2009-May-17 19:58:05 BEGIN executive: CIMA executive starting ... 2009-May-17 19:58:05 NOTE executive: STARTING NEW CIMA SESSION 2009-May-17 19:58:05 INFO1 executive: Using CIMA version 3.0.10 'normal' from 2008-12-29 17:18 2009-May-17 19:58:05 INFO4 executive: This is an ON-LINE session 2009-May-17 19:58:05 INFO4 executive: This is a REMOTE session 2009-May-17 19:58:05 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-May-17 19:58:05 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'E. Momjian' 2009-May-17 19:58:05 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20090517' 2009-May-17 19:58:06 LOG2 log_preferences: Currently applied preferences: 2009-May-17 19:58:06 LOG2 log_preferences: prefs(dailylog) = daily 2009-May-17 19:58:06 LOG2 log_preferences: prefs(offlinelog) = skip 2009-May-17 19:58:06 LOG2 log_preferences: prefs(datawindow) = ignore 2009-May-17 19:58:06 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-May-17 19:58:06 LOG2 log_preferences: prefs(wappfailure) = abort 2009-May-17 19:58:06 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-May-17 19:58:06 LOG2 log_preferences: prefs(logcolours) = full 2009-May-17 19:58:06 LOG2 log_preferences: prefs(displaylevel) = INFO3 2009-May-17 19:58:06 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-May-17 19:58:06 LOG2 log_preferences: prefs(displayformat) = short 2009-May-17 19:58:06 LOG2 log_preferences: prefs(logformat) = new 2009-May-17 19:58:06 LOG2 log_preferences: prefs(fontsize) = 4 2009-May-17 19:58:06 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-May-17 19:58:06 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2009-May-17 19:58:06 ALERT executive: CIMA executive ready 2009-May-17 19:58:09 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2009-May-17 19:58:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 19:58:09 LOG4 got_cormsg: From DATATAKING: setup 2009-May-17 19:58:10 NOTE frontend: CIMA frontend ready 2009-May-17 19:58:17 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2009-May-17 19:58:17 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2009-May-17 19:58:17 LOG4 got_cormsg: From DATATAKING: vw% io 2009-May-17 19:58:17 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-May-17 19:58:17 LOG4 got_cormsg: From DATATAKING: 2009-May-17 19:58:17 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2009-May-17 19:58:17 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-May-17 19:58:17 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-May-17 19:58:17 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-May-17 19:58:17 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-May-17 19:58:17 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-May-17 19:58:17 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-May-17 19:58:17 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-May-17 19:58:17 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-May-17 19:58:17 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-May-17 19:58:17 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-May-17 19:58:17 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-May-17 19:58:17 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2009-May-17 19:58:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 19:58:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 19:58:25 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-May-17 19:58:25 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-May-17 19:58:25 LOG5 restart_wapp: Calling 'restart_wapp' 2009-May-17 19:58:25 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-May-17 19:58:25 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-May-17 19:58:25 NOTE restart_wapp: Restarting all WAPPs 2009-May-17 19:58:25 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-May-17 19:58:25 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-May-17 19:58:25 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-May-17 19:58:25 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-May-17 19:58:28 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-May-17 19:58:28 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-May-17 19:58:28 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-May-17 19:58:28 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-May-17 19:59:04 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-May-17 19:59:04 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-May-17 19:59:04 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-May-17 19:59:04 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-May-17 19:59:04 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-May-17 19:59:04 NOTE select_receiver: Starting to select receiver ALFA 2009-May-17 19:59:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-May-17 19:59:04 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2009-May-17 19:59:04 LOG3 vw_send: To DATATAKING: acvlbical off 2009-May-17 19:59:04 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-May-17 19:59:04 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-May-17 19:59:04 LOG5 finish_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-May-17 19:59:04 DONE finish_task: DONE finished selecting: receiver ALFA 2009-May-17 19:59:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-17 19:59:04 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-May-17 19:59:04 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-May-17 19:59:04 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2009-May-17 19:59:04 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-May-17 19:59:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 19:59:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 19:59:44 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 19:59:44.296 (seconds: 71984.296)!} 2009-May-17 19:59:44 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 19:59:44.296 (seconds: 71984.296)! 2009-May-17 19:59:52 INFO1 CIMA-run_command_file: Transferring command file '090517.cmd ' to executive ... 2009-May-17 19:59:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2009-May-17 19:59:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2009-May-17 19:59:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 5 {CATALOG AGESFull.cat} 2009-May-17 19:59:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF LSTSLEW(AGESVC1A_p1_033) < 112230 THEN} 2009-May-17 19:59:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {FIXEDDRIFT az=310.26 alfaangle=61.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p1_033 ra=120900.00 dec=81200.00} 2009-May-17 19:59:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {ENDIF} 2009-May-17 19:59:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 15 {IF LSTSLEW(AGESVC1B_p3_058) < 114429 THEN} 2009-May-17 19:59:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 16 {FIXEDDRIFT az=313.25 alfaangle=58.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_058 ra=122900.00 dec=73430.00} 2009-May-17 19:59:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 19 {ENDIF} 2009-May-17 19:59:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 22 {IF LSTSLEW(AGESVC1B_p3_060) < 120729 THEN} 2009-May-17 19:59:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 23 {FIXEDDRIFT az=333.11 alfaangle=41.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_060 ra=122900.00 dec=73130.00} 2009-May-17 19:59:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 26 {ENDIF} 2009-May-17 19:59:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 29 {IF LSTSLEW(AGESVC1B_p3_062) < 123029 THEN} 2009-May-17 19:59:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 30 {FIXEDDRIFT az=1.31 alfaangle=18.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_062 ra=122900.00 dec=72830.00} 2009-May-17 19:59:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 33 {ENDIF} 2009-May-17 19:59:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 36 {IF LSTSLEW(AGESVC1B_p3_064) < 125329 THEN} 2009-May-17 19:59:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 37 {FIXEDDRIFT az=28.77 alfaangle=-4.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_064 ra=122900.00 dec=72530.00} 2009-May-17 19:59:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 40 {ENDIF} 2009-May-17 19:59:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 43 {IF LSTSLEW(AGESVC1B_p3_066) < 131529 THEN} 2009-May-17 19:59:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 44 {FIXEDDRIFT az=46.89 alfaangle=-20.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_066 ra=122900.00 dec=72230.00} 2009-May-17 19:59:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 47 {ENDIF} 2009-May-17 19:59:52 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-May-17 19:59:52 LOG4 exec_msg: From OBSERVER: run_command_file 090517.cmd 1 1 21 2009-May-17 19:59:52 LOG4 run_command_file: Calling 'run_command_file 090517.cmd 1 1 21' 2009-May-17 19:59:52 BEGIN begin_task: Starting task 'running command file '090517.cmd'' 2009-May-17 19:59:52 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-May-17 19:59:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '090517.cmd' ...} 2009-May-17 19:59:52 NOTE run_command_file: Starting execution of command file '090517.cmd' from line 1 2009-May-17 19:59:52 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2009-May-17 19:59:52 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-May-17 19:59:52 NOTE CIMA-check_config_file: File 'ages_config.conf' contains an ALFA set-up which will be ignored! 2009-May-17 19:59:52 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-17 19:59:52 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-May-17 19:59:52 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-May-17 19:59:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-May-17 19:59:54 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-17 19:59:54 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-May-17 19:59:54 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-May-17 19:59:54 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-May-17 19:59:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-May-17 19:59:54 INFO1 config_iflo: Selecting receiver ALFA 2009-May-17 19:59:54 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-May-17 19:59:54 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-May-17 19:59:54 START begin_task: Starting task 'selecting receiver ALFA' 2009-May-17 19:59:54 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-May-17 19:59:55 NOTE select_receiver: Starting to select receiver ALFA 2009-May-17 19:59:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-May-17 19:59:55 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2009-May-17 19:59:55 LOG3 vw_send: To DATATAKING: acvlbical off 2009-May-17 19:59:55 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-May-17 19:59:55 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-May-17 19:59:55 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-May-17 19:59:55 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-May-17 19:59:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 19:59:55 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-May-17 19:59:55 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-May-17 19:59:55 START begin_task: Starting task 'waiting for receiver ALFA' 2009-May-17 19:59:55 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-May-17 19:59:55 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-May-17 19:59:55 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-May-17 19:59:55 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-May-17 19:59:55 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-May-17 19:59:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 19:59:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-17 19:59:55 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 19:59:55 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-May-17 19:59:55 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 19:59:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 19:59:55 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-May-17 19:59:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 19:59:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-17 19:59:55 LOG3 vw_send: To DATATAKING: alfafb 1 2009-May-17 19:59:55 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-May-17 19:59:55 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-May-17 19:59:55 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-May-17 19:59:55 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-May-17 19:59:55 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-May-17 19:59:55 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-May-17 19:59:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2009-May-17 19:59:55 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-May-17 19:59:55 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-May-17 19:59:55 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-May-17 19:59:55 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-May-17 19:59:55 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-May-17 19:59:55 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-May-17 19:59:55 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-May-17 19:59:55 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-May-17 19:59:55 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-May-17 19:59:55 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-May-17 19:59:55 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-May-17 19:59:55 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-May-17 19:59:55 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-May-17 19:59:55 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-May-17 19:59:55 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-May-17 19:59:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 19:59:55 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-May-17 19:59:55 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-May-17 19:59:55 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-May-17 19:59:55 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-May-17 19:59:55 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-May-17 19:59:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-May-17 19:59:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-17 19:59:55 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-May-17 19:59:55 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-May-17 19:59:55 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2009-May-17 19:59:55 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-May-17 19:59:55 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-May-17 19:59:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-May-17 19:59:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-May-17 19:59:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-May-17 19:59:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-May-17 19:59:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2009-May-17 19:59:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-May-17 19:59:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-May-17 19:59:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-May-17 19:59:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-May-17 19:59:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-May-17 19:59:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-May-17 19:59:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-May-17 19:59:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-May-17 19:59:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-May-17 19:59:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 19:59:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-May-17 19:59:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-May-17 19:59:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-May-17 19:59:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-May-17 19:59:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-17 20:00:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:11 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-17 20:00:11 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-May-17 20:00:11 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-May-17 20:00:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-May-17 20:00:11 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-May-17 20:00:11 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-May-17 20:00:11 DONE finish_task: DONE finished configuration: IF/LO path 2009-May-17 20:00:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-17 20:00:12 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-May-17 20:00:12 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-May-17 20:00:12 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-May-17 20:00:12 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-May-17 20:00:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-May-17 20:00:12 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-May-17 20:00:12 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-May-17 20:00:12 START begin_task: Starting task 'selecting calibration port' 2009-May-17 20:00:12 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-May-17 20:00:12 LOG3 vw_send: To DATATAKING: calport 3 2009-May-17 20:00:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-May-17 20:00:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-17 20:00:12 START begin_task: Starting task 'waiting on calport' 2009-May-17 20:00:12 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-May-17 20:00:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:12 LOG4 got_cormsg: From DATATAKING: calport 3 2009-May-17 20:00:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-17 20:00:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:12 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-17 20:00:12 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-May-17 20:00:12 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-May-17 20:00:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-May-17 20:00:12 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-May-17 20:00:12 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-May-17 20:00:12 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-17 20:00:12 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-17 20:00:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-17 20:00:12 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-May-17 20:00:12 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-17 20:00:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-17 20:00:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-17 20:00:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-17 20:00:12 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-May-17 20:00:12 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-May-17 20:00:12 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-May-17 20:00:12 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-May-17 20:00:12 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-May-17 20:00:12 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-May-17 20:00:12 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-May-17 20:00:12 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-May-17 20:00:12 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-May-17 20:00:12 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-May-17 20:00:12 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-May-17 20:00:12 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-May-17 20:00:12 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-May-17 20:00:12 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-May-17 20:00:12 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-May-17 20:00:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-17 20:00:12 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-May-17 20:00:12 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-17 20:00:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-17 20:00:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-17 20:00:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-17 20:00:12 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-May-17 20:00:13 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-May-17 20:00:13 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-May-17 20:00:13 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-May-17 20:00:13 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-May-17 20:00:13 STOP finish_task: Finishing task 'configuring WAPPs' 2009-May-17 20:00:13 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-May-17 20:00:13 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-May-17 20:00:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-17 20:00:13 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-May-17 20:00:13 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-May-17 20:00:13 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2009-May-17 20:00:13 COMMAND run_command_line: EXECUTING command 5: 'CATALOG AGESFull.cat' 2009-May-17 20:00:13 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2009-May-17 20:00:13 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGESVC1A_p1_033) < 112230 THEN' 2009-May-17 20:00:13 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1A_p1_033) < 112230 2009-May-17 20:00:13 INFO5 is_if_valid: Condition parsed as: 11.312220333333334 < 11.375 2009-May-17 20:00:13 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=310.26 alfaangle=61.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p1_033 ra=120900.00 dec=81200.00' 2009-May-17 20:00:13 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-May-17 20:00:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-May-17 20:00:13 NOTE WAPPDATA-new_file: New FITS file: wapp.20090517.a2048.0000.fits 2009-May-17 20:00:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-May-17 20:00:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-May-17 20:00:13 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090517.a2048.0000.fits} 2009-May-17 20:00:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-May-17 20:00:20 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-17 20:00:20 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 310.26 61.7 hcorcal 5 tracking no first 1 AGESVC1A_p1_033 120900.00 81200.00 J 8500.0 Heliocentric velocity(optical)' 2009-May-17 20:00:20 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-May-17 20:00:20 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-May-17 20:00:20 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on '09432+1910' 2009-May-17 20:00:21 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-May-17 20:00:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p1_033} 2009-May-17 20:00:21 INFO3 fixed_driftmap: Sending telescope to Az = 310.26 and ZA = 15.31 2009-May-17 20:00:21 LOG3 track_source: Calling 'track_source AGESVC1A_p1_033 310.26 15.3149759327 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-17 20:00:21 START begin_task: Starting task 'sending tracking commands' 2009-May-17 20:00:21 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-May-17 20:00:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p1_033} INFO {Slewing to source 'AGESVC1A_p1_033' ...} 2009-May-17 20:00:21 INFO1 track_source: Starting to track AGESVC1A_p1_033 2009-May-17 20:00:21 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p1_033" 2009-May-17 20:00:21 LOG3 vw_send: To DATATAKING: set ra 310.26 2009-May-17 20:00:21 LOG3 vw_send: To DATATAKING: set dec 15.3149759327 2009-May-17 20:00:21 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-17 20:00:21 LOG3 vw_send: To DATATAKING: pnt tr 310.26 15.3149759327 -CF 2009-May-17 20:00:21 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-17 20:00:21 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-17 20:00:21 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-May-17 20:00:21 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-17 20:00:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:00:21 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-17 20:00:21 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-May-17 20:00:21 START begin_task: Starting task 'rotate ALFA to +61.7 degrees' 2009-May-17 20:00:21 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2009-May-17 20:00:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +61.7 degrees ...} 2009-May-17 20:00:21 INFO2 rotate_alfa: ALFA commanded to +61.7 degrees 2009-May-17 20:00:21 LOG3 sock_errsend: To ALFAMOTOR: POSITION 61.7 REPLY 2009-May-17 20:00:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-May-17 20:00:21 START begin_task: Starting task 'waiting on ALFA rotation' 2009-May-17 20:00:21 LOG5 begin_task: Level: (4) ID = <10017> Status = 0 0 0 0 ok 2009-May-17 20:00:21 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p1_033" 2009-May-17 20:00:21 LOG4 got_cormsg: From DATATAKING: set ra 310.26 2009-May-17 20:00:21 LOG4 got_cormsg: From DATATAKING: set dec 15.3149759327 2009-May-17 20:00:21 LOG4 got_cormsg: From DATATAKING: vw% 310.26 2009-May-17 20:00:21 LOG4 got_cormsg: From DATATAKING: vw% 15.3149759327 2009-May-17 20:00:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:21 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-17 20:00:21 LOG4 got_cormsg: From DATATAKING: pnt tr 310.26 15.3149759327 -CF 2009-May-17 20:00:21 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-17 20:00:21 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-17 20:00:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:00:40 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-May-17 20:00:40 INFO3 alfa_motor: ALFA rotator in-position +61.70 degrees 2009-May-17 20:00:40 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-May-17 20:00:40 LOG5 end_task: Level: (4) ID = <10017> Status = 0 0 0 0 ok 2009-May-17 20:00:40 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-17 20:00:40 STOP finish_task: Finishing task 'rotate ALFA to +61.7 degrees' 2009-May-17 20:00:40 LOG5 finish_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2009-May-17 20:00:40 INFO2 finish_task: DONE finished configuration: rotating ALFA to +61.7 degrees 2009-May-17 20:00:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:00:40 STOP end_task: Finishing task 'rotate ALFA to +61.7 degrees' with status 'OK' 2009-May-17 20:00:40 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2009-May-17 20:00:40 START begin_task: Starting task 'waiting on telescope' 2009-May-17 20:00:40 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2009-May-17 20:00:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-17 20:00:40 LOG3 waittrk: Start waittrk 5 2009-May-17 20:00:40 START begin_task: Starting task 'waiting on telescope movement' 2009-May-17 20:00:40 LOG5 begin_task: Level: (4) ID = <10019> Status = 0 0 0 0 ok 2009-May-17 20:00:45 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-17 20:00:45 LOG5 end_task: Level: (4) ID = <10019> Status = 0 0 0 0 ok 2009-May-17 20:00:45 START begin_task: Starting task 'waiting on telescope on source' 2009-May-17 20:00:45 LOG5 begin_task: Level: (4) ID = <10020> Status = 0 0 0 0 ok 2009-May-17 20:02:58 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-17 20:02:58 LOG5 end_task: Level: (4) ID = <10020> Status = 0 0 0 0 ok 2009-May-17 20:02:58 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-17 20:02:58 INFO2 waittrk: Now tracking AGESVC1A_p1_033 2009-May-17 20:02:58 LOG4 waittrk: Current telescope position: Az = 309.88 ZA = 15.31 2009-May-17 20:02:58 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-17 20:02:58 LOG5 finish_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2009-May-17 20:02:58 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-17 20:02:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:02:58 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-17 20:02:58 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2009-May-17 20:02:58 START begin_task: Starting task 'selecting calibration type' 2009-May-17 20:02:58 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2009-May-17 20:02:58 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-17 20:02:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-17 20:02:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-17 20:02:59 START begin_task: Starting task 'waiting on setcal' 2009-May-17 20:02:59 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2009-May-17 20:02:59 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-17 20:02:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-17 20:02:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:02:59 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-17 20:02:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-17 20:02:59 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2009-May-17 20:02:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-17 20:02:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 20:02:59 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-17 20:02:59 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 20:02:59 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-May-17 20:02:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:02:59 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 20:02:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 20:02:59 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-May-17 20:02:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 20:02:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-17 20:02:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 20:02:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-17 20:02:59 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 20:02:59 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-May-17 20:02:59 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 20:02:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 20:02:59 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-May-17 20:02:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 20:02:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-17 20:02:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-17 20:02:59 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2009-May-17 20:02:59 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-May-17 20:02:59 INFO2 astwait: Waiting for 137 seconds from 00:02:59 to 00:05:16 UTC ... 2009-May-17 20:02:59 LOG4 send_obs_status: To obs_status: <1> TASKTIME 137 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-17 20:02:59 START begin_task: Starting task 'waiting on waiting for AST time' 2009-May-17 20:02:59 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2009-May-17 20:05:16 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-May-17 20:05:16 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2009-May-17 20:05:16 INFO3 astwait: Finished waiting 2009-May-17 20:05:16 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-17 20:05:16 LOG5 dopset_later: Calling 'dopset_later 60.746083307084547' 2009-May-17 20:05:16 INFO3 dopset_later: Setting Doppler correction for 20:06:16 (60.7 seconds from now) 2009-May-17 20:05:16 LOG5 antvel: Calling 'antvel 310.260000 15.314976 F 60.746083307084547' 2009-May-17 20:05:16 LOG2 antvel: Transforming current Az = 310.26 ZA = 15.31 to apparent RA = 12:09:30.2 Dec = +08:08:44.8 2009-May-17 20:05:16 LOG2 antvel: Parameters to Doppler: Heliocentric 86776 2009 137 0.0 2009-May-17 20:05:16 INFO5 antvel: Computed antenna velocity: +24.49769 km/s 2009-May-17 20:05:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=24.4976850601 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-May-17 20:05:16 INFO4 dopset_gen: New sky frequencies: 1381.130569 1381.130569 1381.130569 1381.130569 1381.130569 1381.130569 1381.130569 1381.130569 1381.130569 2009-May-17 20:05:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.130569 sky0=1381.130569 sky1=1381.130569 sky2=1381.130569 sky3=1381.130569 sky4=1381.130569 sky5=1381.130569 sky6=1381.130569 sky7=1381.130569 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 20:05:16 LOG2 dopset_gen: Result from 'sky2syn': 1631.130569 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 20:05:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631130569.0} 2009-May-17 20:05:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 20:05:16 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-May-17 20:05:16 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-May-17 20:05:16 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.7 Dec = +08:11:52.6 2009-May-17 20:05:16 LOG3 track_source: Calling 'track_source AGESVC1A_p1_033 120803.7 081152.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-17 20:05:16 START begin_task: Starting task 'sending tracking commands' 2009-May-17 20:05:16 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-May-17 20:05:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p1_033} INFO {Slewing to source 'AGESVC1A_p1_033' ...} 2009-May-17 20:05:16 INFO1 track_source: Starting to track AGESVC1A_p1_033 2009-May-17 20:05:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p1_033" 2009-May-17 20:05:16 LOG3 vw_send: To DATATAKING: set ra 120803.7 2009-May-17 20:05:16 LOG3 vw_send: To DATATAKING: set dec 081152.6 2009-May-17 20:05:16 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-17 20:05:16 LOG3 vw_send: To DATATAKING: pnt tr 120803.7 081152.6 -CJ 2009-May-17 20:05:16 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-17 20:05:16 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-17 20:05:16 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-May-17 20:05:16 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-17 20:05:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:05:16 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-17 20:05:16 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-May-17 20:05:16 START begin_task: Starting task 'waiting on telescope' 2009-May-17 20:05:16 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-May-17 20:05:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-17 20:05:16 LOG3 waittrk: Start waittrk 5 2009-May-17 20:05:16 START begin_task: Starting task 'waiting on telescope movement' 2009-May-17 20:05:16 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-May-17 20:05:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631130569.0} 2009-May-17 20:05:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 20:05:16 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p1_033" 2009-May-17 20:05:16 LOG4 got_cormsg: From DATATAKING: set ra 120803.7 2009-May-17 20:05:16 LOG4 got_cormsg: From DATATAKING: set dec 081152.6 2009-May-17 20:05:16 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-17 20:05:16 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-17 20:05:16 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.7 081152.6 -CJ 2009-May-17 20:05:16 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-17 20:05:16 LOG4 got_cormsg: From DATATAKING: vw% 120803.7 2009-May-17 20:05:16 LOG4 got_cormsg: From DATATAKING: vw% 081152.6 2009-May-17 20:05:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:05:16 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2009-May-17 20:05:21 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-17 20:05:21 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-May-17 20:05:21 START begin_task: Starting task 'waiting on telescope on source' 2009-May-17 20:05:21 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-May-17 20:05:23 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-17 20:05:23 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-May-17 20:05:23 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-17 20:05:23 INFO2 waittrk: Now tracking AGESVC1A_p1_033 2009-May-17 20:05:23 LOG4 waittrk: Current telescope position: Az = 309.93 ZA = 15.30 2009-May-17 20:05:23 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-17 20:05:23 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-May-17 20:05:23 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-17 20:05:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:05:23 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-17 20:05:23 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-May-17 20:05:23 START begin_task: Starting task 'adjusting WAPP power' 2009-May-17 20:05:23 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2009-May-17 20:05:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-May-17 20:05:23 INFO2 adjust_power: Starting to adjust WAPP power 2009-May-17 20:05:23 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-May-17 20:05:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-May-17 20:05:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-17 20:05:23 START begin_task: Starting task 'waiting on adjpwrif2' 2009-May-17 20:05:23 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2009-May-17 20:05:23 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-May-17 20:05:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-17 20:05:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:05:26 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-17 20:05:26 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-May-17 20:05:26 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2009-May-17 20:05:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-May-17 20:05:26 START begin_task: Starting task 'adjusting WAPP power' 2009-May-17 20:05:26 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-May-17 20:05:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-May-17 20:05:26 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 20:05:26 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 20:05:26 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 20:05:26 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 20:05:26 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-May-17 20:05:26 LOG5 begin_task: Level: (5) ID = <10033> Status = 0 0 0 0 ok 2009-May-17 20:05:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:05:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-May-17 20:05:27 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 7 7 dB 2009-May-17 20:05:27 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 5 dB 2009-May-17 20:05:27 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 7 4 dB --- beam 3: 4 3 dB 2009-May-17 20:05:27 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 4 0 dB 2009-May-17 20:05:27 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-May-17 20:05:27 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-May-17 20:05:27 LOG5 end_task: Level: (5) ID = <10033> Status = 0 0 0 0 ok 2009-May-17 20:05:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.100 1.013 ALFA beam 1: 0.981 0.973 2009-May-17 20:05:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.924 1.101 ALFA beam 3: 0.995 0.965 2009-May-17 20:05:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.009 0.950 ALFA beam 5: 0.968 0.902 2009-May-17 20:05:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.013 0.108 ALFA beam 7: 0.892 0.133 2009-May-17 20:05:27 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-17 20:05:27 LOG5 finish_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-May-17 20:05:27 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-May-17 20:05:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:05:27 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-17 20:05:27 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-May-17 20:05:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-17 20:05:27 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-17 20:05:27 LOG5 finish_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2009-May-17 20:05:27 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-May-17 20:05:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:05:27 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-17 20:05:27 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2009-May-17 20:05:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-May-17 20:05:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-May-17 20:05:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-May-17 20:05:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-May-17 20:05:27 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090517.a2048.0000.fits' is empty! 2009-May-17 20:05:27 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-May-17 20:05:27 START begin_task: Starting task 'WAPP calibration' 2009-May-17 20:05:27 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2009-May-17 20:05:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-May-17 20:05:27 START begin_task: Starting task 'selecting calibration type' 2009-May-17 20:05:27 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2009-May-17 20:05:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-17 20:05:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-17 20:05:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-17 20:05:27 START begin_task: Starting task 'waiting on setcal' 2009-May-17 20:05:27 LOG5 begin_task: Level: (5) ID = <10036> Status = 0 0 0 0 ok 2009-May-17 20:05:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-May-17 20:05:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-17 20:05:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-17 20:05:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:05:28 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-17 20:05:28 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-17 20:05:28 LOG5 end_task: Level: (5) ID = <10036> Status = 0 0 0 0 ok 2009-May-17 20:05:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-17 20:05:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 20:05:28 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-17 20:05:28 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 20:05:28 LOG5 begin_task: Level: (5) ID = <10037> Status = 0 0 0 0 ok 2009-May-17 20:05:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:05:28 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 20:05:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 20:05:28 LOG5 end_task: Level: (5) ID = <10037> Status = 0 0 0 0 ok 2009-May-17 20:05:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 20:05:28 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-17 20:05:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 20:05:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-17 20:05:28 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 20:05:28 LOG5 begin_task: Level: (5) ID = <10038> Status = 0 0 0 0 ok 2009-May-17 20:05:28 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 20:05:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 20:05:28 LOG5 end_task: Level: (5) ID = <10038> Status = 0 0 0 0 ok 2009-May-17 20:05:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 20:05:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-17 20:05:28 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-17 20:05:28 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2009-May-17 20:05:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-May-17 20:05:28 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-May-17 20:05:28 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-May-17 20:05:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-17 20:05:28 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2009-May-17 20:05:28 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-17 20:05:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-May-17 20:05:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-17 20:05:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-17 20:05:28 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2009-May-17 20:05:28 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-May-17 20:05:28 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-May-17 20:05:28 START begin_task: Starting task 'WAPP spectral observation' 2009-May-17 20:05:28 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-May-17 20:05:28 LOG5 log_alfabeam: Parameters: 12.13436111111111 8.1979444444444471 11.361905 2009.3773774938525 61.699913 2009-May-17 20:05:28 LOG4 log_alfabeam: ALFABEAM 0 12.134361111111106 8.197944444444447 2009-May-17 20:05:28 LOG4 log_alfabeam: ALFABEAM 1 12.132088018617239 8.294853252825499 2009-May-17 20:05:28 LOG4 log_alfabeam: ALFABEAM 2 12.127755235857231 8.230644680968426 2009-May-17 20:05:28 LOG4 log_alfabeam: ALFABEAM 3 12.129991340652634 8.133553049961407 2009-May-17 20:05:28 LOG4 log_alfabeam: ALFABEAM 4 12.136600243017869 8.100726702615015 2009-May-17 20:05:28 LOG4 log_alfabeam: ALFABEAM 5 12.140983916536300 8.165681612472715 2009-May-17 20:05:28 LOG4 log_alfabeam: ALFABEAM 6 12.138707764444353 8.262716356868111 2009-May-17 20:05:28 INFO2 take_data: Starting WAPP scan: 913700200 2009-May-17 20:05:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-May-17 20:05:29 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-17 20:05:29 LOG5 begin_task: Level: (5) ID = <10041> Status = 0 0 0 0 ok 2009-May-17 20:05:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 20:05:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)! 2009-May-17 20:05:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.013 0.981 0.973 2009-May-17 20:05:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 1.101 0.995 0.965 2009-May-17 20:05:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.009 0.950 0.968 0.902 2009-May-17 20:05:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.013 0.108 0.892 0.133 2009-May-17 20:05:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 330.00 2009-May-17 20:05:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.130569 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 20:05:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.130569 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 20:05:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.130569 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 20:05:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.130569 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 20:05:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.130569 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 20:05:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.130569 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 20:05:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.130569 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 20:05:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.130569 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 20:05:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.130569 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 20:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.508 (still bad) 2009-May-17 20:05:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 20:05:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-17 20:05:35 LOG5 end_task: Level: (5) ID = <10041> Status = 0 0 0 0 ok 2009-May-17 20:05:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-17 20:05:35 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-May-17 20:05:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-May-17 20:05:35 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-17 20:05:35 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-17 20:05:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-17 20:05:35 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-May-17 20:05:35 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-17 20:05:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-17 20:05:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-17 20:05:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-17 20:05:35 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-May-17 20:05:35 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-May-17 20:05:35 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-May-17 20:05:35 START begin_task: Starting task 'WAPP spectral observation' 2009-May-17 20:05:35 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2009-May-17 20:05:35 LOG5 log_alfabeam: Parameters: 12.13436111111111 8.1979444444444471 11.363855 2009.3773777156691 61.699913 2009-May-17 20:05:35 LOG4 log_alfabeam: ALFABEAM 0 12.134361111111106 8.197944444444452 2009-May-17 20:05:35 LOG4 log_alfabeam: ALFABEAM 1 12.132095779826725 8.294893194320823 2009-May-17 20:05:35 LOG4 log_alfabeam: ALFABEAM 2 12.127757878744655 8.230761915215796 2009-May-17 20:05:35 LOG4 log_alfabeam: ALFABEAM 3 12.129986155904446 8.133630725288716 2009-May-17 20:05:35 LOG4 log_alfabeam: ALFABEAM 4 12.136592412827667 8.100686918489902 2009-May-17 20:05:35 LOG4 log_alfabeam: ALFABEAM 5 12.140981333463142 8.165564748553201 2009-May-17 20:05:35 LOG4 log_alfabeam: ALFABEAM 6 12.138712945001540 8.262639659222909 2009-May-17 20:05:35 INFO2 take_data: Starting WAPP scan: 913700201 2009-May-17 20:05:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-May-17 20:05:36 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-17 20:05:36 LOG5 begin_task: Level: (5) ID = <10044> Status = 0 0 0 0 ok 2009-May-17 20:05:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 20:05:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 337.00 2009-May-17 20:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.508 (still bad) 2009-May-17 20:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.130569 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 20:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.130569 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 20:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.130569 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 20:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.130569 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 20:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.130569 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 20:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.130569 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 20:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.130569 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 20:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.130569 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 20:05:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.130569 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 20:05:42 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-May-17 20:05:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 20:05:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-17 20:05:42 LOG5 end_task: Level: (5) ID = <10044> Status = 0 0 0 0 ok 2009-May-17 20:05:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-17 20:05:42 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2009-May-17 20:05:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-17 20:05:42 STOP finish_task: Finishing task 'WAPP calibration' 2009-May-17 20:05:42 LOG5 finish_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2009-May-17 20:05:42 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-May-17 20:05:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:05:42 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-May-17 20:05:42 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2009-May-17 20:05:42 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-May-17 20:05:42 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 310.26 and ZA = 15.31 2009-May-17 20:05:42 LOG3 track_source: Calling 'track_source AGESVC1A_p1_033 310.26 15.3149759327 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-17 20:05:42 START begin_task: Starting task 'sending tracking commands' 2009-May-17 20:05:42 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-May-17 20:05:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p1_033} INFO {Slewing to source 'AGESVC1A_p1_033' ...} 2009-May-17 20:05:42 INFO1 track_source: Starting to track AGESVC1A_p1_033 2009-May-17 20:05:42 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p1_033" 2009-May-17 20:05:42 LOG3 vw_send: To DATATAKING: set ra 310.26 2009-May-17 20:05:42 LOG3 vw_send: To DATATAKING: set dec 15.3149759327 2009-May-17 20:05:42 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-17 20:05:42 LOG3 vw_send: To DATATAKING: pnt tr 310.26 15.3149759327 -CF 2009-May-17 20:05:42 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-17 20:05:42 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-17 20:05:42 LOG5 finish_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-May-17 20:05:42 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-17 20:05:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:05:43 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-17 20:05:43 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-May-17 20:05:43 LOG1 fixed_driftmap: Parameters: HA = -00:46:59.6 Start = 11:22:30.7 LST = 11:21:56.9 diff = 33.8 secs 2009-May-17 20:05:43 INFO2 fixed_driftmap: Waiting 31.8 seconds for RA 12:09:30 2009-May-17 20:05:43 INFO2 lstwait: Waiting for 31.8 secs from LST 11:21:57 to LST 11:22:29 ... 2009-May-17 20:05:43 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.753461495879552 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-17 20:05:43 START begin_task: Starting task 'waiting on wait on LST' 2009-May-17 20:05:43 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-May-17 20:05:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p1_033" 2009-May-17 20:05:43 LOG4 got_cormsg: From DATATAKING: set ra 310.26 2009-May-17 20:05:43 LOG4 got_cormsg: From DATATAKING: set dec 15.3149759327 2009-May-17 20:05:43 LOG4 got_cormsg: From DATATAKING: vw% 310.26 2009-May-17 20:05:43 LOG4 got_cormsg: From DATATAKING: vw% 15.3149759327 2009-May-17 20:05:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:05:43 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-17 20:05:43 LOG4 got_cormsg: From DATATAKING: pnt tr 310.26 15.3149759327 -CF 2009-May-17 20:05:43 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-17 20:05:43 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-17 20:05:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:06:14 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-May-17 20:06:14 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-May-17 20:06:14 LOG4 lstwait: Finished waiting 0.25 seconds late 2009-May-17 20:06:14 INFO3 lstwait: Finished waiting 2009-May-17 20:06:14 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-17 20:06:14 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-May-17 20:06:14 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-May-17 20:06:14 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-May-17 20:06:15 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-May-17 20:06:15 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-May-17 20:06:15 START begin_task: Starting task 'WAPP spectral observation' 2009-May-17 20:06:15 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2009-May-17 20:06:15 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-May-17 20:06:15 INFO2 take_data: Starting WAPP scan: 913700202 2009-May-17 20:06:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-May-17 20:06:15 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-17 20:06:15 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2009-May-17 20:06:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 20:06:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 376.00 2009-May-17 20:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.130569 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 20:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.130569 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 20:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.130569 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 20:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.130569 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 20:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.130569 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 20:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.130569 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 20:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.130569 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 20:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.130569 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 20:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.130569 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 20:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 20:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:06:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:06:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.014 0.982 0.975 2009-May-17 20:06:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 1.098 1.001 0.979 2009-May-17 20:06:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.023 0.962 0.970 0.901 2009-May-17 20:06:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.110 0.892 0.136 2009-May-17 20:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 20:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 20:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 20:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 20:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 20:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 20:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 20:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 20:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 20:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 20:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 20:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-May-17 20:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 20:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:07:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:07:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.012 0.981 0.974 2009-May-17 20:07:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 1.101 1.000 0.981 2009-May-17 20:07:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.024 0.963 0.968 0.902 2009-May-17 20:07:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 0.110 0.899 0.136 2009-May-17 20:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-May-17 20:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 20:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 20:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 20:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 20:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 20:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 20:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 20:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 20:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 20:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 20:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 20:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 20:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 20:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 20:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 20:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 20:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:08:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:08:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 1.012 0.982 0.975 2009-May-17 20:08:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 1.101 1.001 0.981 2009-May-17 20:08:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.026 0.968 0.968 0.899 2009-May-17 20:08:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.031 0.110 0.892 0.136 2009-May-17 20:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 20:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 20:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 20:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 20:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 20:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 20:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 20:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 20:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 20:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 20:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:09:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:09:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 1.012 0.979 0.974 2009-May-17 20:09:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 1.099 0.999 0.979 2009-May-17 20:09:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.023 0.963 0.968 0.900 2009-May-17 20:09:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.031 0.110 0.893 0.136 2009-May-17 20:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 20:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 20:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 20:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 20:10:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:10:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.013 0.977 0.971 2009-May-17 20:10:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 1.098 1.002 0.982 2009-May-17 20:10:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.021 0.964 0.966 0.900 2009-May-17 20:10:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.110 0.894 0.136 2009-May-17 20:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 20:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 20:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 20:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 20:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 20:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 20:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 20:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 20:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 20:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 20:11:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:11:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.009 0.976 0.972 2009-May-17 20:11:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 1.099 0.997 0.978 2009-May-17 20:11:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.020 0.962 0.967 0.897 2009-May-17 20:11:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.029 0.110 0.890 0.136 2009-May-17 20:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 20:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 20:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 20:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 20:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:12:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:12:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.098 1.008 0.975 0.971 2009-May-17 20:12:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 1.097 0.995 0.974 2009-May-17 20:12:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.018 0.961 0.967 0.896 2009-May-17 20:12:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.110 0.891 0.136 2009-May-17 20:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 20:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 20:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 20:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 20:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 20:13:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:13:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.107 1.015 0.978 0.971 2009-May-17 20:13:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.921 1.102 0.997 0.976 2009-May-17 20:13:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.020 0.960 0.966 0.895 2009-May-17 20:13:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.110 0.891 0.136 2009-May-17 20:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 20:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 20:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:14:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:14:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.095 1.004 0.975 0.969 2009-May-17 20:14:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 1.098 0.995 0.973 2009-May-17 20:14:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.018 0.959 0.964 0.894 2009-May-17 20:14:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.110 0.890 0.136 2009-May-17 20:14:43 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 20:14:43.298 (seconds: 72883.298)!