2009-Jul-16 02:11:44 BEGIN executive: CIMA executive starting ... 2009-Jul-16 02:11:45 NOTE executive: STARTING NEW CIMA SESSION 2009-Jul-16 02:11:45 INFO1 executive: Using CIMA version 3.0.11 'normal' from 2009-05-18 10:00 2009-Jul-16 02:11:45 INFO4 executive: This is an ON-LINE session 2009-Jul-16 02:11:45 INFO4 executive: This is a REMOTE session 2009-Jul-16 02:11:45 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Jul-16 02:11:45 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'ss' 2009-Jul-16 02:11:45 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20090716' 2009-Jul-16 02:11:46 LOG2 log_preferences: Currently applied preferences: 2009-Jul-16 02:11:46 LOG2 log_preferences: prefs(dailylog) = daily 2009-Jul-16 02:11:46 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Jul-16 02:11:46 LOG2 log_preferences: prefs(datawindow) = ignore 2009-Jul-16 02:11:46 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Jul-16 02:11:46 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Jul-16 02:11:46 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Jul-16 02:11:46 LOG2 log_preferences: prefs(logcolours) = full 2009-Jul-16 02:11:46 LOG2 log_preferences: prefs(displaylevel) = INFO3 2009-Jul-16 02:11:46 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Jul-16 02:11:46 LOG2 log_preferences: prefs(displayformat) = short 2009-Jul-16 02:11:46 LOG2 log_preferences: prefs(logformat) = new 2009-Jul-16 02:11:46 LOG2 log_preferences: prefs(fontsize) = 4 2009-Jul-16 02:11:46 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Jul-16 02:11:46 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2009-Jul-16 02:11:46 ALERT executive: CIMA executive ready 2009-Jul-16 02:11:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:11:48 LOG4 got_cormsg: From DATATAKING: setup 2009-Jul-16 02:11:53 NOTE frontend: CIMA frontend ready 2009-Jul-16 02:11:56 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2009-Jul-16 02:11:56 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2009-Jul-16 02:11:56 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Jul-16 02:11:56 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Jul-16 02:11:56 LOG4 got_cormsg: From DATATAKING: 2009-Jul-16 02:11:56 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2009-Jul-16 02:11:56 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Jul-16 02:11:56 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Jul-16 02:11:56 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Jul-16 02:11:56 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Jul-16 02:11:56 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Jul-16 02:11:56 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Jul-16 02:11:56 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Jul-16 02:11:56 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Jul-16 02:11:56 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Jul-16 02:11:56 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Jul-16 02:11:56 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Jul-16 02:11:56 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2009-Jul-16 02:11:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:11:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:11:59 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Jul-16 02:11:59 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Jul-16 02:11:59 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Jul-16 02:11:59 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Jul-16 02:11:59 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Jul-16 02:11:59 NOTE select_receiver: Starting to select receiver ALFA 2009-Jul-16 02:11:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Jul-16 02:11:59 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2009-Jul-16 02:11:59 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Jul-16 02:11:59 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Jul-16 02:11:59 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Jul-16 02:11:59 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Jul-16 02:11:59 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Jul-16 02:11:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-16 02:11:59 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Jul-16 02:11:59 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Jul-16 02:11:59 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2009-Jul-16 02:11:59 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Jul-16 02:12:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:12:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:12:11 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Jul-16 02:12:11 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Jul-16 02:12:11 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Jul-16 02:12:11 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Jul-16 02:12:11 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Jul-16 02:12:11 NOTE restart_wapp: Restarting all WAPPs 2009-Jul-16 02:12:11 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Jul-16 02:12:11 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Jul-16 02:12:11 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Jul-16 02:12:11 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Jul-16 02:12:15 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Jul-16 02:12:15 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Jul-16 02:12:15 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Jul-16 02:12:15 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Jul-16 02:12:59 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc.cmd ' to executive ... 2009-Jul-16 02:12:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_ages.conf} 2009-Jul-16 02:12:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2009-Jul-16 02:12:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2009-Jul-16 02:12:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2009-Jul-16 02:12:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2009-Jul-16 02:12:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2009-Jul-16 02:12:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2009-Jul-16 02:12:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2009-Jul-16 02:12:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2009-Jul-16 02:12:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2009-Jul-16 02:12:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2009-Jul-16 02:12:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2009-Jul-16 02:12:59 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2009-Jul-16 02:12:59 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Jul-16 02:12:59 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 13 2009-Jul-16 02:12:59 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 13' 2009-Jul-16 02:12:59 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2009-Jul-16 02:12:59 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Jul-16 02:12:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2009-Jul-16 02:12:59 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2009-Jul-16 02:12:59 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2009-Jul-16 02:12:59 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Jul-16 02:12:59 NOTE CIMA-check_config_file: File 'togs_ages.conf' contains a observing mode set-up which will be ignored! 2009-Jul-16 02:12:59 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-16 02:12:59 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Jul-16 02:12:59 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Jul-16 02:13:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Jul-16 02:13:01 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-16 02:13:01 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Jul-16 02:13:01 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Jul-16 02:13:01 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Jul-16 02:13:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Jul-16 02:13:01 INFO1 config_iflo: Selecting receiver ALFA 2009-Jul-16 02:13:02 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Jul-16 02:13:02 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-Jul-16 02:13:02 START begin_task: Starting task 'selecting receiver ALFA' 2009-Jul-16 02:13:02 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Jul-16 02:13:02 NOTE select_receiver: Starting to select receiver ALFA 2009-Jul-16 02:13:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Jul-16 02:13:02 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2009-Jul-16 02:13:02 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Jul-16 02:13:02 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Jul-16 02:13:02 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Jul-16 02:13:02 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Jul-16 02:13:02 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Jul-16 02:13:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 02:13:02 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Jul-16 02:13:02 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Jul-16 02:13:02 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Jul-16 02:13:02 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Jul-16 02:13:02 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Jul-16 02:13:02 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Jul-16 02:13:02 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Jul-16 02:13:02 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Jul-16 02:13:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 02:13:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jul-16 02:13:02 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 02:13:02 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Jul-16 02:13:02 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2009-Jul-16 02:13:02 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Jul-16 02:13:03 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 02:13:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 02:13:03 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Jul-16 02:13:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 02:13:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jul-16 02:13:03 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Jul-16 02:13:03 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Jul-16 02:13:03 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Jul-16 02:13:03 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Jul-16 02:13:03 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Jul-16 02:13:03 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Jul-16 02:13:03 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Jul-16 02:13:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2009-Jul-16 02:13:03 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Jul-16 02:13:03 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Jul-16 02:13:03 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Jul-16 02:13:03 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Jul-16 02:13:03 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Jul-16 02:13:03 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Jul-16 02:13:03 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Jul-16 02:13:03 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Jul-16 02:13:03 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Jul-16 02:13:03 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Jul-16 02:13:03 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Jul-16 02:13:03 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Jul-16 02:13:03 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Jul-16 02:13:03 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Jul-16 02:13:03 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Jul-16 02:13:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:13:03 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Jul-16 02:13:03 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Jul-16 02:13:03 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Jul-16 02:13:03 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Jul-16 02:13:03 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Jul-16 02:13:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Jul-16 02:13:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 02:13:03 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Jul-16 02:13:03 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Jul-16 02:13:03 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Jul-16 02:13:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Jul-16 02:13:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Jul-16 02:13:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Jul-16 02:13:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Jul-16 02:13:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2009-Jul-16 02:13:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Jul-16 02:13:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Jul-16 02:13:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Jul-16 02:13:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Jul-16 02:13:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Jul-16 02:13:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Jul-16 02:13:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Jul-16 02:13:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Jul-16 02:13:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Jul-16 02:13:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:13:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Jul-16 02:13:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Jul-16 02:13:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Jul-16 02:13:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Jul-16 02:13:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 02:13:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:18 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-16 02:13:18 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Jul-16 02:13:18 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Jul-16 02:13:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Jul-16 02:13:18 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Jul-16 02:13:18 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Jul-16 02:13:18 DONE finish_task: DONE finished configuration: IF/LO path 2009-Jul-16 02:13:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-16 02:13:18 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Jul-16 02:13:18 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Jul-16 02:13:18 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Jul-16 02:13:19 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Jul-16 02:13:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Jul-16 02:13:19 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Jul-16 02:13:19 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Jul-16 02:13:19 START begin_task: Starting task 'selecting calibration port' 2009-Jul-16 02:13:19 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Jul-16 02:13:19 LOG3 vw_send: To DATATAKING: calport 3 2009-Jul-16 02:13:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Jul-16 02:13:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 02:13:19 START begin_task: Starting task 'waiting on calport' 2009-Jul-16 02:13:19 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Jul-16 02:13:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:19 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Jul-16 02:13:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 02:13:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:19 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-16 02:13:19 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Jul-16 02:13:19 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Jul-16 02:13:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Jul-16 02:13:19 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Jul-16 02:13:19 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Jul-16 02:13:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jul-16 02:13:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jul-16 02:13:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-16 02:13:19 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Jul-16 02:13:19 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-16 02:13:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-16 02:13:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-16 02:13:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-16 02:13:19 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Jul-16 02:13:19 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Jul-16 02:13:19 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Jul-16 02:13:19 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Jul-16 02:13:19 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Jul-16 02:13:19 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Jul-16 02:13:19 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Jul-16 02:13:19 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Jul-16 02:13:19 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Jul-16 02:13:19 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2009-Jul-16 02:13:19 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2009-Jul-16 02:13:19 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2009-Jul-16 02:13:19 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2009-Jul-16 02:13:19 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Jul-16 02:13:19 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Jul-16 02:13:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-16 02:13:19 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Jul-16 02:13:19 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-16 02:13:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-16 02:13:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-16 02:13:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-16 02:13:19 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Jul-16 02:13:19 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2009-Jul-16 02:13:19 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2009-Jul-16 02:13:19 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2009-Jul-16 02:13:19 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2009-Jul-16 02:13:20 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Jul-16 02:13:20 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Jul-16 02:13:20 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Jul-16 02:13:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-16 02:13:20 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Jul-16 02:13:20 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Jul-16 02:13:20 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2009-Jul-16 02:13:20 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2009-Jul-16 02:13:20 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2009-Jul-16 02:13:20 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2009-Jul-16 02:13:20 INFO5 is_if_valid: Condition parsed as: 1 2009-Jul-16 02:13:20 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2009-Jul-16 02:13:20 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2009-Jul-16 02:13:20 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Jul-16 02:13:20 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Jul-16 02:13:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Jul-16 02:13:20 LOG3 track_source: Calling 'track_source galfasrc 224000 +155900 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2009-Jul-16 02:13:20 START begin_task: Starting task 'sending tracking commands' 2009-Jul-16 02:13:20 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Jul-16 02:13:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Jul-16 02:13:20 INFO1 track_source: Starting to track galfasrc 2009-Jul-16 02:13:20 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Jul-16 02:13:20 LOG3 vw_send: To DATATAKING: set ra 224000 2009-Jul-16 02:13:20 LOG3 vw_send: To DATATAKING: set dec +155900 2009-Jul-16 02:13:20 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-16 02:13:20 LOG3 vw_send: To DATATAKING: pnt tr 224000 +155900 -CJ 2009-Jul-16 02:13:20 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Jul-16 02:13:20 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-16 02:13:20 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Jul-16 02:13:20 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jul-16 02:13:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 02:13:20 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jul-16 02:13:20 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Jul-16 02:13:20 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Jul-16 02:13:20 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Jul-16 02:13:20 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Jul-16 02:13:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-16 02:13:20 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Jul-16 02:13:20 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Jul-16 02:13:20 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2009-Jul-16 02:13:21 INFO1 run_command_line: Skipping line 'ELSEIF isup(galfasrc2) then' since an earlier condition already has been true 2009-Jul-16 02:13:21 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2009-Jul-16 02:13:21 INFO1 run_command_line: Skipping line 'GOTO galfasrc2' in non-true conditional branch 2009-Jul-16 02:13:21 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2009-Jul-16 02:13:21 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2009-Jul-16 02:13:21 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2009-Jul-16 02:13:21 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2009-Jul-16 02:13:21 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2009-Jul-16 02:13:21 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2009-Jul-16 02:13:21 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2009-Jul-16 02:13:21 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2009-Jul-16 02:13:21 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Jul-16 02:13:21 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Jul-16 02:13:21 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Jul-16 02:13:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Jul-16 02:13:21 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Jul-16 02:13:21 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Jul-16 02:13:21 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Jul-16 02:13:21 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Jul-16 02:13:21 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Jul-16 02:13:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2009-Jul-16 02:13:21 NOTE WAPPDATA-new_file: New FITS file: wapp.20090716.a2048.0000.fits 2009-Jul-16 02:13:21 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Jul-16 02:13:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Jul-16 02:13:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Jul-16 02:13:21 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090716.a2048.0000.fits} 2009-Jul-16 02:13:21 LOG4 got_cormsg: From DATATAKING: set ra 224000 2009-Jul-16 02:13:21 LOG4 got_cormsg: From DATATAKING: set dec +155900 2009-Jul-16 02:13:21 LOG4 got_cormsg: From DATATAKING: vw% 224000 2009-Jul-16 02:13:21 LOG4 got_cormsg: From DATATAKING: vw% +155900 2009-Jul-16 02:13:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:21 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-16 02:13:21 LOG4 got_cormsg: From DATATAKING: pnt tr 224000 +155900 -CJ 2009-Jul-16 02:13:21 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Jul-16 02:13:21 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jul-16 02:13:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:13:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2009-Jul-16 02:13:28 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jul-16 02:13:28 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Jul-16 02:13:28 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Jul-16 02:13:28 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Jul-16 02:13:28 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jul-16 02:13:28 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Jul-16 02:13:28 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Jul-16 02:13:28 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Jul-16 02:13:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-16 02:13:28 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Jul-16 02:13:28 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Jul-16 02:13:28 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2009-Jul-16 02:13:28 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Jul-16 02:13:28 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Jul-16 02:13:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jul-16 02:13:28 LOG3 waittrk: Start waittrk 5 2009-Jul-16 02:13:28 START begin_task: Starting task 'waiting on telescope movement' 2009-Jul-16 02:13:28 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Jul-16 02:13:34 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jul-16 02:13:34 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Jul-16 02:13:34 START begin_task: Starting task 'waiting on telescope on source' 2009-Jul-16 02:13:34 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Jul-16 02:18:18 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jul-16 02:18:18 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Jul-16 02:18:18 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jul-16 02:18:18 INFO2 waittrk: Now tracking galfasrc 2009-Jul-16 02:18:18 LOG4 waittrk: Current telescope position: Az = 274.50 ZA = 17.43 2009-Jul-16 02:18:18 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jul-16 02:18:18 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Jul-16 02:18:18 DONE finish_task: DONE finished waiting: telescope on source 2009-Jul-16 02:18:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-16 02:18:19 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jul-16 02:18:19 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Jul-16 02:18:19 COMMAND run_command_line: EXECUTING command 20: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2009-Jul-16 02:18:19 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Jul-16 02:18:19 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-16 02:18:19 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2009-Jul-16 02:18:19 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Jul-16 02:18:19 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Jul-16 02:18:19 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Jul-16 02:18:19 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Jul-16 02:18:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Jul-16 02:18:19 START begin_task: Starting task 'selecting calibration type' 2009-Jul-16 02:18:19 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Jul-16 02:18:19 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jul-16 02:18:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jul-16 02:18:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 02:18:19 START begin_task: Starting task 'waiting on setcal' 2009-Jul-16 02:18:19 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Jul-16 02:18:19 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jul-16 02:18:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 02:18:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:18:20 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-16 02:18:20 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jul-16 02:18:20 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Jul-16 02:18:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jul-16 02:18:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 02:18:20 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jul-16 02:18:20 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 02:18:20 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Jul-16 02:18:20 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 02:18:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 02:18:20 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Jul-16 02:18:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 02:18:20 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jul-16 02:18:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 02:18:20 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jul-16 02:18:20 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 02:18:20 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Jul-16 02:18:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:18:20 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 02:18:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 02:18:20 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Jul-16 02:18:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 02:18:20 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jul-16 02:18:20 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jul-16 02:18:20 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Jul-16 02:18:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2009-Jul-16 02:18:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2009-Jul-16 02:18:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2009-Jul-16 02:18:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2009-Jul-16 02:18:20 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090716.a2048.0000.fits' is empty! 2009-Jul-16 02:18:20 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Jul-16 02:18:20 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Jul-16 02:18:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Jul-16 02:18:20 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jul-16 02:18:20 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jul-16 02:18:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-16 02:18:20 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Jul-16 02:18:20 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-16 02:18:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-16 02:18:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-16 02:18:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-16 02:18:20 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Jul-16 02:18:20 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Jul-16 02:18:20 START begin_task: Starting task 'adjusting WAPP power' 2009-Jul-16 02:18:20 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Jul-16 02:18:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Jul-16 02:18:20 INFO2 adjust_power: Starting to adjust WAPP power 2009-Jul-16 02:18:20 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Jul-16 02:18:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Jul-16 02:18:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 02:18:20 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Jul-16 02:18:20 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Jul-16 02:18:20 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Jul-16 02:18:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 02:18:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2009-Jul-16 02:18:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:18:24 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-16 02:18:24 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Jul-16 02:18:24 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Jul-16 02:18:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Jul-16 02:18:24 START begin_task: Starting task 'adjusting WAPP power' 2009-Jul-16 02:18:24 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Jul-16 02:18:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Jul-16 02:18:24 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-16 02:18:24 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-16 02:18:24 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-16 02:18:24 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-16 02:18:24 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Jul-16 02:18:24 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Jul-16 02:18:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Jul-16 02:18:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:18:24 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 3 1 dB --- beam 1: 3 3 dB 2009-Jul-16 02:18:24 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 2 0 dB --- beam 3: 0 0 dB 2009-Jul-16 02:18:24 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 0 dB --- beam 5: 0 0 dB 2009-Jul-16 02:18:24 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 0 0 dB --- beam 7: 0 0 dB 2009-Jul-16 02:18:24 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Jul-16 02:18:24 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Jul-16 02:18:24 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Jul-16 02:18:24 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.093 1.040 ALFA beam 1: 0.894 0.893 2009-Jul-16 02:18:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.021 0.990 ALFA beam 3: 0.839 0.714 2009-Jul-16 02:18:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.638 0.394 ALFA beam 5: 1.081 0.983 2009-Jul-16 02:18:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.656 0.101 ALFA beam 7: 0.718 0.123 2009-Jul-16 02:18:25 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jul-16 02:18:25 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Jul-16 02:18:25 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Jul-16 02:18:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 02:18:25 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jul-16 02:18:25 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Jul-16 02:18:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jul-16 02:18:25 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jul-16 02:18:25 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Jul-16 02:18:25 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Jul-16 02:18:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 02:18:25 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jul-16 02:18:25 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Jul-16 02:18:25 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2009-Jul-16 02:18:25 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2009-Jul-16 02:18:25 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-Jul-16 02:18:25 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:18:25 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53962 J 2009-Jul-16 02:18:25 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:18:25 LOG2 antvel: Parameters to Doppler: Topocentric 22704 2009 197 0.0 2009-Jul-16 02:18:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:18:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-Jul-16 02:18:25 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-Jul-16 02:18:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:18:25 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:18:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Jul-16 02:18:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:18:25 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-16 02:18:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:18:25 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Jul-16 02:18:25 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.471346 2009.5396197429461 18.999933 2009-Jul-16 02:18:25 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666668 15.983333333333329 2009-Jul-16 02:18:25 LOG4 log_alfabeam: ALFABEAM 1 22.659306810247696 15.984986815170824 2009-Jul-16 02:18:25 LOG4 log_alfabeam: ALFABEAM 2 22.663213904526572 15.904714067450000 2009-Jul-16 02:18:25 LOG4 log_alfabeam: ALFABEAM 3 22.670571137547672 15.902689585519825 2009-Jul-16 02:18:25 LOG4 log_alfabeam: ALFABEAM 4 22.674027776552549 15.981826847227111 2009-Jul-16 02:18:25 LOG4 log_alfabeam: ALFABEAM 5 22.670097890079028 16.062343941337637 2009-Jul-16 02:18:25 LOG4 log_alfabeam: ALFABEAM 6 22.662734271371718 16.063479154985554 2009-Jul-16 02:18:25 INFO2 take_data: Starting WAPP+GALFA scan: 919700057 2009-Jul-16 02:18:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:18:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:18:25 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Jul-16 02:18:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:18:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Jul-16 02:18:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:18:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:18:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:18:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22706.00 2009-Jul-16 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:18:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:18:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.101 < 0.75)! 2009-Jul-16 02:18:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 1.040 0.894 0.893 2009-Jul-16 02:18:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.054 0.939 0.762 2009-Jul-16 02:18:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.691 0.412 1.190 1.058 2009-Jul-16 02:18:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.656 0.101 0.718 0.123 2009-Jul-16 02:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.191 (still bad) 2009-Jul-16 02:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.192 (still bad) 2009-Jul-16 02:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.190 (still bad) 2009-Jul-16 02:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.189 (still bad) 2009-Jul-16 02:18:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:18:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:18:36 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Jul-16 02:18:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:18:36 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Jul-16 02:18:36 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2009-Jul-16 02:18:36 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2009-Jul-16 02:18:36 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2009-Jul-16 02:18:36 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:18:36 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53962 J 2009-Jul-16 02:18:36 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:18:36 LOG2 antvel: Parameters to Doppler: Topocentric 22716 2009 197 0.0 2009-Jul-16 02:18:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:18:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2009-Jul-16 02:18:36 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2009-Jul-16 02:18:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:18:36 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:18:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Jul-16 02:18:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:18:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-16 02:18:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:18:36 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Jul-16 02:18:36 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.474689 2009.5396201232033 18.999933 2009-Jul-16 02:18:36 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333340 2009-Jul-16 02:18:36 LOG4 log_alfabeam: ALFABEAM 1 22.659306839419266 15.985012491046007 2009-Jul-16 02:18:36 LOG4 log_alfabeam: ALFABEAM 2 22.663212566135666 15.904726565152320 2009-Jul-16 02:18:36 LOG4 log_alfabeam: ALFABEAM 3 22.670569764207304 15.902675424023814 2009-Jul-16 02:18:36 LOG4 log_alfabeam: ALFABEAM 4 22.674027752880438 15.981801758587638 2009-Jul-16 02:18:36 LOG4 log_alfabeam: ALFABEAM 5 22.670099165243041 16.062332692642023 2009-Jul-16 02:18:36 LOG4 log_alfabeam: ALFABEAM 6 22.662735565153724 16.063492010691338 2009-Jul-16 02:18:36 INFO2 take_data: Starting WAPP+GALFA scan: 919700058 2009-Jul-16 02:18:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:18:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:18:37 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Jul-16 02:18:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:18:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Jul-16 02:18:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:18:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:18:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:18:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22718.00 2009-Jul-16 02:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.191 (still bad) 2009-Jul-16 02:18:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:18:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:18:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:18:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:18:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:18:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:18:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:18:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:18:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jul-16 02:18:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:18:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:18:48 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Jul-16 02:18:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:18:48 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Jul-16 02:18:48 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2009-Jul-16 02:18:48 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2009-Jul-16 02:18:48 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2009-Jul-16 02:18:48 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:18:48 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53962 J 2009-Jul-16 02:18:48 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:18:48 LOG2 antvel: Parameters to Doppler: Topocentric 22728 2009 197 0.0 2009-Jul-16 02:18:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:18:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2009-Jul-16 02:18:48 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2009-Jul-16 02:18:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:18:48 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:18:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Jul-16 02:18:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:18:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-16 02:18:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:18:48 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Jul-16 02:18:48 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.478031 2009.5396205034604 18.999933 2009-Jul-16 02:18:48 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333336 2009-Jul-16 02:18:48 LOG4 log_alfabeam: ALFABEAM 1 22.659306869260220 15.985038376912780 2009-Jul-16 02:18:48 LOG4 log_alfabeam: ALFABEAM 2 22.663211217076878 15.904739168473842 2009-Jul-16 02:18:48 LOG4 log_alfabeam: ALFABEAM 3 22.670568379445854 15.902661153315414 2009-Jul-16 02:18:48 LOG4 log_alfabeam: ALFABEAM 4 22.674027728590971 15.981776462827641 2009-Jul-16 02:18:48 LOG4 log_alfabeam: ALFABEAM 5 22.670100450824691 16.062321345241664 2009-Jul-16 02:18:48 LOG4 log_alfabeam: ALFABEAM 6 22.662736869892409 16.063504969962153 2009-Jul-16 02:18:48 INFO2 take_data: Starting WAPP+GALFA scan: 919700059 2009-Jul-16 02:18:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:18:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:18:49 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Jul-16 02:18:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:18:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Jul-16 02:18:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:18:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:18:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:18:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22730.00 2009-Jul-16 02:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:18:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:18:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:18:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:18:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:18:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:18:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:18:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:18:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:18:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Jul-16 02:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 02:19:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:19:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:19:00 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Jul-16 02:19:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:19:00 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Jul-16 02:19:00 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2009-Jul-16 02:19:00 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2009-Jul-16 02:19:00 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2009-Jul-16 02:19:00 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:19:00 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53962 J 2009-Jul-16 02:19:00 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:19:00 LOG2 antvel: Parameters to Doppler: Topocentric 22740 2009 197 0.0 2009-Jul-16 02:19:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:19:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2009-Jul-16 02:19:00 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2009-Jul-16 02:19:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:19:00 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:19:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Jul-16 02:19:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:19:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-16 02:19:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:19:00 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Jul-16 02:19:00 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.481374 2009.5396208837174 18.999933 2009-Jul-16 02:19:00 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333348 2009-Jul-16 02:19:00 LOG4 log_alfabeam: ALFABEAM 1 22.659306899801472 15.985064490025337 2009-Jul-16 02:19:00 LOG4 log_alfabeam: ALFABEAM 2 22.663209856456870 15.904751885926398 2009-Jul-16 02:19:00 LOG4 log_alfabeam: ALFABEAM 3 22.670566982334428 15.902646764019831 2009-Jul-16 02:19:00 LOG4 log_alfabeam: ALFABEAM 4 22.674027703657192 15.981750943070331 2009-Jul-16 02:19:00 LOG4 log_alfabeam: ALFABEAM 5 22.670101747677631 16.062309891441075 2009-Jul-16 02:19:00 LOG4 log_alfabeam: ALFABEAM 6 22.662738186464253 16.063518041346128 2009-Jul-16 02:19:00 INFO2 take_data: Starting WAPP+GALFA scan: 919700060 2009-Jul-16 02:19:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:19:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:19:01 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Jul-16 02:19:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:19:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Jul-16 02:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:19:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:19:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:19:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:19:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22742.00 2009-Jul-16 02:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:19:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:19:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:19:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:19:12 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Jul-16 02:19:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:19:12 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Jul-16 02:19:12 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2009-Jul-16 02:19:12 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2009-Jul-16 02:19:12 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2009-Jul-16 02:19:12 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:19:12 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53962 J 2009-Jul-16 02:19:12 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:19:12 LOG2 antvel: Parameters to Doppler: Topocentric 22752 2009 197 0.0 2009-Jul-16 02:19:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:19:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2009-Jul-16 02:19:12 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2009-Jul-16 02:19:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:19:12 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:19:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Jul-16 02:19:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:19:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-16 02:19:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:19:12 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Jul-16 02:19:12 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.484716 2009.5396212639744 18.999933 2009-Jul-16 02:19:12 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333348 2009-Jul-16 02:19:12 LOG4 log_alfabeam: ALFABEAM 1 22.659306931038103 15.985090816542444 2009-Jul-16 02:19:12 LOG4 log_alfabeam: ALFABEAM 2 22.663208485002848 15.904764710882121 2009-Jul-16 02:19:12 LOG4 log_alfabeam: ALFABEAM 3 22.670565573607583 15.902632263903309 2009-Jul-16 02:19:12 LOG4 log_alfabeam: ALFABEAM 4 22.674027678081391 15.981725212826213 2009-Jul-16 02:19:12 LOG4 log_alfabeam: ALFABEAM 5 22.670103055111156 16.062298337177374 2009-Jul-16 02:19:12 LOG4 log_alfabeam: ALFABEAM 6 22.662739514178330 16.063531217823122 2009-Jul-16 02:19:12 INFO2 take_data: Starting WAPP+GALFA scan: 919700061 2009-Jul-16 02:19:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:19:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:19:13 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Jul-16 02:19:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:19:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Jul-16 02:19:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:19:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:19:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:19:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22754.00 2009-Jul-16 02:19:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:19:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:19:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:19:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:19:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:19:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:19:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:19:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:19:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:19:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:19:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:19:24 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Jul-16 02:19:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:19:24 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Jul-16 02:19:24 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2009-Jul-16 02:19:24 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2009-Jul-16 02:19:24 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2009-Jul-16 02:19:24 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:19:24 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53962 J 2009-Jul-16 02:19:24 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:19:24 LOG2 antvel: Parameters to