2009-Mar-18 22:00:16 BEGIN   executive: CIMA executive starting ...
2009-Mar-18 22:00:16 NOTE    executive: STARTING NEW CIMA SESSION
2009-Mar-18 22:00:16 INFO1   executive: Using CIMA version 3.0.10 'normal' from 2008-12-29 17:18
2009-Mar-18 22:00:16 INFO4   executive: This is an ON-LINE session
2009-Mar-18 22:00:16 INFO4   executive: This is a LOCAL session
2009-Mar-18 22:00:16 INFO5   executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours )
2009-Mar-18 22:00:16 INFO1   executive: CIMA session for project 'a2048' in 'line' mode for 'R Minchin'
2009-Mar-18 22:00:16 INFO2   executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20090318'
2009-Mar-18 22:00:17 LOG2    log_preferences: Currently applied preferences:
2009-Mar-18 22:00:17 LOG2    log_preferences:    prefs(dailylog) =           daily
2009-Mar-18 22:00:17 LOG2    log_preferences:    prefs(offlinelog) =         skip
2009-Mar-18 22:00:17 LOG2    log_preferences:    prefs(datawindow) =         ignore
2009-Mar-18 22:00:17 LOG2    log_preferences:    prefs(limitwarning) =       enabled
2009-Mar-18 22:00:17 LOG2    log_preferences:    prefs(wappfailure) =        abort
2009-Mar-18 22:00:17 LOG2    log_preferences:    prefs(helpstyle) =          stay-open
2009-Mar-18 22:00:17 LOG2    log_preferences:    prefs(logcolours) =         full
2009-Mar-18 22:00:17 LOG2    log_preferences:    prefs(displaylevel) =       INFO3
2009-Mar-18 22:00:17 LOG2    log_preferences:    prefs(loglevel) =           LOG5
2009-Mar-18 22:00:17 LOG2    log_preferences:    prefs(displayformat) =      short
2009-Mar-18 22:00:17 LOG2    log_preferences:    prefs(logformat) =          new
2009-Mar-18 22:00:17 LOG2    log_preferences:    prefs(fontsize) =           4
2009-Mar-18 22:00:17 LOG3    vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl
2009-Mar-18 22:00:17 LOG3    vw_send: To DATATAKING: cd /share/obs4/usr/a2048
2009-Mar-18 22:00:17 ALERT   executive: CIMA executive ready
2009-Mar-18 22:00:18 NOTE    frontend: CIMA frontend ready
2009-Mar-18 22:00:23 LOG4    got_cormsg: From DATATAKING: vw% setup
2009-Mar-18 22:00:31 LOG4    got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002
2009-Mar-18 22:00:31 LOG1    got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002'
2009-Mar-18 22:00:31 LOG4    got_cormsg: From DATATAKING: vw% io
2009-Mar-18 22:00:31 LOG4    got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off
2009-Mar-18 22:00:31 LOG4    got_cormsg: From DATATAKING: 
2009-Mar-18 22:00:31 LOG4    got_cormsg: From DATATAKING: vw% tape stat
2009-Mar-18 22:00:31 LOG4    got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003
2009-Mar-18 22:00:31 LOG1    got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003'
2009-Mar-18 22:00:31 LOG4    got_cormsg: From DATATAKING: vw% connectall
2009-Mar-18 22:00:31 LOG4    got_cormsg: From DATATAKING: connected    : prgMgr@cor
2009-Mar-18 22:00:31 LOG4    got_cormsg: From DATATAKING: connected    : prgMgr@corp1
2009-Mar-18 22:00:31 LOG4    got_cormsg: From DATATAKING: connected    : prgMgr@pnt
2009-Mar-18 22:00:31 LOG4    got_cormsg: From DATATAKING: connected    : prgMgr@da
2009-Mar-18 22:00:31 LOG4    got_cormsg: From DATATAKING: connected    : prgMgr@dap1
2009-Mar-18 22:00:31 LOG4    got_cormsg: From DATATAKING: connected    : prgMgr@dap2
2009-Mar-18 22:00:31 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:00:31 LOG4    got_cormsg: From DATATAKING: online.. exit cmd to quit.
2009-Mar-18 22:00:31 LOG4    got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl
2009-Mar-18 22:00:31 LOG4    got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048
2009-Mar-18 22:00:31 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:00:31 LOG4    got_cormsg: From DATATAKING: 
2009-Mar-18 22:00:31 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:00:49 COMMAND CIMA-send_to_exec: Sending command to select new receiver
2009-Mar-18 22:00:49 LOG4    exec_msg: From OBSERVER: select_receiver alfa no no yes
2009-Mar-18 22:00:49 LOG1    select_receiver: Calling 'select_receiver alfa no no yes'
2009-Mar-18 22:00:49 BEGIN   begin_task: Starting task 'selecting receiver ALFA'
2009-Mar-18 22:00:49 LOG5    begin_task: Level: (1)    ID = <10001>    Status = 0 0 0 0  ok
2009-Mar-18 22:00:49 NOTE    select_receiver: Starting to select receiver ALFA
2009-Mar-18 22:00:49 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1    TASKWAIT BITMAP stat_alfa_rot    INFO {Selecting receiver ALFA ...}
2009-Mar-18 22:00:49 LOG3    vw_send: To DATATAKING: setupall alfa 1400.0
2009-Mar-18 22:00:49 LOG3    vw_send: To DATATAKING: acvlbical off
2009-Mar-18 22:00:49 NOTE    select_receiver: Don't forget to choose a source after receiver selection!
2009-Mar-18 22:00:49 STOP    finish_task: Finishing task 'selecting receiver ALFA'
2009-Mar-18 22:00:49 LOG5    finish_task: Level: (1)    ID = <10001>    Status = 0 0 0 0  ok
2009-Mar-18 22:00:49 DONE    finish_task: DONE finished selecting: receiver ALFA
2009-Mar-18 22:00:49 LOG4    send_obs_status: To obs_status: <1> ENDTASK Finished
2009-Mar-18 22:00:49 END     end_task: Finishing task 'selecting receiver ALFA' with status 'OK'
2009-Mar-18 22:00:49 LOG5    end_task: Level: (1)    ID = <10001>    Status = 0 0 0 0  ok
2009-Mar-18 22:00:49 LOG4    got_cormsg: From DATATAKING: setupall alfa 1400.0
2009-Mar-18 22:00:49 LOG4    got_cormsg: From DATATAKING: acvlbical off
2009-Mar-18 22:00:56 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:00:57 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:07 INFO1   CIMA-run_command_file: Transferring command file '090318.cmd ' to executive ...
2009-Mar-18 22:01:07 LOG4    exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf}
2009-Mar-18 22:01:07 LOG4    exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5}
2009-Mar-18 22:01:07 LOG4    exec_msg: From OBSERVER: store_command_file_line 3 5 {CATALOG AGESFull.cat}
2009-Mar-18 22:01:07 LOG4    exec_msg: From OBSERVER: store_command_file_line 4 8 {IF LSTSLEW(AGES3193_p2_032) < 094032 THEN}
2009-Mar-18 22:01:07 LOG4    exec_msg: From OBSERVER: store_command_file_line 5 9 {FIXEDDRIFT az=212.28 alfaangle=-10.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_032 ra=95300.00 dec=230630.00}
2009-Mar-18 22:01:07 LOG4    exec_msg: From OBSERVER: store_command_file_line 6 12 {ENDIF}
2009-Mar-18 22:01:07 LOG4    exec_msg: From OBSERVER: store_command_file_line 7 15 {IF LSTSLEW(AGES3193_p2_034) < 100632 THEN}
2009-Mar-18 22:01:07 LOG4    exec_msg: From OBSERVER: store_command_file_line 8 16 {FIXEDDRIFT az=147.43 alfaangle=48.9  epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_034 ra=95300.00 dec=230330.00}
2009-Mar-18 22:01:07 LOG4    exec_msg: From OBSERVER: store_command_file_line 9 19 {ENDIF}
2009-Mar-18 22:01:07 LOG4    exec_msg: From OBSERVER: store_command_file_line 10 22 {IF LSTSLEW(AGES3193_p2_036) < 102932 THEN}
2009-Mar-18 22:01:07 LOG4    exec_msg: From OBSERVER: store_command_file_line 11 23 {FIXEDDRIFT az=120.23 alfaangle=78.4  epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_036 ra=95300.00 dec=230030.00}
2009-Mar-18 22:01:07 LOG4    exec_msg: From OBSERVER: store_command_file_line 12 26 {ENDIF}
2009-Mar-18 22:01:07 LOG4    exec_msg: From OBSERVER: store_command_file_line 13 29 {IF LSTSLEW(AGES3193_p2_038) < 105232 THEN}
2009-Mar-18 22:01:07 LOG4    exec_msg: From OBSERVER: store_command_file_line 14 30 {FIXEDDRIFT az=110.79 alfaangle=-88.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_038 ra=95300.00 dec=225730.00}
2009-Mar-18 22:01:07 LOG4    exec_msg: From OBSERVER: store_command_file_line 15 33 {ENDIF}
2009-Mar-18 22:01:07 COMMAND CIMA-send_to_exec: Sending command to run command file
2009-Mar-18 22:01:07 LOG4    exec_msg: From OBSERVER: run_command_file 090318.cmd  1 1 15
2009-Mar-18 22:01:07 LOG4    run_command_file: Calling 'run_command_file 090318.cmd 1 1 15'
2009-Mar-18 22:01:07 BEGIN   begin_task: Starting task 'running command file '090318.cmd''
2009-Mar-18 22:01:07 LOG5    begin_task: Level: (1)    ID = <10002>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:07 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Running Command File}    INFO {Running command file '090318.cmd' ...}
2009-Mar-18 22:01:08 NOTE    run_command_file: Starting execution of command file '090318.cmd' from line 1
2009-Mar-18 22:01:08 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf'
2009-Mar-18 22:01:08 LOG1    execute_load: Waiting for CIMA frontend to check the IF/LO file
2009-Mar-18 22:01:08 NOTE    CIMA-check_config_file: File 'ages_config.conf' contains an ALFA set-up which will be ignored!
2009-Mar-18 22:01:08 LOG4    exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok
2009-Mar-18 22:01:08 LOG1    execute_load: Waiting for CIMA frontend to load the IF/LO file
2009-Mar-18 22:01:08 NOTE    CIMA-load_config_file: Loading configuration file 'ages_config.conf'
2009-Mar-18 22:01:08 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes"
2009-Mar-18 22:01:08 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard"
2009-Mar-18 22:01:08 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa"
2009-Mar-18 22:01:08 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no"
2009-Mar-18 22:01:08 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no"
2009-Mar-18 22:01:08 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes"
2009-Mar-18 22:01:08 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA"
2009-Mar-18 22:01:08 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786"
2009-Mar-18 22:01:08 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786"
2009-Mar-18 22:01:08 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786"
2009-Mar-18 22:01:08 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786"
2009-Mar-18 22:01:08 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786"
2009-Mar-18 22:01:08 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786"
2009-Mar-18 22:01:08 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786"
2009-Mar-18 22:01:08 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786"
2009-Mar-18 22:01:08 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786"
2009-Mar-18 22:01:08 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250"
2009-Mar-18 22:01:08 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250"
2009-Mar-18 22:01:08 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250"
2009-Mar-18 22:01:08 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1"
2009-Mar-18 22:01:09 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1"
2009-Mar-18 22:01:10 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level"
2009-Mar-18 22:01:10 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level"
2009-Mar-18 22:01:10 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level"
2009-Mar-18 22:01:10 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level"
2009-Mar-18 22:01:10 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100"
2009-Mar-18 22:01:10 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100"
2009-Mar-18 22:01:10 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100"
2009-Mar-18 22:01:10 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100"
2009-Mar-18 22:01:10 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1"
2009-Mar-18 22:01:10 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1"
2009-Mar-18 22:01:10 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1"
2009-Mar-18 22:01:10 LOG4    exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok
2009-Mar-18 22:01:10 BEGIN   begin_task: Starting task 'configuring IF/LO path'
2009-Mar-18 22:01:10 LOG5    begin_task: Level: (2)    ID = <10003>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:10 INFO1   config_iflo: Starting to configure IF/LO path for ALFA
2009-Mar-18 22:01:10 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT    BITMAP stat_iflo INFO {Setting up the IF/LO path ...}
2009-Mar-18 22:01:10 INFO1   config_iflo: Selecting receiver ALFA
2009-Mar-18 22:01:10 LOG4    send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA}
2009-Mar-18 22:01:10 LOG1    select_receiver: Calling 'select_receiver alfa no no yes'
2009-Mar-18 22:01:10 START   begin_task: Starting task 'selecting receiver ALFA'
2009-Mar-18 22:01:10 LOG5    begin_task: Level: (3)    ID = <10004>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:10 NOTE    select_receiver: Starting to select receiver ALFA
2009-Mar-18 22:01:10 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1    TASKWAIT BITMAP stat_alfa_rot    INFO {Selecting receiver ALFA ...}
2009-Mar-18 22:01:10 LOG3    vw_send: To DATATAKING: setupall alfa 1400.0
2009-Mar-18 22:01:10 LOG3    vw_send: To DATATAKING: acvlbical off
2009-Mar-18 22:01:10 NOTE    select_receiver: Don't forget to choose a source after receiver selection!
2009-Mar-18 22:01:10 STOP    finish_task: Finishing task 'selecting receiver ALFA'
2009-Mar-18 22:01:10 LOG5    finish_task: Level: (3)    ID = <10004>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:10 INFO2   finish_task: DONE finished selecting: receiver ALFA
2009-Mar-18 22:01:10 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:01:10 STOP    end_task: Finishing task 'selecting receiver ALFA' with status 'OK'
2009-Mar-18 22:01:10 LOG5    end_task: Level: (3)    ID = <10004>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:10 START   begin_task: Starting task 'waiting for receiver ALFA'
2009-Mar-18 22:01:10 LOG5    begin_task: Level: (3)    ID = <10005>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:10 STOP    end_task: Finishing task 'waiting for receiver ALFA' with status 'OK'
2009-Mar-18 22:01:10 LOG5    end_task: Level: (3)    ID = <10005>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:10 INFO1   config_iflo: Configuring rest of the IF/LO path
2009-Mar-18 22:01:10 LOG4    send_obs_status: To obs_status: <1> BITMAP stat_iflo    INFO {Configuring rest of the IF/LO path}
2009-Mar-18 22:01:10 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-18 22:01:10 LOG3    socket_wait: To ALFAMON: NOISE ACTIVE
2009-Mar-18 22:01:10 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-18 22:01:10 LOG5    begin_task: Level: (3)    ID = <10006>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:10 LOG4    got_cormsg: From DATATAKING: setupall alfa 1400.0
2009-Mar-18 22:01:10 LOG4    got_cormsg: From DATATAKING: acvlbical off
2009-Mar-18 22:01:10 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-18 22:01:10 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-18 22:01:10 LOG5    end_task: Level: (3)    ID = <10006>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:10 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-18 22:01:10 LOG3    to_alfamon: To ALFAMON: NOISE ACTIVE
2009-Mar-18 22:01:10 LOG3    vw_send: To DATATAKING: alfafb 1
2009-Mar-18 22:01:10 LOG3    vw_send: To DATATAKING: if1 {if1_sbshcl T}
2009-Mar-18 22:01:10 LOG5    send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable
2009-Mar-18 22:01:10 LOG5    send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable
2009-Mar-18 22:01:10 LOG3    vw_send: To DATATAKING: if1 {if1_zmnormal T}
2009-Mar-18 22:01:10 LOG3    vw_send: To DATATAKING: if1 {if1_rfattn 11 11}
2009-Mar-18 22:01:10 LOG3    vw_send: To DATATAKING: if1 {if1_ifnum 6}
2009-Mar-18 22:01:10 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0}
2009-Mar-18 22:01:10 LOG3    vw_send: To DATATAKING: if1 {if1_ifattn 0 0}
2009-Mar-18 22:01:10 LOG3    vw_send: To DATATAKING: if1 {if1_fiber T}
2009-Mar-18 22:01:10 LOG5    send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable
2009-Mar-18 22:01:10 LOG5    send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable
2009-Mar-18 22:01:10 LOG5    send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable
2009-Mar-18 22:01:10 LOG5    send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable
2009-Mar-18 22:01:10 LOG5    send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable
2009-Mar-18 22:01:10 LOG3    vw_send: To DATATAKING: if1 {if1_2to12wb F}
2009-Mar-18 22:01:10 LOG3    vw_send: To DATATAKING: if1 {if1_calrcvr 15}
2009-Mar-18 22:01:10 LOG3    vw_send: To DATATAKING: if2 {if2_xfnormal T}
2009-Mar-18 22:01:10 LOG3    vw_send: To DATATAKING: if2 {if2_sigsrc gr}
2009-Mar-18 22:01:10 LOG3    vw_send: To DATATAKING: if2 {if2_gain 8 8}
2009-Mar-18 22:01:10 LOG3    vw_send: To DATATAKING: if2 {if2_inpfrq alfa}
2009-Mar-18 22:01:10 LOG3    vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750}
2009-Mar-18 22:01:11 LOG5    send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable
2009-Mar-18 22:01:11 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:01:11 LOG3    vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3}
2009-Mar-18 22:01:11 LOG3    vw_send: To DATATAKING: if2 {if2_calsrc 3}
2009-Mar-18 22:01:11 LOG5    send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable
2009-Mar-18 22:01:11 LOG3    vw_send: To DATATAKING: if2 {if2_vis30mhz gr}
2009-Mar-18 22:01:11 LOG3    vw_send: To DATATAKING: if2 {if2_430blnk F}
2009-Mar-18 22:01:11 LOG2    socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE'
2009-Mar-18 22:01:11 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:01:11 START   begin_task: Starting task 'waiting on configuring IF/LO path'
2009-Mar-18 22:01:11 LOG5    begin_task: Level: (3)    ID = <10007>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:11 LOG4    got_cormsg: From DATATAKING: alfafb 1
2009-Mar-18 22:01:11 LOG4    got_cormsg: From DATATAKING: if1 {if1_sbshcl T}
2009-Mar-18 22:01:11 LOG4    got_cormsg: From DATATAKING: if1 {if1_zmnormal T}
2009-Mar-18 22:01:11 LOG4    got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11}
2009-Mar-18 22:01:11 LOG4    got_cormsg: From DATATAKING: if1 {if1_ifnum 6}
2009-Mar-18 22:01:11 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0}
2009-Mar-18 22:01:11 LOG4    got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0}
2009-Mar-18 22:01:11 LOG4    got_cormsg: From DATATAKING: if1 {if1_fiber T}
2009-Mar-18 22:01:11 LOG4    got_cormsg: From DATATAKING: if1 {if1_2to12wb F}
2009-Mar-18 22:01:11 LOG4    got_cormsg: From DATATAKING: if1 {if1_calrcvr 15}
2009-Mar-18 22:01:11 LOG4    got_cormsg: From DATATAKING: if2 {if2_xfnormal T}
2009-Mar-18 22:01:11 LOG4    got_cormsg: From DATATAKING: if2 {if2_sigsrc gr}
2009-Mar-18 22:01:11 LOG4    got_cormsg: From DATATAKING: if2 {if2_gain 8 8}
2009-Mar-18 22:01:11 LOG4    got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa}
2009-Mar-18 22:01:11 LOG4    got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750}
2009-Mar-18 22:01:11 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:01:11 LOG4    got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3}
2009-Mar-18 22:01:11 LOG4    got_cormsg: From DATATAKING: if2 {if2_calsrc 3}
2009-Mar-18 22:01:11 LOG4    got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr}
2009-Mar-18 22:01:11 LOG4    got_cormsg: From DATATAKING: if2 {if2_430blnk F}
2009-Mar-18 22:01:11 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:01:17 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:18 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:18 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:18 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:18 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:19 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:23 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:23 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:24 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:24 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:25 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:25 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:25 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:25 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:25 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:26 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:26 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:26 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:26 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:26 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:26 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:27 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:27 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-18 22:01:27 STOP    end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK'
2009-Mar-18 22:01:27 LOG5    end_task: Level: (3)    ID = <10007>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:27 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path'
2009-Mar-18 22:01:27 STOP    finish_task: Finishing task 'configuring IF/LO path'
2009-Mar-18 22:01:27 LOG5    finish_task: Level: (2)    ID = <10003>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:27 DONE    finish_task: DONE finished configuration: IF/LO path
2009-Mar-18 22:01:27 LOG4    send_obs_status: To obs_status: <1> ENDTASK Finished
2009-Mar-18 22:01:27 END     end_task: Finishing task 'configuring IF/LO path' with status 'OK'
2009-Mar-18 22:01:27 LOG5    end_task: Level: (2)    ID = <10003>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:27 BEGIN   begin_task: Starting task 'configuring WAPPs'
2009-Mar-18 22:01:27 LOG5    begin_task: Level: (2)    ID = <10008>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:27 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr    INFO {Configuring the WAPPs ...}
2009-Mar-18 22:01:27 INFO1   config_wapp_correlator: Starting to configure WAPP as correlator
2009-Mar-18 22:01:27 LOG2    set_cal_source: Setting cal signal control to the WAPPs
2009-Mar-18 22:01:27 START   begin_task: Starting task 'selecting calibration port'
2009-Mar-18 22:01:27 LOG5    begin_task: Level: (3)    ID = <10009>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:27 LOG3    vw_send: To DATATAKING: calport 3
2009-Mar-18 22:01:27 LOG2    socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE'
2009-Mar-18 22:01:27 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:01:27 START   begin_task: Starting task 'waiting on calport'
2009-Mar-18 22:01:27 LOG5    begin_task: Level: (4)    ID = <10010>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:27 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:27 LOG4    got_cormsg: From DATATAKING: calport 3
2009-Mar-18 22:01:27 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:01:27 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:27 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-18 22:01:27 STOP    end_task: Finishing task 'waiting on calport' with status 'OK'
2009-Mar-18 22:01:27 LOG5    end_task: Level: (4)    ID = <10010>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:27 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'calport'
2009-Mar-18 22:01:27 STOP    end_task: Finishing task 'selecting calibration port' with status 'OK'
2009-Mar-18 22:01:27 LOG5    end_task: Level: (3)    ID = <10009>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:27 LOG3    wapp_calcontrol: To CALCONTROL: CALOFF
2009-Mar-18 22:01:27 LOG3    sock_errsend: To CALCONTROL: CALOFF STATUS
2009-Mar-18 22:01:27 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-18 22:01:27 LOG5    begin_task: Level: (3)    ID = <10011>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:27 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-18 22:01:27 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:27 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x02
2009-Mar-18 22:01:27 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-18 22:01:27 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-18 22:01:27 LOG5    end_task: Level: (3)    ID = <10011>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:27 LOG3    send_to_one_wapp: To WAPPCON: VERBOSE 0
2009-Mar-18 22:01:27 LOG3    send_to_one_wapp: To WAPPCON2: VERBOSE 0
2009-Mar-18 22:01:27 LOG3    send_to_one_wapp: To WAPPCON3: VERBOSE 0
2009-Mar-18 22:01:27 LOG3    send_to_one_wapp: To WAPPCON4: VERBOSE 0
2009-Mar-18 22:01:27 LOG3    send_to_one_wapp: To WAPPCON: TIMEOUT 5
2009-Mar-18 22:01:27 LOG3    send_to_one_wapp: To WAPPCON2: TIMEOUT 5
2009-Mar-18 22:01:27 LOG3    send_to_one_wapp: To WAPPCON3: TIMEOUT 5
2009-Mar-18 22:01:27 LOG3    send_to_one_wapp: To WAPPCON4: TIMEOUT 5
2009-Mar-18 22:01:27 LOG3    send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin
2009-Mar-18 22:01:27 LOG3    send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin
2009-Mar-18 22:01:27 LOG3    send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin
2009-Mar-18 22:01:28 LOG3    send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin
2009-Mar-18 22:01:28 LOG3    wapp_calcontrol: To CALCONTROL: TRIGCLOCK
2009-Mar-18 22:01:28 LOG3    sock_errsend: To CALCONTROL: TRIGCLOCK STATUS
2009-Mar-18 22:01:28 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-18 22:01:28 LOG5    begin_task: Level: (3)    ID = <10012>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:28 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-18 22:01:28 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x02
2009-Mar-18 22:01:28 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-18 22:01:28 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-18 22:01:28 LOG5    end_task: Level: (3)    ID = <10012>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:28 LOG3    send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin
2009-Mar-18 22:01:28 LOG3    send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin
2009-Mar-18 22:01:28 LOG3    send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin
2009-Mar-18 22:01:28 LOG3    send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin
2009-Mar-18 22:01:28 STOP    finish_task: Finishing task 'configuring WAPPs'
2009-Mar-18 22:01:28 LOG5    finish_task: Level: (2)    ID = <10008>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:28 DONE    finish_task: DONE finished configuring: the WAPPs in ALFA mode
2009-Mar-18 22:01:28 LOG4    send_obs_status: To obs_status: <1> ENDTASK Finished
2009-Mar-18 22:01:28 END     end_task: Finishing task 'configuring WAPPs' with status 'OK'
2009-Mar-18 22:01:28 LOG5    end_task: Level: (2)    ID = <10008>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:28 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5'
2009-Mar-18 22:01:28 COMMAND run_command_line: EXECUTING command 5: 'CATALOG AGESFull.cat'
2009-Mar-18 22:01:28 INFO1   execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat'
2009-Mar-18 22:01:28 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGES3193_p2_032) < 094032 THEN'
2009-Mar-18 22:01:28 INFO5   is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_032) < 094032
2009-Mar-18 22:01:28 INFO5   is_if_valid: Condition parsed as: 9.4460083333333333 < 9.6755555555555546
2009-Mar-18 22:01:28 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=212.28 alfaangle=-10.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_032 ra=95300.00 dec=230630.00'
2009-Mar-18 22:01:28 LOG2    check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map'
2009-Mar-18 22:01:28 NOTE    WAPPDATA-new_file: New FITS file: wapp.20090318.a2048.0000.fits
2009-Mar-18 22:01:29 LOG4    WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin'
2009-Mar-18 22:01:29 LOG4    WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0'
2009-Mar-18 22:01:29 LOG4    WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5'
2009-Mar-18 22:01:29 LOG4    send_obs_status: To obs_status: <1> FILENAME {wapp.20090318.a2048.0000.fits}
2009-Mar-18 22:01:29 LOG4    WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin'
2009-Mar-18 22:01:29 LOG4    exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok
2009-Mar-18 22:01:29 LOG1    fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 212.28 -10.4 hcorcal 5 tracking no first 1 AGES3193_p2_032 95300.00 230630.00 J 8500.0 Heliocentric velocity(optical)'
2009-Mar-18 22:01:29 BEGIN   begin_task: Starting task 'fixed azimuth drift map'
2009-Mar-18 22:01:29 LOG5    begin_task: Level: (2)    ID = <10013>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:29 INFO4   begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AUDSGAL2577'
2009-Mar-18 22:01:29 INFO1   fixed_driftmap: Starting pattern: Fixed azimuth drift map
2009-Mar-18 22:01:29 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1    INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_032}
2009-Mar-18 22:01:29 INFO3   fixed_driftmap: Sending telescope to Az = 212.28 and ZA = 5.60
2009-Mar-18 22:01:29 LOG3    track_source: Calling 'track_source AGES3193_p2_032 212.28 5.6045069875 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)'
2009-Mar-18 22:01:29 START   begin_task: Starting task 'sending tracking commands'
2009-Mar-18 22:01:29 LOG5    begin_task: Level: (3)    ID = <10014>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:29 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_032}    INFO {Slewing to source 'AGES3193_p2_032' ...}
2009-Mar-18 22:01:29 INFO1   track_source: Starting to track AGES3193_p2_032
2009-Mar-18 22:01:29 LOG3    vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_032"
2009-Mar-18 22:01:29 LOG3    vw_send: To DATATAKING: set ra 212.28
2009-Mar-18 22:01:29 LOG3    vw_send: To DATATAKING: set dec 5.6045069875
2009-Mar-18 22:01:29 LOG3    vw_send: To DATATAKING: pnt tr send
2009-Mar-18 22:01:29 LOG3    vw_send: To DATATAKING: pnt tr 212.28 5.6045069875 -CF
2009-Mar-18 22:01:29 LOG3    vw_send: To DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 22:01:29 STOP    finish_task: Finishing task 'sending tracking commands'
2009-Mar-18 22:01:29 LOG5    finish_task: Level: (3)    ID = <10014>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:29 INFO2   finish_task: DONE finished sending: tracking commands
2009-Mar-18 22:01:29 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:01:29 STOP    end_task: Finishing task 'sending tracking commands' with status 'OK'
2009-Mar-18 22:01:29 LOG5    end_task: Level: (3)    ID = <10014>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:29 START   begin_task: Starting task 'rotate ALFA to -10.4 degrees'
2009-Mar-18 22:01:29 LOG5    begin_task: Level: (3)    ID = <10015>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:29 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA}    INFO {Rotating ALFA to -10.4 degrees ...}
2009-Mar-18 22:01:29 INFO2   rotate_alfa: ALFA commanded to -10.4 degrees
2009-Mar-18 22:01:30 LOG3    sock_errsend: To ALFAMOTOR: POSITION -10.4 REPLY
2009-Mar-18 22:01:30 LOG4    send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...}
2009-Mar-18 22:01:30 START   begin_task: Starting task 'waiting on ALFA rotation'
2009-Mar-18 22:01:30 LOG5    begin_task: Level: (4)    ID = <10016>    Status = 0 0 0 0  ok
2009-Mar-18 22:01:30 LOG4    got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_032"
2009-Mar-18 22:01:30 LOG4    got_cormsg: From DATATAKING: set ra 212.28
2009-Mar-18 22:01:30 LOG4    got_cormsg: From DATATAKING: set dec 5.6045069875
2009-Mar-18 22:01:30 LOG4    got_cormsg: From DATATAKING: vw% 212.28
2009-Mar-18 22:01:30 LOG4    got_cormsg: From DATATAKING: vw% 5.6045069875
2009-Mar-18 22:01:30 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:01:30 LOG4    got_cormsg: From DATATAKING: pnt tr send
2009-Mar-18 22:01:30 LOG4    got_cormsg: From DATATAKING: pnt tr 212.28 5.6045069875 -CF
2009-Mar-18 22:01:30 LOG4    got_cormsg: From DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 22:01:30 LOG4    got_cormsg: From DATATAKING: vw% vw%
2009-Mar-18 22:01:30 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:02:27 LOG4    exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION"
2009-Mar-18 22:02:27 INFO3   alfa_motor: ALFA rotator in-position -10.40 degrees
2009-Mar-18 22:02:27 STOP    end_task: Finishing task 'waiting on ALFA rotation' with status 'OK'
2009-Mar-18 22:02:27 LOG5    end_task: Level: (4)    ID = <10016>    Status = 0 0 0 0  ok
2009-Mar-18 22:02:27 LOG4    send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy
2009-Mar-18 22:02:27 STOP    finish_task: Finishing task 'rotate ALFA to -10.4 degrees'
2009-Mar-18 22:02:27 LOG5    finish_task: Level: (3)    ID = <10015>    Status = 0 0 0 0  ok
2009-Mar-18 22:02:27 INFO2   finish_task: DONE finished configuration: rotating ALFA to -10.4 degrees
2009-Mar-18 22:02:27 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:02:27 STOP    end_task: Finishing task 'rotate ALFA to -10.4 degrees' with status 'OK'
2009-Mar-18 22:02:27 LOG5    end_task: Level: (3)    ID = <10015>    Status = 0 0 0 0  ok
2009-Mar-18 22:02:27 START   begin_task: Starting task 'waiting on telescope'
2009-Mar-18 22:02:27 LOG5    begin_task: Level: (3)    ID = <10017>    Status = 0 0 0 0  ok
2009-Mar-18 22:02:27 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew    INFO {Waiting for telescope to track source ...}
2009-Mar-18 22:02:27 LOG3    waittrk: Start waittrk 5
2009-Mar-18 22:02:27 START   begin_task: Starting task 'waiting on telescope movement'
2009-Mar-18 22:02:27 LOG5    begin_task: Level: (4)    ID = <10018>    Status = 0 0 0 0  ok
2009-Mar-18 22:02:32 STOP    end_task: Finishing task 'waiting on telescope movement' with status 'OK'
2009-Mar-18 22:02:32 LOG5    end_task: Level: (4)    ID = <10018>    Status = 0 0 0 0  ok
2009-Mar-18 22:02:32 START   begin_task: Starting task 'waiting on telescope on source'
2009-Mar-18 22:02:32 LOG5    begin_task: Level: (4)    ID = <10019>    Status = 0 0 0 0  ok
2009-Mar-18 22:05:50 STOP    end_task: Finishing task 'waiting on telescope on source' with status 'OK'
2009-Mar-18 22:05:50 LOG5    end_task: Level: (4)    ID = <10019>    Status = 0 0 0 0  ok
2009-Mar-18 22:05:50 LOG4    send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy
2009-Mar-18 22:05:50 INFO2   waittrk: Now tracking AGES3193_p2_032
2009-Mar-18 22:05:50 LOG4    waittrk: Current telescope position:  Az = 211.87  ZA = 5.62
2009-Mar-18 22:05:50 STOP    finish_task: Finishing task 'waiting on telescope'
2009-Mar-18 22:05:50 LOG5    finish_task: Level: (3)    ID = <10017>    Status = 0 0 0 0  ok
2009-Mar-18 22:05:50 INFO2   finish_task: DONE finished waiting: telescope on source
2009-Mar-18 22:05:50 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:05:50 STOP    end_task: Finishing task 'waiting on telescope' with status 'OK'
2009-Mar-18 22:05:50 LOG5    end_task: Level: (3)    ID = <10017>    Status = 0 0 0 0  ok
2009-Mar-18 22:05:50 START   begin_task: Starting task 'selecting calibration type'
2009-Mar-18 22:05:50 LOG5    begin_task: Level: (3)    ID = <10020>    Status = 0 0 0 0  ok
2009-Mar-18 22:05:50 LOG3    vw_send: To DATATAKING: setcal hcorcal
2009-Mar-18 22:05:50 LOG2    socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE'
2009-Mar-18 22:05:50 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:05:50 START   begin_task: Starting task 'waiting on setcal'
2009-Mar-18 22:05:50 LOG5    begin_task: Level: (4)    ID = <10021>    Status = 0 0 0 0  ok
2009-Mar-18 22:05:50 LOG4    got_cormsg: From DATATAKING: setcal hcorcal
2009-Mar-18 22:05:50 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:05:50 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:05:50 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-18 22:05:50 STOP    end_task: Finishing task 'waiting on setcal' with status 'OK'
2009-Mar-18 22:05:50 LOG5    end_task: Level: (4)    ID = <10021>    Status = 0 0 0 0  ok
2009-Mar-18 22:05:50 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'setcal'
2009-Mar-18 22:05:50 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-18 22:05:50 LOG3    socket_wait: To ALFAMON: CAL HI
2009-Mar-18 22:05:50 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-18 22:05:50 LOG5    begin_task: Level: (4)    ID = <10022>    Status = 0 0 0 0  ok
2009-Mar-18 22:05:50 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-18 22:05:50 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-18 22:05:50 LOG5    end_task: Level: (4)    ID = <10022>    Status = 0 0 0 0  ok
2009-Mar-18 22:05:50 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-18 22:05:50 LOG3    to_alfamon: To ALFAMON: CAL HI
2009-Mar-18 22:05:50 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-18 22:05:51 LOG3    socket_wait: To ALFAMON: NOISE ACTIVE
2009-Mar-18 22:05:51 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-18 22:05:51 LOG5    begin_task: Level: (4)    ID = <10023>    Status = 0 0 0 0  ok
2009-Mar-18 22:05:51 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:05:51 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-18 22:05:51 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-18 22:05:51 LOG5    end_task: Level: (4)    ID = <10023>    Status = 0 0 0 0  ok
2009-Mar-18 22:05:51 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-18 22:05:51 LOG3    to_alfamon: To ALFAMON: NOISE ACTIVE
2009-Mar-18 22:05:51 STOP    end_task: Finishing task 'selecting calibration type' with status 'OK'
2009-Mar-18 22:05:51 LOG5    end_task: Level: (3)    ID = <10020>    Status = 0 0 0 0  ok
2009-Mar-18 22:05:51 LOG4    send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time}
2009-Mar-18 22:05:51 INFO2   astwait: Waiting for 819 seconds from 02:05:51 to 02:19:30 UTC ...
