2009-May-18 19:45:35 BEGIN executive: CIMA executive starting ... 2009-May-18 19:45:36 NOTE executive: STARTING NEW CIMA SESSION 2009-May-18 19:45:36 INFO1 executive: Using CIMA version 3.0.11 'normal' from 2009-05-18 10:00 2009-May-18 19:45:36 INFO4 executive: This is an ON-LINE session 2009-May-18 19:45:36 INFO4 executive: This is a REMOTE session 2009-May-18 19:45:36 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-May-18 19:45:36 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'E. Momjian' 2009-May-18 19:45:36 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20090518' 2009-May-18 19:45:36 LOG2 log_preferences: Currently applied preferences: 2009-May-18 19:45:36 LOG2 log_preferences: prefs(dailylog) = daily 2009-May-18 19:45:36 LOG2 log_preferences: prefs(offlinelog) = skip 2009-May-18 19:45:36 LOG2 log_preferences: prefs(datawindow) = ignore 2009-May-18 19:45:36 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-May-18 19:45:36 LOG2 log_preferences: prefs(wappfailure) = abort 2009-May-18 19:45:36 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-May-18 19:45:36 LOG2 log_preferences: prefs(logcolours) = full 2009-May-18 19:45:36 LOG2 log_preferences: prefs(displaylevel) = INFO3 2009-May-18 19:45:36 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-May-18 19:45:36 LOG2 log_preferences: prefs(displayformat) = short 2009-May-18 19:45:36 LOG2 log_preferences: prefs(logformat) = new 2009-May-18 19:45:36 LOG2 log_preferences: prefs(fontsize) = 4 2009-May-18 19:45:36 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-May-18 19:45:36 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2009-May-18 19:45:36 ALERT executive: CIMA executive ready 2009-May-18 19:45:40 NOTE frontend: CIMA frontend ready 2009-May-18 19:45:41 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2009-May-18 19:45:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:45:41 LOG4 got_cormsg: From DATATAKING: setup 2009-May-18 19:45:48 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2009-May-18 19:45:48 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2009-May-18 19:45:48 LOG4 got_cormsg: From DATATAKING: vw% io 2009-May-18 19:45:48 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-May-18 19:45:48 LOG4 got_cormsg: From DATATAKING: 2009-May-18 19:45:48 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2009-May-18 19:45:48 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-May-18 19:45:48 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-May-18 19:45:48 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-May-18 19:45:48 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-May-18 19:45:48 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-May-18 19:45:48 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-May-18 19:45:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-May-18 19:45:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-May-18 19:45:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-May-18 19:45:49 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-May-18 19:45:49 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-May-18 19:45:49 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2009-May-18 19:45:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:45:49 LOG4 got_cormsg: From DATATAKING: 2009-May-18 19:45:49 LOG4 got_cormsg: From DATATAKING: 2009-May-18 19:45:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:46:36 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-May-18 19:46:36 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-May-18 19:46:36 LOG5 restart_wapp: Calling 'restart_wapp' 2009-May-18 19:46:36 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-May-18 19:46:36 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-May-18 19:46:36 NOTE restart_wapp: Restarting all WAPPs 2009-May-18 19:46:36 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-May-18 19:46:36 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-May-18 19:46:36 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-May-18 19:46:36 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-May-18 19:46:40 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-May-18 19:46:40 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-May-18 19:46:40 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-May-18 19:46:40 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-May-18 19:50:31 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-May-18 19:50:31 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-May-18 19:50:31 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-May-18 19:50:31 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-May-18 19:50:31 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-May-18 19:50:31 NOTE select_receiver: Starting to select receiver ALFA 2009-May-18 19:50:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-May-18 19:50:31 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2009-May-18 19:50:31 LOG3 vw_send: To DATATAKING: acvlbical off 2009-May-18 19:50:31 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-May-18 19:50:31 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-May-18 19:50:31 LOG5 finish_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-May-18 19:50:31 DONE finish_task: DONE finished selecting: receiver ALFA 2009-May-18 19:50:31 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-18 19:50:31 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-May-18 19:50:31 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-May-18 19:50:31 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2009-May-18 19:50:31 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-May-18 19:50:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:50:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:13 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc.cmd ' to executive ... 2009-May-18 19:51:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_ages.conf} 2009-May-18 19:51:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2009-May-18 19:51:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2009-May-18 19:51:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2009-May-18 19:51:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2009-May-18 19:51:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2009-May-18 19:51:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2009-May-18 19:51:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2009-May-18 19:51:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2009-May-18 19:51:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2009-May-18 19:51:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2009-May-18 19:51:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2009-May-18 19:51:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2009-May-18 19:51:13 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-May-18 19:51:13 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 13 2009-May-18 19:51:13 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 13' 2009-May-18 19:51:13 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2009-May-18 19:51:13 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-May-18 19:51:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2009-May-18 19:51:13 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2009-May-18 19:51:13 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2009-May-18 19:51:13 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-May-18 19:51:13 NOTE CIMA-check_config_file: File 'togs_ages.conf' contains a observing mode set-up which will be ignored! 2009-May-18 19:51:13 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-18 19:51:13 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-May-18 19:51:13 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-May-18 19:51:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-May-18 19:51:15 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-18 19:51:15 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-May-18 19:51:15 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-May-18 19:51:15 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-May-18 19:51:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-May-18 19:51:15 INFO1 config_iflo: Selecting receiver ALFA 2009-May-18 19:51:15 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-May-18 19:51:15 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-May-18 19:51:15 START begin_task: Starting task 'selecting receiver ALFA' 2009-May-18 19:51:15 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-May-18 19:51:15 NOTE select_receiver: Starting to select receiver ALFA 2009-May-18 19:51:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-May-18 19:51:16 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2009-May-18 19:51:16 LOG3 vw_send: To DATATAKING: acvlbical off 2009-May-18 19:51:16 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-May-18 19:51:16 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-May-18 19:51:16 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-May-18 19:51:16 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-May-18 19:51:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 19:51:16 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-May-18 19:51:16 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-May-18 19:51:16 START begin_task: Starting task 'waiting for receiver ALFA' 2009-May-18 19:51:16 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-May-18 19:51:16 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-May-18 19:51:16 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-May-18 19:51:16 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-May-18 19:51:16 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-May-18 19:51:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 19:51:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-18 19:51:16 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 19:51:16 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-May-18 19:51:16 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 19:51:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 19:51:16 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-May-18 19:51:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 19:51:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-18 19:51:16 LOG3 vw_send: To DATATAKING: alfafb 1 2009-May-18 19:51:16 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-May-18 19:51:16 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-May-18 19:51:16 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-May-18 19:51:16 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-May-18 19:51:16 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-May-18 19:51:16 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-May-18 19:51:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2009-May-18 19:51:16 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-May-18 19:51:16 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-May-18 19:51:16 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-May-18 19:51:16 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-May-18 19:51:16 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-May-18 19:51:16 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-May-18 19:51:16 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-May-18 19:51:16 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-May-18 19:51:16 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-May-18 19:51:16 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-May-18 19:51:16 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-May-18 19:51:16 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-May-18 19:51:16 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-May-18 19:51:16 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-May-18 19:51:16 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-May-18 19:51:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 19:51:16 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-May-18 19:51:16 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-May-18 19:51:16 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-May-18 19:51:16 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-May-18 19:51:16 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-May-18 19:51:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-May-18 19:51:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 19:51:16 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-May-18 19:51:16 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-May-18 19:51:16 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2009-May-18 19:51:16 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-May-18 19:51:16 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-May-18 19:51:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-May-18 19:51:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-May-18 19:51:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-May-18 19:51:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-May-18 19:51:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2009-May-18 19:51:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-May-18 19:51:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-May-18 19:51:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-May-18 19:51:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-May-18 19:51:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-May-18 19:51:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-May-18 19:51:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-May-18 19:51:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-May-18 19:51:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-May-18 19:51:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 19:51:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-May-18 19:51:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-May-18 19:51:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-May-18 19:51:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-May-18 19:51:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 19:51:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:33 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 19:51:33 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-May-18 19:51:33 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-May-18 19:51:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-May-18 19:51:33 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-May-18 19:51:33 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-May-18 19:51:33 DONE finish_task: DONE finished configuration: IF/LO path 2009-May-18 19:51:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-18 19:51:33 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-May-18 19:51:33 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-May-18 19:51:33 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-May-18 19:51:33 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-May-18 19:51:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-May-18 19:51:33 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-May-18 19:51:33 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-May-18 19:51:33 START begin_task: Starting task 'selecting calibration port' 2009-May-18 19:51:33 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-May-18 19:51:33 LOG3 vw_send: To DATATAKING: calport 3 2009-May-18 19:51:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-May-18 19:51:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 19:51:33 START begin_task: Starting task 'waiting on calport' 2009-May-18 19:51:33 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-May-18 19:51:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:33 LOG4 got_cormsg: From DATATAKING: calport 3 2009-May-18 19:51:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 19:51:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:33 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 19:51:33 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-May-18 19:51:33 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-May-18 19:51:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-May-18 19:51:33 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-May-18 19:51:33 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-May-18 19:51:33 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-18 19:51:33 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-18 19:51:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-18 19:51:33 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-May-18 19:51:33 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-18 19:51:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-18 19:51:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-18 19:51:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-18 19:51:33 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-May-18 19:51:33 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-May-18 19:51:33 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-May-18 19:51:33 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-May-18 19:51:33 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-May-18 19:51:33 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-May-18 19:51:33 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-May-18 19:51:33 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-May-18 19:51:33 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-May-18 19:51:33 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-May-18 19:51:33 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-May-18 19:51:33 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-May-18 19:51:33 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-May-18 19:51:33 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-May-18 19:51:33 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-May-18 19:51:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-18 19:51:33 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-May-18 19:51:34 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-18 19:51:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-18 19:51:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-18 19:51:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-18 19:51:34 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-May-18 19:51:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-May-18 19:51:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-May-18 19:51:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-May-18 19:51:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-May-18 19:51:34 STOP finish_task: Finishing task 'configuring WAPPs' 2009-May-18 19:51:34 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-May-18 19:51:34 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-May-18 19:51:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-18 19:51:34 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-May-18 19:51:34 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-May-18 19:51:34 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2009-May-18 19:51:34 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2009-May-18 19:51:34 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2009-May-18 19:51:34 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2009-May-18 19:51:34 INFO5 is_if_valid: Condition parsed as: 1 2009-May-18 19:51:34 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2009-May-18 19:51:34 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2009-May-18 19:51:34 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-May-18 19:51:34 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-May-18 19:51:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-May-18 19:51:34 LOG3 track_source: Calling 'track_source galfasrc 115900.0 +080000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2009-May-18 19:51:34 START begin_task: Starting task 'sending tracking commands' 2009-May-18 19:51:34 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-May-18 19:51:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-May-18 19:51:34 INFO1 track_source: Starting to track galfasrc 2009-May-18 19:51:34 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-May-18 19:51:34 LOG3 vw_send: To DATATAKING: set ra 115900.0 2009-May-18 19:51:34 LOG3 vw_send: To DATATAKING: set dec +080000 2009-May-18 19:51:34 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-18 19:51:34 LOG3 vw_send: To DATATAKING: pnt tr 115900.0 +080000 -CJ 2009-May-18 19:51:34 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-May-18 19:51:34 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-18 19:51:34 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-May-18 19:51:34 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-18 19:51:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 19:51:34 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-18 19:51:34 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-May-18 19:51:34 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-May-18 19:51:34 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-May-18 19:51:34 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-May-18 19:51:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-18 19:51:34 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-May-18 19:51:34 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-May-18 19:51:35 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2009-May-18 19:51:35 INFO1 run_command_line: Skipping line 'ELSEIF isup(galfasrc2) then' since an earlier condition already has been true 2009-May-18 19:51:35 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2009-May-18 19:51:35 INFO1 run_command_line: Skipping line 'GOTO galfasrc2' in non-true conditional branch 2009-May-18 19:51:35 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2009-May-18 19:51:35 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2009-May-18 19:51:35 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2009-May-18 19:51:35 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2009-May-18 19:51:35 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2009-May-18 19:51:35 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2009-May-18 19:51:35 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2009-May-18 19:51:35 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2009-May-18 19:51:35 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-May-18 19:51:35 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-May-18 19:51:35 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-May-18 19:51:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-May-18 19:51:35 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-May-18 19:51:35 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-May-18 19:51:35 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-May-18 19:51:35 START begin_task: Starting task 'waiting on ALFA rotation' 2009-May-18 19:51:35 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-May-18 19:51:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-May-18 19:51:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20090518.a2048.0000.fits 2009-May-18 19:51:35 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-May-18 19:51:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-May-18 19:51:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-May-18 19:51:35 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090518.a2048.0000.fits} 2009-May-18 19:51:35 LOG4 got_cormsg: From DATATAKING: set ra 115900.0 2009-May-18 19:51:35 LOG4 got_cormsg: From DATATAKING: set dec +080000 2009-May-18 19:51:35 LOG4 got_cormsg: From DATATAKING: vw% 115900.0 2009-May-18 19:51:35 LOG4 got_cormsg: From DATATAKING: vw% +080000 2009-May-18 19:51:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:35 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-18 19:51:35 LOG4 got_cormsg: From DATATAKING: pnt tr 115900.0 +080000 -CJ 2009-May-18 19:51:35 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-May-18 19:51:35 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-18 19:51:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:51:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-May-18 19:52:07 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-May-18 19:52:07 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-May-18 19:52:07 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-May-18 19:52:07 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-May-18 19:52:07 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-18 19:52:07 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-May-18 19:52:07 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-May-18 19:52:07 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-May-18 19:52:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-18 19:52:07 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-May-18 19:52:07 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-May-18 19:52:07 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2009-May-18 19:52:07 BEGIN begin_task: Starting task 'waiting on telescope' 2009-May-18 19:52:07 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-May-18 19:52:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-18 19:52:07 LOG3 waittrk: Start waittrk 5 2009-May-18 19:52:07 START begin_task: Starting task 'waiting on telescope movement' 2009-May-18 19:52:07 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-May-18 19:52:12 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-18 19:52:12 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-May-18 19:52:12 START begin_task: Starting task 'waiting on telescope on source' 2009-May-18 19:52:12 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-May-18 19:53:11 COMMAND CIMA-send_to_exec: Sending command to abort observation 2009-May-18 19:53:11 LOG4 exec_msg: From OBSERVER: abort_task abort 2009-May-18 19:53:11 WARNING abort_task: WARNING abort requested! 2009-May-18 19:53:11 WARNING abort_task: WARNING Aborting wait for waiting on telescope on source 2009-May-18 19:53:11 STOP end_task: Finishing task 'waiting on telescope on source' with status 'ABORT' 2009-May-18 19:53:11 LOG5 end_task: Level: (3) ID = <10020> Status = 1 0 0 0 abort 2009-May-18 19:53:11 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-18 19:53:12 LOG4 waittrk: Current telescope position: Az = 268.61 ZA = 15.30 2009-May-18 19:53:12 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-18 19:53:12 LOG5 finish_task: Level: (2) ID = <10018> Status = 1 0 0 0 abort 2009-May-18 19:53:12 WARNING finish_task: WARNING aborted waiting: telescope on source 2009-May-18 19:53:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2009-May-18 19:53:12 END end_task: Finishing task 'waiting on telescope' with status 'ABORT' 2009-May-18 19:53:12 LOG5 end_task: Level: (2) ID = <10018> Status = 1 0 0 0 abort 2009-May-18 19:53:12 ALERT run_command_file: Stopping command file processing at line 16! 2009-May-18 19:53:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-May-18 19:53:12 STOP finish_task: Finishing task 'running command file 'command_galfasrc.cmd'' 2009-May-18 19:53:12 LOG5 finish_task: Level: (1) ID = <10003> Status = 1 0 0 0 abort 2009-May-18 19:53:12 WARNING finish_task: WARNING aborted running: command file 'command_galfasrc.cmd' 2009-May-18 19:53:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2009-May-18 19:53:12 END end_task: Finishing task 'running command file 'command_galfasrc.cmd'' with status 'ABORT' 2009-May-18 19:53:12 LOG5 end_task: Level: (1) ID = <10003> Status = 1 0 0 0 abort 2009-May-18 19:53:52 INFO1 CIMA-run_command_file: Transferring command file '090518.cmd ' to executive ... 2009-May-18 19:53:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2009-May-18 19:53:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2009-May-18 19:53:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 5 {CATALOG AGESFull.cat} 2009-May-18 19:53:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF LSTSLEW(AGESVC1A_p1_035) < 112230 THEN} 2009-May-18 19:53:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {FIXEDDRIFT az=310.39 alfaangle=61.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p1_035 ra=120900.00 dec=80900.00} 2009-May-18 19:53:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {ENDIF} 2009-May-18 19:53:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 15 {IF LSTSLEW(AGESVC1B_p3_068) < 114429 THEN} 2009-May-18 19:53:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 16 {FIXEDDRIFT az=313.90 alfaangle=58.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_068 ra=122900.00 dec=71930.00} 2009-May-18 19:53:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 19 {ENDIF} 2009-May-18 19:53:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 22 {IF LSTSLEW(AGESVC1B_p3_070) < 120729 THEN} 2009-May-18 19:53:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 23 {FIXEDDRIFT az=333.61 alfaangle=41.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_070 ra=122900.00 dec=71630.00} 2009-May-18 19:53:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 26 {ENDIF} 2009-May-18 19:53:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 29 {IF LSTSLEW(AGESVC1B_p3_072) < 123029 THEN} 2009-May-18 19:53:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 30 {FIXEDDRIFT az=1.28 alfaangle=18.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_072 ra=122900.00 dec=71330.00} 2009-May-18 19:53:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 33 {ENDIF} 2009-May-18 19:53:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 36 {IF LSTSLEW(AGESVC1B_p3_074) < 125329 THEN} 2009-May-18 19:53:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 37 {FIXEDDRIFT az=28.24 alfaangle=-4.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_074 ra=122900.00 dec=71030.00} 2009-May-18 19:53:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 40 {ENDIF} 2009-May-18 19:53:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 43 {IF LSTSLEW(AGESVC1B_p3_076) < 131629 THEN} 2009-May-18 19:53:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 44 {FIXEDDRIFT az=46.90 alfaangle=-20.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_076 ra=122900.00 dec=70730.00} 2009-May-18 19:53:53 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 47 {ENDIF} 2009-May-18 19:53:53 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-May-18 19:53:53 LOG4 exec_msg: From OBSERVER: run_command_file 090518.cmd 1 1 21 2009-May-18 19:53:53 LOG4 run_command_file: Calling 'run_command_file 090518.cmd 1 1 21' 2009-May-18 19:53:53 BEGIN begin_task: Starting task 'running command file '090518.cmd'' 2009-May-18 19:53:53 LOG5 begin_task: Level: (1) ID = <10021> Status = 0 0 0 0 ok 2009-May-18 19:53:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '090518.cmd' ...} 2009-May-18 19:53:53 NOTE run_command_file: Starting execution of command file '090518.cmd' from line 1 2009-May-18 19:53:53 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2009-May-18 19:53:53 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-May-18 19:53:53 NOTE CIMA-check_config_file: File 'ages_config.conf' contains an ALFA set-up which will be ignored! 2009-May-18 19:53:53 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-18 19:53:53 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-May-18 19:53:53 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-May-18 19:53:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-May-18 19:53:55 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-18 19:53:55 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-May-18 19:53:55 LOG5 begin_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2009-May-18 19:53:55 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-May-18 19:53:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-May-18 19:53:55 LOG1 config_iflo: Receiver ALFA already selected 2009-May-18 19:53:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 19:53:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-18 19:53:55 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 19:53:55 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2009-May-18 19:53:55 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 19:53:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 19:53:55 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2009-May-18 19:53:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 19:53:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-18 19:53:55 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-May-18 19:53:55 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-May-18 19:53:55 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-May-18 19:53:55 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-May-18 19:53:55 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-May-18 19:53:56 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-May-18 19:53:56 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-May-18 19:53:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2009-May-18 19:53:56 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-May-18 19:53:56 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-May-18 19:53:56 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-May-18 19:53:56 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-May-18 19:53:56 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-May-18 19:53:56 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-May-18 19:53:56 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-May-18 19:53:56 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-May-18 19:53:56 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-May-18 19:53:56 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-May-18 19:53:56 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-May-18 19:53:56 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2009-May-18 19:53:56 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-May-18 19:53:56 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-May-18 19:53:56 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-May-18 19:53:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 19:53:56 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-May-18 19:53:56 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-May-18 19:53:56 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-May-18 19:53:56 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-May-18 19:53:56 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-May-18 19:53:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-May-18 19:53:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 19:53:56 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-May-18 19:53:56 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2009-May-18 19:53:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2009-May-18 19:53:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 19:53:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 19:53:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:53:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:53:56 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 19:53:56 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-May-18 19:53:56 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2009-May-18 19:53:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-May-18 19:53:56 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-May-18 19:53:56 LOG5 finish_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2009-May-18 19:53:56 DONE finish_task: DONE finished configuration: IF/LO path 2009-May-18 19:53:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-18 19:53:56 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-May-18 19:53:56 LOG5 end_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2009-May-18 19:53:56 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-May-18 19:53:56 LOG5 begin_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2009-May-18 19:53:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-May-18 19:53:56 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-May-18 19:53:56 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-May-18 19:53:56 START begin_task: Starting task 'selecting calibration port' 2009-May-18 19:53:56 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-May-18 19:53:56 LOG3 vw_send: To DATATAKING: calport 3 2009-May-18 19:53:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-May-18 19:53:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 19:53:56 START begin_task: Starting task 'waiting on calport' 2009-May-18 19:53:56 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2009-May-18 19:53:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:53:56 LOG4 got_cormsg: From DATATAKING: calport 3 2009-May-18 19:53:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 19:53:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:53:56 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 19:53:56 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-May-18 19:53:56 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2009-May-18 19:53:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-May-18 19:53:56 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-May-18 19:53:56 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-May-18 19:53:56 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-18 19:53:56 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-18 19:53:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-18 19:53:56 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2009-May-18 19:53:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:53:57 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-18 19:53:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-18 19:53:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-18 19:53:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-18 19:53:57 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2009-May-18 19:53:57 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-May-18 19:53:57 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-May-18 19:53:57 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-May-18 19:53:57 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-May-18 19:53:57 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-May-18 19:53:57 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-May-18 19:53:57 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-May-18 19:53:57 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-May-18 19:53:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-May-18 19:53:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-May-18 19:53:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-May-18 19:53:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-May-18 19:53:57 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-May-18 19:53:57 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-May-18 19:53:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-18 19:53:57 LOG5 begin_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2009-May-18 19:53:57 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-18 19:53:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-18 19:53:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-18 19:53:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-18 19:53:57 LOG5 end_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2009-May-18 19:53:57 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-May-18 19:53:57 STOP finish_task: Finishing task 'configuring WAPPs' 2009-May-18 19:53:57 LOG5 finish_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2009-May-18 19:53:57 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-May-18 19:53:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-18 19:53:57 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-May-18 19:53:57 LOG5 end_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2009-May-18 19:53:57 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2009-May-18 19:53:57 COMMAND run_command_line: EXECUTING command 5: 'CATALOG AGESFull.cat' 2009-May-18 19:53:57 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2009-May-18 19:53:57 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGESVC1A_p1_035) < 112230 THEN' 2009-May-18 19:53:58 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1A_p1_035) < 112230 2009-May-18 19:53:58 INFO5 is_if_valid: Condition parsed as: 11.246532666666667 < 11.375 2009-May-18 19:53:58 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=310.39 alfaangle=61.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p1_035 ra=120900.00 dec=80900.00' 2009-May-18 19:53:58 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-May-18 19:53:58 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-May-18 19:53:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-May-18 19:53:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-May-18 19:53:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-May-18 19:53:58 WARNING check_obsmode: WARNING failed to get a response from the CIMA frontend when checking options for 'fixed azimuth drift map'! 2009-May-18 19:53:58 NOTE check_obsmode: Assuming that the options are OK 2009-May-18 19:53:58 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 310.39 61.6 hcorcal 5 tracking no first 1 AGESVC1A_p1_035 120900.00 80900.00 J 8500.0 Heliocentric velocity(optical)' 2009-May-18 19:53:58 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-May-18 19:53:58 LOG5 begin_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2009-May-18 19:53:58 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2009-May-18 19:53:58 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-May-18 19:53:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p1_035} 2009-May-18 19:53:58 INFO3 fixed_driftmap: Sending telescope to Az = 310.39 and ZA = 15.35 2009-May-18 19:53:58 LOG3 track_source: Calling 'track_source AGESVC1A_p1_035 310.39 15.3513798617 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-18 19:53:58 START begin_task: Starting task 'sending tracking commands' 2009-May-18 19:53:58 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-May-18 19:53:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p1_035} INFO {Slewing to source 'AGESVC1A_p1_035' ...} 2009-May-18 19:53:59 INFO1 track_source: Starting to track AGESVC1A_p1_035 2009-May-18 19:53:59 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p1_035" 2009-May-18 19:53:59 LOG3 vw_send: To DATATAKING: set ra 310.39 2009-May-18 19:53:59 LOG3 vw_send: To DATATAKING: set dec 15.3513798617 2009-May-18 19:53:59 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-18 19:53:59 LOG3 vw_send: To DATATAKING: pnt tr 310.39 15.3513798617 -CF 2009-May-18 19:53:59 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-18 19:53:59 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-18 19:53:59 LOG5 finish_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-May-18 19:53:59 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-18 19:53:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 19:53:59 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-18 19:53:59 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-May-18 19:53:59 START begin_task: Starting task 'rotate ALFA to +61.6 degrees' 2009-May-18 19:53:59 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2009-May-18 19:53:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +61.6 degrees ...} 2009-May-18 19:53:59 INFO2 rotate_alfa: ALFA commanded to +61.6 degrees 2009-May-18 19:54:02 LOG3 sock_errsend: To ALFAMOTOR: POSITION 61.6 REPLY 2009-May-18 19:54:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-May-18 19:54:02 START begin_task: Starting task 'waiting on ALFA rotation' 2009-May-18 19:54:02 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2009-May-18 19:54:02 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p1_035" 2009-May-18 19:54:02 LOG4 got_cormsg: From DATATAKING: set ra 310.39 2009-May-18 19:54:02 LOG4 got_cormsg: From DATATAKING: set dec 15.3513798617 2009-May-18 19:54:02 LOG4 got_cormsg: From DATATAKING: vw% 310.39 2009-May-18 19:54:02 LOG4 got_cormsg: From DATATAKING: vw% 15.3513798617 2009-May-18 19:54:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:54:02 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-18 19:54:02 LOG4 got_cormsg: From DATATAKING: pnt tr 310.39 15.3513798617 -CF 2009-May-18 19:54:02 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-18 19:54:02 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-18 19:54:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:54:03 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-18 19:54:27 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-May-18 19:54:27 INFO3 alfa_motor: ALFA rotator in-position +61.60 degrees 2009-May-18 19:54:27 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-May-18 19:54:27 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2009-May-18 19:54:27 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-18 19:54:27 STOP finish_task: Finishing task 'rotate ALFA to +61.6 degrees' 2009-May-18 19:54:27 LOG5 finish_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2009-May-18 19:54:27 INFO2 finish_task: DONE finished configuration: rotating ALFA to +61.6 degrees 2009-May-18 19:54:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 19:54:27 STOP end_task: Finishing task 'rotate ALFA to +61.6 degrees' with status 'OK' 2009-May-18 19:54:27 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2009-May-18 19:54:27 START begin_task: Starting task 'waiting on telescope' 2009-May-18 19:54:27 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2009-May-18 19:54:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-18 19:54:27 LOG3 waittrk: Start waittrk 5 2009-May-18 19:54:27 START begin_task: Starting task 'waiting on telescope movement' 2009-May-18 19:54:27 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2009-May-18 19:54:32 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-18 19:54:32 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2009-May-18 19:54:32 START begin_task: Starting task 'waiting on telescope on source' 2009-May-18 19:54:32 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-May-18 19:55:04 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-18 19:55:04 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-May-18 19:55:04 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-18 19:55:04 INFO2 waittrk: Now tracking AGESVC1A_p1_035 2009-May-18 19:55:04 LOG4 waittrk: Current telescope position: Az = 310.01 ZA = 15.35 2009-May-18 19:55:04 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-18 19:55:04 LOG5 finish_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2009-May-18 19:55:04 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-18 19:55:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 19:55:04 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-18 19:55:04 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2009-May-18 19:55:04 START begin_task: Starting task 'selecting calibration type' 2009-May-18 19:55:04 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-May-18 19:55:04 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-18 19:55:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-18 19:55:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 19:55:04 START begin_task: Starting task 'waiting on setcal' 2009-May-18 19:55:04 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-May-18 19:55:04 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-18 19:55:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 19:55:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:55:04 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 19:55:04 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-18 19:55:04 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-May-18 19:55:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-18 19:55:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 19:55:04 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-18 19:55:04 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 19:55:04 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2009-May-18 19:55:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 19:55:04 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 19:55:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 19:55:04 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2009-May-18 19:55:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 19:55:04 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-18 19:55:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 19:55:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-18 19:55:04 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 19:55:04 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-May-18 19:55:04 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 19:55:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 19:55:04 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-May-18 19:55:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 19:55:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-18 19:55:04 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-18 19:55:04 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-May-18 19:55:04 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-May-18 19:55:04 INFO2 astwait: Waiting for 375 seconds from 23:55:04 to 00:01:19 UTC ... 2009-May-18 19:55:04 LOG4 send_obs_status: To obs_status: <1> TASKTIME 375 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-18 19:55:04 START begin_task: Starting task 'waiting on waiting for AST time' 2009-May-18 19:55:04 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-May-18 19:58:08 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 19:58:08.303 (seconds: 71888.303)!} 2009-May-18 19:58:08 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 19:58:08.303 (seconds: 71888.303)! 2009-May-18 20:01:19 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-May-18 20:01:19 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-May-18 20:01:19 INFO3 astwait: Finished waiting 2009-May-18 20:01:19 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-18 20:01:19 LOG5 dopset_later: Calling 'dopset_later 61.061974875296691' 2009-May-18 20:01:19 INFO3 dopset_later: Setting Doppler correction for 20:02:19 (61.1 seconds from now) 2009-May-18 20:01:19 LOG5 antvel: Calling 'antvel 310.390000 15.351380 F 61.061974875296691' 2009-May-18 20:01:19 LOG2 antvel: Transforming current Az = 310.39 ZA = 15.35 to apparent RA = 12:09:30.2 Dec = +08:05:44.9 2009-May-18 20:01:19 LOG2 antvel: Parameters to Doppler: Heliocentric 86539 2009 138 0.0 2009-May-18 20:01:19 INFO5 antvel: Computed antenna velocity: +24.75386 km/s 2009-May-18 20:01:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=24.753862897099999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-May-18 20:01:19 INFO4 dopset_gen: New sky frequencies: 1381.129389 1381.129389 1381.129389 1381.129389 1381.129389 1381.129389 1381.129389 1381.129389 1381.129389 2009-May-18 20:01:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.129389 sky0=1381.129389 sky1=1381.129389 sky2=1381.129389 sky3=1381.129389 sky4=1381.129389 sky5=1381.129389 sky6=1381.129389 sky7=1381.129389 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 20:01:19 LOG2 dopset_gen: Result from 'sky2syn': 1631.129389 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 20:01:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631129389.0} 2009-May-18 20:01:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 20:01:19 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-May-18 20:01:19 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-May-18 20:01:19 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.3 Dec = +08:08:52.8 2009-May-18 20:01:19 LOG3 track_source: Calling 'track_source AGESVC1A_p1_035 120803.3 080852.8 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-18 20:01:19 START begin_task: Starting task 'sending tracking commands' 2009-May-18 20:01:19 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2009-May-18 20:01:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p1_035} INFO {Slewing to source 'AGESVC1A_p1_035' ...} 2009-May-18 20:01:19 INFO1 track_source: Starting to track AGESVC1A_p1_035 2009-May-18 20:01:19 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p1_035" 2009-May-18 20:01:19 LOG3 vw_send: To DATATAKING: set ra 120803.3 2009-May-18 20:01:19 LOG3 vw_send: To DATATAKING: set dec 080852.8 2009-May-18 20:01:19 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-18 20:01:19 LOG3 vw_send: To DATATAKING: pnt tr 120803.3 080852.8 -CJ 2009-May-18 20:01:19 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-18 20:01:19 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-18 20:01:19 LOG5 finish_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2009-May-18 20:01:19 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-18 20:01:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 20:01:19 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-18 20:01:19 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2009-May-18 20:01:19 START begin_task: Starting task 'waiting on telescope' 2009-May-18 20:01:19 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-May-18 20:01:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-18 20:01:19 LOG3 waittrk: Start waittrk 5 2009-May-18 20:01:19 START begin_task: Starting task 'waiting on telescope movement' 2009-May-18 20:01:19 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-May-18 20:01:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631129389.0} 2009-May-18 20:01:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 20:01:19 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p1_035" 2009-May-18 20:01:19 LOG4 got_cormsg: From DATATAKING: set ra 120803.3 2009-May-18 20:01:19 LOG4 got_cormsg: From DATATAKING: set dec 080852.8 2009-May-18 20:01:19 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-18 20:01:19 LOG4 got_cormsg: From DATATAKING: vw% 120803.3 2009-May-18 20:01:19 LOG4 got_cormsg: From DATATAKING: vw% 080852.8 2009-May-18 20:01:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:01:19 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-18 20:01:19 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.3 080852.8 -CJ 2009-May-18 20:01:19 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-18 20:01:19 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-18 20:01:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:01:24 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-18 20:01:24 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-May-18 20:01:24 START begin_task: Starting task 'waiting on telescope on source' 2009-May-18 20:01:24 LOG5 begin_task: Level: (4) ID = <10045> Status = 0 0 0 0 ok 2009-May-18 20:01:26 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-18 20:01:26 LOG5 end_task: Level: (4) ID = <10045> Status = 0 0 0 0 ok 2009-May-18 20:01:26 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-18 20:01:26 INFO2 waittrk: Now tracking AGESVC1A_p1_035 2009-May-18 20:01:26 LOG4 waittrk: Current telescope position: Az = 310.07 ZA = 15.34 2009-May-18 20:01:26 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-18 20:01:26 LOG5 finish_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-May-18 20:01:26 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-18 20:01:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 20:01:26 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-18 20:01:26 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-May-18 20:01:26 START begin_task: Starting task 'adjusting WAPP power' 2009-May-18 20:01:26 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-May-18 20:01:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-May-18 20:01:26 INFO2 adjust_power: Starting to adjust WAPP power 2009-May-18 20:01:26 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-May-18 20:01:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-May-18 20:01:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 20:01:26 START begin_task: Starting task 'waiting on adjpwrif2' 2009-May-18 20:01:26 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-May-18 20:01:27 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-May-18 20:01:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 20:01:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:01:30 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 20:01:30 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-May-18 20:01:30 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-May-18 20:01:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-May-18 20:01:30 START begin_task: Starting task 'adjusting WAPP power' 2009-May-18 20:01:30 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2009-May-18 20:01:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-May-18 20:01:30 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 20:01:30 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 20:01:30 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 20:01:30 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 20:01:30 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-May-18 20:01:30 LOG5 begin_task: Level: (5) ID = <10049> Status = 0 0 0 0 ok 2009-May-18 20:01:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:01:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-May-18 20:01:30 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 7 dB 2009-May-18 20:01:30 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 4 dB 2009-May-18 20:01:30 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 7 4 dB --- beam 3: 4 3 dB 2009-May-18 20:01:30 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-May-18 20:01:30 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-May-18 20:01:30 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-May-18 20:01:30 LOG5 end_task: Level: (5) ID = <10049> Status = 0 0 0 0 ok 2009-May-18 20:01:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.877 0.986 ALFA beam 1: 0.953 0.956 2009-May-18 20:01:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.897 1.086 ALFA beam 3: 0.969 0.947 2009-May-18 20:01:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.972 0.929 ALFA beam 5: 0.982 1.064 2009-May-18 20:01:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.974 0.106 ALFA beam 7: 1.073 0.131 2009-May-18 20:01:30 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-18 20:01:30 LOG5 finish_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2009-May-18 20:01:30 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-May-18 20:01:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 20:01:30 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-18 20:01:30 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2009-May-18 20:01:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-18 20:01:30 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-18 20:01:30 LOG5 finish_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-May-18 20:01:30 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-May-18 20:01:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 20:01:31 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-18 20:01:31 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-May-18 20:01:31 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-May-18 20:01:31 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-May-18 20:01:31 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-May-18 20:01:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-May-18 20:01:31 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090518.a2048.0000.fits' is empty! 