Doppler: Topocentric 22764 2009 197 0.0 2009-Jul-16 02:19:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:19:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2009-Jul-16 02:19:24 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2009-Jul-16 02:19:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:19:24 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:19:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Jul-16 02:19:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:19:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-16 02:19:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:19:24 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Jul-16 02:19:24 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.488059 2009.5396216442314 18.999933 2009-Jul-16 02:19:24 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666668 15.983333333333336 2009-Jul-16 02:19:24 LOG4 log_alfabeam: ALFABEAM 1 22.659306963002368 15.985117374020666 2009-Jul-16 02:19:24 LOG4 log_alfabeam: ALFABEAM 2 22.663207101806282 15.904777652008837 2009-Jul-16 02:19:24 LOG4 log_alfabeam: ALFABEAM 3 22.670564152319795 15.902617643437621 2009-Jul-16 02:19:24 LOG4 log_alfabeam: ALFABEAM 4 22.674027651835381 15.981699254920356 2009-Jul-16 02:19:24 LOG4 log_alfabeam: ALFABEAM 5 22.670104373993794 16.062286674609464 2009-Jul-16 02:19:24 LOG4 log_alfabeam: ALFABEAM 6 22.662740853927094 16.063544508086704 2009-Jul-16 02:19:24 INFO2 take_data: Starting WAPP+GALFA scan: 919700062 2009-Jul-16 02:19:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:19:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:19:25 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Jul-16 02:19:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:19:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Jul-16 02:19:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:19:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:19:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:19:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22766.00 2009-Jul-16 02:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:19:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:19:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:19:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:19:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:19:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:19:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:19:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:19:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:19:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:19:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 02:19:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 1.063 0.895 0.899 2009-Jul-16 02:19:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.036 1.012 0.854 0.729 2009-Jul-16 02:19:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.646 0.402 1.096 0.998 2009-Jul-16 02:19:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.668 0.103 0.725 0.126 2009-Jul-16 02:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:19:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:19:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:19:36 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Jul-16 02:19:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:19:36 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Jul-16 02:19:36 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2009-Jul-16 02:19:36 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2009-Jul-16 02:19:36 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2009-Jul-16 02:19:36 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:19:36 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53962 J 2009-Jul-16 02:19:36 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:19:36 LOG2 antvel: Parameters to Doppler: Topocentric 22776 2009 197 0.0 2009-Jul-16 02:19:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:19:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2009-Jul-16 02:19:36 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2009-Jul-16 02:19:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:19:36 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:19:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Jul-16 02:19:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:19:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-16 02:19:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:19:36 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Jul-16 02:19:36 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.491401 2009.5396220244886 18.999933 2009-Jul-16 02:19:36 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333322 2009-Jul-16 02:19:36 LOG4 log_alfabeam: ALFABEAM 1 22.659306995688958 15.985144148392040 2009-Jul-16 02:19:36 LOG4 log_alfabeam: ALFABEAM 2 22.663205707606060 15.904790702568553 2009-Jul-16 02:19:36 LOG4 log_alfabeam: ALFABEAM 3 22.670562719217749 15.902602910511042 2009-Jul-16 02:19:36 LOG4 log_alfabeam: ALFABEAM 4 22.674027624921784 15.981673083086841 2009-Jul-16 02:19:36 LOG4 log_alfabeam: ALFABEAM 5 22.670105703623442 16.062274909777226 2009-Jul-16 02:19:36 LOG4 log_alfabeam: ALFABEAM 6 22.662742205007941 16.063557905001371 2009-Jul-16 02:19:36 INFO2 take_data: Starting WAPP+GALFA scan: 919700063 2009-Jul-16 02:19:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:19:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:19:37 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Jul-16 02:19:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:19:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Jul-16 02:19:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:19:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:19:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:19:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22778.00 2009-Jul-16 02:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:19:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:19:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:19:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:19:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:19:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:19:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:19:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:19:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:19:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Jul-16 02:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Jul-16 02:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:19:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:19:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:19:48 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Jul-16 02:19:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:19:48 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Jul-16 02:19:48 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Jul-16 02:19:48 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jul-16 02:19:48 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jul-16 02:19:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-16 02:19:48 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Jul-16 02:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:19:48 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-16 02:19:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jul-16 02:19:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-16 02:19:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-16 02:19:48 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Jul-16 02:19:48 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2009-Jul-16 02:19:48 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2009-Jul-16 02:19:48 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-Jul-16 02:19:48 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:19:48 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53962 J 2009-Jul-16 02:19:48 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:19:48 LOG2 antvel: Parameters to Doppler: Topocentric 22788 2009 197 0.0 2009-Jul-16 02:19:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:19:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-Jul-16 02:19:48 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-Jul-16 02:19:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:19:48 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:19:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Jul-16 02:19:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:19:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-16 02:19:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:19:48 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Jul-16 02:19:48 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.494744 2009.5396224047456 18.999933 2009-Jul-16 02:19:48 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333340 2009-Jul-16 02:19:48 LOG4 log_alfabeam: ALFABEAM 1 22.659307029131504 15.985171157520778 2009-Jul-16 02:19:48 LOG4 log_alfabeam: ALFABEAM 2 22.663204301478231 15.904803871388149 2009-Jul-16 02:19:48 LOG4 log_alfabeam: ALFABEAM 3 22.670561273338976 15.902588055439445 2009-Jul-16 02:19:48 LOG4 log_alfabeam: ALFABEAM 4 22.674027597311145 15.981646679847293 2009-Jul-16 02:19:48 LOG4 log_alfabeam: ALFABEAM 5 22.670107044883725 16.062263034691068 2009-Jul-16 02:19:48 LOG4 log_alfabeam: ALFABEAM 6 22.662743568329574 16.063571417408394 2009-Jul-16 02:19:48 INFO2 take_data: Starting WAPP+GALFA scan: 919700064 2009-Jul-16 02:19:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:19:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:19:49 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Jul-16 02:19:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:19:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Jul-16 02:19:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:19:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:19:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:19:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22790.00 2009-Jul-16 02:19:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:19:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:19:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:19:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:19:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:19:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:19:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:19:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:19:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 2.177 (still bad) 2009-Jul-16 02:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 2.178 (still bad) 2009-Jul-16 02:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 2.174 (still bad) 2009-Jul-16 02:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 2.177 (still bad) 2009-Jul-16 02:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 2.178 (still bad) 2009-Jul-16 02:20:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:20:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:20:00 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Jul-16 02:20:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:20:00 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Jul-16 02:20:00 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2009-Jul-16 02:20:00 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2009-Jul-16 02:20:00 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2009-Jul-16 02:20:00 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:20:00 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53962 J 2009-Jul-16 02:20:00 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:20:00 LOG2 antvel: Parameters to Doppler: Topocentric 22800 2009 197 0.0 2009-Jul-16 02:20:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:20:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2009-Jul-16 02:20:00 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2009-Jul-16 02:20:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:20:00 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:20:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Jul-16 02:20:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:20:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-16 02:20:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:20:00 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Jul-16 02:20:00 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.498086 2009.5396227850026 18.999826 2009-Jul-16 02:20:00 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666668 15.983333333333333 2009-Jul-16 02:20:00 LOG4 log_alfabeam: ALFABEAM 1 22.659307063821625 15.985198216415114 2009-Jul-16 02:20:00 LOG4 log_alfabeam: ALFABEAM 2 22.663202896290127 15.904817062175574 2009-Jul-16 02:20:00 LOG4 log_alfabeam: ALFABEAM 3 22.670559827126255 15.902573168908855 2009-Jul-16 02:20:00 LOG4 log_alfabeam: ALFABEAM 4 22.674027568523137 15.981620231818876 2009-Jul-16 02:20:00 LOG4 log_alfabeam: ALFABEAM 5 22.670108384879939 16.062251143513507 2009-Jul-16 02:20:00 LOG4 log_alfabeam: ALFABEAM 6 22.662744931544129 16.063584954842614 2009-Jul-16 02:20:00 INFO2 take_data: Starting WAPP+GALFA scan: 919700065 2009-Jul-16 02:20:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:20:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:20:01 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Jul-16 02:20:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:20:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Jul-16 02:20:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:20:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:20:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:20:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22802.00 2009-Jul-16 02:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 2.178 (still bad) 2009-Jul-16 02:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:20:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 2.022 (still bad) 2009-Jul-16 02:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 2.022 (still bad) 2009-Jul-16 02:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 2.024 (still bad) 2009-Jul-16 02:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 2.024 (still bad) 2009-Jul-16 02:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 2.023 (still bad) 2009-Jul-16 02:20:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:20:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:20:12 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Jul-16 02:20:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:20:12 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Jul-16 02:20:12 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2009-Jul-16 02:20:12 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2009-Jul-16 02:20:12 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2009-Jul-16 02:20:12 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:20:12 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53962 J 2009-Jul-16 02:20:12 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:20:12 LOG2 antvel: Parameters to Doppler: Topocentric 22812 2009 197 0.0 2009-Jul-16 02:20:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:20:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2009-Jul-16 02:20:12 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2009-Jul-16 02:20:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:20:12 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:20:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Jul-16 02:20:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:20:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-16 02:20:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:20:12 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Jul-16 02:20:12 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.501428 2009.5396231652596 18.999933 2009-Jul-16 02:20:12 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666668 15.983333333333329 2009-Jul-16 02:20:12 LOG4 log_alfabeam: ALFABEAM 1 22.659307098291869 15.985225847082638 2009-Jul-16 02:20:12 LOG4 log_alfabeam: ALFABEAM 2 22.663201455181582 15.904830548220410 2009-Jul-16 02:20:12 LOG4 log_alfabeam: ALFABEAM 3 22.670558344990294 15.902557997587202 2009-Jul-16 02:20:12 LOG4 log_alfabeam: ALFABEAM 4 22.674027539985548 15.981593211312953 2009-Jul-16 02:20:12 LOG4 log_alfabeam: ALFABEAM 5 22.670109760644458 16.062238967681878 2009-Jul-16 02:20:12 LOG4 log_alfabeam: ALFABEAM 6 22.662746330060440 16.063598771807062 2009-Jul-16 02:20:12 INFO2 take_data: Starting WAPP+GALFA scan: 919700066 2009-Jul-16 02:20:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:20:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:20:13 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Jul-16 02:20:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:20:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Jul-16 02:20:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:20:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:20:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:20:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22814.00 2009-Jul-16 02:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 2.020 (still bad) 2009-Jul-16 02:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:20:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 2.013 (still bad) 2009-Jul-16 02:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 2.013 (still bad) 2009-Jul-16 02:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 2.010 (still bad) 2009-Jul-16 02:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 2.011 (still bad) 2009-Jul-16 02:20:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:20:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:20:24 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Jul-16 02:20:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:20:24 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Jul-16 02:20:24 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2009-Jul-16 02:20:24 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2009-Jul-16 02:20:24 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2009-Jul-16 02:20:24 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:20:24 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53962 J 2009-Jul-16 02:20:24 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:20:24 LOG2 antvel: Parameters to Doppler: Topocentric 22824 2009 197 0.0 2009-Jul-16 02:20:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:20:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2009-Jul-16 02:20:24 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2009-Jul-16 02:20:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:20:24 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:20:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Jul-16 02:20:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:20:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-16 02:20:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:20:24 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Jul-16 02:20:24 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.504771 2009.5396235455166 18.999933 2009-Jul-16 02:20:24 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333340 2009-Jul-16 02:20:24 LOG4 log_alfabeam: ALFABEAM 1 22.659307134059809 15.985253547664451 2009-Jul-16 02:20:24 LOG4 log_alfabeam: ALFABEAM 2 22.663200013977168 15.904844066310879 2009-Jul-16 02:20:24 LOG4 log_alfabeam: ALFABEAM 3 22.670556861428370 15.902542784035752 2009-Jul-16 02:20:24 LOG4 log_alfabeam: ALFABEAM 4 22.674027510225507 15.981566126286525 2009-Jul-16 02:20:24 LOG4 log_alfabeam: ALFABEAM 5 22.670111136137983 16.062226766601427 2009-Jul-16 02:20:24 LOG4 log_alfabeam: ALFABEAM 6 22.662747729502104 16.063612623671954 2009-Jul-16 02:20:24 INFO2 take_data: Starting WAPP+GALFA scan: 919700067 2009-Jul-16 02:20:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:20:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:20:25 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Jul-16 02:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 2.014 (still bad) 2009-Jul-16 02:20:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:20:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Jul-16 02:20:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:20:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:20:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:20:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22826.00 2009-Jul-16 02:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 2.013 (still bad) 2009-Jul-16 02:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:20:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jul-16 02:20:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.906 1.801 1.515 1.487 2009-Jul-16 02:20:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.757 1.704 1.562 1.254 2009-Jul-16 02:20:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.230 0.693 1.997 1.609 2009-Jul-16 02:20:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.204 0.104 1.328 0.127 2009-Jul-16 02:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.999 (still bad) 2009-Jul-16 02:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.998 (still bad) 2009-Jul-16 02:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.997 (still bad) 2009-Jul-16 02:20:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:20:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:20:36 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Jul-16 02:20:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:20:36 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Jul-16 02:20:36 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2009-Jul-16 02:20:36 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2009-Jul-16 02:20:36 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2009-Jul-16 02:20:36 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:20:36 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53962 J 2009-Jul-16 02:20:36 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:20:36 LOG2 antvel: Parameters to Doppler: Topocentric 22836 2009 197 0.0 2009-Jul-16 02:20:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:20:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2009-Jul-16 02:20:36 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2009-Jul-16 02:20:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:20:36 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:20:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Jul-16 02:20:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:20:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-16 02:20:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:20:36 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Jul-16 02:20:36 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.508113 2009.5396239257739 18.999933 2009-Jul-16 02:20:36 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666668 15.983333333333333 2009-Jul-16 02:20:36 LOG4 log_alfabeam: ALFABEAM 1 22.659307170621869 15.985281474205165 2009-Jul-16 02:20:36 LOG4 log_alfabeam: ALFABEAM 2 22.663198561329104 15.904857698868401 2009-Jul-16 02:20:36 LOG4 log_alfabeam: ALFABEAM 3 22.670555365534490 15.902527453780896 2009-Jul-16 02:20:36 LOG4 log_alfabeam: ALFABEAM 4 22.674027479729734 15.981538818390444 2009-Jul-16 02:20:36 LOG4 log_alfabeam: ALFABEAM 5 22.670112522810282 16.062214458557655 2009-Jul-16 02:20:36 LOG4 log_alfabeam: ALFABEAM 6 22.662749140770167 16.063626586219211 2009-Jul-16 02:20:36 INFO2 take_data: Starting WAPP+GALFA scan: 919700068 2009-Jul-16 02:20:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:20:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:20:37 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Jul-16 02:20:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:20:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Jul-16 02:20:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:20:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:20:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.997 (still bad) 2009-Jul-16 02:20:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22838.00 2009-Jul-16 02:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:20:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.997 (still bad) 2009-Jul-16 02:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.990 (still bad) 2009-Jul-16 02:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.992 (still bad) 2009-Jul-16 02:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.989 (still bad) 2009-Jul-16 02:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.989 (still bad) 2009-Jul-16 02:20:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:20:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:20:48 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Jul-16 02:20:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:20:48 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Jul-16 02:20:48 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2009-Jul-16 02:20:48 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2009-Jul-16 02:20:48 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2009-Jul-16 02:20:48 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:20:48 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53962 J 2009-Jul-16 02:20:48 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:20:48 LOG2 antvel: Parameters to Doppler: Topocentric 22848 2009 197 0.0 2009-Jul-16 02:20:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:20:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2009-Jul-16 02:20:48 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2009-Jul-16 02:20:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:20:48 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:20:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Jul-16 02:20:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:20:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-16 02:20:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:20:48 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Jul-16 02:20:48 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.511456 2009.5396243060309 18.999933 2009-Jul-16 02:20:48 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333345 2009-Jul-16 02:20:48 LOG4 log_alfabeam: ALFABEAM 1 22.659307208015317 15.985309645362470 2009-Jul-16 02:20:48 LOG4 log_alfabeam: ALFABEAM 2 22.663197096273660 15.904871455131371 2009-Jul-16 02:20:48 LOG4 log_alfabeam: ALFABEAM 3 22.670553856302366 15.902511996738024 2009-Jul-16 02:20:48 LOG4 log_alfabeam: ALFABEAM 4 22.674027448465360 15.981511269363805 2009-Jul-16 02:20:48 LOG4 log_alfabeam: ALFABEAM 5 22.670113921583841 16.062202035176650 2009-Jul-16 02:20:48 LOG4 log_alfabeam: ALFABEAM 6 22.662750564815241 16.063640668669692 2009-Jul-16 02:20:48 INFO2 take_data: Starting WAPP+GALFA scan: 919700069 2009-Jul-16 02:20:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:20:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:20:49 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Jul-16 02:20:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:20:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Jul-16 02:20:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:20:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:20:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.989 (still bad) 2009-Jul-16 02:20:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22850.00 2009-Jul-16 02:20:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:20:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:20:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:20:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:20:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:20:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:20:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:20:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:20:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.989 (still bad) 2009-Jul-16 02:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.995 (still bad) 2009-Jul-16 02:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.993 (still bad) 2009-Jul-16 02:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.994 (still bad) 2009-Jul-16 02:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.991 (still bad) 2009-Jul-16 02:21:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:21:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:21:00 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Jul-16 02:21:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:21:00 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Jul-16 02:21:00 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2009-Jul-16 02:21:00 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2009-Jul-16 02:21:00 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2009-Jul-16 02:21:00 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:21:00 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53962 J 2009-Jul-16 02:21:00 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:21:00 LOG2 antvel: Parameters to Doppler: Topocentric 22860 2009 197 0.0 2009-Jul-16 02:21:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:21:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2009-Jul-16 02:21:00 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2009-Jul-16 02:21:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:21:00 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:21:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Jul-16 02:21:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:21:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-16 02:21:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:21:00 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Jul-16 02:21:00 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.514798 2009.5396246862879 18.999933 2009-Jul-16 02:21:00 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333327 2009-Jul-16 02:21:00 LOG4 log_alfabeam: ALFABEAM 1 22.659307246233464 15.985338046248620 2009-Jul-16 02:21:00 LOG4 log_alfabeam: ALFABEAM 2 22.663195619591946 15.904885327962690 2009-Jul-16 02:21:00 LOG4 log_alfabeam: ALFABEAM 3 22.670552334522572 15.902496421235567 2009-Jul-16 02:21:00 LOG4 log_alfabeam: ALFABEAM 4 22.674027416436200 15.981483493748870 2009-Jul-16 02:21:00 LOG4 log_alfabeam: ALFABEAM 5 22.670115331715419 16.062189502870645 2009-Jul-16 02:21:00 LOG4 log_alfabeam: ALFABEAM 6 22.662752000892635 16.063654863471495 2009-Jul-16 02:21:00 INFO2 take_data: Starting WAPP+GALFA scan: 919700070 2009-Jul-16 02:21:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:21:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:21:01 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Jul-16 02:21:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:21:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Jul-16 02:21:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:21:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:21:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:21:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22862.00 2009-Jul-16 02:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.993 (still bad) 2009-Jul-16 02:21:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:21:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:21:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:21:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:21:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:21:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:21:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:21:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:21:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.989 (still bad) 2009-Jul-16 02:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.992 (still bad) 2009-Jul-16 02:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.988 (still bad) 2009-Jul-16 02:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.991 (still bad) 2009-Jul-16 02:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.991 (still bad) 2009-Jul-16 02:21:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:21:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:21:12 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Jul-16 02:21:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:21:12 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Jul-16 02:21:12 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Jul-16 02:21:12 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Jul-16 02:21:12 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Jul-16 02:21:12 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jul-16 02:21:12 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jul-16 02:21:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-16 02:21:12 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Jul-16 02:21:12 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-16 02:21:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-16 02:21:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-16 02:21:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-16 02:21:12 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Jul-16 02:21:12 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Jul-16 02:21:12 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2009-Jul-16 02:21:12 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2009-Jul-16 02:21:12 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-Jul-16 02:21:12 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:21:12 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53963 J 2009-Jul-16 02:21:12 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:21:12 LOG2 antvel: Parameters to Doppler: Topocentric 22872 2009 197 0.0 2009-Jul-16 02:21:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:21:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-Jul-16 02:21:12 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-Jul-16 02:21:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:21:12 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:21:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Jul-16 02:21:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:21:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-16 02:21:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:21:12 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Jul-16 02:21:12 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.518141 2009.5396250665449 18.999933 2009-Jul-16 02:21:12 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666671 15.983333333333345 2009-Jul-16 02:21:12 LOG4 log_alfabeam: ALFABEAM 1 22.659307285315158 15.985366695848835 2009-Jul-16 02:21:12 LOG4 log_alfabeam: ALFABEAM 2 22.663194130303854 15.904899326771263 2009-Jul-16 02:21:12 LOG4 log_alfabeam: ALFABEAM 3 22.670550799170734 15.902480717024282 2009-Jul-16 02:21:12 LOG4 log_alfabeam: ALFABEAM 4 22.674027383607942 15.981455472961818 2009-Jul-16 02:21:12 LOG4 log_alfabeam: ALFABEAM 5 22.670116754143539 16.062176853106596 2009-Jul-16 02:21:12 LOG4 log_alfabeam: ALFABEAM 6 22.662753449970328 16.063669180001646 2009-Jul-16 02:21:12 INFO2 take_data: Starting WAPP+GALFA scan: 919700071 2009-Jul-16 02:21:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:21:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:21:13 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Jul-16 02:21:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:21:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Jul-16 02:21:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:21:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:21:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:21:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22874.00 2009-Jul-16 02:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.991 (still bad) 2009-Jul-16 02:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:21:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.191 (still bad) 2009-Jul-16 02:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.194 (still bad) 2009-Jul-16 02:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.192 (still bad) 2009-Jul-16 02:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.196 (still bad) 2009-Jul-16 02:21:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:21:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:21:24 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Jul-16 02:21:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:21:24 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Jul-16 02:21:24 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2009-Jul-16 02:21:24 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2009-Jul-16 02:21:24 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2009-Jul-16 02:21:24 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:21:24 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53963 J 2009-Jul-16 02:21:24 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:21:24 LOG2 antvel: Parameters to Doppler: Topocentric 22884 2009 197 0.0 2009-Jul-16 02:21:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:21:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2009-Jul-16 02:21:24 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2009-Jul-16 02:21:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:21:24 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:21:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Jul-16 02:21:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:21:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-16 02:21:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:21:24 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Jul-16 02:21:24 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.521483 2009.5396254468021 18.999933 2009-Jul-16 02:21:24 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333336 2009-Jul-16 02:21:24 LOG4 log_alfabeam: ALFABEAM 1 22.659307325253245 15.985395579033318 2009-Jul-16 02:21:24 LOG4 log_alfabeam: ALFABEAM 2 22.663192629202932 15.904913444301931 2009-Jul-16 02:21:24 LOG4 log_alfabeam: ALFABEAM 3 22.670549251050392 15.902464892562309 2009-Jul-16 02:21:24 LOG4 log_alfabeam: ALFABEAM 4 22.674027349984772 15.981427221783525 2009-Jul-16 02:21:24 LOG4 log_alfabeam: ALFABEAM 5 22.670118188112792 16.062164092406846 2009-Jul-16 02:21:24 LOG4 log_alfabeam: ALFABEAM 6 22.662754911291135 16.063683610585592 2009-Jul-16 02:21:24 INFO2 take_data: Starting WAPP+GALFA scan: 919700072 2009-Jul-16 02:21:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:21:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:21:25 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Jul-16 02:21:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:21:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Jul-16 02:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.196 (still bad) 2009-Jul-16 02:21:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:21:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:21:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:21:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22886.00 2009-Jul-16 02:21:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:21:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:21:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:21:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:21:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:21:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:21:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:21:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:21:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.184 (still bad) 2009-Jul-16 02:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 02:21:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jul-16 02:21:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.114 1.071 0.900 0.908 2009-Jul-16 02:21:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.045 1.030 0.873 0.738 2009-Jul-16 02:21:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.652 0.404 1.110 1.023 2009-Jul-16 02:21:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.667 0.104 0.725 0.127 2009-Jul-16 02:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 02:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 02:21:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:21:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:21:36 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Jul-16 02:21:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:21:36 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Jul-16 02:21:36 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2009-Jul-16 02:21:36 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2009-Jul-16 02:21:36 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2009-Jul-16 02:21:36 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:21:36 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53963 J 2009-Jul-16 02:21:36 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:21:36 LOG2 antvel: Parameters to Doppler: Topocentric 22896 2009 197 0.0 2009-Jul-16 02:21:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:21:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2009-Jul-16 02:21:36 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2009-Jul-16 02:21:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:21:36 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:21:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Jul-16 02:21:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:21:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-16 02:21:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:21:36 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Jul-16 02:21:36 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.524826 2009.5396258270591 18.999933 2009-Jul-16 02:21:36 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333327 2009-Jul-16 02:21:36 LOG4 log_alfabeam: ALFABEAM 1 22.659307366088203 15.985424715120732 2009-Jul-16 02:21:36 LOG4 log_alfabeam: ALFABEAM 2 22.663191115292395 15.904927690137463 2009-Jul-16 02:21:36 LOG4 log_alfabeam: ALFABEAM 3 22.670547689118706 15.902448937432990 2009-Jul-16 02:21:36 LOG4 log_alfabeam: ALFABEAM 4 22.674027315530850 15.981398721301204 2009-Jul-16 02:21:36 LOG4 log_alfabeam: ALFABEAM 5 22.670119634578011 16.062151212075907 2009-Jul-16 02:21:36 LOG4 log_alfabeam: ALFABEAM 6 22.662756385840723 16.063698164758915 2009-Jul-16 02:21:36 INFO2 take_data: Starting WAPP+GALFA scan: 919700073 2009-Jul-16 02:21:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:21:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:21:37 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Jul-16 02:21:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:21:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Jul-16 02:21:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:21:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:21:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 02:21:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22898.00 2009-Jul-16 02:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 02:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Jul-16 02:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jul-16 02:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 02:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 02:21:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:21:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:21:48 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Jul-16 02:21:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:21:48 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Jul-16 02:21:48 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2009-Jul-16 02:21:48 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2009-Jul-16 02:21:48 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2009-Jul-16 02:21:48 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:21:48 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53963 J 2009-Jul-16 02:21:48 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:21:48 LOG2 antvel: Parameters to Doppler: Topocentric 22908 2009 197 0.0 2009-Jul-16 02:21:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:21:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2009-Jul-16 02:21:48 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2009-Jul-16 02:21:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:21:48 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:21:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Jul-16 02:21:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:21:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-16 02:21:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:21:48 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Jul-16 02:21:48 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.528168 2009.5396262073161 18.999933 2009-Jul-16 02:21:48 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333333 2009-Jul-16 02:21:48 LOG4 log_alfabeam: ALFABEAM 1 22.659307407812456 15.985454088735713 2009-Jul-16 02:21:48 LOG4 log_alfabeam: ALFABEAM 2 22.663189589378472 15.904942056902861 2009-Jul-16 02:21:48 LOG4 log_alfabeam: ALFABEAM 3 22.670546114192408 15.902432860226144 2009-Jul-16 02:21:48 LOG4 log_alfabeam: ALFABEAM 4 22.674027280250790 15.981369986538025 2009-Jul-16 02:21:48 LOG4 log_alfabeam: ALFABEAM 5 22.670121092771495 16.062138218748057 2009-Jul-16 02:21:48 LOG4 log_alfabeam: ALFABEAM 6 22.662757872849298 16.063712834722704 2009-Jul-16 02:21:48 INFO2 take_data: Starting WAPP+GALFA scan: 919700074 2009-Jul-16 02:21:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:21:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:21:49 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Jul-16 02:21:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:21:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Jul-16 02:21:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:21:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:21:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:21:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22910.00 2009-Jul-16 02:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 02:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:21:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Jul-16 02:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Jul-16 02:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 02:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Jul-16 02:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Jul-16 02:22:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:22:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:22:00 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Jul-16 02:22:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:22:00 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Jul-16 02:22:00 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2009-Jul-16 02:22:00 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2009-Jul-16 02:22:00 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2009-Jul-16 02:22:00 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:22:00 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53963 J 2009-Jul-16 02:22:00 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:22:00 LOG2 antvel: Parameters to Doppler: Topocentric 22920 2009 197 0.0 2009-Jul-16 02:22:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:22:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2009-Jul-16 02:22:00 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2009-Jul-16 02:22:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:22:00 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:22:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Jul-16 02:22:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:22:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-16 02:22:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:22:00 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Jul-16 02:22:00 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.531511 2009.5396265875731 18.999933 2009-Jul-16 02:22:00 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333336 2009-Jul-16 02:22:00 LOG4 log_alfabeam: ALFABEAM 1 22.659307450468141 15.985483719536509 2009-Jul-16 02:22:00 LOG4 log_alfabeam: ALFABEAM 2 22.663188050447374 15.904956554358316 2009-Jul-16 02:22:00 LOG4 log_alfabeam: ALFABEAM 3 22.670544525209817 15.902416650354967 2009-Jul-16 02:22:00 LOG4 log_alfabeam: ALFABEAM 4 22.674027244107126 15.981340998246235 2009-Jul-16 02:22:00 LOG4 log_alfabeam: ALFABEAM 5 22.670122563664641 16.062125103562121 2009-Jul-16 02:22:00 LOG4 log_alfabeam: ALFABEAM 6 22.662759373320508 16.063727630173783 2009-Jul-16 02:22:00 INFO2 take_data: Starting WAPP+GALFA scan: 919700075 2009-Jul-16 02:22:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:22:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:22:01 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Jul-16 02:22:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:22:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Jul-16 02:22:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:22:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:22:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:22:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22922.00 2009-Jul-16 02:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Jul-16 02:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Jul-16 02:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Jul-16 02:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Jul-16 02:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Jul-16 02:22:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:22:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:22:12 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Jul-16 02:22:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:22:12 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Jul-16 02:22:12 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2009-Jul-16 02:22:12 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2009-Jul-16 02:22:12 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2009-Jul-16 02:22:12 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:22:12 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53963 J 2009-Jul-16 02:22:12 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:22:12 LOG2 antvel: Parameters to Doppler: Topocentric 22932 2009 197 0.0 2009-Jul-16 02:22:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:22:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2009-Jul-16 02:22:12 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2009-Jul-16 02:22:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:22:12 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:22:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Jul-16 02:22:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:22:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-16 02:22:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:22:12 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Jul-16 02:22:12 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.534853 2009.5396269678301 18.999933 2009-Jul-16 02:22:12 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333348 