2009-Mar-18 22:05:51 LOG4    send_obs_status: To obs_status: <1> TASKTIME 819 BITMAP stat_wait MESSAGE {Waiting ...}
2009-Mar-18 22:05:51 START   begin_task: Starting task 'waiting on waiting for AST time'
2009-Mar-18 22:05:51 LOG5    begin_task: Level: (3)    ID = <10024>    Status = 0 0 0 0  ok
2009-Mar-18 22:07:51 COMMAND CIMA-send_to_exec: Sending command to abort observation
2009-Mar-18 22:07:51 LOG4    exec_msg: From OBSERVER: abort_task abort
2009-Mar-18 22:07:51 WARNING abort_task: WARNING abort requested!
2009-Mar-18 22:07:51 WARNING abort_task: WARNING Aborting wait for waiting on waiting for AST time
2009-Mar-18 22:07:51 STOP    end_task: Finishing task 'waiting on waiting for AST time' with status 'ABORT'
2009-Mar-18 22:07:51 LOG5    end_task: Level: (3)    ID = <10024>    Status = 1 0 0 0  abort
2009-Mar-18 22:07:51 LOG4    send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy
2009-Mar-18 22:07:51 STOP    finish_task: Finishing task 'fixed azimuth drift map'
2009-Mar-18 22:07:51 LOG5    finish_task: Level: (2)    ID = <10013>    Status = 1 0 0 0  abort
2009-Mar-18 22:07:51 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map
2009-Mar-18 22:07:51 LOG4    send_obs_status: To obs_status: <1> ENDTASK Aborted
2009-Mar-18 22:07:51 END     end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT'
2009-Mar-18 22:07:51 LOG5    end_task: Level: (2)    ID = <10013>    Status = 1 0 0 0  abort
2009-Mar-18 22:07:51 ALERT   run_command_file: Stopping command file processing at line 9!
2009-Mar-18 22:07:51 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Running Command File}
2009-Mar-18 22:07:51 STOP    finish_task: Finishing task 'running command file '090318.cmd''
2009-Mar-18 22:07:51 LOG5    finish_task: Level: (1)    ID = <10002>    Status = 1 0 0 0  abort
2009-Mar-18 22:07:51 WARNING finish_task: WARNING aborted running: command file '090318.cmd'
2009-Mar-18 22:07:51 LOG4    send_obs_status: To obs_status: <1> ENDTASK Aborted
2009-Mar-18 22:07:51 END     end_task: Finishing task 'running command file '090318.cmd'' with status 'ABORT'
2009-Mar-18 22:07:51 LOG5    end_task: Level: (1)    ID = <10002>    Status = 1 0 0 0  abort
2009-Mar-18 22:08:05 INFO1   CIMA-run_command_file: Transferring command file 'command_galfacurpos.cmd ' to executive ...
2009-Mar-18 22:08:05 LOG4    exec_msg: From OBSERVER: store_command_file_line 1 7 {LOAD togs_ages.conf}
2009-Mar-18 22:08:05 LOG4    exec_msg: From OBSERVER: store_command_file_line 2 8 {TRACKCURPOS}
2009-Mar-18 22:08:05 LOG4    exec_msg: From OBSERVER: store_command_file_line 3 9 {ALFAANGLE 19}
2009-Mar-18 22:08:05 LOG4    exec_msg: From OBSERVER: store_command_file_line 4 13 {SMARTFREQ  secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}}
2009-Mar-18 22:08:05 COMMAND CIMA-send_to_exec: Sending command to run command file
2009-Mar-18 22:08:05 LOG4    exec_msg: From OBSERVER: run_command_file command_galfacurpos.cmd  1 1 4
2009-Mar-18 22:08:05 LOG4    run_command_file: Calling 'run_command_file command_galfacurpos.cmd 1 1 4'
2009-Mar-18 22:08:05 BEGIN   begin_task: Starting task 'running command file 'command_galfacurpos.cmd''
2009-Mar-18 22:08:05 LOG5    begin_task: Level: (1)    ID = <10025>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:05 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Running Command File}    INFO {Running command file 'command_galfacurpos.cmd' ...}
2009-Mar-18 22:08:05 NOTE    run_command_file: Starting execution of command file 'command_galfacurpos.cmd' from line 1
2009-Mar-18 22:08:05 COMMAND run_command_line: EXECUTING command 7: 'LOAD togs_ages.conf'
2009-Mar-18 22:08:05 LOG1    execute_load: Waiting for CIMA frontend to check the IF/LO file
2009-Mar-18 22:08:05 NOTE    CIMA-check_config_file: File 'togs_ages.conf' contains a observing mode set-up which will be ignored!
2009-Mar-18 22:08:05 LOG4    exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok
2009-Mar-18 22:08:05 LOG1    execute_load: Waiting for CIMA frontend to load the IF/LO file
2009-Mar-18 22:08:06 NOTE    CIMA-load_config_file: Loading configuration file 'togs_ages.conf'
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1"
2009-Mar-18 22:08:06 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1"
2009-Mar-18 22:08:07 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1"
2009-Mar-18 22:08:08 LOG4    exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok
2009-Mar-18 22:08:08 BEGIN   begin_task: Starting task 'configuring IF/LO path'
2009-Mar-18 22:08:08 LOG5    begin_task: Level: (2)    ID = <10026>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:08 INFO1   config_iflo: Starting to configure IF/LO path for ALFA
2009-Mar-18 22:08:08 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT    BITMAP stat_iflo INFO {Setting up the IF/LO path ...}
2009-Mar-18 22:08:08 LOG1    config_iflo: Receiver ALFA already selected
2009-Mar-18 22:08:08 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-18 22:08:08 LOG3    socket_wait: To ALFAMON: NOISE ACTIVE
2009-Mar-18 22:08:08 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-18 22:08:08 LOG5    begin_task: Level: (3)    ID = <10027>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:08 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-18 22:08:08 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-18 22:08:08 LOG5    end_task: Level: (3)    ID = <10027>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:08 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-18 22:08:08 LOG3    to_alfamon: To ALFAMON: NOISE ACTIVE
2009-Mar-18 22:08:08 LOG3    config_iflo: Skipping filter command 'alfafb 1' since system already is properly set
2009-Mar-18 22:08:08 LOG3    send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set
2009-Mar-18 22:08:08 LOG5    send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable
2009-Mar-18 22:08:08 LOG5    send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable
2009-Mar-18 22:08:08 LOG3    send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set
2009-Mar-18 22:08:08 LOG3    send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set
2009-Mar-18 22:08:08 LOG3    send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set
2009-Mar-18 22:08:08 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0}
2009-Mar-18 22:08:08 LOG3    send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set
2009-Mar-18 22:08:08 LOG3    send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set
2009-Mar-18 22:08:08 LOG5    send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable
2009-Mar-18 22:08:08 LOG5    send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable
2009-Mar-18 22:08:08 LOG5    send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable
2009-Mar-18 22:08:08 LOG5    send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable
2009-Mar-18 22:08:08 LOG5    send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable
2009-Mar-18 22:08:08 LOG3    send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set
2009-Mar-18 22:08:08 LOG3    send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set
2009-Mar-18 22:08:08 LOG3    send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set
2009-Mar-18 22:08:08 LOG3    send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set
2009-Mar-18 22:08:08 LOG3    send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set
2009-Mar-18 22:08:08 LOG3    send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set
2009-Mar-18 22:08:08 LOG3    send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set
2009-Mar-18 22:08:08 LOG5    send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable
2009-Mar-18 22:08:08 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:08:08 LOG3    send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set
2009-Mar-18 22:08:08 LOG3    send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set
2009-Mar-18 22:08:08 LOG5    send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable
2009-Mar-18 22:08:08 LOG3    send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set
2009-Mar-18 22:08:08 LOG3    send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set
2009-Mar-18 22:08:08 LOG2    socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE'
2009-Mar-18 22:08:08 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:08:08 START   begin_task: Starting task 'waiting on configuring IF/LO path'
2009-Mar-18 22:08:08 LOG5    begin_task: Level: (3)    ID = <10028>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:08 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0}
2009-Mar-18 22:08:08 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:08:08 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:08:08 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:08:08 LOG4    got_cormsg: From DATATAKING: vw% DONE
2009-Mar-18 22:08:08 STOP    end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK'
2009-Mar-18 22:08:08 LOG5    end_task: Level: (3)    ID = <10028>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:08 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path'
2009-Mar-18 22:08:08 STOP    finish_task: Finishing task 'configuring IF/LO path'
2009-Mar-18 22:08:08 LOG5    finish_task: Level: (2)    ID = <10026>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:08 DONE    finish_task: DONE finished configuration: IF/LO path
2009-Mar-18 22:08:08 LOG4    send_obs_status: To obs_status: <1> ENDTASK Finished
2009-Mar-18 22:08:08 END     end_task: Finishing task 'configuring IF/LO path' with status 'OK'
2009-Mar-18 22:08:08 LOG5    end_task: Level: (2)    ID = <10026>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:08 BEGIN   begin_task: Starting task 'configuring WAPPs'
2009-Mar-18 22:08:08 LOG5    begin_task: Level: (2)    ID = <10029>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:08 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr    INFO {Configuring the WAPPs ...}
2009-Mar-18 22:08:08 INFO1   config_wapp_correlator: Starting to configure WAPP as correlator
2009-Mar-18 22:08:08 LOG2    set_cal_source: Setting cal signal control to the WAPPs
2009-Mar-18 22:08:08 START   begin_task: Starting task 'selecting calibration port'
2009-Mar-18 22:08:08 LOG5    begin_task: Level: (3)    ID = <10030>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:08 LOG3    vw_send: To DATATAKING: calport 3
2009-Mar-18 22:08:08 LOG2    socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE'
2009-Mar-18 22:08:08 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:08:08 START   begin_task: Starting task 'waiting on calport'
2009-Mar-18 22:08:08 LOG5    begin_task: Level: (4)    ID = <10031>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:08 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:08:08 LOG4    got_cormsg: From DATATAKING: calport 3
2009-Mar-18 22:08:08 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:08:09 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:08:09 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-18 22:08:09 STOP    end_task: Finishing task 'waiting on calport' with status 'OK'
2009-Mar-18 22:08:09 LOG5    end_task: Level: (4)    ID = <10031>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:09 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'calport'
2009-Mar-18 22:08:09 STOP    end_task: Finishing task 'selecting calibration port' with status 'OK'
2009-Mar-18 22:08:09 LOG5    end_task: Level: (3)    ID = <10030>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:09 LOG3    wapp_calcontrol: To CALCONTROL: CALOFF
2009-Mar-18 22:08:09 LOG3    sock_errsend: To CALCONTROL: CALOFF STATUS
2009-Mar-18 22:08:09 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-18 22:08:09 LOG5    begin_task: Level: (3)    ID = <10032>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:09 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:08:09 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-18 22:08:09 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x02
2009-Mar-18 22:08:09 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-18 22:08:09 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-18 22:08:09 LOG5    end_task: Level: (3)    ID = <10032>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:09 LOG3    send_to_one_wapp: To WAPPCON: VERBOSE 0
2009-Mar-18 22:08:09 LOG3    send_to_one_wapp: To WAPPCON2: VERBOSE 0
2009-Mar-18 22:08:09 LOG3    send_to_one_wapp: To WAPPCON3: VERBOSE 0
2009-Mar-18 22:08:09 LOG3    send_to_one_wapp: To WAPPCON4: VERBOSE 0
2009-Mar-18 22:08:09 LOG3    send_to_one_wapp: To WAPPCON: TIMEOUT 5
2009-Mar-18 22:08:09 LOG3    send_to_one_wapp: To WAPPCON2: TIMEOUT 5
2009-Mar-18 22:08:09 LOG3    send_to_one_wapp: To WAPPCON3: TIMEOUT 5
2009-Mar-18 22:08:09 LOG3    send_to_one_wapp: To WAPPCON4: TIMEOUT 5
2009-Mar-18 22:08:09 LOG3    send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin
2009-Mar-18 22:08:09 LOG3    send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin
2009-Mar-18 22:08:09 LOG3    send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin
2009-Mar-18 22:08:09 LOG3    send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin
2009-Mar-18 22:08:09 LOG3    wapp_calcontrol: To CALCONTROL: TRIGCLOCK
2009-Mar-18 22:08:09 LOG3    sock_errsend: To CALCONTROL: TRIGCLOCK STATUS
2009-Mar-18 22:08:09 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-18 22:08:09 LOG5    begin_task: Level: (3)    ID = <10033>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:09 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-18 22:08:09 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x02
2009-Mar-18 22:08:09 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-18 22:08:09 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-18 22:08:09 LOG5    end_task: Level: (3)    ID = <10033>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:09 LOG3    sock_errsend: To WAPPDATA: FLUSH
2009-Mar-18 22:08:09 STOP    finish_task: Finishing task 'configuring WAPPs'
2009-Mar-18 22:08:09 LOG5    finish_task: Level: (2)    ID = <10029>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:09 DONE    finish_task: DONE finished configuring: the WAPPs in ALFA mode
2009-Mar-18 22:08:09 LOG4    send_obs_status: To obs_status: <1> ENDTASK Finished
2009-Mar-18 22:08:09 END     end_task: Finishing task 'configuring WAPPs' with status 'OK'
2009-Mar-18 22:08:09 LOG5    end_task: Level: (2)    ID = <10029>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:09 COMMAND run_command_line: EXECUTING command 8: 'TRACKCURPOS'
2009-Mar-18 22:08:09 BEGIN   begin_task: Starting task 'tracking current position'
2009-Mar-18 22:08:09 LOG5    begin_task: Level: (2)    ID = <10034>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:09 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position}    INFO {Tracking current position ...}
2009-Mar-18 22:08:09 INFO1   track_current_pos: Starting to track the current commanded position RA = 09:40:38.0 and Dec = +23:06:24.1
2009-Mar-18 22:08:09 LOG3    track_source: Calling 'track_source Cur-pos 094038.0 230624.1 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)'
2009-Mar-18 22:08:09 START   begin_task: Starting task 'sending tracking commands'
2009-Mar-18 22:08:09 LOG5    begin_task: Level: (3)    ID = <10035>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:09 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos}    INFO {Slewing to source 'Cur-pos' ...}
2009-Mar-18 22:08:09 INFO1   track_source: Starting to track Cur-pos
2009-Mar-18 22:08:09 LOG3    vw_send: To DATATAKING: hdrldsrcnm "Cur-pos"
2009-Mar-18 22:08:09 LOG3    vw_send: To DATATAKING: set ra 094038.0
2009-Mar-18 22:08:09 LOG3    vw_send: To DATATAKING: set dec 230624.1
2009-Mar-18 22:08:09 LOG3    vw_send: To DATATAKING: pnt tr send
2009-Mar-18 22:08:09 LOG3    vw_send: To DATATAKING: pnt tr 094038.0 230624.1 -CJ
2009-Mar-18 22:08:10 LOG3    vw_send: To DATATAKING: dopsetvel 0 topo
2009-Mar-18 22:08:10 STOP    finish_task: Finishing task 'sending tracking commands'
2009-Mar-18 22:08:10 LOG5    finish_task: Level: (3)    ID = <10035>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:10 INFO2   finish_task: DONE finished sending: tracking commands
2009-Mar-18 22:08:10 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:08:10 STOP    end_task: Finishing task 'sending tracking commands' with status 'OK'
2009-Mar-18 22:08:10 LOG5    end_task: Level: (3)    ID = <10035>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:10 START   begin_task: Starting task 'waiting on telescope'
2009-Mar-18 22:08:10 LOG5    begin_task: Level: (3)    ID = <10036>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:10 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew    INFO {Waiting for telescope to track source ...}
2009-Mar-18 22:08:10 LOG3    waittrk: Start waittrk 5
2009-Mar-18 22:08:10 START   begin_task: Starting task 'waiting on telescope movement'
2009-Mar-18 22:08:10 LOG5    begin_task: Level: (4)    ID = <10037>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:10 INFO1   WAPPDATA-flush_pending: WAPPDATA ready
2009-Mar-18 22:08:10 LOG4    got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos"
2009-Mar-18 22:08:10 LOG4    WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0'
2009-Mar-18 22:08:10 LOG4    WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5'
2009-Mar-18 22:08:10 LOG4    WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin'
2009-Mar-18 22:08:10 LOG4    got_cormsg: From DATATAKING: set ra 094038.0
2009-Mar-18 22:08:10 LOG4    got_cormsg: From DATATAKING: set dec 230624.1
2009-Mar-18 22:08:10 LOG4    got_cormsg: From DATATAKING: vw% 094038.0
2009-Mar-18 22:08:10 LOG4    got_cormsg: From DATATAKING: vw% 230624.1
2009-Mar-18 22:08:10 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:08:10 LOG4    got_cormsg: From DATATAKING: pnt tr send
2009-Mar-18 22:08:10 LOG4    got_cormsg: From DATATAKING: pnt tr 094038.0 230624.1 -CJ
2009-Mar-18 22:08:10 LOG4    got_cormsg: From DATATAKING: dopsetvel 0 topo
2009-Mar-18 22:08:10 LOG4    got_cormsg: From DATATAKING: vw% vw%
2009-Mar-18 22:08:10 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:08:15 STOP    end_task: Finishing task 'waiting on telescope movement' with status 'OK'
2009-Mar-18 22:08:15 LOG5    end_task: Level: (4)    ID = <10037>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:15 START   begin_task: Starting task 'waiting on telescope on source'
2009-Mar-18 22:08:15 LOG5    begin_task: Level: (4)    ID = <10038>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:20 STOP    end_task: Finishing task 'waiting on telescope on source' with status 'OK'
2009-Mar-18 22:08:20 LOG5    end_task: Level: (4)    ID = <10038>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:20 LOG4    send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy
2009-Mar-18 22:08:20 INFO2   waittrk: Now tracking Cur-pos
2009-Mar-18 22:08:20 LOG4    waittrk: Current telescope position:  Az = 211.51  ZA = 5.60
2009-Mar-18 22:08:20 STOP    finish_task: Finishing task 'waiting on telescope'
2009-Mar-18 22:08:20 LOG5    finish_task: Level: (3)    ID = <10036>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:20 INFO2   finish_task: DONE finished waiting: telescope on source
2009-Mar-18 22:08:20 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:08:20 STOP    end_task: Finishing task 'waiting on telescope' with status 'OK'
2009-Mar-18 22:08:20 LOG5    end_task: Level: (3)    ID = <10036>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:20 STOP    finish_task: Finishing task 'tracking current position'
2009-Mar-18 22:08:20 LOG5    finish_task: Level: (2)    ID = <10034>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:20 DONE    finish_task: DONE finished tracking: current position
2009-Mar-18 22:08:20 LOG4    send_obs_status: To obs_status: <1> ENDTASK Finished
2009-Mar-18 22:08:20 END     end_task: Finishing task 'tracking current position' with status 'OK'
2009-Mar-18 22:08:20 LOG5    end_task: Level: (2)    ID = <10034>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:20 COMMAND run_command_line: EXECUTING command 9: 'ALFAANGLE 19'
2009-Mar-18 22:08:20 INFO1   execute_alfaangle: Setting the ALFA rotation angle to 19
2009-Mar-18 22:08:20 BEGIN   begin_task: Starting task 'rotate ALFA to +19 degrees'
2009-Mar-18 22:08:20 LOG5    begin_task: Level: (2)    ID = <10039>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:20 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA}    INFO {Rotating ALFA to +19 degrees ...}
2009-Mar-18 22:08:20 INFO2   rotate_alfa: ALFA commanded to +19.0 degrees
2009-Mar-18 22:08:20 LOG3    sock_errsend: To ALFAMOTOR: POSITION 19 REPLY
2009-Mar-18 22:08:20 LOG4    send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...}
2009-Mar-18 22:08:20 START   begin_task: Starting task 'waiting on ALFA rotation'
2009-Mar-18 22:08:20 LOG5    begin_task: Level: (3)    ID = <10040>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:38 LOG4    exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION"
2009-Mar-18 22:08:38 INFO3   alfa_motor: ALFA rotator in-position +19.00 degrees
2009-Mar-18 22:08:38 STOP    end_task: Finishing task 'waiting on ALFA rotation' with status 'OK'
2009-Mar-18 22:08:38 LOG5    end_task: Level: (3)    ID = <10040>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:38 LOG4    send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy
2009-Mar-18 22:08:38 STOP    finish_task: Finishing task 'rotate ALFA to +19 degrees'
2009-Mar-18 22:08:38 LOG5    finish_task: Level: (2)    ID = <10039>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:38 DONE    finish_task: DONE finished configuration: rotating ALFA to +19 degrees
2009-Mar-18 22:08:38 LOG4    send_obs_status: To obs_status: <1> ENDTASK Finished
2009-Mar-18 22:08:38 END     end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK'
2009-Mar-18 22:08:38 LOG5    end_task: Level: (2)    ID = <10039>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:38 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ  secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}'
2009-Mar-18 22:08:38 LOG2    check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching'
2009-Mar-18 22:08:38 LOG4    exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok
2009-Mar-18 22:08:38 LOG1    smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}'
2009-Mar-18 22:08:38 BEGIN   begin_task: Starting task 'smart frequency switching'
2009-Mar-18 22:08:38 LOG5    begin_task: Level: (2)    ID = <10041>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:38 INFO4   begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos'
2009-Mar-18 22:08:38 INFO1   smartfreq: Starting pattern: Smart frequency switching
2009-Mar-18 22:08:38 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2    INFO {Starting smart frequency switching obs. ...}
2009-Mar-18 22:08:38 START   begin_task: Starting task 'selecting calibration type'
2009-Mar-18 22:08:38 LOG5    begin_task: Level: (3)    ID = <10042>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:38 LOG3    vw_send: To DATATAKING: setcal hcorcal
2009-Mar-18 22:08:38 LOG2    socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE'
2009-Mar-18 22:08:38 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:08:38 START   begin_task: Starting task 'waiting on setcal'
2009-Mar-18 22:08:38 LOG5    begin_task: Level: (4)    ID = <10043>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:38 LOG4    got_cormsg: From DATATAKING: setcal hcorcal
2009-Mar-18 22:08:38 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:08:38 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:08:39 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-18 22:08:39 STOP    end_task: Finishing task 'waiting on setcal' with status 'OK'
2009-Mar-18 22:08:39 LOG5    end_task: Level: (4)    ID = <10043>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:39 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'setcal'
2009-Mar-18 22:08:39 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-18 22:08:39 LOG3    socket_wait: To ALFAMON: CAL HI
2009-Mar-18 22:08:39 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-18 22:08:39 LOG5    begin_task: Level: (4)    ID = <10044>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:39 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:08:39 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-18 22:08:39 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-18 22:08:39 LOG5    end_task: Level: (4)    ID = <10044>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:39 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-18 22:08:39 LOG3    to_alfamon: To ALFAMON: CAL HI
2009-Mar-18 22:08:39 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-18 22:08:39 LOG3    socket_wait: To ALFAMON: NOISE ACTIVE
2009-Mar-18 22:08:39 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-18 22:08:39 LOG5    begin_task: Level: (4)    ID = <10045>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:39 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-18 22:08:39 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-18 22:08:39 LOG5    end_task: Level: (4)    ID = <10045>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:39 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-18 22:08:39 LOG3    to_alfamon: To ALFAMON: NOISE ACTIVE
2009-Mar-18 22:08:39 STOP    end_task: Finishing task 'selecting calibration type' with status 'OK'
2009-Mar-18 22:08:39 LOG5    end_task: Level: (3)    ID = <10042>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:39 LOG3    send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin
2009-Mar-18 22:08:39 LOG3    send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin
2009-Mar-18 22:08:39 LOG3    send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin
2009-Mar-18 22:08:39 LOG3    send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin
2009-Mar-18 22:08:39 INFO5   new_file: There is no need to start a new FITS-file since the current one 'wapp.20090318.a2048.0000.fits' is empty!
2009-Mar-18 22:08:39 INFO2   smartfreq: Starting smart frequency switching loop 1 of 2
2009-Mar-18 22:08:39 LOG4    send_obs_status: To obs_status: <1> LOOP 1
2009-Mar-18 22:08:39 LOG4    send_obs_status: To obs_status: <1> BITMAP stat_cal_off     INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs}    MESSAGE {Setting CAL-OFF ...}
2009-Mar-18 22:08:39 LOG3    wapp_calcontrol: To CALCONTROL: CALOFF
2009-Mar-18 22:08:39 LOG3    sock_errsend: To CALCONTROL: CALOFF STATUS
2009-Mar-18 22:08:39 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-18 22:08:39 LOG5    begin_task: Level: (3)    ID = <10046>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:39 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-18 22:08:39 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x02
2009-Mar-18 22:08:39 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-18 22:08:39 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-18 22:08:39 LOG5    end_task: Level: (3)    ID = <10046>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:39 LOG4    send_obs_status: To obs_status: <1> TOTALPARTS 2*7
2009-Mar-18 22:08:39 START   begin_task: Starting task 'adjusting WAPP power'
2009-Mar-18 22:08:39 LOG5    begin_task: Level: (3)    ID = <10047>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:39 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT    BITMAP stat_power INFO {Adjusting WAPP power ...}
2009-Mar-18 22:08:39 INFO2   adjust_power: Starting to adjust WAPP power
2009-Mar-18 22:08:39 LOG3    vw_send: To DATATAKING: adjpwrif2 
2009-Mar-18 22:08:39 LOG2    socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE'
2009-Mar-18 22:08:39 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:08:39 START   begin_task: Starting task 'waiting on adjpwrif2'
2009-Mar-18 22:08:39 LOG5    begin_task: Level: (4)    ID = <10048>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:39 LOG4    got_cormsg: From DATATAKING: adjpwrif2
2009-Mar-18 22:08:39 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:08:39 LOG4    WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin'
2009-Mar-18 22:08:42 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:08:42 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-18 22:08:42 STOP    end_task: Finishing task 'waiting on adjpwrif2' with status 'OK'
2009-Mar-18 22:08:42 LOG5    end_task: Level: (4)    ID = <10048>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:42 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2'
2009-Mar-18 22:08:42 START   begin_task: Starting task 'adjusting WAPP power'
2009-Mar-18 22:08:42 LOG5    begin_task: Level: (4)    ID = <10049>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:42 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT    BITMAP stat_power INFO {Adjusting power ...}
2009-Mar-18 22:08:42 LOG3    sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-18 22:08:42 LOG3    sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-18 22:08:42 LOG3    sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-18 22:08:42 LOG3    sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-18 22:08:42 START   begin_task: Starting task 'waiting on adjust WAPP power'
2009-Mar-18 22:08:42 LOG5    begin_task: Level: (5)    ID = <10050>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:42 LOG4    WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1'
2009-Mar-18 22:08:42 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:08:43 INFO2   WAPP=1-auto_atten_dual: Attenuators beam 0:  7  6 dB  ---  beam 1:  7  6 dB
2009-Mar-18 22:08:43 INFO2   WAPP=3-auto_atten_dual: Attenuators beam 4:  3  1 dB  ---  beam 5:  5  4 dB
2009-Mar-18 22:08:43 INFO2   WAPP=2-auto_atten_dual: Attenuators beam 2:  6  4 dB  ---  beam 3:  4  3 dB
2009-Mar-18 22:08:43 INFO2   WAPP=4-auto_atten_dual: Attenuators beam 6:  3  0 dB  ---  beam 7:  2  0 dB
2009-Mar-18 22:08:43 INFO1   WAPP=1+2+3+4-adjust_power: DONE adjusting power
2009-Mar-18 22:08:43 STOP    end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK'
2009-Mar-18 22:08:43 LOG5    end_task: Level: (5)    ID = <10050>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:43 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 0:  1.044  0.950    ALFA beam 1:  0.924  1.091
2009-Mar-18 22:08:43 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 2:  1.059  1.001    ALFA beam 3:  0.907  0.910
2009-Mar-18 22:08:43 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 4:  0.922  1.000    ALFA beam 5:  1.112  0.957
2009-Mar-18 22:08:43 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 6:  0.956  0.108    ALFA beam 7:  1.057  0.119
2009-Mar-18 22:08:43 STOP    finish_task: Finishing task 'adjusting WAPP power'
2009-Mar-18 22:08:43 LOG5    finish_task: Level: (4)    ID = <10049>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:43 INFO3   finish_task: DONE finished adjusting: WAPP power
2009-Mar-18 22:08:43 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:08:43 STOP    end_task: Finishing task 'adjusting WAPP power' with status 'OK'
2009-Mar-18 22:08:43 LOG5    end_task: Level: (4)    ID = <10049>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:43 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_busy
2009-Mar-18 22:08:43 STOP    finish_task: Finishing task 'adjusting WAPP power'
2009-Mar-18 22:08:43 LOG5    finish_task: Level: (3)    ID = <10047>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:43 INFO2   finish_task: DONE finished adjusting: WAPP power levels
2009-Mar-18 22:08:43 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:08:43 STOP    end_task: Finishing task 'adjusting WAPP power' with status 'OK'
2009-Mar-18 22:08:43 LOG5    end_task: Level: (3)    ID = <10047>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:43 INFO3   smartfreq: Taking CAL-OFF at 1375.80607910 MHz ...
2009-Mar-18 22:08:43 LOG4    send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...}
2009-Mar-18 22:08:43 INFO4   set_smart_frequency: Setting frequency 1375.80607910 MHz
2009-Mar-18 22:08:43 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:08:43 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21334 J
2009-Mar-18 22:08:43 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:08:43 LOG2    antvel: Parameters to Doppler: Topocentric 94122 2009 77 0.0
2009-Mar-18 22:08:43 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:08:43 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910
2009-Mar-18 22:08:43 INFO4   dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079
2009-Mar-18 22:08:43 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:08:43 LOG2    dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:08:43 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0}
2009-Mar-18 22:08:43 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:08:43 LOG4    take_data: Calling 'take_data 10 1 SMARTF OFF -'
2009-Mar-18 22:08:43 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:08:43 LOG5    begin_task: Level: (3)    ID = <10051>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:43 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.478839 2009.2133407483459 18.999933
2009-Mar-18 22:08:43 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222213  23.106694444444450
2009-Mar-18 22:08:43 LOG4    log_alfabeam: ALFABEAM 1   9.674228997424917  23.008941518298730
2009-Mar-18 22:08:43 LOG4    log_alfabeam: ALFABEAM 2   9.681120537738218  23.030969812835192
2009-Mar-18 22:08:43 LOG4    log_alfabeam: ALFABEAM 3   9.684193696199529  23.128291420678373
2009-Mar-18 22:08:43 LOG4    log_alfabeam: ALFABEAM 4   9.680177312885418  23.204739035793430
2009-Mar-18 22:08:43 LOG4    log_alfabeam: ALFABEAM 5   9.673201176090053  23.181834419584412
2009-Mar-18 22:08:43 LOG4    log_alfabeam: ALFABEAM 6   9.670326633012014  23.083377213577577
2009-Mar-18 22:08:43 INFO2   take_data: Starting WAPP+GALFA scan: 907700159
2009-Mar-18 22:08:44 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:08:44 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:08:44 LOG5    begin_task: Level: (4)    ID = <10052>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:44 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:08:44 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0}
2009-Mar-18 22:08:44 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:08:44 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:08:44 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:08:44 INFO1   WAPP=1+2+3+4-start_spectra: start sec 7725.00
2009-Mar-18 22:08:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:08:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:08:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:08:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:08:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:08:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:08:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:08:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:08:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:08:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 22:08:46 LOG4    check_wapp_levels: WAPP-1 power levels:    1.089  0.978    0.961  1.109
2009-Mar-18 22:08:46 LOG4    check_wapp_levels: WAPP-2 power levels:    1.059  1.001    0.907  0.910
2009-Mar-18 22:08:46 LOG4    check_wapp_levels: WAPP-3 power levels:    0.922  1.000    1.112  0.957
2009-Mar-18 22:08:46 LOG4    check_wapp_levels: WAPP-4 power levels:    0.973  0.109    1.077  0.120
2009-Mar-18 22:08:48 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.187 (still bad)
2009-Mar-18 22:08:50 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.190 (still bad)
2009-Mar-18 22:08:52 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.187 (still bad)
2009-Mar-18 22:08:54 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.186 (still bad)
2009-Mar-18 22:08:55 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:08:55 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:08:55 LOG5    end_task: Level: (4)    ID = <10052>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:55 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:08:55 LOG5    end_task: Level: (3)    ID = <10051>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:55 INFO3   smartfreq: Taking CAL-OFF at 1378.54045410 MHz ...