2009-May-18 20:01:31 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-May-18 20:01:31 START begin_task: Starting task 'WAPP calibration' 2009-May-18 20:01:31 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-May-18 20:01:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-May-18 20:01:31 START begin_task: Starting task 'selecting calibration type' 2009-May-18 20:01:31 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-May-18 20:01:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-18 20:01:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-18 20:01:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 20:01:31 START begin_task: Starting task 'waiting on setcal' 2009-May-18 20:01:31 LOG5 begin_task: Level: (5) ID = <10052> Status = 0 0 0 0 ok 2009-May-18 20:01:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-May-18 20:01:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-18 20:01:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 20:01:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:01:31 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 20:01:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-18 20:01:31 LOG5 end_task: Level: (5) ID = <10052> Status = 0 0 0 0 ok 2009-May-18 20:01:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-18 20:01:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 20:01:31 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-18 20:01:31 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 20:01:31 LOG5 begin_task: Level: (5) ID = <10053> Status = 0 0 0 0 ok 2009-May-18 20:01:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:01:31 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 20:01:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 20:01:31 LOG5 end_task: Level: (5) ID = <10053> Status = 0 0 0 0 ok 2009-May-18 20:01:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 20:01:31 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-18 20:01:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 20:01:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-18 20:01:31 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 20:01:31 LOG5 begin_task: Level: (5) ID = <10054> Status = 0 0 0 0 ok 2009-May-18 20:01:31 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 20:01:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 20:01:31 LOG5 end_task: Level: (5) ID = <10054> Status = 0 0 0 0 ok 2009-May-18 20:01:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 20:01:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-18 20:01:31 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-18 20:01:31 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-May-18 20:01:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-May-18 20:01:31 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-May-18 20:01:31 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-May-18 20:01:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-18 20:01:31 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-May-18 20:01:31 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-18 20:01:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-May-18 20:01:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-18 20:01:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-18 20:01:31 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-May-18 20:01:31 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-May-18 20:01:31 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-May-18 20:01:31 START begin_task: Starting task 'WAPP spectral observation' 2009-May-18 20:01:31 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2009-May-18 20:01:31 LOG5 log_alfabeam: Parameters: 12.13425 8.1479999999999997 11.361601 2009.3801078345628 61.599953 2009-May-18 20:01:31 LOG4 log_alfabeam: ALFABEAM 0 12.134249999999996 8.148000000000005 2009-May-18 20:01:31 LOG4 log_alfabeam: ALFABEAM 1 12.131980632255569 8.244951358923549 2009-May-18 20:01:31 LOG4 log_alfabeam: ALFABEAM 2 12.127647685729722 8.180753932500338 2009-May-18 20:01:31 LOG4 log_alfabeam: ALFABEAM 3 12.129880115971467 8.083620015264696 2009-May-18 20:01:31 LOG4 log_alfabeam: ALFABEAM 4 12.136485541316617 8.050741710229390 2009-May-18 20:01:31 LOG4 log_alfabeam: ALFABEAM 5 12.140869288056136 8.115683303958940 2009-May-18 20:01:31 LOG4 log_alfabeam: ALFABEAM 6 12.138596777581126 8.212758853085944 2009-May-18 20:01:31 INFO2 take_data: Starting WAPP scan: 913800200 2009-May-18 20:01:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-May-18 20:01:32 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-18 20:01:32 LOG5 begin_task: Level: (5) ID = <10057> Status = 0 0 0 0 ok 2009-May-18 20:01:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 20:01:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 93.00 2009-May-18 20:01:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-May-18 20:01:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.877 0.986 0.953 0.956 2009-May-18 20:01:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.897 1.086 0.969 0.947 2009-May-18 20:01:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.972 0.929 0.982 1.064 2009-May-18 20:01:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.974 0.106 1.073 0.131 2009-May-18 20:01:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.129389 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 20:01:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.129389 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 20:01:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.129389 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 20:01:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.129389 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 20:01:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.129389 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 20:01:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.129389 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 20:01:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.129389 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 20:01:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.129389 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 20:01:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.129389 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 20:01:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 20:01:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-18 20:01:38 LOG5 end_task: Level: (5) ID = <10057> Status = 0 0 0 0 ok 2009-May-18 20:01:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-18 20:01:38 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2009-May-18 20:01:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-May-18 20:01:38 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-18 20:01:38 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-18 20:01:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-18 20:01:38 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2009-May-18 20:01:38 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-18 20:01:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-18 20:01:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-18 20:01:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-18 20:01:38 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2009-May-18 20:01:38 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-May-18 20:01:38 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-May-18 20:01:38 START begin_task: Starting task 'WAPP spectral observation' 2009-May-18 20:01:38 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-May-18 20:01:38 LOG5 log_alfabeam: Parameters: 12.13425 8.1479999999999997 11.363551 2009.3801080563794 61.599953 2009-May-18 20:01:38 LOG4 log_alfabeam: ALFABEAM 0 12.134249999999998 8.147999999999993 2009-May-18 20:01:38 LOG4 log_alfabeam: ALFABEAM 1 12.131988398854688 8.244991256082097 2009-May-18 20:01:38 LOG4 log_alfabeam: ALFABEAM 2 12.127650333515867 8.180871158263983 2009-May-18 20:01:38 LOG4 log_alfabeam: ALFABEAM 3 12.129874931032843 8.083697727428182 2009-May-18 20:01:38 LOG4 log_alfabeam: ALFABEAM 4 12.136477706252165 8.050701973023514 2009-May-18 20:01:38 LOG4 log_alfabeam: ALFABEAM 5 12.140866700038933 8.115566444379734 2009-May-18 20:01:38 LOG4 log_alfabeam: ALFABEAM 6 12.138601958371050 8.212682113814143 2009-May-18 20:01:38 INFO2 take_data: Starting WAPP scan: 913800201 2009-May-18 20:01:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-May-18 20:01:39 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-18 20:01:39 LOG5 begin_task: Level: (5) ID = <10060> Status = 0 0 0 0 ok 2009-May-18 20:01:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 20:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.522 (still bad) 2009-May-18 20:01:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 100.00 2009-May-18 20:01:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.129389 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 20:01:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.129389 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 20:01:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.129389 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 20:01:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.129389 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 20:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.478 (still bad) 2009-May-18 20:01:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.129389 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 20:01:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.129389 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 20:01:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.129389 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 20:01:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.129389 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 20:01:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.129389 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 20:01:45 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-May-18 20:01:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 20:01:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-18 20:01:45 LOG5 end_task: Level: (5) ID = <10060> Status = 0 0 0 0 ok 2009-May-18 20:01:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-18 20:01:45 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-May-18 20:01:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-18 20:01:45 STOP finish_task: Finishing task 'WAPP calibration' 2009-May-18 20:01:45 LOG5 finish_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-May-18 20:01:45 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-May-18 20:01:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 20:01:45 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-May-18 20:01:45 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-May-18 20:01:45 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-May-18 20:01:45 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 310.39 and ZA = 15.35 2009-May-18 20:01:45 LOG3 track_source: Calling 'track_source AGESVC1A_p1_035 310.39 15.3513798617 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-18 20:01:45 START begin_task: Starting task 'sending tracking commands' 2009-May-18 20:01:45 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-May-18 20:01:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p1_035} INFO {Slewing to source 'AGESVC1A_p1_035' ...} 2009-May-18 20:01:45 INFO1 track_source: Starting to track AGESVC1A_p1_035 2009-May-18 20:01:45 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p1_035" 2009-May-18 20:01:45 LOG3 vw_send: To DATATAKING: set ra 310.39 2009-May-18 20:01:45 LOG3 vw_send: To DATATAKING: set dec 15.3513798617 2009-May-18 20:01:45 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-18 20:01:45 LOG3 vw_send: To DATATAKING: pnt tr 310.39 15.3513798617 -CF 2009-May-18 20:01:45 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-18 20:01:46 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-18 20:01:46 LOG5 finish_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-May-18 20:01:46 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-18 20:01:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 20:01:46 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-18 20:01:46 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-May-18 20:01:46 LOG1 fixed_driftmap: Parameters: HA = -00:47:00.4 Start = 11:22:30.0 LST = 11:21:55.8 diff = 34.2 secs 2009-May-18 20:01:46 INFO2 fixed_driftmap: Waiting 32.2 seconds for RA 12:09:30 2009-May-18 20:01:46 INFO2 lstwait: Waiting for 32.1 secs from LST 11:21:56 to LST 11:22:28 ... 2009-May-18 20:01:46 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.065762893534391 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-18 20:01:46 START begin_task: Starting task 'waiting on wait on LST' 2009-May-18 20:01:46 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2009-May-18 20:01:46 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p1_035" 2009-May-18 20:01:46 LOG4 got_cormsg: From DATATAKING: set ra 310.39 2009-May-18 20:01:46 LOG4 got_cormsg: From DATATAKING: set dec 15.3513798617 2009-May-18 20:01:46 LOG4 got_cormsg: From DATATAKING: vw% 310.39 2009-May-18 20:01:46 LOG4 got_cormsg: From DATATAKING: vw% 15.3513798617 2009-May-18 20:01:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:01:46 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-18 20:01:46 LOG4 got_cormsg: From DATATAKING: pnt tr 310.39 15.3513798617 -CF 2009-May-18 20:01:46 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-18 20:01:46 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-18 20:01:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.087 (still bad) 2009-May-18 20:02:18 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-May-18 20:02:18 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2009-May-18 20:02:18 LOG4 lstwait: Finished waiting -0.07 seconds late 2009-May-18 20:02:18 INFO3 lstwait: Finished waiting 2009-May-18 20:02:18 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-18 20:02:18 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-May-18 20:02:18 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-May-18 20:02:18 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-May-18 20:02:18 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-May-18 20:02:18 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-May-18 20:02:18 START begin_task: Starting task 'WAPP spectral observation' 2009-May-18 20:02:18 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-May-18 20:02:18 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-May-18 20:02:18 INFO2 take_data: Starting WAPP scan: 913800202 2009-May-18 20:02:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-May-18 20:02:18 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-18 20:02:18 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-May-18 20:02:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 20:02:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 139.00 2009-May-18 20:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.129389 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 20:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.129389 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 20:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.129389 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 20:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.129389 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 20:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.129389 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 20:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.129389 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 20:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.129389 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 20:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.129389 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 20:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.129389 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 20:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.087 (still bad) 2009-May-18 20:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.091 (still bad) 2009-May-18 20:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.089 (still bad) 2009-May-18 20:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.090 (still bad) 2009-May-18 20:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad) 2009-May-18 20:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.090 (still bad) 2009-May-18 20:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.089 (still bad) 2009-May-18 20:02:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:02:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.893 0.991 0.955 0.959 2009-May-18 20:02:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 1.089 0.971 0.968 2009-May-18 20:02:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.990 0.955 0.943 1.030 2009-May-18 20:02:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.994 0.109 1.089 0.135 2009-May-18 20:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.088 (still bad) 2009-May-18 20:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.088 (still bad) 2009-May-18 20:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.087 (still bad) 2009-May-18 20:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.088 (still bad) 2009-May-18 20:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.091 (still bad) 2009-May-18 20:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.088 (still bad) 2009-May-18 20:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 20:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.090 (still bad) 2009-May-18 20:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.088 (still bad) 2009-May-18 20:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.089 (still bad) 2009-May-18 20:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.090 (still bad) 2009-May-18 20:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 20:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.092 (still bad) 2009-May-18 20:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.089 (still bad) 2009-May-18 20:03:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:03:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.894 0.991 0.957 0.958 2009-May-18 20:03:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 1.091 0.983 0.983 2009-May-18 20:03:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.991 0.952 0.944 1.029 2009-May-18 20:03:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.993 0.109 1.088 0.134 2009-May-18 20:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.089 (still bad) 2009-May-18 20:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.089 (still bad) 2009-May-18 20:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 20:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.088 (still bad) 2009-May-18 20:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.089 (still bad) 2009-May-18 20:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 20:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 20:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 20:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 20:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:04:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:04:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.892 0.988 0.956 0.960 2009-May-18 20:04:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.901 1.091 0.970 0.968 2009-May-18 20:04:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.991 0.957 0.947 1.030 2009-May-18 20:04:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.992 0.109 1.087 0.135 2009-May-18 20:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 20:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 20:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 20:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 20:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:05:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:05:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.893 0.985 0.954 0.957 2009-May-18 20:05:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 1.088 0.971 0.972 2009-May-18 20:05:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.985 0.950 0.943 1.032 2009-May-18 20:05:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.991 0.109 1.087 0.135 2009-May-18 20:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 20:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 20:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-18 20:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:06:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:06:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.889 0.988 0.952 0.958 2009-May-18 20:06:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 1.086 0.980 0.981 2009-May-18 20:06:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.984 0.951 0.941 1.028 2009-May-18 20:06:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.991 0.109 1.088 0.135 2009-May-18 20:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 20:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 20:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-18 20:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 20:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 20:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:07:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:07:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.886 0.981 0.952 0.958 2009-May-18 20:07:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.897 1.083 0.970 0.969 2009-May-18 20:07:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 0.949 0.939 1.030 2009-May-18 20:07:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.990 0.109 1.088 0.135 2009-May-18 20:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.084 (still bad) 2009-May-18 20:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.084 (still bad) 2009-May-18 20:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 20:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.084 (still bad) 2009-May-18 20:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.084 (still bad) 2009-May-18 20:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.084 (still bad) 2009-May-18 20:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.082 (still bad) 2009-May-18 20:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.084 (still bad) 2009-May-18 20:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.084 (still bad) 2009-May-18 20:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.084 (still bad) 2009-May-18 20:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:08:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:08:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.889 0.986 0.954 0.962 2009-May-18 20:08:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 1.081 0.969 0.966 2009-May-18 20:08:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.981 0.949 0.945 1.035 2009-May-18 20:08:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.993 0.109 1.092 0.135 2009-May-18 20:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 20:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:09:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:09:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.916 1.015 0.949 0.957 2009-May-18 20:09:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 1.079 0.969 0.967 2009-May-18 20:09:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.976 0.945 0.939 1.028 2009-May-18 20:09:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.995 0.109 1.091 0.134 2009-May-18 20:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 20:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 20:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 20:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad) 2009-May-18 20:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.085 (still bad) 2009-May-18 20:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.084 (still bad) 2009-May-18 20:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.085 (still bad) 2009-May-18 20:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.086 (still bad) 2009-May-18 20:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.084 (still bad) 2009-May-18 20:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.084 (still bad) 2009-May-18 20:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:10:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:10:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.883 0.978 0.947 0.953 2009-May-18 20:10:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.895 1.079 0.966 0.966 2009-May-18 20:10:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.976 0.943 0.938 1.024 2009-May-18 20:10:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.109 1.085 0.134 2009-May-18 20:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.084 (still bad) 2009-May-18 20:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.084 (still bad) 2009-May-18 20:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:11:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:11:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.884 0.981 0.946 0.952 2009-May-18 20:11:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 1.080 0.967 0.965 2009-May-18 20:11:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 0.945 0.943 1.030 2009-May-18 20:11:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 0.109 1.086 0.134 2009-May-18 20:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.084 (still bad) 2009-May-18 20:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:12:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:12:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.882 0.979 0.948 0.955 2009-May-18 20:12:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 1.081 0.965 0.965 2009-May-18 20:12:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.975 0.944 0.938 1.027 2009-May-18 20:12:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.109 1.085 0.134 2009-May-18 20:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 20:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 20:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:13:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:13:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.888 0.985 0.951 0.957 2009-May-18 20:13:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 1.085 0.977 0.978 2009-May-18 20:13:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.979 0.946 0.940 1.028 2009-May-18 20:13:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.992 0.109 1.088 0.134 2009-May-18 20:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad) 2009-May-18 20:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad) 2009-May-18 20:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 20:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 20:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.084 (still bad) 2009-May-18 20:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.083 (still bad) 2009-May-18 20:14:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:14:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.888 0.985 0.954 0.959 2009-May-18 20:14:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 1.086 0.972 0.972 2009-May-18 20:14:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.984 0.950 0.943 1.027 2009-May-18 20:14:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.109 1.085 0.134 2009-May-18 20:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.083 (still bad) 2009-May-18 20:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 20:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.084 (still bad) 2009-May-18 20:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 20:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 20:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad) 2009-May-18 20:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:15:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:15:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.894 0.994 0.952 0.957 2009-May-18 20:15:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 1.082 0.967 0.968 2009-May-18 20:15:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 0.946 0.952 1.043 2009-May-18 20:15:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 0.109 1.087 0.134 2009-May-18 20:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.085 (still bad) 2009-May-18 20:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 20:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 20:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 20:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 20:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 20:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:16:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:16:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.887 0.989 0.951 0.960 2009-May-18 20:16:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 1.086 0.969 0.970 2009-May-18 20:16:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.982 0.948 0.941 1.028 2009-May-18 20:16:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.991 0.109 1.088 0.134 2009-May-18 20:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 20:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 20:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 20:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 20:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 20:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.086 (still bad) 2009-May-18 20:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:17:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:17:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.894 0.991 0.956 0.963 2009-May-18 20:17:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.904 1.092 0.971 0.974 2009-May-18 20:17:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.985 0.952 0.944 1.032 2009-May-18 20:17:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.996 0.109 1.094 0.135 2009-May-18 20:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad) 2009-May-18 20:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 20:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad) 2009-May-18 20:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 20:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 20:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad) 2009-May-18 20:18:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:18:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.892 0.988 0.954 0.963 2009-May-18 20:18:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.901 1.090 0.970 0.971 2009-May-18 20:18:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.985 0.953 0.944 1.029 2009-May-18 20:18:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.995 0.109 1.093 0.134 2009-May-18 20:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 20:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 20:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 20:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 20:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 20:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 20:19:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:19:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.895 0.988 0.956 0.961 2009-May-18 20:19:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 1.092 0.973 0.975 2009-May-18 20:19:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.986 0.951 0.945 1.029 2009-May-18 20:19:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.996 0.109 1.092 0.135 2009-May-18 20:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 20:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 20:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 20:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 20:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad) 2009-May-18 20:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 20:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 20:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad) 2009-May-18 20:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 20:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 20:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 20:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 20:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 20:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:20:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:20:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.892 0.984 0.951 0.963 2009-May-18 20:20:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 1.090 0.968 0.972 2009-May-18 20:20:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.987 0.955 0.943 1.027 2009-May-18 20:20:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.995 0.109 1.092 0.135 2009-May-18 20:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 20:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 20:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad) 2009-May-18 20:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 20:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 20:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 20:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 20:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 20:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 20:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad) 2009-May-18 20:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 20:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 20:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 20:22:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:22:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.896 0.988 0.955 0.965 2009-May-18 20:22:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.901 1.088 0.968 0.973 2009-May-18 20:22:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.988 0.951 0.944 1.030 2009-May-18 20:22:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.998 0.109 1.094 0.135 2009-May-18 20:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 20:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 20:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 20:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 20:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 20:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 20:22:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 20:22:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-18 20:22:19 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-May-18 20:22:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-18 20:22:19 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-May-18 20:22:19 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-May-18 20:22:19 LOG5 finish_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2009-May-18 20:22:19 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-May-18 20:22:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-18 20:22:19 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-May-18 20:22:19 LOG5 end_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2009-May-18 20:22:19 COMMAND run_command_line: EXECUTING command 12: 'ENDIF' 2009-May-18 20:22:19 COMMAND run_command_line: EXECUTING command 15: 'IF LSTSLEW(AGESVC1B_p3_068) < 114429 THEN' 2009-May-18 20:22:20 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1B_p3_068) < 114429 2009-May-18 20:22:20 INFO5 is_if_valid: Condition parsed as: 11.712550333333335 < 11.741388888888888 2009-May-18 20:22:20 COMMAND run_command_line: EXECUTING command 16: 'FIXEDDRIFT az=313.90 alfaangle=58.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_068 ra=122900.00 dec=71930.00' 2009-May-18 20:22:20 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-May-18 20:22:20 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-18 20:22:20 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 313.90 58.3 hcorcal 5 tracking no first 1 AGESVC1B_p3_068 122900.00 71930.00 J 8500.0 Heliocentric velocity(optical)' 2009-May-18 20:22:20 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-May-18 20:22:20 LOG5 begin_task: Level: (2) ID = <10065> Status = 0 0 0 0 ok 2009-May-18 20:22:20 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p1_035' 2009-May-18 20:22:20 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-May-18 20:22:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p3_068} 2009-May-18 20:22:20 INFO3 fixed_driftmap: Sending telescope to Az = 313.90 and ZA = 15.58 2009-May-18 20:22:20 LOG3 track_source: Calling 'track_source AGESVC1B_p3_068 313.90 15.5791396668 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-18 20:22:20 START begin_task: Starting task 'sending tracking commands' 2009-May-18 20:22:20 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2009-May-18 20:22:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_068} INFO {Slewing to source 'AGESVC1B_p3_068' ...} 2009-May-18 20:22:20 INFO1 track_source: Starting to track AGESVC1B_p3_068 2009-May-18 20:22:20 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_068" 2009-May-18 20:22:20 LOG3 vw_send: To DATATAKING: set ra 313.90 2009-May-18 20:22:20 LOG3 vw_send: To DATATAKING: set dec 15.5791396668 2009-May-18 20:22:20 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-18 20:22:20 LOG3 vw_send: To DATATAKING: pnt tr 313.90 15.5791396668 -CF 2009-May-18 20:22:20 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-18 20:22:20 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-18 20:22:20 LOG5 finish_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2009-May-18 20:22:20 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-18 20:22:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 20:22:20 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-18 20:22:20 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2009-May-18 20:22:20 START begin_task: Starting task 'rotate ALFA to +58.3 degrees' 2009-May-18 20:22:20 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-May-18 20:22:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +58.3 degrees ...} 2009-May-18 20:22:20 INFO2 rotate_alfa: ALFA commanded to +58.3 degrees 2009-May-18 20:22:20 LOG3 sock_errsend: To ALFAMOTOR: POSITION 58.3 REPLY 2009-May-18 20:22:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-May-18 20:22:20 START begin_task: Starting task 'waiting on ALFA rotation' 2009-May-18 20:22:20 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-May-18 20:22:20 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_068" 2009-May-18 20:22:20 LOG4 got_cormsg: From DATATAKING: set ra 313.90 2009-May-18 20:22:20 LOG4 got_cormsg: From DATATAKING: set dec 15.5791396668 2009-May-18 20:22:20 LOG4 got_cormsg: From DATATAKING: vw% 313.90 2009-May-18 20:22:20 LOG4 got_cormsg: From DATATAKING: vw% 15.5791396668 2009-May-18 20:22:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:22:21 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-18 20:22:21 LOG4 got_cormsg: From DATATAKING: pnt tr 313.90 15.5791396668 -CF 2009-May-18 20:22:21 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-18 20:22:21 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-18 20:22:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 20:22:23 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-May-18 20:22:23 INFO3 alfa_motor: ALFA rotator in-position +58.30 degrees 2009-May-18 20:22:23 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-May-18 20:22:23 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-May-18 20:22:23 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-18 20:22:23 STOP finish_task: Finishing task 'rotate ALFA to +58.3 degrees' 2009-May-18 20:22:23 LOG5 finish_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-May-18 20:22:23 INFO2 finish_task: DONE finished configuration: rotating ALFA to +58.3 degrees 2009-May-18 20:22:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 20:22:24 STOP end_task: Finishing task 'rotate ALFA to +58.3 degrees' with status 'OK' 2009-May-18 20:22:24 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-May-18 20:22:24 START begin_task: Starting task 'waiting on telescope' 2009-May-18 20:22:24 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-May-18 20:22:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-18 20:22:24 LOG3 waittrk: Start waittrk 5 2009-May-18 20:22:24 START begin_task: Starting task 'waiting on telescope movement' 2009-May-18 20:22:24 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-May-18 20:22:29 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-18 20:22:29 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-May-18 20:22:29 START begin_task: Starting task 'waiting on telescope on source' 2009-May-18 20:22:29 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2009-May-18 20:22:47 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-18 20:22:47 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2009-May-18 20:22:47 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-18 20:22:47 INFO2 waittrk: Now tracking AGESVC1B_p3_068 2009-May-18 20:22:47 LOG4 waittrk: Current telescope position: Az = 313.52 ZA = 15.57 2009-May-18 20:22:47 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-18 20:22:47 LOG5 finish_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-May-18 20:22:47 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-18 20:22:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 20:22:47 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-18 20:22:47 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-May-18 20:22:47 START begin_task: Starting task 'selecting calibration type' 2009-May-18 20:22:47 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2009-May-18 20:22:47 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-18 20:22:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-18 20:22:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 20:22:47 START begin_task: Starting task 'waiting on setcal' 2009-May-18 20:22:47 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2009-May-18 20:22:47 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-18 20:22:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 20:22:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:22:49 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 20:22:49 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-18 20:22:49 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2009-May-18 20:22:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-18 20:22:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 20:22:49 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-18 20:22:49 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 20:22:49 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-May-18 20:22:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:22:49 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 20:22:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 20:22:49 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-May-18 20:22:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 20:22:49 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-18 20:22:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 20:22:49 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-18 20:22:49 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 20:22:49 LOG5 begin_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2009-May-18 20:22:49 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 20:22:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 20:22:49 LOG5 end_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2009-May-18 20:22:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 20:22:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-18 20:22:49 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-18 20:22:49 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2009-May-18 20:22:49 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-May-18 20:22:49 INFO2 astwait: Waiting for 27 seconds from 00:22:49 to 00:23:16 UTC ... 2009-May-18 20:22:49 LOG4 send_obs_status: To obs_status: <1> TASKTIME 27 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-18 20:22:49 START begin_task: Starting task 'waiting on waiting for AST time' 2009-May-18 20:22:49 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-May-18 20:23:16 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-May-18 20:23:16 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-May-18 20:23:16 INFO3 astwait: Finished waiting 2009-May-18 20:23:16 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-18 20:23:16 LOG5 dopset_later: Calling 'dopset_later 60.827798461161287' 2009-May-18 20:23:16 INFO3 dopset_later: Setting Doppler correction for 20:24:16 (60.8 seconds from now) 2009-May-18 20:23:16 LOG5 antvel: Calling 'antvel 313.900000 15.579140 F 60.827798461161287' 2009-May-18 20:23:16 LOG2 antvel: Transforming current Az = 313.90 ZA = 15.58 to apparent RA = 12:29:30.1 Dec = +07:16:15.5 2009-May-18 20:23:16 LOG2 antvel: Parameters to Doppler: Heliocentric 87856 2009 138 0.0 2009-May-18 20:23:16 INFO5 antvel: Computed antenna velocity: +23.28320 km/s 2009-May-18 20:23:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=23.2831988728 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-May-18 20:23:16 INFO4 dopset_gen: New sky frequencies: 1381.136163 1381.136163 1381.136163 1381.136163 1381.136163 1381.136163 1381.136163 1381.136163 1381.136163 2009-May-18 20:23:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.136163 sky0=1381.136163 sky1=1381.136163 sky2=1381.136163 sky3=1381.136163 sky4=1381.136163 sky5=1381.136163 sky6=1381.136163 sky7=1381.136163 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 20:23:16 LOG2 dopset_gen: Result from 'sky2syn': 1631.136163 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 20:23:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631136163.0} 2009-May-18 20:23:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 20:23:16 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-May-18 20:23:16 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-May-18 20:23:16 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:28:03.6 Dec = +07:19:22.1 2009-May-18 20:23:16 LOG3 track_source: Calling 'track_source AGESVC1B_p3_068 122803.6 071922.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-18 20:23:16 START begin_task: Starting task 'sending tracking commands' 2009-May-18 20:23:16 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2009-May-18 20:23:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_068} INFO {Slewing to source 'AGESVC1B_p3_068' ...} 2009-May-18 20:23:16 INFO1 track_source: Starting to track AGESVC1B_p3_068 2009-May-18 20:23:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_068" 2009-May-18 20:23:16 LOG3 vw_send: To DATATAKING: set ra 122803.6 2009-May-18 20:23:16 LOG3 vw_send: To DATATAKING: set dec 071922.1 2009-May-18 20:23:16 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-18 20:23:16 LOG3 vw_send: To DATATAKING: pnt tr 122803.6 071922.1 -CJ 2009-May-18 20:23:16 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-18 20:23:16 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-18 20:23:16 LOG5 finish_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2009-May-18 20:23:16 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-18 20:23:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 20:23:16 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-18 20:23:16 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2009-May-18 20:23:16 START begin_task: Starting task 'waiting on telescope' 2009-May-18 20:23:16 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-May-18 20:23:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-18 20:23:16 LOG3 waittrk: Start waittrk 5 2009-May-18 20:23:16 START begin_task: Starting task 'waiting on telescope movement' 2009-May-18 20:23:16 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-May-18 20:23:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631136163.0} 2009-May-18 20:23:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 20:23:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:23:16 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_068" 2009-May-18 20:23:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:23:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:23:16 LOG4 got_cormsg: From DATATAKING: set ra 122803.6 2009-May-18 20:23:16 LOG4 got_cormsg: From DATATAKING: set dec 071922.1 2009-May-18 20:23:16 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-18 20:23:16 LOG4 got_cormsg: From DATATAKING: pnt tr 122803.6 071922.1 -CJ 2009-May-18 20:23:16 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-18 20:23:16 LOG4 got_cormsg: From DATATAKING: 122803.6 2009-May-18 20:23:16 LOG4 got_cormsg: From DATATAKING: vw% 071922.1 2009-May-18 20:23:16 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2009-May-18 20:23:21 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-18 20:23:21 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-May-18 20:23:21 START begin_task: Starting task 'waiting on telescope on source' 2009-May-18 20:23:21 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2009-May-18 20:23:23 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-18 20:23:23 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2009-May-18 20:23:23 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-18 20:23:23 INFO2 waittrk: Now tracking AGESVC1B_p3_068 2009-May-18 20:23:23 LOG4 waittrk: Current telescope position: Az = 313.58 ZA = 15.56 2009-May-18 20:23:23 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-18 20:23:23 LOG5 finish_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-May-18 20:23:23 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-18 20:23:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 20:23:23 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-18 20:23:23 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-May-18 20:23:23 START begin_task: Starting task 'adjusting WAPP power' 2009-May-18 20:23:23 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2009-May-18 20:23:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-May-18 20:23:23 INFO2 adjust_power: Starting to adjust WAPP power 2009-May-18 20:23:23 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-May-18 20:23:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-May-18 20:23:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 20:23:23 START begin_task: Starting task 'waiting on adjpwrif2' 2009-May-18 20:23:23 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2009-May-18 20:23:23 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-May-18 20:23:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 20:23:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:23:26 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 20:23:26 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-May-18 20:23:26 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2009-May-18 20:23:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-May-18 20:23:26 START begin_task: Starting task 'adjusting WAPP power' 2009-May-18 20:23:26 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-May-18 20:23:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-May-18 20:23:26 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 20:23:26 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 20:23:26 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 20:23:26 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 20:23:26 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-May-18 20:23:26 LOG5 begin_task: Level: (5) ID = <10084> Status = 0 0 0 0 ok 2009-May-18 20:23:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-May-18 20:23:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:23:27 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 7 dB 2009-May-18 20:23:27 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 4 dB 2009-May-18 20:23:27 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 7 4 dB --- beam 3: 4 3 dB 2009-May-18 20:23:27 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-May-18 20:23:27 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-May-18 20:23:27 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-May-18 20:23:27 LOG5 end_task: Level: (5) ID = <10084> Status = 0 0 0 0 ok 2009-May-18 20:23:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.897 0.995 ALFA beam 1: 1.049 1.061 2009-May-18 20:23:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.902 1.093 ALFA beam 3: 0.974 0.980 2009-May-18 20:23:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.993 0.964 ALFA beam 5: 0.951 1.033 2009-May-18 20:23:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.008 0.109 ALFA beam 7: 1.105 0.135 2009-May-18 20:23:27 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-18 20:23:27 LOG5 finish_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-May-18 20:23:27 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-May-18 20:23:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 20:23:27 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-18 20:23:27 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-May-18 20:23:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-18 20:23:27 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-18 20:23:27 LOG5 finish_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2009-May-18 20:23:27 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-May-18 20:23:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 20:23:27 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-18 20:23:27 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2009-May-18 20:23:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-May-18 20:23:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-May-18 20:23:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-May-18 20:23:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-May-18 20:23:27 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-May-18 20:23:27 START begin_task: Starting task 'WAPP calibration' 2009-May-18 20:23:27 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2009-May-18 20:23:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-May-18 20:23:27 START begin_task: Starting task 'selecting calibration type' 2009-May-18 20:23:27 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2009-May-18 20:23:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-18 20:23:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-18 20:23:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 20:23:27 START begin_task: Starting task 'waiting on setcal' 2009-May-18 20:23:27 LOG5 begin_task: Level: (5) ID = <10087> Status = 0 0 0 0 ok 2009-May-18 20:23:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-May-18 20:23:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-18 20:23:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 20:23:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:23:28 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 20:23:28 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-18 20:23:28 LOG5 end_task: Level: (5) ID = <10087> Status = 0 0 0 0 ok 2009-May-18 20:23:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-18 20:23:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 20:23:28 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-18 20:23:28 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 20:23:28 LOG5 begin_task: Level: (5) ID = <10088> Status = 0 0 0 0 ok 2009-May-18 20:23:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:23:28 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 20:23:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 20:23:28 LOG5 end_task: Level: (5) ID = <10088> Status = 0 0 0 0 ok 2009-May-18 20:23:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 20:23:28 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-18 20:23:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 20:23:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-18 20:23:28 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 20:23:28 LOG5 begin_task: Level: (5) ID = <10089> Status = 0 0 0 0 ok 2009-May-18 20:23:28 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 20:23:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 20:23:28 LOG5 end_task: Level: (5) ID = <10089> Status = 0 0 0 0 ok 2009-May-18 20:23:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 20:23:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-18 20:23:28 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-18 20:23:28 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2009-May-18 20:23:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-May-18 20:23:28 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-May-18 20:23:28 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-May-18 20:23:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-18 20:23:28 LOG5 begin_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2009-May-18 20:23:28 NOTE WAPPDATA-new_file: New FITS file: wapp.20090518.a2048.0001.fits 2009-May-18 20:23:28 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-18 20:23:28 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090518.a2048.0001.fits} 2009-May-18 20:23:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-May-18 20:23:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-18 20:23:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-18 20:23:28 LOG5 end_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2009-May-18 20:23:28 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-May-18 20:23:28 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-May-18 20:23:28 START begin_task: Starting task 'WAPP spectral observation' 2009-May-18 20:23:28 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2009-May-18 20:23:28 LOG5 log_alfabeam: Parameters: 12.467666666666668 7.3228055555555569 11.728436 2009.3801495677744 58.299942 2009-May-18 20:23:28 LOG4 log_alfabeam: ALFABEAM 0 12.467666666666664 7.322805555555553 2009-May-18 20:23:28 LOG4 log_alfabeam: ALFABEAM 1 12.465421118861595 7.420640418774212 2009-May-18 20:23:28 LOG4 log_alfabeam: ALFABEAM 2 12.461136310908410 7.355843908862331 2009-May-18 20:23:28 LOG4 log_alfabeam: ALFABEAM 3 12.463344331449171 7.257818022711027 2009-May-18 20:23:28 LOG4 log_alfabeam: ALFABEAM 4 12.469880886548328 7.224702419626620 2009-May-18 20:23:28 LOG4 log_alfabeam: ALFABEAM 5 12.474216038177515 7.290227192774034 2009-May-18 20:23:28 LOG4 log_alfabeam: ALFABEAM 6 12.471964279256794 7.388138838265927 2009-May-18 20:23:28 INFO2 take_data: Starting WAPP scan: 913800203 2009-May-18 20:23:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-May-18 20:23:29 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-18 20:23:29 LOG5 begin_task: Level: (5) ID = <10092> Status = 0 0 0 0 ok 2009-May-18 20:23:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 20:23:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:23:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 0.995 1.049 1.061 2009-May-18 20:23:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 1.093 0.974 0.980 2009-May-18 20:23:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.993 0.964 0.951 1.033 2009-May-18 20:23:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 0.109 1.105 0.135 2009-May-18 20:23:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1410.00 2009-May-18 20:23:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.136163 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 20:23:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 20:23:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 20:23:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 20:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.543 (still bad) 2009-May-18 20:23:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 20:23:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 20:23:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 20:23:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 20:23:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 20:23:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 20:23:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-18 20:23:35 LOG5 end_task: Level: (5) ID = <10092> Status = 0 0 0 0 ok 2009-May-18 20:23:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-18 20:23:35 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2009-May-18 20:23:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-May-18 20:23:35 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-18 20:23:35 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-18 20:23:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-18 20:23:35 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2009-May-18 20:23:36 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-18 20:23:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-18 20:23:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-18 20:23:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-18 20:23:36 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2009-May-18 20:23:36 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-May-18 20:23:36 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-May-18 20:23:36 START begin_task: Starting task 'WAPP spectral observation' 2009-May-18 20:23:36 LOG5 begin_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2009-May-18 20:23:36 LOG5 log_alfabeam: Parameters: 12.467666666666668 7.3228055555555569 11.730386 2009.3801497895911 58.299942 2009-May-18 20:23:36 LOG4 log_alfabeam: ALFABEAM 0 12.467666666666664 7.322805555555555 2009-May-18 20:23:36 LOG4 log_alfabeam: ALFABEAM 1 12.465429371039797 7.420682172154947 2009-May-18 20:23:36 LOG4 log_alfabeam: ALFABEAM 2 12.461139121404159 7.355966379109150 2009-May-18 20:23:36 LOG4 log_alfabeam: ALFABEAM 3 12.463338824969423 7.257899178954053 2009-May-18 20:23:36 LOG4 log_alfabeam: ALFABEAM 4 12.469872574151401 7.224660894441602 2009-May-18 20:23:36 LOG4 log_alfabeam: ALFABEAM 5 12.474213292187875 7.290105015588801 2009-May-18 20:23:36 LOG4 log_alfabeam: ALFABEAM 6 12.471969780770136 7.388058624142987 2009-May-18 20:23:36 INFO2 take_data: Starting WAPP scan: 913800204 2009-May-18 20:23:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-May-18 20:23:36 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-18 20:23:36 LOG5 begin_task: Level: (5) ID = <10095> Status = 0 0 0 0 ok 2009-May-18 20:23:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 20:23:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1417.00 2009-May-18 20:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.543 (still bad) 2009-May-18 20:23:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.136163 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 20:23:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 20:23:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 20:23:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 20:23:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 20:23:42 LOG3 WAPP=2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 20:23:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 20:23:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 20:23:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 20:23:42 LOG3 WAPP=1-save_rfcalc: Channel 5: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 20:23:42 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-May-18 20:23:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 20:23:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-18 20:23:42 LOG5 end_task: Level: (5) ID = <10095> Status = 0 0 0 0 ok 2009-May-18 20:23:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-18 20:23:42 LOG5 end_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2009-May-18 20:23:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-18 20:23:42 STOP finish_task: Finishing task 'WAPP calibration' 2009-May-18 20:23:42 LOG5 finish_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2009-May-18 20:23:42 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-May-18 20:23:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 20:23:42 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-May-18 20:23:42 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2009-May-18 20:23:43 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-May-18 20:23:43 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 313.90 and ZA = 15.58 2009-May-18 20:23:43 LOG3 track_source: Calling 'track_source AGESVC1B_p3_068 313.90 15.5791396668 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-18 20:23:43 START begin_task: Starting task 'sending tracking commands' 2009-May-18 20:23:43 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2009-May-18 20:23:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_068} INFO {Slewing to source 'AGESVC1B_p3_068' ...} 2009-May-18 20:23:43 INFO1 track_source: Starting to track AGESVC1B_p3_068 2009-May-18 20:23:43 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_068" 2009-May-18 20:23:43 LOG3 vw_send: To DATATAKING: set ra 313.90 2009-May-18 20:23:43 LOG3 vw_send: To DATATAKING: set dec 15.5791396668 2009-May-18 20:23:43 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-18 20:23:43 LOG3 vw_send: To DATATAKING: pnt tr 313.90 15.5791396668 -CF 2009-May-18 20:23:43 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-18 20:23:43 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-18 20:23:43 LOG5 finish_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2009-May-18 20:23:43 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-18 20:23:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 20:23:43 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-18 20:23:43 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2009-May-18 20:23:43 LOG1 fixed_driftmap: Parameters: HA = -00:44:59.9 Start = 11:44:30.3 LST = 11:43:56.4 diff = 33.9 secs 2009-May-18 20:23:43 INFO2 fixed_driftmap: Waiting 31.9 seconds for RA 12:29:30 2009-May-18 20:23:43 INFO2 lstwait: Waiting for 31.8 secs from LST 11:43:56 to LST 11:44:28 ... 2009-May-18 20:23:43 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.835176649956296 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-18 20:23:43 START begin_task: Starting task 'waiting on wait on LST' 2009-May-18 20:23:43 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-May-18 20:23:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_068" 2009-May-18 20:23:43 LOG4 got_cormsg: From DATATAKING: set ra 313.90 2009-May-18 20:23:43 LOG4 got_cormsg: From DATATAKING: set dec 15.5791396668 2009-May-18 20:23:43 LOG4 got_cormsg: From DATATAKING: vw% 313.90 2009-May-18 20:23:43 LOG4 got_cormsg: From DATATAKING: vw% 15.5791396668 2009-May-18 20:23:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:23:43 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-18 20:23:43 LOG4 got_cormsg: From DATATAKING: pnt tr 313.90 15.5791396668 -CF 2009-May-18 20:23:43 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-18 20:23:43 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-18 20:23:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:24:15 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-May-18 20:24:15 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-May-18 20:24:15 LOG4 lstwait: Finished waiting 0.17 seconds late 2009-May-18 20:24:15 INFO3 lstwait: Finished waiting 2009-May-18 20:24:15 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-18 20:24:15 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-May-18 20:24:15 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-May-18 20:24:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-May-18 20:24:15 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-May-18 20:24:15 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-May-18 20:24:15 START begin_task: Starting task 'WAPP spectral observation' 2009-May-18 20:24:15 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2009-May-18 20:24:15 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-May-18 20:24:15 INFO2 take_data: Starting WAPP scan: 913800205 2009-May-18 20:24:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-May-18 20:24:15 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-18 20:24:15 LOG5 begin_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2009-May-18 20:24:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 20:24:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1456.00 2009-May-18 20:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.136163 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 20:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 20:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 20:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 20:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 20:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 20:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 20:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 20:24:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.136163 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 20:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 20:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 20:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 20:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:24:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:24:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 0.997 0.970 0.976 2009-May-18 20:24:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.910 1.102 0.980 0.987 2009-May-18 20:24:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.002 0.973 0.961 1.049 2009-May-18 20:24:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.014 0.109 1.110 0.135 2009-May-18 20:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 20:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 20:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 20:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:25:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:25:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.895 0.990 0.962 0.969 2009-May-18 20:25:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.901 1.093 0.996 1.002 2009-May-18 20:25:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.993 0.961 0.954 1.037 2009-May-18 20:25:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 0.109 1.104 0.135 2009-May-18 20:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 20:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 20:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 20:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 20:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 20:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 20:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 20:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 20:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:26:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:26:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 0.995 0.964 0.971 2009-May-18 20:26:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 1.092 0.988 0.994 2009-May-18 20:26:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.995 0.963 0.953 1.032 2009-May-18 20:26:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.010 0.109 1.105 0.135 2009-May-18 20:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 20:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 20:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 20:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 20:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 20:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:27:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:27:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.894 0.993 0.963 0.970 2009-May-18 20:27:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.901 1.090 0.977 0.980 2009-May-18 20:27:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.995 0.964 0.952 1.030 2009-May-18 20:27:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.011 0.109 1.106 0.135 2009-May-18 20:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 20:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 20:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:28:06 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 20:28:06.315 (seconds: 73686.315)!