2009-Apr-21 18:46:09 BEGIN executive: CIMA executive starting ... 2009-Apr-21 18:46:09 NOTE executive: STARTING NEW CIMA SESSION 2009-Apr-21 18:46:09 INFO1 executive: Using CIMA version 3.1.04 'smart' from 2009-04-21 11:22 2009-Apr-21 18:46:09 INFO4 executive: This is an ON-LINE session 2009-Apr-21 18:46:09 INFO4 executive: This is a REMOTE session 2009-Apr-21 18:46:09 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Apr-21 18:46:09 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'E. Momjian' 2009-Apr-21 18:46:09 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20090421' 2009-Apr-21 18:46:11 LOG2 log_preferences: Currently applied preferences: 2009-Apr-21 18:46:11 LOG2 log_preferences: prefs(dailylog) = daily 2009-Apr-21 18:46:11 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Apr-21 18:46:11 LOG2 log_preferences: prefs(datawindow) = ignore 2009-Apr-21 18:46:11 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Apr-21 18:46:11 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Apr-21 18:46:11 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Apr-21 18:46:11 LOG2 log_preferences: prefs(logcolours) = full 2009-Apr-21 18:46:11 LOG2 log_preferences: prefs(displaylevel) = INFO3 2009-Apr-21 18:46:11 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Apr-21 18:46:11 LOG2 log_preferences: prefs(displayformat) = short 2009-Apr-21 18:46:11 LOG2 log_preferences: prefs(logformat) = new 2009-Apr-21 18:46:11 LOG2 log_preferences: prefs(fontsize) = 4 2009-Apr-21 18:46:11 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-21 18:46:11 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2009-Apr-21 18:46:11 ALERT executive: CIMA executive ready 2009-Apr-21 18:46:13 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2009-Apr-21 18:46:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:46:13 LOG4 got_cormsg: From DATATAKING: setup 2009-Apr-21 18:46:14 NOTE frontend: CIMA frontend ready 2009-Apr-21 18:46:20 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2009-Apr-21 18:46:20 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2009-Apr-21 18:46:20 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Apr-21 18:46:20 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Apr-21 18:46:20 LOG4 got_cormsg: From DATATAKING: 2009-Apr-21 18:46:20 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2009-Apr-21 18:46:20 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Apr-21 18:46:20 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Apr-21 18:46:20 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Apr-21 18:46:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Apr-21 18:46:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Apr-21 18:46:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Apr-21 18:46:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Apr-21 18:46:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Apr-21 18:46:20 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Apr-21 18:46:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:46:20 LOG4 got_cormsg: From DATATAKING: online.. exit cmd to quit. 2009-Apr-21 18:46:20 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-21 18:46:20 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2009-Apr-21 18:46:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:46:20 LOG4 got_cormsg: From DATATAKING: 2009-Apr-21 18:46:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:46:53 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Apr-21 18:46:53 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Apr-21 18:46:53 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Apr-21 18:46:53 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-21 18:46:53 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-21 18:46:53 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-21 18:46:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-21 18:46:53 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-21 18:46:53 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-21 18:46:53 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-21 18:46:53 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-21 18:46:53 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-21 18:46:53 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Apr-21 18:46:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-21 18:46:53 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-21 18:46:53 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-21 18:46:54 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-21 18:46:54 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-21 18:47:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:47:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:47:23 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-21 18:47:23 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-21 18:47:23 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-21 18:47:23 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-21 18:47:23 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-21 18:47:24 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-21 18:47:24 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-21 18:47:24 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-21 18:47:24 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-21 18:47:24 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-21 18:47:27 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-21 18:47:27 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-21 18:47:27 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-21 18:47:27 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-21 18:48:51 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc.cmd' 2009-Apr-21 18:49:07 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc.cmd' to executive ... 2009-Apr-21 18:49:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_ages.conf} 2009-Apr-21 18:49:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2009-Apr-21 18:49:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2009-Apr-21 18:49:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2009-Apr-21 18:49:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2009-Apr-21 18:49:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2009-Apr-21 18:49:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2009-Apr-21 18:49:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2009-Apr-21 18:49:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2009-Apr-21 18:49:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2009-Apr-21 18:49:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2009-Apr-21 18:49:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2009-Apr-21 18:49:07 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2009-Apr-21 18:49:07 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Apr-21 18:49:07 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 13 2009-Apr-21 18:49:07 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 13' 2009-Apr-21 18:49:07 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2009-Apr-21 18:49:07 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-21 18:49:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2009-Apr-21 18:49:07 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2009-Apr-21 18:49:07 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2009-Apr-21 18:49:07 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Apr-21 18:49:17 ERROR execute_load: ERROR can't use the IF/LO file 'togs_ages.conf'! 2009-Apr-21 18:49:17 LOG1 task_failed: Task 'running command file 'command_galfasrc.cmd'' failed! 2009-Apr-21 18:49:17 LOG5 task_failed: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-21 18:49:17 ALERT run_command_file: Stopping command file processing at line 5! 2009-Apr-21 18:49:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Apr-21 18:49:17 STOP finish_task: Finishing task 'running command file 'command_galfasrc.cmd'' 2009-Apr-21 18:49:17 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 1 failed 2009-Apr-21 18:49:17 ERROR finish_task: ERROR failed running: command file 'command_galfasrc.cmd' 2009-Apr-21 18:49:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2009-Apr-21 18:49:17 END end_task: Finishing task 'running command file 'command_galfasrc.cmd'' with status 'FAILED' 2009-Apr-21 18:49:17 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 1 failed 2009-Apr-21 18:52:29 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc.cmd' 2009-Apr-21 18:52:48 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc.cmd' to executive ... 2009-Apr-21 18:52:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_ages.conf} 2009-Apr-21 18:52:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2009-Apr-21 18:52:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2009-Apr-21 18:52:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2009-Apr-21 18:52:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2009-Apr-21 18:52:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2009-Apr-21 18:52:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2009-Apr-21 18:52:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2009-Apr-21 18:52:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2009-Apr-21 18:52:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2009-Apr-21 18:52:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2009-Apr-21 18:52:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2009-Apr-21 18:52:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2009-Apr-21 18:52:49 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Apr-21 18:52:49 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 13 2009-Apr-21 18:52:49 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 13' 2009-Apr-21 18:52:49 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2009-Apr-21 18:52:49 LOG5 begin_task: Level: (1) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-21 18:52:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2009-Apr-21 18:52:49 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2009-Apr-21 18:52:49 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2009-Apr-21 18:52:49 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Apr-21 18:52:59 ERROR execute_load: ERROR can't use the IF/LO file 'togs_ages.conf'! 2009-Apr-21 18:52:59 LOG1 task_failed: Task 'running command file 'command_galfasrc.cmd'' failed! 2009-Apr-21 18:52:59 LOG5 task_failed: Level: (1) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-21 18:52:59 ALERT run_command_file: Stopping command file processing at line 5! 2009-Apr-21 18:52:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Apr-21 18:52:59 STOP finish_task: Finishing task 'running command file 'command_galfasrc.cmd'' 2009-Apr-21 18:52:59 LOG5 finish_task: Level: (1) ID = <10004> Status = 0 0 0 1 failed 2009-Apr-21 18:52:59 ERROR finish_task: ERROR failed running: command file 'command_galfasrc.cmd' 2009-Apr-21 18:52:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2009-Apr-21 18:52:59 END end_task: Finishing task 'running command file 'command_galfasrc.cmd'' with status 'FAILED' 2009-Apr-21 18:52:59 LOG5 end_task: Level: (1) ID = <10004> Status = 0 0 0 1 failed 2009-Apr-21 18:53:27 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Apr-21 18:53:27 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 13 2009-Apr-21 18:53:27 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 13' 2009-Apr-21 18:53:27 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2009-Apr-21 18:53:27 LOG5 begin_task: Level: (1) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-21 18:53:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2009-Apr-21 18:53:27 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2009-Apr-21 18:53:27 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2009-Apr-21 18:53:27 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Apr-21 18:53:37 ERROR execute_load: ERROR can't use the IF/LO file 'togs_ages.conf'! 2009-Apr-21 18:53:37 LOG1 task_failed: Task 'running command file 'command_galfasrc.cmd'' failed! 2009-Apr-21 18:53:37 LOG5 task_failed: Level: (1) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-21 18:53:37 ALERT run_command_file: Stopping command file processing at line 5! 2009-Apr-21 18:53:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Apr-21 18:53:37 STOP finish_task: Finishing task 'running command file 'command_galfasrc.cmd'' 2009-Apr-21 18:53:37 LOG5 finish_task: Level: (1) ID = <10005> Status = 0 0 0 1 failed 2009-Apr-21 18:53:37 ERROR finish_task: ERROR failed running: command file 'command_galfasrc.cmd' 2009-Apr-21 18:53:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2009-Apr-21 18:53:37 END end_task: Finishing task 'running command file 'command_galfasrc.cmd'' with status 'FAILED' 2009-Apr-21 18:53:37 LOG5 end_task: Level: (1) ID = <10005> Status = 0 0 0 1 failed 2009-Apr-21 18:54:42 INFO4 CIMA-load_command_file: Loaded command file '090421.cmd' 2009-Apr-21 18:54:48 INFO1 CIMA-run_command_file: Transferring command file '090421.cmd' to executive ... 2009-Apr-21 18:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2009-Apr-21 18:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2009-Apr-21 18:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 5 {CATALOG AGESFull.cat} 2009-Apr-21 18:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF LSTSLEW(AGES3193_p2_084) < 090532 THEN} 2009-Apr-21 18:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {FIXEDDRIFT az=251.16 alfaangle=-53.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_084 ra=95300.00 dec=214830.00} 2009-Apr-21 18:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {ENDIF} 2009-Apr-21 18:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 15 {IF LSTSLEW(AGES3193_p2_086) < 092832 THEN} 2009-Apr-21 18:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 16 {FIXEDDRIFT az=239.18 alfaangle=-38.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_086 ra=95300.00 dec=214530.00} 2009-Apr-21 18:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 19 {ENDIF} 2009-Apr-21 18:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 22 {IF LSTSLEW(AGES3193_p2_088) < 095132 THEN} 2009-Apr-21 18:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 23 {FIXEDDRIFT az=187.99 alfaangle=12.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_088 ra=95300.00 dec=214230.00} 2009-Apr-21 18:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 26 {ENDIF} 2009-Apr-21 18:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 29 {IF LSTSLEW(AGES3193_p2_090) < 101532 THEN} 2009-Apr-21 18:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 30 {FIXEDDRIFT az=123.16 alfaangle=73.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_090 ra=95300.00 dec=213930.00} 2009-Apr-21 18:54:48 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 33 {ENDIF} 2009-Apr-21 18:54:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 36 {IF LSTSLEW(AGES3193_p2_092) < 103832 THEN} 2009-Apr-21 18:54:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 37 {FIXEDDRIFT az=108.76 alfaangle=-88.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_092 ra=95300.00 dec=213630.00} 2009-Apr-21 18:54:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 40 {ENDIF} 2009-Apr-21 18:54:49 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Apr-21 18:54:49 LOG4 exec_msg: From OBSERVER: run_command_file 090421.cmd 1 1 18 2009-Apr-21 18:54:49 LOG4 run_command_file: Calling 'run_command_file 090421.cmd 1 1 18' 2009-Apr-21 18:54:49 BEGIN begin_task: Starting task 'running command file '090421.cmd'' 2009-Apr-21 18:54:49 LOG5 begin_task: Level: (1) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-21 18:54:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '090421.cmd' ...} 2009-Apr-21 18:54:49 NOTE run_command_file: Starting execution of command file '090421.cmd' from line 1 2009-Apr-21 18:54:49 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2009-Apr-21 18:54:49 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Apr-21 18:54:59 ERROR execute_load: ERROR can't use the IF/LO file 'ages_config.conf'! 2009-Apr-21 18:54:59 LOG1 task_failed: Task 'running command file '090421.cmd'' failed! 2009-Apr-21 18:54:59 LOG5 task_failed: Level: (1) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-21 18:54:59 ALERT run_command_file: Stopping command file processing at line 3! 2009-Apr-21 18:54:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Apr-21 18:54:59 STOP finish_task: Finishing task 'running command file '090421.cmd'' 2009-Apr-21 18:54:59 LOG5 finish_task: Level: (1) ID = <10006> Status = 0 0 0 1 failed 2009-Apr-21 18:54:59 ERROR finish_task: ERROR failed running: command file '090421.cmd' 2009-Apr-21 18:54:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2009-Apr-21 18:54:59 END end_task: Finishing task 'running command file '090421.cmd'' with status 'FAILED' 2009-Apr-21 18:54:59 LOG5 end_task: Level: (1) ID = <10006> Status = 0 0 0 1 failed 2009-Apr-21 18:55:33 ALERT CIMA-exit_cima: Exiting CIMA ... 2009-Apr-21 18:55:33 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2009-Apr-21 18:55:33 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2009-Apr-21 18:55:33 LOG3 vw_send: To DATATAKING: mvdata a2048 2009-Apr-21 18:55:33 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2009-Apr-21 18:55:33 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2009-Apr-21 18:55:33 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2009-Apr-21 18:55:33 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2009-Apr-21 18:55:33 NOTE CIMA-exit_cima: Cleaning up session ... 2009-Apr-21 18:55:33 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2009-Apr-21 18:55:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:55:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:55:35 LOG3 exec_msg: Closing socket 2009-Apr-21 18:56:30 BEGIN executive: CIMA executive starting ... 2009-Apr-21 18:56:31 NOTE executive: STARTING NEW CIMA SESSION 2009-Apr-21 18:56:31 INFO1 executive: Using CIMA version 3.0.10 'normal' from 2008-12-29 17:18 2009-Apr-21 18:56:31 INFO4 executive: This is an ON-LINE session 2009-Apr-21 18:56:31 INFO4 executive: This is a REMOTE session 2009-Apr-21 18:56:31 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Apr-21 18:56:31 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'E. Momjian' 2009-Apr-21 18:56:31 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20090421' 2009-Apr-21 18:56:31 LOG2 log_preferences: Currently applied preferences: 2009-Apr-21 18:56:31 LOG2 log_preferences: prefs(dailylog) = daily 2009-Apr-21 18:56:31 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Apr-21 18:56:31 LOG2 log_preferences: prefs(datawindow) = ignore 2009-Apr-21 18:56:31 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Apr-21 18:56:31 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Apr-21 18:56:31 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Apr-21 18:56:31 LOG2 log_preferences: prefs(logcolours) = full 2009-Apr-21 18:56:31 LOG2 log_preferences: prefs(displaylevel) = INFO3 2009-Apr-21 18:56:31 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Apr-21 18:56:31 LOG2 log_preferences: prefs(displayformat) = short 2009-Apr-21 18:56:31 LOG2 log_preferences: prefs(logformat) = new 2009-Apr-21 18:56:31 LOG2 log_preferences: prefs(fontsize) = 4 2009-Apr-21 18:56:31 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-21 18:56:32 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2009-Apr-21 18:56:32 ALERT executive: CIMA executive ready 2009-Apr-21 18:56:35 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2009-Apr-21 18:56:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:56:35 LOG4 got_cormsg: From DATATAKING: setup 2009-Apr-21 18:56:35 NOTE frontend: CIMA frontend ready 2009-Apr-21 18:56:37 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Apr-21 18:56:37 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Apr-21 18:56:37 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Apr-21 18:56:37 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-21 18:56:37 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-21 18:56:38 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-21 18:56:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-21 18:56:38 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2009-Apr-21 18:56:38 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-21 18:56:38 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-21 18:56:38 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-21 18:56:38 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-21 18:56:38 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Apr-21 18:56:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-21 18:56:38 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-21 18:56:38 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-21 18:56:41 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2009-Apr-21 18:56:41 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2009-Apr-21 18:56:41 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Apr-21 18:56:41 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Apr-21 18:56:41 LOG4 got_cormsg: From DATATAKING: 2009-Apr-21 18:56:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:56:41 LOG4 got_cormsg: From DATATAKING: tape stat 2009-Apr-21 18:56:41 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Apr-21 18:56:41 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Apr-21 18:56:41 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Apr-21 18:56:41 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Apr-21 18:56:41 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Apr-21 18:56:41 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Apr-21 18:56:41 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Apr-21 18:56:41 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Apr-21 18:56:42 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Apr-21 18:56:42 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Apr-21 18:56:42 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-21 18:56:42 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2009-Apr-21 18:56:42 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2009-Apr-21 18:56:42 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-21 18:56:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:56:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:56:46 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-21 18:56:46 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-21 18:56:46 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-21 18:56:46 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-21 18:56:46 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-21 18:56:46 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-21 18:56:46 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-21 18:56:46 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-21 18:56:46 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-21 18:56:46 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-21 18:56:49 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-21 18:56:49 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-21 18:56:49 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-21 18:56:49 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-21 18:56:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:56:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:15 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc.cmd ' to executive ... 2009-Apr-21 18:57:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_ages.conf} 2009-Apr-21 18:57:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2009-Apr-21 18:57:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2009-Apr-21 18:57:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2009-Apr-21 18:57:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2009-Apr-21 18:57:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2009-Apr-21 18:57:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2009-Apr-21 18:57:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2009-Apr-21 18:57:16 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2009-Apr-21 18:57:16 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2009-Apr-21 18:57:16 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2009-Apr-21 18:57:16 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2009-Apr-21 18:57:16 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2009-Apr-21 18:57:16 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Apr-21 18:57:16 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc.cmd 1 1 13 2009-Apr-21 18:57:16 LOG4 run_command_file: Calling 'run_command_file command_galfasrc.cmd 1 1 13' 2009-Apr-21 18:57:16 BEGIN begin_task: Starting task 'running command file 'command_galfasrc.cmd'' 2009-Apr-21 18:57:16 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-21 18:57:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc.cmd' ...} 2009-Apr-21 18:57:16 NOTE run_command_file: Starting execution of command file 'command_galfasrc.cmd' from line 1 2009-Apr-21 18:57:16 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_ages.conf' 2009-Apr-21 18:57:16 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Apr-21 18:57:16 NOTE CIMA-check_config_file: File 'togs_ages.conf' contains a observing mode set-up which will be ignored! 2009-Apr-21 18:57:16 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-21 18:57:16 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Apr-21 18:57:16 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2009-Apr-21 18:57:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-21 18:57:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-21 18:57:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-21 18:57:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-21 18:57:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-21 18:57:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Apr-21 18:57:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-21 18:57:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2009-Apr-21 18:57:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2009-Apr-21 18:57:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-21 18:57:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-21 18:57:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-21 18:57:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-21 18:57:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-21 18:57:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-21 18:57:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-21 18:57:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-21 18:57:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-21 18:57:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-21 18:57:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-21 18:57:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-21 18:57:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-21 18:57:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-21 18:57:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-21 18:57:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-21 18:57:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-21 18:57:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-21 18:57:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-21 18:57:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-21 18:57:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-21 18:57:18 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-21 18:57:18 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-21 18:57:18 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-21 18:57:18 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-21 18:57:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-21 18:57:18 INFO1 config_iflo: Selecting receiver ALFA 2009-Apr-21 18:57:18 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Apr-21 18:57:18 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-Apr-21 18:57:18 START begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-21 18:57:18 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-21 18:57:18 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-21 18:57:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-21 18:57:18 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2009-Apr-21 18:57:18 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-21 18:57:18 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-21 18:57:18 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-21 18:57:18 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-21 18:57:18 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Apr-21 18:57:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 18:57:18 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-21 18:57:18 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-21 18:57:18 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Apr-21 18:57:18 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-21 18:57:18 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Apr-21 18:57:18 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-21 18:57:18 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Apr-21 18:57:18 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Apr-21 18:57:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-21 18:57:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-21 18:57:18 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-21 18:57:18 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-21 18:57:18 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2009-Apr-21 18:57:18 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-21 18:57:19 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-21 18:57:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-21 18:57:19 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-21 18:57:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-21 18:57:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-21 18:57:19 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Apr-21 18:57:19 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Apr-21 18:57:19 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-21 18:57:19 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-21 18:57:19 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Apr-21 18:57:19 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-21 18:57:19 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Apr-21 18:57:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2009-Apr-21 18:57:19 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-21 18:57:19 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Apr-21 18:57:19 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-21 18:57:19 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-21 18:57:19 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-21 18:57:19 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-21 18:57:19 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-21 18:57:19 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Apr-21 18:57:19 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-21 18:57:19 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Apr-21 18:57:19 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-21 18:57:19 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-21 18:57:19 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-21 18:57:19 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-21 18:57:19 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-21 18:57:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 18:57:19 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-21 18:57:19 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Apr-21 18:57:19 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-21 18:57:19 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-21 18:57:19 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Apr-21 18:57:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-21 18:57:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 18:57:19 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-21 18:57:19 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-21 18:57:19 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Apr-21 18:57:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Apr-21 18:57:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Apr-21 18:57:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-21 18:57:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Apr-21 18:57:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2009-Apr-21 18:57:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-21 18:57:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Apr-21 18:57:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Apr-21 18:57:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-21 18:57:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Apr-21 18:57:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-21 18:57:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-21 18:57:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-21 18:57:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-21 18:57:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 18:57:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-21 18:57:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Apr-21 18:57:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-21 18:57:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Apr-21 18:57:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 18:57:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:34 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-21 18:57:34 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-21 18:57:34 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-21 18:57:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-21 18:57:35 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-21 18:57:35 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-21 18:57:35 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-21 18:57:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-21 18:57:35 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-21 18:57:35 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-21 18:57:35 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-21 18:57:35 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-21 18:57:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-21 18:57:35 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-21 18:57:35 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-21 18:57:35 START begin_task: Starting task 'selecting calibration port' 2009-Apr-21 18:57:35 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-21 18:57:35 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-21 18:57:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-21 18:57:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 18:57:35 START begin_task: Starting task 'waiting on calport' 2009-Apr-21 18:57:35 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-21 18:57:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:35 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-21 18:57:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 18:57:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:35 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-21 18:57:35 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-21 18:57:35 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-21 18:57:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-21 18:57:35 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-21 18:57:35 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-21 18:57:35 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-21 18:57:35 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-21 18:57:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-21 18:57:35 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-21 18:57:35 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-21 18:57:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-21 18:57:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-21 18:57:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-21 18:57:35 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-21 18:57:35 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-21 18:57:35 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-21 18:57:35 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-21 18:57:35 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-21 18:57:35 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-21 18:57:35 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-21 18:57:35 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-21 18:57:35 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-21 18:57:35 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-Apr-21 18:57:35 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-Apr-21 18:57:35 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-Apr-21 18:57:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-Apr-21 18:57:35 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-21 18:57:35 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-21 18:57:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-21 18:57:35 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-21 18:57:35 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-21 18:57:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-21 18:57:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-21 18:57:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-21 18:57:35 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-21 18:57:35 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-Apr-21 18:57:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-Apr-21 18:57:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-Apr-21 18:57:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-Apr-21 18:57:36 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-21 18:57:36 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-21 18:57:36 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-21 18:57:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-21 18:57:36 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-21 18:57:36 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-21 18:57:36 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2009-Apr-21 18:57:36 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2009-Apr-21 18:57:36 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2009-Apr-21 18:57:36 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2009-Apr-21 18:57:36 INFO5 is_if_valid: Condition parsed as: 0 2009-Apr-21 18:57:36 INFO1 is_if_valid: Skipping line 'IF isup(galfasrc) then' 2009-Apr-21 18:57:36 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2009-Apr-21 18:57:36 INFO1 run_command_line: Skipping line 'GOTO galfasrc' in non-true conditional branch 2009-Apr-21 18:57:36 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2009-Apr-21 18:57:36 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc2) 2009-Apr-21 18:57:36 INFO5 is_if_valid: Condition parsed as: 1 2009-Apr-21 18:57:36 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2009-Apr-21 18:57:36 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc2 nooffset nowait' 2009-Apr-21 18:57:36 BEGIN begin_task: Starting task 'tracking source 'galfasrc2'' 2009-Apr-21 18:57:36 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-21 18:57:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc2' ...} 2009-Apr-21 18:57:37 LOG3 track_source: Calling 'track_source galfasrc2 094300.0 +215300 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2009-Apr-21 18:57:37 START begin_task: Starting task 'sending tracking commands' 2009-Apr-21 18:57:37 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-21 18:57:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc2} INFO {Slewing to source 'galfasrc2' ...} 2009-Apr-21 18:57:37 INFO1 track_source: Starting to track galfasrc2 2009-Apr-21 18:57:37 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc2" 2009-Apr-21 18:57:37 LOG3 vw_send: To DATATAKING: set ra 094300.0 2009-Apr-21 18:57:37 LOG3 vw_send: To DATATAKING: set dec +215300 2009-Apr-21 18:57:37 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-21 18:57:37 LOG3 vw_send: To DATATAKING: pnt tr 094300.0 +215300 -CJ 2009-Apr-21 18:57:37 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-21 18:57:37 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-21 18:57:37 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-21 18:57:37 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-21 18:57:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 18:57:37 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-21 18:57:37 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-21 18:57:37 STOP finish_task: Finishing task 'tracking source 'galfasrc2'' 2009-Apr-21 18:57:37 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-21 18:57:37 DONE finish_task: DONE finished tracking: source 'galfasrc2' 2009-Apr-21 18:57:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-21 18:57:37 END end_task: Finishing task 'tracking source 'galfasrc2'' with status 'OK' 2009-Apr-21 18:57:37 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-21 18:57:37 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2009-Apr-21 18:57:37 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2009-Apr-21 18:57:37 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2009-Apr-21 18:57:37 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2009-Apr-21 18:57:37 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2009-Apr-21 18:57:37 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2009-Apr-21 18:57:37 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2009-Apr-21 18:57:37 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2009-Apr-21 18:57:37 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Apr-21 18:57:37 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-21 18:57:37 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-21 18:57:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-21 18:57:37 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-21 18:57:37 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-21 18:57:37 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-21 18:57:37 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-21 18:57:37 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-21 18:57:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-Apr-21 18:57:37 NOTE WAPPDATA-new_file: New FITS file: wapp.20090421.a2048.0000.fits 2009-Apr-21 18:57:37 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc2" 2009-Apr-21 18:57:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-21 18:57:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-21 18:57:37 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090421.a2048.0000.fits} 2009-Apr-21 18:57:37 LOG4 got_cormsg: From DATATAKING: set ra 094300.0 2009-Apr-21 18:57:37 LOG4 got_cormsg: From DATATAKING: set dec +215300 2009-Apr-21 18:57:37 LOG4 got_cormsg: From DATATAKING: vw% 094300.0 2009-Apr-21 18:57:37 LOG4 got_cormsg: From DATATAKING: vw% +215300 2009-Apr-21 18:57:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:37 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-21 18:57:37 LOG4 got_cormsg: From DATATAKING: pnt tr 094300.0 +215300 -CJ 2009-Apr-21 18:57:37 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-21 18:57:37 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-21 18:57:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 18:57:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-Apr-21 18:57:40 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-21 18:57:40 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-21 18:57:40 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-21 18:57:40 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-21 18:57:40 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-21 18:57:40 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-21 18:57:40 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-21 18:57:40 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-21 18:57:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-21 18:57:40 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-21 18:57:40 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-21 18:57:40 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2009-Apr-21 18:57:40 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Apr-21 18:57:40 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-21 18:57:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-21 18:57:40 LOG3 waittrk: Start waittrk 5 2009-Apr-21 18:57:40 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-21 18:57:40 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-21 18:57:46 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-21 18:57:46 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-21 18:57:46 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-21 18:57:46 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-21 19:00:42 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-21 19:00:42 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-21 19:00:42 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-21 19:00:42 INFO2 waittrk: Now tracking galfasrc2 2009-Apr-21 19:00:42 LOG4 waittrk: Current telescope position: Az = 254.59 ZA = 16.64 2009-Apr-21 19:00:42 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-21 19:00:42 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-21 19:00:42 DONE finish_task: DONE finished waiting: telescope on source 2009-Apr-21 19:00:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-21 19:00:42 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-21 19:00:42 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-21 19:00:42 COMMAND run_command_line: EXECUTING command 20: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2009-Apr-21 19:00:43 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Apr-21 19:00:45 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-21 19:00:45 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2009-Apr-21 19:00:45 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Apr-21 19:00:45 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-21 19:00:45 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc2' 2009-Apr-21 19:00:45 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Apr-21 19:00:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Apr-21 19:00:45 START begin_task: Starting task 'selecting calibration type' 2009-Apr-21 19:00:45 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-21 19:00:45 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-21 19:00:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-21 19:00:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 19:00:45 START begin_task: Starting task 'waiting on setcal' 2009-Apr-21 19:00:45 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-21 19:00:45 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-21 19:00:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 19:00:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:00:45 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-21 19:00:45 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-21 19:00:45 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-21 19:00:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-21 19:00:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-21 19:00:45 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-21 19:00:45 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-21 19:00:45 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-21 19:00:45 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-21 19:00:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-21 19:00:45 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-21 19:00:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-21 19:00:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-21 19:00:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-21 19:00:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-21 19:00:45 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-21 19:00:45 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-21 19:00:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:00:46 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-21 19:00:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-21 19:00:46 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-21 19:00:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-21 19:00:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-21 19:00:46 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-21 19:00:46 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-21 19:00:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-Apr-21 19:00:46 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-Apr-21 19:00:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-Apr-21 19:00:46 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-Apr-21 19:00:46 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090421.a2048.0000.fits' is empty! 