2009-Mar-18 22:08:55 LOG4    send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...}
2009-Mar-18 22:08:55 INFO4   set_smart_frequency: Setting frequency 1378.54045410 MHz
2009-Mar-18 22:08:55 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:08:55 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21334 J
2009-Mar-18 22:08:55 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:08:55 LOG2    antvel: Parameters to Doppler: Topocentric 94135 2009 77 0.0
2009-Mar-18 22:08:55 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:08:55 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410
2009-Mar-18 22:08:55 INFO4   dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454
2009-Mar-18 22:08:55 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:08:55 LOG2    dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:08:55 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0}
2009-Mar-18 22:08:55 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:08:55 LOG4    take_data: Calling 'take_data 10 1 SMARTF OFF -'
2009-Mar-18 22:08:55 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:08:55 LOG5    begin_task: Level: (3)    ID = <10053>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:55 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.482460 2009.2133411602911 18.999933
2009-Mar-18 22:08:55 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222200  23.106694444444450
2009-Mar-18 22:08:55 LOG4    log_alfabeam: ALFABEAM 1   9.674285804287484  23.008614034611739
2009-Mar-18 22:08:55 LOG4    log_alfabeam: ALFABEAM 2   9.681164148205138  23.031402463973812
2009-Mar-18 22:08:55 LOG4    log_alfabeam: ALFABEAM 3   9.684181106333485  23.129058470537220
2009-Mar-18 22:08:55 LOG4    log_alfabeam: ALFABEAM 4   9.680120055152834  23.205063733321669
2009-Mar-18 22:08:55 LOG4    log_alfabeam: ALFABEAM 5   9.673157303052752  23.181385414321721
2009-Mar-18 22:08:55 LOG4    log_alfabeam: ALFABEAM 6   9.670340616460399  23.082610668572265
2009-Mar-18 22:08:55 INFO2   take_data: Starting WAPP+GALFA scan: 907700160
2009-Mar-18 22:08:56 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:08:56 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:08:56 LOG5    begin_task: Level: (4)    ID = <10054>    Status = 0 0 0 0  ok
2009-Mar-18 22:08:56 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:08:56 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0}
2009-Mar-18 22:08:56 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:08:56 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:08:56 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:08:56 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.184 (still bad)
2009-Mar-18 22:08:56 INFO1   WAPP=1+2+3+4-start_spectra: start sec 7737.00
2009-Mar-18 22:08:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:08:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:08:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:08:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:08:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:08:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:08:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:08:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:08:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:08:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.184 (still bad)
2009-Mar-18 22:09:00 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.112 (still bad)
2009-Mar-18 22:09:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 22:09:04 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 22:09:06 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad)
2009-Mar-18 22:09:07 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:09:07 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:09:07 LOG5    end_task: Level: (4)    ID = <10054>    Status = 0 0 0 0  ok
2009-Mar-18 22:09:07 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:09:07 LOG5    end_task: Level: (3)    ID = <10053>    Status = 0 0 0 0  ok
2009-Mar-18 22:09:07 INFO3   smartfreq: Taking CAL-OFF at 1378.73576660 MHz ...
2009-Mar-18 22:09:07 LOG4    send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...}
2009-Mar-18 22:09:07 INFO4   set_smart_frequency: Setting frequency 1378.73576660 MHz
2009-Mar-18 22:09:07 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:09:07 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21334 J
2009-Mar-18 22:09:07 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:09:07 LOG2    antvel: Parameters to Doppler: Topocentric 94147 2009 77 0.0
2009-Mar-18 22:09:07 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:09:07 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660
2009-Mar-18 22:09:07 INFO4   dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767
2009-Mar-18 22:09:07 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:09:07 LOG2    dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:09:07 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0}
2009-Mar-18 22:09:07 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:09:07 LOG4    take_data: Calling 'take_data 10 1 SMARTF OFF -'
2009-Mar-18 22:09:07 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:09:07 LOG5    begin_task: Level: (3)    ID = <10055>    Status = 0 0 0 0  ok
2009-Mar-18 22:09:07 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.485803 2009.2133415405481 18.999933
2009-Mar-18 22:09:07 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222216  23.106694444444450
2009-Mar-18 22:09:07 LOG4    log_alfabeam: ALFABEAM 1   9.674338893665631  23.008314611372391
2009-Mar-18 22:09:07 LOG4    log_alfabeam: ALFABEAM 2   9.681204550850635  23.031809824674117
2009-Mar-18 22:09:07 LOG4    log_alfabeam: ALFABEAM 3   9.684168976915826  23.129771813789691
2009-Mar-18 22:09:07 LOG4    log_alfabeam: ALFABEAM 4   9.680066548102650  23.205360479313999
2009-Mar-18 22:09:07 LOG4    log_alfabeam: ALFABEAM 5   9.673116673121687  23.180962768789552
2009-Mar-18 22:09:07 LOG4    log_alfabeam: ALFABEAM 6   9.670354043353180  23.081898060932332
2009-Mar-18 22:09:07 INFO2   take_data: Starting WAPP+GALFA scan: 907700161
2009-Mar-18 22:09:08 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:09:08 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:09:08 LOG5    begin_task: Level: (4)    ID = <10056>    Status = 0 0 0 0  ok
2009-Mar-18 22:09:08 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:09:08 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0}
2009-Mar-18 22:09:08 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:09:08 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:09:08 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:09:08 INFO1   WAPP=1+2+3+4-start_spectra: start sec 7749.00
2009-Mar-18 22:09:09 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad)
2009-Mar-18 22:09:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:09:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:09:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:09:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:09:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:09:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:09:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:09:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:09:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:09:11 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 22:09:13 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad)
2009-Mar-18 22:09:15 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 22:09:17 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad)
2009-Mar-18 22:09:19 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.115 (still bad)
2009-Mar-18 22:09:19 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:09:19 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:09:19 LOG5    end_task: Level: (4)    ID = <10056>    Status = 0 0 0 0  ok
2009-Mar-18 22:09:19 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:09:19 LOG5    end_task: Level: (3)    ID = <10055>    Status = 0 0 0 0  ok
2009-Mar-18 22:09:19 INFO3   smartfreq: Taking CAL-OFF at 1379.32170410 MHz ...
2009-Mar-18 22:09:19 LOG4    send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...}
2009-Mar-18 22:09:19 INFO4   set_smart_frequency: Setting frequency 1379.32170410 MHz
2009-Mar-18 22:09:19 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:09:19 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21334 J
2009-Mar-18 22:09:19 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:09:19 LOG2    antvel: Parameters to Doppler: Topocentric 94159 2009 77 0.0
2009-Mar-18 22:09:19 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:09:19 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410
2009-Mar-18 22:09:19 INFO4   dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704
2009-Mar-18 22:09:19 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:09:19 LOG2    dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:09:19 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0}
2009-Mar-18 22:09:19 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:09:19 LOG4    take_data: Calling 'take_data 10 1 SMARTF OFF -'
2009-Mar-18 22:09:19 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:09:19 LOG5    begin_task: Level: (3)    ID = <10057>    Status = 0 0 0 0  ok
2009-Mar-18 22:09:19 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.489145 2009.2133419208051 18.999933
2009-Mar-18 22:09:19 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222220  23.106694444444443
2009-Mar-18 22:09:19 LOG4    log_alfabeam: ALFABEAM 1   9.674392586787901  23.008018237274676
2009-Mar-18 22:09:19 LOG4    log_alfabeam: ALFABEAM 2   9.681245068427758  23.032224761382679
2009-Mar-18 22:09:19 LOG4    log_alfabeam: ALFABEAM 3   9.684156355654821  23.130489851690772
2009-Mar-18 22:09:19 LOG4    log_alfabeam: ALFABEAM 4   9.680012436226452  23.205654074667674
2009-Mar-18 22:09:19 LOG4    log_alfabeam: ALFABEAM 5   9.673075943342917  23.180532375107369
2009-Mar-18 22:09:19 LOG4    log_alfabeam: ALFABEAM 6   9.670367971842417  23.081181023810188
2009-Mar-18 22:09:19 INFO2   take_data: Starting WAPP+GALFA scan: 907700162
2009-Mar-18 22:09:20 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:09:20 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:09:20 LOG5    begin_task: Level: (4)    ID = <10058>    Status = 0 0 0 0  ok
2009-Mar-18 22:09:20 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:09:20 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0}
2009-Mar-18 22:09:20 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:09:20 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:09:20 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:09:20 INFO1   WAPP=1+2+3+4-start_spectra: start sec 7761.00
2009-Mar-18 22:09:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 22:09:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:09:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:09:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:09:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:09:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:09:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:09:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:09:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:09:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:09:23 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad)
2009-Mar-18 22:09:25 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad)
2009-Mar-18 22:09:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:09:29 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad)
2009-Mar-18 22:09:31 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:09:31 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad)
2009-Mar-18 22:09:31 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:09:31 LOG5    end_task: Level: (4)    ID = <10058>    Status = 0 0 0 0  ok
2009-Mar-18 22:09:31 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:09:31 LOG5    end_task: Level: (3)    ID = <10057>    Status = 0 0 0 0  ok
2009-Mar-18 22:09:31 INFO3   smartfreq: Taking CAL-OFF at 1380.49357910 MHz ...
2009-Mar-18 22:09:31 LOG4    send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...}
2009-Mar-18 22:09:31 INFO4   set_smart_frequency: Setting frequency 1380.49357910 MHz
2009-Mar-18 22:09:31 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:09:31 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21334 J
2009-Mar-18 22:09:31 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:09:31 LOG2    antvel: Parameters to Doppler: Topocentric 94171 2009 77 0.0
2009-Mar-18 22:09:31 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:09:31 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910
2009-Mar-18 22:09:31 INFO4   dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579
2009-Mar-18 22:09:31 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:09:31 LOG2    dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:09:31 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0}
2009-Mar-18 22:09:31 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:09:31 LOG4    take_data: Calling 'take_data 10 1 SMARTF OFF -'
2009-Mar-18 22:09:31 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:09:31 LOG5    begin_task: Level: (3)    ID = <10059>    Status = 0 0 0 0  ok
2009-Mar-18 22:09:31 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.492488 2009.2133423010623 18.999933
2009-Mar-18 22:09:31 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222216  23.106694444444443
2009-Mar-18 22:09:31 LOG4    log_alfabeam: ALFABEAM 1   9.674446917196869  23.007724892995157
2009-Mar-18 22:09:31 LOG4    log_alfabeam: ALFABEAM 2   9.681285717413878  23.032647609745190
2009-Mar-18 22:09:31 LOG4    log_alfabeam: ALFABEAM 3   9.684143225494481  23.131212944730962
2009-Mar-18 22:09:31 LOG4    log_alfabeam: ALFABEAM 4   9.679957685886906  23.205944535582464
2009-Mar-18 22:09:31 LOG4    log_alfabeam: ALFABEAM 5   9.673035097603165  23.180093890613033
2009-Mar-18 22:09:31 LOG4    log_alfabeam: ALFABEAM 6   9.670382419450887  23.080459203874167
2009-Mar-18 22:09:31 INFO2   take_data: Starting WAPP+GALFA scan: 907700163
2009-Mar-18 22:09:32 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:09:32 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:09:32 LOG5    begin_task: Level: (4)    ID = <10060>    Status = 0 0 0 0  ok
2009-Mar-18 22:09:32 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:09:32 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0}
2009-Mar-18 22:09:32 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:09:32 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:09:32 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:09:32 INFO1   WAPP=1+2+3+4-start_spectra: start sec 7773.00
2009-Mar-18 22:09:33 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad)
2009-Mar-18 22:09:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:09:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:09:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:09:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:09:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:09:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:09:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:09:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:09:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:09:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 22:09:37 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 22:09:39 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:09:41 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:09:43 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:09:43 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:09:43 LOG5    end_task: Level: (4)    ID = <10060>    Status = 0 0 0 0  ok
2009-Mar-18 22:09:43 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:09:43 LOG5    end_task: Level: (3)    ID = <10059>    Status = 0 0 0 0  ok
2009-Mar-18 22:09:43 INFO3   smartfreq: Taking CAL-OFF at 1380.88420410 MHz ...
2009-Mar-18 22:09:43 LOG4    send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...}
2009-Mar-18 22:09:43 INFO4   set_smart_frequency: Setting frequency 1380.88420410 MHz
2009-Mar-18 22:09:43 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:09:43 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21334 J
2009-Mar-18 22:09:43 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:09:43 LOG2    antvel: Parameters to Doppler: Topocentric 94183 2009 77 0.0
2009-Mar-18 22:09:43 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:09:43 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410
2009-Mar-18 22:09:43 INFO4   dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204
2009-Mar-18 22:09:43 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:09:43 LOG2    dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:09:43 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0}
2009-Mar-18 22:09:43 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:09:43 LOG4    take_data: Calling 'take_data 10 1 SMARTF OFF -'
2009-Mar-18 22:09:43 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:09:43 LOG5    begin_task: Level: (3)    ID = <10061>    Status = 0 0 0 0  ok
2009-Mar-18 22:09:43 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.495830 2009.2133426813193 18.999933
2009-Mar-18 22:09:43 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222220  23.106694444444443
2009-Mar-18 22:09:43 LOG4    log_alfabeam: ALFABEAM 1   9.674501853471506  23.007434914937367
2009-Mar-18 22:09:43 LOG4    log_alfabeam: ALFABEAM 2   9.681326465416250  23.033078202114321
2009-Mar-18 22:09:43 LOG4    log_alfabeam: ALFABEAM 3   9.684129584802291  23.131940586124969
2009-Mar-18 22:09:43 LOG4    log_alfabeam: ALFABEAM 4   9.679902328918393  23.206231525961570
2009-Mar-18 22:09:43 LOG4    log_alfabeam: ALFABEAM 5   9.672994168907023  23.179647494777264
2009-Mar-18 22:09:43 LOG4    log_alfabeam: ALFABEAM 6   9.670397386687503  23.079733113692040
2009-Mar-18 22:09:43 INFO2   take_data: Starting WAPP+GALFA scan: 907700164
2009-Mar-18 22:09:44 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:09:44 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:09:44 LOG5    begin_task: Level: (4)    ID = <10062>    Status = 0 0 0 0  ok
2009-Mar-18 22:09:44 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:09:44 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0}
2009-Mar-18 22:09:44 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 22:09:44 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:09:44 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:09:44 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:09:44 INFO1   WAPP=1+2+3+4-start_spectra: start sec 7785.00
2009-Mar-18 22:09:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:09:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:09:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:09:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:09:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:09:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:09:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:09:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:09:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:09:46 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:09:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:09:48 LOG4    check_wapp_levels: WAPP-1 power levels:    1.033  0.945    0.911  1.084
2009-Mar-18 22:09:48 LOG4    check_wapp_levels: WAPP-2 power levels:    1.054  0.999    0.899  0.902
2009-Mar-18 22:09:48 LOG4    check_wapp_levels: WAPP-3 power levels:    0.913  0.997    1.105  0.948
2009-Mar-18 22:09:48 LOG4    check_wapp_levels: WAPP-4 power levels:    0.945  0.108    1.045  0.119
2009-Mar-18 22:09:50 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:09:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 22:09:54 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:09:55 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:09:55 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:09:55 LOG5    end_task: Level: (4)    ID = <10062>    Status = 0 0 0 0  ok
2009-Mar-18 22:09:55 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:09:55 LOG5    end_task: Level: (3)    ID = <10061>    Status = 0 0 0 0  ok
2009-Mar-18 22:09:55 INFO3   smartfreq: Taking CAL-OFF at 1381.86076660 MHz ...
2009-Mar-18 22:09:55 LOG4    send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...}
2009-Mar-18 22:09:55 INFO4   set_smart_frequency: Setting frequency 1381.86076660 MHz
2009-Mar-18 22:09:55 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:09:55 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21334 J
2009-Mar-18 22:09:55 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:09:55 LOG2    antvel: Parameters to Doppler: Topocentric 94195 2009 77 0.0
2009-Mar-18 22:09:55 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:09:55 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660
2009-Mar-18 22:09:55 INFO4   dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767
2009-Mar-18 22:09:55 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:09:55 LOG2    dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:09:55 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0}
2009-Mar-18 22:09:55 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:09:55 LOG4    take_data: Calling 'take_data 10 1 SMARTF OFF -'
2009-Mar-18 22:09:55 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:09:55 LOG5    begin_task: Level: (3)    ID = <10063>    Status = 0 0 0 0  ok
2009-Mar-18 22:09:55 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.499173 2009.2133430615763 18.999933
2009-Mar-18 22:09:55 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222211  23.106694444444454
2009-Mar-18 22:09:55 LOG4    log_alfabeam: ALFABEAM 1   9.674557429230576  23.007148293389271
2009-Mar-18 22:09:55 LOG4    log_alfabeam: ALFABEAM 2   9.681367328433849  23.033516879392277
2009-Mar-18 22:09:55 LOG4    log_alfabeam: ALFABEAM 3   9.684115415946600  23.132673132005340
2009-Mar-18 22:09:55 LOG4    log_alfabeam: ALFABEAM 4   9.679846331619085  23.206515052355932
2009-Mar-18 22:09:55 LOG4    log_alfabeam: ALFABEAM 5   9.672953141644511  23.179192839952819
2009-Mar-18 22:09:55 LOG4    log_alfabeam: ALFABEAM 6   9.670412891621783  23.079002404582631
2009-Mar-18 22:09:55 INFO2   take_data: Starting WAPP+GALFA scan: 907700165
2009-Mar-18 22:09:56 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:09:56 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:09:56 LOG5    begin_task: Level: (4)    ID = <10064>    Status = 0 0 0 0  ok
2009-Mar-18 22:09:56 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:09:56 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0}
2009-Mar-18 22:09:56 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:09:56 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:09:56 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:09:56 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:09:56 INFO1   WAPP=1+2+3+4-start_spectra: start sec 7797.00
2009-Mar-18 22:09:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:09:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:09:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:09:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:09:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:09:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:09:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:09:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:09:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:09:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:10:00 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 22:10:02 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad)
2009-Mar-18 22:10:04 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:10:06 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:10:07 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:10:07 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:10:07 LOG5    end_task: Level: (4)    ID = <10064>    Status = 0 0 0 0  ok
2009-Mar-18 22:10:07 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:10:07 LOG5    end_task: Level: (3)    ID = <10063>    Status = 0 0 0 0  ok
2009-Mar-18 22:10:07 LOG4    send_obs_status: To obs_status: <1> BITMAP stat_cal_on    INFO {Making 7 CAL-ONs}    MESSAGE {Setting CAL-ON ...}
2009-Mar-18 22:10:07 LOG3    wapp_calcontrol: To CALCONTROL: CALON
2009-Mar-18 22:10:07 LOG3    sock_errsend: To CALCONTROL: CALON STATUS
2009-Mar-18 22:10:07 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-18 22:10:07 LOG5    begin_task: Level: (3)    ID = <10065>    Status = 0 0 0 0  ok
2009-Mar-18 22:10:07 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-18 22:10:07 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x03
2009-Mar-18 22:10:07 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-18 22:10:07 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-18 22:10:07 LOG5    end_task: Level: (3)    ID = <10065>    Status = 0 0 0 0  ok
2009-Mar-18 22:10:07 INFO3   smartfreq: Taking CAL-ON at 1375.80607910 MHz ...
2009-Mar-18 22:10:07 LOG4    send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...}
2009-Mar-18 22:10:07 INFO4   set_smart_frequency: Setting frequency 1375.80607910 MHz
2009-Mar-18 22:10:07 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:10:07 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21334 J
2009-Mar-18 22:10:07 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:10:07 LOG2    antvel: Parameters to Doppler: Topocentric 94207 2009 77 0.0
2009-Mar-18 22:10:07 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:10:07 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910
2009-Mar-18 22:10:07 INFO4   dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079
2009-Mar-18 22:10:07 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:10:07 LOG2    dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:10:07 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0}
2009-Mar-18 22:10:07 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:10:07 LOG4    take_data: Calling 'take_data 10 1 SMARTF ON -'
2009-Mar-18 22:10:07 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:10:07 LOG5    begin_task: Level: (3)    ID = <10066>    Status = 0 0 0 0  ok
2009-Mar-18 22:10:07 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.502515 2009.2133434418333 18.999933
2009-Mar-18 22:10:07 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222198  23.106694444444443
2009-Mar-18 22:10:07 LOG4    log_alfabeam: ALFABEAM 1   9.674613611612386  23.006865366351445
2009-Mar-18 22:10:07 LOG4    log_alfabeam: ALFABEAM 2   9.681408273325461  23.033963459989657
2009-Mar-18 22:10:07 LOG4    log_alfabeam: ALFABEAM 3   9.684100717974825  23.133410059618434
2009-Mar-18 22:10:07 LOG4    log_alfabeam: ALFABEAM 4   9.679789727278081  23.206794777294011
2009-Mar-18 22:10:07 LOG4    log_alfabeam: ALFABEAM 5   9.672912049554231  23.178730120248218
2009-Mar-18 22:10:07 LOG4    log_alfabeam: ALFABEAM 6   9.670428934030534  23.078267604686662
2009-Mar-18 22:10:07 INFO2   take_data: Starting WAPP+GALFA scan: 907700166
2009-Mar-18 22:10:08 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:10:08 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:10:08 LOG5    begin_task: Level: (4)    ID = <10067>    Status = 0 0 0 0  ok
2009-Mar-18 22:10:08 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:10:08 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0}
2009-Mar-18 22:10:08 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:10:08 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:10:08 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:10:08 INFO1   WAPP=1+2+3+4-start_spectra: start sec 7809.00
2009-Mar-18 22:10:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 22:10:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:10:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:10:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:10:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:10:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:10:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:10:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:10:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:10:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:10:10 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.666 (still bad)
2009-Mar-18 22:10:12 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.668 (still bad)
2009-Mar-18 22:10:14 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.670 (still bad)
2009-Mar-18 22:10:16 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.669 (still bad)
2009-Mar-18 22:10:18 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.672 (still bad)
2009-Mar-18 22:10:19 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:10:19 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:10:19 LOG5    end_task: Level: (4)    ID = <10067>    Status = 0 0 0 0  ok
2009-Mar-18 22:10:19 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:10:19 LOG5    end_task: Level: (3)    ID = <10066>    Status = 0 0 0 0  ok
2009-Mar-18 22:10:19 INFO3   smartfreq: Taking CAL-ON at 1378.54045410 MHz ...
2009-Mar-18 22:10:19 LOG4    send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...}
2009-Mar-18 22:10:19 INFO4   set_smart_frequency: Setting frequency 1378.54045410 MHz
2009-Mar-18 22:10:19 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:10:19 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21334 J
2009-Mar-18 22:10:19 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:10:19 LOG2    antvel: Parameters to Doppler: Topocentric 94219 2009 77 0.0
2009-Mar-18 22:10:19 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:10:19 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410
2009-Mar-18 22:10:19 INFO4   dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454
2009-Mar-18 22:10:19 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:10:19 LOG2    dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:10:19 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0}
2009-Mar-18 22:10:19 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:10:19 LOG4    take_data: Calling 'take_data 10 1 SMARTF ON -'
2009-Mar-18 22:10:19 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:10:19 LOG5    begin_task: Level: (3)    ID = <10068>    Status = 0 0 0 0  ok
2009-Mar-18 22:10:19 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.505857 2009.2133438220906 18.999933
2009-Mar-18 22:10:19 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222207  23.106694444444443
2009-Mar-18 22:10:19 LOG4    log_alfabeam: ALFABEAM 1   9.674670417166485  23.006586216717078
2009-Mar-18 22:10:19 LOG4    log_alfabeam: ALFABEAM 2   9.681449303294833  23.034418152256634
2009-Mar-18 22:10:19 LOG4    log_alfabeam: ALFABEAM 3   9.684085477348642  23.134151497613590
2009-Mar-18 22:10:19 LOG4    log_alfabeam: ALFABEAM 4   9.679732499401453  23.207070615704563
2009-Mar-18 22:10:19 LOG4    log_alfabeam: ALFABEAM 5   9.672870889881310  23.178259125774122
2009-Mar-18 22:10:19 LOG4    log_alfabeam: ALFABEAM 6   9.670445527452991  23.077528592299601
2009-Mar-18 22:10:19 INFO2   take_data: Starting WAPP+GALFA scan: 907700167
2009-Mar-18 22:10:20 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:10:20 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:10:20 LOG5    begin_task: Level: (4)    ID = <10069>    Status = 0 0 0 0  ok
2009-Mar-18 22:10:20 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:10:20 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0}
2009-Mar-18 22:10:20 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:10:20 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:10:20 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:10:20 INFO1   WAPP=1+2+3+4-start_spectra: start sec 7821.00
2009-Mar-18 22:10:21 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.673 (still bad)
2009-Mar-18 22:10:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:10:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:10:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:10:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:10:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:10:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:10:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:10:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:10:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:10:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.565 (still bad)
2009-Mar-18 22:10:25 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.563 (still bad)
2009-Mar-18 22:10:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.571 (still bad)
2009-Mar-18 22:10:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.567 (still bad)
2009-Mar-18 22:10:31 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.568 (still bad)
2009-Mar-18 22:10:31 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:10:31 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:10:31 LOG5    end_task: Level: (4)    ID = <10069>    Status = 0 0 0 0  ok
2009-Mar-18 22:10:31 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:10:31 LOG5    end_task: Level: (3)    ID = <10068>    Status = 0 0 0 0  ok
2009-Mar-18 22:10:31 INFO3   smartfreq: Taking CAL-ON at 1378.73576660 MHz ...
2009-Mar-18 22:10:31 LOG4    send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...}
2009-Mar-18 22:10:31 INFO4   set_smart_frequency: Setting frequency 1378.73576660 MHz
2009-Mar-18 22:10:31 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:10:31 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21334 J
2009-Mar-18 22:10:31 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:10:31 LOG2    antvel: Parameters to Doppler: Topocentric 94231 2009 77 0.0
2009-Mar-18 22:10:31 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:10:31 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660
2009-Mar-18 22:10:31 INFO4   dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767
2009-Mar-18 22:10:31 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:10:31 LOG2    dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:10:31 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0}
2009-Mar-18 22:10:31 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:10:31 LOG4    take_data: Calling 'take_data 10 1 SMARTF ON -'
2009-Mar-18 22:10:31 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:10:31 LOG5    begin_task: Level: (3)    ID = <10070>    Status = 0 0 0 0  ok
2009-Mar-18 22:10:31 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.509200 2009.2133442023476 18.999933
2009-Mar-18 22:10:31 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222223  23.106694444444450
2009-Mar-18 22:10:31 LOG4    log_alfabeam: ALFABEAM 1   9.674727862805103  23.006310934468043
2009-Mar-18 22:10:31 LOG4    log_alfabeam: ALFABEAM 2   9.681490421333685  23.034881171544900
2009-Mar-18 22:10:31 LOG4    log_alfabeam: ALFABEAM 3   9.684069679941754  23.134897574635886
2009-Mar-18 22:10:31 LOG4    log_alfabeam: ALFABEAM 4   9.679674631138711  23.207342475355478
2009-Mar-18 22:10:31 LOG4    log_alfabeam: ALFABEAM 5   9.672829660104517  23.177779639705747
2009-Mar-18 22:10:31 LOG4    log_alfabeam: ALFABEAM 6   9.670462686005012  23.076785246019679
2009-Mar-18 22:10:31 INFO2   take_data: Starting WAPP+GALFA scan: 907700168
2009-Mar-18 22:10:32 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:10:32 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:10:32 LOG5    begin_task: Level: (4)    ID = <10071>    Status = 0 0 0 0  ok
2009-Mar-18 22:10:32 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:10:32 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0}
2009-Mar-18 22:10:32 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:10:32 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:10:32 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:10:32 INFO1   WAPP=1+2+3+4-start_spectra: start sec 7833.00
2009-Mar-18 22:10:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.568 (still bad)
2009-Mar-18 22:10:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:10:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:10:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:10:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:10:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:10:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:10:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:10:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:10:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:10:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.563 (still bad)
2009-Mar-18 22:10:37 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.558 (still bad)
2009-Mar-18 22:10:39 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.565 (still bad)
2009-Mar-18 22:10:41 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.562 (still bad)
2009-Mar-18 22:10:43 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:10:43 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.564 (still bad)
2009-Mar-18 22:10:43 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:10:43 LOG5    end_task: Level: (4)    ID = <10071>    Status = 0 0 0 0  ok
2009-Mar-18 22:10:43 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:10:43 LOG5    end_task: Level: (3)    ID = <10070>    Status = 0 0 0 0  ok
2009-Mar-18 22:10:43 INFO3   smartfreq: Taking CAL-ON at 1379.32170410 MHz ...
2009-Mar-18 22:10:43 LOG4    send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...}
2009-Mar-18 22:10:43 INFO4   set_smart_frequency: Setting frequency 1379.32170410 MHz
2009-Mar-18 22:10:43 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:10:43 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21334 J
2009-Mar-18 22:10:43 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:10:43 LOG2    antvel: Parameters to Doppler: Topocentric 94243 2009 77 0.0
2009-Mar-18 22:10:43 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:10:43 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410
2009-Mar-18 22:10:43 INFO4   dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704
2009-Mar-18 22:10:43 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:10:43 LOG2    dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:10:43 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0}
2009-Mar-18 22:10:43 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:10:43 LOG4    take_data: Calling 'take_data 10 1 SMARTF ON -'
2009-Mar-18 22:10:43 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:10:43 LOG5    begin_task: Level: (3)    ID = <10072>    Status = 0 0 0 0  ok
2009-Mar-18 22:10:43 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.512542 2009.2133445826046 18.999933
2009-Mar-18 22:10:43 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222207  23.106694444444450
2009-Mar-18 22:10:43 LOG4    log_alfabeam: ALFABEAM 1   9.674785913398418  23.006039858509880
2009-Mar-18 22:10:43 LOG4    log_alfabeam: ALFABEAM 2   9.681531593207664  23.035352313577150
2009-Mar-18 22:10:43 LOG4    log_alfabeam: ALFABEAM 3   9.684053325960921  23.135647743638820
2009-Mar-18 22:10:43 LOG4    log_alfabeam: ALFABEAM 4   9.679616158067164  23.207610018241411
2009-Mar-18 22:10:43 LOG4    log_alfabeam: ALFABEAM 5   9.672788395026330  23.177291879915888
2009-Mar-18 22:10:43 LOG4    log_alfabeam: ALFABEAM 6   9.670480408225027  23.076038117571056
2009-Mar-18 22:10:43 INFO2   take_data: Starting WAPP+GALFA scan: 907700169
2009-Mar-18 22:10:44 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:10:44 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:10:44 LOG5    begin_task: Level: (4)    ID = <10073>    Status = 0 0 0 0  ok
2009-Mar-18 22:10:44 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:10:44 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0}
2009-Mar-18 22:10:44 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:10:44 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:10:44 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:10:44 INFO1   WAPP=1+2+3+4-start_spectra: start sec 7845.00
2009-Mar-18 22:10:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.562 (still bad)
2009-Mar-18 22:10:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:10:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:10:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:10:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:10:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:10:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:10:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:10:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:10:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:10:47 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.551 (still bad)
2009-Mar-18 22:10:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:10:49 LOG4    check_wapp_levels: WAPP-1 power levels:    1.434  1.292    1.243  1.481
2009-Mar-18 22:10:49 LOG4    check_wapp_levels: WAPP-2 power levels:    1.461  1.397    1.256  1.248
2009-Mar-18 22:10:49 LOG4    check_wapp_levels: WAPP-3 power levels:    1.280  1.400    1.551  1.277
2009-Mar-18 22:10:49 LOG4    check_wapp_levels: WAPP-4 power levels:    1.332  0.108    1.472  0.119
2009-Mar-18 22:10:51 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.548 (still bad)
2009-Mar-18 22:10:53 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.553 (still bad)
2009-Mar-18 22:10:55 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:10:55 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:10:55 LOG5    end_task: Level: (4)    ID = <10073>    Status = 0 0 0 0  ok
2009-Mar-18 22:10:55 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:10:55 LOG5    end_task: Level: (3)    ID = <10072>    Status = 0 0 0 0  ok
2009-Mar-18 22:10:55 INFO3   smartfreq: Taking CAL-ON at 1380.49357910 MHz ...
2009-Mar-18 22:10:55 LOG4    send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...}
2009-Mar-18 22:10:55 INFO4   set_smart_frequency: Setting frequency 1380.49357910 MHz
2009-Mar-18 22:10:55 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:10:55 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21334 J
2009-Mar-18 22:10:55 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:10:55 LOG2    antvel: Parameters to Doppler: Topocentric 94255 2009 77 0.0
2009-Mar-18 22:10:55 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:10:55 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910
2009-Mar-18 22:10:55 INFO4   dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579
2009-Mar-18 22:10:55 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:10:55 LOG2    dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:10:55 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0}
2009-Mar-18 22:10:55 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:10:55 LOG4    take_data: Calling 'take_data 10 1 SMARTF ON -'
2009-Mar-18 22:10:55 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:10:55 LOG5    begin_task: Level: (3)    ID = <10074>    Status = 0 0 0 0  ok
2009-Mar-18 22:10:55 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.515885 2009.2133449628616 18.999933
2009-Mar-18 22:10:55 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222207  23.106694444444443
2009-Mar-18 22:10:55 LOG4    log_alfabeam: ALFABEAM 1   9.674844602512694  23.005773003229198
2009-Mar-18 22:10:55 LOG4    log_alfabeam: ALFABEAM 2   9.681572833603019  23.035831929961198
2009-Mar-18 22:10:55 LOG4    log_alfabeam: ALFABEAM 3   9.684036396461222  23.136402347248449
2009-Mar-18 22:10:55 LOG4    log_alfabeam: ALFABEAM 4   9.679557046569078  23.207873226780745
2009-Mar-18 22:10:55 LOG4    log_alfabeam: ALFABEAM 5   9.672747080405522  23.176795488869768
2009-Mar-18 22:10:55 LOG4    log_alfabeam: ALFABEAM 6   9.670498713414490  23.075286872377738
2009-Mar-18 22:10:55 INFO2   take_data: Starting WAPP+GALFA scan: 907700170
2009-Mar-18 22:10:56 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:10:56 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:10:56 LOG5    begin_task: Level: (4)    ID = <10075>    Status = 0 0 0 0  ok
2009-Mar-18 22:10:56 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:10:56 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0}
2009-Mar-18 22:10:56 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.552 (still bad)
2009-Mar-18 22:10:56 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:10:56 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:10:56 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:10:56 INFO1   WAPP=1+2+3+4-start_spectra: start sec 7857.00
2009-Mar-18 22:10:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:10:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:10:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:10:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:10:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:10:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:10:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:10:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:10:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:10:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.548 (still bad)
2009-Mar-18 22:11:00 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.550 (still bad)
2009-Mar-18 22:11:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.548 (still bad)
2009-Mar-18 22:11:04 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.549 (still bad)
2009-Mar-18 22:11:06 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.551 (still bad)
2009-Mar-18 22:11:07 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:11:07 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:11:07 LOG5    end_task: Level: (4)    ID = <10075>    Status = 0 0 0 0  ok
2009-Mar-18 22:11:07 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:11:07 LOG5    end_task: Level: (3)    ID = <10074>    Status = 0 0 0 0  ok
2009-Mar-18 22:11:07 INFO3   smartfreq: Taking CAL-ON at 1380.88420410 MHz ...
