configuration: IF/LO path 2009-Jul-30 02:02:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 02:02:39 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Jul-30 02:02:39 LOG5 end_task: Level: (1) ID = <10058> Status = 0 0 0 0 ok 2009-Jul-30 02:02:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:02:59 NOTE CIMA-load_config_file: Configuration file 'togs_ages.conf' applied. 2009-Jul-30 02:03:04 INFO4 CIMA-antvel: Computed apparent RA = 23:04:03.7 Dec = +16:20:20.5 from RA = 23:03:33.2 Dec = +16:17:08.1 Epoch = 2009.57792 J 2009-Jul-30 02:03:04 INFO4 CIMA-antvel: Parameters to Doppler: Heliocentric 21783.0 2009 211 0 2009-Jul-30 02:03:04 INFO3 CIMA-antvel: Computed velocity correction -19.9215250206 2009-Jul-30 02:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Jul-30 02:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Jul-30 02:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Jul-30 02:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Jul-30 02:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Jul-30 02:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Jul-30 02:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Jul-30 02:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2009-Jul-30 02:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2009-Jul-30 02:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2009-Jul-30 02:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2009-Jul-30 02:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2009-Jul-30 02:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2009-Jul-30 02:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2009-Jul-30 02:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2009-Jul-30 02:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2009-Jul-30 02:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Jul-30 02:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Jul-30 02:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Jul-30 02:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Jul-30 02:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Jul-30 02:03:04 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1621.910576" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jul-30 02:03:05 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Jul-30 02:03:05 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Jul-30 02:03:05 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Jul-30 02:03:05 LOG5 begin_task: Level: (1) ID = <10064> Status = 0 0 0 0 ok 2009-Jul-30 02:03:05 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Jul-30 02:03:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Jul-30 02:03:05 LOG1 config_iflo: Receiver ALFA already selected 2009-Jul-30 02:03:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-30 02:03:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jul-30 02:03:06 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-30 02:03:06 LOG5 begin_task: Level: (2) ID = <10065> Status = 0 0 0 0 ok 2009-Jul-30 02:03:06 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-30 02:03:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-30 02:03:06 LOG5 end_task: Level: (2) ID = <10065> Status = 0 0 0 0 ok 2009-Jul-30 02:03:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-30 02:03:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jul-30 02:03:06 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Jul-30 02:03:06 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Jul-30 02:03:06 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Jul-30 02:03:06 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Jul-30 02:03:06 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Jul-30 02:03:06 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Jul-30 02:03:06 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Jul-30 02:03:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1621910576.0} 2009-Jul-30 02:03:06 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Jul-30 02:03:06 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Jul-30 02:03:06 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Jul-30 02:03:06 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Jul-30 02:03:06 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Jul-30 02:03:06 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Jul-30 02:03:06 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Jul-30 02:03:06 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Jul-30 02:03:06 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Jul-30 02:03:06 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Jul-30 02:03:06 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Jul-30 02:03:06 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2009-Jul-30 02:03:06 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Jul-30 02:03:06 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Jul-30 02:03:06 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Jul-30 02:03:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:03:06 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Jul-30 02:03:06 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Jul-30 02:03:06 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Jul-30 02:03:06 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Jul-30 02:03:06 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Jul-30 02:03:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Jul-30 02:03:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:03:06 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Jul-30 02:03:06 LOG5 begin_task: Level: (2) ID = <10066> Status = 0 0 0 0 ok 2009-Jul-30 02:03:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1621910576.0} 2009-Jul-30 02:03:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:03:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:03:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:03:06 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Jul-30 02:03:06 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Jul-30 02:03:06 LOG5 end_task: Level: (2) ID = <10066> Status = 0 0 0 0 ok 2009-Jul-30 02:03:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Jul-30 02:03:06 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Jul-30 02:03:06 LOG5 finish_task: Level: (1) ID = <10064> Status = 0 0 0 0 ok 2009-Jul-30 02:03:06 DONE finish_task: DONE finished configuration: IF/LO path 2009-Jul-30 02:03:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 02:03:06 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Jul-30 02:03:06 LOG5 end_task: Level: (1) ID = <10064> Status = 0 0 0 0 ok 2009-Jul-30 02:03:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:03:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Jul-30 02:03:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Jul-30 02:03:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Jul-30 02:03:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Jul-30 02:03:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Jul-30 02:03:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Jul-30 02:03:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Jul-30 02:03:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Jul-30 02:03:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jul-30 02:03:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jul-30 02:03:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jul-30 02:03:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jul-30 02:03:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Jul-30 02:03:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Jul-30 02:03:08 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Jul-30 02:03:09 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Jul-30 02:03:09 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Jul-30 02:03:09 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Jul-30 02:03:09 LOG5 begin_task: Level: (1) ID = <10067> Status = 0 0 0 0 ok 2009-Jul-30 02:03:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Jul-30 02:03:09 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Jul-30 02:03:09 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Jul-30 02:03:09 START begin_task: Starting task 'selecting calibration port' 2009-Jul-30 02:03:09 LOG5 begin_task: Level: (2) ID = <10068> Status = 0 0 0 0 ok 2009-Jul-30 02:03:09 LOG3 vw_send: To DATATAKING: calport 3 2009-Jul-30 02:03:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Jul-30 02:03:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:03:09 START begin_task: Starting task 'waiting on calport' 2009-Jul-30 02:03:09 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Jul-30 02:03:09 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Jul-30 02:03:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:03:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:03:09 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-30 02:03:09 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Jul-30 02:03:09 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Jul-30 02:03:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Jul-30 02:03:09 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Jul-30 02:03:09 LOG5 end_task: Level: (2) ID = <10068> Status = 0 0 0 0 ok 2009-Jul-30 02:03:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jul-30 02:03:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jul-30 02:03:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-30 02:03:09 LOG5 begin_task: Level: (2) ID = <10070> Status = 0 0 0 0 ok 2009-Jul-30 02:03:09 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-30 02:03:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:03:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-30 02:03:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-30 02:03:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-30 02:03:09 LOG5 end_task: Level: (2) ID = <10070> Status = 0 0 0 0 ok 2009-Jul-30 02:03:09 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Jul-30 02:03:09 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Jul-30 02:03:09 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Jul-30 02:03:09 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Jul-30 02:03:09 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Jul-30 02:03:09 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Jul-30 02:03:09 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Jul-30 02:03:09 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Jul-30 02:03:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2009-Jul-30 02:03:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2009-Jul-30 02:03:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2009-Jul-30 02:03:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2009-Jul-30 02:03:09 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Jul-30 02:03:09 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Jul-30 02:03:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-30 02:03:09 LOG5 begin_task: Level: (2) ID = <10071> Status = 0 0 0 0 ok 2009-Jul-30 02:03:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Jul-30 02:03:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Jul-30 02:03:10 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-30 02:03:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Jul-30 02:03:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-30 02:03:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-30 02:03:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-30 02:03:10 LOG5 end_task: Level: (2) ID = <10071> Status = 0 0 0 0 ok 2009-Jul-30 02:03:10 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Jul-30 02:03:10 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Jul-30 02:03:10 LOG5 finish_task: Level: (1) ID = <10067> Status = 0 0 0 0 ok 2009-Jul-30 02:03:10 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Jul-30 02:03:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 02:03:10 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Jul-30 02:03:10 LOG5 end_task: Level: (1) ID = <10067> Status = 0 0 0 0 ok 2009-Jul-30 02:03:10 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Jul-30 02:03:56 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 02:03:56.311 (seconds: 7436.311)!} 2009-Jul-30 02:03:56 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 02:03:56.311 (seconds: 7436.311)! 2009-Jul-30 02:04:35 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc.cmd ' to executive ... 2009-Jul-30 02:04:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_ages.conf} 2009-Jul-30 02:04:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2009-Jul-30 02:04:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2009-Jul-30 02:04:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2009-Jul-30 02:04:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2009-Jul-30 02:04:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2009-Jul-30 02:04:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2009-Jul-30 02:04:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2009-Jul-30 02:04:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2009-Jul-30 02:04:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2009-Jul-30 02:04:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2009-Jul-30 02:04:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2009-Jul-30 02:04:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2009-Jul-30 02:04:36 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Jul-30 02:04:36 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 13 2009-Jul-30 02:04:36 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 13' 2009-Jul-30 02:04:36 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2009-Jul-30 02:04:36 LOG5 begin_task: Level: (1) ID = <10072> Status = 0 0 0 0 ok 2009-Jul-30 02:04:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2009-Jul-30 02:04:36 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2009-Jul-30 02:04:36 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2009-Jul-30 02:04:36 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Jul-30 02:04:36 NOTE CIMA-check_config_file: File 'togs_ages.conf' contains a observing mode set-up which will be ignored! 2009-Jul-30 02:04:36 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-30 02:04:36 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Jul-30 02:04:36 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2009-Jul-30 02:04:37 INFO4 CIMA-antvel: Computed apparent RA = 23:05:36.9 Dec = +16:20:20.5 from RA = 23:05:06.5 Dec = +16:17:07.7 Epoch = 2009.57792 J 2009-Jul-30 02:04:37 INFO4 CIMA-antvel: Parameters to Doppler: Heliocentric 21876.0 2009 211 0 2009-Jul-30 02:04:37 INFO3 CIMA-antvel: Computed velocity correction -20.0610923790 2009-Jul-30 02:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Jul-30 02:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Jul-30 02:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Jul-30 02:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Jul-30 02:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Jul-30 02:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Jul-30 02:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Jul-30 02:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2009-Jul-30 02:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2009-Jul-30 02:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2009-Jul-30 02:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2009-Jul-30 02:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2009-Jul-30 02:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2009-Jul-30 02:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2009-Jul-30 02:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2009-Jul-30 02:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2009-Jul-30 02:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Jul-30 02:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Jul-30 02:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Jul-30 02:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Jul-30 02:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Jul-30 02:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Jul-30 02:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Jul-30 02:04:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1621.911215" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Jul-30 02:04:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Jul-30 02:04:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Jul-30 02:04:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Jul-30 02:04:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Jul-30 02:04:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Jul-30 02:04:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Jul-30 02:04:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jul-30 02:04:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jul-30 02:04:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jul-30 02:04:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jul-30 02:04:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Jul-30 02:04:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Jul-30 02:04:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Jul-30 02:04:39 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-30 02:04:39 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Jul-30 02:04:39 LOG5 begin_task: Level: (2) ID = <10073> Status = 0 0 0 0 ok 2009-Jul-30 02:04:39 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Jul-30 02:04:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Jul-30 02:04:39 LOG1 config_iflo: Receiver ALFA already selected 2009-Jul-30 02:04:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-30 02:04:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jul-30 02:04:39 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-30 02:04:39 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2009-Jul-30 02:04:39 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-30 02:04:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-30 02:04:39 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2009-Jul-30 02:04:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-30 02:04:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jul-30 02:04:39 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Jul-30 02:04:39 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Jul-30 02:04:39 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Jul-30 02:04:39 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Jul-30 02:04:39 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Jul-30 02:04:39 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Jul-30 02:04:39 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Jul-30 02:04:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1621911215.0} 2009-Jul-30 02:04:39 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Jul-30 02:04:39 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Jul-30 02:04:39 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Jul-30 02:04:39 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Jul-30 02:04:39 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Jul-30 02:04:39 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Jul-30 02:04:39 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Jul-30 02:04:39 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Jul-30 02:04:39 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Jul-30 02:04:39 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Jul-30 02:04:39 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Jul-30 02:04:39 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2009-Jul-30 02:04:39 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Jul-30 02:04:39 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Jul-30 02:04:39 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Jul-30 02:04:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:04:39 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Jul-30 02:04:39 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Jul-30 02:04:39 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Jul-30 02:04:39 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Jul-30 02:04:39 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Jul-30 02:04:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Jul-30 02:04:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:04:39 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Jul-30 02:04:39 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Jul-30 02:04:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1621911215.0} 2009-Jul-30 02:04:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:04:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:04:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:04:39 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Jul-30 02:04:39 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Jul-30 02:04:39 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Jul-30 02:04:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Jul-30 02:04:39 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Jul-30 02:04:39 LOG5 finish_task: Level: (2) ID = <10073> Status = 0 0 0 0 ok 2009-Jul-30 02:04:39 DONE finish_task: DONE finished configuration: IF/LO path 2009-Jul-30 02:04:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 02:04:39 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Jul-30 02:04:39 LOG5 end_task: Level: (2) ID = <10073> Status = 0 0 0 0 ok 2009-Jul-30 02:04:39 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Jul-30 02:04:39 LOG5 begin_task: Level: (2) ID = <10076> Status = 0 0 0 0 ok 2009-Jul-30 02:04:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Jul-30 02:04:39 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Jul-30 02:04:39 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Jul-30 02:04:39 START begin_task: Starting task 'selecting calibration port' 2009-Jul-30 02:04:39 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2009-Jul-30 02:04:39 LOG3 vw_send: To DATATAKING: calport 3 2009-Jul-30 02:04:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Jul-30 02:04:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:04:39 START begin_task: Starting task 'waiting on calport' 2009-Jul-30 02:04:39 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2009-Jul-30 02:04:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:04:40 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Jul-30 02:04:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:04:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:04:40 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-30 02:04:40 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Jul-30 02:04:40 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2009-Jul-30 02:04:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Jul-30 02:04:40 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Jul-30 02:04:40 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2009-Jul-30 02:04:40 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jul-30 02:04:40 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jul-30 02:04:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-30 02:04:40 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2009-Jul-30 02:04:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:04:40 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-30 02:04:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-30 02:04:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-30 02:04:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-30 02:04:40 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2009-Jul-30 02:04:40 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Jul-30 02:04:40 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Jul-30 02:04:40 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Jul-30 02:04:40 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Jul-30 02:04:40 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Jul-30 02:04:40 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Jul-30 02:04:40 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Jul-30 02:04:40 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Jul-30 02:04:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2009-Jul-30 02:04:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2009-Jul-30 02:04:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2009-Jul-30 02:04:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2009-Jul-30 02:04:40 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Jul-30 02:04:40 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Jul-30 02:04:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-30 02:04:40 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Jul-30 02:04:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Jul-30 02:04:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Jul-30 02:04:40 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-30 02:04:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Jul-30 02:04:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-30 02:04:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-30 02:04:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-30 02:04:40 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Jul-30 02:04:40 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Jul-30 02:04:40 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Jul-30 02:04:40 LOG5 finish_task: Level: (2) ID = <10076> Status = 0 0 0 0 ok 2009-Jul-30 02:04:40 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Jul-30 02:04:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 02:04:40 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Jul-30 02:04:40 LOG5 end_task: Level: (2) ID = <10076> Status = 0 0 0 0 ok 2009-Jul-30 02:04:40 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2009-Jul-30 02:04:40 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2009-Jul-30 02:04:41 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2009-Jul-30 02:04:41 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2009-Jul-30 02:04:41 INFO5 is_if_valid: Condition parsed as: 1 2009-Jul-30 02:04:41 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2009-Jul-30 02:04:41 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2009-Jul-30 02:04:41 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Jul-30 02:04:41 LOG5 begin_task: Level: (2) ID = <10081> Status = 0 0 0 0 ok 2009-Jul-30 02:04:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Jul-30 02:04:41 LOG3 track_source: Calling 'track_source galfasrc 224000 +155900 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2009-Jul-30 02:04:41 START begin_task: Starting task 'sending tracking commands' 2009-Jul-30 02:04:41 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Jul-30 02:04:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Jul-30 02:04:41 INFO1 track_source: Starting to track galfasrc 2009-Jul-30 02:04:41 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Jul-30 02:04:41 LOG3 vw_send: To DATATAKING: set ra 224000 2009-Jul-30 02:04:41 LOG3 vw_send: To DATATAKING: set dec +155900 2009-Jul-30 02:04:41 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-30 02:04:41 LOG3 vw_send: To DATATAKING: pnt tr 224000 +155900 -CJ 2009-Jul-30 02:04:41 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Jul-30 02:04:41 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-30 02:04:41 LOG5 finish_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Jul-30 02:04:41 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jul-30 02:04:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 02:04:41 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jul-30 02:04:41 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Jul-30 02:04:41 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Jul-30 02:04:41 LOG5 finish_task: Level: (2) ID = <10081> Status = 0 0 0 0 ok 2009-Jul-30 02:04:41 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Jul-30 02:04:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 02:04:41 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Jul-30 02:04:41 LOG5 end_task: Level: (2) ID = <10081> Status = 0 0 0 0 ok 2009-Jul-30 02:04:41 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2009-Jul-30 02:04:41 INFO1 run_command_line: Skipping line 'ELSEIF isup(galfasrc2) then' since an earlier condition already has been true 2009-Jul-30 02:04:41 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2009-Jul-30 02:04:41 INFO1 run_command_line: Skipping line 'GOTO galfasrc2' in non-true conditional branch 2009-Jul-30 02:04:41 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2009-Jul-30 02:04:41 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2009-Jul-30 02:04:41 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2009-Jul-30 02:04:41 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2009-Jul-30 02:04:41 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2009-Jul-30 02:04:41 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2009-Jul-30 02:04:41 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2009-Jul-30 02:04:42 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2009-Jul-30 02:04:42 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Jul-30 02:04:42 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Jul-30 02:04:42 LOG5 begin_task: Level: (2) ID = <10083> Status = 0 0 0 0 ok 2009-Jul-30 02:04:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Jul-30 