} 2009-May-17 20:14:43 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 20:14:43.298 (seconds: 72883.298)! 2009-May-17 20:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:14:44 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 72882.0 to 72883.0! 2009-May-17 20:14:45 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (72882.0 - 72884.0)! 2009-May-17 20:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 20:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 20:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:15:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:15:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.094 1.005 0.974 0.968 2009-May-17 20:15:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 1.095 0.994 0.973 2009-May-17 20:15:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.014 0.958 0.961 0.894 2009-May-17 20:15:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.110 0.890 0.136 2009-May-17 20:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:16:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:16:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 1.003 0.972 0.967 2009-May-17 20:16:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 1.091 0.994 0.974 2009-May-17 20:16:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.011 0.954 0.961 0.894 2009-May-17 20:16:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.110 0.889 0.136 2009-May-17 20:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.091 (still bad) 2009-May-17 20:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.091 (still bad) 2009-May-17 20:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.091 (still bad) 2009-May-17 20:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.091 (still bad) 2009-May-17 20:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:17:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:17:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.095 1.001 0.973 0.969 2009-May-17 20:17:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 1.098 1.004 0.984 2009-May-17 20:17:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.011 0.957 0.964 0.897 2009-May-17 20:17:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.031 0.110 0.896 0.136 2009-May-17 20:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.088 (still bad) 2009-May-17 20:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.091 (still bad) 2009-May-17 20:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.090 (still bad) 2009-May-17 20:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.090 (still bad) 2009-May-17 20:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.091 (still bad) 2009-May-17 20:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.089 (still bad) 2009-May-17 20:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.089 (still bad) 2009-May-17 20:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.090 (still bad) 2009-May-17 20:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.088 (still bad) 2009-May-17 20:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.089 (still bad) 2009-May-17 20:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.090 (still bad) 2009-May-17 20:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.090 (still bad) 2009-May-17 20:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.091 (still bad) 2009-May-17 20:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:18:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:18:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 0.997 0.972 0.968 2009-May-17 20:18:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 1.090 0.991 0.970 2009-May-17 20:18:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.004 0.954 0.956 0.893 2009-May-17 20:18:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.110 0.890 0.135 2009-May-17 20:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.089 (still bad) 2009-May-17 20:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.091 (still bad) 2009-May-17 20:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.090 (still bad) 2009-May-17 20:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.089 (still bad) 2009-May-17 20:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.089 (still bad) 2009-May-17 20:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.090 (still bad) 2009-May-17 20:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.088 (still bad) 2009-May-17 20:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.089 (still bad) 2009-May-17 20:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.090 (still bad) 2009-May-17 20:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.090 (still bad) 2009-May-17 20:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.089 (still bad) 2009-May-17 20:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.088 (still bad) 2009-May-17 20:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.089 (still bad) 2009-May-17 20:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.090 (still bad) 2009-May-17 20:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.089 (still bad) 2009-May-17 20:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.091 (still bad) 2009-May-17 20:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.091 (still bad) 2009-May-17 20:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:19:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:19:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.000 0.966 0.964 2009-May-17 20:19:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 1.087 0.992 0.969 2009-May-17 20:19:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.011 0.959 0.961 0.894 2009-May-17 20:19:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.110 0.889 0.136 2009-May-17 20:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.090 (still bad) 2009-May-17 20:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.089 (still bad) 2009-May-17 20:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.090 (still bad) 2009-May-17 20:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.091 (still bad) 2009-May-17 20:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.089 (still bad) 2009-May-17 20:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.090 (still bad) 2009-May-17 20:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.089 (still bad) 2009-May-17 20:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.091 (still bad) 2009-May-17 20:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:20:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:20:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.089 1.000 0.967 0.963 2009-May-17 20:20:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 1.090 0.991 0.970 2009-May-17 20:20:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.004 0.951 0.958 0.893 2009-May-17 20:20:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.110 0.889 0.135 2009-May-17 20:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.091 (still bad) 2009-May-17 20:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.091 (still bad) 2009-May-17 20:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.091 (still bad) 2009-May-17 20:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:21:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:21:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.097 1.004 0.970 0.965 2009-May-17 20:21:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 1.095 0.995 0.973 2009-May-17 20:21:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.009 0.956 0.960 0.896 2009-May-17 20:21:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.110 0.889 0.135 2009-May-17 20:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.091 (still bad) 2009-May-17 20:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 20:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 20:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:22:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:22:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 1.001 0.968 0.963 2009-May-17 20:22:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 1.092 0.991 0.970 2009-May-17 20:22:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.008 0.959 0.960 0.896 2009-May-17 20:22:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.110 0.887 0.135 2009-May-17 20:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 20:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 20:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 20:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:23:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:23:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 1.000 0.969 0.965 2009-May-17 20:23:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 1.096 0.991 0.971 2009-May-17 20:23:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.009 0.956 0.962 0.895 2009-May-17 20:23:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.110 0.886 0.135 2009-May-17 20:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 20:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 20:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 20:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 20:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 20:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 20:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 20:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 20:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:24:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:24:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.095 1.001 0.968 0.964 2009-May-17 20:24:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 1.094 0.991 0.969 2009-May-17 20:24:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.009 0.958 0.958 0.894 2009-May-17 20:24:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.110 0.887 0.135 2009-May-17 20:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 20:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 20:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 20:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.096 (still bad) 2009-May-17 20:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:25:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:25:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.006 0.970 0.966 2009-May-17 20:25:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 1.096 0.994 0.973 2009-May-17 20:25:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 0.958 0.959 0.898 2009-May-17 20:25:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.110 0.885 0.135 2009-May-17 20:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 20:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 20:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 20:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 20:26:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 20:26:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-17 20:26:16 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2009-May-17 20:26:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-17 20:26:16 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2009-May-17 20:26:16 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-May-17 20:26:16 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-May-17 20:26:16 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-May-17 20:26:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-17 20:26:16 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-May-17 20:26:16 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-May-17 20:26:16 COMMAND run_command_line: EXECUTING command 12: 'ENDIF' 2009-May-17 20:26:16 COMMAND run_command_line: EXECUTING command 15: 'IF LSTSLEW(AGESVC1B_p3_058) < 114429 THEN' 2009-May-17 20:26:17 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1B_p3_058) < 114429 2009-May-17 20:26:17 INFO5 is_if_valid: Condition parsed as: 11.712854333333334 < 11.741388888888888 2009-May-17 20:26:17 COMMAND run_command_line: EXECUTING command 16: 'FIXEDDRIFT az=313.25 alfaangle=58.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_058 ra=122900.00 dec=73430.00' 2009-May-17 20:26:17 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-May-17 20:26:17 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-17 20:26:17 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 313.25 58.9 hcorcal 5 tracking no first 1 AGESVC1B_p3_058 122900.00 73430.00 J 8500.0 Heliocentric velocity(optical)' 2009-May-17 20:26:17 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-May-17 20:26:17 LOG5 begin_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2009-May-17 20:26:17 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p1_033' 2009-May-17 20:26:17 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-May-17 20:26:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p3_058} 2009-May-17 20:26:17 INFO3 fixed_driftmap: Sending telescope to Az = 313.25 and ZA = 15.40 2009-May-17 20:26:17 LOG3 track_source: Calling 'track_source AGESVC1B_p3_058 313.25 15.3992462594 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-17 20:26:17 START begin_task: Starting task 'sending tracking commands' 2009-May-17 20:26:17 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-May-17 20:26:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_058} INFO {Slewing to source 'AGESVC1B_p3_058' ...} 2009-May-17 20:26:17 INFO1 track_source: Starting to track AGESVC1B_p3_058 2009-May-17 20:26:17 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_058" 2009-May-17 20:26:17 LOG3 vw_send: To DATATAKING: set ra 313.25 2009-May-17 20:26:17 LOG3 vw_send: To DATATAKING: set dec 15.3992462594 2009-May-17 20:26:17 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-17 20:26:17 LOG3 vw_send: To DATATAKING: pnt tr 313.25 15.3992462594 -CF 2009-May-17 20:26:17 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-17 20:26:17 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-17 20:26:17 LOG5 finish_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-May-17 20:26:17 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-17 20:26:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:26:17 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-17 20:26:17 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-May-17 20:26:17 START begin_task: Starting task 'rotate ALFA to +58.9 degrees' 2009-May-17 20:26:17 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2009-May-17 20:26:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +58.9 degrees ...} 2009-May-17 20:26:18 INFO2 rotate_alfa: ALFA commanded to +58.9 degrees 2009-May-17 20:26:18 LOG3 sock_errsend: To ALFAMOTOR: POSITION 58.9 REPLY 2009-May-17 20:26:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-May-17 20:26:18 START begin_task: Starting task 'waiting on ALFA rotation' 2009-May-17 20:26:18 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2009-May-17 20:26:18 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_058" 2009-May-17 20:26:18 LOG4 got_cormsg: From DATATAKING: set ra 313.25 2009-May-17 20:26:18 LOG4 got_cormsg: From DATATAKING: set dec 15.3992462594 2009-May-17 20:26:18 LOG4 got_cormsg: From DATATAKING: vw% 313.25 2009-May-17 20:26:18 LOG4 got_cormsg: From DATATAKING: vw% 15.3992462594 2009-May-17 20:26:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:26:18 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-17 20:26:18 LOG4 got_cormsg: From DATATAKING: pnt tr 313.25 15.3992462594 -CF 2009-May-17 20:26:18 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-17 20:26:18 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-17 20:26:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 20:26:21 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-May-17 20:26:21 INFO3 alfa_motor: ALFA rotator in-position +58.90 degrees 2009-May-17 20:26:21 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-May-17 20:26:21 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2009-May-17 20:26:21 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-17 20:26:21 STOP finish_task: Finishing task 'rotate ALFA to +58.9 degrees' 2009-May-17 20:26:21 LOG5 finish_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2009-May-17 20:26:21 INFO2 finish_task: DONE finished configuration: rotating ALFA to +58.9 degrees 2009-May-17 20:26:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:26:21 STOP end_task: Finishing task 'rotate ALFA to +58.9 degrees' with status 'OK' 2009-May-17 20:26:21 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2009-May-17 20:26:21 START begin_task: Starting task 'waiting on telescope' 2009-May-17 20:26:21 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2009-May-17 20:26:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-17 20:26:21 LOG3 waittrk: Start waittrk 5 2009-May-17 20:26:21 START begin_task: Starting task 'waiting on telescope movement' 2009-May-17 20:26:21 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2009-May-17 20:26:26 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-17 20:26:26 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2009-May-17 20:26:26 START begin_task: Starting task 'waiting on telescope on source' 2009-May-17 20:26:26 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-May-17 20:26:44 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-17 20:26:44 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-May-17 20:26:44 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-17 20:26:44 INFO2 waittrk: Now tracking AGESVC1B_p3_058 2009-May-17 20:26:44 LOG4 waittrk: Current telescope position: Az = 312.87 ZA = 15.39 2009-May-17 20:26:44 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-17 20:26:44 LOG5 finish_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2009-May-17 20:26:44 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-17 20:26:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:26:44 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-17 20:26:44 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2009-May-17 20:26:44 START begin_task: Starting task 'selecting calibration type' 2009-May-17 20:26:44 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-May-17 20:26:44 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-17 20:26:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-17 20:26:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-17 20:26:44 START begin_task: Starting task 'waiting on setcal' 2009-May-17 20:26:44 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-May-17 20:26:44 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-17 20:26:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-17 20:26:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:26:45 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-17 20:26:45 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-17 20:26:45 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-May-17 20:26:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-17 20:26:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 20:26:46 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-17 20:26:46 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 20:26:46 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2009-May-17 20:26:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:26:46 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 20:26:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 20:26:46 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2009-May-17 20:26:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 20:26:46 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-17 20:26:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 20:26:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-17 20:26:46 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 20:26:46 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-May-17 20:26:46 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 20:26:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 20:26:46 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-May-17 20:26:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 20:26:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-17 20:26:46 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-17 20:26:46 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-May-17 20:26:46 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-May-17 20:26:46 INFO2 astwait: Waiting for 26 seconds from 00:26:46 to 00:27:12 UTC ... 2009-May-17 20:26:46 LOG4 send_obs_status: To obs_status: <1> TASKTIME 26 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-17 20:26:46 START begin_task: Starting task 'waiting on waiting for AST time' 2009-May-17 20:26:46 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-May-17 20:27:12 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-May-17 20:27:12 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-May-17 20:27:12 INFO3 astwait: Finished waiting 2009-May-17 20:27:12 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-17 20:27:12 LOG5 dopset_later: Calling 'dopset_later 60.662481877386185' 2009-May-17 20:27:12 INFO3 dopset_later: Setting Doppler correction for 20:28:12 (60.7 seconds from now) 2009-May-17 20:27:12 LOG5 antvel: Calling 'antvel 313.250000 15.399246 F 60.662481877386185' 2009-May-17 20:27:12 LOG2 antvel: Transforming current Az = 313.25 ZA = 15.40 to apparent RA = 12:29:30.1 Dec = +07:31:15.5 2009-May-17 20:27:12 LOG2 antvel: Parameters to Doppler: Heliocentric 88092 2009 137 0.0 2009-May-17 20:27:12 INFO5 antvel: Computed antenna velocity: +23.00559 km/s 2009-May-17 20:27:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=23.0055936065 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-May-17 20:27:12 INFO4 dopset_gen: New sky frequencies: 1381.137442 1381.137442 1381.137442 1381.137442 1381.137442 1381.137442 1381.137442 1381.137442 1381.137442 2009-May-17 20:27:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.137442 sky0=1381.137442 sky1=1381.137442 sky2=1381.137442 sky3=1381.137442 sky4=1381.137442 sky5=1381.137442 sky6=1381.137442 sky7=1381.137442 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 20:27:12 LOG2 dopset_gen: Result from 'sky2syn': 1631.137442 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 20:27:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631137442.0} 2009-May-17 20:27:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 20:27:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-May-17 20:27:12 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-May-17 20:27:12 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:28:03.8 Dec = +07:34:22.0 2009-May-17 20:27:12 LOG3 track_source: Calling 'track_source AGESVC1B_p3_058 122803.8 073422.0 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-17 20:27:12 START begin_task: Starting task 'sending tracking commands' 2009-May-17 20:27:12 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-May-17 20:27:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_058} INFO {Slewing to source 'AGESVC1B_p3_058' ...} 2009-May-17 20:27:12 INFO1 track_source: Starting to track AGESVC1B_p3_058 2009-May-17 20:27:12 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_058" 2009-May-17 20:27:12 LOG3 vw_send: To DATATAKING: set ra 122803.8 2009-May-17 20:27:12 LOG3 vw_send: To DATATAKING: set dec 073422.0 2009-May-17 20:27:12 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-17 20:27:12 LOG3 vw_send: To DATATAKING: pnt tr 122803.8 073422.0 -CJ 2009-May-17 20:27:12 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-17 20:27:12 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-17 20:27:12 LOG5 finish_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-May-17 20:27:12 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-17 20:27:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:27:12 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-17 20:27:12 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-May-17 20:27:12 START begin_task: Starting task 'waiting on telescope' 2009-May-17 20:27:12 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2009-May-17 20:27:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-17 20:27:12 LOG3 waittrk: Start waittrk 5 2009-May-17 20:27:12 START begin_task: Starting task 'waiting on telescope movement' 2009-May-17 20:27:12 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2009-May-17 20:27:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631137442.0} 2009-May-17 20:27:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 20:27:12 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-17 20:27:12 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_058" 2009-May-17 20:27:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:27:12 LOG4 got_cormsg: From DATATAKING: set ra 122803.8 2009-May-17 20:27:12 LOG4 got_cormsg: From DATATAKING: set dec 073422.0 2009-May-17 20:27:12 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-17 20:27:12 LOG4 got_cormsg: From DATATAKING: pnt tr 122803.8 073422.0 -CJ 2009-May-17 20:27:12 LOG4 got_cormsg: From DATATAKING: 122803.8 2009-May-17 20:27:12 LOG4 got_cormsg: From DATATAKING: vw% 073422.0 2009-May-17 20:27:12 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2009-May-17 20:27:12 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-17 20:27:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:27:17 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-17 20:27:17 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2009-May-17 20:27:17 START begin_task: Starting task 'waiting on telescope on source' 2009-May-17 20:27:17 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-May-17 20:27:19 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-17 20:27:19 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-May-17 20:27:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-17 20:27:19 INFO2 waittrk: Now tracking AGESVC1B_p3_058 2009-May-17 20:27:19 LOG4 waittrk: Current telescope position: Az = 312.93 ZA = 15.38 2009-May-17 20:27:19 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-17 20:27:19 LOG5 finish_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2009-May-17 20:27:19 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-17 20:27:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:27:19 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-17 20:27:19 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2009-May-17 20:27:19 START begin_task: Starting task 'adjusting WAPP power' 2009-May-17 20:27:19 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-May-17 20:27:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-May-17 20:27:19 INFO2 adjust_power: Starting to adjust WAPP power 2009-May-17 20:27:19 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-May-17 20:27:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-May-17 20:27:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-17 20:27:19 START begin_task: Starting task 'waiting on adjpwrif2' 2009-May-17 20:27:19 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-May-17 20:27:20 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-May-17 20:27:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-17 20:27:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:27:22 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-17 20:27:22 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-May-17 20:27:22 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-May-17 20:27:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-May-17 20:27:22 START begin_task: Starting task 'adjusting WAPP power' 2009-May-17 20:27:22 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2009-May-17 20:27:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-May-17 20:27:22 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 20:27:22 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 20:27:22 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 20:27:22 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 20:27:22 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-May-17 20:27:22 LOG5 begin_task: Level: (5) ID = <10068> Status = 0 0 0 0 ok 2009-May-17 20:27:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-May-17 20:27:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:27:23 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 7 7 dB 2009-May-17 20:27:23 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 5 dB 2009-May-17 20:27:23 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 7 4 dB --- beam 3: 4 3 dB 2009-May-17 20:27:23 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-May-17 20:27:23 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-May-17 20:27:23 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-May-17 20:27:23 LOG5 end_task: Level: (5) ID = <10068> Status = 0 0 0 0 ok 2009-May-17 20:27:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.102 1.005 ALFA beam 1: 0.973 0.972 2009-May-17 20:27:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.915 1.096 ALFA beam 3: 1.035 1.015 2009-May-17 20:27:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.022 0.971 ALFA beam 5: 0.963 0.890 2009-May-17 20:27:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.022 0.110 ALFA beam 7: 1.113 0.135 2009-May-17 20:27:23 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-17 20:27:23 LOG5 finish_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2009-May-17 20:27:23 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-May-17 20:27:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:27:23 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-17 20:27:23 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2009-May-17 20:27:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-17 20:27:23 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-17 20:27:23 LOG5 finish_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-May-17 20:27:23 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-May-17 20:27:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:27:23 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-17 20:27:23 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-May-17 20:27:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-May-17 20:27:23 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-May-17 20:27:23 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-May-17 20:27:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-May-17 20:27:23 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-May-17 20:27:23 START begin_task: Starting task 'WAPP calibration' 2009-May-17 20:27:23 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-May-17 20:27:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-May-17 20:27:23 START begin_task: Starting task 'selecting calibration type' 2009-May-17 20:27:23 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-May-17 20:27:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-17 20:27:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-17 20:27:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-17 20:27:23 START begin_task: Starting task 'waiting on setcal' 2009-May-17 20:27:23 LOG5 begin_task: Level: (5) ID = <10071> Status = 0 0 0 0 ok 2009-May-17 20:27:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-May-17 20:27:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-17 20:27:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-17 20:27:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:27:24 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-17 20:27:24 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-17 20:27:24 LOG5 end_task: Level: (5) ID = <10071> Status = 0 0 0 0 ok 2009-May-17 20:27:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-17 20:27:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 20:27:24 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-17 20:27:24 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 20:27:24 LOG5 begin_task: Level: (5) ID = <10072> Status = 0 0 0 0 ok 2009-May-17 20:27:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:27:24 NOTE WAPPDATA-new_file: New FITS file: wapp.20090517.a2048.0001.fits 2009-May-17 20:27:24 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090517.a2048.0001.fits} 2009-May-17 20:27:25 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 20:27:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 20:27:25 LOG5 end_task: Level: (5) ID = <10072> Status = 0 0 0 0 ok 2009-May-17 20:27:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 20:27:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-17 20:27:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 20:27:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-17 20:27:25 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 20:27:25 LOG5 begin_task: Level: (5) ID = <10073> Status = 0 0 0 0 ok 2009-May-17 20:27:25 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 20:27:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 20:27:25 LOG5 end_task: Level: (5) ID = <10073> Status = 0 0 0 0 ok 2009-May-17 20:27:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 20:27:25 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-17 20:27:25 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-17 20:27:25 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-May-17 20:27:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-May-17 20:27:25 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-May-17 20:27:25 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-May-17 20:27:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-17 20:27:25 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-May-17 20:27:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:27:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 1.005 0.973 0.972 2009-May-17 20:27:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 1.096 1.035 1.015 2009-May-17 20:27:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.022 0.971 0.963 0.890 2009-May-17 20:27:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.110 1.113 0.135 2009-May-17 20:27:25 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-17 20:27:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-May-17 20:27:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-17 20:27:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-17 20:27:25 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-May-17 20:27:25 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-May-17 20:27:25 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-May-17 20:27:25 START begin_task: Starting task 'WAPP spectral observation' 2009-May-17 20:27:25 LOG5 begin_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2009-May-17 20:27:25 LOG5 log_alfabeam: Parameters: 12.467722222222223 7.5727777777777776 11.728461 2009.377419195376 58.899925 2009-May-17 20:27:25 LOG4 log_alfabeam: ALFABEAM 0 12.467722222222216 7.572777777777776 2009-May-17 20:27:25 LOG4 log_alfabeam: ALFABEAM 1 12.465468709347501 7.670439958677817 2009-May-17 20:27:25 LOG4 log_alfabeam: ALFABEAM 2 12.461176521361505 7.605737086551119 2009-May-17 20:27:25 LOG4 log_alfabeam: ALFABEAM 3 12.463392241082074 7.507883031958600 2009-May-17 20:27:25 LOG4 log_alfabeam: ALFABEAM 4 12.469943622377210 7.474837434548885 2009-May-17 20:27:25 LOG4 log_alfabeam: ALFABEAM 5 12.474286748850826 7.540279164021841 2009-May-17 20:27:25 LOG4 log_alfabeam: ALFABEAM 6 12.472027539800587 7.638027209796086 2009-May-17 20:27:25 INFO2 take_data: Starting WAPP scan: 913700203 2009-May-17 20:27:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-May-17 20:27:25 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-17 20:27:25 LOG5 begin_task: Level: (5) ID = <10076> Status = 0 0 0 0 ok 2009-May-17 20:27:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 20:27:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1646.00 2009-May-17 20:27:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.137442 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 20:27:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.137442 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 20:27:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.137442 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 20:27:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.137442 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 20:27:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.137442 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 20:27:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.137442 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 20:27:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.137442 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 20:27:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.137442 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 20:27:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.137442 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 20:27:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 20:27:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-17 20:27:31 LOG5 end_task: Level: (5) ID = <10076> Status = 0 0 0 0 ok 2009-May-17 20:27:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-17 20:27:31 LOG5 end_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2009-May-17 20:27:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-May-17 20:27:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-17 20:27:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-17 20:27:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-17 20:27:31 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-May-17 20:27:31 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-17 20:27:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-17 20:27:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-17 20:27:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-17 20:27:31 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-May-17 20:27:31 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-May-17 20:27:31 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-May-17 20:27:31 START begin_task: Starting task 'WAPP spectral observation' 2009-May-17 20:27:31 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2009-May-17 20:27:31 LOG5 log_alfabeam: Parameters: 12.467722222222223 7.5727777777777776 11.730411 2009.3774194171926 58.899925 2009-May-17 20:27:31 LOG4 log_alfabeam: ALFABEAM 0 12.467722222222221 7.572777777777772 2009-May-17 20:27:31 LOG4 log_alfabeam: ALFABEAM 1 12.465476946793792 7.670481806444126 2009-May-17 20:27:31 LOG4 log_alfabeam: ALFABEAM 2 12.461179325598421 7.605859723743628 2009-May-17 20:27:31 LOG4 log_alfabeam: ALFABEAM 3 12.463386741587346 7.507964257865885 2009-May-17 20:27:31 LOG4 log_alfabeam: ALFABEAM 4 12.469935322058831 7.474795807814985 2009-May-17 20:27:31 LOG4 log_alfabeam: ALFABEAM 5 12.474284009494806 7.540156839938843 2009-May-17 20:27:31 LOG4 log_alfabeam: ALFABEAM 6 12.472033034373693 7.637946947579891 2009-May-17 20:27:31 INFO2 take_data: Starting WAPP scan: 913700204 2009-May-17 20:27:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-May-17 20:27:32 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-17 20:27:32 LOG5 begin_task: Level: (5) ID = <10079> Status = 0 0 0 0 ok 2009-May-17 20:27:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 20:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.574 (still bad) 2009-May-17 20:27:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1653.00 2009-May-17 20:27:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.137442 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 20:27:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.137442 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 20:27:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.137442 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 20:27:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.137442 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 20:27:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.137442 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 20:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.574 (still bad) 2009-May-17 20:27:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.137442 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 20:27:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.137442 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 20:27:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.137442 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 20:27:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.137442 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 20:27:38 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-May-17 20:27:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 20:27:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-17 20:27:38 LOG5 end_task: Level: (5) ID = <10079> Status = 0 0 0 0 ok 2009-May-17 20:27:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-17 20:27:38 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2009-May-17 20:27:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-17 20:27:38 STOP finish_task: Finishing task 'WAPP calibration' 2009-May-17 20:27:38 LOG5 finish_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-May-17 20:27:38 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-May-17 20:27:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:27:38 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-May-17 20:27:38 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-May-17 20:27:39 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-May-17 20:27:39 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 313.25 and ZA = 15.40 2009-May-17 20:27:39 LOG3 track_source: Calling 'track_source AGESVC1B_p3_058 313.25 15.3992462594 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-17 20:27:39 START begin_task: Starting task 'sending tracking commands' 2009-May-17 20:27:39 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-May-17 20:27:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_058} INFO {Slewing to source 'AGESVC1B_p3_058' ...} 2009-May-17 20:27:39 INFO1 track_source: Starting to track AGESVC1B_p3_058 2009-May-17 20:27:39 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_058" 2009-May-17 20:27:39 LOG3 vw_send: To DATATAKING: set ra 313.25 2009-May-17 20:27:39 LOG3 vw_send: To DATATAKING: set dec 15.3992462594 2009-May-17 20:27:39 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-17 20:27:39 LOG3 vw_send: To DATATAKING: pnt tr 313.25 15.3992462594 -CF 2009-May-17 20:27:39 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-17 20:27:39 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-17 20:27:39 LOG5 finish_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-May-17 20:27:39 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-17 20:27:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:27:39 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-17 20:27:39 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-May-17 20:27:39 LOG1 fixed_driftmap: Parameters: HA = -00:45:00.0 Start = 11:44:30.3 LST = 11:43:56.5 diff = 33.8 secs 2009-May-17 20:27:39 INFO2 fixed_driftmap: Waiting 31.8 seconds for RA 12:29:30 2009-May-17 20:27:39 INFO2 lstwait: Waiting for 31.7 secs from LST 11:43:56 to LST 11:44:28 ... 2009-May-17 20:27:39 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.666269895630261 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-17 20:27:39 START begin_task: Starting task 'waiting on wait on LST' 2009-May-17 20:27:39 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2009-May-17 20:27:39 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_058" 2009-May-17 20:27:39 LOG4 got_cormsg: From DATATAKING: set ra 313.25 2009-May-17 20:27:39 LOG4 got_cormsg: From DATATAKING: set dec 15.3992462594 2009-May-17 20:27:39 LOG4 got_cormsg: From DATATAKING: vw% 313.25 2009-May-17 20:27:39 LOG4 got_cormsg: From DATATAKING: vw% 15.3992462594 2009-May-17 20:27:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:27:39 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-17 20:27:39 LOG4 got_cormsg: From DATATAKING: pnt tr 313.25 15.3992462594 -CF 2009-May-17 20:27:39 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-17 20:27:39 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-17 20:27:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:28:11 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-May-17 20:28:11 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2009-May-17 20:28:11 LOG4 lstwait: Finished waiting 0.33 seconds late 2009-May-17 20:28:11 INFO3 lstwait: Finished waiting 2009-May-17 20:28:11 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-17 20:28:11 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-May-17 20:28:11 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-May-17 20:28:11 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-May-17 20:28:11 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-May-17 20:28:11 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-May-17 20:28:11 START begin_task: Starting task 'WAPP spectral observation' 2009-May-17 20:28:11 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-May-17 20:28:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-May-17 20:28:11 INFO2 take_data: Starting WAPP scan: 913700205 2009-May-17 20:28:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-May-17 20:28:11 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-17 20:28:11 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-May-17 20:28:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 20:28:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1692.00 2009-May-17 20:28:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.137442 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 20:28:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.137442 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 20:28:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.137442 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 20:28:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.137442 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 20:28:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.137442 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 20:28:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.137442 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 20:28:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.137442 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 20:28:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.137442 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 20:28:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.137442 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 20:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:28:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:28:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 1.009 0.976 0.971 2009-May-17 20:28:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 1.094 0.992 0.973 2009-May-17 20:28:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 0.961 0.962 0.893 2009-May-17 20:28:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.110 1.126 0.135 2009-May-17 20:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-17 20:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-May-17 20:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-May-17 20:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:29:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:29:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.107 1.012 0.978 0.974 2009-May-17 20:29:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 1.100 0.995 0.976 2009-May-17 20:29:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 0.964 0.963 0.896 2009-May-17 20:29:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.110 1.132 0.136 2009-May-17 20:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-May-17 20:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-May-17 20:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:30:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:30:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.009 0.978 0.975 2009-May-17 20:30:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 1.112 0.994 0.977 2009-May-17 20:30:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.019 0.967 0.966 0.893 2009-May-17 20:30:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 0.110 1.129 0.136 2009-May-17 20:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-May-17 20:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.148 (still bad) 2009-May-17 20:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.152 (still bad) 2009-May-17 20:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.152 (still bad) 2009-May-17 20:31:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:31:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.149 1.049 0.977 0.973 2009-May-17 20:31:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 1.097 0.994 0.977 2009-May-17 20:31:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.020 0.963 0.962 0.893 2009-May-17 20:31:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 0.110 1.129 0.136 2009-May-17 20:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.143 (still bad) 2009-May-17 20:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-May-17 20:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-May-17 20:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-May-17 20:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-17 20:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:32:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:32:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.114 1.016 0.983 0.980 2009-May-17 20:32:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 1.106 0.999 0.983 2009-May-17 20:32:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.023 0.970 0.968 0.898 2009-May-17 20:32:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.034 0.110 1.137 0.136 2009-May-17 20:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-May-17 20:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-May-17 20:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-May-17 20:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-May-17 20:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-May-17 20:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:33:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:33:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.111 1.011 0.984 0.979 2009-May-17 20:33:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 1.103 0.995 0.980 2009-May-17 20:33:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.019 0.965 0.966 0.898 2009-May-17 20:33:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.110 1.134 0.136 2009-May-17 20:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-17 20:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-May-17 20:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-May-17 20:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-17 20:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-May-17 20:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-17 20:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-May-17 20:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-May-17 20:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:34:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:34:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.112 1.013 0.998 0.991 2009-May-17 20:34:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 1.104 1.000 0.985 2009-May-17 20:34:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.025 0.972 0.970 0.900 2009-May-17 20:34:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.110 1.136 0.135 2009-May-17 20:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-May-17 20:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-May-17 20:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:35:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:35:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.111 1.013 0.978 0.973 2009-May-17 20:35:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 1.099 0.999 0.982 2009-May-17 20:35:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.018 0.964 0.963 0.896 2009-May-17 20:35:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.110 1.132 0.136 2009-May-17 20:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:36:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:36:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.108 1.008 0.979 0.974 2009-May-17 20:36:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 1.099 0.996 0.979 2009-May-17 20:36:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.021 0.969 0.967 0.895 2009-May-17 20:36:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.110 1.129 0.135 2009-May-17 20:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-May-17 20:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-May-17 20:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-May-17 20:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-17 20:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-May-17 20:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-May-17 20:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-May-17 20:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:37:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:37:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 1.006 0.978 0.973 2009-May-17 20:37:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 1.097 0.998 0.980 2009-May-17 20:37:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.016 0.963 0.966 0.895 2009-May-17 20:37:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.029 0.110 1.132 0.136 2009-May-17 20:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-17 20:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-May-17 20:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-17 20:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-May-17 20:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-May-17 20:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-May-17 20:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:38:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:38:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.110 1.012 0.980 0.975 2009-May-17 20:38:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 1.100 1.067 1.054 2009-May-17 20:38:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 0.965 0.961 0.894 2009-May-17 20:38:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.110 1.129 0.136 2009-May-17 20:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.145 (still bad) 2009-May-17 20:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-May-17 20:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-17 20:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:39:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:39:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.098 1.001 0.977 0.972 2009-May-17 20:39:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 1.099 0.993 0.976 2009-May-17 20:39:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.011 0.959 0.961 0.894 2009-May-17 20:39:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.110 1.130 0.136 2009-May-17 20:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 20:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-May-17 20:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-17 20:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:40:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:40:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.098 1.000 0.976 0.970 2009-May-17 20:40:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 1.089 0.992 0.975 2009-May-17 20:40:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.009 0.958 0.964 0.894 2009-May-17 20:40:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.110 1.130 0.135 2009-May-17 20:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-May-17 20:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-May-17 20:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-May-17 20:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-May-17 20:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-May-17 20:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-17 20:41:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:41:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 0.999 0.974 0.966 2009-May-17 20:41:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 1.090 1.009 0.991 2009-May-17 20:41:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.008 0.955 0.961 0.893 2009-May-17 20:41:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.110 1.132 0.135 2009-May-17 20:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.152 (still bad) 2009-May-17 20:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-17 20:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:42:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:42:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 1.001 0.975 0.968 2009-May-17 20:42:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 1.091 0.995 0.975 2009-May-17 20:42:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.009 0.955 0.961 0.892 2009-May-17 20:42:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.110 1.137 0.135 2009-May-17 20:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-May-17 20:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-May-17 20:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-May-17 20:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-May-17 20:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-May-17 20:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-May-17 20:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-May-17 20:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-17 20:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-May-17 20:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-May-17 20:43:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:43:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 0.998 0.973 0.966 2009-May-17 20:43:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 1.090 0.996 0.976 2009-May-17 20:43:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.006 0.954 0.963 0.897 2009-May-17 20:43:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.110 1.132 0.135 2009-May-17 20:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-May-17 20:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-17 20:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-17 20:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-17 20:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2009-May-17 20:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-17 20:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-May-17 20:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-17 20:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.143 (still bad) 2009-May-17 20:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-17 20:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-May-17 20:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:44:41 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 20:44:41.302 (seconds: 74681.302)!} 2009-May-17 20:44:41 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 20:44:41.302 (seconds: 74681.302)! 2009-May-17 20:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:44:42 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 74680.0 to 74681.0! 2009-May-17 20:44:43 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (74680.0 - 74682.0)! 