2009-Mar-18 22:11:07 LOG4    send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...}
2009-Mar-18 22:11:07 INFO4   set_smart_frequency: Setting frequency 1380.88420410 MHz
2009-Mar-18 22:11:07 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:11:07 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21335 J
2009-Mar-18 22:11:07 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:11:07 LOG2    antvel: Parameters to Doppler: Topocentric 94267 2009 77 0.0
2009-Mar-18 22:11:07 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:11:07 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410
2009-Mar-18 22:11:07 INFO4   dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204
2009-Mar-18 22:11:07 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:11:07 LOG2    dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:11:07 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0}
2009-Mar-18 22:11:07 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:11:07 LOG4    take_data: Calling 'take_data 10 1 SMARTF ON -'
2009-Mar-18 22:11:07 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:11:07 LOG5    begin_task: Level: (3)    ID = <10076>    Status = 0 0 0 0  ok
2009-Mar-18 22:11:07 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.519227 2009.2133453431186 18.999933
2009-Mar-18 22:11:07 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222207  23.106694444444450
2009-Mar-18 22:11:07 LOG4    log_alfabeam: ALFABEAM 1   9.674903893437868  23.005510707006717
2009-Mar-18 22:11:07 LOG4    log_alfabeam: ALFABEAM 2   9.681614107585052  23.036319800080790
2009-Mar-18 22:11:07 LOG4    log_alfabeam: ALFABEAM 3   9.684018892521316  23.137160822100569
2009-Mar-18 22:11:07 LOG4    log_alfabeam: ALFABEAM 4   9.679497333814783  23.208131763766151
2009-Mar-18 22:11:07 LOG4    log_alfabeam: ALFABEAM 5   9.672705751720173  23.176290701512933
2009-Mar-18 22:11:07 LOG4    log_alfabeam: ALFABEAM 6   9.670517599187543  23.074532077926047
2009-Mar-18 22:11:07 INFO2   take_data: Starting WAPP+GALFA scan: 907700171
2009-Mar-18 22:11:08 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:11:08 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:11:08 LOG5    begin_task: Level: (4)    ID = <10077>    Status = 0 0 0 0  ok
2009-Mar-18 22:11:08 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:11:08 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0}
2009-Mar-18 22:11:08 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:11:08 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:11:08 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:11:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.549 (still bad)
2009-Mar-18 22:11:08 INFO1   WAPP=1+2+3+4-start_spectra: start sec 7869.00
2009-Mar-18 22:11:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:11:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:11:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:11:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:11:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:11:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:11:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:11:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:11:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:11:10 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.549 (still bad)
2009-Mar-18 22:11:12 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.554 (still bad)
2009-Mar-18 22:11:14 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.552 (still bad)
2009-Mar-18 22:11:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.553 (still bad)
2009-Mar-18 22:11:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.550 (still bad)
2009-Mar-18 22:11:19 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:11:19 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:11:19 LOG5    end_task: Level: (4)    ID = <10077>    Status = 0 0 0 0  ok
2009-Mar-18 22:11:19 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:11:19 LOG5    end_task: Level: (3)    ID = <10076>    Status = 0 0 0 0  ok
2009-Mar-18 22:11:19 INFO3   smartfreq: Taking CAL-ON at 1381.86076660 MHz ...
2009-Mar-18 22:11:19 LOG4    send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...}
2009-Mar-18 22:11:19 INFO4   set_smart_frequency: Setting frequency 1381.86076660 MHz
2009-Mar-18 22:11:19 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:11:19 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21335 J
2009-Mar-18 22:11:19 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:11:19 LOG2    antvel: Parameters to Doppler: Topocentric 94279 2009 77 0.0
2009-Mar-18 22:11:19 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:11:19 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660
2009-Mar-18 22:11:19 INFO4   dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767
2009-Mar-18 22:11:19 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:11:19 LOG2    dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:11:19 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0}
2009-Mar-18 22:11:19 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:11:19 LOG4    take_data: Calling 'take_data 10 1 SMARTF ON -'
2009-Mar-18 22:11:19 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:11:19 LOG5    begin_task: Level: (3)    ID = <10078>    Status = 0 0 0 0  ok
2009-Mar-18 22:11:19 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.522570 2009.2133457233758 18.999933
2009-Mar-18 22:11:19 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222211  23.106694444444436
2009-Mar-18 22:11:19 LOG4    log_alfabeam: ALFABEAM 1   9.674963819618293  23.005252993719559
2009-Mar-18 22:11:19 LOG4    log_alfabeam: ALFABEAM 2   9.681655429275814  23.036816278732644
2009-Mar-18 22:11:19 LOG4    log_alfabeam: ALFABEAM 3   9.684000794732983  23.137923504429146
2009-Mar-18 22:11:19 LOG4    log_alfabeam: ALFABEAM 4   9.679436986321555  23.208385602138204
2009-Mar-18 22:11:19 LOG4    log_alfabeam: ALFABEAM 5   9.672664395312081  23.175777157501766
2009-Mar-18 22:11:19 LOG4    log_alfabeam: ALFABEAM 6   9.670537085272969  23.073773406207589
2009-Mar-18 22:11:19 INFO2   take_data: Starting WAPP+GALFA scan: 907700172
2009-Mar-18 22:11:20 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:11:20 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:11:20 LOG5    begin_task: Level: (4)    ID = <10079>    Status = 0 0 0 0  ok
2009-Mar-18 22:11:20 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:11:20 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0}
2009-Mar-18 22:11:20 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:11:20 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:11:20 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:11:20 INFO1   WAPP=1+2+3+4-start_spectra: start sec 7881.00
2009-Mar-18 22:11:20 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.553 (still bad)
2009-Mar-18 22:11:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:11:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:11:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:11:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:11:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:11:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:11:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:11:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:11:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:11:22 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.553 (still bad)
2009-Mar-18 22:11:24 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.555 (still bad)
2009-Mar-18 22:11:26 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.559 (still bad)
2009-Mar-18 22:11:28 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.549 (still bad)
2009-Mar-18 22:11:30 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.553 (still bad)
2009-Mar-18 22:11:31 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:11:31 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:11:31 LOG5    end_task: Level: (4)    ID = <10079>    Status = 0 0 0 0  ok
2009-Mar-18 22:11:31 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:11:31 LOG5    end_task: Level: (3)    ID = <10078>    Status = 0 0 0 0  ok
2009-Mar-18 22:11:31 INFO2   smartfreq: Starting smart frequency switching loop 2 of 2
2009-Mar-18 22:11:31 LOG4    send_obs_status: To obs_status: <1> LOOP 2
2009-Mar-18 22:11:31 LOG4    send_obs_status: To obs_status: <1> BITMAP stat_cal_off     INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs}    MESSAGE {Setting CAL-OFF ...}
2009-Mar-18 22:11:31 LOG3    wapp_calcontrol: To CALCONTROL: CALOFF
2009-Mar-18 22:11:31 LOG3    sock_errsend: To CALCONTROL: CALOFF STATUS
2009-Mar-18 22:11:31 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-18 22:11:31 LOG5    begin_task: Level: (3)    ID = <10080>    Status = 0 0 0 0  ok
2009-Mar-18 22:11:31 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-18 22:11:31 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x02
2009-Mar-18 22:11:31 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-18 22:11:31 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-18 22:11:31 LOG5    end_task: Level: (3)    ID = <10080>    Status = 0 0 0 0  ok
2009-Mar-18 22:11:31 LOG4    send_obs_status: To obs_status: <1> TOTALPARTS 2*7
2009-Mar-18 22:11:31 INFO3   smartfreq: Taking CAL-OFF at 1375.80607910 MHz ...
2009-Mar-18 22:11:31 LOG4    send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...}
2009-Mar-18 22:11:31 INFO4   set_smart_frequency: Setting frequency 1375.80607910 MHz
2009-Mar-18 22:11:31 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:11:31 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21335 J
2009-Mar-18 22:11:31 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:11:31 LOG2    antvel: Parameters to Doppler: Topocentric 94291 2009 77 0.0
2009-Mar-18 22:11:31 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:11:31 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910
2009-Mar-18 22:11:31 INFO4   dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079
2009-Mar-18 22:11:31 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:11:31 LOG2    dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:11:31 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0}
2009-Mar-18 22:11:31 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:11:31 LOG4    take_data: Calling 'take_data 10 1 SMARTF OFF -'
2009-Mar-18 22:11:31 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:11:31 LOG5    begin_task: Level: (3)    ID = <10081>    Status = 0 0 0 0  ok
2009-Mar-18 22:11:31 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.525912 2009.2133461036328 18.999933
2009-Mar-18 22:11:31 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222207  23.106694444444450
2009-Mar-18 22:11:31 LOG4    log_alfabeam: ALFABEAM 1   9.675024342712891  23.005000200210237
2009-Mar-18 22:11:31 LOG4    log_alfabeam: ALFABEAM 2   9.681696763070446  23.037321127977684
2009-Mar-18 22:11:31 LOG4    log_alfabeam: ALFABEAM 3   9.683982105129951  23.138689814552684
2009-Mar-18 22:11:31 LOG4    log_alfabeam: ALFABEAM 4   9.679376042902716  23.208634406521384
2009-Mar-18 22:11:31 LOG4    log_alfabeam: ALFABEAM 5   9.672623047299949  23.175255109846141
2009-Mar-18 22:11:31 LOG4    log_alfabeam: ALFABEAM 6   9.670557168278009  23.073011440400347
2009-Mar-18 22:11:31 INFO2   take_data: Starting WAPP+GALFA scan: 907700173
2009-Mar-18 22:11:32 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:11:32 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:11:32 LOG5    begin_task: Level: (4)    ID = <10082>    Status = 0 0 0 0  ok
2009-Mar-18 22:11:32 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:11:32 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0}
2009-Mar-18 22:11:32 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:11:32 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:11:32 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:11:32 INFO1   WAPP=1+2+3+4-start_spectra: start sec 7893.00
2009-Mar-18 22:11:32 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.558 (still bad)
2009-Mar-18 22:11:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:11:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:11:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:11:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:11:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:11:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:11:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:11:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:11:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:11:34 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.498 (still bad)
2009-Mar-18 22:11:36 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.187 (still bad)
2009-Mar-18 22:11:38 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.190 (still bad)
2009-Mar-18 22:11:40 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.189 (still bad)
2009-Mar-18 22:11:42 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.188 (still bad)
2009-Mar-18 22:11:43 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:11:43 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:11:43 LOG5    end_task: Level: (4)    ID = <10082>    Status = 0 0 0 0  ok
2009-Mar-18 22:11:43 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:11:43 LOG5    end_task: Level: (3)    ID = <10081>    Status = 0 0 0 0  ok
2009-Mar-18 22:11:43 INFO3   smartfreq: Taking CAL-OFF at 1378.54045410 MHz ...
2009-Mar-18 22:11:43 LOG4    send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...}
2009-Mar-18 22:11:43 INFO4   set_smart_frequency: Setting frequency 1378.54045410 MHz
2009-Mar-18 22:11:43 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:11:43 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21335 J
2009-Mar-18 22:11:43 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:11:43 LOG2    antvel: Parameters to Doppler: Topocentric 94303 2009 77 0.0
2009-Mar-18 22:11:43 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:11:43 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410
2009-Mar-18 22:11:43 INFO4   dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454
2009-Mar-18 22:11:43 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:11:43 LOG2    dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:11:43 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0}
2009-Mar-18 22:11:43 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:11:43 LOG4    take_data: Calling 'take_data 10 1 SMARTF OFF -'
2009-Mar-18 22:11:43 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:11:43 LOG5    begin_task: Level: (3)    ID = <10083>    Status = 0 0 0 0  ok
2009-Mar-18 22:11:43 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.529255 2009.2133464838898 18.999933
2009-Mar-18 22:11:43 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222191  23.106694444444450
2009-Mar-18 22:11:43 LOG4    log_alfabeam: ALFABEAM 1   9.675085495985568  23.004752359650226
2009-Mar-18 22:11:43 LOG4    log_alfabeam: ALFABEAM 2   9.681738122510044  23.037834705115674
2009-Mar-18 22:11:43 LOG4    log_alfabeam: ALFABEAM 3   9.683962803882986  23.139460081796599
2009-Mar-18 22:11:43 LOG4    log_alfabeam: ALFABEAM 4   9.679314470269356  23.208878140590912
2009-Mar-18 22:11:43 LOG4    log_alfabeam: ALFABEAM 5   9.672581694623148  23.174724196106620
2009-Mar-18 22:11:43 LOG4    log_alfabeam: ALFABEAM 6   9.670577868315014  23.072245859537542
2009-Mar-18 22:11:43 INFO2   take_data: Starting WAPP+GALFA scan: 907700174
2009-Mar-18 22:11:44 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:11:44 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:11:44 LOG5    begin_task: Level: (4)    ID = <10084>    Status = 0 0 0 0  ok
2009-Mar-18 22:11:44 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:11:44 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0}
2009-Mar-18 22:11:44 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:11:44 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:11:44 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:11:44 INFO1   WAPP=1+2+3+4-start_spectra: start sec 7905.00
2009-Mar-18 22:11:45 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.186 (still bad)
2009-Mar-18 22:11:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:11:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:11:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:11:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:11:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:11:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:11:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:11:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:11:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:11:47 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad)
2009-Mar-18 22:11:49 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.113 (still bad)
2009-Mar-18 22:11:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)!
2009-Mar-18 22:11:51 LOG4    check_wapp_levels: WAPP-1 power levels:    1.029  0.951    0.913  1.087
2009-Mar-18 22:11:51 LOG4    check_wapp_levels: WAPP-2 power levels:    1.054  1.012    0.909  0.908
2009-Mar-18 22:11:51 LOG4    check_wapp_levels: WAPP-3 power levels:    0.915  0.995    1.115  0.959
2009-Mar-18 22:11:51 LOG4    check_wapp_levels: WAPP-4 power levels:    0.941  0.107    1.040  0.118
2009-Mar-18 22:11:53 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.115 (still bad)
2009-Mar-18 22:11:55 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad)
2009-Mar-18 22:11:55 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:11:55 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:11:55 LOG5    end_task: Level: (4)    ID = <10084>    Status = 0 0 0 0  ok
2009-Mar-18 22:11:55 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:11:55 LOG5    end_task: Level: (3)    ID = <10083>    Status = 0 0 0 0  ok
2009-Mar-18 22:11:55 INFO3   smartfreq: Taking CAL-OFF at 1378.73576660 MHz ...
2009-Mar-18 22:11:55 LOG4    send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...}
2009-Mar-18 22:11:55 INFO4   set_smart_frequency: Setting frequency 1378.73576660 MHz
2009-Mar-18 22:11:55 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:11:55 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21335 J
2009-Mar-18 22:11:55 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:11:55 LOG2    antvel: Parameters to Doppler: Topocentric 94315 2009 77 0.0
2009-Mar-18 22:11:55 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:11:55 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660
2009-Mar-18 22:11:55 INFO4   dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767
2009-Mar-18 22:11:55 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:11:55 LOG2    dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:11:55 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0}
2009-Mar-18 22:11:55 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:11:55 LOG4    take_data: Calling 'take_data 10 1 SMARTF OFF -'
2009-Mar-18 22:11:55 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:11:55 LOG5    begin_task: Level: (3)    ID = <10085>    Status = 0 0 0 0  ok
2009-Mar-18 22:11:55 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.532597 2009.2133468641468 18.999933
2009-Mar-18 22:11:55 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222207  23.106694444444450
2009-Mar-18 22:11:55 LOG4    log_alfabeam: ALFABEAM 1   9.675147239417713  23.004509806234665
2009-Mar-18 22:11:55 LOG4    log_alfabeam: ALFABEAM 2   9.681779471356965  23.038356753899002
2009-Mar-18 22:11:55 LOG4    log_alfabeam: ALFABEAM 3   9.683942894067378  23.140233710258016
2009-Mar-18 22:11:55 LOG4    log_alfabeam: ALFABEAM 4   9.679252308923385  23.209116471933054
2009-Mar-18 22:11:55 LOG4    log_alfabeam: ALFABEAM 5   9.672540373998773  23.174184688345832
2009-Mar-18 22:11:55 LOG4    log_alfabeam: ALFABEAM 6   9.670599180899242  23.071477262320673
2009-Mar-18 22:11:55 INFO2   take_data: Starting WAPP+GALFA scan: 907700175
2009-Mar-18 22:11:56 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:11:56 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:11:56 LOG5    begin_task: Level: (4)    ID = <10086>    Status = 0 0 0 0  ok
2009-Mar-18 22:11:56 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:11:56 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0}
2009-Mar-18 22:11:56 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:11:56 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:11:56 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:11:56 INFO1   WAPP=1+2+3+4-start_spectra: start sec 7917.00
2009-Mar-18 22:11:57 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad)
2009-Mar-18 22:11:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:11:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:11:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:11:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:11:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:11:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:11:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:11:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:11:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:11:59 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.111 (still bad)
2009-Mar-18 22:12:01 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.111 (still bad)
2009-Mar-18 22:12:03 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.113 (still bad)
2009-Mar-18 22:12:05 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.110 (still bad)
2009-Mar-18 22:12:07 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:12:07 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:12:07 LOG5    end_task: Level: (4)    ID = <10086>    Status = 0 0 0 0  ok
2009-Mar-18 22:12:07 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:12:07 LOG5    end_task: Level: (3)    ID = <10085>    Status = 0 0 0 0  ok
2009-Mar-18 22:12:07 INFO3   smartfreq: Taking CAL-OFF at 1379.32170410 MHz ...
2009-Mar-18 22:12:07 LOG4    send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...}
2009-Mar-18 22:12:07 INFO4   set_smart_frequency: Setting frequency 1379.32170410 MHz
2009-Mar-18 22:12:07 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:12:07 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21335 J
2009-Mar-18 22:12:07 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:12:07 LOG2    antvel: Parameters to Doppler: Topocentric 94327 2009 77 0.0
2009-Mar-18 22:12:07 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:12:07 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410
2009-Mar-18 22:12:07 INFO4   dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704
2009-Mar-18 22:12:07 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:12:07 LOG2    dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:12:07 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0}
2009-Mar-18 22:12:07 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:12:07 LOG4    take_data: Calling 'take_data 10 1 SMARTF OFF -'
2009-Mar-18 22:12:07 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:12:07 LOG5    begin_task: Level: (3)    ID = <10087>    Status = 0 0 0 0  ok
2009-Mar-18 22:12:07 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.535940 2009.2133472444038 18.999933
2009-Mar-18 22:12:07 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222211  23.106694444444447
2009-Mar-18 22:12:07 LOG4    log_alfabeam: ALFABEAM 1   9.675209606034487  23.004272582154162
2009-Mar-18 22:12:07 LOG4    log_alfabeam: ALFABEAM 2   9.681820822558747  23.038887633410766
2009-Mar-18 22:12:07 LOG4    log_alfabeam: ALFABEAM 3   9.683922355479208  23.141011021882214
2009-Mar-18 22:12:07 LOG4    log_alfabeam: ALFABEAM 4   9.679189525827976  23.209349355249401
2009-Mar-18 22:12:07 LOG4    log_alfabeam: ALFABEAM 5   9.672499072973526  23.173636222772583
2009-Mar-18 22:12:07 LOG4    log_alfabeam: ALFABEAM 6   9.670621126478856  23.070705335250025
2009-Mar-18 22:12:07 INFO2   take_data: Starting WAPP+GALFA scan: 907700176
2009-Mar-18 22:12:08 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:12:08 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:12:08 LOG5    begin_task: Level: (4)    ID = <10088>    Status = 0 0 0 0  ok
2009-Mar-18 22:12:08 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.111 (still bad)
2009-Mar-18 22:12:08 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:12:08 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0}
2009-Mar-18 22:12:08 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:12:08 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:12:08 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:12:08 INFO1   WAPP=1+2+3+4-start_spectra: start sec 7929.00
2009-Mar-18 22:12:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:12:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:12:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:12:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:12:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:12:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:12:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:12:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:12:10 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.111 (still bad)
2009-Mar-18 22:12:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:12:12 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.106 (still bad)
2009-Mar-18 22:12:14 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad)
2009-Mar-18 22:12:16 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad)
2009-Mar-18 22:12:18 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad)
2009-Mar-18 22:12:19 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:12:19 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:12:19 LOG5    end_task: Level: (4)    ID = <10088>    Status = 0 0 0 0  ok
2009-Mar-18 22:12:19 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:12:19 LOG5    end_task: Level: (3)    ID = <10087>    Status = 0 0 0 0  ok
2009-Mar-18 22:12:19 INFO3   smartfreq: Taking CAL-OFF at 1380.49357910 MHz ...
2009-Mar-18 22:12:19 LOG4    send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...}
2009-Mar-18 22:12:19 INFO4   set_smart_frequency: Setting frequency 1380.49357910 MHz
2009-Mar-18 22:12:19 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:12:19 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21335 J
2009-Mar-18 22:12:19 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:12:19 LOG2    antvel: Parameters to Doppler: Topocentric 94339 2009 77 0.0
2009-Mar-18 22:12:19 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:12:19 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910
2009-Mar-18 22:12:19 INFO4   dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579
2009-Mar-18 22:12:19 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:12:19 LOG2    dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:12:19 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0}
2009-Mar-18 22:12:19 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:12:19 LOG4    take_data: Calling 'take_data 10 1 SMARTF OFF -'
2009-Mar-18 22:12:19 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:12:19 LOG5    begin_task: Level: (3)    ID = <10089>    Status = 0 0 0 0  ok
2009-Mar-18 22:12:19 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.539282 2009.2133476246611 18.999933
2009-Mar-18 22:12:19 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222193  23.106694444444447
2009-Mar-18 22:12:19 LOG4    log_alfabeam: ALFABEAM 1   9.675272554098301  23.004041017751192
2009-Mar-18 22:12:19 LOG4    log_alfabeam: ALFABEAM 2   9.681862139289684  23.039427068116922
2009-Mar-18 22:12:19 LOG4    log_alfabeam: ALFABEAM 3   9.683901192324246  23.141791404745994
2009-Mar-18 22:12:19 LOG4    log_alfabeam: ALFABEAM 4   9.679126163213875  23.209576462313258
2009-Mar-18 22:12:19 LOG4    log_alfabeam: ALFABEAM 5   9.672457828812854  23.173079091476815
2009-Mar-18 22:12:19 LOG4    log_alfabeam: ALFABEAM 6   9.670643699389663  23.069930692274799
2009-Mar-18 22:12:19 INFO2   take_data: Starting WAPP+GALFA scan: 907700177
2009-Mar-18 22:12:20 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:12:20 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:12:20 LOG5    begin_task: Level: (4)    ID = <10090>    Status = 0 0 0 0  ok
2009-Mar-18 22:12:20 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:12:20 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0}
2009-Mar-18 22:12:20 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:12:20 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:12:20 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:12:20 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad)
2009-Mar-18 22:12:20 INFO1   WAPP=1+2+3+4-start_spectra: start sec 7941.00
2009-Mar-18 22:12:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:12:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:12:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:12:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:12:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:12:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:12:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:12:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:12:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:12:22 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad)
2009-Mar-18 22:12:24 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 22:12:26 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad)
2009-Mar-18 22:12:28 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.103 (still bad)
2009-Mar-18 22:12:30 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad)
2009-Mar-18 22:12:31 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:12:31 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:12:31 LOG5    end_task: Level: (4)    ID = <10090>    Status = 0 0 0 0  ok
2009-Mar-18 22:12:31 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:12:31 LOG5    end_task: Level: (3)    ID = <10089>    Status = 0 0 0 0  ok
2009-Mar-18 22:12:31 INFO3   smartfreq: Taking CAL-OFF at 1380.88420410 MHz ...
2009-Mar-18 22:12:31 LOG4    send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...}
2009-Mar-18 22:12:31 INFO4   set_smart_frequency: Setting frequency 1380.88420410 MHz
2009-Mar-18 22:12:31 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:12:31 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21335 J
2009-Mar-18 22:12:31 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:12:31 LOG2    antvel: Parameters to Doppler: Topocentric 94351 2009 77 0.0
2009-Mar-18 22:12:31 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:12:31 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410
2009-Mar-18 22:12:31 INFO4   dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204
2009-Mar-18 22:12:31 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:12:31 LOG2    dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:12:31 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0}
2009-Mar-18 22:12:31 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:12:31 LOG4    take_data: Calling 'take_data 10 1 SMARTF OFF -'
2009-Mar-18 22:12:31 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:12:31 LOG5    begin_task: Level: (3)    ID = <10091>    Status = 0 0 0 0  ok
2009-Mar-18 22:12:31 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.542625 2009.2133480049181 18.999933
2009-Mar-18 22:12:31 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222230  23.106694444444450
2009-Mar-18 22:12:31 LOG4    log_alfabeam: ALFABEAM 1   9.675336116338386  23.003815163879331
2009-Mar-18 22:12:31 LOG4    log_alfabeam: ALFABEAM 2   9.681903433896050  23.039975418136819
2009-Mar-18 22:12:31 LOG4    log_alfabeam: ALFABEAM 3   9.683879384074478  23.142575172997070
2009-Mar-18 22:12:31 LOG4    log_alfabeam: ALFABEAM 4   9.679062188353514  23.209797739226225
2009-Mar-18 22:12:31 LOG4    log_alfabeam: ALFABEAM 5   9.672416629675681  23.172512930083776
2009-Mar-18 22:12:31 LOG4    log_alfabeam: ALFABEAM 6   9.670666920364585  23.069153027730611
2009-Mar-18 22:12:31 INFO2   take_data: Starting WAPP+GALFA scan: 907700178
2009-Mar-18 22:12:32 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:12:32 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:12:32 LOG5    begin_task: Level: (4)    ID = <10092>    Status = 0 0 0 0  ok
2009-Mar-18 22:12:32 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:12:32 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0}
2009-Mar-18 22:12:32 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:12:32 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:12:32 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:12:32 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 22:12:32 INFO1   WAPP=1+2+3+4-start_spectra: start sec 7953.00
2009-Mar-18 22:12:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:12:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:12:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:12:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:12:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:12:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:12:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:12:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:12:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:12:34 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 22:12:36 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:12:38 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:12:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:12:42 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:12:43 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:12:43 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:12:43 LOG5    end_task: Level: (4)    ID = <10092>    Status = 0 0 0 0  ok
2009-Mar-18 22:12:43 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:12:43 LOG5    end_task: Level: (3)    ID = <10091>    Status = 0 0 0 0  ok
2009-Mar-18 22:12:43 INFO3   smartfreq: Taking CAL-OFF at 1381.86076660 MHz ...
2009-Mar-18 22:12:43 LOG4    send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...}
2009-Mar-18 22:12:43 INFO4   set_smart_frequency: Setting frequency 1381.86076660 MHz
2009-Mar-18 22:12:43 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:12:43 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21335 J
2009-Mar-18 22:12:43 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:12:43 LOG2    antvel: Parameters to Doppler: Topocentric 94363 2009 77 0.0
2009-Mar-18 22:12:43 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:12:43 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660
2009-Mar-18 22:12:43 INFO4   dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767
2009-Mar-18 22:12:43 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:12:43 LOG2    dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:12:43 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0}
2009-Mar-18 22:12:43 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:12:43 LOG4    take_data: Calling 'take_data 10 1 SMARTF OFF -'
2009-Mar-18 22:12:43 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:12:43 LOG5    begin_task: Level: (3)    ID = <10093>    Status = 0 0 0 0  ok
2009-Mar-18 22:12:43 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.545967 2009.2133483851751 18.999933
2009-Mar-18 22:12:43 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222211  23.106694444444447
2009-Mar-18 22:12:43 LOG4    log_alfabeam: ALFABEAM 1   9.675400249262992  23.003595345729320
2009-Mar-18 22:12:43 LOG4    log_alfabeam: ALFABEAM 2   9.681944669016787  23.040532387691094
2009-Mar-18 22:12:43 LOG4    log_alfabeam: ALFABEAM 3   9.683856936157058  23.143361699008199
2009-Mar-18 22:12:43 LOG4    log_alfabeam: ALFABEAM 4   9.678997645240241  23.210012863267217
2009-Mar-18 22:12:43 LOG4    log_alfabeam: ALFABEAM 5   9.672375513317741  23.171938051659779
2009-Mar-18 22:12:43 LOG4    log_alfabeam: ALFABEAM 6   9.670690782471134  23.068372970422370
2009-Mar-18 22:12:43 INFO2   take_data: Starting WAPP+GALFA scan: 907700179
2009-Mar-18 22:12:44 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:12:44 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:12:44 LOG5    begin_task: Level: (4)    ID = <10094>    Status = 0 0 0 0  ok
2009-Mar-18 22:12:44 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:12:44 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0}
2009-Mar-18 22:12:44 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:12:44 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:12:44 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:12:44 INFO1   WAPP=1+2+3+4-start_spectra: start sec 7965.00
2009-Mar-18 22:12:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 22:12:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:12:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:12:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:12:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:12:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:12:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:12:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:12:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:12:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:12:47 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:12:49 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:12:51 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:12:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:12:53 LOG4    check_wapp_levels: WAPP-1 power levels:    1.035  0.943    0.912  1.085
2009-Mar-18 22:12:53 LOG4    check_wapp_levels: WAPP-2 power levels:    1.053  0.995    0.902  0.907
2009-Mar-18 22:12:53 LOG4    check_wapp_levels: WAPP-3 power levels:    0.922  0.999    1.105  0.948
2009-Mar-18 22:12:53 LOG4    check_wapp_levels: WAPP-4 power levels:    0.949  0.108    1.049  0.119
2009-Mar-18 22:12:55 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 22:12:55 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:12:55 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:12:55 LOG5    end_task: Level: (4)    ID = <10094>    Status = 0 0 0 0  ok
2009-Mar-18 22:12:55 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:12:55 LOG5    end_task: Level: (3)    ID = <10093>    Status = 0 0 0 0  ok
2009-Mar-18 22:12:55 LOG4    send_obs_status: To obs_status: <1> BITMAP stat_cal_on    INFO {Making 7 CAL-ONs}    MESSAGE {Setting CAL-ON ...}
2009-Mar-18 22:12:55 LOG3    wapp_calcontrol: To CALCONTROL: CALON
2009-Mar-18 22:12:55 LOG3    sock_errsend: To CALCONTROL: CALON STATUS
2009-Mar-18 22:12:55 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-18 22:12:55 LOG5    begin_task: Level: (3)    ID = <10095>    Status = 0 0 0 0  ok
2009-Mar-18 22:12:55 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-18 22:12:55 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x03
2009-Mar-18 22:12:55 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-18 22:12:55 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-18 22:12:55 LOG5    end_task: Level: (3)    ID = <10095>    Status = 0 0 0 0  ok
2009-Mar-18 22:12:55 INFO3   smartfreq: Taking CAL-ON at 1375.80607910 MHz ...
2009-Mar-18 22:12:55 LOG4    send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...}
2009-Mar-18 22:12:55 INFO4   set_smart_frequency: Setting frequency 1375.80607910 MHz
2009-Mar-18 22:12:55 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:12:55 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21335 J
2009-Mar-18 22:12:55 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:12:55 LOG2    antvel: Parameters to Doppler: Topocentric 94375 2009 77 0.0
2009-Mar-18 22:12:55 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:12:55 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910
2009-Mar-18 22:12:55 INFO4   dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079
2009-Mar-18 22:12:55 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:12:55 LOG2    dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:12:55 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0}
2009-Mar-18 22:12:55 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:12:55 LOG4    take_data: Calling 'take_data 10 1 SMARTF ON -'
2009-Mar-18 22:12:55 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:12:55 LOG5    begin_task: Level: (3)    ID = <10096>    Status = 0 0 0 0  ok
2009-Mar-18 22:12:55 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.549309 2009.2133487654321 18.999933
2009-Mar-18 22:12:55 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222216  23.106694444444450
2009-Mar-18 22:12:55 LOG4    log_alfabeam: ALFABEAM 1   9.675464965798612  23.003381685370002
2009-Mar-18 22:12:55 LOG4    log_alfabeam: ALFABEAM 2   9.681985844084043  23.041098166554228
2009-Mar-18 22:12:55 LOG4    log_alfabeam: ALFABEAM 3   9.683833834784840  23.144151052177083
2009-Mar-18 22:12:55 LOG4    log_alfabeam: ALFABEAM 4   9.678932521083803  23.210221710860370
2009-Mar-18 22:12:55 LOG4    log_alfabeam: ALFABEAM 5   9.672334480773291  23.171354268045707
2009-Mar-18 22:12:55 LOG4    log_alfabeam: ALFABEAM 6   9.670715299237820  23.067590457318563
2009-Mar-18 22:12:55 INFO2   take_data: Starting WAPP+GALFA scan: 907700180
2009-Mar-18 22:12:56 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:12:56 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:12:56 LOG5    begin_task: Level: (4)    ID = <10097>    Status = 0 0 0 0  ok
2009-Mar-18 22:12:56 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:12:56 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0}
2009-Mar-18 22:12:56 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:12:56 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:12:56 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:12:56 INFO1   WAPP=1+2+3+4-start_spectra: start sec 7977.00
2009-Mar-18 22:12:57 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:12:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:12:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:12:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:12:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:12:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:12:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:12:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:12:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:12:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1375.806079 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:12:59 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.664 (still bad)
2009-Mar-18 22:13:01 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.669 (still bad)
2009-Mar-18 22:13:03 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.673 (still bad)
2009-Mar-18 22:13:05 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.666 (still bad)
2009-Mar-18 22:13:07 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:13:07 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:13:07 LOG5    end_task: Level: (4)    ID = <10097>    Status = 0 0 0 0  ok
2009-Mar-18 22:13:07 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:13:07 LOG5    end_task: Level: (3)    ID = <10096>    Status = 0 0 0 0  ok
2009-Mar-18 22:13:07 INFO3   smartfreq: Taking CAL-ON at 1378.54045410 MHz ...