} 2009-May-18 20:28:06 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 20:28:06.315 (seconds: 73686.315)! 2009-May-18 20:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:28:07 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 73685.0 to 73686.0! 2009-May-18 20:28:08 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (73685.0 - 73687.0)! 2009-May-18 20:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-May-18 20:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 20:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-May-18 20:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-May-18 20:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 20:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:28:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-May-18 20:28:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.898 0.994 0.966 0.972 2009-May-18 20:28:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.904 1.094 0.974 0.979 2009-May-18 20:28:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.999 0.966 0.953 1.034 2009-May-18 20:28:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.012 0.108 1.107 0.134 2009-May-18 20:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 20:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-May-18 20:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-May-18 20:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 20:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 20:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 20:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 20:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 20:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-May-18 20:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 20:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-May-18 20:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-May-18 20:29:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-May-18 20:29:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 0.996 0.965 0.969 2009-May-18 20:29:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 1.092 0.974 0.978 2009-May-18 20:29:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.995 0.960 0.955 1.035 2009-May-18 20:29:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.009 0.108 1.107 0.134 2009-May-18 20:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-May-18 20:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 20:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-May-18 20:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-May-18 20:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:30:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:30:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.893 0.994 0.963 0.968 2009-May-18 20:30:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 1.090 0.972 0.976 2009-May-18 20:30:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.991 0.960 0.951 1.031 2009-May-18 20:30:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.012 0.109 1.109 0.134 2009-May-18 20:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 20:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 20:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 20:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 20:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 20:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-May-18 20:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 20:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 20:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 20:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 20:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 20:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 20:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 20:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 20:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 20:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 20:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:31:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:31:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.889 0.988 0.962 0.967 2009-May-18 20:31:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.906 1.094 0.972 0.975 2009-May-18 20:31:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.991 0.955 0.950 1.033 2009-May-18 20:31:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.007 0.109 1.104 0.134 2009-May-18 20:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 20:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-May-18 20:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 20:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 20:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 20:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 20:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 20:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 20:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 20:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad) 2009-May-18 20:32:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:32:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.891 0.988 0.963 0.969 2009-May-18 20:32:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.904 1.088 0.975 0.976 2009-May-18 20:32:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.990 0.956 0.953 1.035 2009-May-18 20:32:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.109 1.123 0.134 2009-May-18 20:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad) 2009-May-18 20:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad) 2009-May-18 20:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-May-18 20:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.131 (still bad) 2009-May-18 20:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.144 (still bad) 2009-May-18 20:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.161 (still bad) 2009-May-18 20:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.177 (still bad) 2009-May-18 20:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.186 (still bad) 2009-May-18 20:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.189 (still bad) 2009-May-18 20:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.184 (still bad) 2009-May-18 20:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.173 (still bad) 2009-May-18 20:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.158 (still bad) 2009-May-18 20:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.132 (still bad) 2009-May-18 20:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 20:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 20:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 20:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-May-18 20:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 20:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-May-18 20:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-May-18 20:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-May-18 20:33:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:33:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.895 0.995 0.970 0.973 2009-May-18 20:33:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.921 1.112 0.973 0.973 2009-May-18 20:33:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.993 0.960 0.958 1.039 2009-May-18 20:33:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.015 0.109 1.115 0.134 2009-May-18 20:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-May-18 20:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-May-18 20:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 20:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-May-18 20:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 20:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-May-18 20:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 20:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-May-18 20:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-May-18 20:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 20:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-May-18 20:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-May-18 20:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 20:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-May-18 20:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-May-18 20:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:34:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:34:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.895 0.998 0.983 0.987 2009-May-18 20:34:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 1.092 0.981 0.982 2009-May-18 20:34:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.992 0.959 0.955 1.038 2009-May-18 20:34:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.012 0.109 1.113 0.134 2009-May-18 20:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-May-18 20:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-May-18 20:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-May-18 20:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-May-18 20:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:35:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-May-18 20:35:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.888 0.987 0.958 0.962 2009-May-18 20:35:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 1.084 0.970 0.973 2009-May-18 20:35:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.985 0.951 0.949 1.031 2009-May-18 20:35:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 0.108 1.104 0.134 2009-May-18 20:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-May-18 20:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-May-18 20:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 20:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 20:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:36:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-May-18 20:36:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.894 0.994 0.960 0.960 2009-May-18 20:36:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 1.085 0.973 0.975 2009-May-18 20:36:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.987 0.951 0.947 1.030 2009-May-18 20:36:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 0.108 1.104 0.134 2009-May-18 20:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 20:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-May-18 20:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 20:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 20:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-May-18 20:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 20:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-May-18 20:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:37:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:37:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.890 0.989 0.961 0.963 2009-May-18 20:37:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 1.089 0.972 0.974 2009-May-18 20:37:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.988 0.956 0.951 1.031 2009-May-18 20:37:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.004 0.109 1.104 0.134 2009-May-18 20:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-May-18 20:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-May-18 20:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 20:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 20:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-May-18 20:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-May-18 20:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 20:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:38:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-May-18 20:38:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.891 0.989 0.961 0.962 2009-May-18 20:38:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 1.088 0.974 0.977 2009-May-18 20:38:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.989 0.954 0.950 1.030 2009-May-18 20:38:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 0.108 1.106 0.134 2009-May-18 20:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-May-18 20:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 20:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-May-18 20:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-May-18 20:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 20:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-May-18 20:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-May-18 20:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 20:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-May-18 20:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-May-18 20:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 20:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-May-18 20:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-May-18 20:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 20:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-May-18 20:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-May-18 20:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 20:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-May-18 20:39:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-May-18 20:39:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.900 0.996 0.966 0.968 2009-May-18 20:39:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.906 1.090 0.973 0.974 2009-May-18 20:39:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.990 0.956 0.949 1.030 2009-May-18 20:39:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.004 0.108 1.106 0.134 2009-May-18 20:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-May-18 20:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-May-18 20:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-May-18 20:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-May-18 20:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-May-18 20:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 20:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-May-18 20:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-May-18 20:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-May-18 20:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-May-18 20:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 20:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 20:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 20:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad) 2009-May-18 20:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2009-May-18 20:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2009-May-18 20:40:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:40:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.892 0.992 0.961 0.965 2009-May-18 20:40:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 1.089 0.971 0.975 2009-May-18 20:40:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.988 0.954 0.949 1.030 2009-May-18 20:40:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.019 0.109 1.121 0.134 2009-May-18 20:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad) 2009-May-18 20:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 20:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad) 2009-May-18 20:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 20:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 20:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 20:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-May-18 20:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-May-18 20:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-May-18 20:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad) 2009-May-18 20:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.131 (still bad) 2009-May-18 20:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.134 (still bad) 2009-May-18 20:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.132 (still bad) 2009-May-18 20:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.135 (still bad) 2009-May-18 20:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad) 2009-May-18 20:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-May-18 20:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-May-18 20:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-May-18 20:41:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-May-18 20:41:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.894 0.991 0.966 0.972 2009-May-18 20:41:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.905 1.094 0.971 0.975 2009-May-18 20:41:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.989 0.957 0.949 1.028 2009-May-18 20:41:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.006 0.108 1.108 0.134 2009-May-18 20:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad) 2009-May-18 20:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad) 2009-May-18 20:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-May-18 20:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-May-18 20:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 20:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-May-18 20:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-May-18 20:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 20:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-May-18 20:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-May-18 20:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:42:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:42:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.900 1.000 0.964 0.969 2009-May-18 20:42:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.904 1.090 0.974 0.978 2009-May-18 20:42:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.993 0.961 0.951 1.030 2009-May-18 20:42:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.010 0.109 1.109 0.134 2009-May-18 20:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 20:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 20:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad) 2009-May-18 20:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 20:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 20:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 20:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-May-18 20:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:43:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:43:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.905 1.007 0.972 0.976 2009-May-18 20:43:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.910 1.101 0.983 0.986 2009-May-18 20:43:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.002 0.967 0.960 1.041 2009-May-18 20:43:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.015 0.109 1.115 0.135 2009-May-18 20:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 20:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 20:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad) 2009-May-18 20:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:44:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 20:44:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-18 20:44:16 LOG5 end_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2009-May-18 20:44:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-18 20:44:16 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2009-May-18 20:44:16 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-May-18 20:44:16 LOG5 finish_task: Level: (2) ID = <10065> Status = 0 0 0 0 ok 2009-May-18 20:44:16 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-May-18 20:44:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-18 20:44:16 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-May-18 20:44:16 LOG5 end_task: Level: (2) ID = <10065> Status = 0 0 0 0 ok 2009-May-18 20:44:16 COMMAND run_command_line: EXECUTING command 19: 'ENDIF' 2009-May-18 20:44:16 COMMAND run_command_line: EXECUTING command 22: 'IF LSTSLEW(AGESVC1B_p3_070) < 120729 THEN' 2009-May-18 20:44:17 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1B_p3_070) < 120729 2009-May-18 20:44:17 INFO5 is_if_valid: Condition parsed as: 12.096052 < 12.124722222222223 2009-May-18 20:44:17 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=333.61 alfaangle=41.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_070 ra=122900.00 dec=71630.00' 2009-May-18 20:44:17 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-May-18 20:44:17 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-18 20:44:17 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 333.61 41.0 hcorcal 5 tracking no first 1 AGESVC1B_p3_070 122900.00 71630.00 J 8500.0 Heliocentric velocity(optical)' 2009-May-18 20:44:17 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-May-18 20:44:17 LOG5 begin_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2009-May-18 20:44:17 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1B_p3_068' 2009-May-18 20:44:17 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-May-18 20:44:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p3_070} 2009-May-18 20:44:17 INFO3 fixed_driftmap: Sending telescope to Az = 333.61 and ZA = 12.35 2009-May-18 20:44:17 LOG3 track_source: Calling 'track_source AGESVC1B_p3_070 333.61 12.3533915438 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-18 20:44:17 START begin_task: Starting task 'sending tracking commands' 2009-May-18 20:44:17 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2009-May-18 20:44:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_070} INFO {Slewing to source 'AGESVC1B_p3_070' ...} 2009-May-18 20:44:17 INFO1 track_source: Starting to track AGESVC1B_p3_070 2009-May-18 20:44:17 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_070" 2009-May-18 20:44:17 LOG3 vw_send: To DATATAKING: set ra 333.61 2009-May-18 20:44:17 LOG3 vw_send: To DATATAKING: set dec 12.3533915438 2009-May-18 20:44:17 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-18 20:44:17 LOG3 vw_send: To DATATAKING: pnt tr 333.61 12.3533915438 -CF 2009-May-18 20:44:17 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-18 20:44:17 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-18 20:44:17 LOG5 finish_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2009-May-18 20:44:17 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-18 20:44:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 20:44:17 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-18 20:44:17 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2009-May-18 20:44:17 START begin_task: Starting task 'rotate ALFA to +41 degrees' 2009-May-18 20:44:17 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2009-May-18 20:44:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +41 degrees ...} 2009-May-18 20:44:17 INFO2 rotate_alfa: ALFA commanded to +41.0 degrees 2009-May-18 20:44:17 LOG3 sock_errsend: To ALFAMOTOR: POSITION 41.0 REPLY 2009-May-18 20:44:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-May-18 20:44:17 START begin_task: Starting task 'waiting on ALFA rotation' 2009-May-18 20:44:17 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2009-May-18 20:44:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_070" 2009-May-18 20:44:17 LOG4 got_cormsg: From DATATAKING: set ra 333.61 2009-May-18 20:44:17 LOG4 got_cormsg: From DATATAKING: set dec 12.3533915438 2009-May-18 20:44:17 LOG4 got_cormsg: From DATATAKING: vw% 333.61 2009-May-18 20:44:17 LOG4 got_cormsg: From DATATAKING: vw% 12.3533915438 2009-May-18 20:44:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:44:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-18 20:44:17 LOG4 got_cormsg: From DATATAKING: pnt tr 333.61 12.3533915438 -CF 2009-May-18 20:44:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-18 20:44:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-18 20:44:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:44:28 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-May-18 20:44:28 INFO3 alfa_motor: ALFA rotator in-position +41.00 degrees 2009-May-18 20:44:28 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-May-18 20:44:28 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2009-May-18 20:44:28 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-18 20:44:28 STOP finish_task: Finishing task 'rotate ALFA to +41 degrees' 2009-May-18 20:44:28 LOG5 finish_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2009-May-18 20:44:28 INFO2 finish_task: DONE finished configuration: rotating ALFA to +41 degrees 2009-May-18 20:44:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 20:44:28 STOP end_task: Finishing task 'rotate ALFA to +41 degrees' with status 'OK' 2009-May-18 20:44:28 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2009-May-18 20:44:28 START begin_task: Starting task 'waiting on telescope' 2009-May-18 20:44:28 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-May-18 20:44:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-18 20:44:28 LOG3 waittrk: Start waittrk 5 2009-May-18 20:44:28 START begin_task: Starting task 'waiting on telescope movement' 2009-May-18 20:44:28 LOG5 begin_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2009-May-18 20:44:33 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-18 20:44:33 LOG5 end_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2009-May-18 20:44:34 START begin_task: Starting task 'waiting on telescope on source' 2009-May-18 20:44:34 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2009-May-18 20:45:45 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-18 20:45:45 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2009-May-18 20:45:45 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-18 20:45:45 INFO2 waittrk: Now tracking AGESVC1B_p3_070 2009-May-18 20:45:45 LOG4 waittrk: Current telescope position: Az = 333.23 ZA = 12.33 2009-May-18 20:45:45 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-18 20:45:45 LOG5 finish_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-May-18 20:45:45 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-18 20:45:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 20:45:45 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-18 20:45:45 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-May-18 20:45:45 START begin_task: Starting task 'selecting calibration type' 2009-May-18 20:45:45 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-May-18 20:45:45 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-18 20:45:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-18 20:45:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 20:45:45 START begin_task: Starting task 'waiting on setcal' 2009-May-18 20:45:45 LOG5 begin_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2009-May-18 20:45:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-18 20:45:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 20:45:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:45:47 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 20:45:47 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-18 20:45:47 LOG5 end_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2009-May-18 20:45:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-18 20:45:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 20:45:47 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-18 20:45:47 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 20:45:47 LOG5 begin_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2009-May-18 20:45:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:45:47 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 20:45:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 20:45:47 LOG5 end_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2009-May-18 20:45:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 20:45:47 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-18 20:45:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 20:45:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-18 20:45:47 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 20:45:47 LOG5 begin_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2009-May-18 20:45:47 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 20:45:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 20:45:47 LOG5 end_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2009-May-18 20:45:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 20:45:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-18 20:45:47 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-18 20:45:47 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-May-18 20:45:47 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-May-18 20:45:47 INFO2 astwait: Waiting for 25 seconds from 00:45:47 to 00:46:12 UTC ... 2009-May-18 20:45:47 LOG4 send_obs_status: To obs_status: <1> TASKTIME 25 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-18 20:45:47 START begin_task: Starting task 'waiting on waiting for AST time' 2009-May-18 20:45:47 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-May-18 20:46:12 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-May-18 20:46:12 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-May-18 20:46:12 INFO3 astwait: Finished waiting 2009-May-18 20:46:12 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-18 20:46:12 LOG5 dopset_later: Calling 'dopset_later 60.915589978916152' 2009-May-18 20:46:12 INFO3 dopset_later: Setting Doppler correction for 20:47:12 (60.9 seconds from now) 2009-May-18 20:46:12 LOG5 antvel: Calling 'antvel 333.610000 12.353392 F 60.915589978916152' 2009-May-18 20:46:12 LOG2 antvel: Transforming current Az = 333.61 ZA = 12.35 to apparent RA = 12:29:30.1 Dec = +07:13:15.5 2009-May-18 20:46:12 LOG2 antvel: Parameters to Doppler: Heliocentric 89232 2009 138 0.0 2009-May-18 20:46:12 INFO5 antvel: Computed antenna velocity: +23.32834 km/s 2009-May-18 20:46:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=23.328343698200001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-May-18 20:46:12 INFO4 dopset_gen: New sky frequencies: 1381.135955 1381.135955 1381.135955 1381.135955 1381.135955 1381.135955 1381.135955 1381.135955 1381.135955 2009-May-18 20:46:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.135955 sky0=1381.135955 sky1=1381.135955 sky2=1381.135955 sky3=1381.135955 sky4=1381.135955 sky5=1381.135955 sky6=1381.135955 sky7=1381.135955 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 20:46:12 LOG2 dopset_gen: Result from 'sky2syn': 1631.135955 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 20:46:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631135955.0} 2009-May-18 20:46:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 20:46:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-May-18 20:46:12 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-May-18 20:46:12 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:28:03.5 Dec = +07:16:22.1 2009-May-18 20:46:12 LOG3 track_source: Calling 'track_source AGESVC1B_p3_070 122803.5 071622.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-18 20:46:12 START begin_task: Starting task 'sending tracking commands' 2009-May-18 20:46:12 LOG5 begin_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2009-May-18 20:46:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_070} INFO {Slewing to source 'AGESVC1B_p3_070' ...} 2009-May-18 20:46:12 INFO1 track_source: Starting to track AGESVC1B_p3_070 2009-May-18 20:46:12 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_070" 2009-May-18 20:46:12 LOG3 vw_send: To DATATAKING: set ra 122803.5 2009-May-18 20:46:12 LOG3 vw_send: To DATATAKING: set dec 071622.1 2009-May-18 20:46:12 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-18 20:46:12 LOG3 vw_send: To DATATAKING: pnt tr 122803.5 071622.1 -CJ 2009-May-18 20:46:12 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-18 20:46:12 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-18 20:46:12 LOG5 finish_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2009-May-18 20:46:12 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-18 20:46:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 20:46:12 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-18 20:46:12 LOG5 end_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2009-May-18 20:46:12 START begin_task: Starting task 'waiting on telescope' 2009-May-18 20:46:12 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-May-18 20:46:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-18 20:46:12 LOG3 waittrk: Start waittrk 5 2009-May-18 20:46:12 START begin_task: Starting task 'waiting on telescope movement' 2009-May-18 20:46:12 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2009-May-18 20:46:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631135955.0} 2009-May-18 20:46:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 20:46:12 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_070" 2009-May-18 20:46:12 LOG4 got_cormsg: From DATATAKING: set ra 122803.5 2009-May-18 20:46:12 LOG4 got_cormsg: From DATATAKING: set dec 071622.1 2009-May-18 20:46:12 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 122803.5 2009-May-18 20:46:12 LOG4 got_cormsg: From DATATAKING: vw% 071622.1 2009-May-18 20:46:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:46:12 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-18 20:46:12 LOG4 got_cormsg: From DATATAKING: pnt tr 122803.5 071622.1 -CJ 2009-May-18 20:46:12 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-18 20:46:12 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-18 20:46:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:46:17 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-18 20:46:17 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2009-May-18 20:46:17 START begin_task: Starting task 'waiting on telescope on source' 2009-May-18 20:46:17 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2009-May-18 20:46:19 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-18 20:46:19 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2009-May-18 20:46:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-18 20:46:19 INFO2 waittrk: Now tracking AGESVC1B_p3_070 2009-May-18 20:46:19 LOG4 waittrk: Current telescope position: Az = 333.31 ZA = 12.33 2009-May-18 20:46:19 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-18 20:46:19 LOG5 finish_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-May-18 20:46:19 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-18 20:46:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 20:46:19 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-18 20:46:19 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-May-18 20:46:19 START begin_task: Starting task 'adjusting WAPP power' 2009-May-18 20:46:19 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-May-18 20:46:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-May-18 20:46:19 INFO2 adjust_power: Starting to adjust WAPP power 2009-May-18 20:46:19 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-May-18 20:46:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-May-18 20:46:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 20:46:19 START begin_task: Starting task 'waiting on adjpwrif2' 2009-May-18 20:46:19 LOG5 begin_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2009-May-18 20:46:20 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-May-18 20:46:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 20:46:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:46:22 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 20:46:22 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-May-18 20:46:22 LOG5 end_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2009-May-18 20:46:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-May-18 20:46:22 START begin_task: Starting task 'adjusting WAPP power' 2009-May-18 20:46:22 LOG5 begin_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2009-May-18 20:46:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-May-18 20:46:22 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 20:46:22 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 20:46:22 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 20:46:22 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 20:46:22 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-May-18 20:46:22 LOG5 begin_task: Level: (5) ID = <10119> Status = 0 0 0 0 ok 2009-May-18 20:46:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:46:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-May-18 20:46:23 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 7 7 dB 2009-May-18 20:46:23 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 4 dB 2009-May-18 20:46:23 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2009-May-18 20:46:23 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-May-18 20:46:23 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-May-18 20:46:23 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-May-18 20:46:23 LOG5 end_task: Level: (5) ID = <10119> Status = 0 0 0 0 ok 2009-May-18 20:46:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.083 0.967 ALFA beam 1: 0.961 0.969 2009-May-18 20:46:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.087 1.064 ALFA beam 3: 0.926 0.942 2009-May-18 20:46:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.946 0.920 ALFA beam 5: 0.897 0.975 2009-May-18 20:46:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.994 0.109 ALFA beam 7: 1.089 0.135 2009-May-18 20:46:23 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-18 20:46:23 LOG5 finish_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2009-May-18 20:46:23 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-May-18 20:46:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 20:46:23 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-18 20:46:23 LOG5 end_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2009-May-18 20:46:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-18 20:46:23 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-18 20:46:23 LOG5 finish_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-May-18 20:46:23 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-May-18 20:46:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 20:46:23 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-18 20:46:23 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-May-18 20:46:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-May-18 20:46:23 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-May-18 20:46:23 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-May-18 20:46:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-May-18 20:46:23 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-May-18 20:46:23 START begin_task: Starting task 'WAPP calibration' 2009-May-18 20:46:23 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-May-18 20:46:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-May-18 20:46:23 START begin_task: Starting task 'selecting calibration type' 2009-May-18 20:46:23 LOG5 begin_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2009-May-18 20:46:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-18 20:46:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-18 20:46:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 20:46:23 START begin_task: Starting task 'waiting on setcal' 2009-May-18 20:46:23 LOG5 begin_task: Level: (5) ID = <10122> Status = 0 0 0 0 ok 2009-May-18 20:46:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-May-18 20:46:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-18 20:46:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 20:46:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:46:24 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 20:46:24 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-18 20:46:24 LOG5 end_task: Level: (5) ID = <10122> Status = 0 0 0 0 ok 2009-May-18 20:46:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-18 20:46:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 20:46:24 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-18 20:46:24 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 20:46:24 LOG5 begin_task: Level: (5) ID = <10123> Status = 0 0 0 0 ok 2009-May-18 20:46:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:46:24 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 20:46:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 20:46:24 LOG5 end_task: Level: (5) ID = <10123> Status = 0 0 0 0 ok 2009-May-18 20:46:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 20:46:24 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-18 20:46:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 20:46:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-18 20:46:24 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 20:46:24 LOG5 begin_task: Level: (5) ID = <10124> Status = 0 0 0 0 ok 2009-May-18 20:46:24 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 20:46:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 20:46:24 LOG5 end_task: Level: (5) ID = <10124> Status = 0 0 0 0 ok 2009-May-18 20:46:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 20:46:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-18 20:46:24 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-18 20:46:24 LOG5 end_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2009-May-18 20:46:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-May-18 20:46:24 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-May-18 20:46:24 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-May-18 20:46:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-18 20:46:24 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2009-May-18 20:46:24 NOTE WAPPDATA-new_file: New FITS file: wapp.20090518.a2048.0002.fits 2009-May-18 20:46:24 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-18 20:46:24 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090518.a2048.0002.fits} 2009-May-18 20:46:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-May-18 20:46:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-18 20:46:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-18 20:46:24 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2009-May-18 20:46:24 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-May-18 20:46:24 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-May-18 20:46:24 START begin_task: Starting task 'WAPP spectral observation' 2009-May-18 20:46:24 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2009-May-18 20:46:24 LOG5 log_alfabeam: Parameters: 12.467638888888889 7.2728055555555571 12.111705 2009.3801931705832 40.999992 2009-May-18 20:46:24 LOG4 log_alfabeam: ALFABEAM 0 12.467638888888883 7.272805555555560 2009-May-18 20:46:24 LOG4 log_alfabeam: ALFABEAM 1 12.465718460904229 7.375026601057471 2009-May-18 20:46:24 LOG4 log_alfabeam: ALFABEAM 2 12.461467297369627 7.307412419616981 2009-May-18 20:46:24 LOG4 log_alfabeam: ALFABEAM 3 12.463338023591737 7.204980507358315 2009-May-18 20:46:24 LOG4 log_alfabeam: ALFABEAM 4 12.469540000628646 7.170481557072530 2009-May-18 20:46:24 LOG4 log_alfabeam: ALFABEAM 5 12.473845689344204 7.238849599110350 2009-May-18 20:46:24 LOG4 log_alfabeam: ALFABEAM 6 12.471894941088104 7.340959476342888 2009-May-18 20:46:24 INFO2 take_data: Starting WAPP scan: 913800206 2009-May-18 20:46:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-May-18 20:46:25 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-18 20:46:25 LOG5 begin_task: Level: (5) ID = <10127> Status = 0 0 0 0 ok 2009-May-18 20:46:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 20:46:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:46:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.083 0.967 0.961 0.969 2009-May-18 20:46:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.064 0.926 0.942 2009-May-18 20:46:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.946 0.920 0.897 0.975 2009-May-18 20:46:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.994 0.109 1.089 0.135 2009-May-18 20:46:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2786.00 2009-May-18 20:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.135955 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 20:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.135955 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 20:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.135955 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 20:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.135955 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 20:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.524 (still bad) 2009-May-18 20:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.135955 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 20:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.135955 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 20:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.135955 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 20:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.135955 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 20:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.135955 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 20:46:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 20:46:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-18 20:46:31 LOG5 end_task: Level: (5) ID = <10127> Status = 0 0 0 0 ok 2009-May-18 20:46:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-18 20:46:31 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2009-May-18 20:46:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-May-18 20:46:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-18 20:46:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-18 20:46:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-18 20:46:31 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-May-18 20:46:32 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-18 20:46:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-18 20:46:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-18 20:46:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-18 20:46:32 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-May-18 20:46:32 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-May-18 20:46:32 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-May-18 20:46:32 START begin_task: Starting task 'WAPP spectral observation' 2009-May-18 20:46:32 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-May-18 20:46:32 LOG5 log_alfabeam: Parameters: 12.467638888888889 7.2728055555555571 12.113654 2009.3801933923999 40.999992 2009-May-18 20:46:32 LOG4 log_alfabeam: ALFABEAM 0 12.467638888888883 7.272805555555556 2009-May-18 20:46:32 LOG4 log_alfabeam: ALFABEAM 1 12.465732444415707 7.375084509531527 2009-May-18 20:46:32 LOG4 log_alfabeam: ALFABEAM 2 12.461472062807548 7.307599633331860 2009-May-18 20:46:32 LOG4 log_alfabeam: ALFABEAM 3 12.463328729906559 7.205111101927202 2009-May-18 20:46:32 LOG4 log_alfabeam: ALFABEAM 4 12.469525990307746 7.170424130849621 2009-May-18 20:46:32 LOG4 log_alfabeam: ALFABEAM 5 12.473841048133957 7.238662002124366 2009-May-18 20:46:32 LOG4 log_alfabeam: ALFABEAM 6 12.471904234281642 7.340830585857305 2009-May-18 20:46:32 INFO2 take_data: Starting WAPP scan: 913800207 2009-May-18 20:46:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-May-18 20:46:32 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-18 20:46:32 LOG5 begin_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2009-May-18 20:46:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 20:46:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2793.00 2009-May-18 20:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.524 (still bad) 2009-May-18 20:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.135955 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 20:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.135955 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 20:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.135955 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 20:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.135955 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 20:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.135955 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 20:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.135955 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 20:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.135955 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 20:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.135955 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 20:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.135955 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 20:46:38 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-May-18 20:46:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 20:46:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-18 20:46:38 LOG5 end_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2009-May-18 20:46:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-18 20:46:38 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-May-18 20:46:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-18 20:46:38 STOP finish_task: Finishing task 'WAPP calibration' 2009-May-18 20:46:38 LOG5 finish_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-May-18 20:46:38 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-May-18 20:46:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 20:46:38 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-May-18 20:46:38 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-May-18 20:46:39 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-May-18 20:46:39 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 333.61 and ZA = 12.35 2009-May-18 20:46:39 LOG3 track_source: Calling 'track_source AGESVC1B_p3_070 333.61 12.3533915438 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-18 20:46:39 START begin_task: Starting task 'sending tracking commands' 2009-May-18 20:46:39 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-May-18 20:46:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_070} INFO {Slewing to source 'AGESVC1B_p3_070' ...} 2009-May-18 20:46:39 INFO1 track_source: Starting to track AGESVC1B_p3_070 2009-May-18 20:46:39 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_070" 2009-May-18 20:46:39 LOG3 vw_send: To DATATAKING: set ra 333.61 2009-May-18 20:46:39 LOG3 vw_send: To DATATAKING: set dec 12.3533915438 2009-May-18 20:46:39 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-18 20:46:39 LOG3 vw_send: To DATATAKING: pnt tr 333.61 12.3533915438 -CF 2009-May-18 20:46:39 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-18 20:46:39 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-18 20:46:39 LOG5 finish_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-May-18 20:46:39 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-18 20:46:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 20:46:39 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-18 20:46:39 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-May-18 20:46:39 LOG1 fixed_driftmap: Parameters: HA = -00:22:00.1 Start = 12:07:30.2 LST = 12:06:56.2 diff = 34.0 secs 2009-May-18 20:46:39 INFO2 fixed_driftmap: Waiting 32 seconds for RA 12:29:30 2009-May-18 20:46:39 INFO2 lstwait: Waiting for 31.9 secs from LST 12:06:56 to LST 12:07:28 ... 2009-May-18 20:46:39 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.922968167717539 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-18 20:46:39 START begin_task: Starting task 'waiting on wait on LST' 2009-May-18 20:46:39 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-May-18 20:46:39 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_070" 2009-May-18 20:46:39 LOG4 got_cormsg: From DATATAKING: set ra 333.61 2009-May-18 20:46:39 LOG4 got_cormsg: From DATATAKING: set dec 12.3533915438 2009-May-18 20:46:39 LOG4 got_cormsg: From DATATAKING: vw% 333.61 2009-May-18 20:46:39 LOG4 got_cormsg: From DATATAKING: vw% 12.3533915438 2009-May-18 20:46:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:46:39 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-18 20:46:39 LOG4 got_cormsg: From DATATAKING: pnt tr 333.61 12.3533915438 -CF 2009-May-18 20:46:39 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-18 20:46:39 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-18 20:46:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 20:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 20:47:11 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-May-18 20:47:11 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-May-18 20:47:11 LOG4 lstwait: Finished waiting 0.08 seconds late 2009-May-18 20:47:11 INFO3 lstwait: Finished waiting 2009-May-18 20:47:11 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-18 20:47:11 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-May-18 20:47:11 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-May-18 20:47:11 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-May-18 20:47:11 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-May-18 20:47:11 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-May-18 20:47:11 START begin_task: Starting task 'WAPP spectral observation' 2009-May-18 20:47:11 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2009-May-18 20:47:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-May-18 20:47:11 INFO2 take_data: Starting WAPP scan: 913800208 2009-May-18 20:47:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-May-18 20:47:11 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-18 20:47:11 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2009-May-18 20:47:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 20:47:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2832.00 2009-May-18 20:47:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.135955 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 20:47:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.135955 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 20:47:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.135955 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 20:47:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.135955 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 20:47:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.135955 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 20:47:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.135955 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 20:47:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.135955 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 20:47:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.135955 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 20:47:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.135955 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 20:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 20:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:47:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:47:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 0.968 0.955 0.959 2009-May-18 20:47:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.064 0.924 0.943 2009-May-18 20:47:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.942 0.919 0.906 0.980 2009-May-18 20:47:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.995 0.109 1.089 0.135 2009-May-18 20:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 20:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 20:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 20:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 20:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 20:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 20:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 20:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 20:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 20:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2009-May-18 20:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2009-May-18 20:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.132 (still bad) 2009-May-18 20:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.135 (still bad) 2009-May-18 20:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-May-18 20:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-May-18 20:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2009-May-18 20:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:48:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:48:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.108 0.973 0.956 0.962 2009-May-18 20:48:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.065 0.932 0.951 2009-May-18 20:48:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.943 0.919 0.908 0.978 2009-May-18 20:48:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.995 0.109 1.089 0.135 2009-May-18 20:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 20:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 20:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 20:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 20:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 20:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 20:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-May-18 20:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.132 (still bad) 2009-May-18 20:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.144 (still bad) 2009-May-18 20:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.135 (still bad) 2009-May-18 20:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.133 (still bad) 2009-May-18 20:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad) 2009-May-18 20:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 20:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 20:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 20:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:49:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:49:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 0.970 0.957 0.961 2009-May-18 20:49:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.096 1.072 0.928 0.948 2009-May-18 20:49:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.942 0.919 0.907 0.979 2009-May-18 20:49:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.994 0.109 1.090 0.135 2009-May-18 20:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 20:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 20:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 20:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:50:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:50:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 0.970 0.956 0.959 2009-May-18 20:50:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.063 0.927 0.944 2009-May-18 20:50:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.943 0.919 0.905 0.976 2009-May-18 20:50:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.994 0.109 1.089 0.135 2009-May-18 20:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 20:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:51:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:51:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 0.968 0.955 0.956 2009-May-18 20:51:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.063 0.928 0.945 2009-May-18 20:51:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.952 0.924 0.902 0.978 2009-May-18 20:51:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.994 0.109 1.089 0.135 2009-May-18 20:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 20:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 20:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:52:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:52:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.107 0.971 0.956 0.958 2009-May-18 20:52:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.065 0.926 0.947 2009-May-18 20:52:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.944 0.920 0.904 0.978 2009-May-18 20:52:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.995 0.109 1.089 0.135 2009-May-18 20:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 20:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 20:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:53:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:53:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.111 0.975 0.963 0.966 2009-May-18 20:53:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.064 0.927 0.946 2009-May-18 20:53:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.943 0.919 0.903 0.975 2009-May-18 20:53:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.002 0.109 1.098 0.135 2009-May-18 20:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 20:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 20:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 20:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 20:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 20:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 20:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 20:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 20:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:54:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:54:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.110 0.974 0.968 0.968 2009-May-18 20:54:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 1.071 0.932 0.950 2009-May-18 20:54:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.947 0.921 0.909 0.983 2009-May-18 20:54:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.000 0.109 1.096 0.135 2009-May-18 20:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 20:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 20:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 20:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 20:55:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:55:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 0.969 0.958 0.959 2009-May-18 20:55:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.064 0.928 0.944 2009-May-18 20:55:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.944 0.916 0.902 0.977 2009-May-18 20:55:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.011 0.109 1.110 0.135 2009-May-18 20:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 20:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 20:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 20:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 20:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 20:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 20:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 20:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 20:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 20:56:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:56:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 0.967 0.960 0.962 2009-May-18 20:56:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.067 0.928 0.946 2009-May-18 20:56:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.942 0.915 0.903 0.979 2009-May-18 20:56:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.994 0.109 1.090 0.135 2009-May-18 20:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 20:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 20:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 20:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 20:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:57:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:57:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 0.971 0.958 0.961 2009-May-18 20:57:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.064 0.929 0.947 2009-May-18 20:57:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.947 0.921 0.903 0.980 2009-May-18 20:57:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.993 0.109 1.090 0.136 2009-May-18 20:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 20:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-18 20:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:58:04 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 20:58:04.308 (seconds: 75484.308)!