2009-May-11 20:19:17 BEGIN executive: CIMA executive starting ... 2009-May-11 20:19:18 NOTE executive: STARTING NEW CIMA SESSION 2009-May-11 20:19:18 INFO1 executive: Using CIMA version 3.0.10 'normal' from 2008-12-29 17:18 2009-May-11 20:19:18 INFO4 executive: This is an ON-LINE session 2009-May-11 20:19:18 INFO4 executive: This is a REMOTE session 2009-May-11 20:19:18 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-May-11 20:19:18 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'em/th/rm' 2009-May-11 20:19:18 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20090511' 2009-May-11 20:19:18 LOG2 log_preferences: Currently applied preferences: 2009-May-11 20:19:18 LOG2 log_preferences: prefs(dailylog) = daily 2009-May-11 20:19:18 LOG2 log_preferences: prefs(offlinelog) = skip 2009-May-11 20:19:18 LOG2 log_preferences: prefs(datawindow) = ignore 2009-May-11 20:19:18 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-May-11 20:19:18 LOG2 log_preferences: prefs(wappfailure) = abort 2009-May-11 20:19:18 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-May-11 20:19:18 LOG2 log_preferences: prefs(logcolours) = full 2009-May-11 20:19:18 LOG2 log_preferences: prefs(displaylevel) = INFO3 2009-May-11 20:19:18 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-May-11 20:19:18 LOG2 log_preferences: prefs(displayformat) = short 2009-May-11 20:19:18 LOG2 log_preferences: prefs(logformat) = new 2009-May-11 20:19:18 LOG2 log_preferences: prefs(fontsize) = 4 2009-May-11 20:19:18 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-May-11 20:19:18 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2009-May-11 20:19:18 ALERT executive: CIMA executive ready 2009-May-11 20:19:21 NOTE frontend: CIMA frontend ready 2009-May-11 20:19:22 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2009-May-11 20:19:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:19:22 LOG4 got_cormsg: From DATATAKING: setup 2009-May-11 20:19:30 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2009-May-11 20:19:30 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2009-May-11 20:19:30 LOG4 got_cormsg: From DATATAKING: vw% io 2009-May-11 20:19:30 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-May-11 20:19:30 LOG4 got_cormsg: From DATATAKING: 2009-May-11 20:19:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:19:30 LOG4 got_cormsg: From DATATAKING: tape stat 2009-May-11 20:19:30 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-May-11 20:19:30 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-May-11 20:19:30 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-May-11 20:19:30 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-May-11 20:19:30 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-May-11 20:19:30 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-May-11 20:19:30 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-May-11 20:19:30 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-May-11 20:19:30 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-May-11 20:19:30 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-May-11 20:19:30 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-May-11 20:19:30 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2009-May-11 20:19:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:19:30 LOG4 got_cormsg: From DATATAKING: 2009-May-11 20:19:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:20:03 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-May-11 20:20:03 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-May-11 20:20:03 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-May-11 20:20:03 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-May-11 20:20:03 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-May-11 20:20:03 NOTE select_receiver: Starting to select receiver ALFA 2009-May-11 20:20:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-May-11 20:20:03 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2009-May-11 20:20:03 LOG3 vw_send: To DATATAKING: acvlbical off 2009-May-11 20:20:03 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-May-11 20:20:03 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-May-11 20:20:03 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-May-11 20:20:03 DONE finish_task: DONE finished selecting: receiver ALFA 2009-May-11 20:20:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-11 20:20:03 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-May-11 20:20:03 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-May-11 20:20:03 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2009-May-11 20:20:03 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-May-11 20:20:10 LOG4 got_cormsg: From DATATAKING: waiting for turret position:26.64 2009-May-11 20:20:47 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-May-11 20:20:47 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-May-11 20:20:47 LOG5 restart_wapp: Calling 'restart_wapp' 2009-May-11 20:20:47 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-May-11 20:20:47 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-May-11 20:20:47 NOTE restart_wapp: Restarting all WAPPs 2009-May-11 20:20:47 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-May-11 20:20:47 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-May-11 20:20:47 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-May-11 20:20:47 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-May-11 20:20:50 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-May-11 20:20:50 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-May-11 20:20:50 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-May-11 20:20:50 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-May-11 20:22:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:22:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:26:47 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc.cmd ' to executive ... 2009-May-11 20:26:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_ages.conf} 2009-May-11 20:26:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2009-May-11 20:26:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2009-May-11 20:26:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2009-May-11 20:26:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2009-May-11 20:26:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2009-May-11 20:26:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2009-May-11 20:26:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2009-May-11 20:26:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2009-May-11 20:26:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2009-May-11 20:26:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2009-May-11 20:26:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2009-May-11 20:26:47 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2009-May-11 20:26:47 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-May-11 20:26:47 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 13 2009-May-11 20:26:47 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 13' 2009-May-11 20:26:47 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2009-May-11 20:26:47 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-May-11 20:26:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2009-May-11 20:26:47 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2009-May-11 20:26:47 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2009-May-11 20:26:47 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-May-11 20:26:48 NOTE CIMA-check_config_file: File 'togs_ages.conf' contains a observing mode set-up which will be ignored! 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-11 20:26:48 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-May-11 20:26:48 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-May-11 20:26:48 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-May-11 20:26:49 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-May-11 20:26:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-May-11 20:26:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-May-11 20:26:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-May-11 20:26:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-May-11 20:26:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-May-11 20:26:50 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-May-11 20:26:50 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-May-11 20:26:50 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-May-11 20:26:50 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-May-11 20:26:50 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-May-11 20:26:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-May-11 20:26:50 INFO1 config_iflo: Selecting receiver ALFA 2009-May-11 20:26:50 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-May-11 20:26:50 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-May-11 20:26:50 START begin_task: Starting task 'selecting receiver ALFA' 2009-May-11 20:26:50 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-May-11 20:26:50 NOTE select_receiver: Starting to select receiver ALFA 2009-May-11 20:26:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-May-11 20:26:50 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2009-May-11 20:26:50 LOG3 vw_send: To DATATAKING: acvlbical off 2009-May-11 20:26:50 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-May-11 20:26:50 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-May-11 20:26:50 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-May-11 20:26:50 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-May-11 20:26:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 20:26:50 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-May-11 20:26:50 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-May-11 20:26:50 START begin_task: Starting task 'waiting for receiver ALFA' 2009-May-11 20:26:50 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-May-11 20:26:50 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-May-11 20:26:50 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-May-11 20:26:50 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-May-11 20:26:50 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-May-11 20:26:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-May-11 20:26:50 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-May-11 20:26:50 START begin_task: Starting task 'waiting on command to ALFA' 2009-May-11 20:26:50 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-May-11 20:26:50 LOG4 got_alfamon: From ALFAMON: ACK 2009-May-11 20:26:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-May-11 20:26:50 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-May-11 20:26:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-May-11 20:26:50 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-May-11 20:26:50 LOG3 vw_send: To DATATAKING: alfafb 1 2009-May-11 20:26:50 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-May-11 20:26:50 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-May-11 20:26:50 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-May-11 20:26:50 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-May-11 20:26:50 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-May-11 20:26:50 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-May-11 20:26:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2009-May-11 20:26:50 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-May-11 20:26:50 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-May-11 20:26:50 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-May-11 20:26:50 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-May-11 20:26:50 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-May-11 20:26:50 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-May-11 20:26:50 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-May-11 20:26:50 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-May-11 20:26:50 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-May-11 20:26:50 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-May-11 20:26:50 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-May-11 20:26:50 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-May-11 20:26:50 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-May-11 20:26:50 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-May-11 20:26:50 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-May-11 20:26:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-11 20:26:50 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-May-11 20:26:50 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-May-11 20:26:50 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-May-11 20:26:50 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-May-11 20:26:50 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-May-11 20:26:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-May-11 20:26:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-11 20:26:50 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-May-11 20:26:50 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-May-11 20:26:51 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2009-May-11 20:26:51 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-May-11 20:26:51 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-May-11 20:26:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-May-11 20:26:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-May-11 20:26:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-May-11 20:26:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-May-11 20:26:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2009-May-11 20:26:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-May-11 20:26:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-May-11 20:26:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-May-11 20:26:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-May-11 20:26:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-May-11 20:26:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-May-11 20:26:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-May-11 20:26:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-May-11 20:26:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-May-11 20:26:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-May-11 20:26:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-May-11 20:26:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-May-11 20:26:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-May-11 20:26:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-May-11 20:26:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-11 20:26:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:26:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:26:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:26:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:26:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:26:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:27:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:27:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:27:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:27:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:27:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:27:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:27:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:27:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:27:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:27:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:27:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:27:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:27:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:27:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:27:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:27:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:27:07 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-11 20:27:07 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-May-11 20:27:07 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-May-11 20:27:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-May-11 20:27:07 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-May-11 20:27:07 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-May-11 20:27:07 DONE finish_task: DONE finished configuration: IF/LO path 2009-May-11 20:27:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-11 20:27:07 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-May-11 20:27:07 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-May-11 20:27:07 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-May-11 20:27:07 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-May-11 20:27:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-May-11 20:27:07 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-May-11 20:27:07 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-May-11 20:27:07 START begin_task: Starting task 'selecting calibration port' 2009-May-11 20:27:07 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-May-11 20:27:07 LOG3 vw_send: To DATATAKING: calport 3 2009-May-11 20:27:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-May-11 20:27:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-11 20:27:07 START begin_task: Starting task 'waiting on calport' 2009-May-11 20:27:07 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-May-11 20:27:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:27:07 LOG4 got_cormsg: From DATATAKING: calport 3 2009-May-11 20:27:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-11 20:27:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:27:07 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-11 20:27:07 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-May-11 20:27:07 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-May-11 20:27:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-May-11 20:27:07 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-May-11 20:27:07 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-May-11 20:27:07 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-11 20:27:07 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-11 20:27:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-11 20:27:07 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-May-11 20:27:07 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-11 20:27:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:27:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-11 20:27:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-11 20:27:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-11 20:27:07 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-May-11 20:27:07 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-May-11 20:27:07 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-May-11 20:27:07 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-May-11 20:27:07 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-May-11 20:27:07 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-May-11 20:27:07 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-May-11 20:27:07 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-May-11 20:27:07 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-May-11 20:27:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 em/th/rm 2009-May-11 20:27:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 em/th/rm 2009-May-11 20:27:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 em/th/rm 2009-May-11 20:27:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 em/th/rm 2009-May-11 20:27:08 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-May-11 20:27:08 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-May-11 20:27:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-11 20:27:08 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-May-11 20:27:08 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-11 20:27:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-11 20:27:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-11 20:27:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-11 20:27:08 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-May-11 20:27:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 em/th/rm 2009-May-11 20:27:08 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 em/th/rm 2009-May-11 20:27:08 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 em/th/rm 2009-May-11 20:27:08 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 em/th/rm 2009-May-11 20:27:08 STOP finish_task: Finishing task 'configuring WAPPs' 2009-May-11 20:27:08 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-May-11 20:27:08 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-May-11 20:27:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-11 20:27:08 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-May-11 20:27:08 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-May-11 20:27:08 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2009-May-11 20:27:08 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2009-May-11 20:27:08 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2009-May-11 20:27:08 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2009-May-11 20:27:08 INFO5 is_if_valid: Condition parsed as: 1 2009-May-11 20:27:08 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2009-May-11 20:27:08 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2009-May-11 20:27:08 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-May-11 20:27:08 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-May-11 20:27:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-May-11 20:27:08 LOG3 track_source: Calling 'track_source galfasrc 121900.0 +080000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2009-May-11 20:27:08 START begin_task: Starting task 'sending tracking commands' 2009-May-11 20:27:08 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-May-11 20:27:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-May-11 20:27:08 INFO1 track_source: Starting to track galfasrc 2009-May-11 20:27:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-May-11 20:27:08 LOG3 vw_send: To DATATAKING: set ra 121900.0 2009-May-11 20:27:08 LOG3 vw_send: To DATATAKING: set dec +080000 2009-May-11 20:27:08 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-11 20:27:08 LOG3 vw_send: To DATATAKING: pnt tr 121900.0 +080000 -CJ 2009-May-11 20:27:08 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-May-11 20:27:08 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-11 20:27:08 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-May-11 20:27:08 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-11 20:27:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 20:27:09 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-11 20:27:09 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-May-11 20:27:09 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-May-11 20:27:09 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-May-11 20:27:09 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-May-11 20:27:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-11 20:27:09 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-May-11 20:27:09 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-May-11 20:27:09 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2009-May-11 20:27:09 INFO1 run_command_line: Skipping line 'ELSEIF isup(galfasrc2) then' since an earlier condition already has been true 2009-May-11 20:27:09 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2009-May-11 20:27:09 INFO1 run_command_line: Skipping line 'GOTO galfasrc2' in non-true conditional branch 2009-May-11 20:27:09 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2009-May-11 20:27:09 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2009-May-11 20:27:09 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2009-May-11 20:27:09 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2009-May-11 20:27:09 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2009-May-11 20:27:09 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2009-May-11 20:27:09 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2009-May-11 20:27:09 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2009-May-11 20:27:09 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-May-11 20:27:09 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-May-11 20:27:09 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-May-11 20:27:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-May-11 20:27:09 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-May-11 20:27:09 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-May-11 20:27:09 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-May-11 20:27:09 START begin_task: Starting task 'waiting on ALFA rotation' 2009-May-11 20:27:09 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-May-11 20:27:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 em/th/rm' 2009-May-11 20:27:09 NOTE WAPPDATA-new_file: New FITS file: wapp.20090511.a2048.0000.fits 2009-May-11 20:27:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-May-11 20:27:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-May-11 20:27:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-May-11 20:27:09 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090511.a2048.0000.fits} 2009-May-11 20:27:09 LOG4 got_cormsg: From DATATAKING: set ra 121900.0 2009-May-11 20:27:09 LOG4 got_cormsg: From DATATAKING: set dec +080000 2009-May-11 20:27:09 LOG4 got_cormsg: From DATATAKING: vw% 121900.0 2009-May-11 20:27:09 LOG4 got_cormsg: From DATATAKING: vw% +080000 2009-May-11 20:27:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:27:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-11 20:27:09 LOG4 got_cormsg: From DATATAKING: pnt tr 121900.0 +080000 -CJ 2009-May-11 20:27:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-May-11 20:27:09 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-11 20:27:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:27:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 em/th/rm' 2009-May-11 20:29:39 ERROR end_wait_seconds: ERROR timed out while waiting for ALFA rotation! 2009-May-11 20:29:39 LOG1 task_failed: Task 'waiting on ALFA rotation' failed! 