2009-Mar-18 22:13:07 LOG4    send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...}
2009-Mar-18 22:13:07 INFO4   set_smart_frequency: Setting frequency 1378.54045410 MHz
2009-Mar-18 22:13:07 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:13:07 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21335 J
2009-Mar-18 22:13:07 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:13:07 LOG2    antvel: Parameters to Doppler: Topocentric 94387 2009 77 0.0
2009-Mar-18 22:13:07 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:13:07 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410
2009-Mar-18 22:13:07 INFO4   dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454
2009-Mar-18 22:13:07 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:13:07 LOG2    dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:13:07 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0}
2009-Mar-18 22:13:07 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:13:07 LOG4    take_data: Calling 'take_data 10 1 SMARTF ON -'
2009-Mar-18 22:13:07 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:13:07 LOG5    begin_task: Level: (3)    ID = <10098>    Status = 0 0 0 0  ok
2009-Mar-18 22:13:07 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.552652 2009.2133491456891 18.999933
2009-Mar-18 22:13:07 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222213  23.106694444444443
2009-Mar-18 22:13:07 LOG4    log_alfabeam: ALFABEAM 1   9.675530279025411  23.003174312476940
2009-Mar-18 22:13:07 LOG4    log_alfabeam: ALFABEAM 2   9.682026958192846  23.041672949616327
2009-Mar-18 22:13:07 LOG4    log_alfabeam: ALFABEAM 3   9.683810065665790  23.144943299407359
2009-Mar-18 22:13:07 LOG4    log_alfabeam: ALFABEAM 4   9.678866802948043  23.210424150798531
2009-Mar-18 22:13:07 LOG4    log_alfabeam: ALFABEAM 5   9.672293533430368  23.170761386149177
2009-Mar-18 22:13:07 LOG4    log_alfabeam: ALFABEAM 6   9.670740484678563  23.066805428076620
2009-Mar-18 22:13:07 INFO2   take_data: Starting WAPP+GALFA scan: 907700181
2009-Mar-18 22:13:08 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:13:08 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:13:08 LOG5    begin_task: Level: (4)    ID = <10099>    Status = 0 0 0 0  ok
2009-Mar-18 22:13:08 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.667 (still bad)
2009-Mar-18 22:13:08 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:13:08 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0}
2009-Mar-18 22:13:08 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:13:08 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:13:08 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:13:08 INFO1   WAPP=1+2+3+4-start_spectra: start sec 7989.00
2009-Mar-18 22:13:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:13:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:13:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:13:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:13:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:13:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:13:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:13:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:13:10 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.564 (still bad)
2009-Mar-18 22:13:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1378.540454 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:13:12 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.563 (still bad)
2009-Mar-18 22:13:14 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.564 (still bad)
2009-Mar-18 22:13:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.565 (still bad)
2009-Mar-18 22:13:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.565 (still bad)
2009-Mar-18 22:13:19 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:13:19 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:13:19 LOG5    end_task: Level: (4)    ID = <10099>    Status = 0 0 0 0  ok
2009-Mar-18 22:13:19 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:13:19 LOG5    end_task: Level: (3)    ID = <10098>    Status = 0 0 0 0  ok
2009-Mar-18 22:13:19 INFO3   smartfreq: Taking CAL-ON at 1378.73576660 MHz ...
2009-Mar-18 22:13:19 LOG4    send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...}
2009-Mar-18 22:13:19 INFO4   set_smart_frequency: Setting frequency 1378.73576660 MHz
2009-Mar-18 22:13:19 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:13:19 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21335 J
2009-Mar-18 22:13:19 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:13:19 LOG2    antvel: Parameters to Doppler: Topocentric 94399 2009 77 0.0
2009-Mar-18 22:13:19 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:13:19 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660
2009-Mar-18 22:13:19 INFO4   dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767
2009-Mar-18 22:13:19 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:13:19 LOG2    dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:13:19 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0}
2009-Mar-18 22:13:19 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:13:19 LOG4    take_data: Calling 'take_data 10 1 SMARTF ON -'
2009-Mar-18 22:13:19 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:13:19 LOG5    begin_task: Level: (3)    ID = <10100>    Status = 0 0 0 0  ok
2009-Mar-18 22:13:19 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.555994 2009.2133495259463 18.999933
2009-Mar-18 22:13:19 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222188  23.106694444444454
2009-Mar-18 22:13:19 LOG4    log_alfabeam: ALFABEAM 1   9.675596142770610  23.002973541881815
2009-Mar-18 22:13:19 LOG4    log_alfabeam: ALFABEAM 2   9.682067973295787  23.042256409005621
2009-Mar-18 22:13:19 LOG4    log_alfabeam: ALFABEAM 3   9.683785636232118  23.145737790384128
2009-Mar-18 22:13:19 LOG4    log_alfabeam: ALFABEAM 4   9.678800537517130  23.210619871284784
2009-Mar-18 22:13:19 LOG4    log_alfabeam: ALFABEAM 5   9.672252709653147  23.170159752191175
2009-Mar-18 22:13:19 LOG4    log_alfabeam: ALFABEAM 6   9.670766329791515  23.066018532773569
2009-Mar-18 22:13:19 INFO2   take_data: Starting WAPP+GALFA scan: 907700182
2009-Mar-18 22:13:20 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:13:20 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:13:20 LOG5    begin_task: Level: (4)    ID = <10101>    Status = 0 0 0 0  ok
2009-Mar-18 22:13:20 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:13:20 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0}
2009-Mar-18 22:13:20 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:13:20 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:13:20 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:13:20 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.565 (still bad)
2009-Mar-18 22:13:20 INFO1   WAPP=1+2+3+4-start_spectra: start sec 8001.00
2009-Mar-18 22:13:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:13:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:13:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:13:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:13:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:13:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:13:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:13:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:13:22 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1378.735767 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:13:22 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.559 (still bad)
2009-Mar-18 22:13:24 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.560 (still bad)
2009-Mar-18 22:13:26 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.562 (still bad)
2009-Mar-18 22:13:28 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.561 (still bad)
2009-Mar-18 22:13:30 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.562 (still bad)
2009-Mar-18 22:13:31 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:13:31 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:13:31 LOG5    end_task: Level: (4)    ID = <10101>    Status = 0 0 0 0  ok
2009-Mar-18 22:13:31 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:13:31 LOG5    end_task: Level: (3)    ID = <10100>    Status = 0 0 0 0  ok
2009-Mar-18 22:13:31 INFO3   smartfreq: Taking CAL-ON at 1379.32170410 MHz ...
2009-Mar-18 22:13:31 LOG4    send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...}
2009-Mar-18 22:13:31 INFO4   set_smart_frequency: Setting frequency 1379.32170410 MHz
2009-Mar-18 22:13:31 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:13:31 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21335 J
2009-Mar-18 22:13:31 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:13:31 LOG2    antvel: Parameters to Doppler: Topocentric 94411 2009 77 0.0
2009-Mar-18 22:13:31 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:13:31 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410
2009-Mar-18 22:13:31 INFO4   dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704
2009-Mar-18 22:13:31 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:13:31 LOG2    dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:13:31 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0}
2009-Mar-18 22:13:31 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:13:31 LOG4    take_data: Calling 'take_data 10 1 SMARTF ON -'
2009-Mar-18 22:13:31 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:13:31 LOG5    begin_task: Level: (3)    ID = <10102>    Status = 0 0 0 0  ok
2009-Mar-18 22:13:31 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.559337 2009.2133499062033 18.999933
2009-Mar-18 22:13:31 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222175  23.106694444444447
2009-Mar-18 22:13:31 LOG4    log_alfabeam: ALFABEAM 1   9.675662588787311  23.002779443995017
2009-Mar-18 22:13:31 LOG4    log_alfabeam: ALFABEAM 2   9.682108900237051  23.042848904054786
2009-Mar-18 22:13:31 LOG4    log_alfabeam: ALFABEAM 3   9.683760525388855  23.146534818371926
2009-Mar-18 22:13:31 LOG4    log_alfabeam: ALFABEAM 4   9.678733693071395  23.210808799095656
2009-Mar-18 22:13:31 LOG4    log_alfabeam: ALFABEAM 5   9.672211999114880  23.169549003779260
2009-Mar-18 22:13:31 LOG4    log_alfabeam: ALFABEAM 6   9.670792855776728  23.065229486489901
2009-Mar-18 22:13:31 INFO2   take_data: Starting WAPP+GALFA scan: 907700183
2009-Mar-18 22:13:32 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:13:32 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:13:32 LOG5    begin_task: Level: (4)    ID = <10103>    Status = 0 0 0 0  ok
2009-Mar-18 22:13:32 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:13:32 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0}
2009-Mar-18 22:13:32 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:13:32 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:13:32 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:13:32 INFO1   WAPP=1+2+3+4-start_spectra: start sec 8013.00
2009-Mar-18 22:13:32 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.559 (still bad)
2009-Mar-18 22:13:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:13:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:13:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:13:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:13:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:13:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:13:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:13:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:13:34 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1379.321704 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:13:34 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.551 (still bad)
2009-Mar-18 22:13:36 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.555 (still bad)
2009-Mar-18 22:13:38 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.555 (still bad)
2009-Mar-18 22:13:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.549 (still bad)
2009-Mar-18 22:13:42 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.554 (still bad)
2009-Mar-18 22:13:43 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:13:43 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:13:43 LOG5    end_task: Level: (4)    ID = <10103>    Status = 0 0 0 0  ok
2009-Mar-18 22:13:43 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:13:43 LOG5    end_task: Level: (3)    ID = <10102>    Status = 0 0 0 0  ok
2009-Mar-18 22:13:43 INFO3   smartfreq: Taking CAL-ON at 1380.49357910 MHz ...
2009-Mar-18 22:13:43 LOG4    send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...}
2009-Mar-18 22:13:43 INFO4   set_smart_frequency: Setting frequency 1380.49357910 MHz
2009-Mar-18 22:13:43 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:13:43 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21335 J
2009-Mar-18 22:13:43 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:13:43 LOG2    antvel: Parameters to Doppler: Topocentric 94423 2009 77 0.0
2009-Mar-18 22:13:43 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:13:43 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910
2009-Mar-18 22:13:43 INFO4   dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579
2009-Mar-18 22:13:43 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:13:43 LOG2    dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:13:43 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0}
2009-Mar-18 22:13:43 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:13:43 LOG4    take_data: Calling 'take_data 10 1 SMARTF ON -'
2009-Mar-18 22:13:43 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:13:43 LOG5    begin_task: Level: (3)    ID = <10104>    Status = 0 0 0 0  ok
2009-Mar-18 22:13:43 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.562679 2009.2133502864604 18.999933
2009-Mar-18 22:13:43 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222207  23.106694444444443
2009-Mar-18 22:13:43 LOG4    log_alfabeam: ALFABEAM 1   9.675729569094587  23.002592324865660
2009-Mar-18 22:13:43 LOG4    log_alfabeam: ALFABEAM 2   9.682149700601569  23.043450084415337
2009-Mar-18 22:13:43 LOG4    log_alfabeam: ALFABEAM 3   9.683734742020430  23.147333718704644
2009-Mar-18 22:13:43 LOG4    log_alfabeam: ALFABEAM 4   9.678666318107476  23.210990631614074
2009-Mar-18 22:13:43 LOG4    log_alfabeam: ALFABEAM 5   9.672171440488409  23.168929510284862
2009-Mar-18 22:13:43 LOG4    log_alfabeam: ALFABEAM 6   9.670820052141970  23.064438952615827
2009-Mar-18 22:13:43 INFO2   take_data: Starting WAPP+GALFA scan: 907700184
2009-Mar-18 22:13:44 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:13:44 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:13:44 LOG5    begin_task: Level: (4)    ID = <10105>    Status = 0 0 0 0  ok
2009-Mar-18 22:13:44 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:13:44 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0}
2009-Mar-18 22:13:44 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:13:44 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:13:44 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:13:44 INFO1   WAPP=1+2+3+4-start_spectra: start sec 8025.00
2009-Mar-18 22:13:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.553 (still bad)
2009-Mar-18 22:13:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:13:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:13:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:13:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:13:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:13:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:13:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:13:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:13:46 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1380.493579 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:13:47 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.550 (still bad)
2009-Mar-18 22:13:49 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.551 (still bad)
2009-Mar-18 22:13:51 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.553 (still bad)
2009-Mar-18 22:13:53 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.546 (still bad)
2009-Mar-18 22:13:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:13:55 LOG4    check_wapp_levels: WAPP-1 power levels:    1.431  1.290    1.244  1.479
2009-Mar-18 22:13:55 LOG4    check_wapp_levels: WAPP-2 power levels:    1.464  1.393    1.256  1.255
2009-Mar-18 22:13:55 LOG4    check_wapp_levels: WAPP-3 power levels:    1.290  1.397    1.549  1.276
2009-Mar-18 22:13:55 LOG4    check_wapp_levels: WAPP-4 power levels:    1.337  0.108    1.478  0.118
2009-Mar-18 22:13:55 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:13:55 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:13:55 LOG5    end_task: Level: (4)    ID = <10105>    Status = 0 0 0 0  ok
2009-Mar-18 22:13:55 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:13:55 LOG5    end_task: Level: (3)    ID = <10104>    Status = 0 0 0 0  ok
2009-Mar-18 22:13:55 INFO3   smartfreq: Taking CAL-ON at 1380.88420410 MHz ...
2009-Mar-18 22:13:55 LOG4    send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...}
2009-Mar-18 22:13:55 INFO4   set_smart_frequency: Setting frequency 1380.88420410 MHz
2009-Mar-18 22:13:55 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:13:55 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21335 J
2009-Mar-18 22:13:55 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:13:55 LOG2    antvel: Parameters to Doppler: Topocentric 94435 2009 77 0.0
2009-Mar-18 22:13:55 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:13:55 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410
2009-Mar-18 22:13:55 INFO4   dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204
2009-Mar-18 22:13:55 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:13:55 LOG2    dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:13:55 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0}
2009-Mar-18 22:13:55 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:13:55 LOG4    take_data: Calling 'take_data 10 1 SMARTF ON -'
2009-Mar-18 22:13:55 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:13:55 LOG5    begin_task: Level: (3)    ID = <10106>    Status = 0 0 0 0  ok
2009-Mar-18 22:13:55 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.566022 2009.2133506667174 18.999933
2009-Mar-18 22:13:55 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222213  23.106694444444447
2009-Mar-18 22:13:55 LOG4    log_alfabeam: ALFABEAM 1   9.675797114969241  23.002412261675047
2009-Mar-18 22:13:55 LOG4    log_alfabeam: ALFABEAM 2   9.682190384648427  23.044060307744381
2009-Mar-18 22:13:55 LOG4    log_alfabeam: ALFABEAM 3   9.683708264909582  23.148134775943426
2009-Mar-18 22:13:55 LOG4    log_alfabeam: ALFABEAM 4   9.678598381393396  23.211165288967457
2009-Mar-18 22:13:55 LOG4    log_alfabeam: ALFABEAM 5   9.672131024030334  23.168300911481708
2009-Mar-18 22:13:55 LOG4    log_alfabeam: ALFABEAM 6   9.670847940170260  23.063646654782609
2009-Mar-18 22:13:55 INFO2   take_data: Starting WAPP+GALFA scan: 907700185
2009-Mar-18 22:13:56 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:13:56 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:13:56 LOG5    begin_task: Level: (4)    ID = <10107>    Status = 0 0 0 0  ok
2009-Mar-18 22:13:56 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:13:56 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0}
2009-Mar-18 22:13:56 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:13:56 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:13:56 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:13:56 INFO1   WAPP=1+2+3+4-start_spectra: start sec 8037.00
2009-Mar-18 22:13:57 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.553 (still bad)
2009-Mar-18 22:13:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:13:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:13:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:13:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:13:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:13:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:13:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:13:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:13:58 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1380.884204 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:13:59 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.555 (still bad)
2009-Mar-18 22:14:01 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.553 (still bad)
2009-Mar-18 22:14:03 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.559 (still bad)
2009-Mar-18 22:14:05 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.556 (still bad)
2009-Mar-18 22:14:07 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:14:07 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:14:07 LOG5    end_task: Level: (4)    ID = <10107>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:07 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:14:07 LOG5    end_task: Level: (3)    ID = <10106>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:07 INFO3   smartfreq: Taking CAL-ON at 1381.86076660 MHz ...
2009-Mar-18 22:14:07 LOG4    send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...}
2009-Mar-18 22:14:07 INFO4   set_smart_frequency: Setting frequency 1381.86076660 MHz
2009-Mar-18 22:14:07 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:14:07 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21335 J
2009-Mar-18 22:14:07 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:14:07 LOG2    antvel: Parameters to Doppler: Topocentric 94447 2009 77 0.0
2009-Mar-18 22:14:07 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:14:07 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660
2009-Mar-18 22:14:07 INFO4   dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767
2009-Mar-18 22:14:07 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:14:07 LOG2    dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:14:07 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0}
2009-Mar-18 22:14:07 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:14:07 LOG4    take_data: Calling 'take_data 10 1 SMARTF ON -'
2009-Mar-18 22:14:07 START   begin_task: Starting task 'WAPP+GALFA spectral observation'
2009-Mar-18 22:14:07 LOG5    begin_task: Level: (3)    ID = <10108>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:07 LOG5    log_alfabeam: Parameters: 9.6772222222222215 23.106694444444447 9.569364 2009.2133510469744 18.999933
2009-Mar-18 22:14:07 LOG4    log_alfabeam: ALFABEAM 0   9.677222222222206  23.106694444444443
2009-Mar-18 22:14:07 LOG4    log_alfabeam: ALFABEAM 1   9.675865176616853  23.002239550102257
2009-Mar-18 22:14:07 LOG4    log_alfabeam: ALFABEAM 2   9.682230913676710  23.044679200427037
2009-Mar-18 22:14:07 LOG4    log_alfabeam: ALFABEAM 3   9.683681104484108  23.148937311857146
2009-Mar-18 22:14:07 LOG4    log_alfabeam: ALFABEAM 4   9.678529933241386  23.211332479320507
2009-Mar-18 22:14:07 LOG4    log_alfabeam: ALFABEAM 5   9.672090788634584  23.167663600644090
2009-Mar-18 22:14:07 LOG4    log_alfabeam: ALFABEAM 6   9.670876507792453  23.062853268834392
2009-Mar-18 22:14:07 INFO2   take_data: Starting WAPP+GALFA scan: 907700186
2009-Mar-18 22:14:08 LOG4    send_obs_status: To obs_status: <0> TASKTIME 10
2009-Mar-18 22:14:08 START   begin_task: Starting task 'waiting on WAPP+GALFA spectra'
2009-Mar-18 22:14:08 LOG5    begin_task: Level: (4)    ID = <10109>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.553 (still bad)
2009-Mar-18 22:14:08 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:14:08 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0}
2009-Mar-18 22:14:08 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:14:08 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:14:08 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:14:08 INFO1   WAPP=1+2+3+4-start_spectra: start sec 8049.00
2009-Mar-18 22:14:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:14:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:14:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:14:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:14:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:14:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:14:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:14:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:14:10 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.552 (still bad)
2009-Mar-18 22:14:10 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.860767 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:14:12 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.554 (still bad)
2009-Mar-18 22:14:14 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.556 (still bad)
2009-Mar-18 22:14:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.558 (still bad)
2009-Mar-18 22:14:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.554 (still bad)
2009-Mar-18 22:14:19 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:14:19 STOP    end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK'
2009-Mar-18 22:14:19 LOG5    end_task: Level: (4)    ID = <10109>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:19 STOP    end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK'
2009-Mar-18 22:14:19 LOG5    end_task: Level: (3)    ID = <10108>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:19 INFO2   smartfreq: Switching off CAL
2009-Mar-18 22:14:19 LOG3    wapp_calcontrol: To CALCONTROL: CALOFF
2009-Mar-18 22:14:19 LOG3    sock_errsend: To CALCONTROL: CALOFF STATUS
2009-Mar-18 22:14:19 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-18 22:14:19 LOG5    begin_task: Level: (3)    ID = <10110>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:19 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-18 22:14:19 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x02
2009-Mar-18 22:14:19 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-18 22:14:19 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-18 22:14:19 LOG5    end_task: Level: (3)    ID = <10110>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:19 INFO3   restore_frequencies: Restoring original frequencies
2009-Mar-18 22:14:19 LOG5    antvel: Calling 'antvel 94038.000000 230624.100000 J 0'
2009-Mar-18 22:14:19 LOG2    antvel: Precessing RA = 09:40:38.0  Dec = +23:06:24.1  Epoch = 2009.21335 J
2009-Mar-18 22:14:19 LOG2    antvel: Computed apparent RA = 09:41:11.6  Dec = +23:03:47.8
2009-Mar-18 22:14:19 LOG2    antvel: Parameters to Doppler: Topocentric 94459 2009 77 0.0
2009-Mar-18 22:14:19 INFO5   antvel: Computed antenna velocity: +0.00000 km/s
2009-Mar-18 22:14:19 LOG3    dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2
2009-Mar-18 22:14:19 INFO4   dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000
2009-Mar-18 22:14:19 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:14:19 LOG2    dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:14:19 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0}
2009-Mar-18 22:14:19 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:14:19 STOP    finish_task: Finishing task 'smart frequency switching'
2009-Mar-18 22:14:19 LOG5    finish_task: Level: (2)    ID = <10041>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:19 DONE    finish_task: DONE finished pattern: smart frequency switching
2009-Mar-18 22:14:19 LOG4    send_obs_status: To obs_status: <1> ENDTASK Finished
2009-Mar-18 22:14:19 END     end_task: Finishing task 'smart frequency switching' with status 'OK'
2009-Mar-18 22:14:19 LOG5    end_task: Level: (2)    ID = <10041>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:19 NOTE    run_command_file: DONE with command file processing
2009-Mar-18 22:14:19 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Running Command File}
2009-Mar-18 22:14:20 STOP    finish_task: Finishing task 'running command file 'command_galfacurpos.cmd''
2009-Mar-18 22:14:20 LOG5    finish_task: Level: (1)    ID = <10025>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:20 DONE    finish_task: DONE finished running: command file 'command_galfacurpos.cmd'
2009-Mar-18 22:14:20 LOG4    send_obs_status: To obs_status: <1> ENDTASK Finished
2009-Mar-18 22:14:20 END     end_task: Finishing task 'running command file 'command_galfacurpos.cmd'' with status 'OK'
2009-Mar-18 22:14:20 LOG5    end_task: Level: (1)    ID = <10025>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:20 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0}
2009-Mar-18 22:14:20 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:14:20 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:14:20 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:14:20 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.555 (still bad)
2009-Mar-18 22:14:49 INFO1   CIMA-run_command_file: Transferring command file '090318.cmd ' to executive ...
2009-Mar-18 22:14:49 LOG4    exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf}
2009-Mar-18 22:14:49 LOG4    exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5}
2009-Mar-18 22:14:49 LOG4    exec_msg: From OBSERVER: store_command_file_line 3 5 {CATALOG AGESFull.cat}
2009-Mar-18 22:14:49 LOG4    exec_msg: From OBSERVER: store_command_file_line 4 8 {IF LSTSLEW(AGES3193_p2_032) < 094032 THEN}
2009-Mar-18 22:14:49 LOG4    exec_msg: From OBSERVER: store_command_file_line 5 9 {FIXEDDRIFT az=212.28 alfaangle=-10.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_032 ra=95300.00 dec=230630.00}
2009-Mar-18 22:14:49 LOG4    exec_msg: From OBSERVER: store_command_file_line 6 12 {ENDIF}
2009-Mar-18 22:14:49 LOG4    exec_msg: From OBSERVER: store_command_file_line 7 15 {IF LSTSLEW(AGES3193_p2_034) < 100632 THEN}
2009-Mar-18 22:14:49 LOG4    exec_msg: From OBSERVER: store_command_file_line 8 16 {FIXEDDRIFT az=147.43 alfaangle=48.9  epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_034 ra=95300.00 dec=230330.00}
2009-Mar-18 22:14:49 LOG4    exec_msg: From OBSERVER: store_command_file_line 9 19 {ENDIF}
2009-Mar-18 22:14:49 LOG4    exec_msg: From OBSERVER: store_command_file_line 10 22 {IF LSTSLEW(AGES3193_p2_036) < 102932 THEN}
2009-Mar-18 22:14:49 LOG4    exec_msg: From OBSERVER: store_command_file_line 11 23 {FIXEDDRIFT az=120.23 alfaangle=78.4  epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_036 ra=95300.00 dec=230030.00}
2009-Mar-18 22:14:49 LOG4    exec_msg: From OBSERVER: store_command_file_line 12 26 {ENDIF}
2009-Mar-18 22:14:49 LOG4    exec_msg: From OBSERVER: store_command_file_line 13 29 {IF LSTSLEW(AGES3193_p2_038) < 105232 THEN}
2009-Mar-18 22:14:50 LOG4    exec_msg: From OBSERVER: store_command_file_line 14 30 {FIXEDDRIFT az=110.79 alfaangle=-88.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_038 ra=95300.00 dec=225730.00}
2009-Mar-18 22:14:50 LOG4    exec_msg: From OBSERVER: store_command_file_line 15 33 {ENDIF}
2009-Mar-18 22:14:50 COMMAND CIMA-send_to_exec: Sending command to run command file
2009-Mar-18 22:14:50 LOG4    exec_msg: From OBSERVER: run_command_file 090318.cmd  1 1 15
2009-Mar-18 22:14:50 LOG4    run_command_file: Calling 'run_command_file 090318.cmd 1 1 15'
2009-Mar-18 22:14:50 BEGIN   begin_task: Starting task 'running command file '090318.cmd''
2009-Mar-18 22:14:50 LOG5    begin_task: Level: (1)    ID = <10111>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:50 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Running Command File}    INFO {Running command file '090318.cmd' ...}
2009-Mar-18 22:14:50 NOTE    run_command_file: Starting execution of command file '090318.cmd' from line 1
2009-Mar-18 22:14:50 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf'
2009-Mar-18 22:14:50 LOG1    execute_load: Waiting for CIMA frontend to check the IF/LO file
2009-Mar-18 22:14:50 NOTE    CIMA-check_config_file: File 'ages_config.conf' contains an ALFA set-up which will be ignored!
2009-Mar-18 22:14:50 LOG4    exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok
2009-Mar-18 22:14:50 LOG1    execute_load: Waiting for CIMA frontend to load the IF/LO file
2009-Mar-18 22:14:50 NOTE    CIMA-load_config_file: Loading configuration file 'ages_config.conf'
2009-Mar-18 22:14:50 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes"
2009-Mar-18 22:14:50 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard"
2009-Mar-18 22:14:50 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa"
2009-Mar-18 22:14:50 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no"
2009-Mar-18 22:14:50 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no"
2009-Mar-18 22:14:50 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes"
2009-Mar-18 22:14:50 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA"
2009-Mar-18 22:14:50 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786"
2009-Mar-18 22:14:50 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786"
2009-Mar-18 22:14:50 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786"
2009-Mar-18 22:14:50 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786"
2009-Mar-18 22:14:50 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786"
2009-Mar-18 22:14:50 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786"
2009-Mar-18 22:14:50 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100"
2009-Mar-18 22:14:51 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100"
2009-Mar-18 22:14:52 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1"
2009-Mar-18 22:14:52 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1"
2009-Mar-18 22:14:52 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1"
2009-Mar-18 22:14:52 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1"
2009-Mar-18 22:14:52 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level"
2009-Mar-18 22:14:52 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level"
2009-Mar-18 22:14:52 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level"
2009-Mar-18 22:14:52 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level"
2009-Mar-18 22:14:52 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100"
2009-Mar-18 22:14:52 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100"
2009-Mar-18 22:14:52 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100"
2009-Mar-18 22:14:52 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100"
2009-Mar-18 22:14:52 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1"
2009-Mar-18 22:14:52 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1"
2009-Mar-18 22:14:52 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1"
2009-Mar-18 22:14:52 LOG4    exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok
2009-Mar-18 22:14:52 BEGIN   begin_task: Starting task 'configuring IF/LO path'
2009-Mar-18 22:14:52 LOG5    begin_task: Level: (2)    ID = <10112>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:52 INFO1   config_iflo: Starting to configure IF/LO path for ALFA
2009-Mar-18 22:14:52 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT    BITMAP stat_iflo INFO {Setting up the IF/LO path ...}
2009-Mar-18 22:14:52 LOG1    config_iflo: Receiver ALFA already selected
2009-Mar-18 22:14:52 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-18 22:14:52 LOG3    socket_wait: To ALFAMON: NOISE ACTIVE
2009-Mar-18 22:14:52 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-18 22:14:52 LOG5    begin_task: Level: (3)    ID = <10113>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:53 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-18 22:14:53 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-18 22:14:53 LOG5    end_task: Level: (3)    ID = <10113>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:53 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-18 22:14:53 LOG3    to_alfamon: To ALFAMON: NOISE ACTIVE
2009-Mar-18 22:14:53 LOG3    config_iflo: Skipping filter command 'alfafb 1' since system already is properly set
2009-Mar-18 22:14:53 LOG3    send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set
2009-Mar-18 22:14:53 LOG5    send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable
2009-Mar-18 22:14:53 LOG5    send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable
2009-Mar-18 22:14:53 LOG3    send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set
2009-Mar-18 22:14:53 LOG3    send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set
2009-Mar-18 22:14:53 LOG3    send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set
2009-Mar-18 22:14:53 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0}
2009-Mar-18 22:14:53 LOG3    send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set
2009-Mar-18 22:14:53 LOG3    send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set
2009-Mar-18 22:14:53 LOG5    send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable
2009-Mar-18 22:14:53 LOG5    send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable
2009-Mar-18 22:14:53 LOG5    send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable
2009-Mar-18 22:14:53 LOG5    send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable
2009-Mar-18 22:14:53 LOG5    send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable
2009-Mar-18 22:14:53 LOG3    send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set
2009-Mar-18 22:14:53 LOG3    send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set
2009-Mar-18 22:14:53 LOG3    send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set
2009-Mar-18 22:14:53 LOG3    send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set
2009-Mar-18 22:14:53 LOG3    vw_send: To DATATAKING: if2 {if2_gain 8 8}
2009-Mar-18 22:14:53 LOG3    send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set
2009-Mar-18 22:14:53 LOG3    send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set
2009-Mar-18 22:14:53 LOG5    send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable
2009-Mar-18 22:14:53 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:14:53 LOG3    send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set
2009-Mar-18 22:14:53 LOG3    send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set
2009-Mar-18 22:14:53 LOG5    send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable
2009-Mar-18 22:14:53 LOG3    send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set
2009-Mar-18 22:14:53 LOG3    send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set
2009-Mar-18 22:14:53 LOG2    socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE'
2009-Mar-18 22:14:53 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:14:53 START   begin_task: Starting task 'waiting on configuring IF/LO path'
2009-Mar-18 22:14:53 LOG5    begin_task: Level: (3)    ID = <10114>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:53 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0}
2009-Mar-18 22:14:53 LOG4    got_cormsg: From DATATAKING: if2 {if2_gain 8 8}
2009-Mar-18 22:14:53 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:14:53 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:14:53 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:14:53 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:14:53 LOG4    got_cormsg: From DATATAKING: vw% DONE
2009-Mar-18 22:14:53 STOP    end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK'
2009-Mar-18 22:14:53 LOG5    end_task: Level: (3)    ID = <10114>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:53 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path'
2009-Mar-18 22:14:53 STOP    finish_task: Finishing task 'configuring IF/LO path'
2009-Mar-18 22:14:53 LOG5    finish_task: Level: (2)    ID = <10112>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:53 DONE    finish_task: DONE finished configuration: IF/LO path
2009-Mar-18 22:14:53 LOG4    send_obs_status: To obs_status: <1> ENDTASK Finished
2009-Mar-18 22:14:53 END     end_task: Finishing task 'configuring IF/LO path' with status 'OK'
2009-Mar-18 22:14:53 LOG5    end_task: Level: (2)    ID = <10112>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:53 BEGIN   begin_task: Starting task 'configuring WAPPs'
2009-Mar-18 22:14:53 LOG5    begin_task: Level: (2)    ID = <10115>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:53 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr    INFO {Configuring the WAPPs ...}
2009-Mar-18 22:14:53 INFO1   config_wapp_correlator: Starting to configure WAPP as correlator
2009-Mar-18 22:14:54 LOG2    set_cal_source: Setting cal signal control to the WAPPs
2009-Mar-18 22:14:54 START   begin_task: Starting task 'selecting calibration port'
2009-Mar-18 22:14:54 LOG5    begin_task: Level: (3)    ID = <10116>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:54 LOG3    vw_send: To DATATAKING: calport 3
2009-Mar-18 22:14:54 LOG2    socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE'
2009-Mar-18 22:14:54 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:14:54 START   begin_task: Starting task 'waiting on calport'
2009-Mar-18 22:14:54 LOG5    begin_task: Level: (4)    ID = <10117>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:54 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:14:54 LOG4    got_cormsg: From DATATAKING: calport 3
2009-Mar-18 22:14:54 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:14:54 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:14:54 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-18 22:14:54 STOP    end_task: Finishing task 'waiting on calport' with status 'OK'
2009-Mar-18 22:14:54 LOG5    end_task: Level: (4)    ID = <10117>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:54 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'calport'
2009-Mar-18 22:14:54 STOP    end_task: Finishing task 'selecting calibration port' with status 'OK'
2009-Mar-18 22:14:54 LOG5    end_task: Level: (3)    ID = <10116>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:54 LOG3    wapp_calcontrol: To CALCONTROL: CALOFF
2009-Mar-18 22:14:54 LOG3    sock_errsend: To CALCONTROL: CALOFF STATUS
2009-Mar-18 22:14:54 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-18 22:14:54 LOG5    begin_task: Level: (3)    ID = <10118>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:54 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:14:54 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-18 22:14:54 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x02
2009-Mar-18 22:14:54 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-18 22:14:54 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-18 22:14:54 LOG5    end_task: Level: (3)    ID = <10118>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:54 LOG3    send_to_one_wapp: To WAPPCON: VERBOSE 0
2009-Mar-18 22:14:54 LOG3    send_to_one_wapp: To WAPPCON2: VERBOSE 0
2009-Mar-18 22:14:54 LOG3    send_to_one_wapp: To WAPPCON3: VERBOSE 0
2009-Mar-18 22:14:54 LOG3    send_to_one_wapp: To WAPPCON4: VERBOSE 0
2009-Mar-18 22:14:54 LOG3    send_to_one_wapp: To WAPPCON: TIMEOUT 5
2009-Mar-18 22:14:54 LOG3    send_to_one_wapp: To WAPPCON2: TIMEOUT 5
2009-Mar-18 22:14:54 LOG3    send_to_one_wapp: To WAPPCON3: TIMEOUT 5
2009-Mar-18 22:14:54 LOG3    send_to_one_wapp: To WAPPCON4: TIMEOUT 5
2009-Mar-18 22:14:54 LOG3    send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin
2009-Mar-18 22:14:54 LOG3    send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin
2009-Mar-18 22:14:54 LOG3    send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin
2009-Mar-18 22:14:54 LOG3    send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin
2009-Mar-18 22:14:54 LOG3    wapp_calcontrol: To CALCONTROL: TRIGCLOCK
2009-Mar-18 22:14:54 LOG3    sock_errsend: To CALCONTROL: TRIGCLOCK STATUS
2009-Mar-18 22:14:54 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-18 22:14:54 LOG5    begin_task: Level: (3)    ID = <10119>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:54 LOG4    WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0'
2009-Mar-18 22:14:54 LOG4    WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5'
2009-Mar-18 22:14:54 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-18 22:14:54 LOG4    WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin'
2009-Mar-18 22:14:54 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x02
2009-Mar-18 22:14:54 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-18 22:14:54 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-18 22:14:54 LOG5    end_task: Level: (3)    ID = <10119>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:54 LOG3    sock_errsend: To WAPPDATA: FLUSH
2009-Mar-18 22:14:54 STOP    finish_task: Finishing task 'configuring WAPPs'
2009-Mar-18 22:14:54 LOG5    finish_task: Level: (2)    ID = <10115>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:54 DONE    finish_task: DONE finished configuring: the WAPPs in ALFA mode
2009-Mar-18 22:14:54 LOG4    send_obs_status: To obs_status: <1> ENDTASK Finished
2009-Mar-18 22:14:54 END     end_task: Finishing task 'configuring WAPPs' with status 'OK'
2009-Mar-18 22:14:55 LOG5    end_task: Level: (2)    ID = <10115>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:55 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5'
2009-Mar-18 22:14:55 COMMAND run_command_line: EXECUTING command 5: 'CATALOG AGESFull.cat'
2009-Mar-18 22:14:55 INFO1   execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat'
2009-Mar-18 22:14:55 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGES3193_p2_032) < 094032 THEN'
2009-Mar-18 22:14:55 INFO5   is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_032) < 094032
2009-Mar-18 22:14:55 INFO5   is_if_valid: Condition parsed as: 9.6007893333333332 < 9.6755555555555546
2009-Mar-18 22:14:55 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=212.28 alfaangle=-10.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_032 ra=95300.00 dec=230630.00'
2009-Mar-18 22:14:55 LOG2    check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map'
2009-Mar-18 22:14:55 INFO1   WAPPDATA-flush_pending: WAPPDATA ready
2009-Mar-18 22:14:55 WARNING check_obsmode: WARNING failed to get a response from the CIMA frontend when checking options for 'fixed azimuth drift map'!