2009-Apr-21 19:00:46 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Apr-21 19:00:46 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-21 19:00:46 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-21 19:00:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-21 19:00:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-21 19:00:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-21 19:00:46 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-21 19:00:46 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-21 19:00:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-21 19:00:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-21 19:00:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-21 19:00:46 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-21 19:00:46 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-21 19:00:46 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-21 19:00:46 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-21 19:00:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-21 19:00:46 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-21 19:00:46 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-21 19:00:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-21 19:00:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 19:00:46 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-21 19:00:46 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-21 19:00:46 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-21 19:00:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 19:00:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-Apr-21 19:00:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:00:49 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-21 19:00:49 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-21 19:00:49 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-21 19:00:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-21 19:00:49 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-21 19:00:49 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-21 19:00:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-21 19:00:49 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-21 19:00:49 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-21 19:00:49 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-21 19:00:49 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-21 19:00:49 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-21 19:00:49 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-21 19:00:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-21 19:00:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:00:50 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 7 dB 2009-Apr-21 19:00:50 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2009-Apr-21 19:00:50 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 3 dB 2009-Apr-21 19:00:50 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-21 19:00:50 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-21 19:00:50 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-21 19:00:50 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-21 19:00:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.927 0.983 ALFA beam 1: 0.978 0.970 2009-Apr-21 19:00:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.093 1.086 ALFA beam 3: 0.964 0.963 2009-Apr-21 19:00:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.977 1.020 ALFA beam 5: 0.950 1.011 2009-Apr-21 19:00:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.983 0.102 ALFA beam 7: 1.093 0.126 2009-Apr-21 19:00:50 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-21 19:00:50 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-21 19:00:50 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-21 19:00:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 19:00:50 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-21 19:00:50 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-21 19:00:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-21 19:00:50 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-21 19:00:50 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-21 19:00:50 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-21 19:00:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 19:00:50 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-21 19:00:50 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-21 19:00:50 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2009-Apr-21 19:00:50 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2009-Apr-21 19:00:50 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-Apr-21 19:00:50 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:00:50 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30607 J 2009-Apr-21 19:00:50 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:00:50 LOG2 antvel: Parameters to Doppler: Topocentric 82849 2009 111 0.0 2009-Apr-21 19:00:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:00:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-Apr-21 19:00:50 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-Apr-21 19:00:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:00:50 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:00:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Apr-21 19:00:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:00:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Apr-21 19:00:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:00:50 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-21 19:00:50 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.573004 2009.3060704552945 18.999933 2009-Apr-21 19:00:50 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333347 2009-Apr-21 19:00:50 LOG4 log_alfabeam: ALFABEAM 1 9.709435570392063 21.849670947111946 2009-Apr-21 19:00:50 LOG4 log_alfabeam: ALFABEAM 2 9.715165310732781 21.792651431663884 2009-Apr-21 19:00:50 LOG4 log_alfabeam: ALFABEAM 3 9.722403769335717 21.825921141087349 2009-Apr-21 19:00:50 LOG4 log_alfabeam: ALFABEAM 4 9.723897495492885 21.917133151570187 2009-Apr-21 19:00:50 LOG4 log_alfabeam: ALFABEAM 5 9.718134892572815 21.974290458706140 2009-Apr-21 19:00:50 LOG4 log_alfabeam: ALFABEAM 6 9.710911595391403 21.940098285559877 2009-Apr-21 19:00:50 INFO2 take_data: Starting WAPP+GALFA scan: 911100209 2009-Apr-21 19:00:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:00:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:00:51 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-21 19:00:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:00:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Apr-21 19:00:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:00:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:00:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:00:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82852.00 2009-Apr-21 19:00:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:00:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:00:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:00:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:00:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:00:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:00:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:00:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:00:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:00:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-21 19:00:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 0.983 0.978 0.970 2009-Apr-21 19:00:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 1.086 0.964 0.963 2009-Apr-21 19:00:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.043 1.072 1.027 1.076 2009-Apr-21 19:00:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.106 1.134 0.130 2009-Apr-21 19:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.139 (still bad) 2009-Apr-21 19:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-21 19:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.136 (still bad) 2009-Apr-21 19:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.145 (still bad) 2009-Apr-21 19:01:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:01:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:01:02 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-21 19:01:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:01:02 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-21 19:01:02 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2009-Apr-21 19:01:02 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2009-Apr-21 19:01:02 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2009-Apr-21 19:01:02 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:01:02 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30607 J 2009-Apr-21 19:01:02 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:01:02 LOG2 antvel: Parameters to Doppler: Topocentric 82862 2009 111 0.0 2009-Apr-21 19:01:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:01:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2009-Apr-21 19:01:02 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2009-Apr-21 19:01:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:01:02 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:01:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Apr-21 19:01:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:01:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Apr-21 19:01:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:01:02 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-21 19:01:02 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.576625 2009.3060708672397 18.999933 2009-Apr-21 19:01:02 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333333 2009-Apr-21 19:01:02 LOG4 log_alfabeam: ALFABEAM 1 9.709437548199878 21.849588900302344 2009-Apr-21 19:01:02 LOG4 log_alfabeam: ALFABEAM 2 9.715170585270094 21.792634800806070 2009-Apr-21 19:01:02 LOG4 log_alfabeam: ALFABEAM 3 9.722407122188985 21.825985569364455 2009-Apr-21 19:01:02 LOG4 log_alfabeam: ALFABEAM 4 9.723895501057385 21.917215858941276 2009-Apr-21 19:01:02 LOG4 log_alfabeam: ALFABEAM 5 9.718129483664134 21.974307596619102 2009-Apr-21 19:01:02 LOG4 log_alfabeam: ALFABEAM 6 9.710908238102805 21.940031734059282 2009-Apr-21 19:01:02 INFO2 take_data: Starting WAPP+GALFA scan: 911100210 2009-Apr-21 19:01:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:01:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:01:03 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-21 19:01:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:01:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Apr-21 19:01:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:01:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:01:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.140 (still bad) 2009-Apr-21 19:01:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82864.00 2009-Apr-21 19:01:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:01:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:01:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:01:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:01:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:01:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:01:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:01:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:01:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.129 (still bad) 2009-Apr-21 19:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-21 19:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-21 19:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-21 19:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 19:01:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:01:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:01:14 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-21 19:01:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:01:14 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-21 19:01:14 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2009-Apr-21 19:01:14 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2009-Apr-21 19:01:14 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2009-Apr-21 19:01:14 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:01:14 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30607 J 2009-Apr-21 19:01:14 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:01:14 LOG2 antvel: Parameters to Doppler: Topocentric 82874 2009 111 0.0 2009-Apr-21 19:01:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:01:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2009-Apr-21 19:01:14 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2009-Apr-21 19:01:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:01:14 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:01:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Apr-21 19:01:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:01:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Apr-21 19:01:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:01:14 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-21 19:01:14 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.579968 2009.3060712474967 18.999933 2009-Apr-21 19:01:14 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2009-Apr-21 19:01:14 LOG4 log_alfabeam: ALFABEAM 1 9.709439386790480 21.849512826954953 2009-Apr-21 19:01:14 LOG4 log_alfabeam: ALFABEAM 2 9.715175477902603 21.792619430182135 2009-Apr-21 19:01:14 LOG4 log_alfabeam: ALFABEAM 3 9.722410228416795 21.826045355993102 2009-Apr-21 19:01:14 LOG4 log_alfabeam: ALFABEAM 4 9.723893646959496 21.917292545211723 2009-Apr-21 19:01:14 LOG4 log_alfabeam: ALFABEAM 5 9.718124466235876 21.974323435774409 2009-Apr-21 19:01:14 LOG4 log_alfabeam: ALFABEAM 6 9.710905127945221 21.939969976109168 2009-Apr-21 19:01:14 INFO2 take_data: Starting WAPP+GALFA scan: 911100211 2009-Apr-21 19:01:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:01:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:01:15 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-21 19:01:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:01:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Apr-21 19:01:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:01:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:01:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:01:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82876.00 2009-Apr-21 19:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 19:01:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:01:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:01:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:01:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:01:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:01:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:01:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:01:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:01:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-21 19:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-21 19:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-21 19:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-21 19:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-21 19:01:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:01:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:01:26 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-21 19:01:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:01:26 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-21 19:01:26 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2009-Apr-21 19:01:26 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2009-Apr-21 19:01:26 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2009-Apr-21 19:01:26 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:01:26 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30607 J 2009-Apr-21 19:01:26 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:01:26 LOG2 antvel: Parameters to Doppler: Topocentric 82886 2009 111 0.0 2009-Apr-21 19:01:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:01:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2009-Apr-21 19:01:26 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2009-Apr-21 19:01:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:01:26 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:01:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Apr-21 19:01:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:01:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Apr-21 19:01:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:01:26 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-21 19:01:26 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.583310 2009.3060716277537 18.999933 2009-Apr-21 19:01:26 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333340 2009-Apr-21 19:01:26 LOG4 log_alfabeam: ALFABEAM 1 9.709441237072504 21.849436461342574 2009-Apr-21 19:01:26 LOG4 log_alfabeam: ALFABEAM 2 9.715180391376530 21.792604048362932 2009-Apr-21 19:01:26 LOG4 log_alfabeam: ALFABEAM 3 9.722413344138610 21.826105419862138 2009-Apr-21 19:01:26 LOG4 log_alfabeam: ALFABEAM 4 9.723891781023204 21.917369526536682 2009-Apr-21 19:01:26 LOG4 log_alfabeam: ALFABEAM 5 9.718119427286579 21.974339286358983 2009-Apr-21 19:01:26 LOG4 log_alfabeam: ALFABEAM 6 9.710902008455980 21.939907930761361 2009-Apr-21 19:01:26 INFO2 take_data: Starting WAPP+GALFA scan: 911100212 2009-Apr-21 19:01:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:01:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:01:27 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-21 19:01:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:01:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Apr-21 19:01:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:01:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:01:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:01:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82888.00 2009-Apr-21 19:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 19:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.090 (still bad) 2009-Apr-21 19:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-21 19:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.090 (still bad) 2009-Apr-21 19:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.091 (still bad) 2009-Apr-21 19:01:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:01:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:01:38 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-21 19:01:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:01:38 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-21 19:01:38 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2009-Apr-21 19:01:38 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2009-Apr-21 19:01:38 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2009-Apr-21 19:01:38 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:01:38 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30607 J 2009-Apr-21 19:01:38 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:01:38 LOG2 antvel: Parameters to Doppler: Topocentric 82898 2009 111 0.0 2009-Apr-21 19:01:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:01:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2009-Apr-21 19:01:38 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2009-Apr-21 19:01:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:01:38 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:01:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Apr-21 19:01:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:01:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Apr-21 19:01:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:01:38 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-21 19:01:38 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.586653 2009.3060720080107 18.999933 2009-Apr-21 19:01:38 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 21.883333333333347 2009-Apr-21 19:01:38 LOG4 log_alfabeam: ALFABEAM 1 9.709443100274735 21.849359755276570 2009-Apr-21 19:01:38 LOG4 log_alfabeam: ALFABEAM 2 9.715185328819640 21.792588646271806 2009-Apr-21 19:01:38 LOG4 log_alfabeam: ALFABEAM 3 9.722416471288405 21.826165799507017 2009-Apr-21 19:01:38 LOG4 log_alfabeam: ALFABEAM 4 9.723889902008668 21.917446851494123 2009-Apr-21 19:01:38 LOG4 log_alfabeam: ALFABEAM 5 9.718114363607292 21.974355157715429 2009-Apr-21 19:01:38 LOG4 log_alfabeam: ALFABEAM 6 9.710898877701627 21.939845558207967 2009-Apr-21 19:01:38 INFO2 take_data: Starting WAPP+GALFA scan: 911100213 2009-Apr-21 19:01:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:01:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:01:39 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-21 19:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-21 19:01:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:01:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Apr-21 19:01:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:01:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:01:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:01:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82900.00 2009-Apr-21 19:01:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:01:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:01:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:01:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:01:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:01:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:01:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:01:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-21 19:01:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-21 19:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-21 19:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-21 19:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-21 19:01:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:01:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:01:50 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-21 19:01:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:01:50 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-21 19:01:50 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2009-Apr-21 19:01:50 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2009-Apr-21 19:01:50 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2009-Apr-21 19:01:50 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:01:50 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30607 J 2009-Apr-21 19:01:50 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:01:50 LOG2 antvel: Parameters to Doppler: Topocentric 82910 2009 111 0.0 2009-Apr-21 19:01:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:01:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2009-Apr-21 19:01:50 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2009-Apr-21 19:01:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:01:50 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:01:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Apr-21 19:01:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:01:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Apr-21 19:01:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:01:50 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-21 19:01:50 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.589995 2009.3060723882679 18.999933 2009-Apr-21 19:01:50 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333322 2009-Apr-21 19:01:50 LOG4 log_alfabeam: ALFABEAM 1 9.709444975405493 21.849282752135338 2009-Apr-21 19:01:50 LOG4 log_alfabeam: ALFABEAM 2 9.715190287467324 21.792573233256437 2009-Apr-21 19:01:50 LOG4 log_alfabeam: ALFABEAM 3 9.722419608065197 21.826226461423968 2009-Apr-21 19:01:50 LOG4 log_alfabeam: ALFABEAM 4 9.723888010915333 21.917524476356370 2009-Apr-21 19:01:50 LOG4 log_alfabeam: ALFABEAM 5 9.718109278032017 21.974371040200317 2009-Apr-21 19:01:50 LOG4 log_alfabeam: ALFABEAM 6 9.710895737488148 21.939782893057597 2009-Apr-21 19:01:50 INFO2 take_data: Starting WAPP+GALFA scan: 911100214 2009-Apr-21 19:01:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:01:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:01:51 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-21 19:01:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:01:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Apr-21 19:01:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:01:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:01:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 19:01:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82912.00 2009-Apr-21 19:01:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:01:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:01:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:01:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:01:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:01:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:01:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:01:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:01:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 19:01:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-21 19:01:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.935 0.975 0.972 0.963 2009-Apr-21 19:01:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.079 0.954 0.974 2009-Apr-21 19:01:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.985 1.039 0.947 1.019 2009-Apr-21 19:01:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.997 0.104 1.099 0.129 2009-Apr-21 19:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 19:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-21 19:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 19:02:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:02:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:02:02 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-21 19:02:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:02:02 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-21 19:02:02 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2009-Apr-21 19:02:02 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2009-Apr-21 19:02:02 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2009-Apr-21 19:02:02 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:02:02 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30607 J 2009-Apr-21 19:02:02 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:02:02 LOG2 antvel: Parameters to Doppler: Topocentric 82922 2009 111 0.0 2009-Apr-21 19:02:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:02:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2009-Apr-21 19:02:02 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2009-Apr-21 19:02:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:02:02 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:02:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Apr-21 19:02:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:02:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Apr-21 19:02:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:02:02 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-21 19:02:02 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.593338 2009.3060727685249 18.999933 2009-Apr-21 19:02:02 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2009-Apr-21 19:02:02 LOG4 log_alfabeam: ALFABEAM 1 9.709446863711575 21.849205403298253 2009-Apr-21 19:02:02 LOG4 log_alfabeam: ALFABEAM 2 9.715195270478500 21.792557800231144 2009-Apr-21 19:02:02 LOG4 log_alfabeam: ALFABEAM 3 9.722422756416602 21.826287444566102 2009-Apr-21 19:02:02 LOG4 log_alfabeam: ALFABEAM 4 9.723886106485105 21.917602450137409 2009-Apr-21 19:02:02 LOG4 log_alfabeam: ALFABEAM 5 9.718104167319668 21.974386943165033 2009-Apr-21 19:02:02 LOG4 log_alfabeam: ALFABEAM 6 9.710892585868727 21.939719895069995 2009-Apr-21 19:02:02 INFO2 take_data: Starting WAPP+GALFA scan: 911100215 2009-Apr-21 19:02:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:02:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:02:03 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-21 19:02:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:02:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Apr-21 19:02:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:02:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:02:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:02:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82924.00 2009-Apr-21 19:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 19:02:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:02:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:02:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:02:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:02:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:02:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:02:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:02:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:02:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 19:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 19:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 19:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-21 19:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-21 19:02:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:02:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:02:14 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-21 19:02:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:02:14 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-21 19:02:14 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Apr-21 19:02:14 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-21 19:02:14 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-21 19:02:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-21 19:02:14 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-21 19:02:14 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-21 19:02:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-21 19:02:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-21 19:02:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-21 19:02:14 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-21 19:02:14 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2009-Apr-21 19:02:14 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2009-Apr-21 19:02:14 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-Apr-21 19:02:14 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:02:14 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30607 J 2009-Apr-21 19:02:14 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:02:14 LOG2 antvel: Parameters to Doppler: Topocentric 82934 2009 111 0.0 2009-Apr-21 19:02:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:02:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-Apr-21 19:02:14 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-Apr-21 19:02:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:02:14 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:02:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Apr-21 19:02:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:02:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Apr-21 19:02:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:02:14 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-21 19:02:14 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.596680 2009.3060731487819 18.999933 2009-Apr-21 19:02:14 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333329 2009-Apr-21 19:02:14 LOG4 log_alfabeam: ALFABEAM 1 9.709448764189464 21.849127752477116 2009-Apr-21 19:02:14 LOG4 log_alfabeam: ALFABEAM 2 9.715200275065445 21.792542356571893 2009-Apr-21 19:02:14 LOG4 log_alfabeam: ALFABEAM 3 9.722425914530008 21.826348715129086 2009-Apr-21 19:02:14 LOG4 log_alfabeam: ALFABEAM 4 9.723884189729377 21.917680728772925 2009-Apr-21 19:02:14 LOG4 log_alfabeam: ALFABEAM 5 9.718099034328073 21.974402856936777 2009-Apr-21 19:02:14 LOG4 log_alfabeam: ALFABEAM 6 9.710889424660852 21.939656599165669 2009-Apr-21 19:02:14 INFO2 take_data: Starting WAPP+GALFA scan: 911100216 2009-Apr-21 19:02:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:02:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:02:15 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-21 19:02:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:02:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Apr-21 19:02:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:02:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:02:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:02:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82936.00 2009-Apr-21 19:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-21 19:02:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:02:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:02:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:02:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:02:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:02:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:02:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:02:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:02:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.559 (still bad) 2009-Apr-21 19:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.566 (still bad) 2009-Apr-21 19:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.559 (still bad) 2009-Apr-21 19:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.563 (still bad) 2009-Apr-21 19:02:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.570 (still bad) 2009-Apr-21 19:02:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:02:26 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-21 19:02:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:02:26 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-21 19:02:26 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2009-Apr-21 19:02:26 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2009-Apr-21 19:02:26 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2009-Apr-21 19:02:26 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:02:26 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30607 J 2009-Apr-21 19:02:26 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:02:26 LOG2 antvel: Parameters to Doppler: Topocentric 82946 2009 111 0.0 2009-Apr-21 19:02:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:02:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2009-Apr-21 19:02:26 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2009-Apr-21 19:02:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:02:26 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:02:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Apr-21 19:02:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:02:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Apr-21 19:02:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:02:26 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-21 19:02:26 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.600023 2009.3060735290389 18.999933 2009-Apr-21 19:02:26 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333340 2009-Apr-21 19:02:26 LOG4 log_alfabeam: ALFABEAM 1 9.709450678104387 21.849049750611854 2009-Apr-21 19:02:26 LOG4 log_alfabeam: ALFABEAM 2 9.715205304418799 21.792526893184586 2009-Apr-21 19:02:26 LOG4 log_alfabeam: ALFABEAM 3 9.722429084366883 21.826410312491699 2009-Apr-21 19:02:26 LOG4 log_alfabeam: ALFABEAM 4 9.723882259371418 21.917759361720247 2009-Apr-21 19:02:26 LOG4 log_alfabeam: ALFABEAM 5 9.718093875783419 21.974418790874875 2009-Apr-21 19:02:26 LOG4 log_alfabeam: ALFABEAM 6 9.710886251904185 21.939592964663536 2009-Apr-21 19:02:26 INFO2 take_data: Starting WAPP+GALFA scan: 911100217 2009-Apr-21 19:02:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:02:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:02:27 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-21 19:02:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:02:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Apr-21 19:02:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:02:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:02:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:02:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82948.00 2009-Apr-21 19:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.570 (still bad) 2009-Apr-21 19:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.506 (still bad) 2009-Apr-21 19:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.511 (still bad) 2009-Apr-21 19:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.507 (still bad) 2009-Apr-21 19:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.509 (still bad) 2009-Apr-21 19:02:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:02:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:02:38 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-21 19:02:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:02:38 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-21 19:02:38 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2009-Apr-21 19:02:38 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2009-Apr-21 19:02:38 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2009-Apr-21 19:02:38 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:02:38 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30607 J 2009-Apr-21 19:02:38 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:02:38 LOG2 antvel: Parameters to Doppler: Topocentric 82958 2009 111 0.0 2009-Apr-21 19:02:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:02:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2009-Apr-21 19:02:38 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2009-Apr-21 19:02:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:02:38 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:02:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Apr-21 19:02:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:02:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Apr-21 19:02:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:02:38 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-21 19:02:38 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.603365 2009.3060739092959 18.999933 2009-Apr-21 19:02:38 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333319 2009-Apr-21 19:02:38 LOG4 log_alfabeam: ALFABEAM 1 9.709452604440793 21.848971441752560 2009-Apr-21 19:02:38 LOG4 log_alfabeam: ALFABEAM 2 9.715210355727383 21.792511419473602 2009-Apr-21 19:02:38 LOG4 log_alfabeam: ALFABEAM 3 9.722432264102833 21.826472202544430 2009-Apr-21 19:02:38 LOG4 log_alfabeam: ALFABEAM 4 9.723880316434785 21.917838304573451 2009-Apr-21 19:02:38 LOG4 log_alfabeam: ALFABEAM 5 9.718088694567731 21.974434735276933 2009-Apr-21 19:02:38 LOG4 log_alfabeam: ALFABEAM 6 9.710883069427878 21.939529026800816 2009-Apr-21 19:02:38 INFO2 take_data: Starting WAPP+GALFA scan: 911100218 2009-Apr-21 19:02:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:02:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:02:39 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-21 19:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.513 (still bad) 2009-Apr-21 19:02:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:02:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Apr-21 19:02:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:02:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:02:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:02:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82960.00 2009-Apr-21 19:02:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:02:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:02:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:02:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:02:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:02:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:02:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:02:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.504 (still bad) 2009-Apr-21 19:02:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.509 (still bad) 2009-Apr-21 19:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.503 (still bad) 2009-Apr-21 19:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.505 (still bad) 2009-Apr-21 19:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.514 (still bad) 2009-Apr-21 19:02:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:02:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:02:50 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-21 19:02:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:02:50 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-21 19:02:50 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2009-Apr-21 19:02:50 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2009-Apr-21 19:02:50 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2009-Apr-21 19:02:50 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:02:50 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30607 J 2009-Apr-21 19:02:50 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:02:50 LOG2 antvel: Parameters to Doppler: Topocentric 82970 2009 111 0.0 2009-Apr-21 19:02:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:02:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2009-Apr-21 19:02:50 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2009-Apr-21 19:02:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:02:50 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:02:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Apr-21 19:02:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:02:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Apr-21 19:02:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:02:50 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-21 19:02:50 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.606708 2009.3060742895532 18.999933 2009-Apr-21 19:02:50 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333329 2009-Apr-21 19:02:50 LOG4 log_alfabeam: ALFABEAM 1 9.709454544482730 21.848892776392375 2009-Apr-21 19:02:50 LOG4 log_alfabeam: ALFABEAM 2 9.715215432214144 21.792495926337352 2009-Apr-21 19:02:50 LOG4 log_alfabeam: ALFABEAM 3 9.722435455713349 21.826534425099986 2009-Apr-21 19:02:50 LOG4 log_alfabeam: ALFABEAM 4 9.723878359623681 21.917917607240806 2009-Apr-21 19:02:50 LOG4 log_alfabeam: ALFABEAM 5 9.718083487373873 21.974450699509344 2009-Apr-21 19:02:50 LOG4 log_alfabeam: ALFABEAM 6 9.710879875257875 21.939464744447296 2009-Apr-21 19:02:50 INFO2 take_data: Starting WAPP+GALFA scan: 911100219 2009-Apr-21 19:02:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:02:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:02:51 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-21 19:02:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:02:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Apr-21 19:02:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:02:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:02:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.508 (still bad) 2009-Apr-21 19:02:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82972.00 2009-Apr-21 19:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:02:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.501 (still bad) 2009-Apr-21 19:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.504 (still bad) 2009-Apr-21 19:02:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-21 19:02:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.263 1.298 1.283 1.271 2009-Apr-21 19:02:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.473 1.467 1.288 1.303 2009-Apr-21 19:02:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.332 1.403 1.291 1.338 2009-Apr-21 19:02:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.363 0.104 1.502 0.129 2009-Apr-21 19:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.503 (still bad) 2009-Apr-21 19:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.512 (still bad) 2009-Apr-21 19:03:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:03:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:03:02 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-21 19:03:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:03:02 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-21 19:03:02 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2009-Apr-21 19:03:02 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2009-Apr-21 19:03:02 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2009-Apr-21 19:03:02 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:03:02 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30607 J 2009-Apr-21 19:03:02 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:03:02 LOG2 antvel: Parameters to Doppler: Topocentric 82982 2009 111 0.0 2009-Apr-21 19:03:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:03:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2009-Apr-21 19:03:02 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2009-Apr-21 19:03:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:03:02 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:03:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Apr-21 19:03:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:03:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Apr-21 19:03:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:03:02 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-21 19:03:02 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.610050 2009.3060746698102 18.999933 2009-Apr-21 19:03:02 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333347 2009-Apr-21 19:03:02 LOG4 log_alfabeam: ALFABEAM 1 9.709456497202416 21.848813798924596 2009-Apr-21 19:03:02 LOG4 log_alfabeam: ALFABEAM 2 9.715220531044098 21.792480423208737 2009-Apr-21 19:03:02 LOG4 log_alfabeam: ALFABEAM 3 9.722438657362090 21.826596945738867 2009-Apr-21 19:03:02 LOG4 log_alfabeam: ALFABEAM 4 9.723876389974041 21.917997224969785 2009-Apr-21 19:03:02 LOG4 log_alfabeam: ALFABEAM 5 9.718078257108424 21.974466673840059 2009-Apr-21 19:03:02 LOG4 log_alfabeam: ALFABEAM 6 9.710876671235166 21.939400153161806 2009-Apr-21 19:03:02 INFO2 take_data: Starting WAPP+GALFA scan: 911100220 2009-Apr-21 19:03:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:03:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:03:03 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-21 19:03:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:03:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Apr-21 19:03:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:03:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:03:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.505 (still bad) 2009-Apr-21 19:03:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82984.00 2009-Apr-21 19:03:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:03:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:03:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:03:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:03:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:03:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:03:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:03:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:03:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.512 (still bad) 2009-Apr-21 19:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.514 (still bad) 2009-Apr-21 19:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.511 (still bad) 2009-Apr-21 19:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.511 (still bad) 2009-Apr-21 19:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.520 (still bad) 2009-Apr-21 19:03:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:03:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:03:14 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-21 19:03:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:03:14 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-21 19:03:14 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2009-Apr-21 19:03:14 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2009-Apr-21 19:03:14 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2009-Apr-21 19:03:14 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:03:14 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30608 J 2009-Apr-21 19:03:14 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:03:14 LOG2 antvel: Parameters to Doppler: Topocentric 82994 2009 111 0.0 2009-Apr-21 19:03:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:03:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2009-Apr-21 19:03:14 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2009-Apr-21 19:03:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:03:14 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:03:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Apr-21 19:03:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:03:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Apr-21 19:03:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:03:14 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-21 19:03:14 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.613392 2009.3060750500672 18.999933 2009-Apr-21 19:03:14 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2009-Apr-21 19:03:14 LOG4 log_alfabeam: ALFABEAM 1 9.709458463312826 21.848734483171793 2009-Apr-21 19:03:14 LOG4 log_alfabeam: ALFABEAM 2 9.715225653936571 21.792464905624854 2009-Apr-21 19:03:14 LOG4 log_alfabeam: ALFABEAM 3 9.722441870075803 21.826659785864816 2009-Apr-21 19:03:14 LOG4 log_alfabeam: ALFABEAM 4 9.723874406766054 21.918077184150327 2009-Apr-21 19:03:14 LOG4 log_alfabeam: ALFABEAM 5 9.718073002006498 21.974482662855127 2009-Apr-21 19:03:14 LOG4 log_alfabeam: ALFABEAM 6 9.710873456335420 21.939335230832196 2009-Apr-21 19:03:14 INFO2 take_data: Starting WAPP+GALFA scan: 911100221 2009-Apr-21 19:03:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:03:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:03:15 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-21 19:03:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:03:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Apr-21 19:03:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:03:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:03:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:03:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82996.00 2009-Apr-21 19:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.514 (still bad) 2009-Apr-21 19:03:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:03:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:03:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:03:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:03:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:03:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:03:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:03:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:03:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.514 (still bad) 2009-Apr-21 19:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.517 (still bad) 2009-Apr-21 19:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.515 (still bad) 2009-Apr-21 19:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.516 (still bad) 2009-Apr-21 19:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.524 (still bad) 2009-Apr-21 19:03:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:03:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:03:26 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-21 19:03:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:03:26 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-21 19:03:26 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2009-Apr-21 19:03:26 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2009-Apr-21 19:03:26 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2009-Apr-21 19:03:26 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:03:26 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30608 J 2009-Apr-21 19:03:26 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:03:26 LOG2 antvel: Parameters to Doppler: Topocentric 83006 2009 111 0.0 2009-Apr-21 19:03:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:03:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2009-Apr-21 19:03:26 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2009-Apr-21 19:03:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:03:26 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:03:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Apr-21 19:03:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:03:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Apr-21 19:03:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:03:26 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-21 19:03:26 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.616735 2009.3060754303242 18.999933 2009-Apr-21 19:03:26 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333322 2009-Apr-21 19:03:26 LOG4 log_alfabeam: ALFABEAM 1 9.709460443544694 21.848654802523825 2009-Apr-21 19:03:26 LOG4 log_alfabeam: ALFABEAM 2 9.715230802641932 21.792449369111193 2009-Apr-21 19:03:26 LOG4 log_alfabeam: ALFABEAM 3 9.722445094894974 21.826722967297240 2009-Apr-21 19:03:26 LOG4 log_alfabeam: ALFABEAM 4 9.723872409261839 21.918157511608936 2009-Apr-21 19:03:26 LOG4 log_alfabeam: ALFABEAM 5 9.718067720271073 21.974498671152020 2009-Apr-21 19:03:26 LOG4 log_alfabeam: ALFABEAM 6 9.710870229520770 21.939269954915972 2009-Apr-21 19:03:26 INFO2 take_data: Starting WAPP+GALFA scan: 911100222 2009-Apr-21 19:03:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:03:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:03:27 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-21 19:03:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:03:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Apr-21 19:03:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:03:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:03:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:03:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83008.00 2009-Apr-21 19:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.518 (still bad) 2009-Apr-21 19:03:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:03:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:03:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:03:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:03:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:03:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:03:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:03:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:03:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.524 (still bad) 2009-Apr-21 19:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.528 (still bad) 2009-Apr-21 19:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.524 (still bad) 2009-Apr-21 19:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.526 (still bad) 2009-Apr-21 19:03:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:03:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:03:38 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-21 19:03:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:03:38 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-21 19:03:38 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Apr-21 19:03:38 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-21 19:03:38 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-21 19:03:38 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-21 19:03:38 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-21 19:03:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-21 19:03:38 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-21 19:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.538 (still bad) 2009-Apr-21 19:03:38 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-21 19:03:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-21 19:03:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-21 19:03:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-21 19:03:38 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-21 19:03:38 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-21 19:03:38 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2009-Apr-21 19:03:38 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2009-Apr-21 19:03:38 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-Apr-21 19:03:38 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:03:38 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30608 J 2009-Apr-21 19:03:38 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:03:38 LOG2 antvel: Parameters to Doppler: Topocentric 83018 2009 111 0.0 2009-Apr-21 19:03:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:03:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-Apr-21 19:03:38 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-Apr-21 19:03:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:03:38 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:03:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Apr-21 19:03:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:03:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Apr-21 19:03:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:03:38 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-21 19:03:38 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.620077 2009.3060758105812 18.999933 2009-Apr-21 19:03:38 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 21.883333333333347 2009-Apr-21 19:03:38 LOG4 log_alfabeam: ALFABEAM 1 9.709462436851503 21.848574801898494 2009-Apr-21 19:03:38 LOG4 log_alfabeam: ALFABEAM 2 9.715235974288824 21.792433823143671 2009-Apr-21 19:03:38 LOG4 log_alfabeam: ALFABEAM 3 9.722448329965083 21.826786455142493 2009-Apr-21 19:03:38 LOG4 log_alfabeam: ALFABEAM 4 9.723870398516317 21.918238162063599 2009-Apr-21 19:03:38 LOG4 log_alfabeam: ALFABEAM 5 9.718062414846321 21.974514688954045 2009-Apr-21 19:03:38 LOG4 log_alfabeam: ALFABEAM 6 9.710866992650232 21.939204361463982 2009-Apr-21 19:03:38 INFO2 take_data: Starting WAPP+GALFA scan: 911100223 2009-Apr-21 