2009-Jul-16 02:22:12 LOG4 log_alfabeam: ALFABEAM 1 22.659307494047216 15.985513591898469 2009-Jul-16 02:22:12 LOG4 log_alfabeam: ALFABEAM 2 22.663186499318162 15.904971175007041 2009-Jul-16 02:22:12 LOG4 log_alfabeam: ALFABEAM 3 22.670542923001058 15.902400316542662 2009-Jul-16 02:22:12 LOG4 log_alfabeam: ALFABEAM 4 22.674027207104889 15.981311771694687 2009-Jul-16 02:22:12 LOG4 log_alfabeam: ALFABEAM 5 22.670124046477262 16.062111873265909 2009-Jul-16 02:22:12 LOG4 log_alfabeam: ALFABEAM 6 22.662760886471744 16.063742543186990 2009-Jul-16 02:22:12 INFO2 take_data: Starting WAPP+GALFA scan: 919700076 2009-Jul-16 02:22:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:22:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:22:13 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Jul-16 02:22:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:22:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Jul-16 02:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Jul-16 02:22:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:22:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:22:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:22:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22934.00 2009-Jul-16 02:22:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:22:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:22:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:22:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:22:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:22:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:22:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:22:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:22:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Jul-16 02:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Jul-16 02:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 02:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 02:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 02:22:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:22:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:22:24 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Jul-16 02:22:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:22:24 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Jul-16 02:22:24 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2009-Jul-16 02:22:24 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2009-Jul-16 02:22:24 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2009-Jul-16 02:22:24 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:22:24 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53963 J 2009-Jul-16 02:22:24 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:22:24 LOG2 antvel: Parameters to Doppler: Topocentric 22944 2009 197 0.0 2009-Jul-16 02:22:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:22:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2009-Jul-16 02:22:24 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2009-Jul-16 02:22:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:22:24 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:22:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Jul-16 02:22:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:22:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Jul-16 02:22:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:22:24 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Jul-16 02:22:24 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.538196 2009.5396273480874 18.999933 2009-Jul-16 02:22:24 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333336 2009-Jul-16 02:22:24 LOG4 log_alfabeam: ALFABEAM 1 22.659307538593580 15.985543725825679 2009-Jul-16 02:22:24 LOG4 log_alfabeam: ALFABEAM 2 22.663184934959794 15.904985928790333 2009-Jul-16 02:22:24 LOG4 log_alfabeam: ALFABEAM 3 22.670541306485259 15.902383848029633 2009-Jul-16 02:22:24 LOG4 log_alfabeam: ALFABEAM 4 22.674027169205019 15.981282287294624 2009-Jul-16 02:22:24 LOG4 log_alfabeam: ALFABEAM 5 22.670125542197646 16.062098518829142 2009-Jul-16 02:22:24 LOG4 log_alfabeam: ALFABEAM 6 22.662762413325019 16.063757583623044 2009-Jul-16 02:22:24 INFO2 take_data: Starting WAPP+GALFA scan: 919700077 2009-Jul-16 02:22:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:22:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:22:25 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Jul-16 02:22:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:22:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Jul-16 02:22:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:22:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:22:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 02:22:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22946.00 2009-Jul-16 02:22:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:22:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:22:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:22:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:22:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:22:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:22:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:22:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:22:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 02:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jul-16 02:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2009-Jul-16 02:22:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jul-16 02:22:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.118 1.065 0.901 0.906 2009-Jul-16 02:22:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.038 1.010 0.855 0.733 2009-Jul-16 02:22:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.651 0.406 1.104 1.005 2009-Jul-16 02:22:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.674 0.104 0.732 0.128 2009-Jul-16 02:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2009-Jul-16 02:22:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:22:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:22:36 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Jul-16 02:22:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:22:36 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Jul-16 02:22:36 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Jul-16 02:22:36 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jul-16 02:22:36 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jul-16 02:22:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-16 02:22:36 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Jul-16 02:22:36 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-16 02:22:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jul-16 02:22:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-16 02:22:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-16 02:22:36 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Jul-16 02:22:36 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2009-Jul-16 02:22:36 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2009-Jul-16 02:22:36 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-Jul-16 02:22:36 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:22:36 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53963 J 2009-Jul-16 02:22:36 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:22:36 LOG2 antvel: Parameters to Doppler: Topocentric 22956 2009 197 0.0 2009-Jul-16 02:22:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:22:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-Jul-16 02:22:36 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-Jul-16 02:22:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:22:36 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:22:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Jul-16 02:22:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:22:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-16 02:22:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:22:36 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Jul-16 02:22:36 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.541538 2009.5396277283444 18.999933 2009-Jul-16 02:22:36 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333329 2009-Jul-16 02:22:36 LOG4 log_alfabeam: ALFABEAM 1 22.659307584098709 15.985574105440589 2009-Jul-16 02:22:36 LOG4 log_alfabeam: ALFABEAM 2 22.663183358204332 15.905000808087685 2009-Jul-16 02:22:36 LOG4 log_alfabeam: ALFABEAM 3 22.670539676506110 15.902367253674356 2009-Jul-16 02:22:36 LOG4 log_alfabeam: ALFABEAM 4 22.674027130412917 15.981252560564204 2009-Jul-16 02:22:36 LOG4 log_alfabeam: ALFABEAM 5 22.670127050032900 16.062085047115087 2009-Jul-16 02:22:36 LOG4 log_alfabeam: ALFABEAM 6 22.662763953084685 16.063772743428849 2009-Jul-16 02:22:36 INFO2 take_data: Starting WAPP+GALFA scan: 919700078 2009-Jul-16 02:22:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:22:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:22:37 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Jul-16 02:22:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:22:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Jul-16 02:22:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:22:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:22:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:22:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22958.00 2009-Jul-16 02:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.118 (still bad) 2009-Jul-16 02:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 2.185 (still bad) 2009-Jul-16 02:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 2.184 (still bad) 2009-Jul-16 02:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 2.178 (still bad) 2009-Jul-16 02:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 2.177 (still bad) 2009-Jul-16 02:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 2.180 (still bad) 2009-Jul-16 02:22:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:22:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:22:48 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Jul-16 02:22:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:22:48 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Jul-16 02:22:48 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2009-Jul-16 02:22:48 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2009-Jul-16 02:22:48 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2009-Jul-16 02:22:48 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:22:48 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53963 J 2009-Jul-16 02:22:48 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:22:48 LOG2 antvel: Parameters to Doppler: Topocentric 22968 2009 197 0.0 2009-Jul-16 02:22:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:22:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2009-Jul-16 02:22:48 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2009-Jul-16 02:22:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:22:48 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:22:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Jul-16 02:22:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:22:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-16 02:22:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:22:48 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Jul-16 02:22:48 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.544880 2009.5396281086014 18.999933 2009-Jul-16 02:22:48 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333340 2009-Jul-16 02:22:48 LOG4 log_alfabeam: ALFABEAM 1 22.659307630594249 15.985604741893782 2009-Jul-16 02:22:48 LOG4 log_alfabeam: ALFABEAM 2 22.663181768480818 15.905015818514119 2009-Jul-16 02:22:48 LOG4 log_alfabeam: ALFABEAM 3 22.670538032457255 15.902350527566242 2009-Jul-16 02:22:48 LOG4 log_alfabeam: ALFABEAM 4 22.674027090699859 15.981222580576102 2009-Jul-16 02:22:48 LOG4 log_alfabeam: ALFABEAM 5 22.670128570531638 16.062071453006890 2009-Jul-16 02:22:48 LOG4 log_alfabeam: ALFABEAM 6 22.662765506324703 16.063788028039408 2009-Jul-16 02:22:48 INFO2 take_data: Starting WAPP+GALFA scan: 919700079 2009-Jul-16 02:22:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:22:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:22:49 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Jul-16 02:22:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:22:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Jul-16 02:22:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:22:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:22:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:22:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22970.00 2009-Jul-16 02:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 2.183 (still bad) 2009-Jul-16 02:22:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:22:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:22:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:22:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:22:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:22:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:22:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:22:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:22:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 2.024 (still bad) 2009-Jul-16 02:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 2.024 (still bad) 2009-Jul-16 02:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 2.022 (still bad) 2009-Jul-16 02:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 2.028 (still bad) 2009-Jul-16 02:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 2.027 (still bad) 2009-Jul-16 02:23:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:23:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:23:00 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Jul-16 02:23:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:23:00 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Jul-16 02:23:00 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2009-Jul-16 02:23:00 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2009-Jul-16 02:23:00 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2009-Jul-16 02:23:00 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:23:00 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53963 J 2009-Jul-16 02:23:00 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:23:00 LOG2 antvel: Parameters to Doppler: Topocentric 22980 2009 197 0.0 2009-Jul-16 02:23:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:23:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2009-Jul-16 02:23:00 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2009-Jul-16 02:23:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:23:00 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:23:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Jul-16 02:23:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:23:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-16 02:23:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:23:00 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Jul-16 02:23:00 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.548223 2009.5396284888584 18.999933 2009-Jul-16 02:23:00 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333343 2009-Jul-16 02:23:00 LOG4 log_alfabeam: ALFABEAM 1 22.659307678113386 15.985635646668195 2009-Jul-16 02:23:00 LOG4 log_alfabeam: ALFABEAM 2 22.663180165201613 15.905030965856970 2009-Jul-16 02:23:00 LOG4 log_alfabeam: ALFABEAM 3 22.670536373713993 15.902333663627008 2009-Jul-16 02:23:00 LOG4 log_alfabeam: ALFABEAM 4 22.674027050035647 15.981192336075228 2009-Jul-16 02:23:00 LOG4 log_alfabeam: ALFABEAM 5 22.670130104258746 16.062057731226762 2009-Jul-16 02:23:00 LOG4 log_alfabeam: ALFABEAM 6 22.662767073636587 16.063803443048641 2009-Jul-16 02:23:00 INFO2 take_data: Starting WAPP+GALFA scan: 919700080 2009-Jul-16 02:23:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:23:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:23:01 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Jul-16 02:23:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:23:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Jul-16 02:23:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:23:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:23:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:23:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22982.00 2009-Jul-16 02:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 2.027 (still bad) 2009-Jul-16 02:23:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:23:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:23:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:23:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:23:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:23:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:23:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:23:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:23:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 2.019 (still bad) 2009-Jul-16 02:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 2.017 (still bad) 2009-Jul-16 02:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 2.016 (still bad) 2009-Jul-16 02:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 2.018 (still bad) 2009-Jul-16 02:23:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:23:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:23:12 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Jul-16 02:23:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:23:12 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Jul-16 02:23:12 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2009-Jul-16 02:23:12 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2009-Jul-16 02:23:12 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2009-Jul-16 02:23:12 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:23:12 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53963 J 2009-Jul-16 02:23:12 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:23:12 LOG2 antvel: Parameters to Doppler: Topocentric 22992 2009 197 0.0 2009-Jul-16 02:23:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:23:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2009-Jul-16 02:23:12 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2009-Jul-16 02:23:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:23:12 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:23:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Jul-16 02:23:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:23:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-16 02:23:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:23:12 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Jul-16 02:23:12 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.551565 2009.5396288691154 18.999933 2009-Jul-16 02:23:12 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333336 2009-Jul-16 02:23:12 LOG4 log_alfabeam: ALFABEAM 1 22.659307726646823 15.985666803499676 2009-Jul-16 02:23:12 LOG4 log_alfabeam: ALFABEAM 2 22.663178549218632 15.905046242306453 2009-Jul-16 02:23:12 LOG4 log_alfabeam: ALFABEAM 3 22.670534701140763 15.902316670921550 2009-Jul-16 02:23:12 LOG4 log_alfabeam: ALFABEAM 4 22.674027008426378 15.981161842960809 2009-Jul-16 02:23:12 LOG4 log_alfabeam: ALFABEAM 5 22.670131650401952 16.062043888814532 2009-Jul-16 02:23:12 LOG4 log_alfabeam: ALFABEAM 6 22.662768654204758 16.063818980208129 2009-Jul-16 02:23:12 INFO2 take_data: Starting WAPP+GALFA scan: 919700081 2009-Jul-16 02:23:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:23:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:23:13 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Jul-16 02:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 2.019 (still bad) 2009-Jul-16 02:23:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:23:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Jul-16 02:23:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:23:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:23:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:23:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22994.00 2009-Jul-16 02:23:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:23:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:23:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:23:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:23:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:23:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:23:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:23:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 2.019 (still bad) 2009-Jul-16 02:23:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 2.001 (still bad) 2009-Jul-16 02:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.997 (still bad) 2009-Jul-16 02:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 2.000 (still bad) 2009-Jul-16 02:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 2.001 (still bad) 2009-Jul-16 02:23:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:23:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:23:24 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Jul-16 02:23:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:23:24 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Jul-16 02:23:24 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2009-Jul-16 02:23:24 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2009-Jul-16 02:23:24 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2009-Jul-16 02:23:24 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:23:24 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53963 J 2009-Jul-16 02:23:24 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:23:24 LOG2 antvel: Parameters to Doppler: Topocentric 23004 2009 197 0.0 2009-Jul-16 02:23:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:23:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2009-Jul-16 02:23:24 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2009-Jul-16 02:23:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:23:24 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:23:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Jul-16 02:23:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:23:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-16 02:23:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:23:24 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Jul-16 02:23:24 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.554908 2009.5396292493726 18.999933 2009-Jul-16 02:23:24 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333343 2009-Jul-16 02:23:24 LOG4 log_alfabeam: ALFABEAM 1 22.659307776243139 15.985698233285415 2009-Jul-16 02:23:24 LOG4 log_alfabeam: ALFABEAM 2 22.663176919456369 15.905061658273349 2009-Jul-16 02:23:24 LOG4 log_alfabeam: ALFABEAM 3 22.670533013607088 15.902299538245847 2009-Jul-16 02:23:24 LOG4 log_alfabeam: ALFABEAM 4 22.674026965828602 15.981131080763397 2009-Jul-16 02:23:24 LOG4 log_alfabeam: ALFABEAM 5 22.670133209993107 16.062029916301533 2009-Jul-16 02:23:24 LOG4 log_alfabeam: ALFABEAM 6 22.662770249098767 16.063834649800111 2009-Jul-16 02:23:24 INFO2 take_data: Starting WAPP+GALFA scan: 919700082 2009-Jul-16 02:23:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:23:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:23:25 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Jul-16 02:23:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:23:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Jul-16 02:23:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:23:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:23:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.999 (still bad) 2009-Jul-16 02:23:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23006.00 2009-Jul-16 02:23:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:23:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:23:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:23:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:23:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:23:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:23:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:23:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:23:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.999 (still bad) 2009-Jul-16 02:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.991 (still bad) 2009-Jul-16 02:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.990 (still bad) 2009-Jul-16 02:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.987 (still bad) 2009-Jul-16 02:23:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Jul-16 02:23:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.908 1.798 1.521 1.489 2009-Jul-16 02:23:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.758 1.699 1.555 1.260 2009-Jul-16 02:23:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.233 0.699 1.990 1.604 2009-Jul-16 02:23:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.213 0.105 1.340 0.128 2009-Jul-16 02:23:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:23:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:23:36 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Jul-16 02:23:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:23:36 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Jul-16 02:23:36 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2009-Jul-16 02:23:36 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2009-Jul-16 02:23:36 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2009-Jul-16 02:23:36 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:23:36 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53963 J 2009-Jul-16 02:23:36 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:23:36 LOG2 antvel: Parameters to Doppler: Topocentric 23016 2009 197 0.0 2009-Jul-16 02:23:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:23:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2009-Jul-16 02:23:36 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2009-Jul-16 02:23:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:23:36 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:23:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Jul-16 02:23:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:23:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-16 02:23:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:23:36 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Jul-16 02:23:36 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.558250 2009.5396296296296 18.999933 2009-Jul-16 02:23:36 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666661 15.983333333333336 2009-Jul-16 02:23:36 LOG4 log_alfabeam: ALFABEAM 1 22.659307826892526 15.985729919498688 2009-Jul-16 02:23:36 LOG4 log_alfabeam: ALFABEAM 2 22.663175276780219 15.905077205819120 2009-Jul-16 02:23:36 LOG4 log_alfabeam: ALFABEAM 3 22.670531311991514 15.902282274804941 2009-Jul-16 02:23:36 LOG4 log_alfabeam: ALFABEAM 4 22.674026922248871 15.981100065641064 2009-Jul-16 02:23:36 LOG4 log_alfabeam: ALFABEAM 5 22.670134782206791 16.062015820847630 2009-Jul-16 02:23:36 LOG4 log_alfabeam: ALFABEAM 6 22.662771857489496 16.063850443443620 2009-Jul-16 02:23:36 INFO2 take_data: Starting WAPP+GALFA scan: 919700083 2009-Jul-16 02:23:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:23:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:23:37 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Jul-16 02:23:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:23:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Jul-16 02:23:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:23:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:23:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.990 (still bad) 2009-Jul-16 02:23:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23018.00 2009-Jul-16 02:23:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:23:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:23:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:23:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:23:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:23:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:23:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:23:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:23:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.991 (still bad) 2009-Jul-16 02:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.994 (still bad) 2009-Jul-16 02:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.996 (still bad) 2009-Jul-16 02:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.995 (still bad) 2009-Jul-16 02:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.995 (still bad) 2009-Jul-16 02:23:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:23:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:23:48 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Jul-16 02:23:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:23:48 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Jul-16 02:23:48 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2009-Jul-16 02:23:48 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2009-Jul-16 02:23:48 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2009-Jul-16 02:23:48 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:23:48 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53963 J 2009-Jul-16 02:23:48 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:23:48 LOG2 antvel: Parameters to Doppler: Topocentric 23028 2009 197 0.0 2009-Jul-16 02:23:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:23:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2009-Jul-16 02:23:48 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2009-Jul-16 02:23:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:23:48 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:23:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Jul-16 02:23:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:23:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Jul-16 02:23:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Jul-16 02:23:48 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Jul-16 02:23:48 LOG5 log_alfabeam: Parameters: 22.666666666666668 15.983333333333333 21.561593 2009.5396300098867 18.999933 2009-Jul-16 02:23:48 LOG4 log_alfabeam: ALFABEAM 0 22.666666666666664 15.983333333333329 2009-Jul-16 02:23:48 LOG4 log_alfabeam: ALFABEAM 1 22.659307878645564 15.985761883405740 2009-Jul-16 02:23:48 LOG4 log_alfabeam: ALFABEAM 2 22.663173620096313 15.905092895549290 2009-Jul-16 02:23:48 LOG4 log_alfabeam: ALFABEAM 3 22.670529595143030 15.902264869211828 2009-Jul-16 02:23:48 LOG4 log_alfabeam: ALFABEAM 4 22.674026877641854 15.981068776760326 2009-Jul-16 02:23:48 LOG4 log_alfabeam: ALFABEAM 5 22.670136368092805 16.062001592802293 2009-Jul-16 02:23:48 LOG4 log_alfabeam: ALFABEAM 6 22.662773480466143 16.063866371594358 2009-Jul-16 02:23:48 INFO2 take_data: Starting WAPP+GALFA scan: 919700084 2009-Jul-16 02:23:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Jul-16 02:23:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Jul-16 02:23:49 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Jul-16 02:23:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:23:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Jul-16 02:23:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:23:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:23:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:23:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23030.00 2009-Jul-16 02:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.993 (still bad) 2009-Jul-16 02:23:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:23:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:23:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:23:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:23:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:23:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:23:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:23:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:23:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.993 (still bad) 2009-Jul-16 02:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.990 (still bad) 2009-Jul-16 02:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.995 (still bad) 2009-Jul-16 02:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.991 (still bad) 2009-Jul-16 02:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.994 (still bad) 2009-Jul-16 02:24:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:24:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Jul-16 02:24:00 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Jul-16 02:24:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Jul-16 02:24:00 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Jul-16 02:24:00 INFO2 smartfreq: Switching off CAL 2009-Jul-16 02:24:00 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jul-16 02:24:00 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jul-16 02:24:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-16 02:24:00 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Jul-16 02:24:00 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-16 02:24:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-16 02:24:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-16 02:24:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-16 02:24:00 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Jul-16 02:24:00 INFO3 restore_frequencies: Restoring original frequencies 2009-Jul-16 02:24:00 LOG5 antvel: Calling 'antvel 224000.000000 155900.000000 J 0' 2009-Jul-16 02:24:00 LOG2 antvel: Precessing RA = 22:40:00.0 Dec = +15:59:00.0 Epoch = 2009.53963 J 2009-Jul-16 02:24:00 LOG2 antvel: Computed apparent RA = 22:40:29.8 Dec = +16:02:03.1 2009-Jul-16 02:24:00 LOG2 antvel: Parameters to Doppler: Topocentric 23040 2009 197 0.0 2009-Jul-16 02:24:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Jul-16 02:24:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2009-Jul-16 02:24:00 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2009-Jul-16 02:24:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:24:00 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:24:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2009-Jul-16 02:24:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:24:00 STOP finish_task: Finishing task 'smart frequency switching' 2009-Jul-16 02:24:00 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Jul-16 02:24:00 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Jul-16 02:24:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-16 02:24:00 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Jul-16 02:24:00 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Jul-16 02:24:00 NOTE run_command_file: DONE with command file processing 2009-Jul-16 02:24:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Jul-16 02:24:00 STOP finish_task: Finishing task 'running command file 'command_galfasrc.cmd'' 2009-Jul-16 02:24:00 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Jul-16 02:24:00 DONE finish_task: DONE finished running: command file 'command_galfasrc.cmd' 2009-Jul-16 02:24:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-16 02:24:01 END end_task: Finishing task 'running command file 'command_galfasrc.cmd'' with status 'OK' 2009-Jul-16 02:24:01 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Jul-16 02:24:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2009-Jul-16 02:24:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:24:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:24:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.997 (still bad) 2009-Jul-16 02:27:25 INFO1 CIMA-run_command_file: Transferring command file '090713.cmd ' to executive ... 2009-Jul-16 02:27:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2009-Jul-16 02:27:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2009-Jul-16 02:27:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 5 {CATALOG AGESFull.cat} 2009-Jul-16 02:27:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF LSTSLEW(AGES7448_p1_001) < 215128 THEN} 2009-Jul-16 02:27:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {FIXEDDRIFT az=268.98 alfaangle=-75.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_001 ra=225000.00 dec=175900.00} 2009-Jul-16 02:27:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {ENDIF} 2009-Jul-16 02:27:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 15 {IF LSTSLEW(AGES7448_p1_003) < 221429 THEN} 2009-Jul-16 02:27:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 16 {FIXEDDRIFT az=271.06 alfaangle=-75.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_003 ra=225000.00 dec=175600.00} 2009-Jul-16 02:27:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 19 {ENDIF} 2009-Jul-16 02:27:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 22 {IF LSTSLEW(AGES7448_p1_005) < 223729 THEN} 2009-Jul-16 02:27:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 23 {FIXEDDRIFT az=277.22 alfaangle=-80.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_005 ra=225000.00 dec=175300.00} 2009-Jul-16 02:27:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 26 {ENDIF} 2009-Jul-16 02:27:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 29 {IF LSTSLEW(AGES7448_p1_007) < 230329 THEN} 2009-Jul-16 02:27:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 30 {FIXEDDRIFT az=81.87 alfaangle=-60.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_007 ra=225000.00 dec=175000.00} 2009-Jul-16 02:27:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 33 {ENDIF} 2009-Jul-16 02:27:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 36 {IF LSTSLEW(AGES7448_p1_009) < 232629 THEN} 2009-Jul-16 02:27:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 37 {FIXEDDRIFT az=87.93 alfaangle=-65.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_009 ra=225000.00 dec=174700.00} 2009-Jul-16 02:27:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 40 {ENDIF} 2009-Jul-16 02:27:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 43 {IF LSTSLEW(AGES7448_p1_011) < 234929 THEN} 2009-Jul-16 02:27:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 44 {FIXEDDRIFT az=89.99 alfaangle=-65.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_011 ra=225000.00 dec=174400.00} 2009-Jul-16 02:27:26 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 47 {ENDIF} 2009-Jul-16 02:27:26 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Jul-16 02:27:26 LOG4 exec_msg: From OBSERVER: run_command_file 090713.cmd 1 1 21 2009-Jul-16 02:27:26 LOG4 run_command_file: Calling 'run_command_file 090713.cmd 1 1 21' 2009-Jul-16 02:27:26 BEGIN begin_task: Starting task 'running command file '090713.cmd'' 2009-Jul-16 02:27:26 LOG5 begin_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Jul-16 02:27:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '090713.cmd' ...} 2009-Jul-16 02:27:26 NOTE run_command_file: Starting execution of command file '090713.cmd' from line 1 2009-Jul-16 02:27:26 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2009-Jul-16 02:27:26 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Jul-16 02:27:26 NOTE CIMA-check_config_file: File 'ages_config.conf' contains an ALFA set-up which will be ignored! 2009-Jul-16 02:27:26 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-16 02:27:26 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Jul-16 02:27:26 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2009-Jul-16 02:27:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Jul-16 02:27:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Jul-16 02:27:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Jul-16 02:27:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Jul-16 02:27:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Jul-16 02:27:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Jul-16 02:27:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Jul-16 02:27:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2009-Jul-16 02:27:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2009-Jul-16 02:27:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2009-Jul-16 02:27:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2009-Jul-16 02:27:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jul-16 02:27:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jul-16 02:27:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jul-16 02:27:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jul-16 02:27:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Jul-16 02:27:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Jul-16 02:27:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Jul-16 02:27:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Jul-16 02:27:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Jul-16 02:27:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Jul-16 02:27:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Jul-16 02:27:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Jul-16 02:27:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jul-16 02:27:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jul-16 02:27:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jul-16 02:27:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jul-16 02:27:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Jul-16 02:27:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Jul-16 02:27:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Jul-16 02:27:28 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-16 02:27:28 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Jul-16 02:27:28 LOG5 begin_task: Level: (2) ID = <10092> Status = 0 0 0 0 ok 2009-Jul-16 02:27:28 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Jul-16 02:27:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Jul-16 02:27:28 LOG1 config_iflo: Receiver ALFA already selected 2009-Jul-16 02:27:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 02:27:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jul-16 02:27:28 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 02:27:28 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2009-Jul-16 02:27:28 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 02:27:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 02:27:28 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2009-Jul-16 02:27:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 02:27:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jul-16 02:27:28 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Jul-16 02:27:28 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Jul-16 02:27:28 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Jul-16 02:27:28 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Jul-16 02:27:28 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Jul-16 02:27:28 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Jul-16 02:27:28 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Jul-16 02:27:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2009-Jul-16 02:27:28 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Jul-16 02:27:28 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Jul-16 02:27:28 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Jul-16 02:27:28 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Jul-16 02:27:28 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Jul-16 02:27:28 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Jul-16 02:27:28 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Jul-16 02:27:28 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Jul-16 02:27:28 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Jul-16 02:27:28 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Jul-16 02:27:28 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Jul-16 02:27:28 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Jul-16 02:27:28 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Jul-16 02:27:28 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Jul-16 02:27:28 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Jul-16 02:27:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:27:28 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Jul-16 02:27:28 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Jul-16 02:27:28 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Jul-16 02:27:28 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Jul-16 02:27:28 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Jul-16 02:27:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Jul-16 02:27:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 02:27:28 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Jul-16 02:27:28 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2009-Jul-16 02:27:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2009-Jul-16 02:27:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Jul-16 02:27:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:27:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 02:27:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:27:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:27:29 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Jul-16 02:27:29 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Jul-16 02:27:29 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2009-Jul-16 02:27:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Jul-16 02:27:29 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Jul-16 02:27:29 LOG5 finish_task: Level: (2) ID = <10092> Status = 0 0 0 0 ok 2009-Jul-16 02:27:29 DONE finish_task: DONE finished configuration: IF/LO path 2009-Jul-16 02:27:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-16 02:27:29 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Jul-16 02:27:29 LOG5 end_task: Level: (2) ID = <10092> Status = 0 0 0 0 ok 2009-Jul-16 02:27:29 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Jul-16 02:27:29 LOG5 begin_task: Level: (2) ID = <10095> Status = 0 0 0 0 ok 2009-Jul-16 02:27:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Jul-16 02:27:29 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Jul-16 02:27:29 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Jul-16 02:27:29 START begin_task: Starting task 'selecting calibration port' 2009-Jul-16 02:27:29 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2009-Jul-16 02:27:29 LOG3 vw_send: To DATATAKING: calport 3 2009-Jul-16 02:27:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Jul-16 02:27:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 02:27:29 START begin_task: Starting task 'waiting on calport' 2009-Jul-16 02:27:29 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2009-Jul-16 02:27:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:27:29 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Jul-16 02:27:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 02:27:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:27:29 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-16 02:27:29 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Jul-16 02:27:29 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2009-Jul-16 02:27:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Jul-16 02:27:29 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Jul-16 02:27:29 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2009-Jul-16 02:27:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jul-16 02:27:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jul-16 02:27:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-16 02:27:29 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2009-Jul-16 02:27:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:27:29 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-16 02:27:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-16 02:27:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-16 02:27:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-16 02:27:29 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2009-Jul-16 02:27:29 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Jul-16 02:27:29 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Jul-16 02:27:29 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Jul-16 02:27:29 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Jul-16 02:27:29 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Jul-16 02:27:29 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Jul-16 02:27:29 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Jul-16 02:27:29 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Jul-16 02:27:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2009-Jul-16 02:27:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2009-Jul-16 02:27:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2009-Jul-16 02:27:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2009-Jul-16 02:27:30 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Jul-16 02:27:30 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Jul-16 02:27:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-16 02:27:30 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2009-Jul-16 02:27:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Jul-16 02:27:30 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-16 02:27:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Jul-16 02:27:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-16 02:27:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2009-Jul-16 02:27:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-16 02:27:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-16 02:27:30 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2009-Jul-16 02:27:30 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Jul-16 02:27:30 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Jul-16 02:27:30 LOG5 finish_task: Level: (2) ID = <10095> Status = 0 0 0 0 ok 2009-Jul-16 02:27:30 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Jul-16 02:27:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-16 02:27:30 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Jul-16 02:27:30 LOG5 end_task: Level: (2) ID = <10095> Status = 0 0 0 0 ok 2009-Jul-16 02:27:30 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2009-Jul-16 02:27:30 COMMAND run_command_line: EXECUTING command 5: 'CATALOG AGESFull.cat' 2009-Jul-16 02:27:30 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2009-Jul-16 02:27:30 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGES7448_p1_001) < 215128 THEN' 2009-Jul-16 02:27:30 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p1_001) < 215128 2009-Jul-16 02:27:30 INFO5 is_if_valid: Condition parsed as: 21.63815 < 21.85777777777778 2009-Jul-16 02:27:30 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=268.98 alfaangle=-75.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_001 ra=225000.00 dec=175900.00' 2009-Jul-16 02:27:31 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-Jul-16 02:27:31 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Jul-16 02:27:31 WARNING check_obsmode: WARNING failed to get a response from the CIMA frontend when checking options for 'fixed azimuth drift map'! 