2009-Mar-18 22:14:55 NOTE    check_obsmode: Assuming that the options are OK
2009-Mar-18 22:14:55 LOG1    fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 212.28 -10.4 hcorcal 5 tracking no first 1 AGES3193_p2_032 95300.00 230630.00 J 8500.0 Heliocentric velocity(optical)'
2009-Mar-18 22:14:55 BEGIN   begin_task: Starting task 'fixed azimuth drift map'
2009-Mar-18 22:14:55 LOG5    begin_task: Level: (2)    ID = <10120>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:55 INFO4   begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'Cur-pos'
2009-Mar-18 22:14:55 INFO1   fixed_driftmap: Starting pattern: Fixed azimuth drift map
2009-Mar-18 22:14:55 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1    INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_032}
2009-Mar-18 22:14:55 INFO3   fixed_driftmap: Sending telescope to Az = 212.28 and ZA = 5.60
2009-Mar-18 22:14:55 LOG3    track_source: Calling 'track_source AGES3193_p2_032 212.28 5.6045071889 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)'
2009-Mar-18 22:14:55 START   begin_task: Starting task 'sending tracking commands'
2009-Mar-18 22:14:55 LOG5    begin_task: Level: (3)    ID = <10121>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:55 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_032}    INFO {Slewing to source 'AGES3193_p2_032' ...}
2009-Mar-18 22:14:55 INFO1   track_source: Starting to track AGES3193_p2_032
2009-Mar-18 22:14:55 LOG3    vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_032"
2009-Mar-18 22:14:55 LOG3    vw_send: To DATATAKING: set ra 212.28
2009-Mar-18 22:14:55 LOG3    vw_send: To DATATAKING: set dec 5.6045071889
2009-Mar-18 22:14:55 LOG3    vw_send: To DATATAKING: pnt tr send
2009-Mar-18 22:14:55 LOG3    vw_send: To DATATAKING: pnt tr 212.28 5.6045071889 -CF
2009-Mar-18 22:14:55 LOG3    vw_send: To DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 22:14:55 STOP    finish_task: Finishing task 'sending tracking commands'
2009-Mar-18 22:14:55 LOG5    finish_task: Level: (3)    ID = <10121>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:55 INFO2   finish_task: DONE finished sending: tracking commands
2009-Mar-18 22:14:55 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:14:55 STOP    end_task: Finishing task 'sending tracking commands' with status 'OK'
2009-Mar-18 22:14:55 LOG5    end_task: Level: (3)    ID = <10121>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:55 START   begin_task: Starting task 'rotate ALFA to -10.4 degrees'
2009-Mar-18 22:14:55 LOG5    begin_task: Level: (3)    ID = <10122>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:55 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA}    INFO {Rotating ALFA to -10.4 degrees ...}
2009-Mar-18 22:14:55 INFO2   rotate_alfa: ALFA commanded to -10.4 degrees
2009-Mar-18 22:14:56 LOG3    sock_errsend: To ALFAMOTOR: POSITION -10.4 REPLY
2009-Mar-18 22:14:56 LOG4    send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...}
2009-Mar-18 22:14:56 START   begin_task: Starting task 'waiting on ALFA rotation'
2009-Mar-18 22:14:56 LOG5    begin_task: Level: (4)    ID = <10123>    Status = 0 0 0 0  ok
2009-Mar-18 22:14:56 LOG4    exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok
2009-Mar-18 22:14:56 LOG4    got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_032"
2009-Mar-18 22:14:56 LOG4    got_cormsg: From DATATAKING: set ra 212.28
2009-Mar-18 22:14:56 LOG4    got_cormsg: From DATATAKING: set dec 5.6045071889
2009-Mar-18 22:14:56 LOG4    got_cormsg: From DATATAKING: vw% 212.28
2009-Mar-18 22:14:56 LOG4    got_cormsg: From DATATAKING: vw% 5.6045071889
2009-Mar-18 22:14:56 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:14:56 LOG4    got_cormsg: From DATATAKING: pnt tr send
2009-Mar-18 22:14:56 LOG4    got_cormsg: From DATATAKING: pnt tr 212.28 5.6045071889 -CF
2009-Mar-18 22:14:56 LOG4    got_cormsg: From DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 22:14:56 LOG4    got_cormsg: From DATATAKING: vw% vw%
2009-Mar-18 22:14:56 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:15:13 LOG4    exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION"
2009-Mar-18 22:15:13 INFO3   alfa_motor: ALFA rotator in-position -10.40 degrees
2009-Mar-18 22:15:13 STOP    end_task: Finishing task 'waiting on ALFA rotation' with status 'OK'
2009-Mar-18 22:15:13 LOG5    end_task: Level: (4)    ID = <10123>    Status = 0 0 0 0  ok
2009-Mar-18 22:15:13 LOG4    send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy
2009-Mar-18 22:15:13 STOP    finish_task: Finishing task 'rotate ALFA to -10.4 degrees'
2009-Mar-18 22:15:13 LOG5    finish_task: Level: (3)    ID = <10122>    Status = 0 0 0 0  ok
2009-Mar-18 22:15:13 INFO2   finish_task: DONE finished configuration: rotating ALFA to -10.4 degrees
2009-Mar-18 22:15:13 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:15:13 STOP    end_task: Finishing task 'rotate ALFA to -10.4 degrees' with status 'OK'
2009-Mar-18 22:15:13 LOG5    end_task: Level: (3)    ID = <10122>    Status = 0 0 0 0  ok
2009-Mar-18 22:15:13 START   begin_task: Starting task 'waiting on telescope'
2009-Mar-18 22:15:13 LOG5    begin_task: Level: (3)    ID = <10124>    Status = 0 0 0 0  ok
2009-Mar-18 22:15:13 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew    INFO {Waiting for telescope to track source ...}
2009-Mar-18 22:15:13 LOG3    waittrk: Start waittrk 5
2009-Mar-18 22:15:13 START   begin_task: Starting task 'waiting on telescope movement'
2009-Mar-18 22:15:13 LOG5    begin_task: Level: (4)    ID = <10125>    Status = 0 0 0 0  ok
2009-Mar-18 22:15:18 STOP    end_task: Finishing task 'waiting on telescope movement' with status 'OK'
2009-Mar-18 22:15:18 LOG5    end_task: Level: (4)    ID = <10125>    Status = 0 0 0 0  ok
2009-Mar-18 22:15:18 START   begin_task: Starting task 'waiting on telescope on source'
2009-Mar-18 22:15:18 LOG5    begin_task: Level: (4)    ID = <10126>    Status = 0 0 0 0  ok
2009-Mar-18 22:15:46 STOP    end_task: Finishing task 'waiting on telescope on source' with status 'OK'
2009-Mar-18 22:15:46 LOG5    end_task: Level: (4)    ID = <10126>    Status = 0 0 0 0  ok
2009-Mar-18 22:15:46 LOG4    send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy
2009-Mar-18 22:15:46 INFO2   waittrk: Now tracking AGES3193_p2_032
2009-Mar-18 22:15:46 LOG4    waittrk: Current telescope position:  Az = 211.87  ZA = 5.62
2009-Mar-18 22:15:46 STOP    finish_task: Finishing task 'waiting on telescope'
2009-Mar-18 22:15:46 LOG5    finish_task: Level: (3)    ID = <10124>    Status = 0 0 0 0  ok
2009-Mar-18 22:15:46 INFO2   finish_task: DONE finished waiting: telescope on source
2009-Mar-18 22:15:46 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:15:46 STOP    end_task: Finishing task 'waiting on telescope' with status 'OK'
2009-Mar-18 22:15:46 LOG5    end_task: Level: (3)    ID = <10124>    Status = 0 0 0 0  ok
2009-Mar-18 22:15:46 START   begin_task: Starting task 'selecting calibration type'
2009-Mar-18 22:15:46 LOG5    begin_task: Level: (3)    ID = <10127>    Status = 0 0 0 0  ok
2009-Mar-18 22:15:46 LOG3    vw_send: To DATATAKING: setcal hcorcal
2009-Mar-18 22:15:46 LOG2    socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE'
2009-Mar-18 22:15:46 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:15:46 START   begin_task: Starting task 'waiting on setcal'
2009-Mar-18 22:15:46 LOG5    begin_task: Level: (4)    ID = <10128>    Status = 0 0 0 0  ok
2009-Mar-18 22:15:46 LOG4    got_cormsg: From DATATAKING: setcal hcorcal
2009-Mar-18 22:15:46 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:15:46 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:15:46 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-18 22:15:46 STOP    end_task: Finishing task 'waiting on setcal' with status 'OK'
2009-Mar-18 22:15:46 LOG5    end_task: Level: (4)    ID = <10128>    Status = 0 0 0 0  ok
2009-Mar-18 22:15:46 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'setcal'
2009-Mar-18 22:15:46 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-18 22:15:46 LOG3    socket_wait: To ALFAMON: CAL HI
2009-Mar-18 22:15:46 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-18 22:15:46 LOG5    begin_task: Level: (4)    ID = <10129>    Status = 0 0 0 0  ok
2009-Mar-18 22:15:46 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:15:47 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-18 22:15:47 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-18 22:15:47 LOG5    end_task: Level: (4)    ID = <10129>    Status = 0 0 0 0  ok
2009-Mar-18 22:15:47 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-18 22:15:47 LOG3    to_alfamon: To ALFAMON: CAL HI
2009-Mar-18 22:15:47 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-18 22:15:47 LOG3    socket_wait: To ALFAMON: NOISE ACTIVE
2009-Mar-18 22:15:47 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-18 22:15:47 LOG5    begin_task: Level: (4)    ID = <10130>    Status = 0 0 0 0  ok
2009-Mar-18 22:15:47 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-18 22:15:47 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-18 22:15:47 LOG5    end_task: Level: (4)    ID = <10130>    Status = 0 0 0 0  ok
2009-Mar-18 22:15:47 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-18 22:15:47 LOG3    to_alfamon: To ALFAMON: NOISE ACTIVE
2009-Mar-18 22:15:47 STOP    end_task: Finishing task 'selecting calibration type' with status 'OK'
2009-Mar-18 22:15:47 LOG5    end_task: Level: (3)    ID = <10127>    Status = 0 0 0 0  ok
2009-Mar-18 22:15:47 LOG4    send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time}
2009-Mar-18 22:15:47 INFO2   astwait: Waiting for 223 seconds from 02:15:47 to 02:19:30 UTC ...
2009-Mar-18 22:15:47 LOG4    send_obs_status: To obs_status: <1> TASKTIME 223 BITMAP stat_wait MESSAGE {Waiting ...}
2009-Mar-18 22:15:47 START   begin_task: Starting task 'waiting on waiting for AST time'
2009-Mar-18 22:15:47 LOG5    begin_task: Level: (3)    ID = <10131>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:30 STOP    end_task: Finishing task 'waiting on waiting for AST time' with status 'OK'
2009-Mar-18 22:19:30 LOG5    end_task: Level: (3)    ID = <10131>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:30 INFO3   astwait: Finished waiting
2009-Mar-18 22:19:30 LOG4    send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy
2009-Mar-18 22:19:30 LOG5    dopset_later: Calling 'dopset_later 60.66505351656064'
2009-Mar-18 22:19:30 INFO3   dopset_later: Setting Doppler correction for 22:20:30 (60.7 seconds from now)
2009-Mar-18 22:19:30 LOG5    antvel: Calling 'antvel 212.280000 5.604507 F 60.66505351656064'
2009-Mar-18 22:19:30 LOG2    antvel: Transforming current Az = 212.28  ZA = 5.60 to apparent RA = 09:53:33.2  Dec = +23:03:47.5
2009-Mar-18 22:19:30 LOG2    antvel: Parameters to Doppler: Heliocentric 94830 2009 77 0.0
2009-Mar-18 22:19:30 INFO5   antvel: Computed antenna velocity: +16.91016 km/s
2009-Mar-18 22:19:30 LOG3    dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=16.910158323299999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786
2009-Mar-18 22:19:30 INFO4   dopset_gen: New sky frequencies: 1381.165522 1381.165522 1381.165522 1381.165522 1381.165522 1381.165522 1381.165522 1381.165522 1381.165522
2009-Mar-18 22:19:30 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1381.165522 sky0=1381.165522 sky1=1381.165522 sky2=1381.165522 sky3=1381.165522 sky4=1381.165522 sky5=1381.165522 sky6=1381.165522 sky7=1381.165522 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:19:30 LOG2    dopset_gen: Result from 'sky2syn': 1631.165522 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:19:30 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1631165522.0}
2009-Mar-18 22:19:30 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:19:30 LOG4    send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation}
2009-Mar-18 22:19:30 INFO3   fixed_driftmap: Switching to tracking mode for calibration
2009-Mar-18 22:19:30 INFO5   fixed_driftmap: Tracking J2000 position:  RA = 09:52:04.4  Dec = +23:06:24.2
2009-Mar-18 22:19:30 LOG3    track_source: Calling 'track_source AGES3193_p2_032 095204.4 230624.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)'
2009-Mar-18 22:19:30 START   begin_task: Starting task 'sending tracking commands'
2009-Mar-18 22:19:30 LOG5    begin_task: Level: (3)    ID = <10132>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:30 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_032}    INFO {Slewing to source 'AGES3193_p2_032' ...}
2009-Mar-18 22:19:30 INFO1   track_source: Starting to track AGES3193_p2_032
2009-Mar-18 22:19:30 LOG3    vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_032"
2009-Mar-18 22:19:30 LOG3    vw_send: To DATATAKING: set ra 095204.4
2009-Mar-18 22:19:30 LOG3    vw_send: To DATATAKING: set dec 230624.2
2009-Mar-18 22:19:30 LOG3    vw_send: To DATATAKING: pnt tr send
2009-Mar-18 22:19:30 LOG3    vw_send: To DATATAKING: pnt tr 095204.4 230624.2 -CJ
2009-Mar-18 22:19:30 LOG3    vw_send: To DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 22:19:30 STOP    finish_task: Finishing task 'sending tracking commands'
2009-Mar-18 22:19:30 LOG5    finish_task: Level: (3)    ID = <10132>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:30 INFO2   finish_task: DONE finished sending: tracking commands
2009-Mar-18 22:19:30 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:19:30 STOP    end_task: Finishing task 'sending tracking commands' with status 'OK'
2009-Mar-18 22:19:30 LOG5    end_task: Level: (3)    ID = <10132>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:30 START   begin_task: Starting task 'waiting on telescope'
2009-Mar-18 22:19:30 LOG5    begin_task: Level: (3)    ID = <10133>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:30 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew    INFO {Waiting for telescope to track source ...}
2009-Mar-18 22:19:30 LOG3    waittrk: Start waittrk 5
2009-Mar-18 22:19:30 START   begin_task: Starting task 'waiting on telescope movement'
2009-Mar-18 22:19:30 LOG5    begin_task: Level: (4)    ID = <10134>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:30 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1631165522.0}
2009-Mar-18 22:19:30 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:19:30 LOG4    got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_032"
2009-Mar-18 22:19:30 LOG4    got_cormsg: From DATATAKING: set ra 095204.4
2009-Mar-18 22:19:30 LOG4    got_cormsg: From DATATAKING: set dec 230624.2
2009-Mar-18 22:19:30 LOG4    got_cormsg: From DATATAKING: vw% vw%
2009-Mar-18 22:19:30 LOG4    got_cormsg: From DATATAKING: vw% 095204.4
2009-Mar-18 22:19:30 LOG4    got_cormsg: From DATATAKING: vw% 230624.2
2009-Mar-18 22:19:30 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:19:30 LOG4    got_cormsg: From DATATAKING: pnt tr send
2009-Mar-18 22:19:30 LOG4    got_cormsg: From DATATAKING: pnt tr 095204.4 230624.2 -CJ
2009-Mar-18 22:19:30 LOG4    got_cormsg: From DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 22:19:30 LOG4    got_cormsg: From DATATAKING: vw% vw%
2009-Mar-18 22:19:30 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:19:35 STOP    end_task: Finishing task 'waiting on telescope movement' with status 'OK'
2009-Mar-18 22:19:35 LOG5    end_task: Level: (4)    ID = <10134>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:35 START   begin_task: Starting task 'waiting on telescope on source'
2009-Mar-18 22:19:35 LOG5    begin_task: Level: (4)    ID = <10135>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:41 STOP    end_task: Finishing task 'waiting on telescope on source' with status 'OK'
2009-Mar-18 22:19:41 LOG5    end_task: Level: (4)    ID = <10135>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:41 LOG4    send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy
2009-Mar-18 22:19:41 INFO2   waittrk: Now tracking AGES3193_p2_032
2009-Mar-18 22:19:41 LOG4    waittrk: Current telescope position:  Az = 211.62  ZA = 5.60
2009-Mar-18 22:19:41 STOP    finish_task: Finishing task 'waiting on telescope'
2009-Mar-18 22:19:41 LOG5    finish_task: Level: (3)    ID = <10133>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:41 INFO2   finish_task: DONE finished waiting: telescope on source
2009-Mar-18 22:19:41 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:19:41 STOP    end_task: Finishing task 'waiting on telescope' with status 'OK'
2009-Mar-18 22:19:41 LOG5    end_task: Level: (3)    ID = <10133>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:41 START   begin_task: Starting task 'adjusting WAPP power'
2009-Mar-18 22:19:41 LOG5    begin_task: Level: (3)    ID = <10136>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:41 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT    BITMAP stat_power INFO {Adjusting WAPP power ...}
2009-Mar-18 22:19:41 INFO2   adjust_power: Starting to adjust WAPP power
2009-Mar-18 22:19:41 LOG3    vw_send: To DATATAKING: adjpwrif2 
2009-Mar-18 22:19:41 LOG2    socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE'
2009-Mar-18 22:19:41 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:19:41 START   begin_task: Starting task 'waiting on adjpwrif2'
2009-Mar-18 22:19:41 LOG5    begin_task: Level: (4)    ID = <10137>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:41 LOG4    got_cormsg: From DATATAKING: adjpwrif2
2009-Mar-18 22:19:41 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:19:45 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:19:45 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-18 22:19:45 STOP    end_task: Finishing task 'waiting on adjpwrif2' with status 'OK'
2009-Mar-18 22:19:45 LOG5    end_task: Level: (4)    ID = <10137>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:45 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2'
2009-Mar-18 22:19:45 START   begin_task: Starting task 'adjusting WAPP power'
2009-Mar-18 22:19:45 LOG5    begin_task: Level: (4)    ID = <10138>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:45 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT    BITMAP stat_power INFO {Adjusting power ...}
2009-Mar-18 22:19:45 LOG3    sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-18 22:19:45 LOG3    sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-18 22:19:45 LOG3    sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-18 22:19:45 LOG3    sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-18 22:19:45 START   begin_task: Starting task 'waiting on adjust WAPP power'
2009-Mar-18 22:19:45 LOG5    begin_task: Level: (5)    ID = <10139>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:45 LOG4    WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1'
2009-Mar-18 22:19:45 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:19:45 INFO2   WAPP=1-auto_atten_dual: Attenuators beam 0:  7  6 dB  ---  beam 1:  7  6 dB
2009-Mar-18 22:19:45 INFO2   WAPP=3-auto_atten_dual: Attenuators beam 4:  3  1 dB  ---  beam 5:  5  4 dB
2009-Mar-18 22:19:45 INFO2   WAPP=2-auto_atten_dual: Attenuators beam 2:  6  4 dB  ---  beam 3:  4  3 dB
2009-Mar-18 22:19:45 INFO2   WAPP=4-auto_atten_dual: Attenuators beam 6:  3  0 dB  ---  beam 7:  2  0 dB
2009-Mar-18 22:19:45 INFO1   WAPP=1+2+3+4-adjust_power: DONE adjusting power
2009-Mar-18 22:19:45 STOP    end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK'
2009-Mar-18 22:19:45 LOG5    end_task: Level: (5)    ID = <10139>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:45 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 0:  1.042  0.939    ALFA beam 1:  0.917  1.073
2009-Mar-18 22:19:45 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 2:  1.057  1.000    ALFA beam 3:  0.911  0.910
2009-Mar-18 22:19:45 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 4:  0.924  0.996    ALFA beam 5:  1.116  0.952
2009-Mar-18 22:19:45 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 6:  0.968  0.108    ALFA beam 7:  1.069  0.119
2009-Mar-18 22:19:45 STOP    finish_task: Finishing task 'adjusting WAPP power'
2009-Mar-18 22:19:45 LOG5    finish_task: Level: (4)    ID = <10138>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:45 INFO3   finish_task: DONE finished adjusting: WAPP power
2009-Mar-18 22:19:45 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:19:45 STOP    end_task: Finishing task 'adjusting WAPP power' with status 'OK'
2009-Mar-18 22:19:45 LOG5    end_task: Level: (4)    ID = <10138>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:45 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_busy
2009-Mar-18 22:19:45 STOP    finish_task: Finishing task 'adjusting WAPP power'
2009-Mar-18 22:19:45 LOG5    finish_task: Level: (3)    ID = <10136>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:45 INFO2   finish_task: DONE finished adjusting: WAPP power levels
2009-Mar-18 22:19:45 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:19:45 STOP    end_task: Finishing task 'adjusting WAPP power' with status 'OK'
2009-Mar-18 22:19:45 LOG5    end_task: Level: (3)    ID = <10136>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:46 LOG3    send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin
2009-Mar-18 22:19:46 LOG3    send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin
2009-Mar-18 22:19:46 LOG3    send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin
2009-Mar-18 22:19:46 LOG3    send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin
2009-Mar-18 22:19:46 LOG2    take_cal: Calling 'take_cal hcorcal 5 0'
2009-Mar-18 22:19:46 START   begin_task: Starting task 'WAPP calibration'
2009-Mar-18 22:19:46 LOG5    begin_task: Level: (3)    ID = <10140>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:46 LOG4    send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration}    INFO {Making WAPP calibration ...}
2009-Mar-18 22:19:46 START   begin_task: Starting task 'selecting calibration type'
2009-Mar-18 22:19:46 LOG5    begin_task: Level: (4)    ID = <10141>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:46 LOG3    vw_send: To DATATAKING: setcal hcorcal
2009-Mar-18 22:19:46 LOG2    socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE'
2009-Mar-18 22:19:46 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:19:46 START   begin_task: Starting task 'waiting on setcal'
2009-Mar-18 22:19:46 LOG5    begin_task: Level: (5)    ID = <10142>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:46 LOG4    WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin'
2009-Mar-18 22:19:46 LOG4    got_cormsg: From DATATAKING: setcal hcorcal
2009-Mar-18 22:19:46 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:19:46 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:19:46 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-18 22:19:46 STOP    end_task: Finishing task 'waiting on setcal' with status 'OK'
2009-Mar-18 22:19:46 LOG5    end_task: Level: (5)    ID = <10142>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:46 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'setcal'
2009-Mar-18 22:19:46 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-18 22:19:46 LOG3    socket_wait: To ALFAMON: CAL HI
2009-Mar-18 22:19:46 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-18 22:19:46 LOG5    begin_task: Level: (5)    ID = <10143>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:46 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:19:46 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-18 22:19:46 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-18 22:19:46 LOG5    end_task: Level: (5)    ID = <10143>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:46 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-18 22:19:46 LOG3    to_alfamon: To ALFAMON: CAL HI
2009-Mar-18 22:19:46 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-18 22:19:46 LOG3    socket_wait: To ALFAMON: NOISE ACTIVE
2009-Mar-18 22:19:46 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-18 22:19:46 LOG5    begin_task: Level: (5)    ID = <10144>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:46 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-18 22:19:46 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-18 22:19:46 LOG5    end_task: Level: (5)    ID = <10144>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:46 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-18 22:19:46 LOG3    to_alfamon: To ALFAMON: NOISE ACTIVE
2009-Mar-18 22:19:46 STOP    end_task: Finishing task 'selecting calibration type' with status 'OK'
2009-Mar-18 22:19:46 LOG5    end_task: Level: (4)    ID = <10141>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:46 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...}
2009-Mar-18 22:19:46 LOG3    wapp_calcontrol: To CALCONTROL: CALON
2009-Mar-18 22:19:46 LOG3    sock_errsend: To CALCONTROL: CALON STATUS
2009-Mar-18 22:19:46 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-18 22:19:46 LOG5    begin_task: Level: (4)    ID = <10145>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:46 NOTE    WAPPDATA-new_file: New FITS file: wapp.20090318.a2048.0001.fits
2009-Mar-18 22:19:46 LOG4    send_obs_status: To obs_status: <0> FILENAME {wapp.20090318.a2048.0001.fits}
2009-Mar-18 22:19:46 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-18 22:19:46 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x03
2009-Mar-18 22:19:46 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-18 22:19:46 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-18 22:19:46 LOG5    end_task: Level: (4)    ID = <10145>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:46 LOG4    send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...}
2009-Mar-18 22:19:46 LOG4    take_data: Calling 'take_data 5 5 CAL ON -'
2009-Mar-18 22:19:46 START   begin_task: Starting task 'WAPP spectral observation'
2009-Mar-18 22:19:46 LOG5    begin_task: Level: (4)    ID = <10146>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:46 LOG5    log_alfabeam: Parameters: 9.8678888888888885 23.106722222222228 9.663789 2009.2133617892362 -10.400048
2009-Mar-18 22:19:46 LOG4    log_alfabeam: ALFABEAM 0   9.867888888888887  23.106722222222231
2009-Mar-18 22:19:46 LOG4    log_alfabeam: ALFABEAM 1   9.868229046843906  23.006546680707341
2009-Mar-18 22:19:46 LOG4    log_alfabeam: ALFABEAM 2   9.874106043400866  23.073228578171065
2009-Mar-18 22:19:46 LOG4    log_alfabeam: ALFABEAM 3   9.873745617778335  23.174019410052271
2009-Mar-18 22:19:46 LOG4    log_alfabeam: ALFABEAM 4   9.867418698618554  23.207305921983366
2009-Mar-18 22:19:46 LOG4    log_alfabeam: ALFABEAM 5   9.861649444856987  23.138611279174622
2009-Mar-18 22:19:46 LOG4    log_alfabeam: ALFABEAM 6   9.862098451962064  23.038637070506255
2009-Mar-18 22:19:46 INFO2   take_data: Starting WAPP scan: 907700187
2009-Mar-18 22:19:47 LOG4    send_obs_status: To obs_status: <0> TASKTIME 5
2009-Mar-18 22:19:47 START   begin_task: Starting task 'waiting on WAPP spectra'
2009-Mar-18 22:19:47 LOG5    begin_task: Level: (5)    ID = <10147>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:47 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:19:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:19:47 LOG4    check_wapp_levels: WAPP-1 power levels:    1.042  0.939    0.917  1.073
2009-Mar-18 22:19:47 LOG4    check_wapp_levels: WAPP-2 power levels:    1.057  1.000    0.911  0.910
2009-Mar-18 22:19:47 LOG4    check_wapp_levels: WAPP-3 power levels:    0.924  0.996    1.116  0.952
2009-Mar-18 22:19:47 LOG4    check_wapp_levels: WAPP-4 power levels:    0.968  0.108    1.069  0.119
2009-Mar-18 22:19:47 INFO1   WAPP=1+2+3+4-start_spectra: start sec 8388.00
2009-Mar-18 22:19:53 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.165522 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:19:53 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.165522 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:19:53 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.165522 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:19:53 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.165522 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:19:53 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.165522 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:19:53 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.165522 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:19:53 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.165522 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:19:53 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.165522 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:19:53 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.165522 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:19:53 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.563 (still bad)
2009-Mar-18 22:19:53 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:19:53 STOP    end_task: Finishing task 'waiting on WAPP spectra' with status 'OK'
2009-Mar-18 22:19:53 LOG5    end_task: Level: (5)    ID = <10147>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:53 STOP    end_task: Finishing task 'WAPP spectral observation' with status 'OK'
2009-Mar-18 22:19:53 LOG5    end_task: Level: (4)    ID = <10146>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:53 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...}
2009-Mar-18 22:19:53 LOG3    wapp_calcontrol: To CALCONTROL: CALOFF
2009-Mar-18 22:19:53 LOG3    sock_errsend: To CALCONTROL: CALOFF STATUS
2009-Mar-18 22:19:53 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-18 22:19:53 LOG5    begin_task: Level: (4)    ID = <10148>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:53 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-18 22:19:53 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x02
2009-Mar-18 22:19:53 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-18 22:19:53 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-18 22:19:53 LOG5    end_task: Level: (4)    ID = <10148>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:53 LOG4    send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...}
2009-Mar-18 22:19:53 LOG4    take_data: Calling 'take_data 5 5 CAL OFF -'
2009-Mar-18 22:19:53 START   begin_task: Starting task 'WAPP spectral observation'
2009-Mar-18 22:19:53 LOG5    begin_task: Level: (4)    ID = <10149>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:53 LOG5    log_alfabeam: Parameters: 9.8678888888888885 23.106722222222228 9.665738 2009.2133620110528 -10.400048
2009-Mar-18 22:19:53 LOG4    log_alfabeam: ALFABEAM 0   9.867888888888874  23.106722222222242
2009-Mar-18 22:19:53 LOG4    log_alfabeam: ALFABEAM 1   9.868259686450340  23.006568066344499
2009-Mar-18 22:19:53 LOG4    log_alfabeam: ALFABEAM 2   9.874116276533751  23.073591111264026
2009-Mar-18 22:19:53 LOG4    log_alfabeam: ALFABEAM 3   9.873724926381225  23.174360983117676
2009-Mar-18 22:19:53 LOG4    log_alfabeam: ALFABEAM 4   9.867387546583874  23.207277970019501
2009-Mar-18 22:19:53 LOG4    log_alfabeam: ALFABEAM 5   9.861639668392048  23.138243363037052
2009-Mar-18 22:19:53 LOG4    log_alfabeam: ALFABEAM 6   9.862119538981794  23.038297445457221
2009-Mar-18 22:19:53 INFO2   take_data: Starting WAPP scan: 907700188
2009-Mar-18 22:19:54 LOG4    send_obs_status: To obs_status: <0> TASKTIME 5
2009-Mar-18 22:19:54 START   begin_task: Starting task 'waiting on WAPP spectra'
2009-Mar-18 22:19:54 LOG5    begin_task: Level: (5)    ID = <10150>    Status = 0 0 0 0  ok
2009-Mar-18 22:19:54 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:19:54 INFO1   WAPP=1+2+3+4-start_spectra: start sec 8395.00
2009-Mar-18 22:19:59 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.563 (still bad)
2009-Mar-18 22:20:00 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.165522 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:20:00 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.165522 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:20:00 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.165522 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:20:00 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.165522 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:20:00 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.165522 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:20:00 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.165522 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:20:00 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.165522 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:20:00 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.165522 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:20:00 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.165522 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:20:00 INFO1   WAPP=1+2+3+4-start_spectra: Skipping Tsys
2009-Mar-18 22:20:00 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:20:00 STOP    end_task: Finishing task 'waiting on WAPP spectra' with status 'OK'
2009-Mar-18 22:20:00 LOG5    end_task: Level: (5)    ID = <10150>    Status = 0 0 0 0  ok
2009-Mar-18 22:20:00 STOP    end_task: Finishing task 'WAPP spectral observation' with status 'OK'
2009-Mar-18 22:20:00 LOG5    end_task: Level: (4)    ID = <10149>    Status = 0 0 0 0  ok
2009-Mar-18 22:20:00 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_busy
2009-Mar-18 22:20:00 STOP    finish_task: Finishing task 'WAPP calibration'
2009-Mar-18 22:20:00 LOG5    finish_task: Level: (3)    ID = <10140>    Status = 0 0 0 0  ok
2009-Mar-18 22:20:00 INFO2   finish_task: DONE finished calibration: WAPP calibration
2009-Mar-18 22:20:00 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:20:00 STOP    end_task: Finishing task 'WAPP calibration' with status 'OK'
2009-Mar-18 22:20:00 LOG5    end_task: Level: (3)    ID = <10140>    Status = 0 0 0 0  ok
2009-Mar-18 22:20:01 LOG4    send_obs_status: To obs_status: <1> INFO {Returning to drift position}
2009-Mar-18 22:20:01 INFO4   fixed_driftmap: Sending telescope back to drift position Az = 212.28 and ZA = 5.60
2009-Mar-18 22:20:01 LOG3    track_source: Calling 'track_source AGES3193_p2_032 212.28 5.6045071889 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)'
2009-Mar-18 22:20:01 START   begin_task: Starting task 'sending tracking commands'
2009-Mar-18 22:20:01 LOG5    begin_task: Level: (3)    ID = <10151>    Status = 0 0 0 0  ok
2009-Mar-18 22:20:01 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_032}    INFO {Slewing to source 'AGES3193_p2_032' ...}
2009-Mar-18 22:20:01 INFO1   track_source: Starting to track AGES3193_p2_032
2009-Mar-18 22:20:01 LOG3    vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_032"
2009-Mar-18 22:20:01 LOG3    vw_send: To DATATAKING: set ra 212.28
2009-Mar-18 22:20:01 LOG3    vw_send: To DATATAKING: set dec 5.6045071889
2009-Mar-18 22:20:01 LOG3    vw_send: To DATATAKING: pnt tr send
2009-Mar-18 22:20:01 LOG3    vw_send: To DATATAKING: pnt tr 212.28 5.6045071889 -CF
2009-Mar-18 22:20:01 LOG3    vw_send: To DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 22:20:01 STOP    finish_task: Finishing task 'sending tracking commands'
2009-Mar-18 22:20:01 LOG5    finish_task: Level: (3)    ID = <10151>    Status = 0 0 0 0  ok
2009-Mar-18 22:20:01 INFO2   finish_task: DONE finished sending: tracking commands
2009-Mar-18 22:20:01 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:20:01 STOP    end_task: Finishing task 'sending tracking commands' with status 'OK'
2009-Mar-18 22:20:01 LOG5    end_task: Level: (3)    ID = <10151>    Status = 0 0 0 0  ok
2009-Mar-18 22:20:01 LOG1    fixed_driftmap: Parameters: HA = -00:12:59.9  Start = 09:40:33.4  LST = 09:40:03.7  diff = 29.7 secs
2009-Mar-18 22:20:01 INFO2   fixed_driftmap: Waiting 27.7 seconds for RA 9:53:33
2009-Mar-18 22:20:01 INFO2   lstwait: Waiting for 27.7 secs from LST 09:40:04 to LST 09:40:31 ...