19:03:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:03:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:03:39 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-21 19:03:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:03:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Apr-21 19:03:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:03:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:03:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:03:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83020.00 2009-Apr-21 19:03:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:03:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:03:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:03:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:03:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:03:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:03:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:03:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:03:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.529 (still bad) 2009-Apr-21 19:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-21 19:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-21 19:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-21 19:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-21 19:03:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:03:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:03:50 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-21 19:03:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:03:50 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-21 19:03:50 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2009-Apr-21 19:03:50 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2009-Apr-21 19:03:50 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2009-Apr-21 19:03:50 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:03:50 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30608 J 2009-Apr-21 19:03:50 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:03:50 LOG2 antvel: Parameters to Doppler: Topocentric 83030 2009 111 0.0 2009-Apr-21 19:03:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:03:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2009-Apr-21 19:03:50 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2009-Apr-21 19:03:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:03:50 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:03:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Apr-21 19:03:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:03:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Apr-21 19:03:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:03:50 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-21 19:03:50 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.623420 2009.3060761908384 18.999933 2009-Apr-21 19:03:50 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 21.883333333333340 2009-Apr-21 19:03:50 LOG4 log_alfabeam: ALFABEAM 1 9.709464444566226 21.848494430637977 2009-Apr-21 19:03:50 LOG4 log_alfabeam: ALFABEAM 2 9.715241172183555 21.792418258605792 2009-Apr-21 19:03:50 LOG4 log_alfabeam: ALFABEAM 3 9.722451577297500 21.826850290335429 2009-Apr-21 19:03:50 LOG4 log_alfabeam: ALFABEAM 4 9.723868373184136 21.918319186583830 2009-Apr-21 19:03:50 LOG4 log_alfabeam: ALFABEAM 5 9.718057082339042 21.974530725640886 2009-Apr-21 19:03:50 LOG4 log_alfabeam: ALFABEAM 6 9.710863743714704 21.939138408184405 2009-Apr-21 19:03:50 INFO2 take_data: Starting WAPP+GALFA scan: 911100224 2009-Apr-21 19:03:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:03:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:03:51 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-21 19:03:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:03:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Apr-21 19:03:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:03:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:03:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:03:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83032.00 2009-Apr-21 19:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-21 19:03:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:03:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:03:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:03:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:03:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:03:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:03:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:03:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:03:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-21 19:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.088 (still bad) 2009-Apr-21 19:03:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-21 19:03:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.925 0.971 0.967 0.962 2009-Apr-21 19:03:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 1.081 0.948 0.964 2009-Apr-21 19:03:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.969 1.019 0.943 1.015 2009-Apr-21 19:03:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.984 0.104 1.085 0.128 2009-Apr-21 19:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-21 19:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-21 19:04:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:04:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:04:02 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-21 19:04:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:04:02 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-21 19:04:02 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2009-Apr-21 19:04:02 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2009-Apr-21 19:04:02 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2009-Apr-21 19:04:02 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:04:02 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30608 J 2009-Apr-21 19:04:02 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:04:02 LOG2 antvel: Parameters to Doppler: Topocentric 83042 2009 111 0.0 2009-Apr-21 19:04:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:04:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2009-Apr-21 19:04:02 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2009-Apr-21 19:04:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:04:02 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:04:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Apr-21 19:04:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:04:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Apr-21 19:04:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:04:02 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-21 19:04:02 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.626762 2009.3060765710954 18.999933 2009-Apr-21 19:04:02 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666660 21.883333333333351 2009-Apr-21 19:04:02 LOG4 log_alfabeam: ALFABEAM 1 9.709466465629575 21.848413734016091 2009-Apr-21 19:04:02 LOG4 log_alfabeam: ALFABEAM 2 9.715246393430034 21.792402685002287 2009-Apr-21 19:04:02 LOG4 log_alfabeam: ALFABEAM 3 9.722454835025360 21.826914437659998 2009-Apr-21 19:04:02 LOG4 log_alfabeam: ALFABEAM 4 9.723866334333119 21.918400539528058 2009-Apr-21 19:04:02 LOG4 log_alfabeam: ALFABEAM 5 9.718051725718922 21.974546771405862 2009-Apr-21 19:04:02 LOG4 log_alfabeam: ALFABEAM 6 9.710860484585412 21.939072131462542 2009-Apr-21 19:04:02 INFO2 take_data: Starting WAPP+GALFA scan: 911100225 2009-Apr-21 19:04:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:04:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:04:03 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-21 19:04:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:04:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Apr-21 19:04:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:04:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:04:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:04:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83044.00 2009-Apr-21 19:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-21 19:04:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:04:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:04:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:04:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:04:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:04:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:04:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:04:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:04:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.083 (still bad) 2009-Apr-21 19:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-21 19:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.083 (still bad) 2009-Apr-21 19:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-21 19:04:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:04:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:04:14 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-21 19:04:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:04:14 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-21 19:04:14 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2009-Apr-21 19:04:14 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2009-Apr-21 19:04:14 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2009-Apr-21 19:04:14 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:04:14 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30608 J 2009-Apr-21 19:04:14 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:04:14 LOG2 antvel: Parameters to Doppler: Topocentric 83054 2009 111 0.0 2009-Apr-21 19:04:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:04:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2009-Apr-21 19:04:14 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2009-Apr-21 19:04:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:04:14 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:04:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Apr-21 19:04:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:04:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Apr-21 19:04:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:04:14 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-21 19:04:14 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.630105 2009.3060769513525 18.999933 2009-Apr-21 19:04:14 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2009-Apr-21 19:04:14 LOG4 log_alfabeam: ALFABEAM 1 9.709468501394847 21.848332660900766 2009-Apr-21 19:04:14 LOG4 log_alfabeam: ALFABEAM 2 9.715251641369020 21.792387093212472 2009-Apr-21 19:04:14 LOG4 log_alfabeam: ALFABEAM 3 9.722458105174727 21.826978938515452 2009-Apr-21 19:04:14 LOG4 log_alfabeam: ALFABEAM 4 9.723864280597310 21.918482272444397 2009-Apr-21 19:04:14 LOG4 log_alfabeam: ALFABEAM 5 9.718046341557201 21.974562835632209 2009-Apr-21 19:04:14 LOG4 log_alfabeam: ALFABEAM 6 9.710857213238924 21.939005488525922 2009-Apr-21 19:04:14 INFO2 take_data: Starting WAPP+GALFA scan: 911100226 2009-Apr-21 19:04:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:04:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:04:15 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-21 19:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.091 (still bad) 2009-Apr-21 19:04:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:04:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Apr-21 19:04:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:04:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:04:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:04:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83056.00 2009-Apr-21 19:04:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:04:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:04:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:04:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:04:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:04:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:04:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:04:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.083 (still bad) 2009-Apr-21 19:04:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.082 (still bad) 2009-Apr-21 19:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.079 (still bad) 2009-Apr-21 19:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.080 (still bad) 2009-Apr-21 19:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.091 (still bad) 2009-Apr-21 19:04:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:04:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:04:26 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-21 19:04:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:04:26 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-21 19:04:26 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2009-Apr-21 19:04:26 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2009-Apr-21 19:04:26 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2009-Apr-21 19:04:26 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:04:26 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30608 J 2009-Apr-21 19:04:26 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:04:26 LOG2 antvel: Parameters to Doppler: Topocentric 83066 2009 111 0.0 2009-Apr-21 19:04:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:04:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2009-Apr-21 19:04:26 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2009-Apr-21 19:04:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:04:26 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:04:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Apr-21 19:04:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:04:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Apr-21 19:04:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:04:26 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-21 19:04:26 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.633447 2009.3060773316095 18.999933 2009-Apr-21 19:04:26 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666672 21.883333333333340 2009-Apr-21 19:04:26 LOG4 log_alfabeam: ALFABEAM 1 9.709470550789780 21.848251256927174 2009-Apr-21 19:04:26 LOG4 log_alfabeam: ALFABEAM 2 9.715256913079306 21.792371492769920 2009-Apr-21 19:04:26 LOG4 log_alfabeam: ALFABEAM 3 9.722461385866209 21.827043757358283 2009-Apr-21 19:04:26 LOG4 log_alfabeam: ALFABEAM 4 9.723862213057670 21.918564339326320 2009-Apr-21 19:04:26 LOG4 log_alfabeam: ALFABEAM 5 9.718040932849492 21.974578908483156 2009-Apr-21 19:04:26 LOG4 log_alfabeam: ALFABEAM 6 9.710853931558841 21.938938516099700 2009-Apr-21 19:04:26 INFO2 take_data: Starting WAPP+GALFA scan: 911100227 2009-Apr-21 19:04:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:04:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:04:27 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-21 19:04:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:04:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Apr-21 19:04:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:04:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:04:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.082 (still bad) 2009-Apr-21 19:04:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83068.00 2009-Apr-21 19:04:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:04:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:04:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:04:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:04:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:04:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:04:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:04:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:04:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-21 19:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.089 (still bad) 2009-Apr-21 19:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-21 19:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-21 19:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-21 19:04:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:04:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:04:38 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-21 19:04:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:04:38 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-21 19:04:38 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2009-Apr-21 19:04:38 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2009-Apr-21 19:04:38 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2009-Apr-21 19:04:38 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:04:38 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30608 J 2009-Apr-21 19:04:38 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:04:38 LOG2 antvel: Parameters to Doppler: Topocentric 83078 2009 111 0.0 2009-Apr-21 19:04:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:04:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2009-Apr-21 19:04:38 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2009-Apr-21 19:04:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:04:38 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:04:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Apr-21 19:04:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:04:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Apr-21 19:04:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:04:38 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-21 19:04:38 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.636790 2009.3060777118665 18.999933 2009-Apr-21 19:04:38 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666670 21.883333333333322 2009-Apr-21 19:04:38 LOG4 log_alfabeam: ALFABEAM 1 9.709472615188476 21.848169470480663 2009-Apr-21 19:04:38 LOG4 log_alfabeam: ALFABEAM 2 9.715262211936727 21.792355874550836 2009-Apr-21 19:04:38 LOG4 log_alfabeam: ALFABEAM 3 9.722464679140765 21.827108936061379 2009-Apr-21 19:04:38 LOG4 log_alfabeam: ALFABEAM 4 9.723860130327154 21.918646792208829 2009-Apr-21 19:04:38 LOG4 log_alfabeam: ALFABEAM 5 9.718035496130799 21.974594999344266 2009-Apr-21 19:04:38 LOG4 log_alfabeam: ALFABEAM 6 9.710850637507194 21.938871170921132 2009-Apr-21 19:04:38 INFO2 take_data: Starting WAPP+GALFA scan: 911100228 2009-Apr-21 19:04:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:04:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:04:39 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-21 19:04:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:04:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Apr-21 19:04:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:04:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:04:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.089 (still bad) 2009-Apr-21 19:04:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83080.00 2009-Apr-21 19:04:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:04:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:04:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:04:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:04:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:04:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:04:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:04:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:04:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.089 (still bad) 2009-Apr-21 19:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.091 (still bad) 2009-Apr-21 19:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.089 (still bad) 2009-Apr-21 19:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.089 (still bad) 2009-Apr-21 19:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-21 19:04:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:04:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:04:50 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-21 19:04:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:04:50 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-21 19:04:50 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2009-Apr-21 19:04:50 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2009-Apr-21 19:04:50 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2009-Apr-21 19:04:50 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:04:50 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30608 J 2009-Apr-21 19:04:50 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:04:50 LOG2 antvel: Parameters to Doppler: Topocentric 83090 2009 111 0.0 2009-Apr-21 19:04:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:04:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2009-Apr-21 19:04:50 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2009-Apr-21 19:04:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:04:50 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:04:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Apr-21 19:04:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:04:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Apr-21 19:04:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:04:50 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-21 19:04:50 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.640132 2009.3060780921237 18.999933 2009-Apr-21 19:04:50 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2009-Apr-21 19:04:50 LOG4 log_alfabeam: ALFABEAM 1 9.709474693505458 21.848087347563283 2009-Apr-21 19:04:50 LOG4 log_alfabeam: ALFABEAM 2 9.715267534994590 21.792340248117821 2009-Apr-21 19:04:50 LOG4 log_alfabeam: ALFABEAM 3 9.722467983106329 21.827174438748493 2009-Apr-21 19:04:50 LOG4 log_alfabeam: ALFABEAM 4 9.723858033500097 21.918729584715084 2009-Apr-21 19:04:50 LOG4 log_alfabeam: ALFABEAM 5 9.718030034423069 21.974611098348699 2009-Apr-21 19:04:50 LOG4 log_alfabeam: ALFABEAM 6 9.710847332980157 21.938803490060657 2009-Apr-21 19:04:50 INFO2 take_data: Starting WAPP+GALFA scan: 911100229 2009-Apr-21 19:04:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:04:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:04:51 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-21 19:04:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:04:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Apr-21 19:04:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:04:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:04:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:04:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83092.00 2009-Apr-21 19:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.091 (still bad) 2009-Apr-21 19:04:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:04:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:04:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:04:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:04:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:04:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:04:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:04:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:04:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-21 19:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-21 19:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-21 19:05:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-21 19:05:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.927 0.963 0.967 0.958 2009-Apr-21 19:05:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 1.062 0.933 0.957 2009-Apr-21 19:05:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.966 1.012 0.930 0.999 2009-Apr-21 19:05:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.997 0.105 1.097 0.129 2009-Apr-21 19:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-21 19:05:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:05:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:05:02 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-21 19:05:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:05:02 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-21 19:05:02 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Apr-21 19:05:02 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-21 19:05:02 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-21 19:05:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-21 19:05:02 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-21 19:05:02 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-21 19:05:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-21 19:05:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-21 19:05:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-21 19:05:02 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-21 19:05:02 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2009-Apr-21 19:05:02 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2009-Apr-21 19:05:02 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-Apr-21 19:05:02 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:05:02 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30608 J 2009-Apr-21 19:05:02 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:05:02 LOG2 antvel: Parameters to Doppler: Topocentric 83102 2009 111 0.0 2009-Apr-21 19:05:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:05:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-Apr-21 19:05:02 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-Apr-21 19:05:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:05:02 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:05:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Apr-21 19:05:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:05:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Apr-21 19:05:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:05:02 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-21 19:05:02 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.643475 2009.3060784723807 18.999933 2009-Apr-21 19:05:02 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333347 2009-Apr-21 19:05:02 LOG4 log_alfabeam: ALFABEAM 1 9.709476787136127 21.848004836069332 2009-Apr-21 19:05:02 LOG4 log_alfabeam: ALFABEAM 2 9.715272885664504 21.792324604345033 2009-Apr-21 19:05:02 LOG4 log_alfabeam: ALFABEAM 3 9.722471299818956 21.827240307775689 2009-Apr-21 19:05:02 LOG4 log_alfabeam: ALFABEAM 4 9.723855921167898 21.918812769375464 2009-Apr-21 19:05:02 LOG4 log_alfabeam: ALFABEAM 5 9.718024544224402 21.974627214883068 2009-Apr-21 19:05:02 LOG4 log_alfabeam: ALFABEAM 6 9.710844015925048 21.938735429755592 2009-Apr-21 19:05:02 INFO2 take_data: Starting WAPP+GALFA scan: 911100230 2009-Apr-21 19:05:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:05:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:05:03 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-21 19:05:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:05:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Apr-21 19:05:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:05:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:05:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:05:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83104.00 2009-Apr-21 19:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-21 19:05:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:05:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:05:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:05:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:05:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:05:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:05:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:05:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:05:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.552 (still bad) 2009-Apr-21 19:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.556 (still bad) 2009-Apr-21 19:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.551 (still bad) 2009-Apr-21 19:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.551 (still bad) 2009-Apr-21 19:05:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:05:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:05:14 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-21 19:05:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:05:14 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-21 19:05:14 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2009-Apr-21 19:05:14 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2009-Apr-21 19:05:14 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2009-Apr-21 19:05:14 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:05:14 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30608 J 2009-Apr-21 19:05:14 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:05:14 LOG2 antvel: Parameters to Doppler: Topocentric 83114 2009 111 0.0 2009-Apr-21 19:05:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:05:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2009-Apr-21 19:05:14 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2009-Apr-21 19:05:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:05:14 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:05:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Apr-21 19:05:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:05:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Apr-21 19:05:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:05:14 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-21 19:05:14 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.646817 2009.3060788526377 18.999933 2009-Apr-21 19:05:14 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2009-Apr-21 19:05:14 LOG4 log_alfabeam: ALFABEAM 1 9.709478894981563 21.847921982373141 2009-Apr-21 19:05:14 LOG4 log_alfabeam: ALFABEAM 2 9.715278260973859 21.792308952824161 2009-Apr-21 19:05:14 LOG4 log_alfabeam: ALFABEAM 3 9.722474627373728 21.827306506928593 2009-Apr-21 19:05:14 LOG4 log_alfabeam: ALFABEAM 4 9.723853794438501 21.918896299437154 2009-Apr-21 19:05:14 LOG4 log_alfabeam: ALFABEAM 5 9.718019028583472 21.974643339050289 2009-Apr-21 19:05:14 LOG4 log_alfabeam: ALFABEAM 6 9.710840688250762 21.938667027427044 2009-Apr-21 19:05:14 INFO2 take_data: Starting WAPP+GALFA scan: 911100231 2009-Apr-21 19:05:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:05:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:05:15 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-21 19:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.569 (still bad) 2009-Apr-21 19:05:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:05:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Apr-21 19:05:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:05:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:05:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:05:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83116.00 2009-Apr-21 19:05:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:05:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:05:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:05:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:05:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:05:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:05:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:05:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.560 (still bad) 2009-Apr-21 19:05:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.500 (still bad) 2009-Apr-21 19:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.501 (still bad) 2009-Apr-21 19:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.498 (still bad) 2009-Apr-21 19:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.499 (still bad) 2009-Apr-21 19:05:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:05:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:05:26 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-21 19:05:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:05:26 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-21 19:05:26 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2009-Apr-21 19:05:26 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2009-Apr-21 19:05:26 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2009-Apr-21 19:05:26 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:05:26 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30608 J 2009-Apr-21 19:05:26 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:05:26 LOG2 antvel: Parameters to Doppler: Topocentric 83126 2009 111 0.0 2009-Apr-21 19:05:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:05:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2009-Apr-21 19:05:26 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2009-Apr-21 19:05:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:05:26 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:05:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Apr-21 19:05:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:05:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Apr-21 19:05:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:05:26 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-21 19:05:26 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.650160 2009.3060792328947 18.999933 2009-Apr-21 19:05:26 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666665 21.883333333333347 2009-Apr-21 19:05:26 LOG4 log_alfabeam: ALFABEAM 1 9.709481018458934 21.847838733869420 2009-Apr-21 19:05:26 LOG4 log_alfabeam: ALFABEAM 2 9.715283664370705 21.792293284428485 2009-Apr-21 19:05:26 LOG4 log_alfabeam: ALFABEAM 3 9.722477967841970 21.827373079056130 2009-Apr-21 19:05:26 LOG4 log_alfabeam: ALFABEAM 4 9.723851651881221 21.918980227934593 2009-Apr-21 19:05:26 LOG4 log_alfabeam: ALFABEAM 5 9.718013483960764 21.974659480236852 2009-Apr-21 19:05:26 LOG4 log_alfabeam: ALFABEAM 6 9.710837347889715 21.938598238802378 2009-Apr-21 19:05:26 INFO2 take_data: Starting WAPP+GALFA scan: 911100232 2009-Apr-21 19:05:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:05:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:05:27 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-21 19:05:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:05:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Apr-21 19:05:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:05:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:05:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.501 (still bad) 2009-Apr-21 19:05:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83128.00 2009-Apr-21 19:05:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:05:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:05:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:05:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:05:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:05:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:05:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:05:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:05:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.501 (still bad) 2009-Apr-21 19:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.496 (still bad) 2009-Apr-21 19:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.498 (still bad) 2009-Apr-21 19:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.495 (still bad) 2009-Apr-21 19:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.507 (still bad) 2009-Apr-21 19:05:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:05:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:05:38 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-21 19:05:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:05:38 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-21 19:05:38 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2009-Apr-21 19:05:38 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2009-Apr-21 19:05:38 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2009-Apr-21 19:05:38 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:05:38 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30608 J 2009-Apr-21 19:05:38 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:05:38 LOG2 antvel: Parameters to Doppler: Topocentric 83138 2009 111 0.0 2009-Apr-21 19:05:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:05:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2009-Apr-21 19:05:38 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2009-Apr-21 19:05:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:05:38 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:05:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Apr-21 19:05:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:05:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Apr-21 19:05:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:05:38 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-21 19:05:38 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.653502 2009.306079613152 18.999933 2009-Apr-21 19:05:38 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333340 2009-Apr-21 19:05:38 LOG4 log_alfabeam: ALFABEAM 1 9.709483156455647 21.847755137310457 2009-Apr-21 19:05:38 LOG4 log_alfabeam: ALFABEAM 2 9.715289092856143 21.792277608778921 2009-Apr-21 19:05:38 LOG4 log_alfabeam: ALFABEAM 3 9.722481319305754 21.827439987600435 2009-Apr-21 19:05:38 LOG4 log_alfabeam: ALFABEAM 4 9.723849494617854 21.919064507733388 2009-Apr-21 19:05:38 LOG4 log_alfabeam: ALFABEAM 5 9.718007913432107 21.974675628515318 2009-Apr-21 19:05:38 LOG4 log_alfabeam: ALFABEAM 6 9.710833996763684 21.938529101659125 2009-Apr-21 19:05:38 INFO2 take_data: Starting WAPP+GALFA scan: 911100233 2009-Apr-21 19:05:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:05:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:05:39 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-21 19:05:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:05:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Apr-21 19:05:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:05:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:05:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.498 (still bad) 2009-Apr-21 19:05:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83140.00 2009-Apr-21 19:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.493 (still bad) 2009-Apr-21 19:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.496 (still bad) 2009-Apr-21 19:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.491 (still bad) 2009-Apr-21 19:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.493 (still bad) 2009-Apr-21 19:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.504 (still bad) 2009-Apr-21 19:05:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:05:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:05:50 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-21 19:05:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:05:50 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-21 19:05:50 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2009-Apr-21 19:05:50 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2009-Apr-21 19:05:50 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2009-Apr-21 19:05:50 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:05:50 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30608 J 2009-Apr-21 19:05:50 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:05:50 LOG2 antvel: Parameters to Doppler: Topocentric 83150 2009 111 0.0 2009-Apr-21 19:05:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:05:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2009-Apr-21 19:05:50 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2009-Apr-21 19:05:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:05:50 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:05:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Apr-21 19:05:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:05:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Apr-21 19:05:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:05:50 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-21 19:05:50 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.656844 2009.306079993409 18.999933 2009-Apr-21 19:05:50 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2009-Apr-21 19:05:50 LOG4 log_alfabeam: ALFABEAM 1 9.709485309764538 21.847671164765551 2009-Apr-21 19:05:50 LOG4 log_alfabeam: ALFABEAM 2 9.715294548278907 21.792261921444886 2009-Apr-21 19:05:50 LOG4 log_alfabeam: ALFABEAM 3 9.722484682843641 21.827507255731007 2009-Apr-21 19:05:50 LOG4 log_alfabeam: ALFABEAM 4 9.723847321847618 21.919149166991879 2009-Apr-21 19:05:50 LOG4 log_alfabeam: ALFABEAM 5 9.718002315098985 21.974691788433542 2009-Apr-21 19:05:50 LOG4 log_alfabeam: ALFABEAM 6 9.710830633798059 21.938459592059264 2009-Apr-21 19:05:50 INFO2 take_data: Starting WAPP+GALFA scan: 911100234 2009-Apr-21 19:05:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:05:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:05:51 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-21 19:05:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:05:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Apr-21 19:05:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:05:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:05:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:05:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83152.00 2009-Apr-21 19:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.498 (still bad) 2009-Apr-21 19:05:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:05:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:05:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:05:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:05:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:05:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:05:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:05:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:05:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.500 (still bad) 2009-Apr-21 19:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.503 (still bad) 2009-Apr-21 19:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.501 (still bad) 2009-Apr-21 19:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.502 (still bad) 2009-Apr-21 19:06:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-21 19:06:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.260 1.285 1.280 1.270 2009-Apr-21 19:06:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.470 1.456 1.271 1.286 2009-Apr-21 19:06:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.320 1.384 1.279 1.315 2009-Apr-21 19:06:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.365 0.105 1.504 0.129 2009-Apr-21 19:06:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:06:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:06:02 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-21 19:06:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:06:02 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-21 19:06:02 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2009-Apr-21 19:06:02 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2009-Apr-21 19:06:02 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2009-Apr-21 19:06:02 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:06:02 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30608 J 2009-Apr-21 19:06:02 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:06:02 LOG2 antvel: Parameters to Doppler: Topocentric 83162 2009 111 0.0 2009-Apr-21 19:06:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:06:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2009-Apr-21 19:06:02 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2009-Apr-21 19:06:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:06:02 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:06:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Apr-21 19:06:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:06:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Apr-21 19:06:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:06:02 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-21 19:06:02 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.660187 2009.306080373666 18.999933 2009-Apr-21 19:06:02 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666667 21.883333333333333 2009-Apr-21 19:06:02 LOG4 log_alfabeam: ALFABEAM 1 9.709487479198954 21.847586787821516 2009-Apr-21 19:06:02 LOG4 log_alfabeam: ALFABEAM 2 9.715300032522693 21.792246217989486 2009-Apr-21 19:06:02 LOG4 log_alfabeam: ALFABEAM 3 9.722488059549267 21.827574907087691 2009-Apr-21 19:06:02 LOG4 log_alfabeam: ALFABEAM 4 9.723845132748952 21.919234234355368 2009-Apr-21 19:06:02 LOG4 log_alfabeam: ALFABEAM 5 9.717996687026810 21.974707964545061 2009-Apr-21 19:06:02 LOG4 log_alfabeam: ALFABEAM 6 9.710827257903523 21.938389685577786 2009-Apr-21 19:06:02 INFO2 take_data: Starting WAPP+GALFA scan: 911100235 2009-Apr-21 19:06:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:06:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:06:03 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-21 19:06:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:06:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Apr-21 19:06:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:06:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:06:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:06:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83164.00 2009-Apr-21 19:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.504 (still bad) 2009-Apr-21 19:06:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:06:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:06:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:06:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:06:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:06:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:06:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:06:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:06:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.507 (still bad) 2009-Apr-21 19:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.510 (still bad) 2009-Apr-21 19:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.509 (still bad) 2009-Apr-21 19:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.510 (still bad) 2009-Apr-21 19:06:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.512 (still bad) 2009-Apr-21 19:06:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:06:14 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-21 19:06:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:06:14 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-21 19:06:14 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2009-Apr-21 19:06:14 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2009-Apr-21 19:06:14 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2009-Apr-21 19:06:14 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:06:14 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30608 J 2009-Apr-21 19:06:14 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:06:14 LOG2 antvel: Parameters to Doppler: Topocentric 83174 2009 111 0.0 2009-Apr-21 19:06:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:06:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2009-Apr-21 19:06:14 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2009-Apr-21 19:06:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:06:14 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:06:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Apr-21 19:06:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:06:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Apr-21 19:06:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-21 19:06:14 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-21 19:06:14 LOG5 log_alfabeam: Parameters: 9.7166666666666668 21.883333333333333 8.663529 2009.306080753923 18.999933 2009-Apr-21 19:06:14 LOG4 log_alfabeam: ALFABEAM 0 9.716666666666663 21.883333333333333 2009-Apr-21 19:06:14 LOG4 log_alfabeam: ALFABEAM 1 9.709489663625320 21.847502053808185 2009-Apr-21 19:06:14 LOG4 log_alfabeam: ALFABEAM 2 9.715305542548379 21.792230508077584 2009-Apr-21 19:06:14 LOG4 log_alfabeam: ALFABEAM 3 9.722491447484792 21.827642904587059 2009-Apr-21 19:06:14 LOG4 log_alfabeam: ALFABEAM 4 9.723842928464883 21.919319662106254 2009-Apr-21 19:06:14 LOG4 log_alfabeam: ALFABEAM 5 9.717991032332938 21.974724146876820 2009-Apr-21 19:06:14 LOG4 log_alfabeam: ALFABEAM 6 9.710823871021525 21.938319420537592 2009-Apr-21 19:06:14 INFO2 take_data: Starting WAPP+GALFA scan: 911100236 2009-Apr-21 19:06:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Apr-21 19:06:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-21 19:06:15 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-21 19:06:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:06:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Apr-21 19:06:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:06:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:06:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:06:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83176.00 2009-Apr-21 19:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.512 (still bad) 2009-Apr-21 19:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.515 (still bad) 2009-Apr-21 19:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.517 (still bad) 2009-Apr-21 19:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.517 (still bad) 2009-Apr-21 19:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.517 (still bad) 2009-Apr-21 19:06:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:06:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-21 19:06:26 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-21 19:06:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-21 19:06:26 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-21 19:06:26 INFO2 smartfreq: Switching off CAL 2009-Apr-21 19:06:26 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-21 19:06:26 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-21 19:06:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-21 19:06:26 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-21 19:06:26 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-21 19:06:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-21 19:06:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-21 19:06:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-21 19:06:26 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-21 19:06:26 INFO3 restore_frequencies: Restoring original frequencies 2009-Apr-21 19:06:26 LOG5 antvel: Calling 'antvel 94300.000000 215300.000000 J 0' 2009-Apr-21 19:06:26 LOG2 antvel: Precessing RA = 09:43:00.0 Dec = +21:53:00.0 Epoch = 2009.30608 J 2009-Apr-21 19:06:26 LOG2 antvel: Computed apparent RA = 09:43:32.9 Dec = +21:50:24.9 2009-Apr-21 19:06:26 LOG2 antvel: Parameters to Doppler: Topocentric 83186 2009 111 0.0 2009-Apr-21 19:06:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-21 19:06:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2009-Apr-21 19:06:26 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2009-Apr-21 19:06:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:06:26 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:06:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2009-Apr-21 19:06:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:06:26 STOP finish_task: Finishing task 'smart frequency switching' 2009-Apr-21 19:06:26 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-21 19:06:26 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Apr-21 19:06:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-21 19:06:26 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Apr-21 19:06:26 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-21 19:06:26 NOTE run_command_file: DONE with command file processing 2009-Apr-21 19:06:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Apr-21 19:06:26 STOP finish_task: Finishing task 'running command file 'command_galfasrc.cmd'' 2009-Apr-21 19:06:26 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-21 19:06:26 DONE finish_task: DONE finished running: command file 'command_galfasrc.cmd' 2009-Apr-21 19:06:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-21 19:06:27 END end_task: Finishing task 'running command file 'command_galfasrc.cmd'' with status 'OK' 2009-Apr-21 19:06:27 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-21 19:06:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2009-Apr-21 19:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.520 (still bad) 2009-Apr-21 19:06:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:06:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:06:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:07:23 INFO1 CIMA-run_command_file: Transferring command file '090421.cmd ' to executive ... 2009-Apr-21 19:07:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2009-Apr-21 19:07:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2009-Apr-21 19:07:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 5 {CATALOG AGESFull.cat} 2009-Apr-21 19:07:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF LSTSLEW(AGES3193_p2_084) < 090532 THEN} 2009-Apr-21 19:07:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {FIXEDDRIFT az=251.16 alfaangle=-53.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_084 ra=95300.00 dec=214830.00} 2009-Apr-21 19:07:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {ENDIF} 2009-Apr-21 19:07:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 15 {IF LSTSLEW(AGES3193_p2_086) < 092832 THEN} 2009-Apr-21 19:07:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 16 {FIXEDDRIFT az=239.18 alfaangle=-38.