02:04:42 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Jul-30 02:04:42 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Jul-30 02:04:42 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Jul-30 02:04:42 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Jul-30 02:04:42 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Jul-30 02:04:42 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Jul-30 02:04:42 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Jul-30 02:04:42 LOG4 got_cormsg: From DATATAKING: set ra 224000 2009-Jul-30 02:04:42 LOG4 got_cormsg: From DATATAKING: set dec +155900 2009-Jul-30 02:04:42 LOG4 got_cormsg: From DATATAKING: vw% 224000 2009-Jul-30 02:04:42 LOG4 got_cormsg: From DATATAKING: vw% +155900 2009-Jul-30 02:04:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:04:42 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-30 02:04:42 LOG4 got_cormsg: From DATATAKING: pnt tr 224000 +155900 -CJ 2009-Jul-30 02:04:42 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Jul-30 02:04:42 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jul-30 02:04:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:05:00 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jul-30 02:05:00 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Jul-30 02:05:00 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Jul-30 02:05:00 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Jul-30 02:05:00 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jul-30 02:05:00 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Jul-30 02:05:00 LOG5 finish_task: Level: (2) ID = <10083> Status = 0 0 0 0 ok 2009-Jul-30 02:05:00 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Jul-30 02:05:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 02:05:00 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Jul-30 02:05:00 LOG5 end_task: Level: (2) ID = <10083> Status = 0 0 0 0 ok 2009-Jul-30 02:05:00 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2009-Jul-30 02:05:00 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Jul-30 02:05:00 LOG5 begin_task: Level: (2) ID = <10085> Status = 0 0 0 0 ok 2009-Jul-30 02:05:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jul-30 02:05:00 LOG3 waittrk: Start waittrk 5 2009-Jul-30 02:05:00 START begin_task: Starting task 'waiting on telescope movement' 2009-Jul-30 02:05:00 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Jul-30 02:05:05 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jul-30 02:05:05 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Jul-30 02:05:05 START begin_task: Starting task 'waiting on telescope on source' 2009-Jul-30 02:05:05 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2009-Jul-30 02:07:26 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jul-30 02:07:26 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2009-Jul-30 02:07:26 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jul-30 02:07:26 INFO2 waittrk: Now tracking galfasrc 2009-Jul-30 02:07:26 LOG4 waittrk: Current telescope position: Az = 287.55 ZA = 7.07 2009-Jul-30 02:07:26 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jul-30 02:07:26 LOG5 finish_task: Level: (2) ID = <10085> Status = 0 0 0 0 ok 2009-Jul-30 02:07:26 DONE finish_task: DONE finished waiting: telescope on source 2009-Jul-30 02:07:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 02:07:26 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jul-30 02:07:26 LOG5 end_task: Level: (2) ID = <10085> Status = 0 0 0 0 ok 2009-Jul-30 02:07:26 COMMAND run_command_line: EXECUTING command 20: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2009-Jul-30 02:07:26 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Jul-30 02:07:26 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-30 02:07:26 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2009-Jul-30 02:07:26 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Jul-30 02:07:26 LOG5 begin_task: Level: (2) ID = <10088> Status = 0 0 0 0 ok 2009-Jul-30 02:07:26 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Jul-30 02:07:26 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Jul-30 02:07:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Jul-30 02:07:26 START begin_task: Starting task 'selecting calibration type' 2009-Jul-30 02:07:26 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2009-Jul-30 02:07:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jul-30 02:07:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jul-30 02:07:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:07:26 START begin_task: Starting task 'waiting on setcal' 2009-Jul-30 02:07:26 LOG5 begin_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2009-Jul-30 02:07:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jul-30 02:07:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:07:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:07:26 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-30 02:07:26 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jul-30 02:07:26 LOG5 end_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2009-Jul-30 02:07:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jul-30 02:07:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-30 02:07:26 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jul-30 02:07:26 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-30 02:07:26 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2009-Jul-30 02:07:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:07:26 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-30 02:07:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-30 02:07:26 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2009-Jul-30 02:07:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-30 02:07:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jul-30 02:07:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-30 02:07:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jul-30 02:07:27 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-30 02:07:27 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2009-Jul-30 02:07:27 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-30 02:07:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-30 02:07:27 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2009-Jul-30 02:07:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-30 02:07:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jul-30 02:07:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jul-30 02:07:27 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2009-Jul-30 02:07:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2009-Jul-30 02:07:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2009-Jul-30 02:07:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2009-Jul-30 02:07:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2009-Jul-30 02:07:27 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Jul-30 02:07:27 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Jul-30 02:07:27 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Jul-30 02:07:27 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jul-30 02:07:27 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jul-30 02:07:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-30 02:07:27 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2009-Jul-30 02:07:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Jul-30 02:07:27 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-30 02:07:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-30 02:07:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-30 02:07:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-30 02:07:27 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2009-Jul-30 02:07:27 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Jul-30 02:07:27 START begin_task: Starting task 'adjusting WAPP power' 2009-Jul-30 02:07:27 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2009-Jul-30 02:07:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Jul-30 02:07:27 INFO2 adjust_power: Starting to adjust WAPP power 2009-Jul-30 02:07:27 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Jul-30 02:07:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Jul-30 02:07:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:07:27 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Jul-30 02:07:27 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2009-Jul-30 02:07:27 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Jul-30 02:07:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:07:27 NOTE WAPPDATA-new_file: New FITS file: wapp.20090730.a2048.0001.fits 2009-Jul-30 02:07:27 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090730.a2048.0001.fits} 2009-Jul-30 02:07:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:07:30 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-30 02:07:30 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Jul-30 02:07:30 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2009-Jul-30 02:07:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Jul-30 02:07:30 START begin_task: Starting task 'adjusting WAPP power' 2009-Jul-30 02:07:30 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2009-Jul-30 02:07:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Jul-30 02:07:30 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-30 02:07:30 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-30 02:07:30 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-30 02:07:30 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-30 02:07:30 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Jul-30 02:07:30 LOG5 begin_task: Level: (5) ID = <10097> Status = 0 0 0 0 ok 2009-Jul-30 02:07:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Jul-30 02:07:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:07:31 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 7 7 dB 2009-Jul-30 02:07:31 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 5 5 dB 2009-Jul-30 02:07:31 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2009-Jul-30 02:07:31 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Jul-30 02:07:31 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Jul-30 02:07:31 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Jul-30 02:07:31 LOG5 end_task: Level: (5) ID = <10097> Status = 0 0 0 0 ok 2009-Jul-30 02:07:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.099 0.969 ALFA beam 1: 0.936 0.945 2009-Jul-30 02:07:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.985 1.052 ALFA beam 3: 0.980 1.015 2009-Jul-30 02:07:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.949 1.105 ALFA beam 5: 0.952 0.939 2009-Jul-30 02:07:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.969 0.112 ALFA beam 7: 1.063 0.138 2009-Jul-30 02:07:31 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jul-30 02:07:31 LOG5 finish_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2009-Jul-30 02:07:31 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Jul-30 02:07:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 02:07:31 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jul-30 02:07:31 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2009-Jul-30 02:07:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jul-30 02:07:31 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jul-30 02:07:31 LOG5 finish_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2009-Jul-30 02:07:31 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Jul-30 02:07:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 02:07:31 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jul-30 02:07:31 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2009-Jul-30 02:07:31 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2009-Jul-30 02:07:31 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2009-Jul-30 02:07:31 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-Jul-30 02:07:31 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:07:31 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57793 J 2009-Jul-30 02:07:31 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:07:31 LOG2 antvel: Parameters to Doppler: Topocentric 22050 2009 211 0.0 2009-Jul-30 02:07:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:07:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-Jul-30 02:07:31 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-Jul-30 02:07:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:07:31 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:07:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Jul-30 02:07:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:07:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-30 02:07:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:07:31 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2009-Jul-30 02:07:31 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.209117 2009.5779289299567 18.999933 2009-Jul-30 02:07:31 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666668 15.983333333333336 2009-Jul-30 02:07:31 LOG4 log_alfabeam: ALFABEAM 1 22.659438788966014 16.003367220007100 2009-Jul-30 02:07:31 LOG4 log_alfabeam: ALFABEAM 2 22.662313449943230 15.914799823656576 2009-Jul-30 02:07:31 LOG4 log_alfabeam: ALFABEAM 3 22.669528217462350 15.893892953655794 2009-Jul-30 02:07:31 LOG4 log_alfabeam: ALFABEAM 4 22.673902655419873 15.963742909836595 2009-Jul-30 02:07:31 LOG4 log_alfabeam: ALFABEAM 5 22.670974644241166 16.053004859820710 2009-Jul-30 02:07:31 LOG4 log_alfabeam: ALFABEAM 6 22.663726292155260 16.071719852859037 2009-Jul-30 02:07:31 INFO2 take_data: Starting WAPP+GALFA scan: 921100011 2009-Jul-30 02:07:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:07:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:07:32 LOG5 begin_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2009-Jul-30 02:07:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:07:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Jul-30 02:07:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:07:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:07:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:07:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22053.00 2009-Jul-30 02:07:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:07:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:07:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:07:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:07:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:07:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:07:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:07:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:07:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:07:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Jul-30 02:07:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.107 0.969 0.936 0.945 2009-Jul-30 02:07:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.975 1.052 0.980 1.015 2009-Jul-30 02:07:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.963 1.105 0.952 0.939 2009-Jul-30 02:07:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.960 0.112 1.063 0.138 2009-Jul-30 02:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.107 (still bad) 2009-Jul-30 02:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.107 (still bad) 2009-Jul-30 02:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.107 (still bad) 2009-Jul-30 02:07:40 LOG4 exec_msg: From WAPPWATCH1: log_message ERROR {WAPP1-wapp_watch} {ERROR WAPP-program 'wapprt' has died!} 2009-Jul-30 02:07:40 ERROR WAPP1-wapp_watch: ERROR WAPP-program 'wapprt' has died! 2009-Jul-30 02:07:40 LOG4 exec_msg: From WAPPWATCH1: wapp_failure 1 2009-Jul-30 02:07:40 LOG5 wapp_failure: Calling 'wapp_failure 1' 2009-Jul-30 02:07:40 ERROR wapp_failure: ERROR WAPP-1 has failed! 2009-Jul-30 02:07:40 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 1 crash' 2009-Jul-30 02:07:40 START begin_task: Starting task 'handling WAPP failure' 2009-Jul-30 02:07:40 LOG5 begin_task: Level: (5) ID = <10100> Status = 0 0 0 0 ok 2009-Jul-30 02:07:41 NOTE handle_wapp_failure: Will abort task 'running command file 'command_galfasrc.cmd'' since the WAPP failure preference is set to 'abort'! 2009-Jul-30 02:07:41 ALERT handle_wapp_failure: Aborting due to WAPP failure! 2009-Jul-30 02:07:41 LOG1 task_failed: Task 'handling WAPP failure' failed! 2009-Jul-30 02:07:41 LOG5 task_failed: Level: (5) ID = <10100> Status = 0 0 0 0 ok 2009-Jul-30 02:07:41 WARNING abort_task: WARNING abort requested! 2009-Jul-30 02:07:41 WARNING abort_task: WARNING Aborting handling WAPP failure 2009-Jul-30 02:07:41 WARNING abort_task: WARNING Aborting wait for handling WAPP failure 2009-Jul-30 02:07:41 ALERT handle_wapp_failure: Restarting WAPP-1! 2009-Jul-30 02:07:41 NOTE handle_wapp_failure: Stand by for automatic WAPP-1 reconfiguration in 6 seconds! 2009-Jul-30 02:07:41 STOP end_task: Finishing task 'handling WAPP failure' with status 'FAILED' 2009-Jul-30 02:07:41 LOG5 end_task: Level: (5) ID = <10100> Status = 1 0 0 1 failed 2009-Jul-30 02:07:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'FAILED' 2009-Jul-30 02:07:41 LOG5 end_task: Level: (4) ID = <10099> Status = 1 0 0 1 failed 2009-Jul-30 02:07:41 START begin_task: Starting task 'stopping the WAPPs' 2009-Jul-30 02:07:41 LOG5 begin_task: Level: (4) ID = <10101> Status = 1 0 0 1 failed 2009-Jul-30 02:07:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2009-Jul-30 02:07:41 INFO1 stop_wapp: Stopping the WAPPs 2009-Jul-30 02:07:41 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2009-Jul-30 02:07:41 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2009-Jul-30 02:07:41 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2009-Jul-30 02:07:41 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2009-Jul-30 02:07:41 START begin_task: Starting task 'waiting on stopping WAPPs' 2009-Jul-30 02:07:41 LOG5 begin_task: Level: (5) ID = <10102> Status = 1 0 0 1 failed 2009-Jul-30 02:07:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2009-Jul-30 02:07:41 ERROR WAPP=4-check_pid: ERROR WAPP process with process-ID 10070 is no longer running! 2009-Jul-30 02:07:41 ERROR WAPP=3-check_pid: ERROR WAPP process with process-ID 1830 is no longer running! 2009-Jul-30 02:07:41 ERROR WAPP=2-check_pid: ERROR WAPP process with process-ID 19259 is no longer running! 2009-Jul-30 02:07:41 ERROR WAPP=1-check_pid: ERROR WAPP process with process-ID 27188 is no longer running! 2009-Jul-30 02:07:41 LOG4 exec_msg: From WAPPWATCH3: log_message ERROR {WAPP3-wapp_watch} {ERROR WAPP-program 'wapprt' has died!} 2009-Jul-30 02:07:41 ERROR WAPP3-wapp_watch: ERROR WAPP-program 'wapprt' has died! 2009-Jul-30 02:07:41 LOG4 exec_msg: From WAPPWATCH3: wapp_failure 3 2009-Jul-30 02:07:41 LOG5 wapp_failure: Calling 'wapp_failure 3' 2009-Jul-30 02:07:41 ERROR wapp_failure: ERROR WAPP-3 has failed! 2009-Jul-30 02:07:41 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 3 crash' 2009-Jul-30 02:07:41 START begin_task: Starting task 'handling WAPP failure' 2009-Jul-30 02:07:41 LOG5 begin_task: Level: (6) ID = <10103> Status = 1 0 0 1 failed 2009-Jul-30 02:07:41 NOTE handle_wapp_failure: Will abort task 'running command file 'command_galfasrc.cmd'' since the WAPP failure preference is set to 'abort'! 2009-Jul-30 02:07:41 ALERT handle_wapp_failure: Aborting due to WAPP failure! 2009-Jul-30 02:07:41 LOG1 task_failed: Task 'handling WAPP failure' failed! 2009-Jul-30 02:07:41 LOG5 task_failed: Level: (6) ID = <10103> Status = 1 0 0 1 failed 2009-Jul-30 02:07:41 WARNING abort_task: WARNING abort requested! 2009-Jul-30 02:07:41 WARNING abort_task: WARNING Aborting wait for handling WAPP failure 2009-Jul-30 02:07:41 ALERT handle_wapp_failure: Restarting WAPP-3! 2009-Jul-30 02:07:41 NOTE handle_wapp_failure: Stand by for automatic WAPP-3 reconfiguration in 6 seconds! 2009-Jul-30 02:07:41 STOP end_task: Finishing task 'handling WAPP failure' with status 'FAILED' 2009-Jul-30 02:07:41 LOG5 end_task: Level: (6) ID = <10103> Status = 1 0 0 1 failed 2009-Jul-30 02:07:42 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'FAILED' 2009-Jul-30 02:07:42 LOG5 end_task: Level: (5) ID = <10102> Status = 1 0 0 1 failed 2009-Jul-30 02:07:42 STOP end_task: Finishing task 'stopping the WAPPs' with status 'FAILED' 2009-Jul-30 02:07:42 LOG5 end_task: Level: (4) ID = <10101> Status = 1 0 0 1 failed 2009-Jul-30 02:07:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'FAILED' 2009-Jul-30 02:07:42 LOG5 end_task: Level: (3) ID = <10098> Status = 1 0 0 1 failed 2009-Jul-30 02:07:42 INFO2 smartfreq: Switching off CAL 2009-Jul-30 02:07:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jul-30 02:07:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jul-30 02:07:42 INFO3 restore_frequencies: Restoring original frequencies 2009-Jul-30 02:07:42 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:07:42 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57793 J 2009-Jul-30 02:07:42 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:07:42 LOG2 antvel: Parameters to Doppler: Topocentric 22061 2009 211 0.0 2009-Jul-30 02:07:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:07:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2009-Jul-30 02:07:42 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2009-Jul-30 02:07:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:07:42 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:07:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2009-Jul-30 02:07:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:07:42 STOP finish_task: Finishing task 'smart frequency switching' 2009-Jul-30 02:07:42 LOG5 finish_task: Level: (2) ID = <10088> Status = 1 0 0 1 failed 2009-Jul-30 02:07:42 ERROR finish_task: ERROR failed pattern: smart frequency switching 2009-Jul-30 02:07:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2009-Jul-30 02:07:42 END end_task: Finishing task 'smart frequency switching' with status 'FAILED' 2009-Jul-30 02:07:42 LOG5 end_task: Level: (2) ID = <10088> Status = 1 0 0 1 failed 2009-Jul-30 02:07:42 ALERT run_command_file: Stopping command file processing at line 20! 2009-Jul-30 02:07:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Jul-30 02:07:42 STOP finish_task: Finishing task 'running command file 'command_galfasrc.cmd'' 2009-Jul-30 02:07:42 LOG5 finish_task: Level: (1) ID = <10072> Status = 1 0 0 1 failed 2009-Jul-30 02:07:42 ERROR finish_task: ERROR failed running: command file 'command_galfasrc.cmd' 2009-Jul-30 02:07:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2009-Jul-30 02:07:42 END end_task: Finishing task 'running command file 'command_galfasrc.cmd'' with status 'FAILED' 2009-Jul-30 02:07:42 LOG5 end_task: Level: (1) ID = <10072> Status = 1 0 0 1 failed 2009-Jul-30 02:07:42 LOG3 exec_msg: Closing socket 2009-Jul-30 02:07:42 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-30 02:07:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2009-Jul-30 02:07:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-30 02:07:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:07:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-30 02:07:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.107 (still bad) 2009-Jul-30 02:07:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:07:42 LOG4 exec_msg: From WAPPWATCH2: log_message ERROR {WAPP2-wapp_watch} {ERROR WAPP-program 'wapprt' has died!} 2009-Jul-30 02:07:42 ERROR WAPP2-wapp_watch: ERROR WAPP-program 'wapprt' has died! 2009-Jul-30 02:07:43 LOG4 exec_msg: From WAPPWATCH2: wapp_failure 2 2009-Jul-30 02:07:43 LOG5 wapp_failure: Calling 'wapp_failure 2' 2009-Jul-30 02:07:43 ERROR wapp_failure: ERROR WAPP-2 has failed! 2009-Jul-30 02:07:43 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 2 crash' 2009-Jul-30 02:07:43 BEGIN begin_task: Starting task 'handling WAPP failure' 2009-Jul-30 02:07:43 LOG5 begin_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Jul-30 02:07:43 ALERT handle_wapp_failure: Restarting WAPP-2! 2009-Jul-30 02:07:43 NOTE handle_wapp_failure: Stand by for automatic WAPP-2 reconfiguration in 6 seconds! 2009-Jul-30 02:07:43 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2009-Jul-30 02:07:43 LOG5 end_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Jul-30 02:07:43 LOG3 exec_msg: Closing socket 2009-Jul-30 02:07:44 LOG3 exec_msg: Closing socket 2009-Jul-30 02:07:44 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Jul-30 02:07:45 LOG4 exec_msg: From WAPPWATCH4: log_message ERROR {WAPP4-wapp_watch} {ERROR WAPP-program 'wapprt' has died!} 2009-Jul-30 02:07:45 ERROR WAPP4-wapp_watch: ERROR WAPP-program 'wapprt' has died! 2009-Jul-30 02:07:45 LOG4 exec_msg: From WAPPWATCH4: wapp_failure 4 2009-Jul-30 02:07:45 LOG5 wapp_failure: Calling 'wapp_failure 4' 2009-Jul-30 02:07:45 ERROR wapp_failure: ERROR WAPP-4 has failed! 2009-Jul-30 02:07:45 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 4 crash' 2009-Jul-30 02:07:45 BEGIN begin_task: Starting task 'handling WAPP failure' 2009-Jul-30 02:07:45 LOG5 begin_task: Level: (1) ID = <10105> Status = 0 0 0 0 ok 2009-Jul-30 02:07:45 ALERT handle_wapp_failure: Restarting WAPP-4! 2009-Jul-30 02:07:45 NOTE handle_wapp_failure: Stand by for automatic WAPP-4 reconfiguration in 6 seconds! 2009-Jul-30 02:07:45 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2009-Jul-30 02:07:45 LOG5 end_task: Level: (1) ID = <10105> Status = 0 0 0 0 ok 2009-Jul-30 02:07:45 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Jul-30 02:07:46 LOG3 exec_msg: Closing socket 2009-Jul-30 02:07:46 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Jul-30 02:07:47 LOG5 wapp_restart: Calling 'wapp_restart 1' 2009-Jul-30 02:07:47 BEGIN begin_task: Starting task 'handling WAPP failure' 2009-Jul-30 02:07:47 LOG5 begin_task: Level: (1) ID = <10106> Status = 0 0 0 0 ok 2009-Jul-30 02:07:47 ALERT wapp_restart: Sending configuration information to WAPP-1 2009-Jul-30 02:07:47 LOG3 sock_errsend: To WAPPCON: TIMEOUT 5 2009-Jul-30 02:07:47 LOG3 sock_errsend: To WAPPCON: PROJECT a2048 R Minchin 2009-Jul-30 02:07:47 INFO1 wapp_restart: Configuration information sent to WAPP-1 2009-Jul-30 02:07:47 NOTE wapp_restart: WAPP-1 should be ready now 2009-Jul-30 02:07:47 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2009-Jul-30 02:07:47 LOG5 end_task: Level: (1) ID = <10106> Status = 0 0 0 0 ok 2009-Jul-30 02:07:47 LOG4 WAPP=1-wappcon: Received command 'TIMEOUT 5' 2009-Jul-30 02:07:47 LOG4 WAPP=1-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Jul-30 02:07:48 LOG5 wapp_restart: Calling 'wapp_restart 3' 2009-Jul-30 02:07:48 BEGIN begin_task: Starting task 'handling WAPP failure' 2009-Jul-30 02:07:48 LOG5 begin_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2009-Jul-30 02:07:48 ALERT wapp_restart: Sending configuration information to WAPP-3 2009-Jul-30 02:07:48 LOG3 sock_errsend: To WAPPCON3: TIMEOUT 5 2009-Jul-30 02:07:48 LOG3 sock_errsend: To WAPPCON3: PROJECT a2048 R Minchin 2009-Jul-30 02:07:48 INFO1 wapp_restart: Configuration information sent to WAPP-3 2009-Jul-30 02:07:48 NOTE wapp_restart: WAPP-3 should be ready now 2009-Jul-30 02:07:48 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2009-Jul-30 02:07:48 LOG5 end_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2009-Jul-30 02:07:48 LOG4 WAPP=3-wappcon: Received command 'TIMEOUT 5' 2009-Jul-30 02:07:48 LOG4 WAPP=3-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Jul-30 02:07:48 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Jul-30 02:07:49 LOG5 wapp_restart: Calling 'wapp_restart 2' 2009-Jul-30 02:07:49 BEGIN begin_task: Starting task 'handling WAPP failure' 2009-Jul-30 02:07:49 LOG5 begin_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2009-Jul-30 02:07:49 ALERT wapp_restart: Sending configuration information to WAPP-2 2009-Jul-30 02:07:49 LOG3 sock_errsend: To WAPPCON2: TIMEOUT 5 2009-Jul-30 02:07:49 LOG3 sock_errsend: To WAPPCON2: PROJECT a2048 R Minchin 2009-Jul-30 02:07:49 INFO1 wapp_restart: Configuration information sent to WAPP-2 2009-Jul-30 02:07:49 NOTE wapp_restart: WAPP-2 should be ready now 2009-Jul-30 02:07:49 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2009-Jul-30 02:07:49 LOG5 end_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2009-Jul-30 02:07:49 LOG4 WAPP=2-wappcon: Received command 'TIMEOUT 5' 2009-Jul-30 02:07:49 LOG4 WAPP=2-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Jul-30 02:07:51 LOG5 wapp_restart: Calling 'wapp_restart 4' 2009-Jul-30 02:07:51 BEGIN begin_task: Starting task 'handling WAPP failure' 2009-Jul-30 02:07:51 LOG5 begin_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2009-Jul-30 02:07:51 ALERT wapp_restart: Sending configuration information to WAPP-4 2009-Jul-30 02:07:51 LOG3 sock_errsend: To WAPPCON4: TIMEOUT 5 2009-Jul-30 02:07:51 LOG3 sock_errsend: To WAPPCON4: PROJECT a2048 R Minchin 2009-Jul-30 02:07:51 INFO1 wapp_restart: Configuration information sent to WAPP-4 2009-Jul-30 02:07:51 NOTE wapp_restart: WAPP-4 should be ready now 2009-Jul-30 02:07:51 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2009-Jul-30 02:07:51 LOG5 end_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2009-Jul-30 02:07:51 LOG4 WAPP=4-wappcon: Received command 'TIMEOUT 5' 2009-Jul-30 02:07:51 LOG4 WAPP=4-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Jul-30 02:08:46 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Jul-30 02:08:46 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 2 1 13 2009-Jul-30 02:08:46 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 2 1 13' 2009-Jul-30 02:08:46 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2009-Jul-30 02:08:46 LOG5 begin_task: Level: (1) ID = <10110> Status = 0 0 0 0 ok 2009-Jul-30 02:08:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2009-Jul-30 02:08:47 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 2 2009-Jul-30 02:08:47 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2009-Jul-30 02:08:47 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Jul-30 02:08:47 NOTE CIMA-check_config_file: File 'togs_ages.conf' contains a observing mode set-up which will be ignored! 