2009-May-11 20:29:39 LOG5 task_failed: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-May-11 20:29:39 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'FAILED' 2009-May-11 20:29:39 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 1 failed 2009-May-11 20:29:39 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-11 20:29:39 ALERT rotate_alfa: Current ALFA angle is +30.0 degrees! 2009-May-11 20:29:39 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-May-11 20:29:39 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 1 failed 2009-May-11 20:29:39 ERROR finish_task: ERROR failed configuration: rotating ALFA to +19 degrees 2009-May-11 20:29:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2009-May-11 20:29:39 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'FAILED' 2009-May-11 20:29:39 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 1 failed 2009-May-11 20:29:39 ALERT run_command_file: Stopping command file processing at line 15! 2009-May-11 20:29:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-May-11 20:29:39 STOP finish_task: Finishing task 'running command file 'command_galfasrc.cmd'' 2009-May-11 20:29:39 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 1 failed 2009-May-11 20:29:39 ERROR finish_task: ERROR failed running: command file 'command_galfasrc.cmd' 2009-May-11 20:29:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2009-May-11 20:29:39 END end_task: Finishing task 'running command file 'command_galfasrc.cmd'' with status 'FAILED' 2009-May-11 20:29:39 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 1 failed 2009-May-11 20:31:34 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-May-11 20:31:34 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 15 1 13 2009-May-11 20:31:34 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 15 1 13' 2009-May-11 20:31:34 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2009-May-11 20:31:34 LOG5 begin_task: Level: (1) ID = <10018> Status = 0 0 0 0 ok 2009-May-11 20:31:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2009-May-11 20:31:34 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 15 2009-May-11 20:31:34 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2009-May-11 20:31:34 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-May-11 20:31:34 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-May-11 20:31:34 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2009-May-11 20:31:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-May-11 20:31:34 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-May-11 20:31:34 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-May-11 20:31:34 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-May-11 20:31:34 START begin_task: Starting task 'waiting on ALFA rotation' 2009-May-11 20:31:34 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-May-11 20:34:04 ERROR end_wait_seconds: ERROR timed out while waiting for ALFA rotation! 2009-May-11 20:34:04 LOG1 task_failed: Task 'waiting on ALFA rotation' failed! 2009-May-11 20:34:04 LOG5 task_failed: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-May-11 20:34:04 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'FAILED' 2009-May-11 20:34:04 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 1 failed 2009-May-11 20:34:04 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-11 20:34:04 ALERT rotate_alfa: Current ALFA angle is +30.0 degrees! 2009-May-11 20:34:04 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-May-11 20:34:04 LOG5 finish_task: Level: (2) ID = <10019> Status = 0 0 0 1 failed 2009-May-11 20:34:04 ERROR finish_task: ERROR failed configuration: rotating ALFA to +19 degrees 2009-May-11 20:34:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2009-May-11 20:34:04 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'FAILED' 2009-May-11 20:34:04 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 1 failed 2009-May-11 20:34:04 ALERT run_command_file: Stopping command file processing at line 15! 2009-May-11 20:34:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-May-11 20:34:04 STOP finish_task: Finishing task 'running command file 'command_galfasrc.cmd'' 2009-May-11 20:34:04 LOG5 finish_task: Level: (1) ID = <10018> Status = 0 0 0 1 failed 2009-May-11 20:34:04 ERROR finish_task: ERROR failed running: command file 'command_galfasrc.cmd' 2009-May-11 20:34:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2009-May-11 20:34:04 END end_task: Finishing task 'running command file 'command_galfasrc.cmd'' with status 'FAILED' 2009-May-11 20:34:04 LOG5 end_task: Level: (1) ID = <10018> Status = 0 0 0 1 failed 2009-May-11 20:39:18 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 20:39:18.303 (seconds: 74358.303)!} 2009-May-11 20:39:18 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 20:39:18.303 (seconds: 74358.303)! 2009-May-11 20:46:18 NOTE CIMA-load_config_file: Loading and applying configuration file 'ages_lbw2.conf' 2009-May-11 20:46:20 INFO1 CIMA-find_last_tsys: Last Tsys-values for 'L-Band Wide' is from 2009-May-11 19:17:27 for 'hcorcal': 29.0 K & 27.6 K 2009-May-11 20:46:20 ALERT CIMA-new_receiver: A change between ALFA and another receiver requires a reconfiguration of the WAPPs! 2009-May-11 20:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-May-11 20:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-May-11 20:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "lbw" 2009-May-11 20:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-May-11 20:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-May-11 20:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-May-11 20:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "10GHz to 1500" 2009-May-11 20:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2009-May-11 20:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2009-May-11 20:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2009-May-11 20:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2009-May-11 20:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2009-May-11 20:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2009-May-11 20:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2009-May-11 20:46:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "275" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "275" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "275" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "275" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "1775.000000" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "1775.000000" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "1775.000000" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "1775.000000" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "1775.000000" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "1775.000000" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "1775.000000" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "1775.000000" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "on" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "lbwpol lin" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "lbfb 7" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "F" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "5" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "7 5" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "4" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "11420.405752" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "0" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "0" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "F" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "0" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "1500" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "1500 1500 1500 1500 1500 1500 1500 1500" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "750" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "F" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "5" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "50" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "50" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "25" 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "25" 2009-May-11 20:46:21 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-May-11 20:46:21 LOG4 exec_msg: From OBSERVER: config_iflo 2009-May-11 20:46:21 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-May-11 20:46:22 LOG5 begin_task: Level: (1) ID = <10021> Status = 0 0 0 0 ok 2009-May-11 20:46:22 INFO1 config_iflo: Starting to configure IF/LO path for L-Band Wide 2009-May-11 20:46:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-May-11 20:46:22 INFO1 config_iflo: Selecting receiver L-Band Wide 2009-May-11 20:46:22 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver L-Band Wide} 2009-May-11 20:46:22 LOG1 select_receiver: Calling 'select_receiver lbw no no yes' 2009-May-11 20:46:22 START begin_task: Starting task 'selecting receiver L-Band Wide' 2009-May-11 20:46:22 LOG5 begin_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2009-May-11 20:46:22 NOTE select_receiver: Starting to select receiver L-Band Wide 2009-May-11 20:46:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver L-Band Wide ...} 2009-May-11 20:46:22 LOG3 vw_send: To DATATAKING: setupall 5 1400.0 2009-May-11 20:46:22 LOG3 vw_send: To DATATAKING: acvlbical off 2009-May-11 20:46:22 INFO1 select_receiver: Re-selecting source galfasrc 2009-May-11 20:46:22 LOG3 track_source: Calling 'track_source galfasrc 121900.000000 80000.000000 J 0.000000 0.000000 H - /share/obs4/usr/a2048/togs_ages.cat 0.000000 Topocentric velocity(optical)' 2009-May-11 20:46:22 START begin_task: Starting task 'sending tracking commands' 2009-May-11 20:46:22 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2009-May-11 20:46:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-May-11 20:46:22 INFO1 track_source: Starting to track galfasrc 2009-May-11 20:46:22 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-May-11 20:46:22 LOG3 vw_send: To DATATAKING: set ra 121900.000000 2009-May-11 20:46:22 LOG3 vw_send: To DATATAKING: set dec 80000.000000 2009-May-11 20:46:22 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-11 20:46:22 LOG3 vw_send: To DATATAKING: pnt tr 121900.000000 80000.000000 -CJ 2009-May-11 20:46:22 LOG3 vw_send: To DATATAKING: dopsetvel 0.000000 topo 2009-May-11 20:46:22 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-11 20:46:22 LOG5 finish_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2009-May-11 20:46:22 INFO3 finish_task: DONE finished sending: tracking commands 2009-May-11 20:46:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 20:46:22 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-11 20:46:22 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2009-May-11 20:46:22 STOP finish_task: Finishing task 'selecting receiver L-Band Wide' 2009-May-11 20:46:22 LOG5 finish_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2009-May-11 20:46:22 INFO2 finish_task: DONE finished selecting: receiver L-Band Wide 2009-May-11 20:46:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 20:46:22 STOP end_task: Finishing task 'selecting receiver L-Band Wide' with status 'OK' 2009-May-11 20:46:22 LOG5 end_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2009-May-11 20:46:22 START begin_task: Starting task 'waiting for receiver L-Band Wide' 2009-May-11 20:46:22 LOG5 begin_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2009-May-11 20:46:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 131.4 BITMAP stat_alfa_rot INFO {Waiting on rotating floor} 2009-May-11 20:46:23 START begin_task: Starting task 'waiting on waiting for receiver rotation' 2009-May-11 20:46:23 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2009-May-11 20:46:23 LOG4 got_cormsg: From DATATAKING: setupall 5 1400.0 2009-May-11 20:46:23 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-May-11 20:46:23 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-May-11 20:46:23 LOG4 got_cormsg: From DATATAKING: set ra 121900.000000 2009-May-11 20:46:23 LOG4 got_cormsg: From DATATAKING: set dec 80000.000000 2009-May-11 20:46:23 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-11 20:46:23 LOG4 got_cormsg: From DATATAKING: pnt tr 121900.000000 80000.000000 -CJ 2009-May-11 20:46:23 LOG4 got_cormsg: From DATATAKING: dopsetvel 0.000000 topo 2009-May-11 20:46:36 LOG4 got_cormsg: From DATATAKING: waiting for turret position:285.79 2009-May-11 20:48:32 LOG4 got_cormsg: From DATATAKING: settinng up if2 2009-May-11 20:48:32 LOG4 got_cormsg: From DATATAKING: setting up if1lo 2009-May-11 20:48:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:48:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:48:32 LOG4 got_cormsg: From DATATAKING: vw% 121900.000000 2009-May-11 20:48:32 LOG4 got_cormsg: From DATATAKING: vw% 80000.000000 2009-May-11 20:48:32 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2009-May-11 20:48:35 STOP end_task: Finishing task 'waiting on waiting for receiver rotation' with status 'OK' 2009-May-11 20:48:35 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2009-May-11 20:48:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT 2009-May-11 20:48:35 STOP end_task: Finishing task 'waiting for receiver L-Band Wide' with status 'OK' 2009-May-11 20:48:35 LOG5 end_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2009-May-11 20:48:35 LOG4 send_obs_status: To obs_status: <1> MESSAGE {Re-selecting source galfasrc} 2009-May-11 20:48:35 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-May-11 20:48:35 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-May-11 20:48:35 LOG3 vw_send: To DATATAKING: lbwpol lin 2009-May-11 20:48:35 LOG3 vw_send: To DATATAKING: lbfb 7 2009-May-11 20:48:35 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-May-11 20:48:35 LOG3 send_ifx: Skipping if1-command 'if1_shcl F' since system already is properly set 2009-May-11 20:48:35 LOG3 send_ifx: Skipping if1-command 'if1_rfnum 5' since system already is properly set 2009-May-11 20:48:35 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-May-11 20:48:35 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 7 5' since system already is properly set 2009-May-11 20:48:35 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 4} 2009-May-11 20:48:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11420405752.0} 2009-May-11 20:48:35 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-May-11 20:48:35 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-May-11 20:48:35 LOG3 send_ifx: Skipping if1-command 'if1_ac2sw 0' since system already is properly set 2009-May-11 20:48:35 LOG3 vw_send: To DATATAKING: if1 {if1_phbsig 0} 2009-May-11 20:48:35 LOG3 send_ifx: Skipping if1-command 'if1_hybrid F' since system already is properly set 2009-May-11 20:48:35 LOG3 send_ifx: Skipping if1-command 'if1_phblo 0' since system already is properly set 2009-May-11 20:48:35 LOG3 send_ifx: Skipping if1-command 'if1_750nb F' since system already is properly set 2009-May-11 20:48:35 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-May-11 20:48:35 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 5' since system already is properly set 2009-May-11 20:48:35 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-May-11 20:48:35 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-May-11 20:48:35 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-May-11 20:48:35 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq 1500} 2009-May-11 20:48:35 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 1500 1500 1500 1500 1500 1500 1500 1500} 2009-May-11 20:48:35 LOG3 send_ifx: Skipping if2-command 'if2_vlbainp 750' since system already is properly set 2009-May-11 20:48:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2009-May-11 20:48:35 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-May-11 20:48:35 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-May-11 20:48:35 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-May-11 20:48:35 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-May-11 20:48:35 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-May-11 20:48:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-May-11 20:48:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-11 20:48:35 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-May-11 20:48:35 LOG5 begin_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2009-May-11 20:48:35 LOG4 got_cormsg: From DATATAKING: lbwpol lin 2009-May-11 20:48:35 LOG4 got_cormsg: From DATATAKING: lbfb 7 2009-May-11 20:48:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 4} 2009-May-11 20:48:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11420405752.0} 2009-May-11 20:48:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_phbsig 0} 2009-May-11 20:48:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-May-11 20:48:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq 1500} 2009-May-11 20:48:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 1500 1500 1500 1500 1500 1500 1500 1500} 2009-May-11 20:48:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2009-May-11 20:48:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:48:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-11 20:48:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:48:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:48:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:48:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:48:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:48:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:48:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:48:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:48:40 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-11 20:48:40 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-May-11 20:48:40 LOG5 end_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2009-May-11 20:48:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-May-11 20:48:40 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-May-11 20:48:40 LOG5 finish_task: Level: (1) ID = <10021> Status = 0 0 0 0 ok 2009-May-11 20:48:40 DONE finish_task: DONE finished configuration: IF/LO path 2009-May-11 20:48:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-11 20:48:40 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-May-11 20:48:40 LOG5 end_task: Level: (1) ID = <10021> Status = 0 0 0 0 ok 2009-May-11 20:48:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:48:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-May-11 20:48:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-May-11 20:48:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-May-11 20:48:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-May-11 20:48:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "1 chan, 9-level, pol a" 2009-May-11 20:48:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "1 chan, 9-level, pol b" 2009-May-11 20:48:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "1 chan, 9-level, pol a" 2009-May-11 20:48:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "1 chan, 9-level, pol b" 2009-May-11 20:48:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "50" 2009-May-11 20:48:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "50" 2009-May-11 20:48:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "25" 2009-May-11 20:48:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "25" 2009-May-11 20:48:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-May-11 20:48:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "0" 2009-May-11 20:48:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "0" 2009-May-11 20:48:40 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-May-11 20:48:40 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-May-11 20:48:40 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-May-11 20:48:40 LOG5 begin_task: Level: (1) ID = <10027> Status = 0 0 0 0 ok 2009-May-11 20:48:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-May-11 20:48:40 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-May-11 20:48:40 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-May-11 20:48:40 START begin_task: Starting task 'selecting calibration port' 2009-May-11 20:48:40 LOG5 begin_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2009-May-11 20:48:40 LOG3 vw_send: To DATATAKING: calport 3 2009-May-11 20:48:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-May-11 20:48:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-11 20:48:40 START begin_task: Starting task 'waiting on calport' 2009-May-11 20:48:40 LOG5 begin_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2009-May-11 20:48:41 LOG4 got_cormsg: From DATATAKING: calport 3 2009-May-11 20:48:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-11 20:48:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:48:41 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-11 20:48:41 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-May-11 20:48:41 LOG5 end_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2009-May-11 20:48:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-May-11 20:48:41 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-May-11 20:48:41 LOG5 end_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2009-May-11 20:48:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-11 20:48:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-11 20:48:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-11 20:48:41 LOG5 begin_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2009-May-11 20:48:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:48:41 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-11 20:48:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-11 20:48:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-11 20:48:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-11 20:48:41 LOG5 end_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2009-May-11 20:48:41 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-May-11 20:48:41 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-May-11 20:48:41 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-May-11 20:48:41 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-May-11 20:48:41 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-May-11 20:48:41 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-May-11 20:48:41 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-May-11 20:48:41 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-May-11 20:48:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 em/th/rm 2009-May-11 20:48:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 em/th/rm 2009-May-11 20:48:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 em/th/rm 2009-May-11 20:48:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 em/th/rm 2009-May-11 20:48:41 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-May-11 20:48:41 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-May-11 20:48:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-11 20:48:41 LOG5 begin_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2009-May-11 20:48:41 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-11 20:48:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-11 20:48:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-11 20:48:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-11 20:48:41 LOG5 end_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2009-May-11 20:48:41 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-May-11 20:48:41 STOP finish_task: Finishing task 'configuring WAPPs' 2009-May-11 20:48:41 LOG5 finish_task: Level: (1) ID = <10027> Status = 0 0 0 0 ok 2009-May-11 20:48:41 DONE finish_task: DONE finished configuring: the WAPPs in single board mode 2009-May-11 20:48:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-11 20:48:41 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-May-11 20:48:41 LOG5 end_task: Level: (1) ID = <10027> Status = 0 0 0 0 ok 2009-May-11 20:48:41 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-May-11 20:48:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-May-11 20:48:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-May-11 20:48:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 em/th/rm' 2009-May-11 20:48:43 NOTE CIMA-load_config_file: Configuration file 'ages_lbw2.conf' applied. 2009-May-11 20:49:09 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-May-11 20:49:10 LOG4 exec_msg: From OBSERVER: track_new_source AGESVC_17 122323.7 070908 J 0 0 main small /share/obs4/usr/a2048/VCfollowup2.cat 7207 Heliocentric velocity(optical) 0 0 0.0 0.0 0 2009-May-11 20:49:10 LOG1 track_new_source: Calling 'track_new_source AGESVC_17 122323.7 070908 J 0 0 main small /share/obs4/usr/a2048/VCfollowup2.cat 7207 Heliocentric velocity(optical) 0 0 0.0 0.0 0' 2009-May-11 20:49:10 BEGIN begin_task: Starting task 'selecting new source' 2009-May-11 20:49:10 LOG5 begin_task: Level: (1) ID = <10032> Status = 0 0 0 0 ok 2009-May-11 20:49:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC_17} INFO {Selecting source 'AGESVC_17' ...} 2009-May-11 20:49:10 LOG3 track_source: Calling 'track_source AGESVC_17 122323.7 070908 J 0 0 main small /share/obs4/usr/a2048/VCfollowup2.cat 7207 Heliocentric velocity(optical)' 2009-May-11 20:49:10 START begin_task: Starting task 'sending tracking commands' 2009-May-11 20:49:10 LOG5 begin_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2009-May-11 20:49:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC_17} INFO {Slewing to source 'AGESVC_17' ...