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_086 ra=95300.00 dec=214530.00} 2009-Apr-21 19:07:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 19 {ENDIF} 2009-Apr-21 19:07:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 22 {IF LSTSLEW(AGES3193_p2_088) < 095132 THEN} 2009-Apr-21 19:07:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 23 {FIXEDDRIFT az=187.99 alfaangle=12.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_088 ra=95300.00 dec=214230.00} 2009-Apr-21 19:07:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 26 {ENDIF} 2009-Apr-21 19:07:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 29 {IF LSTSLEW(AGES3193_p2_090) < 101532 THEN} 2009-Apr-21 19:07:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 30 {FIXEDDRIFT az=123.16 alfaangle=73.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_090 ra=95300.00 dec=213930.00} 2009-Apr-21 19:07:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 33 {ENDIF} 2009-Apr-21 19:07:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 36 {IF LSTSLEW(AGES3193_p2_092) < 103832 THEN} 2009-Apr-21 19:07:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 37 {FIXEDDRIFT az=108.76 alfaangle=-88.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_092 ra=95300.00 dec=213630.00} 2009-Apr-21 19:07:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 40 {ENDIF} 2009-Apr-21 19:07:23 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Apr-21 19:07:23 LOG4 exec_msg: From OBSERVER: run_command_file 090421.cmd 1 1 18 2009-Apr-21 19:07:23 LOG4 run_command_file: Calling 'run_command_file 090421.cmd 1 1 18' 2009-Apr-21 19:07:23 BEGIN begin_task: Starting task 'running command file '090421.cmd'' 2009-Apr-21 19:07:23 LOG5 begin_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-21 19:07:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '090421.cmd' ...} 2009-Apr-21 19:07:23 NOTE run_command_file: Starting execution of command file '090421.cmd' from line 1 2009-Apr-21 19:07:23 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2009-Apr-21 19:07:23 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Apr-21 19:07:24 NOTE CIMA-check_config_file: File 'ages_config.conf' contains an ALFA set-up which will be ignored! 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-21 19:07:24 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Apr-21 19:07:24 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-21 19:07:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-21 19:07:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-21 19:07:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-21 19:07:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-21 19:07:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-21 19:07:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-21 19:07:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-21 19:07:26 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-21 19:07:26 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-21 19:07:26 LOG5 begin_task: Level: (2) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-21 19:07:26 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-21 19:07:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-21 19:07:26 LOG1 config_iflo: Receiver ALFA already selected 2009-Apr-21 19:07:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-21 19:07:26 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-21 19:07:26 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-21 19:07:26 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-21 19:07:26 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-21 19:07:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-21 19:07:26 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-21 19:07:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-21 19:07:26 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-21 19:07:26 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Apr-21 19:07:26 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Apr-21 19:07:26 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-21 19:07:26 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-21 19:07:26 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Apr-21 19:07:26 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Apr-21 19:07:26 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Apr-21 19:07:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2009-Apr-21 19:07:26 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Apr-21 19:07:26 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Apr-21 19:07:26 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-21 19:07:26 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-21 19:07:26 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-21 19:07:26 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-21 19:07:26 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-21 19:07:26 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Apr-21 19:07:26 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Apr-21 19:07:26 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Apr-21 19:07:26 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Apr-21 19:07:26 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-21 19:07:26 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Apr-21 19:07:26 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Apr-21 19:07:26 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-21 19:07:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:07:26 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Apr-21 19:07:26 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Apr-21 19:07:26 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-21 19:07:26 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Apr-21 19:07:26 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Apr-21 19:07:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-21 19:07:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 19:07:26 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-21 19:07:26 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-21 19:07:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2009-Apr-21 19:07:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-21 19:07:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:07:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 19:07:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:07:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:07:26 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Apr-21 19:07:26 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-21 19:07:26 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-21 19:07:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-21 19:07:26 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-21 19:07:26 LOG5 finish_task: Level: (2) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-21 19:07:26 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-21 19:07:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-21 19:07:26 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-21 19:07:26 LOG5 end_task: Level: (2) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-21 19:07:26 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-21 19:07:26 LOG5 begin_task: Level: (2) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-21 19:07:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-21 19:07:26 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-21 19:07:27 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-21 19:07:27 START begin_task: Starting task 'selecting calibration port' 2009-Apr-21 19:07:27 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-21 19:07:27 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-21 19:07:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-21 19:07:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 19:07:27 START begin_task: Starting task 'waiting on calport' 2009-Apr-21 19:07:27 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-21 19:07:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:07:27 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-21 19:07:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 19:07:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:07:27 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-21 19:07:27 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-21 19:07:27 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-21 19:07:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-21 19:07:27 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-21 19:07:27 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-21 19:07:27 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-21 19:07:27 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-21 19:07:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-21 19:07:27 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-21 19:07:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:07:27 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-21 19:07:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-21 19:07:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-21 19:07:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-21 19:07:27 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-21 19:07:27 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-21 19:07:27 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-21 19:07:27 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-21 19:07:27 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-21 19:07:27 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-21 19:07:27 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-21 19:07:27 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-21 19:07:27 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-21 19:07:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-Apr-21 19:07:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-Apr-21 19:07:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-Apr-21 19:07:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-Apr-21 19:07:27 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-21 19:07:27 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-21 19:07:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-21 19:07:27 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-21 19:07:27 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-21 19:07:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-21 19:07:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-21 19:07:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-21 19:07:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-21 19:07:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-21 19:07:27 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-21 19:07:27 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Apr-21 19:07:27 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-21 19:07:27 LOG5 finish_task: Level: (2) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-21 19:07:27 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-21 19:07:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-21 19:07:27 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-21 19:07:27 LOG5 end_task: Level: (2) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-21 19:07:28 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2009-Apr-21 19:07:28 COMMAND run_command_line: EXECUTING command 5: 'CATALOG AGESFull.cat' 2009-Apr-21 19:07:28 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2009-Apr-21 19:07:28 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGES3193_p2_084) < 090532 THEN' 2009-Apr-21 19:07:28 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_084) < 090532 2009-Apr-21 19:07:28 INFO5 is_if_valid: Condition parsed as: 8.6988630000000011 < 9.0922222222222224 2009-Apr-21 19:07:28 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=251.16 alfaangle=-53.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_084 ra=95300.00 dec=214830.00' 2009-Apr-21 19:07:28 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-Apr-21 19:07:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-Apr-21 19:07:28 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-21 19:07:29 WARNING check_obsmode: WARNING failed to get a response from the CIMA frontend when checking options for 'fixed azimuth drift map'! 2009-Apr-21 19:07:29 NOTE check_obsmode: Assuming that the options are OK 2009-Apr-21 19:07:29 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 251.16 -53.8 hcorcal 5 tracking no first 1 AGES3193_p2_084 95300.00 214830.00 J 8500.0 Heliocentric velocity(optical)' 2009-Apr-21 19:07:29 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Apr-21 19:07:29 LOG5 begin_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-21 19:07:29 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc2' 2009-Apr-21 19:07:29 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Apr-21 19:07:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_084} 2009-Apr-21 19:07:29 INFO3 fixed_driftmap: Sending telescope to Az = 251.16 and ZA = 11.77 2009-Apr-21 19:07:29 LOG3 track_source: Calling 'track_source AGES3193_p2_084 251.16 11.7696346939 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Apr-21 19:07:29 START begin_task: Starting task 'sending tracking commands' 2009-Apr-21 19:07:29 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-21 19:07:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_084} INFO {Slewing to source 'AGES3193_p2_084' ...} 2009-Apr-21 19:07:29 INFO1 track_source: Starting to track AGES3193_p2_084 2009-Apr-21 19:07:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_084" 2009-Apr-21 19:07:29 LOG3 vw_send: To DATATAKING: set ra 251.16 2009-Apr-21 19:07:29 LOG3 vw_send: To DATATAKING: set dec 11.7696346939 2009-Apr-21 19:07:29 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-21 19:07:29 LOG3 vw_send: To DATATAKING: pnt tr 251.16 11.7696346939 -CF 2009-Apr-21 19:07:29 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 19:07:29 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-21 19:07:29 LOG5 finish_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-21 19:07:29 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-21 19:07:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 19:07:29 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-21 19:07:29 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-21 19:07:29 START begin_task: Starting task 'rotate ALFA to -53.8 degrees' 2009-Apr-21 19:07:29 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-21 19:07:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -53.8 degrees ...} 2009-Apr-21 19:07:34 INFO2 rotate_alfa: ALFA commanded to -53.8 degrees 2009-Apr-21 19:07:34 LOG3 sock_errsend: To ALFAMOTOR: POSITION -53.8 REPLY 2009-Apr-21 19:07:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-21 19:07:34 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-21 19:07:34 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-21 19:07:34 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-21 19:07:34 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_084" 2009-Apr-21 19:07:34 LOG4 got_cormsg: From DATATAKING: set ra 251.16 2009-Apr-21 19:07:34 LOG4 got_cormsg: From DATATAKING: set dec 11.7696346939 2009-Apr-21 19:07:34 LOG4 got_cormsg: From DATATAKING: vw% 251.16 2009-Apr-21 19:07:34 LOG4 got_cormsg: From DATATAKING: vw% 11.7696346939 2009-Apr-21 19:07:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:07:34 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-21 19:07:34 LOG4 got_cormsg: From DATATAKING: pnt tr 251.16 11.7696346939 -CF 2009-Apr-21 19:07:34 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 19:07:34 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2009-Apr-21 19:08:15 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-21 19:08:15 INFO3 alfa_motor: ALFA rotator in-position -53.80 degrees 2009-Apr-21 19:08:15 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-21 19:08:15 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-21 19:08:15 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-21 19:08:15 STOP finish_task: Finishing task 'rotate ALFA to -53.8 degrees' 2009-Apr-21 19:08:15 LOG5 finish_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-21 19:08:15 INFO2 finish_task: DONE finished configuration: rotating ALFA to -53.8 degrees 2009-Apr-21 19:08:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 19:08:15 STOP end_task: Finishing task 'rotate ALFA to -53.8 degrees' with status 'OK' 2009-Apr-21 19:08:15 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-21 19:08:15 START begin_task: Starting task 'waiting on telescope' 2009-Apr-21 19:08:15 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-21 19:08:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-21 19:08:15 LOG3 waittrk: Start waittrk 5 2009-Apr-21 19:08:15 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-21 19:08:15 LOG5 begin_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2009-Apr-21 19:08:20 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-21 19:08:20 LOG5 end_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2009-Apr-21 19:08:20 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-21 19:08:20 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-21 19:08:59 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-21 19:08:59 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-21 19:08:59 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-21 19:08:59 INFO2 waittrk: Now tracking AGES3193_p2_084 2009-Apr-21 19:08:59 LOG4 waittrk: Current telescope position: Az = 250.70 ZA = 11.78 2009-Apr-21 19:08:59 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-21 19:08:59 LOG5 finish_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-21 19:08:59 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-21 19:08:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 19:08:59 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-21 19:08:59 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-21 19:08:59 START begin_task: Starting task 'selecting calibration type' 2009-Apr-21 19:08:59 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-21 19:08:59 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-21 19:08:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-21 19:08:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 19:08:59 START begin_task: Starting task 'waiting on setcal' 2009-Apr-21 19:08:59 LOG5 begin_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2009-Apr-21 19:08:59 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-21 19:08:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 19:08:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:08:59 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-21 19:08:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-21 19:08:59 LOG5 end_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2009-Apr-21 19:08:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-21 19:08:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-21 19:08:59 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-21 19:08:59 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-21 19:08:59 LOG5 begin_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-21 19:08:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:08:59 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-21 19:08:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-21 19:08:59 LOG5 end_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-21 19:08:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-21 19:08:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-21 19:08:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-21 19:08:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-21 19:08:59 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-21 19:08:59 LOG5 begin_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-21 19:08:59 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-21 19:08:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-21 19:08:59 LOG5 end_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-21 19:08:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-21 19:08:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-21 19:08:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-21 19:08:59 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-21 19:08:59 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-Apr-21 19:08:59 INFO2 astwait: Waiting for 1316 seconds from 23:08:59 to 23:30:55 UTC ... 2009-Apr-21 19:08:59 LOG4 send_obs_status: To obs_status: <1> TASKTIME 1316 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Apr-21 19:09:00 START begin_task: Starting task 'waiting on waiting for AST time' 2009-Apr-21 19:09:00 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-21 19:30:55 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-Apr-21 19:30:55 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-21 19:30:55 INFO3 astwait: Finished waiting 2009-Apr-21 19:30:55 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-21 19:30:55 LOG5 dopset_later: Calling 'dopset_later 60.501241573264181' 2009-Apr-21 19:30:55 INFO3 dopset_later: Setting Doppler correction for 19:31:55 (60.5 seconds from now) 2009-Apr-21 19:30:55 LOG5 antvel: Calling 'antvel 251.160000 11.769635 F 60.501241573264181' 2009-Apr-21 19:30:55 LOG2 antvel: Transforming current Az = 251.16 ZA = 11.77 to apparent RA = 09:53:32.6 Dec = +21:45:50.0 2009-Apr-21 19:30:55 LOG2 antvel: Parameters to Doppler: Heliocentric 84715 2009 111 0.0 2009-Apr-21 19:30:55 INFO5 antvel: Computed antenna velocity: +27.09634 km/s 2009-Apr-21 19:30:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.096344070099999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-Apr-21 19:30:55 INFO4 dopset_gen: New sky frequencies: 1381.118598 1381.118598 1381.118598 1381.118598 1381.118598 1381.118598 1381.118598 1381.118598 1381.118598 2009-Apr-21 19:30:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.118598 sky0=1381.118598 sky1=1381.118598 sky2=1381.118598 sky3=1381.118598 sky4=1381.118598 sky5=1381.118598 sky6=1381.118598 sky7=1381.118598 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:30:55 LOG2 dopset_gen: Result from 'sky2syn': 1631.118598 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:30:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631118598.0} 2009-Apr-21 19:30:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:30:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-Apr-21 19:30:55 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-Apr-21 19:30:55 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.9 Dec = +21:48:28.3 2009-Apr-21 19:30:55 LOG3 track_source: Calling 'track_source AGES3193_p2_084 095203.9 214828.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Apr-21 19:30:55 START begin_task: Starting task 'sending tracking commands' 2009-Apr-21 19:30:55 LOG5 begin_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-21 19:30:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_084} INFO {Slewing to source 'AGES3193_p2_084' ...} 2009-Apr-21 19:30:55 INFO1 track_source: Starting to track AGES3193_p2_084 2009-Apr-21 19:30:55 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_084" 2009-Apr-21 19:30:55 LOG3 vw_send: To DATATAKING: set ra 095203.9 2009-Apr-21 19:30:55 LOG3 vw_send: To DATATAKING: set dec 214828.3 2009-Apr-21 19:30:55 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-21 19:30:55 LOG3 vw_send: To DATATAKING: pnt tr 095203.9 214828.3 -CJ 2009-Apr-21 19:30:55 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 19:30:55 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-21 19:30:55 LOG5 finish_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-21 19:30:55 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-21 19:30:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 19:30:55 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-21 19:30:55 LOG5 end_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-21 19:30:55 START begin_task: Starting task 'waiting on telescope' 2009-Apr-21 19:30:55 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-21 19:30:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-21 19:30:55 LOG3 waittrk: Start waittrk 5 2009-Apr-21 19:30:55 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-21 19:30:55 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-21 19:30:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631118598.0} 2009-Apr-21 19:30:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:30:55 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_084" 2009-Apr-21 19:30:55 LOG4 got_cormsg: From DATATAKING: set ra 095203.9 2009-Apr-21 19:30:55 LOG4 got_cormsg: From DATATAKING: set dec 214828.3 2009-Apr-21 19:30:55 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-21 19:30:55 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.9 214828.3 -CJ 2009-Apr-21 19:30:55 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 19:30:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:30:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 095203.9 2009-Apr-21 19:30:56 LOG4 got_cormsg: From DATATAKING: vw% 214828.3 2009-Apr-21 19:30:56 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2009-Apr-21 19:31:00 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-21 19:31:00 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-21 19:31:00 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-21 19:31:00 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-21 19:31:03 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-21 19:31:03 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-21 19:31:03 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-21 19:31:03 INFO2 waittrk: Now tracking AGES3193_p2_084 2009-Apr-21 19:31:03 LOG4 waittrk: Current telescope position: Az = 250.68 ZA = 11.76 2009-Apr-21 19:31:03 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-21 19:31:03 LOG5 finish_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-21 19:31:03 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-21 19:31:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 19:31:03 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-21 19:31:03 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-21 19:31:03 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-21 19:31:03 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-21 19:31:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-21 19:31:03 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-21 19:31:03 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-21 19:31:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-21 19:31:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 19:31:04 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-21 19:31:04 LOG5 begin_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-21 19:31:04 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-21 19:31:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 19:31:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:31:07 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-21 19:31:07 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-21 19:31:07 LOG5 end_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-21 19:31:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-21 19:31:07 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-21 19:31:07 LOG5 begin_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-21 19:31:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-21 19:31:07 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-21 19:31:07 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-21 19:31:07 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-21 19:31:07 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-21 19:31:07 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-21 19:31:07 LOG5 begin_task: Level: (5) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-21 19:31:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:31:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-21 19:31:07 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 6 dB 2009-Apr-21 19:31:07 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-21 19:31:07 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 3 dB 2009-Apr-21 19:31:07 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-21 19:31:07 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-21 19:31:07 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-21 19:31:07 LOG5 end_task: Level: (5) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-21 19:31:07 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.908 0.918 ALFA beam 1: 0.919 1.070 2009-Apr-21 19:31:07 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.038 0.985 ALFA beam 3: 1.114 1.101 2009-Apr-21 19:31:07 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.898 0.958 ALFA beam 5: 0.934 0.992 2009-Apr-21 19:31:07 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.999 0.103 ALFA beam 7: 1.100 0.128 2009-Apr-21 19:31:07 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-21 19:31:07 LOG5 finish_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-21 19:31:07 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-21 19:31:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 19:31:07 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-21 19:31:07 LOG5 end_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-21 19:31:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-21 19:31:08 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-21 19:31:08 LOG5 finish_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-21 19:31:08 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-21 19:31:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 19:31:08 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-21 19:31:08 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-21 19:31:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-Apr-21 19:31:08 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-Apr-21 19:31:08 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-Apr-21 19:31:08 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-Apr-21 19:31:08 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-Apr-21 19:31:08 START begin_task: Starting task 'WAPP calibration' 2009-Apr-21 19:31:08 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-21 19:31:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-21 19:31:08 START begin_task: Starting task 'selecting calibration type' 2009-Apr-21 19:31:08 LOG5 begin_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-21 19:31:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-21 19:31:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-21 19:31:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 19:31:08 START begin_task: Starting task 'waiting on setcal' 2009-Apr-21 19:31:08 LOG5 begin_task: Level: (5) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-21 19:31:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-Apr-21 19:31:08 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-21 19:31:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 19:31:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:31:08 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-21 19:31:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-21 19:31:08 LOG5 end_task: Level: (5) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-21 19:31:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-21 19:31:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-21 19:31:08 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-21 19:31:08 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-21 19:31:08 LOG5 begin_task: Level: (5) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-21 19:31:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:31:08 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-21 19:31:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-21 19:31:08 LOG5 end_task: Level: (5) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-21 19:31:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-21 19:31:08 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-21 19:31:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-21 19:31:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-21 19:31:08 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-21 19:31:08 LOG5 begin_task: Level: (5) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-21 19:31:08 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-21 19:31:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-21 19:31:08 LOG5 end_task: Level: (5) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-21 19:31:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-21 19:31:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-21 19:31:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-21 19:31:08 LOG5 end_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-21 19:31:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-21 19:31:08 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-21 19:31:08 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-21 19:31:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-21 19:31:08 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-21 19:31:08 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-21 19:31:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-21 19:31:08 NOTE WAPPDATA-new_file: New FITS file: wapp.20090421.a2048.0001.fits 2009-Apr-21 19:31:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-21 19:31:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-21 19:31:08 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-21 19:31:08 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-21 19:31:08 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-Apr-21 19:31:08 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-21 19:31:08 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-21 19:31:08 LOG5 log_alfabeam: Parameters: 9.8677499999999991 21.807861111111109 9.079666 2009.3061280959262 -53.800076 2009-Apr-21 19:31:08 LOG4 log_alfabeam: ALFABEAM 0 9.867750000000001 21.807861111111105 2009-Apr-21 19:31:08 LOG4 log_alfabeam: ALFABEAM 1 9.868591777343415 21.717060880555032 2009-Apr-21 19:31:08 LOG4 log_alfabeam: ALFABEAM 2 9.874713378350533 21.777228276375936 2009-Apr-21 19:31:08 LOG4 log_alfabeam: ALFABEAM 3 9.873841288206266 21.868719782071263 2009-Apr-21 19:31:08 LOG4 log_alfabeam: ALFABEAM 4 9.866855700218636 21.898653053429708 2009-Apr-21 19:31:08 LOG4 log_alfabeam: ALFABEAM 5 9.860781015024873 21.837610246530524 2009-Apr-21 19:31:08 LOG4 log_alfabeam: ALFABEAM 6 9.861644824545865 21.747508022329889 2009-Apr-21 19:31:09 INFO2 take_data: Starting WAPP scan: 911100237 2009-Apr-21 19:31:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Apr-21 19:31:09 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-21 19:31:09 LOG5 begin_task: Level: (5) ID = <10127> Status = 0 0 0 0 ok 2009-Apr-21 19:31:09 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090421.a2048.0001.fits} 2009-Apr-21 19:31:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:31:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84670.00 2009-Apr-21 19:31:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:31:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.908 0.918 0.919 1.070 2009-Apr-21 19:31:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.038 0.985 1.114 1.101 2009-Apr-21 19:31:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.898 0.958 0.934 0.992 2009-Apr-21 19:31:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.999 0.103 1.100 0.128 2009-Apr-21 19:31:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.118598 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:31:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.118598 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:31:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.118598 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:31:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.118598 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:31:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.118598 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:31:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.118598 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:31:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.118598 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:31:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.118598 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:31:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.118598 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:31:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:31:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-21 19:31:15 LOG5 end_task: Level: (5) ID = <10127> Status = 0 0 0 0 ok 2009-Apr-21 19:31:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-21 19:31:15 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-21 19:31:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-21 19:31:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-21 19:31:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-21 19:31:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-21 19:31:15 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-21 19:31:15 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-21 19:31:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-21 19:31:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-21 19:31:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-21 19:31:15 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-21 19:31:15 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-Apr-21 19:31:15 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-Apr-21 19:31:15 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-21 19:31:15 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-21 19:31:15 LOG5 log_alfabeam: Parameters: 9.8677499999999991 21.807861111111109 9.081615 2009.3061283177428 -53.800076 2009-Apr-21 19:31:15 LOG4 log_alfabeam: ALFABEAM 0 9.867749999999994 21.807861111111102 2009-Apr-21 19:31:15 LOG4 log_alfabeam: ALFABEAM 1 9.868596754464079 21.717069964701672 2009-Apr-21 19:31:15 LOG4 log_alfabeam: ALFABEAM 2 9.874715074602031 21.777302301797807 2009-Apr-21 19:31:15 LOG4 log_alfabeam: ALFABEAM 3 9.873837886307248 21.868785976381517 2009-Apr-21 19:31:15 LOG4 log_alfabeam: ALFABEAM 4 9.866850598611681 21.898643385803140 2009-Apr-21 19:31:15 LOG4 log_alfabeam: ALFABEAM 5 9.860779364715027 21.837534273909597 2009-Apr-21 19:31:15 LOG4 log_alfabeam: ALFABEAM 6 9.861648154312078 21.747442960492453 2009-Apr-21 19:31:15 INFO2 take_data: Starting WAPP scan: 911100238 2009-Apr-21 19:31:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Apr-21 19:31:16 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-21 19:31:16 LOG5 begin_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-21 19:31:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.569 (still bad) 2009-Apr-21 19:31:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84677.00 2009-Apr-21 19:31:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.118598 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:31:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.118598 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:31:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.118598 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:31:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.118598 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.569 (still bad) 2009-Apr-21 19:31:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.118598 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:31:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.118598 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:31:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.118598 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:31:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.118598 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:31:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.118598 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:31:22 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-Apr-21 19:31:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:31:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-21 19:31:22 LOG5 end_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-21 19:31:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-21 19:31:22 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-21 19:31:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-21 19:31:22 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-21 19:31:22 LOG5 finish_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-21 19:31:22 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-21 19:31:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 19:31:22 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-21 19:31:22 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-21 19:31:22 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-Apr-21 19:31:22 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 251.16 and ZA = 11.77 2009-Apr-21 19:31:22 LOG3 track_source: Calling 'track_source AGES3193_p2_084 251.16 11.7696346939 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Apr-21 19:31:22 START begin_task: Starting task 'sending tracking commands' 2009-Apr-21 19:31:22 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-21 19:31:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_084} INFO {Slewing to source 'AGES3193_p2_084' ...} 2009-Apr-21 19:31:22 INFO1 track_source: Starting to track AGES3193_p2_084 2009-Apr-21 19:31:22 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_084" 2009-Apr-21 19:31:22 LOG3 vw_send: To DATATAKING: set ra 251.16 2009-Apr-21 19:31:22 LOG3 vw_send: To DATATAKING: set dec 11.7696346939 2009-Apr-21 19:31:22 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-21 19:31:22 LOG3 vw_send: To DATATAKING: pnt tr 251.16 11.7696346939 -CF 2009-Apr-21 19:31:22 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 19:31:23 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-21 19:31:23 LOG5 finish_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-21 19:31:23 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-21 19:31:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 19:31:23 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-21 19:31:23 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-21 19:31:23 LOG1 fixed_driftmap: Parameters: HA = -00:47:59.4 Start = 09:05:33.4 LST = 09:05:00.8 diff = 32.6 secs 2009-Apr-21 19:31:23 INFO2 fixed_driftmap: Waiting 30.6 seconds for RA 9:53:33 2009-Apr-21 19:31:23 INFO2 lstwait: Waiting for 30.5 secs from LST 09:05:01 to LST 09:05:31 ... 2009-Apr-21 19:31:23 LOG4 send_obs_status: To obs_status: <1> TASKTIME 30.506962175822672 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Apr-21 19:31:23 START begin_task: Starting task 'waiting on wait on LST' 2009-Apr-21 19:31:23 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-21 19:31:23 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_084" 2009-Apr-21 19:31:23 LOG4 got_cormsg: From DATATAKING: set ra 251.16 2009-Apr-21 19:31:23 LOG4 got_cormsg: From DATATAKING: set dec 11.7696346939 2009-Apr-21 19:31:23 LOG4 got_cormsg: From DATATAKING: vw% 251.16 2009-Apr-21 19:31:23 LOG4 got_cormsg: From DATATAKING: vw% 11.7696346939 2009-Apr-21 19:31:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:31:23 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-21 19:31:23 LOG4 got_cormsg: From DATATAKING: pnt tr 251.16 11.7696346939 -CF 2009-Apr-21 19:31:23 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 19:31:23 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-21 19:31:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 19:31:53 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Apr-21 19:31:53 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-21 19:31:53 LOG4 lstwait: Finished waiting 0.50 seconds late 2009-Apr-21 19:31:53 INFO3 lstwait: Finished waiting 2009-Apr-21 19:31:53 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-21 19:31:53 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-Apr-21 19:31:53 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-21 19:31:53 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-Apr-21 19:31:53 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-21 19:31:53 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-Apr-21 19:31:53 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-21 19:31:53 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-21 19:31:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-21 19:31:53 INFO2 take_data: Starting WAPP scan: 911100239 2009-Apr-21 19:31:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-Apr-21 19:31:54 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-21 19:31:54 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2009-Apr-21 19:31:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:31:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84715.00 2009-Apr-21 19:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.118598 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.118598 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.118598 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.118598 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.118598 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.118598 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.118598 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.118598 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:31:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.118598 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 19:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.145 (still bad) 2009-Apr-21 19:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:32:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:32:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 0.920 0.920 1.070 2009-Apr-21 19:32:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 0.988 1.140 1.108 2009-Apr-21 19:32:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.904 0.961 0.937 0.994 2009-Apr-21 19:32:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.001 0.103 1.101 0.128 2009-Apr-21 19:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.145 (still bad) 2009-Apr-21 19:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 19:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-21 19:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.145 (still bad) 2009-Apr-21 19:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 19:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.140 (still bad) 2009-Apr-21 19:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 19:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.145 (still bad) 2009-Apr-21 19:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 19:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 19:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.146 (still bad) 2009-Apr-21 19:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 19:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 19:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.145 (still bad) 2009-Apr-21 19:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 19:33:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:33:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.912 0.921 0.925 1.074 2009-Apr-21 19:33:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.038 0.987 1.138 1.105 2009-Apr-21 19:33:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.901 0.960 0.937 0.993 2009-Apr-21 19:33:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.001 0.103 1.102 0.128 2009-Apr-21 19:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 19:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 19:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.146 (still bad) 2009-Apr-21 19:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 19:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 19:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.137 (still bad) 2009-Apr-21 19:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 19:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 19:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 19:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.137 (still bad) 2009-Apr-21 19:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 19:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 19:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 19:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.137 (still bad) 2009-Apr-21 19:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:34:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:34:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.913 0.919 0.920 1.072 2009-Apr-21 19:34:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.037 0.984 1.138 1.106 2009-Apr-21 19:34:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.900 0.953 0.931 0.991 2009-Apr-21 19:34:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.000 0.103 1.099 0.128 2009-Apr-21 19:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 19:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.148 (still bad) 2009-Apr-21 19:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:35:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:35:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 0.919 0.920 1.069 2009-Apr-21 19:35:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.038 0.984 1.139 1.106 2009-Apr-21 19:35:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.900 0.956 0.930 0.991 2009-Apr-21 19:35:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.999 0.103 1.100 0.127 2009-Apr-21 19:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.148 (still bad) 2009-Apr-21 19:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.147 (still bad) 2009-Apr-21 19:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.145 (still bad) 2009-Apr-21 19:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.146 (still bad) 2009-Apr-21 19:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.146 (still bad) 2009-Apr-21 19:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:36:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:36:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.913 0.920 0.922 1.070 2009-Apr-21 19:36:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.036 0.985 1.138 1.106 2009-Apr-21 19:36:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.903 0.959 0.934 0.991 2009-Apr-21 19:36:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.002 0.103 1.101 0.127 2009-Apr-21 19:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.146 (still bad) 2009-Apr-21 19:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.147 (still bad) 2009-Apr-21 19:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-21 19:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.139 (still bad) 2009-Apr-21 19:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.140 (still bad) 2009-Apr-21 19:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:37:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:37:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.915 0.925 0.921 1.069 2009-Apr-21 19:37:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.039 0.985 1.139 1.108 2009-Apr-21 19:37:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.902 0.957 0.934 0.993 2009-Apr-21 19:37:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.000 0.103 1.101 0.128 2009-Apr-21 19:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-21 19:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.147 (still bad) 2009-Apr-21 19:38:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:38:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.915 0.925 0.920 1.069 2009-Apr-21 19:38:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 0.991 1.148 1.115 2009-Apr-21 19:38:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.902 0.960 0.941 0.998 2009-Apr-21 19:38:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.000 0.103 1.102 0.127 2009-Apr-21 19:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.147 (still bad) 2009-Apr-21 19:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.153 (still bad) 2009-Apr-21 19:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.148 (still bad) 2009-Apr-21 19:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.147 (still bad) 2009-Apr-21 19:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.155 (still bad) 2009-Apr-21 19:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.147 (still bad) 2009-Apr-21 19:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 19:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.146 (still bad) 2009-Apr-21 19:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.146 (still bad) 2009-Apr-21 19:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 19:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.147 (still bad) 2009-Apr-21 19:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.147 (still bad) 2009-Apr-21 19:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.147 (still bad) 2009-Apr-21 19:39:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:39:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.916 0.923 0.922 1.070 2009-Apr-21 19:39:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.036 0.986 1.139 1.104 2009-Apr-21 19:39:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.898 0.953 0.945 1.000 2009-Apr-21 19:39:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.001 0.103 1.101 0.127 2009-Apr-21 19:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.147 (still bad) 