2009-Jul-30 02:08:47 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-30 02:08:47 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Jul-30 02:08:47 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2009-Jul-30 02:08:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Jul-30 02:08:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jul-30 02:08:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jul-30 02:08:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jul-30 02:08:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jul-30 02:08:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Jul-30 02:08:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Jul-30 02:08:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Jul-30 02:08:50 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-30 02:08:50 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Jul-30 02:08:50 LOG5 begin_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2009-Jul-30 02:08:50 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Jul-30 02:08:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Jul-30 02:08:50 LOG1 config_iflo: Receiver ALFA already selected 2009-Jul-30 02:08:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-30 02:08:50 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jul-30 02:08:50 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-30 02:08:50 LOG5 begin_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2009-Jul-30 02:08:50 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-30 02:08:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-30 02:08:50 LOG5 end_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2009-Jul-30 02:08:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-30 02:08:50 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jul-30 02:08:50 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Jul-30 02:08:50 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Jul-30 02:08:50 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Jul-30 02:08:50 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Jul-30 02:08:50 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Jul-30 02:08:50 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Jul-30 02:08:50 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Jul-30 02:08:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2009-Jul-30 02:08:50 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Jul-30 02:08:50 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Jul-30 02:08:50 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Jul-30 02:08:50 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Jul-30 02:08:50 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Jul-30 02:08:50 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Jul-30 02:08:50 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Jul-30 02:08:50 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Jul-30 02:08:50 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Jul-30 02:08:50 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Jul-30 02:08:50 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Jul-30 02:08:50 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Jul-30 02:08:50 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Jul-30 02:08:50 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Jul-30 02:08:50 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Jul-30 02:08:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:08:50 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Jul-30 02:08:50 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Jul-30 02:08:50 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Jul-30 02:08:50 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Jul-30 02:08:50 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Jul-30 02:08:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Jul-30 02:08:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:08:50 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Jul-30 02:08:50 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Jul-30 02:08:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2009-Jul-30 02:08:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Jul-30 02:08:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:08:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:08:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:08:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:08:50 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Jul-30 02:08:50 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Jul-30 02:08:50 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Jul-30 02:08:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Jul-30 02:08:50 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Jul-30 02:08:50 LOG5 finish_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2009-Jul-30 02:08:50 DONE finish_task: DONE finished configuration: IF/LO path 2009-Jul-30 02:08:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 02:08:50 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Jul-30 02:08:50 LOG5 end_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2009-Jul-30 02:08:50 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Jul-30 02:08:51 LOG5 begin_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2009-Jul-30 02:08:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Jul-30 02:08:51 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Jul-30 02:08:51 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Jul-30 02:08:51 START begin_task: Starting task 'selecting calibration port' 2009-Jul-30 02:08:51 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-Jul-30 02:08:51 LOG3 vw_send: To DATATAKING: calport 3 2009-Jul-30 02:08:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Jul-30 02:08:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:08:51 START begin_task: Starting task 'waiting on calport' 2009-Jul-30 02:08:51 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2009-Jul-30 02:08:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:08:51 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Jul-30 02:08:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:08:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:08:51 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-30 02:08:51 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Jul-30 02:08:51 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2009-Jul-30 02:08:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Jul-30 02:08:51 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Jul-30 02:08:51 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-Jul-30 02:08:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jul-30 02:08:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jul-30 02:08:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-30 02:08:51 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Jul-30 02:08:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:08:51 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-30 02:08:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-30 02:08:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-30 02:08:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-30 02:08:51 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Jul-30 02:08:51 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Jul-30 02:08:51 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Jul-30 02:08:51 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Jul-30 02:08:51 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Jul-30 02:08:51 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Jul-30 02:08:51 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Jul-30 02:08:51 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Jul-30 02:08:51 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Jul-30 02:08:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2009-Jul-30 02:08:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2009-Jul-30 02:08:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2009-Jul-30 02:08:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2009-Jul-30 02:08:51 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Jul-30 02:08:51 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Jul-30 02:08:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-30 02:08:51 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Jul-30 02:08:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Jul-30 02:08:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Jul-30 02:08:51 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-30 02:08:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Jul-30 02:08:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-30 02:08:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-30 02:08:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-30 02:08:51 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Jul-30 02:08:51 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Jul-30 02:08:51 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Jul-30 02:08:51 LOG5 finish_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2009-Jul-30 02:08:51 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Jul-30 02:08:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 02:08:52 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Jul-30 02:08:52 LOG5 end_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2009-Jul-30 02:08:52 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2009-Jul-30 02:08:52 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2009-Jul-30 02:08:52 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2009-Jul-30 02:08:52 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2009-Jul-30 02:08:52 INFO5 is_if_valid: Condition parsed as: 1 2009-Jul-30 02:08:52 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2009-Jul-30 02:08:52 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2009-Jul-30 02:08:52 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Jul-30 02:08:52 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Jul-30 02:08:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Jul-30 02:08:52 LOG3 track_source: Calling 'track_source galfasrc 224000 +155900 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2009-Jul-30 02:08:52 START begin_task: Starting task 'sending tracking commands' 2009-Jul-30 02:08:52 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Jul-30 02:08:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Jul-30 02:08:52 INFO1 track_source: Starting to track galfasrc 2009-Jul-30 02:08:52 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Jul-30 02:08:52 LOG3 vw_send: To DATATAKING: set ra 224000 2009-Jul-30 02:08:52 LOG3 vw_send: To DATATAKING: set dec +155900 2009-Jul-30 02:08:52 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-30 02:08:52 LOG3 vw_send: To DATATAKING: pnt tr 224000 +155900 -CJ 2009-Jul-30 02:08:52 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Jul-30 02:08:52 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-30 02:08:52 LOG5 finish_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Jul-30 02:08:52 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jul-30 02:08:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 02:08:52 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jul-30 02:08:52 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Jul-30 02:08:52 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Jul-30 02:08:52 LOG5 finish_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Jul-30 02:08:52 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Jul-30 02:08:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 02:08:52 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Jul-30 02:08:52 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Jul-30 02:08:52 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2009-Jul-30 02:08:52 INFO1 run_command_line: Skipping line 'ELSEIF isup(galfasrc2) then' since an earlier condition already has been true 2009-Jul-30 02:08:52 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2009-Jul-30 02:08:52 INFO1 run_command_line: Skipping line 'GOTO galfasrc2' in non-true conditional branch 2009-Jul-30 02:08:52 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2009-Jul-30 02:08:52 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2009-Jul-30 02:08:52 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2009-Jul-30 02:08:52 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2009-Jul-30 02:08:52 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2009-Jul-30 02:08:53 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2009-Jul-30 02:08:53 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2009-Jul-30 02:08:53 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2009-Jul-30 02:08:53 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Jul-30 02:08:53 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Jul-30 02:08:53 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Jul-30 02:08:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Jul-30 02:08:53 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Jul-30 02:08:53 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Jul-30 02:08:53 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Jul-30 02:08:53 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Jul-30 02:08:53 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2009-Jul-30 02:08:53 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Jul-30 02:08:53 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Jul-30 02:08:53 LOG4 got_cormsg: From DATATAKING: set ra 224000 2009-Jul-30 02:08:53 LOG4 got_cormsg: From DATATAKING: set dec +155900 2009-Jul-30 02:08:53 LOG4 got_cormsg: From DATATAKING: vw% 224000 2009-Jul-30 02:08:53 LOG4 got_cormsg: From DATATAKING: vw% +155900 2009-Jul-30 02:08:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:08:53 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-30 02:08:53 LOG4 got_cormsg: From DATATAKING: pnt tr 224000 +155900 -CJ 2009-Jul-30 02:08:53 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Jul-30 02:08:53 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jul-30 02:08:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:08:54 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jul-30 02:08:54 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Jul-30 02:08:54 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Jul-30 02:08:54 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2009-Jul-30 02:08:54 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jul-30 02:08:54 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Jul-30 02:08:54 LOG5 finish_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Jul-30 02:08:54 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Jul-30 02:08:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 02:08:54 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Jul-30 02:08:54 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Jul-30 02:08:54 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2009-Jul-30 02:08:54 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Jul-30 02:08:54 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Jul-30 02:08:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jul-30 02:08:54 LOG3 waittrk: Start waittrk 5 2009-Jul-30 02:08:54 START begin_task: Starting task 'waiting on telescope movement' 2009-Jul-30 02:08:54 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2009-Jul-30 02:08:59 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jul-30 02:08:59 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2009-Jul-30 02:08:59 START begin_task: Starting task 'waiting on telescope on source' 2009-Jul-30 02:08:59 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Jul-30 02:08:59 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jul-30 02:08:59 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Jul-30 02:08:59 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jul-30 02:08:59 INFO2 waittrk: Now tracking galfasrc 2009-Jul-30 02:08:59 LOG4 waittrk: Current telescope position: Az = 288.65 ZA = 6.72 2009-Jul-30 02:08:59 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jul-30 02:08:59 LOG5 finish_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Jul-30 02:08:59 DONE finish_task: DONE finished waiting: telescope on source 2009-Jul-30 02:08:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 02:08:59 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jul-30 02:08:59 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Jul-30 02:08:59 COMMAND run_command_line: EXECUTING command 20: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2009-Jul-30 02:08:59 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Jul-30 02:08:59 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-30 02:08:59 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2009-Jul-30 02:08:59 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Jul-30 02:08:59 LOG5 begin_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2009-Jul-30 02:08:59 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Jul-30 02:08:59 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Jul-30 02:08:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Jul-30 02:08:59 START begin_task: Starting task 'selecting calibration type' 2009-Jul-30 02:08:59 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Jul-30 02:08:59 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jul-30 02:08:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jul-30 02:08:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:08:59 START begin_task: Starting task 'waiting on setcal' 2009-Jul-30 02:08:59 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Jul-30 02:09:00 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jul-30 02:09:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:09:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:09:00 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-30 02:09:00 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jul-30 02:09:00 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Jul-30 02:09:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jul-30 02:09:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-30 02:09:00 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jul-30 02:09:00 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-30 02:09:00 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Jul-30 02:09:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:09:00 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-30 02:09:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-30 02:09:00 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Jul-30 02:09:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-30 02:09:00 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jul-30 02:09:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-30 02:09:00 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jul-30 02:09:00 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-30 02:09:00 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2009-Jul-30 02:09:00 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-30 02:09:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-30 02:09:00 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2009-Jul-30 02:09:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-30 02:09:00 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jul-30 02:09:00 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jul-30 02:09:00 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Jul-30 02:09:00 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2009-Jul-30 02:09:00 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2009-Jul-30 02:09:00 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2009-Jul-30 02:09:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2009-Jul-30 02:09:00 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090730.a2048.0001.fits' is empty! 2009-Jul-30 02:09:00 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Jul-30 02:09:00 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Jul-30 02:09:00 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Jul-30 02:09:00 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jul-30 02:09:00 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jul-30 02:09:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-30 02:09:00 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Jul-30 02:09:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Jul-30 02:09:00 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-30 02:09:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-30 02:09:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-30 02:09:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-30 02:09:00 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Jul-30 02:09:00 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Jul-30 02:09:00 START begin_task: Starting task 'adjusting WAPP power' 2009-Jul-30 02:09:00 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Jul-30 02:09:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Jul-30 02:09:00 INFO2 adjust_power: Starting to adjust WAPP power 2009-Jul-30 02:09:00 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Jul-30 02:09:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Jul-30 02:09:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:09:00 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Jul-30 02:09:00 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2009-Jul-30 02:09:00 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Jul-30 02:09:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:09:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:09:03 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-30 02:09:03 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Jul-30 02:09:03 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2009-Jul-30 02:09:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Jul-30 02:09:03 START begin_task: Starting task 'adjusting WAPP power' 2009-Jul-30 02:09:03 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2009-Jul-30 02:09:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Jul-30 02:09:03 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-30 02:09:03 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-30 02:09:04 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-30 02:09:04 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-30 02:09:04 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Jul-30 02:09:04 LOG5 begin_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2009-Jul-30 02:09:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Jul-30 02:09:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:09:04 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 7 dB 2009-Jul-30 02:09:04 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Jul-30 02:09:04 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2009-Jul-30 02:09:04 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 4 4 dB 2009-Jul-30 02:09:04 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Jul-30 02:09:04 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Jul-30 02:09:04 LOG5 end_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2009-Jul-30 02:09:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.046 0.936 ALFA beam 1: 1.101 0.922 2009-Jul-30 02:09:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.958 0.999 ALFA beam 3: 0.915 0.980 2009-Jul-30 02:09:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.898 1.062 ALFA beam 5: 1.117 1.094 2009-Jul-30 02:09:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.912 0.111 ALFA beam 7: 1.006 0.135 2009-Jul-30 02:09:04 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jul-30 02:09:04 LOG5 finish_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2009-Jul-30 02:09:04 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Jul-30 02:09:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 02:09:04 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jul-30 02:09:04 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2009-Jul-30 02:09:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jul-30 02:09:04 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jul-30 02:09:04 LOG5 finish_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Jul-30 02:09:04 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Jul-30 02:09:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 02:09:04 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jul-30 02:09:04 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Jul-30 02:09:04 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2009-Jul-30 02:09:04 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2009-Jul-30 02:09:04 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-Jul-30 02:09:04 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:09:04 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57793 J 2009-Jul-30 02:09:04 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:09:04 LOG2 antvel: Parameters to Doppler: Topocentric 22144 2009 211 0.0 2009-Jul-30 02:09:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:09:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-Jul-30 02:09:04 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-Jul-30 02:09:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:09:04 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:09:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Jul-30 02:09:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:09:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-30 02:09:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:09:04 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2009-Jul-30 02:09:04 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.235300 2009.5779319086369 18.999933 2009-Jul-30 02:09:04 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666668 15.983333333333333 2009-Jul-30 02:09:04 LOG4 log_alfabeam: ALFABEAM 1 22.659464283501432 16.005189871735720 2009-Jul-30 02:09:04 LOG4 log_alfabeam: ALFABEAM 2 22.662230254033897 15.915933031411848 2009-Jul-30 02:09:04 LOG4 log_alfabeam: ALFABEAM 3 22.669417886650116 15.893161863189775 2009-Jul-30 02:09:04 LOG4 log_alfabeam: ALFABEAM 4 22.673878173626299 15.961944505708429 2009-Jul-30 02:09:04 LOG4 log_alfabeam: ALFABEAM 5 22.671056762019674 16.051945002711211 2009-Jul-30 02:09:04 LOG4 log_alfabeam: ALFABEAM 6 22.663831329283717 16.072416311359714 2009-Jul-30 02:09:04 INFO2 take_data: Starting WAPP+GALFA scan: 921100012 2009-Jul-30 02:09:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:09:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:09:05 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2009-Jul-30 02:09:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:09:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Jul-30 02:09:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:09:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:09:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:09:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22146.00 2009-Jul-30 02:09:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:09:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.114 < 0.75)! 