2009-Jul-16 02:27:31 NOTE check_obsmode: Assuming that the options are OK 2009-Jul-16 02:27:31 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 268.98 -75.1 hcorcal 5 tracking no first 1 AGES7448_p1_001 225000.00 175900.00 J 8500.0 Heliocentric velocity(optical)' 2009-Jul-16 02:27:31 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Jul-16 02:27:31 LOG5 begin_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2009-Jul-16 02:27:31 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2009-Jul-16 02:27:31 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Jul-16 02:27:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p1_001} 2009-Jul-16 02:27:31 INFO3 fixed_driftmap: Sending telescope to Az = 268.98 and ZA = 7.88 2009-Jul-16 02:27:31 LOG3 track_source: Calling 'track_source AGES7448_p1_001 268.98 7.8792753901 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Jul-16 02:27:31 START begin_task: Starting task 'sending tracking commands' 2009-Jul-16 02:27:31 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2009-Jul-16 02:27:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_001} INFO {Slewing to source 'AGES7448_p1_001' ...} 2009-Jul-16 02:27:31 INFO1 track_source: Starting to track AGES7448_p1_001 2009-Jul-16 02:27:31 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_001" 2009-Jul-16 02:27:31 LOG3 vw_send: To DATATAKING: set ra 268.98 2009-Jul-16 02:27:31 LOG3 vw_send: To DATATAKING: set dec 7.8792753901 2009-Jul-16 02:27:31 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-16 02:27:31 LOG3 vw_send: To DATATAKING: pnt tr 268.98 7.8792753901 -CF 2009-Jul-16 02:27:31 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 02:27:31 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-16 02:27:31 LOG5 finish_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2009-Jul-16 02:27:31 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jul-16 02:27:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 02:27:31 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jul-16 02:27:31 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2009-Jul-16 02:27:31 START begin_task: Starting task 'rotate ALFA to -75.1 degrees' 2009-Jul-16 02:27:31 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2009-Jul-16 02:27:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -75.1 degrees ...} 2009-Jul-16 02:27:31 INFO2 rotate_alfa: ALFA commanded to -75.1 degrees 2009-Jul-16 02:27:31 LOG3 sock_errsend: To ALFAMOTOR: POSITION -75.1 REPLY 2009-Jul-16 02:27:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Jul-16 02:27:31 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Jul-16 02:27:31 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2009-Jul-16 02:27:31 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-16 02:27:31 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_001" 2009-Jul-16 02:27:31 LOG4 got_cormsg: From DATATAKING: set ra 268.98 2009-Jul-16 02:27:31 LOG4 got_cormsg: From DATATAKING: set dec 7.8792753901 2009-Jul-16 02:27:31 LOG4 got_cormsg: From DATATAKING: vw% 268.98 2009-Jul-16 02:27:31 LOG4 got_cormsg: From DATATAKING: vw% 7.8792753901 2009-Jul-16 02:27:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:27:31 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-16 02:27:31 LOG4 got_cormsg: From DATATAKING: pnt tr 268.98 7.8792753901 -CF 2009-Jul-16 02:27:32 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 02:27:32 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jul-16 02:27:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:28:25 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jul-16 02:28:25 INFO3 alfa_motor: ALFA rotator in-position -75.10 degrees 2009-Jul-16 02:28:25 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Jul-16 02:28:25 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2009-Jul-16 02:28:25 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jul-16 02:28:25 STOP finish_task: Finishing task 'rotate ALFA to -75.1 degrees' 2009-Jul-16 02:28:25 LOG5 finish_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2009-Jul-16 02:28:25 INFO2 finish_task: DONE finished configuration: rotating ALFA to -75.1 degrees 2009-Jul-16 02:28:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 02:28:25 STOP end_task: Finishing task 'rotate ALFA to -75.1 degrees' with status 'OK' 2009-Jul-16 02:28:25 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2009-Jul-16 02:28:25 START begin_task: Starting task 'waiting on telescope' 2009-Jul-16 02:28:25 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-Jul-16 02:28:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jul-16 02:28:25 LOG3 waittrk: Start waittrk 5 2009-Jul-16 02:28:25 START begin_task: Starting task 'waiting on telescope movement' 2009-Jul-16 02:28:25 LOG5 begin_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2009-Jul-16 02:28:30 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jul-16 02:28:30 LOG5 end_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2009-Jul-16 02:28:30 START begin_task: Starting task 'waiting on telescope on source' 2009-Jul-16 02:28:30 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2009-Jul-16 02:30:37 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jul-16 02:30:37 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2009-Jul-16 02:30:37 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jul-16 02:30:37 INFO2 waittrk: Now tracking AGES7448_p1_001 2009-Jul-16 02:30:37 LOG4 waittrk: Current telescope position: Az = 268.46 ZA = 7.87 2009-Jul-16 02:30:37 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jul-16 02:30:37 LOG5 finish_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-Jul-16 02:30:37 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Jul-16 02:30:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 02:30:37 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jul-16 02:30:37 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-Jul-16 02:30:37 START begin_task: Starting task 'selecting calibration type' 2009-Jul-16 02:30:37 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-Jul-16 02:30:37 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jul-16 02:30:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jul-16 02:30:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 02:30:37 START begin_task: Starting task 'waiting on setcal' 2009-Jul-16 02:30:37 LOG5 begin_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2009-Jul-16 02:30:37 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jul-16 02:30:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 02:30:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:30:37 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-16 02:30:37 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jul-16 02:30:37 LOG5 end_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2009-Jul-16 02:30:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jul-16 02:30:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 02:30:38 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jul-16 02:30:38 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 02:30:38 LOG5 begin_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2009-Jul-16 02:30:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:30:39 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 02:30:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 02:30:39 LOG5 end_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2009-Jul-16 02:30:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 02:30:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jul-16 02:30:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 02:30:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jul-16 02:30:39 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 02:30:39 LOG5 begin_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2009-Jul-16 02:30:39 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 02:30:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 02:30:39 LOG5 end_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2009-Jul-16 02:30:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 02:30:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jul-16 02:30:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jul-16 02:30:39 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-Jul-16 02:30:39 LOG5 dopset_later: Calling 'dopset_later 0' 2009-Jul-16 02:30:39 INFO3 dopset_later: Setting Doppler correction now 2009-Jul-16 02:30:39 LOG5 antvel: Calling 'antvel 268.980000 7.879275 F 0' 2009-Jul-16 02:30:39 LOG2 antvel: Transforming current Az = 268.98 ZA = 7.88 to apparent RA = 22:13:45.2 Dec = +18:18:51.0 2009-Jul-16 02:30:39 LOG2 antvel: Parameters to Doppler: Heliocentric 23438 2009 197 0.0 2009-Jul-16 02:30:39 INFO5 antvel: Computed antenna velocity: -19.62942 km/s 2009-Jul-16 02:30:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-19.629415977499999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-Jul-16 02:30:39 INFO4 dopset_gen: New sky frequencies: 1381.333874 1381.333874 1381.333874 1381.333874 1381.333874 1381.333874 1381.333874 1381.333874 1381.333874 2009-Jul-16 02:30:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.333874 sky0=1381.333874 sky1=1381.333874 sky2=1381.333874 sky3=1381.333874 sky4=1381.333874 sky5=1381.333874 sky6=1381.333874 sky7=1381.333874 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:30:39 LOG2 dopset_gen: Result from 'sky2syn': 1631.333874 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:30:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631333874.0} 2009-Jul-16 02:30:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:30:39 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-Jul-16 02:30:39 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-Jul-16 02:30:39 INFO5 fixed_driftmap: Tracking J2000 position: RA = 22:13:20.7 Dec = +18:16:00.1 2009-Jul-16 02:30:39 LOG3 track_source: Calling 'track_source AGES7448_p1_001 221320.7 181600.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Jul-16 02:30:39 START begin_task: Starting task 'sending tracking commands' 2009-Jul-16 02:30:39 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Jul-16 02:30:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_001} INFO {Slewing to source 'AGES7448_p1_001' ...} 2009-Jul-16 02:30:39 INFO1 track_source: Starting to track AGES7448_p1_001 2009-Jul-16 02:30:39 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_001" 2009-Jul-16 02:30:39 LOG3 vw_send: To DATATAKING: set ra 221320.7 2009-Jul-16 02:30:39 LOG3 vw_send: To DATATAKING: set dec 181600.1 2009-Jul-16 02:30:39 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-16 02:30:39 LOG3 vw_send: To DATATAKING: pnt tr 221320.7 181600.1 -CJ 2009-Jul-16 02:30:39 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 02:30:39 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-16 02:30:39 LOG5 finish_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Jul-16 02:30:39 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jul-16 02:30:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 02:30:39 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jul-16 02:30:39 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Jul-16 02:30:39 START begin_task: Starting task 'waiting on telescope' 2009-Jul-16 02:30:39 LOG5 begin_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2009-Jul-16 02:30:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jul-16 02:30:39 LOG3 waittrk: Start waittrk 5 2009-Jul-16 02:30:39 START begin_task: Starting task 'waiting on telescope movement' 2009-Jul-16 02:30:39 LOG5 begin_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2009-Jul-16 02:30:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631333874.0} 2009-Jul-16 02:30:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:30:39 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jul-16 02:30:39 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_001" 2009-Jul-16 02:30:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:30:39 LOG4 got_cormsg: From DATATAKING: set ra 221320.7 2009-Jul-16 02:30:39 LOG4 got_cormsg: From DATATAKING: set dec 181600.1 2009-Jul-16 02:30:39 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-16 02:30:39 LOG4 got_cormsg: From DATATAKING: pnt tr 221320.7 181600.1 -CJ 2009-Jul-16 02:30:39 LOG4 got_cormsg: From DATATAKING: 221320.7 2009-Jul-16 02:30:39 LOG4 got_cormsg: From DATATAKING: vw% 181600.1 2009-Jul-16 02:30:39 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2009-Jul-16 02:30:39 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 02:30:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:30:44 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jul-16 02:30:44 LOG5 end_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2009-Jul-16 02:30:44 START begin_task: Starting task 'waiting on telescope on source' 2009-Jul-16 02:30:44 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2009-Jul-16 02:30:47 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jul-16 02:30:47 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2009-Jul-16 02:30:47 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jul-16 02:30:47 INFO2 waittrk: Now tracking AGES7448_p1_001 2009-Jul-16 02:30:47 LOG4 waittrk: Current telescope position: Az = 268.45 ZA = 7.85 2009-Jul-16 02:30:47 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jul-16 02:30:47 LOG5 finish_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2009-Jul-16 02:30:47 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Jul-16 02:30:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 02:30:47 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jul-16 02:30:47 LOG5 end_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2009-Jul-16 02:30:47 START begin_task: Starting task 'adjusting WAPP power' 2009-Jul-16 02:30:47 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-Jul-16 02:30:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Jul-16 02:30:47 INFO2 adjust_power: Starting to adjust WAPP power 2009-Jul-16 02:30:47 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Jul-16 02:30:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Jul-16 02:30:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 02:30:47 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Jul-16 02:30:47 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2009-Jul-16 02:30:47 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Jul-16 02:30:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 02:30:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:30:51 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-16 02:30:51 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Jul-16 02:30:51 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2009-Jul-16 02:30:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Jul-16 02:30:51 START begin_task: Starting task 'adjusting WAPP power' 2009-Jul-16 02:30:51 LOG5 begin_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2009-Jul-16 02:30:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Jul-16 02:30:51 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-16 02:30:51 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-16 02:30:51 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-16 02:30:51 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-16 02:30:51 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Jul-16 02:30:51 LOG5 begin_task: Level: (5) ID = <10118> Status = 0 0 0 0 ok 2009-Jul-16 02:30:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:30:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Jul-16 02:30:51 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 3 1 dB --- beam 1: 3 3 dB 2009-Jul-16 02:30:51 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 2 0 dB --- beam 3: 0 0 dB 2009-Jul-16 02:30:51 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 0 dB --- beam 5: 0 0 dB 2009-Jul-16 02:30:51 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 0 0 dB --- beam 7: 0 0 dB 2009-Jul-16 02:30:51 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Jul-16 02:30:51 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Jul-16 02:30:51 LOG5 end_task: Level: (5) ID = <10118> Status = 0 0 0 0 ok 2009-Jul-16 02:30:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.110 1.062 ALFA beam 1: 0.893 0.897 2009-Jul-16 02:30:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.036 1.016 ALFA beam 3: 0.854 0.721 2009-Jul-16 02:30:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.649 0.408 ALFA beam 5: 1.101 0.994 2009-Jul-16 02:30:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.670 0.104 ALFA beam 7: 0.728 0.127 2009-Jul-16 02:30:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jul-16 02:30:51 LOG5 finish_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2009-Jul-16 02:30:51 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Jul-16 02:30:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 02:30:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jul-16 02:30:51 LOG5 end_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2009-Jul-16 02:30:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jul-16 02:30:52 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jul-16 02:30:52 LOG5 finish_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-Jul-16 02:30:52 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Jul-16 02:30:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 02:30:52 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jul-16 02:30:52 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-Jul-16 02:30:52 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2009-Jul-16 02:30:52 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2009-Jul-16 02:30:52 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2009-Jul-16 02:30:52 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2009-Jul-16 02:30:52 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-Jul-16 02:30:52 START begin_task: Starting task 'WAPP calibration' 2009-Jul-16 02:30:52 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-Jul-16 02:30:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Jul-16 02:30:52 START begin_task: Starting task 'selecting calibration type' 2009-Jul-16 02:30:52 LOG5 begin_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2009-Jul-16 02:30:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jul-16 02:30:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jul-16 02:30:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 02:30:52 START begin_task: Starting task 'waiting on setcal' 2009-Jul-16 02:30:52 LOG5 begin_task: Level: (5) ID = <10121> Status = 0 0 0 0 ok 2009-Jul-16 02:30:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2009-Jul-16 02:30:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jul-16 02:30:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 02:30:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:30:52 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-16 02:30:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jul-16 02:30:52 LOG5 end_task: Level: (5) ID = <10121> Status = 0 0 0 0 ok 2009-Jul-16 02:30:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jul-16 02:30:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 02:30:52 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jul-16 02:30:52 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 02:30:52 LOG5 begin_task: Level: (5) ID = <10122> Status = 0 0 0 0 ok 2009-Jul-16 02:30:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:30:52 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 02:30:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 02:30:52 LOG5 end_task: Level: (5) ID = <10122> Status = 0 0 0 0 ok 2009-Jul-16 02:30:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 02:30:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jul-16 02:30:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 02:30:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jul-16 02:30:52 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 02:30:52 LOG5 begin_task: Level: (5) ID = <10123> Status = 0 0 0 0 ok 2009-Jul-16 02:30:52 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 02:30:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 02:30:52 LOG5 end_task: Level: (5) ID = <10123> Status = 0 0 0 0 ok 2009-Jul-16 02:30:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 02:30:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jul-16 02:30:52 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jul-16 02:30:52 LOG5 end_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2009-Jul-16 02:30:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Jul-16 02:30:52 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jul-16 02:30:52 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jul-16 02:30:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-16 02:30:52 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2009-Jul-16 02:30:52 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-16 02:30:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jul-16 02:30:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20090716.a2048.0001.fits 2009-Jul-16 02:30:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-16 02:30:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-16 02:30:52 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2009-Jul-16 02:30:52 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-Jul-16 02:30:52 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-Jul-16 02:30:52 START begin_task: Starting task 'WAPP spectral observation' 2009-Jul-16 02:30:52 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2009-Jul-16 02:30:52 LOG5 log_alfabeam: Parameters: 22.222416666666668 18.266694444444447 21.679693 2009.5396434456359 -75.100082 2009-Jul-16 02:30:52 LOG4 log_alfabeam: ALFABEAM 0 22.222416666666671 18.266694444444447 2009-Jul-16 02:30:52 LOG4 log_alfabeam: ALFABEAM 1 22.224155851610490 18.177400139747046 2009-Jul-16 02:30:52 LOG4 log_alfabeam: ALFABEAM 2 22.229599872833091 18.239959731814007 2009-Jul-16 02:30:52 LOG4 log_alfabeam: ALFABEAM 3 22.227812964789432 18.329901225032483 2009-Jul-16 02:30:52 LOG4 log_alfabeam: ALFABEAM 4 22.220605117044389 18.355391136978124 2009-Jul-16 02:30:52 LOG4 log_alfabeam: ALFABEAM 5 22.215225142325437 18.292756460657486 2009-Jul-16 02:30:52 LOG4 log_alfabeam: ALFABEAM 6 22.216989407666585 18.204704459148957 2009-Jul-16 02:30:52 INFO2 take_data: Starting WAPP scan: 919700085 2009-Jul-16 02:30:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Jul-16 02:30:53 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jul-16 02:30:53 LOG5 begin_task: Level: (5) ID = <10126> Status = 0 0 0 0 ok 2009-Jul-16 02:30:53 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090716.a2048.0001.fits} 2009-Jul-16 02:30:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:30:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jul-16 02:30:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.110 1.062 0.893 0.897 2009-Jul-16 02:30:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.036 1.016 0.854 0.721 2009-Jul-16 02:30:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.649 0.408 1.101 0.994 2009-Jul-16 02:30:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.670 0.104 0.728 0.127 2009-Jul-16 02:30:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23454.00 2009-Jul-16 02:30:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.333874 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:30:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.333874 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:30:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.333874 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:30:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.333874 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:30:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.333874 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 2.001 (still bad) 2009-Jul-16 02:30:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.333874 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:30:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.333874 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:30:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.333874 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:30:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.333874 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:30:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:30:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jul-16 02:30:59 LOG5 end_task: Level: (5) ID = <10126> Status = 0 0 0 0 ok 2009-Jul-16 02:30:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jul-16 02:30:59 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2009-Jul-16 02:30:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Jul-16 02:30:59 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jul-16 02:30:59 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jul-16 02:30:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-16 02:30:59 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-Jul-16 02:30:59 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-16 02:30:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-16 02:30:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-16 02:30:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-16 02:30:59 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-Jul-16 02:30:59 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-Jul-16 02:30:59 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-Jul-16 02:30:59 START begin_task: Starting task 'WAPP spectral observation' 2009-Jul-16 02:30:59 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Jul-16 02:30:59 LOG5 log_alfabeam: Parameters: 22.222416666666668 18.266694444444447 21.681643 2009.5396436674525 -75.100082 2009-Jul-16 02:30:59 LOG4 log_alfabeam: ALFABEAM 0 22.222416666666671 18.266694444444443 2009-Jul-16 02:30:59 LOG4 log_alfabeam: ALFABEAM 1 22.224156116432063 18.177400636947421 2009-Jul-16 02:30:59 LOG4 log_alfabeam: ALFABEAM 2 22.229599979224933 18.239965041077006 2009-Jul-16 02:30:59 LOG4 log_alfabeam: ALFABEAM 3 22.227812622714143 18.329908288256316 2009-Jul-16 02:30:59 LOG4 log_alfabeam: ALFABEAM 4 22.220604600541524 18.355388437067834 2009-Jul-16 02:30:59 LOG4 log_alfabeam: ALFABEAM 5 22.215225017058817 18.292748939782665 2009-Jul-16 02:30:59 LOG4 log_alfabeam: ALFABEAM 6 22.216989618819554 18.204701871474764 2009-Jul-16 02:30:59 INFO2 take_data: Starting WAPP scan: 919700086 2009-Jul-16 02:31:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Jul-16 02:31:00 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jul-16 02:31:00 LOG5 begin_task: Level: (5) ID = <10129> Status = 0 0 0 0 ok 2009-Jul-16 02:31:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:31:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23461.00 2009-Jul-16 02:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 2.001 (still bad) 2009-Jul-16 02:31:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.333874 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:31:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.333874 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:31:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.333874 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:31:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.333874 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:31:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.333874 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:31:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.333874 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:31:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.333874 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:31:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.333874 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:31:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.333874 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:31:06 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-Jul-16 02:31:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:31:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jul-16 02:31:06 LOG5 end_task: Level: (5) ID = <10129> Status = 0 0 0 0 ok 2009-Jul-16 02:31:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jul-16 02:31:06 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Jul-16 02:31:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jul-16 02:31:06 STOP finish_task: Finishing task 'WAPP calibration' 2009-Jul-16 02:31:06 LOG5 finish_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-Jul-16 02:31:06 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Jul-16 02:31:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 02:31:06 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Jul-16 02:31:06 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-Jul-16 02:31:06 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-Jul-16 02:31:06 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 268.98 and ZA = 7.88 2009-Jul-16 02:31:06 LOG3 track_source: Calling 'track_source AGES7448_p1_001 268.98 7.8792753901 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Jul-16 02:31:06 START begin_task: Starting task 'sending tracking commands' 2009-Jul-16 02:31:06 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Jul-16 02:31:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_001} INFO {Slewing to source 'AGES7448_p1_001' ...} 2009-Jul-16 02:31:06 INFO1 track_source: Starting to track AGES7448_p1_001 2009-Jul-16 02:31:06 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_001" 2009-Jul-16 02:31:06 LOG3 vw_send: To DATATAKING: set ra 268.98 2009-Jul-16 02:31:06 LOG3 vw_send: To DATATAKING: set dec 7.8792753901 2009-Jul-16 02:31:06 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-16 02:31:06 LOG3 vw_send: To DATATAKING: pnt tr 268.98 7.8792753901 -CF 2009-Jul-16 02:31:06 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 02:31:06 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-16 02:31:06 LOG5 finish_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Jul-16 02:31:06 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jul-16 02:31:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 02:31:07 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jul-16 02:31:07 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Jul-16 02:31:07 LOG1 fixed_driftmap: Parameters: HA = +00:33:09.1 Start = 23:23:38.9 LST = 21:41:00.9 diff = 6157.9 secs 2009-Jul-16 02:31:07 WARNING fixed_driftmap: WARNING RA is more than 1 hour away --- starting anyway! 2009-Jul-16 02:31:07 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-Jul-16 02:31:07 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Jul-16 02:31:07 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-Jul-16 02:31:07 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Jul-16 02:31:07 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-Jul-16 02:31:07 START begin_task: Starting task 'WAPP spectral observation' 2009-Jul-16 02:31:07 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Jul-16 02:31:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jul-16 02:31:07 INFO2 take_data: Starting WAPP scan: 919700087 2009-Jul-16 02:31:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-Jul-16 02:31:07 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jul-16 02:31:07 LOG5 begin_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2009-Jul-16 02:31:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:31:07 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_001" 2009-Jul-16 02:31:07 LOG4 got_cormsg: From DATATAKING: set ra 268.98 2009-Jul-16 02:31:07 LOG4 got_cormsg: From DATATAKING: set dec 7.8792753901 2009-Jul-16 02:31:07 LOG4 got_cormsg: From DATATAKING: vw% 268.98 2009-Jul-16 02:31:07 LOG4 got_cormsg: From DATATAKING: vw% 7.8792753901 2009-Jul-16 02:31:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:31:07 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-16 02:31:07 LOG4 got_cormsg: From DATATAKING: pnt tr 268.98 7.8792753901 -CF 2009-Jul-16 02:31:07 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 02:31:07 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jul-16 02:31:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:31:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23468.00 2009-Jul-16 02:31:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.333874 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:31:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.333874 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:31:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.333874 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:31:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.333874 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:31:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.333874 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:31:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.333874 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:31:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.333874 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:31:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.333874 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:31:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.333874 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:31:11 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2009-Jul-16 02:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 02:31:19 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2009-Jul-16 02:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:31:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 02:31:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 1.059 0.892 0.897 2009-Jul-16 02:31:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.034 1.014 0.851 0.719 2009-Jul-16 02:31:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.647 0.405 1.100 0.990 2009-Jul-16 02:31:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.669 0.103 0.728 0.126 2009-Jul-16 02:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Jul-16 02:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 02:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 02:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 02:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 02:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 02:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 02:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 02:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:32:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 02:32:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.107 1.060 0.890 0.895 2009-Jul-16 02:32:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.037 1.015 0.852 0.717 2009-Jul-16 02:32:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.645 0.406 1.099 0.984 2009-Jul-16 02:32:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.668 0.103 0.728 0.126 2009-Jul-16 02:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 02:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 02:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 02:33:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 02:33:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 1.060 0.890 0.895 2009-Jul-16 02:33:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.036 1.013 0.849 0.715 2009-Jul-16 02:33:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.645 0.405 1.098 0.985 2009-Jul-16 02:33:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.669 0.103 0.727 0.126 2009-Jul-16 02:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 02:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 02:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:34:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 02:34:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.059 0.889 0.894 2009-Jul-16 02:34:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.036 1.013 0.849 0.714 2009-Jul-16 02:34:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.645 0.405 1.099 0.984 2009-Jul-16 02:34:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.668 0.103 0.725 0.126 2009-Jul-16 02:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 02:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:36:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 02:36:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.057 0.889 0.893 2009-Jul-16 02:36:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.035 1.012 0.847 0.713 2009-Jul-16 02:36:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.645 0.404 1.097 0.978 2009-Jul-16 02:36:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.669 0.103 0.727 0.126 2009-Jul-16 02:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:37:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 02:37:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.056 0.891 0.892 2009-Jul-16 02:37:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.036 1.013 0.848 0.713 2009-Jul-16 02:37:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.644 0.403 1.096 0.980 2009-Jul-16 02:37:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.667 0.103 0.725 0.126 2009-Jul-16 02:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:38:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 02:38:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.059 0.889 0.891 2009-Jul-16 02:38:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.035 1.012 0.847 0.711 2009-Jul-16 02:38:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.644 0.403 1.092 0.980 2009-Jul-16 02:38:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.103 0.726 0.125 2009-Jul-16 02:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Jul-16 02:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.099 (still bad) 2009-Jul-16 02:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Jul-16 02:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:39:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Jul-16 02:39:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 1.056 0.889 0.888 2009-Jul-16 02:39:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.036 1.012 0.845 0.710 2009-Jul-16 02:39:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.643 0.401 1.092 0.981 2009-Jul-16 02:39:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.102 0.725 0.125 2009-Jul-16 02:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.096 (still bad) 2009-Jul-16 02:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Jul-16 02:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Jul-16 02:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Jul-16 02:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:40:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 02:40:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.056 0.890 0.888 2009-Jul-16 02:40:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.033 1.012 0.846 0.710 2009-Jul-16 02:40:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.643 0.402 1.096 0.979 2009-Jul-16 02:40:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.103 0.724 0.125 2009-Jul-16 02:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Jul-16 02:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.098 (still bad) 2009-Jul-16 02:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:41:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 02:41:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.056 0.889 0.888 2009-Jul-16 02:41:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.034 1.012 0.847 0.710 2009-Jul-16 02:41:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.644 0.401 1.094 0.981 2009-Jul-16 02:41:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.103 0.724 0.125 2009-Jul-16 02:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:41:19 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 02:41:19.294 (seconds: 9679.294)!} 2009-Jul-16 02:41:19 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 02:41:19.294 (seconds: 9679.294)! 2009-Jul-16 02:41:20 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 9678.0 to 9679.0! 2009-Jul-16 02:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:41:21 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (9678.0 - 9680.0)! 2009-Jul-16 02:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Jul-16 02:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.096 (still bad) 2009-Jul-16 02:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Jul-16 02:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Jul-16 02:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:42:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 02:42:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.098 1.055 0.889 0.888 2009-Jul-16 02:42:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.035 1.012 0.846 0.709 2009-Jul-16 02:42:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.643 0.402 1.094 0.980 2009-Jul-16 02:42:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.103 0.724 0.125 2009-Jul-16 02:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Jul-16 02:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:43:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 02:43:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.098 1.058 0.890 0.888 2009-Jul-16 02:43:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.034 1.013 0.846 0.710 2009-Jul-16 02:43:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.643 0.402 1.092 0.977 2009-Jul-16 02:43:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.103 0.724 0.126 2009-Jul-16 02:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Jul-16 02:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Jul-16 02:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:44:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 02:44:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 1.056 0.890 0.888 2009-Jul-16 02:44:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.034 1.012 0.847 0.710 2009-Jul-16 02:44:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.643 0.402 1.092 0.976 2009-Jul-16 02:44:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.103 0.724 0.125 2009-Jul-16 02:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.100 (still bad) 2009-Jul-16 02:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:45:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 02:45:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.056 0.889 0.888 2009-Jul-16 02:45:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 1.012 0.846 0.710 2009-Jul-16 02:45:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.643 0.402 1.092 0.980 2009-Jul-16 02:45:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.667 0.103 0.725 0.125 2009-Jul-16 02:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:46:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 02:46:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.052 0.888 0.888 2009-Jul-16 02:46:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.036 1.012 0.847 0.711 2009-Jul-16 02:46:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.643 0.402 1.093 0.976 2009-Jul-16 02:46:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.103 0.724 0.126 2009-Jul-16 02:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 02:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:47:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 02:47:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.055 0.889 0.888 2009-Jul-16 02:47:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.034 1.013 0.848 0.711 2009-Jul-16 02:47:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.644 0.402 1.094 0.979 2009-Jul-16 02:47:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.665 0.103 0.724 0.126 2009-Jul-16 02:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:48:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 02:48:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.056 0.890 0.889 2009-Jul-16 02:48:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.036 1.013 0.847 0.710 2009-Jul-16 02:48:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.643 0.402 1.092 0.981 2009-Jul-16 02:48:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.103 0.724 0.126 2009-Jul-16 02:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 02:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:49:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 02:49:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.059 0.889 0.891 2009-Jul-16 02:49:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.036 1.014 0.847 0.710 2009-Jul-16 02:49:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.643 0.403 1.096 0.984 2009-Jul-16 02:49:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.103 0.724 0.126 2009-Jul-16 02:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 02:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:50:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 02:50:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.059 0.890 0.891 2009-Jul-16 02:50:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.034 1.014 0.848 0.711 2009-Jul-16 02:50:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.643 0.403 1.093 0.979 2009-Jul-16 02:50:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.103 0.725 0.126 2009-Jul-16 02:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 02:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 02:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 02:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 02:51:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:51:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jul-16 02:51:08 LOG5 end_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2009-Jul-16 02:51:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jul-16 02:51:08 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Jul-16 02:51:08 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Jul-16 02:51:08 LOG5 finish_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2009-Jul-16 02:51:08 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-Jul-16 02:51:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-16 02:51:08 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-Jul-16 02:51:08 LOG5 end_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2009-Jul-16 02:51:08 COMMAND run_command_line: EXECUTING command 12: 'ENDIF' 2009-Jul-16 02:51:08 COMMAND run_command_line: EXECUTING command 15: 'IF LSTSLEW(AGES7448_p1_003) < 221429 THEN' 2009-Jul-16 02:51:09 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p1_003) < 221429 2009-Jul-16 02:51:09 INFO5 is_if_valid: Condition parsed as: 22.045062666666666 < 22.241388888888888 2009-Jul-16 02:51:09 COMMAND run_command_line: EXECUTING command 16: 'FIXEDDRIFT az=271.06 alfaangle=-75.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_003 ra=225000.00 dec=175600.00' 2009-Jul-16 02:51:09 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-Jul-16 02:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 02:51:09 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-16 02:51:09 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 271.06 -75.4 hcorcal 5 tracking no first 1 AGES7448_p1_003 225000.00 175600.00 J 8500.0 Heliocentric velocity(optical)' 2009-Jul-16 02:51:09 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Jul-16 02:51:09 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2009-Jul-16 02:51:09 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES7448_p1_001' 2009-Jul-16 02:51:09 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Jul-16 02:51:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p1_003} 2009-Jul-16 02:51:09 INFO3 fixed_driftmap: Sending telescope to Az = 271.06 and ZA = 14.94 2009-Jul-16 02:51:09 LOG3 track_source: Calling 'track_source AGES7448_p1_003 271.06 14.9411105510 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Jul-16 02:51:09 START begin_task: Starting task 'sending tracking commands' 2009-Jul-16 02:51:09 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2009-Jul-16 02:51:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_003} INFO {Slewing to source 'AGES7448_p1_003' ...} 2009-Jul-16 02:51:09 INFO1 track_source: Starting to track AGES7448_p1_003 2009-Jul-16 02:51:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_003" 2009-Jul-16 02:51:09 LOG3 vw_send: To DATATAKING: set ra 271.06 2009-Jul-16 02:51:09 LOG3 vw_send: To DATATAKING: set dec 14.9411105510 2009-Jul-16 02:51:09 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-16 02:51:09 LOG3 vw_send: To DATATAKING: pnt tr 271.06 14.9411105510 -CF 2009-Jul-16 02:51:10 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 02:51:10 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-16 02:51:10 LOG5 finish_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2009-Jul-16 02:51:10 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jul-16 02:51:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 02:51:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jul-16 02:51:10 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2009-Jul-16 02:51:10 START begin_task: Starting task 'rotate ALFA to -75.4 degrees' 2009-Jul-16 02:51:10 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2009-Jul-16 02:51:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -75.4 degrees ...