2009-Apr-21 19:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 19:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.147 (still bad) 2009-Apr-21 19:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.146 (still bad) 2009-Apr-21 19:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:40:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:40:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.910 0.920 0.919 1.067 2009-Apr-21 19:40:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.037 0.985 1.139 1.108 2009-Apr-21 19:40:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.898 0.952 0.930 0.988 2009-Apr-21 19:40:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.000 0.103 1.101 0.127 2009-Apr-21 19:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.145 (still bad) 2009-Apr-21 19:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:41:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:41:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.912 0.923 0.922 1.067 2009-Apr-21 19:41:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.038 0.984 1.137 1.105 2009-Apr-21 19:41:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.901 0.956 0.934 0.988 2009-Apr-21 19:41:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.003 0.103 1.104 0.127 2009-Apr-21 19:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 19:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 19:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 19:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.146 (still bad) 2009-Apr-21 19:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.147 (still bad) 2009-Apr-21 19:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.146 (still bad) 2009-Apr-21 19:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:42:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:42:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.912 0.921 0.925 1.070 2009-Apr-21 19:42:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 0.988 1.140 1.107 2009-Apr-21 19:42:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.902 0.958 0.935 0.990 2009-Apr-21 19:42:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.004 0.103 1.106 0.128 2009-Apr-21 19:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 19:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 19:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.146 (still bad) 2009-Apr-21 19:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.146 (still bad) 2009-Apr-21 19:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.147 (still bad) 2009-Apr-21 19:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.147 (still bad) 2009-Apr-21 19:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:43:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:43:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 0.924 0.924 1.071 2009-Apr-21 19:43:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 0.985 1.140 1.105 2009-Apr-21 19:43:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.903 0.958 0.934 0.991 2009-Apr-21 19:43:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.002 0.103 1.102 0.128 2009-Apr-21 19:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.144 (still bad) 2009-Apr-21 19:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 19:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.145 (still bad) 2009-Apr-21 19:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.145 (still bad) 2009-Apr-21 19:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 19:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 19:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.145 (still bad) 2009-Apr-21 19:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.140 (still bad) 2009-Apr-21 19:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 19:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.147 (still bad) 2009-Apr-21 19:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.146 (still bad) 2009-Apr-21 19:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 19:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 19:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:44:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:44:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.912 0.922 0.922 1.070 2009-Apr-21 19:44:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.039 0.987 1.138 1.106 2009-Apr-21 19:44:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.902 0.958 0.934 0.990 2009-Apr-21 19:44:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.002 0.103 1.102 0.127 2009-Apr-21 19:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.148 (still bad) 2009-Apr-21 19:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.148 (still bad) 2009-Apr-21 19:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:45:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:45:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.918 0.931 0.933 1.076 2009-Apr-21 19:45:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.047 0.991 1.148 1.115 2009-Apr-21 19:45:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.907 0.963 0.938 0.997 2009-Apr-21 19:45:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 0.103 1.107 0.128 2009-Apr-21 19:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.148 (still bad) 2009-Apr-21 19:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.148 (still bad) 2009-Apr-21 19:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.149 (still bad) 2009-Apr-21 19:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.149 (still bad) 2009-Apr-21 19:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.146 (still bad) 2009-Apr-21 19:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.145 (still bad) 2009-Apr-21 19:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.145 (still bad) 2009-Apr-21 19:46:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:46:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.913 0.925 0.925 1.070 2009-Apr-21 19:46:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.047 0.993 1.154 1.121 2009-Apr-21 19:46:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.906 0.963 0.941 0.994 2009-Apr-21 19:46:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.002 0.103 1.103 0.128 2009-Apr-21 19:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.145 (still bad) 2009-Apr-21 19:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.145 (still bad) 2009-Apr-21 19:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.140 (still bad) 2009-Apr-21 19:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.140 (still bad) 2009-Apr-21 19:47:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:47:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.912 0.924 0.924 1.069 2009-Apr-21 19:47:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.039 0.986 1.140 1.108 2009-Apr-21 19:47:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.901 0.959 0.937 0.995 2009-Apr-21 19:47:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.001 0.103 1.103 0.128 2009-Apr-21 19:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.140 (still bad) 2009-Apr-21 19:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-21 19:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-21 19:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-21 19:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-21 19:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.141 (still bad) 2009-Apr-21 19:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.143 (still bad) 2009-Apr-21 19:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 19:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.145 (still bad) 2009-Apr-21 19:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 19:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.152 (still bad) 2009-Apr-21 19:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:48:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:48:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.912 0.925 0.922 1.070 2009-Apr-21 19:48:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.038 0.987 1.140 1.104 2009-Apr-21 19:48:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.902 0.959 0.936 0.989 2009-Apr-21 19:48:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.000 0.103 1.102 0.128 2009-Apr-21 19:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.150 (still bad) 2009-Apr-21 19:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.143 (still bad) 2009-Apr-21 19:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.149 (still bad) 2009-Apr-21 19:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.148 (still bad) 2009-Apr-21 19:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.149 (still bad) 2009-Apr-21 19:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.148 (still bad) 2009-Apr-21 19:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:49:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:49:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 0.925 0.926 1.077 2009-Apr-21 19:49:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.039 0.987 1.140 1.105 2009-Apr-21 19:49:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.900 0.958 0.933 0.991 2009-Apr-21 19:49:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.002 0.103 1.105 0.128 2009-Apr-21 19:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 19:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.150 (still bad) 2009-Apr-21 19:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 19:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.149 (still bad) 2009-Apr-21 19:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-21 19:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.145 (still bad) 2009-Apr-21 19:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 19:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.154 (still bad) 2009-Apr-21 19:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 19:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:50:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:50:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.910 0.926 0.924 1.072 2009-Apr-21 19:50:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.989 1.145 1.110 2009-Apr-21 19:50:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.902 0.962 0.936 0.991 2009-Apr-21 19:50:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.006 0.103 1.108 0.128 2009-Apr-21 19:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.150 (still bad) 2009-Apr-21 19:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.150 (still bad) 2009-Apr-21 19:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.148 (still bad) 2009-Apr-21 19:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 19:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.151 (still bad) 2009-Apr-21 19:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 19:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 19:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.148 (still bad) 2009-Apr-21 19:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:51:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:51:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.909 0.926 0.924 1.071 2009-Apr-21 19:51:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.047 0.994 1.142 1.110 2009-Apr-21 19:51:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.902 0.961 0.933 0.991 2009-Apr-21 19:51:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.002 0.103 1.105 0.127 2009-Apr-21 19:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 19:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.147 (still bad) 2009-Apr-21 19:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 19:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.146 (still bad) 2009-Apr-21 19:51:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:51:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-21 19:51:55 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2009-Apr-21 19:51:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-21 19:51:55 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-21 19:51:55 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Apr-21 19:51:55 LOG5 finish_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-21 19:51:55 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-Apr-21 19:51:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-21 19:51:55 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-Apr-21 19:51:55 LOG5 end_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-21 19:51:55 COMMAND run_command_line: EXECUTING command 12: 'ENDIF' 2009-Apr-21 19:51:55 COMMAND run_command_line: EXECUTING command 15: 'IF LSTSLEW(AGES3193_p2_086) < 092832 THEN' 2009-Apr-21 19:51:55 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_086) < 092832 2009-Apr-21 19:51:55 INFO5 is_if_valid: Condition parsed as: 9.4570029999999985 < 9.4755555555555553 2009-Apr-21 19:51:56 COMMAND run_command_line: EXECUTING command 16: 'FIXEDDRIFT az=239.18 alfaangle=-38.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_086 ra=95300.00 dec=214530.00' 2009-Apr-21 19:51:56 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-Apr-21 19:51:56 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-21 19:51:56 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 239.18 -38.3 hcorcal 5 tracking no first 1 AGES3193_p2_086 95300.00 214530.00 J 8500.0 Heliocentric velocity(optical)' 2009-Apr-21 19:51:56 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Apr-21 19:51:56 LOG5 begin_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-21 19:51:56 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_084' 2009-Apr-21 19:51:56 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Apr-21 19:51:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_086} 2009-Apr-21 19:51:56 INFO3 fixed_driftmap: Sending telescope to Az = 239.18 and ZA = 6.76 2009-Apr-21 19:51:56 LOG3 track_source: Calling 'track_source AGES3193_p2_086 239.18 6.7647199193 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Apr-21 19:51:56 START begin_task: Starting task 'sending tracking commands' 2009-Apr-21 19:51:56 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-21 19:51:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_086} INFO {Slewing to source 'AGES3193_p2_086' ...} 2009-Apr-21 19:51:56 INFO1 track_source: Starting to track AGES3193_p2_086 2009-Apr-21 19:51:56 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_086" 2009-Apr-21 19:51:56 LOG3 vw_send: To DATATAKING: set ra 239.18 2009-Apr-21 19:51:56 LOG3 vw_send: To DATATAKING: set dec 6.7647199193 2009-Apr-21 19:51:56 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-21 19:51:56 LOG3 vw_send: To DATATAKING: pnt tr 239.18 6.7647199193 -CF 2009-Apr-21 19:51:56 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 19:51:56 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-21 19:51:56 LOG5 finish_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-21 19:51:56 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-21 19:51:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 19:51:56 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-21 19:51:56 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-21 19:51:56 START begin_task: Starting task 'rotate ALFA to -38.3 degrees' 2009-Apr-21 19:51:56 LOG5 begin_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-21 19:51:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -38.3 degrees ...} 2009-Apr-21 19:51:56 INFO2 rotate_alfa: ALFA commanded to -38.3 degrees 2009-Apr-21 19:51:56 LOG3 sock_errsend: To ALFAMOTOR: POSITION -38.3 REPLY 2009-Apr-21 19:51:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-21 19:51:56 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-21 19:51:56 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2009-Apr-21 19:51:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_086" 2009-Apr-21 19:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 19:51:56 LOG4 got_cormsg: From DATATAKING: set ra 239.18 2009-Apr-21 19:51:56 LOG4 got_cormsg: From DATATAKING: set dec 6.7647199193 2009-Apr-21 19:51:56 LOG4 got_cormsg: From DATATAKING: vw% 239.18 2009-Apr-21 19:51:56 LOG4 got_cormsg: From DATATAKING: vw% 6.7647199193 2009-Apr-21 19:51:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:51:56 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-21 19:51:56 LOG4 got_cormsg: From DATATAKING: pnt tr 239.18 6.7647199193 -CF 2009-Apr-21 19:51:56 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 19:51:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-21 19:51:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:52:06 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-21 19:52:06 INFO3 alfa_motor: ALFA rotator in-position -38.30 degrees 2009-Apr-21 19:52:06 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-21 19:52:06 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2009-Apr-21 19:52:06 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-21 19:52:06 STOP finish_task: Finishing task 'rotate ALFA to -38.3 degrees' 2009-Apr-21 19:52:06 LOG5 finish_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-21 19:52:06 INFO2 finish_task: DONE finished configuration: rotating ALFA to -38.3 degrees 2009-Apr-21 19:52:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 19:52:06 STOP end_task: Finishing task 'rotate ALFA to -38.3 degrees' with status 'OK' 2009-Apr-21 19:52:06 LOG5 end_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-21 19:52:06 START begin_task: Starting task 'waiting on telescope' 2009-Apr-21 19:52:06 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2009-Apr-21 19:52:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-21 19:52:06 LOG3 waittrk: Start waittrk 5 2009-Apr-21 19:52:06 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-21 19:52:06 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-Apr-21 19:52:12 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-21 19:52:12 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-Apr-21 19:52:12 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-21 19:52:12 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2009-Apr-21 19:54:07 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-21 19:54:07 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2009-Apr-21 19:54:07 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-21 19:54:07 INFO2 waittrk: Now tracking AGES3193_p2_086 2009-Apr-21 19:54:07 LOG4 waittrk: Current telescope position: Az = 238.62 ZA = 6.77 2009-Apr-21 19:54:07 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-21 19:54:07 LOG5 finish_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2009-Apr-21 19:54:07 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-21 19:54:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 19:54:07 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-21 19:54:07 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2009-Apr-21 19:54:07 START begin_task: Starting task 'selecting calibration type' 2009-Apr-21 19:54:07 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-Apr-21 19:54:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-21 19:54:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-21 19:54:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 19:54:07 START begin_task: Starting task 'waiting on setcal' 2009-Apr-21 19:54:07 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2009-Apr-21 19:54:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-21 19:54:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 19:54:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:54:08 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-21 19:54:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-21 19:54:08 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2009-Apr-21 19:54:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-21 19:54:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-21 19:54:08 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-21 19:54:08 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-21 19:54:08 LOG5 begin_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-21 19:54:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:54:09 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-21 19:54:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-21 19:54:09 LOG5 end_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-21 19:54:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-21 19:54:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-21 19:54:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-21 19:54:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-21 19:54:09 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-21 19:54:09 LOG5 begin_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2009-Apr-21 19:54:09 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-21 19:54:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-21 19:54:09 LOG5 end_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2009-Apr-21 19:54:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-21 19:54:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-21 19:54:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-21 19:54:09 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-Apr-21 19:54:09 LOG5 dopset_later: Calling 'dopset_later 40.842830774464474' 2009-Apr-21 19:54:09 INFO3 dopset_later: Setting Doppler correction for 19:54:50 (40.8 seconds from now) 2009-Apr-21 19:54:09 LOG5 antvel: Calling 'antvel 239.180000 6.764720 F 40.842830774464474' 2009-Apr-21 19:54:09 LOG2 antvel: Transforming current Az = 239.18 ZA = 6.76 to apparent RA = 09:53:32.7 Dec = +21:42:50.0 2009-Apr-21 19:54:09 LOG2 antvel: Parameters to Doppler: Heliocentric 86090 2009 111 0.0 2009-Apr-21 19:54:09 INFO5 antvel: Computed antenna velocity: +27.13976 km/s 2009-Apr-21 19:54:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.139759491500001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-Apr-21 19:54:09 INFO4 dopset_gen: New sky frequencies: 1381.118398 1381.118398 1381.118398 1381.118398 1381.118398 1381.118398 1381.118398 1381.118398 1381.118398 2009-Apr-21 19:54:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.118398 sky0=1381.118398 sky1=1381.118398 sky2=1381.118398 sky3=1381.118398 sky4=1381.118398 sky5=1381.118398 sky6=1381.118398 sky7=1381.118398 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 19:54:09 LOG2 dopset_gen: Result from 'sky2syn': 1631.118398 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 19:54:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631118398.0} 2009-Apr-21 19:54:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:54:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-Apr-21 19:54:09 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-Apr-21 19:54:09 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:23.6 Dec = +21:45:28.4 2009-Apr-21 19:54:09 LOG3 track_source: Calling 'track_source AGES3193_p2_086 095223.6 214528.4 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Apr-21 19:54:09 START begin_task: Starting task 'sending tracking commands' 2009-Apr-21 19:54:09 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2009-Apr-21 19:54:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_086} INFO {Slewing to source 'AGES3193_p2_086' ...} 2009-Apr-21 19:54:09 INFO1 track_source: Starting to track AGES3193_p2_086 2009-Apr-21 19:54:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_086" 2009-Apr-21 19:54:09 LOG3 vw_send: To DATATAKING: set ra 095223.6 2009-Apr-21 19:54:09 LOG3 vw_send: To DATATAKING: set dec 214528.4 2009-Apr-21 19:54:09 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-21 19:54:09 LOG3 vw_send: To DATATAKING: pnt tr 095223.6 214528.4 -CJ 2009-Apr-21 19:54:09 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 19:54:10 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-21 19:54:10 LOG5 finish_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2009-Apr-21 19:54:10 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-21 19:54:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 19:54:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-21 19:54:10 LOG5 end_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2009-Apr-21 19:54:10 START begin_task: Starting task 'waiting on telescope' 2009-Apr-21 19:54:10 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-21 19:54:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-21 19:54:10 LOG3 waittrk: Start waittrk 5 2009-Apr-21 19:54:10 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-21 19:54:10 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-21 19:54:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631118398.0} 2009-Apr-21 19:54:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 19:54:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:54:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_086" 2009-Apr-21 19:54:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:54:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:54:10 LOG4 got_cormsg: From DATATAKING: set ra 095223.6 2009-Apr-21 19:54:10 LOG4 got_cormsg: From DATATAKING: set dec 214528.4 2009-Apr-21 19:54:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-21 19:54:10 LOG4 got_cormsg: From DATATAKING: pnt tr 095223.6 214528.4 -CJ 2009-Apr-21 19:54:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 19:54:10 LOG4 got_cormsg: From DATATAKING: 095223.6 2009-Apr-21 19:54:10 LOG4 got_cormsg: From DATATAKING: vw% 214528.4 2009-Apr-21 19:54:10 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2009-Apr-21 19:54:15 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-21 19:54:15 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-21 19:54:15 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-21 19:54:15 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2009-Apr-21 19:54:18 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-21 19:54:18 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2009-Apr-21 19:54:18 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-21 19:54:18 INFO2 waittrk: Now tracking AGES3193_p2_086 2009-Apr-21 19:54:18 LOG4 waittrk: Current telescope position: Az = 238.56 ZA = 6.75 2009-Apr-21 19:54:18 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-21 19:54:18 LOG5 finish_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-21 19:54:18 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-21 19:54:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 19:54:18 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-21 19:54:18 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-21 19:54:18 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-21 19:54:18 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2009-Apr-21 19:54:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-21 19:54:18 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-21 19:54:18 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-21 19:54:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-21 19:54:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 19:54:18 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-21 19:54:18 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2009-Apr-21 19:54:18 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-21 19:54:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 19:54:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:54:21 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-21 19:54:21 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-21 19:54:21 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2009-Apr-21 19:54:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-21 19:54:21 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-21 19:54:21 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2009-Apr-21 19:54:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-21 19:54:21 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-21 19:54:21 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-21 19:54:21 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-21 19:54:21 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-21 19:54:21 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-21 19:54:21 LOG5 begin_task: Level: (5) ID = <10153> Status = 0 0 0 0 ok 2009-Apr-21 19:54:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-21 19:54:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:54:21 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 7 6 dB 2009-Apr-21 19:54:21 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-21 19:54:21 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 4 3 dB 2009-Apr-21 19:54:22 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-21 19:54:22 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-21 19:54:22 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-21 19:54:22 LOG5 end_task: Level: (5) ID = <10153> Status = 0 0 0 0 ok 2009-Apr-21 19:54:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.104 0.902 ALFA beam 1: 0.896 1.051 2009-Apr-21 19:54:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.020 0.970 ALFA beam 3: 1.122 1.076 2009-Apr-21 19:54:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.895 0.927 ALFA beam 5: 1.121 0.938 2009-Apr-21 19:54:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.958 0.102 ALFA beam 7: 1.056 0.126 2009-Apr-21 19:54:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-21 19:54:22 LOG5 finish_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2009-Apr-21 19:54:22 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-21 19:54:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 19:54:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-21 19:54:22 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2009-Apr-21 19:54:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-21 19:54:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-21 19:54:22 LOG5 finish_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2009-Apr-21 19:54:22 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-21 19:54:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 19:54:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-21 19:54:22 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2009-Apr-21 19:54:22 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-Apr-21 19:54:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-Apr-21 19:54:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-Apr-21 19:54:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-Apr-21 19:54:22 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-Apr-21 19:54:22 START begin_task: Starting task 'WAPP calibration' 2009-Apr-21 19:54:22 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2009-Apr-21 19:54:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-21 19:54:22 START begin_task: Starting task 'selecting calibration type' 2009-Apr-21 19:54:22 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-21 19:54:22 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-21 19:54:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-21 19:54:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 19:54:22 START begin_task: Starting task 'waiting on setcal' 2009-Apr-21 19:54:22 LOG5 begin_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2009-Apr-21 19:54:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-Apr-21 19:54:22 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-21 19:54:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 19:54:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:54:22 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-21 19:54:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-21 19:54:22 LOG5 end_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2009-Apr-21 19:54:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-21 19:54:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-21 19:54:22 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-21 19:54:22 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-21 19:54:22 LOG5 begin_task: Level: (5) ID = <10157> Status = 0 0 0 0 ok 2009-Apr-21 19:54:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:54:22 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-21 19:54:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-21 19:54:22 LOG5 end_task: Level: (5) ID = <10157> Status = 0 0 0 0 ok 2009-Apr-21 19:54:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-21 19:54:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-21 19:54:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-21 19:54:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-21 19:54:22 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-21 19:54:22 LOG5 begin_task: Level: (5) ID = <10158> Status = 0 0 0 0 ok 2009-Apr-21 19:54:23 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-21 19:54:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-21 19:54:23 LOG5 end_task: Level: (5) ID = <10158> Status = 0 0 0 0 ok 2009-Apr-21 19:54:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-21 19:54:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-21 19:54:23 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-21 19:54:23 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-21 19:54:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-21 19:54:23 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-21 19:54:23 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-21 19:54:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-21 19:54:23 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-21 19:54:23 NOTE WAPPDATA-new_file: New FITS file: wapp.20090421.a2048.0002.fits 2009-Apr-21 19:54:23 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-21 19:54:23 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090421.a2048.0002.fits} 2009-Apr-21 19:54:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-21 19:54:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-21 19:54:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-21 19:54:23 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-21 19:54:23 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-21 19:54:23 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-Apr-21 19:54:23 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-21 19:54:23 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2009-Apr-21 19:54:23 LOG5 log_alfabeam: Parameters: 9.8732222222222248 21.757888888888886 9.467948 2009.3061722691207 -38.300076 2009-Apr-21 19:54:23 LOG4 log_alfabeam: ALFABEAM 0 9.873222222222221 21.757888888888886 2009-Apr-21 19:54:23 LOG4 log_alfabeam: ALFABEAM 1 9.873636541014822 21.664653888619615 2009-Apr-21 19:54:23 LOG4 log_alfabeam: ALFABEAM 2 9.879862938111650 21.726176137169727 2009-Apr-21 19:54:23 LOG4 log_alfabeam: ALFABEAM 3 9.879393858337059 21.820567174791307 2009-Apr-21 19:54:23 LOG4 log_alfabeam: ALFABEAM 4 9.872705908947104 21.851475946673755 2009-Apr-21 19:54:23 LOG4 log_alfabeam: ALFABEAM 5 9.866579442895070 21.787946272421266 2009-Apr-21 19:54:23 LOG4 log_alfabeam: ALFABEAM 6 9.867040068165302 21.695507301758447 2009-Apr-21 19:54:23 INFO2 take_data: Starting WAPP scan: 911100240 2009-Apr-21 19:54:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Apr-21 19:54:23 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-21 19:54:23 LOG5 begin_task: Level: (5) ID = <10161> Status = 0 0 0 0 ok 2009-Apr-21 19:54:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:54:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-21 19:54:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 0.902 0.896 1.051 2009-Apr-21 19:54:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.970 1.122 1.076 2009-Apr-21 19:54:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.895 0.927 1.121 0.938 2009-Apr-21 19:54:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.958 0.102 1.056 0.126 2009-Apr-21 19:54:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86064.00 2009-Apr-21 19:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.118398 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.118398 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.118398 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.118398 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.118398 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.118398 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.118398 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.118398 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.118398 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.559 (still bad) 2009-Apr-21 19:54:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:54:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-21 19:54:29 LOG5 end_task: Level: (5) ID = <10161> Status = 0 0 0 0 ok 2009-Apr-21 19:54:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-21 19:54:29 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2009-Apr-21 19:54:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-21 19:54:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-21 19:54:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-21 19:54:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-21 19:54:29 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Apr-21 19:54:29 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-21 19:54:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-21 19:54:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-21 19:54:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-21 19:54:29 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Apr-21 19:54:29 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-Apr-21 19:54:29 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-Apr-21 19:54:29 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-21 19:54:29 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2009-Apr-21 19:54:29 LOG5 log_alfabeam: Parameters: 9.8732222222222248 21.757888888888886 9.469898 2009.3061724909371 -38.300076 2009-Apr-21 19:54:29 LOG4 log_alfabeam: ALFABEAM 0 9.873222222222216 21.757888888888886 2009-Apr-21 19:54:29 LOG4 log_alfabeam: ALFABEAM 1 9.873650639768091 21.664667075404022 2009-Apr-21 19:54:29 LOG4 log_alfabeam: ALFABEAM 2 9.879867786597952 21.726370883141708 2009-Apr-21 19:54:29 LOG4 log_alfabeam: ALFABEAM 3 9.879384209084295 21.820751234710322 2009-Apr-21 19:54:29 LOG4 log_alfabeam: ALFABEAM 4 9.872691374776897 21.851460975227099 2009-Apr-21 19:54:29 LOG4 log_alfabeam: ALFABEAM 5 9.866574858958893 21.787745757255426 2009-Apr-21 19:54:29 LOG4 log_alfabeam: ALFABEAM 6 9.867049614386369 21.695324173293777 2009-Apr-21 19:54:29 INFO2 take_data: Starting WAPP scan: 911100241 2009-Apr-21 19:54:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Apr-21 19:54:30 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-21 19:54:30 LOG5 begin_task: Level: (5) ID = <10164> Status = 0 0 0 0 ok 2009-Apr-21 19:54:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:54:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86071.00 2009-Apr-21 19:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.559 (still bad) 2009-Apr-21 19:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.118398 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.118398 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.118398 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.118398 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.118398 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.118398 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.118398 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.118398 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:54:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.118398 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:54:36 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-Apr-21 19:54:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 19:54:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-21 19:54:36 LOG5 end_task: Level: (5) ID = <10164> Status = 0 0 0 0 ok 2009-Apr-21 19:54:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-21 19:54:36 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2009-Apr-21 19:54:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-21 19:54:36 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-21 19:54:36 LOG5 finish_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2009-Apr-21 19:54:36 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-21 19:54:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 19:54:36 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-21 19:54:36 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2009-Apr-21 19:54:36 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-Apr-21 19:54:36 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 239.18 and ZA = 6.76 2009-Apr-21 19:54:36 LOG3 track_source: Calling 'track_source AGES3193_p2_086 239.18 6.7647199193 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Apr-21 19:54:36 START begin_task: Starting task 'sending tracking commands' 2009-Apr-21 19:54:36 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Apr-21 19:54:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_086} INFO {Slewing to source 'AGES3193_p2_086' ...} 2009-Apr-21 19:54:36 INFO1 track_source: Starting to track AGES3193_p2_086 2009-Apr-21 19:54:36 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_086" 2009-Apr-21 19:54:36 LOG3 vw_send: To DATATAKING: set ra 239.18 2009-Apr-21 19:54:36 LOG3 vw_send: To DATATAKING: set dec 6.7647199193 2009-Apr-21 19:54:36 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-21 19:54:36 LOG3 vw_send: To DATATAKING: pnt tr 239.18 6.7647199193 -CF 2009-Apr-21 19:54:36 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 19:54:36 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-21 19:54:36 LOG5 finish_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Apr-21 19:54:36 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-21 19:54:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 19:54:37 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-21 19:54:37 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Apr-21 19:54:37 LOG1 fixed_driftmap: Parameters: HA = -00:25:00.2 Start = 09:28:32.5 LST = 09:28:18.7 diff = 13.9 secs 2009-Apr-21 19:54:37 INFO2 fixed_driftmap: Waiting 11.9 seconds for RA 9:53:33 2009-Apr-21 19:54:37 INFO2 lstwait: Waiting for 11.8 secs from LST 09:28:19 to LST 09:28:31 ... 2009-Apr-21 19:54:37 LOG4 send_obs_status: To obs_status: <1> TASKTIME 11.846618792708549 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Apr-21 19:54:37 START begin_task: Starting task 'waiting on wait on LST' 2009-Apr-21 19:54:37 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2009-Apr-21 19:54:37 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_086" 2009-Apr-21 19:54:37 LOG4 got_cormsg: From DATATAKING: set ra 239.18 2009-Apr-21 19:54:37 LOG4 got_cormsg: From DATATAKING: set dec 6.7647199193 2009-Apr-21 19:54:37 LOG4 got_cormsg: From DATATAKING: vw% 239.18 2009-Apr-21 19:54:37 LOG4 got_cormsg: From DATATAKING: vw% 6.7647199193 2009-Apr-21 19:54:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:54:37 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-21 19:54:37 LOG4 got_cormsg: From DATATAKING: pnt tr 239.18 6.7647199193 -CF 2009-Apr-21 19:54:37 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 19:54:37 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-21 19:54:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 19:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.123 (still bad) 2009-Apr-21 19:54:48 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Apr-21 19:54:48 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2009-Apr-21 19:54:49 LOG4 lstwait: Finished waiting 0.15 seconds late 2009-Apr-21 19:54:49 INFO3 lstwait: Finished waiting 2009-Apr-21 19:54:49 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-21 19:54:49 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-Apr-21 19:54:49 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-21 19:54:49 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-Apr-21 19:54:49 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-21 19:54:49 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-Apr-21 19:54:49 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-21 19:54:49 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-Apr-21 19:54:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-21 19:54:49 INFO2 take_data: Starting WAPP scan: 911100242 2009-Apr-21 19:54:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-Apr-21 19:54:49 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-21 19:54:49 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2009-Apr-21 19:54:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 19:54:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86090.00 2009-Apr-21 19:54:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.118398 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 19:54:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.118398 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:54:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.118398 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 19:54:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.118398 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 19:54:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.118398 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 19:54:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.118398 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 19:54:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.118398 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 19:54:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.118398 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 19:54:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.118398 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 19:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.124 (still bad) 2009-Apr-21 19:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2009-Apr-21 19:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 19:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2009-Apr-21 19:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.126 (still bad) 2009-Apr-21 19:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.126 (still bad) 2009-Apr-21 19:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.127 (still bad) 2009-Apr-21 19:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2009-Apr-21 19:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 19:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2009-Apr-21 19:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.128 (still bad) 2009-Apr-21 19:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-21 19:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.128 (still bad) 2009-Apr-21 19:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.129 (still bad) 2009-Apr-21 19:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 19:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-21 19:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.127 (still bad) 2009-Apr-21 19:55:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:55:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.127 0.902 0.897 1.055 2009-Apr-21 19:55:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 0.971 1.124 1.080 2009-Apr-21 19:55:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.893 0.926 1.121 0.936 2009-Apr-21 19:55:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.970 0.103 1.070 0.127 2009-Apr-21 19:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.128 (still bad) 2009-Apr-21 19:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.129 (still bad) 2009-Apr-21 19:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-21 19:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2009-Apr-21 19:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.128 (still bad) 2009-Apr-21 19:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-21 19:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-21 19:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.127 (still bad) 2009-Apr-21 19:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.127 (still bad) 2009-Apr-21 19:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2009-Apr-21 19:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2009-Apr-21 19:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.125 (still bad) 2009-Apr-21 19:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.126 (still bad) 2009-Apr-21 19:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-21 19:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-21 19:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.127 (still bad) 2009-Apr-21 19:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-21 19:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.125 (still bad) 2009-Apr-21 19:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.126 (still bad) 2009-Apr-21 19:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-21 19:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-21 19:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-21 19:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-21 19:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.126 (still bad) 2009-Apr-21 19:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:56:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:56:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.127 0.902 0.898 1.057 2009-Apr-21 19:56:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.975 1.125 1.077 2009-Apr-21 19:56:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.893 0.926 1.123 0.937 2009-Apr-21 19:56:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.969 0.103 1.068 0.127 2009-Apr-21 19:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-21 19:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 19:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-21 19:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-21 19:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-21 19:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 19:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-21 19:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-21 19:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 19:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-21 19:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 19:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 19:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 19:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 19:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-21 19:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-21 19:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-21 19:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 19:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.127 (still bad) 2009-Apr-21 19:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-21 19:57:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:57:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.128 0.904 0.899 1.057 2009-Apr-21 19:57:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.974 1.125 1.082 2009-Apr-21 19:57:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.894 0.927 1.127 0.940 2009-Apr-21 19:57:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.972 0.103 1.069 0.127 2009-Apr-21 19:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 19:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-21 19:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.126 (still bad) 2009-Apr-21 19:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.127 (still bad) 2009-Apr-21 19:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-21 19:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 19:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-21 19:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-21 19:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-21 19:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-21 19:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 19:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 19:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-21 19:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 19:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 19:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-21 19:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 19:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.127 (still bad) 2009-Apr-21 19:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.127 (still bad) 2009-Apr-21 19:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-21 19:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-21 19:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-21 19:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 19:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 19:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-21 19:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 19:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-21 19:58:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:58:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.131 0.904 0.899 1.055 2009-Apr-21 19:58:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.974 1.127 1.080 2009-Apr-21 19:58:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.894 0.928 1.125 0.943 2009-Apr-21 19:58:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.972 0.103 1.070 0.127 2009-Apr-21 19:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 19:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-21 19:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 19:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 19:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 19:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 19:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 19:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 19:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 19:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 19:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 19:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 19:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-21 19:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 19:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 19:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 19:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 19:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-21 19:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 19:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-21 19:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 19:59:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 19:59:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.140 0.910 0.905 1.063 2009-Apr-21 19:59:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.021 0.975 1.128 1.082 2009-Apr-21 19:59:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.902 0.934 1.131 0.946 2009-Apr-21 19:59:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.979 0.103 1.077 0.127 2009-Apr-21 19:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 19:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-21 19:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 19:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 19:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 19:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 19:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 19:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 19:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 19:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 19:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 20:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 20:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 20:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 20:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 20:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 20:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 20:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 20:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 20:00:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 20:00:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.144 0.910 0.905 1.066 2009-Apr-21 20:00:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.028 0.980 1.147 1.099 2009-Apr-21 20:00:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.896 0.931 1.127 0.942 2009-Apr-21 20:00:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.980 0.103 1.076 0.127 2009-Apr-21 20:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 20:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 20:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 20:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 20:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 20:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 20:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 20:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 20:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.150 (still bad) 2009-Apr-21 20:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 20:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.145 (still bad) 2009-Apr-21 20:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.149 (still bad) 2009-Apr-21 20:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.146 (still bad) 2009-Apr-21 20:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.145 (still bad) 2009-Apr-21 20:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.149 (still bad) 2009-Apr-21 20:01:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 20:01:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.138 0.910 0.899 1.054 2009-Apr-21 20:01:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.017 0.974 1.138 1.090 2009-Apr-21 20:01:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.899 0.935 1.135 0.947 2009-Apr-21 20:01:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.974 0.103 1.072 0.127 2009-Apr-21 20:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.145 (still bad) 2009-Apr-21 20:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 20:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 20:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 20:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-21 20:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 20:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:02:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 20:02:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.132 0.905 0.899 1.057 2009-Apr-21 20:02:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.974 1.127 1.078 2009-Apr-21 20:02:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.893 0.927 1.126 0.942 2009-Apr-21 20:02:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.973 0.103 1.071 0.127 2009-Apr-21 20:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 20:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 20:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.130 (still bad) 2009-Apr-21 20:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 20:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.143 (still bad) 2009-Apr-21 20:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 20:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.139 (still bad) 2009-Apr-21 20:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 20:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 20:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 20:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.142 (still bad) 2009-Apr-21 20:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 20:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 20:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 20:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.143 (still bad) 2009-Apr-21 20:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:03:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 20:03:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.135 0.905 0.900 1.057 2009-Apr-21 20:03:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.024 0.975 1.129 1.080 2009-Apr-21 20:03:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.894 0.926 1.126 0.940 2009-Apr-21 20:03:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.972 0.103 1.071 0.127 2009-Apr-21 20:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 20:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 20:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.145 (still bad) 2009-Apr-21 20:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.143 (still bad) 2009-Apr-21 20:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 20:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 20:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:04:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 20:04:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.135 0.906 0.900 1.058 2009-Apr-21 20:04:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.025 0.975 1.129 1.079 2009-Apr-21 20:04:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.894 0.924 1.127 0.942 2009-Apr-21 20:04:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.975 0.103 1.072 0.127 2009-Apr-21 20:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 20:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 20:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 20:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 20:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 20:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 20:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 20:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 20:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 20:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.139 (still bad) 2009-Apr-21 20:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 20:05:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 20:05:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.137 0.908 0.899 1.056 2009-Apr-21 20:05:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.022 0.974 1.128 1.079 2009-Apr-21 20:05:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.892 0.925 1.125 0.940 2009-Apr-21 20:05:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.975 0.103 1.073 0.128 2009-Apr-21 20:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 20:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.147 (still bad) 2009-Apr-21 20:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 20:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.139 (still bad) 2009-Apr-21 20:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.139 (still bad) 2009-Apr-21 20:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 20:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 20:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 20:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:06:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 20:06:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.133 0.903 0.899 1.056 2009-Apr-21 20:06:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 0.974 1.130 1.080 2009-Apr-21 20:06:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.892 0.924 1.126 0.937 2009-Apr-21 20:06:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.976 0.103 1.074 0.127 2009-Apr-21 20:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.140 (still bad) 2009-Apr-21 20:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 20:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 20:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 20:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 20:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 20:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 20:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:07:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 20:07:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.133 0.905 0.899 1.055 2009-Apr-21 20:07:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.027 0.978 1.130 1.080 2009-Apr-21 20:07:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.893 0.924 1.124 0.939 2009-Apr-21 20:07:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.975 0.103 1.074 0.128 2009-Apr-21 20:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.135 (still bad) 2009-Apr-21 20:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 20:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 20:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 20:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 20:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 20:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.145 (still bad) 2009-Apr-21 20:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.147 (still bad) 2009-Apr-21 20:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.145 (still bad) 2009-Apr-21 20:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 20:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 20:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:08:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 20:08:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.139 0.907 0.902 1.059 2009-Apr-21 20:08:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 0.974 1.131 1.084 2009-Apr-21 20:08:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.894 0.926 1.128 0.941 2009-Apr-21 20:08:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 0.103 1.086 0.128 2009-Apr-21 20:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.138 (still bad) 2009-Apr-21 20:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.137 (still bad) 2009-Apr-21 20:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.137 (still bad) 2009-Apr-21 20:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 20:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 20:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.145 (still bad) 2009-Apr-21 20:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 20:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 20:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:09:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-21 20:09:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.146 0.914 0.907 1.065 2009-Apr-21 20:09:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.025 0.975 1.140 1.089 2009-Apr-21 20:09:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.899 0.933 1.132 0.945 2009-Apr-21 20:09:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.981 0.104 1.081 0.128 2009-Apr-21 20:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 20:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.145 (still bad) 2009-Apr-21 20:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 20:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 20:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.146 (still bad) 2009-Apr-21 20:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.143 (still bad) 2009-Apr-21 20:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.145 (still bad) 2009-Apr-21 20:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:10:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 20:10:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.145 0.914 0.906 1.065 2009-Apr-21 20:10:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.023 0.975 1.132 1.080 2009-Apr-21 20:10:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.892 0.923 1.129 0.939 2009-Apr-21 20:10:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.977 0.103 1.075 0.128 2009-Apr-21 20:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.146 (still bad) 2009-Apr-21 20:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 20:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 20:11:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 20:11:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.134 0.909 0.903 1.059 2009-Apr-21 20:11:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.026 0.976 1.131 1.084 2009-Apr-21 20:11:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.892 0.922 1.127 0.939 2009-Apr-21 20:11:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.978 0.103 1.077 0.127 2009-Apr-21 20:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 20:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.137 (still bad) 2009-Apr-21 20:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.143 (still bad) 2009-Apr-21 20:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 20:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 20:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 20:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 20:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 20:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.145 (still bad) 2009-Apr-21 20:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 20:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:12:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 20:12:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.133 0.907 0.900 1.056 2009-Apr-21 20:12:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.025 0.980 1.127 1.085 2009-Apr-21 20:12:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.891 0.923 1.127 0.941 2009-Apr-21 20:12:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.985 0.103 1.084 0.128 2009-Apr-21 20:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 20:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.136 (still bad) 2009-Apr-21 20:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 20:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 20:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 20:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 20:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.141 (still bad) 2009-Apr-21 20:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 20:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 20:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.139 (still bad) 2009-Apr-21 20:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 20:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 20:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:13:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 20:13:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.133 0.908 0.901 1.055 2009-Apr-21 20:13:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.022 0.973 1.130 1.082 2009-Apr-21 20:13:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.891 0.925 1.124 0.938 2009-Apr-21 20:13:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.983 0.103 1.080 0.127 2009-Apr-21 20:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 20:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.132 (still bad) 2009-Apr-21 20:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 20:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.134 (still bad) 2009-Apr-21 20:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 20:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.142 (still bad) 2009-Apr-21 20:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 20:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.150 (still bad) 2009-Apr-21 20:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.161 (still bad) 2009-Apr-21 20:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.155 (still bad) 2009-Apr-21 20:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.154 (still bad) 2009-Apr-21 20:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.154 (still bad) 2009-Apr-21 20:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.149 (still bad) 2009-Apr-21 20:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.146 (still bad) 2009-Apr-21 20:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.149 (still bad) 2009-Apr-21 20:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.138 (still bad) 2009-Apr-21 20:14:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 20:14:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.133 0.910 0.904 1.061 2009-Apr-21 20:14:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.030 0.982 1.134 1.086 2009-Apr-21 20:14:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.894 0.925 1.125 0.940 2009-Apr-21 20:14:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.975 0.103 1.072 0.127 2009-Apr-21 20:14:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 20:14:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-21 20:14:50 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2009-Apr-21 20:14:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-21 20:14:50 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-Apr-21 20:14:50 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Apr-21 20:14:50 LOG5 finish_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-21 20:14:50 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-Apr-21 20:14:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-21 20:14:50 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-Apr-21 20:14:50 LOG5 end_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-21 20:14:50 COMMAND run_command_line: EXECUTING command 19: 'ENDIF' 2009-Apr-21 20:14:50 COMMAND run_command_line: EXECUTING command 22: 'IF LSTSLEW(AGES3193_p2_088) < 095132 THEN' 2009-Apr-21 20:14:50 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_088) < 095132 2009-Apr-21 20:14:51 INFO5 is_if_valid: Condition parsed as: 9.8366596666666677 < 9.8588888888888881 2009-Apr-21 20:14:51 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=187.99 alfaangle=12.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_088 ra=95300.00 dec=214230.00' 2009-Apr-21 20:14:51 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-Apr-21 20:14:51 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-21 20:14:51 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 187.99 12.1 hcorcal 5 tracking no first 1 AGES3193_p2_088 95300.00 214230.00 J 8500.0 Heliocentric velocity(optical)' 2009-Apr-21 20:14:51 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Apr-21 20:14:51 LOG5 begin_task: Level: (2) ID = <10169> Status = 0 0 0 0 ok 2009-Apr-21 20:14:51 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_086' 2009-Apr-21 20:14:51 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Apr-21 20:14:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_088} 2009-Apr-21 20:14:51 INFO3 fixed_driftmap: Sending telescope to Az = 187.99 and ZA = 3.34 2009-Apr-21 20:14:51 LOG3 track_source: Calling 'track_source AGES3193_p2_088 187.99 3.3432041779 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Apr-21 20:14:51 START begin_task: Starting task 'sending tracking commands' 2009-Apr-21 20:14:51 LOG5 begin_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2009-Apr-21 20:14:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_088} INFO {Slewing to source 'AGES3193_p2_088' ...} 2009-Apr-21 20:14:51 INFO1 track_source: Starting to track AGES3193_p2_088 2009-Apr-21 20:14:51 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_088" 2009-Apr-21 20:14:51 LOG3 vw_send: To DATATAKING: set ra 187.99 2009-Apr-21 20:14:51 LOG3 vw_send: To DATATAKING: set dec 3.3432041779 2009-Apr-21 20:14:51 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-21 20:14:51 LOG3 vw_send: To DATATAKING: pnt tr 187.99 3.3432041779 -CF 2009-Apr-21 20:14:51 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 20:14:51 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-21 20:14:51 LOG5 finish_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2009-Apr-21 20:14:51 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-21 20:14:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 20:14:51 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-21 20:14:51 LOG5 end_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2009-Apr-21 20:14:51 START begin_task: Starting task 'rotate ALFA to +12.1 degrees' 2009-Apr-21 20:14:51 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2009-Apr-21 20:14:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +12.1 degrees ...} 2009-Apr-21 20:14:51 INFO2 rotate_alfa: ALFA commanded to +12.1 degrees 2009-Apr-21 20:14:51 LOG3 sock_errsend: To ALFAMOTOR: POSITION 12.1 REPLY 2009-Apr-21 20:14:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-21 20:14:51 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-21 20:14:51 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2009-Apr-21 20:14:51 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_088" 2009-Apr-21 20:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.135 (still bad) 2009-Apr-21 20:14:51 LOG4 got_cormsg: From DATATAKING: set ra 187.99 2009-Apr-21 20:14:51 LOG4 got_cormsg: From DATATAKING: set dec 3.3432041779 2009-Apr-21 20:14:51 LOG4 got_cormsg: From DATATAKING: vw% 187.99 2009-Apr-21 20:14:51 LOG4 got_cormsg: From DATATAKING: vw% 3.3432041779 2009-Apr-21 20:14:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:14:51 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-21 20:14:51 LOG4 got_cormsg: From DATATAKING: pnt tr 187.99 3.3432041779 -CF 2009-Apr-21 20:14:51 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 20:14:51 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-21 20:14:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:15:20 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-21 20:15:20 INFO3 alfa_motor: ALFA rotator in-position +12.10 degrees 2009-Apr-21 20:15:20 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-21 20:15:20 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2009-Apr-21 20:15:20 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-21 20:15:20 STOP finish_task: Finishing task 'rotate ALFA to +12.1 degrees' 2009-Apr-21 20:15:20 LOG5 finish_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2009-Apr-21 20:15:20 INFO2 finish_task: DONE finished configuration: rotating ALFA to +12.1 degrees 2009-Apr-21 20:15:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 20:15:20 STOP end_task: Finishing task 'rotate ALFA to +12.1 degrees' with status 'OK' 2009-Apr-21 20:15:20 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2009-Apr-21 20:15:20 START begin_task: Starting task 'waiting on telescope' 2009-Apr-21 20:15:20 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2009-Apr-21 20:15:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-21 20:15:20 LOG3 waittrk: Start waittrk 5 2009-Apr-21 20:15:20 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-21 20:15:20 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2009-Apr-21 20:15:25 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-21 20:15:25 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2009-Apr-21 20:15:25 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-21 20:15:25 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2009-Apr-21 20:17:05 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-21 20:17:05 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2009-Apr-21 20:17:05 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-21 20:17:05 INFO2 waittrk: Now tracking AGES3193_p2_088 2009-Apr-21 20:17:06 LOG4 waittrk: Current telescope position: Az = 187.70 ZA = 3.36 2009-Apr-21 20:17:06 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-21 20:17:06 LOG5 finish_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2009-Apr-21 20:17:06 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-21 20:17:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 20:17:06 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-21 20:17:06 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2009-Apr-21 20:17:06 START begin_task: Starting task 'selecting calibration type' 2009-Apr-21 20:17:06 LOG5 begin_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2009-Apr-21 20:17:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-21 20:17:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-21 20:17:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 20:17:06 START begin_task: Starting task 'waiting on setcal' 2009-Apr-21 20:17:06 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2009-Apr-21 20:17:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-21 20:17:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 20:17:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:17:07 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-21 20:17:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-21 20:17:07 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2009-Apr-21 20:17:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-21 20:17:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-21 20:17:07 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-21 20:17:07 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-21 20:17:07 LOG5 begin_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2009-Apr-21 20:17:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:17:07 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-21 20:17:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-21 20:17:07 LOG5 end_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2009-Apr-21 20:17:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-21 20:17:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-21 20:17:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-21 20:17:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-21 20:17:07 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-21 20:17:07 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2009-Apr-21 20:17:07 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-21 20:17:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-21 20:17:07 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2009-Apr-21 20:17:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-21 20:17:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-21 20:17:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-21 20:17:07 LOG5 end_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2009-Apr-21 20:17:07 LOG5 dopset_later: Calling 'dopset_later 39.364238057231262' 2009-Apr-21 20:17:07 INFO3 dopset_later: Setting Doppler correction for 20:17:46 (39.4 seconds from now) 2009-Apr-21 20:17:07 LOG5 antvel: Calling 'antvel 187.990000 3.343204 F 39.364238057231262' 2009-Apr-21 20:17:07 LOG2 antvel: Transforming current Az = 187.99 ZA = 3.34 to apparent RA = 09:53:32.7 Dec = +21:39:50.0 2009-Apr-21 20:17:07 LOG2 antvel: Parameters to Doppler: Heliocentric 87466 2009 111 0.0 2009-Apr-21 20:17:07 INFO5 antvel: Computed antenna velocity: +27.18371 km/s 2009-Apr-21 20:17:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.183707611100001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-Apr-21 20:17:07 INFO4 dopset_gen: New sky frequencies: 1381.118196 1381.118196 1381.118196 1381.118196 1381.118196 1381.118196 1381.118196 1381.118196 1381.118196 2009-Apr-21 20:17:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.118196 sky0=1381.118196 sky1=1381.118196 sky2=1381.118196 sky3=1381.118196 sky4=1381.118196 sky5=1381.118196 sky6=1381.118196 sky7=1381.118196 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 20:17:07 LOG2 dopset_gen: Result from 'sky2syn': 1631.118196 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 20:17:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631118196.0} 2009-Apr-21 20:17:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 20:17:07 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-Apr-21 20:17:07 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-Apr-21 20:17:07 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:25.1 Dec = +21:42:28.4 2009-Apr-21 20:17:07 LOG3 track_source: Calling 'track_source AGES3193_p2_088 095225.1 214228.4 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Apr-21 20:17:07 START begin_task: Starting task 'sending tracking commands' 2009-Apr-21 20:17:07 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2009-Apr-21 20:17:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_088} INFO {Slewing to source 'AGES3193_p2_088' ...} 2009-Apr-21 20:17:07 INFO1 track_source: Starting to track AGES3193_p2_088 2009-Apr-21 20:17:07 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_088" 2009-Apr-21 20:17:07 LOG3 vw_send: To DATATAKING: set ra 095225.1 2009-Apr-21 20:17:07 LOG3 vw_send: To DATATAKING: set dec 214228.4 2009-Apr-21 20:17:08 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-21 20:17:08 LOG3 vw_send: To DATATAKING: pnt tr 095225.1 214228.4 -CJ 2009-Apr-21 20:17:08 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 20:17:08 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-21 20:17:08 LOG5 finish_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2009-Apr-21 20:17:08 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-21 20:17:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 20:17:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-21 20:17:08 LOG5 end_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2009-Apr-21 20:17:08 START begin_task: Starting task 'waiting on telescope' 2009-Apr-21 20:17:08 LOG5 begin_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2009-Apr-21 20:17:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-21 20:17:08 LOG3 waittrk: Start waittrk 5 2009-Apr-21 20:17:08 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-21 20:17:08 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2009-Apr-21 20:17:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631118196.0} 2009-Apr-21 20:17:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 20:17:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:17:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_088" 2009-Apr-21 20:17:08 LOG4 got_cormsg: From DATATAKING: set ra 095225.1 2009-Apr-21 20:17:08 LOG4 got_cormsg: From DATATAKING: set dec 214228.4 2009-Apr-21 20:17:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-21 20:17:08 LOG4 got_cormsg: From DATATAKING: 095225.1 2009-Apr-21 20:17:08 LOG4 got_cormsg: From DATATAKING: vw% 214228.4 2009-Apr-21 20:17:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:17:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-21 20:17:08 LOG4 got_cormsg: From DATATAKING: pnt tr 095225.1 214228.4 -CJ 2009-Apr-21 20:17:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 20:17:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-21 20:17:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:17:13 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-21 20:17:13 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2009-Apr-21 20:17:13 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-21 20:17:13 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2009-Apr-21 20:17:19 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-21 20:17:19 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2009-Apr-21 20:17:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-21 20:17:19 INFO2 waittrk: Now tracking AGES3193_p2_088 2009-Apr-21 20:17:19 LOG4 waittrk: Current telescope position: Az = 187.15 ZA = 3.36 2009-Apr-21 20:17:19 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-21 20:17:19 LOG5 finish_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2009-Apr-21 20:17:19 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-21 20:17:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 20:17:19 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-21 20:17:19 LOG5 end_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2009-Apr-21 20:17:19 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-21 20:17:19 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2009-Apr-21 20:17:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-21 20:17:19 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-21 20:17:19 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-21 20:17:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-21 20:17:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 20:17:19 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-21 20:17:19 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2009-Apr-21 20:17:19 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-21 20:17:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 20:17:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:17:22 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-21 20:17:22 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-21 20:17:22 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2009-Apr-21 20:17:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-21 20:17:22 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-21 20:17:22 LOG5 begin_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2009-Apr-21 20:17:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-21 20:17:22 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-21 20:17:22 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-21 20:17:22 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-21 20:17:22 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-21 20:17:22 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-21 20:17:22 LOG5 begin_task: Level: (5) ID = <10187> Status = 0 0 0 0 ok 2009-Apr-21 20:17:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-21 20:17:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:17:23 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Apr-21 20:17:23 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-21 20:17:23 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 4 3 dB 2009-Apr-21 20:17:23 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-21 20:17:23 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-21 20:17:23 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-21 20:17:23 LOG5 end_task: Level: (5) ID = <10187> Status = 0 0 0 0 ok 2009-Apr-21 20:17:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.101 0.909 ALFA beam 1: 1.089 1.062 2009-Apr-21 20:17:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.007 0.988 ALFA beam 3: 1.114 1.104 2009-Apr-21 20:17:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.897 0.928 ALFA beam 5: 1.101 0.923 2009-Apr-21 20:17:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.926 0.102 ALFA beam 7: 1.017 0.126 2009-Apr-21 20:17:23 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-21 20:17:23 LOG5 finish_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2009-Apr-21 20:17:23 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-21 20:17:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 20:17:23 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-21 20:17:23 LOG5 end_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2009-Apr-21 20:17:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-21 20:17:23 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-21 20:17:23 LOG5 finish_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2009-Apr-21 20:17:23 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-21 20:17:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 20:17:23 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-21 20:17:23 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2009-Apr-21 20:17:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-Apr-21 20:17:23 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-Apr-21 20:17:23 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-Apr-21 20:17:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-Apr-21 20:17:23 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-Apr-21 20:17:23 START begin_task: Starting task 'WAPP calibration' 2009-Apr-21 20:17:23 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2009-Apr-21 20:17:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-21 20:17:23 START begin_task: Starting task 'selecting calibration type' 2009-Apr-21 20:17:23 LOG5 begin_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2009-Apr-21 20:17:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-21 20:17:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-21 20:17:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 20:17:23 START begin_task: Starting task 'waiting on setcal' 2009-Apr-21 20:17:23 LOG5 begin_task: Level: (5) ID = <10190> Status = 0 0 0 0 ok 2009-Apr-21 20:17:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-Apr-21 20:17:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-21 20:17:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 20:17:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:17:23 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-21 20:17:23 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-21 20:17:23 LOG5 end_task: Level: (5) ID = <10190> Status = 0 0 0 0 ok 2009-Apr-21 20:17:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-21 20:17:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-21 20:17:23 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-21 20:17:23 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-21 20:17:23 LOG5 begin_task: Level: (5) ID = <10191> Status = 0 0 0 0 ok 2009-Apr-21 20:17:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:17:23 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-21 20:17:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-21 20:17:23 LOG5 end_task: Level: (5) ID = <10191> Status = 0 0 0 0 ok 2009-Apr-21 20:17:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-21 20:17:24 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-21 20:17:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-21 20:17:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-21 20:17:24 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-21 20:17:24 LOG5 begin_task: Level: (5) ID = <10192> Status = 0 0 0 0 ok 2009-Apr-21 20:17:24 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-21 20:17:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-21 20:17:24 LOG5 end_task: Level: (5) ID = <10192> Status = 0 0 0 0 ok 2009-Apr-21 20:17:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-21 20:17:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-21 20:17:24 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-21 20:17:24 LOG5 end_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2009-Apr-21 20:17:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-21 20:17:24 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-21 20:17:24 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-21 20:17:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-21 20:17:24 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2009-Apr-21 20:17:24 NOTE WAPPDATA-new_file: New FITS file: wapp.20090421.a2048.0003.fits 2009-Apr-21 20:17:24 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-21 20:17:24 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090421.a2048.0003.fits} 2009-Apr-21 20:17:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-21 20:17:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-21 20:17:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-21 20:17:24 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2009-Apr-21 20:17:24 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-21 20:17:24 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-Apr-21 20:17:24 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-21 20:17:24 LOG5 begin_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2009-Apr-21 20:17:24 LOG5 log_alfabeam: Parameters: 9.8736388888888911 21.707888888888885 9.852609 2009.3062160303698 12.099926 2009-Apr-21 20:17:24 LOG4 log_alfabeam: ALFABEAM 0 9.873638888888863 21.707888888888885 2009-Apr-21 20:17:24 LOG4 log_alfabeam: ALFABEAM 1 9.874656106534475 21.603642136214578 2009-Apr-21 20:17:24 LOG4 log_alfabeam: ALFABEAM 2 9.879742432749822 21.673293210753219 2009-Apr-21 20:17:24 LOG4 log_alfabeam: ALFABEAM 3 9.878818626240188 21.777887975662736 2009-Apr-21 20:17:24 LOG4 log_alfabeam: ALFABEAM 4 9.872496425648643 21.812115329811274 2009-Apr-21 20:17:24 LOG4 log_alfabeam: ALFABEAM 5 9.867425647325252 21.740212364502629 2009-Apr-21 20:17:24 LOG4 log_alfabeam: ALFABEAM 6 9.868660656569860 21.636372944108455 2009-Apr-21 20:17:24 INFO2 take_data: Starting WAPP scan: 911100243 2009-Apr-21 20:17:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Apr-21 20:17:24 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-21 20:17:24 LOG5 begin_task: Level: (5) ID = <10195> Status = 0 0 0 0 ok 2009-Apr-21 20:17:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 20:17:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-21 20:17:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 0.909 1.089 1.062 2009-Apr-21 20:17:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.007 0.988 1.114 1.104 2009-Apr-21 20:17:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.897 0.928 1.101 0.923 2009-Apr-21 20:17:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.102 1.017 0.126 2009-Apr-21 20:17:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1045.00 2009-Apr-21 20:17:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.118196 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 20:17:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 20:17:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 20:17:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 20:17:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 20:17:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 20:17:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 20:17:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 20:17:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 20:17:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 20:17:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-21 20:17:30 LOG5 end_task: Level: (5) ID = <10195> Status = 0 0 0 0 ok 2009-Apr-21 20:17:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-21 20:17:30 LOG5 end_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2009-Apr-21 20:17:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-21 20:17:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-21 20:17:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-21 20:17:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-21 20:17:30 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2009-Apr-21 20:17:30 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-21 20:17:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-21 20:17:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-21 20:17:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-21 20:17:30 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2009-Apr-21 20:17:30 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-Apr-21 20:17:30 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-Apr-21 20:17:30 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-21 20:17:30 LOG5 begin_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2009-Apr-21 20:17:30 LOG5 log_alfabeam: Parameters: 9.8736388888888911 21.707888888888885 9.854559 2009.3062162521865 12.099926 2009-Apr-21 20:17:30 LOG4 log_alfabeam: ALFABEAM 0 9.873638888888944 21.707888888888885 2009-Apr-21 20:17:30 LOG4 log_alfabeam: ALFABEAM 1 9.874717822490522 21.603762916416631 2009-Apr-21 20:17:30 LOG4 log_alfabeam: ALFABEAM 2 9.879762707879783 21.673996685949078 2009-Apr-21 20:17:30 LOG4 log_alfabeam: ALFABEAM 3 9.878777002344261 21.778481753738607 2009-Apr-21 20:17:30 LOG4 log_alfabeam: ALFABEAM 4 9.872434513485473 21.811980078373420 2009-Apr-21 20:17:30 LOG4 log_alfabeam: ALFABEAM 5 9.867406639807811 21.739494086343541 2009-Apr-21 20:17:30 LOG4 log_alfabeam: ALFABEAM 6 9.868703350475796 21.635800974981592 2009-Apr-21 20:17:30 INFO2 take_data: Starting WAPP scan: 911100244 2009-Apr-21 20:17:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Apr-21 20:17:31 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-21 20:17:31 LOG5 begin_task: Level: (5) ID = <10198> Status = 0 0 0 0 ok 2009-Apr-21 20:17:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 20:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.547 (still bad) 2009-Apr-21 20:17:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1052.00 2009-Apr-21 20:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.118196 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 20:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 20:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 20:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 20:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 20:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.547 (still bad) 2009-Apr-21 20:17:37 LOG3 WAPP=2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 20:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 20:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 20:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 20:17:37 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-Apr-21 20:17:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 20:17:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-21 20:17:37 LOG5 end_task: Level: (5) ID = <10198> Status = 0 0 0 0 ok 2009-Apr-21 20:17:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-21 20:17:37 LOG5 end_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2009-Apr-21 20:17:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-21 20:17:37 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-21 20:17:37 LOG5 finish_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2009-Apr-21 20:17:37 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-21 20:17:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 20:17:37 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-21 20:17:37 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2009-Apr-21 20:17:37 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-Apr-21 20:17:37 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 187.99 and ZA = 3.34 2009-Apr-21 20:17:37 LOG3 track_source: Calling 'track_source AGES3193_p2_088 187.99 3.3432041779 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Apr-21 20:17:37 START begin_task: Starting task 'sending tracking commands' 2009-Apr-21 20:17:37 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2009-Apr-21 20:17:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_088} INFO {Slewing to source 'AGES3193_p2_088' ...} 2009-Apr-21 20:17:37 INFO1 track_source: Starting to track AGES3193_p2_088 2009-Apr-21 20:17:37 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_088" 2009-Apr-21 20:17:37 LOG3 vw_send: To DATATAKING: set ra 187.99 2009-Apr-21 20:17:37 LOG3 vw_send: To DATATAKING: set dec 3.3432041779 2009-Apr-21 20:17:37 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-21 20:17:37 LOG3 vw_send: To DATATAKING: pnt tr 187.99 3.3432041779 -CF 2009-Apr-21 20:17:37 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 20:17:37 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-21 20:17:37 LOG5 finish_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2009-Apr-21 20:17:37 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-21 20:17:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 20:17:38 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-21 20:17:38 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2009-Apr-21 20:17:38 LOG1 fixed_driftmap: Parameters: HA = -00:01:59.9 Start = 09:51:32.8 LST = 09:51:23.4 diff = 9.4 secs 2009-Apr-21 20:17:38 INFO2 fixed_driftmap: Waiting 7.4 seconds for RA 9:53:33 2009-Apr-21 20:17:38 INFO2 lstwait: Waiting for 7.4 secs from LST 09:51:23 to LST 09:51:31 ... 