} 2009-May-11 20:49:10 INFO1 track_source: Starting to track AGESVC_17 2009-May-11 20:49:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC_17" 2009-May-11 20:49:10 LOG3 vw_send: To DATATAKING: set ra 122323.7 2009-May-11 20:49:10 LOG3 vw_send: To DATATAKING: set dec 070908 2009-May-11 20:49:10 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-11 20:49:10 LOG3 vw_send: To DATATAKING: pnt tr 122323.7 070908 -CJ 2009-May-11 20:49:10 LOG3 vw_send: To DATATAKING: dopsetvel 7207 hel 2009-May-11 20:49:10 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-11 20:49:10 LOG5 finish_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2009-May-11 20:49:10 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-11 20:49:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 20:49:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-11 20:49:10 LOG5 end_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2009-May-11 20:49:10 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2009-May-11 20:49:10 START begin_task: Starting task 'applying pointing corrections' 2009-May-11 20:49:10 LOG5 begin_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2009-May-11 20:49:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-May-11 20:49:10 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-May-11 20:49:10 STOP finish_task: Finishing task 'applying pointing corrections' 2009-May-11 20:49:10 LOG5 finish_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2009-May-11 20:49:10 INFO2 finish_task: DONE finished applying: pointing corrections 2009-May-11 20:49:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 20:49:10 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-May-11 20:49:10 LOG5 end_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2009-May-11 20:49:10 STOP finish_task: Finishing task 'selecting new source' 2009-May-11 20:49:10 LOG5 finish_task: Level: (1) ID = <10032> Status = 0 0 0 0 ok 2009-May-11 20:49:10 DONE finish_task: DONE finished selecting: new source 2009-May-11 20:49:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-11 20:49:10 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-May-11 20:49:10 LOG5 end_task: Level: (1) ID = <10032> Status = 0 0 0 0 ok 2009-May-11 20:49:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC_17" 2009-May-11 20:49:10 LOG4 got_cormsg: From DATATAKING: set ra 122323.7 2009-May-11 20:49:10 LOG4 got_cormsg: From DATATAKING: set dec 070908 2009-May-11 20:49:10 LOG4 got_cormsg: From DATATAKING: vw% 122323.7 2009-May-11 20:49:10 LOG4 got_cormsg: From DATATAKING: vw% 070908 2009-May-11 20:49:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:49:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-11 20:49:10 LOG4 got_cormsg: From DATATAKING: pnt tr 122323.7 070908 -CJ 2009-May-11 20:49:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 7207 hel 2009-May-11 20:49:10 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2009-May-11 20:49:10 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-May-11 20:49:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:49:25 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2009-May-11 20:49:25 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 each first 0 2009-May-11 20:49:25 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 each first 0' 2009-May-11 20:49:25 BEGIN begin_task: Starting task 'standard on/off' 2009-May-11 20:49:25 LOG5 begin_task: Level: (1) ID = <10035> Status = 0 0 0 0 ok 2009-May-11 20:49:25 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'AGESVC_17' 2009-May-11 20:49:25 INFO1 onoff_wapp: Starting pattern: Standard on/off 2009-May-11 20:49:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2009-May-11 20:49:25 START begin_task: Starting task 'waiting on telescope' 2009-May-11 20:49:25 LOG5 begin_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2009-May-11 20:49:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-11 20:49:25 LOG3 waittrk: Start waittrk 5 2009-May-11 20:49:25 START begin_task: Starting task 'waiting on telescope movement' 2009-May-11 20:49:25 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-May-11 20:49:30 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-11 20:49:30 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-May-11 20:49:30 START begin_task: Starting task 'waiting on telescope on source' 2009-May-11 20:49:30 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2009-May-11 20:49:50 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-11 20:49:50 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2009-May-11 20:49:50 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-11 20:49:50 INFO2 waittrk: Now tracking AGESVC_17 2009-May-11 20:49:50 LOG4 waittrk: Current telescope position: Az = 316.49 ZA = 15.07 2009-May-11 20:49:50 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-11 20:49:50 LOG5 finish_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2009-May-11 20:49:50 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-11 20:49:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 20:49:50 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-11 20:49:50 LOG5 end_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2009-May-11 20:49:50 START begin_task: Starting task 'selecting calibration type' 2009-May-11 20:49:50 LOG5 begin_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2009-May-11 20:49:50 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-11 20:49:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-11 20:49:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-11 20:49:50 START begin_task: Starting task 'waiting on setcal' 2009-May-11 20:49:50 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2009-May-11 20:49:50 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-11 20:49:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-11 20:49:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:49:50 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-11 20:49:50 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-11 20:49:50 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2009-May-11 20:49:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-11 20:49:50 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-11 20:49:50 LOG5 end_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2009-May-11 20:49:50 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 em/th/rm 2009-May-11 20:49:50 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 em/th/rm 2009-May-11 20:49:50 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 em/th/rm 2009-May-11 20:49:50 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 em/th/rm 2009-May-11 20:49:50 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090511.a2048.0000.fits' is empty! 2009-May-11 20:49:50 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2009-May-11 20:49:50 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2009-May-11 20:49:50 START begin_task: Starting task 'clearing telescope offsets' 2009-May-11 20:49:50 LOG5 begin_task: Level: (2) ID = <10041> Status = 0 0 0 0 ok 2009-May-11 20:49:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2009-May-11 20:49:50 INFO3 clear_offsets: Removing telescope offsets 2009-May-11 20:49:50 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC_17" 2009-May-11 20:49:50 LOG3 vw_send: To DATATAKING: pnt tr 122323.700000 70908.000000 -CJ 2009-May-11 20:49:50 STOP finish_task: Finishing task 'clearing telescope offsets' 2009-May-11 20:49:50 LOG5 finish_task: Level: (2) ID = <10041> Status = 0 0 0 0 ok 2009-May-11 20:49:50 INFO2 finish_task: DONE finished clearing: telescope offsets 2009-May-11 20:49:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 20:49:50 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2009-May-11 20:49:50 LOG5 end_task: Level: (2) ID = <10041> Status = 0 0 0 0 ok 2009-May-11 20:49:50 START begin_task: Starting task 'waiting on telescope' 2009-May-11 20:49:50 LOG5 begin_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2009-May-11 20:49:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-11 20:49:50 LOG3 waittrk: Start waittrk 5 2009-May-11 20:49:50 START begin_task: Starting task 'waiting on telescope movement' 2009-May-11 20:49:50 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-May-11 20:49:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:49:50 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC_17" 2009-May-11 20:49:50 LOG4 got_cormsg: From DATATAKING: pnt tr 122323.700000 70908.000000 -CJ 2009-May-11 20:49:50 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-11 20:49:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 em/th/rm' 2009-May-11 20:49:55 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-11 20:49:55 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-May-11 20:49:55 START begin_task: Starting task 'waiting on telescope on source' 2009-May-11 20:49:55 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2009-May-11 20:49:58 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-11 20:49:58 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2009-May-11 20:49:58 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-11 20:49:58 INFO2 waittrk: Now tracking AGESVC_17 2009-May-11 20:49:58 LOG4 waittrk: Current telescope position: Az = 316.59 ZA = 15.05 2009-May-11 20:49:58 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-11 20:49:58 LOG5 finish_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2009-May-11 20:49:58 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-11 20:49:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 20:49:58 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-11 20:49:58 LOG5 end_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2009-May-11 20:49:58 LOG5 antvel: Calling 'antvel 122323.700000 70908.000000 J 0' 2009-May-11 20:49:58 LOG2 antvel: Precessing RA = 12:23:23.7 Dec = +07:09:08.0 Epoch = 2009.36103 J 2009-May-11 20:49:58 LOG2 antvel: Computed apparent RA = 12:23:54.0 Dec = +07:05:52.5 2009-May-11 20:49:58 LOG2 antvel: Parameters to Doppler: Heliocentric 89397 2009 131 0.0 2009-May-11 20:49:58 INFO5 antvel: Computed antenna velocity: +21.57049 km/s 2009-May-11 20:49:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=7207.000000 veltype=velocity(optical) calctype=SUBBAND antvel=21.570488709999999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-May-11 20:49:58 INFO4 dopset_gen: New sky frequencies: 1386.961064 1386.961064 1386.961064 1386.961064 1386.961064 1386.961064 1386.961064 1386.961064 1386.961064 2009-May-11 20:49:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.961064 sky0=1386.961064 sky1=1386.961064 sky2=1386.961064 sky3=1386.961064 sky4=1386.961064 sky5=1386.961064 sky6=1386.961064 sky7=1386.961064 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2009-May-11 20:49:58 LOG2 dopset_gen: Result from 'sky2syn': 11386.961064 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2009-May-11 20:49:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11386961064.0} 2009-May-11 20:49:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2009-May-11 20:49:58 START begin_task: Starting task 'adjusting WAPP power' 2009-May-11 20:49:58 LOG5 begin_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2009-May-11 20:49:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-May-11 20:49:58 INFO2 adjust_power: Starting to adjust WAPP power 2009-May-11 20:49:58 LOG3 vw_send: To DATATAKING: adjpwrif1 2009-May-11 20:49:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2009-May-11 20:49:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-11 20:49:58 START begin_task: Starting task 'waiting on adjpwrif1' 2009-May-11 20:49:58 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-May-11 20:49:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11386961064.0} 2009-May-11 20:49:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2009-May-11 20:49:58 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2009-May-11 20:49:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-11 20:49:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:49:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:50:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:50:01 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-11 20:50:01 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2009-May-11 20:50:01 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-May-11 20:50:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2009-May-11 20:50:01 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-May-11 20:50:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-May-11 20:50:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-11 20:50:01 START begin_task: Starting task 'waiting on adjpwrif2' 2009-May-11 20:50:01 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2009-May-11 20:50:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:50:01 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-May-11 20:50:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-11 20:50:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:50:02 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-11 20:50:02 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-May-11 20:50:02 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2009-May-11 20:50:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-May-11 20:50:02 START begin_task: Starting task 'adjusting WAPP power' 2009-May-11 20:50:02 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-May-11 20:50:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-May-11 20:50:02 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2009-May-11 20:50:02 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2009-May-11 20:50:02 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2009-May-11 20:50:02 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2009-May-11 20:50:02 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-May-11 20:50:02 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-May-11 20:50:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 20:50:03 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 12 7 dB 2009-May-11 20:50:03 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2009-May-11 20:50:03 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2009-May-11 20:50:03 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2009-May-11 20:50:03 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2009-May-11 20:50:03 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 15 7 dB 2009-May-11 20:50:03 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 7 12 dB 2009-May-11 20:50:03 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 7 15 dB 2009-May-11 20:50:03 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-May-11 20:50:03 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-May-11 20:50:03 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-May-11 20:50:03 INFO2 wapp_adjpwr: WAPP power: 1.023 1.076 0.901 1.023 2009-May-11 20:50:03 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-11 20:50:03 LOG5 finish_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-May-11 20:50:03 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-May-11 20:50:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 20:50:03 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-11 20:50:03 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-May-11 20:50:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-11 20:50:03 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-11 20:50:03 LOG5 finish_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2009-May-11 20:50:03 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-May-11 20:50:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 20:50:03 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-11 20:50:03 LOG5 end_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2009-May-11 20:50:03 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2009-May-11 20:50:03 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON -' 2009-May-11 20:50:03 START begin_task: Starting task 'WAPP spectral observation' 2009-May-11 20:50:03 LOG5 begin_task: Level: (2) ID = <10050> Status = 0 0 0 0 ok 2009-May-11 20:50:03 INFO2 take_data: Starting WAPP scan: 913100166 2009-May-11 20:50:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 2009-May-11 20:50:04 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-11 20:50:04 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2009-May-11 20:50:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-11 20:50:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3005.00 2009-May-11 20:50:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11386.961064 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2009-May-11 20:50:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.961064 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 20:50:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.961064 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 20:50:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.961064 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 20:50:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.961064 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 20:55:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-11 20:55:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-11 20:55:05 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2009-May-11 20:55:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-11 20:55:05 LOG5 end_task: Level: (2) ID = <10050> Status = 0 0 0 0 ok 2009-May-11 20:55:05 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2009-May-11 20:55:05 LOG2 onoff_wapp: Parameters: RA-offset: -90.95729999999925 arcminutes wait: 60 secs 2009-May-11 20:55:05 LOG4 track_offsets: Calling 'track_offsets -90.95729999999925 0.0 main small' 2009-May-11 20:55:05 START begin_task: Starting task 'sending telescope offsets' 2009-May-11 20:55:05 LOG5 begin_task: Level: (2) ID = <10052> Status = 0 0 0 0 ok 2009-May-11 20:55:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2009-May-11 20:55:05 INFO2 track_offsets: Starting to send new offsets 2009-May-11 20:55:05 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC_17" 2009-May-11 20:55:05 LOG3 vw_send: To DATATAKING: pnt tr 122323.700000 70908.000000 -CJ -o -UD -1.51595 0.0 -CH 2009-May-11 20:55:05 STOP finish_task: Finishing task 'sending telescope offsets' 2009-May-11 20:55:05 LOG5 finish_task: Level: (2) ID = <10052> Status = 0 0 0 0 ok 2009-May-11 20:55:05 INFO2 finish_task: DONE finished sending: telescope offsets 2009-May-11 20:55:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 20:55:05 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2009-May-11 20:55:05 LOG5 end_task: Level: (2) ID = <10052> Status = 0 0 0 0 ok 2009-May-11 20:55:05 INFO2 lstwait: Waiting for 59.8 secs from LST 11:47:49 to LST 11:48:49 ... 2009-May-11 20:55:05 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836176000002972 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-11 20:55:05 START begin_task: Starting task 'waiting on wait on LST' 2009-May-11 20:55:05 LOG5 begin_task: Level: (2) ID = <10053> Status = 0 0 0 0 ok 2009-May-11 20:55:05 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC_17" 2009-May-11 20:55:05 LOG4 got_cormsg: From DATATAKING: pnt tr 122323.700000 70908.000000 -CJ -o -UD -1.51595 0.0 -CH 2009-May-11 20:55:05 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-11 20:55:37 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'AGESVC_17' (after 32 seconds) 2009-May-11 20:56:05 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-May-11 20:56:05 LOG5 end_task: Level: (2) ID = <10053> Status = 0 0 0 0 ok 2009-May-11 20:56:05 LOG4 lstwait: Finished waiting 0.16 seconds late 2009-May-11 20:56:05 INFO3 lstwait: Finished waiting 2009-May-11 20:56:05 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-11 20:56:05 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2009-May-11 20:56:05 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF -' 2009-May-11 20:56:05 START begin_task: Starting task 'WAPP spectral observation' 2009-May-11 20:56:05 LOG5 begin_task: Level: (2) ID = <10054> Status = 0 0 0 0 ok 2009-May-11 20:56:05 INFO2 take_data: Starting WAPP scan: 913100167 2009-May-11 20:56:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 2009-May-11 20:56:06 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-11 20:56:06 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2009-May-11 20:56:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-11 20:56:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3367.00 2009-May-11 20:56:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11386.961064 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2009-May-11 20:56:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.961064 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 20:56:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.961064 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 20:56:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.961064 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 20:56:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.961064 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 20:59:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999965 diff = 1)! 2009-May-11 20:59:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999965 diff = 1)! 2009-May-11 20:59:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999965 diff = 1)! 2009-May-11 21:01:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-11 21:01:07 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-11 21:01:07 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2009-May-11 21:01:07 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-11 21:01:07 LOG5 end_task: Level: (2) ID = <10054> Status = 0 0 0 0 ok 2009-May-11 21:01:07 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2009-May-11 21:01:07 START begin_task: Starting task 'WAPP calibration' 2009-May-11 21:01:07 LOG5 begin_task: Level: (2) ID = <10056> Status = 0 0 0 0 ok 2009-May-11 21:01:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-May-11 21:01:07 START begin_task: Starting task 'selecting calibration type' 2009-May-11 21:01:07 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2009-May-11 21:01:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-11 21:01:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-11 21:01:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:01:07 START begin_task: Starting task 'waiting on setcal' 2009-May-11 21:01:07 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2009-May-11 21:01:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-11 21:01:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:01:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:01:07 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-11 21:01:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-11 21:01:07 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2009-May-11 21:01:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-11 21:01:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-11 21:01:07 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2009-May-11 21:01:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-May-11 21:01:07 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-May-11 21:01:07 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-May-11 21:01:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-11 21:01:07 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2009-May-11 21:01:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:01:07 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-11 21:01:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-May-11 21:01:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-11 21:01:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-11 21:01:07 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2009-May-11 21:01:08 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-May-11 21:01:08 LOG4 take_data: Calling 'take_data 10 10 CAL ON -' 2009-May-11 21:01:08 START begin_task: Starting task 'WAPP spectral observation' 2009-May-11 21:01:08 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-May-11 21:01:08 INFO2 take_data: Starting WAPP scan: 913100168 2009-May-11 21:01:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-11 21:01:08 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-11 21:01:08 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2009-May-11 21:01:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-11 21:01:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3669.00 2009-May-11 21:01:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11386.961064 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2009-May-11 21:01:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.961064 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:01:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.961064 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:01:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.961064 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:01:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.961064 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:01:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-11 21:01:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-11 21:01:19 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2009-May-11 21:01:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-11 21:01:19 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-May-11 21:01:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-May-11 21:01:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-11 21:01:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-11 21:01:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-11 21:01:19 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2009-May-11 21:01:19 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-11 21:01:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-11 21:01:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-11 21:01:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-11 21:01:19 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2009-May-11 21:01:19 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-May-11 21:01:19 LOG4 take_data: Calling 'take_data 10 10 CAL OFF -' 2009-May-11 21:01:19 START begin_task: Starting task 'WAPP spectral observation' 2009-May-11 21:01:19 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-May-11 21:01:19 INFO2 take_data: Starting WAPP scan: 913100169 2009-May-11 21:01:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-11 21:01:20 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-11 21:01:20 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-May-11 21:01:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-11 21:01:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3681.00 2009-May-11 21:01:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11386.961064 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2009-May-11 21:01:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.961064 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:01:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.961064 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:01:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.961064 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:01:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.961064 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:01:31 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-May-11 21:01:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-11 21:01:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-11 21:01:31 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-May-11 21:01:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-11 21:01:31 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-May-11 21:01:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-11 21:01:31 STOP finish_task: Finishing task 'WAPP calibration' 2009-May-11 21:01:31 LOG5 finish_task: Level: (2) ID = <10056> Status = 0 0 0 0 ok 2009-May-11 21:01:31 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-May-11 21:01:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:01:31 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-May-11 21:01:31 LOG5 end_task: Level: (2) ID = <10056> Status = 0 0 0 0 ok 2009-May-11 21:01:31 START begin_task: Starting task 'clearing telescope offsets' 2009-May-11 21:01:31 LOG5 begin_task: Level: (2) ID = <10065> Status = 0 0 0 0 ok 2009-May-11 21:01:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2009-May-11 21:01:31 INFO3 clear_offsets: Removing telescope offsets 2009-May-11 21:01:31 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC_17" 2009-May-11 21:01:31 LOG3 vw_send: To DATATAKING: pnt tr 122323.700000 70908.000000 -CJ 2009-May-11 21:01:31 STOP finish_task: Finishing task 'clearing telescope offsets' 2009-May-11 21:01:31 LOG5 finish_task: Level: (2) ID = <10065> Status = 0 0 0 0 ok 2009-May-11 21:01:31 INFO2 finish_task: DONE finished clearing: telescope offsets 2009-May-11 21:01:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:01:31 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2009-May-11 21:01:31 LOG5 end_task: Level: (2) ID = <10065> Status = 0 0 0 0 ok 2009-May-11 21:01:31 STOP finish_task: Finishing task 'standard on/off' 2009-May-11 21:01:31 LOG5 finish_task: Level: (1) ID = <10035> Status = 0 0 0 0 ok 2009-May-11 21:01:31 DONE finish_task: DONE finished pattern: standard on/off 2009-May-11 21:01:31 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-11 21:01:31 END end_task: Finishing task 'standard on/off' with status 'OK' 2009-May-11 21:01:31 LOG5 end_task: Level: (1) ID = <10035> Status = 0 0 0 0 ok 2009-May-11 21:01:31 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC_17" 2009-May-11 21:01:31 LOG4 got_cormsg: From DATATAKING: pnt tr 122323.700000 70908.000000 -CJ 2009-May-11 21:01:31 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-11 21:01:52 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-May-11 21:01:52 LOG4 exec_msg: From OBSERVER: track_new_source AGESVC_29 122829.4 074153 J 0 0 main small /share/obs4/usr/a2048/VCfollowup2.cat 6411 Heliocentric velocity(optical) 0 0 0.0 0.0 0 2009-May-11 21:01:52 LOG1 track_new_source: Calling 'track_new_source AGESVC_29 122829.4 074153 J 0 0 main small /share/obs4/usr/a2048/VCfollowup2.cat 6411 Heliocentric velocity(optical) 0 0 0.0 0.0 0' 2009-May-11 21:01:52 BEGIN begin_task: Starting task 'selecting new source' 2009-May-11 21:01:52 LOG5 begin_task: Level: (1) ID = <10066> Status = 0 0 0 0 ok 2009-May-11 21:01:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC_29} INFO {Selecting source 'AGESVC_29' ...