2009-Jul-30 02:09:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.096 0.968 1.154 0.943 2009-Jul-30 02:09:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.972 1.034 0.981 1.025 2009-Jul-30 02:09:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.955 1.062 1.117 1.094 2009-Jul-30 02:09:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.114 1.044 0.139 2009-Jul-30 02:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.114 and 1.195 (still bad) 2009-Jul-30 02:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.114 and 1.197 (still bad) 2009-Jul-30 02:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.114 and 1.197 (still bad) 2009-Jul-30 02:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.114 and 1.196 (still bad) 2009-Jul-30 02:09:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:09:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:09:16 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2009-Jul-30 02:09:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:09:16 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2009-Jul-30 02:09:16 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2009-Jul-30 02:09:16 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2009-Jul-30 02:09:16 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2009-Jul-30 02:09:16 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:09:16 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57793 J 2009-Jul-30 02:09:16 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:09:16 LOG2 antvel: Parameters to Doppler: Topocentric 22156 2009 211 0.0 2009-Jul-30 02:09:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:09:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2009-Jul-30 02:09:16 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2009-Jul-30 02:09:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:09:16 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:09:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Jul-30 02:09:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:09:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-30 02:09:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:09:16 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2009-Jul-30 02:09:16 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.238642 2009.5779322888941 18.999933 2009-Jul-30 02:09:16 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666668 15.983333333333329 2009-Jul-30 02:09:16 LOG4 log_alfabeam: ALFABEAM 1 22.659467913274927 16.005436678258445 2009-Jul-30 02:09:16 LOG4 log_alfabeam: ALFABEAM 2 22.662219074488348 15.916088398488249 2009-Jul-30 02:09:16 LOG4 log_alfabeam: ALFABEAM 3 22.669402847364019 15.893064860443239 2009-Jul-30 02:09:16 LOG4 log_alfabeam: ALFABEAM 4 22.673874685546501 15.961700933522781 2009-Jul-30 02:09:16 LOG4 log_alfabeam: ALFABEAM 5 22.671067810093255 16.051799596447410 2009-Jul-30 02:09:16 LOG4 log_alfabeam: ALFABEAM 6 22.663845646209872 16.072508850215470 2009-Jul-30 02:09:16 INFO2 take_data: Starting WAPP+GALFA scan: 921100013 2009-Jul-30 02:09:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:09:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:09:17 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2009-Jul-30 02:09:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:09:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Jul-30 02:09:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:09:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:09:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.114 and 1.193 (still bad) 2009-Jul-30 02:09:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22158.00 2009-Jul-30 02:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Jul-30 02:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Jul-30 02:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Jul-30 02:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Jul-30 02:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Jul-30 02:09:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:09:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:09:28 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2009-Jul-30 02:09:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:09:28 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2009-Jul-30 02:09:28 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2009-Jul-30 02:09:28 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2009-Jul-30 02:09:28 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2009-Jul-30 02:09:28 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:09:28 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57793 J 2009-Jul-30 02:09:28 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:09:28 LOG2 antvel: Parameters to Doppler: Topocentric 22168 2009 211 0.0 2009-Jul-30 02:09:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:09:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2009-Jul-30 02:09:28 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2009-Jul-30 02:09:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:09:28 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:09:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Jul-30 02:09:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:09:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-30 02:09:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:09:28 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2009-Jul-30 02:09:28 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.241985 2009.5779326691511 18.999933 2009-Jul-30 02:09:28 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333327 2009-Jul-30 02:09:28 LOG4 log_alfabeam: ALFABEAM 1 22.659471637569371 16.005686957491317 2009-Jul-30 02:09:28 LOG4 log_alfabeam: ALFABEAM 2 22.662207758693473 15.916246421177124 2009-Jul-30 02:09:28 LOG4 log_alfabeam: ALFABEAM 3 22.669387572168649 15.892966980821699 2009-Jul-30 02:09:28 LOG4 log_alfabeam: ALFABEAM 4 22.673871106047152 15.961453922215901 2009-Jul-30 02:09:28 LOG4 log_alfabeam: ALFABEAM 5 22.671078996092426 16.051651681588069 2009-Jul-30 02:09:28 LOG4 log_alfabeam: ALFABEAM 6 22.663860187537985 16.072602257949594 2009-Jul-30 02:09:28 INFO2 take_data: Starting WAPP+GALFA scan: 921100014 2009-Jul-30 02:09:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:09:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:09:29 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2009-Jul-30 02:09:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:09:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Jul-30 02:09:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:09:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:09:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:09:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22170.00 2009-Jul-30 02:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Jul-30 02:09:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:09:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Jul-30 02:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.113 (still bad) 2009-Jul-30 02:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Jul-30 02:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Jul-30 02:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.115 (still bad) 2009-Jul-30 02:09:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:09:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:09:40 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2009-Jul-30 02:09:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:09:40 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2009-Jul-30 02:09:40 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2009-Jul-30 02:09:40 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2009-Jul-30 02:09:40 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2009-Jul-30 02:09:40 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:09:40 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57793 J 2009-Jul-30 02:09:40 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:09:40 LOG2 antvel: Parameters to Doppler: Topocentric 22180 2009 211 0.0 2009-Jul-30 02:09:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:09:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2009-Jul-30 02:09:40 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2009-Jul-30 02:09:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:09:40 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:09:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Jul-30 02:09:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:09:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-30 02:09:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:09:40 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-Jul-30 02:09:40 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.245327 2009.5779330494081 18.999933 2009-Jul-30 02:09:40 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333336 2009-Jul-30 02:09:40 LOG4 log_alfabeam: ALFABEAM 1 22.659475456943024 16.005940621442999 2009-Jul-30 02:09:40 LOG4 log_alfabeam: ALFABEAM 2 22.662196311529605 15.916407064092384 2009-Jul-30 02:09:40 LOG4 log_alfabeam: ALFABEAM 3 22.669372065392356 15.892868279674113 2009-Jul-30 02:09:40 LOG4 log_alfabeam: ALFABEAM 4 22.673867434564084 15.961203558139269 2009-Jul-30 02:09:40 LOG4 log_alfabeam: ALFABEAM 5 22.671090315325902 16.051501290223129 2009-Jul-30 02:09:40 LOG4 log_alfabeam: ALFABEAM 6 22.663874949144851 16.072696483020284 2009-Jul-30 02:09:40 INFO2 take_data: Starting WAPP+GALFA scan: 921100015 2009-Jul-30 02:09:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:09:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:09:41 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2009-Jul-30 02:09:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:09:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Jul-30 02:09:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:09:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:09:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:09:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22182.00 2009-Jul-30 02:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.115 (still bad) 2009-Jul-30 02:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.109 (still bad) 2009-Jul-30 02:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.108 (still bad) 2009-Jul-30 02:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.112 (still bad) 2009-Jul-30 02:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.108 (still bad) 2009-Jul-30 02:09:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:09:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:09:52 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2009-Jul-30 02:09:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:09:52 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-Jul-30 02:09:52 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2009-Jul-30 02:09:52 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2009-Jul-30 02:09:52 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2009-Jul-30 02:09:52 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:09:52 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57793 J 2009-Jul-30 02:09:52 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:09:52 LOG2 antvel: Parameters to Doppler: Topocentric 22192 2009 211 0.0 2009-Jul-30 02:09:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:09:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2009-Jul-30 02:09:52 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2009-Jul-30 02:09:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:09:52 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:09:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Jul-30 02:09:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:09:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-30 02:09:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:09:52 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2009-Jul-30 02:09:52 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.248670 2009.5779334296651 18.999933 2009-Jul-30 02:09:52 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333333 2009-Jul-30 02:09:52 LOG4 log_alfabeam: ALFABEAM 1 22.659479376565130 16.006197885030481 2009-Jul-30 02:09:52 LOG4 log_alfabeam: ALFABEAM 2 22.662184724231707 15.916570484216029 2009-Jul-30 02:09:52 LOG4 log_alfabeam: ALFABEAM 3 22.669356312818476 15.892768695048947 2009-Jul-30 02:09:52 LOG4 log_alfabeam: ALFABEAM 4 22.673863666099734 15.960949628662235 2009-Jul-30 02:09:52 LOG4 log_alfabeam: ALFABEAM 5 22.671101776598558 16.051348274316030 2009-Jul-30 02:09:52 LOG4 log_alfabeam: ALFABEAM 6 22.663889944561458 16.072791585899179 2009-Jul-30 02:09:52 INFO2 take_data: Starting WAPP+GALFA scan: 921100016 2009-Jul-30 02:09:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:09:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:09:53 LOG5 begin_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2009-Jul-30 02:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.108 (still bad) 2009-Jul-30 02:09:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:09:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Jul-30 02:09:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:09:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:09:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:09:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22194.00 2009-Jul-30 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.108 (still bad) 2009-Jul-30 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.107 (still bad) 2009-Jul-30 02:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.108 (still bad) 2009-Jul-30 02:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.114 (still bad) 2009-Jul-30 02:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.111 (still bad) 2009-Jul-30 02:10:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:10:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:10:04 LOG5 end_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2009-Jul-30 02:10:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:10:04 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2009-Jul-30 02:10:04 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2009-Jul-30 02:10:04 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2009-Jul-30 02:10:04 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2009-Jul-30 02:10:04 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:10:04 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57793 J 2009-Jul-30 02:10:04 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:10:04 LOG2 antvel: Parameters to Doppler: Topocentric 22204 2009 211 0.0 2009-Jul-30 02:10:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:10:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2009-Jul-30 02:10:04 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2009-Jul-30 02:10:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:10:04 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:10:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Jul-30 02:10:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:10:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-30 02:10:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:10:04 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2009-Jul-30 02:10:04 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.252012 2009.5779338099221 18.999933 2009-Jul-30 02:10:04 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666654 15.983333333333333 2009-Jul-30 02:10:04 LOG4 log_alfabeam: ALFABEAM 1 22.659483397072915 16.006458658806721 2009-Jul-30 02:10:04 LOG4 log_alfabeam: ALFABEAM 2 22.662173001794276 15.916736646324582 2009-Jul-30 02:10:04 LOG4 log_alfabeam: ALFABEAM 3 22.669340318808512 15.892668283991817 2009-Jul-30 02:10:04 LOG4 log_alfabeam: ALFABEAM 4 22.673859800012224 15.960692221544289 2009-Jul-30 02:10:04 LOG4 log_alfabeam: ALFABEAM 5 22.671113375112910 16.051192665734806 2009-Jul-30 02:10:04 LOG4 log_alfabeam: ALFABEAM 6 22.663905169634020 16.072887513490279 2009-Jul-30 02:10:04 INFO2 take_data: Starting WAPP+GALFA scan: 921100017 2009-Jul-30 02:10:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:10:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:10:05 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2009-Jul-30 02:10:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:10:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Jul-30 02:10:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:10:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:10:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.109 (still bad) 2009-Jul-30 02:10:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22206.00 2009-Jul-30 02:10:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:10:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.109 (still bad) 2009-Jul-30 02:10:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Jul-30 02:10:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.039 0.930 1.093 0.917 2009-Jul-30 02:10:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.999 0.912 0.992 2009-Jul-30 02:10:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.905 1.076 1.111 1.074 2009-Jul-30 02:10:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.112 1.011 0.137 2009-Jul-30 02:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.111 (still bad) 2009-Jul-30 02:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.116 (still bad) 2009-Jul-30 02:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.109 (still bad) 2009-Jul-30 02:10:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:10:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:10:16 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2009-Jul-30 02:10:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:10:16 LOG5 end_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2009-Jul-30 02:10:16 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2009-Jul-30 02:10:16 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2009-Jul-30 02:10:16 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2009-Jul-30 02:10:16 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:10:16 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57793 J 2009-Jul-30 02:10:16 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:10:16 LOG2 antvel: Parameters to Doppler: Topocentric 22216 2009 211 0.0 2009-Jul-30 02:10:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:10:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2009-Jul-30 02:10:16 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2009-Jul-30 02:10:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:10:16 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:10:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Jul-30 02:10:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:10:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-30 02:10:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:10:16 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2009-Jul-30 02:10:16 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.255354 2009.5779341901793 18.999933 2009-Jul-30 02:10:16 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333329 2009-Jul-30 02:10:16 LOG4 log_alfabeam: ALFABEAM 1 22.659487522709025 16.006723085053448 2009-Jul-30 02:10:16 LOG4 log_alfabeam: ALFABEAM 2 22.662161138810657 15.916905663199671 2009-Jul-30 02:10:16 LOG4 log_alfabeam: ALFABEAM 3 22.669324073493353 15.892567014686993 2009-Jul-30 02:10:16 LOG4 log_alfabeam: ALFABEAM 4 22.673855832191997 15.960431195798227 2009-Jul-30 02:10:16 LOG4 log_alfabeam: ALFABEAM 5 22.671125116364724 16.051034357716393 2009-Jul-30 02:10:16 LOG4 log_alfabeam: ALFABEAM 6 22.663920633755811 16.072984297610883 2009-Jul-30 02:10:16 INFO2 take_data: Starting WAPP+GALFA scan: 921100018 2009-Jul-30 02:10:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:10:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:10:17 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2009-Jul-30 02:10:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:10:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Jul-30 02:10:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:10:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:10:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:10:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22218.00 2009-Jul-30 02:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.110 (still bad) 2009-Jul-30 02:10:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:10:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.112 (still bad) 2009-Jul-30 02:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.115 (still bad) 2009-Jul-30 02:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.114 (still bad) 2009-Jul-30 02:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.113 (still bad) 2009-Jul-30 02:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.114 (still bad) 2009-Jul-30 02:10:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:10:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:10:28 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2009-Jul-30 02:10:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:10:28 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2009-Jul-30 02:10:28 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Jul-30 02:10:28 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jul-30 02:10:28 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jul-30 02:10:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-30 02:10:28 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2009-Jul-30 02:10:28 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-30 02:10:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jul-30 02:10:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-30 02:10:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-30 02:10:28 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2009-Jul-30 02:10:28 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2009-Jul-30 02:10:28 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2009-Jul-30 02:10:28 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-Jul-30 02:10:28 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:10:28 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57793 J 2009-Jul-30 02:10:28 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:10:28 LOG2 antvel: Parameters to Doppler: Topocentric 22228 2009 211 0.0 2009-Jul-30 02:10:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:10:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-Jul-30 02:10:28 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-Jul-30 02:10:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:10:28 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:10:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Jul-30 02:10:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:10:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-30 02:10:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:10:28 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2009-Jul-30 02:10:28 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.258697 2009.5779345704364 18.999933 2009-Jul-30 02:10:28 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333333 2009-Jul-30 02:10:28 LOG4 log_alfabeam: ALFABEAM 1 22.659491757949702 16.006991311863725 2009-Jul-30 02:10:28 LOG4 log_alfabeam: ALFABEAM 2 22.662149129682547 15.917077652878540 2009-Jul-30 02:10:28 LOG4 log_alfabeam: ALFABEAM 3 22.669307566567340 15.892464854696941 2009-Jul-30 02:10:28 LOG4 log_alfabeam: ALFABEAM 4 22.673851758302725 15.960166404660297 2009-Jul-30 02:10:28 LOG4 log_alfabeam: ALFABEAM 5 22.671137006049765 16.050873238489675 2009-Jul-30 02:10:28 LOG4 log_alfabeam: ALFABEAM 6 22.663936346736048 16.073081970775249 2009-Jul-30 02:10:28 INFO2 take_data: Starting WAPP+GALFA scan: 921100019 2009-Jul-30 02:10:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:10:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:10:29 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2009-Jul-30 02:10:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:10:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Jul-30 02:10:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:10:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:10:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:10:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22230.00 2009-Jul-30 02:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.112 (still bad) 2009-Jul-30 02:10:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:10:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.114 and 1.663 (still bad) 2009-Jul-30 02:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.114 and 1.665 (still bad) 2009-Jul-30 02:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.114 and 1.664 (still bad) 2009-Jul-30 02:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.114 and 1.668 (still bad) 2009-Jul-30 02:10:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.114 and 1.666 (still bad) 2009-Jul-30 02:10:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:10:40 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2009-Jul-30 02:10:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:10:40 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2009-Jul-30 02:10:40 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2009-Jul-30 02:10:40 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2009-Jul-30 02:10:40 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2009-Jul-30 02:10:40 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:10:40 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57793 J 2009-Jul-30 02:10:40 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:10:40 LOG2 antvel: Parameters to Doppler: Topocentric 22240 2009 211 0.0 2009-Jul-30 02:10:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:10:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2009-Jul-30 02:10:40 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2009-Jul-30 02:10:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:10:40 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:10:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Jul-30 02:10:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:10:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-30 02:10:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:10:40 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2009-Jul-30 02:10:40 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.262039 2009.5779349506934 18.999933 2009-Jul-30 02:10:40 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666668 15.983333333333327 2009-Jul-30 02:10:40 LOG4 log_alfabeam: ALFABEAM 1 22.659496103566710 16.007263247548764 2009-Jul-30 02:10:40 LOG4 log_alfabeam: ALFABEAM 2 22.662136979586474 15.917252580526537 2009-Jul-30 02:10:40 LOG4 log_alfabeam: ALFABEAM 3 22.669290802435906 15.892361863825862 2009-Jul-30 02:10:40 LOG4 log_alfabeam: ALFABEAM 4 22.673847577569994 15.959897938054041 2009-Jul-30 02:10:40 LOG4 log_alfabeam: ALFABEAM 5 22.671149039201779 16.050709339439667 2009-Jul-30 02:10:40 LOG4 log_alfabeam: ALFABEAM 6 22.663952304380963 16.073180477363941 2009-Jul-30 02:10:40 INFO2 take_data: Starting WAPP+GALFA scan: 921100020 2009-Jul-30 02:10:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:10:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:10:41 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2009-Jul-30 02:10:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:10:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Jul-30 02:10:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:10:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:10:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:10:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22242.00 2009-Jul-30 02:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.114 and 1.665 (still bad) 2009-Jul-30 02:10:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:10:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.559 (still bad) 2009-Jul-30 02:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.559 (still bad) 2009-Jul-30 02:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.567 (still bad) 2009-Jul-30 02:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.563 (still bad) 2009-Jul-30 02:10:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:10:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:10:52 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2009-Jul-30 02:10:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:10:52 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2009-Jul-30 02:10:52 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2009-Jul-30 02:10:52 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2009-Jul-30 02:10:52 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2009-Jul-30 02:10:52 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:10:52 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57794 J 2009-Jul-30 02:10:52 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:10:52 LOG2 antvel: Parameters to Doppler: Topocentric 22252 2009 211 0.0 2009-Jul-30 02:10:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:10:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2009-Jul-30 02:10:52 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2009-Jul-30 02:10:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:10:52 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:10:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Jul-30 02:10:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:10:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-30 02:10:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:10:52 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2009-Jul-30 02:10:52 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.265382 2009.5779353309504 18.999933 2009-Jul-30 02:10:52 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333329 2009-Jul-30 02:10:52 LOG4 log_alfabeam: ALFABEAM 1 22.659500565584025 16.007539125160054 2009-Jul-30 02:10:52 LOG4 log_alfabeam: ALFABEAM 2 22.662124679219811 15.917430620877971 2009-Jul-30 02:10:52 LOG4 log_alfabeam: ALFABEAM 3 22.669273765450420 15.892257979591363 2009-Jul-30 02:10:52 LOG4 log_alfabeam: ALFABEAM 4 22.673843284165418 15.959625565287110 2009-Jul-30 02:10:52 LOG4 log_alfabeam: ALFABEAM 5 22.671161225198620 16.050542495550722 2009-Jul-30 02:10:52 LOG4 log_alfabeam: ALFABEAM 6 22.663968521586895 16.073279878762136 2009-Jul-30 02:10:52 INFO2 take_data: Starting WAPP+GALFA scan: 921100021 2009-Jul-30 02:10:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:10:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:10:53 LOG5 