} 2009-May-18 20:58:04 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 20:58:04.308 (seconds: 75484.308)! 2009-May-18 20:58:05 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 75483.0 to 75484.0! 2009-May-18 20:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:58:06 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (75483.0 - 75485.0)! 2009-May-18 20:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-18 20:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 20:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 20:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 20:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 20:58:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:58:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 0.967 0.958 0.959 2009-May-18 20:58:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.062 0.929 0.945 2009-May-18 20:58:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.942 0.913 0.907 0.979 2009-May-18 20:58:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.995 0.109 1.093 0.135 2009-May-18 20:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 20:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 20:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 20:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 20:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 20:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 20:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 20:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 20:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 20:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 20:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 20:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 20:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 20:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 20:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 20:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 20:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 20:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 20:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 20:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 20:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-May-18 20:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 20:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 20:59:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 20:59:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.109 0.973 0.958 0.960 2009-May-18 20:59:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.090 1.058 0.926 0.944 2009-May-18 20:59:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.937 0.913 0.904 0.976 2009-May-18 20:59:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.996 0.109 1.094 0.135 2009-May-18 20:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 20:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 20:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 20:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 20:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 20:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 20:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 20:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 21:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 21:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 21:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 21:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 21:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 21:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 21:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 21:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 21:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 21:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 21:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 21:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 21:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:00:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:00:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.097 0.962 0.953 0.956 2009-May-18 21:00:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.055 0.927 0.943 2009-May-18 21:00:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.910 0.904 0.976 2009-May-18 21:00:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.995 0.109 1.094 0.135 2009-May-18 21:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 21:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 21:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 21:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 21:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 21:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 21:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 21:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 21:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 21:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 21:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 21:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:01:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:01:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 0.963 0.951 0.954 2009-May-18 21:01:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.056 0.928 0.943 2009-May-18 21:01:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.934 0.908 0.900 0.973 2009-May-18 21:01:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.994 0.109 1.091 0.135 2009-May-18 21:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 21:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 21:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 21:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 21:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 21:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 21:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 21:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 21:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 21:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 21:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 21:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 21:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 21:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 21:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 21:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:02:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:02:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 0.968 0.954 0.955 2009-May-18 21:02:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.055 0.926 0.942 2009-May-18 21:02:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.934 0.909 0.902 0.976 2009-May-18 21:02:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.993 0.109 1.091 0.135 2009-May-18 21:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 21:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad) 2009-May-18 21:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad) 2009-May-18 21:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad) 2009-May-18 21:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 21:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 21:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-18 21:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 21:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 21:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 21:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 21:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 21:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-18 21:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 21:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 21:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 21:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 21:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 21:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-18 21:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad) 2009-May-18 21:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 21:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-May-18 21:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.131 (still bad) 2009-May-18 21:03:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:03:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 0.969 0.959 0.961 2009-May-18 21:03:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 1.061 0.930 0.950 2009-May-18 21:03:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.938 0.917 0.906 0.982 2009-May-18 21:03:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 0.109 1.143 0.135 2009-May-18 21:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.135 (still bad) 2009-May-18 21:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-May-18 21:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 21:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 21:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 21:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 21:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 21:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 21:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 21:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad) 2009-May-18 21:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 21:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 21:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 21:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 21:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 21:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 21:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 21:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 21:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad) 2009-May-18 21:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 21:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad) 2009-May-18 21:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 21:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 21:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 21:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 21:04:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:04:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 0.968 0.957 0.962 2009-May-18 21:04:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.096 1.064 0.929 0.948 2009-May-18 21:04:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.937 0.915 0.904 0.978 2009-May-18 21:04:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.996 0.109 1.096 0.135 2009-May-18 21:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad) 2009-May-18 21:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 21:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 21:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 21:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 21:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 21:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 21:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad) 2009-May-18 21:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad) 2009-May-18 21:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 21:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad) 2009-May-18 21:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 21:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 21:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad) 2009-May-18 21:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 21:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 21:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad) 2009-May-18 21:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 21:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 21:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 21:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad) 2009-May-18 21:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 21:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad) 2009-May-18 21:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad) 2009-May-18 21:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:05:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:05:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.098 0.967 0.951 0.957 2009-May-18 21:05:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.057 0.925 0.944 2009-May-18 21:05:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.937 0.911 0.902 0.972 2009-May-18 21:05:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.990 0.109 1.088 0.134 2009-May-18 21:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad) 2009-May-18 21:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 21:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 21:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad) 2009-May-18 21:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad) 2009-May-18 21:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 21:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad) 2009-May-18 21:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-May-18 21:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 21:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad) 2009-May-18 21:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad) 2009-May-18 21:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad) 2009-May-18 21:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 21:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 21:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad) 2009-May-18 21:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad) 2009-May-18 21:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 21:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 21:06:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:06:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 0.971 0.955 0.958 2009-May-18 21:06:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.059 0.926 0.942 2009-May-18 21:06:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.938 0.912 0.903 0.975 2009-May-18 21:06:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.998 0.109 1.096 0.135 2009-May-18 21:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:07:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 21:07:12 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-18 21:07:12 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2009-May-18 21:07:12 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-18 21:07:12 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2009-May-18 21:07:12 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-May-18 21:07:12 LOG5 finish_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2009-May-18 21:07:12 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-May-18 21:07:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-18 21:07:12 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-May-18 21:07:12 LOG5 end_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2009-May-18 21:07:12 COMMAND run_command_line: EXECUTING command 26: 'ENDIF' 2009-May-18 21:07:12 COMMAND run_command_line: EXECUTING command 29: 'IF LSTSLEW(AGESVC1B_p3_072) < 123029 THEN' 2009-May-18 21:07:13 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1B_p3_072) < 123029 2009-May-18 21:07:13 INFO5 is_if_valid: Condition parsed as: 12.475986666666667 < 12.508055555555556 2009-May-18 21:07:13 COMMAND run_command_line: EXECUTING command 30: 'FIXEDDRIFT az=1.28 alfaangle=18.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_072 ra=122900.00 dec=71330.00' 2009-May-18 21:07:13 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-May-18 21:07:13 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-18 21:07:13 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 1.28 18.1 hcorcal 5 tracking no first 1 AGESVC1B_p3_072 122900.00 71330.00 J 8500.0 Heliocentric velocity(optical)' 2009-May-18 21:07:13 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-May-18 21:07:13 LOG5 begin_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2009-May-18 21:07:13 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1B_p3_070' 2009-May-18 21:07:13 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-May-18 21:07:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p3_072} 2009-May-18 21:07:13 INFO3 fixed_driftmap: Sending telescope to Az = 1.28 and ZA = 11.19 2009-May-18 21:07:13 LOG3 track_source: Calling 'track_source AGESVC1B_p3_072 1.28 11.1854872260 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-18 21:07:13 START begin_task: Starting task 'sending tracking commands' 2009-May-18 21:07:13 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2009-May-18 21:07:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_072} INFO {Slewing to source 'AGESVC1B_p3_072' ...} 2009-May-18 21:07:13 INFO1 track_source: Starting to track AGESVC1B_p3_072 2009-May-18 21:07:13 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_072" 2009-May-18 21:07:13 LOG3 vw_send: To DATATAKING: set ra 1.28 2009-May-18 21:07:13 LOG3 vw_send: To DATATAKING: set dec 11.1854872260 2009-May-18 21:07:13 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-18 21:07:13 LOG3 vw_send: To DATATAKING: pnt tr 1.28 11.1854872260 -CF 2009-May-18 21:07:13 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-18 21:07:13 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-18 21:07:13 LOG5 finish_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2009-May-18 21:07:13 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-18 21:07:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:07:13 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-18 21:07:13 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2009-May-18 21:07:13 START begin_task: Starting task 'rotate ALFA to +18.1 degrees' 2009-May-18 21:07:13 LOG5 begin_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2009-May-18 21:07:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +18.1 degrees ...} 2009-May-18 21:07:13 INFO2 rotate_alfa: ALFA commanded to +18.1 degrees 2009-May-18 21:07:13 LOG3 sock_errsend: To ALFAMOTOR: POSITION 18.1 REPLY 2009-May-18 21:07:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-May-18 21:07:13 START begin_task: Starting task 'waiting on ALFA rotation' 2009-May-18 21:07:13 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2009-May-18 21:07:13 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_072" 2009-May-18 21:07:13 LOG4 got_cormsg: From DATATAKING: set ra 1.28 2009-May-18 21:07:13 LOG4 got_cormsg: From DATATAKING: set dec 11.1854872260 2009-May-18 21:07:13 LOG4 got_cormsg: From DATATAKING: vw% 1.28 2009-May-18 21:07:13 LOG4 got_cormsg: From DATATAKING: vw% 11.1854872260 2009-May-18 21:07:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:07:13 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-18 21:07:14 LOG4 got_cormsg: From DATATAKING: pnt tr 1.28 11.1854872260 -CF 2009-May-18 21:07:14 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-18 21:07:14 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-18 21:07:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:07:27 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-May-18 21:07:27 INFO3 alfa_motor: ALFA rotator in-position +18.10 degrees 2009-May-18 21:07:27 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-May-18 21:07:27 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2009-May-18 21:07:27 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-18 21:07:27 STOP finish_task: Finishing task 'rotate ALFA to +18.1 degrees' 2009-May-18 21:07:27 LOG5 finish_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2009-May-18 21:07:27 INFO2 finish_task: DONE finished configuration: rotating ALFA to +18.1 degrees 2009-May-18 21:07:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:07:27 STOP end_task: Finishing task 'rotate ALFA to +18.1 degrees' with status 'OK' 2009-May-18 21:07:27 LOG5 end_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2009-May-18 21:07:27 START begin_task: Starting task 'waiting on telescope' 2009-May-18 21:07:27 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2009-May-18 21:07:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-18 21:07:27 LOG3 waittrk: Start waittrk 5 2009-May-18 21:07:27 START begin_task: Starting task 'waiting on telescope movement' 2009-May-18 21:07:27 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-May-18 21:07:33 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-18 21:07:33 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-May-18 21:07:33 START begin_task: Starting task 'waiting on telescope on source' 2009-May-18 21:07:33 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2009-May-18 21:08:35 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-18 21:08:35 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2009-May-18 21:08:35 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-18 21:08:35 INFO2 waittrk: Now tracking AGESVC1B_p3_072 2009-May-18 21:08:35 LOG4 waittrk: Current telescope position: Az = 360.93 ZA = 11.16 2009-May-18 21:08:35 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-18 21:08:35 LOG5 finish_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2009-May-18 21:08:35 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-18 21:08:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:08:35 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-18 21:08:35 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2009-May-18 21:08:35 START begin_task: Starting task 'selecting calibration type' 2009-May-18 21:08:35 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-May-18 21:08:35 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-18 21:08:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-18 21:08:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 21:08:35 START begin_task: Starting task 'waiting on setcal' 2009-May-18 21:08:35 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2009-May-18 21:08:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-18 21:08:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 21:08:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:08:37 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 21:08:37 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-18 21:08:37 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2009-May-18 21:08:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-18 21:08:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 21:08:37 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-18 21:08:37 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 21:08:37 LOG5 begin_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2009-May-18 21:08:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:08:37 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 21:08:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 21:08:37 LOG5 end_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2009-May-18 21:08:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 21:08:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-18 21:08:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 21:08:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-18 21:08:37 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 21:08:37 LOG5 begin_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2009-May-18 21:08:37 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 21:08:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 21:08:37 LOG5 end_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2009-May-18 21:08:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 21:08:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-18 21:08:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-18 21:08:37 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-May-18 21:08:37 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-May-18 21:08:37 INFO2 astwait: Waiting for 31 seconds from 01:08:37 to 01:09:08 UTC ... 2009-May-18 21:08:37 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-18 21:08:37 START begin_task: Starting task 'waiting on waiting for AST time' 2009-May-18 21:08:37 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2009-May-18 21:09:08 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-May-18 21:09:08 LOG5 end_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2009-May-18 21:09:08 INFO3 astwait: Finished waiting 2009-May-18 21:09:08 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-18 21:09:08 LOG5 dopset_later: Calling 'dopset_later 61.299479377542355' 2009-May-18 21:09:08 INFO3 dopset_later: Setting Doppler correction for 21:10:08 (61.3 seconds from now) 2009-May-18 21:09:08 LOG5 antvel: Calling 'antvel 1.280000 11.185487 F 61.299479377542355' 2009-May-18 21:09:08 LOG2 antvel: Transforming current Az = 1.28 ZA = 11.19 to apparent RA = 12:29:30.1 Dec = +07:10:15.5 2009-May-18 21:09:08 LOG2 antvel: Parameters to Doppler: Heliocentric 90608 2009 138 0.0 2009-May-18 21:09:08 INFO5 antvel: Computed antenna velocity: +23.37391 km/s 2009-May-18 21:09:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=23.373908313899999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-May-18 21:09:08 INFO4 dopset_gen: New sky frequencies: 1381.135746 1381.135746 1381.135746 1381.135746 1381.135746 1381.135746 1381.135746 1381.135746 1381.135746 2009-May-18 21:09:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.135746 sky0=1381.135746 sky1=1381.135746 sky2=1381.135746 sky3=1381.135746 sky4=1381.135746 sky5=1381.135746 sky6=1381.135746 sky7=1381.135746 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 21:09:08 LOG2 dopset_gen: Result from 'sky2syn': 1631.135746 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 21:09:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631135746.0} 2009-May-18 21:09:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 21:09:08 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-May-18 21:09:08 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-May-18 21:09:08 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:28:03.2 Dec = +07:13:22.1 2009-May-18 21:09:08 LOG3 track_source: Calling 'track_source AGESVC1B_p3_072 122803.2 071322.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-18 21:09:08 START begin_task: Starting task 'sending tracking commands' 2009-May-18 21:09:08 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2009-May-18 21:09:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_072} INFO {Slewing to source 'AGESVC1B_p3_072' ...} 2009-May-18 21:09:08 INFO1 track_source: Starting to track AGESVC1B_p3_072 2009-May-18 21:09:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_072" 2009-May-18 21:09:08 LOG3 vw_send: To DATATAKING: set ra 122803.2 2009-May-18 21:09:08 LOG3 vw_send: To DATATAKING: set dec 071322.1 2009-May-18 21:09:08 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-18 21:09:08 LOG3 vw_send: To DATATAKING: pnt tr 122803.2 071322.1 -CJ 2009-May-18 21:09:08 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-18 21:09:08 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-18 21:09:08 LOG5 finish_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2009-May-18 21:09:08 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-18 21:09:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:09:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-18 21:09:08 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2009-May-18 21:09:08 START begin_task: Starting task 'waiting on telescope' 2009-May-18 21:09:08 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2009-May-18 21:09:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-18 21:09:08 LOG3 waittrk: Start waittrk 5 2009-May-18 21:09:08 START begin_task: Starting task 'waiting on telescope movement' 2009-May-18 21:09:08 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2009-May-18 21:09:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631135746.0} 2009-May-18 21:09:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 21:09:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:09:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_072" 2009-May-18 21:09:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:09:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:09:08 LOG4 got_cormsg: From DATATAKING: set ra 122803.2 2009-May-18 21:09:08 LOG4 got_cormsg: From DATATAKING: set dec 071322.1 2009-May-18 21:09:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-18 21:09:08 LOG4 got_cormsg: From DATATAKING: pnt tr 122803.2 071322.1 -CJ 2009-May-18 21:09:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-18 21:09:08 LOG4 got_cormsg: From DATATAKING: 122803.2 2009-May-18 21:09:08 LOG4 got_cormsg: From DATATAKING: vw% 071322.1 2009-May-18 21:09:08 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2009-May-18 21:09:13 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-18 21:09:13 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2009-May-18 21:09:13 START begin_task: Starting task 'waiting on telescope on source' 2009-May-18 21:09:13 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2009-May-18 21:09:15 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-18 21:09:15 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2009-May-18 21:09:15 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-18 21:09:15 INFO2 waittrk: Now tracking AGESVC1B_p3_072 2009-May-18 21:09:15 LOG4 waittrk: Current telescope position: Az = 361.02 ZA = 11.16 2009-May-18 21:09:15 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-18 21:09:15 LOG5 finish_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2009-May-18 21:09:15 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-18 21:09:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:09:15 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-18 21:09:15 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2009-May-18 21:09:15 START begin_task: Starting task 'adjusting WAPP power' 2009-May-18 21:09:15 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2009-May-18 21:09:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-May-18 21:09:15 INFO2 adjust_power: Starting to adjust WAPP power 2009-May-18 21:09:15 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-May-18 21:09:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-May-18 21:09:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 21:09:15 START begin_task: Starting task 'waiting on adjpwrif2' 2009-May-18 21:09:15 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2009-May-18 21:09:15 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-May-18 21:09:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 21:09:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:09:18 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 21:09:18 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-May-18 21:09:18 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2009-May-18 21:09:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-May-18 21:09:18 START begin_task: Starting task 'adjusting WAPP power' 2009-May-18 21:09:18 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2009-May-18 21:09:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-May-18 21:09:18 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 21:09:18 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 21:09:18 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 21:09:18 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 21:09:18 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-May-18 21:09:18 LOG5 begin_task: Level: (5) ID = <10154> Status = 0 0 0 0 ok 2009-May-18 21:09:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-May-18 21:09:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:09:19 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 7 7 dB 2009-May-18 21:09:19 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 4 dB 2009-May-18 21:09:19 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2009-May-18 21:09:19 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-May-18 21:09:19 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-May-18 21:09:19 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-May-18 21:09:19 LOG5 end_task: Level: (5) ID = <10154> Status = 0 0 0 0 ok 2009-May-18 21:09:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.112 0.971 ALFA beam 1: 0.955 0.957 2009-May-18 21:09:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.057 1.049 ALFA beam 3: 0.906 0.936 2009-May-18 21:09:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.933 0.894 ALFA beam 5: 0.900 0.950 2009-May-18 21:09:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.005 0.109 ALFA beam 7: 1.102 0.134 2009-May-18 21:09:19 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-18 21:09:19 LOG5 finish_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2009-May-18 21:09:19 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-May-18 21:09:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:09:19 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-18 21:09:19 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2009-May-18 21:09:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-18 21:09:19 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-18 21:09:19 LOG5 finish_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2009-May-18 21:09:19 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-May-18 21:09:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:09:19 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-18 21:09:19 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2009-May-18 21:09:19 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-May-18 21:09:19 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-May-18 21:09:19 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-May-18 21:09:19 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-May-18 21:09:19 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-May-18 21:09:19 START begin_task: Starting task 'WAPP calibration' 2009-May-18 21:09:19 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2009-May-18 21:09:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-May-18 21:09:19 START begin_task: Starting task 'selecting calibration type' 2009-May-18 21:09:19 LOG5 begin_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2009-May-18 21:09:19 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-18 21:09:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-18 21:09:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 21:09:19 START begin_task: Starting task 'waiting on setcal' 2009-May-18 21:09:19 LOG5 begin_task: Level: (5) ID = <10157> Status = 0 0 0 0 ok 2009-May-18 21:09:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-May-18 21:09:19 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-18 21:09:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 21:09:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:09:20 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 21:09:20 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-18 21:09:20 LOG5 end_task: Level: (5) ID = <10157> Status = 0 0 0 0 ok 2009-May-18 21:09:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-18 21:09:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 21:09:20 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-18 21:09:20 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 21:09:20 LOG5 begin_task: Level: (5) ID = <10158> Status = 0 0 0 0 ok 2009-May-18 21:09:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:09:20 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 21:09:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 21:09:20 LOG5 end_task: Level: (5) ID = <10158> Status = 0 0 0 0 ok 2009-May-18 21:09:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 21:09:20 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-18 21:09:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 21:09:20 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-18 21:09:20 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 21:09:20 LOG5 begin_task: Level: (5) ID = <10159> Status = 0 0 0 0 ok 2009-May-18 21:09:20 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 21:09:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 21:09:20 LOG5 end_task: Level: (5) ID = <10159> Status = 0 0 0 0 ok 2009-May-18 21:09:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 21:09:20 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-18 21:09:20 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-18 21:09:20 LOG5 end_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2009-May-18 21:09:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-May-18 21:09:20 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-May-18 21:09:20 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-May-18 21:09:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-18 21:09:20 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2009-May-18 21:09:20 NOTE WAPPDATA-new_file: New FITS file: wapp.20090518.a2048.0003.fits 2009-May-18 21:09:20 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-18 21:09:20 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090518.a2048.0003.fits} 2009-May-18 21:09:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-May-18 21:09:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-18 21:09:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-18 21:09:20 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2009-May-18 21:09:20 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-May-18 21:09:20 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-May-18 21:09:20 START begin_task: Starting task 'WAPP spectral observation' 2009-May-18 21:09:20 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2009-May-18 21:09:20 LOG5 log_alfabeam: Parameters: 12.467555555555554 7.2228055555555573 12.494973 2009.3802367733922 18.099960 2009-May-18 21:09:20 LOG4 log_alfabeam: ALFABEAM 0 12.467555555555732 7.222805555555554 2009-May-18 21:09:20 LOG4 log_alfabeam: ALFABEAM 1 12.466476399061795 7.327631265684754 2009-May-18 21:09:20 LOG4 log_alfabeam: ALFABEAM 2 12.461791880717261 7.258427095248747 2009-May-18 21:09:20 LOG4 log_alfabeam: ALFABEAM 3 12.462837607918489 7.153505495688138 2009-May-18 21:09:20 LOG4 log_alfabeam: ALFABEAM 4 12.468657586914262 7.118001912284715 2009-May-18 21:09:20 LOG4 log_alfabeam: ALFABEAM 5 12.473353589135124 7.187820910576168 2009-May-18 21:09:20 LOG4 log_alfabeam: ALFABEAM 6 12.472218164217722 7.292524630470102 2009-May-18 21:09:20 INFO2 take_data: Starting WAPP scan: 913800209 2009-May-18 21:09:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-May-18 21:09:21 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-18 21:09:21 LOG5 begin_task: Level: (5) ID = <10162> Status = 0 0 0 0 ok 2009-May-18 21:09:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 21:09:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:09:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.112 0.971 0.955 0.957 2009-May-18 21:09:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.057 1.049 0.906 0.936 2009-May-18 21:09:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.933 0.894 0.900 0.950 2009-May-18 21:09:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 0.109 1.102 0.134 2009-May-18 21:09:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4162.00 2009-May-18 21:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.135746 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 21:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 21:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 21:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 21:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 21:09:27 LOG3 WAPP=2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 21:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 21:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 21:09:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 21:09:27 LOG3 WAPP=1-save_rfcalc: Channel 5: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 21:09:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 21:09:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-18 21:09:27 LOG5 end_task: Level: (5) ID = <10162> Status = 0 0 0 0 ok 2009-May-18 21:09:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-18 21:09:27 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2009-May-18 21:09:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-May-18 21:09:27 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-18 21:09:27 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-18 21:09:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-18 21:09:27 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2009-May-18 21:09:28 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-18 21:09:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-18 21:09:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-18 21:09:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-18 21:09:28 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2009-May-18 21:09:28 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-May-18 21:09:28 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-May-18 21:09:28 START begin_task: Starting task 'WAPP spectral observation' 2009-May-18 21:09:28 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2009-May-18 21:09:28 LOG5 log_alfabeam: Parameters: 12.467555555555554 7.2228055555555573 12.496923 2009.3802369952086 18.099960 2009-May-18 21:09:28 LOG4 log_alfabeam: ALFABEAM 0 12.467555555555649 7.222805555555558 2009-May-18 21:09:28 LOG4 log_alfabeam: ALFABEAM 1 12.466493992249040 7.327671030461618 2009-May-18 21:09:28 LOG4 log_alfabeam: ALFABEAM 2 12.461797872762352 7.258641090733723 2009-May-18 21:09:28 LOG4 log_alfabeam: ALFABEAM 3 12.462825999000289 7.153680975187376 2009-May-18 21:09:28 LOG4 log_alfabeam: ALFABEAM 4 12.468640003790025 7.117961295937016 2009-May-18 21:09:28 LOG4 log_alfabeam: ALFABEAM 5 12.473347699558552 7.187605591255450 2009-May-18 21:09:28 LOG4 log_alfabeam: ALFABEAM 6 12.472229849321259 7.292351175474990 2009-May-18 21:09:28 INFO2 take_data: Starting WAPP scan: 913800210 2009-May-18 21:09:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-May-18 21:09:28 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-18 21:09:28 LOG5 begin_task: Level: (5) ID = <10165> Status = 0 0 0 0 ok 2009-May-18 21:09:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 21:09:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4169.00 2009-May-18 21:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.536 (still bad) 2009-May-18 21:09:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.135746 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 21:09:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 21:09:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 21:09:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 21:09:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 21:09:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 21:09:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 21:09:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 21:09:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 21:09:34 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-May-18 21:09:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 21:09:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-18 21:09:34 LOG5 end_task: Level: (5) ID = <10165> Status = 0 0 0 0 ok 2009-May-18 21:09:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-18 21:09:34 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2009-May-18 21:09:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-18 21:09:34 STOP finish_task: Finishing task 'WAPP calibration' 2009-May-18 21:09:34 LOG5 finish_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2009-May-18 21:09:34 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-May-18 21:09:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:09:34 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-May-18 21:09:34 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2009-May-18 21:09:35 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-May-18 21:09:35 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 1.28 and ZA = 11.19 2009-May-18 21:09:35 LOG3 track_source: Calling 'track_source AGESVC1B_p3_072 1.28 11.1854872260 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-18 21:09:35 START begin_task: Starting task 'sending tracking commands' 2009-May-18 21:09:35 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2009-May-18 21:09:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_072} INFO {Slewing to source 'AGESVC1B_p3_072' ...} 2009-May-18 21:09:35 INFO1 track_source: Starting to track AGESVC1B_p3_072 2009-May-18 21:09:35 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_072" 2009-May-18 21:09:35 LOG3 vw_send: To DATATAKING: set ra 1.28 2009-May-18 21:09:35 LOG3 vw_send: To DATATAKING: set dec 11.1854872260 2009-May-18 21:09:35 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-18 21:09:35 LOG3 vw_send: To DATATAKING: pnt tr 1.28 11.1854872260 -CF 2009-May-18 21:09:35 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-18 21:09:35 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-18 21:09:35 LOG5 finish_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2009-May-18 21:09:35 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-18 21:09:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:09:35 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-18 21:09:35 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2009-May-18 21:09:35 LOG1 fixed_driftmap: Parameters: HA = +00:01:00.1 Start = 12:30:30.3 LST = 12:29:55.9 diff = 34.4 secs 2009-May-18 21:09:35 INFO2 fixed_driftmap: Waiting 32.4 seconds for RA 12:29:30 2009-May-18 21:09:35 INFO2 lstwait: Waiting for 32.3 secs from LST 12:29:56 to LST 12:30:28 ... 2009-May-18 21:09:35 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.303267395780054 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-18 21:09:35 START begin_task: Starting task 'waiting on wait on LST' 2009-May-18 21:09:35 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-May-18 21:09:35 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_072" 2009-May-18 21:09:35 LOG4 got_cormsg: From DATATAKING: set ra 1.28 2009-May-18 21:09:35 LOG4 got_cormsg: From DATATAKING: set dec 11.1854872260 2009-May-18 21:09:35 LOG4 got_cormsg: From DATATAKING: vw% 1.28 2009-May-18 21:09:35 LOG4 got_cormsg: From DATATAKING: vw% 11.1854872260 2009-May-18 21:09:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:09:35 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-18 21:09:35 LOG4 got_cormsg: From DATATAKING: pnt tr 1.28 11.1854872260 -CF 2009-May-18 21:09:35 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-18 21:09:35 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-18 21:09:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:10:07 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-May-18 21:10:07 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-May-18 21:10:07 LOG4 lstwait: Finished waiting 0.70 seconds late 2009-May-18 21:10:07 INFO3 lstwait: Finished waiting 2009-May-18 21:10:07 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-18 21:10:07 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-May-18 21:10:07 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-May-18 21:10:07 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-May-18 21:10:07 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-May-18 21:10:07 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-May-18 21:10:07 START begin_task: Starting task 'WAPP spectral observation' 2009-May-18 21:10:07 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2009-May-18 21:10:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-May-18 21:10:07 INFO2 take_data: Starting WAPP scan: 913800211 2009-May-18 21:10:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-May-18 21:10:08 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-18 21:10:08 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2009-May-18 21:10:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 21:10:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4209.00 2009-May-18 21:10:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.135746 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 21:10:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 21:10:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 21:10:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 21:10:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 21:10:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 21:10:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 21:10:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 21:10:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.135746 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 21:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-May-18 21:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-May-18 21:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 21:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-May-18 21:10:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-May-18 21:10:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 0.959 0.946 0.949 2009-May-18 21:10:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.058 1.047 0.907 0.935 2009-May-18 21:10:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.936 0.898 0.904 0.950 2009-May-18 21:10:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.003 0.108 1.101 0.134 2009-May-18 21:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-May-18 21:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-May-18 21:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-May-18 21:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 21:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad) 2009-May-18 21:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-May-18 21:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 21:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad) 2009-May-18 21:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-May-18 21:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 21:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-May-18 21:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-May-18 21:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 21:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 21:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2009-May-18 21:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 21:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad) 2009-May-18 21:11:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-May-18 21:11:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 0.962 0.946 0.949 2009-May-18 21:11:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 1.056 0.910 0.935 2009-May-18 21:11:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.937 0.901 0.903 0.948 2009-May-18 21:11:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.004 0.108 1.101 0.134 2009-May-18 21:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad) 2009-May-18 21:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad) 2009-May-18 21:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad) 2009-May-18 21:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 21:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 21:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 21:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 21:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 21:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 21:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-May-18 21:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:12:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:12:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.108 0.965 0.952 0.955 2009-May-18 21:12:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 1.073 0.913 0.941 2009-May-18 21:12:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.942 0.902 0.908 0.957 2009-May-18 21:12:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 0.109 1.106 0.135 2009-May-18 21:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:13:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:13:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.107 0.966 0.948 0.952 2009-May-18 21:13:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 1.057 0.928 0.957 2009-May-18 21:13:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.951 0.915 0.908 0.961 2009-May-18 21:13:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.006 0.109 1.102 0.135 2009-May-18 21:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:14:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:14:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 0.965 0.950 0.951 2009-May-18 21:14:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.058 1.052 0.912 0.941 2009-May-18 21:14:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.949 0.912 0.906 0.960 2009-May-18 21:14:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 0.109 1.103 0.135 2009-May-18 21:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 21:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:15:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:15:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 0.963 0.948 0.948 2009-May-18 21:15:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.055 1.049 0.914 0.944 2009-May-18 21:15:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.944 0.908 0.905 0.960 2009-May-18 21:15:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.006 0.109 1.102 0.135 2009-May-18 21:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-18 21:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 21:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 21:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:16:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:16:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 0.964 0.949 0.954 2009-May-18 21:16:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.058 1.051 0.911 0.939 2009-May-18 21:16:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.942 0.907 0.905 0.956 2009-May-18 21:16:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.010 0.109 1.105 0.135 2009-May-18 21:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-May-18 21:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:17:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:17:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 0.964 0.951 0.954 2009-May-18 21:17:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.058 1.052 0.909 0.938 2009-May-18 21:17:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.941 0.903 0.909 0.958 2009-May-18 21:17:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.007 0.109 1.103 0.135 2009-May-18 21:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-May-18 21:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-May-18 21:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-18 21:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-May-18 21:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 21:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:18:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:18:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.108 0.965 0.952 0.953 2009-May-18 21:18:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.060 1.053 0.912 0.942 2009-May-18 21:18:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.942 0.907 0.912 0.963 2009-May-18 21:18:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.010 0.109 1.105 0.135 2009-May-18 21:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-18 21:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-18 21:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:19:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:19:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.110 0.966 0.956 0.959 2009-May-18 21:19:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.061 1.054 0.913 0.943 2009-May-18 21:19:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.944 0.909 0.912 0.962 2009-May-18 21:19:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.011 0.109 1.106 0.135 2009-May-18 21:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-18 21:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad) 2009-May-18 21:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-18 21:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-18 21:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-18 21:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 21:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-18 21:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-18 21:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-18 21:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-May-18 21:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-18 21:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-18 21:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-18 21:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-18 21:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 21:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-18 21:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:20:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-18 21:20:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 0.974 0.960 0.963 2009-May-18 21:20:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 1.063 0.918 0.950 2009-May-18 21:20:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.951 0.914 0.918 0.971 2009-May-18 21:20:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.016 0.110 1.113 0.136 2009-May-18 21:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-May-18 21:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-18 21:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-18 21:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-18 21:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-18 21:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-18 21:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-18 21:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 21:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 21:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-18 21:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 21:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:21:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-18 21:21:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.113 0.969 0.955 0.960 2009-May-18 21:21:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.067 1.058 0.918 0.949 2009-May-18 21:21:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.949 0.912 0.914 0.966 2009-May-18 21:21:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.015 0.110 1.110 0.136 2009-May-18 21:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-18 21:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-18 21:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-18 21:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-May-18 21:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-18 21:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-18 21:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2009-May-18 21:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-18 21:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-18 21:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-May-18 21:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 21:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-18 21:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-18 21:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:22:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-18 21:22:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 0.975 0.982 0.982 2009-May-18 21:22:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.069 1.061 0.918 0.951 2009-May-18 21:22:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.952 0.913 0.919 0.971 2009-May-18 21:22:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.017 0.110 1.113 0.136 2009-May-18 21:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-18 21:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-18 21:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-18 21:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-18 21:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 21:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 21:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-18 21:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 21:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 21:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:23:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:23:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.108 0.965 0.954 0.958 2009-May-18 21:23:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 1.055 0.915 0.944 2009-May-18 21:23:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.947 0.907 0.914 0.965 2009-May-18 21:23:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.014 0.109 1.110 0.135 2009-May-18 21:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-18 21:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 21:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 21:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-18 21:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 21:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 21:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 21:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 21:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:24:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-18 21:24:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.110 0.966 0.954 0.956 2009-May-18 21:24:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 1.056 0.916 0.944 2009-May-18 21:24:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.948 0.909 0.914 0.967 2009-May-18 21:24:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.014 0.110 1.110 0.136 2009-May-18 21:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 21:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 21:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 21:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-18 21:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 21:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-18 21:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-18 21:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 21:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-18 21:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-May-18 21:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 21:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-18 21:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-May-18 21:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 21:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-18 21:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-May-18 21:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 21:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-18 21:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-18 21:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-18 21:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:25:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:25:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.111 0.965 0.961 0.965 2009-May-18 21:25:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 1.055 0.916 0.945 2009-May-18 21:25:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.948 0.909 0.914 0.963 2009-May-18 21:25:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.011 0.109 1.109 0.136 2009-May-18 21:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 21:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-18 21:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 21:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-18 21:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-18 21:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-18 21:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-18 21:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-18 21:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-18 21:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-18 21:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-18 21:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-18 21:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-18 21:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-May-18 21:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-18 21:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-18 21:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 21:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-18 21:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-18 21:26:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-18 21:26:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.114 0.970 0.956 0.963 2009-May-18 21:26:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 1.056 0.916 0.946 2009-May-18 21:26:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.947 0.910 0.914 0.967 2009-May-18 21:26:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.015 0.110 1.113 0.136 2009-May-18 21:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-18 21:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 21:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-18 21:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-18 21:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-18 21:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 21:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:27:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-18 21:27:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.109 0.968 0.955 0.961 2009-May-18 21:27:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.062 1.056 0.916 0.949 2009-May-18 21:27:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.946 0.910 0.915 0.967 2009-May-18 21:27:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.014 0.110 1.109 0.136 2009-May-18 21:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-May-18 21:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-18 21:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-18 21:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 21:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-18 21:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-18 21:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-18 21:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 21:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-18 21:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-18 21:28:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-18 21:28:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.111 0.968 0.955 0.960 2009-May-18 21:28:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 1.055 0.920 0.952 2009-May-18 21:28:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.946 0.909 0.916 0.968 2009-May-18 21:28:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.011 0.110 1.109 0.136 2009-May-18 21:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-18 21:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-18 21:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-18 21:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-18 21:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 21:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-18 21:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-18 21:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-18 21:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-18 21:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-18 21:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-18 21:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 21:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-18 21:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-18 21:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-18 21:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:29:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-18 21:29:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.108 0.966 0.955 0.960 2009-May-18 21:29:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 1.056 0.914 0.946 2009-May-18 21:29:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.943 0.906 0.918 0.968 2009-May-18 21:29:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.016 0.110 1.114 0.136 2009-May-18 21:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-18 21:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-18 21:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-18 21:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-18 21:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-18 21:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-18 21:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-18 21:30:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 21:30:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-18 21:30:09 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2009-May-18 21:30:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-18 21:30:09 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2009-May-18 21:30:09 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-May-18 21:30:09 LOG5 finish_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2009-May-18 21:30:09 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-May-18 21:30:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-18 21:30:09 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-May-18 21:30:09 LOG5 end_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2009-May-18 21:30:09 COMMAND run_command_line: EXECUTING command 33: 'ENDIF' 2009-May-18 21:30:09 COMMAND run_command_line: EXECUTING command 36: 'IF LSTSLEW(AGESVC1B_p3_074) < 125329 THEN' 2009-May-18 21:30:10 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1B_p3_074) < 125329 2009-May-18 21:30:10 INFO5 is_if_valid: Condition parsed as: 12.859534666666667 < 12.891388888888889 2009-May-18 21:30:10 COMMAND run_command_line: EXECUTING command 37: 'FIXEDDRIFT az=28.24 alfaangle=-4.