} 2009-Jul-16 02:51:10 INFO2 rotate_alfa: ALFA commanded to -75.4 degrees 2009-Jul-16 02:51:10 LOG3 sock_errsend: To ALFAMOTOR: POSITION -75.4 REPLY 2009-Jul-16 02:51:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Jul-16 02:51:10 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Jul-16 02:51:10 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2009-Jul-16 02:51:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_003" 2009-Jul-16 02:51:10 LOG4 got_cormsg: From DATATAKING: set ra 271.06 2009-Jul-16 02:51:10 LOG4 got_cormsg: From DATATAKING: set dec 14.9411105510 2009-Jul-16 02:51:10 LOG4 got_cormsg: From DATATAKING: vw% 271.06 2009-Jul-16 02:51:10 LOG4 got_cormsg: From DATATAKING: vw% 14.9411105510 2009-Jul-16 02:51:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:51:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-16 02:51:10 LOG4 got_cormsg: From DATATAKING: pnt tr 271.06 14.9411105510 -CF 2009-Jul-16 02:51:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 02:51:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jul-16 02:51:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:51:11 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jul-16 02:51:11 INFO3 alfa_motor: ALFA rotator in-position -75.40 degrees 2009-Jul-16 02:51:11 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Jul-16 02:51:11 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2009-Jul-16 02:51:11 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jul-16 02:51:11 STOP finish_task: Finishing task 'rotate ALFA to -75.4 degrees' 2009-Jul-16 02:51:11 LOG5 finish_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2009-Jul-16 02:51:11 INFO2 finish_task: DONE finished configuration: rotating ALFA to -75.4 degrees 2009-Jul-16 02:51:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 02:51:11 STOP end_task: Finishing task 'rotate ALFA to -75.4 degrees' with status 'OK' 2009-Jul-16 02:51:11 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2009-Jul-16 02:51:11 START begin_task: Starting task 'waiting on telescope' 2009-Jul-16 02:51:11 LOG5 begin_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2009-Jul-16 02:51:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jul-16 02:51:11 LOG3 waittrk: Start waittrk 5 2009-Jul-16 02:51:11 START begin_task: Starting task 'waiting on telescope movement' 2009-Jul-16 02:51:11 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2009-Jul-16 02:51:16 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jul-16 02:51:16 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2009-Jul-16 02:51:16 START begin_task: Starting task 'waiting on telescope on source' 2009-Jul-16 02:51:16 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2009-Jul-16 02:54:08 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jul-16 02:54:08 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2009-Jul-16 02:54:08 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jul-16 02:54:08 INFO2 waittrk: Now tracking AGES7448_p1_003 2009-Jul-16 02:54:08 LOG4 waittrk: Current telescope position: Az = 270.65 ZA = 14.95 2009-Jul-16 02:54:08 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jul-16 02:54:08 LOG5 finish_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2009-Jul-16 02:54:08 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Jul-16 02:54:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 02:54:08 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jul-16 02:54:08 LOG5 end_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2009-Jul-16 02:54:08 START begin_task: Starting task 'selecting calibration type' 2009-Jul-16 02:54:08 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2009-Jul-16 02:54:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jul-16 02:54:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jul-16 02:54:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 02:54:08 START begin_task: Starting task 'waiting on setcal' 2009-Jul-16 02:54:08 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2009-Jul-16 02:54:08 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jul-16 02:54:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 02:54:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:54:09 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-16 02:54:09 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jul-16 02:54:09 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2009-Jul-16 02:54:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jul-16 02:54:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 02:54:10 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jul-16 02:54:10 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 02:54:10 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2009-Jul-16 02:54:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:54:10 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 02:54:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 02:54:10 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2009-Jul-16 02:54:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 02:54:10 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jul-16 02:54:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 02:54:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jul-16 02:54:10 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 02:54:10 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2009-Jul-16 02:54:10 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 02:54:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 02:54:10 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2009-Jul-16 02:54:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 02:54:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jul-16 02:54:10 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jul-16 02:54:10 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2009-Jul-16 02:54:10 LOG5 dopset_later: Calling 'dopset_later 0' 2009-Jul-16 02:54:10 INFO3 dopset_later: Setting Doppler correction now 2009-Jul-16 02:54:10 LOG5 antvel: Calling 'antvel 271.060000 14.941111 F 0' 2009-Jul-16 02:54:10 LOG2 antvel: Transforming current Az = 271.06 ZA = 14.94 to apparent RA = 23:06:50.0 Dec = +17:26:24.9 2009-Jul-16 02:54:10 LOG2 antvel: Parameters to Doppler: Heliocentric 24849 2009 197 0.0 2009-Jul-16 02:54:10 INFO5 antvel: Computed antenna velocity: -23.97959 km/s 2009-Jul-16 02:54:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-23.979585979100001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-Jul-16 02:54:10 INFO4 dopset_gen: New sky frequencies: 1381.353919 1381.353919 1381.353919 1381.353919 1381.353919 1381.353919 1381.353919 1381.353919 1381.353919 2009-Jul-16 02:54:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.353919 sky0=1381.353919 sky1=1381.353919 sky2=1381.353919 sky3=1381.353919 sky4=1381.353919 sky5=1381.353919 sky6=1381.353919 sky7=1381.353919 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 02:54:10 LOG2 dopset_gen: Result from 'sky2syn': 1631.353919 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 02:54:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631353919.0} 2009-Jul-16 02:54:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:54:10 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-Jul-16 02:54:10 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-Jul-16 02:54:10 INFO5 fixed_driftmap: Tracking J2000 position: RA = 23:06:24.6 Dec = +17:23:18.9 2009-Jul-16 02:54:10 LOG3 track_source: Calling 'track_source AGES7448_p1_003 230624.6 172318.9 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Jul-16 02:54:10 START begin_task: Starting task 'sending tracking commands' 2009-Jul-16 02:54:10 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2009-Jul-16 02:54:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_003} INFO {Slewing to source 'AGES7448_p1_003' ...} 2009-Jul-16 02:54:10 INFO1 track_source: Starting to track AGES7448_p1_003 2009-Jul-16 02:54:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_003" 2009-Jul-16 02:54:10 LOG3 vw_send: To DATATAKING: set ra 230624.6 2009-Jul-16 02:54:10 LOG3 vw_send: To DATATAKING: set dec 172318.9 2009-Jul-16 02:54:10 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-16 02:54:10 LOG3 vw_send: To DATATAKING: pnt tr 230624.6 172318.9 -CJ 2009-Jul-16 02:54:10 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 02:54:10 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-16 02:54:10 LOG5 finish_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2009-Jul-16 02:54:10 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jul-16 02:54:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 02:54:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jul-16 02:54:10 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2009-Jul-16 02:54:10 START begin_task: Starting task 'waiting on telescope' 2009-Jul-16 02:54:10 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2009-Jul-16 02:54:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jul-16 02:54:10 LOG3 waittrk: Start waittrk 5 2009-Jul-16 02:54:10 START begin_task: Starting task 'waiting on telescope movement' 2009-Jul-16 02:54:10 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2009-Jul-16 02:54:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631353919.0} 2009-Jul-16 02:54:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 02:54:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:54:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_003" 2009-Jul-16 02:54:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:54:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:54:10 LOG4 got_cormsg: From DATATAKING: set ra 230624.6 2009-Jul-16 02:54:10 LOG4 got_cormsg: From DATATAKING: set dec 172318.9 2009-Jul-16 02:54:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-16 02:54:10 LOG4 got_cormsg: From DATATAKING: pnt tr 230624.6 172318.9 -CJ 2009-Jul-16 02:54:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 02:54:10 LOG4 got_cormsg: From DATATAKING: 230624.6 2009-Jul-16 02:54:10 LOG4 got_cormsg: From DATATAKING: vw% 172318.9 2009-Jul-16 02:54:10 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2009-Jul-16 02:54:15 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jul-16 02:54:15 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2009-Jul-16 02:54:15 START begin_task: Starting task 'waiting on telescope on source' 2009-Jul-16 02:54:15 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2009-Jul-16 02:54:17 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jul-16 02:54:17 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2009-Jul-16 02:54:17 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jul-16 02:54:17 INFO2 waittrk: Now tracking AGES7448_p1_003 2009-Jul-16 02:54:17 LOG4 waittrk: Current telescope position: Az = 270.65 ZA = 14.93 2009-Jul-16 02:54:17 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jul-16 02:54:17 LOG5 finish_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2009-Jul-16 02:54:17 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Jul-16 02:54:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 02:54:17 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jul-16 02:54:17 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2009-Jul-16 02:54:17 START begin_task: Starting task 'adjusting WAPP power' 2009-Jul-16 02:54:17 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2009-Jul-16 02:54:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Jul-16 02:54:18 INFO2 adjust_power: Starting to adjust WAPP power 2009-Jul-16 02:54:18 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Jul-16 02:54:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Jul-16 02:54:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 02:54:18 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Jul-16 02:54:18 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2009-Jul-16 02:54:18 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Jul-16 02:54:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 02:54:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:54:21 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-16 02:54:21 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Jul-16 02:54:21 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2009-Jul-16 02:54:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Jul-16 02:54:21 START begin_task: Starting task 'adjusting WAPP power' 2009-Jul-16 02:54:21 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2009-Jul-16 02:54:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Jul-16 02:54:21 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-16 02:54:21 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-16 02:54:21 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-16 02:54:21 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-16 02:54:21 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Jul-16 02:54:21 LOG5 begin_task: Level: (5) ID = <10151> Status = 0 0 0 0 ok 2009-Jul-16 02:54:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Jul-16 02:54:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:54:21 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 3 1 dB --- beam 1: 3 3 dB 2009-Jul-16 02:54:21 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 2 0 dB --- beam 3: 0 0 dB 2009-Jul-16 02:54:21 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 0 dB --- beam 5: 0 0 dB 2009-Jul-16 02:54:21 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 0 0 dB --- beam 7: 0 0 dB 2009-Jul-16 02:54:21 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Jul-16 02:54:21 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Jul-16 02:54:21 LOG5 end_task: Level: (5) ID = <10151> Status = 0 0 0 0 ok 2009-Jul-16 02:54:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.103 1.059 ALFA beam 1: 0.895 0.893 2009-Jul-16 02:54:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.036 1.013 ALFA beam 3: 0.849 0.713 2009-Jul-16 02:54:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.644 0.404 ALFA beam 5: 1.098 0.987 2009-Jul-16 02:54:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.669 0.103 ALFA beam 7: 0.726 0.126 2009-Jul-16 02:54:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jul-16 02:54:22 LOG5 finish_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2009-Jul-16 02:54:22 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Jul-16 02:54:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 02:54:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jul-16 02:54:22 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2009-Jul-16 02:54:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jul-16 02:54:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jul-16 02:54:22 LOG5 finish_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2009-Jul-16 02:54:22 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Jul-16 02:54:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 02:54:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jul-16 02:54:22 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2009-Jul-16 02:54:22 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2009-Jul-16 02:54:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2009-Jul-16 02:54:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2009-Jul-16 02:54:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2009-Jul-16 02:54:22 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-Jul-16 02:54:22 START begin_task: Starting task 'WAPP calibration' 2009-Jul-16 02:54:22 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2009-Jul-16 02:54:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Jul-16 02:54:22 START begin_task: Starting task 'selecting calibration type' 2009-Jul-16 02:54:22 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2009-Jul-16 02:54:22 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jul-16 02:54:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jul-16 02:54:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 02:54:22 START begin_task: Starting task 'waiting on setcal' 2009-Jul-16 02:54:22 LOG5 begin_task: Level: (5) ID = <10154> Status = 0 0 0 0 ok 2009-Jul-16 02:54:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2009-Jul-16 02:54:22 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jul-16 02:54:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 02:54:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:54:22 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-16 02:54:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jul-16 02:54:22 LOG5 end_task: Level: (5) ID = <10154> Status = 0 0 0 0 ok 2009-Jul-16 02:54:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jul-16 02:54:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 02:54:22 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jul-16 02:54:22 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 02:54:22 LOG5 begin_task: Level: (5) ID = <10155> Status = 0 0 0 0 ok 2009-Jul-16 02:54:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:54:22 NOTE WAPPDATA-new_file: New FITS file: wapp.20090716.a2048.0002.fits 2009-Jul-16 02:54:22 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 02:54:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 02:54:22 LOG5 end_task: Level: (5) ID = <10155> Status = 0 0 0 0 ok 2009-Jul-16 02:54:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 02:54:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jul-16 02:54:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 02:54:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jul-16 02:54:22 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 02:54:22 LOG5 begin_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2009-Jul-16 02:54:22 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090716.a2048.0002.fits} 2009-Jul-16 02:54:23 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 02:54:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 02:54:23 LOG5 end_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2009-Jul-16 02:54:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 02:54:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jul-16 02:54:23 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jul-16 02:54:23 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2009-Jul-16 02:54:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Jul-16 02:54:23 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jul-16 02:54:23 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jul-16 02:54:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-16 02:54:23 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2009-Jul-16 02:54:23 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-16 02:54:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jul-16 02:54:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-16 02:54:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-16 02:54:23 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2009-Jul-16 02:54:23 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-Jul-16 02:54:23 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-Jul-16 02:54:23 START begin_task: Starting task 'WAPP spectral observation' 2009-Jul-16 02:54:23 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2009-Jul-16 02:54:23 LOG5 log_alfabeam: Parameters: 23.106833333333338 17.38858333333333 22.072432 2009.5396881258398 -75.400078 2009-Jul-16 02:54:23 LOG4 log_alfabeam: ALFABEAM 0 23.106833333333331 17.388583333333326 2009-Jul-16 02:54:23 LOG4 log_alfabeam: ALFABEAM 1 23.108147061942091 17.297870844854113 2009-Jul-16 02:54:23 LOG4 log_alfabeam: ALFABEAM 2 23.113836331666299 17.354837349996384 2009-Jul-16 02:54:23 LOG4 log_alfabeam: ALFABEAM 3 23.112501061672599 17.445907772539506 2009-Jul-16 02:54:23 LOG4 log_alfabeam: ALFABEAM 4 23.105480532539023 17.479020670912078 2009-Jul-16 02:54:23 LOG4 log_alfabeam: ALFABEAM 5 23.099823096636811 17.421967611562451 2009-Jul-16 02:54:23 LOG4 log_alfabeam: ALFABEAM 6 23.101154443628808 17.331887518962855 2009-Jul-16 02:54:23 INFO2 take_data: Starting WAPP scan: 919700088 2009-Jul-16 02:54:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Jul-16 02:54:23 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jul-16 02:54:23 LOG5 begin_task: Level: (5) ID = <10159> Status = 0 0 0 0 ok 2009-Jul-16 02:54:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:54:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24864.00 2009-Jul-16 02:54:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 02:54:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.059 0.895 0.893 2009-Jul-16 02:54:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.036 1.013 0.849 0.713 2009-Jul-16 02:54:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.644 0.404 1.098 0.987 2009-Jul-16 02:54:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.669 0.103 0.726 0.126 2009-Jul-16 02:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.353919 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.353919 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.353919 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.353919 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.353919 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.353919 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.353919 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.353919 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.353919 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:54:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:54:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jul-16 02:54:29 LOG5 end_task: Level: (5) ID = <10159> Status = 0 0 0 0 ok 2009-Jul-16 02:54:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jul-16 02:54:29 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2009-Jul-16 02:54:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Jul-16 02:54:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jul-16 02:54:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jul-16 02:54:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-16 02:54:29 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2009-Jul-16 02:54:29 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-16 02:54:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-16 02:54:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-16 02:54:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-16 02:54:29 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2009-Jul-16 02:54:29 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-Jul-16 02:54:29 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-Jul-16 02:54:29 START begin_task: Starting task 'WAPP spectral observation' 2009-Jul-16 02:54:29 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2009-Jul-16 02:54:29 LOG5 log_alfabeam: Parameters: 23.106833333333338 17.38858333333333 22.074382 2009.5396883476562 -75.400078 2009-Jul-16 02:54:29 LOG4 log_alfabeam: ALFABEAM 0 23.106833333333334 17.388583333333319 2009-Jul-16 02:54:29 LOG4 log_alfabeam: ALFABEAM 1 23.108146799497604 17.297869910909530 2009-Jul-16 02:54:29 LOG4 log_alfabeam: ALFABEAM 2 23.113836243086745 17.354833482111570 2009-Jul-16 02:54:29 LOG4 log_alfabeam: ALFABEAM 3 23.112501189701049 17.445905533064391 2009-Jul-16 02:54:29 LOG4 log_alfabeam: ALFABEAM 4 23.105480720786311 17.479021091325240 2009-Jul-16 02:54:29 LOG4 log_alfabeam: ALFABEAM 5 23.099823175093551 17.421970884106376 2009-Jul-16 02:54:29 LOG4 log_alfabeam: ALFABEAM 6 23.101154288462087 17.331891062247042 2009-Jul-16 02:54:29 INFO2 take_data: Starting WAPP scan: 919700089 2009-Jul-16 02:54:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Jul-16 02:54:30 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jul-16 02:54:30 LOG5 begin_task: Level: (5) ID = <10162> Status = 0 0 0 0 ok 2009-Jul-16 02:54:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.987 (still bad) 2009-Jul-16 02:54:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24871.00 2009-Jul-16 02:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.353919 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.353919 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.353919 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.353919 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.353919 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.353919 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.353919 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.353919 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.353919 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:54:36 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-Jul-16 02:54:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 02:54:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jul-16 02:54:36 LOG5 end_task: Level: (5) ID = <10162> Status = 0 0 0 0 ok 2009-Jul-16 02:54:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jul-16 02:54:36 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2009-Jul-16 02:54:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jul-16 02:54:36 STOP finish_task: Finishing task 'WAPP calibration' 2009-Jul-16 02:54:36 LOG5 finish_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2009-Jul-16 02:54:36 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Jul-16 02:54:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 02:54:36 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Jul-16 02:54:36 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2009-Jul-16 02:54:37 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-Jul-16 02:54:37 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 271.06 and ZA = 14.94 2009-Jul-16 02:54:37 LOG3 track_source: Calling 'track_source AGES7448_p1_003 271.06 14.9411105510 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Jul-16 02:54:37 START begin_task: Starting task 'sending tracking commands' 2009-Jul-16 02:54:37 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2009-Jul-16 02:54:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_003} INFO {Slewing to source 'AGES7448_p1_003' ...} 2009-Jul-16 02:54:37 INFO1 track_source: Starting to track AGES7448_p1_003 2009-Jul-16 02:54:37 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_003" 2009-Jul-16 02:54:37 LOG3 vw_send: To DATATAKING: set ra 271.06 2009-Jul-16 02:54:37 LOG3 vw_send: To DATATAKING: set dec 14.9411105510 2009-Jul-16 02:54:37 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-16 02:54:37 LOG3 vw_send: To DATATAKING: pnt tr 271.06 14.9411105510 -CF 2009-Jul-16 02:54:37 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 02:54:37 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-16 02:54:37 LOG5 finish_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2009-Jul-16 02:54:37 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jul-16 02:54:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 02:54:37 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jul-16 02:54:37 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2009-Jul-16 02:54:37 LOG1 fixed_driftmap: Parameters: HA = +01:02:54.1 Start = 23:53:23.9 LST = 22:04:34.8 diff = 6529.1 secs 2009-Jul-16 02:54:37 WARNING fixed_driftmap: WARNING RA is more than 1 hour away --- starting anyway! 2009-Jul-16 02:54:37 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-Jul-16 02:54:37 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Jul-16 02:54:37 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-Jul-16 02:54:37 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Jul-16 02:54:37 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-Jul-16 02:54:37 START begin_task: Starting task 'WAPP spectral observation' 2009-Jul-16 02:54:37 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2009-Jul-16 02:54:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jul-16 02:54:37 INFO2 take_data: Starting WAPP scan: 919700090 2009-Jul-16 02:54:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-Jul-16 02:54:37 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jul-16 02:54:37 LOG5 begin_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2009-Jul-16 02:54:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 02:54:37 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_003" 2009-Jul-16 02:54:37 LOG4 got_cormsg: From DATATAKING: set ra 271.06 2009-Jul-16 02:54:37 LOG4 got_cormsg: From DATATAKING: set dec 14.9411105510 2009-Jul-16 02:54:37 LOG4 got_cormsg: From DATATAKING: vw% 271.06 2009-Jul-16 02:54:37 LOG4 got_cormsg: From DATATAKING: vw% 14.9411105510 2009-Jul-16 02:54:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:54:37 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-16 02:54:37 LOG4 got_cormsg: From DATATAKING: pnt tr 271.06 14.9411105510 -CF 2009-Jul-16 02:54:37 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 02:54:37 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jul-16 02:54:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 02:54:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24878.00 2009-Jul-16 02:54:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.353919 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 02:54:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.353919 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:54:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.353919 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:54:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.353919 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 02:54:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.353919 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 02:54:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.353919 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:54:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.353919 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:54:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.353919 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:54:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.353919 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 02:54:41 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2009-Jul-16 02:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 02:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 02:54:49 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2009-Jul-16 02:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 02:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 02:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:55:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 02:55:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.108 1.060 0.897 0.894 2009-Jul-16 02:55:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.039 1.014 0.849 0.713 2009-Jul-16 02:55:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.646 0.404 1.099 0.988 2009-Jul-16 02:55:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.667 0.103 0.724 0.126 2009-Jul-16 02:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:56:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 02:56:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.107 1.061 0.896 0.896 2009-Jul-16 02:56:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.036 1.014 0.849 0.714 2009-Jul-16 02:56:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.646 0.403 1.096 0.988 2009-Jul-16 02:56:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.667 0.103 0.724 0.126 2009-Jul-16 02:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 02:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jul-16 02:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 02:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 02:57:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 02:57:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.108 1.060 0.896 0.895 2009-Jul-16 02:57:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.037 1.014 0.850 0.714 2009-Jul-16 02:57:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.646 0.403 1.094 0.991 2009-Jul-16 02:57:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.667 0.103 0.724 0.126 2009-Jul-16 02:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jul-16 02:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jul-16 02:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Jul-16 02:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Jul-16 02:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jul-16 02:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Jul-16 02:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jul-16 02:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Jul-16 02:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Jul-16 02:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Jul-16 02:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jul-16 02:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jul-16 02:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jul-16 02:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 02:58:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 02:58:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.108 1.063 0.896 0.894 2009-Jul-16 02:58:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.037 1.012 0.850 0.716 2009-Jul-16 02:58:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.646 0.402 1.096 0.991 2009-Jul-16 02:58:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.103 0.724 0.126 2009-Jul-16 02:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jul-16 02:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jul-16 02:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jul-16 02:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jul-16 02:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Jul-16 02:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jul-16 02:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 02:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Jul-16 02:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jul-16 02:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jul-16 02:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 02:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Jul-16 02:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Jul-16 02:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 02:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Jul-16 02:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Jul-16 02:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 02:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Jul-16 02:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 02:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Jul-16 02:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 02:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 02:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 02:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 02:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 02:59:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jul-16 02:59:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.111 1.062 0.897 0.895 2009-Jul-16 02:59:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 1.014 0.851 0.718 2009-Jul-16 02:59:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.646 0.403 1.100 0.993 2009-Jul-16 02:59:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.667 0.104 0.724 0.126 2009-Jul-16 02:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 02:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 02:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jul-16 02:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 02:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 02:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 02:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 02:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 02:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 02:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 02:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 02:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 02:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 03:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 03:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 03:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:00:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jul-16 03:00:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.111 1.063 0.897 0.895 2009-Jul-16 03:00:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.039 1.014 0.850 0.721 2009-Jul-16 03:00:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.646 0.403 1.100 0.993 2009-Jul-16 03:00:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.667 0.104 0.725 0.126 2009-Jul-16 03:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 03:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:01:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jul-16 03:01:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.111 1.063 0.897 0.896 2009-Jul-16 03:01:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 1.014 0.851 0.723 2009-Jul-16 03:01:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.647 0.403 1.099 0.994 2009-Jul-16 03:01:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.667 0.104 0.725 0.126 2009-Jul-16 03:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jul-16 03:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Jul-16 03:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:02:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jul-16 03:02:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.112 1.067 0.896 0.896 2009-Jul-16 03:02:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 1.013 0.850 0.722 2009-Jul-16 03:02:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.646 0.403 1.098 0.994 2009-Jul-16 03:02:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.104 0.726 0.127 2009-Jul-16 03:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jul-16 03:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jul-16 03:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.115 (still bad) 2009-Jul-16 03:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.113 (still bad) 2009-Jul-16 03:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.113 (still bad) 2009-Jul-16 03:03:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jul-16 03:03:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.113 1.065 0.896 0.897 2009-Jul-16 03:03:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.039 1.013 0.850 0.722 2009-Jul-16 03:03:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.645 0.403 1.099 0.995 2009-Jul-16 03:03:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.104 0.725 0.126 2009-Jul-16 03:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Jul-16 03:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 03:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 03:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:04:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jul-16 03:04:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.111 1.066 0.896 0.898 2009-Jul-16 03:04:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 1.013 0.852 0.721 2009-Jul-16 03:04:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.646 0.403 1.097 0.996 2009-Jul-16 03:04:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.667 0.104 0.725 0.126 2009-Jul-16 03:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 03:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 03:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 03:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 03:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 03:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Jul-16 03:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Jul-16 03:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.113 (still bad) 2009-Jul-16 03:05:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jul-16 03:05:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.113 1.065 0.897 0.897 2009-Jul-16 03:05:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 1.014 0.852 0.721 2009-Jul-16 03:05:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.647 0.402 1.101 0.996 2009-Jul-16 03:05:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.104 0.725 0.127 2009-Jul-16 03:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jul-16 03:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jul-16 03:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jul-16 03:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jul-16 03:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jul-16 03:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jul-16 03:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jul-16 03:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jul-16 03:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jul-16 03:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jul-16 03:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jul-16 03:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Jul-16 03:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jul-16 03:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Jul-16 03:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Jul-16 03:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:06:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Jul-16 03:06:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.113 1.065 0.896 0.898 2009-Jul-16 03:06:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 1.013 0.849 0.720 2009-Jul-16 03:06:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.646 0.405 1.103 0.996 2009-Jul-16 03:06:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.104 0.725 0.126 2009-Jul-16 03:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Jul-16 03:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Jul-16 03:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Jul-16 03:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Jul-16 03:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 03:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 03:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 03:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Jul-16 03:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Jul-16 03:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jul-16 03:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 03:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 03:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 03:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 03:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:07:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:07:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.107 1.061 0.896 0.894 2009-Jul-16 03:07:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 1.014 0.849 0.716 2009-Jul-16 03:07:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.645 0.403 1.097 0.993 2009-Jul-16 03:07:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.103 0.724 0.126 2009-Jul-16 03:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:08:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:08:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 1.062 0.894 0.893 2009-Jul-16 03:08:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.037 1.011 0.848 0.713 2009-Jul-16 03:08:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.644 0.403 1.094 0.988 2009-Jul-16 03:08:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.665 0.103 0.723 0.126 2009-Jul-16 03:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:09:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:09:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.060 0.892 0.895 2009-Jul-16 03:09:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.039 1.009 0.847 0.713 2009-Jul-16 03:09:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.643 0.402 1.094 0.985 2009-Jul-16 03:09:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.664 0.103 0.722 0.125 2009-Jul-16 03:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:10:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:10:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.063 0.893 0.892 2009-Jul-16 03:10:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.038 1.011 0.848 0.711 2009-Jul-16 03:10:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.644 0.402 1.095 0.984 2009-Jul-16 03:10:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.663 0.103 0.722 0.126 2009-Jul-16 03:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:11:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:11:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.062 0.892 0.892 2009-Jul-16 03:11:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.039 1.010 0.849 0.711 2009-Jul-16 03:11:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.643 0.400 1.096 0.986 2009-Jul-16 03:11:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.664 0.103 0.723 0.125 2009-Jul-16 03:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 03:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 03:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 03:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:12:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:12:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.060 0.893 0.890 2009-Jul-16 03:12:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 1.011 0.847 0.712 2009-Jul-16 03:12:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.643 0.401 1.092 0.984 2009-Jul-16 03:12:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.664 0.103 0.722 0.125 2009-Jul-16 03:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Jul-16 03:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Jul-16 03:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:13:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:13:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.060 0.893 0.891 2009-Jul-16 03:13:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.039 1.012 0.847 0.712 2009-Jul-16 03:13:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.643 0.400 1.094 0.982 2009-Jul-16 03:13:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.665 0.103 0.723 0.125 2009-Jul-16 03:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Jul-16 03:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:14:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 03:14:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jul-16 03:14:38 LOG5 end_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2009-Jul-16 03:14:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jul-16 03:14:38 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2009-Jul-16 03:14:38 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Jul-16 03:14:38 LOG5 finish_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2009-Jul-16 03:14:38 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-Jul-16 03:14:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-16 03:14:38 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-Jul-16 03:14:38 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2009-Jul-16 03:14:38 COMMAND run_command_line: EXECUTING command 19: 'ENDIF' 2009-Jul-16 03:14:38 COMMAND run_command_line: EXECUTING command 22: 'IF LSTSLEW(AGES7448_p1_005) < 223729 THEN' 2009-Jul-16 03:14:39 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p1_005) < 223729 2009-Jul-16 03:14:39 INFO5 is_if_valid: Condition parsed as: 22.472801666666669 < 22.624722222222221 2009-Jul-16 03:14:39 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=277.22 alfaangle=-80.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_005 ra=225000.00 dec=175300.00' 2009-Jul-16 03:14:39 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-Jul-16 03:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:14:39 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-16 03:14:39 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 277.22 -80.5 hcorcal 5 tracking no first 1 AGES7448_p1_005 225000.00 175300.00 J 8500.0 Heliocentric velocity(optical)' 2009-Jul-16 03:14:39 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Jul-16 03:14:39 LOG5 begin_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2009-Jul-16 03:14:39 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES7448_p1_003' 2009-Jul-16 03:14:39 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Jul-16 03:14:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p1_005} 2009-Jul-16 03:14:39 INFO3 fixed_driftmap: Sending telescope to Az = 277.22 and ZA = 3.12 2009-Jul-16 03:14:39 LOG3 track_source: Calling 'track_source AGES7448_p1_005 277.22 3.1156596334 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Jul-16 03:14:39 START begin_task: Starting task 'sending tracking commands' 2009-Jul-16 03:14:39 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-Jul-16 03:14:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_005} INFO {Slewing to source 'AGES7448_p1_005' ...} 2009-Jul-16 03:14:39 INFO1 track_source: Starting to track AGES7448_p1_005 2009-Jul-16 03:14:39 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_005" 2009-Jul-16 03:14:39 LOG3 vw_send: To DATATAKING: set ra 277.22 2009-Jul-16 03:14:39 LOG3 vw_send: To DATATAKING: set dec 3.1156596334 2009-Jul-16 03:14:39 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-16 03:14:40 LOG3 vw_send: To DATATAKING: pnt tr 277.22 3.1156596334 -CF 2009-Jul-16 03:14:40 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 03:14:40 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-16 03:14:40 LOG5 finish_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-Jul-16 03:14:40 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jul-16 03:14:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 03:14:40 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jul-16 03:14:40 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-Jul-16 03:14:40 START begin_task: Starting task 'rotate ALFA to -80.5 degrees' 2009-Jul-16 03:14:40 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2009-Jul-16 03:14:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -80.5 degrees ...} 2009-Jul-16 03:14:40 INFO2 rotate_alfa: ALFA commanded to -80.5 degrees 2009-Jul-16 03:14:40 LOG3 sock_errsend: To ALFAMOTOR: POSITION -80.5 REPLY 2009-Jul-16 03:14:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Jul-16 03:14:40 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Jul-16 03:14:40 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2009-Jul-16 03:14:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_005" 2009-Jul-16 03:14:40 LOG4 got_cormsg: From DATATAKING: set ra 277.22 2009-Jul-16 03:14:40 LOG4 got_cormsg: From DATATAKING: set dec 3.1156596334 2009-Jul-16 03:14:40 LOG4 got_cormsg: From DATATAKING: vw% 277.22 2009-Jul-16 03:14:40 LOG4 got_cormsg: From DATATAKING: vw% 3.1156596334 2009-Jul-16 03:14:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 03:14:40 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-16 03:14:40 LOG4 got_cormsg: From DATATAKING: pnt tr 277.22 3.1156596334 -CF 2009-Jul-16 03:14:40 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 03:14:40 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jul-16 03:14:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 03:14:44 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jul-16 03:14:44 INFO3 alfa_motor: ALFA rotator in-position -80.50 degrees 2009-Jul-16 03:14:44 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Jul-16 03:14:44 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2009-Jul-16 03:14:44 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jul-16 03:14:44 STOP finish_task: Finishing task 'rotate ALFA to -80.5 degrees' 2009-Jul-16 03:14:44 LOG5 finish_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2009-Jul-16 03:14:44 INFO2 finish_task: DONE finished configuration: rotating ALFA to -80.5 degrees 2009-Jul-16 03:14:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 03:14:44 STOP end_task: Finishing task 'rotate ALFA to -80.5 degrees' with status 'OK' 2009-Jul-16 03:14:44 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2009-Jul-16 03:14:44 START begin_task: Starting task 'waiting on telescope' 2009-Jul-16 03:14:44 LOG5 begin_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2009-Jul-16 03:14:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jul-16 03:14:44 LOG3 waittrk: Start waittrk 5 2009-Jul-16 03:14:44 START begin_task: Starting task 'waiting on telescope movement' 2009-Jul-16 03:14:44 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2009-Jul-16 03:14:49 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jul-16 03:14:49 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2009-Jul-16 03:14:49 START begin_task: Starting task 'waiting on telescope on source' 2009-Jul-16 03:14:49 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2009-Jul-16 03:19:34 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jul-16 03:19:34 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2009-Jul-16 03:19:34 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jul-16 03:19:34 INFO2 waittrk: Now tracking AGES7448_p1_005 2009-Jul-16 03:19:34 LOG4 waittrk: Current telescope position: Az = 276.28 ZA = 3.10 2009-Jul-16 03:19:34 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jul-16 03:19:34 LOG5 finish_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2009-Jul-16 03:19:34 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Jul-16 03:19:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 03:19:34 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jul-16 03:19:34 LOG5 end_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2009-Jul-16 03:19:34 START begin_task: Starting task 'selecting calibration type' 2009-Jul-16 03:19:34 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2009-Jul-16 03:19:34 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jul-16 03:19:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jul-16 03:19:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 03:19:34 START begin_task: Starting task 'waiting on setcal' 2009-Jul-16 03:19:34 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2009-Jul-16 03:19:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jul-16 03:19:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 03:19:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 03:19:35 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-16 03:19:35 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jul-16 03:19:35 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2009-Jul-16 03:19:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jul-16 03:19:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 03:19:36 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jul-16 03:19:36 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 03:19:36 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2009-Jul-16 03:19:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 03:19:36 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 03:19:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 03:19:36 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2009-Jul-16 03:19:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 03:19:36 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jul-16 03:19:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 03:19:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jul-16 03:19:36 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 03:19:36 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2009-Jul-16 03:19:36 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 03:19:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 03:19:36 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2009-Jul-16 03:19:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 03:19:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jul-16 03:19:36 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jul-16 03:19:36 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2009-Jul-16 03:19:36 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-Jul-16 03:19:36 INFO2 astwait: Waiting for 410 seconds from 07:19:36 to 07:26:26 UTC ... 