begin_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2009-Jul-30 02:10:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:10:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Jul-30 02:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.559 (still bad) 2009-Jul-30 02:10:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:10:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:10:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:10:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22254.00 2009-Jul-30 02:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.552 (still bad) 2009-Jul-30 02:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.555 (still bad) 2009-Jul-30 02:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.555 (still bad) 2009-Jul-30 02:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.554 (still bad) 2009-Jul-30 02:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.554 (still bad) 2009-Jul-30 02:11:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:11:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:11:04 LOG5 end_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2009-Jul-30 02:11:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:11:04 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2009-Jul-30 02:11:04 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2009-Jul-30 02:11:04 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2009-Jul-30 02:11:04 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2009-Jul-30 02:11:04 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:11:04 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57794 J 2009-Jul-30 02:11:04 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:11:04 LOG2 antvel: Parameters to Doppler: Topocentric 22264 2009 211 0.0 2009-Jul-30 02:11:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:11:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2009-Jul-30 02:11:04 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2009-Jul-30 02:11:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:11:04 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:11:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Jul-30 02:11:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:11:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-30 02:11:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:11:04 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2009-Jul-30 02:11:04 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.268724 2009.5779357112074 18.999933 2009-Jul-30 02:11:04 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333329 2009-Jul-30 02:11:04 LOG4 log_alfabeam: ALFABEAM 1 22.659505144875194 16.007818851470596 2009-Jul-30 02:11:04 LOG4 log_alfabeam: ALFABEAM 2 22.662112233888585 15.917611739465528 2009-Jul-30 02:11:04 LOG4 log_alfabeam: ALFABEAM 3 22.669256460041368 15.892153263796319 2009-Jul-30 02:11:04 LOG4 log_alfabeam: ALFABEAM 4 22.673838877214450 15.959349377764671 2009-Jul-30 02:11:04 LOG4 log_alfabeam: ALFABEAM 5 22.671173558954347 16.050372737773692 2009-Jul-30 02:11:04 LOG4 log_alfabeam: ALFABEAM 6 22.663984994137863 16.073380117524270 2009-Jul-30 02:11:04 INFO2 take_data: Starting WAPP+GALFA scan: 921100022 2009-Jul-30 02:11:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:11:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:11:05 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2009-Jul-30 02:11:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:11:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Jul-30 02:11:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:11:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:11:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.551 (still bad) 2009-Jul-30 02:11:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22266.00 2009-Jul-30 02:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.540 (still bad) 2009-Jul-30 02:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.540 (still bad) 2009-Jul-30 02:11:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Jul-30 02:11:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.428 1.259 1.476 1.238 2009-Jul-30 02:11:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.308 1.377 1.259 1.355 2009-Jul-30 02:11:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.258 1.491 1.544 1.428 2009-Jul-30 02:11:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.284 0.112 1.410 0.136 2009-Jul-30 02:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.545 (still bad) 2009-Jul-30 02:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.539 (still bad) 2009-Jul-30 02:11:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:11:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:11:16 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2009-Jul-30 02:11:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:11:16 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2009-Jul-30 02:11:16 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2009-Jul-30 02:11:16 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2009-Jul-30 02:11:16 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2009-Jul-30 02:11:16 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:11:16 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57794 J 2009-Jul-30 02:11:16 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:11:16 LOG2 antvel: Parameters to Doppler: Topocentric 22276 2009 211 0.0 2009-Jul-30 02:11:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:11:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2009-Jul-30 02:11:16 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2009-Jul-30 02:11:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:11:16 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:11:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Jul-30 02:11:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:11:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-30 02:11:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:11:16 LOG5 begin_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2009-Jul-30 02:11:16 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.272067 2009.5779360914646 18.999933 2009-Jul-30 02:11:16 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333333 2009-Jul-30 02:11:16 LOG4 log_alfabeam: ALFABEAM 1 22.659509847850948 16.008102667300108 2009-Jul-30 02:11:16 LOG4 log_alfabeam: ALFABEAM 2 22.662099634069722 15.917796118849404 2009-Jul-30 02:11:16 LOG4 log_alfabeam: ALFABEAM 3 22.669238869935292 15.892047653962678 2009-Jul-30 02:11:16 LOG4 log_alfabeam: ALFABEAM 4 22.673834350512461 15.959069137050925 2009-Jul-30 02:11:16 LOG4 log_alfabeam: ALFABEAM 5 22.671186050083826 16.050199893596002 2009-Jul-30 02:11:16 LOG4 log_alfabeam: ALFABEAM 6 22.664001737526210 16.073481255219495 2009-Jul-30 02:11:16 INFO2 take_data: Starting WAPP+GALFA scan: 921100023 2009-Jul-30 02:11:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:11:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:11:17 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2009-Jul-30 02:11:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:11:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Jul-30 02:11:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:11:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:11:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:11:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22278.00 2009-Jul-30 02:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.542 (still bad) 2009-Jul-30 02:11:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:11:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.545 (still bad) 2009-Jul-30 02:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.541 (still bad) 2009-Jul-30 02:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.541 (still bad) 2009-Jul-30 02:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.544 (still bad) 2009-Jul-30 02:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.541 (still bad) 2009-Jul-30 02:11:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:11:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:11:28 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2009-Jul-30 02:11:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:11:28 LOG5 end_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2009-Jul-30 02:11:28 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2009-Jul-30 02:11:28 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2009-Jul-30 02:11:28 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2009-Jul-30 02:11:28 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:11:28 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57794 J 2009-Jul-30 02:11:28 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:11:28 LOG2 antvel: Parameters to Doppler: Topocentric 22288 2009 211 0.0 2009-Jul-30 02:11:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:11:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2009-Jul-30 02:11:28 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2009-Jul-30 02:11:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:11:28 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:11:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Jul-30 02:11:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:11:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-30 02:11:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:11:28 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2009-Jul-30 02:11:28 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.275409 2009.5779364717216 18.999933 2009-Jul-30 02:11:28 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333340 2009-Jul-30 02:11:28 LOG4 log_alfabeam: ALFABEAM 1 22.659514675497373 16.008390477843580 2009-Jul-30 02:11:28 LOG4 log_alfabeam: ALFABEAM 2 22.662086885205998 15.917983725025922 2009-Jul-30 02:11:28 LOG4 log_alfabeam: ALFABEAM 3 22.669220999583924 15.891941214035155 2009-Jul-30 02:11:28 LOG4 log_alfabeam: ALFABEAM 4 22.673829703074162 15.958784936068040 2009-Jul-30 02:11:28 LOG4 log_alfabeam: ALFABEAM 5 22.671198693375018 16.050023993434074 2009-Jul-30 02:11:28 LOG4 log_alfabeam: ALFABEAM 6 22.664018747517638 16.073583232447223 2009-Jul-30 02:11:28 INFO2 take_data: Starting WAPP+GALFA scan: 921100024 2009-Jul-30 02:11:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:11:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:11:29 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Jul-30 02:11:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:11:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Jul-30 02:11:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:11:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:11:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:11:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22290.00 2009-Jul-30 02:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.539 (still bad) 2009-Jul-30 02:11:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:11:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.544 (still bad) 2009-Jul-30 02:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.544 (still bad) 2009-Jul-30 02:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.544 (still bad) 2009-Jul-30 02:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.545 (still bad) 2009-Jul-30 02:11:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:11:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:11:40 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Jul-30 02:11:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:11:40 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2009-Jul-30 02:11:40 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2009-Jul-30 02:11:40 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2009-Jul-30 02:11:40 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2009-Jul-30 02:11:40 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:11:40 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57794 J 2009-Jul-30 02:11:40 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:11:40 LOG2 antvel: Parameters to Doppler: Topocentric 22300 2009 211 0.0 2009-Jul-30 02:11:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:11:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2009-Jul-30 02:11:40 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2009-Jul-30 02:11:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:11:40 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:11:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Jul-30 02:11:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:11:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-30 02:11:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:11:40 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2009-Jul-30 02:11:40 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.278752 2009.5779368519786 18.999933 2009-Jul-30 02:11:40 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333333 2009-Jul-30 02:11:40 LOG4 log_alfabeam: ALFABEAM 1 22.659519634640880 16.008682531998328 2009-Jul-30 02:11:40 LOG4 log_alfabeam: ALFABEAM 2 22.662073977551643 15.918174748837206 2009-Jul-30 02:11:40 LOG4 log_alfabeam: ALFABEAM 3 22.669202832056694 15.891833881691547 2009-Jul-30 02:11:40 LOG4 log_alfabeam: ALFABEAM 4 22.673824928290486 15.958496528324137 2009-Jul-30 02:11:40 LOG4 log_alfabeam: ALFABEAM 5 22.671211498683736 16.049844856833680 2009-Jul-30 02:11:40 LOG4 log_alfabeam: ALFABEAM 6 22.664036040231625 16.073686110832430 2009-Jul-30 02:11:40 INFO2 take_data: Starting WAPP+GALFA scan: 921100025 2009-Jul-30 02:11:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:11:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:11:41 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2009-Jul-30 02:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.545 (still bad) 2009-Jul-30 02:11:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:11:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Jul-30 02:11:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:11:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:11:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:11:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22302.00 2009-Jul-30 02:11:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:11:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.545 (still bad) 2009-Jul-30 02:11:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.545 (still bad) 2009-Jul-30 02:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.547 (still bad) 2009-Jul-30 02:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.552 (still bad) 2009-Jul-30 02:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.546 (still bad) 2009-Jul-30 02:11:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:11:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:11:52 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2009-Jul-30 02:11:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:11:52 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2009-Jul-30 02:11:52 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Jul-30 02:11:52 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Jul-30 02:11:52 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Jul-30 02:11:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jul-30 02:11:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jul-30 02:11:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-30 02:11:52 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Jul-30 02:11:52 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-30 02:11:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-30 02:11:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-30 02:11:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-30 02:11:52 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Jul-30 02:11:52 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Jul-30 02:11:52 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2009-Jul-30 02:11:52 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2009-Jul-30 02:11:52 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-Jul-30 02:11:52 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:11:52 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57794 J 2009-Jul-30 02:11:52 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:11:52 LOG2 antvel: Parameters to Doppler: Topocentric 22312 2009 211 0.0 2009-Jul-30 02:11:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:11:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-Jul-30 02:11:52 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-Jul-30 02:11:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:11:52 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:11:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Jul-30 02:11:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:11:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-30 02:11:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:11:52 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2009-Jul-30 02:11:52 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.282094 2009.5779372322356 18.999933 2009-Jul-30 02:11:52 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333343 2009-Jul-30 02:11:52 LOG4 log_alfabeam: ALFABEAM 1 22.659524726391954 16.008978733336598 2009-Jul-30 02:11:52 LOG4 log_alfabeam: ALFABEAM 2 22.662060916694170 15.918369156848858 2009-Jul-30 02:11:52 LOG4 log_alfabeam: ALFABEAM 3 22.669184371822407 15.891725723176622 2009-Jul-30 02:11:52 LOG4 log_alfabeam: ALFABEAM 4 22.673820025053651 15.958204008298441 2009-Jul-30 02:11:52 LOG4 log_alfabeam: ALFABEAM 5 22.671224460664725 16.049662513566794 2009-Jul-30 02:11:52 LOG4 log_alfabeam: ALFABEAM 6 22.664053611419739 16.073789828877008 2009-Jul-30 02:11:52 INFO2 take_data: Starting WAPP+GALFA scan: 921100026 2009-Jul-30 02:11:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:11:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:11:53 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2009-Jul-30 02:11:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:11:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Jul-30 02:11:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:11:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:11:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.546 (still bad) 2009-Jul-30 02:11:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22314.00 2009-Jul-30 02:11:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:11:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.546 (still bad) 2009-Jul-30 02:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.187 (still bad) 2009-Jul-30 02:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.188 (still bad) 2009-Jul-30 02:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.198 (still bad) 2009-Jul-30 02:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.188 (still bad) 2009-Jul-30 02:12:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:12:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:12:04 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2009-Jul-30 02:12:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:12:04 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2009-Jul-30 02:12:04 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2009-Jul-30 02:12:04 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2009-Jul-30 02:12:04 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2009-Jul-30 02:12:04 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:12:04 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57794 J 2009-Jul-30 02:12:04 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:12:04 LOG2 antvel: Parameters to Doppler: Topocentric 22324 2009 211 0.0 2009-Jul-30 02:12:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:12:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2009-Jul-30 02:12:04 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2009-Jul-30 02:12:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:12:04 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:12:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Jul-30 02:12:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:12:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-30 02:12:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:12:04 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2009-Jul-30 02:12:04 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.285437 2009.5779376124926 18.999933 2009-Jul-30 02:12:04 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333329 2009-Jul-30 02:12:04 LOG4 log_alfabeam: ALFABEAM 1 22.659529958023995 16.009279339152528 2009-Jul-30 02:12:04 LOG4 log_alfabeam: ALFABEAM 2 22.662047692663485 15.918567148671546 2009-Jul-30 02:12:04 LOG4 log_alfabeam: ALFABEAM 3 22.669165601259273 15.891616676497144 2009-Jul-30 02:12:04 LOG4 log_alfabeam: ALFABEAM 4 22.673814986319620 15.957907121119771 2009-Jul-30 02:12:04 LOG4 log_alfabeam: ALFABEAM 5 22.671237589418158 16.049476774762244 2009-Jul-30 02:12:04 LOG4 log_alfabeam: ALFABEAM 6 22.664071477861476 16.073894448114551 2009-Jul-30 02:12:04 INFO2 take_data: Starting WAPP+GALFA scan: 921100027 2009-Jul-30 02:12:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:12:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:12:05 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2009-Jul-30 02:12:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:12:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Jul-30 02:12:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:12:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:12:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.187 (still bad) 2009-Jul-30 02:12:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22326.00 2009-Jul-30 02:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.187 (still bad) 2009-Jul-30 02:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Jul-30 02:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Jul-30 02:12:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Jul-30 02:12:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.041 0.939 1.093 0.918 2009-Jul-30 02:12:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 1.011 0.924 1.002 2009-Jul-30 02:12:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.906 1.081 1.119 1.089 2009-Jul-30 02:12:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.910 0.111 1.001 0.136 2009-Jul-30 02:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Jul-30 02:12:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:12:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:12:16 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2009-Jul-30 02:12:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:12:16 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2009-Jul-30 02:12:16 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2009-Jul-30 02:12:16 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2009-Jul-30 02:12:16 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2009-Jul-30 02:12:16 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:12:16 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57794 J 2009-Jul-30 02:12:16 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:12:16 LOG2 antvel: Parameters to Doppler: Topocentric 22336 2009 211 0.0 2009-Jul-30 02:12:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:12:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2009-Jul-30 02:12:16 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2009-Jul-30 02:12:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:12:16 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:12:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Jul-30 02:12:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:12:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-30 02:12:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:12:16 LOG5 begin_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2009-Jul-30 02:12:16 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.288779 2009.5779379927499 18.999933 2009-Jul-30 02:12:16 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333333 2009-Jul-30 02:12:16 LOG4 log_alfabeam: ALFABEAM 1 22.659535330784930 16.009584251344723 2009-Jul-30 02:12:16 LOG4 log_alfabeam: ALFABEAM 2 22.662034311200745 15.918768691555449 2009-Jul-30 02:12:16 LOG4 log_alfabeam: ALFABEAM 3 22.669146524848710 15.891506810373009 2009-Jul-30 02:12:16 LOG4 log_alfabeam: ALFABEAM 4 22.673809810845242 15.957605962869987 2009-Jul-30 02:12:16 LOG4 log_alfabeam: ALFABEAM 5 22.671250879457645 16.049287669426874 2009-Jul-30 02:12:16 LOG4 log_alfabeam: ALFABEAM 6 22.664089635298943 16.073999904791531 2009-Jul-30 02:12:16 INFO2 take_data: Starting WAPP+GALFA scan: 921100028 2009-Jul-30 02:12:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:12:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:12:17 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2009-Jul-30 02:12:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:12:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Jul-30 02:12:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:12:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:12:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:12:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22338.00 2009-Jul-30 02:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Jul-30 02:12:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:12:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-Jul-30 02:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-Jul-30 02:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Jul-30 02:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Jul-30 02:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-Jul-30 02:12:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:12:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:12:28 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2009-Jul-30 02:12:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:12:28 LOG5 end_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2009-Jul-30 02:12:28 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2009-Jul-30 02:12:28 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2009-Jul-30 02:12:28 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2009-Jul-30 02:12:28 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:12:28 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57794 J 2009-Jul-30 02:12:28 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:12:28 LOG2 antvel: Parameters to Doppler: Topocentric 22348 2009 211 0.0 2009-Jul-30 02:12:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:12:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2009-Jul-30 02:12:28 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2009-Jul-30 02:12:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:12:28 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:12:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Jul-30 02:12:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:12:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-30 02:12:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:12:28 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2009-Jul-30 02:12:28 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.292122 2009.5779383730069 18.999933 2009-Jul-30 02:12:28 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333336 2009-Jul-30 02:12:28 LOG4 log_alfabeam: ALFABEAM 1 22.659540852429107 16.009893735932810 2009-Jul-30 02:12:28 LOG4 log_alfabeam: ALFABEAM 2 22.662020762110629 15.918973994399094 2009-Jul-30 02:12:28 LOG4 log_alfabeam: ALFABEAM 3 22.669127124241584 15.891396063337382 2009-Jul-30 02:12:28 LOG4 log_alfabeam: ALFABEAM 4 22.673804491118236 15.957300269965359 2009-Jul-30 02:12:28 LOG4 log_alfabeam: ALFABEAM 5 22.671264341130588 16.049094999764492 2009-Jul-30 02:12:28 LOG4 log_alfabeam: ALFABEAM 6 22.664108101206395 16.074106260181431 2009-Jul-30 02:12:28 INFO2 take_data: Starting WAPP+GALFA scan: 921100029 2009-Jul-30 02:12:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:12:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:12:29 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2009-Jul-30 02:12:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:12:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Jul-30 02:12:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:12:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:12:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:12:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22350.00 2009-Jul-30 02:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-Jul-30 02:12:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:12:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.104 (still bad) 2009-Jul-30 02:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.104 (still bad) 2009-Jul-30 02:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Jul-30 02:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Jul-30 02:12:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:12:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:12:40 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2009-Jul-30 02:12:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:12:40 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2009-Jul-30 02:12:40 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2009-Jul-30 