2009-Mar-18 22:20:01 LOG4    send_obs_status: To obs_status: <1> TASKTIME 27.672981701517827 BITMAP stat_wait MESSAGE {Waiting ...}
2009-Mar-18 22:20:01 START   begin_task: Starting task 'waiting on wait on LST'
2009-Mar-18 22:20:01 LOG5    begin_task: Level: (3)    ID = <10152>    Status = 0 0 0 0  ok
2009-Mar-18 22:20:01 LOG4    got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_032"
2009-Mar-18 22:20:01 LOG4    got_cormsg: From DATATAKING: set ra 212.28
2009-Mar-18 22:20:01 LOG4    got_cormsg: From DATATAKING: set dec 5.6045071889
2009-Mar-18 22:20:01 LOG4    got_cormsg: From DATATAKING: vw% 212.28
2009-Mar-18 22:20:01 LOG4    got_cormsg: From DATATAKING: vw% 5.6045071889
2009-Mar-18 22:20:01 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:20:01 LOG4    got_cormsg: From DATATAKING: pnt tr send
2009-Mar-18 22:20:01 LOG4    got_cormsg: From DATATAKING: pnt tr 212.28 5.6045071889 -CF
2009-Mar-18 22:20:01 LOG4    got_cormsg: From DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 22:20:01 LOG4    got_cormsg: From DATATAKING: vw% vw%
2009-Mar-18 22:20:01 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:20:05 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 22:20:29 STOP    end_task: Finishing task 'waiting on wait on LST' with status 'OK'
2009-Mar-18 22:20:29 LOG5    end_task: Level: (3)    ID = <10152>    Status = 0 0 0 0  ok
2009-Mar-18 22:20:29 LOG4    lstwait: Finished waiting 0.33 seconds late
2009-Mar-18 22:20:29 INFO3   lstwait: Finished waiting
2009-Mar-18 22:20:29 LOG4    send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy
2009-Mar-18 22:20:29 INFO2   fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1
2009-Mar-18 22:20:29 LOG4    send_obs_status: To obs_status: <1> LOOP 1
2009-Mar-18 22:20:29 LOG4    send_obs_status: To obs_status: <1> INFO {Making drift scan}
2009-Mar-18 22:20:29 LOG4    send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...}
2009-Mar-18 22:20:29 LOG4    take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -'
2009-Mar-18 22:20:29 START   begin_task: Starting task 'WAPP spectral observation'
2009-Mar-18 22:20:29 LOG5    begin_task: Level: (3)    ID = <10153>    Status = 0 0 0 0  ok
2009-Mar-18 22:20:29 LOG5    log_alfabeam: Can't log alfabeam, not J2000
2009-Mar-18 22:20:29 INFO2   take_data: Starting WAPP scan: 907700189
2009-Mar-18 22:20:29 LOG4    send_obs_status: To obs_status: <0> TASKTIME 1200
2009-Mar-18 22:20:29 START   begin_task: Starting task 'waiting on WAPP spectra'
2009-Mar-18 22:20:29 LOG5    begin_task: Level: (4)    ID = <10154>    Status = 0 0 0 0  ok
2009-Mar-18 22:20:29 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:20:29 INFO1   WAPP=1+2+3+4-start_spectra: start sec 8430.00
2009-Mar-18 22:20:31 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.165522 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:20:31 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.165522 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:20:31 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.165522 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:20:31 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.165522 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:20:31 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.165522 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:20:31 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.165522 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:20:31 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.165522 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:20:31 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.165522 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:20:31 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.165522 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:20:31 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad)
2009-Mar-18 22:20:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:20:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad)
2009-Mar-18 22:20:37 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.114 (still bad)
2009-Mar-18 22:20:39 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad)
2009-Mar-18 22:20:41 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 22:20:43 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad)
2009-Mar-18 22:20:45 LOG3    WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964  diff = 2)!
2009-Mar-18 22:20:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:20:47 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad)
2009-Mar-18 22:20:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:20:49 LOG4    check_wapp_levels: WAPP-1 power levels:    1.042  0.937    0.916  1.070
2009-Mar-18 22:20:49 LOG4    check_wapp_levels: WAPP-2 power levels:    1.058  1.000    0.907  0.905
2009-Mar-18 22:20:49 LOG4    check_wapp_levels: WAPP-3 power levels:    0.920  0.990    1.113  0.947
2009-Mar-18 22:20:49 LOG4    check_wapp_levels: WAPP-4 power levels:    0.967  0.108    1.067  0.118
2009-Mar-18 22:20:51 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:20:53 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 22:20:55 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad)
2009-Mar-18 22:20:57 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:21:00 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:21:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad)
2009-Mar-18 22:21:04 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:21:06 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad)
2009-Mar-18 22:21:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:21:10 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:21:12 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:21:14 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad)
2009-Mar-18 22:21:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:21:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:21:20 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:21:22 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:21:24 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:21:26 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad)
2009-Mar-18 22:21:28 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:21:30 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:21:32 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:21:34 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:21:36 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:21:38 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.130 (still bad)
2009-Mar-18 22:21:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.131 (still bad)
2009-Mar-18 22:21:42 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.129 (still bad)
2009-Mar-18 22:21:44 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.132 (still bad)
2009-Mar-18 22:21:46 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.129 (still bad)
2009-Mar-18 22:21:48 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:21:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:21:50 LOG4    check_wapp_levels: WAPP-1 power levels:    1.059  0.953    0.917  1.073
2009-Mar-18 22:21:50 LOG4    check_wapp_levels: WAPP-2 power levels:    1.052  0.997    0.908  0.907
2009-Mar-18 22:21:50 LOG4    check_wapp_levels: WAPP-3 power levels:    0.918  0.990    1.125  0.955
2009-Mar-18 22:21:50 LOG4    check_wapp_levels: WAPP-4 power levels:    0.968  0.108    1.069  0.118
2009-Mar-18 22:21:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 22:21:54 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:21:56 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.133 (still bad)
2009-Mar-18 22:21:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.137 (still bad)
2009-Mar-18 22:22:00 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.141 (still bad)
2009-Mar-18 22:22:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.146 (still bad)
2009-Mar-18 22:22:04 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.145 (still bad)
2009-Mar-18 22:22:06 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.141 (still bad)
2009-Mar-18 22:22:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.137 (still bad)
2009-Mar-18 22:22:10 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.135 (still bad)
2009-Mar-18 22:22:12 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:22:14 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:22:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:22:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:22:20 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:22:22 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:22:25 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad)
2009-Mar-18 22:22:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:22:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:22:31 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:22:33 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad)
2009-Mar-18 22:22:35 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad)
2009-Mar-18 22:22:37 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad)
2009-Mar-18 22:22:39 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.114 (still bad)
2009-Mar-18 22:22:41 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad)
2009-Mar-18 22:22:43 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad)
2009-Mar-18 22:22:45 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad)
2009-Mar-18 22:22:47 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:22:49 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:22:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:22:51 LOG4    check_wapp_levels: WAPP-1 power levels:    1.043  0.936    0.916  1.073
2009-Mar-18 22:22:51 LOG4    check_wapp_levels: WAPP-2 power levels:    1.052  0.994    0.907  0.906
2009-Mar-18 22:22:51 LOG4    check_wapp_levels: WAPP-3 power levels:    0.914  0.988    1.121  0.950
2009-Mar-18 22:22:51 LOG4    check_wapp_levels: WAPP-4 power levels:    0.969  0.108    1.071  0.118
2009-Mar-18 22:22:53 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:22:55 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad)
2009-Mar-18 22:22:57 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad)
2009-Mar-18 22:22:59 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:23:01 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad)
2009-Mar-18 22:23:03 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad)
2009-Mar-18 22:23:05 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad)
2009-Mar-18 22:23:07 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad)
2009-Mar-18 22:23:09 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad)
2009-Mar-18 22:23:11 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad)
2009-Mar-18 22:23:13 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad)
2009-Mar-18 22:23:15 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad)
2009-Mar-18 22:23:17 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.114 (still bad)
2009-Mar-18 22:23:19 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad)
2009-Mar-18 22:23:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:23:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:23:25 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad)
2009-Mar-18 22:23:27 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad)
2009-Mar-18 22:23:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad)
2009-Mar-18 22:23:31 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad)
2009-Mar-18 22:23:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:23:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:23:37 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.114 (still bad)
2009-Mar-18 22:23:39 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:23:41 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.115 (still bad)
2009-Mar-18 22:23:43 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:23:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:23:47 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad)
2009-Mar-18 22:23:50 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad)
2009-Mar-18 22:23:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:23:52 LOG4    check_wapp_levels: WAPP-1 power levels:    1.045  0.940    0.919  1.075
2009-Mar-18 22:23:52 LOG4    check_wapp_levels: WAPP-2 power levels:    1.075  1.017    0.910  0.908
2009-Mar-18 22:23:52 LOG4    check_wapp_levels: WAPP-3 power levels:    0.916  0.992    1.118  0.950
2009-Mar-18 22:23:52 LOG4    check_wapp_levels: WAPP-4 power levels:    0.969  0.108    1.071  0.118
2009-Mar-18 22:23:54 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad)
2009-Mar-18 22:23:56 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad)
2009-Mar-18 22:23:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:24:00 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad)
2009-Mar-18 22:24:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:24:04 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:24:06 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad)
2009-Mar-18 22:24:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad)
2009-Mar-18 22:24:10 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:24:12 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:24:14 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad)
2009-Mar-18 22:24:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:24:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad)
2009-Mar-18 22:24:20 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:24:22 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:24:24 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:24:26 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:24:28 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:24:30 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:24:32 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad)
2009-Mar-18 22:24:34 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:24:36 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 22:24:38 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad)
2009-Mar-18 22:24:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.132 (still bad)
2009-Mar-18 22:24:42 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.129 (still bad)
2009-Mar-18 22:24:44 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:24:46 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:24:48 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:24:50 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad)
2009-Mar-18 22:24:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:24:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:24:54 LOG4    check_wapp_levels: WAPP-1 power levels:    1.044  0.939    0.917  1.074
2009-Mar-18 22:24:54 LOG4    check_wapp_levels: WAPP-2 power levels:    1.052  0.992    0.908  0.908
2009-Mar-18 22:24:54 LOG4    check_wapp_levels: WAPP-3 power levels:    0.914  0.988    1.116  0.948
2009-Mar-18 22:24:54 LOG4    check_wapp_levels: WAPP-4 power levels:    0.969  0.108    1.071  0.118
2009-Mar-18 22:24:56 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:24:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:25:00 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad)
2009-Mar-18 22:25:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:25:04 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:25:06 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad)
2009-Mar-18 22:25:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad)
2009-Mar-18 22:25:10 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:25:13 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:25:15 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad)
2009-Mar-18 22:25:17 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:25:19 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad)
2009-Mar-18 22:25:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:25:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:25:25 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:25:27 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad)
2009-Mar-18 22:25:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:25:31 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad)
2009-Mar-18 22:25:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:25:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:25:37 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad)
2009-Mar-18 22:25:39 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad)
2009-Mar-18 22:25:41 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:25:43 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:25:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:25:47 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:25:49 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad)
2009-Mar-18 22:25:51 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad)
2009-Mar-18 22:25:53 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:25:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:25:55 LOG4    check_wapp_levels: WAPP-1 power levels:    1.044  0.941    0.918  1.075
2009-Mar-18 22:25:55 LOG4    check_wapp_levels: WAPP-2 power levels:    1.055  0.998    0.909  0.909
2009-Mar-18 22:25:55 LOG4    check_wapp_levels: WAPP-3 power levels:    0.914  0.986    1.117  0.948
2009-Mar-18 22:25:55 LOG4    check_wapp_levels: WAPP-4 power levels:    0.967  0.108    1.070  0.118
2009-Mar-18 22:25:57 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad)
2009-Mar-18 22:25:59 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:26:01 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad)
2009-Mar-18 22:26:03 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad)
2009-Mar-18 22:26:05 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:26:07 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad)
2009-Mar-18 22:26:09 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:26:11 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:26:13 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:26:15 INFO5   check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad)
2009-Mar-18 22:26:17 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:26:19 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad)
2009-Mar-18 22:26:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:26:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:26:25 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:26:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:26:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:26:31 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:26:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:26:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:26:37 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:26:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:26:42 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:26:44 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:26:46 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:26:48 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:26:50 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:26:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:26:54 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad)
2009-Mar-18 22:26:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:26:56 LOG4    check_wapp_levels: WAPP-1 power levels:    1.044  0.942    0.919  1.076
2009-Mar-18 22:26:56 LOG4    check_wapp_levels: WAPP-2 power levels:    1.055  0.995    0.909  0.909
2009-Mar-18 22:26:56 LOG4    check_wapp_levels: WAPP-3 power levels:    0.914  0.989    1.118  0.949
2009-Mar-18 22:26:56 LOG4    check_wapp_levels: WAPP-4 power levels:    0.971  0.108    1.074  0.118
2009-Mar-18 22:26:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:27:00 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:27:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:27:04 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:27:06 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:27:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:27:10 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:27:12 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:27:14 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:27:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:27:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:27:20 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:27:22 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:27:24 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:27:26 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:27:28 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:27:30 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:27:32 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:27:34 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:27:36 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:27:38 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:27:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:27:42 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:27:44 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:27:46 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:27:48 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:27:50 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:27:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:27:54 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:27:56 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:27:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:27:58 LOG4    check_wapp_levels: WAPP-1 power levels:    1.048  0.944    0.926  1.084
2009-Mar-18 22:27:58 LOG4    check_wapp_levels: WAPP-2 power levels:    1.069  1.008    0.915  0.916
2009-Mar-18 22:27:58 LOG4    check_wapp_levels: WAPP-3 power levels:    0.917  0.995    1.127  0.955
2009-Mar-18 22:27:58 LOG4    check_wapp_levels: WAPP-4 power levels:    0.976  0.108    1.079  0.119
2009-Mar-18 22:28:00 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:28:03 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:28:05 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:28:07 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:28:09 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:28:11 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:28:13 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:28:15 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:28:17 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:28:19 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:28:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:28:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:28:25 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:28:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:28:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:28:31 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:28:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:28:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:28:37 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:28:39 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:28:41 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:28:43 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad)
2009-Mar-18 22:28:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:28:47 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:28:49 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:28:51 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:28:53 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:28:55 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:28:57 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:28:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:28:59 LOG4    check_wapp_levels: WAPP-1 power levels:    1.043  0.941    0.921  1.078
2009-Mar-18 22:28:59 LOG4    check_wapp_levels: WAPP-2 power levels:    1.057  0.997    0.911  0.912
2009-Mar-18 22:28:59 LOG4    check_wapp_levels: WAPP-3 power levels:    0.913  0.991    1.120  0.952
2009-Mar-18 22:28:59 LOG4    check_wapp_levels: WAPP-4 power levels:    0.976  0.108    1.080  0.119
2009-Mar-18 22:29:01 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:29:03 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:29:05 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:29:07 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:29:09 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:29:11 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:29:13 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:29:15 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:29:17 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:29:19 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:29:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:29:24 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:29:26 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:29:28 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:29:30 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:29:32 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:29:34 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:29:36 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:29:38 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:29:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:29:42 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:29:44 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:29:46 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:29:48 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:29:50 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:29:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:29:54 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:29:56 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:29:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:30:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:30:00 LOG4    check_wapp_levels: WAPP-1 power levels:    1.042  0.942    0.922  1.081
2009-Mar-18 22:30:00 LOG4    check_wapp_levels: WAPP-2 power levels:    1.056  0.997    0.910  0.909
2009-Mar-18 22:30:00 LOG4    check_wapp_levels: WAPP-3 power levels:    0.915  0.987    1.120  0.953
2009-Mar-18 22:30:00 LOG4    check_wapp_levels: WAPP-4 power levels:    0.972  0.108    1.075  0.119
2009-Mar-18 22:30:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:30:04 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:30:06 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:30:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:30:10 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:30:12 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:30:14 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:30:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:30:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad)
2009-Mar-18 22:30:20 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:30:22 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:30:24 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:30:26 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:30:28 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:30:30 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad)
2009-Mar-18 22:30:32 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:30:34 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:30:36 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:30:38 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:30:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:30:42 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:30:44 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:30:46 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:30:48 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:30:51 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:30:53 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:30:55 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:30:57 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:30:59 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:31:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:31:01 LOG4    check_wapp_levels: WAPP-1 power levels:    1.043  0.944    0.921  1.081
2009-Mar-18 22:31:01 LOG4    check_wapp_levels: WAPP-2 power levels:    1.059  0.995    0.910  0.909
2009-Mar-18 22:31:01 LOG4    check_wapp_levels: WAPP-3 power levels:    0.915  0.987    1.122  0.954
2009-Mar-18 22:31:01 LOG4    check_wapp_levels: WAPP-4 power levels:    0.973  0.108    1.078  0.119
2009-Mar-18 22:31:03 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:31:05 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:31:07 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:31:09 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:31:11 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 22:31:13 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:31:14 LOG3    WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964  diff = 2)!
2009-Mar-18 22:31:15 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:31:17 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:31:19 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:31:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:31:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.130 (still bad)
2009-Mar-18 22:31:25 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:31:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:31:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:31:31 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:31:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:31:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:31:37 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:31:39 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:31:41 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:31:43 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:31:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:31:47 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:31:49 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:31:51 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:31:53 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:31:55 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:31:57 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:31:59 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:32:01 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:32:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:32:03 LOG4    check_wapp_levels: WAPP-1 power levels:    1.040  0.942    0.920  1.082
2009-Mar-18 22:32:03 LOG4    check_wapp_levels: WAPP-2 power levels:    1.057  0.998    0.916  0.912
2009-Mar-18 22:32:03 LOG4    check_wapp_levels: WAPP-3 power levels:    0.916  0.986    1.122  0.951
2009-Mar-18 22:32:03 LOG4    check_wapp_levels: WAPP-4 power levels:    0.971  0.108    1.076  0.119
2009-Mar-18 22:32:05 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:32:07 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:32:09 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:32:12 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:32:14 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:32:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:32:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 22:32:20 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:32:22 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:32:24 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:32:26 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:32:28 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:32:30 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:32:32 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:32:34 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:32:36 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:32:38 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:32:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:32:42 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:32:44 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:32:46 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:32:48 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:32:50 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:32:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:32:54 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:32:56 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:32:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:33:00 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:33:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:33:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:33:04 LOG4    check_wapp_levels: WAPP-1 power levels:    1.043  0.940    0.923  1.082
2009-Mar-18 22:33:04 LOG4    check_wapp_levels: WAPP-2 power levels:    1.059  0.998    0.918  0.913
2009-Mar-18 22:33:04 LOG4    check_wapp_levels: WAPP-3 power levels:    0.920  0.994    1.124  0.954
2009-Mar-18 22:33:04 LOG4    check_wapp_levels: WAPP-4 power levels:    0.973  0.108    1.077  0.119
2009-Mar-18 22:33:06 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:33:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:33:10 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.133 (still bad)
2009-Mar-18 22:33:12 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:33:14 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:33:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 22:33:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:33:20 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:33:22 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.129 (still bad)
2009-Mar-18 22:33:24 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:33:26 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:33:28 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:33:30 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:33:32 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:33:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.129 (still bad)
2009-Mar-18 22:33:37 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:33:39 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:33:41 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:33:43 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:33:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:33:47 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.129 (still bad)
2009-Mar-18 22:33:49 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:33:51 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:33:53 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:33:55 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:33:57 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:33:59 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:34:01 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:34:03 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:34:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:34:05 LOG4    check_wapp_levels: WAPP-1 power levels:    1.045  0.946    0.923  1.083
2009-Mar-18 22:34:05 LOG4    check_wapp_levels: WAPP-2 power levels:    1.062  0.998    0.917  0.919
2009-Mar-18 22:34:05 LOG4    check_wapp_levels: WAPP-3 power levels:    0.919  0.992    1.126  0.955
2009-Mar-18 22:34:05 LOG4    check_wapp_levels: WAPP-4 power levels:    0.975  0.108    1.079  0.119
2009-Mar-18 22:34:07 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:34:09 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.130 (still bad)
2009-Mar-18 22:34:11 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.134 (still bad)
2009-Mar-18 22:34:13 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.131 (still bad)
2009-Mar-18 22:34:15 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 22:34:17 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.131 (still bad)
2009-Mar-18 22:34:19 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:34:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 22:34:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.131 (still bad)
2009-Mar-18 22:34:25 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:34:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:34:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:34:31 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:34:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.129 (still bad)
2009-Mar-18 22:34:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.131 (still bad)
2009-Mar-18 22:34:37 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:34:39 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:34:41 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 22:34:43 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:34:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:34:47 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 22:34:49 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:34:51 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:34:53 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:34:55 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:34:57 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:34:59 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 22:35:01 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:35:04 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:35:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:35:06 LOG4    check_wapp_levels: WAPP-1 power levels:    1.043  0.942    0.925  1.083
2009-Mar-18 22:35:06 LOG4    check_wapp_levels: WAPP-2 power levels:    1.060  0.998    0.912  0.913
2009-Mar-18 22:35:06 LOG4    check_wapp_levels: WAPP-3 power levels:    0.918  0.990    1.127  0.951
2009-Mar-18 22:35:06 LOG4    check_wapp_levels: WAPP-4 power levels:    0.977  0.108    1.083  0.119
2009-Mar-18 22:35:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:35:10 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:35:12 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:35:14 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:35:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:35:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:35:20 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:35:22 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:35:24 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:35:26 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:35:28 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:35:30 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:35:32 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:35:34 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:35:36 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:35:38 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:35:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:35:42 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:35:44 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:35:46 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:35:48 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:35:50 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:35:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:35:54 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:35:56 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:35:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:36:00 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:36:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:36:04 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:36:06 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:36:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:36:08 LOG4    check_wapp_levels: WAPP-1 power levels:    1.039  0.942    0.932  1.092
2009-Mar-18 22:36:08 LOG4    check_wapp_levels: WAPP-2 power levels:    1.059  0.999    0.911  0.912
2009-Mar-18 22:36:08 LOG4    check_wapp_levels: WAPP-3 power levels:    0.917  0.988    1.120  0.951
2009-Mar-18 22:36:08 LOG4    check_wapp_levels: WAPP-4 power levels:    0.972  0.108    1.075  0.119
2009-Mar-18 22:36:10 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:36:12 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 22:36:14 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:36:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:36:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:36:20 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:36:22 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:36:24 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 22:36:26 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:36:28 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:36:31 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:36:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:36:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 22:36:37 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:36:39 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:36:41 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:36:43 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:36:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:36:47 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 22:36:49 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:36:51 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:36:53 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:36:55 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:36:57 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:36:59 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 22:37:01 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:37:03 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:37:05 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:37:07 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:37:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:37:09 LOG4    check_wapp_levels: WAPP-1 power levels:    1.041  0.942    0.921  1.085
2009-Mar-18 22:37:09 LOG4    check_wapp_levels: WAPP-2 power levels:    1.060  0.999    0.913  0.914
2009-Mar-18 22:37:09 LOG4    check_wapp_levels: WAPP-3 power levels:    0.931  1.008    1.122  0.952
2009-Mar-18 22:37:09 LOG4    check_wapp_levels: WAPP-4 power levels:    0.974  0.108    1.077  0.119
2009-Mar-18 22:37:11 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:37:13 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:37:15 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:37:17 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:37:19 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:37:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 22:37:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.130 (still bad)
2009-Mar-18 22:37:25 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:37:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:37:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:37:31 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:37:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:37:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.129 (still bad)
2009-Mar-18 22:37:37 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:37:39 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:37:41 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.132 (still bad)
2009-Mar-18 22:37:43 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:37:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.129 (still bad)
2009-Mar-18 22:37:47 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.133 (still bad)
2009-Mar-18 22:37:49 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:37:51 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:37:53 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:37:56 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:37:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:38:00 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 22:38:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:38:04 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:38:06 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:38:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 22:38:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:38:10 LOG4    check_wapp_levels: WAPP-1 power levels:    1.046  0.949    0.923  1.086
2009-Mar-18 22:38:10 LOG4    check_wapp_levels: WAPP-2 power levels:    1.060  1.002    0.913  0.914
2009-Mar-18 22:38:10 LOG4    check_wapp_levels: WAPP-3 power levels:    0.920  0.993    1.131  0.959
2009-Mar-18 22:38:10 LOG4    check_wapp_levels: WAPP-4 power levels:    0.973  0.108    1.076  0.119
2009-Mar-18 22:38:12 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.131 (still bad)
2009-Mar-18 22:38:14 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.129 (still bad)
2009-Mar-18 22:38:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 22:38:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:38:20 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:38:22 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.129 (still bad)
2009-Mar-18 22:38:24 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 22:38:26 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.130 (still bad)
2009-Mar-18 22:38:28 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 22:38:30 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:38:32 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.130 (still bad)
2009-Mar-18 22:38:34 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.130 (still bad)
2009-Mar-18 22:38:36 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:38:38 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.129 (still bad)
2009-Mar-18 22:38:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:38:42 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:38:44 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:38:46 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:38:48 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:38:50 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:38:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:38:54 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 22:38:56 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:38:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:39:00 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:39:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:39:04 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:39:06 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:39:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:39:10 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:39:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:39:12 LOG4    check_wapp_levels: WAPP-1 power levels:    1.047  0.943    0.924  1.086
2009-Mar-18 22:39:12 LOG4    check_wapp_levels: WAPP-2 power levels:    1.066  1.007    0.925  0.924
2009-Mar-18 22:39:12 LOG4    check_wapp_levels: WAPP-3 power levels:    0.921  0.994    1.123  0.954
2009-Mar-18 22:39:12 LOG4    check_wapp_levels: WAPP-4 power levels:    0.974  0.108    1.076  0.119
2009-Mar-18 22:39:14 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:39:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:39:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:39:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:39:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:39:25 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:39:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:39:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:39:31 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:39:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:39:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:39:37 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:39:39 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:39:41 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:39:43 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:39:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:39:47 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.130 (still bad)
2009-Mar-18 22:39:49 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.124 (still bad)
2009-Mar-18 22:39:51 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:39:53 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 22:39:55 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:39:57 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:39:59 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 22:40:01 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:40:03 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:40:05 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 22:40:07 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 22:40:09 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:40:11 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.133 (still bad)
2009-Mar-18 22:40:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:40:13 LOG4    check_wapp_levels: WAPP-1 power levels:    1.042  0.946    0.922  1.085
2009-Mar-18 22:40:13 LOG4    check_wapp_levels: WAPP-2 power levels:    1.060  1.002    0.912  0.913
2009-Mar-18 22:40:13 LOG4    check_wapp_levels: WAPP-3 power levels:    0.931  1.007    1.131  0.959
2009-Mar-18 22:40:13 LOG4    check_wapp_levels: WAPP-4 power levels:    0.978  0.108    1.079  0.119
2009-Mar-18 22:40:15 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.131 (still bad)
2009-Mar-18 22:40:17 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.134 (still bad)
2009-Mar-18 22:40:19 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.132 (still bad)
2009-Mar-18 22:40:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.136 (still bad)
2009-Mar-18 22:40:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.139 (still bad)
2009-Mar-18 22:40:25 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.133 (still bad)
2009-Mar-18 22:40:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.129 (still bad)
2009-Mar-18 22:40:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.130 (still bad)
2009-Mar-18 22:40:30 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:40:30 STOP    end_task: Finishing task 'waiting on WAPP spectra' with status 'OK'
2009-Mar-18 22:40:30 LOG5    end_task: Level: (4)    ID = <10154>    Status = 0 0 0 0  ok
2009-Mar-18 22:40:30 STOP    end_task: Finishing task 'WAPP spectral observation' with status 'OK'
2009-Mar-18 22:40:30 LOG5    end_task: Level: (3)    ID = <10153>    Status = 0 0 0 0  ok
2009-Mar-18 22:40:30 STOP    finish_task: Finishing task 'fixed azimuth drift map'
2009-Mar-18 22:40:30 LOG5    finish_task: Level: (2)    ID = <10120>    Status = 0 0 0 0  ok
2009-Mar-18 22:40:30 DONE    finish_task: DONE finished pattern: fixed azimuth drift map
2009-Mar-18 22:40:30 LOG4    send_obs_status: To obs_status: <1> ENDTASK Finished
2009-Mar-18 22:40:30 END     end_task: Finishing task 'fixed azimuth drift map' with status 'OK'
2009-Mar-18 22:40:30 LOG5    end_task: Level: (2)    ID = <10120>    Status = 0 0 0 0  ok
2009-Mar-18 22:40:30 COMMAND run_command_line: EXECUTING command 12: 'ENDIF'
2009-Mar-18 22:40:30 COMMAND run_command_line: EXECUTING command 15: 'IF LSTSLEW(AGES3193_p2_034) < 100632 THEN'
2009-Mar-18 22:40:31 INFO5   is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_034) < 100632
2009-Mar-18 22:40:31 INFO5   is_if_valid: Condition parsed as: 10.04529 < 10.108888888888888
2009-Mar-18 22:40:31 COMMAND run_command_line: EXECUTING command 16: 'FIXEDDRIFT az=147.43 alfaangle=48.9  epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_034 ra=95300.00 dec=230330.00'
2009-Mar-18 22:40:31 LOG2    check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map'
2009-Mar-18 22:40:31 LOG4    exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok
2009-Mar-18 22:40:31 LOG1    fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 147.43 48.9 hcorcal 5 tracking no first 1 AGES3193_p2_034 95300.00 230330.00 J 8500.0 Heliocentric velocity(optical)'
2009-Mar-18 22:40:31 BEGIN   begin_task: Starting task 'fixed azimuth drift map'
2009-Mar-18 22:40:31 LOG5    begin_task: Level: (2)    ID = <10155>    Status = 0 0 0 0  ok
2009-Mar-18 22:40:31 INFO4   begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_032'
2009-Mar-18 22:40:31 INFO1   fixed_driftmap: Starting pattern: Fixed azimuth drift map
2009-Mar-18 22:40:31 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1    INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_034}
2009-Mar-18 22:40:31 INFO3   fixed_driftmap: Sending telescope to Az = 147.43 and ZA = 5.56
2009-Mar-18 22:40:31 LOG3    track_source: Calling 'track_source AGES3193_p2_034 147.43 5.5632217933 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)'
2009-Mar-18 22:40:31 START   begin_task: Starting task 'sending tracking commands'
2009-Mar-18 22:40:31 LOG5    begin_task: Level: (3)    ID = <10156>    Status = 0 0 0 0  ok
2009-Mar-18 22:40:31 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_034}    INFO {Slewing to source 'AGES3193_p2_034' ...}
2009-Mar-18 22:40:31 INFO1   track_source: Starting to track AGES3193_p2_034
2009-Mar-18 22:40:31 LOG3    vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_034"
2009-Mar-18 22:40:31 LOG3    vw_send: To DATATAKING: set ra 147.43
2009-Mar-18 22:40:31 LOG3    vw_send: To DATATAKING: set dec 5.5632217933
2009-Mar-18 22:40:31 LOG3    vw_send: To DATATAKING: pnt tr send
2009-Mar-18 22:40:31 LOG3    vw_send: To DATATAKING: pnt tr 147.43 5.5632217933 -CF
2009-Mar-18 22:40:31 LOG3    vw_send: To DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 22:40:31 STOP    finish_task: Finishing task 'sending tracking commands'
2009-Mar-18 22:40:31 LOG5    finish_task: Level: (3)    ID = <10156>    Status = 0 0 0 0  ok
2009-Mar-18 22:40:31 INFO2   finish_task: DONE finished sending: tracking commands
2009-Mar-18 22:40:31 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:40:31 STOP    end_task: Finishing task 'sending tracking commands' with status 'OK'
2009-Mar-18 22:40:31 LOG5    end_task: Level: (3)    ID = <10156>    Status = 0 0 0 0  ok
2009-Mar-18 22:40:31 START   begin_task: Starting task 'rotate ALFA to +48.9 degrees'
2009-Mar-18 22:40:31 LOG5    begin_task: Level: (3)    ID = <10157>    Status = 0 0 0 0  ok
2009-Mar-18 22:40:31 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA}    INFO {Rotating ALFA to +48.9 degrees ...}
2009-Mar-18 22:40:31 INFO2   rotate_alfa: ALFA commanded to +48.9 degrees
2009-Mar-18 22:40:31 LOG3    sock_errsend: To ALFAMOTOR: POSITION 48.9 REPLY
2009-Mar-18 22:40:31 LOG4    send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...}
2009-Mar-18 22:40:31 START   begin_task: Starting task 'waiting on ALFA rotation'
2009-Mar-18 22:40:31 LOG5    begin_task: Level: (4)    ID = <10158>    Status = 0 0 0 0  ok
2009-Mar-18 22:40:31 LOG4    got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_034"
2009-Mar-18 22:40:31 LOG4    got_cormsg: From DATATAKING: set ra 147.43
2009-Mar-18 22:40:31 LOG4    got_cormsg: From DATATAKING: set dec 5.5632217933
2009-Mar-18 22:40:31 LOG4    got_cormsg: From DATATAKING: vw% 147.43
2009-Mar-18 22:40:31 LOG4    got_cormsg: From DATATAKING: vw% 5.5632217933
2009-Mar-18 22:40:31 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:40:31 LOG4    got_cormsg: From DATATAKING: pnt tr send
2009-Mar-18 22:40:31 LOG4    got_cormsg: From DATATAKING: pnt tr 147.43 5.5632217933 -CF
2009-Mar-18 22:40:31 LOG4    got_cormsg: From DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 22:40:31 LOG4    got_cormsg: From DATATAKING: vw% vw%
2009-Mar-18 22:40:31 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:40:32 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:41:05 LOG4    exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION"
2009-Mar-18 22:41:05 INFO3   alfa_motor: ALFA rotator in-position +48.90 degrees
2009-Mar-18 22:41:05 STOP    end_task: Finishing task 'waiting on ALFA rotation' with status 'OK'
2009-Mar-18 22:41:05 LOG5    end_task: Level: (4)    ID = <10158>    Status = 0 0 0 0  ok
2009-Mar-18 22:41:05 LOG4    send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy
2009-Mar-18 22:41:05 STOP    finish_task: Finishing task 'rotate ALFA to +48.9 degrees'
2009-Mar-18 22:41:05 LOG5    finish_task: Level: (3)    ID = <10157>    Status = 0 0 0 0  ok
2009-Mar-18 22:41:05 INFO2   finish_task: DONE finished configuration: rotating ALFA to +48.9 degrees
2009-Mar-18 22:41:05 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:41:05 STOP    end_task: Finishing task 'rotate ALFA to +48.9 degrees' with status 'OK'
2009-Mar-18 22:41:05 LOG5    end_task: Level: (3)    ID = <10157>    Status = 0 0 0 0  ok
2009-Mar-18 22:41:05 START   begin_task: Starting task 'waiting on telescope'
2009-Mar-18 22:41:05 LOG5    begin_task: Level: (3)    ID = <10159>    Status = 0 0 0 0  ok
2009-Mar-18 22:41:05 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew    INFO {Waiting for telescope to track source ...}
2009-Mar-18 22:41:05 LOG3    waittrk: Start waittrk 5
2009-Mar-18 22:41:05 START   begin_task: Starting task 'waiting on telescope movement'
2009-Mar-18 22:41:05 LOG5    begin_task: Level: (4)    ID = <10160>    Status = 0 0 0 0  ok
2009-Mar-18 22:41:10 STOP    end_task: Finishing task 'waiting on telescope movement' with status 'OK'
2009-Mar-18 22:41:10 LOG5    end_task: Level: (4)    ID = <10160>    Status = 0 0 0 0  ok
2009-Mar-18 22:41:10 START   begin_task: Starting task 'waiting on telescope on source'
2009-Mar-18 22:41:10 LOG5    begin_task: Level: (4)    ID = <10161>    Status = 0 0 0 0  ok
2009-Mar-18 22:43:18 STOP    end_task: Finishing task 'waiting on telescope on source' with status 'OK'
2009-Mar-18 22:43:18 LOG5    end_task: Level: (4)    ID = <10161>    Status = 0 0 0 0  ok
2009-Mar-18 22:43:19 LOG4    send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy
2009-Mar-18 22:43:19 INFO2   waittrk: Now tracking AGES3193_p2_034
2009-Mar-18 22:43:19 LOG4    waittrk: Current telescope position:  Az = 147.20  ZA = 5.58
2009-Mar-18 22:43:19 STOP    finish_task: Finishing task 'waiting on telescope'
2009-Mar-18 22:43:19 LOG5    finish_task: Level: (3)    ID = <10159>    Status = 0 0 0 0  ok
2009-Mar-18 22:43:19 INFO2   finish_task: DONE finished waiting: telescope on source
2009-Mar-18 22:43:19 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:43:19 STOP    end_task: Finishing task 'waiting on telescope' with status 'OK'
2009-Mar-18 22:43:19 LOG5    end_task: Level: (3)    ID = <10159>    Status = 0 0 0 0  ok
2009-Mar-18 22:43:19 START   begin_task: Starting task 'selecting calibration type'
2009-Mar-18 22:43:19 LOG5    begin_task: Level: (3)    ID = <10162>    Status = 0 0 0 0  ok
2009-Mar-18 22:43:19 LOG3    vw_send: To DATATAKING: setcal hcorcal
2009-Mar-18 22:43:19 LOG2    socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE'
2009-Mar-18 22:43:19 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:43:19 START   begin_task: Starting task 'waiting on setcal'
2009-Mar-18 22:43:19 LOG5    begin_task: Level: (4)    ID = <10163>    Status = 0 0 0 0  ok
2009-Mar-18 22:43:19 LOG4    got_cormsg: From DATATAKING: setcal hcorcal
2009-Mar-18 22:43:19 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:43:20 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:43:20 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-18 22:43:20 STOP    end_task: Finishing task 'waiting on setcal' with status 'OK'
2009-Mar-18 22:43:20 LOG5    end_task: Level: (4)    ID = <10163>    Status = 0 0 0 0  ok
2009-Mar-18 22:43:20 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'setcal'
2009-Mar-18 22:43:20 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-18 22:43:20 LOG3    socket_wait: To ALFAMON: CAL HI
2009-Mar-18 22:43:20 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-18 22:43:20 LOG5    begin_task: Level: (4)    ID = <10164>    Status = 0 0 0 0  ok
2009-Mar-18 22:43:20 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:43:20 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-18 22:43:20 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-18 22:43:20 LOG5    end_task: Level: (4)    ID = <10164>    Status = 0 0 0 0  ok
2009-Mar-18 22:43:20 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-18 22:43:20 LOG3    to_alfamon: To ALFAMON: CAL HI
2009-Mar-18 22:43:20 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-18 22:43:20 LOG3    socket_wait: To ALFAMON: NOISE ACTIVE
2009-Mar-18 22:43:20 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-18 22:43:20 LOG5    begin_task: Level: (4)    ID = <10165>    Status = 0 0 0 0  ok
2009-Mar-18 22:43:20 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-18 22:43:20 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-18 22:43:20 LOG5    end_task: Level: (4)    ID = <10165>    Status = 0 0 0 0  ok
2009-Mar-18 22:43:20 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-18 22:43:20 LOG3    to_alfamon: To ALFAMON: NOISE ACTIVE
2009-Mar-18 22:43:20 STOP    end_task: Finishing task 'selecting calibration type' with status 'OK'
2009-Mar-18 22:43:20 LOG5    end_task: Level: (3)    ID = <10162>    Status = 0 0 0 0  ok
2009-Mar-18 22:43:20 LOG4    send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time}
2009-Mar-18 22:43:20 INFO2   astwait: Waiting for 125 seconds from 02:43:20 to 02:45:25 UTC ...