} 2009-May-11 21:01:52 LOG3 track_source: Calling 'track_source AGESVC_29 122829.4 074153 J 0 0 main small /share/obs4/usr/a2048/VCfollowup2.cat 6411 Heliocentric velocity(optical)' 2009-May-11 21:01:52 START begin_task: Starting task 'sending tracking commands' 2009-May-11 21:01:52 LOG5 begin_task: Level: (2) ID = <10067> Status = 0 0 0 0 ok 2009-May-11 21:01:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC_29} INFO {Slewing to source 'AGESVC_29' ...} 2009-May-11 21:01:52 INFO1 track_source: Starting to track AGESVC_29 2009-May-11 21:01:52 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC_29" 2009-May-11 21:01:52 LOG3 vw_send: To DATATAKING: set ra 122829.4 2009-May-11 21:01:52 LOG3 vw_send: To DATATAKING: set dec 074153 2009-May-11 21:01:52 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-11 21:01:52 LOG3 vw_send: To DATATAKING: pnt tr 122829.4 074153 -CJ 2009-May-11 21:01:52 LOG3 vw_send: To DATATAKING: dopsetvel 6411 hel 2009-May-11 21:01:52 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-11 21:01:52 LOG5 finish_task: Level: (2) ID = <10067> Status = 0 0 0 0 ok 2009-May-11 21:01:52 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-11 21:01:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:01:52 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-11 21:01:52 LOG5 end_task: Level: (2) ID = <10067> Status = 0 0 0 0 ok 2009-May-11 21:01:52 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2009-May-11 21:01:52 START begin_task: Starting task 'applying pointing corrections' 2009-May-11 21:01:52 LOG5 begin_task: Level: (2) ID = <10068> Status = 0 0 0 0 ok 2009-May-11 21:01:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-May-11 21:01:52 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-May-11 21:01:52 STOP finish_task: Finishing task 'applying pointing corrections' 2009-May-11 21:01:52 LOG5 finish_task: Level: (2) ID = <10068> Status = 0 0 0 0 ok 2009-May-11 21:01:52 INFO2 finish_task: DONE finished applying: pointing corrections 2009-May-11 21:01:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:01:52 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-May-11 21:01:52 LOG5 end_task: Level: (2) ID = <10068> Status = 0 0 0 0 ok 2009-May-11 21:01:52 STOP finish_task: Finishing task 'selecting new source' 2009-May-11 21:01:52 LOG5 finish_task: Level: (1) ID = <10066> Status = 0 0 0 0 ok 2009-May-11 21:01:52 DONE finish_task: DONE finished selecting: new source 2009-May-11 21:01:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-11 21:01:52 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-May-11 21:01:52 LOG5 end_task: Level: (1) ID = <10066> Status = 0 0 0 0 ok 2009-May-11 21:01:52 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC_29" 2009-May-11 21:01:52 LOG4 got_cormsg: From DATATAKING: set ra 122829.4 2009-May-11 21:01:52 LOG4 got_cormsg: From DATATAKING: set dec 074153 2009-May-11 21:01:52 LOG4 got_cormsg: From DATATAKING: vw% 122829.4 2009-May-11 21:01:52 LOG4 got_cormsg: From DATATAKING: vw% 074153 2009-May-11 21:01:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:01:52 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-11 21:01:52 LOG4 got_cormsg: From DATATAKING: pnt tr 122829.4 074153 -CJ 2009-May-11 21:01:52 LOG4 got_cormsg: From DATATAKING: dopsetvel 6411 hel 2009-May-11 21:01:52 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-11 21:01:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:01:52 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-May-11 21:01:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:02:04 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2009-May-11 21:02:04 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 each first 0 2009-May-11 21:02:04 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 each first 0' 2009-May-11 21:02:04 BEGIN begin_task: Starting task 'standard on/off' 2009-May-11 21:02:04 LOG5 begin_task: Level: (1) ID = <10069> Status = 0 0 0 0 ok 2009-May-11 21:02:04 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'AGESVC_29' 2009-May-11 21:02:04 INFO1 onoff_wapp: Starting pattern: Standard on/off 2009-May-11 21:02:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2009-May-11 21:02:04 START begin_task: Starting task 'waiting on telescope' 2009-May-11 21:02:04 LOG5 begin_task: Level: (2) ID = <10070> Status = 0 0 0 0 ok 2009-May-11 21:02:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-11 21:02:04 LOG3 waittrk: Start waittrk 5 2009-May-11 21:02:04 START begin_task: Starting task 'waiting on telescope movement' 2009-May-11 21:02:04 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-May-11 21:02:09 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-11 21:02:09 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-May-11 21:02:09 START begin_task: Starting task 'waiting on telescope on source' 2009-May-11 21:02:09 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2009-May-11 21:02:22 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-11 21:02:22 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2009-May-11 21:02:22 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-11 21:02:22 INFO2 waittrk: Now tracking AGESVC_29 2009-May-11 21:02:22 LOG4 waittrk: Current telescope position: Az = 320.96 ZA = 13.48 2009-May-11 21:02:22 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-11 21:02:22 LOG5 finish_task: Level: (2) ID = <10070> Status = 0 0 0 0 ok 2009-May-11 21:02:22 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-11 21:02:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:02:22 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-11 21:02:22 LOG5 end_task: Level: (2) ID = <10070> Status = 0 0 0 0 ok 2009-May-11 21:02:22 START begin_task: Starting task 'selecting calibration type' 2009-May-11 21:02:22 LOG5 begin_task: Level: (2) ID = <10073> Status = 0 0 0 0 ok 2009-May-11 21:02:22 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-11 21:02:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-11 21:02:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:02:22 START begin_task: Starting task 'waiting on setcal' 2009-May-11 21:02:22 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2009-May-11 21:02:22 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-11 21:02:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:02:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:02:22 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-11 21:02:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-11 21:02:22 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2009-May-11 21:02:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-11 21:02:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-11 21:02:22 LOG5 end_task: Level: (2) ID = <10073> Status = 0 0 0 0 ok 2009-May-11 21:02:22 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 em/th/rm 2009-May-11 21:02:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 em/th/rm 2009-May-11 21:02:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 em/th/rm 2009-May-11 21:02:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 em/th/rm 2009-May-11 21:02:23 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2009-May-11 21:02:23 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2009-May-11 21:02:23 START begin_task: Starting task 'clearing telescope offsets' 2009-May-11 21:02:23 LOG5 begin_task: Level: (2) ID = <10075> Status = 0 0 0 0 ok 2009-May-11 21:02:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2009-May-11 21:02:23 INFO3 clear_offsets: Removing telescope offsets 2009-May-11 21:02:23 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC_29" 2009-May-11 21:02:23 LOG3 vw_send: To DATATAKING: pnt tr 122829.400000 74153.000000 -CJ 2009-May-11 21:02:23 STOP finish_task: Finishing task 'clearing telescope offsets' 2009-May-11 21:02:23 LOG5 finish_task: Level: (2) ID = <10075> Status = 0 0 0 0 ok 2009-May-11 21:02:23 INFO2 finish_task: DONE finished clearing: telescope offsets 2009-May-11 21:02:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:02:23 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2009-May-11 21:02:23 LOG5 end_task: Level: (2) ID = <10075> Status = 0 0 0 0 ok 2009-May-11 21:02:23 START begin_task: Starting task 'waiting on telescope' 2009-May-11 21:02:23 LOG5 begin_task: Level: (2) ID = <10076> Status = 0 0 0 0 ok 2009-May-11 21:02:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-11 21:02:23 LOG3 waittrk: Start waittrk 5 2009-May-11 21:02:23 START begin_task: Starting task 'waiting on telescope movement' 2009-May-11 21:02:23 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2009-May-11 21:02:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 em/th/rm' 2009-May-11 21:02:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:02:23 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC_29" 2009-May-11 21:02:23 LOG4 got_cormsg: From DATATAKING: pnt tr 122829.400000 74153.000000 -CJ 2009-May-11 21:02:23 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-11 21:02:23 NOTE WAPPDATA-new_file: New FITS file: wapp.20090511.a2048.0001.fits 2009-May-11 21:02:23 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090511.a2048.0001.fits} 2009-May-11 21:02:28 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-11 21:02:28 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2009-May-11 21:02:28 START begin_task: Starting task 'waiting on telescope on source' 2009-May-11 21:02:28 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-May-11 21:02:30 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-11 21:02:30 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-May-11 21:02:30 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-11 21:02:30 INFO2 waittrk: Now tracking AGESVC_29 2009-May-11 21:02:30 LOG4 waittrk: Current telescope position: Az = 321.07 ZA = 13.46 2009-May-11 21:02:30 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-11 21:02:30 LOG5 finish_task: Level: (2) ID = <10076> Status = 0 0 0 0 ok 2009-May-11 21:02:30 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-11 21:02:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:02:30 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-11 21:02:30 LOG5 end_task: Level: (2) ID = <10076> Status = 0 0 0 0 ok 2009-May-11 21:02:30 LOG5 antvel: Calling 'antvel 122829.400000 74153.000000 J 0' 2009-May-11 21:02:30 LOG2 antvel: Precessing RA = 12:28:29.4 Dec = +07:41:53.0 Epoch = 2009.36106 J 2009-May-11 21:02:30 LOG2 antvel: Computed apparent RA = 12:28:59.7 Dec = +07:38:38.0 2009-May-11 21:02:30 LOG2 antvel: Parameters to Doppler: Heliocentric 90150 2009 131 0.0 2009-May-11 21:02:30 INFO5 antvel: Computed antenna velocity: +21.19942 km/s 2009-May-11 21:02:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=6411.000000 veltype=velocity(optical) calctype=SUBBAND antvel=21.199420754999998 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-May-11 21:02:30 INFO4 dopset_gen: New sky frequencies: 1390.568300 1390.568300 1390.568300 1390.568300 1390.568300 1390.568300 1390.568300 1390.568300 1390.568300 2009-May-11 21:02:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1390.568300 sky0=1390.568300 sky1=1390.568300 sky2=1390.568300 sky3=1390.568300 sky4=1390.568300 sky5=1390.568300 sky6=1390.568300 sky7=1390.568300 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2009-May-11 21:02:30 LOG2 dopset_gen: Result from 'sky2syn': 11390.568300 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2009-May-11 21:02:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11390568300.0} 2009-May-11 21:02:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2009-May-11 21:02:30 START begin_task: Starting task 'adjusting WAPP power' 2009-May-11 21:02:30 LOG5 begin_task: Level: (2) ID = <10079> Status = 0 0 0 0 ok 2009-May-11 21:02:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-May-11 21:02:30 INFO2 adjust_power: Starting to adjust WAPP power 2009-May-11 21:02:30 LOG3 vw_send: To DATATAKING: adjpwrif1 2009-May-11 21:02:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2009-May-11 21:02:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:02:30 START begin_task: Starting task 'waiting on adjpwrif1' 2009-May-11 21:02:30 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-May-11 21:02:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11390568300.0} 2009-May-11 21:02:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2009-May-11 21:02:30 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2009-May-11 21:02:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:02:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:02:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:02:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:02:31 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-11 21:02:31 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2009-May-11 21:02:31 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-May-11 21:02:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2009-May-11 21:02:31 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-May-11 21:02:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-May-11 21:02:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:02:31 START begin_task: Starting task 'waiting on adjpwrif2' 2009-May-11 21:02:31 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2009-May-11 21:02:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:02:31 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-May-11 21:02:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:02:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:02:31 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-11 21:02:31 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-May-11 21:02:31 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2009-May-11 21:02:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-May-11 21:02:31 START begin_task: Starting task 'adjusting WAPP power' 2009-May-11 21:02:31 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-May-11 21:02:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-May-11 21:02:31 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2009-May-11 21:02:31 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2009-May-11 21:02:31 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2009-May-11 21:02:31 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2009-May-11 21:02:31 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-May-11 21:02:31 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-May-11 21:02:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:02:31 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 12 7 dB 2009-May-11 21:02:32 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2009-May-11 21:02:32 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2009-May-11 21:02:32 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2009-May-11 21:02:32 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2009-May-11 21:02:32 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 15 7 dB 2009-May-11 21:02:32 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 7 12 dB 2009-May-11 21:02:32 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 7 15 dB 2009-May-11 21:02:32 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-May-11 21:02:32 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-May-11 21:02:32 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-May-11 21:02:32 INFO2 wapp_adjpwr: WAPP power: 1.024 1.054 0.913 1.013 2009-May-11 21:02:32 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-11 21:02:32 LOG5 finish_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-May-11 21:02:32 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-May-11 21:02:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:02:32 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-11 21:02:32 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-May-11 21:02:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-11 21:02:32 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-11 21:02:32 LOG5 finish_task: Level: (2) ID = <10079> Status = 0 0 0 0 ok 2009-May-11 21:02:32 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-May-11 21:02:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:02:32 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-11 21:02:32 LOG5 end_task: Level: (2) ID = <10079> Status = 0 0 0 0 ok 2009-May-11 21:02:32 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2009-May-11 21:02:32 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON -' 2009-May-11 21:02:32 START begin_task: Starting task 'WAPP spectral observation' 2009-May-11 21:02:32 LOG5 begin_task: Level: (2) ID = <10084> Status = 0 0 0 0 ok 2009-May-11 21:02:32 INFO2 take_data: Starting WAPP scan: 913100170 2009-May-11 21:02:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 2009-May-11 21:02:32 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-11 21:02:32 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2009-May-11 21:02:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-11 21:02:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3753.00 2009-May-11 21:02:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11390.568300 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2009-May-11 21:02:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1390.568300 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:02:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1390.568300 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:02:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1390.568300 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:02:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1390.568300 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:07:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-11 21:07:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-11 21:07:33 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2009-May-11 21:07:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-11 21:07:33 LOG5 end_task: Level: (2) ID = <10084> Status = 0 0 0 0 ok 2009-May-11 21:07:33 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2009-May-11 21:07:33 LOG2 onoff_wapp: Parameters: RA-offset: -90.706200000000123 arcminutes wait: 60 secs 2009-May-11 21:07:33 LOG4 track_offsets: Calling 'track_offsets -90.706200000000123 0.0 main small' 2009-May-11 21:07:33 START begin_task: Starting task 'sending telescope offsets' 2009-May-11 21:07:33 LOG5 begin_task: Level: (2) ID = <10086> Status = 0 0 0 0 ok 2009-May-11 21:07:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2009-May-11 21:07:33 INFO2 track_offsets: Starting to send new offsets 2009-May-11 21:07:33 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC_29" 2009-May-11 21:07:33 LOG3 vw_send: To DATATAKING: pnt tr 122829.400000 74153.000000 -CJ -o -UD -1.51177 0.0 -CH 2009-May-11 21:07:33 STOP finish_task: Finishing task 'sending telescope offsets' 2009-May-11 21:07:33 LOG5 finish_task: Level: (2) ID = <10086> Status = 0 0 0 0 ok 2009-May-11 21:07:33 INFO2 finish_task: DONE finished sending: telescope offsets 2009-May-11 21:07:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:07:33 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2009-May-11 21:07:33 LOG5 end_task: Level: (2) ID = <10086> Status = 0 0 0 0 ok 2009-May-11 21:07:33 INFO2 lstwait: Waiting for 59.8 secs from LST 12:00:19 to LST 12:01:19 ... 2009-May-11 21:07:33 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836176000002972 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-11 21:07:33 START begin_task: Starting task 'waiting on wait on LST' 2009-May-11 21:07:33 LOG5 begin_task: Level: (2) ID = <10087> Status = 0 0 0 0 ok 2009-May-11 21:07:33 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC_29" 2009-May-11 21:07:33 LOG4 got_cormsg: From DATATAKING: pnt tr 122829.400000 74153.000000 -CJ -o -UD -1.51177 0.0 -CH 2009-May-11 21:07:33 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-11 21:08:03 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'AGESVC_29' (after 30 seconds) 2009-May-11 21:08:33 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-May-11 21:08:33 LOG5 end_task: Level: (2) ID = <10087> Status = 0 0 0 0 ok 2009-May-11 21:08:33 LOG4 lstwait: Finished waiting 0.17 seconds late 2009-May-11 21:08:33 INFO3 lstwait: Finished waiting 2009-May-11 21:08:33 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-11 21:08:33 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2009-May-11 21:08:33 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF -' 2009-May-11 21:08:33 START begin_task: Starting task 'WAPP spectral observation' 2009-May-11 21:08:33 LOG5 begin_task: Level: (2) ID = <10088> Status = 0 0 0 0 ok 2009-May-11 21:08:33 INFO2 take_data: Starting WAPP scan: 913100171 2009-May-11 21:08:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 2009-May-11 21:08:34 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-11 21:08:34 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2009-May-11 21:08:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-11 21:08:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4115.00 2009-May-11 21:08:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11390.568300 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2009-May-11 21:08:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1390.568300 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:08:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1390.568300 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:08:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1390.568300 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:08:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1390.568300 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:09:16 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 21:09:16.325 (seconds: 76156.325)!} 2009-May-11 21:09:16 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 21:09:16.325 (seconds: 76156.325)! 2009-May-11 21:09:17 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 76155.0 to 76156.0! 2009-May-11 21:09:18 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (76155.0 - 76157.0)! 2009-May-11 21:11:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999965 diff = 1)! 2009-May-11 21:11:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999965 diff = 1)! 2009-May-11 21:11:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999965 diff = 1)! 2009-May-11 21:11:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999965 diff = 1)! 