02:12:40 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2009-Jul-30 02:12:40 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2009-Jul-30 02:12:40 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:12:40 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57794 J 2009-Jul-30 02:12:40 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:12:40 LOG2 antvel: Parameters to Doppler: Topocentric 22360 2009 211 0.0 2009-Jul-30 02:12:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:12:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2009-Jul-30 02:12:40 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2009-Jul-30 02:12:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:12:40 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:12:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Jul-30 02:12:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:12:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-30 02:12:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:12:40 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2009-Jul-30 02:12:40 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.295464 2009.5779387532639 18.999933 2009-Jul-30 02:12:40 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333333 2009-Jul-30 02:12:40 LOG4 log_alfabeam: ALFABEAM 1 22.659546524356269 16.010207693083451 2009-Jul-30 02:12:40 LOG4 log_alfabeam: ALFABEAM 2 22.662007051297927 15.919183025263022 2009-Jul-30 02:12:40 LOG4 log_alfabeam: ALFABEAM 3 22.669107403927189 15.891284506779238 2009-Jul-30 02:12:40 LOG4 log_alfabeam: ALFABEAM 4 22.673799025745964 15.956990140142603 2009-Jul-30 02:12:40 LOG4 log_alfabeam: ALFABEAM 5 22.671277968800599 16.048898793884874 2009-Jul-30 02:12:40 LOG4 log_alfabeam: ALFABEAM 6 22.664126871321471 16.074213448100355 2009-Jul-30 02:12:40 INFO2 take_data: Starting WAPP+GALFA scan: 921100030 2009-Jul-30 02:12:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:12:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:12:41 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2009-Jul-30 02:12:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:12:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Jul-30 02:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.104 (still bad) 2009-Jul-30 02:12:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:12:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:12:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:12:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22362.00 2009-Jul-30 02:12:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:12:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.104 (still bad) 2009-Jul-30 02:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Jul-30 02:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Jul-30 02:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.105 (still bad) 2009-Jul-30 02:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Jul-30 02:12:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:12:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:12:52 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2009-Jul-30 02:12:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:12:52 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2009-Jul-30 02:12:52 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2009-Jul-30 02:12:52 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2009-Jul-30 02:12:52 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2009-Jul-30 02:12:52 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:12:52 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57794 J 2009-Jul-30 02:12:52 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:12:52 LOG2 antvel: Parameters to Doppler: Topocentric 22372 2009 211 0.0 2009-Jul-30 02:12:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:12:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2009-Jul-30 02:12:52 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2009-Jul-30 02:12:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:12:52 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:12:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Jul-30 02:12:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:12:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-30 02:12:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:12:52 LOG5 begin_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2009-Jul-30 02:12:52 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.298806 2009.5779391335209 18.999933 2009-Jul-30 02:12:52 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333343 2009-Jul-30 02:12:52 LOG4 log_alfabeam: ALFABEAM 1 22.659552353070520 16.010526301839533 2009-Jul-30 02:12:52 LOG4 log_alfabeam: ALFABEAM 2 22.661993172520308 15.919395938588719 2009-Jul-30 02:12:52 LOG4 log_alfabeam: ALFABEAM 3 22.669087350841792 15.891172113737982 2009-Jul-30 02:12:52 LOG4 log_alfabeam: ALFABEAM 4 22.673793408415968 15.956675395640579 2009-Jul-30 02:12:52 LOG4 log_alfabeam: ALFABEAM 5 22.671291768909057 16.048698904895215 2009-Jul-30 02:12:52 LOG4 log_alfabeam: ALFABEAM 6 22.664145958090753 16.074321496909491 2009-Jul-30 02:12:52 INFO2 take_data: Starting WAPP+GALFA scan: 921100031 2009-Jul-30 02:12:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:12:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:12:53 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2009-Jul-30 02:12:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:12:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Jul-30 02:12:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:12:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:12:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.105 (still bad) 2009-Jul-30 02:12:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22374.00 2009-Jul-30 02:12:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:12:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.109 (still bad) 2009-Jul-30 02:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.108 (still bad) 2009-Jul-30 02:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.109 (still bad) 2009-Jul-30 02:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.112 (still bad) 2009-Jul-30 02:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.105 (still bad) 2009-Jul-30 02:13:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:13:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:13:04 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2009-Jul-30 02:13:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:13:04 LOG5 end_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2009-Jul-30 02:13:04 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2009-Jul-30 02:13:04 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2009-Jul-30 02:13:04 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2009-Jul-30 02:13:04 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:13:04 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57794 J 2009-Jul-30 02:13:04 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:13:04 LOG2 antvel: Parameters to Doppler: Topocentric 22384 2009 211 0.0 2009-Jul-30 02:13:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:13:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2009-Jul-30 02:13:04 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2009-Jul-30 02:13:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:13:04 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:13:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Jul-30 02:13:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:13:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-30 02:13:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:13:04 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2009-Jul-30 02:13:04 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.302149 2009.5779395137779 18.999933 2009-Jul-30 02:13:04 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666654 15.983333333333336 2009-Jul-30 02:13:04 LOG4 log_alfabeam: ALFABEAM 1 22.659558345443376 16.010849748687818 2009-Jul-30 02:13:04 LOG4 log_alfabeam: ALFABEAM 2 22.661979119322645 15.919612896280908 2009-Jul-30 02:13:04 LOG4 log_alfabeam: ALFABEAM 3 22.669066951324840 15.891058857221720 2009-Jul-30 02:13:04 LOG4 log_alfabeam: ALFABEAM 4 22.673787632458289 15.956355851277587 2009-Jul-30 02:13:04 LOG4 log_alfabeam: ALFABEAM 5 22.671305748125732 16.048495178749423 2009-Jul-30 02:13:04 LOG4 log_alfabeam: ALFABEAM 6 22.664165374530551 16.074430435177664 2009-Jul-30 02:13:04 INFO2 take_data: Starting WAPP+GALFA scan: 921100032 2009-Jul-30 02:13:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:13:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:13:05 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2009-Jul-30 02:13:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:13:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Jul-30 02:13:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:13:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:13:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:13:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22386.00 2009-Jul-30 02:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.107 (still bad) 2009-Jul-30 02:13:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:13:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.108 (still bad) 2009-Jul-30 02:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.108 (still bad) 2009-Jul-30 02:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.110 (still bad) 2009-Jul-30 02:13:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Jul-30 02:13:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.038 0.926 1.092 0.908 2009-Jul-30 02:13:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 0.987 0.912 0.991 2009-Jul-30 02:13:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.909 1.080 1.109 1.066 2009-Jul-30 02:13:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.112 1.011 0.137 2009-Jul-30 02:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.107 (still bad) 2009-Jul-30 02:13:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:13:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:13:16 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2009-Jul-30 02:13:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:13:16 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2009-Jul-30 02:13:16 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Jul-30 02:13:16 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jul-30 02:13:16 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jul-30 02:13:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-30 02:13:16 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2009-Jul-30 02:13:16 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-30 02:13:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jul-30 02:13:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-30 02:13:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-30 02:13:16 LOG5 end_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2009-Jul-30 02:13:16 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2009-Jul-30 02:13:16 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2009-Jul-30 02:13:16 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-Jul-30 02:13:16 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:13:16 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57794 J 2009-Jul-30 02:13:16 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:13:16 LOG2 antvel: Parameters to Doppler: Topocentric 22396 2009 211 0.0 2009-Jul-30 02:13:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:13:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-Jul-30 02:13:16 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-Jul-30 02:13:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:13:16 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:13:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Jul-30 02:13:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:13:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-30 02:13:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:13:16 LOG5 begin_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2009-Jul-30 02:13:16 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.305491 2009.5779398940351 18.999933 2009-Jul-30 02:13:16 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333329 2009-Jul-30 02:13:16 LOG4 log_alfabeam: ALFABEAM 1 22.659564503132490 16.011177931068080 2009-Jul-30 02:13:16 LOG4 log_alfabeam: ALFABEAM 2 22.661964897876352 15.919833867876051 2009-Jul-30 02:13:16 LOG4 log_alfabeam: ALFABEAM 3 22.669046209867783 15.890944813033281 2009-Jul-30 02:13:16 LOG4 log_alfabeam: ALFABEAM 4 22.673781696226268 15.956031607389038 2009-Jul-30 02:13:16 LOG4 log_alfabeam: ALFABEAM 5 22.671319900570353 16.048287641937598 2009-Jul-30 02:13:16 LOG4 log_alfabeam: ALFABEAM 6 22.664185116381876 16.074540192705310 2009-Jul-30 02:13:16 INFO2 take_data: Starting WAPP+GALFA scan: 921100033 2009-Jul-30 02:13:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:13:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:13:17 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2009-Jul-30 02:13:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:13:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Jul-30 02:13:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:13:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:13:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:13:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22398.00 2009-Jul-30 02:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.104 (still bad) 2009-Jul-30 02:13:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:13:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.114 and 1.656 (still bad) 2009-Jul-30 02:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.658 (still bad) 2009-Jul-30 02:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.664 (still bad) 2009-Jul-30 02:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.661 (still bad) 2009-Jul-30 02:13:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.659 (still bad) 2009-Jul-30 02:13:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:13:28 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2009-Jul-30 02:13:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:13:28 LOG5 end_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2009-Jul-30 02:13:28 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2009-Jul-30 02:13:28 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2009-Jul-30 02:13:28 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2009-Jul-30 02:13:28 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:13:28 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57794 J 2009-Jul-30 02:13:28 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:13:28 LOG2 antvel: Parameters to Doppler: Topocentric 22408 2009 211 0.0 2009-Jul-30 02:13:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:13:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2009-Jul-30 02:13:28 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2009-Jul-30 02:13:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:13:28 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:13:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Jul-30 02:13:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:13:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-30 02:13:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:13:28 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2009-Jul-30 02:13:28 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.308834 2009.5779402742921 18.999933 2009-Jul-30 02:13:28 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333340 2009-Jul-30 02:13:28 LOG4 log_alfabeam: ALFABEAM 1 22.659570835262524 16.011511138305899 2009-Jul-30 02:13:28 LOG4 log_alfabeam: ALFABEAM 2 22.661950497425618 15.920059087997041 2009-Jul-30 02:13:28 LOG4 log_alfabeam: ALFABEAM 3 22.669025106131745 15.890829922073786 2009-Jul-30 02:13:28 LOG4 log_alfabeam: ALFABEAM 4 22.673775590872733 15.955702377091981 2009-Jul-30 02:13:28 LOG4 log_alfabeam: ALFABEAM 5 22.671334237215593 16.048076071892794 2009-Jul-30 02:13:28 LOG4 log_alfabeam: ALFABEAM 6 22.664205203021588 16.074650829209677 2009-Jul-30 02:13:28 INFO2 take_data: Starting WAPP+GALFA scan: 921100034 2009-Jul-30 02:13:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:13:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:13:29 LOG5 begin_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2009-Jul-30 02:13:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:13:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Jul-30 02:13:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:13:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:13:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:13:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22410.00 2009-Jul-30 02:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.656 (still bad) 2009-Jul-30 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.553 (still bad) 2009-Jul-30 02:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.553 (still bad) 2009-Jul-30 02:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.558 (still bad) 2009-Jul-30 02:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.550 (still bad) 2009-Jul-30 02:13:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:13:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:13:40 LOG5 end_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2009-Jul-30 02:13:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:13:40 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2009-Jul-30 02:13:40 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2009-Jul-30 02:13:40 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2009-Jul-30 02:13:40 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2009-Jul-30 02:13:40 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:13:40 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57794 J 2009-Jul-30 02:13:40 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:13:40 LOG2 antvel: Parameters to Doppler: Topocentric 22420 2009 211 0.0 2009-Jul-30 02:13:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:13:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2009-Jul-30 02:13:40 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2009-Jul-30 02:13:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:13:40 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:13:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Jul-30 02:13:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:13:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-30 02:13:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:13:40 LOG5 begin_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2009-Jul-30 02:13:40 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.312176 2009.5779406545491 18.999933 2009-Jul-30 02:13:40 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333340 2009-Jul-30 02:13:40 LOG4 log_alfabeam: ALFABEAM 1 22.659577343685488 16.011849265920574 2009-Jul-30 02:13:40 LOG4 log_alfabeam: ALFABEAM 2 22.661935924335641 15.920288527355037 2009-Jul-30 02:13:40 LOG4 log_alfabeam: ALFABEAM 3 22.669003644602792 15.890714263397861 2009-Jul-30 02:13:40 LOG4 log_alfabeam: ALFABEAM 4 22.673769314559500 15.955368262546999 2009-Jul-30 02:13:40 LOG4 log_alfabeam: ALFABEAM 5 22.671348752004164 16.047860493823414 2009-Jul-30 02:13:40 LOG4 log_alfabeam: ALFABEAM 6 22.664225630200207 16.074762271534645 2009-Jul-30 02:13:40 INFO2 take_data: Starting WAPP+GALFA scan: 921100035 2009-Jul-30 02:13:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:13:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:13:41 LOG5 begin_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2009-Jul-30 02:13:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:13:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Jul-30 02:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.553 (still bad) 2009-Jul-30 02:13:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:13:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:13:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:13:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22422.00 2009-Jul-30 02:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.553 (still bad) 2009-Jul-30 02:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.549 (still bad) 2009-Jul-30 02:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.547 (still bad) 2009-Jul-30 02:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.554 (still bad) 2009-Jul-30 02:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.548 (still bad) 2009-Jul-30 02:13:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:13:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:13:52 LOG5 end_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2009-Jul-30 02:13:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:13:52 LOG5 end_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2009-Jul-30 02:13:52 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2009-Jul-30 02:13:52 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2009-Jul-30 02:13:52 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2009-Jul-30 02:13:52 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:13:52 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57794 J 2009-Jul-30 02:13:52 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:13:52 LOG2 antvel: Parameters to Doppler: Topocentric 22432 2009 211 0.0 2009-Jul-30 02:13:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:13:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2009-Jul-30 02:13:52 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2009-Jul-30 02:13:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:13:52 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:13:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Jul-30 02:13:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:13:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-30 02:13:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:13:52 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2009-Jul-30 02:13:52 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.315519 2009.5779410348061 18.999933 2009-Jul-30 02:13:52 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333340 2009-Jul-30 02:13:52 LOG4 log_alfabeam: ALFABEAM 1 22.659584038150197 16.012192613175181 2009-Jul-30 02:13:52 LOG4 log_alfabeam: ALFABEAM 2 22.661921167630748 15.920522431967033 2009-Jul-30 02:13:52 LOG4 log_alfabeam: ALFABEAM 3 22.668981804071805 15.890597779363045 2009-Jul-30 02:13:52 LOG4 log_alfabeam: ALFABEAM 4 22.673762857831033 15.955028966923322 2009-Jul-30 02:13:52 LOG4 log_alfabeam: ALFABEAM 5 22.671363456159053 16.047640674166843 2009-Jul-30 02:13:52 LOG4 log_alfabeam: ALFABEAM 6 22.664246418127590 16.074874578333635 2009-Jul-30 02:13:52 INFO2 take_data: Starting WAPP+GALFA scan: 921100036 2009-Jul-30 02:13:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:13:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:13:53 LOG5 begin_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2009-Jul-30 02:13:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:13:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Jul-30 02:13:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:13:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:13:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.547 (still bad) 2009-Jul-30 02:13:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22434.00 2009-Jul-30 02:13:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:13:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.547 (still bad) 2009-Jul-30 02:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.532 (still bad) 2009-Jul-30 02:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.540 (still bad) 2009-Jul-30 02:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.548 (still bad) 2009-Jul-30 02:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.535 (still bad) 2009-Jul-30 02:14:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:14:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:14:04 LOG5 end_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2009-Jul-30 02:14:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:14:04 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2009-Jul-30 02:14:04 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2009-Jul-30 02:14:04 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2009-Jul-30 02:14:04 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2009-Jul-30 02:14:04 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:14:04 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57794 J 2009-Jul-30 02:14:04 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:14:04 LOG2 antvel: Parameters to Doppler: Topocentric 22444 2009 211 0.0 2009-Jul-30 02:14:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:14:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2009-Jul-30 02:14:04 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2009-Jul-30 02:14:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:14:04 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:14:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Jul-30 02:14:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:14:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-30 02:14:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:14:04 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2009-Jul-30 02:14:04 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.318861 2009.5779414150634 18.999933 2009-Jul-30 02:14:04 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333333 2009-Jul-30 02:14:04 LOG4 log_alfabeam: ALFABEAM 1 22.659590920723058 16.012541073570862 2009-Jul-30 02:14:04 LOG4 log_alfabeam: ALFABEAM 2 22.661906233884707 15.920760773886007 2009-Jul-30 02:14:04 LOG4 log_alfabeam: ALFABEAM 3 22.668959589013760 15.890480552555307 2009-Jul-30 02:14:04 LOG4 log_alfabeam: ALFABEAM 4 22.673756218637852 15.954684594295768 2009-Jul-30 02:14:04 LOG4 log_alfabeam: ALFABEAM 5 22.671378343432796 16.047416636672224 2009-Jul-30 02:14:04 LOG4 log_alfabeam: ALFABEAM 6 22.664267562570004 16.074987673241367 2009-Jul-30 02:14:04 INFO2 take_data: Starting WAPP+GALFA scan: 921100037 2009-Jul-30 02:14:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:14:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:14:05 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2009-Jul-30 02:14:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:14:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Jul-30 02:14:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:14:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:14:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:14:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22446.00 2009-Jul-30 02:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.537 (still bad) 2009-Jul-30 02:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.538 (still bad) 2009-Jul-30 02:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.539 (still bad) 2009-Jul-30 02:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.549 (still bad) 2009-Jul-30 02:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.539 (still bad) 2009-Jul-30 02:14:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Jul-30 02:14:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.416 1.245 1.471 1.223 2009-Jul-30 02:14:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.302 1.361 1.256 1.349 2009-Jul-30 02:14:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.258 1.483 1.539 1.418 2009-Jul-30 02:14:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.284 0.111 1.410 0.136 2009-Jul-30 02:14:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:14:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:14:16 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2009-Jul-30 02:14:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:14:16 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2009-Jul-30 02:14:16 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2009-Jul-30 02:14:16 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2009-Jul-30 02:14:16 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2009-Jul-30 02:14:16 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:14:16 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57794 J 2009-Jul-30 02:14:16 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:14:16 LOG2 antvel: Parameters to Doppler: Topocentric 22456 2009 211 0.0 2009-Jul-30 02:14:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:14:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2009-Jul-30 02:14:16 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2009-Jul-30 02:14:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:14:16 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:14:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Jul-30 02:14:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:14:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-30 02:14:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:14:16 LOG5 begin_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2009-Jul-30 02:14:16 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.322204 2009.5779417953204 18.999933 