2009-May-17 20:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2009-May-17 20:44:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:44:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.094 1.001 0.976 0.969 2009-May-17 20:44:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 1.091 0.994 0.975 2009-May-17 20:44:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.007 0.957 0.959 0.894 2009-May-17 20:44:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.110 1.132 0.135 2009-May-17 20:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-17 20:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-May-17 20:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-17 20:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-17 20:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-May-17 20:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:45:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:45:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.098 1.000 0.972 0.967 2009-May-17 20:45:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 1.101 1.000 0.984 2009-May-17 20:45:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.009 0.958 0.962 0.898 2009-May-17 20:45:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.110 1.129 0.135 2009-May-17 20:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:46:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:46:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 1.005 0.977 0.970 2009-May-17 20:46:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.921 1.099 1.010 0.992 2009-May-17 20:46:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.012 0.959 0.963 0.896 2009-May-17 20:46:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 0.110 1.135 0.135 2009-May-17 20:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-May-17 20:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-May-17 20:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-May-17 20:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-May-17 20:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 20:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-May-17 20:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-May-17 20:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:47:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:47:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 1.005 0.978 0.972 2009-May-17 20:47:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.921 1.098 0.995 0.979 2009-May-17 20:47:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.012 0.961 0.962 0.895 2009-May-17 20:47:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 0.110 1.133 0.135 2009-May-17 20:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-May-17 20:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:48:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 20:48:12 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-17 20:48:12 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-May-17 20:48:12 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-17 20:48:12 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-May-17 20:48:12 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-May-17 20:48:12 LOG5 finish_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2009-May-17 20:48:12 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-May-17 20:48:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-17 20:48:12 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-May-17 20:48:12 LOG5 end_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2009-May-17 20:48:12 COMMAND run_command_line: EXECUTING command 19: 'ENDIF' 2009-May-17 20:48:12 COMMAND run_command_line: EXECUTING command 22: 'IF LSTSLEW(AGESVC1B_p3_060) < 120729 THEN' 2009-May-17 20:48:13 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1B_p3_060) < 120729 2009-May-17 20:48:13 INFO5 is_if_valid: Condition parsed as: 12.096076999999999 < 12.124722222222223 2009-May-17 20:48:13 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=333.11 alfaangle=41.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_060 ra=122900.00 dec=73130.00' 2009-May-17 20:48:13 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-May-17 20:48:13 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-17 20:48:13 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 333.11 41.5 hcorcal 5 tracking no first 1 AGESVC1B_p3_060 122900.00 73130.00 J 8500.0 Heliocentric velocity(optical)' 2009-May-17 20:48:13 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-May-17 20:48:13 LOG5 begin_task: Level: (2) ID = <10084> Status = 0 0 0 0 ok 2009-May-17 20:48:13 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1B_p3_058' 2009-May-17 20:48:13 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-May-17 20:48:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p3_060} 2009-May-17 20:48:13 INFO3 fixed_driftmap: Sending telescope to Az = 333.11 and ZA = 12.13 2009-May-17 20:48:13 LOG3 track_source: Calling 'track_source AGESVC1B_p3_060 333.11 12.1269881765 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-17 20:48:13 START begin_task: Starting task 'sending tracking commands' 2009-May-17 20:48:13 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2009-May-17 20:48:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_060} INFO {Slewing to source 'AGESVC1B_p3_060' ...} 2009-May-17 20:48:13 INFO1 track_source: Starting to track AGESVC1B_p3_060 2009-May-17 20:48:13 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_060" 2009-May-17 20:48:13 LOG3 vw_send: To DATATAKING: set ra 333.11 2009-May-17 20:48:13 LOG3 vw_send: To DATATAKING: set dec 12.1269881765 2009-May-17 20:48:13 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-17 20:48:13 LOG3 vw_send: To DATATAKING: pnt tr 333.11 12.1269881765 -CF 2009-May-17 20:48:13 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-17 20:48:13 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-17 20:48:13 LOG5 finish_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2009-May-17 20:48:13 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-17 20:48:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:48:13 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-17 20:48:13 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2009-May-17 20:48:13 START begin_task: Starting task 'rotate ALFA to +41.5 degrees' 2009-May-17 20:48:13 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-May-17 20:48:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +41.5 degrees ...} 2009-May-17 20:48:14 INFO2 rotate_alfa: ALFA commanded to +41.5 degrees 2009-May-17 20:48:14 LOG3 sock_errsend: To ALFAMOTOR: POSITION 41.5 REPLY 2009-May-17 20:48:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-May-17 20:48:14 START begin_task: Starting task 'waiting on ALFA rotation' 2009-May-17 20:48:14 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-May-17 20:48:14 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_060" 2009-May-17 20:48:14 LOG4 got_cormsg: From DATATAKING: set ra 333.11 2009-May-17 20:48:14 LOG4 got_cormsg: From DATATAKING: set dec 12.1269881765 2009-May-17 20:48:14 LOG4 got_cormsg: From DATATAKING: vw% 333.11 2009-May-17 20:48:14 LOG4 got_cormsg: From DATATAKING: vw% 12.1269881765 2009-May-17 20:48:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:48:14 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-17 20:48:14 LOG4 got_cormsg: From DATATAKING: pnt tr 333.11 12.1269881765 -CF 2009-May-17 20:48:14 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-17 20:48:14 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-17 20:48:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-May-17 20:48:25 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-May-17 20:48:25 INFO3 alfa_motor: ALFA rotator in-position +41.50 degrees 2009-May-17 20:48:25 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-May-17 20:48:25 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-May-17 20:48:25 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-17 20:48:25 STOP finish_task: Finishing task 'rotate ALFA to +41.5 degrees' 2009-May-17 20:48:25 LOG5 finish_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-May-17 20:48:25 INFO2 finish_task: DONE finished configuration: rotating ALFA to +41.5 degrees 2009-May-17 20:48:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:48:25 STOP end_task: Finishing task 'rotate ALFA to +41.5 degrees' with status 'OK' 2009-May-17 20:48:25 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-May-17 20:48:25 START begin_task: Starting task 'waiting on telescope' 2009-May-17 20:48:25 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-May-17 20:48:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-17 20:48:25 LOG3 waittrk: Start waittrk 5 2009-May-17 20:48:25 START begin_task: Starting task 'waiting on telescope movement' 2009-May-17 20:48:25 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-May-17 20:48:30 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-17 20:48:30 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-May-17 20:48:30 START begin_task: Starting task 'waiting on telescope on source' 2009-May-17 20:48:30 LOG5 begin_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2009-May-17 20:49:43 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-17 20:49:43 LOG5 end_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2009-May-17 20:49:43 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-17 20:49:43 INFO2 waittrk: Now tracking AGESVC1B_p3_060 2009-May-17 20:49:43 LOG4 waittrk: Current telescope position: Az = 332.73 ZA = 12.11 2009-May-17 20:49:43 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-17 20:49:43 LOG5 finish_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-May-17 20:49:43 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-17 20:49:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:49:43 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-17 20:49:43 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-May-17 20:49:43 START begin_task: Starting task 'selecting calibration type' 2009-May-17 20:49:43 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2009-May-17 20:49:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-17 20:49:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-17 20:49:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-17 20:49:43 START begin_task: Starting task 'waiting on setcal' 2009-May-17 20:49:43 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2009-May-17 20:49:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-17 20:49:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-17 20:49:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:49:44 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-17 20:49:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-17 20:49:44 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2009-May-17 20:49:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-17 20:49:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 20:49:44 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-17 20:49:44 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 20:49:44 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2009-May-17 20:49:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:49:44 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 20:49:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 20:49:44 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2009-May-17 20:49:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 20:49:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-17 20:49:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 20:49:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-17 20:49:44 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 20:49:44 LOG5 begin_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2009-May-17 20:49:44 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 20:49:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 20:49:44 LOG5 end_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2009-May-17 20:49:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 20:49:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-17 20:49:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-17 20:49:44 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2009-May-17 20:49:44 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-May-17 20:49:44 INFO2 astwait: Waiting for 24 seconds from 00:49:44 to 00:50:08 UTC ... 2009-May-17 20:49:44 LOG4 send_obs_status: To obs_status: <1> TASKTIME 24 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-17 20:49:44 START begin_task: Starting task 'waiting on waiting for AST time' 2009-May-17 20:49:44 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2009-May-17 20:50:08 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-May-17 20:50:08 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2009-May-17 20:50:08 INFO3 astwait: Finished waiting 2009-May-17 20:50:08 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-17 20:50:08 LOG5 dopset_later: Calling 'dopset_later 61.171128625918641' 2009-May-17 20:50:08 INFO3 dopset_later: Setting Doppler correction for 20:51:08 (61.2 seconds from now) 2009-May-17 20:50:08 LOG5 antvel: Calling 'antvel 333.110000 12.126988 F 61.171128625918641' 2009-May-17 20:50:08 LOG2 antvel: Transforming current Az = 333.11 ZA = 12.13 to apparent RA = 12:29:30.1 Dec = +07:28:15.5 2009-May-17 20:50:08 LOG2 antvel: Parameters to Doppler: Heliocentric 89468 2009 137 0.0 2009-May-17 20:50:08 INFO5 antvel: Computed antenna velocity: +23.05071 km/s 2009-May-17 20:50:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=23.050712819600001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-May-17 20:50:08 INFO4 dopset_gen: New sky frequencies: 1381.137234 1381.137234 1381.137234 1381.137234 1381.137234 1381.137234 1381.137234 1381.137234 1381.137234 2009-May-17 20:50:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.137234 sky0=1381.137234 sky1=1381.137234 sky2=1381.137234 sky3=1381.137234 sky4=1381.137234 sky5=1381.137234 sky6=1381.137234 sky7=1381.137234 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 20:50:08 LOG2 dopset_gen: Result from 'sky2syn': 1631.137234 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 20:50:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631137234.0} 2009-May-17 20:50:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 20:50:08 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-May-17 20:50:08 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-May-17 20:50:08 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:28:03.3 Dec = +07:31:22.0 2009-May-17 20:50:08 LOG3 track_source: Calling 'track_source AGESVC1B_p3_060 122803.3 073122.0 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-17 20:50:08 START begin_task: Starting task 'sending tracking commands' 2009-May-17 20:50:08 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2009-May-17 20:50:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_060} INFO {Slewing to source 'AGESVC1B_p3_060' ...} 2009-May-17 20:50:08 INFO1 track_source: Starting to track AGESVC1B_p3_060 2009-May-17 20:50:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_060" 2009-May-17 20:50:08 LOG3 vw_send: To DATATAKING: set ra 122803.3 2009-May-17 20:50:08 LOG3 vw_send: To DATATAKING: set dec 073122.0 2009-May-17 20:50:08 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-17 20:50:08 LOG3 vw_send: To DATATAKING: pnt tr 122803.3 073122.0 -CJ 2009-May-17 20:50:08 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-17 20:50:08 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-17 20:50:08 LOG5 finish_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2009-May-17 20:50:08 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-17 20:50:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:50:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-17 20:50:08 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2009-May-17 20:50:08 START begin_task: Starting task 'waiting on telescope' 2009-May-17 20:50:08 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-May-17 20:50:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-17 20:50:08 LOG3 waittrk: Start waittrk 5 2009-May-17 20:50:08 START begin_task: Starting task 'waiting on telescope movement' 2009-May-17 20:50:08 LOG5 begin_task: Level: (4) ID = <10098> Status = 0 0 0 0 ok 2009-May-17 20:50:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631137234.0} 2009-May-17 20:50:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 20:50:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_060" 2009-May-17 20:50:08 LOG4 got_cormsg: From DATATAKING: set ra 122803.3 2009-May-17 20:50:08 LOG4 got_cormsg: From DATATAKING: set dec 073122.0 2009-May-17 20:50:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-17 20:50:08 LOG4 got_cormsg: From DATATAKING: vw% 122803.3 2009-May-17 20:50:08 LOG4 got_cormsg: From DATATAKING: vw% 073122.0 2009-May-17 20:50:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:50:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-17 20:50:08 LOG4 got_cormsg: From DATATAKING: pnt tr 122803.3 073122.0 -CJ 2009-May-17 20:50:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-17 20:50:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-17 20:50:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:50:13 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-17 20:50:13 LOG5 end_task: Level: (4) ID = <10098> Status = 0 0 0 0 ok 2009-May-17 20:50:13 START begin_task: Starting task 'waiting on telescope on source' 2009-May-17 20:50:13 LOG5 begin_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2009-May-17 20:50:15 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-17 20:50:15 LOG5 end_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2009-May-17 20:50:15 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-17 20:50:15 INFO2 waittrk: Now tracking AGESVC1B_p3_060 2009-May-17 20:50:15 LOG4 waittrk: Current telescope position: Az = 332.81 ZA = 12.10 2009-May-17 20:50:15 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-17 20:50:15 LOG5 finish_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-May-17 20:50:15 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-17 20:50:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:50:15 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-17 20:50:15 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-May-17 20:50:15 START begin_task: Starting task 'adjusting WAPP power' 2009-May-17 20:50:15 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2009-May-17 20:50:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-May-17 20:50:15 INFO2 adjust_power: Starting to adjust WAPP power 2009-May-17 20:50:15 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-May-17 20:50:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-May-17 20:50:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-17 20:50:15 START begin_task: Starting task 'waiting on adjpwrif2' 2009-May-17 20:50:15 LOG5 begin_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2009-May-17 20:50:15 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-May-17 20:50:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-17 20:50:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:50:18 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-17 20:50:18 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-May-17 20:50:18 LOG5 end_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2009-May-17 20:50:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-May-17 20:50:18 START begin_task: Starting task 'adjusting WAPP power' 2009-May-17 20:50:18 LOG5 begin_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2009-May-17 20:50:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-May-17 20:50:18 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 20:50:18 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 20:50:18 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 20:50:18 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 20:50:18 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-May-17 20:50:18 LOG5 begin_task: Level: (5) ID = <10103> Status = 0 0 0 0 ok 2009-May-17 20:50:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-May-17 20:50:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:50:19 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 7 7 dB 2009-May-17 20:50:19 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 4 dB 2009-May-17 20:50:19 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2009-May-17 20:50:19 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-May-17 20:50:19 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-May-17 20:50:19 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-May-17 20:50:19 LOG5 end_task: Level: (5) ID = <10103> Status = 0 0 0 0 ok 2009-May-17 20:50:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.089 0.992 ALFA beam 1: 0.969 0.966 2009-May-17 20:50:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.104 1.065 ALFA beam 3: 0.954 0.952 2009-May-17 20:50:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.984 0.944 ALFA beam 5: 0.912 1.050 2009-May-17 20:50:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.010 0.110 ALFA beam 7: 1.112 0.135 2009-May-17 20:50:19 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-17 20:50:19 LOG5 finish_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2009-May-17 20:50:19 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-May-17 20:50:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:50:19 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-17 20:50:19 LOG5 end_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2009-May-17 20:50:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-17 20:50:19 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-17 20:50:19 LOG5 finish_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2009-May-17 20:50:19 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-May-17 20:50:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:50:19 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-17 20:50:19 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2009-May-17 20:50:19 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-May-17 20:50:19 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-May-17 20:50:19 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-May-17 20:50:19 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-May-17 20:50:19 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-May-17 20:50:19 START begin_task: Starting task 'WAPP calibration' 2009-May-17 20:50:19 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-May-17 20:50:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-May-17 20:50:19 START begin_task: Starting task 'selecting calibration type' 2009-May-17 20:50:19 LOG5 begin_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2009-May-17 20:50:19 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-17 20:50:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-17 20:50:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-17 20:50:19 START begin_task: Starting task 'waiting on setcal' 2009-May-17 20:50:19 LOG5 begin_task: Level: (5) ID = <10106> Status = 0 0 0 0 ok 2009-May-17 20:50:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-May-17 20:50:19 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-17 20:50:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-17 20:50:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:50:20 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-17 20:50:20 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-17 20:50:20 LOG5 end_task: Level: (5) ID = <10106> Status = 0 0 0 0 ok 2009-May-17 20:50:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-17 20:50:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 20:50:20 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-17 20:50:20 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 20:50:20 LOG5 begin_task: Level: (5) ID = <10107> Status = 0 0 0 0 ok 2009-May-17 20:50:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:50:20 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 20:50:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 20:50:20 LOG5 end_task: Level: (5) ID = <10107> Status = 0 0 0 0 ok 2009-May-17 20:50:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 20:50:20 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-17 20:50:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 20:50:20 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-17 20:50:20 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 20:50:20 LOG5 begin_task: Level: (5) ID = <10108> Status = 0 0 0 0 ok 2009-May-17 20:50:20 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 20:50:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 20:50:20 LOG5 end_task: Level: (5) ID = <10108> Status = 0 0 0 0 ok 2009-May-17 20:50:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 20:50:20 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-17 20:50:20 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-17 20:50:20 LOG5 end_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2009-May-17 20:50:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-May-17 20:50:20 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-May-17 20:50:20 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-May-17 20:50:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-17 20:50:20 LOG5 begin_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2009-May-17 20:50:20 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-17 20:50:20 NOTE WAPPDATA-new_file: New FITS file: wapp.20090517.a2048.0002.fits 2009-May-17 20:50:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-May-17 20:50:20 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090517.a2048.0002.fits} 2009-May-17 20:50:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-17 20:50:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-17 20:50:20 LOG5 end_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2009-May-17 20:50:20 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-May-17 20:50:20 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-May-17 20:50:20 START begin_task: Starting task 'WAPP spectral observation' 2009-May-17 20:50:20 LOG5 begin_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2009-May-17 20:50:20 LOG5 log_alfabeam: Parameters: 12.467583333333334 7.5227777777777778 12.111730 2009.377462798185 41.499908 2009-May-17 20:50:20 LOG4 log_alfabeam: ALFABEAM 0 12.467583333333327 7.522777777777782 2009-May-17 20:50:20 LOG4 log_alfabeam: ALFABEAM 1 12.465655577152479 7.624922098279485 2009-May-17 20:50:20 LOG4 log_alfabeam: ALFABEAM 2 12.461400829007209 7.557464625575346 2009-May-17 20:50:20 LOG4 log_alfabeam: ALFABEAM 3 12.463277753808477 7.455103494579352 2009-May-17 20:50:20 LOG4 log_alfabeam: ALFABEAM 4 12.469490591468249 7.420522651528364 2009-May-17 20:50:20 LOG4 log_alfabeam: ALFABEAM 5 12.473801616806391 7.488754167708155 2009-May-17 20:50:20 LOG4 log_alfabeam: ALFABEAM 6 12.471843593590556 7.590789159297628 2009-May-17 20:50:20 INFO2 take_data: Starting WAPP scan: 913700206 2009-May-17 20:50:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-May-17 20:50:21 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-17 20:50:21 LOG5 begin_task: Level: (5) ID = <10111> Status = 0 0 0 0 ok 2009-May-17 20:50:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 20:50:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:50:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.089 0.992 0.969 0.966 2009-May-17 20:50:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.104 1.065 0.954 0.952 2009-May-17 20:50:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.984 0.944 0.912 1.050 2009-May-17 20:50:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.010 0.110 1.112 0.135 2009-May-17 20:50:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3022.00 2009-May-17 20:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.137234 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 20:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.137234 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 20:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.137234 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 20:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.137234 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 20:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.137234 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 20:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.137234 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 20:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.137234 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 20:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.137234 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 20:50:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.137234 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 20:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.565 (still bad) 2009-May-17 20:50:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 20:50:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-17 20:50:27 LOG5 end_task: Level: (5) ID = <10111> Status = 0 0 0 0 ok 2009-May-17 20:50:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-17 20:50:27 LOG5 end_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2009-May-17 20:50:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-May-17 20:50:27 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-17 20:50:27 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-17 20:50:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-17 20:50:27 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2009-May-17 20:50:27 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-17 20:50:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-17 20:50:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-17 20:50:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-17 20:50:27 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2009-May-17 20:50:27 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-May-17 20:50:27 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-May-17 20:50:27 START begin_task: Starting task 'WAPP spectral observation' 2009-May-17 20:50:27 LOG5 begin_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2009-May-17 20:50:27 LOG5 log_alfabeam: Parameters: 12.467583333333334 7.5227777777777778 12.113680 2009.3774630200016 41.499908 2009-May-17 20:50:27 LOG4 log_alfabeam: ALFABEAM 0 12.467583333333330 7.522777777777779 2009-May-17 20:50:27 LOG4 log_alfabeam: ALFABEAM 1 12.465669761447293 7.624981035149065 2009-May-17 20:50:27 LOG4 log_alfabeam: ALFABEAM 2 12.461405678715414 7.557654811645032 2009-May-17 20:50:27 LOG4 log_alfabeam: ALFABEAM 3 12.463268339493142 7.455236074750877 2009-May-17 20:50:27 LOG4 log_alfabeam: ALFABEAM 4 12.469476377460103 7.420464229507728 2009-May-17 20:50:27 LOG4 log_alfabeam: ALFABEAM 5 12.473796896274152 7.488563604326171 2009-May-17 20:50:27 LOG4 log_alfabeam: ALFABEAM 6 12.471853007026136 7.590658339380728 2009-May-17 20:50:27 INFO2 take_data: Starting WAPP scan: 913700207 2009-May-17 20:50:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-May-17 20:50:28 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-17 20:50:28 LOG5 begin_task: Level: (5) ID = <10114> Status = 0 0 0 0 ok 2009-May-17 20:50:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 20:50:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3029.00 2009-May-17 20:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.565 (still bad) 2009-May-17 20:50:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.137234 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 20:50:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.137234 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 20:50:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.137234 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 20:50:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.137234 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 20:50:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.137234 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 20:50:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.137234 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 20:50:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.137234 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 20:50:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.137234 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 20:50:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.137234 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 20:50:34 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-May-17 20:50:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 20:50:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-17 20:50:34 LOG5 end_task: Level: (5) ID = <10114> Status = 0 0 0 0 ok 2009-May-17 20:50:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-17 20:50:34 LOG5 end_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2009-May-17 20:50:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-17 20:50:34 STOP finish_task: Finishing task 'WAPP calibration' 2009-May-17 20:50:34 LOG5 finish_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-May-17 20:50:34 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-May-17 20:50:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:50:34 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-May-17 20:50:34 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-May-17 20:50:34 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-May-17 20:50:34 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 333.11 and ZA = 12.13 2009-May-17 20:50:34 LOG3 track_source: Calling 'track_source AGESVC1B_p3_060 333.11 12.1269881765 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-17 20:50:34 START begin_task: Starting task 'sending tracking commands' 2009-May-17 20:50:34 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-May-17 20:50:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_060} INFO {Slewing to source 'AGESVC1B_p3_060' ...} 2009-May-17 20:50:34 INFO1 track_source: Starting to track AGESVC1B_p3_060 2009-May-17 20:50:34 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_060" 2009-May-17 20:50:34 LOG3 vw_send: To DATATAKING: set ra 333.11 2009-May-17 20:50:34 LOG3 vw_send: To DATATAKING: set dec 12.1269881765 2009-May-17 20:50:34 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-17 20:50:34 LOG3 vw_send: To DATATAKING: pnt tr 333.11 12.1269881765 -CF 2009-May-17 20:50:34 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-17 20:50:35 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-17 20:50:35 LOG5 finish_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-May-17 20:50:35 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-17 20:50:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 20:50:35 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-17 20:50:35 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-May-17 20:50:35 LOG1 fixed_driftmap: Parameters: HA = -00:21:59.8 Start = 12:07:30.5 LST = 12:06:56.3 diff = 34.3 secs 2009-May-17 20:50:35 INFO2 fixed_driftmap: Waiting 32.3 seconds for RA 12:29:30 2009-May-17 20:50:35 INFO2 lstwait: Waiting for 32.2 secs from LST 12:06:56 to LST 12:07:29 ... 2009-May-17 20:50:35 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.174916644162714 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-17 20:50:35 START begin_task: Starting task 'waiting on wait on LST' 2009-May-17 20:50:35 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-May-17 20:50:35 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_060" 2009-May-17 20:50:35 LOG4 got_cormsg: From DATATAKING: set ra 333.11 2009-May-17 20:50:35 LOG4 got_cormsg: From DATATAKING: set dec 12.1269881765 2009-May-17 20:50:35 LOG4 got_cormsg: From DATATAKING: vw% 333.11 2009-May-17 20:50:35 LOG4 got_cormsg: From DATATAKING: vw% 12.1269881765 2009-May-17 20:50:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:50:35 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-17 20:50:35 LOG4 got_cormsg: From DATATAKING: pnt tr 333.11 12.1269881765 -CF 2009-May-17 20:50:35 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-17 20:50:35 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-17 20:50:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 20:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 20:51:07 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-May-17 20:51:07 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-May-17 20:51:07 LOG4 lstwait: Finished waiting 0.82 seconds late 2009-May-17 20:51:07 INFO3 lstwait: Finished waiting 2009-May-17 20:51:07 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-17 20:51:07 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-May-17 20:51:07 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-May-17 20:51:07 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-May-17 20:51:07 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-May-17 20:51:07 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-May-17 20:51:07 START begin_task: Starting task 'WAPP spectral observation' 2009-May-17 20:51:07 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-May-17 20:51:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-May-17 20:51:07 INFO2 take_data: Starting WAPP scan: 913700208 2009-May-17 20:51:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-May-17 20:51:07 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-17 20:51:07 LOG5 begin_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2009-May-17 20:51:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 20:51:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3068.00 2009-May-17 20:51:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.137234 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 20:51:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.137234 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 20:51:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.137234 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 20:51:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.137234 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 20:51:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.137234 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 20:51:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.137234 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 20:51:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.137234 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 20:51:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.137234 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 20:51:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.137234 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 20:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 20:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 20:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 20:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 20:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 20:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 20:51:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:51:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 0.980 0.972 0.970 2009-May-17 20:51:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.110 1.063 0.947 0.944 2009-May-17 20:51:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.962 0.922 0.916 1.051 2009-May-17 20:51:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.011 0.110 1.116 0.136 2009-May-17 20:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 20:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 20:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 20:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 20:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-May-17 20:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 20:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 20:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 20:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 20:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 20:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:52:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:52:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 0.985 0.973 0.970 2009-May-17 20:52:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.109 1.065 0.947 0.945 2009-May-17 20:52:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.965 0.922 0.917 1.051 2009-May-17 20:52:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.015 0.110 1.118 0.136 2009-May-17 20:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 20:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 20:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-May-17 20:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-May-17 20:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 20:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 20:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 20:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 20:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 20:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 20:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 20:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:53:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:53:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 0.983 0.974 0.971 2009-May-17 20:53:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.112 1.071 0.950 0.945 2009-May-17 20:53:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.982 0.942 0.923 1.057 2009-May-17 20:53:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.014 0.110 1.116 0.135 2009-May-17 20:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 20:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 20:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 20:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 20:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 20:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 20:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 20:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 20:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 20:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2009-May-17 20:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2009-May-17 20:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2009-May-17 20:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.146 (still bad) 2009-May-17 20:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 20:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-May-17 20:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:54:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:54:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.003 0.979 0.976 2009-May-17 20:54:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.116 1.071 0.953 0.950 2009-May-17 20:54:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.971 0.926 0.922 1.056 2009-May-17 20:54:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.110 1.123 0.136 2009-May-17 20:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 20:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 20:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 20:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-May-17 20:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 20:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-May-17 20:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2009-May-17 20:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.146 (still bad) 2009-May-17 20:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.155 (still bad) 2009-May-17 20:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.143 (still bad) 2009-May-17 20:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-May-17 20:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 20:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 20:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-May-17 20:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 20:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 20:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:55:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:55:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 0.980 0.973 0.970 2009-May-17 20:55:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.109 1.064 0.946 0.943 2009-May-17 20:55:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.964 0.921 0.918 1.048 2009-May-17 20:55:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.012 0.110 1.116 0.136 2009-May-17 20:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:56:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:56:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 0.980 0.975 0.973 2009-May-17 20:56:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.107 1.062 0.947 0.943 2009-May-17 20:56:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.965 0.921 0.919 1.049 2009-May-17 20:56:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.012 0.110 1.117 0.135 2009-May-17 20:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 20:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-May-17 20:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 20:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 20:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 20:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 20:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 20:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-May-17 20:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 20:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-May-17 20:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 20:57:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:57:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 0.981 0.974 0.972 2009-May-17 20:57:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.106 1.065 0.947 0.944 2009-May-17 20:57:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.966 0.922 0.919 1.055 2009-May-17 20:57:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.013 0.110 1.117 0.136 2009-May-17 20:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 20:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-May-17 20:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 20:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-May-17 20:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-May-17 20:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 20:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 20:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 20:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 20:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-May-17 20:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 20:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 20:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-May-17 20:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:58:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:58:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 0.980 0.972 0.968 2009-May-17 20:58:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.112 1.063 0.954 0.949 2009-May-17 20:58:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.963 0.921 0.919 1.052 2009-May-17 20:58:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.010 0.110 1.117 0.136 2009-May-17 20:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 20:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-May-17 20:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 20:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 20:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-May-17 20:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 20:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-May-17 20:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 20:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 20:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 20:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 20:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 20:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-May-17 20:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 20:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 20:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:59:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 20:59:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.067 0.977 0.970 0.968 2009-May-17 20:59:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.110 1.062 0.950 0.943 2009-May-17 20:59:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.963 0.922 0.923 1.058 2009-May-17 20:59:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.012 0.110 1.116 0.135 2009-May-17 20:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 20:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-May-17 20:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 20:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 20:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 20:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 20:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 20:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 20:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 20:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 20:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 21:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-May-17 21:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-May-17 21:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 21:00:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:00:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 0.975 0.970 0.966 2009-May-17 21:00:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.111 1.059 0.962 0.955 2009-May-17 21:00:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.959 0.915 0.918 1.052 2009-May-17 21:00:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.009 0.110 1.116 0.135 2009-May-17 21:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-May-17 21:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 21:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-May-17 21:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 21:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.143 (still bad) 2009-May-17 21:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.171 (still bad) 2009-May-17 21:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.189 (still bad) 2009-May-17 21:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.189 (still bad) 2009-May-17 21:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.173 (still bad) 2009-May-17 21:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.157 (still bad) 2009-May-17 21:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-May-17 21:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2009-May-17 21:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.181 (still bad) 2009-May-17 21:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.197 (still bad) 2009-May-17 21:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.202 (still bad) 2009-May-17 21:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.200 (still bad) 2009-May-17 21:01:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:01:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.178 1.078 0.967 0.964 2009-May-17 21:01:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.107 1.056 0.946 0.940 2009-May-17 21:01:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.954 0.912 0.915 1.049 2009-May-17 21:01:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.010 0.110 1.115 0.135 2009-May-17 21:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.148 (still bad) 2009-May-17 21:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-May-17 21:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-May-17 21:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 21:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 21:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-May-17 21:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-May-17 21:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-May-17 21:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-May-17 21:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-May-17 21:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:02:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:02:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 0.973 0.968 0.965 2009-May-17 21:02:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.109 1.056 0.947 0.942 2009-May-17 21:02:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.954 0.909 0.915 1.047 2009-May-17 21:02:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.010 0.110 1.117 0.135 2009-May-17 21:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 21:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:03:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:03:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 0.979 0.972 0.969 2009-May-17 21:03:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.111 1.061 0.948 0.944 2009-May-17 21:03:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.960 0.914 0.920 1.057 2009-May-17 21:03:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.014 0.110 1.120 0.135 2009-May-17 21:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-May-17 21:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-17 21:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-17 21:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:04:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:04:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 0.978 0.973 0.967 2009-May-17 21:04:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.125 1.073 0.948 0.943 2009-May-17 21:04:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.958 0.913 0.916 1.052 2009-May-17 21:04:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.012 0.110 1.120 0.135 2009-May-17 21:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-May-17 21:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-May-17 21:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-May-17 21:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 21:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-17 21:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-May-17 21:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-17 21:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-May-17 21:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:05:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:05:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 0.982 0.976 0.971 2009-May-17 21:05:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.113 1.067 0.952 0.947 2009-May-17 21:05:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.965 0.920 0.920 1.056 2009-May-17 21:05:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.017 0.110 1.124 0.136 2009-May-17 21:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 21:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-May-17 21:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 21:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-May-17 21:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-May-17 21:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-May-17 21:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-May-17 21:06:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:06:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 0.978 0.970 0.969 2009-May-17 21:06:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.107 1.060 0.951 0.945 2009-May-17 21:06:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.962 0.912 0.918 1.051 2009-May-17 21:06:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.011 0.110 1.118 0.135 2009-May-17 21:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 21:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 21:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-May-17 21:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 21:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 21:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-17 21:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 21:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-17 21:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-May-17 21:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-17 21:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 21:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-17 21:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-May-17 21:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:07:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-17 21:07:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 0.979 0.971 0.968 2009-May-17 21:07:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.111 1.062 0.951 0.946 2009-May-17 21:07:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.964 0.920 0.912 1.049 2009-May-17 21:07:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 0.109 1.115 0.135 2009-May-17 21:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-May-17 21:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-17 21:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-May-17 21:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-May-17 21:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-May-17 21:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-May-17 21:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-May-17 21:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2009-May-17 21:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 21:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-May-17 21:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:08:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-17 21:08:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.088 0.995 0.971 0.969 2009-May-17 21:08:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.107 1.065 0.952 0.947 2009-May-17 21:08:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.965 0.921 0.917 1.048 2009-May-17 21:08:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.011 0.109 1.116 0.135 2009-May-17 21:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad) 2009-May-17 21:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-17 21:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-17 21:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-17 21:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-17 21:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-17 21:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-17 21:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-17 21:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-17 21:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 21:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-17 21:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-17 21:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-17 21:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-17 21:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-17 21:09:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-17 21:09:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 0.989 0.973 0.971 2009-May-17 21:09:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.117 1.071 0.949 0.944 2009-May-17 21:09:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.965 0.922 0.920 1.053 2009-May-17 21:09:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.012 0.109 1.118 0.135 2009-May-17 21:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-17 21:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-May-17 21:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.136 (still bad) 2009-May-17 21:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-May-17 21:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2009-May-17 21:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.144 (still bad) 2009-May-17 21:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-May-17 21:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.132 (still bad) 2009-May-17 21:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-May-17 21:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-17 21:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-May-17 21:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 21:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-17 21:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-May-17 21:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-17 21:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-17 21:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-17 21:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-May-17 21:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-17 21:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad) 2009-May-17 21:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad) 2009-May-17 21:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-May-17 21:10:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-May-17 21:10:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 0.984 0.974 0.970 2009-May-17 21:10:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.111 1.065 0.949 0.943 2009-May-17 21:10:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.966 0.920 0.917 1.053 2009-May-17 21:10:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.013 0.109 1.117 0.135 2009-May-17 21:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-May-17 21:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad) 2009-May-17 21:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-May-17 21:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-May-17 21:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:11:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 21:11:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-17 21:11:08 LOG5 end_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2009-May-17 21:11:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-17 21:11:08 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-May-17 21:11:08 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-May-17 21:11:08 LOG5 finish_task: Level: (2) ID = <10084> Status = 0 0 0 0 ok 2009-May-17 21:11:08 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-May-17 21:11:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-17 21:11:08 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-May-17 21:11:08 LOG5 end_task: Level: (2) ID = <10084> Status = 0 0 0 0 ok 2009-May-17 21:11:08 COMMAND run_command_line: EXECUTING command 26: 'ENDIF' 2009-May-17 21:11:08 COMMAND run_command_line: EXECUTING command 29: 'IF LSTSLEW(AGESVC1B_p3_062) < 123029 THEN' 2009-May-17 21:11:09 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1B_p3_062) < 123029 2009-May-17 21:11:09 INFO5 is_if_valid: Condition parsed as: 12.476012666666668 < 12.508055555555556 2009-May-17 21:11:09 COMMAND run_command_line: EXECUTING command 30: 'FIXEDDRIFT az=1.31 alfaangle=18.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_062 ra=122900.00 dec=72830.00' 2009-May-17 21:11:09 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-May-17 21:11:09 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-17 21:11:09 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 1.31 18.0 hcorcal 5 tracking no first 1 AGESVC1B_p3_062 122900.00 72830.00 J 8500.0 Heliocentric velocity(optical)' 2009-May-17 21:11:09 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-May-17 21:11:09 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-May-17 21:11:09 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1B_p3_060' 2009-May-17 21:11:09 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-May-17 21:11:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p3_062} 2009-May-17 21:11:09 INFO3 fixed_driftmap: Sending telescope to Az = 1.31 and ZA = 10.94 2009-May-17 21:11:09 LOG3 track_source: Calling 'track_source AGESVC1B_p3_062 1.31 10.9355679985 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-17 21:11:09 START begin_task: Starting task 'sending tracking commands' 2009-May-17 21:11:09 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-May-17 21:11:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_062} INFO {Slewing to source 'AGESVC1B_p3_062' ...