2009-May-11 21:13:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-11 21:13:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-11 21:13:35 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2009-May-11 21:13:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-11 21:13:35 LOG5 end_task: Level: (2) ID = <10088> Status = 0 0 0 0 ok 2009-May-11 21:13:35 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2009-May-11 21:13:35 START begin_task: Starting task 'WAPP calibration' 2009-May-11 21:13:35 LOG5 begin_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2009-May-11 21:13:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-May-11 21:13:35 START begin_task: Starting task 'selecting calibration type' 2009-May-11 21:13:35 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2009-May-11 21:13:35 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-11 21:13:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-11 21:13:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:13:35 START begin_task: Starting task 'waiting on setcal' 2009-May-11 21:13:35 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2009-May-11 21:13:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-11 21:13:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:13:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:13:35 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-11 21:13:35 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-11 21:13:35 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2009-May-11 21:13:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-11 21:13:35 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-11 21:13:35 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2009-May-11 21:13:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-May-11 21:13:35 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-May-11 21:13:35 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-May-11 21:13:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-11 21:13:35 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2009-May-11 21:13:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:13:35 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-11 21:13:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-May-11 21:13:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-11 21:13:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-11 21:13:35 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2009-May-11 21:13:36 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-May-11 21:13:36 LOG4 take_data: Calling 'take_data 10 10 CAL ON -' 2009-May-11 21:13:36 START begin_task: Starting task 'WAPP spectral observation' 2009-May-11 21:13:36 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2009-May-11 21:13:36 INFO2 take_data: Starting WAPP scan: 913100172 2009-May-11 21:13:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-11 21:13:36 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-11 21:13:36 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2009-May-11 21:13:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-11 21:13:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4417.00 2009-May-11 21:13:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11390.568300 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2009-May-11 21:13:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1390.568300 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:13:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1390.568300 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:13:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1390.568300 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:13:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1390.568300 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:13:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-11 21:13:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-11 21:13:47 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2009-May-11 21:13:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-11 21:13:47 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2009-May-11 21:13:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-May-11 21:13:47 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-11 21:13:47 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-11 21:13:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-11 21:13:47 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2009-May-11 21:13:47 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-11 21:13:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-11 21:13:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-11 21:13:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-11 21:13:47 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2009-May-11 21:13:47 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-May-11 21:13:47 LOG4 take_data: Calling 'take_data 10 10 CAL OFF -' 2009-May-11 21:13:47 START begin_task: Starting task 'WAPP spectral observation' 2009-May-11 21:13:47 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-May-11 21:13:47 INFO2 take_data: Starting WAPP scan: 913100173 2009-May-11 21:13:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-11 21:13:48 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-11 21:13:48 LOG5 begin_task: Level: (4) ID = <10098> Status = 0 0 0 0 ok 2009-May-11 21:13:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-11 21:13:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4429.00 2009-May-11 21:13:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11390.568300 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2009-May-11 21:13:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1390.568300 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:13:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1390.568300 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:13:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1390.568300 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:13:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1390.568300 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:13:59 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-May-11 21:13:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-11 21:13:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-11 21:13:59 LOG5 end_task: Level: (4) ID = <10098> Status = 0 0 0 0 ok 2009-May-11 21:13:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-11 21:13:59 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-May-11 21:13:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-11 21:13:59 STOP finish_task: Finishing task 'WAPP calibration' 2009-May-11 21:13:59 LOG5 finish_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2009-May-11 21:13:59 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-May-11 21:13:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:13:59 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-May-11 21:13:59 LOG5 end_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2009-May-11 21:13:59 START begin_task: Starting task 'clearing telescope offsets' 2009-May-11 21:13:59 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-May-11 21:13:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2009-May-11 21:13:59 INFO3 clear_offsets: Removing telescope offsets 2009-May-11 21:13:59 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC_29" 2009-May-11 21:13:59 LOG3 vw_send: To DATATAKING: pnt tr 122829.400000 74153.000000 -CJ 2009-May-11 21:13:59 STOP finish_task: Finishing task 'clearing telescope offsets' 2009-May-11 21:13:59 LOG5 finish_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-May-11 21:13:59 INFO2 finish_task: DONE finished clearing: telescope offsets 2009-May-11 21:13:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:13:59 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2009-May-11 21:13:59 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-May-11 21:13:59 STOP finish_task: Finishing task 'standard on/off' 2009-May-11 21:13:59 LOG5 finish_task: Level: (1) ID = <10069> Status = 0 0 0 0 ok 2009-May-11 21:13:59 DONE finish_task: DONE finished pattern: standard on/off 2009-May-11 21:13:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-11 21:13:59 END end_task: Finishing task 'standard on/off' with status 'OK' 2009-May-11 21:13:59 LOG5 end_task: Level: (1) ID = <10069> Status = 0 0 0 0 ok 2009-May-11 21:13:59 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC_29" 2009-May-11 21:13:59 LOG4 got_cormsg: From DATATAKING: pnt tr 122829.400000 74153.000000 -CJ 2009-May-11 21:13:59 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-11 21:14:09 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-May-11 21:14:09 LOG4 exec_msg: From OBSERVER: track_new_source AGESVC_17 122323.7 070908 J 0 0 main small /share/obs4/usr/a2048/VCfollowup2.cat 7207 Heliocentric velocity(optical) 0 0 0.0 0.0 0 2009-May-11 21:14:09 LOG1 track_new_source: Calling 'track_new_source AGESVC_17 122323.7 070908 J 0 0 main small /share/obs4/usr/a2048/VCfollowup2.cat 7207 Heliocentric velocity(optical) 0 0 0.0 0.0 0' 2009-May-11 21:14:09 BEGIN begin_task: Starting task 'selecting new source' 2009-May-11 21:14:09 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-May-11 21:14:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC_17} INFO {Selecting source 'AGESVC_17' ...} 2009-May-11 21:14:10 LOG3 track_source: Calling 'track_source AGESVC_17 122323.7 070908 J 0 0 main small /share/obs4/usr/a2048/VCfollowup2.cat 7207 Heliocentric velocity(optical)' 2009-May-11 21:14:10 START begin_task: Starting task 'sending tracking commands' 2009-May-11 21:14:10 LOG5 begin_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2009-May-11 21:14:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC_17} INFO {Slewing to source 'AGESVC_17' ...} 2009-May-11 21:14:10 INFO1 track_source: Starting to track AGESVC_17 2009-May-11 21:14:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC_17" 2009-May-11 21:14:10 LOG3 vw_send: To DATATAKING: set ra 122323.7 2009-May-11 21:14:10 LOG3 vw_send: To DATATAKING: set dec 070908 2009-May-11 21:14:10 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-11 21:14:10 LOG3 vw_send: To DATATAKING: pnt tr 122323.7 070908 -CJ 2009-May-11 21:14:10 LOG3 vw_send: To DATATAKING: dopsetvel 7207 hel 2009-May-11 21:14:10 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-11 21:14:10 LOG5 finish_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2009-May-11 21:14:10 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-11 21:14:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:14:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-11 21:14:10 LOG5 end_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2009-May-11 21:14:10 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2009-May-11 21:14:10 START begin_task: Starting task 'applying pointing corrections' 2009-May-11 21:14:10 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-May-11 21:14:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-May-11 21:14:10 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-May-11 21:14:10 STOP finish_task: Finishing task 'applying pointing corrections' 2009-May-11 21:14:10 LOG5 finish_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-May-11 21:14:10 INFO2 finish_task: DONE finished applying: pointing corrections 2009-May-11 21:14:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:14:10 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-May-11 21:14:10 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-May-11 21:14:10 STOP finish_task: Finishing task 'selecting new source' 2009-May-11 21:14:10 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-May-11 21:14:10 DONE finish_task: DONE finished selecting: new source 2009-May-11 21:14:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-11 21:14:10 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-May-11 21:14:10 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-May-11 21:14:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC_17" 2009-May-11 21:14:10 LOG4 got_cormsg: From DATATAKING: set ra 122323.7 2009-May-11 21:14:10 LOG4 got_cormsg: From DATATAKING: set dec 070908 2009-May-11 21:14:10 LOG4 got_cormsg: From DATATAKING: vw% 122323.7 2009-May-11 21:14:10 LOG4 got_cormsg: From DATATAKING: vw% 070908 2009-May-11 21:14:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:14:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-11 21:14:10 LOG4 got_cormsg: From DATATAKING: pnt tr 122323.7 070908 -CJ 2009-May-11 21:14:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 7207 hel 2009-May-11 21:14:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-11 21:14:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:14:10 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-May-11 21:14:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:14:13 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-May-11 21:14:13 LOG4 exec_msg: From OBSERVER: track_new_source AGESVC_17 122323.7 070908 J 0 0 main small /share/obs4/usr/a2048/VCfollowup2.cat 7207 Heliocentric velocity(optical) 0 0 0.0 0.0 0 2009-May-11 21:14:13 LOG1 track_new_source: Calling 'track_new_source AGESVC_17 122323.7 070908 J 0 0 main small /share/obs4/usr/a2048/VCfollowup2.cat 7207 Heliocentric velocity(optical) 0 0 0.0 0.0 0' 2009-May-11 21:14:13 BEGIN begin_task: Starting task 'selecting new source' 2009-May-11 21:14:13 LOG5 begin_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2009-May-11 21:14:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC_17} INFO {Selecting source 'AGESVC_17' ...} 2009-May-11 21:14:14 LOG3 track_source: Calling 'track_source AGESVC_17 122323.7 070908 J 0 0 main small /share/obs4/usr/a2048/VCfollowup2.cat 7207 Heliocentric velocity(optical)' 2009-May-11 21:14:14 START begin_task: Starting task 'sending tracking commands' 2009-May-11 21:14:14 LOG5 begin_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2009-May-11 21:14:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC_17} INFO {Slewing to source 'AGESVC_17' ...} 2009-May-11 21:14:14 INFO1 track_source: Starting to track AGESVC_17 2009-May-11 21:14:14 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC_17" 2009-May-11 21:14:14 LOG3 vw_send: To DATATAKING: set ra 122323.7 2009-May-11 21:14:14 LOG3 vw_send: To DATATAKING: set dec 070908 2009-May-11 21:14:14 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-11 21:14:14 LOG3 vw_send: To DATATAKING: pnt tr 122323.7 070908 -CJ 2009-May-11 21:14:14 LOG3 vw_send: To DATATAKING: dopsetvel 7207 hel 2009-May-11 21:14:14 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-11 21:14:14 LOG5 finish_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2009-May-11 21:14:14 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-11 21:14:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:14:14 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-11 21:14:14 LOG5 end_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2009-May-11 21:14:14 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2009-May-11 21:14:14 START begin_task: Starting task 'applying pointing corrections' 2009-May-11 21:14:14 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-May-11 21:14:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-May-11 21:14:14 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-May-11 21:14:14 STOP finish_task: Finishing task 'applying pointing corrections' 2009-May-11 21:14:14 LOG5 finish_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-May-11 21:14:14 INFO2 finish_task: DONE finished applying: pointing corrections 2009-May-11 21:14:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:14:14 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-May-11 21:14:14 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-May-11 21:14:14 STOP finish_task: Finishing task 'selecting new source' 2009-May-11 21:14:14 LOG5 finish_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2009-May-11 21:14:14 DONE finish_task: DONE finished selecting: new source 2009-May-11 21:14:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-11 21:14:14 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-May-11 21:14:14 LOG5 end_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2009-May-11 21:14:14 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC_17" 2009-May-11 21:14:14 LOG4 got_cormsg: From DATATAKING: set ra 122323.7 2009-May-11 21:14:14 LOG4 got_cormsg: From DATATAKING: set dec 070908 2009-May-11 21:14:14 LOG4 got_cormsg: From DATATAKING: vw% 122323.7 2009-May-11 21:14:14 LOG4 got_cormsg: From DATATAKING: vw% 070908 2009-May-11 21:14:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:14:14 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-11 21:14:14 LOG4 got_cormsg: From DATATAKING: pnt tr 122323.7 070908 -CJ 2009-May-11 21:14:14 LOG4 got_cormsg: From DATATAKING: dopsetvel 7207 hel 2009-May-11 21:14:14 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-11 21:14:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:14:14 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-May-11 21:14:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:14:22 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2009-May-11 21:14:22 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 each first 0 2009-May-11 21:14:22 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 each first 0' 2009-May-11 21:14:22 BEGIN begin_task: Starting task 'standard on/off' 2009-May-11 21:14:22 LOG5 begin_task: Level: (1) ID = <10106> Status = 0 0 0 0 ok 2009-May-11 21:14:22 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'AGESVC_17' 2009-May-11 21:14:22 INFO1 onoff_wapp: Starting pattern: Standard on/off 2009-May-11 21:14:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2009-May-11 21:14:23 START begin_task: Starting task 'waiting on telescope' 2009-May-11 21:14:23 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-May-11 21:14:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-11 21:14:23 LOG3 waittrk: Start waittrk 5 2009-May-11 21:14:23 START begin_task: Starting task 'waiting on telescope movement' 2009-May-11 21:14:23 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2009-May-11 21:14:28 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-11 21:14:28 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2009-May-11 21:14:28 START begin_task: Starting task 'waiting on telescope on source' 2009-May-11 21:14:28 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2009-May-11 21:14:46 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-11 21:14:46 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2009-May-11 21:14:46 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-11 21:14:46 INFO2 waittrk: Now tracking AGESVC_17 2009-May-11 21:14:46 LOG4 waittrk: Current telescope position: Az = 339.63 ZA = 11.90 2009-May-11 21:14:46 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-11 21:14:46 LOG5 finish_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-May-11 21:14:46 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-11 21:14:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:14:46 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-11 21:14:46 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-May-11 21:14:46 START begin_task: Starting task 'selecting calibration type' 2009-May-11 21:14:46 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-May-11 21:14:46 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-11 21:14:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-11 21:14:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:14:46 START begin_task: Starting task 'waiting on setcal' 2009-May-11 21:14:46 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-May-11 21:14:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-11 21:14:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:14:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:14:46 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-11 21:14:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-11 21:14:46 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-May-11 21:14:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-11 21:14:46 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-11 21:14:46 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-May-11 21:14:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 em/th/rm 2009-May-11 21:14:46 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 em/th/rm 2009-May-11 21:14:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 em/th/rm 2009-May-11 21:14:46 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 em/th/rm 2009-May-11 21:14:46 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2009-May-11 21:14:46 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2009-May-11 21:14:47 START begin_task: Starting task 'clearing telescope offsets' 2009-May-11 21:14:47 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-May-11 21:14:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2009-May-11 21:14:47 INFO3 clear_offsets: Removing telescope offsets 2009-May-11 21:14:47 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC_17" 2009-May-11 21:14:47 LOG3 vw_send: To DATATAKING: pnt tr 122323.700000 70908.000000 -CJ 2009-May-11 21:14:47 STOP finish_task: Finishing task 'clearing telescope offsets' 2009-May-11 21:14:47 LOG5 finish_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-May-11 21:14:47 INFO2 finish_task: DONE finished clearing: telescope offsets 2009-May-11 21:14:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:14:47 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2009-May-11 21:14:47 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-May-11 21:14:47 START begin_task: Starting task 'waiting on telescope' 2009-May-11 21:14:47 LOG5 begin_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2009-May-11 21:14:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-11 21:14:47 LOG3 waittrk: Start waittrk 5 2009-May-11 21:14:47 START begin_task: Starting task 'waiting on telescope movement' 2009-May-11 21:14:47 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-May-11 21:14:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 em/th/rm' 2009-May-11 21:14:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:14:47 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC_17" 2009-May-11 21:14:47 LOG4 got_cormsg: From DATATAKING: pnt tr 122323.700000 70908.000000 -CJ 2009-May-11 21:14:47 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-11 21:14:47 NOTE WAPPDATA-new_file: New FITS file: wapp.20090511.a2048.0002.fits 2009-May-11 21:14:47 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090511.a2048.0002.fits} 2009-May-11 21:14:52 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-11 21:14:52 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-May-11 21:14:52 START begin_task: Starting task 'waiting on telescope on source' 2009-May-11 21:14:52 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-May-11 21:14:54 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-11 21:14:54 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-May-11 21:14:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-11 21:14:54 INFO2 waittrk: Now tracking AGESVC_17 2009-May-11 21:14:54 LOG4 waittrk: Current telescope position: Az = 339.79 ZA = 11.89 2009-May-11 21:14:54 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-11 21:14:54 LOG5 finish_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2009-May-11 21:14:54 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-11 21:14:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:14:54 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-11 21:14:54 LOG5 end_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2009-May-11 21:14:54 LOG5 antvel: Calling 'antvel 122323.700000 70908.000000 J 0' 2009-May-11 21:14:54 LOG2 antvel: Precessing RA = 12:23:23.7 Dec = +07:09:08.0 Epoch = 2009.36108 J 2009-May-11 21:14:54 LOG2 antvel: Computed apparent RA = 12:23:54.0 Dec = +07:05:52.5 2009-May-11 21:14:54 LOG2 antvel: Parameters to Doppler: Heliocentric 90894 2009 131 0.0 2009-May-11 21:14:54 INFO5 antvel: Computed antenna velocity: +21.62358 km/s 2009-May-11 21:14:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=7207.000000 veltype=velocity(optical) calctype=SUBBAND antvel=21.623583605099999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-May-11 21:14:54 INFO4 dopset_gen: New sky frequencies: 1386.960819 1386.960819 1386.960819 1386.960819 1386.960819 1386.960819 1386.960819 1386.960819 1386.960819 2009-May-11 21:14:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.960819 sky0=1386.960819 sky1=1386.960819 sky2=1386.960819 sky3=1386.960819 sky4=1386.960819 sky5=1386.960819 sky6=1386.960819 sky7=1386.960819 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2009-May-11 21:14:54 LOG2 dopset_gen: Result from 'sky2syn': 11386.960819 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2009-May-11 21:14:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11386960819.0} 2009-May-11 21:14:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2009-May-11 21:14:54 START begin_task: Starting task 'adjusting WAPP power' 2009-May-11 21:14:54 LOG5 begin_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2009-May-11 21:14:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-May-11 21:14:54 INFO2 adjust_power: Starting to adjust WAPP power 2009-May-11 21:14:54 LOG3 vw_send: To DATATAKING: adjpwrif1 2009-May-11 21:14:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2009-May-11 21:14:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:14:54 START begin_task: Starting task 'waiting on adjpwrif1' 2009-May-11 21:14:54 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-May-11 21:14:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11386960819.0} 2009-May-11 21:14:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2009-May-11 21:14:54 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2009-May-11 21:14:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:14:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:14:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:14:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:14:55 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-11 21:14:55 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2009-May-11 21:14:55 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-May-11 21:14:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2009-May-11 21:14:55 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-May-11 21:14:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-May-11 21:14:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:14:55 START begin_task: Starting task 'waiting on adjpwrif2' 2009-May-11 21:14:55 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-May-11 21:14:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:14:55 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-May-11 21:14:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:14:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:14:55 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-11 21:14:55 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-May-11 21:14:55 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-May-11 21:14:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-May-11 21:14:55 START begin_task: Starting task 'adjusting WAPP power' 2009-May-11 21:14:55 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-May-11 21:14:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-May-11 21:14:55 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2009-May-11 21:14:55 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2009-May-11 21:14:55 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2009-May-11 