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_074 ra=122900.00 dec=71030.00' 2009-May-18 21:30:10 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-May-18 21:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-18 21:30:10 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-18 21:30:10 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 28.24 -4.4 hcorcal 5 tracking no first 1 AGESVC1B_p3_074 122900.00 71030.00 J 8500.0 Heliocentric velocity(optical)' 2009-May-18 21:30:10 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-May-18 21:30:10 LOG5 begin_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2009-May-18 21:30:10 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1B_p3_072' 2009-May-18 21:30:10 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-May-18 21:30:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p3_074} 2009-May-18 21:30:10 INFO3 fixed_driftmap: Sending telescope to Az = 28.24 and ZA = 12.66 2009-May-18 21:30:10 LOG3 track_source: Calling 'track_source AGESVC1B_p3_074 28.24 12.6604547140 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-18 21:30:10 START begin_task: Starting task 'sending tracking commands' 2009-May-18 21:30:10 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2009-May-18 21:30:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_074} INFO {Slewing to source 'AGESVC1B_p3_074' ...} 2009-May-18 21:30:10 INFO1 track_source: Starting to track AGESVC1B_p3_074 2009-May-18 21:30:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_074" 2009-May-18 21:30:10 LOG3 vw_send: To DATATAKING: set ra 28.24 2009-May-18 21:30:10 LOG3 vw_send: To DATATAKING: set dec 12.6604547140 2009-May-18 21:30:10 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-18 21:30:10 LOG3 vw_send: To DATATAKING: pnt tr 28.24 12.6604547140 -CF 2009-May-18 21:30:10 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-18 21:30:10 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-18 21:30:10 LOG5 finish_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2009-May-18 21:30:10 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-18 21:30:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:30:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-18 21:30:10 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2009-May-18 21:30:10 START begin_task: Starting task 'rotate ALFA to -4.4 degrees' 2009-May-18 21:30:10 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2009-May-18 21:30:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -4.4 degrees ...} 2009-May-18 21:30:10 INFO2 rotate_alfa: ALFA commanded to -4.4 degrees 2009-May-18 21:30:10 LOG3 sock_errsend: To ALFAMOTOR: POSITION -4.4 REPLY 2009-May-18 21:30:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-May-18 21:30:10 START begin_task: Starting task 'waiting on ALFA rotation' 2009-May-18 21:30:10 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2009-May-18 21:30:11 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_074" 2009-May-18 21:30:11 LOG4 got_cormsg: From DATATAKING: set ra 28.24 2009-May-18 21:30:11 LOG4 got_cormsg: From DATATAKING: set dec 12.6604547140 2009-May-18 21:30:11 LOG4 got_cormsg: From DATATAKING: vw% 28.24 2009-May-18 21:30:11 LOG4 got_cormsg: From DATATAKING: vw% 12.6604547140 2009-May-18 21:30:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:30:11 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-18 21:30:11 LOG4 got_cormsg: From DATATAKING: pnt tr 28.24 12.6604547140 -CF 2009-May-18 21:30:11 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-18 21:30:11 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-18 21:30:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:30:24 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-May-18 21:30:24 INFO3 alfa_motor: ALFA rotator in-position -4.40 degrees 2009-May-18 21:30:24 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-May-18 21:30:24 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2009-May-18 21:30:24 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-18 21:30:24 STOP finish_task: Finishing task 'rotate ALFA to -4.4 degrees' 2009-May-18 21:30:24 LOG5 finish_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2009-May-18 21:30:24 INFO2 finish_task: DONE finished configuration: rotating ALFA to -4.4 degrees 2009-May-18 21:30:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:30:24 STOP end_task: Finishing task 'rotate ALFA to -4.4 degrees' with status 'OK' 2009-May-18 21:30:24 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2009-May-18 21:30:24 START begin_task: Starting task 'waiting on telescope' 2009-May-18 21:30:24 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2009-May-18 21:30:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-18 21:30:24 LOG3 waittrk: Start waittrk 5 2009-May-18 21:30:24 START begin_task: Starting task 'waiting on telescope movement' 2009-May-18 21:30:24 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2009-May-18 21:30:29 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-18 21:30:29 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2009-May-18 21:30:29 START begin_task: Starting task 'waiting on telescope on source' 2009-May-18 21:30:29 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2009-May-18 21:31:31 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-18 21:31:31 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2009-May-18 21:31:31 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-18 21:31:31 INFO2 waittrk: Now tracking AGESVC1B_p3_074 2009-May-18 21:31:31 LOG4 waittrk: Current telescope position: Az = 387.96 ZA = 12.64 2009-May-18 21:31:31 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-18 21:31:31 LOG5 finish_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2009-May-18 21:31:31 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-18 21:31:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:31:31 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-18 21:31:31 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2009-May-18 21:31:31 START begin_task: Starting task 'selecting calibration type' 2009-May-18 21:31:31 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2009-May-18 21:31:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-18 21:31:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-18 21:31:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 21:31:31 START begin_task: Starting task 'waiting on setcal' 2009-May-18 21:31:31 LOG5 begin_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2009-May-18 21:31:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-18 21:31:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 21:31:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:31:33 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 21:31:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-18 21:31:33 LOG5 end_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2009-May-18 21:31:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-18 21:31:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 21:31:33 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-18 21:31:33 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 21:31:33 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2009-May-18 21:31:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:31:33 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 21:31:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 21:31:33 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2009-May-18 21:31:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 21:31:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-18 21:31:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 21:31:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-18 21:31:33 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 21:31:33 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2009-May-18 21:31:33 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 21:31:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 21:31:33 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2009-May-18 21:31:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 21:31:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-18 21:31:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-18 21:31:33 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2009-May-18 21:31:33 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-May-18 21:31:33 INFO2 astwait: Waiting for 31 seconds from 01:31:33 to 01:32:04 UTC ... 2009-May-18 21:31:33 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-18 21:31:33 START begin_task: Starting task 'waiting on waiting for AST time' 2009-May-18 21:31:33 LOG5 begin_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2009-May-18 21:32:04 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-May-18 21:32:04 LOG5 end_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2009-May-18 21:32:04 INFO3 astwait: Finished waiting 2009-May-18 21:32:04 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-18 21:32:04 LOG5 dopset_later: Calling 'dopset_later 61.236671497698346' 2009-May-18 21:32:04 INFO3 dopset_later: Setting Doppler correction for 21:33:04 (61.2 seconds from now) 2009-May-18 21:32:04 LOG5 antvel: Calling 'antvel 28.240000 12.660455 F 61.236671497698346' 2009-May-18 21:32:04 LOG2 antvel: Transforming current Az = 28.24 ZA = 12.66 to apparent RA = 12:29:30.1 Dec = +07:07:15.5 2009-May-18 21:32:04 LOG2 antvel: Parameters to Doppler: Heliocentric 91984 2009 138 0.0 2009-May-18 21:32:04 INFO5 antvel: Computed antenna velocity: +23.41945 km/s 2009-May-18 21:32:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=23.419448239800001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-May-18 21:32:04 INFO4 dopset_gen: New sky frequencies: 1381.135536 1381.135536 1381.135536 1381.135536 1381.135536 1381.135536 1381.135536 1381.135536 1381.135536 2009-May-18 21:32:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.135536 sky0=1381.135536 sky1=1381.135536 sky2=1381.135536 sky3=1381.135536 sky4=1381.135536 sky5=1381.135536 sky6=1381.135536 sky7=1381.135536 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 21:32:04 LOG2 dopset_gen: Result from 'sky2syn': 1631.135536 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 21:32:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631135536.0} 2009-May-18 21:32:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 21:32:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-May-18 21:32:04 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-May-18 21:32:04 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:28:03.2 Dec = +07:10:22.1 2009-May-18 21:32:04 LOG3 track_source: Calling 'track_source AGESVC1B_p3_074 122803.2 071022.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-18 21:32:04 START begin_task: Starting task 'sending tracking commands' 2009-May-18 21:32:04 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2009-May-18 21:32:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_074} INFO {Slewing to source 'AGESVC1B_p3_074' ...} 2009-May-18 21:32:04 INFO1 track_source: Starting to track AGESVC1B_p3_074 2009-May-18 21:32:04 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_074" 2009-May-18 21:32:04 LOG3 vw_send: To DATATAKING: set ra 122803.2 2009-May-18 21:32:04 LOG3 vw_send: To DATATAKING: set dec 071022.1 2009-May-18 21:32:04 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-18 21:32:04 LOG3 vw_send: To DATATAKING: pnt tr 122803.2 071022.1 -CJ 2009-May-18 21:32:04 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-18 21:32:04 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-18 21:32:04 LOG5 finish_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2009-May-18 21:32:04 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-18 21:32:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:32:04 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-18 21:32:04 LOG5 end_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2009-May-18 21:32:04 START begin_task: Starting task 'waiting on telescope' 2009-May-18 21:32:04 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2009-May-18 21:32:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-18 21:32:04 LOG3 waittrk: Start waittrk 5 2009-May-18 21:32:04 START begin_task: Starting task 'waiting on telescope movement' 2009-May-18 21:32:04 LOG5 begin_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2009-May-18 21:32:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631135536.0} 2009-May-18 21:32:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 21:32:04 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_074" 2009-May-18 21:32:04 LOG4 got_cormsg: From DATATAKING: set ra 122803.2 2009-May-18 21:32:04 LOG4 got_cormsg: From DATATAKING: set dec 071022.1 2009-May-18 21:32:04 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-18 21:32:04 LOG4 got_cormsg: From DATATAKING: vw% 122803.2 2009-May-18 21:32:04 LOG4 got_cormsg: From DATATAKING: vw% 071022.1 2009-May-18 21:32:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:32:04 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-18 21:32:04 LOG4 got_cormsg: From DATATAKING: pnt tr 122803.2 071022.1 -CJ 2009-May-18 21:32:04 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-18 21:32:04 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-18 21:32:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:32:09 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-18 21:32:09 LOG5 end_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2009-May-18 21:32:09 START begin_task: Starting task 'waiting on telescope on source' 2009-May-18 21:32:09 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2009-May-18 21:32:11 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-18 21:32:11 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2009-May-18 21:32:11 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-18 21:32:11 INFO2 waittrk: Now tracking AGESVC1B_p3_074 2009-May-18 21:32:11 LOG4 waittrk: Current telescope position: Az = 388.03 ZA = 12.65 2009-May-18 21:32:11 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-18 21:32:11 LOG5 finish_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2009-May-18 21:32:11 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-18 21:32:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:32:11 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-18 21:32:11 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2009-May-18 21:32:11 START begin_task: Starting task 'adjusting WAPP power' 2009-May-18 21:32:11 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2009-May-18 21:32:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-May-18 21:32:11 INFO2 adjust_power: Starting to adjust WAPP power 2009-May-18 21:32:11 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-May-18 21:32:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-May-18 21:32:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 21:32:11 START begin_task: Starting task 'waiting on adjpwrif2' 2009-May-18 21:32:11 LOG5 begin_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2009-May-18 21:32:11 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-May-18 21:32:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 21:32:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:32:14 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 21:32:14 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-May-18 21:32:14 LOG5 end_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2009-May-18 21:32:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-May-18 21:32:14 START begin_task: Starting task 'adjusting WAPP power' 2009-May-18 21:32:14 LOG5 begin_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2009-May-18 21:32:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-May-18 21:32:14 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 21:32:14 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 21:32:14 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 21:32:14 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 21:32:14 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-May-18 21:32:14 LOG5 begin_task: Level: (5) ID = <10189> Status = 0 0 0 0 ok 2009-May-18 21:32:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-May-18 21:32:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:32:15 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 7 dB 2009-May-18 21:32:15 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 4 dB 2009-May-18 21:32:15 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2009-May-18 21:32:15 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 4 0 dB 2009-May-18 21:32:15 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-May-18 21:32:15 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-May-18 21:32:15 LOG5 end_task: Level: (5) ID = <10189> Status = 0 0 0 0 ok 2009-May-18 21:32:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.883 0.977 ALFA beam 1: 0.952 0.941 2009-May-18 21:32:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.056 1.046 ALFA beam 3: 0.927 0.956 2009-May-18 21:32:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.945 0.901 ALFA beam 5: 0.928 0.970 2009-May-18 21:32:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.042 0.109 ALFA beam 7: 0.888 0.135 2009-May-18 21:32:15 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-18 21:32:15 LOG5 finish_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2009-May-18 21:32:15 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-May-18 21:32:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:32:15 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-18 21:32:15 LOG5 end_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2009-May-18 21:32:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-18 21:32:15 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-18 21:32:15 LOG5 finish_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2009-May-18 21:32:15 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-May-18 21:32:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:32:15 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-18 21:32:15 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2009-May-18 21:32:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-May-18 21:32:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-May-18 21:32:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-May-18 21:32:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-May-18 21:32:15 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-May-18 21:32:15 START begin_task: Starting task 'WAPP calibration' 2009-May-18 21:32:15 LOG5 begin_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2009-May-18 21:32:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-May-18 21:32:15 START begin_task: Starting task 'selecting calibration type' 2009-May-18 21:32:15 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2009-May-18 21:32:15 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-18 21:32:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-18 21:32:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 21:32:15 START begin_task: Starting task 'waiting on setcal' 2009-May-18 21:32:15 LOG5 begin_task: Level: (5) ID = <10192> Status = 0 0 0 0 ok 2009-May-18 21:32:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-May-18 21:32:15 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-18 21:32:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 21:32:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:32:15 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 21:32:15 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-18 21:32:15 LOG5 end_task: Level: (5) ID = <10192> Status = 0 0 0 0 ok 2009-May-18 21:32:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-18 21:32:15 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 21:32:15 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-18 21:32:15 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 21:32:15 LOG5 begin_task: Level: (5) ID = <10193> Status = 0 0 0 0 ok 2009-May-18 21:32:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:32:16 NOTE WAPPDATA-new_file: New FITS file: wapp.20090518.a2048.0004.fits 2009-May-18 21:32:16 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090518.a2048.0004.fits} 2009-May-18 21:32:16 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 21:32:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 21:32:16 LOG5 end_task: Level: (5) ID = <10193> Status = 0 0 0 0 ok 2009-May-18 21:32:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 21:32:16 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-18 21:32:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 21:32:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-18 21:32:16 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 21:32:16 LOG5 begin_task: Level: (5) ID = <10194> Status = 0 0 0 0 ok 2009-May-18 21:32:16 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 21:32:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 21:32:16 LOG5 end_task: Level: (5) ID = <10194> Status = 0 0 0 0 ok 2009-May-18 21:32:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 21:32:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-18 21:32:16 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-18 21:32:16 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2009-May-18 21:32:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-May-18 21:32:16 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-May-18 21:32:16 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-May-18 21:32:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-18 21:32:16 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2009-May-18 21:32:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:32:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.883 0.977 0.952 0.941 2009-May-18 21:32:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.056 1.046 0.927 0.956 2009-May-18 21:32:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.945 0.901 0.928 0.970 2009-May-18 21:32:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.109 0.888 0.135 2009-May-18 21:32:16 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-18 21:32:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-May-18 21:32:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-18 21:32:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-18 21:32:16 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2009-May-18 21:32:16 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-May-18 21:32:16 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-May-18 21:32:16 START begin_task: Starting task 'WAPP spectral observation' 2009-May-18 21:32:16 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2009-May-18 21:32:16 LOG5 log_alfabeam: Parameters: 12.467555555555554 7.1728055555555574 12.878242 2009.380280376201 -4.400012 2009-May-18 21:32:16 LOG4 log_alfabeam: ALFABEAM 0 12.467555555555558 7.172805555555558 2009-May-18 21:32:16 LOG4 log_alfabeam: ALFABEAM 1 12.467181911764460 7.274609327741775 2009-May-18 21:32:16 LOG4 log_alfabeam: ALFABEAM 2 12.461858743277821 7.207306583263957 2009-May-18 21:32:16 LOG4 log_alfabeam: ALFABEAM 3 12.462235563038709 7.105310084683206 2009-May-18 21:32:16 LOG4 log_alfabeam: ALFABEAM 4 12.467977539029794 7.070864933551005 2009-May-18 21:32:16 LOG4 log_alfabeam: ALFABEAM 5 12.473264294534690 7.138915095272425 2009-May-18 21:32:16 LOG4 log_alfabeam: ALFABEAM 6 12.472845558831983 7.240663392851429 2009-May-18 21:32:17 INFO2 take_data: Starting WAPP scan: 913800212 2009-May-18 21:32:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-May-18 21:32:17 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-18 21:32:17 LOG5 begin_task: Level: (5) ID = <10197> Status = 0 0 0 0 ok 2009-May-18 21:32:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 21:32:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5538.00 2009-May-18 21:32:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.135536 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 21:32:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.135536 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 21:32:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.135536 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 21:32:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.135536 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 21:32:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.135536 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 21:32:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.135536 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 21:32:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.135536 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 21:32:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.135536 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 21:32:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.135536 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 21:32:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 21:32:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-18 21:32:23 LOG5 end_task: Level: (5) ID = <10197> Status = 0 0 0 0 ok 2009-May-18 21:32:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-18 21:32:23 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2009-May-18 21:32:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-May-18 21:32:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-18 21:32:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-18 21:32:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-18 21:32:23 LOG5 begin_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2009-May-18 21:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.457 (still bad) 2009-May-18 21:32:24 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-18 21:32:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-18 21:32:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-18 21:32:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-18 21:32:24 LOG5 end_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2009-May-18 21:32:24 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-May-18 21:32:24 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-May-18 21:32:24 START begin_task: Starting task 'WAPP spectral observation' 2009-May-18 21:32:24 LOG5 begin_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2009-May-18 21:32:24 LOG5 log_alfabeam: Parameters: 12.467555555555554 7.1728055555555574 12.880192 2009.3802805980176 -4.400012 2009-May-18 21:32:24 LOG4 log_alfabeam: ALFABEAM 0 12.467555555555556 7.172805555555560 2009-May-18 21:32:24 LOG4 log_alfabeam: ALFABEAM 1 12.467195157139388 7.274619997890078 2009-May-18 21:32:24 LOG4 log_alfabeam: ALFABEAM 2 12.461863242687436 7.207470628120377 2009-May-18 21:32:24 LOG4 log_alfabeam: ALFABEAM 3 12.462226793898617 7.105463577018520 2009-May-18 21:32:24 LOG4 log_alfabeam: ALFABEAM 4 12.467964229405428 7.070853017052853 2009-May-18 21:32:24 LOG4 log_alfabeam: ALFABEAM 5 12.473259859427205 7.138750030510059 2009-May-18 21:32:24 LOG4 log_alfabeam: ALFABEAM 6 12.472854410041885 7.240510359342138 2009-May-18 21:32:24 INFO2 take_data: Starting WAPP scan: 913800213 2009-May-18 21:32:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-May-18 21:32:24 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-18 21:32:24 LOG5 begin_task: Level: (5) ID = <10200> Status = 0 0 0 0 ok 2009-May-18 21:32:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 21:32:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5545.00 2009-May-18 21:32:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.135536 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 21:32:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.135536 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 21:32:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.135536 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 21:32:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.135536 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 21:32:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.135536 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 21:32:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.135536 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 21:32:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.135536 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 21:32:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.135536 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 21:32:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.135536 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 21:32:30 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-May-18 21:32:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 21:32:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-18 21:32:30 LOG5 end_task: Level: (5) ID = <10200> Status = 0 0 0 0 ok 2009-May-18 21:32:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-18 21:32:30 LOG5 end_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2009-May-18 21:32:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-18 21:32:30 STOP finish_task: Finishing task 'WAPP calibration' 2009-May-18 21:32:30 LOG5 finish_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2009-May-18 21:32:30 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-May-18 21:32:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:32:30 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-May-18 21:32:30 LOG5 end_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2009-May-18 21:32:30 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-May-18 21:32:30 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 28.24 and ZA = 12.66 2009-May-18 21:32:30 LOG3 track_source: Calling 'track_source AGESVC1B_p3_074 28.24 12.6604547140 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-18 21:32:30 START begin_task: Starting task 'sending tracking commands' 2009-May-18 21:32:30 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2009-May-18 21:32:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_074} INFO {Slewing to source 'AGESVC1B_p3_074' ...} 2009-May-18 21:32:30 INFO1 track_source: Starting to track AGESVC1B_p3_074 2009-May-18 21:32:30 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_074" 2009-May-18 21:32:30 LOG3 vw_send: To DATATAKING: set ra 28.24 2009-May-18 21:32:30 LOG3 vw_send: To DATATAKING: set dec 12.6604547140 2009-May-18 21:32:30 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-18 21:32:30 LOG3 vw_send: To DATATAKING: pnt tr 28.24 12.6604547140 -CF 2009-May-18 21:32:30 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-18 21:32:30 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-18 21:32:30 LOG5 finish_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2009-May-18 21:32:30 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-18 21:32:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:32:31 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-18 21:32:31 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2009-May-18 21:32:31 LOG1 fixed_driftmap: Parameters: HA = +00:23:59.8 Start = 12:53:30.0 LST = 12:52:55.7 diff = 34.3 secs 2009-May-18 21:32:31 INFO2 fixed_driftmap: Waiting 32.3 seconds for RA 12:29:30 2009-May-18 21:32:31 INFO2 lstwait: Waiting for 32.2 secs from LST 12:52:56 to LST 12:53:28 ... 2009-May-18 21:32:31 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.240459515936038 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-18 21:32:31 START begin_task: Starting task 'waiting on wait on LST' 2009-May-18 21:32:31 LOG5 begin_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2009-May-18 21:32:31 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_074" 2009-May-18 21:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.059 (still bad) 2009-May-18 21:32:31 LOG4 got_cormsg: From DATATAKING: set ra 28.24 2009-May-18 21:32:31 LOG4 got_cormsg: From DATATAKING: set dec 12.6604547140 2009-May-18 21:32:31 LOG4 got_cormsg: From DATATAKING: vw% 28.24 2009-May-18 21:32:31 LOG4 got_cormsg: From DATATAKING: vw% 12.6604547140 2009-May-18 21:32:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:32:31 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-18 21:32:31 LOG4 got_cormsg: From DATATAKING: pnt tr 28.24 12.6604547140 -CF 2009-May-18 21:32:31 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-18 21:32:31 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-18 21:32:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:33:03 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-May-18 21:33:03 LOG5 end_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2009-May-18 21:33:03 LOG4 lstwait: Finished waiting 0.76 seconds late 2009-May-18 21:33:03 INFO3 lstwait: Finished waiting 2009-May-18 21:33:03 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-18 21:33:03 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-May-18 21:33:03 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-May-18 21:33:03 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-May-18 21:33:03 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-May-18 21:33:03 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-May-18 21:33:03 START begin_task: Starting task 'WAPP spectral observation' 2009-May-18 21:33:03 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2009-May-18 21:33:03 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-May-18 21:33:03 INFO2 take_data: Starting WAPP scan: 913800214 2009-May-18 21:33:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-May-18 21:33:04 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-18 21:33:04 LOG5 begin_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2009-May-18 21:33:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 21:33:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5585.00 2009-May-18 21:33:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.135536 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 21:33:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.135536 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 21:33:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.135536 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 21:33:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.135536 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 21:33:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.135536 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 21:33:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.135536 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 21:33:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.135536 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 21:33:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.135536 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 21:33:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.135536 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 21:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.059 (still bad) 2009-May-18 21:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.056 (still bad) 2009-May-18 21:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.056 (still bad) 2009-May-18 21:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.056 (still bad) 2009-May-18 21:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:33:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:33:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.881 0.958 0.950 0.939 2009-May-18 21:33:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.055 1.046 0.922 0.953 2009-May-18 21:33:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.945 0.899 0.927 0.972 2009-May-18 21:33:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 0.109 0.898 0.135 2009-May-18 21:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.056 (still bad) 2009-May-18 21:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.055 (still bad) 2009-May-18 21:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.056 (still bad) 2009-May-18 21:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.056 (still bad) 2009-May-18 21:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.056 (still bad) 2009-May-18 21:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:34:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:34:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.882 0.960 0.955 0.945 2009-May-18 21:34:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.060 1.046 0.924 0.956 2009-May-18 21:34:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.946 0.897 0.922 0.969 2009-May-18 21:34:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.109 0.899 0.135 2009-May-18 21:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.064 (still bad) 2009-May-18 21:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.062 (still bad) 2009-May-18 21:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.060 (still bad) 2009-May-18 21:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:35:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:35:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.885 0.961 0.952 0.939 2009-May-18 21:35:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.059 1.045 0.923 0.952 2009-May-18 21:35:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.946 0.896 0.926 0.969 2009-May-18 21:35:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.109 0.898 0.135 2009-May-18 21:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.056 (still bad) 2009-May-18 21:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.064 (still bad) 2009-May-18 21:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.055 (still bad) 2009-May-18 21:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:36:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:36:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.907 0.988 0.951 0.940 2009-May-18 21:36:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.059 1.049 0.929 0.960 2009-May-18 21:36:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.950 0.901 0.926 0.971 2009-May-18 21:36:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 0.109 0.898 0.135 2009-May-18 21:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.066 (still bad) 2009-May-18 21:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.070 (still bad) 2009-May-18 21:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.066 (still bad) 2009-May-18 21:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:37:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:37:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.888 0.968 0.952 0.943 2009-May-18 21:37:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.059 1.049 0.924 0.952 2009-May-18 21:37:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.951 0.902 0.927 0.972 2009-May-18 21:37:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 0.109 0.898 0.135 2009-May-18 21:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.059 (still bad) 2009-May-18 21:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.055 (still bad) 2009-May-18 21:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.056 (still bad) 2009-May-18 21:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.056 (still bad) 2009-May-18 21:38:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:38:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.888 0.966 0.951 0.941 2009-May-18 21:38:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.055 1.049 0.926 0.953 2009-May-18 21:38:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.966 0.914 0.926 0.972 2009-May-18 21:38:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 0.109 0.897 0.135 2009-May-18 21:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:39:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:39:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 0.975 0.962 0.948 2009-May-18 21:39:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.067 1.061 0.932 0.963 2009-May-18 21:39:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.959 0.910 0.933 0.980 2009-May-18 21:39:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 0.109 0.899 0.135 2009-May-18 21:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.066 (still bad) 2009-May-18 21:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.067 (still bad) 2009-May-18 21:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.057 (still bad) 2009-May-18 21:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:40:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:40:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.891 0.969 0.956 0.941 2009-May-18 21:40:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.062 1.056 0.925 0.957 2009-May-18 21:40:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.957 0.907 0.933 0.973 2009-May-18 21:40:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.109 0.901 0.135 2009-May-18 21:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:41:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:41:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.892 0.971 0.957 0.945 2009-May-18 21:41:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.062 1.060 0.927 0.959 2009-May-18 21:41:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.958 0.909 0.934 0.978 2009-May-18 21:41:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.109 0.902 0.135 2009-May-18 21:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.061 (still bad) 2009-May-18 21:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.062 (still bad) 2009-May-18 21:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.070 (still bad) 2009-May-18 21:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2009-May-18 21:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:42:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:42:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.893 0.971 0.957 0.945 2009-May-18 21:42:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.060 1.054 0.926 0.959 2009-May-18 21:42:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.959 0.906 0.932 0.978 2009-May-18 21:42:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.109 0.900 0.135 2009-May-18 21:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.059 (still bad) 2009-May-18 21:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.061 (still bad) 2009-May-18 21:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.058 (still bad) 2009-May-18 21:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.060 (still bad) 2009-May-18 21:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:43:01 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 21:43:01.300 (seconds: 78181.300)!} 2009-May-18 21:43:01 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 21:43:01.300 (seconds: 78181.300)! 2009-May-18 21:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:43:02 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 78180.0 to 78181.0! 2009-May-18 21:43:03 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (78180.0 - 78182.0)! 2009-May-18 21:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.071 (still bad) 2009-May-18 21:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.069 (still bad) 2009-May-18 21:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.072 (still bad) 2009-May-18 21:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.073 (still bad) 2009-May-18 21:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.072 (still bad) 2009-May-18 21:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.074 (still bad) 2009-May-18 21:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.070 (still bad) 2009-May-18 21:43:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:43:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.895 0.972 0.957 0.945 2009-May-18 21:43:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.067 1.059 0.926 0.958 2009-May-18 21:43:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.960 0.909 0.936 0.979 2009-May-18 21:43:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.109 0.900 0.135 2009-May-18 21:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.066 (still bad) 2009-May-18 21:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.066 (still bad) 2009-May-18 21:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.071 (still bad) 2009-May-18 21:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.066 (still bad) 2009-May-18 21:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.070 (still bad) 2009-May-18 21:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.070 (still bad) 2009-May-18 21:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.066 (still bad) 2009-May-18 21:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.071 (still bad) 2009-May-18 21:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.066 (still bad) 2009-May-18 21:44:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:44:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.893 0.972 0.957 0.944 2009-May-18 21:44:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.064 1.056 0.929 0.962 2009-May-18 21:44:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.960 0.909 0.935 0.979 2009-May-18 21:44:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.109 0.901 0.135 2009-May-18 21:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.066 (still bad) 2009-May-18 21:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.063 (still bad) 2009-May-18 21:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.069 (still bad) 2009-May-18 21:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.071 (still bad) 2009-May-18 21:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.062 (still bad) 2009-May-18 21:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.066 (still bad) 2009-May-18 21:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.073 (still bad) 2009-May-18 21:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.066 (still bad) 2009-May-18 21:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.070 (still bad) 2009-May-18 21:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:45:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:45:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.896 0.974 0.968 0.951 2009-May-18 21:45:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 1.060 0.931 0.963 2009-May-18 21:45:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.965 0.910 0.939 0.980 2009-May-18 21:45:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.109 0.903 0.135 2009-May-18 21:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.066 (still bad) 2009-May-18 21:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.066 (still bad) 2009-May-18 21:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-18 21:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.066 (still bad) 2009-May-18 21:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.071 (still bad) 2009-May-18 21:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.066 (still bad) 2009-May-18 21:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.074 (still bad) 2009-May-18 21:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.066 (still bad) 2009-May-18 21:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.071 (still bad) 2009-May-18 21:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.066 (still bad) 2009-May-18 21:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.074 (still bad) 2009-May-18 21:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.070 (still bad) 2009-May-18 21:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.075 (still bad) 2009-May-18 21:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.069 (still bad) 2009-May-18 21:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:46:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:46:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.896 0.972 0.960 0.944 2009-May-18 21:46:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 1.058 0.929 0.958 2009-May-18 21:46:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.963 0.906 0.938 0.977 2009-May-18 21:46:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.048 0.109 0.902 0.135 2009-May-18 21:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.072 (still bad) 2009-May-18 21:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.066 (still bad) 2009-May-18 21:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.069 (still bad) 2009-May-18 21:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-18 21:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.069 (still bad) 2009-May-18 21:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.069 (still bad) 2009-May-18 21:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.069 (still bad) 2009-May-18 21:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.066 (still bad) 2009-May-18 21:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.069 (still bad) 2009-May-18 21:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.069 (still bad) 2009-May-18 21:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:47:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:47:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 0.973 0.961 0.947 2009-May-18 21:47:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.067 1.058 0.930 0.959 2009-May-18 21:47:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.964 0.911 0.939 0.978 2009-May-18 21:47:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.109 0.902 0.135 2009-May-18 21:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.069 (still bad) 2009-May-18 21:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.070 (still bad) 2009-May-18 21:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.066 (still bad) 2009-May-18 21:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.069 (still bad) 2009-May-18 21:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.069 (still bad) 2009-May-18 21:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.070 (still bad) 2009-May-18 21:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.069 (still bad) 2009-May-18 21:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.069 (still bad) 2009-May-18 21:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.066 (still bad) 2009-May-18 21:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.069 (still bad) 2009-May-18 21:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.069 (still bad) 2009-May-18 21:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.071 (still bad) 2009-May-18 21:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.066 (still bad) 2009-May-18 21:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.069 (still bad) 2009-May-18 21:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2009-May-18 21:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.070 (still bad) 2009-May-18 21:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.064 (still bad) 2009-May-18 21:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.070 (still bad) 2009-May-18 21:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.066 (still bad) 2009-May-18 21:48:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:48:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.896 0.970 0.966 0.952 2009-May-18 21:48:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.067 1.057 0.930 0.959 2009-May-18 21:48:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.962 0.908 0.939 0.982 2009-May-18 21:48:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.109 0.902 0.136 2009-May-18 21:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2009-May-18 21:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.072 (still bad) 2009-May-18 21:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.070 (still bad) 2009-May-18 21:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.069 (still bad) 2009-May-18 21:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-18 21:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.072 (still bad) 2009-May-18 21:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.067 (still bad) 2009-May-18 21:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.067 (still bad) 2009-May-18 21:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-18 21:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.067 (still bad) 2009-May-18 21:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.064 (still bad) 2009-May-18 21:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2009-May-18 21:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.064 (still bad) 2009-May-18 21:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.067 (still bad) 2009-May-18 21:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-18 21:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.068 (still bad) 2009-May-18 21:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2009-May-18 21:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.065 (still bad) 2009-May-18 21:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.067 (still bad) 2009-May-18 21:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-18 21:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.065 (still bad) 2009-May-18 21:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.069 (still bad) 2009-May-18 21:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.065 (still bad) 2009-May-18 21:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:49:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-18 21:49:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 0.981 0.970 0.960 2009-May-18 21:49:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.066 0.937 0.969 2009-May-18 21:49:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.970 0.915 0.947 0.992 2009-May-18 21:49:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.056 0.110 0.912 0.136 2009-May-18 21:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.067 (still bad) 2009-May-18 21:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.065 (still bad) 2009-May-18 21:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2009-May-18 21:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.064 (still bad) 2009-May-18 21:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2009-May-18 21:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-18 21:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.070 (still bad) 2009-May-18 21:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2009-May-18 21:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.072 (still bad) 2009-May-18 21:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.067 (still bad) 2009-May-18 21:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-18 21:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.069 (still bad) 2009-May-18 21:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.065 (still bad) 2009-May-18 21:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.069 (still bad) 2009-May-18 21:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.065 (still bad) 2009-May-18 21:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-18 21:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.069 (still bad) 2009-May-18 21:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.067 (still bad) 2009-May-18 21:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.072 (still bad) 2009-May-18 21:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.067 (still bad) 2009-May-18 21:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.069 (still bad) 2009-May-18 21:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2009-May-18 21:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2009-May-18 21:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2009-May-18 21:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2009-May-18 21:50:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-18 21:50:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.892 0.972 0.960 0.948 2009-May-18 21:50:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 1.058 0.930 0.965 2009-May-18 21:50:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.960 0.911 0.937 0.983 2009-May-18 21:50:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.110 0.903 0.136 2009-May-18 21:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2009-May-18 21:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.067 (still bad) 2009-May-18 21:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2009-May-18 21:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2009-May-18 21:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.065 (still bad) 2009-May-18 21:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.070 (still bad) 2009-May-18 21:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.067 (still bad) 2009-May-18 21:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.067 (still bad) 2009-May-18 21:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.069 (still bad) 2009-May-18 21:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.067 (still bad) 2009-May-18 21:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2009-May-18 21:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.072 (still bad) 2009-May-18 21:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.069 (still bad) 2009-May-18 21:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.067 (still bad) 2009-May-18 21:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.072 (still bad) 2009-May-18 21:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.070 (still bad) 2009-May-18 21:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.069 (still bad) 2009-May-18 21:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-18 21:51:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-18 21:51:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.893 0.974 0.962 0.950 2009-May-18 21:51:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.067 1.057 0.931 0.965 2009-May-18 21:51:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.959 0.909 0.940 0.984 2009-May-18 21:51:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.110 0.902 0.136 2009-May-18 21:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.070 (still bad) 2009-May-18 21:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.067 (still bad) 2009-May-18 21:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2009-May-18 21:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-18 21:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.067 (still bad) 2009-May-18 21:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2009-May-18 21:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.069 (still bad) 2009-May-18 21:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.069 (still bad) 2009-May-18 21:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.072 (still bad) 2009-May-18 21:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.070 (still bad) 2009-May-18 21:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.070 (still bad) 2009-May-18 21:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2009-May-18 21:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.067 (still bad) 2009-May-18 21:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.070 (still bad) 2009-May-18 21:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.070 (still bad) 2009-May-18 21:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2009-May-18 21:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.070 (still bad) 2009-May-18 21:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.069 (still bad) 2009-May-18 21:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.072 (still bad) 2009-May-18 21:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.070 (still bad) 2009-May-18 21:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.067 (still bad) 2009-May-18 21:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.066 (still bad) 2009-May-18 21:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.069 (still bad) 2009-May-18 21:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.069 (still bad) 2009-May-18 21:52:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-18 21:52:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.889 0.973 0.959 0.947 2009-May-18 21:52:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 1.056 0.928 0.962 2009-May-18 21:52:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.957 0.906 0.938 0.981 2009-May-18 21:52:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.110 0.904 0.136 2009-May-18 21:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.071 (still bad) 2009-May-18 21:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2009-May-18 21:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2009-May-18 21:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.070 (still bad) 2009-May-18 21:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.067 (still bad) 2009-May-18 21:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2009-May-18 21:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.067 (still bad) 2009-May-18 21:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.067 (still bad) 2009-May-18 21:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.067 (still bad) 2009-May-18 21:53:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 21:53:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-18 21:53:05 LOG5 end_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2009-May-18 21:53:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-18 21:53:05 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2009-May-18 21:53:05 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-May-18 21:53:05 LOG5 finish_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2009-May-18 21:53:05 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-May-18 21:53:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-18 21:53:05 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-May-18 21:53:05 LOG5 end_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2009-May-18 21:53:05 COMMAND run_command_line: EXECUTING command 40: 'ENDIF' 2009-May-18 21:53:05 COMMAND run_command_line: EXECUTING command 43: 'IF LSTSLEW(AGESVC1B_p3_076) < 131629 THEN' 2009-May-18 21:53:06 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1B_p3_076) < 131629 2009-May-18 21:53:06 INFO5 is_if_valid: Condition parsed as: 13.246136 < 13.274722222222223 2009-May-18 21:53:06 COMMAND run_command_line: EXECUTING command 44: 'FIXEDDRIFT az=46.90 alfaangle=-20.