} 2009-May-17 21:11:09 INFO1 track_source: Starting to track AGESVC1B_p3_062 2009-May-17 21:11:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_062" 2009-May-17 21:11:09 LOG3 vw_send: To DATATAKING: set ra 1.31 2009-May-17 21:11:09 LOG3 vw_send: To DATATAKING: set dec 10.9355679985 2009-May-17 21:11:09 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-17 21:11:09 LOG3 vw_send: To DATATAKING: pnt tr 1.31 10.9355679985 -CF 2009-May-17 21:11:09 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-17 21:11:09 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-17 21:11:09 LOG5 finish_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-May-17 21:11:09 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-17 21:11:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:11:09 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-17 21:11:09 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-May-17 21:11:09 START begin_task: Starting task 'rotate ALFA to +18 degrees' 2009-May-17 21:11:09 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-May-17 21:11:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +18 degrees ...} 2009-May-17 21:11:09 INFO2 rotate_alfa: ALFA commanded to +18.0 degrees 2009-May-17 21:11:09 LOG3 sock_errsend: To ALFAMOTOR: POSITION 18.0 REPLY 2009-May-17 21:11:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-May-17 21:11:09 START begin_task: Starting task 'waiting on ALFA rotation' 2009-May-17 21:11:09 LOG5 begin_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2009-May-17 21:11:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_062" 2009-May-17 21:11:09 LOG4 got_cormsg: From DATATAKING: set ra 1.31 2009-May-17 21:11:09 LOG4 got_cormsg: From DATATAKING: set dec 10.9355679985 2009-May-17 21:11:09 LOG4 got_cormsg: From DATATAKING: vw% 1.31 2009-May-17 21:11:10 LOG4 got_cormsg: From DATATAKING: vw% 10.9355679985 2009-May-17 21:11:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:11:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-17 21:11:10 LOG4 got_cormsg: From DATATAKING: pnt tr 1.31 10.9355679985 -CF 2009-May-17 21:11:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-17 21:11:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-17 21:11:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:11:24 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-May-17 21:11:24 INFO3 alfa_motor: ALFA rotator in-position +18.00 degrees 2009-May-17 21:11:24 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-May-17 21:11:24 LOG5 end_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2009-May-17 21:11:24 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-17 21:11:24 STOP finish_task: Finishing task 'rotate ALFA to +18 degrees' 2009-May-17 21:11:24 LOG5 finish_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-May-17 21:11:24 INFO2 finish_task: DONE finished configuration: rotating ALFA to +18 degrees 2009-May-17 21:11:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:11:24 STOP end_task: Finishing task 'rotate ALFA to +18 degrees' with status 'OK' 2009-May-17 21:11:24 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-May-17 21:11:24 START begin_task: Starting task 'waiting on telescope' 2009-May-17 21:11:24 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2009-May-17 21:11:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-17 21:11:24 LOG3 waittrk: Start waittrk 5 2009-May-17 21:11:24 START begin_task: Starting task 'waiting on telescope movement' 2009-May-17 21:11:24 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2009-May-17 21:11:29 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-17 21:11:29 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2009-May-17 21:11:29 START begin_task: Starting task 'waiting on telescope on source' 2009-May-17 21:11:29 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2009-May-17 21:12:33 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-17 21:12:33 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2009-May-17 21:12:33 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-17 21:12:33 INFO2 waittrk: Now tracking AGESVC1B_p3_062 2009-May-17 21:12:33 LOG4 waittrk: Current telescope position: Az = 360.96 ZA = 10.91 2009-May-17 21:12:33 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-17 21:12:33 LOG5 finish_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2009-May-17 21:12:33 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-17 21:12:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:12:33 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-17 21:12:33 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2009-May-17 21:12:33 START begin_task: Starting task 'selecting calibration type' 2009-May-17 21:12:33 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2009-May-17 21:12:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-17 21:12:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-17 21:12:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-17 21:12:33 START begin_task: Starting task 'waiting on setcal' 2009-May-17 21:12:33 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-May-17 21:12:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-17 21:12:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-17 21:12:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:12:34 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-17 21:12:34 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-17 21:12:34 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-May-17 21:12:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-17 21:12:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 21:12:34 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-17 21:12:34 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 21:12:34 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-May-17 21:12:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:12:34 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 21:12:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 21:12:34 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-May-17 21:12:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 21:12:34 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-17 21:12:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 21:12:34 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-17 21:12:34 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 21:12:34 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-May-17 21:12:34 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 21:12:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 21:12:34 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-May-17 21:12:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 21:12:34 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-17 21:12:34 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-17 21:12:34 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2009-May-17 21:12:34 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-May-17 21:12:34 INFO2 astwait: Waiting for 30 seconds from 01:12:34 to 01:13:04 UTC ... 2009-May-17 21:12:34 LOG4 send_obs_status: To obs_status: <1> TASKTIME 30 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-17 21:12:34 START begin_task: Starting task 'waiting on waiting for AST time' 2009-May-17 21:12:34 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-May-17 21:13:04 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-May-17 21:13:04 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-May-17 21:13:04 INFO3 astwait: Finished waiting 2009-May-17 21:13:04 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-17 21:13:04 LOG5 dopset_later: Calling 'dopset_later 61.298247590023337' 2009-May-17 21:13:04 INFO3 dopset_later: Setting Doppler correction for 21:14:04 (61.3 seconds from now) 2009-May-17 21:13:04 LOG5 antvel: Calling 'antvel 1.310000 10.935568 F 61.298247590023337' 2009-May-17 21:13:04 LOG2 antvel: Transforming current Az = 1.31 ZA = 10.94 to apparent RA = 12:29:30.1 Dec = +07:25:15.4 2009-May-17 21:13:04 LOG2 antvel: Parameters to Doppler: Heliocentric 90844 2009 137 0.0 2009-May-17 21:13:04 INFO5 antvel: Computed antenna velocity: +23.09625 km/s 2009-May-17 21:13:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=23.0962496143 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-May-17 21:13:04 INFO4 dopset_gen: New sky frequencies: 1381.137025 1381.137025 1381.137025 1381.137025 1381.137025 1381.137025 1381.137025 1381.137025 1381.137025 2009-May-17 21:13:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.137025 sky0=1381.137025 sky1=1381.137025 sky2=1381.137025 sky3=1381.137025 sky4=1381.137025 sky5=1381.137025 sky6=1381.137025 sky7=1381.137025 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 21:13:04 LOG2 dopset_gen: Result from 'sky2syn': 1631.137025 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 21:13:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631137025.0} 2009-May-17 21:13:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 21:13:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-May-17 21:13:04 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-May-17 21:13:04 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:28:03.2 Dec = +07:28:22.0 2009-May-17 21:13:04 LOG3 track_source: Calling 'track_source AGESVC1B_p3_062 122803.2 072822.0 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-17 21:13:04 START begin_task: Starting task 'sending tracking commands' 2009-May-17 21:13:04 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-May-17 21:13:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_062} INFO {Slewing to source 'AGESVC1B_p3_062' ...} 2009-May-17 21:13:04 INFO1 track_source: Starting to track AGESVC1B_p3_062 2009-May-17 21:13:04 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_062" 2009-May-17 21:13:04 LOG3 vw_send: To DATATAKING: set ra 122803.2 2009-May-17 21:13:04 LOG3 vw_send: To DATATAKING: set dec 072822.0 2009-May-17 21:13:04 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-17 21:13:04 LOG3 vw_send: To DATATAKING: pnt tr 122803.2 072822.0 -CJ 2009-May-17 21:13:04 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-17 21:13:04 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-17 21:13:04 LOG5 finish_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-May-17 21:13:04 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-17 21:13:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:13:04 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-17 21:13:04 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-May-17 21:13:04 START begin_task: Starting task 'waiting on telescope' 2009-May-17 21:13:04 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-May-17 21:13:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-17 21:13:04 LOG3 waittrk: Start waittrk 5 2009-May-17 21:13:04 START begin_task: Starting task 'waiting on telescope movement' 2009-May-17 21:13:04 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2009-May-17 21:13:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631137025.0} 2009-May-17 21:13:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 21:13:04 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_062" 2009-May-17 21:13:04 LOG4 got_cormsg: From DATATAKING: set ra 122803.2 2009-May-17 21:13:04 LOG4 got_cormsg: From DATATAKING: set dec 072822.0 2009-May-17 21:13:04 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-17 21:13:04 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-17 21:13:04 LOG4 got_cormsg: From DATATAKING: pnt tr 122803.2 072822.0 -CJ 2009-May-17 21:13:04 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-17 21:13:04 LOG4 got_cormsg: From DATATAKING: vw% 122803.2 2009-May-17 21:13:04 LOG4 got_cormsg: From DATATAKING: vw% 072822.0 2009-May-17 21:13:04 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2009-May-17 21:13:09 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-17 21:13:09 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2009-May-17 21:13:09 START begin_task: Starting task 'waiting on telescope on source' 2009-May-17 21:13:09 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2009-May-17 21:13:11 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-17 21:13:11 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2009-May-17 21:13:11 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-17 21:13:11 INFO2 waittrk: Now tracking AGESVC1B_p3_062 2009-May-17 21:13:11 LOG4 waittrk: Current telescope position: Az = 361.05 ZA = 10.91 2009-May-17 21:13:11 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-17 21:13:11 LOG5 finish_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-May-17 21:13:11 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-17 21:13:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:13:11 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-17 21:13:11 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-May-17 21:13:11 START begin_task: Starting task 'adjusting WAPP power' 2009-May-17 21:13:11 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2009-May-17 21:13:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-May-17 21:13:11 INFO2 adjust_power: Starting to adjust WAPP power 2009-May-17 21:13:11 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-May-17 21:13:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-May-17 21:13:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-17 21:13:11 START begin_task: Starting task 'waiting on adjpwrif2' 2009-May-17 21:13:11 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2009-May-17 21:13:11 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-May-17 21:13:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-17 21:13:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:13:14 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-17 21:13:14 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-May-17 21:13:14 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2009-May-17 21:13:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-May-17 21:13:14 START begin_task: Starting task 'adjusting WAPP power' 2009-May-17 21:13:14 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2009-May-17 21:13:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-May-17 21:13:14 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 21:13:14 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 21:13:14 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 21:13:14 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 21:13:15 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-May-17 21:13:15 LOG5 begin_task: Level: (5) ID = <10138> Status = 0 0 0 0 ok 2009-May-17 21:13:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-May-17 21:13:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:13:15 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 7 7 dB 2009-May-17 21:13:15 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 4 dB 2009-May-17 21:13:15 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2009-May-17 21:13:15 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 4 0 dB 2009-May-17 21:13:15 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-May-17 21:13:15 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-May-17 21:13:15 LOG5 end_task: Level: (5) ID = <10138> Status = 0 0 0 0 ok 2009-May-17 21:13:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.114 1.012 ALFA beam 1: 0.964 0.965 2009-May-17 21:13:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.087 1.063 ALFA beam 3: 0.936 0.947 2009-May-17 21:13:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.971 0.915 ALFA beam 5: 0.921 1.037 2009-May-17 21:13:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.025 0.110 ALFA beam 7: 0.877 0.136 2009-May-17 21:13:15 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-17 21:13:15 LOG5 finish_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2009-May-17 21:13:15 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-May-17 21:13:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:13:15 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-17 21:13:15 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2009-May-17 21:13:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-17 21:13:15 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-17 21:13:15 LOG5 finish_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2009-May-17 21:13:15 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-May-17 21:13:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:13:15 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-17 21:13:15 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2009-May-17 21:13:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-May-17 21:13:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-May-17 21:13:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-May-17 21:13:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-May-17 21:13:15 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-May-17 21:13:15 START begin_task: Starting task 'WAPP calibration' 2009-May-17 21:13:15 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2009-May-17 21:13:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-May-17 21:13:15 START begin_task: Starting task 'selecting calibration type' 2009-May-17 21:13:15 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-May-17 21:13:15 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-17 21:13:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-17 21:13:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-17 21:13:15 START begin_task: Starting task 'waiting on setcal' 2009-May-17 21:13:15 LOG5 begin_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2009-May-17 21:13:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-May-17 21:13:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-17 21:13:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-17 21:13:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:13:16 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-17 21:13:16 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-17 21:13:16 LOG5 end_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2009-May-17 21:13:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-17 21:13:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 21:13:16 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-17 21:13:16 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 21:13:16 LOG5 begin_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2009-May-17 21:13:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:13:16 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 21:13:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 21:13:16 LOG5 end_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2009-May-17 21:13:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 21:13:16 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-17 21:13:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 21:13:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-17 21:13:16 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 21:13:16 LOG5 begin_task: Level: (5) ID = <10143> Status = 0 0 0 0 ok 2009-May-17 21:13:16 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 21:13:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 21:13:16 LOG5 end_task: Level: (5) ID = <10143> Status = 0 0 0 0 ok 2009-May-17 21:13:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 21:13:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-17 21:13:16 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-17 21:13:16 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-May-17 21:13:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-May-17 21:13:16 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-May-17 21:13:16 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-May-17 21:13:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-17 21:13:16 LOG5 begin_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2009-May-17 21:13:16 NOTE WAPPDATA-new_file: New FITS file: wapp.20090517.a2048.0003.fits 2009-May-17 21:13:16 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-17 21:13:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-May-17 21:13:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-17 21:13:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-17 21:13:16 LOG5 end_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2009-May-17 21:13:16 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-May-17 21:13:16 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-May-17 21:13:16 START begin_task: Starting task 'WAPP spectral observation' 2009-May-17 21:13:16 LOG5 begin_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2009-May-17 21:13:16 LOG5 log_alfabeam: Parameters: 12.467555555555554 7.472777777777778 12.494999 2009.3775064009938 18.000000 2009-May-17 21:13:16 LOG4 log_alfabeam: ALFABEAM 0 12.467555555555640 7.472777777777781 2009-May-17 21:13:16 LOG4 log_alfabeam: ALFABEAM 1 12.466469841818464 7.577579086838951 2009-May-17 21:13:16 LOG4 log_alfabeam: ALFABEAM 2 12.461786773663791 7.508283074317857 2009-May-17 21:13:16 LOG4 log_alfabeam: ALFABEAM 3 12.462838424561889 7.403383185567550 2009-May-17 21:13:16 LOG4 log_alfabeam: ALFABEAM 4 12.468664875317483 7.367999285752899 2009-May-17 21:13:16 LOG4 log_alfabeam: ALFABEAM 5 12.473359375126472 7.437924614408412 2009-May-17 21:13:16 LOG4 log_alfabeam: ALFABEAM 6 12.472216030009875 7.542600319456621 2009-May-17 21:13:16 INFO2 take_data: Starting WAPP scan: 913700209 2009-May-17 21:13:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-May-17 21:13:17 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-17 21:13:17 LOG5 begin_task: Level: (5) ID = <10146> Status = 0 0 0 0 ok 2009-May-17 21:13:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 21:13:17 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090517.a2048.0003.fits} 2009-May-17 21:13:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:13:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.114 1.012 0.964 0.965 2009-May-17 21:13:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.063 0.936 0.947 2009-May-17 21:13:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.971 0.915 0.921 1.037 2009-May-17 21:13:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.110 0.877 0.136 2009-May-17 21:13:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4398.00 2009-May-17 21:13:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.137025 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 21:13:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.137025 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 21:13:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.137025 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 21:13:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.137025 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 21:13:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.137025 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 21:13:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.137025 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 21:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 21:13:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.137025 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 21:13:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.137025 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 21:13:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.137025 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 21:13:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 21:13:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-17 21:13:23 LOG5 end_task: Level: (5) ID = <10146> Status = 0 0 0 0 ok 2009-May-17 21:13:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-17 21:13:23 LOG5 end_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2009-May-17 21:13:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-May-17 21:13:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-17 21:13:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-17 21:13:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-17 21:13:23 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2009-May-17 21:13:24 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-17 21:13:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-17 21:13:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-17 21:13:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-17 21:13:24 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2009-May-17 21:13:24 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-May-17 21:13:24 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-May-17 21:13:24 START begin_task: Starting task 'WAPP spectral observation' 2009-May-17 21:13:24 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2009-May-17 21:13:24 LOG5 log_alfabeam: Parameters: 12.467555555555554 7.472777777777778 12.496949 2009.3775066228104 18.000000 2009-May-17 21:13:24 LOG4 log_alfabeam: ALFABEAM 0 12.467555555555629 7.472777777777781 2009-May-17 21:13:24 LOG4 log_alfabeam: ALFABEAM 1 12.466487837720358 7.577619966402663 2009-May-17 21:13:24 LOG4 log_alfabeam: ALFABEAM 2 12.461792884606913 7.508501961181483 2009-May-17 21:13:24 LOG4 log_alfabeam: ALFABEAM 3 12.462826531507412 7.403562493503972 2009-May-17 21:13:24 LOG4 log_alfabeam: ALFABEAM 4 12.468646890027841 7.367957508049412 2009-May-17 21:13:24 LOG4 log_alfabeam: ALFABEAM 5 12.473353371450086 7.437704346530481 2009-May-17 21:13:24 LOG4 log_alfabeam: ALFABEAM 6 12.472228002817983 7.542423129061211 2009-May-17 21:13:24 INFO2 take_data: Starting WAPP scan: 913700210 2009-May-17 21:13:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-May-17 21:13:24 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-17 21:13:24 LOG5 begin_task: Level: (5) ID = <10149> Status = 0 0 0 0 ok 2009-May-17 21:13:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 21:13:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4405.00 2009-May-17 21:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.514 (still bad) 2009-May-17 21:13:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.137025 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 21:13:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.137025 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 21:13:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.137025 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 21:13:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.137025 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 21:13:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.137025 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 21:13:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.137025 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 21:13:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.137025 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 21:13:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.137025 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 21:13:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.137025 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 21:13:30 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-May-17 21:13:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 21:13:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-17 21:13:30 LOG5 end_task: Level: (5) ID = <10149> Status = 0 0 0 0 ok 2009-May-17 21:13:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-17 21:13:30 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2009-May-17 21:13:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-17 21:13:30 STOP finish_task: Finishing task 'WAPP calibration' 2009-May-17 21:13:30 LOG5 finish_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2009-May-17 21:13:30 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-May-17 21:13:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:13:30 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-May-17 21:13:30 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2009-May-17 21:13:31 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-May-17 21:13:31 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 1.31 and ZA = 10.94 2009-May-17 21:13:31 LOG3 track_source: Calling 'track_source AGESVC1B_p3_062 1.31 10.9355679985 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-17 21:13:31 START begin_task: Starting task 'sending tracking commands' 2009-May-17 21:13:31 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2009-May-17 21:13:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_062} INFO {Slewing to source 'AGESVC1B_p3_062' ...} 2009-May-17 21:13:31 INFO1 track_source: Starting to track AGESVC1B_p3_062 2009-May-17 21:13:31 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_062" 2009-May-17 21:13:31 LOG3 vw_send: To DATATAKING: set ra 1.31 2009-May-17 21:13:31 LOG3 vw_send: To DATATAKING: set dec 10.9355679985 2009-May-17 21:13:31 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-17 21:13:31 LOG3 vw_send: To DATATAKING: pnt tr 1.31 10.9355679985 -CF 2009-May-17 21:13:31 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-17 21:13:31 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-17 21:13:31 LOG5 finish_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2009-May-17 21:13:31 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-17 21:13:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:13:31 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-17 21:13:31 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2009-May-17 21:13:31 LOG1 fixed_driftmap: Parameters: HA = +00:01:00.1 Start = 12:30:30.4 LST = 12:29:56.0 diff = 34.4 secs 2009-May-17 21:13:31 INFO2 fixed_driftmap: Waiting 32.4 seconds for RA 12:29:30 2009-May-17 21:13:31 INFO2 lstwait: Waiting for 32.3 secs from LST 12:29:56 to LST 12:30:28 ... 2009-May-17 21:13:31 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.305625778818353 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-17 21:13:31 START begin_task: Starting task 'waiting on wait on LST' 2009-May-17 21:13:31 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2009-May-17 21:13:31 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_062" 2009-May-17 21:13:31 LOG4 got_cormsg: From DATATAKING: set ra 1.31 2009-May-17 21:13:31 LOG4 got_cormsg: From DATATAKING: set dec 10.9355679985 2009-May-17 21:13:31 LOG4 got_cormsg: From DATATAKING: vw% 1.31 2009-May-17 21:13:31 LOG4 got_cormsg: From DATATAKING: vw% 10.9355679985 2009-May-17 21:13:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:13:31 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-17 21:13:31 LOG4 got_cormsg: From DATATAKING: pnt tr 1.31 10.9355679985 -CF 2009-May-17 21:13:31 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-17 21:13:31 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-17 21:13:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 21:14:03 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-May-17 21:14:03 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2009-May-17 21:14:03 LOG4 lstwait: Finished waiting 0.70 seconds late 2009-May-17 21:14:03 INFO3 lstwait: Finished waiting 2009-May-17 21:14:03 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-17 21:14:03 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-May-17 21:14:03 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-May-17 21:14:03 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-May-17 21:14:03 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-May-17 21:14:03 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-May-17 21:14:03 START begin_task: Starting task 'WAPP spectral observation' 2009-May-17 21:14:03 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2009-May-17 21:14:03 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-May-17 21:14:03 INFO2 take_data: Starting WAPP scan: 913700211 2009-May-17 21:14:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-May-17 21:14:04 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-17 21:14:04 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2009-May-17 21:14:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 21:14:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4445.00 2009-May-17 21:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.137025 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 21:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.137025 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 21:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.137025 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 21:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.137025 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 21:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.137025 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 21:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.137025 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 21:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.137025 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 21:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.137025 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 21:14:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.137025 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 21:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 21:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.073 (still bad) 2009-May-17 21:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:14:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:14:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 0.978 0.961 0.961 2009-May-17 21:14:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.058 0.932 0.943 2009-May-17 21:14:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.965 0.907 0.919 1.033 2009-May-17 21:14:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.110 0.890 0.136 2009-May-17 21:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.073 (still bad) 2009-May-17 21:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.073 (still bad) 2009-May-17 21:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.073 (still bad) 2009-May-17 21:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.073 (still bad) 2009-May-17 21:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:15:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:15:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 0.977 0.960 0.960 2009-May-17 21:15:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 1.056 0.929 0.943 2009-May-17 21:15:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.964 0.906 0.921 1.035 2009-May-17 21:15:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.110 0.891 0.136 2009-May-17 21:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.072 (still bad) 2009-May-17 21:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:16:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:16:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 0.978 0.961 0.962 2009-May-17 21:16:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.053 0.930 0.944 2009-May-17 21:16:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.969 0.909 0.919 1.034 2009-May-17 21:16:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.110 0.889 0.136 2009-May-17 21:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:17:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:17:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 0.979 0.985 0.983 2009-May-17 21:17:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.063 0.931 0.944 2009-May-17 21:17:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.964 0.903 0.921 1.034 2009-May-17 21:17:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.110 0.888 0.136 2009-May-17 21:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:18:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:18:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 0.975 0.961 0.961 2009-May-17 21:18:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 1.056 0.930 0.943 2009-May-17 21:18:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.961 0.902 0.918 1.034 2009-May-17 21:18:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.110 0.891 0.136 2009-May-17 21:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.073 (still bad) 2009-May-17 21:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.073 (still bad) 2009-May-17 21:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.071 (still bad) 2009-May-17 21:19:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:19:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 0.976 0.962 0.960 2009-May-17 21:19:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 1.051 0.932 0.944 2009-May-17 21:19:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.961 0.900 0.923 1.033 2009-May-17 21:19:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.110 0.891 0.136 2009-May-17 21:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.073 (still bad) 2009-May-17 21:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.073 (still bad) 2009-May-17 21:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.073 (still bad) 2009-May-17 21:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.073 (still bad) 2009-May-17 21:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.072 (still bad) 2009-May-17 21:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.073 (still bad) 2009-May-17 21:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.073 (still bad) 2009-May-17 21:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.072 (still bad) 2009-May-17 21:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:20:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:20:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 0.972 0.959 0.959 2009-May-17 21:20:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 1.045 0.930 0.943 2009-May-17 21:20:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.954 0.898 0.919 1.036 2009-May-17 21:20:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.110 0.889 0.135 2009-May-17 21:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.073 (still bad) 2009-May-17 21:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.073 (still bad) 2009-May-17 21:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:21:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:21:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.066 0.971 0.956 0.956 2009-May-17 21:21:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.046 0.936 0.948 2009-May-17 21:21:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.954 0.897 0.916 1.033 2009-May-17 21:21:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.110 0.889 0.135 2009-May-17 21:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.073 (still bad) 2009-May-17 21:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.072 (still bad) 2009-May-17 21:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.073 (still bad) 2009-May-17 21:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.073 (still bad) 2009-May-17 21:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.073 (still bad) 2009-May-17 21:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.073 (still bad) 2009-May-17 21:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:22:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:22:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.062 0.969 0.954 0.956 2009-May-17 21:22:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 1.049 0.931 0.944 2009-May-17 21:22:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.955 0.898 0.927 1.046 2009-May-17 21:22:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.110 0.891 0.136 2009-May-17 21:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:23:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:23:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 0.973 0.959 0.959 2009-May-17 21:23:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 1.050 0.955 0.969 2009-May-17 21:23:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.958 0.895 0.919 1.037 2009-May-17 21:23:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.110 0.893 0.135 2009-May-17 21:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 21:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 21:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.147 (still bad) 2009-May-17 21:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.168 (still bad) 2009-May-17 21:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.174 (still bad) 2009-May-17 21:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.171 (still bad) 2009-May-17 21:24:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:24:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.149 1.048 0.957 0.959 2009-May-17 21:24:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 1.048 0.931 0.944 2009-May-17 21:24:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.959 0.898 0.917 1.035 2009-May-17 21:24:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.110 0.891 0.135 2009-May-17 21:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 21:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.099 (still bad) 2009-May-17 21:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 21:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.149 (still bad) 2009-May-17 21:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.177 (still bad) 2009-May-17 21:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.203 (still bad) 2009-May-17 21:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.222 (still bad) 2009-May-17 21:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.222 (still bad) 2009-May-17 21:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.208 (still bad) 2009-May-17 21:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.182 (still bad) 2009-May-17 21:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.146 (still bad) 2009-May-17 21:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 21:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 21:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.087 (still bad) 2009-May-17 21:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.090 (still bad) 2009-May-17 21:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 21:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 21:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 21:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-May-17 21:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.090 (still bad) 2009-May-17 21:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:25:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:25:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.067 0.973 0.958 0.957 2009-May-17 21:25:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 1.050 0.931 0.944 2009-May-17 21:25:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.960 0.895 0.916 1.034 2009-May-17 21:25:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.023 0.110 0.889 0.136 2009-May-17 21:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.072 (still bad) 2009-May-17 21:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:26:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:26:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.067 0.974 0.960 0.957 2009-May-17 21:26:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.050 0.933 0.946 2009-May-17 21:26:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.965 0.903 0.917 1.035 2009-May-17 21:26:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.110 0.890 0.136 2009-May-17 21:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.073 (still bad) 2009-May-17 21:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.073 (still bad) 2009-May-17 21:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.089 (still bad) 2009-May-17 21:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 21:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.097 (still bad) 2009-May-17 21:27:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:27:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 0.976 0.964 0.962 2009-May-17 21:27:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.104 1.083 0.936 0.947 2009-May-17 21:27:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.965 0.903 0.923 1.037 2009-May-17 21:27:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 0.110 0.892 0.136 2009-May-17 21:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 21:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 21:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 21:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 21:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:28:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:28:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 0.978 0.963 0.964 2009-May-17 21:28:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 1.053 0.935 0.947 2009-May-17 21:28:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.965 0.901 0.925 1.038 2009-May-17 21:28:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.029 0.110 0.893 0.136 2009-May-17 21:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.080 (still bad) 2009-May-17 21:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.082 (still bad) 2009-May-17 21:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.082 (still bad) 2009-May-17 21:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2009-May-17 21:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.087 (still bad) 2009-May-17 21:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-May-17 21:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:29:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:29:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 0.987 0.965 0.963 2009-May-17 21:29:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 1.054 0.938 0.947 2009-May-17 21:29:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.968 0.902 0.925 1.040 2009-May-17 21:29:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.110 0.894 0.136 2009-May-17 21:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2009-May-17 21:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.087 (still bad) 2009-May-17 21:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:30:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:30:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 0.980 0.966 0.962 2009-May-17 21:30:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 1.058 0.934 0.947 2009-May-17 21:30:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.968 0.903 0.923 1.040 2009-May-17 21:30:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.110 0.893 0.136 2009-May-17 21:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:31:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:31:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 0.989 0.965 0.962 2009-May-17 21:31:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 1.057 0.937 0.951 2009-May-17 21:31:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.967 0.905 0.924 1.039 2009-May-17 21:31:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.110 0.893 0.136 2009-May-17 21:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.091 (still bad) 2009-May-17 21:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-May-17 21:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 21:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 21:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 21:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.088 (still bad) 2009-May-17 21:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.081 (still bad) 2009-May-17 21:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.081 (still bad) 2009-May-17 21:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.082 (still bad) 2009-May-17 21:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.080 (still bad) 2009-May-17 21:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.079 (still bad) 2009-May-17 21:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.079 (still bad) 2009-May-17 21:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.080 (still bad) 2009-May-17 21:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.078 (still bad) 2009-May-17 21:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.082 (still bad) 2009-May-17 21:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.079 (still bad) 2009-May-17 21:32:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:32:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 0.985 0.974 0.970 2009-May-17 21:32:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 1.060 0.937 0.951 2009-May-17 21:32:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.970 0.907 0.926 1.043 2009-May-17 21:32:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.110 0.895 0.136 2009-May-17 21:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2009-May-17 21:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.086 (still bad) 2009-May-17 21:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.090 (still bad) 2009-May-17 21:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.090 (still bad) 2009-May-17 21:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 21:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-May-17 21:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-May-17 21:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.087 (still bad) 2009-May-17 21:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.088 (still bad) 2009-May-17 21:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2009-May-17 21:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.087 (still bad) 2009-May-17 21:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.086 (still bad) 2009-May-17 21:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.087 (still bad) 2009-May-17 21:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.086 (still bad) 2009-May-17 21:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.085 (still bad) 2009-May-17 21:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2009-May-17 21:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.081 (still bad) 2009-May-17 21:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.082 (still bad) 2009-May-17 21:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.082 (still bad) 2009-May-17 21:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:33:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-May-17 21:33:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 0.991 0.974 0.971 2009-May-17 21:33:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 1.069 0.943 0.956 2009-May-17 21:33:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.977 0.912 0.930 1.050 2009-May-17 21:33:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.035 0.111 0.899 0.137 2009-May-17 21:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2009-May-17 21:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2009-May-17 21:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2009-May-17 21:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.088 (still bad) 2009-May-17 21:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.078 (still bad) 2009-May-17 21:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.081 (still bad) 2009-May-17 21:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.077 (still bad) 2009-May-17 21:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.081 (still bad) 2009-May-17 21:34:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 21:34:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-17 21:34:05 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2009-May-17 21:34:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-17 21:34:05 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2009-May-17 21:34:05 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-May-17 21:34:05 LOG5 finish_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-May-17 21:34:05 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-May-17 21:34:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-17 21:34:05 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-May-17 21:34:05 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-May-17 21:34:05 COMMAND run_command_line: EXECUTING command 33: 'ENDIF' 2009-May-17 21:34:05 COMMAND run_command_line: EXECUTING command 36: 'IF LSTSLEW(AGESVC1B_p3_064) < 125329 THEN' 2009-May-17 21:34:06 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1B_p3_064) < 125329 2009-May-17 21:34:06 INFO5 is_if_valid: Condition parsed as: 12.859559666666668 < 12.891388888888889 2009-May-17 21:34:06 COMMAND run_command_line: EXECUTING command 37: 'FIXEDDRIFT az=28.77 alfaangle=-4.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_064 ra=122900.00 dec=72530.00' 2009-May-17 21:34:06 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-May-17 21:34:06 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-17 21:34:06 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 28.77 -4.9 hcorcal 5 tracking no first 1 AGESVC1B_p3_064 122900.00 72530.00 J 8500.0 Heliocentric velocity(optical)' 2009-May-17 21:34:06 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-May-17 21:34:06 LOG5 begin_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2009-May-17 21:34:06 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1B_p3_062' 2009-May-17 21:34:06 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-May-17 21:34:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p3_064} 2009-May-17 21:34:06 INFO3 fixed_driftmap: Sending telescope to Az = 28.77 and ZA = 12.44 2009-May-17 21:34:06 LOG3 track_source: Calling 'track_source AGESVC1B_p3_064 28.77 12.4385691810 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-17 21:34:06 START begin_task: Starting task 'sending tracking commands' 2009-May-17 21:34:06 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2009-May-17 21:34:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_064} INFO {Slewing to source 'AGESVC1B_p3_064' ...} 2009-May-17 21:34:06 INFO1 track_source: Starting to track AGESVC1B_p3_064 2009-May-17 21:34:06 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_064" 2009-May-17 21:34:06 LOG3 vw_send: To DATATAKING: set ra 28.77 2009-May-17 21:34:06 LOG3 vw_send: To DATATAKING: set dec 12.4385691810 2009-May-17 21:34:06 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-17 21:34:06 LOG3 vw_send: To DATATAKING: pnt tr 28.77 12.4385691810 -CF 2009-May-17 21:34:06 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-17 21:34:06 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-17 21:34:06 LOG5 finish_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2009-May-17 21:34:06 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-17 21:34:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:34:06 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-17 21:34:06 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2009-May-17 21:34:06 START begin_task: Starting task 'rotate ALFA to -4.9 degrees' 2009-May-17 21:34:06 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-May-17 21:34:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -4.9 degrees ...} 2009-May-17 21:34:06 INFO2 rotate_alfa: ALFA commanded to -4.9 degrees 2009-May-17 21:34:06 LOG3 sock_errsend: To ALFAMOTOR: POSITION -4.9 REPLY 2009-May-17 21:34:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-May-17 21:34:06 START begin_task: Starting task 'waiting on ALFA rotation' 2009-May-17 21:34:06 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2009-May-17 21:34:06 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_064" 2009-May-17 21:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.080 (still bad) 2009-May-17 21:34:07 LOG4 got_cormsg: From DATATAKING: set ra 28.77 2009-May-17 21:34:07 LOG4 got_cormsg: From DATATAKING: set dec 12.4385691810 2009-May-17 21:34:07 LOG4 got_cormsg: From DATATAKING: vw% 28.77 2009-May-17 21:34:07 LOG4 got_cormsg: From DATATAKING: vw% 12.4385691810 2009-May-17 21:34:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:34:07 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-17 21:34:07 LOG4 got_cormsg: From DATATAKING: pnt tr 28.77 12.4385691810 -CF 2009-May-17 21:34:07 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-17 21:34:07 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-17 21:34:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:34:20 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-May-17 21:34:20 INFO3 alfa_motor: ALFA rotator in-position -4.90 degrees 2009-May-17 21:34:20 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-May-17 21:34:20 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2009-May-17 21:34:20 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-17 21:34:20 STOP finish_task: Finishing task 'rotate ALFA to -4.9 degrees' 2009-May-17 21:34:20 LOG5 finish_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-May-17 21:34:20 INFO2 finish_task: DONE finished configuration: rotating ALFA to -4.9 degrees 2009-May-17 21:34:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:34:20 STOP end_task: Finishing task 'rotate ALFA to -4.9 degrees' with status 'OK' 2009-May-17 21:34:20 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-May-17 21:34:21 START begin_task: Starting task 'waiting on telescope' 2009-May-17 21:34:21 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2009-May-17 21:34:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-17 21:34:21 LOG3 waittrk: Start waittrk 5 2009-May-17 21:34:21 START begin_task: Starting task 'waiting on telescope movement' 2009-May-17 21:34:21 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2009-May-17 21:34:26 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-17 21:34:26 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2009-May-17 21:34:26 START begin_task: Starting task 'waiting on telescope on source' 2009-May-17 21:34:26 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2009-May-17 21:35:28 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-17 21:35:28 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2009-May-17 21:35:28 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-17 21:35:28 INFO2 waittrk: Now tracking AGESVC1B_p3_064 2009-May-17 21:35:28 LOG4 waittrk: Current telescope position: Az = 388.49 ZA = 12.41 2009-May-17 21:35:28 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-17 21:35:28 LOG5 finish_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2009-May-17 21:35:28 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-17 21:35:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:35:28 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-17 21:35:28 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2009-May-17 21:35:28 START begin_task: Starting task 'selecting calibration type' 2009-May-17 21:35:28 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2009-May-17 21:35:28 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-17 21:35:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-17 21:35:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-17 21:35:28 START begin_task: Starting task 'waiting on setcal' 2009-May-17 21:35:28 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-May-17 21:35:29 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-17 21:35:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-17 21:35:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:35:29 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-17 21:35:29 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-17 21:35:29 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-May-17 21:35:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-17 21:35:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 21:35:30 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-17 21:35:30 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 21:35:30 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2009-May-17 21:35:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:35:30 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 21:35:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 21:35:30 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2009-May-17 21:35:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 21:35:30 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-17 21:35:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 21:35:30 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-17 21:35:30 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 21:35:30 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2009-May-17 21:35:30 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 21:35:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 21:35:30 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2009-May-17 21:35:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 21:35:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-17 21:35:30 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-17 21:35:30 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2009-May-17 21:35:30 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-May-17 21:35:30 INFO2 astwait: Waiting for 30 seconds from 01:35:30 to 01:36:00 UTC ... 