2009-Jul-16 03:19:36 LOG4 send_obs_status: To obs_status: <1> TASKTIME 410 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Jul-16 03:19:36 START begin_task: Starting task 'waiting on waiting for AST time' 2009-Jul-16 03:19:36 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2009-Jul-16 03:26:26 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-Jul-16 03:26:26 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2009-Jul-16 03:26:26 INFO3 astwait: Finished waiting 2009-Jul-16 03:26:26 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jul-16 03:26:26 LOG5 dopset_later: Calling 'dopset_later 60.863869981835087' 2009-Jul-16 03:26:26 INFO3 dopset_later: Setting Doppler correction for 03:27:26 (60.9 seconds from now) 2009-Jul-16 03:26:26 LOG5 antvel: Calling 'antvel 277.220000 3.115660 F 60.863869981835087' 2009-Jul-16 03:26:26 LOG2 antvel: Transforming current Az = 277.22 ZA = 3.12 to apparent RA = 22:50:29.6 Dec = +17:56:05.4 2009-Jul-16 03:26:26 LOG2 antvel: Parameters to Doppler: Heliocentric 26846 2009 197 0.0 2009-Jul-16 03:26:26 INFO5 antvel: Computed antenna velocity: -22.66487 km/s 2009-Jul-16 03:26:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-22.6648718444 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-Jul-16 03:26:26 INFO4 dopset_gen: New sky frequencies: 1381.347861 1381.347861 1381.347861 1381.347861 1381.347861 1381.347861 1381.347861 1381.347861 1381.347861 2009-Jul-16 03:26:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.347861 sky0=1381.347861 sky1=1381.347861 sky2=1381.347861 sky3=1381.347861 sky4=1381.347861 sky5=1381.347861 sky6=1381.347861 sky7=1381.347861 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 03:26:26 LOG2 dopset_gen: Result from 'sky2syn': 1631.347861 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 03:26:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631347861.0} 2009-Jul-16 03:26:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 03:26:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-Jul-16 03:26:26 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-Jul-16 03:26:26 INFO5 fixed_driftmap: Tracking J2000 position: RA = 22:49:03.7 Dec = +17:53:03.2 2009-Jul-16 03:26:26 LOG3 track_source: Calling 'track_source AGES7448_p1_005 224903.7 175303.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Jul-16 03:26:26 START begin_task: Starting task 'sending tracking commands' 2009-Jul-16 03:26:26 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2009-Jul-16 03:26:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_005} INFO {Slewing to source 'AGES7448_p1_005' ...} 2009-Jul-16 03:26:26 INFO1 track_source: Starting to track AGES7448_p1_005 2009-Jul-16 03:26:26 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_005" 2009-Jul-16 03:26:26 LOG3 vw_send: To DATATAKING: set ra 224903.7 2009-Jul-16 03:26:26 LOG3 vw_send: To DATATAKING: set dec 175303.2 2009-Jul-16 03:26:26 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-16 03:26:26 LOG3 vw_send: To DATATAKING: pnt tr 224903.7 175303.2 -CJ 2009-Jul-16 03:26:26 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 03:26:26 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-16 03:26:26 LOG5 finish_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2009-Jul-16 03:26:26 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jul-16 03:26:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 03:26:26 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jul-16 03:26:26 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2009-Jul-16 03:26:26 START begin_task: Starting task 'waiting on telescope' 2009-Jul-16 03:26:26 LOG5 begin_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2009-Jul-16 03:26:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jul-16 03:26:26 LOG3 waittrk: Start waittrk 5 2009-Jul-16 03:26:26 START begin_task: Starting task 'waiting on telescope movement' 2009-Jul-16 03:26:26 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2009-Jul-16 03:26:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631347861.0} 2009-Jul-16 03:26:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 03:26:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 03:26:26 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_005" 2009-Jul-16 03:26:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 03:26:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 03:26:26 LOG4 got_cormsg: From DATATAKING: set ra 224903.7 2009-Jul-16 03:26:26 LOG4 got_cormsg: From DATATAKING: set dec 175303.2 2009-Jul-16 03:26:26 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-16 03:26:26 LOG4 got_cormsg: From DATATAKING: pnt tr 224903.7 175303.2 -CJ 2009-Jul-16 03:26:26 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 03:26:26 LOG4 got_cormsg: From DATATAKING: 224903.7 2009-Jul-16 03:26:26 LOG4 got_cormsg: From DATATAKING: vw% 175303.2 2009-Jul-16 03:26:26 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2009-Jul-16 03:26:31 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jul-16 03:26:31 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2009-Jul-16 03:26:31 START begin_task: Starting task 'waiting on telescope on source' 2009-Jul-16 03:26:31 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2009-Jul-16 03:26:33 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jul-16 03:26:33 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2009-Jul-16 03:26:33 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jul-16 03:26:33 INFO2 waittrk: Now tracking AGES7448_p1_005 2009-Jul-16 03:26:33 LOG4 waittrk: Current telescope position: Az = 276.31 ZA = 3.08 2009-Jul-16 03:26:33 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jul-16 03:26:33 LOG5 finish_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2009-Jul-16 03:26:33 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Jul-16 03:26:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 03:26:33 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jul-16 03:26:33 LOG5 end_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2009-Jul-16 03:26:33 START begin_task: Starting task 'adjusting WAPP power' 2009-Jul-16 03:26:33 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2009-Jul-16 03:26:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Jul-16 03:26:33 INFO2 adjust_power: Starting to adjust WAPP power 2009-Jul-16 03:26:33 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Jul-16 03:26:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Jul-16 03:26:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 03:26:33 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Jul-16 03:26:33 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2009-Jul-16 03:26:33 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Jul-16 03:26:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 03:26:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 03:26:36 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-16 03:26:36 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Jul-16 03:26:36 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2009-Jul-16 03:26:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Jul-16 03:26:36 START begin_task: Starting task 'adjusting WAPP power' 2009-Jul-16 03:26:36 LOG5 begin_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2009-Jul-16 03:26:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Jul-16 03:26:36 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-16 03:26:36 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-16 03:26:36 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-16 03:26:36 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-16 03:26:36 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Jul-16 03:26:36 LOG5 begin_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2009-Jul-16 03:26:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Jul-16 03:26:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 03:26:37 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 3 1 dB --- beam 1: 3 2 dB 2009-Jul-16 03:26:37 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 2 0 dB --- beam 3: 0 0 dB 2009-Jul-16 03:26:37 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 0 dB --- beam 5: 0 0 dB 2009-Jul-16 03:26:37 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 0 0 dB --- beam 7: 0 0 dB 2009-Jul-16 03:26:37 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Jul-16 03:26:37 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Jul-16 03:26:37 LOG5 end_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2009-Jul-16 03:26:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.102 1.059 ALFA beam 1: 0.900 1.102 2009-Jul-16 03:26:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.043 1.045 ALFA beam 3: 0.848 0.715 2009-Jul-16 03:26:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.644 0.403 ALFA beam 5: 1.104 0.986 2009-Jul-16 03:26:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.667 0.103 ALFA beam 7: 0.725 0.126 2009-Jul-16 03:26:37 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jul-16 03:26:37 LOG5 finish_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2009-Jul-16 03:26:37 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Jul-16 03:26:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 03:26:37 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jul-16 03:26:37 LOG5 end_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2009-Jul-16 03:26:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jul-16 03:26:37 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jul-16 03:26:37 LOG5 finish_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2009-Jul-16 03:26:37 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Jul-16 03:26:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 03:26:37 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jul-16 03:26:37 LOG5 end_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2009-Jul-16 03:26:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2009-Jul-16 03:26:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2009-Jul-16 03:26:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2009-Jul-16 03:26:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2009-Jul-16 03:26:37 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-Jul-16 03:26:37 START begin_task: Starting task 'WAPP calibration' 2009-Jul-16 03:26:37 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2009-Jul-16 03:26:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Jul-16 03:26:37 START begin_task: Starting task 'selecting calibration type' 2009-Jul-16 03:26:37 LOG5 begin_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2009-Jul-16 03:26:37 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jul-16 03:26:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jul-16 03:26:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 03:26:37 START begin_task: Starting task 'waiting on setcal' 2009-Jul-16 03:26:37 LOG5 begin_task: Level: (5) ID = <10188> Status = 0 0 0 0 ok 2009-Jul-16 03:26:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2009-Jul-16 03:26:37 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jul-16 03:26:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 03:26:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 03:26:38 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-16 03:26:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jul-16 03:26:38 LOG5 end_task: Level: (5) ID = <10188> Status = 0 0 0 0 ok 2009-Jul-16 03:26:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jul-16 03:26:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 03:26:38 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jul-16 03:26:38 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 03:26:38 LOG5 begin_task: Level: (5) ID = <10189> Status = 0 0 0 0 ok 2009-Jul-16 03:26:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 03:26:38 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 03:26:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 03:26:38 LOG5 end_task: Level: (5) ID = <10189> Status = 0 0 0 0 ok 2009-Jul-16 03:26:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 03:26:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jul-16 03:26:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 03:26:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jul-16 03:26:38 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 03:26:38 LOG5 begin_task: Level: (5) ID = <10190> Status = 0 0 0 0 ok 2009-Jul-16 03:26:38 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 03:26:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 03:26:38 LOG5 end_task: Level: (5) ID = <10190> Status = 0 0 0 0 ok 2009-Jul-16 03:26:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 03:26:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jul-16 03:26:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jul-16 03:26:38 LOG5 end_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2009-Jul-16 03:26:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Jul-16 03:26:38 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jul-16 03:26:38 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jul-16 03:26:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-16 03:26:38 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2009-Jul-16 03:26:38 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-16 03:26:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jul-16 03:26:38 NOTE WAPPDATA-new_file: New FITS file: wapp.20090716.a2048.0003.fits 2009-Jul-16 03:26:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-16 03:26:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-16 03:26:38 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2009-Jul-16 03:26:38 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-Jul-16 03:26:38 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-Jul-16 03:26:38 START begin_task: Starting task 'WAPP spectral observation' 2009-Jul-16 03:26:38 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2009-Jul-16 03:26:38 LOG5 log_alfabeam: Parameters: 22.817694444444449 17.884222222222224 22.611682 2009.5397494739777 -80.500031 2009-Jul-16 03:26:38 LOG4 log_alfabeam: ALFABEAM 0 22.817694444444435 17.884222222222220 2009-Jul-16 03:26:38 LOG4 log_alfabeam: ALFABEAM 1 22.819318703221629 17.793248056051038 2009-Jul-16 03:26:38 LOG4 log_alfabeam: ALFABEAM 2 22.824823822482774 17.853498860496721 2009-Jul-16 03:26:38 LOG4 log_alfabeam: ALFABEAM 3 22.823074300923775 17.945797684960500 2009-Jul-16 03:26:38 LOG4 log_alfabeam: ALFABEAM 4 22.815882350510623 17.973483280660560 2009-Jul-16 03:26:38 LOG4 log_alfabeam: ALFABEAM 5 22.810547039675935 17.913877886900192 2009-Jul-16 03:26:38 LOG4 log_alfabeam: ALFABEAM 6 22.812237865599023 17.825922420955571 2009-Jul-16 03:26:38 INFO2 take_data: Starting WAPP scan: 919700091 2009-Jul-16 03:26:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Jul-16 03:26:39 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jul-16 03:26:39 LOG5 begin_task: Level: (5) ID = <10193> Status = 0 0 0 0 ok 2009-Jul-16 03:26:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 03:26:39 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090716.a2048.0003.fits} 2009-Jul-16 03:26:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:26:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.059 0.900 1.102 2009-Jul-16 03:26:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 1.045 0.848 0.715 2009-Jul-16 03:26:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.644 0.403 1.104 0.986 2009-Jul-16 03:26:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.667 0.103 0.725 0.126 2009-Jul-16 03:26:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26800.00 2009-Jul-16 03:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.347861 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 03:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.347861 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 03:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.347861 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 03:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.347861 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 03:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.347861 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 03:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.347861 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 03:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.347861 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 03:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.347861 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 03:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.347861 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 03:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:26:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 03:26:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jul-16 03:26:45 LOG5 end_task: Level: (5) ID = <10193> Status = 0 0 0 0 ok 2009-Jul-16 03:26:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jul-16 03:26:45 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2009-Jul-16 03:26:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Jul-16 03:26:45 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jul-16 03:26:45 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jul-16 03:26:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-16 03:26:45 LOG5 begin_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2009-Jul-16 03:26:45 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-16 03:26:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-16 03:26:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-16 03:26:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-16 03:26:45 LOG5 end_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2009-Jul-16 03:26:45 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-Jul-16 03:26:45 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-Jul-16 03:26:45 START begin_task: Starting task 'WAPP spectral observation' 2009-Jul-16 03:26:45 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2009-Jul-16 03:26:45 LOG5 log_alfabeam: Parameters: 22.817694444444449 17.884222222222224 22.613632 2009.5397496957944 -80.500031 2009-Jul-16 03:26:45 LOG4 log_alfabeam: ALFABEAM 0 22.817694444444431 17.884222222222228 2009-Jul-16 03:26:45 LOG4 log_alfabeam: ALFABEAM 1 22.819310439748367 17.793213684972685 2009-Jul-16 03:26:45 LOG4 log_alfabeam: ALFABEAM 2 22.824821241280947 17.853376020028303 2009-Jul-16 03:26:45 LOG4 log_alfabeam: ALFABEAM 3 22.823078926016795 17.945723286246618 2009-Jul-16 03:26:45 LOG4 log_alfabeam: ALFABEAM 4 22.815888797042465 17.973505332408461 2009-Jul-16 03:26:45 LOG4 log_alfabeam: ALFABEAM 5 22.810549388143514 17.913991898260782 2009-Jul-16 03:26:45 LOG4 log_alfabeam: ALFABEAM 6 22.812232783001228 17.826028040991574 2009-Jul-16 03:26:45 INFO2 take_data: Starting WAPP scan: 919700092 2009-Jul-16 03:26:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Jul-16 03:26:46 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jul-16 03:26:46 LOG5 begin_task: Level: (5) ID = <10196> Status = 0 0 0 0 ok 2009-Jul-16 03:26:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 03:26:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26807.00 2009-Jul-16 03:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 2.003 (still bad) 2009-Jul-16 03:26:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.347861 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 03:26:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.347861 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 03:26:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.347861 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 03:26:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.347861 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 03:26:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.347861 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 03:26:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.347861 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 03:26:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.347861 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 03:26:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.347861 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 03:26:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.347861 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 03:26:52 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-Jul-16 03:26:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 03:26:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jul-16 03:26:52 LOG5 end_task: Level: (5) ID = <10196> Status = 0 0 0 0 ok 2009-Jul-16 03:26:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jul-16 03:26:52 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2009-Jul-16 03:26:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jul-16 03:26:52 STOP finish_task: Finishing task 'WAPP calibration' 2009-Jul-16 03:26:52 LOG5 finish_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2009-Jul-16 03:26:52 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Jul-16 03:26:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 03:26:52 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Jul-16 03:26:52 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2009-Jul-16 03:26:52 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-Jul-16 03:26:52 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 277.22 and ZA = 3.12 2009-Jul-16 03:26:52 LOG3 track_source: Calling 'track_source AGES7448_p1_005 277.22 3.1156596334 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Jul-16 03:26:52 START begin_task: Starting task 'sending tracking commands' 2009-Jul-16 03:26:52 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2009-Jul-16 03:26:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_005} INFO {Slewing to source 'AGES7448_p1_005' ...} 2009-Jul-16 03:26:52 INFO1 track_source: Starting to track AGES7448_p1_005 2009-Jul-16 03:26:52 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_005" 2009-Jul-16 03:26:52 LOG3 vw_send: To DATATAKING: set ra 277.22 2009-Jul-16 03:26:52 LOG3 vw_send: To DATATAKING: set dec 3.1156596334 2009-Jul-16 03:26:52 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-16 03:26:52 LOG3 vw_send: To DATATAKING: pnt tr 277.22 3.1156596334 -CF 2009-Jul-16 03:26:52 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 03:26:52 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-16 03:26:52 LOG5 finish_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2009-Jul-16 03:26:52 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jul-16 03:26:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 03:26:53 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jul-16 03:26:53 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2009-Jul-16 03:26:53 LOG1 fixed_driftmap: Parameters: HA = -00:12:59.8 Start = 22:37:30.1 LST = 22:36:56.1 diff = 34.0 secs 2009-Jul-16 03:26:53 INFO2 fixed_driftmap: Waiting 32 seconds for RA 22:50:30 2009-Jul-16 03:26:53 INFO2 lstwait: Waiting for 31.9 secs from LST 22:36:56 to LST 22:37:28 ... 2009-Jul-16 03:26:53 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.867658000079164 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Jul-16 03:26:53 START begin_task: Starting task 'waiting on wait on LST' 2009-Jul-16 03:26:53 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2009-Jul-16 03:26:53 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_005" 2009-Jul-16 03:26:53 LOG4 got_cormsg: From DATATAKING: set ra 277.22 2009-Jul-16 03:26:53 LOG4 got_cormsg: From DATATAKING: set dec 3.1156596334 2009-Jul-16 03:26:53 LOG4 got_cormsg: From DATATAKING: vw% 277.22 2009-Jul-16 03:26:53 LOG4 got_cormsg: From DATATAKING: vw% 3.1156596334 2009-Jul-16 03:26:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 03:26:53 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-16 03:26:53 LOG4 got_cormsg: From DATATAKING: pnt tr 277.22 3.1156596334 -CF 2009-Jul-16 03:26:53 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 03:26:53 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jul-16 03:26:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 03:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:27:25 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Jul-16 03:27:25 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2009-Jul-16 03:27:25 LOG4 lstwait: Finished waiting 0.13 seconds late 2009-Jul-16 03:27:25 INFO3 lstwait: Finished waiting 2009-Jul-16 03:27:25 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jul-16 03:27:25 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-Jul-16 03:27:25 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Jul-16 03:27:25 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-Jul-16 03:27:25 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Jul-16 03:27:25 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-Jul-16 03:27:25 START begin_task: Starting task 'WAPP spectral observation' 2009-Jul-16 03:27:25 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2009-Jul-16 03:27:25 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jul-16 03:27:25 INFO2 take_data: Starting WAPP scan: 919700093 2009-Jul-16 03:27:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-Jul-16 03:27:25 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jul-16 03:27:25 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2009-Jul-16 03:27:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 03:27:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26846.00 2009-Jul-16 03:27:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.347861 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 03:27:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.347861 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 03:27:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.347861 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 03:27:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.347861 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 03:27:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.347861 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 03:27:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.347861 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 03:27:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.347861 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 03:27:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.347861 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 03:27:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.347861 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 03:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Jul-16 03:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.105 (still bad) 2009-Jul-16 03:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:27:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:27:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.097 1.054 0.900 1.102 2009-Jul-16 03:27:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 1.047 0.850 0.715 2009-Jul-16 03:27:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.644 0.400 1.100 0.987 2009-Jul-16 03:27:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.667 0.103 0.724 0.126 2009-Jul-16 03:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Jul-16 03:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Jul-16 03:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Jul-16 03:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:28:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:28:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 1.058 0.899 1.104 2009-Jul-16 03:28:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 1.044 0.850 0.714 2009-Jul-16 03:28:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.645 0.401 1.100 0.988 2009-Jul-16 03:28:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.103 0.724 0.126 2009-Jul-16 03:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:29:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:29:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.097 1.054 0.898 1.105 2009-Jul-16 03:29:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 1.046 0.850 0.714 2009-Jul-16 03:29:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.644 0.402 1.100 0.991 2009-Jul-16 03:29:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.667 0.103 0.724 0.125 2009-Jul-16 03:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.103 (still bad) 2009-Jul-16 03:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:30:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:30:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.055 0.898 1.104 2009-Jul-16 03:30:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 1.046 0.850 0.714 2009-Jul-16 03:30:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.643 0.401 1.099 0.989 2009-Jul-16 03:30:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.103 0.724 0.125 2009-Jul-16 03:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.101 (still bad) 2009-Jul-16 03:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:31:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:31:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.098 1.054 0.899 1.103 2009-Jul-16 03:31:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.045 1.045 0.851 0.713 2009-Jul-16 03:31:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.642 0.399 1.098 0.986 2009-Jul-16 03:31:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.665 0.103 0.723 0.125 2009-Jul-16 03:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:32:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:32:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.055 0.900 1.103 2009-Jul-16 03:32:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 1.044 0.849 0.713 2009-Jul-16 03:32:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.643 0.401 1.098 0.987 2009-Jul-16 03:32:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.664 0.103 0.722 0.125 2009-Jul-16 03:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Jul-16 03:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:33:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:33:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 1.054 0.899 1.102 2009-Jul-16 03:33:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 1.046 0.849 0.714 2009-Jul-16 03:33:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.643 0.401 1.098 0.988 2009-Jul-16 03:33:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.664 0.103 0.722 0.125 2009-Jul-16 03:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:34:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:34:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.056 0.900 1.105 2009-Jul-16 03:34:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.046 1.047 0.851 0.715 2009-Jul-16 03:34:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.644 0.401 1.098 0.992 2009-Jul-16 03:34:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.103 0.723 0.126 2009-Jul-16 03:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:35:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:35:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.054 0.900 1.104 2009-Jul-16 03:35:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 1.046 0.852 0.715 2009-Jul-16 03:35:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.643 0.401 1.099 0.990 2009-Jul-16 03:35:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.665 0.103 0.723 0.126 2009-Jul-16 03:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:36:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:36:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.054 0.899 1.102 2009-Jul-16 03:36:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.044 1.045 0.852 0.714 2009-Jul-16 03:36:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.643 0.401 1.097 0.989 2009-Jul-16 03:36:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.103 0.724 0.126 2009-Jul-16 03:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:37:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:37:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.054 0.898 1.105 2009-Jul-16 03:37:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.044 1.045 0.848 0.714 2009-Jul-16 03:37:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.642 0.401 1.099 0.985 2009-Jul-16 03:37:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.103 0.723 0.126 2009-Jul-16 03:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:38:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:38:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.056 0.900 1.104 2009-Jul-16 03:38:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 1.046 0.851 0.715 2009-Jul-16 03:38:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.643 0.402 1.099 0.992 2009-Jul-16 03:38:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.665 0.103 0.723 0.126 2009-Jul-16 03:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:39:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:39:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.058 0.899 1.104 2009-Jul-16 03:39:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 1.045 0.851 0.713 2009-Jul-16 03:39:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.644 0.402 1.101 0.987 2009-Jul-16 03:39:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.103 0.724 0.126 2009-Jul-16 03:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:40:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:40:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.055 0.899 1.102 2009-Jul-16 03:40:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 1.045 0.849 0.714 2009-Jul-16 03:40:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.643 0.402 1.100 0.989 2009-Jul-16 03:40:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.664 0.103 0.723 0.125 2009-Jul-16 03:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:41:15 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 03:41:15.298 (seconds: 13275.298)!} 2009-Jul-16 03:41:15 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 03:41:15.298 (seconds: 13275.298)! 2009-Jul-16 03:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:41:16 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 13274.0 to 13275.0! 2009-Jul-16 03:41:17 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (13274.0 - 13276.0)! 2009-Jul-16 03:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:41:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:41:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.056 0.900 1.102 2009-Jul-16 03:41:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.045 1.046 0.850 0.715 2009-Jul-16 03:41:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.643 0.403 1.100 0.989 2009-Jul-16 03:41:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.103 0.724 0.126 2009-Jul-16 03:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Jul-16 03:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:43:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:43:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.056 0.899 1.104 2009-Jul-16 03:43:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.044 1.046 0.852 0.715 2009-Jul-16 03:43:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.643 0.402 1.099 0.991 2009-Jul-16 03:43:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.103 0.724 0.126 2009-Jul-16 03:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:44:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:44:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.059 0.900 1.104 2009-Jul-16 03:44:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 1.049 0.852 0.716 2009-Jul-16 03:44:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.644 0.403 1.101 0.992 2009-Jul-16 03:44:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.665 0.103 0.723 0.126 2009-Jul-16 03:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Jul-16 03:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Jul-16 03:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 03:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:45:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:45:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.057 0.901 1.106 2009-Jul-16 03:45:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.045 1.050 0.851 0.716 2009-Jul-16 03:45:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.644 0.404 1.098 0.988 2009-Jul-16 03:45:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.666 0.103 0.724 0.126 2009-Jul-16 03:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Jul-16 03:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.105 (still bad) 2009-Jul-16 03:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 03:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jul-16 03:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 03:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:46:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:46:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.057 0.900 1.106 2009-Jul-16 03:46:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 1.048 0.852 0.716 2009-Jul-16 03:46:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.644 0.403 1.100 0.990 2009-Jul-16 03:46:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.667 0.103 0.726 0.126 2009-Jul-16 03:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 03:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.106 (still bad) 2009-Jul-16 03:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 03:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:47:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 03:47:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.057 0.900 1.107 2009-Jul-16 03:47:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 1.047 0.853 0.716 2009-Jul-16 03:47:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.643 0.403 1.100 0.988 2009-Jul-16 03:47:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.667 0.103 0.725 0.126 2009-Jul-16 03:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 03:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 03:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:47:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 03:47:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jul-16 03:47:26 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2009-Jul-16 03:47:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jul-16 03:47:26 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2009-Jul-16 03:47:26 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Jul-16 03:47:26 LOG5 finish_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2009-Jul-16 03:47:26 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-Jul-16 03:47:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-16 03:47:26 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-Jul-16 03:47:26 LOG5 end_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2009-Jul-16 03:47:26 COMMAND run_command_line: EXECUTING command 26: 'ENDIF' 2009-Jul-16 03:47:26 COMMAND run_command_line: EXECUTING command 29: 'IF LSTSLEW(AGES7448_p1_007) < 230329 THEN' 2009-Jul-16 03:47:27 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p1_007) < 230329 2009-Jul-16 03:47:27 INFO5 is_if_valid: Condition parsed as: 23.069298 < 23.058055555555555 2009-Jul-16 03:47:27 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES7448_p1_007) < 230329 THEN' 2009-Jul-16 03:47:27 COMMAND run_command_line: EXECUTING command 30: 'FIXEDDRIFT az=81.87 alfaangle=-60.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_007 ra=225000.00 dec=175000.00' 2009-Jul-16 03:47:27 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=81.87 alfaangle=-60.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_007 ra=225000.00 dec=175000.00' in non-true conditional branch 2009-Jul-16 03:47:27 COMMAND run_command_line: EXECUTING command 33: 'ENDIF' 2009-Jul-16 03:47:27 COMMAND run_command_line: EXECUTING command 36: 'IF LSTSLEW(AGES7448_p1_009) < 232629 THEN' 2009-Jul-16 03:47:27 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p1_009) < 232629 2009-Jul-16 03:47:27 INFO5 is_if_valid: Condition parsed as: 23.067631333333335 < 23.441388888888888 2009-Jul-16 03:47:28 COMMAND run_command_line: EXECUTING command 37: 'FIXEDDRIFT az=87.93 alfaangle=-65.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_009 ra=225000.00 dec=174700.00' 2009-Jul-16 03:47:28 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-Jul-16 03:47:28 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-16 03:47:28 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 87.93 -65.2 hcorcal 5 tracking no first 1 AGES7448_p1_009 225000.00 174700.00 J 8500.0 Heliocentric velocity(optical)' 2009-Jul-16 03:47:28 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Jul-16 03:47:28 LOG5 begin_task: Level: (2) ID = <10201> Status = 0 0 0 0 ok 2009-Jul-16 03:47:28 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES7448_p1_005' 2009-Jul-16 03:47:28 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Jul-16 03:47:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p1_009} 2009-Jul-16 03:47:28 INFO3 fixed_driftmap: Sending telescope to Az = 87.93 and ZA = 8.56 2009-Jul-16 03:47:28 LOG3 track_source: Calling 'track_source AGES7448_p1_009 87.93 8.5594306400 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Jul-16 03:47:28 START begin_task: Starting task 'sending tracking commands' 2009-Jul-16 03:47:28 LOG5 begin_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2009-Jul-16 03:47:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_009} INFO {Slewing to source 'AGES7448_p1_009' ...} 2009-Jul-16 03:47:28 INFO1 track_source: Starting to track AGES7448_p1_009 2009-Jul-16 03:47:28 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_009" 2009-Jul-16 03:47:28 LOG3 vw_send: To DATATAKING: set ra 87.93 2009-Jul-16 03:47:28 LOG3 vw_send: To DATATAKING: set dec 8.5594306400 2009-Jul-16 03:47:28 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-16 03:47:28 LOG3 vw_send: To DATATAKING: pnt tr 87.93 8.5594306400 -CF 2009-Jul-16 03:47:28 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 03:47:28 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-16 03:47:28 LOG5 finish_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2009-Jul-16 03:47:28 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jul-16 03:47:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 03:47:28 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jul-16 03:47:28 LOG5 end_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2009-Jul-16 03:47:28 START begin_task: Starting task 'rotate ALFA to -65.2 degrees' 2009-Jul-16 03:47:28 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2009-Jul-16 03:47:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -65.2 degrees ...} 2009-Jul-16 03:47:28 INFO2 rotate_alfa: ALFA commanded to -65.2 degrees 2009-Jul-16 03:47:28 LOG3 sock_errsend: To ALFAMOTOR: POSITION -65.2 REPLY 2009-Jul-16 03:47:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Jul-16 03:47:28 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Jul-16 03:47:28 LOG5 begin_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2009-Jul-16 03:47:28 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_009" 2009-Jul-16 03:47:28 LOG4 got_cormsg: From DATATAKING: set ra 87.93 2009-Jul-16 03:47:28 LOG4 got_cormsg: From DATATAKING: set dec 8.5594306400 2009-Jul-16 03:47:28 LOG4 got_cormsg: From DATATAKING: vw% 87.93 2009-Jul-16 03:47:28 LOG4 got_cormsg: From DATATAKING: vw% 8.5594306400 2009-Jul-16 03:47:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 03:47:29 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-16 03:47:29 LOG4 got_cormsg: From DATATAKING: pnt tr 87.93 8.5594306400 -CF 2009-Jul-16 03:47:29 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 03:47:29 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jul-16 03:47:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 03:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 03:47:38 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jul-16 03:47:38 INFO3 alfa_motor: ALFA rotator in-position -65.20 degrees 2009-Jul-16 03:47:38 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Jul-16 03:47:38 LOG5 end_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2009-Jul-16 03:47:38 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jul-16 03:47:38 STOP finish_task: Finishing task 'rotate ALFA to -65.2 degrees' 2009-Jul-16 03:47:38 LOG5 finish_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2009-Jul-16 03:47:38 INFO2 finish_task: DONE finished configuration: rotating ALFA to -65.2 degrees 2009-Jul-16 03:47:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 03:47:38 STOP end_task: Finishing task 'rotate ALFA to -65.2 degrees' with status 'OK' 2009-Jul-16 03:47:38 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2009-Jul-16 03:47:38 START begin_task: Starting task 'waiting on telescope' 2009-Jul-16 03:47:38 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2009-Jul-16 03:47:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jul-16 03:47:38 LOG3 waittrk: Start waittrk 5 2009-Jul-16 03:47:38 START begin_task: Starting task 'waiting on telescope movement' 2009-Jul-16 03:47:38 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2009-Jul-16 03:47:43 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jul-16 03:47:43 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2009-Jul-16 03:47:43 START begin_task: Starting task 'waiting on telescope on source' 2009-Jul-16 03:47:43 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2009-Jul-16 03:54:34 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jul-16 03:54:34 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2009-Jul-16 03:54:34 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jul-16 03:54:34 INFO2 waittrk: Now tracking AGES7448_p1_009 2009-Jul-16 03:54:34 LOG4 waittrk: Current telescope position: Az = 447.82 ZA = 8.55 2009-Jul-16 03:54:34 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jul-16 03:54:34 LOG5 finish_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2009-Jul-16 03:54:34 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Jul-16 03:54:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 03:54:34 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jul-16 03:54:34 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2009-Jul-16 03:54:34 START begin_task: Starting task 'selecting calibration type' 2009-Jul-16 03:54:34 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2009-Jul-16 03:54:34 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jul-16 03:54:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jul-16 03:54:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 03:54:34 START begin_task: Starting task 'waiting on setcal' 2009-Jul-16 03:54:34 LOG5 begin_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2009-Jul-16 03:54:34 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jul-16 03:54:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 03:54:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 03:54:35 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-16 03:54:35 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jul-16 03:54:35 LOG5 end_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2009-Jul-16 03:54:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jul-16 03:54:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 03:54:36 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jul-16 03:54:36 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 03:54:36 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2009-Jul-16 03:54:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 03:54:36 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 03:54:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 03:54:36 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2009-Jul-16 03:54:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 03:54:36 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jul-16 03:54:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 03:54:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jul-16 03:54:36 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 03:54:36 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2009-Jul-16 03:54:36 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 03:54:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 03:54:36 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2009-Jul-16 03:54:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 03:54:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jul-16 03:54:36 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jul-16 03:54:36 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2009-Jul-16 03:54:36 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-Jul-16 03:54:36 INFO2 astwait: Waiting for 1239 seconds from 07:54:36 to 08:15:15 UTC ... 2009-Jul-16 03:54:36 LOG4 send_obs_status: To obs_status: <1> TASKTIME 1239 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Jul-16 03:54:36 START begin_task: Starting task 'waiting on waiting for AST time' 2009-Jul-16 03:54:36 LOG5 begin_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2009-Jul-16 04:01:54 COMMAND CIMA-send_to_exec: Sending command to stop observation 2009-Jul-16 04:01:54 LOG4 exec_msg: From OBSERVER: stop_task 2009-Jul-16 04:01:54 WARNING stop_task: WARNING stop at end of current loop/command requested! 