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_076 ra=122900.00 dec=70730.00' 2009-May-18 21:53:06 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-May-18 21:53:06 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-18 21:53:06 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 46.90 -20.8 hcorcal 5 tracking no first 1 AGESVC1B_p3_076 122900.00 70730.00 J 8500.0 Heliocentric velocity(optical)' 2009-May-18 21:53:06 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-May-18 21:53:06 LOG5 begin_task: Level: (2) ID = <10205> Status = 0 0 0 0 ok 2009-May-18 21:53:06 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1B_p3_074' 2009-May-18 21:53:06 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-May-18 21:53:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p3_076} 2009-May-18 21:53:06 INFO3 fixed_driftmap: Sending telescope to Az = 46.90 and ZA = 16.07 2009-May-18 21:53:06 LOG3 track_source: Calling 'track_source AGESVC1B_p3_076 46.90 16.0671230442 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-18 21:53:06 START begin_task: Starting task 'sending tracking commands' 2009-May-18 21:53:06 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2009-May-18 21:53:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_076} INFO {Slewing to source 'AGESVC1B_p3_076' ...} 2009-May-18 21:53:06 INFO1 track_source: Starting to track AGESVC1B_p3_076 2009-May-18 21:53:06 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_076" 2009-May-18 21:53:06 LOG3 vw_send: To DATATAKING: set ra 46.90 2009-May-18 21:53:06 LOG3 vw_send: To DATATAKING: set dec 16.0671230442 2009-May-18 21:53:06 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-18 21:53:06 LOG3 vw_send: To DATATAKING: pnt tr 46.90 16.0671230442 -CF 2009-May-18 21:53:06 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-18 21:53:06 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-18 21:53:06 LOG5 finish_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2009-May-18 21:53:06 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-18 21:53:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:53:06 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-18 21:53:06 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2009-May-18 21:53:06 START begin_task: Starting task 'rotate ALFA to -20.8 degrees' 2009-May-18 21:53:06 LOG5 begin_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2009-May-18 21:53:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -20.8 degrees ...} 2009-May-18 21:53:06 INFO2 rotate_alfa: ALFA commanded to -20.8 degrees 2009-May-18 21:53:06 LOG3 sock_errsend: To ALFAMOTOR: POSITION -20.8 REPLY 2009-May-18 21:53:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-May-18 21:53:06 START begin_task: Starting task 'waiting on ALFA rotation' 2009-May-18 21:53:06 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2009-May-18 21:53:06 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_076" 2009-May-18 21:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.068 (still bad) 2009-May-18 21:53:06 LOG4 got_cormsg: From DATATAKING: set ra 46.90 2009-May-18 21:53:06 LOG4 got_cormsg: From DATATAKING: set dec 16.0671230442 2009-May-18 21:53:07 LOG4 got_cormsg: From DATATAKING: vw% 46.90 2009-May-18 21:53:07 LOG4 got_cormsg: From DATATAKING: vw% 16.0671230442 2009-May-18 21:53:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:53:07 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-18 21:53:07 LOG4 got_cormsg: From DATATAKING: pnt tr 46.90 16.0671230442 -CF 2009-May-18 21:53:07 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-18 21:53:07 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-18 21:53:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:53:17 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-May-18 21:53:17 INFO3 alfa_motor: ALFA rotator in-position -20.80 degrees 2009-May-18 21:53:17 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-May-18 21:53:17 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2009-May-18 21:53:17 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-18 21:53:17 STOP finish_task: Finishing task 'rotate ALFA to -20.8 degrees' 2009-May-18 21:53:17 LOG5 finish_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2009-May-18 21:53:17 INFO2 finish_task: DONE finished configuration: rotating ALFA to -20.8 degrees 2009-May-18 21:53:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:53:17 STOP end_task: Finishing task 'rotate ALFA to -20.8 degrees' with status 'OK' 2009-May-18 21:53:17 LOG5 end_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2009-May-18 21:53:17 START begin_task: Starting task 'waiting on telescope' 2009-May-18 21:53:17 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2009-May-18 21:53:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-18 21:53:17 LOG3 waittrk: Start waittrk 5 2009-May-18 21:53:17 START begin_task: Starting task 'waiting on telescope movement' 2009-May-18 21:53:17 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2009-May-18 21:53:22 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-18 21:53:22 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2009-May-18 21:53:22 START begin_task: Starting task 'waiting on telescope on source' 2009-May-18 21:53:22 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2009-May-18 21:54:38 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-18 21:54:38 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2009-May-18 21:54:38 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-18 21:54:38 INFO2 waittrk: Now tracking AGESVC1B_p3_076 2009-May-18 21:54:38 LOG4 waittrk: Current telescope position: Az = 406.67 ZA = 16.06 2009-May-18 21:54:38 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-18 21:54:38 LOG5 finish_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2009-May-18 21:54:38 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-18 21:54:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:54:38 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-18 21:54:38 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2009-May-18 21:54:38 START begin_task: Starting task 'selecting calibration type' 2009-May-18 21:54:38 LOG5 begin_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2009-May-18 21:54:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-18 21:54:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-18 21:54:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 21:54:38 START begin_task: Starting task 'waiting on setcal' 2009-May-18 21:54:38 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2009-May-18 21:54:38 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-18 21:54:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 21:54:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:54:39 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 21:54:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-18 21:54:39 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2009-May-18 21:54:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-18 21:54:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 21:54:39 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-18 21:54:39 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 21:54:39 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2009-May-18 21:54:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:54:39 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 21:54:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 21:54:39 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2009-May-18 21:54:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 21:54:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-18 21:54:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 21:54:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-18 21:54:39 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 21:54:39 LOG5 begin_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2009-May-18 21:54:39 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 21:54:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 21:54:39 LOG5 end_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2009-May-18 21:54:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 21:54:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-18 21:54:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-18 21:54:39 LOG5 end_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2009-May-18 21:54:39 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-May-18 21:54:39 INFO2 astwait: Waiting for 22 seconds from 01:54:39 to 01:55:01 UTC ... 2009-May-18 21:54:39 LOG4 send_obs_status: To obs_status: <1> TASKTIME 22 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-18 21:54:39 START begin_task: Starting task 'waiting on waiting for AST time' 2009-May-18 21:54:39 LOG5 begin_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2009-May-18 21:55:01 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-May-18 21:55:01 LOG5 end_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2009-May-18 21:55:01 INFO3 astwait: Finished waiting 2009-May-18 21:55:01 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-18 21:55:01 LOG5 dopset_later: Calling 'dopset_later 60.555032021712691' 2009-May-18 21:55:01 INFO3 dopset_later: Setting Doppler correction for 21:56:01 (60.6 seconds from now) 2009-May-18 21:55:01 LOG5 antvel: Calling 'antvel 46.900000 16.067123 F 60.555032021712691' 2009-May-18 21:55:01 LOG2 antvel: Transforming current Az = 46.90 ZA = 16.07 to apparent RA = 12:29:30.1 Dec = +07:04:15.5 2009-May-18 21:55:01 LOG2 antvel: Parameters to Doppler: Heliocentric 93361 2009 138 0.0 2009-May-18 21:55:01 INFO5 antvel: Computed antenna velocity: +23.46456 km/s 2009-May-18 21:55:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=23.464555911000001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-May-18 21:55:01 INFO4 dopset_gen: New sky frequencies: 1381.135328 1381.135328 1381.135328 1381.135328 1381.135328 1381.135328 1381.135328 1381.135328 1381.135328 2009-May-18 21:55:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.135328 sky0=1381.135328 sky1=1381.135328 sky2=1381.135328 sky3=1381.135328 sky4=1381.135328 sky5=1381.135328 sky6=1381.135328 sky7=1381.135328 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 21:55:01 LOG2 dopset_gen: Result from 'sky2syn': 1631.135328 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 21:55:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631135328.0} 2009-May-18 21:55:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 21:55:01 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-May-18 21:55:01 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-May-18 21:55:01 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:28:03.9 Dec = +07:07:22.0 2009-May-18 21:55:01 LOG3 track_source: Calling 'track_source AGESVC1B_p3_076 122803.9 070722.0 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-18 21:55:01 START begin_task: Starting task 'sending tracking commands' 2009-May-18 21:55:01 LOG5 begin_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2009-May-18 21:55:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_076} INFO {Slewing to source 'AGESVC1B_p3_076' ...} 2009-May-18 21:55:01 INFO1 track_source: Starting to track AGESVC1B_p3_076 2009-May-18 21:55:01 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_076" 2009-May-18 21:55:01 LOG3 vw_send: To DATATAKING: set ra 122803.9 2009-May-18 21:55:01 LOG3 vw_send: To DATATAKING: set dec 070722.0 2009-May-18 21:55:01 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-18 21:55:01 LOG3 vw_send: To DATATAKING: pnt tr 122803.9 070722.0 -CJ 2009-May-18 21:55:01 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-18 21:55:01 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-18 21:55:01 LOG5 finish_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2009-May-18 21:55:01 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-18 21:55:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:55:01 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-18 21:55:01 LOG5 end_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2009-May-18 21:55:01 START begin_task: Starting task 'waiting on telescope' 2009-May-18 21:55:01 LOG5 begin_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2009-May-18 21:55:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-18 21:55:01 LOG3 waittrk: Start waittrk 5 2009-May-18 21:55:01 START begin_task: Starting task 'waiting on telescope movement' 2009-May-18 21:55:01 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2009-May-18 21:55:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631135328.0} 2009-May-18 21:55:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 21:55:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:55:01 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_076" 2009-May-18 21:55:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:55:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:55:01 LOG4 got_cormsg: From DATATAKING: set ra 122803.9 2009-May-18 21:55:01 LOG4 got_cormsg: From DATATAKING: set dec 070722.0 2009-May-18 21:55:01 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-18 21:55:01 LOG4 got_cormsg: From DATATAKING: pnt tr 122803.9 070722.0 -CJ 2009-May-18 21:55:01 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-18 21:55:01 LOG4 got_cormsg: From DATATAKING: 122803.9 2009-May-18 21:55:01 LOG4 got_cormsg: From DATATAKING: vw% 070722.0 2009-May-18 21:55:01 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2009-May-18 21:55:06 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-18 21:55:06 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2009-May-18 21:55:06 START begin_task: Starting task 'waiting on telescope on source' 2009-May-18 21:55:06 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2009-May-18 21:55:08 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-18 21:55:08 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2009-May-18 21:55:08 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-18 21:55:08 INFO2 waittrk: Now tracking AGESVC1B_p3_076 2009-May-18 21:55:08 LOG4 waittrk: Current telescope position: Az = 406.71 ZA = 16.07 2009-May-18 21:55:08 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-18 21:55:08 LOG5 finish_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2009-May-18 21:55:08 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-18 21:55:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:55:08 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-18 21:55:08 LOG5 end_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2009-May-18 21:55:08 START begin_task: Starting task 'adjusting WAPP power' 2009-May-18 21:55:08 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2009-May-18 21:55:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-May-18 21:55:08 INFO2 adjust_power: Starting to adjust WAPP power 2009-May-18 21:55:08 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-May-18 21:55:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-May-18 21:55:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 21:55:08 START begin_task: Starting task 'waiting on adjpwrif2' 2009-May-18 21:55:08 LOG5 begin_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2009-May-18 21:55:09 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-May-18 21:55:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 21:55:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:55:11 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 21:55:11 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-May-18 21:55:11 LOG5 end_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2009-May-18 21:55:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-May-18 21:55:11 START begin_task: Starting task 'adjusting WAPP power' 2009-May-18 21:55:11 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2009-May-18 21:55:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-May-18 21:55:11 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 21:55:11 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 21:55:11 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 21:55:11 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 21:55:11 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-May-18 21:55:11 LOG5 begin_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2009-May-18 21:55:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-May-18 21:55:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:55:12 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 7 dB 2009-May-18 21:55:12 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 4 dB 2009-May-18 21:55:12 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2009-May-18 21:55:12 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 4 0 dB 2009-May-18 21:55:12 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-May-18 21:55:12 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-May-18 21:55:12 LOG5 end_task: Level: (5) ID = <10224> Status = 0 0 0 0 ok 2009-May-18 21:55:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.924 0.996 ALFA beam 1: 0.982 0.957 2009-May-18 21:55:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.116 1.087 ALFA beam 3: 1.007 1.029 2009-May-18 21:55:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.010 0.948 ALFA beam 5: 0.978 1.024 2009-May-18 21:55:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.081 0.109 ALFA beam 7: 0.935 0.135 2009-May-18 21:55:12 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-18 21:55:12 LOG5 finish_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2009-May-18 21:55:12 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-May-18 21:55:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:55:12 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-18 21:55:12 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2009-May-18 21:55:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-18 21:55:12 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-18 21:55:12 LOG5 finish_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2009-May-18 21:55:12 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-May-18 21:55:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:55:12 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-18 21:55:12 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2009-May-18 21:55:12 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-May-18 21:55:12 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-May-18 21:55:12 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-May-18 21:55:12 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-May-18 21:55:12 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-May-18 21:55:12 START begin_task: Starting task 'WAPP calibration' 2009-May-18 21:55:12 LOG5 begin_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2009-May-18 21:55:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-May-18 21:55:12 START begin_task: Starting task 'selecting calibration type' 2009-May-18 21:55:12 LOG5 begin_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2009-May-18 21:55:12 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-18 21:55:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-18 21:55:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 21:55:12 START begin_task: Starting task 'waiting on setcal' 2009-May-18 21:55:12 LOG5 begin_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2009-May-18 21:55:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-May-18 21:55:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-18 21:55:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 21:55:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:55:13 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 21:55:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-18 21:55:13 LOG5 end_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2009-May-18 21:55:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-18 21:55:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 21:55:13 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-18 21:55:13 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 21:55:13 LOG5 begin_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2009-May-18 21:55:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:55:13 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 21:55:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 21:55:13 LOG5 end_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2009-May-18 21:55:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 21:55:13 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-18 21:55:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 21:55:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-18 21:55:13 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 21:55:13 LOG5 begin_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2009-May-18 21:55:13 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 21:55:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 21:55:13 LOG5 end_task: Level: (5) ID = <10229> Status = 0 0 0 0 ok 2009-May-18 21:55:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 21:55:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-18 21:55:13 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-18 21:55:13 LOG5 end_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2009-May-18 21:55:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-May-18 21:55:13 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-May-18 21:55:13 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-May-18 21:55:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-18 21:55:13 LOG5 begin_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2009-May-18 21:55:13 NOTE WAPPDATA-new_file: New FITS file: wapp.20090518.a2048.0005.fits 2009-May-18 21:55:13 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-18 21:55:13 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090518.a2048.0005.fits} 2009-May-18 21:55:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-May-18 21:55:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-18 21:55:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-18 21:55:13 LOG5 end_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2009-May-18 21:55:13 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-May-18 21:55:13 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-May-18 21:55:13 START begin_task: Starting task 'WAPP spectral observation' 2009-May-18 21:55:13 LOG5 begin_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2009-May-18 21:55:13 LOG5 log_alfabeam: Parameters: 12.467749999999999 7.1227777777777774 13.261789 2009.3803240106979 -20.800095 2009-May-18 21:55:13 LOG4 log_alfabeam: ALFABEAM 0 12.467750000000001 7.122777777777777 2009-May-18 21:55:13 LOG4 log_alfabeam: ALFABEAM 1 12.467539542087634 7.220411279933996 2009-May-18 21:55:13 LOG4 log_alfabeam: ALFABEAM 2 12.461868256827220 7.155782037247600 2009-May-18 21:55:13 LOG4 log_alfabeam: ALFABEAM 3 12.462095688726238 7.057829865850387 2009-May-18 21:55:13 LOG4 log_alfabeam: ALFABEAM 4 12.468002354695860 7.024956926637021 2009-May-18 21:55:13 LOG4 log_alfabeam: ALFABEAM 5 12.473632866689755 7.090346260427774 2009-May-18 21:55:13 LOG4 log_alfabeam: ALFABEAM 6 12.473397585316201 7.187849720806152 2009-May-18 21:55:13 INFO2 take_data: Starting WAPP scan: 913800215 2009-May-18 21:55:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-May-18 21:55:14 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-18 21:55:14 LOG5 begin_task: Level: (5) ID = <10232> Status = 0 0 0 0 ok 2009-May-18 21:55:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 21:55:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:55:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 0.996 0.982 0.957 2009-May-18 21:55:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.116 1.087 1.007 1.029 2009-May-18 21:55:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 0.948 0.978 1.024 2009-May-18 21:55:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.109 0.935 0.135 2009-May-18 21:55:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6915.00 2009-May-18 21:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.135328 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 21:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.135328 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 21:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.135328 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 21:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.135328 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 21:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.135328 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 21:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.480 (still bad) 2009-May-18 21:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.135328 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 21:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.135328 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 21:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.135328 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 21:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.135328 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 21:55:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 21:55:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-18 21:55:20 LOG5 end_task: Level: (5) ID = <10232> Status = 0 0 0 0 ok 2009-May-18 21:55:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-18 21:55:20 LOG5 end_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2009-May-18 21:55:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-May-18 21:55:20 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-18 21:55:20 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-18 21:55:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-18 21:55:20 LOG5 begin_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2009-May-18 21:55:21 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-18 21:55:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-18 21:55:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-18 21:55:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-18 21:55:21 LOG5 end_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2009-May-18 21:55:21 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-May-18 21:55:21 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-May-18 21:55:21 START begin_task: Starting task 'WAPP spectral observation' 2009-May-18 21:55:21 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2009-May-18 21:55:21 LOG5 log_alfabeam: Parameters: 12.467749999999999 7.1227777777777774 13.263739 2009.3803242325146 -20.800095 2009-May-18 21:55:21 LOG4 log_alfabeam: ALFABEAM 0 12.467749999999999 7.122777777777770 2009-May-18 21:55:21 LOG4 log_alfabeam: ALFABEAM 1 12.467547323032061 7.220415065609199 2009-May-18 21:55:21 LOG4 log_alfabeam: ALFABEAM 2 12.461870898163301 7.155885816093035 2009-May-18 21:55:21 LOG4 log_alfabeam: ALFABEAM 3 12.462090504996032 7.057929984383104 2009-May-18 21:55:21 LOG4 log_alfabeam: ALFABEAM 4 12.467994506251653 7.024952648927614 2009-May-18 21:55:21 LOG4 log_alfabeam: ALFABEAM 5 12.473630267516032 7.090241677563480 2009-May-18 21:55:21 LOG4 log_alfabeam: ALFABEAM 6 12.473402790264840 7.187749535704852 2009-May-18 21:55:21 INFO2 take_data: Starting WAPP scan: 913800216 2009-May-18 21:55:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-May-18 21:55:21 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-18 21:55:21 LOG5 begin_task: Level: (5) ID = <10235> Status = 0 0 0 0 ok 2009-May-18 21:55:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 21:55:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6922.00 2009-May-18 21:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.520 (still bad) 2009-May-18 21:55:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.135328 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 21:55:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.135328 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 21:55:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.135328 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 21:55:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.135328 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 21:55:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.135328 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 21:55:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.135328 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 21:55:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.135328 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 21:55:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.135328 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 21:55:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.135328 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 21:55:27 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-May-18 21:55:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 21:55:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-18 21:55:27 LOG5 end_task: Level: (5) ID = <10235> Status = 0 0 0 0 ok 2009-May-18 21:55:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-18 21:55:27 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2009-May-18 21:55:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-18 21:55:27 STOP finish_task: Finishing task 'WAPP calibration' 2009-May-18 21:55:27 LOG5 finish_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2009-May-18 21:55:27 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-May-18 21:55:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:55:27 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-May-18 21:55:27 LOG5 end_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2009-May-18 21:55:28 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-May-18 21:55:28 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 46.90 and ZA = 16.07 2009-May-18 21:55:28 LOG3 track_source: Calling 'track_source AGESVC1B_p3_076 46.90 16.0671230442 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-18 21:55:28 START begin_task: Starting task 'sending tracking commands' 2009-May-18 21:55:28 LOG5 begin_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2009-May-18 21:55:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_076} INFO {Slewing to source 'AGESVC1B_p3_076' ...} 2009-May-18 21:55:28 INFO1 track_source: Starting to track AGESVC1B_p3_076 2009-May-18 21:55:28 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_076" 2009-May-18 21:55:28 LOG3 vw_send: To DATATAKING: set ra 46.90 2009-May-18 21:55:28 LOG3 vw_send: To DATATAKING: set dec 16.0671230442 2009-May-18 21:55:28 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-18 21:55:28 LOG3 vw_send: To DATATAKING: pnt tr 46.90 16.0671230442 -CF 2009-May-18 21:55:28 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-18 21:55:28 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-18 21:55:28 LOG5 finish_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2009-May-18 21:55:28 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-18 21:55:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 21:55:28 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-18 21:55:28 LOG5 end_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2009-May-18 21:55:28 LOG1 fixed_driftmap: Parameters: HA = +00:46:59.8 Start = 13:16:30.1 LST = 13:15:56.5 diff = 33.6 secs 2009-May-18 21:55:28 INFO2 fixed_driftmap: Waiting 31.6 seconds for RA 12:29:30 2009-May-18 21:55:28 INFO2 lstwait: Waiting for 31.6 secs from LST 13:15:56 to LST 13:16:28 ... 2009-May-18 21:55:28 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.558820039950387 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-18 21:55:28 START begin_task: Starting task 'waiting on wait on LST' 2009-May-18 21:55:28 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2009-May-18 21:55:28 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_076" 2009-May-18 21:55:28 LOG4 got_cormsg: From DATATAKING: set ra 46.90 2009-May-18 21:55:28 LOG4 got_cormsg: From DATATAKING: set dec 16.0671230442 2009-May-18 21:55:28 LOG4 got_cormsg: From DATATAKING: vw% 46.90 2009-May-18 21:55:28 LOG4 got_cormsg: From DATATAKING: vw% 16.0671230442 2009-May-18 21:55:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 21:55:28 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-18 21:55:28 LOG4 got_cormsg: From DATATAKING: pnt tr 46.90 16.0671230442 -CF 2009-May-18 21:55:28 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-18 21:55:28 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2009-May-18 21:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 21:55:59 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-May-18 21:55:59 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2009-May-18 21:55:59 LOG4 lstwait: Finished waiting 0.44 seconds late 2009-May-18 21:55:59 INFO3 lstwait: Finished waiting 2009-May-18 21:55:59 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-18 21:55:59 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-May-18 21:56:00 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-May-18 21:56:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-May-18 21:56:00 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-May-18 21:56:00 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-May-18 21:56:00 START begin_task: Starting task 'WAPP spectral observation' 2009-May-18 21:56:00 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2009-May-18 21:56:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-May-18 21:56:00 INFO2 take_data: Starting WAPP scan: 913800217 2009-May-18 21:56:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-May-18 21:56:00 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-18 21:56:00 LOG5 begin_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2009-May-18 21:56:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 21:56:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6961.00 2009-May-18 21:56:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.135328 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 21:56:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.135328 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 21:56:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.135328 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 21:56:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.135328 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 21:56:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.135328 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 21:56:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.135328 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 21:56:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.135328 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 21:56:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.135328 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 21:56:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.135328 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 21:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 21:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 21:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:56:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:56:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.919 0.994 0.970 0.945 2009-May-18 21:56:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.112 1.084 1.001 1.023 2009-May-18 21:56:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.005 0.943 0.980 1.024 2009-May-18 21:56:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.109 0.934 0.135 2009-May-18 21:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-18 21:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 21:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 21:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 21:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad) 2009-May-18 21:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 21:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 21:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 21:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 21:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 21:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 21:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 21:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 21:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 21:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 21:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 21:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 21:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 21:57:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:57:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.995 0.973 0.946 2009-May-18 21:57:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.115 1.087 1.006 1.023 2009-May-18 21:57:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 0.946 0.982 1.023 2009-May-18 21:57:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.109 0.936 0.134 2009-May-18 21:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 21:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 21:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 21:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 21:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 21:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 21:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 21:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 21:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 21:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 21:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 21:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:58:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:58:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 0.997 0.974 0.945 2009-May-18 21:58:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.113 1.086 1.004 1.022 2009-May-18 21:58:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.013 0.944 0.981 1.020 2009-May-18 21:58:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 0.109 0.942 0.135 2009-May-18 21:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-May-18 21:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 21:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 21:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-May-18 21:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-May-18 21:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 21:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 21:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 21:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 21:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 21:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 21:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 21:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-May-18 21:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-May-18 21:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 21:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 21:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-May-18 21:59:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 21:59:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.956 1.037 0.979 0.951 2009-May-18 21:59:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.121 1.098 1.009 1.028 2009-May-18 21:59:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.019 0.952 0.988 1.027 2009-May-18 21:59:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.086 0.109 0.940 0.135 2009-May-18 21:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 21:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad) 2009-May-18 21:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.142 (still bad) 2009-May-18 21:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.155 (still bad) 2009-May-18 21:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.171 (still bad) 2009-May-18 21:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.191 (still bad) 2009-May-18 21:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.191 (still bad) 2009-May-18 21:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.187 (still bad) 2009-May-18 21:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.180 (still bad) 2009-May-18 21:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.163 (still bad) 2009-May-18 21:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.149 (still bad) 2009-May-18 21:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.137 (still bad) 2009-May-18 21:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2009-May-18 21:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 21:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 21:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 21:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2009-May-18 21:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad) 2009-May-18 21:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad) 2009-May-18 21:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-May-18 22:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 22:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-May-18 22:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 22:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:00:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 22:00:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.008 0.972 0.945 2009-May-18 22:00:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.114 1.090 1.006 1.024 2009-May-18 22:00:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.016 0.948 0.984 1.023 2009-May-18 22:00:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.109 0.933 0.134 2009-May-18 22:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 22:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 22:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-May-18 22:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 22:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2009-May-18 22:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-May-18 22:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-May-18 22:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.131 (still bad) 2009-May-18 22:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-May-18 22:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-May-18 22:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-May-18 22:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-May-18 22:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 22:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 22:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad) 2009-May-18 22:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad) 2009-May-18 22:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 22:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:01:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-May-18 22:01:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 1.000 0.974 0.945 2009-May-18 22:01:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.115 1.088 1.014 1.030 2009-May-18 22:01:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.018 0.949 0.983 1.020 2009-May-18 22:01:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.108 0.932 0.134 2009-May-18 22:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad) 2009-May-18 22:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-May-18 22:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad) 2009-May-18 22:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad) 2009-May-18 22:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-May-18 22:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad) 2009-May-18 22:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad) 2009-May-18 22:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad) 2009-May-18 22:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 22:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-May-18 22:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-May-18 22:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-May-18 22:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 22:02:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 22:02:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.997 0.972 0.942 2009-May-18 22:02:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.112 1.089 1.003 1.019 2009-May-18 22:02:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.012 0.946 0.976 1.014 2009-May-18 22:02:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.109 0.933 0.134 2009-May-18 22:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad) 2009-May-18 22:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad) 2009-May-18 22:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad) 2009-May-18 22:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad) 2009-May-18 22:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-May-18 22:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-May-18 22:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad) 2009-May-18 22:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-May-18 22:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad) 2009-May-18 22:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 22:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-May-18 22:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad) 2009-May-18 22:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-May-18 22:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad) 2009-May-18 22:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-May-18 22:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-May-18 22:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-May-18 22:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad) 2009-May-18 22:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-May-18 22:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad) 2009-May-18 22:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-May-18 22:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-May-18 22:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 22:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-May-18 22:03:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 22:03:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.920 0.997 0.974 0.941 2009-May-18 22:03:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.116 1.088 1.002 1.017 2009-May-18 22:03:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.012 0.944 0.979 1.015 2009-May-18 22:03:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.109 0.931 0.134 2009-May-18 22:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad) 2009-May-18 22:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 22:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-May-18 22:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 22:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 22:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2009-May-18 22:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 22:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad) 2009-May-18 22:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad) 2009-May-18 22:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 22:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-May-18 22:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-May-18 22:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad) 2009-May-18 22:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad) 2009-May-18 22:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad) 2009-May-18 22:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 22:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 22:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:04:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-May-18 22:04:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.998 0.975 0.942 2009-May-18 22:04:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.115 1.090 1.006 1.017 2009-May-18 22:04:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.016 0.947 0.978 1.015 2009-May-18 22:04:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.108 0.934 0.134 2009-May-18 22:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad) 2009-May-18 22:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad) 2009-May-18 22:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad) 2009-May-18 22:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad) 2009-May-18 22:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad) 2009-May-18 22:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad) 2009-May-18 22:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad) 2009-May-18 22:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad) 2009-May-18 22:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:05:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 22:05:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 1.001 0.974 0.942 2009-May-18 22:05:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.117 1.092 1.006 1.017 2009-May-18 22:05:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.014 0.943 0.982 1.020 2009-May-18 22:05:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.109 0.934 0.134 2009-May-18 22:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2009-May-18 22:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad) 2009-May-18 22:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2009-May-18 22:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2009-May-18 22:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad) 2009-May-18 22:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad) 2009-May-18 22:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2009-May-18 22:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2009-May-18 22:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:06:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-May-18 22:06:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.921 0.999 0.977 0.942 2009-May-18 22:06:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.116 1.091 1.005 1.016 2009-May-18 22:06:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 0.947 0.980 1.022 2009-May-18 22:06:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.108 0.933 0.134 2009-May-18 22:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad) 2009-May-18 22:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2009-May-18 22:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad) 2009-May-18 22:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-May-18 22:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.131 (still bad) 2009-May-18 22:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-May-18 22:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2009-May-18 22:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:07:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 22:07:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 1.002 0.976 0.944 2009-May-18 22:07:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.118 1.093 1.008 1.019 2009-May-18 22:07:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.018 0.949 0.983 1.020 2009-May-18 22:07:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 0.109 0.934 0.135 2009-May-18 22:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-May-18 22:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:08:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 22:08:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.931 1.008 0.987 0.956 2009-May-18 22:08:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.120 1.091 1.010 1.023 2009-May-18 22:08:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.025 0.954 0.981 1.020 2009-May-18 22:08:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.092 0.109 0.942 0.135 2009-May-18 22:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-May-18 22:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2009-May-18 22:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 22:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2009-May-18 22:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:09:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 22:09:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.928 1.005 0.981 0.949 2009-May-18 22:09:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.122 1.091 1.013 1.028 2009-May-18 22:09:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.021 0.951 0.991 1.032 2009-May-18 22:09:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 0.109 0.944 0.135 2009-May-18 22:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2009-May-18 22:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-May-18 22:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2009-May-18 22:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2009-May-18 22:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2009-May-18 22:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:10:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 22:10:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 1.002 0.979 0.947 2009-May-18 22:10:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.121 1.090 1.012 1.023 2009-May-18 22:10:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.018 0.950 0.987 1.025 2009-May-18 22:10:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 0.109 0.940 0.134 2009-May-18 22:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-May-18 22:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-May-18 22:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-May-18 22:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:11:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 22:11:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.923 0.997 0.975 0.941 2009-May-18 22:11:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.117 1.085 1.007 1.018 2009-May-18 22:11:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.016 0.944 0.981 1.019 2009-May-18 22:11:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 0.109 0.935 0.134 2009-May-18 22:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-May-18 22:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2009-May-18 22:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2009-May-18 22:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 22:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2009-May-18 22:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:12:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 22:12:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.922 0.997 0.976 0.944 2009-May-18 22:12:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.117 1.087 1.008 1.020 2009-May-18 22:12:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.015 0.944 0.982 1.020 2009-May-18 22:12:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 0.109 0.935 0.134 2009-May-18 22:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2009-May-18 22:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2009-May-18 22:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:12:59 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 22:12:59.301 (seconds: 79979.301)!} 2009-May-18 22:12:59 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 22:12:59.301 (seconds: 79979.301)! 2009-May-18 22:13:00 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 79978.0 to 79979.0! 2009-May-18 22:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:13:01 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (79978.0 - 79980.0)! 2009-May-18 22:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2009-May-18 22:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2009-May-18 22:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2009-May-18 22:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:13:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 22:13:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.924 1.003 0.975 0.945 2009-May-18 22:13:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.119 1.091 1.010 1.023 2009-May-18 22:13:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.019 0.950 0.983 1.020 2009-May-18 22:13:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 0.109 0.936 0.134 2009-May-18 22:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-May-18 22:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-May-18 22:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad) 2009-May-18 22:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-May-18 22:14:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 22:14:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.926 1.003 0.977 0.945 2009-May-18 22:14:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.123 1.098 1.009 1.024 2009-May-18 22:14:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.021 0.951 0.982 1.026 2009-May-18 22:14:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 0.109 0.935 0.134 2009-May-18 22:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-May-18 22:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-May-18 22:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad) 2009-May-18 22:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-18 22:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-May-18 22:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-18 22:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-18 22:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2009-May-18 22:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-May-18 22:15:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 22:15:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.930 1.004 0.977 0.945 2009-May-18 22:15:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.118 1.094 1.008 1.023 2009-May-18 22:15:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.024 0.953 0.985 1.025 2009-May-18 22:15:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.086 0.109 0.937 0.135 2009-May-18 22:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad) 2009-May-18 22:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 22:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-18 22:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2009-May-18 22:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad) 2009-May-18 22:16:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:16:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-18 22:16:01 LOG5 end_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2009-May-18 22:16:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-18 22:16:01 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2009-May-18 22:16:01 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-May-18 22:16:01 LOG5 finish_task: Level: (2) ID = <10205> Status = 0 0 0 0 ok 2009-May-18 22:16:01 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-May-18 22:16:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-18 22:16:01 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-May-18 22:16:01 LOG5 end_task: Level: (2) ID = <10205> Status = 0 0 0 0 ok 2009-May-18 22:16:01 COMMAND run_command_line: EXECUTING command 47: 'ENDIF' 2009-May-18 22:16:01 NOTE run_command_file: DONE with command file processing 2009-May-18 22:16:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-May-18 22:16:01 STOP finish_task: Finishing task 'running command file '090518.cmd'' 2009-May-18 22:16:01 LOG5 finish_task: Level: (1) ID = <10021> Status = 0 0 0 0 ok 2009-May-18 22:16:01 DONE finish_task: DONE finished running: command file '090518.cmd' 2009-May-18 22:16:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-18 22:16:01 END end_task: Finishing task 'running command file '090518.cmd'' with status 'OK' 2009-May-18 22:16:01 LOG5 end_task: Level: (1) ID = <10021> Status = 0 0 0 0 ok 2009-May-18 22:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:16:21 INFO1 CIMA-run_command_file: Transferring command file 'command_galfacurpos.cmd ' to executive ... 2009-May-18 22:16:21 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 7 {LOAD togs_ages.conf} 2009-May-18 22:16:21 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 8 {TRACKCURPOS} 2009-May-18 22:16:21 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 9 {ALFAANGLE 19} 2009-May-18 22:16:21 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2009-May-18 22:16:21 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-May-18 22:16:21 LOG4 exec_msg: From OBSERVER: run_command_file command_galfacurpos.cmd 1 1 4 2009-May-18 22:16:21 LOG4 run_command_file: Calling 'run_command_file command_galfacurpos.cmd 1 1 4' 2009-May-18 22:16:21 BEGIN begin_task: Starting task 'running command file 'command_galfacurpos.cmd'' 2009-May-18 22:16:21 LOG5 begin_task: Level: (1) ID = <10240> Status = 0 0 0 0 ok 2009-May-18 22:16:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfacurpos.cmd' ...} 2009-May-18 22:16:21 NOTE run_command_file: Starting execution of command file 'command_galfacurpos.cmd' from line 1 2009-May-18 22:16:21 COMMAND run_command_line: EXECUTING command 7: 'LOAD togs_ages.conf' 2009-May-18 22:16:21 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-May-18 22:16:21 NOTE CIMA-check_config_file: File 'togs_ages.conf' contains a observing mode set-up which will be ignored! 