2009-May-17 21:35:30 LOG4 send_obs_status: To obs_status: <1> TASKTIME 30 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-17 21:35:30 START begin_task: Starting task 'waiting on waiting for AST time' 2009-May-17 21:35:30 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-May-17 21:36:00 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-May-17 21:36:00 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-May-17 21:36:00 INFO3 astwait: Finished waiting 2009-May-17 21:36:00 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-17 21:36:00 LOG5 dopset_later: Calling 'dopset_later 61.429930737962337' 2009-May-17 21:36:00 INFO3 dopset_later: Setting Doppler correction for 21:37:00 (61.4 seconds from now) 2009-May-17 21:36:00 LOG5 antvel: Calling 'antvel 28.770000 12.438569 F 61.429930737962337' 2009-May-17 21:36:00 LOG2 antvel: Transforming current Az = 28.77 ZA = 12.44 to apparent RA = 12:29:30.1 Dec = +07:22:15.4 2009-May-17 21:36:00 LOG2 antvel: Parameters to Doppler: Heliocentric 92220 2009 137 0.0 2009-May-17 21:36:00 INFO5 antvel: Computed antenna velocity: +23.14176 km/s 2009-May-17 21:36:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=23.1417640021 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-May-17 21:36:00 INFO4 dopset_gen: New sky frequencies: 1381.136815 1381.136815 1381.136815 1381.136815 1381.136815 1381.136815 1381.136815 1381.136815 1381.136815 2009-May-17 21:36:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.136815 sky0=1381.136815 sky1=1381.136815 sky2=1381.136815 sky3=1381.136815 sky4=1381.136815 sky5=1381.136815 sky6=1381.136815 sky7=1381.136815 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 21:36:00 LOG2 dopset_gen: Result from 'sky2syn': 1631.136815 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 21:36:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631136815.0} 2009-May-17 21:36:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 21:36:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-May-17 21:36:00 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-May-17 21:36:00 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:28:03.1 Dec = +07:25:22.0 2009-May-17 21:36:00 LOG3 track_source: Calling 'track_source AGESVC1B_p3_064 122803.1 072522.0 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-17 21:36:00 START begin_task: Starting task 'sending tracking commands' 2009-May-17 21:36:00 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2009-May-17 21:36:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_064} INFO {Slewing to source 'AGESVC1B_p3_064' ...} 2009-May-17 21:36:00 INFO1 track_source: Starting to track AGESVC1B_p3_064 2009-May-17 21:36:00 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_064" 2009-May-17 21:36:00 LOG3 vw_send: To DATATAKING: set ra 122803.1 2009-May-17 21:36:00 LOG3 vw_send: To DATATAKING: set dec 072522.0 2009-May-17 21:36:00 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-17 21:36:00 LOG3 vw_send: To DATATAKING: pnt tr 122803.1 072522.0 -CJ 2009-May-17 21:36:00 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-17 21:36:00 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-17 21:36:00 LOG5 finish_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2009-May-17 21:36:00 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-17 21:36:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:36:00 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-17 21:36:00 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2009-May-17 21:36:00 START begin_task: Starting task 'waiting on telescope' 2009-May-17 21:36:00 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-May-17 21:36:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-17 21:36:00 LOG3 waittrk: Start waittrk 5 2009-May-17 21:36:00 START begin_task: Starting task 'waiting on telescope movement' 2009-May-17 21:36:00 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2009-May-17 21:36:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631136815.0} 2009-May-17 21:36:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 21:36:00 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_064" 2009-May-17 21:36:00 LOG4 got_cormsg: From DATATAKING: set ra 122803.1 2009-May-17 21:36:00 LOG4 got_cormsg: From DATATAKING: set dec 072522.0 2009-May-17 21:36:00 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-17 21:36:00 LOG4 got_cormsg: From DATATAKING: vw% 122803.1 2009-May-17 21:36:00 LOG4 got_cormsg: From DATATAKING: vw% 072522.0 2009-May-17 21:36:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:36:00 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-17 21:36:00 LOG4 got_cormsg: From DATATAKING: pnt tr 122803.1 072522.0 -CJ 2009-May-17 21:36:00 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-17 21:36:00 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-17 21:36:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:36:05 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-17 21:36:05 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2009-May-17 21:36:05 START begin_task: Starting task 'waiting on telescope on source' 2009-May-17 21:36:05 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2009-May-17 21:36:07 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-17 21:36:07 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2009-May-17 21:36:07 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-17 21:36:07 INFO2 waittrk: Now tracking AGESVC1B_p3_064 2009-May-17 21:36:07 LOG4 waittrk: Current telescope position: Az = 388.56 ZA = 12.42 2009-May-17 21:36:07 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-17 21:36:07 LOG5 finish_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-May-17 21:36:07 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-17 21:36:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:36:07 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-17 21:36:07 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-May-17 21:36:07 START begin_task: Starting task 'adjusting WAPP power' 2009-May-17 21:36:07 LOG5 begin_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2009-May-17 21:36:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-May-17 21:36:07 INFO2 adjust_power: Starting to adjust WAPP power 2009-May-17 21:36:07 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-May-17 21:36:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-May-17 21:36:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-17 21:36:07 START begin_task: Starting task 'waiting on adjpwrif2' 2009-May-17 21:36:07 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2009-May-17 21:36:08 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-May-17 21:36:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-17 21:36:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:36:10 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-17 21:36:10 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-May-17 21:36:10 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2009-May-17 21:36:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-May-17 21:36:10 START begin_task: Starting task 'adjusting WAPP power' 2009-May-17 21:36:10 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2009-May-17 21:36:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-May-17 21:36:10 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 21:36:10 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 21:36:10 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 21:36:10 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 21:36:10 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-May-17 21:36:10 LOG5 begin_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2009-May-17 21:36:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:36:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-May-17 21:36:11 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 7 dB --- beam 1: 7 7 dB 2009-May-17 21:36:11 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 4 dB 2009-May-17 21:36:11 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2009-May-17 21:36:11 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 4 0 dB 2009-May-17 21:36:11 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-May-17 21:36:11 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-May-17 21:36:11 LOG5 end_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2009-May-17 21:36:11 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.976 0.911 ALFA beam 1: 0.987 0.968 2009-May-17 21:36:11 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.077 1.057 ALFA beam 3: 0.945 0.960 2009-May-17 21:36:11 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.974 0.904 ALFA beam 5: 0.940 1.049 2009-May-17 21:36:11 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.062 0.110 ALFA beam 7: 0.920 0.136 2009-May-17 21:36:11 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-17 21:36:11 LOG5 finish_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2009-May-17 21:36:11 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-May-17 21:36:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:36:11 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-17 21:36:11 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2009-May-17 21:36:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-17 21:36:11 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-17 21:36:11 LOG5 finish_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2009-May-17 21:36:11 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-May-17 21:36:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:36:11 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-17 21:36:11 LOG5 end_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2009-May-17 21:36:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-May-17 21:36:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-May-17 21:36:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-May-17 21:36:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-May-17 21:36:11 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-May-17 21:36:11 START begin_task: Starting task 'WAPP calibration' 2009-May-17 21:36:11 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2009-May-17 21:36:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-May-17 21:36:11 START begin_task: Starting task 'selecting calibration type' 2009-May-17 21:36:11 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2009-May-17 21:36:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-17 21:36:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-17 21:36:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-17 21:36:11 START begin_task: Starting task 'waiting on setcal' 2009-May-17 21:36:11 LOG5 begin_task: Level: (5) ID = <10176> Status = 0 0 0 0 ok 2009-May-17 21:36:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-May-17 21:36:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-17 21:36:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-17 21:36:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:36:12 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-17 21:36:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-17 21:36:12 LOG5 end_task: Level: (5) ID = <10176> Status = 0 0 0 0 ok 2009-May-17 21:36:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-17 21:36:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 21:36:12 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-17 21:36:12 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 21:36:12 LOG5 begin_task: Level: (5) ID = <10177> Status = 0 0 0 0 ok 2009-May-17 21:36:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:36:12 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 21:36:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 21:36:12 LOG5 end_task: Level: (5) ID = <10177> Status = 0 0 0 0 ok 2009-May-17 21:36:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 21:36:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-17 21:36:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 21:36:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-17 21:36:12 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 21:36:12 LOG5 begin_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2009-May-17 21:36:12 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 21:36:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 21:36:12 LOG5 end_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2009-May-17 21:36:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 21:36:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-17 21:36:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-17 21:36:12 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2009-May-17 21:36:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-May-17 21:36:12 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-May-17 21:36:12 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-May-17 21:36:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-17 21:36:12 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2009-May-17 21:36:12 NOTE WAPPDATA-new_file: New FITS file: wapp.20090517.a2048.0004.fits 2009-May-17 21:36:12 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-17 21:36:12 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090517.a2048.0004.fits} 2009-May-17 21:36:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-May-17 21:36:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-17 21:36:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-17 21:36:12 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2009-May-17 21:36:12 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-May-17 21:36:12 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-May-17 21:36:12 START begin_task: Starting task 'WAPP spectral observation' 2009-May-17 21:36:12 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2009-May-17 21:36:12 LOG5 log_alfabeam: Parameters: 12.467527777777779 7.4227777777777781 12.878267 2009.3775500038025 -4.900033 2009-May-17 21:36:12 LOG4 log_alfabeam: ALFABEAM 0 12.467527777777782 7.422777777777773 2009-May-17 21:36:12 LOG4 log_alfabeam: ALFABEAM 1 12.467160910438041 7.524462479543502 2009-May-17 21:36:12 LOG4 log_alfabeam: ALFABEAM 2 12.461823650019051 7.457199785724682 2009-May-17 21:36:12 LOG4 log_alfabeam: ALFABEAM 3 12.462194472052294 7.355313173281965 2009-May-17 21:36:12 LOG4 log_alfabeam: ALFABEAM 4 12.467944265476042 7.320949642805918 2009-May-17 21:36:12 LOG4 log_alfabeam: ALFABEAM 5 12.473243613189240 7.388980815824487 2009-May-17 21:36:12 LOG4 log_alfabeam: ALFABEAM 6 12.472831157563670 7.490607539901558 2009-May-17 21:36:12 INFO2 take_data: Starting WAPP scan: 913700212 2009-May-17 21:36:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-May-17 21:36:13 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-17 21:36:13 LOG5 begin_task: Level: (5) ID = <10181> Status = 0 0 0 0 ok 2009-May-17 21:36:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 21:36:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:36:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.976 0.911 0.987 0.968 2009-May-17 21:36:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 1.057 0.945 0.960 2009-May-17 21:36:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 0.904 0.940 1.049 2009-May-17 21:36:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.110 0.920 0.136 2009-May-17 21:36:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5774.00 2009-May-17 21:36:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.136815 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 21:36:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.136815 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 21:36:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.136815 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 21:36:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.136815 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 21:36:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.136815 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 21:36:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.136815 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 21:36:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.136815 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 21:36:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.136815 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 21:36:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.136815 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 21:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:36:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 21:36:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-17 21:36:19 LOG5 end_task: Level: (5) ID = <10181> Status = 0 0 0 0 ok 2009-May-17 21:36:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-17 21:36:19 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2009-May-17 21:36:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-May-17 21:36:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-17 21:36:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-17 21:36:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-17 21:36:19 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2009-May-17 21:36:19 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-17 21:36:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-17 21:36:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-17 21:36:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-17 21:36:19 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2009-May-17 21:36:19 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-May-17 21:36:19 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-May-17 21:36:19 START begin_task: Starting task 'WAPP spectral observation' 2009-May-17 21:36:19 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2009-May-17 21:36:19 LOG5 log_alfabeam: Parameters: 12.467527777777779 7.4227777777777781 12.880217 2009.3775502256192 -4.900033 2009-May-17 21:36:19 LOG4 log_alfabeam: ALFABEAM 0 12.467527777777780 7.422777777777775 2009-May-17 21:36:19 LOG4 log_alfabeam: ALFABEAM 1 12.467174309686607 7.524473080466022 2009-May-17 21:36:19 LOG4 log_alfabeam: ALFABEAM 2 12.461828197068865 7.457365956964107 2009-May-17 21:36:19 LOG4 log_alfabeam: ALFABEAM 3 12.462185594442115 7.355468854854820 2009-May-17 21:36:19 LOG4 log_alfabeam: ALFABEAM 4 12.467930797945957 7.320937754180338 2009-May-17 21:36:19 LOG4 log_alfabeam: ALFABEAM 5 12.473239133042378 7.388813587300765 2009-May-17 21:36:19 LOG4 log_alfabeam: ALFABEAM 6 12.472840119399313 7.490452307957211 2009-May-17 21:36:19 INFO2 take_data: Starting WAPP scan: 913700213 2009-May-17 21:36:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-May-17 21:36:20 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-17 21:36:20 LOG5 begin_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2009-May-17 21:36:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 21:36:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5781.00 2009-May-17 21:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.490 (still bad) 2009-May-17 21:36:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.136815 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 21:36:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.136815 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 21:36:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.136815 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 21:36:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.136815 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 21:36:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.136815 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 21:36:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.136815 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 21:36:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.136815 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 21:36:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.136815 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 21:36:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.136815 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 21:36:26 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-May-17 21:36:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 21:36:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-17 21:36:26 LOG5 end_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2009-May-17 21:36:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-17 21:36:26 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2009-May-17 21:36:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-17 21:36:26 STOP finish_task: Finishing task 'WAPP calibration' 2009-May-17 21:36:26 LOG5 finish_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2009-May-17 21:36:26 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-May-17 21:36:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:36:26 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-May-17 21:36:26 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2009-May-17 21:36:26 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-May-17 21:36:26 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 28.77 and ZA = 12.44 2009-May-17 21:36:26 LOG3 track_source: Calling 'track_source AGESVC1B_p3_064 28.77 12.4385691810 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-17 21:36:26 START begin_task: Starting task 'sending tracking commands' 2009-May-17 21:36:26 LOG5 begin_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2009-May-17 21:36:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_064} INFO {Slewing to source 'AGESVC1B_p3_064' ...} 2009-May-17 21:36:26 INFO1 track_source: Starting to track AGESVC1B_p3_064 2009-May-17 21:36:26 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_064" 2009-May-17 21:36:26 LOG3 vw_send: To DATATAKING: set ra 28.77 2009-May-17 21:36:26 LOG3 vw_send: To DATATAKING: set dec 12.4385691810 2009-May-17 21:36:26 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-17 21:36:26 LOG3 vw_send: To DATATAKING: pnt tr 28.77 12.4385691810 -CF 2009-May-17 21:36:26 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-17 21:36:26 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-17 21:36:26 LOG5 finish_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2009-May-17 21:36:26 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-17 21:36:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:36:27 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-17 21:36:27 LOG5 end_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2009-May-17 21:36:27 LOG1 fixed_driftmap: Parameters: HA = +00:24:00.0 Start = 12:53:30.3 LST = 12:52:55.8 diff = 34.5 secs 2009-May-17 21:36:27 INFO2 fixed_driftmap: Waiting 32.5 seconds for RA 12:29:30 2009-May-17 21:36:27 INFO2 lstwait: Waiting for 32.4 secs from LST 12:52:56 to LST 12:53:28 ... 2009-May-17 21:36:27 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.433718756200037 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-17 21:36:27 START begin_task: Starting task 'waiting on wait on LST' 2009-May-17 21:36:27 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2009-May-17 21:36:27 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_064" 2009-May-17 21:36:27 LOG4 got_cormsg: From DATATAKING: set ra 28.77 2009-May-17 21:36:27 LOG4 got_cormsg: From DATATAKING: set dec 12.4385691810 2009-May-17 21:36:27 LOG4 got_cormsg: From DATATAKING: vw% 28.77 2009-May-17 21:36:27 LOG4 got_cormsg: From DATATAKING: vw% 12.4385691810 2009-May-17 21:36:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:36:27 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-17 21:36:27 LOG4 got_cormsg: From DATATAKING: pnt tr 28.77 12.4385691810 -CF 2009-May-17 21:36:27 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-17 21:36:27 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-17 21:36:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:36:59 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-May-17 21:36:59 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2009-May-17 21:36:59 LOG4 lstwait: Finished waiting 0.57 seconds late 2009-May-17 21:36:59 INFO3 lstwait: Finished waiting 2009-May-17 21:36:59 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-17 21:36:59 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-May-17 21:36:59 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-May-17 21:36:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-May-17 21:36:59 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-May-17 21:36:59 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-May-17 21:36:59 START begin_task: Starting task 'WAPP spectral observation' 2009-May-17 21:36:59 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2009-May-17 21:36:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-May-17 21:36:59 INFO2 take_data: Starting WAPP scan: 913700214 2009-May-17 21:37:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-May-17 21:37:00 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-17 21:37:00 LOG5 begin_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2009-May-17 21:37:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 21:37:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5821.00 2009-May-17 21:37:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.136815 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 21:37:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.136815 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 21:37:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.136815 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 21:37:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.136815 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 21:37:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.136815 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 21:37:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.136815 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 21:37:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.136815 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 21:37:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.136815 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 21:37:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.136815 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 21:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:37:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:37:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.863 0.784 0.971 0.950 2009-May-17 21:37:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 1.060 0.948 0.960 2009-May-17 21:37:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.975 0.904 0.944 1.047 2009-May-17 21:37:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.110 0.920 0.136 2009-May-17 21:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:38:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:38:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.865 0.784 0.974 0.951 2009-May-17 21:38:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 1.059 0.951 0.961 2009-May-17 21:38:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.977 0.905 0.941 1.043 2009-May-17 21:38:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.110 0.922 0.136 2009-May-17 21:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.087 (still bad) 2009-May-17 21:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:39:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:39:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.876 0.794 0.972 0.949 2009-May-17 21:39:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 1.058 0.948 0.958 2009-May-17 21:39:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.977 0.905 0.942 1.043 2009-May-17 21:39:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 0.110 0.921 0.136 2009-May-17 21:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.088 (still bad) 2009-May-17 21:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.087 (still bad) 2009-May-17 21:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.088 (still bad) 2009-May-17 21:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.087 (still bad) 2009-May-17 21:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 21:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.087 (still bad) 2009-May-17 21:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:40:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:40:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.860 0.783 0.988 0.962 2009-May-17 21:40:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 1.059 0.948 0.956 2009-May-17 21:40:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 0.905 0.941 1.044 2009-May-17 21:40:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.110 0.920 0.136 2009-May-17 21:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:41:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:41:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.857 0.781 0.972 0.947 2009-May-17 21:41:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 1.054 0.947 0.955 2009-May-17 21:41:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.971 0.899 0.941 1.042 2009-May-17 21:41:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.110 0.921 0.136 2009-May-17 21:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:42:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:42:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.860 0.784 0.977 0.950 2009-May-17 21:42:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 1.057 0.954 0.961 2009-May-17 21:42:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.973 0.906 0.944 1.048 2009-May-17 21:42:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.110 0.927 0.136 2009-May-17 21:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.074 (still bad) 2009-May-17 21:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.075 (still bad) 2009-May-17 21:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:43:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:43:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.857 0.781 0.971 0.945 2009-May-17 21:43:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 1.052 0.949 0.955 2009-May-17 21:43:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.967 0.897 0.941 1.047 2009-May-17 21:43:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 0.110 0.923 0.136 2009-May-17 21:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.089 (still bad) 2009-May-17 21:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 21:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.098 (still bad) 2009-May-17 21:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-May-17 21:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-May-17 21:44:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:44:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.856 0.778 0.969 0.944 2009-May-17 21:44:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.097 1.066 0.949 0.957 2009-May-17 21:44:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.966 0.895 0.936 1.042 2009-May-17 21:44:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.110 0.921 0.136 2009-May-17 21:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 21:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.088 (still bad) 2009-May-17 21:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.088 (still bad) 2009-May-17 21:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.076 (still bad) 2009-May-17 21:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.077 (still bad) 2009-May-17 21:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:45:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:45:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.853 0.776 0.969 0.943 2009-May-17 21:45:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 1.050 0.950 0.957 2009-May-17 21:45:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.965 0.894 0.952 1.058 2009-May-17 21:45:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.110 0.921 0.135 2009-May-17 21:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 21:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 21:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 21:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 21:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 21:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 21:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-May-17 21:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.078 (still bad) 2009-May-17 21:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.091 (still bad) 2009-May-17 21:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.091 (still bad) 2009-May-17 21:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 21:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 21:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 21:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.093 (still bad) 2009-May-17 21:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 21:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.088 (still bad) 2009-May-17 21:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:46:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:46:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.856 0.779 0.967 0.945 2009-May-17 21:46:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 1.051 0.960 0.968 2009-May-17 21:46:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.965 0.897 0.944 1.042 2009-May-17 21:46:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.110 0.923 0.136 2009-May-17 21:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.082 (still bad) 2009-May-17 21:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.089 (still bad) 2009-May-17 21:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.088 (still bad) 2009-May-17 21:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.088 (still bad) 2009-May-17 21:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.088 (still bad) 2009-May-17 21:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.086 (still bad) 2009-May-17 21:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.087 (still bad) 2009-May-17 21:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-May-17 21:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 21:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.162 (still bad) 2009-May-17 21:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.187 (still bad) 2009-May-17 21:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.197 (still bad) 2009-May-17 21:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.191 (still bad) 2009-May-17 21:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.177 (still bad) 2009-May-17 21:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.146 (still bad) 2009-May-17 21:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.091 (still bad) 2009-May-17 21:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.080 (still bad) 2009-May-17 21:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2009-May-17 21:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2009-May-17 21:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.082 (still bad) 2009-May-17 21:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:47:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-May-17 21:47:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.859 0.782 1.050 1.025 2009-May-17 21:47:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 1.052 0.949 0.958 2009-May-17 21:47:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.967 0.900 0.939 1.043 2009-May-17 21:47:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.111 0.923 0.136 2009-May-17 21:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.082 (still bad) 2009-May-17 21:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.081 (still bad) 2009-May-17 21:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.089 (still bad) 2009-May-17 21:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-May-17 21:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-May-17 21:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-May-17 21:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-May-17 21:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-May-17 21:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-May-17 21:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-May-17 21:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-May-17 21:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-May-17 21:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 21:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-May-17 21:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-May-17 21:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-May-17 21:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-May-17 21:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.095 (still bad) 2009-May-17 21:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.090 (still bad) 2009-May-17 21:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.087 (still bad) 2009-May-17 21:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.088 (still bad) 2009-May-17 21:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.086 (still bad) 2009-May-17 21:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.086 (still bad) 2009-May-17 21:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.087 (still bad) 2009-May-17 21:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.085 (still bad) 2009-May-17 21:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.080 (still bad) 2009-May-17 21:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:48:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-May-17 21:48:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.860 0.779 0.969 0.947 2009-May-17 21:48:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 1.055 0.950 0.959 2009-May-17 21:48:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.971 0.903 0.943 1.045 2009-May-17 21:48:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.111 0.920 0.136 2009-May-17 21:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.086 (still bad) 2009-May-17 21:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.081 (still bad) 2009-May-17 21:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.079 (still bad) 2009-May-17 21:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.081 (still bad) 2009-May-17 21:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.079 (still bad) 2009-May-17 21:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.088 (still bad) 2009-May-17 21:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.081 (still bad) 2009-May-17 21:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.081 (still bad) 2009-May-17 21:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.080 (still bad) 2009-May-17 21:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.081 (still bad) 2009-May-17 21:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.086 (still bad) 2009-May-17 21:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.086 (still bad) 2009-May-17 21:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.079 (still bad) 2009-May-17 21:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.081 (still bad) 2009-May-17 21:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.088 (still bad) 2009-May-17 21:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.080 (still bad) 2009-May-17 21:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:49:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:49:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.859 0.781 0.970 0.947 2009-May-17 21:49:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 1.053 0.950 0.960 2009-May-17 21:49:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.977 0.908 0.943 1.045 2009-May-17 21:49:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.110 0.925 0.136 2009-May-17 21:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.089 (still bad) 2009-May-17 21:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.082 (still bad) 2009-May-17 21:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.080 (still bad) 2009-May-17 21:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.090 (still bad) 2009-May-17 21:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.080 (still bad) 2009-May-17 21:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.080 (still bad) 2009-May-17 21:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2009-May-17 21:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.088 (still bad) 2009-May-17 21:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.081 (still bad) 2009-May-17 21:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.080 (still bad) 2009-May-17 21:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.081 (still bad) 2009-May-17 21:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.088 (still bad) 2009-May-17 21:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.080 (still bad) 2009-May-17 21:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.081 (still bad) 2009-May-17 21:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:50:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:50:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.861 0.783 0.975 0.948 2009-May-17 21:50:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.055 0.954 0.962 2009-May-17 21:50:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 0.907 0.942 1.047 2009-May-17 21:50:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.110 0.924 0.136 2009-May-17 21:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.089 (still bad) 2009-May-17 21:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.088 (still bad) 2009-May-17 21:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.087 (still bad) 2009-May-17 21:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2009-May-17 21:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.082 (still bad) 2009-May-17 21:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.081 (still bad) 2009-May-17 21:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2009-May-17 21:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.085 (still bad) 2009-May-17 21:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.086 (still bad) 2009-May-17 21:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.081 (still bad) 2009-May-17 21:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.082 (still bad) 2009-May-17 21:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2009-May-17 21:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2009-May-17 21:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.082 (still bad) 2009-May-17 21:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.086 (still bad) 2009-May-17 21:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.085 (still bad) 2009-May-17 21:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.082 (still bad) 2009-May-17 21:51:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-May-17 21:51:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.867 0.785 0.976 0.951 2009-May-17 21:51:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.059 0.955 0.963 2009-May-17 21:51:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.980 0.908 0.950 1.050 2009-May-17 21:51:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.111 0.927 0.136 2009-May-17 21:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.082 (still bad) 2009-May-17 21:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.082 (still bad) 2009-May-17 21:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.082 (still bad) 2009-May-17 21:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.085 (still bad) 2009-May-17 21:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2009-May-17 21:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.089 (still bad) 2009-May-17 21:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2009-May-17 21:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.082 (still bad) 2009-May-17 21:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.088 (still bad) 2009-May-17 21:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.085 (still bad) 2009-May-17 21:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.081 (still bad) 2009-May-17 21:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.082 (still bad) 2009-May-17 21:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2009-May-17 21:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2009-May-17 21:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.088 (still bad) 2009-May-17 21:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2009-May-17 21:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.082 (still bad) 2009-May-17 21:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.085 (still bad) 2009-May-17 21:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.082 (still bad) 2009-May-17 21:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.088 (still bad) 2009-May-17 21:52:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-May-17 21:52:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.866 0.784 0.974 0.949 2009-May-17 21:52:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.061 0.955 0.962 2009-May-17 21:52:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.983 0.913 0.947 1.049 2009-May-17 21:52:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.111 0.927 0.136 2009-May-17 21:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.085 (still bad) 2009-May-17 21:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.087 (still bad) 2009-May-17 21:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.087 (still bad) 2009-May-17 21:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-May-17 21:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-May-17 21:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-May-17 21:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.090 (still bad) 2009-May-17 21:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.090 (still bad) 2009-May-17 21:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.085 (still bad) 2009-May-17 21:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.086 (still bad) 2009-May-17 21:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-May-17 21:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.086 (still bad) 2009-May-17 21:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.086 (still bad) 2009-May-17 21:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.086 (still bad) 2009-May-17 21:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.087 (still bad) 2009-May-17 21:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.088 (still bad) 2009-May-17 21:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-May-17 21:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.087 (still bad) 2009-May-17 21:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.087 (still bad) 2009-May-17 21:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.087 (still bad) 2009-May-17 21:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.085 (still bad) 2009-May-17 21:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.086 (still bad) 2009-May-17 21:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.087 (still bad) 2009-May-17 21:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.089 (still bad) 2009-May-17 21:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-May-17 21:53:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-May-17 21:53:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.864 0.784 0.975 0.951 2009-May-17 21:53:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 1.065 0.953 0.962 2009-May-17 21:53:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.978 0.908 0.956 1.058 2009-May-17 21:53:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.111 0.924 0.136 2009-May-17 21:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.091 (still bad) 2009-May-17 21:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-May-17 21:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.088 (still bad) 2009-May-17 21:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.089 (still bad) 2009-May-17 21:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.088 (still bad) 2009-May-17 21:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.087 (still bad) 2009-May-17 21:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.087 (still bad) 2009-May-17 21:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.084 (still bad) 2009-May-17 21:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.087 (still bad) 2009-May-17 21:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.083 (still bad) 2009-May-17 21:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.079 (still bad) 2009-May-17 21:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.087 (still bad) 2009-May-17 21:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:54:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:54:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.865 0.787 0.986 0.964 2009-May-17 21:54:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.064 0.956 0.965 2009-May-17 21:54:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.979 0.912 0.949 1.047 2009-May-17 21:54:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.110 0.926 0.136 2009-May-17 21:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.088 (still bad) 2009-May-17 21:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.088 (still bad) 2009-May-17 21:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 21:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.090 (still bad) 2009-May-17 21:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.088 (still bad) 2009-May-17 21:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.088 (still bad) 2009-May-17 21:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.088 (still bad) 2009-May-17 21:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.088 (still bad) 2009-May-17 21:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.090 (still bad) 2009-May-17 21:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.089 (still bad) 2009-May-17 21:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.090 (still bad) 2009-May-17 21:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.091 (still bad) 2009-May-17 21:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 21:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.087 (still bad) 2009-May-17 21:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.089 (still bad) 2009-May-17 21:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.089 (still bad) 2009-May-17 21:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.082 (still bad) 2009-May-17 21:55:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:55:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.864 0.789 0.981 0.958 2009-May-17 21:55:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.062 0.956 0.963 2009-May-17 21:55:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.984 0.917 0.949 1.050 2009-May-17 21:55:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.070 0.110 0.928 0.136 2009-May-17 21:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-May-17 21:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.088 (still bad) 2009-May-17 21:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.091 (still bad) 2009-May-17 21:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.094 (still bad) 2009-May-17 21:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.087 (still bad) 2009-May-17 21:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 21:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.084 (still bad) 2009-May-17 21:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-May-17 21:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.087 (still bad) 2009-May-17 21:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.087 (still bad) 2009-May-17 21:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.087 (still bad) 2009-May-17 21:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.087 (still bad) 2009-May-17 21:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.089 (still bad) 2009-May-17 21:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.092 (still bad) 2009-May-17 21:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.083 (still bad) 2009-May-17 21:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.087 (still bad) 2009-May-17 21:56:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:56:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.864 0.791 0.977 0.955 2009-May-17 21:56:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.065 0.956 0.966 2009-May-17 21:56:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.985 0.913 0.948 1.050 2009-May-17 21:56:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.071 0.110 0.929 0.136 2009-May-17 21:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.087 (still bad) 2009-May-17 21:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-May-17 21:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.087 (still bad) 2009-May-17 21:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.085 (still bad) 2009-May-17 21:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.087 (still bad) 2009-May-17 21:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.087 (still bad) 2009-May-17 21:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.088 (still bad) 2009-May-17 21:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.089 (still bad) 2009-May-17 21:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:57:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 21:57:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-17 21:57:01 LOG5 end_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2009-May-17 21:57:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-17 21:57:01 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2009-May-17 21:57:01 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-May-17 21:57:01 LOG5 finish_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2009-May-17 21:57:01 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-May-17 21:57:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-17 21:57:01 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-May-17 21:57:01 LOG5 end_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2009-May-17 21:57:01 COMMAND run_command_line: EXECUTING command 40: 'ENDIF' 2009-May-17 21:57:01 COMMAND run_command_line: EXECUTING command 43: 'IF LSTSLEW(AGESVC1B_p3_066) < 131529 THEN' 2009-May-17 21:57:02 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1B_p3_066) < 131529 2009-May-17 21:57:02 INFO5 is_if_valid: Condition parsed as: 13.246162 < 13.258055555555556 2009-May-17 21:57:02 COMMAND run_command_line: EXECUTING command 44: 'FIXEDDRIFT az=46.89 alfaangle=-20.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p3_066 ra=122900.00 dec=72230.00' 2009-May-17 21:57:02 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-May-17 21:57:02 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-17 21:57:02 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 46.89 -20.8 hcorcal 5 tracking no first 1 AGESVC1B_p3_066 122900.00 72230.00 J 8500.0 Heliocentric velocity(optical)' 2009-May-17 21:57:02 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-May-17 21:57:02 LOG5 begin_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2009-May-17 21:57:02 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1B_p3_064' 2009-May-17 21:57:02 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-May-17 21:57:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p3_066} 2009-May-17 21:57:02 INFO3 fixed_driftmap: Sending telescope to Az = 46.89 and ZA = 15.72 2009-May-17 21:57:02 LOG3 track_source: Calling 'track_source AGESVC1B_p3_066 46.89 15.7151359229 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-17 21:57:02 START begin_task: Starting task 'sending tracking commands' 2009-May-17 21:57:02 LOG5 begin_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2009-May-17 21:57:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_066} INFO {Slewing to source 'AGESVC1B_p3_066' ...} 2009-May-17 21:57:02 INFO1 track_source: Starting to track AGESVC1B_p3_066 2009-May-17 21:57:02 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_066" 2009-May-17 21:57:02 LOG3 vw_send: To DATATAKING: set ra 46.89 2009-May-17 21:57:02 LOG3 vw_send: To DATATAKING: set dec 15.7151359229 2009-May-17 21:57:02 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-17 21:57:02 LOG3 vw_send: To DATATAKING: pnt tr 46.89 15.7151359229 -CF 2009-May-17 21:57:02 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-17 21:57:02 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-17 21:57:02 LOG5 finish_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2009-May-17 21:57:02 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-17 21:57:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:57:02 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-17 21:57:02 LOG5 end_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2009-May-17 21:57:02 START begin_task: Starting task 'rotate ALFA to -20.8 degrees' 2009-May-17 21:57:02 LOG5 begin_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2009-May-17 21:57:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -20.8 degrees ...} 2009-May-17 21:57:03 INFO2 rotate_alfa: ALFA commanded to -20.8 degrees 2009-May-17 21:57:03 LOG3 sock_errsend: To ALFAMOTOR: POSITION -20.8 REPLY 2009-May-17 21:57:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-May-17 21:57:03 START begin_task: Starting task 'waiting on ALFA rotation' 2009-May-17 21:57:03 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2009-May-17 21:57:03 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_066" 2009-May-17 21:57:03 LOG4 got_cormsg: From DATATAKING: set ra 46.89 2009-May-17 21:57:03 LOG4 got_cormsg: From DATATAKING: set dec 15.7151359229 2009-May-17 21:57:03 LOG4 got_cormsg: From DATATAKING: vw% 46.89 2009-May-17 21:57:03 LOG4 got_cormsg: From DATATAKING: vw% 15.7151359229 2009-May-17 21:57:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:57:03 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-17 21:57:03 LOG4 got_cormsg: From DATATAKING: pnt tr 46.89 15.7151359229 -CF 2009-May-17 21:57:03 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-17 21:57:03 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-17 21:57:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.086 (still bad) 2009-May-17 21:57:13 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-May-17 21:57:13 INFO3 alfa_motor: ALFA rotator in-position -20.80 degrees 2009-May-17 21:57:13 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-May-17 21:57:13 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2009-May-17 21:57:13 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-17 21:57:13 STOP finish_task: Finishing task 'rotate ALFA to -20.8 degrees' 2009-May-17 21:57:13 LOG5 finish_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2009-May-17 21:57:13 INFO2 finish_task: DONE finished configuration: rotating ALFA to -20.8 degrees 2009-May-17 21:57:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:57:13 STOP end_task: Finishing task 'rotate ALFA to -20.8 degrees' with status 'OK' 2009-May-17 21:57:13 LOG5 end_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2009-May-17 21:57:13 START begin_task: Starting task 'waiting on telescope' 2009-May-17 21:57:13 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2009-May-17 21:57:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-17 21:57:13 LOG3 waittrk: Start waittrk 5 2009-May-17 21:57:13 START begin_task: Starting task 'waiting on telescope movement' 2009-May-17 21:57:13 LOG5 begin_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2009-May-17 21:57:18 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-17 21:57:18 LOG5 end_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2009-May-17 21:57:18 START begin_task: Starting task 'waiting on telescope on source' 2009-May-17 21:57:18 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2009-May-17 21:58:32 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-17 21:58:32 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2009-May-17 21:58:32 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-17 21:58:32 INFO2 waittrk: Now tracking AGESVC1B_p3_066 2009-May-17 21:58:32 LOG4 waittrk: Current telescope position: Az = 406.66 ZA = 15.70 2009-May-17 21:58:32 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-17 21:58:32 LOG5 finish_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2009-May-17 21:58:32 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-17 21:58:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:58:32 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-17 21:58:32 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2009-May-17 21:58:32 START begin_task: Starting task 'selecting calibration type' 2009-May-17 21:58:32 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2009-May-17 21:58:32 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-17 21:58:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-17 21:58:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-17 21:58:32 START begin_task: Starting task 'waiting on setcal' 2009-May-17 21:58:32 LOG5 begin_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2009-May-17 21:58:32 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-17 21:58:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-17 21:58:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:58:33 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-17 21:58:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-17 21:58:33 LOG5 end_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2009-May-17 21:58:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-17 21:58:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 21:58:33 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-17 21:58:33 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 21:58:33 LOG5 begin_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2009-May-17 21:58:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:58:33 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 21:58:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 21:58:33 LOG5 end_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2009-May-17 21:58:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 21:58:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-17 21:58:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 21:58:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-17 21:58:33 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 21:58:33 LOG5 begin_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2009-May-17 21:58:33 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 21:58:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 21:58:33 LOG5 end_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2009-May-17 21:58:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 21:58:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-17 21:58:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-17 21:58:33 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2009-May-17 21:58:33 LOG5 dopset_later: Calling 'dopset_later 23.688805918759076' 2009-May-17 21:58:33 INFO3 dopset_later: Setting Doppler correction for 21:58:57 (23.7 seconds from now) 2009-May-17 21:58:33 LOG5 antvel: Calling 'antvel 46.890000 15.715136 F 23.688805918759076' 2009-May-17 21:58:33 LOG2 antvel: Transforming current Az = 46.89 ZA = 15.72 to apparent RA = 12:29:30.2 Dec = +07:19:15.4 2009-May-17 21:58:33 LOG2 antvel: Parameters to Doppler: Heliocentric 93537 2009 137 0.0 2009-May-17 21:58:33 INFO5 antvel: Computed antenna velocity: +23.18463 km/s 2009-May-17 21:58:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=23.184628983300001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-May-17 21:58:33 INFO4 dopset_gen: New sky frequencies: 1381.136618 1381.136618 1381.136618 1381.136618 1381.136618 1381.136618 1381.136618 1381.136618 1381.136618 2009-May-17 21:58:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.136618 sky0=1381.136618 sky1=1381.136618 sky2=1381.136618 sky3=1381.136618 sky4=1381.136618 sky5=1381.136618 sky6=1381.136618 sky7=1381.136618 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 21:58:33 LOG2 dopset_gen: Result from 'sky2syn': 1631.136618 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 21:58:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631136618.0} 2009-May-17 21:58:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 21:58:33 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-May-17 21:58:33 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-May-17 21:58:33 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:28:40.9 Dec = +07:22:21.9 2009-May-17 21:58:33 LOG3 track_source: Calling 'track_source AGESVC1B_p3_066 122840.9 072221.9 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-17 21:58:33 START begin_task: Starting task 'sending tracking commands' 2009-May-17 21:58:33 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2009-May-17 21:58:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_066} INFO {Slewing to source 'AGESVC1B_p3_066' ...