2009-Apr-21 20:17:38 LOG4 send_obs_status: To obs_status: <1> TASKTIME 7.3702336578676508 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Apr-21 20:17:38 START begin_task: Starting task 'waiting on wait on LST' 2009-Apr-21 20:17:38 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2009-Apr-21 20:17:38 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_088" 2009-Apr-21 20:17:38 LOG3 WAPP=1-save_rfcalc: Channel 5: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 20:17:38 LOG4 got_cormsg: From DATATAKING: set ra 187.99 2009-Apr-21 20:17:38 LOG4 got_cormsg: From DATATAKING: set dec 3.3432041779 2009-Apr-21 20:17:38 LOG4 got_cormsg: From DATATAKING: vw% 187.99 2009-Apr-21 20:17:38 LOG4 got_cormsg: From DATATAKING: vw% 3.3432041779 2009-Apr-21 20:17:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:17:38 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-21 20:17:38 LOG4 got_cormsg: From DATATAKING: pnt tr 187.99 3.3432041779 -CF 2009-Apr-21 20:17:38 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 20:17:38 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-21 20:17:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:17:45 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Apr-21 20:17:45 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2009-Apr-21 20:17:45 LOG4 lstwait: Finished waiting 0.63 seconds late 2009-Apr-21 20:17:45 INFO3 lstwait: Finished waiting 2009-Apr-21 20:17:45 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-21 20:17:45 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-Apr-21 20:17:45 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-21 20:17:45 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-Apr-21 20:17:45 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-21 20:17:45 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-Apr-21 20:17:45 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-21 20:17:45 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2009-Apr-21 20:17:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-21 20:17:45 INFO2 take_data: Starting WAPP scan: 911100245 2009-Apr-21 20:17:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-Apr-21 20:17:46 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-21 20:17:46 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2009-Apr-21 20:17:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 20:17:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1067.00 2009-Apr-21 20:17:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.118196 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 20:17:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 20:17:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 20:17:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 20:17:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 20:17:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 20:17:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 20:17:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 20:17:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.118196 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 20:17:48 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2009-Apr-21 20:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-21 20:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:17:55 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2009-Apr-21 20:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Apr-21 20:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-21 20:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-21 20:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Apr-21 20:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-21 20:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-21 20:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-21 20:18:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-21 20:18:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 0.911 1.090 1.065 2009-Apr-21 20:18:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.011 0.992 1.112 1.103 2009-Apr-21 20:18:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.898 0.933 1.100 0.925 2009-Apr-21 20:18:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.102 1.020 0.126 2009-Apr-21 20:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-21 20:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-21 20:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-21 20:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-21 20:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.115 (still bad) 2009-Apr-21 20:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-21 20:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-21 20:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-21 20:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.115 (still bad) 2009-Apr-21 20:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.113 (still bad) 2009-Apr-21 20:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-21 20:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.111 (still bad) 2009-Apr-21 20:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.115 (still bad) 2009-Apr-21 20:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-21 20:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.113 (still bad) 2009-Apr-21 20:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.112 (still bad) 2009-Apr-21 20:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:19:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-21 20:19:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 0.910 1.091 1.068 2009-Apr-21 20:19:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.010 0.991 1.115 1.104 2009-Apr-21 20:19:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.897 0.934 1.102 0.929 2009-Apr-21 20:19:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.102 1.035 0.126 2009-Apr-21 20:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.120 (still bad) 2009-Apr-21 20:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-21 20:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-21 20:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-21 20:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:20:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-21 20:20:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.107 0.913 1.093 1.069 2009-Apr-21 20:20:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.007 0.991 1.113 1.103 2009-Apr-21 20:20:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.896 0.929 1.099 0.926 2009-Apr-21 20:20:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.102 1.022 0.126 2009-Apr-21 20:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-21 20:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2009-Apr-21 20:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-21 20:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-21 20:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-21 20:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-21 20:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-21 20:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:21:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-21 20:21:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 0.907 1.091 1.065 2009-Apr-21 20:21:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.009 0.989 1.111 1.100 2009-Apr-21 20:21:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.897 0.935 1.099 0.925 2009-Apr-21 20:21:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.102 1.017 0.126 2009-Apr-21 20:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-21 20:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-21 20:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-21 20:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-21 20:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-21 20:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.109 (still bad) 2009-Apr-21 20:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-21 20:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-21 20:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:22:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-21 20:22:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.109 0.915 1.096 1.071 2009-Apr-21 20:22:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.012 0.995 1.114 1.103 2009-Apr-21 20:22:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.899 0.936 1.104 0.927 2009-Apr-21 20:22:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.102 1.020 0.126 2009-Apr-21 20:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-21 20:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.110 (still bad) 2009-Apr-21 20:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-21 20:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-21 20:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-21 20:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-21 20:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-21 20:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-21 20:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-21 20:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-21 20:23:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-21 20:23:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 0.911 1.091 1.067 2009-Apr-21 20:23:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.011 0.992 1.119 1.104 2009-Apr-21 20:23:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.903 0.938 1.106 0.929 2009-Apr-21 20:23:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.102 1.022 0.126 2009-Apr-21 20:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-21 20:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-21 20:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-21 20:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2009-Apr-21 20:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-21 20:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-21 20:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-21 20:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-21 20:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-21 20:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-21 20:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-21 20:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-21 20:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-21 20:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2009-Apr-21 20:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-21 20:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-21 20:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-21 20:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-21 20:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-21 20:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2009-Apr-21 20:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.125 (still bad) 2009-Apr-21 20:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-21 20:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2009-Apr-21 20:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-21 20:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-21 20:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-21 20:24:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-21 20:24:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 0.911 1.090 1.061 2009-Apr-21 20:24:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.009 0.989 1.119 1.103 2009-Apr-21 20:24:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.904 0.940 1.106 0.926 2009-Apr-21 20:24:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.102 1.018 0.126 2009-Apr-21 20:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-21 20:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-21 20:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-21 20:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:25:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-21 20:25:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 0.910 1.092 1.063 2009-Apr-21 20:25:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.010 0.989 1.113 1.097 2009-Apr-21 20:25:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.900 0.933 1.101 0.926 2009-Apr-21 20:25:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.102 1.020 0.126 2009-Apr-21 20:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-21 20:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-21 20:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-21 20:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-21 20:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-21 20:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-21 20:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:26:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-21 20:26:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.111 0.918 1.094 1.064 2009-Apr-21 20:26:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.016 0.992 1.113 1.098 2009-Apr-21 20:26:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.901 0.936 1.103 0.925 2009-Apr-21 20:26:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.102 1.020 0.126 2009-Apr-21 20:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-21 20:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-21 20:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-21 20:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-21 20:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-21 20:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-21 20:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:27:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-21 20:27:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.110 0.916 1.094 1.065 2009-Apr-21 20:27:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.014 0.991 1.117 1.100 2009-Apr-21 20:27:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.902 0.937 1.107 0.927 2009-Apr-21 20:27:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.102 1.019 0.126 2009-Apr-21 20:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.115 (still bad) 2009-Apr-21 20:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2009-Apr-21 20:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.126 (still bad) 2009-Apr-21 20:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.122 (still bad) 2009-Apr-21 20:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:28:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-21 20:28:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.107 0.915 1.093 1.067 2009-Apr-21 20:28:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.016 0.995 1.116 1.103 2009-Apr-21 20:28:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.899 0.936 1.108 0.929 2009-Apr-21 20:28:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.102 1.020 0.126 2009-Apr-21 20:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.121 (still bad) 2009-Apr-21 20:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-21 20:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.111 (still bad) 2009-Apr-21 20:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-21 20:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-21 20:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-21 20:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:29:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-21 20:29:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 0.914 1.093 1.066 2009-Apr-21 20:29:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.017 0.995 1.115 1.101 2009-Apr-21 20:29:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.903 0.938 1.105 0.928 2009-Apr-21 20:29:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.102 1.019 0.126 2009-Apr-21 20:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-21 20:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-21 20:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-21 20:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.113 (still bad) 2009-Apr-21 20:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.122 (still bad) 2009-Apr-21 20:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.112 (still bad) 2009-Apr-21 20:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-21 20:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-21 20:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-21 20:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:30:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-21 20:30:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 0.915 1.093 1.066 2009-Apr-21 20:30:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.019 0.997 1.115 1.102 2009-Apr-21 20:30:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.902 0.941 1.106 0.926 2009-Apr-21 20:30:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.102 1.023 0.126 2009-Apr-21 20:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.123 (still bad) 2009-Apr-21 20:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.124 (still bad) 2009-Apr-21 20:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-21 20:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-21 20:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.130 (still bad) 2009-Apr-21 20:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 20:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.141 (still bad) 2009-Apr-21 20:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.134 (still bad) 2009-Apr-21 20:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.132 (still bad) 2009-Apr-21 20:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-21 20:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.124 (still bad) 2009-Apr-21 20:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-21 20:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-21 20:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.130 (still bad) 2009-Apr-21 20:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.137 (still bad) 2009-Apr-21 20:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.130 (still bad) 2009-Apr-21 20:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2009-Apr-21 20:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-21 20:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:31:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-21 20:31:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 0.913 1.096 1.069 2009-Apr-21 20:31:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.012 0.992 1.118 1.105 2009-Apr-21 20:31:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.903 0.939 1.109 0.935 2009-Apr-21 20:31:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.102 1.021 0.126 2009-Apr-21 20:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.119 (still bad) 2009-Apr-21 20:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-21 20:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.122 (still bad) 2009-Apr-21 20:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-21 20:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-21 20:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.122 (still bad) 2009-Apr-21 20:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-21 20:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-21 20:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-21 20:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.127 (still bad) 2009-Apr-21 20:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-21 20:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-21 20:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-21 20:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-21 20:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.126 (still bad) 2009-Apr-21 20:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-21 20:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-21 20:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.124 (still bad) 2009-Apr-21 20:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.123 (still bad) 2009-Apr-21 20:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.123 (still bad) 2009-Apr-21 20:32:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 20:32:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.111 0.922 1.099 1.075 2009-Apr-21 20:32:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.017 0.997 1.128 1.117 2009-Apr-21 20:32:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.908 0.946 1.106 0.937 2009-Apr-21 20:32:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.103 1.022 0.127 2009-Apr-21 20:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-21 20:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-21 20:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-21 20:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.115 (still bad) 2009-Apr-21 20:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2009-Apr-21 20:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.121 (still bad) 2009-Apr-21 20:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-21 20:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.115 (still bad) 2009-Apr-21 20:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.122 (still bad) 2009-Apr-21 20:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.115 (still bad) 2009-Apr-21 20:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.114 (still bad) 2009-Apr-21 20:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-21 20:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2009-Apr-21 20:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.120 (still bad) 2009-Apr-21 20:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2009-Apr-21 20:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-21 20:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-21 20:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-21 20:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.119 (still bad) 2009-Apr-21 20:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-21 20:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.116 (still bad) 2009-Apr-21 20:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-21 20:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.115 (still bad) 2009-Apr-21 20:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-21 20:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-21 20:33:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 20:33:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 0.916 1.099 1.073 2009-Apr-21 20:33:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.015 0.993 1.117 1.104 2009-Apr-21 20:33:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.901 0.938 1.108 0.933 2009-Apr-21 20:33:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.103 1.025 0.127 2009-Apr-21 20:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.115 (still bad) 2009-Apr-21 20:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2009-Apr-21 20:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-21 20:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-21 20:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-21 20:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2009-Apr-21 20:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.119 (still bad) 2009-Apr-21 20:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2009-Apr-21 20:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2009-Apr-21 20:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-21 20:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-21 20:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2009-Apr-21 20:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-21 20:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2009-Apr-21 20:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-21 20:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.119 (still bad) 2009-Apr-21 20:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-21 20:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-21 20:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.119 (still bad) 2009-Apr-21 20:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2009-Apr-21 20:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-21 20:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.119 (still bad) 2009-Apr-21 20:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.121 (still bad) 2009-Apr-21 20:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-21 20:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-21 20:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-21 20:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-21 20:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.121 (still bad) 2009-Apr-21 20:34:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 20:34:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 0.916 1.100 1.072 2009-Apr-21 20:34:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.025 1.004 1.121 1.106 2009-Apr-21 20:34:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.901 0.938 1.109 0.933 2009-Apr-21 20:34:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.103 1.022 0.127 2009-Apr-21 20:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.119 (still bad) 2009-Apr-21 20:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.120 (still bad) 2009-Apr-21 20:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-21 20:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-21 20:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.120 (still bad) 2009-Apr-21 20:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.119 (still bad) 2009-Apr-21 20:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.120 (still bad) 2009-Apr-21 20:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.125 (still bad) 2009-Apr-21 20:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.122 (still bad) 2009-Apr-21 20:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.124 (still bad) 2009-Apr-21 20:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.129 (still bad) 2009-Apr-21 20:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.122 (still bad) 2009-Apr-21 20:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.119 (still bad) 2009-Apr-21 20:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.120 (still bad) 2009-Apr-21 20:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2009-Apr-21 20:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-21 20:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.124 (still bad) 2009-Apr-21 20:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-21 20:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-21 20:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-21 20:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-21 20:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-21 20:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.123 (still bad) 2009-Apr-21 20:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.117 (still bad) 2009-Apr-21 20:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-21 20:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.120 (still bad) 2009-Apr-21 20:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-21 20:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.121 (still bad) 2009-Apr-21 20:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-21 20:35:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 20:35:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 0.918 1.095 1.068 2009-Apr-21 20:35:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.025 1.001 1.117 1.107 2009-Apr-21 20:35:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.900 0.937 1.111 0.935 2009-Apr-21 20:35:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.103 1.024 0.127 2009-Apr-21 20:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-21 20:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.121 (still bad) 2009-Apr-21 20:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-21 20:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.119 (still bad) 2009-Apr-21 20:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.125 (still bad) 2009-Apr-21 20:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-21 20:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.115 (still bad) 2009-Apr-21 20:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-21 20:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2009-Apr-21 20:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-21 20:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.124 (still bad) 2009-Apr-21 20:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-21 20:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.115 (still bad) 2009-Apr-21 20:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.120 (still bad) 2009-Apr-21 20:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.115 (still bad) 2009-Apr-21 20:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-21 20:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.124 (still bad) 2009-Apr-21 20:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-21 20:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2009-Apr-21 20:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.120 (still bad) 2009-Apr-21 20:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2009-Apr-21 20:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.116 (still bad) 2009-Apr-21 20:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.125 (still bad) 2009-Apr-21 20:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-21 20:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-21 20:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-21 20:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-21 20:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.120 (still bad) 2009-Apr-21 20:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.117 (still bad) 2009-Apr-21 20:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.118 (still bad) 2009-Apr-21 20:36:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 20:36:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.107 0.919 1.096 1.071 2009-Apr-21 20:36:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.014 0.991 1.118 1.110 2009-Apr-21 20:36:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.899 0.937 1.106 0.933 2009-Apr-21 20:36:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.103 1.029 0.127 2009-Apr-21 20:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-21 20:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.119 (still bad) 2009-Apr-21 20:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.119 (still bad) 2009-Apr-21 20:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.119 (still bad) 2009-Apr-21 20:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.118 (still bad) 2009-Apr-21 20:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.120 (still bad) 2009-Apr-21 20:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-21 20:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.119 (still bad) 2009-Apr-21 20:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.121 (still bad) 2009-Apr-21 20:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.122 (still bad) 2009-Apr-21 20:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.123 (still bad) 2009-Apr-21 20:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.124 (still bad) 2009-Apr-21 20:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.102 and 1.126 (still bad) 2009-Apr-21 20:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.125 (still bad) 2009-Apr-21 20:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.125 (still bad) 2009-Apr-21 20:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.125 (still bad) 2009-Apr-21 20:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.124 (still bad) 2009-Apr-21 20:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.125 (still bad) 2009-Apr-21 20:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.124 (still bad) 2009-Apr-21 20:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.124 (still bad) 2009-Apr-21 20:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.126 (still bad) 2009-Apr-21 20:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.128 (still bad) 2009-Apr-21 20:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.131 (still bad) 2009-Apr-21 20:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.133 (still bad) 2009-Apr-21 20:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.140 (still bad) 2009-Apr-21 20:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.144 (still bad) 2009-Apr-21 20:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.150 (still bad) 2009-Apr-21 20:37:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 20:37:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-21 20:37:47 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2009-Apr-21 20:37:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-21 20:37:47 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2009-Apr-21 20:37:47 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Apr-21 20:37:47 LOG5 finish_task: Level: (2) ID = <10169> Status = 0 0 0 0 ok 2009-Apr-21 20:37:47 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-Apr-21 20:37:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-21 20:37:47 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-Apr-21 20:37:47 LOG5 end_task: Level: (2) ID = <10169> Status = 0 0 0 0 ok 2009-Apr-21 20:37:47 COMMAND run_command_line: EXECUTING command 26: 'ENDIF' 2009-Apr-21 20:37:47 COMMAND run_command_line: EXECUTING command 29: 'IF LSTSLEW(AGES3193_p2_090) < 101532 THEN' 2009-Apr-21 20:37:47 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_090) < 101532 2009-Apr-21 20:37:47 INFO5 is_if_valid: Condition parsed as: 10.234928666666667 < 10.258888888888889 2009-Apr-21 20:37:47 COMMAND run_command_line: EXECUTING command 30: 'FIXEDDRIFT az=123.16 alfaangle=73.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_090 ra=95300.00 dec=213930.00' 2009-Apr-21 20:37:47 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-Apr-21 20:37:48 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-21 20:37:48 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 123.16 73.8 hcorcal 5 tracking no first 1 AGES3193_p2_090 95300.00 213930.00 J 8500.0 Heliocentric velocity(optical)' 2009-Apr-21 20:37:48 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Apr-21 20:37:48 LOG5 begin_task: Level: (2) ID = <10203> Status = 0 0 0 0 ok 2009-Apr-21 20:37:48 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_088' 2009-Apr-21 20:37:48 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Apr-21 20:37:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_090} 2009-Apr-21 20:37:48 INFO3 fixed_driftmap: Sending telescope to Az = 123.16 and ZA = 6.11 2009-Apr-21 20:37:48 LOG3 track_source: Calling 'track_source AGES3193_p2_090 123.16 6.1096445431 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Apr-21 20:37:48 START begin_task: Starting task 'sending tracking commands' 2009-Apr-21 20:37:48 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2009-Apr-21 20:37:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_090} INFO {Slewing to source 'AGES3193_p2_090' ...} 2009-Apr-21 20:37:48 INFO1 track_source: Starting to track AGES3193_p2_090 2009-Apr-21 20:37:48 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_090" 2009-Apr-21 20:37:48 LOG3 vw_send: To DATATAKING: set ra 123.16 2009-Apr-21 20:37:48 LOG3 vw_send: To DATATAKING: set dec 6.1096445431 2009-Apr-21 20:37:48 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-21 20:37:48 LOG3 vw_send: To DATATAKING: pnt tr 123.16 6.1096445431 -CF 2009-Apr-21 20:37:48 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 20:37:48 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-21 20:37:48 LOG5 finish_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2009-Apr-21 20:37:48 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-21 20:37:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 20:37:48 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-21 20:37:48 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2009-Apr-21 20:37:48 START begin_task: Starting task 'rotate ALFA to +73.8 degrees' 2009-Apr-21 20:37:48 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2009-Apr-21 20:37:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +73.8 degrees ...} 2009-Apr-21 20:37:48 INFO2 rotate_alfa: ALFA commanded to +73.8 degrees 2009-Apr-21 20:37:48 LOG3 sock_errsend: To ALFAMOTOR: POSITION 73.8 REPLY 2009-Apr-21 20:37:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-21 20:37:48 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-21 20:37:48 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2009-Apr-21 20:37:48 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_090" 2009-Apr-21 20:37:48 LOG4 got_cormsg: From DATATAKING: set ra 123.16 2009-Apr-21 20:37:48 LOG4 got_cormsg: From DATATAKING: set dec 6.1096445431 2009-Apr-21 20:37:48 LOG4 got_cormsg: From DATATAKING: vw% 123.16 2009-Apr-21 20:37:48 LOG4 got_cormsg: From DATATAKING: vw% 6.1096445431 2009-Apr-21 20:37:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:37:48 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-21 20:37:48 LOG4 got_cormsg: From DATATAKING: pnt tr 123.16 6.1096445431 -CF 2009-Apr-21 20:37:48 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 20:37:48 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-21 20:37:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.150 (still bad) 2009-Apr-21 20:38:23 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-21 20:38:23 INFO3 alfa_motor: ALFA rotator in-position +73.80 degrees 2009-Apr-21 20:38:23 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-21 20:38:23 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2009-Apr-21 20:38:23 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-21 20:38:23 STOP finish_task: Finishing task 'rotate ALFA to +73.8 degrees' 2009-Apr-21 20:38:23 LOG5 finish_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2009-Apr-21 20:38:23 INFO2 finish_task: DONE finished configuration: rotating ALFA to +73.8 degrees 2009-Apr-21 20:38:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 20:38:23 STOP end_task: Finishing task 'rotate ALFA to +73.8 degrees' with status 'OK' 2009-Apr-21 20:38:23 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2009-Apr-21 20:38:24 START begin_task: Starting task 'waiting on telescope' 2009-Apr-21 20:38:24 LOG5 begin_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2009-Apr-21 20:38:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-21 20:38:24 LOG3 waittrk: Start waittrk 5 2009-Apr-21 20:38:24 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-21 20:38:24 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2009-Apr-21 20:38:29 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-21 20:38:29 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2009-Apr-21 20:38:29 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-21 20:38:29 LOG5 begin_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2009-Apr-21 20:40:36 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-21 20:40:36 LOG5 end_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2009-Apr-21 20:40:36 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-21 20:40:36 INFO2 waittrk: Now tracking AGES3193_p2_090 2009-Apr-21 20:40:36 LOG4 waittrk: Current telescope position: Az = 122.98 ZA = 6.11 2009-Apr-21 20:40:36 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-21 20:40:36 LOG5 finish_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2009-Apr-21 20:40:36 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-21 20:40:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 20:40:36 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-21 20:40:36 LOG5 end_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2009-Apr-21 20:40:36 START begin_task: Starting task 'selecting calibration type' 2009-Apr-21 20:40:36 LOG5 begin_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2009-Apr-21 20:40:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-21 20:40:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-21 20:40:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 20:40:36 START begin_task: Starting task 'waiting on setcal' 2009-Apr-21 20:40:36 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2009-Apr-21 20:40:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-21 20:40:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 20:40:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:40:37 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-21 20:40:37 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-21 20:40:37 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2009-Apr-21 20:40:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-21 20:40:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-21 20:40:37 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-21 20:40:37 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-21 20:40:37 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2009-Apr-21 20:40:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:40:37 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-21 20:40:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-21 20:40:37 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2009-Apr-21 20:40:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-21 20:40:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-21 20:40:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-21 20:40:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-21 20:40:37 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-21 20:40:37 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2009-Apr-21 20:40:37 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-21 20:40:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-21 20:40:37 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2009-Apr-21 20:40:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-21 20:40:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-21 20:40:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-21 20:40:37 LOG5 end_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2009-Apr-21 20:40:37 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-Apr-21 20:40:37 INFO2 astwait: Waiting for 5 seconds from 00:40:37 to 00:40:42 UTC ... 2009-Apr-21 20:40:37 LOG4 send_obs_status: To obs_status: <1> TASKTIME 5 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Apr-21 20:40:37 START begin_task: Starting task 'waiting on waiting for AST time' 2009-Apr-21 20:40:37 LOG5 begin_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2009-Apr-21 20:40:42 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-Apr-21 20:40:42 LOG5 end_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2009-Apr-21 20:40:42 INFO3 astwait: Finished waiting 2009-Apr-21 20:40:42 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-21 20:40:42 LOG5 dopset_later: Calling 'dopset_later 61.248300060141347' 2009-Apr-21 20:40:42 INFO3 dopset_later: Setting Doppler correction for 20:41:42 (61.2 seconds from now) 2009-Apr-21 20:40:42 LOG5 antvel: Calling 'antvel 123.160000 6.109645 F 61.248300060141347' 2009-Apr-21 20:40:42 LOG2 antvel: Transforming current Az = 123.16 ZA = 6.11 to apparent RA = 09:53:32.6 Dec = +21:36:50.0 2009-Apr-21 20:40:42 LOG2 antvel: Parameters to Doppler: Heliocentric 88902 2009 111 0.0 2009-Apr-21 20:40:42 INFO5 antvel: Computed antenna velocity: +27.22967 km/s 2009-Apr-21 20:40:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.229671600300001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-Apr-21 20:40:42 INFO4 dopset_gen: New sky frequencies: 1381.117984 1381.117984 1381.117984 1381.117984 1381.117984 1381.117984 1381.117984 1381.117984 1381.117984 2009-Apr-21 20:40:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.117984 sky0=1381.117984 sky1=1381.117984 sky2=1381.117984 sky3=1381.117984 sky4=1381.117984 sky5=1381.117984 sky6=1381.117984 sky7=1381.117984 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-21 20:40:42 LOG2 dopset_gen: Result from 'sky2syn': 1631.117984 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-21 20:40:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631117984.0} 2009-Apr-21 20:40:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 20:40:42 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-Apr-21 20:40:42 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-Apr-21 20:40:42 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.1 Dec = +21:39:28.3 2009-Apr-21 20:40:42 LOG3 track_source: Calling 'track_source AGES3193_p2_090 095203.1 213928.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Apr-21 20:40:42 START begin_task: Starting task 'sending tracking commands' 2009-Apr-21 20:40:42 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2009-Apr-21 20:40:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_090} INFO {Slewing to source 'AGES3193_p2_090' ...} 2009-Apr-21 20:40:42 INFO1 track_source: Starting to track AGES3193_p2_090 2009-Apr-21 20:40:42 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_090" 2009-Apr-21 20:40:42 LOG3 vw_send: To DATATAKING: set ra 095203.1 2009-Apr-21 20:40:42 LOG3 vw_send: To DATATAKING: set dec 213928.3 2009-Apr-21 20:40:42 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-21 20:40:42 LOG3 vw_send: To DATATAKING: pnt tr 095203.1 213928.3 -CJ 2009-Apr-21 20:40:42 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 20:40:42 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-21 20:40:42 LOG5 finish_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2009-Apr-21 20:40:42 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-21 20:40:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 20:40:42 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-21 20:40:42 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2009-Apr-21 20:40:42 START begin_task: Starting task 'waiting on telescope' 2009-Apr-21 20:40:42 LOG5 begin_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2009-Apr-21 20:40:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-21 20:40:42 LOG3 waittrk: Start waittrk 5 2009-Apr-21 20:40:42 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-21 20:40:42 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2009-Apr-21 20:40:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631117984.0} 2009-Apr-21 20:40:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-21 20:40:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:40:42 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_090" 2009-Apr-21 20:40:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:40:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:40:42 LOG4 got_cormsg: From DATATAKING: set ra 095203.1 2009-Apr-21 20:40:42 LOG4 got_cormsg: From DATATAKING: set dec 213928.3 2009-Apr-21 20:40:42 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-21 20:40:42 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.1 213928.3 -CJ 2009-Apr-21 20:40:42 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 20:40:42 LOG4 got_cormsg: From DATATAKING: 095203.1 2009-Apr-21 20:40:42 LOG4 got_cormsg: From DATATAKING: vw% 213928.3 2009-Apr-21 20:40:42 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2009-Apr-21 20:40:47 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-21 20:40:47 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2009-Apr-21 20:40:47 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-21 20:40:47 LOG5 begin_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2009-Apr-21 20:40:49 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-21 20:40:49 LOG5 end_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2009-Apr-21 20:40:49 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-21 20:40:49 INFO2 waittrk: Now tracking AGES3193_p2_090 2009-Apr-21 20:40:49 LOG4 waittrk: Current telescope position: Az = 122.89 ZA = 6.13 2009-Apr-21 20:40:49 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-21 20:40:49 LOG5 finish_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2009-Apr-21 20:40:49 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-21 20:40:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 20:40:49 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-21 20:40:49 LOG5 end_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2009-Apr-21 20:40:49 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-21 20:40:49 LOG5 begin_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2009-Apr-21 20:40:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-21 20:40:49 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-21 20:40:49 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-21 20:40:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-21 20:40:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 20:40:49 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-21 20:40:49 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2009-Apr-21 20:40:50 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-21 20:40:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 20:40:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:40:52 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-21 20:40:52 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-21 20:40:52 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2009-Apr-21 20:40:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-21 20:40:52 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-21 20:40:52 LOG5 begin_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2009-Apr-21 20:40:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-21 20:40:52 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-21 20:40:52 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-21 20:40:52 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-21 20:40:52 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-21 20:40:52 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-21 20:40:52 LOG5 begin_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2009-Apr-21 20:40:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-21 20:40:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:40:53 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Apr-21 20:40:53 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 2 dB 2009-Apr-21 20:40:53 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 4 3 dB 2009-Apr-21 20:40:53 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-21 20:40:53 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-21 20:40:53 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-21 20:40:53 LOG5 end_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2009-Apr-21 20:40:53 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.100 0.913 ALFA beam 1: 1.097 1.076 2009-Apr-21 20:40:53 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.046 1.008 ALFA beam 3: 0.871 1.092 2009-Apr-21 20:40:53 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.901 0.923 ALFA beam 5: 1.087 0.949 2009-Apr-21 20:40:53 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.913 0.103 ALFA beam 7: 1.005 0.128 2009-Apr-21 20:40:53 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-21 20:40:53 LOG5 finish_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2009-Apr-21 20:40:53 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-21 20:40:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 20:40:53 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-21 20:40:53 LOG5 end_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2009-Apr-21 20:40:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-21 20:40:53 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-21 20:40:53 LOG5 finish_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2009-Apr-21 20:40:53 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-21 20:40:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 20:40:53 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-21 20:40:53 LOG5 end_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2009-Apr-21 20:40:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 E. Momjian 2009-Apr-21 20:40:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 E. Momjian 2009-Apr-21 20:40:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 E. Momjian 2009-Apr-21 20:40:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 E. Momjian 2009-Apr-21 20:40:53 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-Apr-21 20:40:53 START begin_task: Starting task 'WAPP calibration' 2009-Apr-21 20:40:53 LOG5 begin_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2009-Apr-21 20:40:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-21 20:40:53 START begin_task: Starting task 'selecting calibration type' 2009-Apr-21 20:40:53 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2009-Apr-21 20:40:53 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-21 20:40:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-21 20:40:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 20:40:53 START begin_task: Starting task 'waiting on setcal' 2009-Apr-21 20:40:53 LOG5 begin_task: Level: (5) ID = <10225> Status = 0 0 0 0 ok 2009-Apr-21 20:40:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 E. Momjian' 2009-Apr-21 20:40:53 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-21 20:40:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-21 20:40:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:40:54 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-21 20:40:54 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-21 20:40:54 LOG5 end_task: Level: (5) ID = <10225> Status = 0 0 0 0 ok 2009-Apr-21 20:40:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-21 20:40:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-21 20:40:54 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-21 20:40:54 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-21 20:40:54 LOG5 begin_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2009-Apr-21 20:40:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:40:54 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-21 20:40:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-21 20:40:54 LOG5 end_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2009-Apr-21 20:40:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-21 20:40:54 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-21 20:40:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-21 20:40:54 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-21 20:40:54 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-21 20:40:54 LOG5 begin_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2009-Apr-21 20:40:54 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-21 20:40:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-21 20:40:54 LOG5 end_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2009-Apr-21 20:40:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-21 20:40:54 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-21 20:40:54 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-21 20:40:54 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2009-Apr-21 20:40:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-21 20:40:54 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-21 20:40:54 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-21 20:40:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-21 20:40:54 LOG5 begin_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2009-Apr-21 20:40:54 NOTE WAPPDATA-new_file: New FITS file: wapp.20090421.a2048.0004.fits 2009-Apr-21 20:40:54 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-21 20:40:54 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090421.a2048.0004.fits} 2009-Apr-21 20:40:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-21 20:40:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-21 20:40:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-21 20:40:54 LOG5 end_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2009-Apr-21 20:40:54 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-21 20:40:54 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-Apr-21 20:40:54 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-21 20:40:54 LOG5 begin_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2009-Apr-21 20:40:54 LOG5 log_alfabeam: Parameters: 9.867527777777779 21.657861111111107 10.245627 2009.3062607422619 73.799950 2009-Apr-21 20:40:54 LOG4 log_alfabeam: ALFABEAM 0 9.867527777777788 21.657861111111114 2009-Apr-21 20:40:54 LOG4 log_alfabeam: ALFABEAM 1 9.869966142626625 21.564461334566435 2009-Apr-21 20:40:54 LOG4 log_alfabeam: ALFABEAM 2 9.874752142768688 21.626457640642769 2009-Apr-21 20:40:54 LOG4 log_alfabeam: ALFABEAM 3 9.872402762559647 21.720130147366021 2009-Apr-21 20:40:54 LOG4 log_alfabeam: ALFABEAM 4 9.865184627651139 21.752271856851795 2009-Apr-21 20:40:54 LOG4 log_alfabeam: ALFABEAM 5 9.860275445161752 21.688413778347009 2009-Apr-21 20:40:54 LOG4 log_alfabeam: ALFABEAM 6 9.862708449004501 21.594273885396593 2009-Apr-21 20:40:54 INFO2 take_data: Starting WAPP scan: 911100246 2009-Apr-21 20:40:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Apr-21 20:40:55 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-21 20:40:55 LOG5 begin_task: Level: (5) ID = <10230> Status = 0 0 0 0 ok 2009-Apr-21 20:40:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 20:40:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 20:40:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 0.913 1.097 1.076 2009-Apr-21 20:40:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.046 1.008 0.871 1.092 2009-Apr-21 20:40:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.901 0.923 1.087 0.949 2009-Apr-21 20:40:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.103 1.005 0.128 2009-Apr-21 20:40:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2456.00 2009-Apr-21 20:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.117984 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 20:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.117984 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 20:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.117984 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 20:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.437 (still bad) 2009-Apr-21 20:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.117984 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 20:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.117984 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 20:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.117984 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 20:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.117984 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 20:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.117984 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 20:41:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.117984 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 20:41:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 20:41:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-21 20:41:01 LOG5 end_task: Level: (5) ID = <10230> Status = 0 0 0 0 ok 2009-Apr-21 20:41:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-21 20:41:01 LOG5 end_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2009-Apr-21 20:41:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-21 20:41:01 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-21 20:41:01 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-21 20:41:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-21 20:41:01 LOG5 begin_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2009-Apr-21 20:41:01 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-21 20:41:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-21 20:41:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-21 20:41:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-21 20:41:01 LOG5 end_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2009-Apr-21 20:41:01 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-Apr-21 20:41:01 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-Apr-21 20:41:01 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-21 20:41:01 LOG5 begin_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2009-Apr-21 20:41:01 LOG5 log_alfabeam: Parameters: 9.867527777777779 21.657861111111107 10.247577 2009.3062609640783 73.799950 2009-Apr-21 20:41:01 LOG4 log_alfabeam: ALFABEAM 0 9.867527777777790 21.657861111111114 2009-Apr-21 20:41:01 LOG4 log_alfabeam: ALFABEAM 1 9.869982389324548 21.564543109181734 2009-Apr-21 20:41:01 LOG4 log_alfabeam: ALFABEAM 2 9.874757704221722 21.626706500352316 2009-Apr-21 20:41:01 LOG4 log_alfabeam: ALFABEAM 3 9.872391683110248 21.720299281338864 2009-Apr-21 20:41:01 LOG4 log_alfabeam: ALFABEAM 4 9.865167808628224 21.752189445058335 2009-Apr-21 20:41:01 LOG4 log_alfabeam: ALFABEAM 5 9.860270137914670 21.688166939264239 2009-Apr-21 20:41:01 LOG4 log_alfabeam: ALFABEAM 6 9.862719559557895 21.594111553942149 2009-Apr-21 20:41:01 INFO2 take_data: Starting WAPP scan: 911100247 2009-Apr-21 20:41:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Apr-21 20:41:02 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-21 20:41:02 LOG5 begin_task: Level: (5) ID = <10233> Status = 0 0 0 0 ok 2009-Apr-21 20:41:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 20:41:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2463.00 2009-Apr-21 20:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.533 (still bad) 2009-Apr-21 20:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.117984 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 20:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.117984 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 20:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.117984 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 20:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.117984 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 20:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.117984 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 20:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.117984 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 20:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.117984 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 20:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.117984 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 20:41:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.117984 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 20:41:08 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-Apr-21 20:41:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 20:41:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-21 20:41:08 LOG5 end_task: Level: (5) ID = <10233> Status = 0 0 0 0 ok 2009-Apr-21 20:41:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-21 20:41:08 LOG5 end_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2009-Apr-21 20:41:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-21 20:41:08 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-21 20:41:08 LOG5 finish_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2009-Apr-21 20:41:08 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-21 20:41:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 20:41:08 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-21 20:41:08 LOG5 end_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2009-Apr-21 20:41:08 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-Apr-21 20:41:08 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 123.16 and ZA = 6.11 2009-Apr-21 20:41:08 LOG3 track_source: Calling 'track_source AGES3193_p2_090 123.16 6.1096445431 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Apr-21 20:41:08 START begin_task: Starting task 'sending tracking commands' 2009-Apr-21 20:41:08 LOG5 begin_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2009-Apr-21 20:41:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_090} INFO {Slewing to source 'AGES3193_p2_090' ...