2009-Jul-30 02:14:16 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333333 2009-Jul-30 02:14:16 LOG4 log_alfabeam: ALFABEAM 1 22.659598001826023 16.012894956666266 2009-Jul-30 02:14:16 LOG4 log_alfabeam: ALFABEAM 2 22.661891111906694 15.921003811217128 2009-Jul-30 02:14:16 LOG4 log_alfabeam: ALFABEAM 3 22.668936977303403 15.890362527138926 2009-Jul-30 02:14:16 LOG4 log_alfabeam: ALFABEAM 4 22.673749386867982 15.954334837518424 2009-Jul-30 02:14:16 LOG4 log_alfabeam: ALFABEAM 5 22.671393425296841 16.047188136095585 2009-Jul-30 02:14:16 LOG4 log_alfabeam: ALFABEAM 6 22.664289084614879 16.075101613542188 2009-Jul-30 02:14:16 INFO2 take_data: Starting WAPP+GALFA scan: 921100038 2009-Jul-30 02:14:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:14:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:14:17 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2009-Jul-30 02:14:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:14:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Jul-30 02:14:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:14:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:14:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:14:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22458.00 2009-Jul-30 02:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.539 (still bad) 2009-Jul-30 02:14:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:14:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:14:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:14:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:14:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:14:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:14:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:14:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:14:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.542 (still bad) 2009-Jul-30 02:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.542 (still bad) 2009-Jul-30 02:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.549 (still bad) 2009-Jul-30 02:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.542 (still bad) 2009-Jul-30 02:14:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:14:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:14:28 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2009-Jul-30 02:14:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:14:28 LOG5 end_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2009-Jul-30 02:14:28 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2009-Jul-30 02:14:28 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2009-Jul-30 02:14:28 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2009-Jul-30 02:14:28 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:14:28 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57794 J 2009-Jul-30 02:14:28 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:14:28 LOG2 antvel: Parameters to Doppler: Topocentric 22468 2009 211 0.0 2009-Jul-30 02:14:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:14:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2009-Jul-30 02:14:28 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2009-Jul-30 02:14:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:14:28 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:14:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Jul-30 02:14:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:14:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-30 02:14:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-30 02:14:28 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2009-Jul-30 02:14:28 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 22.325546 2009.5779421755774 18.999933 2009-Jul-30 02:14:28 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333343 2009-Jul-30 02:14:28 LOG4 log_alfabeam: ALFABEAM 1 22.659605283761952 16.013254153829891 2009-Jul-30 02:14:28 LOG4 log_alfabeam: ALFABEAM 2 22.661875808495534 15.921251517535048 2009-Jul-30 02:14:28 LOG4 log_alfabeam: ALFABEAM 3 22.668913973398695 15.890243789541927 2009-Jul-30 02:14:28 LOG4 log_alfabeam: ALFABEAM 4 22.673742360238887 15.953979802684822 2009-Jul-30 02:14:28 LOG4 log_alfabeam: ALFABEAM 5 22.671408695298691 16.046955194534341 2009-Jul-30 02:14:28 LOG4 log_alfabeam: ALFABEAM 6 22.664310980050651 16.075216319380317 2009-Jul-30 02:14:28 INFO2 take_data: Starting WAPP+GALFA scan: 921100039 2009-Jul-30 02:14:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-30 02:14:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-30 02:14:29 LOG5 begin_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2009-Jul-30 02:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.540 (still bad) 2009-Jul-30 02:14:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:14:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Jul-30 02:14:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:14:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:14:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:14:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22470.00 2009-Jul-30 02:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.545 (still bad) 2009-Jul-30 02:14:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.545 (still bad) 2009-Jul-30 02:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.544 (still bad) 2009-Jul-30 02:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.545 (still bad) 2009-Jul-30 02:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.542 (still bad) 2009-Jul-30 02:14:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:14:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-30 02:14:40 LOG5 end_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2009-Jul-30 02:14:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-30 02:14:40 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2009-Jul-30 02:14:40 INFO2 smartfreq: Switching off CAL 2009-Jul-30 02:14:40 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jul-30 02:14:40 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jul-30 02:14:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-30 02:14:40 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2009-Jul-30 02:14:40 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-30 02:14:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-30 02:14:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-30 02:14:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-30 02:14:40 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2009-Jul-30 02:14:40 INFO3 restore_frequencies: Restoring original frequencies 2009-Jul-30 02:14:40 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-30 02:14:40 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.57794 J 2009-Jul-30 02:14:40 LOG2 antvel: Computed apparent RA = 22:40:30.2 Dec = +16:02:06.6 2009-Jul-30 02:14:40 LOG2 antvel: Parameters to Doppler: Topocentric 22480 2009 211 0.0 2009-Jul-30 02:14:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-30 02:14:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2009-Jul-30 02:14:40 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2009-Jul-30 02:14:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:14:40 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:14:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2009-Jul-30 02:14:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:14:40 STOP finish_task: Finishing task 'smart frequency switching' 2009-Jul-30 02:14:40 LOG5 finish_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2009-Jul-30 02:14:40 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Jul-30 02:14:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 02:14:40 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Jul-30 02:14:40 LOG5 end_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2009-Jul-30 02:14:40 NOTE run_command_file: DONE with command file processing 2009-Jul-30 02:14:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Jul-30 02:14:40 STOP finish_task: Finishing task 'running command file 'command_galfasrc.cmd'' 2009-Jul-30 02:14:40 LOG5 finish_task: Level: (1) ID = <10110> Status = 0 0 0 0 ok 2009-Jul-30 02:14:40 DONE finish_task: DONE finished running: command file 'command_galfasrc.cmd' 2009-Jul-30 02:14:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 02:14:41 END end_task: Finishing task 'running command file 'command_galfasrc.cmd'' with status 'OK' 2009-Jul-30 02:14:41 LOG5 end_task: Level: (1) ID = <10110> Status = 0 0 0 0 ok 2009-Jul-30 02:14:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2009-Jul-30 02:14:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:14:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:14:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.546 (still bad) 2009-Jul-30 02:14:59 INFO1 CIMA-run_command_file: Transferring command file '090730.cmd ' to executive ... 2009-Jul-30 02:14:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2009-Jul-30 02:14:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2009-Jul-30 02:14:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 5 {CATALOG AGESFull.cat} 2009-Jul-30 02:14:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF LSTSLEW(AGES7448_p1_023) < 222229 THEN} 2009-Jul-30 02:14:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {FIXEDDRIFT az=276.34 alfaangle=-80.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_023 ra=225000.00 dec=172600.00} 2009-Jul-30 02:14:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {ENDIF} 2009-Jul-30 02:14:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 15 {IF LSTSLEW(AGES7448_p1_059) < 224529 THEN} 2009-Jul-30 02:14:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 16 {FIXEDDRIFT az=325.78 alfaangle=49.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_059 ra=225000.00 dec=163200.00} 2009-Jul-30 02:14:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 19 {ENDIF} 2009-Jul-30 02:14:59 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Jul-30 02:14:59 LOG4 exec_msg: From OBSERVER: run_command_file 090730.cmd 1 1 9 2009-Jul-30 02:14:59 LOG4 run_command_file: Calling 'run_command_file 090730.cmd 1 1 9' 2009-Jul-30 02:14:59 BEGIN begin_task: Starting task 'running command file '090730.cmd'' 2009-Jul-30 02:14:59 LOG5 begin_task: Level: (1) ID = <10196> Status = 0 0 0 0 ok 2009-Jul-30 02:14:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '090730.cmd' ...} 2009-Jul-30 02:14:59 NOTE run_command_file: Starting execution of command file '090730.cmd' from line 1 2009-Jul-30 02:14:59 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2009-Jul-30 02:14:59 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Jul-30 02:14:59 NOTE CIMA-check_config_file: File 'ages_config.conf' contains an ALFA set-up which will be ignored! 2009-Jul-30 02:14:59 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-30 02:14:59 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Jul-30 02:14:59 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2009-Jul-30 02:15:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Jul-30 02:15:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Jul-30 02:15:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Jul-30 02:15:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Jul-30 02:15:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Jul-30 02:15:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Jul-30 02:15:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Jul-30 02:15:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Jul-30 02:15:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Jul-30 02:15:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Jul-30 02:15:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Jul-30 02:15:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jul-30 02:15:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jul-30 02:15:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jul-30 02:15:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jul-30 02:15:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Jul-30 02:15:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Jul-30 02:15:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Jul-30 02:15:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Jul-30 02:15:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Jul-30 02:15:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Jul-30 02:15:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Jul-30 02:15:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Jul-30 02:15:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jul-30 02:15:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jul-30 02:15:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jul-30 02:15:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jul-30 02:15:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Jul-30 02:15:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Jul-30 02:15:02 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Jul-30 02:15:02 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-30 02:15:02 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Jul-30 02:15:02 LOG5 begin_task: Level: (2) ID = <10197> Status = 0 0 0 0 ok 2009-Jul-30 02:15:02 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Jul-30 02:15:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Jul-30 02:15:02 LOG1 config_iflo: Receiver ALFA already selected 2009-Jul-30 02:15:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-30 02:15:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jul-30 02:15:02 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-30 02:15:02 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2009-Jul-30 02:15:02 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-30 02:15:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-30 02:15:02 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2009-Jul-30 02:15:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-30 02:15:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jul-30 02:15:02 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Jul-30 02:15:02 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Jul-30 02:15:02 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Jul-30 02:15:02 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Jul-30 02:15:02 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Jul-30 02:15:02 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Jul-30 02:15:02 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Jul-30 02:15:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2009-Jul-30 02:15:02 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Jul-30 02:15:02 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Jul-30 02:15:02 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Jul-30 02:15:02 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Jul-30 02:15:02 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Jul-30 02:15:02 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Jul-30 02:15:02 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Jul-30 02:15:02 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Jul-30 02:15:02 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Jul-30 02:15:02 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Jul-30 02:15:02 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Jul-30 02:15:02 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Jul-30 02:15:02 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Jul-30 02:15:02 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Jul-30 02:15:02 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Jul-30 02:15:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:15:02 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Jul-30 02:15:02 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Jul-30 02:15:02 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Jul-30 02:15:02 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Jul-30 02:15:02 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Jul-30 02:15:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Jul-30 02:15:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:15:02 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Jul-30 02:15:02 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2009-Jul-30 02:15:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2009-Jul-30 02:15:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Jul-30 02:15:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:15:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:15:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:15:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:15:03 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Jul-30 02:15:03 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Jul-30 02:15:03 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2009-Jul-30 02:15:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Jul-30 02:15:03 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Jul-30 02:15:03 LOG5 finish_task: Level: (2) ID = <10197> Status = 0 0 0 0 ok 2009-Jul-30 02:15:03 DONE finish_task: DONE finished configuration: IF/LO path 2009-Jul-30 02:15:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 02:15:03 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Jul-30 02:15:03 LOG5 end_task: Level: (2) ID = <10197> Status = 0 0 0 0 ok 2009-Jul-30 02:15:03 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Jul-30 02:15:03 LOG5 begin_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2009-Jul-30 02:15:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Jul-30 02:15:03 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Jul-30 02:15:03 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Jul-30 02:15:03 START begin_task: Starting task 'selecting calibration port' 2009-Jul-30 02:15:03 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2009-Jul-30 02:15:03 LOG3 vw_send: To DATATAKING: calport 3 2009-Jul-30 02:15:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Jul-30 02:15:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:15:03 START begin_task: Starting task 'waiting on calport' 2009-Jul-30 02:15:03 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2009-Jul-30 02:15:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:15:03 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Jul-30 02:15:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:15:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:15:03 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-30 02:15:03 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Jul-30 02:15:03 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2009-Jul-30 02:15:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Jul-30 02:15:03 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Jul-30 02:15:03 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2009-Jul-30 02:15:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jul-30 02:15:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jul-30 02:15:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-30 02:15:03 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2009-Jul-30 02:15:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:15:04 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-30 02:15:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-30 02:15:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-30 02:15:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-30 02:15:04 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2009-Jul-30 02:15:04 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Jul-30 02:15:04 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Jul-30 02:15:04 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Jul-30 02:15:04 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Jul-30 02:15:04 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Jul-30 02:15:04 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Jul-30 02:15:04 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Jul-30 02:15:04 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Jul-30 02:15:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2009-Jul-30 02:15:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2009-Jul-30 02:15:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2009-Jul-30 02:15:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2009-Jul-30 02:15:04 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Jul-30 02:15:04 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Jul-30 02:15:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-30 02:15:04 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2009-Jul-30 02:15:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Jul-30 02:15:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Jul-30 02:15:04 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-30 02:15:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Jul-30 02:15:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-30 02:15:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-30 02:15:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-30 02:15:04 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2009-Jul-30 02:15:04 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Jul-30 02:15:04 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Jul-30 02:15:04 LOG5 finish_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2009-Jul-30 02:15:04 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Jul-30 02:15:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-30 02:15:04 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Jul-30 02:15:04 LOG5 end_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2009-Jul-30 02:15:04 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2009-Jul-30 02:15:04 COMMAND run_command_line: EXECUTING command 5: 'CATALOG AGESFull.cat' 2009-Jul-30 02:15:04 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2009-Jul-30 02:15:04 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGES7448_p1_023) < 222229 THEN' 2009-Jul-30 02:15:05 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p1_023) < 222229 2009-Jul-30 02:15:05 INFO5 is_if_valid: Condition parsed as: 22.348907333333333 < 22.374722222222221 2009-Jul-30 02:15:05 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=276.34 alfaangle=-80.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_023 ra=225000.00 dec=172600.00' 2009-Jul-30 02:15:05 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-Jul-30 02:15:05 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Jul-30 02:15:05 WARNING check_obsmode: WARNING failed to get a response from the CIMA frontend when checking options for 'fixed azimuth drift map'! 2009-Jul-30 02:15:05 NOTE check_obsmode: Assuming that the options are OK 2009-Jul-30 02:15:05 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 276.34 -80.8 hcorcal 5 tracking no first 1 AGES7448_p1_023 225000.00 172600.00 J 8500.0 Heliocentric velocity(optical)' 2009-Jul-30 02:15:05 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Jul-30 02:15:05 LOG5 begin_task: Level: (2) ID = <10205> Status = 0 0 0 0 ok 2009-Jul-30 02:15:05 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2009-Jul-30 02:15:05 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Jul-30 02:15:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p1_023} 2009-Jul-30 02:15:05 INFO3 fixed_driftmap: Sending telescope to Az = 276.34 and ZA = 6.71 2009-Jul-30 02:15:05 LOG3 track_source: Calling 'track_source AGES7448_p1_023 276.34 6.7142046066 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Jul-30 02:15:05 START begin_task: Starting task 'sending tracking commands' 2009-Jul-30 02:15:05 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2009-Jul-30 02:15:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_023} INFO {Slewing to source 'AGES7448_p1_023' ...} 2009-Jul-30 02:15:05 INFO1 track_source: Starting to track AGES7448_p1_023 2009-Jul-30 02:15:05 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_023" 2009-Jul-30 02:15:05 LOG3 vw_send: To DATATAKING: set ra 276.34 2009-Jul-30 02:15:05 LOG3 vw_send: To DATATAKING: set dec 6.7142046066 2009-Jul-30 02:15:05 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-30 02:15:05 LOG3 vw_send: To DATATAKING: pnt tr 276.34 6.7142046066 -CF 2009-Jul-30 02:15:05 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Jul-30 02:15:05 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-30 02:15:05 LOG5 finish_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2009-Jul-30 02:15:05 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jul-30 02:15:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 02:15:05 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jul-30 02:15:05 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2009-Jul-30 02:15:05 START begin_task: Starting task 'rotate ALFA to -80.8 degrees' 2009-Jul-30 02:15:05 LOG5 begin_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2009-Jul-30 02:15:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -80.8 degrees ...} 2009-Jul-30 02:15:05 INFO2 rotate_alfa: ALFA commanded to -80.8 degrees 2009-Jul-30 02:15:05 LOG3 sock_errsend: To ALFAMOTOR: POSITION -80.8 REPLY 2009-Jul-30 02:15:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Jul-30 02:15:05 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Jul-30 02:15:05 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2009-Jul-30 02:15:05 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-30 02:15:05 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_023" 2009-Jul-30 02:15:05 LOG4 got_cormsg: From DATATAKING: set ra 276.34 2009-Jul-30 02:15:05 LOG4 got_cormsg: From DATATAKING: vw% 276.34 2009-Jul-30 02:15:05 LOG4 got_cormsg: From DATATAKING: 2009-Jul-30 02:15:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:15:05 LOG4 got_cormsg: From DATATAKING: set dec 6.7142046066 2009-Jul-30 02:15:05 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-30 02:15:05 LOG4 got_cormsg: From DATATAKING: pnt tr 276.34 6.7142046066 -CF 2009-Jul-30 02:15:05 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Jul-30 02:15:05 LOG4 got_cormsg: From DATATAKING: 6.7142046066 2009-Jul-30 02:15:05 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2009-Jul-30 02:16:01 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jul-30 02:16:01 INFO3 alfa_motor: ALFA rotator in-position -80.80 degrees 2009-Jul-30 02:16:01 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Jul-30 02:16:01 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2009-Jul-30 02:16:01 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jul-30 02:16:01 STOP finish_task: Finishing task 'rotate ALFA to -80.8 degrees' 2009-Jul-30 02:16:01 LOG5 finish_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2009-Jul-30 02:16:01 INFO2 finish_task: DONE finished configuration: rotating ALFA to -80.8 degrees 2009-Jul-30 02:16:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 02:16:01 STOP end_task: Finishing task 'rotate ALFA to -80.8 degrees' with status 'OK' 2009-Jul-30 02:16:01 LOG5 end_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2009-Jul-30 02:16:01 START begin_task: Starting task 'waiting on telescope' 2009-Jul-30 02:16:01 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2009-Jul-30 02:16:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jul-30 02:16:01 LOG3 waittrk: Start waittrk 5 2009-Jul-30 02:16:01 START begin_task: Starting task 'waiting on telescope movement' 2009-Jul-30 02:16:01 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2009-Jul-30 02:16:06 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jul-30 02:16:06 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2009-Jul-30 02:16:06 START begin_task: Starting task 'waiting on telescope on source' 2009-Jul-30 02:16:06 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2009-Jul-30 02:16:06 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jul-30 02:16:06 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2009-Jul-30 02:16:07 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jul-30 02:16:07 INFO2 waittrk: Now tracking AGES7448_p1_023 2009-Jul-30 02:16:07 LOG4 waittrk: Current telescope position: Az = 275.80 ZA = 6.70 2009-Jul-30 02:16:07 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jul-30 02:16:07 LOG5 finish_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2009-Jul-30 02:16:07 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Jul-30 02:16:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 02:16:07 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jul-30 02:16:07 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2009-Jul-30 02:16:07 START begin_task: Starting task 'selecting calibration type' 2009-Jul-30 02:16:07 LOG5 begin_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2009-Jul-30 02:16:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jul-30 02:16:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jul-30 02:16:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:16:07 START begin_task: Starting task 'waiting on setcal' 2009-Jul-30 02:16:07 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2009-Jul-30 02:16:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jul-30 02:16:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:16:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:16:07 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-30 02:16:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jul-30 02:16:07 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2009-Jul-30 02:16:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jul-30 02:16:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-30 02:16:07 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jul-30 02:16:07 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-30 02:16:07 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2009-Jul-30 02:16:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:16:07 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-30 02:16:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-30 02:16:07 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2009-Jul-30 02:16:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-30 02:16:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jul-30 02:16:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-30 02:16:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jul-30 02:16:07 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-30 02:16:07 LOG5 begin_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2009-Jul-30 02:16:07 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-30 02:16:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-30 02:16:07 LOG5 end_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2009-Jul-30 02:16:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-30 02:16:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jul-30 02:16:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jul-30 02:16:07 LOG5 end_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2009-Jul-30 02:16:07 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-Jul-30 02:16:07 INFO2 astwait: Waiting for 19 seconds from 06:16:07 to 06:16:26 UTC ... 