} 2009-May-17 21:58:33 INFO1 track_source: Starting to track AGESVC1B_p3_066 2009-May-17 21:58:33 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_066" 2009-May-17 21:58:33 LOG3 vw_send: To DATATAKING: set ra 122840.9 2009-May-17 21:58:33 LOG3 vw_send: To DATATAKING: set dec 072221.9 2009-May-17 21:58:33 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-17 21:58:33 LOG3 vw_send: To DATATAKING: pnt tr 122840.9 072221.9 -CJ 2009-May-17 21:58:34 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-17 21:58:34 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-17 21:58:34 LOG5 finish_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2009-May-17 21:58:34 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-17 21:58:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:58:34 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-17 21:58:34 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2009-May-17 21:58:34 START begin_task: Starting task 'waiting on telescope' 2009-May-17 21:58:34 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2009-May-17 21:58:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-17 21:58:34 LOG3 waittrk: Start waittrk 5 2009-May-17 21:58:34 START begin_task: Starting task 'waiting on telescope movement' 2009-May-17 21:58:34 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2009-May-17 21:58:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631136618.0} 2009-May-17 21:58:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 21:58:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:58:34 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_066" 2009-May-17 21:58:34 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-17 21:58:34 LOG4 got_cormsg: From DATATAKING: set ra 122840.9 2009-May-17 21:58:34 LOG4 got_cormsg: From DATATAKING: set dec 072221.9 2009-May-17 21:58:34 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-17 21:58:34 LOG4 got_cormsg: From DATATAKING: pnt tr 122840.9 072221.9 -CJ 2009-May-17 21:58:34 LOG4 got_cormsg: From DATATAKING: 122840.9 2009-May-17 21:58:34 LOG4 got_cormsg: From DATATAKING: vw% 072221.9 2009-May-17 21:58:34 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2009-May-17 21:58:34 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-17 21:58:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:58:39 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-17 21:58:39 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2009-May-17 21:58:39 START begin_task: Starting task 'waiting on telescope on source' 2009-May-17 21:58:39 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2009-May-17 21:58:42 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-17 21:58:42 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2009-May-17 21:58:42 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-17 21:58:42 INFO2 waittrk: Now tracking AGESVC1B_p3_066 2009-May-17 21:58:42 LOG4 waittrk: Current telescope position: Az = 406.71 ZA = 15.72 2009-May-17 21:58:42 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-17 21:58:42 LOG5 finish_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2009-May-17 21:58:42 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-17 21:58:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:58:42 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-17 21:58:42 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2009-May-17 21:58:42 START begin_task: Starting task 'adjusting WAPP power' 2009-May-17 21:58:42 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2009-May-17 21:58:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-May-17 21:58:42 INFO2 adjust_power: Starting to adjust WAPP power 2009-May-17 21:58:42 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-May-17 21:58:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-May-17 21:58:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-17 21:58:42 START begin_task: Starting task 'waiting on adjpwrif2' 2009-May-17 21:58:42 LOG5 begin_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2009-May-17 21:58:42 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-May-17 21:58:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-17 21:58:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:58:45 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-17 21:58:45 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-May-17 21:58:45 LOG5 end_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2009-May-17 21:58:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-May-17 21:58:45 START begin_task: Starting task 'adjusting WAPP power' 2009-May-17 21:58:45 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2009-May-17 21:58:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-May-17 21:58:45 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 21:58:45 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 21:58:45 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 21:58:45 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 21:58:45 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-May-17 21:58:45 LOG5 begin_task: Level: (5) ID = <10207> Status = 0 0 0 0 ok 2009-May-17 21:58:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-May-17 21:58:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:58:45 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 7 dB 2009-May-17 21:58:45 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 4 dB 2009-May-17 21:58:45 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 7 5 dB --- beam 3: 4 3 dB 2009-May-17 21:58:45 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 4 0 dB 2009-May-17 21:58:46 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-May-17 21:58:46 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-May-17 21:58:46 LOG5 end_task: Level: (5) ID = <10207> Status = 0 0 0 0 ok 2009-May-17 21:58:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.894 1.009 ALFA beam 1: 0.989 0.951 2009-May-17 21:58:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.918 0.881 ALFA beam 3: 1.018 1.022 2009-May-17 21:58:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.030 0.948 ALFA beam 5: 0.982 1.098 2009-May-17 21:58:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.112 0.110 ALFA beam 7: 0.967 0.135 2009-May-17 21:58:46 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-17 21:58:46 LOG5 finish_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2009-May-17 21:58:46 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-May-17 21:58:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:58:46 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-17 21:58:46 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2009-May-17 21:58:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-17 21:58:46 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-17 21:58:46 LOG5 finish_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2009-May-17 21:58:46 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-May-17 21:58:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:58:46 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-17 21:58:46 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2009-May-17 21:58:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-May-17 21:58:46 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-May-17 21:58:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-May-17 21:58:46 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-May-17 21:58:46 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-May-17 21:58:46 START begin_task: Starting task 'WAPP calibration' 2009-May-17 21:58:46 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2009-May-17 21:58:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-May-17 21:58:46 START begin_task: Starting task 'selecting calibration type' 2009-May-17 21:58:46 LOG5 begin_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2009-May-17 21:58:46 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-17 21:58:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-17 21:58:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-17 21:58:46 START begin_task: Starting task 'waiting on setcal' 2009-May-17 21:58:46 LOG5 begin_task: Level: (5) ID = <10210> Status = 0 0 0 0 ok 2009-May-17 21:58:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-May-17 21:58:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-17 21:58:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-17 21:58:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:58:46 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-17 21:58:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-17 21:58:46 LOG5 end_task: Level: (5) ID = <10210> Status = 0 0 0 0 ok 2009-May-17 21:58:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-17 21:58:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 21:58:46 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-17 21:58:46 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 21:58:46 LOG5 begin_task: Level: (5) ID = <10211> Status = 0 0 0 0 ok 2009-May-17 21:58:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:58:46 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 21:58:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 21:58:46 LOG5 end_task: Level: (5) ID = <10211> Status = 0 0 0 0 ok 2009-May-17 21:58:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 21:58:46 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-17 21:58:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 21:58:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-17 21:58:46 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 21:58:46 LOG5 begin_task: Level: (5) ID = <10212> Status = 0 0 0 0 ok 2009-May-17 21:58:46 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 21:58:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 21:58:46 LOG5 end_task: Level: (5) ID = <10212> Status = 0 0 0 0 ok 2009-May-17 21:58:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 21:58:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-17 21:58:47 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-17 21:58:47 LOG5 end_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2009-May-17 21:58:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-May-17 21:58:47 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-May-17 21:58:47 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-May-17 21:58:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-17 21:58:47 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2009-May-17 21:58:47 NOTE WAPPDATA-new_file: New FITS file: wapp.20090517.a2048.0005.fits 2009-May-17 21:58:47 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-17 21:58:47 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090517.a2048.0005.fits} 2009-May-17 21:58:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-May-17 21:58:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-17 21:58:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-17 21:58:47 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2009-May-17 21:58:47 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-May-17 21:58:47 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-May-17 21:58:47 START begin_task: Starting task 'WAPP spectral observation' 2009-May-17 21:58:47 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2009-May-17 21:58:47 LOG5 log_alfabeam: Parameters: 12.478027777777775 7.3727499999999981 13.255408 2009.3775929094734 -20.800095 2009-May-17 21:58:47 LOG4 log_alfabeam: ALFABEAM 0 12.478027777777783 7.372749999999992 2009-May-17 21:58:47 LOG4 log_alfabeam: ALFABEAM 1 12.477820440335327 7.470382564327924 2009-May-17 21:58:47 LOG4 log_alfabeam: ALFABEAM 2 12.472143708343763 7.405797511827642 2009-May-17 21:58:47 LOG4 log_alfabeam: ALFABEAM 3 12.472368433890537 7.307838650720214 2009-May-17 21:58:47 LOG4 log_alfabeam: ALFABEAM 4 12.478278017800756 7.274925404411928 2009-May-17 21:58:47 LOG4 log_alfabeam: ALFABEAM 5 12.483913003960847 7.340288521425332 2009-May-17 21:58:47 LOG4 log_alfabeam: ALFABEAM 6 12.483680256128793 7.437788162272325 2009-May-17 21:58:47 INFO2 take_data: Starting WAPP scan: 913700215 2009-May-17 21:58:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-May-17 21:58:47 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-17 21:58:47 LOG5 begin_task: Level: (5) ID = <10215> Status = 0 0 0 0 ok 2009-May-17 21:58:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 21:58:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7128.00 2009-May-17 21:58:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:58:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.894 1.009 0.989 0.951 2009-May-17 21:58:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 0.881 1.018 1.022 2009-May-17 21:58:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.030 0.948 0.982 1.098 2009-May-17 21:58:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 0.110 0.967 0.135 2009-May-17 21:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.136618 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 21:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.136618 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 21:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.136618 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 21:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.136618 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 21:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.136618 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 21:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.136618 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 21:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.136618 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 21:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.136618 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 21:58:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.136618 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 21:58:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 21:58:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-17 21:58:53 LOG5 end_task: Level: (5) ID = <10215> Status = 0 0 0 0 ok 2009-May-17 21:58:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-17 21:58:53 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2009-May-17 21:58:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-May-17 21:58:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-17 21:58:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-17 21:58:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-17 21:58:53 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2009-May-17 21:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.517 (still bad) 2009-May-17 21:58:53 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-17 21:58:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-17 21:58:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-17 21:58:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-17 21:58:53 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2009-May-17 21:58:53 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-May-17 21:58:53 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-May-17 21:58:53 START begin_task: Starting task 'WAPP spectral observation' 2009-May-17 21:58:53 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2009-May-17 21:58:53 LOG5 log_alfabeam: Parameters: 12.478027777777775 7.3727499999999981 13.257358 2009.37759313129 -20.800095 2009-May-17 21:58:53 LOG4 log_alfabeam: ALFABEAM 0 12.478027777777774 7.372749999999987 2009-May-17 21:58:53 LOG4 log_alfabeam: ALFABEAM 1 12.477828395422510 7.470386375780630 2009-May-17 21:58:53 LOG4 log_alfabeam: ALFABEAM 2 12.472146412572013 7.405903536624612 2009-May-17 21:58:53 LOG4 log_alfabeam: ALFABEAM 3 12.472363136931428 7.307940994406784 2009-May-17 21:58:53 LOG4 log_alfabeam: ALFABEAM 4 12.478269992214669 7.274921078261791 2009-May-17 21:58:53 LOG4 log_alfabeam: ALFABEAM 5 12.483910343811848 7.340181657190822 2009-May-17 21:58:53 LOG4 log_alfabeam: ALFABEAM 6 12.483685575253979 7.437685748857016 2009-May-17 21:58:53 INFO2 take_data: Starting WAPP scan: 913700216 2009-May-17 21:58:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-May-17 21:58:54 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-17 21:58:54 LOG5 begin_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2009-May-17 21:58:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 21:58:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7135.00 2009-May-17 21:59:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.136618 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 21:59:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.136618 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 21:59:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.136618 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 21:59:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.136618 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 21:59:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.136618 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 21:59:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.136618 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 21:59:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.136618 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 21:59:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.136618 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 21:59:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.136618 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 21:59:00 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-May-17 21:59:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 21:59:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-17 21:59:00 LOG5 end_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2009-May-17 21:59:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-17 21:59:00 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2009-May-17 21:59:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-17 21:59:00 STOP finish_task: Finishing task 'WAPP calibration' 2009-May-17 21:59:00 LOG5 finish_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2009-May-17 21:59:00 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-May-17 21:59:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:59:00 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-May-17 21:59:00 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2009-May-17 21:59:00 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-May-17 21:59:00 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 46.89 and ZA = 15.72 2009-May-17 21:59:00 LOG3 track_source: Calling 'track_source AGESVC1B_p3_066 46.89 15.7151359229 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-May-17 21:59:00 START begin_task: Starting task 'sending tracking commands' 2009-May-17 21:59:00 LOG5 begin_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2009-May-17 21:59:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p3_066} INFO {Slewing to source 'AGESVC1B_p3_066' ...} 2009-May-17 21:59:00 INFO1 track_source: Starting to track AGESVC1B_p3_066 2009-May-17 21:59:00 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p3_066" 2009-May-17 21:59:00 LOG3 vw_send: To DATATAKING: set ra 46.89 2009-May-17 21:59:00 LOG3 vw_send: To DATATAKING: set dec 15.7151359229 2009-May-17 21:59:00 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-17 21:59:00 LOG3 vw_send: To DATATAKING: pnt tr 46.89 15.7151359229 -CF 2009-May-17 21:59:00 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-May-17 21:59:00 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-17 21:59:00 LOG5 finish_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2009-May-17 21:59:00 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-17 21:59:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 21:59:01 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-17 21:59:01 LOG5 end_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2009-May-17 21:59:01 LOG1 fixed_driftmap: Parameters: HA = +00:45:59.9 Start = 13:15:30.2 LST = 13:15:33.5 diff = -3.3 secs 2009-May-17 21:59:01 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2009-May-17 21:59:01 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-May-17 21:59:01 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-May-17 21:59:01 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-May-17 21:59:01 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-May-17 21:59:01 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-May-17 21:59:01 START begin_task: Starting task 'WAPP spectral observation' 2009-May-17 21:59:01 LOG5 begin_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2009-May-17 21:59:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-May-17 21:59:01 INFO2 take_data: Starting WAPP scan: 913700217 2009-May-17 21:59:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-May-17 21:59:01 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-17 21:59:01 LOG5 begin_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2009-May-17 21:59:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 21:59:01 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p3_066" 2009-May-17 21:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 21:59:01 LOG4 got_cormsg: From DATATAKING: set ra 46.89 2009-May-17 21:59:01 LOG4 got_cormsg: From DATATAKING: set dec 15.7151359229 2009-May-17 21:59:01 LOG4 got_cormsg: From DATATAKING: vw% 46.89 2009-May-17 21:59:01 LOG4 got_cormsg: From DATATAKING: vw% 15.7151359229 2009-May-17 21:59:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:59:01 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-17 21:59:01 LOG4 got_cormsg: From DATATAKING: pnt tr 46.89 15.7151359229 -CF 2009-May-17 21:59:01 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-May-17 21:59:01 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-17 21:59:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 21:59:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7142.00 2009-May-17 21:59:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.136618 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 21:59:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.136618 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 21:59:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.136618 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 21:59:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.136618 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 21:59:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.136618 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 21:59:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.136618 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 21:59:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.136618 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 21:59:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.136618 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 21:59:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.136618 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 21:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 21:59:05 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2009-May-17 21:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 21:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 21:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 21:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 21:59:12 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2009-May-17 21:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 21:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 21:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 21:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 21:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 21:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 21:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 21:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 21:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 21:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 21:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 21:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 21:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 21:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 21:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 21:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 21:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 21:59:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 21:59:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.888 1.013 0.987 0.953 2009-May-17 21:59:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.891 0.856 1.016 1.018 2009-May-17 21:59:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.033 0.953 0.985 1.094 2009-May-17 21:59:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.110 0.963 0.136 2009-May-17 21:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 21:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 21:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 21:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 21:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:00:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 22:00:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.890 1.012 0.989 0.954 2009-May-17 22:00:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.890 0.857 1.017 1.022 2009-May-17 22:00:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.041 0.962 0.987 1.102 2009-May-17 22:00:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.114 0.110 0.968 0.136 2009-May-17 22:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 22:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 22:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 22:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-May-17 22:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 22:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 22:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 22:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:01:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 22:01:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.887 1.009 0.990 0.955 2009-May-17 22:01:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.896 0.859 1.018 1.021 2009-May-17 22:01:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.032 0.952 0.985 1.099 2009-May-17 22:01:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 0.110 0.965 0.136 2009-May-17 22:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-May-17 22:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-May-17 22:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-May-17 22:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-May-17 22:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 22:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-May-17 22:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:02:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 22:02:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.885 1.007 0.986 0.950 2009-May-17 22:02:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.892 0.852 1.017 1.023 2009-May-17 22:02:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.021 0.945 0.981 1.095 2009-May-17 22:02:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 0.110 0.962 0.136 2009-May-17 22:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-May-17 22:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-May-17 22:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 22:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-May-17 22:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:03:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 22:03:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.882 1.003 0.984 0.950 2009-May-17 22:03:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.891 0.849 1.016 1.021 2009-May-17 22:03:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.019 0.942 0.981 1.091 2009-May-17 22:03:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 0.110 0.962 0.136 2009-May-17 22:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:04:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 22:04:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.883 1.002 0.984 0.950 2009-May-17 22:04:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.889 0.848 1.015 1.020 2009-May-17 22:04:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.015 0.941 0.980 1.097 2009-May-17 22:04:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 0.110 0.963 0.136 2009-May-17 22:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 22:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 22:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-May-17 22:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 22:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-May-17 22:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 22:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 22:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-May-17 22:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 22:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 22:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:05:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 22:05:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.884 1.008 0.995 0.959 2009-May-17 22:05:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.894 0.849 1.019 1.022 2009-May-17 22:05:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.016 0.944 0.985 1.097 2009-May-17 22:05:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.110 0.965 0.136 2009-May-17 22:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 22:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 22:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:07:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 22:07:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.881 1.000 0.984 0.949 2009-May-17 22:07:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.892 0.846 1.015 1.018 2009-May-17 22:07:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.013 0.937 0.980 1.093 2009-May-17 22:07:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 0.110 0.963 0.136 2009-May-17 22:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 22:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 22:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 22:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 22:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 22:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.125 (still bad) 2009-May-17 22:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 22:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 22:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 22:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-May-17 22:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-May-17 22:08:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 22:08:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.940 1.072 0.988 0.952 2009-May-17 22:08:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.893 0.847 1.015 1.021 2009-May-17 22:08:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.014 0.940 0.980 1.090 2009-May-17 22:08:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 0.110 0.961 0.136 2009-May-17 22:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-May-17 22:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-May-17 22:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-May-17 22:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-May-17 22:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-May-17 22:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-May-17 22:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 22:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-May-17 22:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-May-17 22:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 22:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2009-May-17 22:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-May-17 22:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2009-May-17 22:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-May-17 22:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-May-17 22:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-May-17 22:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-May-17 22:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-May-17 22:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-May-17 22:09:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-May-17 22:09:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.881 1.002 0.985 0.952 2009-May-17 22:09:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.892 0.848 1.017 1.026 2009-May-17 22:09:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.018 0.941 0.982 1.096 2009-May-17 22:09:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 0.111 0.962 0.136 2009-May-17 22:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-May-17 22:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-May-17 22:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2009-May-17 22:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-May-17 22:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-May-17 22:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-May-17 22:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-May-17 22:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-May-17 22:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-May-17 22:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-May-17 22:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2009-May-17 22:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-May-17 22:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2009-May-17 22:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-May-17 22:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-May-17 22:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-May-17 22:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-May-17 22:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-May-17 22:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2009-May-17 22:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-May-17 22:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2009-May-17 22:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad) 2009-May-17 22:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-May-17 22:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2009-May-17 22:10:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-May-17 22:10:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.888 1.005 0.985 0.953 2009-May-17 22:10:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.895 0.853 1.021 1.027 2009-May-17 22:10:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.021 0.944 0.984 1.102 2009-May-17 22:10:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.111 0.963 0.136 2009-May-17 22:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2009-May-17 22:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2009-May-17 22:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-May-17 22:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad) 2009-May-17 22:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2009-May-17 22:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2009-May-17 22:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-May-17 22:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad) 2009-May-17 22:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-May-17 22:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2009-May-17 22:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad) 2009-May-17 22:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2009-May-17 22:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2009-May-17 22:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-May-17 22:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2009-May-17 22:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-May-17 22:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2009-May-17 22:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad) 2009-May-17 22:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2009-May-17 22:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2009-May-17 22:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2009-May-17 22:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2009-May-17 22:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2009-May-17 22:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-May-17 22:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-May-17 22:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-May-17 22:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-May-17 22:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-May-17 22:11:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-May-17 22:11:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.890 1.009 0.986 0.952 2009-May-17 22:11:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.894 0.852 1.018 1.026 2009-May-17 22:11:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.023 0.946 0.992 1.107 2009-May-17 22:11:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 0.111 0.963 0.136 2009-May-17 22:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-May-17 22:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-May-17 22:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-May-17 22:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-May-17 22:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-May-17 22:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-May-17 22:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2009-May-17 22:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-May-17 22:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-May-17 22:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-May-17 22:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-May-17 22:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-May-17 22:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-May-17 22:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-May-17 22:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-May-17 22:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2009-May-17 22:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-May-17 22:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-May-17 22:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-May-17 22:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-May-17 22:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-May-17 22:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-May-17 22:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:12:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-May-17 22:12:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.890 1.009 0.991 0.956 2009-May-17 22:12:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.893 0.851 1.021 1.027 2009-May-17 22:12:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.025 0.947 0.984 1.092 2009-May-17 22:12:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 0.111 0.962 0.136 2009-May-17 22:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2009-May-17 22:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-May-17 22:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-May-17 22:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2009-May-17 22:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-May-17 22:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2009-May-17 22:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2009-May-17 22:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-May-17 22:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-May-17 22:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-May-17 22:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-May-17 22:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-May-17 22:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-May-17 22:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-May-17 22:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-May-17 22:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-May-17 22:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-May-17 22:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-May-17 22:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-May-17 22:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-May-17 22:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-May-17 22:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-May-17 22:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-May-17 22:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-May-17 22:13:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-May-17 22:13:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.890 1.010 0.986 0.951 2009-May-17 22:13:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.891 0.853 1.021 1.027 2009-May-17 22:13:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.027 0.949 0.988 1.094 2009-May-17 22:13:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 0.111 0.963 0.136 2009-May-17 22:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-May-17 22:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-May-17 22:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-May-17 22:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-May-17 22:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-May-17 22:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-May-17 22:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-May-17 22:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-May-17 22:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-May-17 22:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-May-17 22:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-May-17 22:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-May-17 22:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-May-17 22:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-May-17 22:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-May-17 22:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-May-17 22:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-May-17 22:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-May-17 22:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-May-17 22:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-May-17 22:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-May-17 22:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-May-17 22:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-May-17 22:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-May-17 22:14:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-May-17 22:14:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.893 1.014 0.989 0.953 2009-May-17 22:14:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.895 0.855 1.024 1.026 2009-May-17 22:14:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.029 0.951 0.993 1.100 2009-May-17 22:14:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.114 0.111 0.967 0.136 2009-May-17 22:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-May-17 22:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-May-17 22:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-May-17 22:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-May-17 22:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-May-17 22:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-May-17 22:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-May-17 22:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-May-17 22:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-May-17 22:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-May-17 22:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-May-17 22:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-May-17 22:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-May-17 22:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2009-May-17 22:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 22:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-May-17 22:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-May-17 22:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-May-17 22:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 22:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2009-May-17 22:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:15:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 22:15:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.890 1.011 0.995 0.956 2009-May-17 22:15:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.896 0.856 1.023 1.025 2009-May-17 22:15:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.029 0.953 0.990 1.098 2009-May-17 22:15:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.111 0.110 0.964 0.136 2009-May-17 22:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-May-17 22:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-May-17 22:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 22:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 22:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.136 (still bad) 2009-May-17 22:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-May-17 22:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-May-17 22:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-May-17 22:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 22:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 22:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 22:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 22:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 22:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 22:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 22:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 22:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 22:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:16:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 22:16:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.891 1.016 0.989 0.955 2009-May-17 22:16:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 0.861 1.025 1.029 2009-May-17 22:16:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.028 0.954 0.987 1.097 2009-May-17 22:16:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 0.110 0.965 0.136 2009-May-17 22:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 22:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 22:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 22:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 22:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 22:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 22:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 22:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 22:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 22:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 22:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 22:17:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 22:17:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.892 1.013 0.993 0.957 2009-May-17 22:17:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.896 0.859 1.023 1.025 2009-May-17 22:17:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.029 0.955 0.991 1.100 2009-May-17 22:17:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.114 0.110 0.968 0.136 2009-May-17 22:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-May-17 22:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 22:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:18:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 22:18:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.891 1.016 0.993 0.957 2009-May-17 22:18:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.897 0.860 1.022 1.025 2009-May-17 22:18:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.029 0.954 0.989 1.097 2009-May-17 22:18:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 0.110 0.965 0.136 2009-May-17 22:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-May-17 22:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 22:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 22:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 22:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-May-17 22:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-May-17 22:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 22:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 22:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 22:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-May-17 22:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-May-17 22:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-May-17 22:19:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:19:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-17 22:19:02 LOG5 end_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2009-May-17 22:19:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-17 22:19:02 LOG5 end_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2009-May-17 22:19:02 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-May-17 22:19:02 LOG5 finish_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2009-May-17 22:19:02 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-May-17 22:19:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-17 22:19:02 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-May-17 22:19:02 LOG5 end_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2009-May-17 22:19:02 COMMAND run_command_line: EXECUTING command 47: 'ENDIF' 2009-May-17 22:19:02 NOTE run_command_file: DONE with command file processing 2009-May-17 22:19:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-May-17 22:19:02 STOP finish_task: Finishing task 'running command file '090517.cmd'' 2009-May-17 22:19:02 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-May-17 22:19:02 DONE finish_task: DONE finished running: command file '090517.cmd' 2009-May-17 22:19:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-17 22:19:02 END end_task: Finishing task 'running command file '090517.cmd'' with status 'OK' 2009-May-17 22:19:02 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-May-17 22:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-May-17 22:19:33 INFO1 CIMA-run_command_file: Transferring command file 'command_galfacurpos.cmd ' to executive ... 2009-May-17 22:19:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 7 {LOAD togs_ages.conf} 2009-May-17 22:19:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 8 {TRACKCURPOS} 2009-May-17 22:19:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 9 {ALFAANGLE 19} 2009-May-17 22:19:33 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2009-May-17 22:19:33 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-May-17 22:19:33 LOG4 exec_msg: From OBSERVER: run_command_file command_galfacurpos.cmd 1 1 4 2009-May-17 22:19:33 LOG4 run_command_file: Calling 'run_command_file command_galfacurpos.cmd 1 1 4' 2009-May-17 22:19:33 BEGIN begin_task: Starting task 'running command file 'command_galfacurpos.cmd'' 2009-May-17 22:19:33 LOG5 begin_task: Level: (1) ID = <10222> Status = 0 0 0 0 ok 2009-May-17 22:19:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfacurpos.cmd' ...} 2009-May-17 22:19:33 NOTE run_command_file: Starting execution of command file 'command_galfacurpos.cmd' from line 1 2009-May-17 22:19:33 COMMAND run_command_line: EXECUTING command 7: 'LOAD togs_ages.conf' 2009-May-17 22:19:33 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-May-17 22:19:33 NOTE CIMA-check_config_file: File 'togs_ages.conf' contains a observing mode set-up which will be ignored! 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-17 22:19:34 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-May-17 22:19:34 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-May-17 22:19:34 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-May-17 22:19:35 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-May-17 22:19:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-May-17 22:19:36 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-17 22:19:36 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-May-17 22:19:36 LOG5 begin_task: Level: (2) ID = <10223> Status = 0 0 0 0 ok 2009-May-17 22:19:36 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-May-17 22:19:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-May-17 22:19:36 LOG1 config_iflo: Receiver ALFA already selected 2009-May-17 22:19:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 22:19:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-17 22:19:36 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 22:19:36 LOG5 begin_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2009-May-17 22:19:36 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 22:19:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 22:19:36 LOG5 end_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2009-May-17 22:19:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 22:19:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-17 22:19:36 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-May-17 22:19:36 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-May-17 22:19:36 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-May-17 22:19:36 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-May-17 22:19:36 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-May-17 22:19:36 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-May-17 22:19:36 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-May-17 22:19:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2009-May-17 22:19:36 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-May-17 22:19:36 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-May-17 22:19:36 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-May-17 22:19:36 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-May-17 22:19:36 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-May-17 22:19:36 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-May-17 22:19:36 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-May-17 22:19:36 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-May-17 22:19:36 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-May-17 22:19:36 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-May-17 22:19:36 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-May-17 22:19:36 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-May-17 22:19:36 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-May-17 22:19:36 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-May-17 22:19:36 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-May-17 22:19:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:19:36 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-May-17 22:19:36 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-May-17 22:19:36 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-May-17 22:19:36 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-May-17 22:19:36 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-May-17 22:19:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-May-17 22:19:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-17 22:19:36 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-May-17 22:19:36 LOG5 begin_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2009-May-17 22:19:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2009-May-17 22:19:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-May-17 22:19:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:19:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-17 22:19:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:19:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:19:37 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-May-17 22:19:37 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-May-17 22:19:37 LOG5 end_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2009-May-17 22:19:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-May-17 22:19:37 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-May-17 22:19:37 LOG5 finish_task: Level: (2) ID = <10223> Status = 0 0 0 0 ok 2009-May-17 22:19:37 DONE finish_task: DONE finished configuration: IF/LO path 2009-May-17 22:19:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-17 22:19:37 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-May-17 22:19:37 LOG5 end_task: Level: (2) ID = <10223> Status = 0 0 0 0 ok 2009-May-17 22:19:37 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-May-17 22:19:37 LOG5 begin_task: Level: (2) ID = <10226> Status = 0 0 0 0 ok 2009-May-17 22:19:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-May-17 22:19:37 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-May-17 22:19:37 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-May-17 22:19:37 START begin_task: Starting task 'selecting calibration port' 2009-May-17 22:19:37 LOG5 begin_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2009-May-17 22:19:37 LOG3 vw_send: To DATATAKING: calport 3 2009-May-17 22:19:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-May-17 22:19:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-17 22:19:37 START begin_task: Starting task 'waiting on calport' 2009-May-17 22:19:37 LOG5 begin_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2009-May-17 22:19:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:19:38 LOG4 got_cormsg: From DATATAKING: calport 3 2009-May-17 22:19:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-17 22:19:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:19:38 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-17 22:19:38 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-May-17 22:19:38 LOG5 end_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2009-May-17 22:19:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-May-17 22:19:38 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-May-17 22:19:38 LOG5 end_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2009-May-17 22:19:38 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-17 22:19:38 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-17 22:19:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-17 22:19:38 LOG5 begin_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2009-May-17 22:19:38 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-17 22:19:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:19:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-17 22:19:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-17 22:19:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-17 22:19:38 LOG5 end_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2009-May-17 22:19:38 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-May-17 22:19:38 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-May-17 22:19:38 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-May-17 22:19:38 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-May-17 22:19:38 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-May-17 22:19:38 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-May-17 22:19:38 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-May-17 22:19:38 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-May-17 22:19:38 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-May-17 22:19:38 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-May-17 22:19:38 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-May-17 22:19:38 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-May-17 22:19:38 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-May-17 22:19:38 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-May-17 22:19:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-17 22:19:38 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2009-May-17 22:19:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-May-17 22:19:38 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-17 22:19:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-May-17 22:19:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-17 22:19:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-May-17 22:19:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-17 22:19:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-17 22:19:38 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2009-May-17 22:19:38 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-May-17 22:19:38 STOP finish_task: Finishing task 'configuring WAPPs' 2009-May-17 22:19:38 LOG5 finish_task: Level: (2) ID = <10226> Status = 0 0 0 0 ok 2009-May-17 22:19:38 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-May-17 22:19:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-17 22:19:38 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-May-17 22:19:38 LOG5 end_task: Level: (2) ID = <10226> Status = 0 0 0 0 ok 2009-May-17 22:19:38 COMMAND run_command_line: EXECUTING command 8: 'TRACKCURPOS' 2009-May-17 22:19:38 BEGIN begin_task: Starting task 'tracking current position' 2009-May-17 22:19:38 LOG5 begin_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2009-May-17 22:19:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2009-May-17 