21:14:55 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2009-May-11 21:14:55 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-May-11 21:14:55 LOG5 begin_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2009-May-11 21:14:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:14:56 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 12 7 dB 2009-May-11 21:14:56 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2009-May-11 21:14:56 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2009-May-11 21:14:56 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2009-May-11 21:14:56 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2009-May-11 21:14:56 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 15 7 dB 2009-May-11 21:14:56 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 7 12 dB 2009-May-11 21:14:56 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 7 15 dB 2009-May-11 21:14:56 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-May-11 21:14:56 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-May-11 21:14:56 LOG5 end_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2009-May-11 21:14:56 INFO2 wapp_adjpwr: WAPP power: 1.047 1.102 0.924 1.053 2009-May-11 21:14:56 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-11 21:14:56 LOG5 finish_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-May-11 21:14:56 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-May-11 21:14:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:14:56 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-11 21:14:56 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-May-11 21:14:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-11 21:14:56 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-11 21:14:56 LOG5 finish_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2009-May-11 21:14:56 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-May-11 21:14:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:14:56 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-11 21:14:56 LOG5 end_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2009-May-11 21:14:56 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2009-May-11 21:14:56 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON -' 2009-May-11 21:14:56 START begin_task: Starting task 'WAPP spectral observation' 2009-May-11 21:14:56 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-May-11 21:14:56 INFO2 take_data: Starting WAPP scan: 913100174 2009-May-11 21:14:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 2009-May-11 21:14:56 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-11 21:14:56 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2009-May-11 21:14:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-11 21:14:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4497.00 2009-May-11 21:14:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11386.960819 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2009-May-11 21:14:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.960819 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:14:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.960819 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:14:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.960819 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:14:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.960819 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:19:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-11 21:19:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-11 21:19:57 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2009-May-11 21:19:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-11 21:19:57 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-May-11 21:19:57 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2009-May-11 21:19:57 LOG2 onoff_wapp: Parameters: RA-offset: -90.45600000000033 arcminutes wait: 60 secs 2009-May-11 21:19:57 LOG4 track_offsets: Calling 'track_offsets -90.45600000000033 0.0 main small' 2009-May-11 21:19:57 START begin_task: Starting task 'sending telescope offsets' 2009-May-11 21:19:57 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-May-11 21:19:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2009-May-11 21:19:57 INFO2 track_offsets: Starting to send new offsets 2009-May-11 21:19:57 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC_17" 2009-May-11 21:19:57 LOG3 vw_send: To DATATAKING: pnt tr 122323.700000 70908.000000 -CJ -o -UD -1.50760 0.0 -CH 2009-May-11 21:19:57 STOP finish_task: Finishing task 'sending telescope offsets' 2009-May-11 21:19:57 LOG5 finish_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-May-11 21:19:57 INFO2 finish_task: DONE finished sending: telescope offsets 2009-May-11 21:19:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:19:57 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2009-May-11 21:19:57 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-May-11 21:19:57 INFO2 lstwait: Waiting for 59.8 secs from LST 12:12:44 to LST 12:13:44 ... 2009-May-11 21:19:57 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836176000002972 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-11 21:19:57 START begin_task: Starting task 'waiting on wait on LST' 2009-May-11 21:19:57 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-May-11 21:19:57 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC_17" 2009-May-11 21:19:57 LOG4 got_cormsg: From DATATAKING: pnt tr 122323.700000 70908.000000 -CJ -o -UD -1.50760 0.0 -CH 2009-May-11 21:19:57 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-11 21:20:29 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'AGESVC_17' (after 32 seconds) 2009-May-11 21:20:57 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-May-11 21:20:57 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-May-11 21:20:57 LOG4 lstwait: Finished waiting 1.17 seconds late 2009-May-11 21:20:57 INFO3 lstwait: Finished waiting 2009-May-11 21:20:57 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-11 21:20:57 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2009-May-11 21:20:57 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF -' 2009-May-11 21:20:57 START begin_task: Starting task 'WAPP spectral observation' 2009-May-11 21:20:57 LOG5 begin_task: Level: (2) ID = <10125> Status = 0 0 0 0 ok 2009-May-11 21:20:57 INFO2 take_data: Starting WAPP scan: 913100175 2009-May-11 21:20:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 2009-May-11 21:20:58 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-11 21:20:58 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2009-May-11 21:20:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-11 21:20:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4859.00 2009-May-11 21:21:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11386.960819 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2009-May-11 21:21:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.960819 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:21:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.960819 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:21:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.960819 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:21:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.960819 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:25:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-11 21:25:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-11 21:25:59 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2009-May-11 21:25:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-11 21:25:59 LOG5 end_task: Level: (2) ID = <10125> Status = 0 0 0 0 ok 2009-May-11 21:25:59 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2009-May-11 21:25:59 START begin_task: Starting task 'WAPP calibration' 2009-May-11 21:25:59 LOG5 begin_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2009-May-11 21:25:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-May-11 21:25:59 START begin_task: Starting task 'selecting calibration type' 2009-May-11 21:25:59 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2009-May-11 21:25:59 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-11 21:25:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-11 21:25:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:25:59 START begin_task: Starting task 'waiting on setcal' 2009-May-11 21:25:59 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-May-11 21:25:59 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-11 21:25:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:25:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:25:59 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-11 21:25:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-11 21:25:59 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-May-11 21:25:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-11 21:25:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-11 21:25:59 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2009-May-11 21:25:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-May-11 21:25:59 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-May-11 21:25:59 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-May-11 21:25:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-11 21:25:59 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-May-11 21:25:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:25:59 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-11 21:25:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-May-11 21:25:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-11 21:25:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-11 21:25:59 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-May-11 21:26:00 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-May-11 21:26:00 LOG4 take_data: Calling 'take_data 10 10 CAL ON -' 2009-May-11 21:26:00 START begin_task: Starting task 'WAPP spectral observation' 2009-May-11 21:26:00 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-May-11 21:26:00 INFO2 take_data: Starting WAPP scan: 913100176 2009-May-11 21:26:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-11 21:26:00 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-11 21:26:00 LOG5 begin_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2009-May-11 21:26:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-11 21:26:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5161.00 2009-May-11 21:26:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11386.960819 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2009-May-11 21:26:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.960819 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:26:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.960819 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:26:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.960819 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:26:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.960819 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:26:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-11 21:26:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-11 21:26:11 LOG5 end_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2009-May-11 21:26:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-11 21:26:11 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-May-11 21:26:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-May-11 21:26:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-11 21:26:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-11 21:26:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-11 21:26:11 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2009-May-11 21:26:11 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-11 21:26:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-11 21:26:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-11 21:26:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-11 21:26:11 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2009-May-11 21:26:11 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-May-11 21:26:11 LOG4 take_data: Calling 'take_data 10 10 CAL OFF -' 2009-May-11 21:26:11 START begin_task: Starting task 'WAPP spectral observation' 2009-May-11 21:26:11 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2009-May-11 21:26:11 INFO2 take_data: Starting WAPP scan: 913100177 2009-May-11 21:26:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-11 21:26:12 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-11 21:26:12 LOG5 begin_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2009-May-11 21:26:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-11 21:26:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5173.00 2009-May-11 21:26:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11386.960819 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2009-May-11 21:26:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.960819 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:26:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.960819 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:26:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.960819 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:26:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.960819 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:26:23 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-May-11 21:26:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-11 21:26:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-11 21:26:23 LOG5 end_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2009-May-11 21:26:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-11 21:26:23 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2009-May-11 21:26:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-11 21:26:23 STOP finish_task: Finishing task 'WAPP calibration' 2009-May-11 21:26:23 LOG5 finish_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2009-May-11 21:26:23 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-May-11 21:26:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:26:23 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-May-11 21:26:23 LOG5 end_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2009-May-11 21:26:23 START begin_task: Starting task 'clearing telescope offsets' 2009-May-11 21:26:23 LOG5 begin_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2009-May-11 21:26:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2009-May-11 21:26:23 INFO3 clear_offsets: Removing telescope offsets 2009-May-11 21:26:23 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC_17" 2009-May-11 21:26:23 LOG3 vw_send: To DATATAKING: pnt tr 122323.700000 70908.000000 -CJ 2009-May-11 21:26:23 STOP finish_task: Finishing task 'clearing telescope offsets' 2009-May-11 21:26:23 LOG5 finish_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2009-May-11 21:26:23 INFO2 finish_task: DONE finished clearing: telescope offsets 2009-May-11 21:26:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:26:23 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2009-May-11 21:26:23 LOG5 end_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2009-May-11 21:26:23 STOP finish_task: Finishing task 'standard on/off' 2009-May-11 21:26:23 LOG5 finish_task: Level: (1) ID = <10106> Status = 0 0 0 0 ok 2009-May-11 21:26:23 DONE finish_task: DONE finished pattern: standard on/off 2009-May-11 21:26:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-11 21:26:23 END end_task: Finishing task 'standard on/off' with status 'OK' 2009-May-11 21:26:23 LOG5 end_task: Level: (1) ID = <10106> Status = 0 0 0 0 ok 2009-May-11 21:26:23 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC_17" 2009-May-11 21:26:23 LOG4 got_cormsg: From DATATAKING: pnt tr 122323.700000 70908.000000 -CJ 2009-May-11 21:26:23 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-11 21:26:27 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-May-11 21:26:27 LOG4 exec_msg: From OBSERVER: track_new_source AGESVC_125 121757.2 072851 J 0 0 main small /share/obs4/usr/a2048/VCfollowup2.cat 10028 Heliocentric velocity(optical) 0 0 0.0 0.0 0 2009-May-11 21:26:27 LOG1 track_new_source: Calling 'track_new_source AGESVC_125 121757.2 072851 J 0 0 main small /share/obs4/usr/a2048/VCfollowup2.cat 10028 Heliocentric velocity(optical) 0 0 0.0 0.0 0' 2009-May-11 21:26:27 BEGIN begin_task: Starting task 'selecting new source' 2009-May-11 21:26:27 LOG5 begin_task: Level: (1) ID = <10137> Status = 0 0 0 0 ok 2009-May-11 21:26:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC_125} INFO {Selecting source 'AGESVC_125' ...} 2009-May-11 21:26:27 LOG3 track_source: Calling 'track_source AGESVC_125 121757.2 072851 J 0 0 main small /share/obs4/usr/a2048/VCfollowup2.cat 10028 Heliocentric velocity(optical)' 2009-May-11 21:26:27 START begin_task: Starting task 'sending tracking commands' 2009-May-11 21:26:27 LOG5 begin_task: Level: (2) ID = <10138> Status = 0 0 0 0 ok 2009-May-11 21:26:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC_125} INFO {Slewing to source 'AGESVC_125' ...} 2009-May-11 21:26:27 INFO1 track_source: Starting to track AGESVC_125 2009-May-11 21:26:27 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC_125" 2009-May-11 21:26:27 LOG3 vw_send: To DATATAKING: set ra 121757.2 2009-May-11 21:26:27 LOG3 vw_send: To DATATAKING: set dec 072851 2009-May-11 21:26:28 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-11 21:26:28 LOG3 vw_send: To DATATAKING: pnt tr 121757.2 072851 -CJ 2009-May-11 21:26:28 LOG3 vw_send: To DATATAKING: dopsetvel 10028 hel 2009-May-11 21:26:28 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-11 21:26:28 LOG5 finish_task: Level: (2) ID = <10138> Status = 0 0 0 0 ok 2009-May-11 21:26:28 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-11 21:26:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:26:28 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-11 21:26:28 LOG5 end_task: Level: (2) ID = <10138> Status = 0 0 0 0 ok 2009-May-11 21:26:28 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2009-May-11 21:26:28 START begin_task: Starting task 'applying pointing corrections' 2009-May-11 21:26:28 LOG5 begin_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2009-May-11 21:26:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-May-11 21:26:28 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-May-11 21:26:28 STOP finish_task: Finishing task 'applying pointing corrections' 2009-May-11 21:26:28 LOG5 finish_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2009-May-11 21:26:28 INFO2 finish_task: DONE finished applying: pointing corrections 2009-May-11 21:26:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:26:28 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-May-11 21:26:28 LOG5 end_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2009-May-11 21:26:28 STOP finish_task: Finishing task 'selecting new source' 2009-May-11 21:26:28 LOG5 finish_task: Level: (1) ID = <10137> Status = 0 0 0 0 ok 2009-May-11 21:26:28 DONE finish_task: DONE finished selecting: new source 2009-May-11 21:26:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-11 21:26:28 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-May-11 21:26:28 LOG5 end_task: Level: (1) ID = <10137> Status = 0 0 0 0 ok 2009-May-11 21:26:28 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC_125" 2009-May-11 21:26:28 LOG4 got_cormsg: From DATATAKING: set ra 121757.2 2009-May-11 21:26:28 LOG4 got_cormsg: From DATATAKING: set dec 072851 2009-May-11 21:26:28 LOG4 got_cormsg: From DATATAKING: vw% 121757.2 2009-May-11 21:26:28 LOG4 got_cormsg: From DATATAKING: vw% 072851 2009-May-11 21:26:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:26:28 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-11 21:26:28 LOG4 got_cormsg: From DATATAKING: pnt tr 121757.2 072851 -CJ 2009-May-11 21:26:28 LOG4 got_cormsg: From DATATAKING: dopsetvel 10028 hel 2009-May-11 21:26:28 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-11 21:26:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:26:28 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-May-11 21:26:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:26:36 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2009-May-11 21:26:36 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 each first 0 2009-May-11 21:26:36 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 each first 0' 2009-May-11 21:26:36 BEGIN begin_task: Starting task 'standard on/off' 2009-May-11 21:26:36 LOG5 begin_task: Level: (1) ID = <10140> Status = 0 0 0 0 ok 2009-May-11 21:26:36 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'AGESVC_125' 2009-May-11 21:26:36 INFO1 onoff_wapp: Starting pattern: Standard on/off 2009-May-11 21:26:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2009-May-11 21:26:36 START begin_task: Starting task 'waiting on telescope' 2009-May-11 21:26:36 LOG5 begin_task: Level: (2) ID = <10141> Status = 0 0 0 0 ok 2009-May-11 21:26:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-11 21:26:36 LOG3 waittrk: Start waittrk 5 2009-May-11 21:26:36 START begin_task: Starting task 'waiting on telescope movement' 2009-May-11 21:26:36 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-May-11 21:26:42 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-11 21:26:42 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-May-11 21:26:42 START begin_task: Starting task 'waiting on telescope on source' 2009-May-11 21:26:42 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2009-May-11 21:27:14 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-11 21:27:14 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2009-May-11 21:27:14 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-11 21:27:14 INFO2 waittrk: Now tracking AGESVC_125 2009-May-11 21:27:14 LOG4 waittrk: Current telescope position: Az = 361.74 ZA = 10.89 2009-May-11 21:27:14 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-11 21:27:14 LOG5 finish_task: Level: (2) ID = <10141> Status = 0 0 0 0 ok 2009-May-11 21:27:14 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-11 21:27:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:27:14 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-11 21:27:14 LOG5 end_task: Level: (2) ID = <10141> Status = 0 0 0 0 ok 2009-May-11 21:27:14 START begin_task: Starting task 'selecting calibration type' 2009-May-11 21:27:14 LOG5 begin_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2009-May-11 21:27:14 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-11 21:27:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-11 21:27:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:27:14 START begin_task: Starting task 'waiting on setcal' 2009-May-11 21:27:14 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2009-May-11 21:27:14 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-11 21:27:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:27:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:27:14 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-11 21:27:14 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-11 21:27:14 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2009-May-11 21:27:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-11 21:27:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-11 21:27:14 LOG5 end_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2009-May-11 21:27:14 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 em/th/rm 2009-May-11 21:27:14 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 em/th/rm 2009-May-11 21:27:14 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 em/th/rm 2009-May-11 21:27:14 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 em/th/rm 2009-May-11 21:27:14 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2009-May-11 21:27:14 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2009-May-11 21:27:14 START begin_task: Starting task 'clearing telescope offsets' 2009-May-11 21:27:14 LOG5 begin_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2009-May-11 21:27:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2009-May-11 21:27:15 INFO3 clear_offsets: Removing telescope offsets 2009-May-11 21:27:15 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC_125" 2009-May-11 21:27:15 LOG3 vw_send: To DATATAKING: pnt tr 121757.200000 72851.000000 -CJ 2009-May-11 21:27:15 STOP finish_task: Finishing task 'clearing telescope offsets' 2009-May-11 21:27:15 LOG5 finish_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2009-May-11 21:27:15 INFO2 finish_task: DONE finished clearing: telescope offsets 2009-May-11 21:27:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:27:15 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2009-May-11 21:27:15 LOG5 end_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2009-May-11 21:27:15 START begin_task: Starting task 'waiting on telescope' 2009-May-11 21:27:15 LOG5 begin_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2009-May-11 21:27:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-11 21:27:15 LOG3 waittrk: Start waittrk 5 2009-May-11 21:27:15 START begin_task: Starting task 'waiting on telescope movement' 2009-May-11 21:27:15 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2009-May-11 21:27:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 em/th/rm' 2009-May-11 21:27:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:27:15 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC_125" 2009-May-11 21:27:15 LOG4 got_cormsg: From DATATAKING: pnt tr 121757.200000 72851.000000 -CJ 2009-May-11 21:27:15 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-11 21:27:15 NOTE WAPPDATA-new_file: New FITS file: wapp.20090511.a2048.0003.fits 2009-May-11 21:27:15 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090511.a2048.0003.fits} 2009-May-11 21:27:20 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-11 21:27:20 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2009-May-11 21:27:20 START begin_task: Starting task 'waiting on telescope on source' 2009-May-11 21:27:20 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2009-May-11 21:27:22 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-11 21:27:22 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2009-May-11 21:27:22 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-11 21:27:22 INFO2 waittrk: Now tracking AGESVC_125 2009-May-11 21:27:22 LOG4 waittrk: Current