2009-Jul-16 04:02:02 COMMAND CIMA-send_to_exec: Sending command to abort observation 2009-Jul-16 04:02:02 LOG4 exec_msg: From OBSERVER: abort_task abort 2009-Jul-16 04:02:02 WARNING abort_task: WARNING abort requested! 2009-Jul-16 04:02:02 WARNING abort_task: WARNING Aborting wait for waiting on waiting for AST time 2009-Jul-16 04:02:02 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'ABORT' 2009-Jul-16 04:02:02 LOG5 end_task: Level: (3) ID = <10212> Status = 1 0 1 0 abort 2009-Jul-16 04:02:02 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jul-16 04:02:02 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Jul-16 04:02:02 LOG5 finish_task: Level: (2) ID = <10201> Status = 1 0 1 0 abort 2009-Jul-16 04:02:02 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2009-Jul-16 04:02:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2009-Jul-16 04:02:02 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2009-Jul-16 04:02:02 LOG5 end_task: Level: (2) ID = <10201> Status = 1 0 1 0 abort 2009-Jul-16 04:02:02 ALERT run_command_file: Stopping command file processing at line 37! 2009-Jul-16 04:02:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Jul-16 04:02:02 STOP finish_task: Finishing task 'running command file '090713.cmd'' 2009-Jul-16 04:02:02 LOG5 finish_task: Level: (1) ID = <10091> Status = 1 0 1 0 abort 2009-Jul-16 04:02:02 WARNING finish_task: WARNING aborted running: command file '090713.cmd' 2009-Jul-16 04:02:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2009-Jul-16 04:02:02 END end_task: Finishing task 'running command file '090713.cmd'' with status 'ABORT' 2009-Jul-16 04:02:03 LOG5 end_task: Level: (1) ID = <10091> Status = 1 0 1 0 abort 2009-Jul-16 04:02:37 INFO1 CIMA-run_command_file: Transferring command file '090714.cmd ' to executive ... 2009-Jul-16 04:02:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2009-Jul-16 04:02:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2009-Jul-16 04:02:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 5 {CATALOG AGESFull.cat} 2009-Jul-16 04:02:38 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF LSTSLEW(AGES7448_p1_001) < 215028 THEN} 2009-Jul-16 04:02:38 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {FIXEDDRIFT az=268.92 alfaangle=-75.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_001 ra=225000.00 dec=175900.00} 2009-Jul-16 04:02:38 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {ENDIF} 2009-Jul-16 04:02:38 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 15 {IF LSTSLEW(AGES7448_p1_007) < 221329 THEN} 2009-Jul-16 04:02:38 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 16 {FIXEDDRIFT az=271.61 alfaangle=-76.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_007 ra=225000.00 dec=175000.00} 2009-Jul-16 04:02:38 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 19 {ENDIF} 2009-Jul-16 04:02:38 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 22 {IF LSTSLEW(AGES7448_p1_013) < 223629 THEN} 2009-Jul-16 04:02:38 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 23 {FIXEDDRIFT az=280.00 alfaangle=-83.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_013 ra=225000.00 dec=174100.00} 2009-Jul-16 04:02:38 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 26 {ENDIF} 2009-Jul-16 04:02:38 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 29 {IF LSTSLEW(AGES7448_p1_015) < 230429 THEN} 2009-Jul-16 04:02:38 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 30 {FIXEDDRIFT az=79.18 alfaangle=-57.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_015 ra=225000.00 dec=173800.00} 2009-Jul-16 04:02:38 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 33 {ENDIF} 2009-Jul-16 04:02:38 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 36 {IF LSTSLEW(AGES7448_p1_017) < 232729 THEN} 2009-Jul-16 04:02:38 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 37 {FIXEDDRIFT az=86.77 alfaangle=-63.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_017 ra=225000.00 dec=173500.00} 2009-Jul-16 04:02:38 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 40 {ENDIF} 2009-Jul-16 04:02:38 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 43 {IF LSTSLEW(AGES7448_p1_019) < 235029 THEN} 2009-Jul-16 04:02:38 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 44 {FIXEDDRIFT az=89.26 alfaangle=-64.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_019 ra=225000.00 dec=173200.00} 2009-Jul-16 04:02:38 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 47 {ENDIF} 2009-Jul-16 04:02:38 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Jul-16 04:02:38 LOG4 exec_msg: From OBSERVER: run_command_file 090714.cmd 1 1 21 2009-Jul-16 04:02:38 LOG4 run_command_file: Calling 'run_command_file 090714.cmd 1 1 21' 2009-Jul-16 04:02:38 BEGIN begin_task: Starting task 'running command file '090714.cmd'' 2009-Jul-16 04:02:38 LOG5 begin_task: Level: (1) ID = <10213> Status = 0 0 0 0 ok 2009-Jul-16 04:02:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '090714.cmd' ...} 2009-Jul-16 04:02:38 NOTE run_command_file: Starting execution of command file '090714.cmd' from line 1 2009-Jul-16 04:02:38 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2009-Jul-16 04:02:38 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Jul-16 04:02:38 NOTE CIMA-check_config_file: File 'ages_config.conf' contains an ALFA set-up which will be ignored! 2009-Jul-16 04:02:38 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-16 04:02:38 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Jul-16 04:02:38 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Jul-16 04:02:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Jul-16 04:02:40 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-16 04:02:40 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Jul-16 04:02:40 LOG5 begin_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2009-Jul-16 04:02:40 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Jul-16 04:02:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Jul-16 04:02:40 LOG1 config_iflo: Receiver ALFA already selected 2009-Jul-16 04:02:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 04:02:40 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jul-16 04:02:40 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 04:02:40 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2009-Jul-16 04:02:40 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 04:02:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 04:02:40 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2009-Jul-16 04:02:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 04:02:40 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jul-16 04:02:40 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Jul-16 04:02:40 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Jul-16 04:02:40 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Jul-16 04:02:40 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Jul-16 04:02:40 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Jul-16 04:02:40 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Jul-16 04:02:40 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Jul-16 04:02:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2009-Jul-16 04:02:40 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Jul-16 04:02:40 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Jul-16 04:02:40 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Jul-16 04:02:40 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Jul-16 04:02:40 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Jul-16 04:02:40 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Jul-16 04:02:40 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Jul-16 04:02:40 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Jul-16 04:02:40 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Jul-16 04:02:40 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Jul-16 04:02:40 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Jul-16 04:02:40 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Jul-16 04:02:40 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Jul-16 04:02:40 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Jul-16 04:02:40 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Jul-16 04:02:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 04:02:41 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Jul-16 04:02:41 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Jul-16 04:02:41 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Jul-16 04:02:41 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Jul-16 04:02:41 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Jul-16 04:02:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Jul-16 04:02:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 04:02:41 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Jul-16 04:02:41 LOG5 begin_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2009-Jul-16 04:02:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2009-Jul-16 04:02:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Jul-16 04:02:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 04:02:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 04:02:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:02:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:02:41 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Jul-16 04:02:41 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Jul-16 04:02:41 LOG5 end_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2009-Jul-16 04:02:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Jul-16 04:02:41 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Jul-16 04:02:41 LOG5 finish_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2009-Jul-16 04:02:41 DONE finish_task: DONE finished configuration: IF/LO path 2009-Jul-16 04:02:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-16 04:02:41 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Jul-16 04:02:41 LOG5 end_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2009-Jul-16 04:02:41 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Jul-16 04:02:41 LOG5 begin_task: Level: (2) ID = <10217> Status = 0 0 0 0 ok 2009-Jul-16 04:02:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Jul-16 04:02:41 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Jul-16 04:02:41 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Jul-16 04:02:41 START begin_task: Starting task 'selecting calibration port' 2009-Jul-16 04:02:41 LOG5 begin_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2009-Jul-16 04:02:41 LOG3 vw_send: To DATATAKING: calport 3 2009-Jul-16 04:02:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Jul-16 04:02:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 04:02:41 START begin_task: Starting task 'waiting on calport' 2009-Jul-16 04:02:41 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2009-Jul-16 04:02:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:02:41 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Jul-16 04:02:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 04:02:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:02:42 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-16 04:02:42 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Jul-16 04:02:42 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2009-Jul-16 04:02:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Jul-16 04:02:42 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Jul-16 04:02:42 LOG5 end_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2009-Jul-16 04:02:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jul-16 04:02:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jul-16 04:02:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-16 04:02:42 LOG5 begin_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2009-Jul-16 04:02:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:02:42 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-16 04:02:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-16 04:02:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-16 04:02:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-16 04:02:42 LOG5 end_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2009-Jul-16 04:02:42 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Jul-16 04:02:42 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Jul-16 04:02:42 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Jul-16 04:02:42 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Jul-16 04:02:42 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Jul-16 04:02:42 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Jul-16 04:02:42 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Jul-16 04:02:42 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Jul-16 04:02:42 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2009-Jul-16 04:02:42 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2009-Jul-16 04:02:42 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2009-Jul-16 04:02:42 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2009-Jul-16 04:02:42 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Jul-16 04:02:42 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Jul-16 04:02:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-16 04:02:42 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2009-Jul-16 04:02:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Jul-16 04:02:42 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-16 04:02:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Jul-16 04:02:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-16 04:02:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2009-Jul-16 04:02:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-16 04:02:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-16 04:02:42 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2009-Jul-16 04:02:42 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Jul-16 04:02:42 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Jul-16 04:02:42 LOG5 finish_task: Level: (2) ID = <10217> Status = 0 0 0 0 ok 2009-Jul-16 04:02:42 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Jul-16 04:02:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-16 04:02:42 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Jul-16 04:02:42 LOG5 end_task: Level: (2) ID = <10217> Status = 0 0 0 0 ok 2009-Jul-16 04:02:42 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2009-Jul-16 04:02:42 COMMAND run_command_line: EXECUTING command 5: 'CATALOG AGESFull.cat' 2009-Jul-16 04:02:42 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2009-Jul-16 04:02:42 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGES7448_p1_001) < 215028 THEN' 2009-Jul-16 04:02:43 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p1_001) < 215028 2009-Jul-16 04:02:43 INFO5 is_if_valid: Condition parsed as: 23.236105666666667 < 21.841111111111111 2009-Jul-16 04:02:43 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES7448_p1_001) < 215028 THEN' 2009-Jul-16 04:02:43 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=268.92 alfaangle=-75.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_001 ra=225000.00 dec=175900.00' 2009-Jul-16 04:02:43 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=268.92 alfaangle=-75.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_001 ra=225000.00 dec=175900.00' in non-true conditional branch 2009-Jul-16 04:02:43 COMMAND run_command_line: EXECUTING command 12: 'ENDIF' 2009-Jul-16 04:02:43 COMMAND run_command_line: EXECUTING command 15: 'IF LSTSLEW(AGES7448_p1_007) < 221329 THEN' 2009-Jul-16 04:02:43 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p1_007) < 221329 2009-Jul-16 04:02:43 INFO5 is_if_valid: Condition parsed as: 23.236105666666667 < 22.224722222222219 2009-Jul-16 04:02:43 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES7448_p1_007) < 221329 THEN' 2009-Jul-16 04:02:44 COMMAND run_command_line: EXECUTING command 16: 'FIXEDDRIFT az=271.61 alfaangle=-76.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_007 ra=225000.00 dec=175000.00' 2009-Jul-16 04:02:44 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=271.61 alfaangle=-76.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_007 ra=225000.00 dec=175000.00' in non-true conditional branch 2009-Jul-16 04:02:44 COMMAND run_command_line: EXECUTING command 19: 'ENDIF' 2009-Jul-16 04:02:44 COMMAND run_command_line: EXECUTING command 22: 'IF LSTSLEW(AGES7448_p1_013) < 223629 THEN' 2009-Jul-16 04:02:44 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p1_013) < 223629 2009-Jul-16 04:02:44 INFO5 is_if_valid: Condition parsed as: 23.236105666666667 < 22.608055555555556 2009-Jul-16 04:02:44 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES7448_p1_013) < 223629 THEN' 2009-Jul-16 04:02:44 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=280.00 alfaangle=-83.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_013 ra=225000.00 dec=174100.00' 2009-Jul-16 04:02:44 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=280.00 alfaangle=-83.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_013 ra=225000.00 dec=174100.00' in non-true conditional branch 2009-Jul-16 04:02:44 COMMAND run_command_line: EXECUTING command 26: 'ENDIF' 2009-Jul-16 04:02:44 COMMAND run_command_line: EXECUTING command 29: 'IF LSTSLEW(AGES7448_p1_015) < 230429 THEN' 2009-Jul-16 04:02:45 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p1_015) < 230429 2009-Jul-16 04:02:45 INFO5 is_if_valid: Condition parsed as: 23.236105666666667 < 23.074722222222221 2009-Jul-16 04:02:45 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES7448_p1_015) < 230429 THEN' 2009-Jul-16 04:02:45 COMMAND run_command_line: EXECUTING command 30: 'FIXEDDRIFT az=79.18 alfaangle=-57.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_015 ra=225000.00 dec=173800.00' 2009-Jul-16 04:02:45 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=79.18 alfaangle=-57.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_015 ra=225000.00 dec=173800.00' in non-true conditional branch 2009-Jul-16 04:02:45 COMMAND run_command_line: EXECUTING command 33: 'ENDIF' 2009-Jul-16 04:02:45 COMMAND run_command_line: EXECUTING command 36: 'IF LSTSLEW(AGES7448_p1_017) < 232729 THEN' 2009-Jul-16 04:02:45 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p1_017) < 232729 2009-Jul-16 04:02:45 INFO5 is_if_valid: Condition parsed as: 23.236105666666667 < 23.458055555555553 2009-Jul-16 04:02:46 COMMAND run_command_line: EXECUTING command 37: 'FIXEDDRIFT az=86.77 alfaangle=-63.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_017 ra=225000.00 dec=173500.00' 2009-Jul-16 04:02:46 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-Jul-16 04:02:46 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Jul-16 04:02:46 WARNING check_obsmode: WARNING failed to get a response from the CIMA frontend when checking options for 'fixed azimuth drift map'! 2009-Jul-16 04:02:46 NOTE check_obsmode: Assuming that the options are OK 2009-Jul-16 04:02:46 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 86.77 -63.8 hcorcal 5 tracking no first 1 AGES7448_p1_017 225000.00 173500.00 J 8500.0 Heliocentric velocity(optical)' 2009-Jul-16 04:02:46 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Jul-16 04:02:46 LOG5 begin_task: Level: (2) ID = <10222> Status = 0 0 0 0 ok 2009-Jul-16 04:02:46 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES7448_p1_009' 2009-Jul-16 04:02:46 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Jul-16 04:02:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p1_017} 2009-Jul-16 04:02:46 INFO3 fixed_driftmap: Sending telescope to Az = 86.77 and ZA = 8.83 2009-Jul-16 04:02:46 LOG3 track_source: Calling 'track_source AGES7448_p1_017 86.77 8.8261389921 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Jul-16 04:02:46 START begin_task: Starting task 'sending tracking commands' 2009-Jul-16 04:02:46 LOG5 begin_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2009-Jul-16 04:02:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_017} INFO {Slewing to source 'AGES7448_p1_017' ...} 2009-Jul-16 04:02:46 INFO1 track_source: Starting to track AGES7448_p1_017 2009-Jul-16 04:02:46 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_017" 2009-Jul-16 04:02:46 LOG3 vw_send: To DATATAKING: set ra 86.77 2009-Jul-16 04:02:46 LOG3 vw_send: To DATATAKING: set dec 8.8261389921 2009-Jul-16 04:02:46 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-16 04:02:46 LOG3 vw_send: To DATATAKING: pnt tr 86.77 8.8261389921 -CF 2009-Jul-16 04:02:46 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 04:02:46 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-16 04:02:46 LOG5 finish_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2009-Jul-16 04:02:46 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jul-16 04:02:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 04:02:46 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jul-16 04:02:46 LOG5 end_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2009-Jul-16 04:02:46 START begin_task: Starting task 'rotate ALFA to -63.8 degrees' 2009-Jul-16 04:02:46 LOG5 begin_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2009-Jul-16 04:02:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -63.8 degrees ...} 2009-Jul-16 04:02:46 INFO2 rotate_alfa: ALFA commanded to -63.8 degrees 2009-Jul-16 04:02:46 LOG3 sock_errsend: To ALFAMOTOR: POSITION -63.8 REPLY 2009-Jul-16 04:02:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Jul-16 04:02:46 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Jul-16 04:02:46 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2009-Jul-16 04:02:46 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-16 04:02:46 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_017" 2009-Jul-16 04:02:46 LOG4 got_cormsg: From DATATAKING: set ra 86.77 2009-Jul-16 04:02:46 LOG4 got_cormsg: From DATATAKING: set dec 8.8261389921 2009-Jul-16 04:02:46 LOG4 got_cormsg: From DATATAKING: vw% 86.77 2009-Jul-16 04:02:46 LOG4 got_cormsg: From DATATAKING: vw% 8.8261389921 2009-Jul-16 04:02:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:02:46 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-16 04:02:46 LOG4 got_cormsg: From DATATAKING: pnt tr 86.77 8.8261389921 -CF 2009-Jul-16 04:02:46 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 04:02:46 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jul-16 04:02:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:02:49 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jul-16 04:02:49 INFO3 alfa_motor: ALFA rotator in-position -63.80 degrees 2009-Jul-16 04:02:49 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Jul-16 04:02:49 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2009-Jul-16 04:02:49 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jul-16 04:02:49 STOP finish_task: Finishing task 'rotate ALFA to -63.8 degrees' 2009-Jul-16 04:02:49 LOG5 finish_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2009-Jul-16 04:02:49 INFO2 finish_task: DONE finished configuration: rotating ALFA to -63.8 degrees 2009-Jul-16 04:02:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 04:02:49 STOP end_task: Finishing task 'rotate ALFA to -63.8 degrees' with status 'OK' 2009-Jul-16 04:02:49 LOG5 end_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2009-Jul-16 04:02:49 START begin_task: Starting task 'waiting on telescope' 2009-Jul-16 04:02:49 LOG5 begin_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2009-Jul-16 04:02:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jul-16 04:02:49 LOG3 waittrk: Start waittrk 5 2009-Jul-16 04:02:49 START begin_task: Starting task 'waiting on telescope movement' 2009-Jul-16 04:02:49 LOG5 begin_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2009-Jul-16 04:02:54 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jul-16 04:02:54 LOG5 end_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2009-Jul-16 04:02:54 START begin_task: Starting task 'waiting on telescope on source' 2009-Jul-16 04:02:54 LOG5 begin_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2009-Jul-16 04:03:03 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jul-16 04:03:03 LOG5 end_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2009-Jul-16 04:03:03 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jul-16 04:03:03 INFO2 waittrk: Now tracking AGES7448_p1_017 2009-Jul-16 04:03:03 LOG4 waittrk: Current telescope position: Az = 446.66 ZA = 8.82 2009-Jul-16 04:03:03 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jul-16 04:03:03 LOG5 finish_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2009-Jul-16 04:03:03 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Jul-16 04:03:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 04:03:03 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jul-16 04:03:03 LOG5 end_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2009-Jul-16 04:03:03 START begin_task: Starting task 'selecting calibration type' 2009-Jul-16 04:03:03 LOG5 begin_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2009-Jul-16 04:03:03 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jul-16 04:03:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jul-16 04:03:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 04:03:03 START begin_task: Starting task 'waiting on setcal' 2009-Jul-16 04:03:03 LOG5 begin_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2009-Jul-16 04:03:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jul-16 04:03:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 04:03:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:03:03 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-16 04:03:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jul-16 04:03:03 LOG5 end_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2009-Jul-16 04:03:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jul-16 04:03:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 04:03:03 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jul-16 04:03:03 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 04:03:03 LOG5 begin_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2009-Jul-16 04:03:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:03:04 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 04:03:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 04:03:04 LOG5 end_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2009-Jul-16 04:03:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 04:03:04 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jul-16 04:03:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 04:03:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jul-16 04:03:04 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 04:03:04 LOG5 begin_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2009-Jul-16 04:03:04 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 04:03:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 04:03:04 LOG5 end_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2009-Jul-16 04:03:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 04:03:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jul-16 04:03:04 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jul-16 04:03:04 LOG5 end_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2009-Jul-16 04:03:04 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-Jul-16 04:03:04 INFO2 astwait: Waiting for 794 seconds from 08:03:04 to 08:16:18 UTC ... 2009-Jul-16 04:03:04 LOG4 send_obs_status: To obs_status: <1> TASKTIME 794 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Jul-16 04:03:04 START begin_task: Starting task 'waiting on waiting for AST time' 2009-Jul-16 04:03:04 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2009-Jul-16 04:03:35 COMMAND CIMA-send_to_exec: Sending command to skip command line 2009-Jul-16 04:03:35 LOG4 exec_msg: From OBSERVER: abort_task skip 2009-Jul-16 04:03:35 WARNING abort_task: WARNING skip requested! 2009-Jul-16 04:03:35 WARNING abort_task: WARNING Skipping wait for waiting on waiting for AST time 2009-Jul-16 04:03:35 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'ABORT' 2009-Jul-16 04:03:35 LOG5 end_task: Level: (3) ID = <10233> Status = 0 1 0 0 abort 2009-Jul-16 04:03:35 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jul-16 04:03:35 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Jul-16 04:03:35 LOG5 finish_task: Level: (2) ID = <10222> Status = 0 1 0 0 abort 2009-Jul-16 04:03:35 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2009-Jul-16 04:03:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2009-Jul-16 04:03:35 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2009-Jul-16 04:03:35 LOG5 end_task: Level: (2) ID = <10222> Status = 0 1 0 0 abort 2009-Jul-16 04:03:35 WARNING run_command_line: WARNING skipping line 37: 'FIXEDDRIFT az=86.77 alfaangle=-63.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_017 ra=225000.00 dec=173500.00'! 2009-Jul-16 04:03:35 COMMAND run_command_line: EXECUTING command 40: 'ENDIF' 2009-Jul-16 04:03:35 COMMAND run_command_line: EXECUTING command 43: 'IF LSTSLEW(AGES7448_p1_019) < 235029 THEN' 2009-Jul-16 04:03:35 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p1_019) < 235029 2009-Jul-16 04:03:35 INFO5 is_if_valid: Condition parsed as: 23.25058966666667 < 23.841388888888886 2009-Jul-16 04:03:35 COMMAND run_command_line: EXECUTING command 44: 'FIXEDDRIFT az=89.26 alfaangle=-64.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_019 ra=225000.00 dec=173200.00' 2009-Jul-16 04:03:36 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-Jul-16 04:03:36 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-16 04:03:36 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 89.26 -64.6 hcorcal 5 tracking no first 1 AGES7448_p1_019 225000.00 173200.00 J 8500.0 Heliocentric velocity(optical)' 2009-Jul-16 04:03:36 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Jul-16 04:03:36 LOG5 begin_task: Level: (2) ID = <10234> Status = 0 0 0 0 ok 2009-Jul-16 04:03:36 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES7448_p1_017' 2009-Jul-16 04:03:36 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Jul-16 04:03:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p1_019} 2009-Jul-16 04:03:36 INFO3 fixed_driftmap: Sending telescope to Az = 89.26 and ZA = 18.75 2009-Jul-16 04:03:36 LOG3 track_source: Calling 'track_source AGES7448_p1_019 89.26 18.7469878876 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Jul-16 04:03:36 START begin_task: Starting task 'sending tracking commands' 2009-Jul-16 04:03:36 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2009-Jul-16 04:03:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_019} INFO {Slewing to source 'AGES7448_p1_019' ...} 2009-Jul-16 04:03:36 INFO1 track_source: Starting to track AGES7448_p1_019 2009-Jul-16 04:03:36 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_019" 2009-Jul-16 04:03:36 LOG3 vw_send: To DATATAKING: set ra 89.26 2009-Jul-16 04:03:36 LOG3 vw_send: To DATATAKING: set dec 18.7469878876 2009-Jul-16 04:03:36 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-16 04:03:36 LOG3 vw_send: To DATATAKING: pnt tr 89.26 18.7469878876 -CF 2009-Jul-16 04:03:36 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 04:03:36 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-16 04:03:36 LOG5 finish_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2009-Jul-16 04:03:36 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jul-16 04:03:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 04:03:36 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jul-16 04:03:36 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2009-Jul-16 04:03:36 START begin_task: Starting task 'rotate ALFA to -64.6 degrees' 2009-Jul-16 04:03:36 LOG5 begin_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2009-Jul-16 04:03:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -64.6 degrees ...} 2009-Jul-16 04:03:36 INFO2 rotate_alfa: ALFA commanded to -64.6 degrees 2009-Jul-16 04:03:36 LOG3 sock_errsend: To ALFAMOTOR: POSITION -64.6 REPLY 2009-Jul-16 04:03:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Jul-16 04:03:36 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Jul-16 04:03:36 LOG5 begin_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2009-Jul-16 04:03:36 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_019" 2009-Jul-16 04:03:36 LOG4 got_cormsg: From DATATAKING: set ra 89.26 2009-Jul-16 04:03:36 LOG4 got_cormsg: From DATATAKING: vw% 89.26 2009-Jul-16 04:03:36 LOG4 got_cormsg: From DATATAKING: 2009-Jul-16 04:03:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:03:36 LOG4 got_cormsg: From DATATAKING: set dec 18.7469878876 2009-Jul-16 04:03:36 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-16 04:03:36 LOG4 got_cormsg: From DATATAKING: pnt tr 89.26 18.7469878876 -CF 2009-Jul-16 04:03:36 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 04:03:36 LOG4 got_cormsg: From DATATAKING: 18.7469878876 2009-Jul-16 04:03:36 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2009-Jul-16 04:03:38 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jul-16 04:03:38 INFO3 alfa_motor: ALFA rotator in-position -64.60 degrees 2009-Jul-16 04:03:38 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Jul-16 04:03:38 LOG5 end_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2009-Jul-16 04:03:38 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jul-16 04:03:38 STOP finish_task: Finishing task 'rotate ALFA to -64.6 degrees' 2009-Jul-16 04:03:38 LOG5 finish_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2009-Jul-16 04:03:38 INFO2 finish_task: DONE finished configuration: rotating ALFA to -64.6 degrees 2009-Jul-16 04:03:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 04:03:38 STOP end_task: Finishing task 'rotate ALFA to -64.6 degrees' with status 'OK' 2009-Jul-16 04:03:38 LOG5 end_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2009-Jul-16 04:03:38 START begin_task: Starting task 'waiting on telescope' 2009-Jul-16 04:03:38 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2009-Jul-16 04:03:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jul-16 04:03:38 LOG3 waittrk: Start waittrk 5 2009-Jul-16 04:03:38 START begin_task: Starting task 'waiting on telescope movement' 2009-Jul-16 04:03:38 LOG5 begin_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2009-Jul-16 04:03:43 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jul-16 04:03:43 LOG5 end_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2009-Jul-16 04:03:43 START begin_task: Starting task 'waiting on telescope on source' 2009-Jul-16 04:03:43 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2009-Jul-16 04:03:51 COMMAND CIMA-send_to_exec: Sending command to skip command line 2009-Jul-16 04:03:51 LOG4 exec_msg: From OBSERVER: abort_task skip 2009-Jul-16 04:03:51 WARNING abort_task: WARNING skip requested! 2009-Jul-16 04:03:51 WARNING abort_task: WARNING Skipping wait for waiting on telescope on source 2009-Jul-16 04:03:51 STOP end_task: Finishing task 'waiting on telescope on source' with status 'ABORT' 2009-Jul-16 04:03:51 LOG5 end_task: Level: (4) ID = <10240> Status = 0 1 0 0 abort 2009-Jul-16 04:03:51 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jul-16 04:03:51 LOG4 waittrk: Current telescope position: Az = 448.96 ZA = 9.26 2009-Jul-16 04:03:51 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jul-16 04:03:51 LOG5 finish_task: Level: (3) ID = <10238> Status = 0 1 0 0 abort 2009-Jul-16 04:03:51 WARNING finish_task: WARNING aborted waiting: telescope on source 2009-Jul-16 04:03:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Aborted 2009-Jul-16 04:03:51 STOP end_task: Finishing task 'waiting on telescope' with status 'ABORT' 2009-Jul-16 04:03:51 LOG5 end_task: Level: (3) ID = <10238> Status = 0 1 0 0 abort 2009-Jul-16 04:03:51 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Jul-16 04:03:51 LOG5 finish_task: Level: (2) ID = <10234> Status = 0 1 0 0 abort 2009-Jul-16 04:03:51 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2009-Jul-16 04:03:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2009-Jul-16 04:03:51 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2009-Jul-16 04:03:51 LOG5 end_task: Level: (2) ID = <10234> Status = 0 1 0 0 abort 2009-Jul-16 04:03:51 WARNING run_command_line: WARNING skipping line 44: 'FIXEDDRIFT az=89.26 alfaangle=-64.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_019 ra=225000.00 dec=173200.00'! 2009-Jul-16 04:03:51 COMMAND run_command_line: EXECUTING command 47: 'ENDIF' 2009-Jul-16 04:03:51 NOTE run_command_file: DONE with command file processing 2009-Jul-16 04:03:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Jul-16 04:03:51 STOP finish_task: Finishing task 'running command file '090714.cmd'' 2009-Jul-16 04:03:51 LOG5 finish_task: Level: (1) ID = <10213> Status = 0 0 0 0 ok 2009-Jul-16 04:03:51 DONE finish_task: DONE finished running: command file '090714.cmd' 2009-Jul-16 04:03:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-16 04:03:51 END end_task: Finishing task 'running command file '090714.cmd'' with status 'OK' 2009-Jul-16 04:03:51 LOG5 end_task: Level: (1) ID = <10213> Status = 0 0 0 0 ok 2009-Jul-16 04:03:54 WARNING CIMA-warn_on_position: WARNING source 'AGES7448_p1_019' is setting in 4 minutes! 2009-Jul-16 04:03:54 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 449.0112 9.4219 RA/Dec = 21:55:00 +17:03:57 2009-Jul-16 04:04:20 INFO1 CIMA-run_command_file: Transferring command file '090712.cmd ' to executive ... 2009-Jul-16 04:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2009-Jul-16 04:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2009-Jul-16 04:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 5 {CATALOG AGESFull.cat} 2009-Jul-16 04:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF LSTSLEW(AGES7448_p3_152) < 215129 THEN} 2009-Jul-16 04:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {FIXEDDRIFT az=283.96 alfaangle=88.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_152 ra=225000.00 dec=141230.00} 2009-Jul-16 04:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {ENDIF} 2009-Jul-16 04:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 15 {IF LSTSLEW(AGES7448_p3_158) < 221429 THEN} 2009-Jul-16 04:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 16 {FIXEDDRIFT az=294.84 alfaangle=78.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_158 ra=225000.00 dec=140330.00} 2009-Jul-16 04:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 19 {ENDIF} 2009-Jul-16 04:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 22 {IF LSTSLEW(AGES7448_p3_160) < 223729 THEN} 2009-Jul-16 04:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 23 {FIXEDDRIFT az=323.52 alfaangle=50.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_160 ra=225000.00 dec=140030.00} 2009-Jul-16 04:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 26 {ENDIF} 2009-Jul-16 04:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 29 {IF LSTSLEW(AGES7448_p2_061) < 230329 THEN} 2009-Jul-16 04:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 30 {FIXEDDRIFT az=60.09 alfaangle=-36.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p2_061 ra=225000.00 dec=162900.00} 2009-Jul-16 04:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 33 {ENDIF} 2009-Jul-16 04:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 36 {IF LSTSLEW(AGES7448_p1_121) < 232629 THEN} 2009-Jul-16 04:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 37 {FIXEDDRIFT az=70.28 alfaangle=-45.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_121 ra=225000.00 dec=145900.00} 2009-Jul-16 04:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 40 {ENDIF} 2009-Jul-16 04:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 43 {IF LSTSLEW(AGES7448_p1_001) < 234929 THEN} 2009-Jul-16 04:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 44 {FIXEDDRIFT az=91.02 alfaangle=-66.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_001 ra=225000.00 dec=175900.00} 2009-Jul-16 04:04:20 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 47 {ENDIF} 2009-Jul-16 04:04:20 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Jul-16 04:04:20 LOG4 exec_msg: From OBSERVER: run_command_file 090712.cmd 1 1 21 2009-Jul-16 04:04:20 LOG4 run_command_file: Calling 'run_command_file 090712.cmd 1 1 21' 2009-Jul-16 04:04:20 BEGIN begin_task: Starting task 'running command file '090712.cmd'' 2009-Jul-16 04:04:20 LOG5 begin_task: Level: (1) ID = <10241> Status = 0 0 0 0 ok 2009-Jul-16 04:04:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '090712.cmd' ...} 2009-Jul-16 04:04:21 NOTE run_command_file: Starting execution of command file '090712.cmd' from line 1 2009-Jul-16 04:04:21 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2009-Jul-16 04:04:21 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Jul-16 04:04:21 NOTE CIMA-check_config_file: File 'ages_config.conf' contains an ALFA set-up which will be ignored! 2009-Jul-16 04:04:21 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-16 04:04:21 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Jul-16 04:04:21 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2009-Jul-16 04:04:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Jul-16 04:04:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Jul-16 04:04:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Jul-16 04:04:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Jul-16 04:04:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Jul-16 04:04:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Jul-16 04:04:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Jul-16 04:04:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2009-Jul-16 04:04:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2009-Jul-16 04:04:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2009-Jul-16 04:04:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2009-Jul-16 04:04:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2009-Jul-16 04:04:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2009-Jul-16 04:04:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2009-Jul-16 04:04:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2009-Jul-16 04:04:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2009-Jul-16 04:04:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Jul-16 04:04:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Jul-16 04:04:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Jul-16 04:04:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Jul-16 04:04:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Jul-16 04:04:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Jul-16 04:04:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Jul-16 04:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Jul-16 04:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Jul-16 04:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Jul-16 04:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Jul-16 04:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Jul-16 04:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Jul-16 04:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Jul-16 04:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Jul-16 04:04:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Jul-16 04:04:23 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-16 04:04:23 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Jul-16 04:04:23 LOG5 begin_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2009-Jul-16 04:04:23 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Jul-16 04:04:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Jul-16 04:04:23 LOG1 config_iflo: Receiver ALFA already selected 2009-Jul-16 04:04:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 04:04:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jul-16 04:04:23 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 04:04:23 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2009-Jul-16 04:04:24 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 04:04:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 04:04:24 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2009-Jul-16 04:04:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 04:04:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jul-16 04:04:24 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Jul-16 04:04:24 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Jul-16 04:04:24 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Jul-16 04:04:24 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Jul-16 04:04:24 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Jul-16 04:04:24 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Jul-16 04:04:24 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Jul-16 04:04:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2009-Jul-16 04:04:24 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Jul-16 04:04:24 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Jul-16 04:04:24 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Jul-16 04:04:24 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Jul-16 04:04:24 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Jul-16 04:04:24 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Jul-16 04:04:24 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Jul-16 04:04:24 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Jul-16 04:04:24 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Jul-16 04:04:24 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Jul-16 04:04:24 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Jul-16 04:04:24 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2009-Jul-16 04:04:24 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Jul-16 04:04:24 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Jul-16 04:04:24 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Jul-16 04:04:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 04:04:24 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Jul-16 04:04:24 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Jul-16 04:04:24 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Jul-16 04:04:24 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Jul-16 04:04:24 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Jul-16 04:04:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Jul-16 04:04:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 04:04:24 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Jul-16 04:04:24 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2009-Jul-16 04:04:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2009-Jul-16 04:04:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 04:04:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 04:04:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:04:24 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Jul-16 04:04:24 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Jul-16 04:04:24 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2009-Jul-16 04:04:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Jul-16 04:04:24 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Jul-16 04:04:24 LOG5 finish_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2009-Jul-16 04:04:24 DONE finish_task: DONE finished configuration: IF/LO path 2009-Jul-16 04:04:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-16 04:04:24 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Jul-16 04:04:24 LOG5 end_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2009-Jul-16 04:04:24 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Jul-16 04:04:24 LOG5 begin_task: Level: (2) ID = <10245> Status = 0 0 0 0 ok 2009-Jul-16 04:04:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Jul-16 04:04:24 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Jul-16 04:04:24 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Jul-16 04:04:24 START begin_task: Starting task 'selecting calibration port' 2009-Jul-16 04:04:24 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2009-Jul-16 04:04:24 LOG3 vw_send: To DATATAKING: calport 3 2009-Jul-16 04:04:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Jul-16 04:04:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 04:04:24 START begin_task: Starting task 'waiting on calport' 2009-Jul-16 04:04:24 LOG5 begin_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2009-Jul-16 04:04:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:04:24 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Jul-16 04:04:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 04:04:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:04:24 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-16 04:04:24 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Jul-16 04:04:24 LOG5 end_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2009-Jul-16 04:04:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Jul-16 04:04:24 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Jul-16 04:04:24 LOG5 end_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2009-Jul-16 04:04:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jul-16 04:04:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jul-16 04:04:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-16 04:04:25 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2009-Jul-16 04:04:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:04:25 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-16 04:04:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-16 04:04:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-16 04:04:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-16 04:04:25 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2009-Jul-16 04:04:25 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Jul-16 04:04:25 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Jul-16 04:04:25 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Jul-16 04:04:25 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Jul-16 04:04:25 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Jul-16 04:04:25 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Jul-16 04:04:25 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Jul-16 04:04:25 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Jul-16 04:04:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2009-Jul-16 04:04:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2009-Jul-16 04:04:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2009-Jul-16 04:04:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2009-Jul-16 04:04:25 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Jul-16 04:04:25 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Jul-16 04:04:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-16 04:04:25 LOG5 begin_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2009-Jul-16 04:04:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Jul-16 04:04:25 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-16 04:04:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Jul-16 04:04:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-16 04:04:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2009-Jul-16 04:04:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-16 04:04:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-16 04:04:25 LOG5 end_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2009-Jul-16 04:04:25 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Jul-16 04:04:25 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Jul-16 04:04:25 LOG5 finish_task: Level: (2) ID = <10245> Status = 0 0 0 0 ok 2009-Jul-16 04:04:25 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Jul-16 04:04:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-16 04:04:25 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Jul-16 04:04:25 LOG5 end_task: Level: (2) ID = <10245> Status = 0 0 0 0 ok 2009-Jul-16 04:04:25 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2009-Jul-16 04:04:25 COMMAND run_command_line: EXECUTING command 5: 'CATALOG AGESFull.cat' 2009-Jul-16 04:04:25 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2009-Jul-16 04:04:25 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGES7448_p3_152) < 215129 THEN' 2009-Jul-16 04:04:26 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p3_152) < 215129 2009-Jul-16 04:04:26 INFO5 is_if_valid: Condition parsed as: 23.267849999999999 < 21.858055555555556 2009-Jul-16 04:04:26 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES7448_p3_152) < 215129 THEN' 2009-Jul-16 04:04:26 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=283.96 alfaangle=88.