22:19:38 INFO1 track_current_pos: Starting to track the current commanded position RA = 12:49:45.6 and Dec = +07:22:28.0 2009-May-17 22:19:39 LOG3 track_source: Calling 'track_source Cur-pos 124945.6 072228.0 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-May-17 22:19:39 START begin_task: Starting task 'sending tracking commands' 2009-May-17 22:19:39 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2009-May-17 22:19:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2009-May-17 22:19:39 INFO1 track_source: Starting to track Cur-pos 2009-May-17 22:19:39 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2009-May-17 22:19:39 LOG3 vw_send: To DATATAKING: set ra 124945.6 2009-May-17 22:19:39 LOG3 vw_send: To DATATAKING: set dec 072228.0 2009-May-17 22:19:39 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-17 22:19:39 LOG3 vw_send: To DATATAKING: pnt tr 124945.6 072228.0 -CJ 2009-May-17 22:19:39 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-May-17 22:19:39 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-17 22:19:39 LOG5 finish_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2009-May-17 22:19:39 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-17 22:19:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 22:19:39 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-17 22:19:39 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2009-May-17 22:19:39 START begin_task: Starting task 'waiting on telescope' 2009-May-17 22:19:39 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2009-May-17 22:19:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-17 22:19:39 LOG3 waittrk: Start waittrk 5 2009-May-17 22:19:39 START begin_task: Starting task 'waiting on telescope movement' 2009-May-17 22:19:39 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2009-May-17 22:19:39 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-May-17 22:19:39 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2009-May-17 22:19:39 LOG4 got_cormsg: From DATATAKING: set ra 124945.6 2009-May-17 22:19:39 LOG4 got_cormsg: From DATATAKING: set dec 072228.0 2009-May-17 22:19:39 LOG4 got_cormsg: From DATATAKING: vw% 124945.6 2009-May-17 22:19:39 LOG4 got_cormsg: From DATATAKING: vw% 072228.0 2009-May-17 22:19:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:19:39 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-17 22:19:39 LOG4 got_cormsg: From DATATAKING: pnt tr 124945.6 072228.0 -CJ 2009-May-17 22:19:39 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-May-17 22:19:39 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-17 22:19:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:19:44 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-17 22:19:44 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2009-May-17 22:19:44 START begin_task: Starting task 'waiting on telescope on source' 2009-May-17 22:19:44 LOG5 begin_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2009-May-17 22:19:47 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-17 22:19:47 LOG5 end_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2009-May-17 22:19:47 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-17 22:19:47 INFO2 waittrk: Now tracking Cur-pos 2009-May-17 22:19:47 LOG4 waittrk: Current telescope position: Az = 406.76 ZA = 15.73 2009-May-17 22:19:47 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-17 22:19:47 LOG5 finish_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2009-May-17 22:19:47 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-17 22:19:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 22:19:47 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-17 22:19:47 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2009-May-17 22:19:47 STOP finish_task: Finishing task 'tracking current position' 2009-May-17 22:19:47 LOG5 finish_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2009-May-17 22:19:47 DONE finish_task: DONE finished tracking: current position 2009-May-17 22:19:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-17 22:19:47 END end_task: Finishing task 'tracking current position' with status 'OK' 2009-May-17 22:19:47 LOG5 end_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2009-May-17 22:19:47 COMMAND run_command_line: EXECUTING command 9: 'ALFAANGLE 19' 2009-May-17 22:19:47 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-May-17 22:19:47 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-May-17 22:19:47 LOG5 begin_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2009-May-17 22:19:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-May-17 22:19:47 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-May-17 22:19:47 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-May-17 22:19:47 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-May-17 22:19:47 START begin_task: Starting task 'waiting on ALFA rotation' 2009-May-17 22:19:47 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2009-May-17 22:20:11 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-May-17 22:20:11 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-May-17 22:20:11 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-May-17 22:20:11 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2009-May-17 22:20:11 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-17 22:20:11 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-May-17 22:20:11 LOG5 finish_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2009-May-17 22:20:11 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-May-17 22:20:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-17 22:20:11 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-May-17 22:20:11 LOG5 end_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2009-May-17 22:20:11 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2009-May-17 22:20:11 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-May-17 22:20:24 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-17 22:20:24 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2009-May-17 22:20:24 BEGIN begin_task: Starting task 'smart frequency switching' 2009-May-17 22:20:24 LOG5 begin_task: Level: (2) ID = <10238> Status = 0 0 0 0 ok 2009-May-17 22:20:24 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2009-May-17 22:20:25 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-May-17 22:20:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-May-17 22:20:25 START begin_task: Starting task 'selecting calibration type' 2009-May-17 22:20:25 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2009-May-17 22:20:25 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-17 22:20:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-17 22:20:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-17 22:20:25 START begin_task: Starting task 'waiting on setcal' 2009-May-17 22:20:25 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2009-May-17 22:20:25 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-17 22:20:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-17 22:20:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:20:25 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-17 22:20:25 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-17 22:20:25 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2009-May-17 22:20:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-17 22:20:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 22:20:25 LOG3 socket_wait: To ALFAMON: CAL HI 2009-May-17 22:20:25 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 22:20:25 LOG5 begin_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2009-May-17 22:20:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:20:25 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 22:20:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 22:20:25 LOG5 end_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2009-May-17 22:20:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 22:20:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-May-17 22:20:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-17 22:20:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-17 22:20:25 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-17 22:20:25 LOG5 begin_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2009-May-17 22:20:25 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-17 22:20:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-17 22:20:25 LOG5 end_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2009-May-17 22:20:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-17 22:20:25 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-17 22:20:25 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-17 22:20:25 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2009-May-17 22:20:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-May-17 22:20:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-May-17 22:20:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-May-17 22:20:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-May-17 22:20:25 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-May-17 22:20:25 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-May-17 22:20:25 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-May-17 22:20:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-17 22:20:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-17 22:20:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-17 22:20:25 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2009-May-17 22:20:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-May-17 22:20:25 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-17 22:20:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-17 22:20:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-17 22:20:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-17 22:20:25 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2009-May-17 22:20:25 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-May-17 22:20:25 START begin_task: Starting task 'adjusting WAPP power' 2009-May-17 22:20:25 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2009-May-17 22:20:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-May-17 22:20:25 INFO2 adjust_power: Starting to adjust WAPP power 2009-May-17 22:20:25 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-May-17 22:20:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-May-17 22:20:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-17 22:20:25 START begin_task: Starting task 'waiting on adjpwrif2' 2009-May-17 22:20:25 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2009-May-17 22:20:26 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-May-17 22:20:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-17 22:20:26 NOTE WAPPDATA-new_file: New FITS file: wapp.20090517.a2048.0006.fits 2009-May-17 22:20:26 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090517.a2048.0006.fits} 2009-May-17 22:20:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:20:28 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-17 22:20:28 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-May-17 22:20:28 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2009-May-17 22:20:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-May-17 22:20:28 START begin_task: Starting task 'adjusting WAPP power' 2009-May-17 22:20:28 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2009-May-17 22:20:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-May-17 22:20:28 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 22:20:29 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 22:20:29 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 22:20:29 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-May-17 22:20:29 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-May-17 22:20:29 LOG5 begin_task: Level: (5) ID = <10247> Status = 0 0 0 0 ok 2009-May-17 22:20:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-May-17 22:20:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:20:29 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 7 7 dB 2009-May-17 22:20:29 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 4 dB 2009-May-17 22:20:29 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 7 4 dB --- beam 3: 4 3 dB 2009-May-17 22:20:29 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 4 0 dB 2009-May-17 22:20:29 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-May-17 22:20:29 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-May-17 22:20:29 LOG5 end_task: Level: (5) ID = <10247> Status = 0 0 0 0 ok 2009-May-17 22:20:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.094 1.038 ALFA beam 1: 1.017 1.002 2009-May-17 22:20:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.894 1.112 ALFA beam 3: 0.997 1.024 2009-May-17 22:20:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.039 0.980 ALFA beam 5: 0.981 1.107 2009-May-17 22:20:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.068 0.110 ALFA beam 7: 0.925 0.136 2009-May-17 22:20:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-17 22:20:29 LOG5 finish_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2009-May-17 22:20:29 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-May-17 22:20:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 22:20:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-17 22:20:29 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2009-May-17 22:20:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-17 22:20:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-17 22:20:29 LOG5 finish_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2009-May-17 22:20:29 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-May-17 22:20:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-17 22:20:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-17 22:20:29 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2009-May-17 22:20:29 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2009-May-17 22:20:29 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2009-May-17 22:20:29 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-May-17 22:20:29 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:20:29 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37763 J 2009-May-17 22:20:29 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:20:29 LOG2 antvel: Parameters to Doppler: Topocentric 94829 2009 137 0.0 2009-May-17 22:20:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:20:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-May-17 22:20:29 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-May-17 22:20:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:20:29 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:20:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-May-17 22:20:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:20:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-17 22:20:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:20:29 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2009-May-17 22:20:29 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.618344 2009.377634199052 18.999933 2009-May-17 22:20:29 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333334 7.374444444444447 2009-May-17 22:20:29 LOG4 log_alfabeam: ALFABEAM 1 12.833472510445969 7.460904982699141 2009-May-17 22:20:29 LOG4 log_alfabeam: ALFABEAM 2 12.826879721707801 7.460045164558445 2009-May-17 22:20:29 LOG4 log_alfabeam: ALFABEAM 3 12.822720810340963 7.373779339922365 2009-May-17 22:20:29 LOG4 log_alfabeam: ALFABEAM 4 12.825207348590546 7.287830423397875 2009-May-17 22:20:29 LOG4 log_alfabeam: ALFABEAM 5 12.831825306429966 7.288905926777753 2009-May-17 22:20:29 LOG4 log_alfabeam: ALFABEAM 6 12.835931478974363 7.375713128567766 2009-May-17 22:20:29 INFO2 take_data: Starting WAPP+GALFA scan: 913700218 2009-May-17 22:20:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:20:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:20:30 LOG5 begin_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2009-May-17 22:20:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:20:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-May-17 22:20:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:20:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:20:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:20:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8431.00 2009-May-17 22:20:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:20:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:20:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:20:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:20:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:20:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:20:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:20:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:20:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:20:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-May-17 22:20:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.170 1.070 1.067 1.023 2009-May-17 22:20:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.912 1.148 1.072 1.056 2009-May-17 22:20:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 1.007 1.057 1.162 2009-May-17 22:20:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 0.111 0.951 0.137 2009-May-17 22:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.165 (still bad) 2009-May-17 22:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.170 (still bad) 2009-May-17 22:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.171 (still bad) 2009-May-17 22:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.165 (still bad) 2009-May-17 22:20:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:20:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:20:41 LOG5 end_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2009-May-17 22:20:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:20:41 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2009-May-17 22:20:41 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2009-May-17 22:20:41 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2009-May-17 22:20:41 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2009-May-17 22:20:41 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:20:41 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37763 J 2009-May-17 22:20:41 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:20:41 LOG2 antvel: Parameters to Doppler: Topocentric 94841 2009 137 0.0 2009-May-17 22:20:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:20:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2009-May-17 22:20:41 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2009-May-17 22:20:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:20:41 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:20:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2009-May-17 22:20:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:20:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-17 22:20:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:20:41 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2009-May-17 22:20:41 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.621686 2009.377634579309 18.999933 2009-May-17 22:20:41 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333338 7.374444444444443 2009-May-17 22:20:41 LOG4 log_alfabeam: ALFABEAM 1 12.833484400193203 7.460778793186283 2009-May-17 22:20:41 LOG4 log_alfabeam: ALFABEAM 2 12.826891474930591 7.460119708176489 2009-May-17 22:20:41 LOG4 log_alfabeam: ALFABEAM 3 12.822720747568415 7.373980186199825 2009-May-17 22:20:41 LOG4 log_alfabeam: ALFABEAM 4 12.825195414285883 7.287956548746845 2009-May-17 22:20:41 LOG4 log_alfabeam: ALFABEAM 5 12.831813474431231 7.288830064672578 2009-May-17 22:20:41 LOG4 log_alfabeam: ALFABEAM 6 12.835931655201360 7.375511264735065 2009-May-17 22:20:41 INFO2 take_data: Starting WAPP+GALFA scan: 913700219 2009-May-17 22:20:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:20:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:20:42 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2009-May-17 22:20:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:20:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2009-May-17 22:20:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:20:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:20:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.165 (still bad) 2009-May-17 22:20:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8443.00 2009-May-17 22:20:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:20:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:20:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:20:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:20:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:20:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:20:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:20:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:20:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 22:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-May-17 22:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 22:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-May-17 22:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 22:20:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:20:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:20:53 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2009-May-17 22:20:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:20:53 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2009-May-17 22:20:53 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2009-May-17 22:20:53 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2009-May-17 22:20:53 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2009-May-17 22:20:53 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:20:53 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37763 J 2009-May-17 22:20:53 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:20:53 LOG2 antvel: Parameters to Doppler: Topocentric 94853 2009 137 0.0 2009-May-17 22:20:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:20:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2009-May-17 22:20:53 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2009-May-17 22:20:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:20:53 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:20:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2009-May-17 22:20:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:20:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-17 22:20:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:20:53 LOG5 begin_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2009-May-17 22:20:53 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.625029 2009.377634959566 18.999933 2009-May-17 22:20:53 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333338 7.374444444444438 2009-May-17 22:20:53 LOG4 log_alfabeam: ALFABEAM 1 12.833496221515460 7.460652787085562 2009-May-17 22:20:53 LOG4 log_alfabeam: ALFABEAM 2 12.826903187696493 7.460193576435207 2009-May-17 22:20:53 LOG4 log_alfabeam: ALFABEAM 3 12.822720712493599 7.374180168373540 2009-May-17 22:20:53 LOG4 log_alfabeam: ALFABEAM 4 12.825183548552261 7.288082493915280 2009-May-17 22:20:53 LOG4 log_alfabeam: ALFABEAM 5 12.831801682825306 7.288754888409509 2009-May-17 22:20:53 LOG4 log_alfabeam: ALFABEAM 6 12.835931802981477 7.375310261531400 2009-May-17 22:20:53 INFO2 take_data: Starting WAPP+GALFA scan: 913700220 2009-May-17 22:20:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:20:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:20:54 LOG5 begin_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2009-May-17 22:20:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:20:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2009-May-17 22:20:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:20:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:20:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:20:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8455.00 2009-May-17 22:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-May-17 22:20:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:20:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:20:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:20:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:20:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:20:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:20:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:20:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:20:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-May-17 22:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2009-May-17 22:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 22:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-May-17 22:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2009-May-17 22:21:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:21:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:21:05 LOG5 end_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2009-May-17 22:21:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:21:05 LOG5 end_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2009-May-17 22:21:05 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2009-May-17 22:21:05 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2009-May-17 22:21:05 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2009-May-17 22:21:05 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:21:05 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:21:05 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:21:05 LOG2 antvel: Parameters to Doppler: Topocentric 94865 2009 137 0.0 2009-May-17 22:21:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:21:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2009-May-17 22:21:05 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2009-May-17 22:21:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:21:05 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:21:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2009-May-17 22:21:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:21:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-17 22:21:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:21:05 LOG5 begin_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2009-May-17 22:21:05 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.628371 2009.377635339823 18.999933 2009-May-17 22:21:05 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333338 7.374444444444443 2009-May-17 22:21:05 LOG4 log_alfabeam: ALFABEAM 1 12.833507967779996 7.460527042595054 2009-May-17 22:21:05 LOG4 log_alfabeam: ALFABEAM 2 12.826914853058428 7.460266731297917 2009-May-17 22:21:05 LOG4 log_alfabeam: ALFABEAM 3 12.822720704758009 7.374379170207220 2009-May-17 22:21:05 LOG4 log_alfabeam: ALFABEAM 4 12.825171758049390 7.288208180703319 2009-May-17 22:21:05 LOG4 log_alfabeam: ALFABEAM 5 12.831789938611198 7.288680436739354 2009-May-17 22:21:05 LOG4 log_alfabeam: ALFABEAM 6 12.835931922609706 7.375110235899877 2009-May-17 22:21:05 INFO2 take_data: Starting WAPP+GALFA scan: 913700221 2009-May-17 22:21:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:21:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:21:06 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2009-May-17 22:21:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:21:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2009-May-17 22:21:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:21:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:21:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:21:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8467.00 2009-May-17 22:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2009-May-17 22:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2009-May-17 22:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad) 2009-May-17 22:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2009-May-17 22:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-May-17 22:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-May-17 22:21:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:21:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:21:17 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2009-May-17 22:21:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:21:17 LOG5 end_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2009-May-17 22:21:17 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2009-May-17 22:21:17 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2009-May-17 22:21:17 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2009-May-17 22:21:17 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:21:17 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:21:17 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:21:17 LOG2 antvel: Parameters to Doppler: Topocentric 94877 2009 137 0.0 2009-May-17 22:21:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:21:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2009-May-17 22:21:17 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2009-May-17 22:21:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:21:17 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:21:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2009-May-17 22:21:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:21:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-17 22:21:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:21:17 LOG5 begin_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2009-May-17 22:21:17 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.631714 2009.3776357200802 18.999933 2009-May-17 22:21:17 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333334 7.374444444444435 2009-May-17 22:21:17 LOG4 log_alfabeam: ALFABEAM 1 12.833519646454596 7.460401487214641 2009-May-17 22:21:17 LOG4 log_alfabeam: ALFABEAM 2 12.826926478060271 7.460339222657995 2009-May-17 22:21:17 LOG4 log_alfabeam: ALFABEAM 3 12.822720723981323 7.374577314218079 2009-May-17 22:21:17 LOG4 log_alfabeam: ALFABEAM 4 12.825160035283364 7.288333681538468 2009-May-17 22:21:17 LOG4 log_alfabeam: ALFABEAM 5 12.831778234702554 7.288606658924247 2009-May-17 22:21:17 LOG4 log_alfabeam: ALFABEAM 6 12.835932014537269 7.374911064805262 2009-May-17 22:21:17 INFO2 take_data: Starting WAPP+GALFA scan: 913700222 2009-May-17 22:21:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:21:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:21:18 LOG5 begin_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2009-May-17 22:21:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:21:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2009-May-17 22:21:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:21:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:21:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:21:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8479.00 2009-May-17 22:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-May-17 22:21:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:21:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:21:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:21:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:21:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:21:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:21:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:21:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:21:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 22:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 22:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-May-17 22:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 22:21:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:21:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:21:29 LOG5 end_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2009-May-17 22:21:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:21:29 LOG5 end_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2009-May-17 22:21:29 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2009-May-17 22:21:29 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2009-May-17 22:21:29 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2009-May-17 22:21:29 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:21:29 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:21:29 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:21:29 LOG2 antvel: Parameters to Doppler: Topocentric 94889 2009 137 0.0 2009-May-17 22:21:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:21:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2009-May-17 22:21:29 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2009-May-17 22:21:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:21:29 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:21:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2009-May-17 22:21:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:21:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-17 22:21:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:21:29 LOG5 begin_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2009-May-17 22:21:29 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.635056 2009.3776361003372 18.999933 2009-May-17 22:21:29 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333334 7.374444444444438 2009-May-17 22:21:29 LOG4 log_alfabeam: ALFABEAM 1 12.833531250989049 7.460276198747469 2009-May-17 22:21:29 LOG4 log_alfabeam: ALFABEAM 2 12.826938055812446 7.460411013213961 2009-May-17 22:21:29 LOG4 log_alfabeam: ALFABEAM 3 12.822720769780435 7.374774485305246 2009-May-17 22:21:29 LOG4 log_alfabeam: ALFABEAM 4 12.825148386831135 7.288458918612586 2009-May-17 22:21:29 LOG4 log_alfabeam: ALFABEAM 5 12.831766578040831 7.288533592966938 2009-May-17 22:21:29 LOG4 log_alfabeam: ALFABEAM 6 12.835932079084756 7.374712864056281 2009-May-17 22:21:29 INFO2 take_data: Starting WAPP+GALFA scan: 913700223 2009-May-17 22:21:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:21:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:21:30 LOG5 begin_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2009-May-17 22:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad) 2009-May-17 22:21:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:21:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2009-May-17 22:21:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:21:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:21:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:21:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8491.00 2009-May-17 22:21:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:21:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:21:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:21:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:21:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:21:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:21:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:21:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:21:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 22:21:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 22:21:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.110 1.040 1.015 1.006 2009-May-17 22:21:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.897 1.115 1.006 1.032 2009-May-17 22:21:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.048 0.987 0.991 1.116 2009-May-17 22:21:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.070 0.110 0.927 0.136 2009-May-17 22:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-May-17 22:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad) 2009-May-17 22:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-May-17 22:21:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:21:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:21:41 LOG5 end_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2009-May-17 22:21:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:21:41 LOG5 end_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2009-May-17 22:21:41 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2009-May-17 22:21:41 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2009-May-17 22:21:41 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2009-May-17 22:21:41 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:21:41 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:21:41 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:21:41 LOG2 antvel: Parameters to Doppler: Topocentric 94901 2009 137 0.0 2009-May-17 22:21:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:21:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2009-May-17 22:21:41 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2009-May-17 22:21:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:21:41 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:21:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2009-May-17 22:21:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:21:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-17 22:21:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:21:41 LOG5 begin_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2009-May-17 22:21:41 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.638399 2009.3776364805942 18.999933 2009-May-17 22:21:41 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333331 7.374444444444447 2009-May-17 22:21:41 LOG4 log_alfabeam: ALFABEAM 1 12.833542788763435 7.460151104842776 2009-May-17 22:21:41 LOG4 log_alfabeam: ALFABEAM 2 12.826949593311225 7.460482151954202 2009-May-17 22:21:41 LOG4 log_alfabeam: ALFABEAM 3 12.822720841814865 7.374970804924359 2009-May-17 22:21:41 LOG4 log_alfabeam: ALFABEAM 4 12.825136805286650 7.288583964208212 2009-May-17 22:21:41 LOG4 log_alfabeam: ALFABEAM 5 12.831754961587038 7.288461189047403 2009-May-17 22:21:41 LOG4 log_alfabeam: ALFABEAM 6 12.835932116662651 7.374515511673121 2009-May-17 22:21:41 INFO2 take_data: Starting WAPP+GALFA scan: 913700224 2009-May-17 22:21:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:21:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:21:42 LOG5 begin_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2009-May-17 22:21:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:21:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2009-May-17 22:21:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:21:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:21:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 22:21:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8503.00 2009-May-17 22:21:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:21:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:21:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:21:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:21:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:21:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:21:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:21:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:21:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-May-17 22:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-May-17 22:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-May-17 22:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-May-17 22:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-May-17 22:21:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:21:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:21:53 LOG5 end_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2009-May-17 22:21:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:21:53 LOG5 end_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2009-May-17 22:21:53 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-May-17 22:21:53 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-May-17 22:21:53 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-May-17 22:21:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-17 22:21:53 LOG5 begin_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2009-May-17 22:21:53 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-17 22:21:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-May-17 22:21:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-17 22:21:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-17 22:21:53 LOG5 end_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2009-May-17 22:21:53 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2009-May-17 22:21:53 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2009-May-17 22:21:53 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-May-17 22:21:53 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:21:53 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:21:53 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:21:53 LOG2 antvel: Parameters to Doppler: Topocentric 94913 2009 137 0.0 2009-May-17 22:21:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:21:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-May-17 22:21:53 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-May-17 22:21:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:21:53 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:21:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-May-17 22:21:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:21:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-17 22:21:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:21:53 LOG5 begin_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2009-May-17 22:21:53 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.641741 2009.3776368608512 18.999933 2009-May-17 22:21:53 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333336 7.374444444444433 2009-May-17 22:21:53 LOG4 log_alfabeam: ALFABEAM 1 12.833554253308860 7.460026282905669 2009-May-17 22:21:53 LOG4 log_alfabeam: ALFABEAM 2 12.826961083724115 7.460552602297955 2009-May-17 22:21:53 LOG4 log_alfabeam: ALFABEAM 3 12.822720939677676 7.375166159098365 2009-May-17 22:21:53 LOG4 log_alfabeam: ALFABEAM 4 12.825125297145282 7.288708740912064 2009-May-17 22:21:53 LOG4 log_alfabeam: ALFABEAM 5 12.831743392225404 7.288389484434877 2009-May-17 22:21:53 LOG4 log_alfabeam: ALFABEAM 6 12.835932127616305 7.374319122341349 2009-May-17 22:21:53 INFO2 take_data: Starting WAPP+GALFA scan: 913700225 2009-May-17 22:21:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:21:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:21:54 LOG5 begin_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2009-May-17 22:21:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:21:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-May-17 22:21:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:21:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:21:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:21:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8515.00 2009-May-17 22:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-May-17 22:21:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:21:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:21:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:21:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:21:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:21:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:21:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:21:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:21:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.601 (still bad) 2009-May-17 22:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.599 (still bad) 2009-May-17 22:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.598 (still bad) 2009-May-17 22:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.600 (still bad) 2009-May-17 22:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.598 (still bad) 2009-May-17 22:22:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:22:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:22:05 LOG5 end_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2009-May-17 22:22:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:22:05 LOG5 end_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2009-May-17 22:22:05 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2009-May-17 22:22:05 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2009-May-17 22:22:05 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2009-May-17 22:22:05 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:22:05 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:22:05 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:22:05 LOG2 antvel: Parameters to Doppler: Topocentric 94925 2009 137 0.0 2009-May-17 22:22:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:22:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2009-May-17 22:22:05 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2009-May-17 22:22:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:22:05 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:22:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2009-May-17 22:22:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:22:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-17 22:22:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:22:05 LOG5 begin_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2009-May-17 22:22:05 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.645083 2009.3776372411082 18.999933 2009-May-17 22:22:05 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333331 7.374444444444442 2009-May-17 22:22:05 LOG4 log_alfabeam: ALFABEAM 1 12.833565648519262 7.459901697987219 2009-May-17 22:22:05 LOG4 log_alfabeam: ALFABEAM 2 12.826972530581134 7.460622391559088 2009-May-17 22:22:05 LOG4 log_alfabeam: ALFABEAM 3 12.822721063026577 7.375360610177269 2009-May-17 22:22:05 LOG4 log_alfabeam: ALFABEAM 4 12.825113858500254 7.288833283621534 2009-May-17 22:22:05 LOG4 log_alfabeam: ALFABEAM 5 12.831731866406679 7.288318451367302 2009-May-17 22:22:05 LOG4 log_alfabeam: ALFABEAM 6 12.835932112324919 7.374123633491951 2009-May-17 22:22:05 INFO2 take_data: Starting WAPP+GALFA scan: 913700226 2009-May-17 22:22:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:22:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:22:06 LOG5 begin_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2009-May-17 22:22:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:22:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2009-May-17 22:22:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:22:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:22:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:22:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8527.00 2009-May-17 22:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.598 (still bad) 2009-May-17 22:22:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:22:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:22:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:22:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:22:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:22:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:22:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:22:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:22:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.537 (still bad) 2009-May-17 22:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.539 (still bad) 2009-May-17 22:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.545 (still bad) 2009-May-17 22:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.541 (still bad) 2009-May-17 22:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.540 (still bad) 2009-May-17 22:22:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:22:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:22:17 LOG5 end_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2009-May-17 22:22:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:22:17 LOG5 end_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2009-May-17 22:22:17 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2009-May-17 22:22:17 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2009-May-17 22:22:17 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2009-May-17 22:22:17 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:22:17 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:22:17 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:22:17 LOG2 antvel: Parameters to Doppler: Topocentric 94937 2009 137 0.0 2009-May-17 22:22:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:22:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2009-May-17 22:22:17 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2009-May-17 22:22:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:22:17 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:22:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2009-May-17 22:22:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:22:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-17 22:22:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:22:17 LOG5 begin_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2009-May-17 22:22:17 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.648426 2009.3776376213655 18.999933 2009-May-17 22:22:17 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333336 7.374444444444442 2009-May-17 22:22:17 LOG4 log_alfabeam: ALFABEAM 1 12.833576978204023 7.459777315363148 2009-May-17 22:22:17 LOG4 log_alfabeam: ALFABEAM 2 12.826983937362398 7.460691546215931 2009-May-17 22:22:17 LOG4 log_alfabeam: ALFABEAM 3 12.822721211553620 7.375554219444219 2009-May-17 22:22:17 LOG4 log_alfabeam: ALFABEAM 4 12.825102485529515 7.288957627013101 2009-May-17 22:22:17 LOG4 log_alfabeam: ALFABEAM 5 12.831720380631445 7.288248062930550 2009-May-17 22:22:17 LOG4 log_alfabeam: ALFABEAM 6 12.835932071132445 7.373928983618152 2009-May-17 22:22:17 INFO2 take_data: Starting WAPP+GALFA scan: 913700227 2009-May-17 22:22:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:22:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:22:18 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2009-May-17 22:22:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:22:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2009-May-17 22:22:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:22:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:22:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:22:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8539.00 2009-May-17 22:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.540 (still bad) 2009-May-17 22:22:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:22:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:22:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:22:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:22:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:22:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:22:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:22:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:22:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.537 (still bad) 2009-May-17 22:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.537 (still bad) 2009-May-17 22:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.544 (still bad) 2009-May-17 22:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.541 (still bad) 2009-May-17 22:22:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:22:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:22:29 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2009-May-17 22:22:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:22:29 LOG5 end_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2009-May-17 22:22:29 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2009-May-17 22:22:29 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2009-May-17 22:22:29 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2009-May-17 22:22:29 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:22:29 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:22:29 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:22:29 LOG2 antvel: Parameters to Doppler: Topocentric 94949 2009 137 0.0 2009-May-17 22:22:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:22:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2009-May-17 22:22:29 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2009-May-17 22:22:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:22:29 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:22:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2009-May-17 22:22:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:22:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-17 22:22:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:22:29 LOG5 begin_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2009-May-17 22:22:29 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.651768 2009.3776380016225 18.999933 2009-May-17 22:22:29 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333334 7.374444444444435 2009-May-17 22:22:29 LOG4 log_alfabeam: ALFABEAM 1 12.833588236014085 7.459653211836416 2009-May-17 22:22:29 LOG4 log_alfabeam: ALFABEAM 2 12.826995297320307 7.460760030742478 2009-May-17 22:22:29 LOG4 log_alfabeam: ALFABEAM 3 12.822721384817553 7.375746874586597 2009-May-17 22:22:29 LOG4 log_alfabeam: ALFABEAM 4 12.825091184608228 7.289081694271106 2009-May-17 22:22:29 LOG4 log_alfabeam: ALFABEAM 5 12.831708941698810 7.288178355320533 2009-May-17 22:22:29 LOG4 log_alfabeam: ALFABEAM 6 12.835932004419954 7.373735285741967 2009-May-17 22:22:29 INFO2 take_data: Starting WAPP+GALFA scan: 913700228 2009-May-17 22:22:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:22:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:22:30 LOG5 begin_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2009-May-17 22:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.541 (still bad) 2009-May-17 22:22:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:22:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2009-May-17 22:22:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:22:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:22:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:22:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8551.00 2009-May-17 22:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.541 (still bad) 2009-May-17 22:22:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.534 (still bad) 2009-May-17 22:22:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 22:22:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.516 1.388 1.346 1.335 2009-May-17 22:22:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.225 1.532 1.371 1.392 2009-May-17 22:22:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.428 1.338 1.355 1.470 2009-May-17 22:22:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.468 0.110 1.273 0.136 2009-May-17 22:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.539 (still bad) 2009-May-17 22:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.536 (still bad) 2009-May-17 22:22:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:22:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:22:41 LOG5 end_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2009-May-17 22:22:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:22:41 LOG5 end_task: Level: (3) ID = <10269> Status = 0 0 0 0 ok 2009-May-17 22:22:41 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2009-May-17 22:22:41 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2009-May-17 22:22:41 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2009-May-17 22:22:41 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:22:41 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:22:41 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:22:41 LOG2 antvel: Parameters to Doppler: Topocentric 94961 2009 137 0.0 2009-May-17 22:22:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:22:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2009-May-17 22:22:41 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2009-May-17 22:22:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:22:41 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:22:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2009-May-17 22:22:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:22:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-17 22:22:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:22:41 LOG5 begin_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2009-May-17 22:22:41 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.655111 2009.3776383818795 18.999933 2009-May-17 22:22:41 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333336 7.374444444444435 2009-May-17 22:22:41 LOG4 log_alfabeam: ALFABEAM 1 12.833599429114287 7.459529315470832 2009-May-17 22:22:41 LOG4 log_alfabeam: ALFABEAM 2 12.827006617331989 7.460827891928110 2009-May-17 22:22:41 LOG4 log_alfabeam: ALFABEAM 3 12.822721582573278 7.375938694428958 2009-May-17 22:22:41 LOG4 log_alfabeam: ALFABEAM 4 12.825079948545977 7.289205557274314 2009-May-17 22:22:41 LOG4 log_alfabeam: ALFABEAM 5 12.831697542688554 7.288109280947851 2009-May-17 22:22:41 LOG4 log_alfabeam: ALFABEAM 6 12.835931912500357 7.373542420500543 2009-May-17 22:22:41 INFO2 take_data: Starting WAPP+GALFA scan: 913700229 2009-May-17 22:22:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:22:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:22:42 LOG5 begin_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2009-May-17 22:22:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:22:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2009-May-17 22:22:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:22:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:22:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.537 (still bad) 2009-May-17 22:22:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8563.00 2009-May-17 22:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.537 (still bad) 2009-May-17 22:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.522 (still bad) 2009-May-17 22:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.524 (still bad) 2009-May-17 22:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.527 (still bad) 2009-May-17 22:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.526 (still bad) 2009-May-17 22:22:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:22:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:22:53 LOG5 end_task: Level: (4) ID = <10272> Status = 0 0 0 0 ok 2009-May-17 22:22:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:22:53 LOG5 end_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2009-May-17 22:22:53 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2009-May-17 22:22:53 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2009-May-17 22:22:53 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2009-May-17 22:22:53 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:22:53 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:22:53 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:22:53 LOG2 antvel: Parameters to Doppler: Topocentric 94973 2009 137 0.0 2009-May-17 22:22:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:22:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2009-May-17 22:22:53 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2009-May-17 22:22:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:22:53 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:22:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2009-May-17 22:22:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:22:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-17 22:22:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:22:53 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2009-May-17 22:22:53 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.658453 2009.3776387621365 18.999933 2009-May-17 22:22:53 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333331 7.374444444444427 2009-May-17 22:22:53 LOG4 log_alfabeam: ALFABEAM 1 12.833610551234059 7.459405702664641 2009-May-17 22:22:53 LOG4 log_alfabeam: ALFABEAM 2 12.827017890705967 7.460895094932778 2009-May-17 22:22:53 LOG4 log_alfabeam: ALFABEAM 3 12.822721804357595 7.376129567754056 2009-May-17 22:22:53 LOG4 log_alfabeam: ALFABEAM 4 12.825068783639237 7.289329139608875 2009-May-17 22:22:53 LOG4 log_alfabeam: ALFABEAM 5 12.831686190343524 7.288040875310313 2009-May-17 22:22:53 LOG4 log_alfabeam: ALFABEAM 6 12.835931795777572 7.373350499820833 2009-May-17 22:22:53 INFO2 take_data: Starting WAPP+GALFA scan: 913700230 2009-May-17 22:22:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:22:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:22:54 LOG5 begin_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2009-May-17 22:22:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:22:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2009-May-17 22:22:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:22:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:22:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:22:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8575.00 2009-May-17 22:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.525 (still bad) 2009-May-17 22:22:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:22:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:22:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:22:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:22:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:22:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:22:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:22:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:22:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.526 (still bad) 2009-May-17 22:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.523 (still bad) 2009-May-17 22:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.525 (still bad) 2009-May-17 22:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.533 (still bad) 2009-May-17 22:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.523 (still bad) 2009-May-17 22:23:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:23:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:23:05 LOG5 end_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2009-May-17 