telescope position: Az = 361.92 ZA = 10.89 2009-May-11 21:27:22 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-11 21:27:22 LOG5 finish_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2009-May-11 21:27:22 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-11 21:27:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:27:22 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-11 21:27:22 LOG5 end_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2009-May-11 21:27:22 LOG5 antvel: Calling 'antvel 121757.200000 72851.000000 J 0' 2009-May-11 21:27:22 LOG2 antvel: Precessing RA = 12:17:57.2 Dec = +07:28:51.0 Epoch = 2009.36111 J 2009-May-11 21:27:22 LOG2 antvel: Computed apparent RA = 12:18:27.6 Dec = +07:25:35.3 2009-May-11 21:27:22 LOG2 antvel: Parameters to Doppler: Heliocentric 91642 2009 131 0.0 2009-May-11 21:27:22 INFO5 antvel: Computed antenna velocity: +22.13881 km/s 2009-May-11 21:27:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=10028.000000 veltype=velocity(optical) calctype=SUBBAND antvel=22.1388125561 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-May-11 21:27:22 INFO4 dopset_gen: New sky frequencies: 1374.329799 1374.329799 1374.329799 1374.329799 1374.329799 1374.329799 1374.329799 1374.329799 1374.329799 2009-May-11 21:27:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1374.329799 sky0=1374.329799 sky1=1374.329799 sky2=1374.329799 sky3=1374.329799 sky4=1374.329799 sky5=1374.329799 sky6=1374.329799 sky7=1374.329799 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2009-May-11 21:27:22 LOG2 dopset_gen: Result from 'sky2syn': 11374.329799 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2009-May-11 21:27:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11374329799.0} 2009-May-11 21:27:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2009-May-11 21:27:22 START begin_task: Starting task 'adjusting WAPP power' 2009-May-11 21:27:22 LOG5 begin_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2009-May-11 21:27:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-May-11 21:27:22 INFO2 adjust_power: Starting to adjust WAPP power 2009-May-11 21:27:22 LOG3 vw_send: To DATATAKING: adjpwrif1 2009-May-11 21:27:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2009-May-11 21:27:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:27:22 START begin_task: Starting task 'waiting on adjpwrif1' 2009-May-11 21:27:22 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2009-May-11 21:27:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11374329799.0} 2009-May-11 21:27:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2009-May-11 21:27:22 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2009-May-11 21:27:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:27:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:27:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:27:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:27:23 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-11 21:27:23 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2009-May-11 21:27:23 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2009-May-11 21:27:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2009-May-11 21:27:23 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-May-11 21:27:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-May-11 21:27:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:27:23 START begin_task: Starting task 'waiting on adjpwrif2' 2009-May-11 21:27:23 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2009-May-11 21:27:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:27:23 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-May-11 21:27:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:27:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:27:23 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-11 21:27:23 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-May-11 21:27:23 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2009-May-11 21:27:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-May-11 21:27:23 START begin_task: Starting task 'adjusting WAPP power' 2009-May-11 21:27:23 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2009-May-11 21:27:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-May-11 21:27:23 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2009-May-11 21:27:23 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2009-May-11 21:27:23 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2009-May-11 21:27:23 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2009-May-11 21:27:23 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-May-11 21:27:23 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2009-May-11 21:27:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:27:23 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2009-May-11 21:27:23 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2009-May-11 21:27:23 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 12 7 dB 2009-May-11 21:27:23 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2009-May-11 21:27:23 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2009-May-11 21:27:23 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 15 7 dB 2009-May-11 21:27:23 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 7 13 dB 2009-May-11 21:27:24 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 7 15 dB 2009-May-11 21:27:24 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-May-11 21:27:24 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-May-11 21:27:24 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2009-May-11 21:27:24 INFO2 wapp_adjpwr: WAPP power: 1.114 0.985 0.986 1.167 2009-May-11 21:27:24 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-11 21:27:24 LOG5 finish_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2009-May-11 21:27:24 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-May-11 21:27:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:27:24 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-11 21:27:24 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2009-May-11 21:27:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-11 21:27:24 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-11 21:27:24 LOG5 finish_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2009-May-11 21:27:24 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-May-11 21:27:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:27:24 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-11 21:27:24 LOG5 end_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2009-May-11 21:27:24 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2009-May-11 21:27:24 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON -' 2009-May-11 21:27:24 START begin_task: Starting task 'WAPP spectral observation' 2009-May-11 21:27:24 LOG5 begin_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2009-May-11 21:27:24 INFO2 take_data: Starting WAPP scan: 913100178 2009-May-11 21:27:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 2009-May-11 21:27:24 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-11 21:27:24 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-May-11 21:27:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-11 21:27:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5245.00 2009-May-11 21:27:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11374.329799 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2009-May-11 21:27:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1374.329799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:27:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1374.329799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:27:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1374.329799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:27:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1374.329799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:32:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-11 21:32:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-11 21:32:25 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-May-11 21:32:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-11 21:32:25 LOG5 end_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2009-May-11 21:32:25 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2009-May-11 21:32:25 LOG2 onoff_wapp: Parameters: RA-offset: -90.45600000000033 arcminutes wait: 60 secs 2009-May-11 21:32:25 LOG4 track_offsets: Calling 'track_offsets -90.45600000000033 0.0 main small' 2009-May-11 21:32:25 START begin_task: Starting task 'sending telescope offsets' 2009-May-11 21:32:25 LOG5 begin_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2009-May-11 21:32:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2009-May-11 21:32:25 INFO2 track_offsets: Starting to send new offsets 2009-May-11 21:32:25 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC_125" 2009-May-11 21:32:25 LOG3 vw_send: To DATATAKING: pnt tr 121757.200000 72851.000000 -CJ -o -UD -1.50760 0.0 -CH 2009-May-11 21:32:25 STOP finish_task: Finishing task 'sending telescope offsets' 2009-May-11 21:32:25 LOG5 finish_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2009-May-11 21:32:25 INFO2 finish_task: DONE finished sending: telescope offsets 2009-May-11 21:32:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:32:25 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2009-May-11 21:32:25 LOG5 end_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2009-May-11 21:32:25 INFO2 lstwait: Waiting for 59.8 secs from LST 12:25:14 to LST 12:26:14 ... 2009-May-11 21:32:25 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836176000002972 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-11 21:32:25 START begin_task: Starting task 'waiting on wait on LST' 2009-May-11 21:32:25 LOG5 begin_task: Level: (2) ID = <10158> Status = 0 0 0 0 ok 2009-May-11 21:32:25 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC_125" 2009-May-11 21:32:25 LOG4 got_cormsg: From DATATAKING: pnt tr 121757.200000 72851.000000 -CJ -o -UD -1.50760 0.0 -CH 2009-May-11 21:32:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-11 21:32:59 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'AGESVC_125' (after 34 seconds) 2009-May-11 21:33:25 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-May-11 21:33:25 LOG5 end_task: Level: (2) ID = <10158> Status = 0 0 0 0 ok 2009-May-11 21:33:25 LOG4 lstwait: Finished waiting 1.17 seconds late 2009-May-11 21:33:25 INFO3 lstwait: Finished waiting 2009-May-11 21:33:25 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-11 21:33:25 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2009-May-11 21:33:25 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF -' 2009-May-11 21:33:25 START begin_task: Starting task 'WAPP spectral observation' 2009-May-11 21:33:25 LOG5 begin_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2009-May-11 21:33:25 INFO2 take_data: Starting WAPP scan: 913100179 2009-May-11 21:33:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 2009-May-11 21:33:25 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-11 21:33:25 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2009-May-11 21:33:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-11 21:33:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5606.00 2009-May-11 21:33:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11374.329799 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2009-May-11 21:33:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1374.329799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:33:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1374.329799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:33:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1374.329799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:33:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1374.329799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:38:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (99999965 != 99999966 diff = 1)! 2009-May-11 21:38:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (99999965 != 99999966 diff = 1)! 2009-May-11 21:38:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (99999965 != 99999966 diff = 1)! 2009-May-11 21:38:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-11 21:38:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-11 21:38:26 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2009-May-11 21:38:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-11 21:38:26 LOG5 end_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2009-May-11 21:38:26 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2009-May-11 21:38:26 START begin_task: Starting task 'WAPP calibration' 2009-May-11 21:38:26 LOG5 begin_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2009-May-11 21:38:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-May-11 21:38:26 START begin_task: Starting task 'selecting calibration type' 2009-May-11 21:38:26 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2009-May-11 21:38:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-11 21:38:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-11 21:38:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:38:26 START begin_task: Starting task 'waiting on setcal' 2009-May-11 21:38:26 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2009-May-11 21:38:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-11 21:38:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:38:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:38:26 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-11 21:38:26 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-11 21:38:26 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2009-May-11 21:38:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-11 21:38:26 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-11 21:38:26 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2009-May-11 21:38:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-May-11 21:38:26 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-May-11 21:38:26 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-May-11 21:38:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-11 21:38:26 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2009-May-11 21:38:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:38:27 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-11 21:38:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-May-11 21:38:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-11 21:38:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-11 21:38:27 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2009-May-11 21:38:27 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-May-11 21:38:27 LOG4 take_data: Calling 'take_data 10 10 CAL ON -' 2009-May-11 21:38:27 START begin_task: Starting task 'WAPP spectral observation' 2009-May-11 21:38:27 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-May-11 21:38:27 INFO2 take_data: Starting WAPP scan: 913100180 2009-May-11 21:38:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-11 21:38:27 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-11 21:38:27 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2009-May-11 21:38:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-11 21:38:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5908.00 2009-May-11 21:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11374.329799 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2009-May-11 21:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1374.329799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1374.329799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1374.329799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1374.329799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:38:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-11 21:38:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-11 21:38:38 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2009-May-11 21:38:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-11 21:38:38 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-May-11 21:38:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-May-11 21:38:38 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-11 21:38:38 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-11 21:38:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-11 21:38:38 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-May-11 21:38:38 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-11 21:38:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-11 21:38:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-11 21:38:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-11 21:38:38 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-May-11 21:38:38 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-May-11 21:38:38 LOG4 take_data: Calling 'take_data 10 10 CAL OFF -' 2009-May-11 21:38:38 START begin_task: Starting task 'WAPP spectral observation' 2009-May-11 21:38:38 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2009-May-11 21:38:38 INFO2 take_data: Starting WAPP scan: 913100181 2009-May-11 21:38:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-11 21:38:39 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-11 21:38:39 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2009-May-11 21:38:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-11 21:38:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5920.00 2009-May-11 21:38:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11374.329799 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2009-May-11 21:38:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1374.329799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:38:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1374.329799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:38:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1374.329799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:38:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1374.329799 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:38:50 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-May-11 21:38:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-11 21:38:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-11 21:38:50 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2009-May-11 21:38:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-11 21:38:50 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2009-May-11 21:38:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-11 21:38:50 STOP finish_task: Finishing task 'WAPP calibration' 2009-May-11 21:38:50 LOG5 finish_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2009-May-11 21:38:50 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-May-11 21:38:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:38:50 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-May-11 21:38:50 LOG5 end_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2009-May-11 21:38:50 START begin_task: Starting task 'clearing telescope offsets' 2009-May-11 21:38:50 LOG5 begin_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2009-May-11 21:38:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2009-May-11 21:38:50 INFO3 clear_offsets: Removing telescope offsets 2009-May-11 21:38:50 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC_125" 2009-May-11 21:38:50 LOG3 vw_send: To DATATAKING: pnt tr 121757.200000 72851.000000 -CJ 2009-May-11 21:38:50 STOP finish_task: Finishing task 'clearing telescope offsets' 2009-May-11 21:38:50 LOG5 finish_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2009-May-11 21:38:50 INFO2 finish_task: DONE finished clearing: telescope offsets 2009-May-11 21:38:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:38:50 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2009-May-11 21:38:50 LOG5 end_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2009-May-11 21:38:50 STOP finish_task: Finishing task 'standard on/off' 2009-May-11 21:38:50 LOG5 finish_task: Level: (1) ID = <10140> Status = 0 0 0 0 ok 2009-May-11 21:38:50 DONE finish_task: DONE finished pattern: standard on/off 2009-May-11 21:38:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-11 21:38:50 END end_task: Finishing task 'standard on/off' with status 'OK' 2009-May-11 21:38:50 LOG5 end_task: Level: (1) ID = <10140> Status = 0 0 0 0 ok 2009-May-11 21:38:50 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC_125" 2009-May-11 21:38:50 LOG4 got_cormsg: From DATATAKING: pnt tr 121757.200000 72851.000000 -CJ 2009-May-11 21:38:50 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-11 21:39:00 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-May-11 21:39:00 LOG4 exec_msg: From OBSERVER: track_new_source AGESVC1_129 123652.0 072528 J 0 0 main small /share/obs4/usr/a2048/VCfollowup2.cat 1634 Heliocentric velocity(optical) 0 0 0.0 0.0 0 2009-May-11 21:39:00 LOG1 track_new_source: Calling 'track_new_source AGESVC1_129 123652.0 072528 J 0 0 main small /share/obs4/usr/a2048/VCfollowup2.cat 1634 Heliocentric velocity(optical) 0 0 0.0 0.0 0' 2009-May-11 21:39:00 BEGIN begin_task: Starting task 'selecting new source' 2009-May-11 21:39:00 LOG5 begin_task: Level: (1) ID = <10171> Status = 0 0 0 0 ok 2009-May-11 21:39:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1_129} INFO {Selecting source 'AGESVC1_129' ...} 2009-May-11 21:39:00 LOG3 track_source: Calling 'track_source AGESVC1_129 123652.0 072528 J 0 0 main small /share/obs4/usr/a2048/VCfollowup2.cat 1634 Heliocentric velocity(optical)' 2009-May-11 21:39:00 START begin_task: Starting task 'sending tracking commands' 2009-May-11 21:39:00 LOG5 begin_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2009-May-11 21:39:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1_129} INFO {Slewing to source 'AGESVC1_129' ...} 2009-May-11 21:39:00 INFO1 track_source: Starting to track AGESVC1_129 2009-May-11 21:39:00 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1_129" 2009-May-11 21:39:00 LOG3 vw_send: To DATATAKING: set ra 123652.0 2009-May-11 21:39:00 LOG3 vw_send: To DATATAKING: set dec 072528 2009-May-11 21:39:00 LOG3 vw_send: To DATATAKING: pnt tr send 2009-May-11 21:39:00 LOG3 vw_send: To DATATAKING: pnt tr 123652.0 072528 -CJ 2009-May-11 21:39:00 LOG3 vw_send: To DATATAKING: dopsetvel 1634 hel 2009-May-11 21:39:00 STOP finish_task: Finishing task 'sending tracking commands' 2009-May-11 21:39:00 LOG5 finish_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2009-May-11 21:39:00 INFO2 finish_task: DONE finished sending: tracking commands 2009-May-11 21:39:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:39:00 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-May-11 21:39:00 LOG5 end_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2009-May-11 21:39:00 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2009-May-11 21:39:00 START begin_task: Starting task 'applying pointing corrections' 2009-May-11 21:39:00 LOG5 begin_task: Level: (2) ID = <10173> Status = 0 0 0 0 ok 2009-May-11 21:39:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-May-11 21:39:00 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-May-11 21:39:00 STOP finish_task: Finishing task 'applying pointing corrections' 2009-May-11 21:39:00 LOG5 finish_task: Level: (2) ID = <10173> Status = 0 0 0 0 ok 2009-May-11 21:39:00 INFO2 finish_task: DONE finished applying: pointing corrections 2009-May-11 21:39:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:39:00 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-May-11 21:39:00 LOG5 end_task: Level: (2) ID = <10173> Status = 0 0 0 0 ok 2009-May-11 21:39:00 STOP finish_task: Finishing task 'selecting new source' 2009-May-11 21:39:00 LOG5 finish_task: Level: (1) ID = <10171> Status = 0 0 0 0 ok 2009-May-11 21:39:00 DONE finish_task: DONE finished selecting: new source 2009-May-11 21:39:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-11 21:39:00 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-May-11 21:39:00 LOG5 end_task: Level: (1) ID = <10171> Status = 0 0 0 0 ok 2009-May-11 21:39:00 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1_129" 2009-May-11 21:39:00 LOG4 got_cormsg: From DATATAKING: set ra 123652.0 2009-May-11 21:39:00 LOG4 got_cormsg: From DATATAKING: set dec 072528 2009-May-11 21:39:00 LOG4 got_cormsg: From DATATAKING: vw% 123652.0 2009-May-11 21:39:00 LOG4 got_cormsg: From DATATAKING: vw% 072528 2009-May-11 21:39:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:39:00 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-May-11 21:39:00 LOG4 got_cormsg: From DATATAKING: pnt tr 123652.0 072528 -CJ 2009-May-11 21:39:00 LOG4 got_cormsg: From DATATAKING: dopsetvel 1634 hel 2009-May-11 21:39:00 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-11 21:39:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:39:00 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-May-11 21:39:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:39:14 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 21:39:14.295 (seconds: 77954.295)!} 2009-May-11 21:39:14 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 21:39:14.295 (seconds: 77954.295)! 