2009-Jul-30 02:16:07 LOG4 send_obs_status: To obs_status: <1> TASKTIME 19 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Jul-30 02:16:07 START begin_task: Starting task 'waiting on waiting for AST time' 2009-Jul-30 02:16:07 LOG5 begin_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2009-Jul-30 02:16:26 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-Jul-30 02:16:26 LOG5 end_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2009-Jul-30 02:16:26 INFO3 astwait: Finished waiting 2009-Jul-30 02:16:26 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jul-30 02:16:26 LOG5 dopset_later: Calling 'dopset_later 61.249637039660094' 2009-Jul-30 02:16:26 INFO3 dopset_later: Setting Doppler correction for 02:17:26 (61.2 seconds from now) 2009-Jul-30 02:16:26 LOG5 antvel: Calling 'antvel 276.340000 6.714205 F 61.249637039660094' 2009-Jul-30 02:16:26 LOG2 antvel: Transforming current Az = 276.34 ZA = 6.71 to apparent RA = 22:50:30.0 Dec = +17:29:09.0 2009-Jul-30 02:16:26 LOG2 antvel: Parameters to Doppler: Heliocentric 22646 2009 211 0.0 2009-Jul-30 02:16:26 INFO5 antvel: Computed antenna velocity: -18.64821 km/s 2009-Jul-30 02:16:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-18.648211400000001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-Jul-30 02:16:26 INFO4 dopset_gen: New sky frequencies: 1381.329352 1381.329352 1381.329352 1381.329352 1381.329352 1381.329352 1381.329352 1381.329352 1381.329352 2009-Jul-30 02:16:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.329352 sky0=1381.329352 sky1=1381.329352 sky2=1381.329352 sky3=1381.329352 sky4=1381.329352 sky5=1381.329352 sky6=1381.329352 sky7=1381.329352 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-30 02:16:26 LOG2 dopset_gen: Result from 'sky2syn': 1631.329352 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-30 02:16:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631329352.0} 2009-Jul-30 02:16:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:16:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-Jul-30 02:16:26 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-Jul-30 02:16:26 INFO5 fixed_driftmap: Tracking J2000 position: RA = 22:49:03.5 Dec = +17:26:06.1 2009-Jul-30 02:16:26 LOG3 track_source: Calling 'track_source AGES7448_p1_023 224903.5 172606.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Jul-30 02:16:26 START begin_task: Starting task 'sending tracking commands' 2009-Jul-30 02:16:26 LOG5 begin_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2009-Jul-30 02:16:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_023} INFO {Slewing to source 'AGES7448_p1_023' ...} 2009-Jul-30 02:16:26 INFO1 track_source: Starting to track AGES7448_p1_023 2009-Jul-30 02:16:26 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_023" 2009-Jul-30 02:16:26 LOG3 vw_send: To DATATAKING: set ra 224903.5 2009-Jul-30 02:16:26 LOG3 vw_send: To DATATAKING: set dec 172606.1 2009-Jul-30 02:16:26 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-30 02:16:26 LOG3 vw_send: To DATATAKING: pnt tr 224903.5 172606.1 -CJ 2009-Jul-30 02:16:26 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Jul-30 02:16:26 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-30 02:16:26 LOG5 finish_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2009-Jul-30 02:16:26 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jul-30 02:16:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 02:16:26 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jul-30 02:16:26 LOG5 end_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2009-Jul-30 02:16:26 START begin_task: Starting task 'waiting on telescope' 2009-Jul-30 02:16:26 LOG5 begin_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2009-Jul-30 02:16:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jul-30 02:16:26 LOG3 waittrk: Start waittrk 5 2009-Jul-30 02:16:26 START begin_task: Starting task 'waiting on telescope movement' 2009-Jul-30 02:16:26 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2009-Jul-30 02:16:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631329352.0} 2009-Jul-30 02:16:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-30 02:16:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:16:26 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_023" 2009-Jul-30 02:16:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:16:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:16:26 LOG4 got_cormsg: From DATATAKING: set ra 224903.5 2009-Jul-30 02:16:26 LOG4 got_cormsg: From DATATAKING: set dec 172606.1 2009-Jul-30 02:16:26 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-30 02:16:26 LOG4 got_cormsg: From DATATAKING: pnt tr 224903.5 172606.1 -CJ 2009-Jul-30 02:16:26 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Jul-30 02:16:26 LOG4 got_cormsg: From DATATAKING: 224903.5 2009-Jul-30 02:16:26 LOG4 got_cormsg: From DATATAKING: vw% 172606.1 2009-Jul-30 02:16:26 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2009-Jul-30 02:16:31 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jul-30 02:16:31 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2009-Jul-30 02:16:31 START begin_task: Starting task 'waiting on telescope on source' 2009-Jul-30 02:16:31 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2009-Jul-30 02:16:33 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jul-30 02:16:33 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2009-Jul-30 02:16:33 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jul-30 02:16:33 INFO2 waittrk: Now tracking AGES7448_p1_023 2009-Jul-30 02:16:33 LOG4 waittrk: Current telescope position: Az = 275.80 ZA = 6.69 2009-Jul-30 02:16:33 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jul-30 02:16:33 LOG5 finish_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2009-Jul-30 02:16:33 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Jul-30 02:16:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 02:16:33 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jul-30 02:16:33 LOG5 end_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2009-Jul-30 02:16:33 START begin_task: Starting task 'adjusting WAPP power' 2009-Jul-30 02:16:33 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2009-Jul-30 02:16:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Jul-30 02:16:33 INFO2 adjust_power: Starting to adjust WAPP power 2009-Jul-30 02:16:33 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Jul-30 02:16:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Jul-30 02:16:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:16:33 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Jul-30 02:16:33 LOG5 begin_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2009-Jul-30 02:16:33 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Jul-30 02:16:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:16:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:16:36 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-30 02:16:36 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Jul-30 02:16:36 LOG5 end_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2009-Jul-30 02:16:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Jul-30 02:16:37 START begin_task: Starting task 'adjusting WAPP power' 2009-Jul-30 02:16:37 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2009-Jul-30 02:16:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Jul-30 02:16:37 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-30 02:16:37 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-30 02:16:37 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-30 02:16:37 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-30 02:16:37 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Jul-30 02:16:37 LOG5 begin_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2009-Jul-30 02:16:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Jul-30 02:16:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:16:37 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Jul-30 02:16:37 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2009-Jul-30 02:16:37 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 5 4 dB 2009-Jul-30 02:16:37 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Jul-30 02:16:37 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Jul-30 02:16:37 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Jul-30 02:16:37 LOG5 end_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2009-Jul-30 02:16:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.045 0.910 ALFA beam 1: 1.115 1.075 2009-Jul-30 02:16:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.969 0.961 ALFA beam 3: 0.906 0.969 2009-Jul-30 02:16:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.116 1.063 ALFA beam 5: 0.903 1.092 2009-Jul-30 02:16:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.937 0.112 ALFA beam 7: 1.032 0.136 2009-Jul-30 02:16:37 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jul-30 02:16:37 LOG5 finish_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2009-Jul-30 02:16:37 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Jul-30 02:16:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 02:16:37 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jul-30 02:16:37 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2009-Jul-30 02:16:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jul-30 02:16:37 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jul-30 02:16:37 LOG5 finish_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2009-Jul-30 02:16:37 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Jul-30 02:16:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 02:16:37 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jul-30 02:16:37 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2009-Jul-30 02:16:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2009-Jul-30 02:16:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2009-Jul-30 02:16:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2009-Jul-30 02:16:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2009-Jul-30 02:16:37 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-Jul-30 02:16:37 START begin_task: Starting task 'WAPP calibration' 2009-Jul-30 02:16:37 LOG5 begin_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2009-Jul-30 02:16:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Jul-30 02:16:38 START begin_task: Starting task 'selecting calibration type' 2009-Jul-30 02:16:38 LOG5 begin_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2009-Jul-30 02:16:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jul-30 02:16:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jul-30 02:16:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:16:38 START begin_task: Starting task 'waiting on setcal' 2009-Jul-30 02:16:38 LOG5 begin_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2009-Jul-30 02:16:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Jul-30 02:16:38 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jul-30 02:16:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-30 02:16:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:16:38 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-30 02:16:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jul-30 02:16:38 LOG5 end_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2009-Jul-30 02:16:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jul-30 02:16:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-30 02:16:38 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jul-30 02:16:38 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-30 02:16:38 LOG5 begin_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2009-Jul-30 02:16:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:16:38 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-30 02:16:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-30 02:16:38 LOG5 end_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2009-Jul-30 02:16:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-30 02:16:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jul-30 02:16:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-30 02:16:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jul-30 02:16:38 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-30 02:16:38 LOG5 begin_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2009-Jul-30 02:16:38 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-30 02:16:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-30 02:16:38 LOG5 end_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2009-Jul-30 02:16:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-30 02:16:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jul-30 02:16:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jul-30 02:16:38 LOG5 end_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2009-Jul-30 02:16:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Jul-30 02:16:38 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jul-30 02:16:38 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jul-30 02:16:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-30 02:16:38 LOG5 begin_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2009-Jul-30 02:16:38 NOTE WAPPDATA-new_file: New FITS file: wapp.20090730.a2048.0002.fits 2009-Jul-30 02:16:38 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090730.a2048.0002.fits} 2009-Jul-30 02:16:38 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-30 02:16:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jul-30 02:16:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-30 02:16:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-30 02:16:38 LOG5 end_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2009-Jul-30 02:16:38 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-Jul-30 02:16:38 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-Jul-30 02:16:38 START begin_task: Starting task 'WAPP spectral observation' 2009-Jul-30 02:16:38 LOG5 begin_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2009-Jul-30 02:16:38 LOG5 log_alfabeam: Parameters: 22.81763888888889 17.43502777777778 22.361756 2009.5779462950288 -80.800026 2009-Jul-30 02:16:38 LOG4 log_alfabeam: ALFABEAM 0 22.817638888888879 17.435027777777769 2009-Jul-30 02:16:38 LOG4 log_alfabeam: ALFABEAM 1 22.819324891767916 17.344502181768370 2009-Jul-30 02:16:38 LOG4 log_alfabeam: ALFABEAM 2 22.824758353606711 17.404667652949659 2009-Jul-30 02:16:38 LOG4 log_alfabeam: ALFABEAM 3 22.823016441252630 17.495793873368761 2009-Jul-30 02:16:38 LOG4 log_alfabeam: ALFABEAM 4 22.815865901380608 17.524757227261169 2009-Jul-30 02:16:38 LOG4 log_alfabeam: ALFABEAM 5 22.810510103155099 17.464881767815054 2009-Jul-30 02:16:38 LOG4 log_alfabeam: ALFABEAM 6 22.812227976072407 17.375748867289055 2009-Jul-30 02:16:38 INFO2 take_data: Starting WAPP scan: 921100040 2009-Jul-30 02:16:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Jul-30 02:16:39 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jul-30 02:16:39 LOG5 begin_task: Level: (5) ID = <10232> Status = 0 0 0 0 ok 2009-Jul-30 02:16:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:16:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Jul-30 02:16:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.045 0.910 1.115 1.075 2009-Jul-30 02:16:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.969 0.961 0.906 0.969 2009-Jul-30 02:16:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.116 1.063 0.903 1.092 2009-Jul-30 02:16:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.112 1.032 0.136 2009-Jul-30 02:16:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22600.00 2009-Jul-30 02:16:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.329352 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:16:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.329352 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:16:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.329352 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:16:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.329352 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Jul-30 02:16:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.329352 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:16:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.329352 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:16:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.329352 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:16:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.329352 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:16:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.329352 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:16:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:16:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (499999966 != 499999967 diff = 1)! 2009-Jul-30 02:16:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jul-30 02:16:45 LOG5 end_task: Level: (5) ID = <10232> Status = 0 0 0 0 ok 2009-Jul-30 02:16:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jul-30 02:16:45 LOG5 end_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2009-Jul-30 02:16:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Jul-30 02:16:45 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jul-30 02:16:45 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jul-30 02:16:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-30 02:16:45 LOG5 begin_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2009-Jul-30 02:16:45 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-30 02:16:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-30 02:16:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-30 02:16:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-30 02:16:45 LOG5 end_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2009-Jul-30 02:16:45 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-Jul-30 02:16:45 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-Jul-30 02:16:45 START begin_task: Starting task 'WAPP spectral observation' 2009-Jul-30 02:16:45 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2009-Jul-30 02:16:45 LOG5 log_alfabeam: Parameters: 22.81763888888889 17.43502777777778 22.363706 2009.5779465168455 -80.800026 2009-Jul-30 02:16:45 LOG4 log_alfabeam: ALFABEAM 0 22.817638888888879 17.435027777777790 2009-Jul-30 02:16:45 LOG4 log_alfabeam: ALFABEAM 1 22.819321763320175 17.344489305581860 2009-Jul-30 02:16:45 LOG4 log_alfabeam: ALFABEAM 2 22.824757348062718 17.404619208860975 2009-Jul-30 02:16:45 LOG4 log_alfabeam: ALFABEAM 3 22.823018341283579 17.495761160301083 2009-Jul-30 02:16:45 LOG4 log_alfabeam: ALFABEAM 4 22.815868649442010 17.524767366177251 2009-Jul-30 02:16:45 LOG4 log_alfabeam: ALFABEAM 5 22.810511061425519 17.464928393180845 2009-Jul-30 02:16:45 LOG4 log_alfabeam: ALFABEAM 6 22.812225970343231 17.375788169081915 2009-Jul-30 02:16:45 INFO2 take_data: Starting WAPP scan: 921100041 2009-Jul-30 02:16:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Jul-30 02:16:46 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jul-30 02:16:46 LOG5 begin_task: Level: (5) ID = <10235> Status = 0 0 0 0 ok 2009-Jul-30 02:16:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:16:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22607.00 2009-Jul-30 02:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.568 (still bad) 2009-Jul-30 02:16:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.329352 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:16:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.329352 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:16:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.329352 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:16:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.329352 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:16:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.329352 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:16:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.329352 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:16:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.329352 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:16:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.329352 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:16:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.329352 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:16:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (499999966 != 499999967 diff = 1)! 2009-Jul-30 02:16:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (499999966 != 499999967 diff = 1)! 2009-Jul-30 02:16:52 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-Jul-30 02:16:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-30 02:16:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (499999966 != 499999967 diff = 1)! 2009-Jul-30 02:16:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jul-30 02:16:52 LOG5 end_task: Level: (5) ID = <10235> Status = 0 0 0 0 ok 2009-Jul-30 02:16:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jul-30 02:16:52 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2009-Jul-30 02:16:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jul-30 02:16:52 STOP finish_task: Finishing task 'WAPP calibration' 2009-Jul-30 02:16:52 LOG5 finish_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2009-Jul-30 02:16:52 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Jul-30 02:16:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 02:16:52 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Jul-30 02:16:52 LOG5 end_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2009-Jul-30 02:16:52 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-Jul-30 02:16:52 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 276.34 and ZA = 6.71 2009-Jul-30 02:16:52 LOG3 track_source: Calling 'track_source AGES7448_p1_023 276.34 6.7142046066 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Jul-30 02:16:52 START begin_task: Starting task 'sending tracking commands' 2009-Jul-30 02:16:52 LOG5 begin_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2009-Jul-30 02:16:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_023} INFO {Slewing to source 'AGES7448_p1_023' ...} 2009-Jul-30 02:16:52 INFO1 track_source: Starting to track AGES7448_p1_023 2009-Jul-30 02:16:52 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_023" 2009-Jul-30 02:16:52 LOG3 vw_send: To DATATAKING: set ra 276.34 2009-Jul-30 02:16:52 LOG3 vw_send: To DATATAKING: set dec 6.7142046066 2009-Jul-30 02:16:52 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-30 02:16:52 LOG3 vw_send: To DATATAKING: pnt tr 276.34 6.7142046066 -CF 2009-Jul-30 02:16:53 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Jul-30 02:16:53 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-30 02:16:53 LOG5 finish_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2009-Jul-30 02:16:53 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jul-30 02:16:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-30 02:16:53 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jul-30 02:16:53 LOG5 end_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2009-Jul-30 02:16:53 LOG1 fixed_driftmap: Parameters: HA = -00:27:59.5 Start = 22:22:30.7 LST = 22:21:56.4 diff = 34.3 secs 2009-Jul-30 02:16:53 INFO2 fixed_driftmap: Waiting 32.3 seconds for RA 22:50:30 2009-Jul-30 02:16:53 INFO2 lstwait: Waiting for 32.3 secs from LST 22:21:56 to LST 22:22:29 ... 2009-Jul-30 02:16:53 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.253425057904167 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Jul-30 02:16:53 START begin_task: Starting task 'waiting on wait on LST' 2009-Jul-30 02:16:53 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2009-Jul-30 02:16:53 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_023" 2009-Jul-30 02:16:53 LOG4 got_cormsg: From DATATAKING: set ra 276.34 2009-Jul-30 02:16:53 LOG4 got_cormsg: From DATATAKING: set dec 6.7142046066 2009-Jul-30 02:16:53 LOG4 got_cormsg: From DATATAKING: vw% 276.34 2009-Jul-30 02:16:53 LOG4 got_cormsg: From DATATAKING: vw% 6.7142046066 2009-Jul-30 02:16:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:16:53 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-30 02:16:53 LOG4 got_cormsg: From DATATAKING: pnt tr 276.34 6.7142046066 -CF 2009-Jul-30 02:16:53 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Jul-30 02:16:53 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jul-30 02:16:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-30 02:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Jul-30 02:17:25 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Jul-30 02:17:25 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2009-Jul-30 02:17:25 LOG4 lstwait: Finished waiting 0.75 seconds late 2009-Jul-30 02:17:25 INFO3 lstwait: Finished waiting 2009-Jul-30 02:17:25 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jul-30 02:17:25 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-Jul-30 02:17:25 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Jul-30 02:17:25 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-Jul-30 02:17:25 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Jul-30 02:17:25 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-Jul-30 02:17:25 START begin_task: Starting task 'WAPP spectral observation' 2009-Jul-30 02:17:25 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2009-Jul-30 02:17:25 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jul-30 02:17:25 INFO2 take_data: Starting WAPP scan: 921100042 2009-Jul-30 02:17:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-Jul-30 02:17:26 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jul-30 02:17:26 LOG5 begin_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2009-Jul-30 02:17:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-30 02:17:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22647.00 2009-Jul-30 02:17:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.329352 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-30 02:17:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.329352 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:17:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.329352 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:17:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.329352 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:17:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.329352 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:17:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.329352 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:17:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.329352 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:17:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.329352 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:17:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.329352 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Jul-30 02:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Jul-30 02:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Jul-30 02:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Jul-30 02:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Jul-30 02:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Jul-30 02:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Jul-30 02:17:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Jul-30 02:17:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.041 0.908 1.114 1.076 2009-Jul-30 02:17:40 LOG