22:23:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:23:05 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2009-May-17 22:23:05 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2009-May-17 22:23:05 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2009-May-17 22:23:05 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2009-May-17 22:23:05 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:23:05 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:23:05 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:23:05 LOG2 antvel: Parameters to Doppler: Topocentric 94985 2009 137 0.0 2009-May-17 22:23:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:23:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2009-May-17 22:23:05 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2009-May-17 22:23:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:23:05 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:23:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2009-May-17 22:23:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:23:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-17 22:23:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:23:05 LOG5 begin_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2009-May-17 22:23:05 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.661796 2009.3776391423935 18.999933 2009-May-17 22:23:05 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333334 7.374444444444435 2009-May-17 22:23:05 LOG4 log_alfabeam: ALFABEAM 1 12.833621609453722 7.459282301663101 2009-May-17 22:23:05 LOG4 log_alfabeam: ALFABEAM 2 12.827029124271649 7.460961685691195 2009-May-17 22:23:05 LOG4 log_alfabeam: ALFABEAM 3 12.822722049961914 7.376319612343608 2009-May-17 22:23:05 LOG4 log_alfabeam: ALFABEAM 4 12.825057682782209 7.289452512976104 2009-May-17 22:23:05 LOG4 log_alfabeam: ALFABEAM 5 12.831674877791064 7.287973091685566 2009-May-17 22:23:05 LOG4 log_alfabeam: ALFABEAM 6 12.835931654527142 7.373159405377550 2009-May-17 22:23:05 INFO2 take_data: Starting WAPP+GALFA scan: 913700231 2009-May-17 22:23:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:23:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:23:06 LOG5 begin_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2009-May-17 22:23:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:23:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2009-May-17 22:23:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:23:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:23:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:23:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8587.00 2009-May-17 22:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.524 (still bad) 2009-May-17 22:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.536 (still bad) 2009-May-17 22:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.531 (still bad) 2009-May-17 22:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.532 (still bad) 2009-May-17 22:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.538 (still bad) 2009-May-17 22:23:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.532 (still bad) 2009-May-17 22:23:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:23:17 LOG5 end_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2009-May-17 22:23:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:23:17 LOG5 end_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2009-May-17 22:23:17 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-May-17 22:23:17 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-May-17 22:23:17 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-May-17 22:23:17 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-17 22:23:17 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-17 22:23:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-17 22:23:17 LOG5 begin_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2009-May-17 22:23:17 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-17 22:23:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-17 22:23:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-17 22:23:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-17 22:23:17 LOG5 end_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2009-May-17 22:23:17 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-May-17 22:23:17 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2009-May-17 22:23:17 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2009-May-17 22:23:17 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-May-17 22:23:17 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:23:17 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:23:17 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:23:17 LOG2 antvel: Parameters to Doppler: Topocentric 94997 2009 137 0.0 2009-May-17 22:23:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:23:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-May-17 22:23:17 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-May-17 22:23:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:23:17 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:23:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-May-17 22:23:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:23:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-17 22:23:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:23:17 LOG5 begin_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2009-May-17 22:23:17 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.665138 2009.3776395226507 18.999933 2009-May-17 22:23:17 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333338 7.374444444444431 2009-May-17 22:23:17 LOG4 log_alfabeam: ALFABEAM 1 12.833632597580063 7.459159188457525 2009-May-17 22:23:17 LOG4 log_alfabeam: ALFABEAM 2 12.827040311393269 7.461027630035881 2009-May-17 22:23:17 LOG4 log_alfabeam: ALFABEAM 3 12.822722318901786 7.376508718064459 2009-May-17 22:23:17 LOG4 log_alfabeam: ALFABEAM 4 12.825046652193789 7.289575601366347 2009-May-17 22:23:17 LOG4 log_alfabeam: ALFABEAM 5 12.831663611718168 7.287905964886892 2009-May-17 22:23:17 LOG4 log_alfabeam: ALFABEAM 6 12.835931489175138 7.372969248013800 2009-May-17 22:23:17 INFO2 take_data: Starting WAPP+GALFA scan: 913700232 2009-May-17 22:23:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:23:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:23:18 LOG5 begin_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2009-May-17 22:23:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:23:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-May-17 22:23:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:23:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:23:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:23:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8599.00 2009-May-17 22:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.532 (still bad) 2009-May-17 22:23:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:23:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:23:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:23:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:23:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:23:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:23:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:23:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:23:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.183 (still bad) 2009-May-17 22:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.178 (still bad) 2009-May-17 22:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.180 (still bad) 2009-May-17 22:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.191 (still bad) 2009-May-17 22:23:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:23:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:23:29 LOG5 end_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2009-May-17 22:23:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:23:29 LOG5 end_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2009-May-17 22:23:29 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2009-May-17 22:23:29 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2009-May-17 22:23:29 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2009-May-17 22:23:29 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:23:29 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:23:29 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:23:29 LOG2 antvel: Parameters to Doppler: Topocentric 95009 2009 137 0.0 2009-May-17 22:23:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:23:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2009-May-17 22:23:29 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2009-May-17 22:23:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:23:29 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:23:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2009-May-17 22:23:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:23:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-17 22:23:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:23:29 LOG5 begin_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2009-May-17 22:23:29 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.668481 2009.3776399029077 18.999933 2009-May-17 22:23:29 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333336 7.374444444444435 2009-May-17 22:23:29 LOG4 log_alfabeam: ALFABEAM 1 12.833643522609840 7.459036291483121 2009-May-17 22:23:29 LOG4 log_alfabeam: ALFABEAM 2 12.827051458852539 7.461092973060968 2009-May-17 22:23:29 LOG4 log_alfabeam: ALFABEAM 3 12.822722611004192 7.376697001661245 2009-May-17 22:23:29 LOG4 log_alfabeam: ALFABEAM 4 12.825035684851915 7.289698476295013 2009-May-17 22:23:29 LOG4 log_alfabeam: ALFABEAM 5 12.831652385299769 7.287839449044872 2009-May-17 22:23:29 LOG4 log_alfabeam: ALFABEAM 6 12.835931299960651 7.372779910436387 2009-May-17 22:23:29 INFO2 take_data: Starting WAPP+GALFA scan: 913700233 2009-May-17 22:23:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:23:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:23:30 LOG5 begin_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2009-May-17 22:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.181 (still bad) 2009-May-17 22:23:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:23:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2009-May-17 22:23:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:23:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:23:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:23:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8611.00 2009-May-17 22:23:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:23:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:23:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:23:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:23:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:23:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:23:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:23:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.177 (still bad) 2009-May-17 22:23:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-May-17 22:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.142 (still bad) 2009-May-17 22:23:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 22:23:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.128 1.059 1.030 1.021 2009-May-17 22:23:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.912 1.151 1.040 1.058 2009-May-17 22:23:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.068 1.006 1.013 1.148 2009-May-17 22:23:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.110 0.938 0.135 2009-May-17 22:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.145 (still bad) 2009-May-17 22:23:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:23:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:23:41 LOG5 end_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2009-May-17 22:23:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:23:41 LOG5 end_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2009-May-17 22:23:41 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2009-May-17 22:23:41 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2009-May-17 22:23:41 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2009-May-17 22:23:41 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:23:41 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:23:41 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:23:41 LOG2 antvel: Parameters to Doppler: Topocentric 95021 2009 137 0.0 2009-May-17 22:23:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:23:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2009-May-17 22:23:41 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2009-May-17 22:23:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:23:41 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:23:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2009-May-17 22:23:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:23:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-17 22:23:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:23:41 LOG5 begin_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2009-May-17 22:23:41 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.671823 2009.3776402831647 18.999933 2009-May-17 22:23:41 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333336 7.374444444444443 2009-May-17 22:23:41 LOG4 log_alfabeam: ALFABEAM 1 12.833654378426088 7.458913686322160 2009-May-17 22:23:41 LOG4 log_alfabeam: ALFABEAM 2 12.827062560068990 7.461157681258332 2009-May-17 22:23:41 LOG4 log_alfabeam: ALFABEAM 3 12.822722925764163 7.376884354073685 2009-May-17 22:23:41 LOG4 log_alfabeam: ALFABEAM 4 12.825024786898977 7.289821062158715 2009-May-17 22:23:41 LOG4 log_alfabeam: ALFABEAM 5 12.831641205167363 7.287773578301646 2009-May-17 22:23:41 LOG4 log_alfabeam: ALFABEAM 6 12.835931087331161 7.372591502415611 2009-May-17 22:23:41 INFO2 take_data: Starting WAPP+GALFA scan: 913700234 2009-May-17 22:23:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:23:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:23:42 LOG5 begin_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2009-May-17 22:23:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:23:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2009-May-17 22:23:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:23:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:23:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.144 (still bad) 2009-May-17 22:23:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8623.00 2009-May-17 22:23:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:23:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:23:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:23:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:23:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:23:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:23:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:23:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:23:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.144 (still bad) 2009-May-17 22:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2009-May-17 22:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2009-May-17 22:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.152 (still bad) 2009-May-17 22:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2009-May-17 22:23:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:23:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:23:53 LOG5 end_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2009-May-17 22:23:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:23:53 LOG5 end_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2009-May-17 22:23:53 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2009-May-17 22:23:53 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2009-May-17 22:23:53 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2009-May-17 22:23:53 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:23:53 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:23:53 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:23:53 LOG2 antvel: Parameters to Doppler: Topocentric 95033 2009 137 0.0 2009-May-17 22:23:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:23:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2009-May-17 22:23:53 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2009-May-17 22:23:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:23:53 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:23:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2009-May-17 22:23:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:23:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-17 22:23:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:23:53 LOG5 begin_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2009-May-17 22:23:53 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.675166 2009.3776406634217 18.999933 2009-May-17 22:23:53 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333334 7.374444444444450 2009-May-17 22:23:53 LOG4 log_alfabeam: ALFABEAM 1 12.833665171942913 7.458791301607910 2009-May-17 22:23:53 LOG4 log_alfabeam: ALFABEAM 2 12.827073621776631 7.461221798895389 2009-May-17 22:23:53 LOG4 log_alfabeam: ALFABEAM 3 12.822723263043336 7.377070891015196 2009-May-17 22:23:53 LOG4 log_alfabeam: ALFABEAM 4 12.825013951395752 7.289943430278683 2009-May-17 22:23:53 LOG4 log_alfabeam: ALFABEAM 5 12.831630064543484 7.287708307626635 2009-May-17 22:23:53 LOG4 log_alfabeam: ALFABEAM 6 12.835930851490259 7.372403907684649 2009-May-17 22:23:53 INFO2 take_data: Starting WAPP+GALFA scan: 913700235 2009-May-17 22:23:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:23:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:23:54 LOG5 begin_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2009-May-17 22:23:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:23:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2009-May-17 22:23:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:23:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:23:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.143 (still bad) 2009-May-17 22:23:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8635.00 2009-May-17 22:23:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:23:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:23:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:23:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:23:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:23:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:23:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:23:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:23:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.140 (still bad) 2009-May-17 22:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.137 (still bad) 2009-May-17 22:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.137 (still bad) 2009-May-17 22:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.146 (still bad) 2009-May-17 22:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.139 (still bad) 2009-May-17 22:24:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:24:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:24:05 LOG5 end_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2009-May-17 22:24:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:24:05 LOG5 end_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2009-May-17 22:24:05 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2009-May-17 22:24:05 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2009-May-17 22:24:05 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2009-May-17 22:24:05 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:24:05 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:24:05 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:24:05 LOG2 antvel: Parameters to Doppler: Topocentric 95045 2009 137 0.0 2009-May-17 22:24:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:24:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2009-May-17 22:24:05 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2009-May-17 22:24:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:24:05 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:24:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2009-May-17 22:24:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:24:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-17 22:24:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:24:05 LOG5 begin_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2009-May-17 22:24:05 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.678508 2009.377641043679 18.999933 2009-May-17 22:24:05 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333331 7.374444444444446 2009-May-17 22:24:05 LOG4 log_alfabeam: ALFABEAM 1 12.833675897118509 7.458669212511778 2009-May-17 22:24:05 LOG4 log_alfabeam: ALFABEAM 2 12.827084637449927 7.461285293110505 2009-May-17 22:24:05 LOG4 log_alfabeam: ALFABEAM 3 12.822723622316898 7.377256504487226 2009-May-17 22:24:05 LOG4 log_alfabeam: ALFABEAM 4 12.825003184409219 7.290065505459815 2009-May-17 22:24:05 LOG4 log_alfabeam: ALFABEAM 5 12.831618970004557 7.287643670503998 2009-May-17 22:24:05 LOG4 log_alfabeam: ALFABEAM 6 12.835930592906152 7.372217234952078 2009-May-17 22:24:05 INFO2 take_data: Starting WAPP+GALFA scan: 913700236 2009-May-17 22:24:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:24:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:24:06 LOG5 begin_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2009-May-17 22:24:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:24:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2009-May-17 22:24:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:24:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:24:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:24:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8647.00 2009-May-17 22:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.138 (still bad) 2009-May-17 22:24:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:24:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:24:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:24:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:24:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:24:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:24:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:24:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:24:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 22:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 22:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 22:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.143 (still bad) 2009-May-17 22:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 22:24:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:24:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:24:17 LOG5 end_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2009-May-17 22:24:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:24:17 LOG5 end_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2009-May-17 22:24:17 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2009-May-17 22:24:17 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2009-May-17 22:24:17 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2009-May-17 22:24:17 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:24:17 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:24:17 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:24:17 LOG2 antvel: Parameters to Doppler: Topocentric 95057 2009 137 0.0 2009-May-17 22:24:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:24:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2009-May-17 22:24:17 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2009-May-17 22:24:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:24:17 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:24:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2009-May-17 22:24:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:24:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-17 22:24:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:24:17 LOG5 begin_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2009-May-17 22:24:17 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.681850 2009.377641423936 18.999933 2009-May-17 22:24:17 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333334 7.374444444444443 2009-May-17 22:24:17 LOG4 log_alfabeam: ALFABEAM 1 12.833686557605020 7.458547384287379 2009-May-17 22:24:17 LOG4 log_alfabeam: ALFABEAM 2 12.827095610498196 7.461348188627523 2009-May-17 22:24:17 LOG4 log_alfabeam: ALFABEAM 3 12.822724003363003 7.377441254025805 2009-May-17 22:24:17 LOG4 log_alfabeam: ALFABEAM 4 12.824992482274697 7.290187322409812 2009-May-17 22:24:17 LOG4 log_alfabeam: ALFABEAM 5 12.831607918121275 7.287579641796395 2009-May-17 22:24:17 LOG4 log_alfabeam: ALFABEAM 6 12.835930311835225 7.372031424441666 2009-May-17 22:24:17 INFO2 take_data: Starting WAPP+GALFA scan: 913700237 2009-May-17 22:24:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:24:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:24:18 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2009-May-17 22:24:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:24:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2009-May-17 22:24:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:24:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:24:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:24:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8659.00 2009-May-17 22:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 22:24:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:24:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:24:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:24:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:24:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:24:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:24:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:24:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:24:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 22:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 22:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 22:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-May-17 22:24:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:24:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:24:29 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2009-May-17 22:24:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:24:29 LOG5 end_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2009-May-17 22:24:29 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2009-May-17 22:24:29 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2009-May-17 22:24:29 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2009-May-17 22:24:29 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:24:29 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:24:29 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:24:29 LOG2 antvel: Parameters to Doppler: Topocentric 95069 2009 137 0.0 2009-May-17 22:24:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:24:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2009-May-17 22:24:29 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2009-May-17 22:24:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:24:29 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:24:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2009-May-17 22:24:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:24:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-May-17 22:24:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:24:29 LOG5 begin_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2009-May-17 22:24:29 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.685193 2009.377641804193 18.999933 2009-May-17 22:24:29 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333338 7.374444444444438 2009-May-17 22:24:29 LOG4 log_alfabeam: ALFABEAM 1 12.833697156975381 7.458425782450161 2009-May-17 22:24:29 LOG4 log_alfabeam: ALFABEAM 2 12.827106544281420 7.461410509410579 2009-May-17 22:24:29 LOG4 log_alfabeam: ALFABEAM 3 12.822724405989389 7.377625198139609 2009-May-17 22:24:29 LOG4 log_alfabeam: ALFABEAM 4 12.824981841406904 7.290308915577967 2009-May-17 22:24:29 LOG4 log_alfabeam: ALFABEAM 5 12.831596905513608 7.287516197137924 2009-May-17 22:24:29 LOG4 log_alfabeam: ALFABEAM 6 12.835930008503443 7.371846417401330 2009-May-17 22:24:29 INFO2 take_data: Starting WAPP+GALFA scan: 913700238 2009-May-17 22:24:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:24:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:24:30 LOG5 begin_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2009-May-17 22:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-May-17 22:24:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:24:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2009-May-17 22:24:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:24:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:24:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:24:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8671.00 2009-May-17 22:24:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:24:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:24:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:24:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:24:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:24:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:24:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:24:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-May-17 22:24:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 22:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 22:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-May-17 22:24:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 22:24:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.134 1.051 1.032 1.016 2009-May-17 22:24:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 1.133 1.032 1.056 2009-May-17 22:24:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 1.008 1.008 1.132 2009-May-17 22:24:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.088 0.110 0.945 0.136 2009-May-17 22:24:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:24:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:24:41 LOG5 end_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2009-May-17 22:24:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:24:41 LOG5 end_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2009-May-17 22:24:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-May-17 22:24:41 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-May-17 22:24:41 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-May-17 22:24:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-17 22:24:41 LOG5 begin_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2009-May-17 22:24:41 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-17 22:24:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-May-17 22:24:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-17 22:24:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-17 22:24:41 LOG5 end_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2009-May-17 22:24:41 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2009-May-17 22:24:41 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2009-May-17 22:24:41 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-May-17 22:24:41 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:24:41 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:24:41 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:24:41 LOG2 antvel: Parameters to Doppler: Topocentric 95081 2009 137 0.0 2009-May-17 22:24:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:24:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-May-17 22:24:41 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-May-17 22:24:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:24:41 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:24:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-May-17 22:24:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:24:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-17 22:24:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:24:41 LOG5 begin_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2009-May-17 22:24:41 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.688535 2009.37764218445 18.999933 2009-May-17 22:24:41 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333336 7.374444444444443 2009-May-17 22:24:41 LOG4 log_alfabeam: ALFABEAM 1 12.833707689298510 7.458304481552307 2009-May-17 22:24:41 LOG4 log_alfabeam: ALFABEAM 2 12.827117432355658 7.461472223544083 2009-May-17 22:24:41 LOG4 log_alfabeam: ALFABEAM 3 12.822724829642711 7.377808230401886 2009-May-17 22:24:41 LOG4 log_alfabeam: ALFABEAM 4 12.824971267761763 7.290430210384672 2009-May-17 22:24:41 LOG4 log_alfabeam: ALFABEAM 5 12.831585938676145 7.287453369049803 2009-May-17 22:24:41 LOG4 log_alfabeam: ALFABEAM 6 12.835929683408834 7.371662320967490 2009-May-17 22:24:41 INFO2 take_data: Starting WAPP+GALFA scan: 913700239 2009-May-17 22:24:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:24:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:24:42 LOG5 begin_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2009-May-17 22:24:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:24:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-May-17 22:24:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:24:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:24:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 22:24:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8683.00 2009-May-17 22:24:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:24:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:24:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:24:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:24:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:24:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:24:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:24:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:24:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-May-17 22:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.610 (still bad) 2009-May-17 22:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.607 (still bad) 2009-May-17 22:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.613 (still bad) 2009-May-17 22:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.611 (still bad) 2009-May-17 22:24:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:24:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:24:53 LOG5 end_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2009-May-17 22:24:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:24:53 LOG5 end_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2009-May-17 22:24:53 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2009-May-17 22:24:53 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2009-May-17 22:24:53 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2009-May-17 22:24:53 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:24:53 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:24:53 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:24:53 LOG2 antvel: Parameters to Doppler: Topocentric 95093 2009 137 0.0 2009-May-17 22:24:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:24:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2009-May-17 22:24:53 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2009-May-17 22:24:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:24:53 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:24:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2009-May-17 22:24:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:24:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-17 22:24:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:24:53 LOG5 begin_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2009-May-17 22:24:53 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.691878 2009.377642564707 18.999933 2009-May-17 22:24:53 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333331 7.374444444444442 2009-May-17 22:24:53 LOG4 log_alfabeam: ALFABEAM 1 12.833718161285883 7.458183410755698 2009-May-17 22:24:53 LOG4 log_alfabeam: ALFABEAM 2 12.827128281335824 7.461533373288643 2009-May-17 22:24:53 LOG4 log_alfabeam: ALFABEAM 3 12.822725274267379 7.377990463974828 2009-May-17 22:24:53 LOG4 log_alfabeam: ALFABEAM 4 12.824960754603053 7.290551277631879 2009-May-17 22:24:53 LOG4 log_alfabeam: ALFABEAM 5 12.831575010950251 7.287391114538133 2009-May-17 22:24:53 LOG4 log_alfabeam: ALFABEAM 6 12.835929336670068 7.371479021413703 2009-May-17 22:24:53 INFO2 take_data: Starting WAPP+GALFA scan: 913700240 2009-May-17 22:24:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:24:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:24:54 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2009-May-17 22:24:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:24:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2009-May-17 22:24:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:24:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:24:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.610 (still bad) 2009-May-17 22:24:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8695.00 2009-May-17 22:24:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:24:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:24:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:24:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:24:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:24:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:24:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:24:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:24:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.610 (still bad) 2009-May-17 22:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.558 (still bad) 2009-May-17 22:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.553 (still bad) 2009-May-17 22:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.556 (still bad) 2009-May-17 22:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.555 (still bad) 2009-May-17 22:25:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:25:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:25:05 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2009-May-17 22:25:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:25:05 LOG5 end_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2009-May-17 22:25:05 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2009-May-17 22:25:05 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2009-May-17 22:25:05 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2009-May-17 22:25:05 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:25:05 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:25:05 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:25:05 LOG2 antvel: Parameters to Doppler: Topocentric 95105 2009 137 0.0 2009-May-17 22:25:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:25:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2009-May-17 22:25:05 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2009-May-17 22:25:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:25:05 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:25:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2009-May-17 22:25:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:25:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-17 22:25:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:25:05 LOG5 begin_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2009-May-17 22:25:05 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.695220 2009.3776429449642 18.999933 2009-May-17 22:25:05 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333334 7.374444444444428 2009-May-17 22:25:05 LOG4 log_alfabeam: ALFABEAM 1 12.833728567078952 7.458062644197746 2009-May-17 22:25:05 LOG4 log_alfabeam: ALFABEAM 2 12.827139084831856 7.461593927343881 2009-May-17 22:25:05 LOG4 log_alfabeam: ALFABEAM 3 12.822725739291837 7.378171793465711 2009-May-17 22:25:05 LOG4 log_alfabeam: ALFABEAM 4 12.824950307813955 7.290672043152201 2009-May-17 22:25:05 LOG4 log_alfabeam: ALFABEAM 5 12.831564128776455 7.287329465497693 2009-May-17 22:25:05 LOG4 log_alfabeam: ALFABEAM 6 12.835928968804259 7.371296624841811 2009-May-17 22:25:05 INFO2 take_data: Starting WAPP+GALFA scan: 913700241 2009-May-17 22:25:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:25:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:25:06 LOG5 begin_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2009-May-17 22:25:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:25:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2009-May-17 22:25:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:25:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:25:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:25:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8707.00 2009-May-17 22:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.556 (still bad) 2009-May-17 22:25:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:25:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:25:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:25:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:25:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:25:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:25:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:25:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:25:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.558 (still bad) 2009-May-17 22:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.556 (still bad) 2009-May-17 22:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.555 (still bad) 2009-May-17 22:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.557 (still bad) 2009-May-17 22:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.555 (still bad) 2009-May-17 22:25:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:25:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:25:17 LOG5 end_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2009-May-17 22:25:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:25:17 LOG5 end_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2009-May-17 22:25:17 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2009-May-17 22:25:17 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2009-May-17 22:25:17 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2009-May-17 22:25:17 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:25:17 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:25:17 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:25:17 LOG2 antvel: Parameters to Doppler: Topocentric 95117 2009 137 0.0 2009-May-17 22:25:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:25:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2009-May-17 22:25:17 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2009-May-17 22:25:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:25:17 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:25:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2009-May-17 22:25:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:25:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-17 22:25:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:25:17 LOG5 begin_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2009-May-17 22:25:17 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.698563 2009.3776433252212 18.999933 2009-May-17 22:25:17 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333336 7.374444444444439 2009-May-17 22:25:17 LOG4 log_alfabeam: ALFABEAM 1 12.833738913309739 7.457942111264614 2009-May-17 22:25:17 LOG4 log_alfabeam: ALFABEAM 2 12.827149849411136 7.461653927191194 2009-May-17 22:25:17 LOG4 log_alfabeam: ALFABEAM 3 12.822726224692101 7.378352331027333 2009-May-17 22:25:17 LOG4 log_alfabeam: ALFABEAM 4 12.824939920737867 7.290792577527140 2009-May-17 22:25:17 LOG4 log_alfabeam: ALFABEAM 5 12.831553285543595 7.287268379725639 2009-May-17 22:25:17 LOG4 log_alfabeam: ALFABEAM 6 12.835928579897633 7.371115018530947 2009-May-17 22:25:17 INFO2 take_data: Starting WAPP+GALFA scan: 913700242 2009-May-17 22:25:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:25:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:25:18 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2009-May-17 22:25:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:25:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2009-May-17 22:25:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:25:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:25:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:25:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8719.00 2009-May-17 22:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.555 (still bad) 2009-May-17 22:25:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:25:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:25:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:25:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:25:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:25:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:25:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:25:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:25:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.549 (still bad) 2009-May-17 22:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.548 (still bad) 2009-May-17 22:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.553 (still bad) 2009-May-17 22:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.554 (still bad) 2009-May-17 22:25:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:25:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:25:29 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2009-May-17 22:25:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:25:29 LOG5 end_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2009-May-17 22:25:29 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2009-May-17 22:25:29 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2009-May-17 22:25:29 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2009-May-17 22:25:29 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:25:29 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:25:29 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:25:29 LOG2 antvel: Parameters to Doppler: Topocentric 95129 2009 137 0.0 2009-May-17 22:25:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:25:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2009-May-17 22:25:29 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2009-May-17 22:25:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:25:29 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:25:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2009-May-17 22:25:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:25:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-17 22:25:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:25:29 LOG5 begin_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2009-May-17 22:25:29 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.701905 2009.3776437054782 18.999933 2009-May-17 22:25:29 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333336 7.374444444444442 2009-May-17 22:25:29 LOG4 log_alfabeam: ALFABEAM 1 12.833749194191151 7.457821885677729 2009-May-17 22:25:29 LOG4 log_alfabeam: ALFABEAM 2 12.827160568737069 7.461713342133536 2009-May-17 22:25:29 LOG4 log_alfabeam: ALFABEAM 3 12.822726729878990 7.378531972290133 2009-May-17 22:25:29 LOG4 log_alfabeam: ALFABEAM 4 12.824929599186262 7.290912807002771 2009-May-17 22:25:29 LOG4 log_alfabeam: ALFABEAM 5 12.831542487638519 7.287207888502519 2009-May-17 22:25:29 LOG4 log_alfabeam: ALFABEAM 6 12.835928170485710 7.370934307559229 2009-May-17 22:25:29 INFO2 take_data: Starting WAPP+GALFA scan: 913700243 2009-May-17 22:25:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:25:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:25:30 LOG5 begin_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2009-May-17 22:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.551 (still bad) 2009-May-17 22:25:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:25:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2009-May-17 22:25:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:25:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:25:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:25:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8731.00 2009-May-17 22:25:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:25:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:25:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:25:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:25:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:25:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:25:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:25:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.546 (still bad) 2009-May-17 22:25:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.543 (still bad) 2009-May-17 22:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.543 (still bad) 2009-May-17 22:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.555 (still bad) 2009-May-17 22:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.547 (still bad) 2009-May-17 22:25:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:25:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:25:41 LOG5 end_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2009-May-17 22:25:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:25:41 LOG5 end_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2009-May-17 22:25:41 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2009-May-17 22:25:41 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2009-May-17 22:25:41 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2009-May-17 22:25:41 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:25:41 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:25:41 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:25:41 LOG2 antvel: Parameters to Doppler: Topocentric 95141 2009 137 0.0 2009-May-17 22:25:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:25:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2009-May-17 22:25:41 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2009-May-17 22:25:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:25:41 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:25:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2009-May-17 22:25:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:25:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-17 22:25:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:25:41 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2009-May-17 22:25:41 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.705248 2009.3776440857353 18.999933 2009-May-17 22:25:41 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333331 7.374444444444451 2009-May-17 22:25:41 LOG4 log_alfabeam: ALFABEAM 1 12.833759416276678 7.457701897054269 2009-May-17 22:25:41 LOG4 log_alfabeam: ALFABEAM 2 12.827171249329567 7.461772212886228 2009-May-17 22:25:41 LOG4 log_alfabeam: ALFABEAM 3 12.822727254859318 7.378710828404038 2009-May-17 22:25:41 LOG4 log_alfabeam: ALFABEAM 4 12.824919336581248 7.291032801933179 2009-May-17 22:25:41 LOG4 log_alfabeam: ALFABEAM 5 12.831531728497485 7.287147950403123 2009-May-17 22:25:41 LOG4 log_alfabeam: ALFABEAM 6 12.835927740623134 7.370754380204875 2009-May-17 22:25:41 INFO2 take_data: Starting WAPP+GALFA scan: 913700244 2009-May-17 22:25:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:25:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:25:42 LOG5 begin_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2009-May-17 22:25:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:25:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2009-May-17 22:25:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:25:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:25:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:25:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-May-17 22:25:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.526 1.405 1.360 1.346 2009-May-17 22:25:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.238 1.548 1.396 1.416 2009-May-17 22:25:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.460 1.358 1.375 1.488 2009-May-17 22:25:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.488 0.110 1.294 0.136 2009-May-17 22:25:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8743.00 2009-May-17 22:25:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:25:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:25:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:25:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:25:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:25:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:25:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:25:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:25:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.545 (still bad) 2009-May-17 22:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.545 (still bad) 2009-May-17 22:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.545 (still bad) 2009-May-17 22:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.552 (still bad) 2009-May-17 22:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.545 (still bad) 2009-May-17 22:25:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:25:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:25:53 LOG5 end_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2009-May-17 22:25:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:25:53 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2009-May-17 22:25:53 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2009-May-17 22:25:53 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2009-May-17 22:25:53 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2009-May-17 22:25:53 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:25:53 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:25:53 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:25:53 LOG2 antvel: Parameters to Doppler: Topocentric 95153 2009 137 0.0 2009-May-17 22:25:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:25:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2009-May-17 22:25:53 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2009-May-17 22:25:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:25:53 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:25:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2009-May-17 22:25:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:25:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-May-17 22:25:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-May-17 22:25:53 LOG5 begin_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2009-May-17 22:25:53 LOG5 log_alfabeam: Parameters: 12.829333333333334 7.3744444444444444 13.708590 2009.3776444659923 18.999933 2009-May-17 22:25:53 LOG4 log_alfabeam: ALFABEAM 0 12.829333333333334 7.374444444444459 2009-May-17 22:25:53 LOG4 log_alfabeam: ALFABEAM 1 12.833769573849684 7.457582218698660 2009-May-17 22:25:53 LOG4 log_alfabeam: ALFABEAM 2 12.827181884905109 7.461830509343701 2009-May-17 22:25:53 LOG4 log_alfabeam: ALFABEAM 3 12.822727799026902 7.378888796011765 2009-May-17 22:25:53 LOG4 log_alfabeam: ALFABEAM 4 12.824909138663619 7.291152488979130 2009-May-17 22:25:53 LOG4 log_alfabeam: ALFABEAM 5 12.831521014454086 7.287088596105851 2009-May-17 22:25:53 LOG4 log_alfabeam: ALFABEAM 6 12.835927290863257 7.370575340533151 2009-May-17 22:25:53 INFO2 take_data: Starting WAPP+GALFA scan: 913700245 2009-May-17 22:25:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-17 22:25:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-May-17 22:25:54 LOG5 begin_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2009-May-17 22:25:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-17 22:25:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2009-May-17 22:25:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:25:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:25:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:25:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8755.00 2009-May-17 22:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.542 (still bad) 2009-May-17 22:25:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-May-17 22:25:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1561.801416 MHz 2009-May-17 22:25:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1704.202860 MHz 2009-May-17 22:25:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1911.195348 MHz 2009-May-17 22:25:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1938.585324 MHz 2009-May-17 22:25:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1634.304037 MHz 2009-May-17 22:25:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1886.263532 MHz 2009-May-17 22:25:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1936.727753 MHz 2009-May-17 22:25:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1989.049735 MHz 2009-May-17 22:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.545 (still bad) 2009-May-17 22:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.538 (still bad) 2009-May-17 22:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.538 (still bad) 2009-May-17 22:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.551 (still bad) 2009-May-17 22:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.544 (still bad) 2009-May-17 22:26:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-17 22:26:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-May-17 22:26:05 LOG5 end_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2009-May-17 22:26:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-May-17 22:26:05 LOG5 end_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2009-May-17 22:26:05 INFO2 smartfreq: Switching off CAL 2009-May-17 22:26:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-17 22:26:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-17 22:26:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-17 22:26:05 LOG5 begin_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2009-May-17 22:26:05 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-17 22:26:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-17 22:26:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-17 22:26:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-17 22:26:05 LOG5 end_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2009-May-17 22:26:05 INFO3 restore_frequencies: Restoring original frequencies 2009-May-17 22:26:05 LOG5 antvel: Calling 'antvel 124945.600000 72228.000000 J 0' 2009-May-17 22:26:05 LOG2 antvel: Precessing RA = 12:49:45.6 Dec = +07:22:28.0 Epoch = 2009.37764 J 2009-May-17 22:26:05 LOG2 antvel: Computed apparent RA = 12:50:15.8 Dec = +07:19:15.8 2009-May-17 22:26:05 LOG2 antvel: Parameters to Doppler: Topocentric 95165 2009 137 0.0 2009-May-17 22:26:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-May-17 22:26:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2009-May-17 22:26:05 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2009-May-17 22:26:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-May-17 22:26:05 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-May-17 22:26:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2009-May-17 22:26:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:26:05 STOP finish_task: Finishing task 'smart frequency switching' 2009-May-17 22:26:05 LOG5 finish_task: Level: (2) ID = <10238> Status = 0 0 0 0 ok 2009-May-17 22:26:05 DONE finish_task: DONE finished pattern: smart frequency switching 2009-May-17 22:26:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-17 22:26:05 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-May-17 22:26:05 LOG5 end_task: Level: (2) ID = <10238> Status = 0 0 0 0 ok 2009-May-17 22:26:05 NOTE run_command_file: DONE with command file processing 2009-May-17 22:26:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-May-17 22:26:05 STOP finish_task: Finishing task 'running command file 'command_galfacurpos.cmd'' 2009-May-17 22:26:05 LOG5 finish_task: Level: (1) ID = <10222> Status = 0 0 0 0 ok 2009-May-17 22:26:05 DONE finish_task: DONE finished running: command file 'command_galfacurpos.cmd' 2009-May-17 22:26:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-17 22:26:06 END end_task: Finishing task 'running command file 'command_galfacurpos.cmd'' with status 'OK' 2009-May-17 22:26:06 LOG5 end_task: Level: (1) ID = <10222> Status = 0 0 0 0 ok 2009-May-17 22:26:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2009-May-17 22:26:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-17 22:26:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:26:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.542 (still bad) 2009-May-17 22:26:44 ALERT CIMA-exit_cima: Exiting CIMA ... 2009-May-17 22:26:44 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2009-May-17 22:26:44 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2009-May-17 22:26:44 LOG3 vw_send: To DATATAKING: mvdata a2048 2009-May-17 22:26:44 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2009-May-17 22:26:44 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2009-May-17 22:26:44 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2009-May-17 22:26:44 NOTE CIMA-exit_cima: Cleaning up session ... 2009-May-17 22:26:44 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2009-May-17 22:26:44 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2009-May-17 22:26:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:26:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-17 22:26:46 LOG3 exec_msg: Closing socket