} 2009-Apr-21 20:41:08 INFO1 track_source: Starting to track AGES3193_p2_090 2009-Apr-21 20:41:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_090" 2009-Apr-21 20:41:08 LOG3 vw_send: To DATATAKING: set ra 123.16 2009-Apr-21 20:41:08 LOG3 vw_send: To DATATAKING: set dec 6.1096445431 2009-Apr-21 20:41:08 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-21 20:41:08 LOG3 vw_send: To DATATAKING: pnt tr 123.16 6.1096445431 -CF 2009-Apr-21 20:41:08 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 20:41:08 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-21 20:41:08 LOG5 finish_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2009-Apr-21 20:41:08 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-21 20:41:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 20:41:09 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-21 20:41:09 LOG5 end_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2009-Apr-21 20:41:09 LOG1 fixed_driftmap: Parameters: HA = +00:21:59.9 Start = 10:15:32.6 LST = 10:14:58.3 diff = 34.3 secs 2009-Apr-21 20:41:09 INFO2 fixed_driftmap: Waiting 32.3 seconds for RA 9:53:33 2009-Apr-21 20:41:09 INFO2 lstwait: Waiting for 32.3 secs from LST 10:14:58 to LST 10:15:31 ... 2009-Apr-21 20:41:09 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.255678248942729 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Apr-21 20:41:09 START begin_task: Starting task 'waiting on wait on LST' 2009-Apr-21 20:41:09 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2009-Apr-21 20:41:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_090" 2009-Apr-21 20:41:09 LOG4 got_cormsg: From DATATAKING: set ra 123.16 2009-Apr-21 20:41:09 LOG4 got_cormsg: From DATATAKING: set dec 6.1096445431 2009-Apr-21 20:41:09 LOG4 got_cormsg: From DATATAKING: vw% 123.16 2009-Apr-21 20:41:09 LOG4 got_cormsg: From DATATAKING: vw% 6.1096445431 2009-Apr-21 20:41:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:41:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-21 20:41:09 LOG4 got_cormsg: From DATATAKING: pnt tr 123.16 6.1096445431 -CF 2009-Apr-21 20:41:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 20:41:09 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-21 20:41:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 20:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-21 20:41:41 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Apr-21 20:41:41 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2009-Apr-21 20:41:41 LOG4 lstwait: Finished waiting 0.75 seconds late 2009-Apr-21 20:41:41 INFO3 lstwait: Finished waiting 2009-Apr-21 20:41:41 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-21 20:41:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-Apr-21 20:41:41 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-21 20:41:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-Apr-21 20:41:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-21 20:41:41 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-Apr-21 20:41:41 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-21 20:41:41 LOG5 begin_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2009-Apr-21 20:41:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-21 20:41:41 INFO2 take_data: Starting WAPP scan: 911100248 2009-Apr-21 20:41:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-Apr-21 20:41:42 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-21 20:41:42 LOG5 begin_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2009-Apr-21 20:41:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-21 20:41:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2503.00 2009-Apr-21 20:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.117984 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-21 20:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.117984 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 20:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.117984 MHz Flip = 1 Band = 0 Mixer = 997.775083 MHz 2009-Apr-21 20:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.117984 MHz Flip = 1 Band = 0 Mixer = 944.630725 MHz 2009-Apr-21 20:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.117984 MHz Flip = 1 Band = 0 Mixer = 942.674499 MHz 2009-Apr-21 20:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.117984 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-21 20:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.117984 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-21 20:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.117984 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-21 20:41:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.117984 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-21 20:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-21 20:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-21 20:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-21 20:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-21 20:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Apr-21 20:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-21 20:41:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 20:41:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 0.914 1.098 1.080 2009-Apr-21 20:41:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 1.006 0.889 1.095 2009-Apr-21 20:41:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.903 0.922 1.094 0.950 2009-Apr-21 20:41:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.918 0.103 1.011 0.128 2009-Apr-21 20:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-21 20:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-21 20:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-21 20:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-21 20:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-21 20:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 20:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-21 20:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Apr-21 20:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-21 20:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-21 20:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.109 (still bad) 2009-Apr-21 20:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 20:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 20:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Apr-21 20:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-21 20:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-21 20:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Apr-21 20:42:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-21 20:42:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.108 0.918 1.096 1.079 2009-Apr-21 20:42:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.046 1.009 0.892 1.100 2009-Apr-21 20:42:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.905 0.923 1.093 0.952 2009-Apr-21 20:42:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.916 0.104 1.008 0.128 2009-Apr-21 20:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.118 (still bad) 2009-Apr-21 20:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Apr-21 20:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Apr-21 20:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.115 (still bad) 2009-Apr-21 20:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Apr-21 20:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Apr-21 20:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2009-Apr-21 20:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-21 20:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-21 20:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Apr-21 20:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Apr-21 20:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 20:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 20:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-21 20:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 20:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Apr-21 20:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 20:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-21 20:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:43:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-21 20:43:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.108 0.921 1.103 1.087 2009-Apr-21 20:43:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.052 1.016 0.895 1.107 2009-Apr-21 20:43:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.913 0.932 1.101 0.959 2009-Apr-21 20:43:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.104 1.011 0.128 2009-Apr-21 20:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-21 20:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-21 20:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Apr-21 20:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 20:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-21 20:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-21 20:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-21 20:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-21 20:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-21 20:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-21 20:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-21 20:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-21 20:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-21 20:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Apr-21 20:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-21 20:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-21 20:45:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-21 20:45:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 0.913 1.096 1.078 2009-Apr-21 20:45:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.047 1.008 0.890 1.095 2009-Apr-21 20:45:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.912 0.933 1.101 0.956 2009-Apr-21 20:45:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.104 1.016 0.128 2009-Apr-21 20:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-21 20:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-21 20:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-21 20:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 20:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.103 (still bad) 2009-Apr-21 20:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-21 20:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-21 20:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-21 20:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-21 20:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-21 20:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 20:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-21 20:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 20:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 20:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-21 20:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-21 20:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-21 20:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-21 20:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-21 20:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Apr-21 20:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-21 20:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-21 20:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.096 (still bad) 2009-Apr-21 20:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-21 20:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-21 20:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:46:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 20:46:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 0.912 1.096 1.078 2009-Apr-21 20:46:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.046 1.007 0.890 1.093 2009-Apr-21 20:46:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.904 0.925 1.091 0.947 2009-Apr-21 20:46:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.103 1.010 0.128 2009-Apr-21 20:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-21 20:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-21 20:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-21 20:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-21 20:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.104 (still bad) 2009-Apr-21 20:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-21 20:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-21 20:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-21 20:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.099 (still bad) 2009-Apr-21 20:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Apr-21 20:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 20:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-21 20:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-21 20:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-21 20:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-21 20:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 20:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-21 20:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.098 (still bad) 2009-Apr-21 20:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.101 (still bad) 2009-Apr-21 20:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-21 20:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-21 20:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 20:47:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-21 20:47:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 0.910 1.092 1.075 2009-Apr-21 20:47:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 1.003 0.888 1.088 2009-Apr-21 20:47:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.902 0.921 1.090 0.946 2009-Apr-21 20:47:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.103 1.011 0.128 2009-Apr-21 20:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.102 (still bad) 2009-Apr-21 20:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 20:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 20:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 20:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-21 20:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-21 20:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-21 20:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-21 20:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-21 20:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 20:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-21 20:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-21 20:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.097 (still bad) 2009-Apr-21 20:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-21 20:48:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-21 20:48:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 0.912 1.094 1.078 2009-Apr-21 20:48:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.044 1.005 0.893 1.089 2009-Apr-21 20:48:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.908 0.923 1.094 0.947 2009-Apr-21 20:48:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.104 1.014 0.128 2009-Apr-21 20:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.103 and 1.100 (still bad) 2009-Apr-21 20:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 20:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-21 20:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 20:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-21 20:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-21 20:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-21 20:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 20:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 20:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Apr-21 20:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Apr-21 20:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-21 20:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Apr-21 20:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:49:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-21 20:49:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 0.914 1.093 1.078 2009-Apr-21 20:49:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.044 1.005 0.892 1.088 2009-Apr-21 20:49:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.902 0.922 1.091 0.949 2009-Apr-21 20:49:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.104 1.013 0.128 2009-Apr-21 20:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Apr-21 20:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-21 20:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Apr-21 20:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-21 20:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-21 20:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Apr-21 20:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-21 20:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Apr-21 20:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-21 20:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-21 20:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-21 20:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:50:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-21 20:50:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 0.913 1.092 1.076 2009-Apr-21 20:50:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 1.007 0.894 1.091 2009-Apr-21 20:50:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.901 0.921 1.093 0.949 2009-Apr-21 20:50:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.918 0.104 1.012 0.129 2009-Apr-21 20:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-21 20:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-21 20:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-21 20:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-21 20:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-21 20:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-21 20:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-21 20:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Apr-21 20:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-21 20:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-21 20:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:51:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-21 20:51:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 0.913 1.095 1.078 2009-Apr-21 20:51:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.045 1.005 0.892 1.095 2009-Apr-21 20:51:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.904 0.924 1.095 0.951 2009-Apr-21 20:51:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.104 1.015 0.129 2009-Apr-21 20:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-21 20:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-21 20:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Apr-21 20:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-21 20:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 20:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-21 20:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-21 20:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-21 20:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-21 20:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 20:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-21 20:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Apr-21 20:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-21 20:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-21 20:52:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-21 20:52:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 0.911 1.097 1.080 2009-Apr-21 20:52:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.048 1.009 0.892 1.095 2009-Apr-21 20:52:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.903 0.922 1.096 0.955 2009-Apr-21 20:52:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.104 1.016 0.129 2009-Apr-21 20:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-21 20:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-21 20:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-21 20:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-21 20:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 20:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-21 20:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-21 20:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 20:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-21 20:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 20:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 20:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-21 20:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-21 20:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-21 20:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-21 20:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-21 20:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 20:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-21 20:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 20:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 20:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-21 20:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-21 20:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-21 20:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-21 20:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-21 20:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-21 20:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-21 20:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-21 20:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-21 20:53:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-21 20:53:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.119 0.922 1.105 1.088 2009-Apr-21 20:53:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.044 1.005 0.889 1.092 2009-Apr-21 20:53:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.902 0.922 1.093 0.955 2009-Apr-21 20:53:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.105 1.016 0.129 2009-Apr-21 20:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-21 20:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 20:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-21 20:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 20:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 20:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-21 20:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 20:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-21 20:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-21 20:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 20:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-21 20:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-21 20:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-21 20:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 20:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-21 20:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-21 20:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-21 20:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-21 20:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-21 20:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Apr-21 20:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-21 20:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-21 20:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-21 20:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-21 20:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-21 20:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-21 20:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-21 20:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 20:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 20:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-21 20:54:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-21 20:54:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.109 0.914 1.092 1.079 2009-Apr-21 20:54:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 1.006 0.888 1.091 2009-Apr-21 20:54:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.901 0.922 1.095 0.954 2009-Apr-21 20:54:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.105 1.015 0.129 2009-Apr-21 20:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-21 20:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-21 20:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-21 20:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-21 20:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-21 20:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-21 20:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-21 20:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-21 20:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-21 20:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 20:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-21 20:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-21 20:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-21 20:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-21 20:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-21 20:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-21 20:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.131 (still bad) 2009-Apr-21 20:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.127 (still bad) 2009-Apr-21 20:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.125 (still bad) 2009-Apr-21 20:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.126 (still bad) 2009-Apr-21 20:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-21 20:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-21 20:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-21 20:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 20:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-21 20:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 20:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 20:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-21 20:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-21 20:55:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-21 20:55:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 0.913 1.093 1.081 2009-Apr-21 20:55:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 1.003 0.890 1.094 2009-Apr-21 20:55:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.912 0.932 1.094 0.957 2009-Apr-21 20:55:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.105 1.015 0.130 2009-Apr-21 20:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-21 20:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-21 20:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-21 20:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-21 20:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-21 20:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-21 20:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-21 20:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-21 20:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-21 20:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-21 20:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-21 20:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 20:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-21 20:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-21 20:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-21 20:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-21 20:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-21 20:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 20:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-21 20:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-21 20:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 20:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-21 20:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-21 20:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 20:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-21 20:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 20:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 20:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-21 20:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-21 20:56:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-21 20:56:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 0.909 1.093 1.081 2009-Apr-21 20:56:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 1.003 0.888 1.101 2009-Apr-21 20:56:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.900 0.921 1.094 0.952 2009-Apr-21 20:56:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.105 1.016 0.130 2009-Apr-21 20:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 20:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-21 20:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-21 20:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-21 20:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-21 20:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-21 20:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 20:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 20:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-21 20:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-21 20:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-21 20:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-21 20:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-21 20:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-21 20:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-21 20:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-21 20:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-21 20:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-21 20:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-21 20:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-21 20:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 20:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-21 20:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 20:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 20:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-21 20:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-21 20:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 20:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 20:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-21 20:57:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-21 20:57:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 0.908 1.092 1.082 2009-Apr-21 20:57:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 1.002 0.887 1.100 2009-Apr-21 20:57:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.898 0.921 1.094 0.950 2009-Apr-21 20:57:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.105 1.013 0.129 2009-Apr-21 20:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-21 20:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 20:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 20:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-21 20:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-21 20:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.100 (still bad) 2009-Apr-21 20:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-21 20:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-21 20:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.100 (still bad) 2009-Apr-21 20:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-21 20:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-21 20:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 20:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-21 20:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-21 20:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-21 20:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.121 (still bad) 2009-Apr-21 20:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-21 20:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-21 20:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-21 20:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-21 20:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-21 20:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-21 20:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 20:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-21 20:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 20:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-21 20:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-21 20:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-21 20:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-21 20:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-21 20:58:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-21 20:58:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 0.910 1.094 1.083 2009-Apr-21 20:58:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.051 1.007 0.890 1.097 2009-Apr-21 20:58:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.898 0.921 1.094 0.953 2009-Apr-21 20:58:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.105 1.021 0.129 2009-Apr-21 20:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-21 20:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-21 20:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-21 20:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-21 20:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.100 (still bad) 2009-Apr-21 20:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-21 20:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.100 (still bad) 2009-Apr-21 20:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-21 20:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-21 20:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 20:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 20:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 20:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-21 20:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 20:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-21 20:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-21 20:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-21 20:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-21 20:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-21 20:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-21 20:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.124 (still bad) 2009-Apr-21 20:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-21 20:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Apr-21 20:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.122 (still bad) 2009-Apr-21 20:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-21 20:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-21 20:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Apr-21 20:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-21 20:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-21 20:59:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-21 20:59:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.112 0.921 1.093 1.081 2009-Apr-21 20:59:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 1.004 0.890 1.097 2009-Apr-21 20:59:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.898 0.919 1.099 0.955 2009-Apr-21 20:59:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.105 1.016 0.129 2009-Apr-21 20:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-21 20:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-21 20:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-21 20:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-21 20:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-21 20:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-21 20:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-21 20:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-21 20:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-21 20:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-21 20:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-21 20:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 20:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-21 20:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-21 20:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-21 20:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-21 20:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-21 20:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-21 20:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-21 21:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-21 21:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Apr-21 21:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-21 21:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-21 21:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.122 (still bad) 2009-Apr-21 21:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.123 (still bad) 2009-Apr-21 21:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.124 (still bad) 2009-Apr-21 21:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.125 (still bad) 2009-Apr-21 21:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.125 (still bad) 2009-Apr-21 21:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.122 (still bad) 2009-Apr-21 21:00:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-21 21:00:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.122 0.924 1.092 1.080 2009-Apr-21 21:00:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.036 0.997 0.887 1.095 2009-Apr-21 21:00:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.897 0.920 1.097 0.955 2009-Apr-21 21:00:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.105 1.017 0.129 2009-Apr-21 21:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Apr-21 21:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-21 21:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-21 21:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Apr-21 21:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-21 21:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 21:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 21:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-21 21:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 21:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 21:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 21:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-21 21:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.100 (still bad) 2009-Apr-21 21:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-21 21:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-21 21:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.100 (still bad) 2009-Apr-21 21:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-21 21:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-21 21:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-21 21:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 21:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-21 21:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-21 21:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 21:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-21 21:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 21:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-21 21:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-21 21:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-21 21:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 21:01:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-21 21:01:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 0.907 1.089 1.079 2009-Apr-21 21:01:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 0.999 0.892 1.099 2009-Apr-21 21:01:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.895 0.917 1.094 0.951 2009-Apr-21 21:01:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.105 1.014 0.129 2009-Apr-21 21:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 21:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-21 21:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-21 21:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-21 21:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-21 21:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 21:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-21 21:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-21 21:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 21:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-21 21:01:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-21 21:01:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-21 21:01:43 LOG5 end_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2009-Apr-21 21:01:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-21 21:01:43 LOG5 end_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2009-Apr-21 21:01:43 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Apr-21 21:01:43 LOG5 finish_task: Level: (2) ID = <10203> Status = 0 0 0 0 ok 2009-Apr-21 21:01:43 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-Apr-21 21:01:43 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-21 21:01:43 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-Apr-21 21:01:43 LOG5 end_task: Level: (2) ID = <10203> Status = 0 0 0 0 ok 2009-Apr-21 21:01:43 COMMAND run_command_line: EXECUTING command 33: 'ENDIF' 2009-Apr-21 21:01:43 COMMAND run_command_line: EXECUTING command 36: 'IF LSTSLEW(AGES3193_p2_092) < 103832 THEN' 2009-Apr-21 21:01:44 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_092) < 103832 2009-Apr-21 21:01:44 INFO5 is_if_valid: Condition parsed as: 10.623521 < 10.642222222222221 2009-Apr-21 21:01:44 COMMAND run_command_line: EXECUTING command 37: 'FIXEDDRIFT az=108.76 alfaangle=-88.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_092 ra=95300.00 dec=213630.00' 2009-Apr-21 21:01:44 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-Apr-21 21:01:44 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-21 21:01:44 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 108.76 -88.1 hcorcal 5 tracking no first 1 AGES3193_p2_092 95300.00 213630.00 J 8500.0 Heliocentric velocity(optical)' 2009-Apr-21 21:01:44 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Apr-21 21:01:44 LOG5 begin_task: Level: (2) ID = <10238> Status = 0 0 0 0 ok 2009-Apr-21 21:01:44 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_090' 2009-Apr-21 21:01:44 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Apr-21 21:01:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_092} 2009-Apr-21 21:01:44 INFO3 fixed_driftmap: Sending telescope to Az = 108.76 and ZA = 11.05 2009-Apr-21 21:01:44 LOG3 track_source: Calling 'track_source AGES3193_p2_092 108.76 11.0469447642 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Apr-21 21:01:44 START begin_task: Starting task 'sending tracking commands' 2009-Apr-21 21:01:44 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2009-Apr-21 21:01:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_092} INFO {Slewing to source 'AGES3193_p2_092' ...} 2009-Apr-21 21:01:44 INFO1 track_source: Starting to track AGES3193_p2_092 2009-Apr-21 21:01:44 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_092" 2009-Apr-21 21:01:44 LOG3 vw_send: To DATATAKING: set ra 108.76 2009-Apr-21 21:01:44 LOG3 vw_send: To DATATAKING: set dec 11.0469447642 2009-Apr-21 21:01:44 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-21 21:01:44 LOG3 vw_send: To DATATAKING: pnt tr 108.76 11.0469447642 -CF 2009-Apr-21 21:01:44 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 21:01:44 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-21 21:01:44 LOG5 finish_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2009-Apr-21 21:01:44 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-21 21:01:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-21 21:01:44 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-21 21:01:44 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2009-Apr-21 21:01:44 START begin_task: Starting task 'rotate ALFA to -88.1 degrees' 2009-Apr-21 21:01:44 LOG5 begin_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2009-Apr-21 21:01:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -88.1 degrees ...} 2009-Apr-21 21:01:44 INFO2 rotate_alfa: ALFA commanded to -88.1 degrees 2009-Apr-21 21:01:44 LOG3 sock_errsend: To ALFAMOTOR: POSITION -88.1 REPLY 2009-Apr-21 21:01:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-21 21:01:44 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-21 21:01:44 LOG5 begin_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2009-Apr-21 21:01:44 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_092" 2009-Apr-21 21:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-21 21:01:44 LOG4 got_cormsg: From DATATAKING: set ra 108.76 2009-Apr-21 21:01:44 LOG4 got_cormsg: From DATATAKING: set dec 11.0469447642 2009-Apr-21 21:01:44 LOG4 got_cormsg: From DATATAKING: vw% 108.76 2009-Apr-21 21:01:44 LOG4 got_cormsg: From DATATAKING: vw% 11.0469447642 2009-Apr-21 21:01:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 21:01:44 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-21 21:01:44 LOG4 got_cormsg: From DATATAKING: pnt tr 108.76 11.0469447642 -CF 2009-Apr-21 21:01:44 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Apr-21 21:01:44 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-21 21:01:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 21:01:55 COMMAND CIMA-send_to_exec: Sending command to abort observation 2009-Apr-21 21:01:55 LOG4 exec_msg: From OBSERVER: abort_task abort 2009-Apr-21 21:01:55 WARNING abort_task: WARNING abort requested! 2009-Apr-21 21:01:55 WARNING abort_task: WARNING Aborting wait for waiting on ALFA rotation 2009-Apr-21 21:01:55 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'ABORT' 2009-Apr-21 21:01:55 LOG5 end_task: Level: (4) ID = <10241> Status = 1 0 0 0 abort 2009-Apr-21 21:01:55 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-21 21:01:55 ALERT rotate_alfa: Current ALFA angle is +56.81 degrees! 2009-Apr-21 21:01:55 STOP finish_task: Finishing task 'rotate ALFA to -88.1 degrees' 2009-Apr-21 21:01:55 LOG5 finish_task: Level: (3) ID = <10240> Status = 1 0 0 0 abort 2009-Apr-21 21:01:55 WARNING finish_task: WARNING aborted configuration: rotating ALFA to -88.1 degrees 2009-Apr-21 21:01:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Aborted 2009-Apr-21 21:01:55 STOP end_task: Finishing task 'rotate ALFA to -88.1 degrees' with status 'ABORT' 2009-Apr-21 21:01:55 LOG5 end_task: Level: (3) ID = <10240> Status = 1 0 0 0 abort 2009-Apr-21 21:01:55 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Apr-21 21:01:55 LOG5 finish_task: Level: (2) ID = <10238> Status = 1 0 0 0 abort 2009-Apr-21 21:01:55 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2009-Apr-21 21:01:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2009-Apr-21 21:01:55 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2009-Apr-21 21:01:55 LOG5 end_task: Level: (2) ID = <10238> Status = 1 0 0 0 abort 2009-Apr-21 21:01:55 ALERT run_command_file: Stopping command file processing at line 37! 2009-Apr-21 21:01:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Apr-21 21:01:55 STOP finish_task: Finishing task 'running command file '090421.cmd'' 2009-Apr-21 21:01:55 LOG5 finish_task: Level: (1) ID = <10091> Status = 1 0 0 0 abort 2009-Apr-21 21:01:55 WARNING finish_task: WARNING aborted running: command file '090421.cmd' 2009-Apr-21 21:01:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2009-Apr-21 21:01:55 END end_task: Finishing task 'running command file '090421.cmd'' with status 'ABORT' 2009-Apr-21 21:01:55 LOG5 end_task: Level: (1) ID = <10091> Status = 1 0 0 0 abort 2009-Apr-21 21:01:58 COMMAND CIMA-send_to_exec: Sending command to abort observation 2009-Apr-21 21:01:58 LOG4 exec_msg: From OBSERVER: abort_task abort 2009-Apr-21 21:01:58 WARNING abort_task: WARNING abort requested! 2009-Apr-21 21:02:05 ALERT CIMA-exit_cima: Exiting CIMA ... 2009-Apr-21 21:02:05 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2009-Apr-21 21:02:05 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2009-Apr-21 21:02:05 LOG3 vw_send: To DATATAKING: mvdata a2048 2009-Apr-21 21:02:05 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2009-Apr-21 21:02:05 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2009-Apr-21 21:02:05 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2009-Apr-21 21:02:05 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2009-Apr-21 21:02:05 NOTE CIMA-exit_cima: Cleaning up session ... 2009-Apr-21 21:02:05 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2009-Apr-21 21:02:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 21:02:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-21 21:02:07 LOG3 exec_msg: Closing socket