2009-May-11 21:39:19 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2009-May-11 21:39:19 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 each first 0 2009-May-11 21:39:19 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 each first 0' 2009-May-11 21:39:19 BEGIN begin_task: Starting task 'standard on/off' 2009-May-11 21:39:19 LOG5 begin_task: Level: (1) ID = <10174> Status = 0 0 0 0 ok 2009-May-11 21:39:19 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'AGESVC1_129' 2009-May-11 21:39:19 INFO1 onoff_wapp: Starting pattern: Standard on/off 2009-May-11 21:39:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2009-May-11 21:39:19 START begin_task: Starting task 'waiting on telescope' 2009-May-11 21:39:19 LOG5 begin_task: Level: (2) ID = <10175> Status = 0 0 0 0 ok 2009-May-11 21:39:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-11 21:39:19 LOG3 waittrk: Start waittrk 5 2009-May-11 21:39:19 START begin_task: Starting task 'waiting on telescope movement' 2009-May-11 21:39:19 LOG5 begin_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2009-May-11 21:39:24 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-11 21:39:24 LOG5 end_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2009-May-11 21:39:24 START begin_task: Starting task 'waiting on telescope on source' 2009-May-11 21:39:24 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2009-May-11 21:40:11 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-11 21:40:11 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2009-May-11 21:40:11 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-11 21:40:11 INFO2 waittrk: Now tracking AGESVC1_129 2009-May-11 21:40:11 LOG4 waittrk: Current telescope position: Az = 354.00 ZA = 10.99 2009-May-11 21:40:11 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-11 21:40:11 LOG5 finish_task: Level: (2) ID = <10175> Status = 0 0 0 0 ok 2009-May-11 21:40:11 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-11 21:40:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:40:11 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-11 21:40:11 LOG5 end_task: Level: (2) ID = <10175> Status = 0 0 0 0 ok 2009-May-11 21:40:11 START begin_task: Starting task 'selecting calibration type' 2009-May-11 21:40:11 LOG5 begin_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2009-May-11 21:40:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-11 21:40:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-11 21:40:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:40:11 START begin_task: Starting task 'waiting on setcal' 2009-May-11 21:40:11 LOG5 begin_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2009-May-11 21:40:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-11 21:40:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:40:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:40:11 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-11 21:40:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-11 21:40:11 LOG5 end_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2009-May-11 21:40:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-11 21:40:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-11 21:40:11 LOG5 end_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2009-May-11 21:40:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 em/th/rm 2009-May-11 21:40:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 em/th/rm 2009-May-11 21:40:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 em/th/rm 2009-May-11 21:40:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 em/th/rm 2009-May-11 21:40:11 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2009-May-11 21:40:11 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2009-May-11 21:40:11 START begin_task: Starting task 'clearing telescope offsets' 2009-May-11 21:40:11 LOG5 begin_task: Level: (2) ID = <10180> Status = 0 0 0 0 ok 2009-May-11 21:40:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2009-May-11 21:40:11 INFO3 clear_offsets: Removing telescope offsets 2009-May-11 21:40:11 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1_129" 2009-May-11 21:40:11 LOG3 vw_send: To DATATAKING: pnt tr 123652.000000 72528.000000 -CJ 2009-May-11 21:40:11 STOP finish_task: Finishing task 'clearing telescope offsets' 2009-May-11 21:40:11 LOG5 finish_task: Level: (2) ID = <10180> Status = 0 0 0 0 ok 2009-May-11 21:40:11 INFO2 finish_task: DONE finished clearing: telescope offsets 2009-May-11 21:40:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:40:11 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2009-May-11 21:40:11 LOG5 end_task: Level: (2) ID = <10180> Status = 0 0 0 0 ok 2009-May-11 21:40:11 START begin_task: Starting task 'waiting on telescope' 2009-May-11 21:40:11 LOG5 begin_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2009-May-11 21:40:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-May-11 21:40:11 LOG3 waittrk: Start waittrk 5 2009-May-11 21:40:11 START begin_task: Starting task 'waiting on telescope movement' 2009-May-11 21:40:11 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2009-May-11 21:40:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 em/th/rm' 2009-May-11 21:40:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:40:11 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1_129" 2009-May-11 21:40:11 LOG4 got_cormsg: From DATATAKING: pnt tr 123652.000000 72528.000000 -CJ 2009-May-11 21:40:11 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-11 21:40:12 NOTE WAPPDATA-new_file: New FITS file: wapp.20090511.a2048.0004.fits 2009-May-11 21:40:12 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090511.a2048.0004.fits} 2009-May-11 21:40:16 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-May-11 21:40:16 LOG5 end_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2009-May-11 21:40:16 START begin_task: Starting task 'waiting on telescope on source' 2009-May-11 21:40:16 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2009-May-11 21:40:19 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-May-11 21:40:19 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2009-May-11 21:40:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-May-11 21:40:19 INFO2 waittrk: Now tracking AGESVC1_129 2009-May-11 21:40:19 LOG4 waittrk: Current telescope position: Az = 354.17 ZA = 10.99 2009-May-11 21:40:19 STOP finish_task: Finishing task 'waiting on telescope' 2009-May-11 21:40:19 LOG5 finish_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2009-May-11 21:40:19 INFO2 finish_task: DONE finished waiting: telescope on source 2009-May-11 21:40:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:40:19 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-May-11 21:40:19 LOG5 end_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2009-May-11 21:40:19 LOG5 antvel: Calling 'antvel 123652.000000 72528.000000 J 0' 2009-May-11 21:40:19 LOG2 antvel: Precessing RA = 12:36:52.0 Dec = +07:25:28.0 Epoch = 2009.36113 J 2009-May-11 21:40:19 LOG2 antvel: Computed apparent RA = 12:37:22.3 Dec = +07:22:13.7 2009-May-11 21:40:19 LOG2 antvel: Parameters to Doppler: Heliocentric 92418 2009 131 0.0 2009-May-11 21:40:19 INFO5 antvel: Computed antenna velocity: +20.50851 km/s 2009-May-11 21:40:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=1634.000000 veltype=velocity(optical) calctype=SUBBAND antvel=20.508509453199999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-May-11 21:40:19 INFO4 dopset_gen: New sky frequencies: 1412.609252 1412.609252 1412.609252 1412.609252 1412.609252 1412.609252 1412.609252 1412.609252 1412.609252 2009-May-11 21:40:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1412.609252 sky0=1412.609252 sky1=1412.609252 sky2=1412.609252 sky3=1412.609252 sky4=1412.609252 sky5=1412.609252 sky6=1412.609252 sky7=1412.609252 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2009-May-11 21:40:19 LOG2 dopset_gen: Result from 'sky2syn': 11412.609252 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2009-May-11 21:40:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11412609252.0} 2009-May-11 21:40:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2009-May-11 21:40:19 START begin_task: Starting task 'adjusting WAPP power' 2009-May-11 21:40:19 LOG5 begin_task: Level: (2) ID = <10184> Status = 0 0 0 0 ok 2009-May-11 21:40:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-May-11 21:40:19 INFO2 adjust_power: Starting to adjust WAPP power 2009-May-11 21:40:19 LOG3 vw_send: To DATATAKING: adjpwrif1 2009-May-11 21:40:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2009-May-11 21:40:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:40:19 START begin_task: Starting task 'waiting on adjpwrif1' 2009-May-11 21:40:19 LOG5 begin_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2009-May-11 21:40:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11412609252.0} 2009-May-11 21:40:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2009-May-11 21:40:19 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2009-May-11 21:40:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:40:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:40:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:40:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:40:19 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-11 21:40:19 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2009-May-11 21:40:19 LOG5 end_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2009-May-11 21:40:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2009-May-11 21:40:19 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-May-11 21:40:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-May-11 21:40:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:40:19 START begin_task: Starting task 'waiting on adjpwrif2' 2009-May-11 21:40:19 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2009-May-11 21:40:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:40:19 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-May-11 21:40:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:40:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:40:21 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-11 21:40:21 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-May-11 21:40:21 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2009-May-11 21:40:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-May-11 21:40:21 START begin_task: Starting task 'adjusting WAPP power' 2009-May-11 21:40:21 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2009-May-11 21:40:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-May-11 21:40:21 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2009-May-11 21:40:21 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2009-May-11 21:40:21 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2009-May-11 21:40:21 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2009-May-11 21:40:21 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-May-11 21:40:21 LOG5 begin_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2009-May-11 21:40:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:40:21 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 12 7 dB 2009-May-11 21:40:21 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2009-May-11 21:40:21 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2009-May-11 21:40:21 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2009-May-11 21:40:21 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2009-May-11 21:40:21 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 14 7 dB 2009-May-11 21:40:21 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 7 11 dB 2009-May-11 21:40:21 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 7 13 dB 2009-May-11 21:40:21 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-May-11 21:40:22 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-May-11 21:40:22 LOG5 end_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2009-May-11 21:40:22 INFO2 wapp_adjpwr: WAPP power: 0.913 0.930 1.041 1.077 2009-May-11 21:40:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-11 21:40:22 LOG5 finish_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2009-May-11 21:40:22 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-May-11 21:40:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:40:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-11 21:40:22 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2009-May-11 21:40:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-11 21:40:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-May-11 21:40:22 LOG5 finish_task: Level: (2) ID = <10184> Status = 0 0 0 0 ok 2009-May-11 21:40:22 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-May-11 21:40:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:40:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-May-11 21:40:22 LOG5 end_task: Level: (2) ID = <10184> Status = 0 0 0 0 ok 2009-May-11 21:40:22 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2009-May-11 21:40:22 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON -' 2009-May-11 21:40:22 START begin_task: Starting task 'WAPP spectral observation' 2009-May-11 21:40:22 LOG5 begin_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2009-May-11 21:40:22 INFO2 take_data: Starting WAPP scan: 913100182 2009-May-11 21:40:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 2009-May-11 21:40:22 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-11 21:40:22 LOG5 begin_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2009-May-11 21:40:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-11 21:40:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6023.00 2009-May-11 21:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11412.609252 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2009-May-11 21:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1412.609252 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1412.609252 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1412.609252 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1412.609252 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:45:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-11 21:45:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-11 21:45:23 LOG5 end_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2009-May-11 21:45:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-11 21:45:23 LOG5 end_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2009-May-11 21:45:23 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2009-May-11 21:45:23 LOG2 onoff_wapp: Parameters: RA-offset: -90.706200000000123 arcminutes wait: 60 secs 2009-May-11 21:45:23 LOG4 track_offsets: Calling 'track_offsets -90.706200000000123 0.0 main small' 2009-May-11 21:45:23 START begin_task: Starting task 'sending telescope offsets' 2009-May-11 21:45:23 LOG5 begin_task: Level: (2) ID = <10191> Status = 0 0 0 0 ok 2009-May-11 21:45:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2009-May-11 21:45:23 INFO2 track_offsets: Starting to send new offsets 2009-May-11 21:45:23 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1_129" 2009-May-11 21:45:23 LOG3 vw_send: To DATATAKING: pnt tr 123652.000000 72528.000000 -CJ -o -UD -1.51177 0.0 -CH 2009-May-11 21:45:23 STOP finish_task: Finishing task 'sending telescope offsets' 2009-May-11 21:45:23 LOG5 finish_task: Level: (2) ID = <10191> Status = 0 0 0 0 ok 2009-May-11 21:45:23 INFO2 finish_task: DONE finished sending: telescope offsets 2009-May-11 21:45:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:45:23 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2009-May-11 21:45:23 LOG5 end_task: Level: (2) ID = <10191> Status = 0 0 0 0 ok 2009-May-11 21:45:23 INFO2 lstwait: Waiting for 59.8 secs from LST 12:38:15 to LST 12:39:15 ... 2009-May-11 21:45:23 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836176000002972 BITMAP stat_wait MESSAGE {Waiting ...} 2009-May-11 21:45:23 START begin_task: Starting task 'waiting on wait on LST' 2009-May-11 21:45:23 LOG5 begin_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2009-May-11 21:45:23 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1_129" 2009-May-11 21:45:23 LOG4 got_cormsg: From DATATAKING: pnt tr 123652.000000 72528.000000 -CJ -o -UD -1.51177 0.0 -CH 2009-May-11 21:45:23 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-11 21:45:56 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'AGESVC1_129' (after 33 seconds) 2009-May-11 21:46:23 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-May-11 21:46:23 LOG5 end_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2009-May-11 21:46:23 LOG4 lstwait: Finished waiting 0.17 seconds late 2009-May-11 21:46:23 INFO3 lstwait: Finished waiting 2009-May-11 21:46:23 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-May-11 21:46:23 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2009-May-11 21:46:23 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF -' 2009-May-11 21:46:23 START begin_task: Starting task 'WAPP spectral observation' 2009-May-11 21:46:23 LOG5 begin_task: Level: (2) ID = <10193> Status = 0 0 0 0 ok 2009-May-11 21:46:23 INFO2 take_data: Starting WAPP scan: 913100183 2009-May-11 21:46:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 2009-May-11 21:46:24 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-11 21:46:24 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2009-May-11 21:46:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-11 21:46:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6385.00 2009-May-11 21:46:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11412.609252 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2009-May-11 21:46:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1412.609252 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:46:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1412.609252 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:46:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1412.609252 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:46:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1412.609252 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:51:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-11 21:51:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-11 21:51:25 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2009-May-11 21:51:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-11 21:51:25 LOG5 end_task: Level: (2) ID = <10193> Status = 0 0 0 0 ok 2009-May-11 21:51:25 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2009-May-11 21:51:25 START begin_task: Starting task 'WAPP calibration' 2009-May-11 21:51:25 LOG5 begin_task: Level: (2) ID = <10195> Status = 0 0 0 0 ok 2009-May-11 21:51:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-May-11 21:51:25 START begin_task: Starting task 'selecting calibration type' 2009-May-11 21:51:25 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2009-May-11 21:51:25 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-May-11 21:51:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-May-11 21:51:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:51:25 START begin_task: Starting task 'waiting on setcal' 2009-May-11 21:51:25 LOG5 begin_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2009-May-11 21:51:25 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-May-11 21:51:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-May-11 21:51:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:51:25 LOG4 got_cormsg: From DATATAKING: DONE 2009-May-11 21:51:25 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-May-11 21:51:25 LOG5 end_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2009-May-11 21:51:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-May-11 21:51:25 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-May-11 21:51:25 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2009-May-11 21:51:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-May-11 21:51:25 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-May-11 21:51:25 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-May-11 21:51:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-11 21:51:25 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2009-May-11 21:51:26 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-11 21:51:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:51:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-May-11 21:51:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-11 21:51:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-11 21:51:26 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2009-May-11 21:51:26 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-May-11 21:51:26 LOG4 take_data: Calling 'take_data 10 10 CAL ON -' 2009-May-11 21:51:26 START begin_task: Starting task 'WAPP spectral observation' 2009-May-11 21:51:26 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2009-May-11 21:51:26 INFO2 take_data: Starting WAPP scan: 913100184 2009-May-11 21:51:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-11 21:51:26 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-11 21:51:26 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2009-May-11 21:51:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-11 21:51:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6687.00 2009-May-11 21:51:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11412.609252 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2009-May-11 21:51:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1412.609252 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:51:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1412.609252 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:51:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1412.609252 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:51:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1412.609252 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:51:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-11 21:51:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-11 21:51:37 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2009-May-11 21:51:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-11 21:51:37 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2009-May-11 21:51:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-May-11 21:51:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-May-11 21:51:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-May-11 21:51:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-May-11 21:51:37 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2009-May-11 21:51:37 LOG3 CALCONTROL-caltrig: Software trigger 2009-May-11 21:51:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-May-11 21:51:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-May-11 21:51:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-May-11 21:51:37 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2009-May-11 21:51:37 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-May-11 21:51:37 LOG4 take_data: Calling 'take_data 10 10 CAL OFF -' 2009-May-11 21:51:37 START begin_task: Starting task 'WAPP spectral observation' 2009-May-11 21:51:37 LOG5 begin_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2009-May-11 21:51:37 INFO2 take_data: Starting WAPP scan: 913100185 2009-May-11 21:51:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-May-11 21:51:38 START begin_task: Starting task 'waiting on WAPP spectra' 2009-May-11 21:51:38 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2009-May-11 21:51:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-May-11 21:51:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6699.00 2009-May-11 21:51:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11412.609252 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2009-May-11 21:51:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1412.609252 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:51:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1412.609252 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:51:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1412.609252 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:51:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1412.609252 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2009-May-11 21:51:49 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-May-11 21:51:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-May-11 21:51:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-May-11 21:51:49 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2009-May-11 21:51:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-May-11 21:51:49 LOG5 end_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2009-May-11 21:51:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-May-11 21:51:49 STOP finish_task: Finishing task 'WAPP calibration' 2009-May-11 21:51:49 LOG5 finish_task: Level: (2) ID = <10195> Status = 0 0 0 0 ok 2009-May-11 21:51:49 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-May-11 21:51:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:51:49 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-May-11 21:51:49 LOG5 end_task: Level: (2) ID = <10195> Status = 0 0 0 0 ok 2009-May-11 21:51:49 START begin_task: Starting task 'clearing telescope offsets' 2009-May-11 21:51:49 LOG5 begin_task: Level: (2) ID = <10204> Status = 0 0 0 0 ok 2009-May-11 21:51:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2009-May-11 21:51:49 INFO3 clear_offsets: Removing telescope offsets 2009-May-11 21:51:49 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1_129" 2009-May-11 21:51:49 LOG3 vw_send: To DATATAKING: pnt tr 123652.000000 72528.000000 -CJ 2009-May-11 21:51:49 STOP finish_task: Finishing task 'clearing telescope offsets' 2009-May-11 21:51:49 LOG5 finish_task: Level: (2) ID = <10204> Status = 0 0 0 0 ok 2009-May-11 21:51:49 INFO2 finish_task: DONE finished clearing: telescope offsets 2009-May-11 21:51:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-May-11 21:51:49 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2009-May-11 21:51:49 LOG5 end_task: Level: (2) ID = <10204> Status = 0 0 0 0 ok 2009-May-11 21:51:49 STOP finish_task: Finishing task 'standard on/off' 2009-May-11 21:51:49 LOG5 finish_task: Level: (1) ID = <10174> Status = 0 0 0 0 ok 2009-May-11 21:51:49 DONE finish_task: DONE finished pattern: standard on/off 2009-May-11 21:51:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-May-11 21:51:49 END end_task: Finishing task 'standard on/off' with status 'OK' 2009-May-11 21:51:49 LOG5 end_task: Level: (1) ID = <10174> Status = 0 0 0 0 ok 2009-May-11 21:51:49 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1_129" 2009-May-11 21:51:49 LOG4 got_cormsg: From DATATAKING: pnt tr 123652.000000 72528.000000 -CJ 2009-May-11 21:51:49 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-May-11 21:52:52 ALERT CIMA-exit_cima: Exiting CIMA ... 2009-May-11 21:52:52 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2009-May-11 21:52:52 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2009-May-11 21:52:52 LOG3 vw_send: To DATATAKING: mvdata a2048 2009-May-11 21:52:52 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2009-May-11 21:52:52 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2009-May-11 21:52:52 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2009-May-11 21:52:52 NOTE CIMA-exit_cima: Cleaning up session ... 2009-May-11 21:52:52 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2009-May-11 21:52:52 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2009-May-11 21:52:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:52:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-May-11 21:52:54 LOG3 exec_msg: Closing socket