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_152 ra=225000.00 dec=141230.00' 2009-Jul-16 04:04:26 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=283.96 alfaangle=88.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_152 ra=225000.00 dec=141230.00' in non-true conditional branch 2009-Jul-16 04:04:26 COMMAND run_command_line: EXECUTING command 12: 'ENDIF' 2009-Jul-16 04:04:26 COMMAND run_command_line: EXECUTING command 15: 'IF LSTSLEW(AGES7448_p3_158) < 221429 THEN' 2009-Jul-16 04:04:27 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p3_158) < 221429 2009-Jul-16 04:04:27 INFO5 is_if_valid: Condition parsed as: 23.267849999999999 < 22.241388888888888 2009-Jul-16 04:04:27 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES7448_p3_158) < 221429 THEN' 2009-Jul-16 04:04:27 COMMAND run_command_line: EXECUTING command 16: 'FIXEDDRIFT az=294.84 alfaangle=78.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_158 ra=225000.00 dec=140330.00' 2009-Jul-16 04:04:27 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=294.84 alfaangle=78.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_158 ra=225000.00 dec=140330.00' in non-true conditional branch 2009-Jul-16 04:04:27 COMMAND run_command_line: EXECUTING command 19: 'ENDIF' 2009-Jul-16 04:04:27 COMMAND run_command_line: EXECUTING command 22: 'IF LSTSLEW(AGES7448_p3_160) < 223729 THEN' 2009-Jul-16 04:04:28 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p3_160) < 223729 2009-Jul-16 04:04:28 INFO5 is_if_valid: Condition parsed as: 23.266183333333334 < 22.624722222222221 2009-Jul-16 04:04:28 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES7448_p3_160) < 223729 THEN' 2009-Jul-16 04:04:28 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=323.52 alfaangle=50.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_160 ra=225000.00 dec=140030.00' 2009-Jul-16 04:04:28 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=323.52 alfaangle=50.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p3_160 ra=225000.00 dec=140030.00' in non-true conditional branch 2009-Jul-16 04:04:28 COMMAND run_command_line: EXECUTING command 26: 'ENDIF' 2009-Jul-16 04:04:28 COMMAND run_command_line: EXECUTING command 29: 'IF LSTSLEW(AGES7448_p2_061) < 230329 THEN' 2009-Jul-16 04:04:28 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p2_061) < 230329 2009-Jul-16 04:04:28 INFO5 is_if_valid: Condition parsed as: 23.274516666666667 < 23.058055555555555 2009-Jul-16 04:04:28 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES7448_p2_061) < 230329 THEN' 2009-Jul-16 04:04:28 COMMAND run_command_line: EXECUTING command 30: 'FIXEDDRIFT az=60.09 alfaangle=-36.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p2_061 ra=225000.00 dec=162900.00' 2009-Jul-16 04:04:28 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=60.09 alfaangle=-36.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p2_061 ra=225000.00 dec=162900.00' in non-true conditional branch 2009-Jul-16 04:04:28 COMMAND run_command_line: EXECUTING command 33: 'ENDIF' 2009-Jul-16 04:04:28 COMMAND run_command_line: EXECUTING command 36: 'IF LSTSLEW(AGES7448_p1_121) < 232629 THEN' 2009-Jul-16 04:04:29 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p1_121) < 232629 2009-Jul-16 04:04:29 INFO5 is_if_valid: Condition parsed as: 23.271183333333333 < 23.441388888888888 2009-Jul-16 04:04:29 COMMAND run_command_line: EXECUTING command 37: 'FIXEDDRIFT az=70.28 alfaangle=-45.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_121 ra=225000.00 dec=145900.00' 2009-Jul-16 04:04:29 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-Jul-16 04:04:29 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Jul-16 04:04:29 WARNING check_obsmode: WARNING failed to get a response from the CIMA frontend when checking options for 'fixed azimuth drift map'! 2009-Jul-16 04:04:29 NOTE check_obsmode: Assuming that the options are OK 2009-Jul-16 04:04:29 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 70.28 -45.3 hcorcal 5 tracking no first 1 AGES7448_p1_121 225000.00 145900.00 J 8500.0 Heliocentric velocity(optical)' 2009-Jul-16 04:04:29 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Jul-16 04:04:29 LOG5 begin_task: Level: (2) ID = <10250> Status = 0 0 0 0 ok 2009-Jul-16 04:04:29 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES7448_p1_019' 2009-Jul-16 04:04:29 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Jul-16 04:04:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p1_121} 2009-Jul-16 04:04:29 INFO3 fixed_driftmap: Sending telescope to Az = 70.28 and ZA = 9.23 2009-Jul-16 04:04:29 LOG3 track_source: Calling 'track_source AGES7448_p1_121 70.28 9.2343853074 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Jul-16 04:04:29 START begin_task: Starting task 'sending tracking commands' 2009-Jul-16 04:04:29 LOG5 begin_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2009-Jul-16 04:04:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_121} INFO {Slewing to source 'AGES7448_p1_121' ...} 2009-Jul-16 04:04:29 INFO1 track_source: Starting to track AGES7448_p1_121 2009-Jul-16 04:04:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_121" 2009-Jul-16 04:04:29 LOG3 vw_send: To DATATAKING: set ra 70.28 2009-Jul-16 04:04:29 LOG3 vw_send: To DATATAKING: set dec 9.2343853074 2009-Jul-16 04:04:29 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-16 04:04:30 LOG3 vw_send: To DATATAKING: pnt tr 70.28 9.2343853074 -CF 2009-Jul-16 04:04:30 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 04:04:30 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-16 04:04:30 LOG5 finish_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2009-Jul-16 04:04:30 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jul-16 04:04:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 04:04:30 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jul-16 04:04:30 LOG5 end_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2009-Jul-16 04:04:30 START begin_task: Starting task 'rotate ALFA to -45.3 degrees' 2009-Jul-16 04:04:30 LOG5 begin_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2009-Jul-16 04:04:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -45.3 degrees ...} 2009-Jul-16 04:04:30 INFO2 rotate_alfa: ALFA commanded to -45.3 degrees 2009-Jul-16 04:04:30 LOG3 sock_errsend: To ALFAMOTOR: POSITION -45.3 REPLY 2009-Jul-16 04:04:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Jul-16 04:04:30 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Jul-16 04:04:30 LOG5 begin_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2009-Jul-16 04:04:30 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-16 04:04:30 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_121" 2009-Jul-16 04:04:30 LOG4 got_cormsg: From DATATAKING: set ra 70.28 2009-Jul-16 04:04:30 LOG4 got_cormsg: From DATATAKING: set dec 9.2343853074 2009-Jul-16 04:04:30 LOG4 got_cormsg: From DATATAKING: vw% 70.28 2009-Jul-16 04:04:30 LOG4 got_cormsg: From DATATAKING: vw% 9.2343853074 2009-Jul-16 04:04:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:04:30 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-16 04:04:30 LOG4 got_cormsg: From DATATAKING: pnt tr 70.28 9.2343853074 -CF 2009-Jul-16 04:04:30 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 04:04:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jul-16 04:04:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:04:42 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jul-16 04:04:42 INFO3 alfa_motor: ALFA rotator in-position -45.30 degrees 2009-Jul-16 04:04:42 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Jul-16 04:04:42 LOG5 end_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2009-Jul-16 04:04:42 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jul-16 04:04:42 STOP finish_task: Finishing task 'rotate ALFA to -45.3 degrees' 2009-Jul-16 04:04:42 LOG5 finish_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2009-Jul-16 04:04:42 INFO2 finish_task: DONE finished configuration: rotating ALFA to -45.3 degrees 2009-Jul-16 04:04:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 04:04:42 STOP end_task: Finishing task 'rotate ALFA to -45.3 degrees' with status 'OK' 2009-Jul-16 04:04:42 LOG5 end_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2009-Jul-16 04:04:42 START begin_task: Starting task 'waiting on telescope' 2009-Jul-16 04:04:42 LOG5 begin_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2009-Jul-16 04:04:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jul-16 04:04:42 LOG3 waittrk: Start waittrk 5 2009-Jul-16 04:04:42 START begin_task: Starting task 'waiting on telescope movement' 2009-Jul-16 04:04:42 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2009-Jul-16 04:04:47 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jul-16 04:04:47 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2009-Jul-16 04:04:47 START begin_task: Starting task 'waiting on telescope on source' 2009-Jul-16 04:04:47 LOG5 begin_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2009-Jul-16 04:05:31 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jul-16 04:05:31 LOG5 end_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2009-Jul-16 04:05:31 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jul-16 04:05:31 INFO2 waittrk: Now tracking AGES7448_p1_121 2009-Jul-16 04:05:31 LOG4 waittrk: Current telescope position: Az = 430.16 ZA = 9.22 2009-Jul-16 04:05:31 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jul-16 04:05:31 LOG5 finish_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2009-Jul-16 04:05:31 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Jul-16 04:05:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 04:05:31 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jul-16 04:05:31 LOG5 end_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2009-Jul-16 04:05:31 START begin_task: Starting task 'selecting calibration type' 2009-Jul-16 04:05:31 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2009-Jul-16 04:05:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jul-16 04:05:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jul-16 04:05:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 04:05:31 START begin_task: Starting task 'waiting on setcal' 2009-Jul-16 04:05:31 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2009-Jul-16 04:05:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jul-16 04:05:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 04:05:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:05:31 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-16 04:05:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jul-16 04:05:31 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2009-Jul-16 04:05:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jul-16 04:05:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 04:05:31 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jul-16 04:05:31 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 04:05:31 LOG5 begin_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2009-Jul-16 04:05:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:05:31 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 04:05:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 04:05:31 LOG5 end_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2009-Jul-16 04:05:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 04:05:31 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jul-16 04:05:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 04:05:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jul-16 04:05:31 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 04:05:31 LOG5 begin_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2009-Jul-16 04:05:31 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 04:05:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 04:05:31 LOG5 end_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2009-Jul-16 04:05:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 04:05:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jul-16 04:05:31 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jul-16 04:05:31 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2009-Jul-16 04:05:32 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-Jul-16 04:05:32 INFO2 astwait: Waiting for 586 seconds from 08:05:32 to 08:15:18 UTC ... 2009-Jul-16 04:05:32 LOG4 send_obs_status: To obs_status: <1> TASKTIME 586 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Jul-16 04:05:32 START begin_task: Starting task 'waiting on waiting for AST time' 2009-Jul-16 04:05:32 LOG5 begin_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2009-Jul-16 04:11:13 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 04:11:13.299 (seconds: 15073.299)!} 2009-Jul-16 04:11:13 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 04:11:13.299 (seconds: 15073.299)! 2009-Jul-16 04:15:18 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-Jul-16 04:15:18 LOG5 end_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2009-Jul-16 04:15:18 INFO3 astwait: Finished waiting 2009-Jul-16 04:15:18 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jul-16 04:15:18 LOG5 dopset_later: Calling 'dopset_later 60.563776600148564' 2009-Jul-16 04:15:18 INFO3 dopset_later: Setting Doppler correction for 04:16:18 (60.6 seconds from now) 2009-Jul-16 04:15:18 LOG5 antvel: Calling 'antvel 70.280000 9.234385 F 60.563776600148564' 2009-Jul-16 04:15:18 LOG2 antvel: Transforming current Az = 70.28 ZA = 9.23 to apparent RA = 22:50:29.9 Dec = +15:02:06.2 2009-Jul-16 04:15:18 LOG2 antvel: Parameters to Doppler: Heliocentric 29778 2009 197 0.0 2009-Jul-16 04:15:18 INFO5 antvel: Computed antenna velocity: -22.65488 km/s 2009-Jul-16 04:15:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-22.6548818861 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-Jul-16 04:15:18 INFO4 dopset_gen: New sky frequencies: 1381.347815 1381.347815 1381.347815 1381.347815 1381.347815 1381.347815 1381.347815 1381.347815 1381.347815 2009-Jul-16 04:15:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.347815 sky0=1381.347815 sky1=1381.347815 sky2=1381.347815 sky3=1381.347815 sky4=1381.347815 sky5=1381.347815 sky6=1381.347815 sky7=1381.347815 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Jul-16 04:15:18 LOG2 dopset_gen: Result from 'sky2syn': 1631.347815 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Jul-16 04:15:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631347815.0} 2009-Jul-16 04:15:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 04:15:18 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-Jul-16 04:15:18 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-Jul-16 04:15:18 INFO5 fixed_driftmap: Tracking J2000 position: RA = 22:49:04.0 Dec = +14:59:04.0 2009-Jul-16 04:15:18 LOG3 track_source: Calling 'track_source AGES7448_p1_121 224904.0 145904.0 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Jul-16 04:15:18 START begin_task: Starting task 'sending tracking commands' 2009-Jul-16 04:15:18 LOG5 begin_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2009-Jul-16 04:15:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_121} INFO {Slewing to source 'AGES7448_p1_121' ...} 2009-Jul-16 04:15:18 INFO1 track_source: Starting to track AGES7448_p1_121 2009-Jul-16 04:15:18 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_121" 2009-Jul-16 04:15:18 LOG3 vw_send: To DATATAKING: set ra 224904.0 2009-Jul-16 04:15:18 LOG3 vw_send: To DATATAKING: set dec 145904.0 2009-Jul-16 04:15:18 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-16 04:15:18 LOG3 vw_send: To DATATAKING: pnt tr 224904.0 145904.0 -CJ 2009-Jul-16 04:15:18 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 04:15:18 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-16 04:15:18 LOG5 finish_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2009-Jul-16 04:15:18 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jul-16 04:15:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 04:15:18 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jul-16 04:15:18 LOG5 end_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2009-Jul-16 04:15:18 START begin_task: Starting task 'waiting on telescope' 2009-Jul-16 04:15:18 LOG5 begin_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2009-Jul-16 04:15:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Jul-16 04:15:18 LOG3 waittrk: Start waittrk 5 2009-Jul-16 04:15:18 START begin_task: Starting task 'waiting on telescope movement' 2009-Jul-16 04:15:18 LOG5 begin_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2009-Jul-16 04:15:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631347815.0} 2009-Jul-16 04:15:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Jul-16 04:15:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:15:18 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_121" 2009-Jul-16 04:15:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:15:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:15:18 LOG4 got_cormsg: From DATATAKING: set ra 224904.0 2009-Jul-16 04:15:18 LOG4 got_cormsg: From DATATAKING: set dec 145904.0 2009-Jul-16 04:15:18 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-16 04:15:18 LOG4 got_cormsg: From DATATAKING: pnt tr 224904.0 145904.0 -CJ 2009-Jul-16 04:15:18 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 04:15:18 LOG4 got_cormsg: From DATATAKING: 224904.0 2009-Jul-16 04:15:18 LOG4 got_cormsg: From DATATAKING: vw% 145904.0 2009-Jul-16 04:15:18 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2009-Jul-16 04:15:23 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Jul-16 04:15:23 LOG5 end_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2009-Jul-16 04:15:23 START begin_task: Starting task 'waiting on telescope on source' 2009-Jul-16 04:15:23 LOG5 begin_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2009-Jul-16 04:15:25 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Jul-16 04:15:25 LOG5 end_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2009-Jul-16 04:15:25 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jul-16 04:15:25 INFO2 waittrk: Now tracking AGES7448_p1_121 2009-Jul-16 04:15:25 LOG4 waittrk: Current telescope position: Az = 430.21 ZA = 9.24 2009-Jul-16 04:15:25 STOP finish_task: Finishing task 'waiting on telescope' 2009-Jul-16 04:15:25 LOG5 finish_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2009-Jul-16 04:15:25 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Jul-16 04:15:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 04:15:25 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Jul-16 04:15:25 LOG5 end_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2009-Jul-16 04:15:25 START begin_task: Starting task 'adjusting WAPP power' 2009-Jul-16 04:15:25 LOG5 begin_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2009-Jul-16 04:15:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Jul-16 04:15:25 INFO2 adjust_power: Starting to adjust WAPP power 2009-Jul-16 04:15:25 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Jul-16 04:15:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Jul-16 04:15:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 04:15:25 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Jul-16 04:15:25 LOG5 begin_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2009-Jul-16 04:15:26 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Jul-16 04:15:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 04:15:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:15:29 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-16 04:15:29 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Jul-16 04:15:29 LOG5 end_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2009-Jul-16 04:15:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Jul-16 04:15:29 START begin_task: Starting task 'adjusting WAPP power' 2009-Jul-16 04:15:29 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2009-Jul-16 04:15:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Jul-16 04:15:29 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-16 04:15:30 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-16 04:15:30 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-16 04:15:30 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Jul-16 04:15:30 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Jul-16 04:15:30 LOG5 begin_task: Level: (5) ID = <10269> Status = 0 0 0 0 ok 2009-Jul-16 04:15:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Jul-16 04:15:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:15:30 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 3 1 dB --- beam 1: 3 3 dB 2009-Jul-16 04:15:30 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 2 0 dB --- beam 3: 0 0 dB 2009-Jul-16 04:15:30 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 0 dB --- beam 5: 0 0 dB 2009-Jul-16 04:15:30 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 0 0 dB --- beam 7: 0 0 dB 2009-Jul-16 04:15:30 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Jul-16 04:15:30 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Jul-16 04:15:30 LOG5 end_task: Level: (5) ID = <10269> Status = 0 0 0 0 ok 2009-Jul-16 04:15:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.108 1.070 ALFA beam 1: 0.894 0.905 2009-Jul-16 04:15:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.030 1.008 ALFA beam 3: 0.854 0.717 2009-Jul-16 04:15:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.647 0.398 ALFA beam 5: 1.109 0.988 2009-Jul-16 04:15:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.671 0.103 ALFA beam 7: 0.728 0.126 2009-Jul-16 04:15:30 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jul-16 04:15:30 LOG5 finish_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2009-Jul-16 04:15:30 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Jul-16 04:15:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 04:15:30 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jul-16 04:15:30 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2009-Jul-16 04:15:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jul-16 04:15:30 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Jul-16 04:15:30 LOG5 finish_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2009-Jul-16 04:15:30 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Jul-16 04:15:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 04:15:30 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Jul-16 04:15:30 LOG5 end_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2009-Jul-16 04:15:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 ss 2009-Jul-16 04:15:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 ss 2009-Jul-16 04:15:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 ss 2009-Jul-16 04:15:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 ss 2009-Jul-16 04:15:30 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-Jul-16 04:15:30 START begin_task: Starting task 'WAPP calibration' 2009-Jul-16 04:15:30 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2009-Jul-16 04:15:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Jul-16 04:15:30 START begin_task: Starting task 'selecting calibration type' 2009-Jul-16 04:15:30 LOG5 begin_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2009-Jul-16 04:15:30 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Jul-16 04:15:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Jul-16 04:15:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 04:15:31 START begin_task: Starting task 'waiting on setcal' 2009-Jul-16 04:15:31 LOG5 begin_task: Level: (5) ID = <10272> Status = 0 0 0 0 ok 2009-Jul-16 04:15:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 ss' 2009-Jul-16 04:15:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Jul-16 04:15:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Jul-16 04:15:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:15:31 LOG4 got_cormsg: From DATATAKING: DONE 2009-Jul-16 04:15:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Jul-16 04:15:31 LOG5 end_task: Level: (5) ID = <10272> Status = 0 0 0 0 ok 2009-Jul-16 04:15:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Jul-16 04:15:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 04:15:31 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Jul-16 04:15:31 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 04:15:31 LOG5 begin_task: Level: (5) ID = <10273> Status = 0 0 0 0 ok 2009-Jul-16 04:15:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:15:31 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 04:15:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 04:15:31 LOG5 end_task: Level: (5) ID = <10273> Status = 0 0 0 0 ok 2009-Jul-16 04:15:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 04:15:31 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Jul-16 04:15:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Jul-16 04:15:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Jul-16 04:15:31 START begin_task: Starting task 'waiting on command to ALFA' 2009-Jul-16 04:15:31 LOG5 begin_task: Level: (5) ID = <10274> Status = 0 0 0 0 ok 2009-Jul-16 04:15:31 LOG4 got_alfamon: From ALFAMON: ACK 2009-Jul-16 04:15:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Jul-16 04:15:31 LOG5 end_task: Level: (5) ID = <10274> Status = 0 0 0 0 ok 2009-Jul-16 04:15:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Jul-16 04:15:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Jul-16 04:15:31 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Jul-16 04:15:31 LOG5 end_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2009-Jul-16 04:15:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Jul-16 04:15:31 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Jul-16 04:15:31 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Jul-16 04:15:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-16 04:15:31 LOG5 begin_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2009-Jul-16 04:15:31 NOTE WAPPDATA-new_file: New FITS file: wapp.20090716.a2048.0004.fits 2009-Jul-16 04:15:31 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-16 04:15:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Jul-16 04:15:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-16 04:15:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-16 04:15:31 LOG5 end_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2009-Jul-16 04:15:31 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-Jul-16 04:15:31 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-Jul-16 04:15:31 START begin_task: Starting task 'WAPP spectral observation' 2009-Jul-16 04:15:31 LOG5 begin_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2009-Jul-16 04:15:31 LOG5 log_alfabeam: Parameters: 22.817777777777778 14.984444444444444 23.428635 2009.5398424151392 -45.300045 2009-Jul-16 04:15:31 LOG4 log_alfabeam: ALFABEAM 0 22.817777777777778 14.984444444444437 2009-Jul-16 04:15:31 LOG4 log_alfabeam: ALFABEAM 1 22.817234599470311 15.076450153837426 2009-Jul-16 04:15:31 LOG4 log_alfabeam: ALFABEAM 2 22.811256136613725 15.015864728557840 2009-Jul-16 04:15:31 LOG4 log_alfabeam: ALFABEAM 3 22.811843325032903 14.922982298118900 2009-Jul-16 04:15:31 LOG4 log_alfabeam: ALFABEAM 4 22.818387177125803 14.892280520390399 2009-Jul-16 04:15:31 LOG4 log_alfabeam: ALFABEAM 5 22.824298592217982 14.954114030136823 2009-Jul-16 04:15:31 LOG4 log_alfabeam: ALFABEAM 6 22.823733435562833 15.045404343164954 2009-Jul-16 04:15:31 INFO2 take_data: Starting WAPP scan: 919700094 2009-Jul-16 04:15:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Jul-16 04:15:32 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jul-16 04:15:32 LOG5 begin_task: Level: (5) ID = <10277> Status = 0 0 0 0 ok 2009-Jul-16 04:15:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 04:15:32 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090716.a2048.0004.fits} 2009-Jul-16 04:15:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Jul-16 04:15:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.108 1.070 0.894 0.905 2009-Jul-16 04:15:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 1.008 0.854 0.717 2009-Jul-16 04:15:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.647 0.398 1.109 0.988 2009-Jul-16 04:15:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.671 0.103 0.728 0.126 2009-Jul-16 04:15:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29733.00 2009-Jul-16 04:15:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.347815 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 04:15:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.347815 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 04:15:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.347815 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 04:15:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.347815 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 04:15:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.347815 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 04:15:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.347815 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 04:15:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.347815 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 04:15:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.347815 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 04:15:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.347815 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 04:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 04:15:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 04:15:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jul-16 04:15:38 LOG5 end_task: Level: (5) ID = <10277> Status = 0 0 0 0 ok 2009-Jul-16 04:15:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jul-16 04:15:38 LOG5 end_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2009-Jul-16 04:15:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Jul-16 04:15:38 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Jul-16 04:15:38 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Jul-16 04:15:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Jul-16 04:15:38 LOG5 begin_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2009-Jul-16 04:15:38 LOG3 CALCONTROL-caltrig: Software trigger 2009-Jul-16 04:15:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Jul-16 04:15:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Jul-16 04:15:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Jul-16 04:15:38 LOG5 end_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2009-Jul-16 04:15:38 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-Jul-16 04:15:38 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-Jul-16 04:15:38 START begin_task: Starting task 'WAPP spectral observation' 2009-Jul-16 04:15:38 LOG5 begin_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2009-Jul-16 04:15:38 LOG5 log_alfabeam: Parameters: 22.817777777777778 14.984444444444444 23.430585 2009.5398426369559 -45.300045 2009-Jul-16 04:15:38 LOG4 log_alfabeam: ALFABEAM 0 22.817777777777785 14.984444444444442 2009-Jul-16 04:15:38 LOG4 log_alfabeam: ALFABEAM 1 22.817240895903428 15.076458263071055 2009-Jul-16 04:15:38 LOG4 log_alfabeam: ALFABEAM 2 22.811258318234035 15.015958171385567 2009-Jul-16 04:15:38 LOG4 log_alfabeam: ALFABEAM 3 22.811839034713699 14.923069516083213 2009-Jul-16 04:15:38 LOG4 log_alfabeam: ALFABEAM 4 22.818380684255636 14.892271900369352 2009-Jul-16 04:15:38 LOG4 log_alfabeam: ALFABEAM 5 22.824296480757955 14.954017360527128 2009-Jul-16 04:15:38 LOG4 log_alfabeam: ALFABEAM 6 22.823737640153116 15.045318155180265 2009-Jul-16 04:15:38 INFO2 take_data: Starting WAPP scan: 919700095 2009-Jul-16 04:15:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Jul-16 04:15:39 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jul-16 04:15:39 LOG5 begin_task: Level: (5) ID = <10280> Status = 0 0 0 0 ok 2009-Jul-16 04:15:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 04:15:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29740.00 2009-Jul-16 04:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 2.015 (still bad) 2009-Jul-16 04:15:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.347815 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 04:15:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.347815 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 04:15:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.347815 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 04:15:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.347815 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 04:15:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.347815 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 04:15:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.347815 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 04:15:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.347815 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 04:15:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.347815 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 04:15:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.347815 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 04:15:45 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-Jul-16 04:15:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 04:15:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Jul-16 04:15:45 LOG5 end_task: Level: (5) ID = <10280> Status = 0 0 0 0 ok 2009-Jul-16 04:15:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Jul-16 04:15:45 LOG5 end_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2009-Jul-16 04:15:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Jul-16 04:15:45 STOP finish_task: Finishing task 'WAPP calibration' 2009-Jul-16 04:15:45 LOG5 finish_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2009-Jul-16 04:15:45 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Jul-16 04:15:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 04:15:45 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Jul-16 04:15:45 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2009-Jul-16 04:15:46 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-Jul-16 04:15:46 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 70.28 and ZA = 9.23 2009-Jul-16 04:15:46 LOG3 track_source: Calling 'track_source AGES7448_p1_121 70.28 9.2343853074 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Jul-16 04:15:46 START begin_task: Starting task 'sending tracking commands' 2009-Jul-16 04:15:46 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2009-Jul-16 04:15:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_121} INFO {Slewing to source 'AGES7448_p1_121' ...} 2009-Jul-16 04:15:46 INFO1 track_source: Starting to track AGES7448_p1_121 2009-Jul-16 04:15:46 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_121" 2009-Jul-16 04:15:46 LOG3 vw_send: To DATATAKING: set ra 70.28 2009-Jul-16 04:15:46 LOG3 vw_send: To DATATAKING: set dec 9.2343853074 2009-Jul-16 04:15:46 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-16 04:15:46 LOG3 vw_send: To DATATAKING: pnt tr 70.28 9.2343853074 -CF 2009-Jul-16 04:15:46 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 04:15:46 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-16 04:15:46 LOG5 finish_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2009-Jul-16 04:15:46 INFO2 finish_task: DONE finished sending: tracking commands 2009-Jul-16 04:15:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Jul-16 04:15:46 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Jul-16 04:15:46 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2009-Jul-16 04:15:46 LOG1 fixed_driftmap: Parameters: HA = +00:35:59.8 Start = 23:26:29.8 LST = 23:25:57.1 diff = 32.6 secs 2009-Jul-16 04:15:46 INFO2 fixed_driftmap: Waiting 30.6 seconds for RA 22:50:30 2009-Jul-16 04:15:46 INFO2 lstwait: Waiting for 30.6 secs from LST 23:25:57 to LST 23:26:28 ... 2009-Jul-16 04:15:46 LOG4 send_obs_status: To obs_status: <1> TASKTIME 30.565907032143365 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Jul-16 04:15:46 START begin_task: Starting task 'waiting on wait on LST' 2009-Jul-16 04:15:46 LOG5 begin_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2009-Jul-16 04:15:46 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_121" 2009-Jul-16 04:15:46 LOG4 got_cormsg: From DATATAKING: set ra 70.28 2009-Jul-16 04:15:46 LOG4 got_cormsg: From DATATAKING: set dec 9.2343853074 2009-Jul-16 04:15:46 LOG4 got_cormsg: From DATATAKING: vw% 70.28 2009-Jul-16 04:15:46 LOG4 got_cormsg: From DATATAKING: vw% 9.2343853074 2009-Jul-16 04:15:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:15:46 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-16 04:15:46 LOG4 got_cormsg: From DATATAKING: pnt tr 70.28 9.2343853074 -CF 2009-Jul-16 04:15:46 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 04:15:46 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2009-Jul-16 04:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jul-16 04:16:16 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Jul-16 04:16:16 LOG5 end_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2009-Jul-16 04:16:16 LOG4 lstwait: Finished waiting 0.43 seconds late 2009-Jul-16 04:16:16 INFO3 lstwait: Finished waiting 2009-Jul-16 04:16:16 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Jul-16 04:16:16 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-Jul-16 04:16:17 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Jul-16 04:16:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-Jul-16 04:16:17 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Jul-16 04:16:17 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-Jul-16 04:16:17 START begin_task: Starting task 'WAPP spectral observation' 2009-Jul-16 04:16:17 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2009-Jul-16 04:16:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Jul-16 04:16:17 INFO2 take_data: Starting WAPP scan: 919700096 2009-Jul-16 04:16:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-Jul-16 04:16:17 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Jul-16 04:16:17 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2009-Jul-16 04:16:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Jul-16 04:16:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29778.00 2009-Jul-16 04:16:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.347815 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Jul-16 04:16:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.347815 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 04:16:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.347815 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 04:16:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.347815 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2009-Jul-16 04:16:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.347815 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2009-Jul-16 04:16:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.347815 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 04:16:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.347815 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 04:16:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.347815 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 04:16:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.347815 MHz Flip = 1 Band = 0 Mixer = 1815.000000 MHz 2009-Jul-16 04:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 04:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.110 (still bad) 2009-Jul-16 04:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Jul-16 04:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.107 (still bad) 2009-Jul-16 04:16:26 COMMAND CIMA-send_to_exec: Sending command to skip command line 2009-Jul-16 04:16:26 LOG4 exec_msg: From OBSERVER: abort_task skip 2009-Jul-16 04:16:26 WARNING abort_task: WARNING skip requested! 2009-Jul-16 04:16:26 WARNING abort_task: WARNING Skipping waiting on WAPP spectra 2009-Jul-16 04:16:26 WARNING abort_task: WARNING Skipping wait for waiting on WAPP spectra 2009-Jul-16 04:16:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'ABORT' 2009-Jul-16 04:16:26 LOG5 end_task: Level: (4) ID = <10284> Status = 0 1 0 0 abort 2009-Jul-16 04:16:26 START begin_task: Starting task 'stopping the WAPPs' 2009-Jul-16 04:16:26 LOG5 begin_task: Level: (4) ID = <10285> Status = 0 1 0 0 abort 2009-Jul-16 04:16:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2009-Jul-16 04:16:26 INFO1 stop_wapp: Stopping the WAPPs 2009-Jul-16 04:16:26 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2009-Jul-16 04:16:26 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2009-Jul-16 04:16:26 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2009-Jul-16 04:16:26 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2009-Jul-16 04:16:27 START begin_task: Starting task 'waiting on stopping WAPPs' 2009-Jul-16 04:16:27 LOG5 begin_task: Level: (5) ID = <10286> Status = 0 1 0 0 abort 2009-Jul-16 04:16:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2009-Jul-16 04:16:28 NOTE WAPP=1+2+3+4-wappcon: WAPP successfully aborted! 2009-Jul-16 04:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.108 (still bad) 2009-Jul-16 04:16:28 LOG4 WAPP=1+2+3+4-start_spectra: Abort request received 2009-Jul-16 04:16:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Jul-16 04:16:28 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'ABORT' 2009-Jul-16 04:16:28 LOG5 end_task: Level: (5) ID = <10286> Status = 0 1 0 0 abort 2009-Jul-16 04:16:28 STOP end_task: Finishing task 'stopping the WAPPs' with status 'ABORT' 2009-Jul-16 04:16:28 LOG5 end_task: Level: (4) ID = <10285> Status = 0 1 0 0 abort 2009-Jul-16 04:16:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'ABORT' 2009-Jul-16 04:16:28 LOG5 end_task: Level: (3) ID = <10283> Status = 0 1 0 0 abort 2009-Jul-16 04:16:28 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Jul-16 04:16:28 LOG5 finish_task: Level: (2) ID = <10250> Status = 0 1 0 0 abort 2009-Jul-16 04:16:28 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2009-Jul-16 04:16:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2009-Jul-16 04:16:28 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2009-Jul-16 04:16:28 LOG5 end_task: Level: (2) ID = <10250> Status = 0 1 0 0 abort 2009-Jul-16 04:16:28 WARNING run_command_line: WARNING skipping line 37: 'FIXEDDRIFT az=70.28 alfaangle=-45.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_121 ra=225000.00 dec=145900.00'! 2009-Jul-16 04:16:28 COMMAND run_command_line: EXECUTING command 40: 'ENDIF' 2009-Jul-16 04:16:28 COMMAND run_command_line: EXECUTING command 43: 'IF LSTSLEW(AGES7448_p1_001) < 234929 THEN' 2009-Jul-16 04:16:29 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7448_p1_001) < 234929 2009-Jul-16 04:16:29 INFO5 is_if_valid: Condition parsed as: 23.457845333333331 < 23.824722222222221 2009-Jul-16 04:16:29 COMMAND run_command_line: EXECUTING command 44: 'FIXEDDRIFT az=91.02 alfaangle=-66.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_001 ra=225000.00 dec=175900.00' 2009-Jul-16 04:16:29 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-Jul-16 04:16:29 COMMAND CIMA-send_to_exec: Sending command to skip command line 2009-Jul-16 04:16:29 LOG4 exec_msg: From OBSERVER: abort_task skip 2009-Jul-16 04:16:29 WARNING abort_task: WARNING skip requested! 2009-Jul-16 04:16:29 COMMAND CIMA-send_to_exec: Sending command to skip command line 2009-Jul-16 04:16:29 LOG4 exec_msg: From OBSERVER: abort_task skip 2009-Jul-16 04:16:29 WARNING abort_task: WARNING skip requested! 2009-Jul-16 04:16:29 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Jul-16 04:16:29 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 91.02 -66.7 hcorcal 5 tracking no first 1 AGES7448_p1_001 225000.00 175900.00 J 8500.0 Heliocentric velocity(optical)' 2009-Jul-16 04:16:29 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Jul-16 04:16:29 LOG5 begin_task: Level: (2) ID = <10287> Status = 0 1 0 0 ok 2009-Jul-16 04:16:29 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES7448_p1_121' 2009-Jul-16 04:16:29 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Jul-16 04:16:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7448_p1_001} 2009-Jul-16 04:16:29 INFO3 fixed_driftmap: Sending telescope to Az = 91.02 and ZA = 7.88 2009-Jul-16 04:16:29 LOG3 track_source: Calling 'track_source AGES7448_p1_001 91.02 7.8791851659 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Jul-16 04:16:29 START begin_task: Starting task 'sending tracking commands' 2009-Jul-16 04:16:29 LOG5 begin_task: Level: (3) ID = <10288> Status = 0 1 0 0 ok 2009-Jul-16 04:16:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7448_p1_001} INFO {Slewing to source 'AGES7448_p1_001' ...} 2009-Jul-16 04:16:29 INFO1 track_source: Starting to track AGES7448_p1_001 2009-Jul-16 04:16:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7448_p1_001" 2009-Jul-16 04:16:29 LOG3 vw_send: To DATATAKING: set ra 91.02 2009-Jul-16 04:16:29 LOG3 vw_send: To DATATAKING: set dec 7.8791851659 2009-Jul-16 04:16:29 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Jul-16 04:16:29 LOG3 vw_send: To DATATAKING: pnt tr 91.02 7.8791851659 -CF 2009-Jul-16 04:16:29 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 04:16:29 STOP finish_task: Finishing task 'sending tracking commands' 2009-Jul-16 04:16:29 LOG5 finish_task: Level: (3) ID = <10288> Status = 0 1 0 0 abort 2009-Jul-16 04:16:29 WARNING finish_task: WARNING aborted sending: tracking commands 2009-Jul-16 04:16:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Aborted 2009-Jul-16 04:16:30 STOP end_task: Finishing task 'sending tracking commands' with status 'ABORT' 2009-Jul-16 04:16:30 LOG5 end_task: Level: (3) ID = <10288> Status = 0 1 0 0 abort 2009-Jul-16 04:16:30 START begin_task: Starting task 'rotate ALFA to -66.7 degrees' 2009-Jul-16 04:16:30 LOG5 begin_task: Level: (3) ID = <10289> Status = 0 1 0 0 abort 2009-Jul-16 04:16:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -66.7 degrees ...} 2009-Jul-16 04:16:30 INFO2 rotate_alfa: ALFA commanded to -66.7 degrees 2009-Jul-16 04:16:30 LOG3 sock_errsend: To ALFAMOTOR: POSITION -66.7 REPLY 2009-Jul-16 04:16:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Jul-16 04:16:30 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Jul-16 04:16:30 ALERT rotate_alfa: Current ALFA angle is -45.3 degrees! 2009-Jul-16 04:16:30 STOP finish_task: Finishing task 'rotate ALFA to -66.7 degrees' 2009-Jul-16 04:16:30 LOG5 finish_task: Level: (3) ID = <10289> Status = 0 1 0 0 abort 2009-Jul-16 04:16:30 WARNING finish_task: WARNING aborted configuration: rotating ALFA to -66.7 degrees 2009-Jul-16 04:16:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Aborted 2009-Jul-16 04:16:30 STOP end_task: Finishing task 'rotate ALFA to -66.7 degrees' with status 'ABORT' 2009-Jul-16 04:16:30 LOG5 end_task: Level: (3) ID = <10289> Status = 0 1 0 0 abort 2009-Jul-16 04:16:30 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Jul-16 04:16:30 LOG5 finish_task: Level: (2) ID = <10287> Status = 0 1 0 0 abort 2009-Jul-16 04:16:30 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2009-Jul-16 04:16:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2009-Jul-16 04:16:30 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2009-Jul-16 04:16:30 LOG5 end_task: Level: (2) ID = <10287> Status = 0 1 0 0 abort 2009-Jul-16 04:16:30 WARNING run_command_line: WARNING skipping line 44: 'FIXEDDRIFT az=91.02 alfaangle=-66.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7448_p1_001 ra=225000.00 dec=175900.00'! 2009-Jul-16 04:16:30 COMMAND run_command_line: EXECUTING command 47: 'ENDIF' 2009-Jul-16 04:16:30 NOTE run_command_file: DONE with command file processing 2009-Jul-16 04:16:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Jul-16 04:16:30 STOP finish_task: Finishing task 'running command file '090712.cmd'' 2009-Jul-16 04:16:30 LOG5 finish_task: Level: (1) ID = <10241> Status = 0 0 0 0 ok 2009-Jul-16 04:16:30 DONE finish_task: DONE finished running: command file '090712.cmd' 2009-Jul-16 04:16:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Jul-16 04:16:30 END end_task: Finishing task 'running command file '090712.cmd'' with status 'OK' 2009-Jul-16 04:16:30 LOG5 end_task: Level: (1) ID = <10241> Status = 0 0 0 0 ok 2009-Jul-16 04:16:30 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7448_p1_001" 2009-Jul-16 04:16:30 LOG4 got_cormsg: From DATATAKING: set ra 91.02 2009-Jul-16 04:16:30 LOG4 got_cormsg: From DATATAKING: set dec 7.8791851659 2009-Jul-16 04:16:30 LOG4 got_cormsg: From DATATAKING: vw% 91.02 2009-Jul-16 04:16:30 LOG4 got_cormsg: From DATATAKING: vw% 7.8791851659 2009-Jul-16 04:16:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:16:30 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Jul-16 04:16:30 LOG4 got_cormsg: From DATATAKING: pnt tr 91.02 7.8791851659 -CF 2009-Jul-16 04:16:30 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Jul-16 04:16:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Jul-16 04:16:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:16:43 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Jul-16 04:16:43 INFO3 alfa_motor: ALFA rotator in-position -66.70 degrees 2009-Jul-16 04:17:31 ALERT CIMA-exit_cima: Exiting CIMA ... 2009-Jul-16 04:17:31 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2009-Jul-16 04:17:31 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2009-Jul-16 04:17:31 LOG3 vw_send: To DATATAKING: mvdata a2048 2009-Jul-16 04:17:31 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2009-Jul-16 04:17:31 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2009-Jul-16 04:17:31 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2009-Jul-16 04:17:31 NOTE CIMA-exit_cima: Cleaning up session ... 2009-Jul-16 04:17:31 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2009-Jul-16 04:17:31 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2009-Jul-16 04:17:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:17:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Jul-16 04:17:33 LOG3 exec_msg: Closing socket