2009-May-18 22:16:21 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-18 22:16:21 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-May-18 22:16:22 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-May-18 22:16:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-May-18 22:16:23 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-18 22:16:23 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-May-18 22:16:23 LOG5 begin_task: Level: (2) ID = <10241> Status = 0 0 0 0 ok 2009-May-18 22:16:24 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-May-18 22:16:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-May-18 22:16:24 LOG1 config_iflo: Receiver ALFA already selected 2009-May-18 22:16:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 22:16:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-18 22:16:24 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 22:16:24 LOG5 begin_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2009-May-18 22:16:24 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 22:16:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 22:16:24 LOG5 end_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2009-May-18 22:16:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 22:16:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-18 22:16:24 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-May-18 22:16:24 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-May-18 22:16:24 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-May-18 22:16:24 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-May-18 22:16:24 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-May-18 22:16:24 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-May-18 22:16:24 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-May-18 22:16:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2009-May-18 22:16:24 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-May-18 22:16:24 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-May-18 22:16:24 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-May-18 22:16:24 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-May-18 22:16:24 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-May-18 22:16:24 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-May-18 22:16:24 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-May-18 22:16:24 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-May-18 22:16:24 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-May-18 22:16:24 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-May-18 22:16:24 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-May-18 22:16:24 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-May-18 22:16:24 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-May-18 22:16:24 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-May-18 22:16:24 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-May-18 22:16:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:16:24 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-May-18 22:16:24 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-May-18 22:16:24 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-May-18 22:16:24 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-May-18 22:16:24 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-May-18 22:16:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-May-18 22:16:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 22:16:24 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-May-18 22:16:24 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2009-May-18 22:16:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2009-May-18 22:16:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-May-18 22:16:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:16:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 22:16:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:16:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:16:25 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-May-18 22:16:25 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-May-18 22:16:25 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2009-May-18 22:16:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-May-18 22:16:25 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-May-18 22:16:25 LOG5 finish_task: Level: (2) ID = <10241> Status = 0 0 0 0 ok 2009-May-18 22:16:25 DONE finish_task: DONE finished configuration: IF/LO path 2009-May-18 22:16:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-18 22:16:25 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-May-18 22:16:25 LOG5 end_task: Level: (2) ID = <10241> Status = 0 0 0 0 ok 2009-May-18 22:16:25 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-May-18 22:16:25 LOG5 begin_task: Level: (2) ID = <10244> Status = 0 0 0 0 ok 2009-May-18 22:16:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-May-18 22:16:25 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-May-18 22:16:25 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-May-18 22:16:25 START begin_task: Starting task 'selecting calibration port' 2009-May-18 22:16:25 LOG5 begin_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2009-May-18 22:16:25 LOG3 vw_send: To DATATAKING: calport 3 2009-May-18 22:16:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-May-18 22:16:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 22:16:25 START begin_task: Starting task 'waiting on calport' 2009-May-18 22:16:25 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2009-May-18 22:16:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:16:26 LOG4 got_cormsg: From DATATAKING: calport 3 2009-May-18 22:16:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 22:16:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:16:26 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 22:16:26 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-May-18 22:16:26 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2009-May-18 22:16:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-May-18 22:16:26 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-May-18 22:16:26 LOG5 end_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2009-May-18 22:16:26 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-18 22:16:26 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-18 22:16:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-18 22:16:26 LOG5 begin_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2009-May-18 22:16:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:16:26 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-18 22:16:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-18 22:16:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-18 22:16:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-18 22:16:26 LOG5 end_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2009-May-18 22:16:26 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-May-18 22:16:26 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-May-18 22:16:26 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-May-18 22:16:26 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-May-18 22:16:26 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-May-18 22:16:26 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-May-18 22:16:26 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-May-18 22:16:26 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-May-18 22:16:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-May-18 22:16:26 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-May-18 22:16:26 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-May-18 22:16:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-May-18 22:16:26 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-May-18 22:16:26 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-May-18 22:16:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-18 22:16:26 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2009-May-18 22:16:26 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-18 22:16:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-May-18 22:16:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-18 22:16:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-May-18 22:16:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-18 22:16:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-18 22:16:26 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2009-May-18 22:16:26 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-May-18 22:16:26 STOP finish_task: Finishing task 'configuring WAPPs' 2009-May-18 22:16:26 LOG5 finish_task: Level: (2) ID = <10244> Status = 0 0 0 0 ok 2009-May-18 22:16:26 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-May-18 22:16:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-18 22:16:26 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-May-18 22:16:26 LOG5 end_task: Level: (2) ID = <10244> Status = 0 0 0 0 ok 2009-May-18 22:16:26 COMMAND run_command_line: EXECUTING command 8: 'TRACKCURPOS' 2009-May-18 22:16:26 BEGIN begin_task: Starting task 'tracking current position' 2009-May-18 22:16:26 LOG5 begin_task: Level: (2) ID = <10249> Status = 0 0 0 0 ok 2009-May-18 22:16:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2009-May-18 22:16:27 INFO1 track_current_pos: Starting to track the current commanded position RA = 12:49:29.7 and Dec = +07:07:28.0 2009-May-18 22:16:27 LOG3 track_source: Calling 'track_source Cur-pos 124929.7 070728.0 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-May-18 22:16:27 START begin_task: Starting task 'sending tracking commands' 2009-May-18 22:16:27 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2009-May-18 22:16:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2009-May-18 22:16:27 INFO1 track_source: Starting to track Cur-pos 2009-May-18 22:16:27 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2009-May-18 22:16:27 LOG3 vw_send: To DATATAKING: set ra 124929.7 2009-May-18 22:16:27 LOG3 vw_send: To DATATAKING: set dec 070728.0 2009-May-18 22:16:27 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-18 22:16:27 LOG3 vw_send: To DATATAKING: pnt tr 124929.7 070728.0 -CJ 2009-May-18 22:16:27 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-May-18 22:16:27 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-18 22:16:27 LOG5 finish_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2009-May-18 22:16:27 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-18 22:16:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 22:16:27 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-18 22:16:27 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2009-May-18 22:16:27 START begin_task: Starting task 'waiting on telescope' 2009-May-18 22:16:27 LOG5 begin_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2009-May-18 22:16:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-18 22:16:27 LOG3 waittrk: Start waittrk 5 2009-May-18 22:16:27 START begin_task: Starting task 'waiting on telescope movement' 2009-May-18 22:16:27 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2009-May-18 22:16:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-May-18 22:16:27 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-May-18 22:16:27 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2009-May-18 22:16:27 LOG4 got_cormsg: From DATATAKING: set ra 124929.7 2009-May-18 22:16:27 LOG4 got_cormsg: From DATATAKING: set dec 070728.0 2009-May-18 22:16:27 LOG4 got_cormsg: From DATATAKING: vw% 124929.7 2009-May-18 22:16:27 LOG4 got_cormsg: From DATATAKING: vw% 070728.0 2009-May-18 22:16:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:16:27 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-18 22:16:27 LOG4 got_cormsg: From DATATAKING: pnt tr 124929.7 070728.0 -CJ 2009-May-18 22:16:27 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-May-18 22:16:27 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-18 22:16:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:16:32 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-18 22:16:32 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2009-May-18 22:16:32 START begin_task: Starting task 'waiting on telescope on source' 2009-May-18 22:16:32 LOG5 begin_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2009-May-18 22:16:35 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-18 22:16:35 LOG5 end_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2009-May-18 22:16:35 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-18 22:16:35 INFO2 waittrk: Now tracking Cur-pos 2009-May-18 22:16:35 LOG4 waittrk: Current telescope position: Az = 406.76 ZA = 16.08 2009-May-18 22:16:35 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-18 22:16:35 LOG5 finish_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2009-May-18 22:16:35 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-18 22:16:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 22:16:35 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-18 22:16:35 LOG5 end_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2009-May-18 22:16:35 STOP finish_task: Finishing task 'tracking current position' 2009-May-18 22:16:35 LOG5 finish_task: Level: (2) ID = <10249> Status = 0 0 0 0 ok 2009-May-18 22:16:35 DONE finish_task: DONE finished tracking: current position 2009-May-18 22:16:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-18 22:16:35 END end_task: Finishing task 'tracking current position' with status 'OK' 2009-May-18 22:16:35 LOG5 end_task: Level: (2) ID = <10249> Status = 0 0 0 0 ok 2009-May-18 22:16:35 COMMAND run_command_line: EXECUTING command 9: 'ALFAANGLE 19' 2009-May-18 22:16:35 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-May-18 22:16:35 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-May-18 22:16:35 LOG5 begin_task: Level: (2) ID = <10254> Status = 0 0 0 0 ok 2009-May-18 22:16:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-May-18 22:16:35 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-May-18 22:16:35 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-May-18 22:16:35 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-May-18 22:16:35 START begin_task: Starting task 'waiting on ALFA rotation' 2009-May-18 22:16:35 LOG5 begin_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2009-May-18 22:16:58 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-May-18 22:16:58 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-May-18 22:16:58 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-May-18 22:16:58 LOG5 end_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2009-May-18 22:16:58 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-18 22:16:58 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-May-18 22:16:58 LOG5 finish_task: Level: (2) ID = <10254> Status = 0 0 0 0 ok 2009-May-18 22:16:58 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-May-18 22:16:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-18 22:16:58 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-May-18 22:16:58 LOG5 end_task: Level: (2) ID = <10254> Status = 0 0 0 0 ok 2009-May-18 22:16:58 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2009-May-18 22:16:59 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-May-18 22:17:02 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-18 22:17:02 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2009-May-18 22:17:02 BEGIN begin_task: Starting task 'smart frequency switching' 2009-May-18 22:17:02 LOG5 begin_task: Level: (2) ID = <10256> Status = 0 0 0 0 ok 2009-May-18 22:17:02 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2009-May-18 22:17:02 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-May-18 22:17:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-May-18 22:17:02 START begin_task: Starting task 'selecting calibration type' 2009-May-18 22:17:02 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2009-May-18 22:17:02 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-18 22:17:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-18 22:17:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 22:17:02 START begin_task: Starting task 'waiting on setcal' 2009-May-18 22:17:02 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2009-May-18 22:17:02 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-18 22:17:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 22:17:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:17:02 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 22:17:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-18 22:17:02 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2009-May-18 22:17:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-18 22:17:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 22:17:02 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-18 22:17:02 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 22:17:02 LOG5 begin_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2009-May-18 22:17:02 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 22:17:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 22:17:02 LOG5 end_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2009-May-18 22:17:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 22:17:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-18 22:17:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-18 22:17:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-18 22:17:02 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-18 22:17:02 LOG5 begin_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2009-May-18 22:17:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:17:02 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-18 22:17:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-18 22:17:02 LOG5 end_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2009-May-18 22:17:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-18 22:17:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-18 22:17:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-18 22:17:02 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2009-May-18 22:17:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-May-18 22:17:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-May-18 22:17:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-May-18 22:17:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-May-18 22:17:02 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-May-18 22:17:03 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-May-18 22:17:03 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-May-18 22:17:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-18 22:17:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-18 22:17:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-18 22:17:03 LOG5 begin_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2009-May-18 22:17:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-May-18 22:17:03 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-18 22:17:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-18 22:17:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-18 22:17:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-18 22:17:03 LOG5 end_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2009-May-18 22:17:03 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-May-18 22:17:03 START begin_task: Starting task 'adjusting WAPP power' 2009-May-18 22:17:03 LOG5 begin_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2009-May-18 22:17:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-May-18 22:17:03 INFO2 adjust_power: Starting to adjust WAPP power 2009-May-18 22:17:03 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-May-18 22:17:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-May-18 22:17:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-18 22:17:03 START begin_task: Starting task 'waiting on adjpwrif2' 2009-May-18 22:17:03 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2009-May-18 22:17:03 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-May-18 22:17:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-18 22:17:03 NOTE WAPPDATA-new_file: New FITS file: wapp.20090518.a2048.0006.fits 2009-May-18 22:17:03 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090518.a2048.0006.fits} 2009-May-18 22:17:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:17:06 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-18 22:17:06 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-May-18 22:17:06 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2009-May-18 22:17:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-May-18 22:17:06 START begin_task: Starting task 'adjusting WAPP power' 2009-May-18 22:17:06 LOG5 begin_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2009-May-18 22:17:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-May-18 22:17:06 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 22:17:06 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 22:17:06 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 22:17:06 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-May-18 22:17:06 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-May-18 22:17:06 LOG5 begin_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2009-May-18 22:17:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-May-18 22:17:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:17:06 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 7 dB 2009-May-18 22:17:06 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 4 dB 2009-May-18 22:17:06 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2009-May-18 22:17:06 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 4 0 dB 2009-May-18 22:17:06 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-May-18 22:17:06 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-May-18 22:17:06 LOG5 end_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2009-May-18 22:17:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.924 1.032 ALFA beam 1: 1.002 0.998 2009-May-18 22:17:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.112 1.106 ALFA beam 3: 0.984 1.024 2009-May-18 22:17:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.034 0.984 ALFA beam 5: 0.980 1.039 2009-May-18 22:17:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.044 0.109 ALFA beam 7: 0.899 0.135 2009-May-18 22:17:06 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-18 22:17:06 LOG5 finish_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2009-May-18 22:17:06 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-May-18 22:17:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 22:17:06 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-18 22:17:06 LOG5 end_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2009-May-18 22:17:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-18 22:17:06 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-18 22:17:06 LOG5 finish_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2009-May-18 22:17:06 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-May-18 22:17:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-18 22:17:06 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-18 22:17:06 LOG5 end_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2009-May-18 22:17:06 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2009-May-18 22:17:06 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2009-May-18 22:17:06 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-May-18 22:17:06 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:17:06 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:17:06 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:17:06 LOG2 antvel: Parameters to Doppler: Topocentric 94626 2009 138 0.0 2009-May-18 22:17:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:17:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-May-18 22:17:06 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-May-18 22:17:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:17:06 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:17:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-May-18 22:17:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:17:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-18 22:17:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:17:07 LOG5 begin_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2009-May-18 22:17:07 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.627510 2009.3803656171572 18.999933 2009-May-18 22:17:07 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666665 7.124444444444424 2009-May-18 22:17:07 LOG4 log_alfabeam: ALFABEAM 1 12.829039274767002 7.211055942797233 2009-May-18 22:17:07 LOG4 log_alfabeam: ALFABEAM 2 12.822450059362676 7.209955638028849 2009-May-18 22:17:07 LOG4 log_alfabeam: ALFABEAM 3 12.818308091640509 7.123534266526713 2009-May-18 22:17:07 LOG4 log_alfabeam: ALFABEAM 4 12.820806967893924 7.037683239608371 2009-May-18 22:17:07 LOG4 log_alfabeam: ALFABEAM 5 12.827420814052566 7.038995556924808 2009-May-18 22:17:07 LOG4 log_alfabeam: ALFABEAM 6 12.831511078053387 7.125945419414317 2009-May-18 22:17:07 INFO2 take_data: Starting WAPP+GALFA scan: 913800218 2009-May-18 22:17:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:17:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:17:07 LOG5 begin_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2009-May-18 22:17:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:17:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-May-18 22:17:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:17:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:17:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:17:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8228.00 2009-May-18 22:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:17:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 22:17:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.974 1.074 1.053 1.024 2009-May-18 22:17:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.139 1.151 1.058 1.058 2009-May-18 22:17:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 1.013 1.056 1.091 2009-May-18 22:17:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.109 0.899 0.135 2009-May-18 22:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.146 (still bad) 2009-May-18 22:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.148 (still bad) 2009-May-18 22:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.150 (still bad) 2009-May-18 22:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.147 (still bad) 2009-May-18 22:17:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:17:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:17:18 LOG5 end_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2009-May-18 22:17:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:17:18 LOG5 end_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2009-May-18 22:17:18 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2009-May-18 22:17:18 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2009-May-18 22:17:18 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2009-May-18 22:17:18 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:17:18 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:17:18 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:17:18 LOG2 antvel: Parameters to Doppler: Topocentric 94638 2009 138 0.0 2009-May-18 22:17:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:17:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2009-May-18 22:17:18 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2009-May-18 22:17:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:17:18 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:17:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2009-May-18 22:17:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:17:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-18 22:17:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:17:18 LOG5 begin_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2009-May-18 22:17:18 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.630853 2009.3803659974142 18.999933 2009-May-18 22:17:18 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666667 7.124444444444443 2009-May-18 22:17:18 LOG4 log_alfabeam: ALFABEAM 1 12.829050980278634 7.210932287343895 2009-May-18 22:17:18 LOG4 log_alfabeam: ALFABEAM 2 12.822461598669062 7.210029370269865 2009-May-18 22:17:18 LOG4 log_alfabeam: ALFABEAM 3 12.818307996337854 7.123731767564456 2009-May-18 22:17:18 LOG4 log_alfabeam: ALFABEAM 4 12.820795219573494 7.037806831540612 2009-May-18 22:17:18 LOG4 log_alfabeam: ALFABEAM 5 12.827409199310809 7.038920552417049 2009-May-18 22:17:18 LOG4 log_alfabeam: ALFABEAM 6 12.831511282692381 7.125746946209343 2009-May-18 22:17:18 INFO2 take_data: Starting WAPP+GALFA scan: 913800219 2009-May-18 22:17:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:17:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:17:19 LOG5 begin_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2009-May-18 22:17:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:17:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2009-May-18 22:17:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:17:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:17:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.148 (still bad) 2009-May-18 22:17:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8240.00 2009-May-18 22:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-May-18 22:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad) 2009-May-18 22:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad) 2009-May-18 22:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad) 2009-May-18 22:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad) 2009-May-18 22:17:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:17:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:17:30 LOG5 end_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2009-May-18 22:17:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:17:30 LOG5 end_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2009-May-18 22:17:30 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2009-May-18 22:17:30 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2009-May-18 22:17:30 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2009-May-18 22:17:30 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:17:30 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:17:30 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:17:30 LOG2 antvel: Parameters to Doppler: Topocentric 94650 2009 138 0.0 2009-May-18 22:17:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:17:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2009-May-18 22:17:30 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2009-May-18 22:17:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:17:30 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:17:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2009-May-18 22:17:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:17:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-18 22:17:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:17:30 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2009-May-18 22:17:30 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.634195 2009.3803663776712 18.999933 2009-May-18 22:17:30 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666661 7.124444444444440 2009-May-18 22:17:30 LOG4 log_alfabeam: ALFABEAM 1 12.829062612989617 7.210808877412495 2009-May-18 22:17:30 LOG4 log_alfabeam: ALFABEAM 2 12.822473092414072 7.210102406290466 2009-May-18 22:17:30 LOG4 log_alfabeam: ALFABEAM 3 12.818307927980250 7.123928321735319 2009-May-18 22:17:30 LOG4 log_alfabeam: ALFABEAM 4 12.820783544215523 7.037930181049774 2009-May-18 22:17:30 LOG4 log_alfabeam: ALFABEAM 5 12.827397630109930 7.038846254759517 2009-May-18 22:17:30 LOG4 log_alfabeam: ALFABEAM 6 12.831511459617102 7.125549417090805 2009-May-18 22:17:30 INFO2 take_data: Starting WAPP+GALFA scan: 913800220 2009-May-18 22:17:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:17:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:17:31 LOG5 begin_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2009-May-18 22:17:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:17:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2009-May-18 22:17:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:17:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:17:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:17:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8252.00 2009-May-18 22:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad) 2009-May-18 22:17:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:17:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:17:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:17:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:17:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:17:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:17:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:17:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:17:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2009-May-18 22:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2009-May-18 22:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad) 2009-May-18 22:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad) 2009-May-18 22:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad) 2009-May-18 22:17:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:17:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:17:42 LOG5 end_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2009-May-18 22:17:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:17:42 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2009-May-18 22:17:42 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2009-May-18 22:17:42 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2009-May-18 22:17:42 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2009-May-18 22:17:42 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:17:42 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:17:42 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:17:42 LOG2 antvel: Parameters to Doppler: Topocentric 94662 2009 138 0.0 2009-May-18 22:17:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:17:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2009-May-18 22:17:42 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2009-May-18 22:17:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:17:42 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:17:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2009-May-18 22:17:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:17:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-18 22:17:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:17:42 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2009-May-18 22:17:42 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.637537 2009.3803667579284 18.999933 2009-May-18 22:17:42 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666665 7.124444444444440 2009-May-18 22:17:42 LOG4 log_alfabeam: ALFABEAM 1 12.829074176824401 7.210685678683454 2009-May-18 22:17:42 LOG4 log_alfabeam: ALFABEAM 2 12.822484544109384 7.210174774056533 2009-May-18 22:17:42 LOG4 log_alfabeam: ALFABEAM 3 12.818307886175941 7.124123991417592 2009-May-18 22:17:42 LOG4 log_alfabeam: ALFABEAM 4 12.820771937883109 7.038053322400589 2009-May-18 22:17:42 LOG4 log_alfabeam: ALFABEAM 5 12.827386102920164 7.038772635541629 2009-May-18 22:17:42 LOG4 log_alfabeam: ALFABEAM 6 12.831511609255722 7.125352769479472 2009-May-18 22:17:42 INFO2 take_data: Starting WAPP+GALFA scan: 913800221 2009-May-18 22:17:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:17:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:17:43 LOG5 begin_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2009-May-18 22:17:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:17:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2009-May-18 22:17:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:17:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:17:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:17:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8264.00 2009-May-18 22:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad) 2009-May-18 22:17:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:17:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:17:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:17:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:17:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:17:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:17:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:17:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:17:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad) 2009-May-18 22:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad) 2009-May-18 22:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad) 2009-May-18 22:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad) 2009-May-18 22:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad) 2009-May-18 22:17:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:17:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:17:54 LOG5 end_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2009-May-18 22:17:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:17:54 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2009-May-18 22:17:54 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2009-May-18 22:17:54 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2009-May-18 22:17:54 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2009-May-18 22:17:54 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:17:54 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:17:54 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:17:54 LOG2 antvel: Parameters to Doppler: Topocentric 94674 2009 138 0.0 2009-May-18 22:17:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:17:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2009-May-18 22:17:54 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2009-May-18 22:17:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:17:54 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:17:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2009-May-18 22:17:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:17:54 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-18 22:17:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:17:54 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2009-May-18 22:17:54 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.640880 2009.3803671381854 18.999933 2009-May-18 22:17:54 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666670 7.124444444444439 2009-May-18 22:17:54 LOG4 log_alfabeam: ALFABEAM 1 12.829085675623750 7.210562657031454 2009-May-18 22:17:54 LOG4 log_alfabeam: ALFABEAM 2 12.822495957218718 7.210246500693569 2009-May-18 22:17:54 LOG4 log_alfabeam: ALFABEAM 3 12.818307870568592 7.124318837948411 2009-May-18 22:17:54 LOG4 log_alfabeam: ALFABEAM 4 12.820760396723212 7.038176289667470 2009-May-18 22:17:54 LOG4 log_alfabeam: ALFABEAM 5 12.827374614259599 7.038699667205423 2009-May-18 22:17:54 LOG4 log_alfabeam: ALFABEAM 6 12.831511732000086 7.125156941832320 2009-May-18 22:17:54 INFO2 take_data: Starting WAPP+GALFA scan: 913800222 2009-May-18 22:17:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:17:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:17:55 LOG5 begin_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2009-May-18 22:17:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:17:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2009-May-18 22:17:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:17:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:17:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:17:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8276.00 2009-May-18 22:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad) 2009-May-18 22:17:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:17:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:17:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:17:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:17:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:17:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:17:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:17:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:17:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-18 22:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:18:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:18:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:18:06 LOG5 end_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2009-May-18 22:18:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:18:06 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2009-May-18 22:18:06 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2009-May-18 22:18:06 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2009-May-18 22:18:06 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2009-May-18 22:18:06 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:18:06 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:18:06 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:18:06 LOG2 antvel: Parameters to Doppler: Topocentric 94686 2009 138 0.0 2009-May-18 22:18:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:18:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2009-May-18 22:18:06 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2009-May-18 22:18:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:18:06 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:18:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2009-May-18 22:18:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:18:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-18 22:18:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:18:06 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2009-May-18 22:18:06 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.644222 2009.3803675184424 18.999933 2009-May-18 22:18:06 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666665 7.124444444444435 2009-May-18 22:18:06 LOG4 log_alfabeam: ALFABEAM 1 12.829097102918441 7.210439888640998 2009-May-18 22:18:06 LOG4 log_alfabeam: ALFABEAM 2 12.822507324972248 7.210317549019118 2009-May-18 22:18:06 LOG4 log_alfabeam: ALFABEAM 3 12.818307880815500 7.124512747959296 2009-May-18 22:18:06 LOG4 log_alfabeam: ALFABEAM 4 12.820748927230692 7.038299006663593 2009-May-18 22:18:06 LOG4 log_alfabeam: ALFABEAM 5 12.827363170947532 7.038627387613563 2009-May-18 22:18:06 LOG4 log_alfabeam: ALFABEAM 6 12.831511828132401 7.124962048191693 2009-May-18 22:18:06 INFO2 take_data: Starting WAPP+GALFA scan: 913800223 2009-May-18 22:18:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:18:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:18:07 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2009-May-18 22:18:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:18:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2009-May-18 22:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:18:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:18:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:18:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:18:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8288.00 2009-May-18 22:18:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:18:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:18:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:18:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:18:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:18:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:18:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:18:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:18:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-18 22:18:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 22:18:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 1.043 1.008 1.001 2009-May-18 22:18:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.118 1.118 0.989 1.034 2009-May-18 22:18:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.043 0.993 0.984 1.053 2009-May-18 22:18:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.109 0.902 0.135 2009-May-18 22:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-18 22:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-18 22:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-18 22:18:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:18:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:18:18 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2009-May-18 22:18:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:18:18 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2009-May-18 22:18:18 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2009-May-18 22:18:18 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2009-May-18 22:18:18 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2009-May-18 22:18:18 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:18:18 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:18:18 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:18:18 LOG2 antvel: Parameters to Doppler: Topocentric 94698 2009 138 0.0 2009-May-18 22:18:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:18:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2009-May-18 22:18:18 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2009-May-18 22:18:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:18:18 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:18:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2009-May-18 22:18:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:18:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-18 22:18:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:18:18 LOG5 begin_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2009-May-18 22:18:18 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.647565 2009.3803678986994 18.999933 2009-May-18 22:18:18 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666670 7.124444444444438 2009-May-18 22:18:18 LOG4 log_alfabeam: ALFABEAM 1 12.829108465956086 7.210317302570944 2009-May-18 22:18:18 LOG4 log_alfabeam: ALFABEAM 2 12.822518654233514 7.210387967242476 2009-May-18 22:18:18 LOG4 log_alfabeam: ALFABEAM 3 12.818307916574229 7.124705840713355 2009-May-18 22:18:18 LOG4 log_alfabeam: ALFABEAM 4 12.820737522133058 7.038421544264783 2009-May-18 22:18:18 LOG4 log_alfabeam: ALFABEAM 5 12.827351766079518 7.038555747757290 2009-May-18 22:18:18 LOG4 log_alfabeam: ALFABEAM 6 12.831511898062402 7.124767968791604 2009-May-18 22:18:18 INFO2 take_data: Starting WAPP+GALFA scan: 913800224 2009-May-18 22:18:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:18:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:18:19 LOG5 begin_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2009-May-18 22:18:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:18:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2009-May-18 22:18:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:18:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:18:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-18 22:18:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8300.00 2009-May-18 22:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-18 22:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-May-18 22:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-18 22:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-May-18 22:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-18 22:18:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:18:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:18:30 LOG5 end_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2009-May-18 22:18:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:18:30 LOG5 end_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2009-May-18 22:18:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-May-18 22:18:30 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-May-18 22:18:30 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-May-18 22:18:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-18 22:18:30 LOG5 begin_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2009-May-18 22:18:30 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-18 22:18:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-May-18 22:18:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-18 22:18:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-18 22:18:30 LOG5 end_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2009-May-18 22:18:30 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2009-May-18 22:18:30 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2009-May-18 22:18:30 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-May-18 22:18:30 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:18:30 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:18:30 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:18:30 LOG2 antvel: Parameters to Doppler: Topocentric 94710 2009 138 0.0 2009-May-18 22:18:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:18:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-May-18 22:18:30 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-May-18 22:18:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:18:30 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:18:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-May-18 22:18:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:18:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-18 22:18:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:18:30 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2009-May-18 22:18:30 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.650907 2009.3803682789564 18.999933 2009-May-18 22:18:30 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666665 7.124444444444443 2009-May-18 22:18:30 LOG4 log_alfabeam: ALFABEAM 1 12.829119758346039 7.210194974631751 2009-May-18 22:18:30 LOG4 log_alfabeam: ALFABEAM 2 12.822529938287330 7.210457718882953 2009-May-18 22:18:30 LOG4 log_alfabeam: ALFABEAM 3 12.818307977478499 7.124898003922772 2009-May-18 22:18:30 LOG4 log_alfabeam: ALFABEAM 4 12.820726187846349 7.038543826655233 2009-May-18 22:18:30 LOG4 log_alfabeam: ALFABEAM 5 12.827340406420113 7.038484784785556 2009-May-18 22:18:30 LOG4 log_alfabeam: ALFABEAM 6 12.831511942096748 7.124574816594628 2009-May-18 22:18:30 INFO2 take_data: Starting WAPP+GALFA scan: 913800225 2009-May-18 22:18:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:18:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:18:31 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2009-May-18 22:18:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:18:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-May-18 22:18:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:18:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:18:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:18:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8312.00 2009-May-18 22:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-18 22:18:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:18:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:18:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:18:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:18:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:18:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:18:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:18:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:18:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.485 (still bad) 2009-May-18 22:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.566 (still bad) 2009-May-18 22:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.566 (still bad) 2009-May-18 22:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.573 (still bad) 2009-May-18 22:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.563 (still bad) 2009-May-18 22:18:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:18:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:18:42 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2009-May-18 22:18:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:18:42 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2009-May-18 22:18:42 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2009-May-18 22:18:42 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2009-May-18 22:18:42 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2009-May-18 22:18:42 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:18:42 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:18:42 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:18:42 LOG2 antvel: Parameters to Doppler: Topocentric 94722 2009 138 0.0 2009-May-18 22:18:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:18:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2009-May-18 22:18:42 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2009-May-18 22:18:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:18:42 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:18:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2009-May-18 22:18:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:18:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-18 22:18:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:18:42 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2009-May-18 22:18:42 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.654250 2009.3803686592137 18.999933 2009-May-18 22:18:42 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666665 7.124444444444446 2009-May-18 22:18:42 LOG4 log_alfabeam: ALFABEAM 1 12.829130987252475 7.210072834033841 2009-May-18 22:18:42 LOG4 log_alfabeam: ALFABEAM 2 12.822541183951495 7.210526851292767 2009-May-18 22:18:42 LOG4 log_alfabeam: ALFABEAM 3 12.818308063223320 7.125089355835306 2009-May-18 22:18:42 LOG4 log_alfabeam: ALFABEAM 4 12.820714917181631 7.038665924563285 2009-May-18 22:18:42 LOG4 log_alfabeam: ALFABEAM 5 12.827329085110406 7.038414450558578 2009-May-18 22:18:42 LOG4 log_alfabeam: ALFABEAM 6 12.831511960606900 7.124382472844534 2009-May-18 22:18:42 INFO2 take_data: Starting WAPP+GALFA scan: 913800226 2009-May-18 22:18:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:18:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:18:43 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2009-May-18 22:18:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:18:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2009-May-18 22:18:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:18:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:18:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:18:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8324.00 2009-May-18 22:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.568 (still bad) 2009-May-18 22:18:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:18:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:18:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:18:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:18:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:18:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:18:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:18:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:18:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.536 (still bad) 2009-May-18 22:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.531 (still bad) 2009-May-18 22:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.534 (still bad) 2009-May-18 22:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.529 (still bad) 2009-May-18 22:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.533 (still bad) 2009-May-18 22:18:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:18:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:18:54 LOG5 end_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2009-May-18 22:18:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:18:54 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2009-May-18 22:18:54 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2009-May-18 22:18:54 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2009-May-18 22:18:54 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2009-May-18 22:18:54 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:18:54 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:18:54 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:18:54 LOG2 antvel: Parameters to Doppler: Topocentric 94734 2009 138 0.0 2009-May-18 22:18:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:18:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2009-May-18 22:18:54 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2009-May-18 22:18:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:18:54 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:18:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2009-May-18 22:18:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:18:54 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-18 22:18:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:18:54 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2009-May-18 22:18:54 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.657592 2009.3803690394707 18.999933 2009-May-18 22:18:54 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666665 7.124444444444443 2009-May-18 22:18:54 LOG4 log_alfabeam: ALFABEAM 1 12.829142146362267 7.209950956210709 2009-May-18 22:18:54 LOG4 log_alfabeam: ALFABEAM 2 12.822552384565112 7.210595328679573 2009-May-18 22:18:54 LOG4 log_alfabeam: ALFABEAM 3 12.818308173419579 7.125279785233261 2009-May-18 22:18:54 LOG4 log_alfabeam: ALFABEAM 4 12.820703716477245 7.038787762547238 2009-May-18 22:18:54 LOG4 log_alfabeam: ALFABEAM 5 12.827317808860593 7.038344781525196 2009-May-18 22:18:54 LOG4 log_alfabeam: ALFABEAM 6 12.831511953923247 7.124191049434565 2009-May-18 22:18:54 INFO2 take_data: Starting WAPP+GALFA scan: 913800227 2009-May-18 22:18:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:18:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:18:55 LOG5 begin_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2009-May-18 22:18:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:18:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2009-May-18 22:18:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:18:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:18:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:18:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8336.00 2009-May-18 22:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.533 (still bad) 2009-May-18 22:18:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:18:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:18:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:18:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:18:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:18:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:18:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:18:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:18:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.534 (still bad) 2009-May-18 22:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.530 (still bad) 2009-May-18 22:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.537 (still bad) 2009-May-18 22:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.532 (still bad) 2009-May-18 22:19:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:19:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:19:06 LOG5 end_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2009-May-18 22:19:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:19:06 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2009-May-18 22:19:06 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2009-May-18 22:19:06 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2009-May-18 22:19:06 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2009-May-18 22:19:06 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:19:06 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:19:06 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:19:06 LOG2 antvel: Parameters to Doppler: Topocentric 94746 2009 138 0.0 2009-May-18 22:19:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:19:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2009-May-18 22:19:06 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2009-May-18 22:19:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:19:06 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:19:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2009-May-18 22:19:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:19:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-18 22:19:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:19:06 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2009-May-18 22:19:06 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.660935 2009.3803694197277 18.999933 2009-May-18 22:19:06 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666667 7.124444444444440 2009-May-18 22:19:06 LOG4 log_alfabeam: ALFABEAM 1 12.829153242757020 7.209829270533151 2009-May-18 22:19:06 LOG4 log_alfabeam: ALFABEAM 2 12.822563546900202 7.210663197552205 2009-May-18 22:19:06 LOG4 log_alfabeam: ALFABEAM 3 12.818308307798803 7.125469409354115 2009-May-18 22:19:06 LOG4 log_alfabeam: ALFABEAM 4 12.820692578626941 7.038909411179056 2009-May-18 22:19:06 LOG4 log_alfabeam: ALFABEAM 5 12.827306570857372 7.038275730400937 2009-May-18 22:19:06 LOG4 log_alfabeam: ALFABEAM 6 12.831511922379899 7.124000428613495 2009-May-18 22:19:06 INFO2 take_data: Starting WAPP+GALFA scan: 913800228 2009-May-18 22:19:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:19:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:19:07 LOG5 begin_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2009-May-18 22:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.529 (still bad) 2009-May-18 22:19:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:19:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2009-May-18 22:19:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:19:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:19:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:19:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8348.00 2009-May-18 22:19:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:19:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:19:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:19:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:19:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:19:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:19:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:19:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.530 (still bad) 2009-May-18 22:19:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.526 (still bad) 2009-May-18 22:19:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 22:19:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.245 1.379 1.327 1.324 2009-May-18 22:19:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.517 1.528 1.340 1.389 2009-May-18 22:19:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.413 1.339 1.345 1.378 2009-May-18 22:19:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.431 0.109 1.233 0.135 2009-May-18 22:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.528 (still bad) 2009-May-18 22:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.529 (still bad) 2009-May-18 22:19:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:19:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:19:18 LOG5 end_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2009-May-18 22:19:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:19:18 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2009-May-18 22:19:18 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2009-May-18 22:19:18 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2009-May-18 22:19:18 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2009-May-18 22:19:18 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:19:18 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:19:18 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:19:18 LOG2 antvel: Parameters to Doppler: Topocentric 94758 2009 138 0.0 2009-May-18 22:19:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:19:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2009-May-18 22:19:18 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2009-May-18 22:19:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:19:18 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:19:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2009-May-18 22:19:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:19:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-18 22:19:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:19:18 LOG5 begin_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2009-May-18 22:19:18 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.664277 2009.3803697999847 18.999933 2009-May-18 22:19:18 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666665 7.124444444444430 2009-May-18 22:19:18 LOG4 log_alfabeam: ALFABEAM 1 12.829164270200033 7.209707852054893 2009-May-18 22:19:18 LOG4 log_alfabeam: ALFABEAM 2 12.822574664349794 7.210730422793446 2009-May-18 22:19:18 LOG4 log_alfabeam: ALFABEAM 3 12.818308465949764 7.125658118039717 2009-May-18 22:19:18 LOG4 log_alfabeam: ALFABEAM 4 12.820681509892410 7.039030795393937 2009-May-18 22:19:18 LOG4 log_alfabeam: ALFABEAM 5 12.827295377756876 7.038207332947827 2009-May-18 22:19:18 LOG4 log_alfabeam: ALFABEAM 6 12.831511866330224 7.123810721215589 2009-May-18 22:19:18 INFO2 take_data: Starting WAPP+GALFA scan: 913800229 2009-May-18 22:19:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:19:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:19:19 LOG5 begin_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2009-May-18 22:19:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:19:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2009-May-18 22:19:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:19:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:19:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.528 (still bad) 2009-May-18 22:19:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8360.00 2009-May-18 22:19:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:19:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:19:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:19:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:19:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:19:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:19:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:19:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:19:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.530 (still bad) 2009-May-18 22:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.522 (still bad) 2009-May-18 22:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.523 (still bad) 2009-May-18 22:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.525 (still bad) 2009-May-18 22:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.523 (still bad) 2009-May-18 22:19:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:19:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:19:30 LOG5 end_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2009-May-18 22:19:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:19:30 LOG5 end_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2009-May-18 22:19:30 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2009-May-18 22:19:30 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2009-May-18 22:19:30 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2009-May-18 22:19:30 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:19:30 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:19:30 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:19:30 LOG2 antvel: Parameters to Doppler: Topocentric 94770 2009 138 0.0 2009-May-18 22:19:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:19:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2009-May-18 22:19:30 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2009-May-18 22:19:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:19:30 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:19:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2009-May-18 22:19:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:19:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-18 22:19:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:19:30 LOG5 begin_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2009-May-18 22:19:30 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.667620 2009.3803701802417 18.999933 2009-May-18 22:19:30 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666661 7.124444444444456 2009-May-18 22:19:30 LOG4 log_alfabeam: ALFABEAM 1 12.829175235691213 7.209586630315515 2009-May-18 22:19:30 LOG4 log_alfabeam: ALFABEAM 2 12.822585743640113 7.210797050082149 2009-May-18 22:19:30 LOG4 log_alfabeam: ALFABEAM 3 12.818308647639622 7.125846027522361 2009-May-18 22:19:30 LOG4 log_alfabeam: ALFABEAM 4 12.820670503249248 7.039151985598997 2009-May-18 22:19:30 LOG4 log_alfabeam: ALFABEAM 5 12.827284222791457 7.038139542723175 2009-May-18 22:19:30 LOG4 log_alfabeam: ALFABEAM 6 12.831511786071873 7.123621810489781 2009-May-18 22:19:30 INFO2 take_data: Starting WAPP+GALFA scan: 913800230 2009-May-18 22:19:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:19:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:19:31 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2009-May-18 22:19:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:19:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2009-May-18 22:19:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:19:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:19:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:19:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8372.00 2009-May-18 22:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.526 (still bad) 2009-May-18 22:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.533 (still bad) 2009-May-18 22:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.527 (still bad) 2009-May-18 22:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.525 (still bad) 2009-May-18 22:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.530 (still bad) 2009-May-18 22:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.526 (still bad) 2009-May-18 22:19:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:19:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:19:42 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2009-May-18 22:19:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:19:42 LOG5 end_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2009-May-18 22:19:42 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2009-May-18 22:19:42 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2009-May-18 22:19:42 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2009-May-18 22:19:42 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:19:42 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:19:42 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:19:42 LOG2 antvel: Parameters to Doppler: Topocentric 94782 2009 138 0.0 2009-May-18 22:19:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:19:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2009-May-18 22:19:42 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2009-May-18 22:19:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:19:42 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:19:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2009-May-18 22:19:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:19:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-18 22:19:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:19:42 LOG5 begin_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2009-May-18 22:19:42 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.670962 2009.3803705604989 18.999933 2009-May-18 22:19:42 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666665 7.124444444444439 2009-May-18 22:19:42 LOG4 log_alfabeam: ALFABEAM 1 12.829186133069236 7.209465679986503 2009-May-18 22:19:42 LOG4 log_alfabeam: ALFABEAM 2 12.822596778217758 7.210863044963373 2009-May-18 22:19:42 LOG4 log_alfabeam: ALFABEAM 3 12.818308852435738 7.126033028692870 2009-May-18 22:19:42 LOG4 log_alfabeam: ALFABEAM 4 12.820659564883572 7.039272907108900 2009-May-18 22:19:42 LOG4 log_alfabeam: ALFABEAM 5 12.827273112563576 7.038072394815267 2009-May-18 22:19:42 LOG4 log_alfabeam: ALFABEAM 6 12.831511681980507 7.123433806221784 2009-May-18 22:19:42 INFO2 take_data: Starting WAPP+GALFA scan: 913800231 2009-May-18 22:19:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:19:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:19:43 LOG5 begin_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2009-May-18 22:19:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:19:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2009-May-18 22:19:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:19:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:19:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:19:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8384.00 2009-May-18 22:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.527 (still bad) 2009-May-18 22:19:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:19:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:19:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:19:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:19:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:19:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:19:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:19:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:19:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.537 (still bad) 2009-May-18 22:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.529 (still bad) 2009-May-18 22:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.529 (still bad) 2009-May-18 22:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.535 (still bad) 2009-May-18 22:19:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.530 (still bad) 2009-May-18 22:19:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:19:54 LOG5 end_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2009-May-18 22:19:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:19:54 LOG5 end_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2009-May-18 22:19:54 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-May-18 22:19:54 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-May-18 22:19:54 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-May-18 22:19:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-18 22:19:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-18 22:19:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-18 22:19:54 LOG5 begin_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2009-May-18 22:19:54 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-18 22:19:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-18 22:19:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-18 22:19:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-18 22:19:54 LOG5 end_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2009-May-18 22:19:54 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-May-18 22:19:54 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2009-May-18 22:19:54 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2009-May-18 22:19:54 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-May-18 22:19:54 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:19:54 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:19:54 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:19:54 LOG2 antvel: Parameters to Doppler: Topocentric 94794 2009 138 0.0 2009-May-18 22:19:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:19:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-May-18 22:19:54 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-May-18 22:19:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:19:54 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:19:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-May-18 22:19:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:19:54 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-18 22:19:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:19:54 LOG5 begin_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2009-May-18 22:19:54 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.674305 2009.3803709407559 18.999933 2009-May-18 22:19:54 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666665 7.124444444444441 2009-May-18 22:19:54 LOG4 log_alfabeam: ALFABEAM 1 12.829196969253156 7.209344930784371 2009-May-18 22:19:54 LOG4 log_alfabeam: ALFABEAM 2 12.822607774763144 7.210928452299345 2009-May-18 22:19:54 LOG4 log_alfabeam: ALFABEAM 3 12.818309080140006 7.126219236783682 2009-May-18 22:19:54 LOG4 log_alfabeam: ALFABEAM 4 12.820648687851934 7.039393630157690 2009-May-18 22:19:54 LOG4 log_alfabeam: ALFABEAM 5 12.827262040351251 7.038005843609749 2009-May-18 22:19:54 LOG4 log_alfabeam: ALFABEAM 6 12.831511554318194 7.123246592655528 2009-May-18 22:19:54 INFO2 take_data: Starting WAPP+GALFA scan: 913800232 2009-May-18 22:19:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:19:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:19:55 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2009-May-18 22:19:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:19:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-May-18 22:19:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:19:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:19:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:19:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8396.00 2009-May-18 22:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.532 (still bad) 2009-May-18 22:19:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:19:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:19:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:19:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:19:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:19:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:19:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:19:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:19:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.177 (still bad) 2009-May-18 22:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.167 (still bad) 2009-May-18 22:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.167 (still bad) 2009-May-18 22:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.170 (still bad) 2009-May-18 22:20:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:20:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:20:06 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2009-May-18 22:20:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:20:06 LOG5 end_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2009-May-18 22:20:06 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2009-May-18 22:20:06 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2009-May-18 22:20:06 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2009-May-18 22:20:06 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:20:06 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:20:06 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:20:06 LOG2 antvel: Parameters to Doppler: Topocentric 94806 2009 138 0.0 2009-May-18 22:20:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:20:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2009-May-18 22:20:06 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2009-May-18 22:20:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:20:06 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:20:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2009-May-18 22:20:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:20:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-18 22:20:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:20:06 LOG5 begin_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2009-May-18 22:20:06 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.677647 2009.3803713210129 18.999933 2009-May-18 22:20:06 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666667 7.124444444444441 2009-May-18 22:20:06 LOG4 log_alfabeam: ALFABEAM 1 12.829207738155972 7.209224456996137 2009-May-18 22:20:06 LOG4 log_alfabeam: ALFABEAM 2 12.822618726776062 7.210993238284725 2009-May-18 22:20:06 LOG4 log_alfabeam: ALFABEAM 3 12.818309330299055 7.126404543724259 2009-May-18 22:20:06 LOG4 log_alfabeam: ALFABEAM 4 12.820637878265909 7.039514080441842 2009-May-18 22:20:06 LOG4 log_alfabeam: ALFABEAM 5 12.827251012703602 7.037939923534025 2009-May-18 22:20:06 LOG4 log_alfabeam: ALFABEAM 6 12.831511403482176 7.123060278538444 2009-May-18 22:20:06 INFO2 take_data: Starting WAPP+GALFA scan: 913800233 2009-May-18 22:20:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:20:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:20:07 LOG5 begin_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2009-May-18 22:20:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:20:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2009-May-18 22:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.167 (still bad) 2009-May-18 22:20:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:20:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:20:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:20:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8408.00 2009-May-18 22:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.168 (still bad) 2009-May-18 22:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.146 (still bad) 2009-May-18 22:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.143 (still bad) 2009-May-18 22:20:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-18 22:20:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.939 1.053 1.017 1.011 2009-May-18 22:20:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.132 1.146 1.018 1.056 2009-May-18 22:20:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.055 1.004 1.006 1.075 2009-May-18 22:20:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.109 0.905 0.135 2009-May-18 22:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.144 (still bad) 2009-May-18 22:20:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:20:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:20:18 LOG5 end_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2009-May-18 22:20:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:20:18 LOG5 end_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2009-May-18 22:20:18 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2009-May-18 22:20:18 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2009-May-18 22:20:18 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2009-May-18 22:20:18 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:20:18 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:20:18 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:20:18 LOG2 antvel: Parameters to Doppler: Topocentric 94818 2009 138 0.0 2009-May-18 22:20:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:20:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2009-May-18 22:20:18 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2009-May-18 22:20:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:20:18 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:20:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2009-May-18 22:20:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:20:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-18 22:20:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:20:19 LOG5 begin_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2009-May-18 22:20:19 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.680989 2009.38037170127 18.999933 2009-May-18 22:20:19 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666667 7.124444444444452 2009-May-18 22:20:19 LOG4 log_alfabeam: ALFABEAM 1 12.829218443423029 7.209104224462884 2009-May-18 22:20:19 LOG4 log_alfabeam: ALFABEAM 2 12.822629637632515 7.211057427860012 2009-May-18 22:20:19 LOG4 log_alfabeam: ALFABEAM 3 12.818309602663891 7.126589008682250 2009-May-18 22:20:19 LOG4 log_alfabeam: ALFABEAM 4 12.820627132468054 7.039634292080363 2009-May-18 22:20:19 LOG4 log_alfabeam: ALFABEAM 5 12.827240026225583 7.037874609242077 2009-May-18 22:20:19 LOG4 log_alfabeam: ALFABEAM 6 12.831511229755208 7.122874804476835 2009-May-18 22:20:19 INFO2 take_data: Starting WAPP+GALFA scan: 913800234 2009-May-18 22:20:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:20:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:20:19 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2009-May-18 22:20:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:20:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2009-May-18 22:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.143 (still bad) 2009-May-18 22:20:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:20:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:20:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:20:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8420.00 2009-May-18 22:20:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:20:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:20:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:20:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:20:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:20:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:20:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:20:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:20:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.145 (still bad) 2009-May-18 22:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.141 (still bad) 2009-May-18 22:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.141 (still bad) 2009-May-18 22:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.144 (still bad) 2009-May-18 22:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.142 (still bad) 2009-May-18 22:20:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:20:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:20:30 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2009-May-18 22:20:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:20:30 LOG5 end_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2009-May-18 22:20:30 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2009-May-18 22:20:30 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2009-May-18 22:20:30 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2009-May-18 22:20:30 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:20:30 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:20:30 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:20:30 LOG2 antvel: Parameters to Doppler: Topocentric 94830 2009 138 0.0 2009-May-18 22:20:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:20:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2009-May-18 22:20:30 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2009-May-18 22:20:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:20:30 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:20:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2009-May-18 22:20:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:20:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-18 22:20:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:20:30 LOG5 begin_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2009-May-18 22:20:30 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.684332 2009.380372081527 18.999933 2009-May-18 22:20:30 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666665 7.124444444444446 2009-May-18 22:20:30 LOG4 log_alfabeam: ALFABEAM 1 12.829229088621901 7.208984199265298 2009-May-18 22:20:30 LOG4 log_alfabeam: ALFABEAM 2 12.822640510660982 7.211121045211834 2009-May-18 22:20:30 LOG4 log_alfabeam: ALFABEAM 3 12.818309897015423 7.126772689826200 2009-May-18 22:20:30 LOG4 log_alfabeam: ALFABEAM 4 12.820616446878814 7.039754298955995 2009-May-18 22:20:30 LOG4 log_alfabeam: ALFABEAM 5 12.827229077569605 7.037809876153014 2009-May-18 22:20:30 LOG4 log_alfabeam: ALFABEAM 6 12.831511033389310 7.122690112072619 2009-May-18 22:20:30 INFO2 take_data: Starting WAPP+GALFA scan: 913800235 2009-May-18 22:20:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:20:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:20:31 LOG5 begin_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2009-May-18 22:20:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:20:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2009-May-18 22:20:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:20:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:20:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:20:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8432.00 2009-May-18 22:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.143 (still bad) 2009-May-18 22:20:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:20:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:20:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:20:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:20:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:20:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:20:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:20:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:20:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.140 (still bad) 2009-May-18 22:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.139 (still bad) 2009-May-18 22:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.142 (still bad) 2009-May-18 22:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.140 (still bad) 2009-May-18 22:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.140 (still bad) 2009-May-18 22:20:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:20:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:20:42 LOG5 end_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2009-May-18 22:20:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:20:42 LOG5 end_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2009-May-18 22:20:42 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2009-May-18 22:20:42 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2009-May-18 22:20:42 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2009-May-18 22:20:42 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:20:42 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:20:42 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:20:42 LOG2 antvel: Parameters to Doppler: Topocentric 94842 2009 138 0.0 2009-May-18 22:20:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:20:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2009-May-18 22:20:42 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2009-May-18 22:20:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:20:42 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:20:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2009-May-18 22:20:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:20:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-18 22:20:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:20:42 LOG5 begin_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2009-May-18 22:20:42 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.687674 2009.3803724617842 18.999933 2009-May-18 22:20:42 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666665 7.124444444444440 2009-May-18 22:20:42 LOG4 log_alfabeam: ALFABEAM 1 12.829239667775147 7.208864455109832 2009-May-18 22:20:42 LOG4 log_alfabeam: ALFABEAM 2 12.822651339440368 7.211184057486211 2009-May-18 22:20:42 LOG4 log_alfabeam: ALFABEAM 3 12.818310212870413 7.126955480623929 2009-May-18 22:20:42 LOG4 log_alfabeam: ALFABEAM 4 12.820605827499897 7.039874027341982 2009-May-18 22:20:42 LOG4 log_alfabeam: ALFABEAM 5 12.827218173205488 7.037745757726470 2009-May-18 22:20:42 LOG4 log_alfabeam: ALFABEAM 6 12.831510814812846 7.122506308535137 2009-May-18 22:20:42 INFO2 take_data: Starting WAPP+GALFA scan: 913800236 2009-May-18 22:20:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:20:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:20:43 LOG5 begin_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2009-May-18 22:20:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:20:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2009-May-18 22:20:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:20:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:20:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:20:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8444.00 2009-May-18 22:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.140 (still bad) 2009-May-18 22:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-May-18 22:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.137 (still bad) 2009-May-18 22:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.139 (still bad) 2009-May-18 22:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.134 (still bad) 2009-May-18 22:20:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:20:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:20:54 LOG5 end_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2009-May-18 22:20:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:20:54 LOG5 end_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2009-May-18 22:20:54 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2009-May-18 22:20:54 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2009-May-18 22:20:54 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2009-May-18 22:20:54 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:20:54 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:20:54 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:20:54 LOG2 antvel: Parameters to Doppler: Topocentric 94854 2009 138 0.0 2009-May-18 22:20:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:20:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2009-May-18 22:20:54 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2009-May-18 22:20:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:20:54 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:20:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2009-May-18 22:20:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:20:54 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-18 22:20:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:20:54 LOG5 begin_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2009-May-18 22:20:54 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.691017 2009.3803728420412 18.999933 2009-May-18 22:20:54 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666665 7.124444444444440 2009-May-18 22:20:54 LOG4 log_alfabeam: ALFABEAM 1 12.829250187603513 7.208744922188802 2009-May-18 22:20:54 LOG4 log_alfabeam: ALFABEAM 2 12.822662130536614 7.211246507560966 2009-May-18 22:20:54 LOG4 log_alfabeam: ALFABEAM 3 12.818310550113882 7.127137493832302 2009-May-18 22:20:54 LOG4 log_alfabeam: ALFABEAM 4 12.820595267586512 7.039993547005667 2009-May-18 22:20:54 LOG4 log_alfabeam: ALFABEAM 5 12.827207306525425 7.037682210360980 2009-May-18 22:20:54 LOG4 log_alfabeam: ALFABEAM 6 12.831510574202731 7.122323280572692 2009-May-18 22:20:54 INFO2 take_data: Starting WAPP+GALFA scan: 913800237 2009-May-18 22:20:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:20:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:20:55 LOG5 begin_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2009-May-18 22:20:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:20:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2009-May-18 22:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.137 (still bad) 2009-May-18 22:20:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:20:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:20:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:20:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8456.00 2009-May-18 22:20:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:20:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:20:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:20:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:20:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:20:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:20:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:20:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:20:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.143 (still bad) 2009-May-18 22:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-18 22:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-18 22:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-May-18 22:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-18 22:21:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:21:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:21:06 LOG5 end_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2009-May-18 22:21:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:21:06 LOG5 end_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2009-May-18 22:21:06 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2009-May-18 22:21:06 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2009-May-18 22:21:06 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2009-May-18 22:21:06 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:21:06 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:21:06 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:21:06 LOG2 antvel: Parameters to Doppler: Topocentric 94866 2009 138 0.0 2009-May-18 22:21:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:21:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2009-May-18 22:21:06 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2009-May-18 22:21:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:21:06 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:21:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2009-May-18 22:21:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:21:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-18 22:21:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:21:06 LOG5 begin_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2009-May-18 22:21:06 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.694359 2009.3803732222982 18.999933 2009-May-18 22:21:06 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666667 7.124444444444443 2009-May-18 22:21:06 LOG4 log_alfabeam: ALFABEAM 1 12.829260642201330 7.208625673819299 2009-May-18 22:21:06 LOG4 log_alfabeam: ALFABEAM 2 12.822672877580908 7.211308363201248 2009-May-18 22:21:06 LOG4 log_alfabeam: ALFABEAM 3 12.818310908243488 7.127318623931777 2009-May-18 22:21:06 LOG4 log_alfabeam: ALFABEAM 4 12.820584773068404 7.040112784607277 2009-May-18 22:21:06 LOG4 log_alfabeam: ALFABEAM 5 12.827196483946810 7.037619266886330 2009-May-18 22:21:06 LOG4 log_alfabeam: ALFABEAM 6 12.831510312007270 7.122141134382026 2009-May-18 22:21:06 INFO2 take_data: Starting WAPP+GALFA scan: 913800238 2009-May-18 22:21:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:21:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:21:07 LOG5 begin_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2009-May-18 22:21:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:21:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2009-May-18 22:21:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:21:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:21:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-18 22:21:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8468.00 2009-May-18 22:21:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:21:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:21:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:21:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:21:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:21:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:21:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:21:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:21:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.143 (still bad) 2009-May-18 22:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-18 22:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-18 22:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-May-18 22:21:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-18 22:21:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.944 1.049 1.021 1.013 2009-May-18 22:21:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.135 1.128 1.013 1.059 2009-May-18 22:21:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.066 1.010 1.002 1.069 2009-May-18 22:21:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.110 0.918 0.136 2009-May-18 22:21:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:21:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:21:18 LOG5 end_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2009-May-18 22:21:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:21:18 LOG5 end_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2009-May-18 22:21:18 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-May-18 22:21:18 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-May-18 22:21:18 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-May-18 22:21:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-18 22:21:18 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2009-May-18 22:21:18 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-18 22:21:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-May-18 22:21:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-18 22:21:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-18 22:21:18 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2009-May-18 22:21:18 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2009-May-18 22:21:18 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2009-May-18 22:21:18 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-May-18 22:21:18 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:21:18 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:21:18 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:21:18 LOG2 antvel: Parameters to Doppler: Topocentric 94878 2009 138 0.0 2009-May-18 22:21:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:21:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-May-18 22:21:18 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-May-18 22:21:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:21:18 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:21:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-May-18 22:21:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:21:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-18 22:21:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:21:18 LOG5 begin_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2009-May-18 22:21:18 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.697702 2009.3803736025552 18.999933 2009-May-18 22:21:18 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666665 7.124444444444448 2009-May-18 22:21:18 LOG4 log_alfabeam: ALFABEAM 1 12.829271038211562 7.208506640396747 2009-May-18 22:21:18 LOG4 log_alfabeam: ALFABEAM 2 12.822683587093476 7.211369666513669 2009-May-18 22:21:18 LOG4 log_alfabeam: ALFABEAM 3 12.818311287176055 7.127498982699035 2009-May-18 22:21:18 LOG4 log_alfabeam: ALFABEAM 4 12.820574337278735 7.040231809714523 2009-May-18 22:21:18 LOG4 log_alfabeam: ALFABEAM 5 12.827185698907492 7.037556884483478 2009-May-18 22:21:18 LOG4 log_alfabeam: ALFABEAM 6 12.831510028370769 7.121959757647471 2009-May-18 22:21:18 INFO2 take_data: Starting WAPP+GALFA scan: 913800239 2009-May-18 22:21:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:21:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:21:19 LOG5 begin_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2009-May-18 22:21:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:21:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-May-18 22:21:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:21:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:21:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:21:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8480.00 2009-May-18 22:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-May-18 22:21:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:21:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:21:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:21:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:21:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:21:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:21:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:21:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:21:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.596 (still bad) 2009-May-18 22:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.583 (still bad) 2009-May-18 22:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.582 (still bad) 2009-May-18 22:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.588 (still bad) 2009-May-18 22:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.584 (still bad) 2009-May-18 22:21:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:21:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:21:30 LOG5 end_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2009-May-18 22:21:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:21:30 LOG5 end_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2009-May-18 22:21:30 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2009-May-18 22:21:30 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2009-May-18 22:21:30 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2009-May-18 22:21:30 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:21:30 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:21:30 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:21:30 LOG2 antvel: Parameters to Doppler: Topocentric 94890 2009 138 0.0 2009-May-18 22:21:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:21:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2009-May-18 22:21:30 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2009-May-18 22:21:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:21:30 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:21:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2009-May-18 22:21:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:21:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-18 22:21:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:21:30 LOG5 begin_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2009-May-18 22:21:30 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.701044 2009.3803739828124 18.999826 2009-May-18 22:21:30 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666665 7.124444444444438 2009-May-18 22:21:30 LOG4 log_alfabeam: ALFABEAM 1 12.829281360320111 7.208387991221681 2009-May-18 22:21:30 LOG4 log_alfabeam: ALFABEAM 2 12.822694240917011 7.211430299237643 2009-May-18 22:21:30 LOG4 log_alfabeam: ALFABEAM 3 12.818311684080925 7.127678281056776 2009-May-18 22:21:30 LOG4 log_alfabeam: ALFABEAM 4 12.820563975658493 7.040350451854010 2009-May-18 22:21:30 LOG4 log_alfabeam: ALFABEAM 5 12.827174969561566 7.037495183548364 2009-May-18 22:21:30 LOG4 log_alfabeam: ALFABEAM 6 12.831509726019142 7.121779439720075 2009-May-18 22:21:30 INFO2 take_data: Starting WAPP+GALFA scan: 913800240 2009-May-18 22:21:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:21:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:21:31 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2009-May-18 22:21:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:21:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2009-May-18 22:21:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:21:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:21:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:21:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8492.00 2009-May-18 22:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.584 (still bad) 2009-May-18 22:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.562 (still bad) 2009-May-18 22:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.554 (still bad) 2009-May-18 22:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.550 (still bad) 2009-May-18 22:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.555 (still bad) 2009-May-18 22:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.551 (still bad) 2009-May-18 22:21:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:21:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:21:42 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2009-May-18 22:21:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:21:42 LOG5 end_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2009-May-18 22:21:42 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2009-May-18 22:21:42 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2009-May-18 22:21:42 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2009-May-18 22:21:42 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:21:42 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:21:42 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:21:42 LOG2 antvel: Parameters to Doppler: Topocentric 94902 2009 138 0.0 2009-May-18 22:21:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:21:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2009-May-18 22:21:42 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2009-May-18 22:21:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:21:42 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:21:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2009-May-18 22:21:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:21:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-18 22:21:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:21:42 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2009-May-18 22:21:42 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.704387 2009.3803743630694 18.999933 2009-May-18 22:21:42 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666665 7.124444444444438 2009-May-18 22:21:42 LOG4 log_alfabeam: ALFABEAM 1 12.829291643530494 7.208269367775888 2009-May-18 22:21:42 LOG4 log_alfabeam: ALFABEAM 2 12.822704881047205 7.211490562620349 2009-May-18 22:21:42 LOG4 log_alfabeam: ALFABEAM 3 12.818312105835338 7.127857183487778 2009-May-18 22:21:42 LOG4 log_alfabeam: ALFABEAM 4 12.820553652871233 7.040469072953782 2009-May-18 22:21:42 LOG4 log_alfabeam: ALFABEAM 5 12.827164254026153 7.037433857479327 2009-May-18 22:21:42 LOG4 log_alfabeam: ALFABEAM 6 12.831509398289995 7.121599516784173 2009-May-18 22:21:42 INFO2 take_data: Starting WAPP+GALFA scan: 913800241 2009-May-18 22:21:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:21:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:21:43 LOG5 begin_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2009-May-18 22:21:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:21:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2009-May-18 22:21:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:21:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:21:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:21:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8504.00 2009-May-18 22:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.552 (still bad) 2009-May-18 22:21:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:21:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:21:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:21:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:21:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:21:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:21:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:21:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:21:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.559 (still bad) 2009-May-18 22:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.548 (still bad) 2009-May-18 22:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.548 (still bad) 2009-May-18 22:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.553 (still bad) 2009-May-18 22:21:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:21:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:21:54 LOG5 end_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2009-May-18 22:21:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:21:54 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2009-May-18 22:21:54 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2009-May-18 22:21:54 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2009-May-18 22:21:54 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2009-May-18 22:21:54 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:21:54 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38037 J 2009-May-18 22:21:54 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:21:54 LOG2 antvel: Parameters to Doppler: Topocentric 94914 2009 138 0.0 2009-May-18 22:21:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:21:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2009-May-18 22:21:54 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2009-May-18 22:21:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:21:54 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:21:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2009-May-18 22:21:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:21:54 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-18 22:21:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:21:54 LOG5 begin_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2009-May-18 22:21:54 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.707729 2009.3803747433265 18.999933 2009-May-18 22:21:54 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666665 7.124444444444451 2009-May-18 22:21:54 LOG4 log_alfabeam: ALFABEAM 1 12.829301853640077 7.208151131716486 2009-May-18 22:21:54 LOG4 log_alfabeam: ALFABEAM 2 12.822715465697511 7.211550165730890 2009-May-18 22:21:54 LOG4 log_alfabeam: ALFABEAM 3 12.818312544971125 7.128035032786651 2009-May-18 22:21:54 LOG4 log_alfabeam: ALFABEAM 4 12.820543403452417 7.040587307886089 2009-May-18 22:21:54 LOG4 log_alfabeam: ALFABEAM 5 12.827153593981240 7.037373202434357 2009-May-18 22:21:54 LOG4 log_alfabeam: ALFABEAM 6 12.831509052444547 7.121420645512028 2009-May-18 22:21:54 INFO2 take_data: Starting WAPP+GALFA scan: 913800242 2009-May-18 22:21:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:21:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:21:55 LOG5 begin_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2009-May-18 22:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.552 (still bad) 2009-May-18 22:21:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:21:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2009-May-18 22:21:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:21:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:21:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:21:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8516.00 2009-May-18 22:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.554 (still bad) 2009-May-18 22:21:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.548 (still bad) 2009-May-18 22:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.546 (still bad) 2009-May-18 22:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.548 (still bad) 2009-May-18 22:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.545 (still bad) 2009-May-18 22:22:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:22:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:22:06 LOG5 end_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2009-May-18 22:22:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:22:06 LOG5 end_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2009-May-18 22:22:06 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2009-May-18 22:22:06 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2009-May-18 22:22:06 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2009-May-18 22:22:06 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:22:06 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38038 J 2009-May-18 22:22:06 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:22:06 LOG2 antvel: Parameters to Doppler: Topocentric 94926 2009 138 0.0 2009-May-18 22:22:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:22:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2009-May-18 22:22:06 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2009-May-18 22:22:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:22:06 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:22:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2009-May-18 22:22:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:22:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-18 22:22:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:22:06 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2009-May-18 22:22:06 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.711072 2009.3803751235835 18.999933 2009-May-18 22:22:06 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666665 7.124444444444446 2009-May-18 22:22:06 LOG4 log_alfabeam: ALFABEAM 1 12.829312006617940 7.208033117490891 2009-May-18 22:22:06 LOG4 log_alfabeam: ALFABEAM 2 12.822726013137236 7.211609235804347 2009-May-18 22:22:06 LOG4 log_alfabeam: ALFABEAM 3 12.818313003776106 7.128212123347755 2009-May-18 22:22:06 LOG4 log_alfabeam: ALFABEAM 4 12.820533211306341 7.040705323321245 2009-May-18 22:22:06 LOG4 log_alfabeam: ALFABEAM 5 12.827142971167040 7.037313088936965 2009-May-18 22:22:06 LOG4 log_alfabeam: ALFABEAM 6 12.831508686306053 7.121242531366065 2009-May-18 22:22:06 INFO2 take_data: Starting WAPP+GALFA scan: 913800243 2009-May-18 22:22:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:22:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:22:07 LOG5 begin_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2009-May-18 22:22:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:22:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2009-May-18 22:22:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:22:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:22:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.546 (still bad) 2009-May-18 22:22:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8528.00 2009-May-18 22:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.551 (still bad) 2009-May-18 22:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.540 (still bad) 2009-May-18 22:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.540 (still bad) 2009-May-18 22:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.542 (still bad) 2009-May-18 22:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.539 (still bad) 2009-May-18 22:22:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:22:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:22:18 LOG5 end_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2009-May-18 22:22:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:22:18 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2009-May-18 22:22:18 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2009-May-18 22:22:18 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2009-May-18 22:22:18 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2009-May-18 22:22:18 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:22:18 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38038 J 2009-May-18 22:22:18 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:22:18 LOG2 antvel: Parameters to Doppler: Topocentric 94938 2009 138 0.0 2009-May-18 22:22:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:22:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2009-May-18 22:22:18 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2009-May-18 22:22:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:22:18 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:22:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2009-May-18 22:22:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:22:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-18 22:22:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:22:18 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2009-May-18 22:22:18 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.714414 2009.3803755038405 18.999933 2009-May-18 22:22:18 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666665 7.124444444444423 2009-May-18 22:22:18 LOG4 log_alfabeam: ALFABEAM 1 12.829322096767772 7.207915397238796 2009-May-18 22:22:18 LOG4 log_alfabeam: ALFABEAM 2 12.822736517152142 7.211667742393285 2009-May-18 22:22:18 LOG4 log_alfabeam: ALFABEAM 3 12.818313481694242 7.128388352627991 2009-May-18 22:22:18 LOG4 log_alfabeam: ALFABEAM 4 12.820523082152704 7.040823047089826 2009-May-18 22:22:18 LOG4 log_alfabeam: ALFABEAM 5 12.827132391845895 7.037253547998221 2009-May-18 22:22:18 LOG4 log_alfabeam: ALFABEAM 6 12.831508300378866 7.121065277565772 2009-May-18 22:22:18 INFO2 take_data: Starting WAPP+GALFA scan: 913800244 2009-May-18 22:22:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:22:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:22:19 LOG5 begin_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2009-May-18 22:22:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:22:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2009-May-18 22:22:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:22:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:22:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:22:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-18 22:22:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.270 1.394 1.342 1.341 2009-May-18 22:22:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.541 1.542 1.366 1.419 2009-May-18 22:22:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.436 1.361 1.366 1.394 2009-May-18 22:22:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.452 0.110 1.256 0.136 2009-May-18 22:22:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8540.00 2009-May-18 22:22:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:22:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:22:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:22:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:22:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:22:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:22:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:22:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:22:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.551 (still bad) 2009-May-18 22:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.541 (still bad) 2009-May-18 22:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.540 (still bad) 2009-May-18 22:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.546 (still bad) 2009-May-18 22:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.539 (still bad) 2009-May-18 22:22:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:22:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:22:30 LOG5 end_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2009-May-18 22:22:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:22:30 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2009-May-18 22:22:30 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2009-May-18 22:22:30 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2009-May-18 22:22:30 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2009-May-18 22:22:30 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:22:30 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38038 J 2009-May-18 22:22:30 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:22:30 LOG2 antvel: Parameters to Doppler: Topocentric 94950 2009 138 0.0 2009-May-18 22:22:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:22:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2009-May-18 22:22:30 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2009-May-18 22:22:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:22:30 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:22:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2009-May-18 22:22:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:22:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-18 22:22:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-18 22:22:30 LOG5 begin_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2009-May-18 22:22:30 LOG5 log_alfabeam: Parameters: 12.824916666666665 7.1244444444444444 13.717757 2009.3803758840977 18.999933 2009-May-18 22:22:30 LOG4 log_alfabeam: ALFABEAM 0 12.824916666666665 7.124444444444438 2009-May-18 22:22:30 LOG4 log_alfabeam: ALFABEAM 1 12.829332130504243 7.207797902005116 2009-May-18 22:22:30 LOG4 log_alfabeam: ALFABEAM 2 12.822746984125594 7.211725725366129 2009-May-18 22:22:30 LOG4 log_alfabeam: ALFABEAM 3 12.818313978732943 7.128563829499623 2009-May-18 22:22:30 LOG4 log_alfabeam: ALFABEAM 4 12.820513009553439 7.040940548120330 2009-May-18 22:22:30 LOG4 log_alfabeam: ALFABEAM 5 12.827121849592293 7.037194539070311 2009-May-18 22:22:30 LOG4 log_alfabeam: ALFABEAM 6 12.831507894714381 7.120888774689028 2009-May-18 22:22:30 INFO2 take_data: Starting WAPP+GALFA scan: 913800245 2009-May-18 22:22:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-18 22:22:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-18 22:22:31 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2009-May-18 22:22:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-18 22:22:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2009-May-18 22:22:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:22:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:22:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:22:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8552.00 2009-May-18 22:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.545 (still bad) 2009-May-18 22:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-18 22:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1561.801386 MHz 2009-May-18 22:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1704.202850 MHz 2009-May-18 22:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1911.195368 MHz 2009-May-18 22:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1938.585347 MHz 2009-May-18 22:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1634.304017 MHz 2009-May-18 22:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1886.263548 MHz 2009-May-18 22:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1936.727775 MHz 2009-May-18 22:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1989.049765 MHz 2009-May-18 22:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.551 (still bad) 2009-May-18 22:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.552 (still bad) 2009-May-18 22:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.551 (still bad) 2009-May-18 22:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.551 (still bad) 2009-May-18 22:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.549 (still bad) 2009-May-18 22:22:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-18 22:22:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-18 22:22:42 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2009-May-18 22:22:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-18 22:22:42 LOG5 end_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2009-May-18 22:22:42 INFO2 smartfreq: Switching off CAL 2009-May-18 22:22:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-18 22:22:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-18 22:22:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-18 22:22:42 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2009-May-18 22:22:42 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-18 22:22:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-18 22:22:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-18 22:22:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-18 22:22:42 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2009-May-18 22:22:42 INFO3 restore_frequencies: Restoring original frequencies 2009-May-18 22:22:42 LOG5 antvel: Calling 'antvel 124929.700000 70728.000000 J 0' 2009-May-18 22:22:42 LOG2 antvel: Precessing RA = 12:49:29.7 Dec = +07:07:28.0 Epoch = 2009.38038 J 2009-May-18 22:22:42 LOG2 antvel: Computed apparent RA = 12:49:59.9 Dec = +07:04:15.9 2009-May-18 22:22:42 LOG2 antvel: Parameters to Doppler: Topocentric 94962 2009 138 0.0 2009-May-18 22:22:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-18 22:22:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2009-May-18 22:22:42 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2009-May-18 22:22:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-18 22:22:42 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-18 22:22:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2009-May-18 22:22:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:22:42 STOP finish_task: Finishing task 'smart frequency switching' 2009-May-18 22:22:42 LOG5 finish_task: Level: (2) ID = <10256> Status = 0 0 0 0 ok 2009-May-18 22:22:42 DONE finish_task: DONE finished pattern: smart frequency switching 2009-May-18 22:22:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-18 22:22:42 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-May-18 22:22:42 LOG5 end_task: Level: (2) ID = <10256> Status = 0 0 0 0 ok 2009-May-18 22:22:42 NOTE run_command_file: DONE with command file processing 2009-May-18 22:22:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-May-18 22:22:42 STOP finish_task: Finishing task 'running command file 'command_galfacurpos.cmd'' 2009-May-18 22:22:42 LOG5 finish_task: Level: (1) ID = <10240> Status = 0 0 0 0 ok 2009-May-18 22:22:42 DONE finish_task: DONE finished running: command file 'command_galfacurpos.cmd' 2009-May-18 22:22:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-18 22:22:43 END end_task: Finishing task 'running command file 'command_galfacurpos.cmd'' with status 'OK' 2009-May-18 22:22:43 LOG5 end_task: Level: (1) ID = <10240> Status = 0 0 0 0 ok 2009-May-18 22:22:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2009-May-18 22:22:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-18 22:22:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:22:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.549 (still bad) 2009-May-18 22:22:51 ALERT CIMA-exit_cima: Exiting CIMA ... 2009-May-18 22:22:51 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2009-May-18 22:22:51 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2009-May-18 22:22:51 LOG3 vw_send: To DATATAKING: mvdata a2048 2009-May-18 22:22:51 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2009-May-18 22:22:51 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2009-May-18 22:22:51 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2009-May-18 22:22:51 NOTE CIMA-exit_cima: Cleaning up session ... 2009-May-18 22:22:51 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2009-May-18 22:22:51 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2009-May-18 22:22:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:22:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-18 22:22:53 LOG3 exec_msg: Closing socket