2009-Mar-18 22:43:20 LOG4    send_obs_status: To obs_status: <1> TASKTIME 125 BITMAP stat_wait MESSAGE {Waiting ...}
2009-Mar-18 22:43:20 START   begin_task: Starting task 'waiting on waiting for AST time'
2009-Mar-18 22:43:20 LOG5    begin_task: Level: (3)    ID = <10166>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:25 STOP    end_task: Finishing task 'waiting on waiting for AST time' with status 'OK'
2009-Mar-18 22:45:25 LOG5    end_task: Level: (3)    ID = <10166>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:25 INFO3   astwait: Finished waiting
2009-Mar-18 22:45:25 LOG4    send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy
2009-Mar-18 22:45:25 LOG5    dopset_later: Calling 'dopset_later 61.429484838773782'
2009-Mar-18 22:45:25 INFO3   dopset_later: Setting Doppler correction for 22:46:25 (61.4 seconds from now)
2009-Mar-18 22:45:25 LOG5    antvel: Calling 'antvel 147.430000 5.563222 F 61.429484838773782'
2009-Mar-18 22:45:25 LOG2    antvel: Transforming current Az = 147.43  ZA = 5.56 to apparent RA = 09:53:33.2  Dec = +23:00:47.4
2009-Mar-18 22:45:25 LOG2    antvel: Parameters to Doppler: Heliocentric 96385 2009 77 0.0
2009-Mar-18 22:45:25 INFO5   antvel: Computed antenna velocity: +16.95869 km/s
2009-Mar-18 22:45:25 LOG3    dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=16.958692856500001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786
2009-Mar-18 22:45:25 INFO4   dopset_gen: New sky frequencies: 1381.165299 1381.165299 1381.165299 1381.165299 1381.165299 1381.165299 1381.165299 1381.165299 1381.165299
2009-Mar-18 22:45:25 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1381.165299 sky0=1381.165299 sky1=1381.165299 sky2=1381.165299 sky3=1381.165299 sky4=1381.165299 sky5=1381.165299 sky6=1381.165299 sky7=1381.165299 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 22:45:25 LOG2    dopset_gen: Result from 'sky2syn': 1631.165299 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 22:45:25 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1631165299.0}
2009-Mar-18 22:45:25 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:45:25 LOG4    send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation}
2009-Mar-18 22:45:25 INFO3   fixed_driftmap: Switching to tracking mode for calibration
2009-Mar-18 22:45:25 INFO5   fixed_driftmap: Tracking J2000 position:  RA = 09:52:03.6  Dec = +23:03:24.2
2009-Mar-18 22:45:25 LOG3    track_source: Calling 'track_source AGES3193_p2_034 095203.6 230324.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)'
2009-Mar-18 22:45:25 START   begin_task: Starting task 'sending tracking commands'
2009-Mar-18 22:45:25 LOG5    begin_task: Level: (3)    ID = <10167>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:25 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_034}    INFO {Slewing to source 'AGES3193_p2_034' ...}
2009-Mar-18 22:45:25 INFO1   track_source: Starting to track AGES3193_p2_034
2009-Mar-18 22:45:25 LOG3    vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_034"
2009-Mar-18 22:45:25 LOG3    vw_send: To DATATAKING: set ra 095203.6
2009-Mar-18 22:45:25 LOG3    vw_send: To DATATAKING: set dec 230324.2
2009-Mar-18 22:45:25 LOG3    vw_send: To DATATAKING: pnt tr send
2009-Mar-18 22:45:25 LOG3    vw_send: To DATATAKING: pnt tr 095203.6 230324.2 -CJ
2009-Mar-18 22:45:25 LOG3    vw_send: To DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 22:45:25 STOP    finish_task: Finishing task 'sending tracking commands'
2009-Mar-18 22:45:25 LOG5    finish_task: Level: (3)    ID = <10167>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:25 INFO2   finish_task: DONE finished sending: tracking commands
2009-Mar-18 22:45:25 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:45:25 STOP    end_task: Finishing task 'sending tracking commands' with status 'OK'
2009-Mar-18 22:45:25 LOG5    end_task: Level: (3)    ID = <10167>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:25 START   begin_task: Starting task 'waiting on telescope'
2009-Mar-18 22:45:25 LOG5    begin_task: Level: (3)    ID = <10168>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:25 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew    INFO {Waiting for telescope to track source ...}
2009-Mar-18 22:45:25 LOG3    waittrk: Start waittrk 5
2009-Mar-18 22:45:25 START   begin_task: Starting task 'waiting on telescope movement'
2009-Mar-18 22:45:25 LOG5    begin_task: Level: (4)    ID = <10169>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:25 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1631165299.0}
2009-Mar-18 22:45:25 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 22:45:25 LOG4    got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_034"
2009-Mar-18 22:45:25 LOG4    got_cormsg: From DATATAKING: set ra 095203.6
2009-Mar-18 22:45:25 LOG4    got_cormsg: From DATATAKING: set dec 230324.2
2009-Mar-18 22:45:25 LOG4    got_cormsg: From DATATAKING: vw% vw%
2009-Mar-18 22:45:25 LOG4    got_cormsg: From DATATAKING: vw% 095203.6
2009-Mar-18 22:45:25 LOG4    got_cormsg: From DATATAKING: vw% 230324.2
2009-Mar-18 22:45:25 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:45:25 LOG4    got_cormsg: From DATATAKING: pnt tr send
2009-Mar-18 22:45:25 LOG4    got_cormsg: From DATATAKING: pnt tr 095203.6 230324.2 -CJ
2009-Mar-18 22:45:25 LOG4    got_cormsg: From DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 22:45:25 LOG4    got_cormsg: From DATATAKING: vw% vw% vw%
2009-Mar-18 22:45:30 STOP    end_task: Finishing task 'waiting on telescope movement' with status 'OK'
2009-Mar-18 22:45:30 LOG5    end_task: Level: (4)    ID = <10169>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:30 START   begin_task: Starting task 'waiting on telescope on source'
2009-Mar-18 22:45:30 LOG5    begin_task: Level: (4)    ID = <10170>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:32 STOP    end_task: Finishing task 'waiting on telescope on source' with status 'OK'
2009-Mar-18 22:45:32 LOG5    end_task: Level: (4)    ID = <10170>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:32 LOG4    send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy
2009-Mar-18 22:45:32 INFO2   waittrk: Now tracking AGES3193_p2_034
2009-Mar-18 22:45:32 LOG4    waittrk: Current telescope position:  Az = 147.07  ZA = 5.58
2009-Mar-18 22:45:32 STOP    finish_task: Finishing task 'waiting on telescope'
2009-Mar-18 22:45:32 LOG5    finish_task: Level: (3)    ID = <10168>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:32 INFO2   finish_task: DONE finished waiting: telescope on source
2009-Mar-18 22:45:32 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:45:32 STOP    end_task: Finishing task 'waiting on telescope' with status 'OK'
2009-Mar-18 22:45:32 LOG5    end_task: Level: (3)    ID = <10168>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:32 START   begin_task: Starting task 'adjusting WAPP power'
2009-Mar-18 22:45:32 LOG5    begin_task: Level: (3)    ID = <10171>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:32 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT    BITMAP stat_power INFO {Adjusting WAPP power ...}
2009-Mar-18 22:45:32 INFO2   adjust_power: Starting to adjust WAPP power
2009-Mar-18 22:45:32 LOG3    vw_send: To DATATAKING: adjpwrif2 
2009-Mar-18 22:45:32 LOG2    socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE'
2009-Mar-18 22:45:32 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:45:32 START   begin_task: Starting task 'waiting on adjpwrif2'
2009-Mar-18 22:45:32 LOG5    begin_task: Level: (4)    ID = <10172>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:32 LOG4    got_cormsg: From DATATAKING: adjpwrif2
2009-Mar-18 22:45:32 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:45:35 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:45:35 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-18 22:45:35 STOP    end_task: Finishing task 'waiting on adjpwrif2' with status 'OK'
2009-Mar-18 22:45:35 LOG5    end_task: Level: (4)    ID = <10172>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:35 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2'
2009-Mar-18 22:45:35 START   begin_task: Starting task 'adjusting WAPP power'
2009-Mar-18 22:45:35 LOG5    begin_task: Level: (4)    ID = <10173>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:35 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT    BITMAP stat_power INFO {Adjusting power ...}
2009-Mar-18 22:45:35 LOG3    sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-18 22:45:35 LOG3    sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-18 22:45:35 LOG3    sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-18 22:45:35 LOG3    sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-18 22:45:35 START   begin_task: Starting task 'waiting on adjust WAPP power'
2009-Mar-18 22:45:35 LOG5    begin_task: Level: (5)    ID = <10174>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:36 LOG4    WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1'
2009-Mar-18 22:45:36 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:45:36 INFO2   WAPP=1-auto_atten_dual: Attenuators beam 0:  7  6 dB  ---  beam 1:  7  6 dB
2009-Mar-18 22:45:36 INFO2   WAPP=3-auto_atten_dual: Attenuators beam 4:  3  1 dB  ---  beam 5:  5  4 dB
2009-Mar-18 22:45:36 INFO2   WAPP=2-auto_atten_dual: Attenuators beam 2:  6  4 dB  ---  beam 3:  4  3 dB
2009-Mar-18 22:45:36 INFO2   WAPP=4-auto_atten_dual: Attenuators beam 6:  3  0 dB  ---  beam 7:  2  0 dB
2009-Mar-18 22:45:36 INFO1   WAPP=1+2+3+4-adjust_power: DONE adjusting power
2009-Mar-18 22:45:36 STOP    end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK'
2009-Mar-18 22:45:36 LOG5    end_task: Level: (5)    ID = <10174>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:36 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 0:  1.022  0.957    ALFA beam 1:  0.915  1.105
2009-Mar-18 22:45:36 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 2:  1.076  1.015    ALFA beam 3:  0.914  0.913
2009-Mar-18 22:45:36 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 4:  0.930  1.014    ALFA beam 5:  1.101  0.975
2009-Mar-18 22:45:36 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 6:  0.942  0.108    ALFA beam 7:  1.042  0.119
2009-Mar-18 22:45:36 STOP    finish_task: Finishing task 'adjusting WAPP power'
2009-Mar-18 22:45:36 LOG5    finish_task: Level: (4)    ID = <10173>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:36 INFO3   finish_task: DONE finished adjusting: WAPP power
2009-Mar-18 22:45:36 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:45:36 STOP    end_task: Finishing task 'adjusting WAPP power' with status 'OK'
2009-Mar-18 22:45:36 LOG5    end_task: Level: (4)    ID = <10173>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:36 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_busy
2009-Mar-18 22:45:36 STOP    finish_task: Finishing task 'adjusting WAPP power'
2009-Mar-18 22:45:36 LOG5    finish_task: Level: (3)    ID = <10171>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:36 INFO2   finish_task: DONE finished adjusting: WAPP power levels
2009-Mar-18 22:45:36 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:45:36 STOP    end_task: Finishing task 'adjusting WAPP power' with status 'OK'
2009-Mar-18 22:45:36 LOG5    end_task: Level: (3)    ID = <10171>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:36 LOG3    send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin
2009-Mar-18 22:45:36 LOG3    send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin
2009-Mar-18 22:45:36 LOG3    send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin
2009-Mar-18 22:45:36 LOG3    send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin
2009-Mar-18 22:45:36 LOG2    take_cal: Calling 'take_cal hcorcal 5 0'
2009-Mar-18 22:45:36 START   begin_task: Starting task 'WAPP calibration'
2009-Mar-18 22:45:36 LOG5    begin_task: Level: (3)    ID = <10175>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:36 LOG4    send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration}    INFO {Making WAPP calibration ...}
2009-Mar-18 22:45:36 START   begin_task: Starting task 'selecting calibration type'
2009-Mar-18 22:45:36 LOG5    begin_task: Level: (4)    ID = <10176>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:36 LOG3    vw_send: To DATATAKING: setcal hcorcal
2009-Mar-18 22:45:36 LOG2    socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE'
2009-Mar-18 22:45:36 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:45:36 START   begin_task: Starting task 'waiting on setcal'
2009-Mar-18 22:45:36 LOG5    begin_task: Level: (5)    ID = <10177>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:36 LOG4    WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin'
2009-Mar-18 22:45:36 LOG4    got_cormsg: From DATATAKING: setcal hcorcal
2009-Mar-18 22:45:36 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 22:45:37 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:45:37 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-18 22:45:37 STOP    end_task: Finishing task 'waiting on setcal' with status 'OK'
2009-Mar-18 22:45:37 LOG5    end_task: Level: (5)    ID = <10177>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:37 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'setcal'
2009-Mar-18 22:45:37 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-18 22:45:37 LOG3    socket_wait: To ALFAMON: CAL HI
2009-Mar-18 22:45:37 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-18 22:45:37 LOG5    begin_task: Level: (5)    ID = <10178>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:37 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:45:37 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-18 22:45:37 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-18 22:45:37 LOG5    end_task: Level: (5)    ID = <10178>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:37 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-18 22:45:37 LOG3    to_alfamon: To ALFAMON: CAL HI
2009-Mar-18 22:45:37 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-18 22:45:37 LOG3    socket_wait: To ALFAMON: NOISE ACTIVE
2009-Mar-18 22:45:37 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-18 22:45:37 LOG5    begin_task: Level: (5)    ID = <10179>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:37 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-18 22:45:37 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-18 22:45:37 LOG5    end_task: Level: (5)    ID = <10179>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:37 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-18 22:45:37 LOG3    to_alfamon: To ALFAMON: NOISE ACTIVE
2009-Mar-18 22:45:37 STOP    end_task: Finishing task 'selecting calibration type' with status 'OK'
2009-Mar-18 22:45:37 LOG5    end_task: Level: (4)    ID = <10176>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:37 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...}
2009-Mar-18 22:45:37 LOG3    wapp_calcontrol: To CALCONTROL: CALON
2009-Mar-18 22:45:37 LOG3    sock_errsend: To CALCONTROL: CALON STATUS
2009-Mar-18 22:45:37 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-18 22:45:37 LOG5    begin_task: Level: (4)    ID = <10180>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:37 NOTE    WAPPDATA-new_file: New FITS file: wapp.20090318.a2048.0002.fits
2009-Mar-18 22:45:37 LOG4    send_obs_status: To obs_status: <0> FILENAME {wapp.20090318.a2048.0002.fits}
2009-Mar-18 22:45:37 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-18 22:45:37 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x03
2009-Mar-18 22:45:37 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-18 22:45:37 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-18 22:45:37 LOG5    end_task: Level: (4)    ID = <10180>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:37 LOG4    send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...}
2009-Mar-18 22:45:37 LOG4    take_data: Calling 'take_data 5 5 CAL ON -'
2009-Mar-18 22:45:37 START   begin_task: Starting task 'WAPP spectral observation'
2009-Mar-18 22:45:37 LOG5    begin_task: Level: (4)    ID = <10181>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:37 LOG5    log_alfabeam: Parameters: 9.8676666666666684 23.056722222222227 10.095802 2009.2134109374604 48.899937
2009-Mar-18 22:45:37 LOG4    log_alfabeam: ALFABEAM 0   9.867666666666681  23.056722222222234
2009-Mar-18 22:45:37 LOG4    log_alfabeam: ALFABEAM 1   9.870022271060778  22.956785687965834
2009-Mar-18 22:45:37 LOG4    log_alfabeam: ALFABEAM 2   9.874496033907311  23.023059736358601
2009-Mar-18 22:45:37 LOG4    log_alfabeam: ALFABEAM 3   9.872265466382988  23.123578109933316
2009-Mar-18 22:45:37 LOG4    log_alfabeam: ALFABEAM 4   9.865377959985350  23.157119453076458
2009-Mar-18 22:45:37 LOG4    log_alfabeam: ALFABEAM 5   9.860756666833675  23.088817767464196
2009-Mar-18 22:45:37 LOG4    log_alfabeam: ALFABEAM 6   9.863170186644712  22.989016485588202
2009-Mar-18 22:45:37 INFO2   take_data: Starting WAPP scan: 907700190
2009-Mar-18 22:45:38 LOG4    send_obs_status: To obs_status: <0> TASKTIME 5
2009-Mar-18 22:45:38 START   begin_task: Starting task 'waiting on WAPP spectra'
2009-Mar-18 22:45:38 LOG5    begin_task: Level: (5)    ID = <10182>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:38 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:45:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:45:38 LOG4    check_wapp_levels: WAPP-1 power levels:    1.022  0.957    0.915  1.105
2009-Mar-18 22:45:38 LOG4    check_wapp_levels: WAPP-2 power levels:    1.076  1.015    0.914  0.913
2009-Mar-18 22:45:38 LOG4    check_wapp_levels: WAPP-3 power levels:    0.930  1.014    1.101  0.975
2009-Mar-18 22:45:38 LOG4    check_wapp_levels: WAPP-4 power levels:    0.942  0.108    1.042  0.119
2009-Mar-18 22:45:38 INFO1   WAPP=1+2+3+4-start_spectra: start sec 9939.00
2009-Mar-18 22:45:44 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.165299 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:45:44 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.165299 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:45:44 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.165299 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:45:44 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.165299 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:45:44 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.508 (still bad)
2009-Mar-18 22:45:44 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.165299 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:45:44 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.165299 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:45:44 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.165299 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:45:44 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.165299 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:45:44 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.165299 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:45:44 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:45:44 STOP    end_task: Finishing task 'waiting on WAPP spectra' with status 'OK'
2009-Mar-18 22:45:44 LOG5    end_task: Level: (5)    ID = <10182>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:44 STOP    end_task: Finishing task 'WAPP spectral observation' with status 'OK'
2009-Mar-18 22:45:44 LOG5    end_task: Level: (4)    ID = <10181>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:44 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...}
2009-Mar-18 22:45:44 LOG3    wapp_calcontrol: To CALCONTROL: CALOFF
2009-Mar-18 22:45:44 LOG3    sock_errsend: To CALCONTROL: CALOFF STATUS
2009-Mar-18 22:45:44 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-18 22:45:44 LOG5    begin_task: Level: (4)    ID = <10183>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:45 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-18 22:45:45 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x02
2009-Mar-18 22:45:45 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-18 22:45:45 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-18 22:45:45 LOG5    end_task: Level: (4)    ID = <10183>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:45 LOG4    send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...}
2009-Mar-18 22:45:45 LOG4    take_data: Calling 'take_data 5 5 CAL OFF -'
2009-Mar-18 22:45:45 START   begin_task: Starting task 'WAPP spectral observation'
2009-Mar-18 22:45:45 LOG5    begin_task: Level: (4)    ID = <10184>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:45 LOG5    log_alfabeam: Parameters: 9.8676666666666684 23.056722222222227 10.097751 2009.213411159277 48.899937
2009-Mar-18 22:45:45 LOG4    log_alfabeam: ALFABEAM 0   9.867666666666686  23.056722222222234
2009-Mar-18 22:45:45 LOG4    log_alfabeam: ALFABEAM 1   9.870052308380780  22.956921388299222
2009-Mar-18 22:45:45 LOG4    log_alfabeam: ALFABEAM 2   9.874506251651679  23.023454841801726
2009-Mar-18 22:45:45 LOG4    log_alfabeam: ALFABEAM 3   9.872245102488757  23.123843158219653
2009-Mar-18 22:45:45 LOG4    log_alfabeam: ALFABEAM 4   9.865347549606009  23.156986311697839
2009-Mar-18 22:45:45 LOG4    log_alfabeam: ALFABEAM 5   9.860747147010860  23.088422126326861
2009-Mar-18 22:45:45 LOG4    log_alfabeam: ALFABEAM 6   9.863190528357412  22.988759543369834
2009-Mar-18 22:45:45 INFO2   take_data: Starting WAPP scan: 907700191
2009-Mar-18 22:45:45 LOG4    send_obs_status: To obs_status: <0> TASKTIME 5
2009-Mar-18 22:45:45 START   begin_task: Starting task 'waiting on WAPP spectra'
2009-Mar-18 22:45:45 LOG5    begin_task: Level: (5)    ID = <10185>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:45 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:45:45 INFO1   WAPP=1+2+3+4-start_spectra: start sec 9946.00
2009-Mar-18 22:45:50 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.553 (still bad)
2009-Mar-18 22:45:51 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.165299 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:45:51 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.165299 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:45:51 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.165299 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:45:51 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.165299 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:45:51 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.165299 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:45:51 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.165299 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:45:51 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.165299 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:45:51 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.165299 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:45:51 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.165299 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:45:51 INFO1   WAPP=1+2+3+4-start_spectra: Skipping Tsys
2009-Mar-18 22:45:51 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 22:45:51 STOP    end_task: Finishing task 'waiting on WAPP spectra' with status 'OK'
2009-Mar-18 22:45:51 LOG5    end_task: Level: (5)    ID = <10185>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:51 STOP    end_task: Finishing task 'WAPP spectral observation' with status 'OK'
2009-Mar-18 22:45:51 LOG5    end_task: Level: (4)    ID = <10184>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:51 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_busy
2009-Mar-18 22:45:51 STOP    finish_task: Finishing task 'WAPP calibration'
2009-Mar-18 22:45:51 LOG5    finish_task: Level: (3)    ID = <10175>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:51 INFO2   finish_task: DONE finished calibration: WAPP calibration
2009-Mar-18 22:45:51 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:45:51 STOP    end_task: Finishing task 'WAPP calibration' with status 'OK'
2009-Mar-18 22:45:51 LOG5    end_task: Level: (3)    ID = <10175>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:52 LOG4    send_obs_status: To obs_status: <1> INFO {Returning to drift position}
2009-Mar-18 22:45:52 INFO4   fixed_driftmap: Sending telescope back to drift position Az = 147.43 and ZA = 5.56
2009-Mar-18 22:45:52 LOG3    track_source: Calling 'track_source AGES3193_p2_034 147.43 5.5632217933 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)'
2009-Mar-18 22:45:52 START   begin_task: Starting task 'sending tracking commands'
2009-Mar-18 22:45:52 LOG5    begin_task: Level: (3)    ID = <10186>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:52 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_034}    INFO {Slewing to source 'AGES3193_p2_034' ...}
2009-Mar-18 22:45:52 INFO1   track_source: Starting to track AGES3193_p2_034
2009-Mar-18 22:45:52 LOG3    vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_034"
2009-Mar-18 22:45:52 LOG3    vw_send: To DATATAKING: set ra 147.43
2009-Mar-18 22:45:52 LOG3    vw_send: To DATATAKING: set dec 5.5632217933
2009-Mar-18 22:45:52 LOG3    vw_send: To DATATAKING: pnt tr send
2009-Mar-18 22:45:52 LOG3    vw_send: To DATATAKING: pnt tr 147.43 5.5632217933 -CF
2009-Mar-18 22:45:52 LOG3    vw_send: To DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 22:45:52 STOP    finish_task: Finishing task 'sending tracking commands'
2009-Mar-18 22:45:52 LOG5    finish_task: Level: (3)    ID = <10186>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:52 INFO2   finish_task: DONE finished sending: tracking commands
2009-Mar-18 22:45:52 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 22:45:52 STOP    end_task: Finishing task 'sending tracking commands' with status 'OK'
2009-Mar-18 22:45:52 LOG5    end_task: Level: (3)    ID = <10186>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:52 LOG1    fixed_driftmap: Parameters: HA = +00:13:00.1  Start = 10:06:33.4  LST = 10:05:58.9  diff = 34.5 secs
2009-Mar-18 22:45:52 INFO2   fixed_driftmap: Waiting 32.5 seconds for RA 9:53:33
2009-Mar-18 22:45:52 INFO2   lstwait: Waiting for 32.4 secs from LST 10:05:59 to LST 10:06:31 ...
2009-Mar-18 22:45:52 LOG4    send_obs_status: To obs_status: <1> TASKTIME 32.436863027575171 BITMAP stat_wait MESSAGE {Waiting ...}
2009-Mar-18 22:45:52 START   begin_task: Starting task 'waiting on wait on LST'
2009-Mar-18 22:45:52 LOG5    begin_task: Level: (3)    ID = <10187>    Status = 0 0 0 0  ok
2009-Mar-18 22:45:52 LOG4    got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_034"
2009-Mar-18 22:45:52 LOG4    got_cormsg: From DATATAKING: set ra 147.43
2009-Mar-18 22:45:52 LOG4    got_cormsg: From DATATAKING: set dec 5.5632217933
2009-Mar-18 22:45:52 LOG4    got_cormsg: From DATATAKING: vw% 147.43
2009-Mar-18 22:45:52 LOG4    got_cormsg: From DATATAKING: vw% 5.5632217933
2009-Mar-18 22:45:52 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:45:52 LOG4    got_cormsg: From DATATAKING: pnt tr send
2009-Mar-18 22:45:52 LOG4    got_cormsg: From DATATAKING: pnt tr 147.43 5.5632217933 -CF
2009-Mar-18 22:45:52 LOG4    got_cormsg: From DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 22:45:52 LOG4    got_cormsg: From DATATAKING: vw% vw%
2009-Mar-18 22:45:52 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 22:45:56 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 22:46:24 STOP    end_task: Finishing task 'waiting on wait on LST' with status 'OK'
2009-Mar-18 22:46:24 LOG5    end_task: Level: (3)    ID = <10187>    Status = 0 0 0 0  ok
2009-Mar-18 22:46:24 LOG4    lstwait: Finished waiting 0.57 seconds late
2009-Mar-18 22:46:24 INFO3   lstwait: Finished waiting
2009-Mar-18 22:46:24 LOG4    send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy
2009-Mar-18 22:46:24 INFO2   fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1
2009-Mar-18 22:46:24 LOG4    send_obs_status: To obs_status: <1> LOOP 1
2009-Mar-18 22:46:24 LOG4    send_obs_status: To obs_status: <1> INFO {Making drift scan}
2009-Mar-18 22:46:24 LOG4    send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...}
2009-Mar-18 22:46:24 LOG4    take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -'
2009-Mar-18 22:46:24 START   begin_task: Starting task 'WAPP spectral observation'
2009-Mar-18 22:46:24 LOG5    begin_task: Level: (3)    ID = <10188>    Status = 0 0 0 0  ok
2009-Mar-18 22:46:24 LOG5    log_alfabeam: Can't log alfabeam, not J2000
2009-Mar-18 22:46:24 INFO2   take_data: Starting WAPP scan: 907700192
2009-Mar-18 22:46:25 LOG4    send_obs_status: To obs_status: <0> TASKTIME 1200
2009-Mar-18 22:46:25 START   begin_task: Starting task 'waiting on WAPP spectra'
2009-Mar-18 22:46:25 LOG5    begin_task: Level: (4)    ID = <10189>    Status = 0 0 0 0  ok
2009-Mar-18 22:46:25 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 22:46:25 INFO1   WAPP=1+2+3+4-start_spectra: start sec 9986.00
2009-Mar-18 22:46:27 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.165299 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 22:46:27 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.165299 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:46:27 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.165299 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:46:27 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.165299 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:46:27 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.165299 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 22:46:27 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.165299 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:46:27 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.165299 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:46:27 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.165299 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 22:46:27 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.165299 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 22:46:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 22:46:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:46:31 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 22:46:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 22:46:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:46:37 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:46:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:46:39 LOG4    check_wapp_levels: WAPP-1 power levels:    1.022  0.954    0.914  1.105
2009-Mar-18 22:46:39 LOG4    check_wapp_levels: WAPP-2 power levels:    1.073  1.013    0.916  0.913
2009-Mar-18 22:46:39 LOG4    check_wapp_levels: WAPP-3 power levels:    0.932  1.015    1.102  0.971
2009-Mar-18 22:46:39 LOG4    check_wapp_levels: WAPP-4 power levels:    0.940  0.108    1.037  0.119
2009-Mar-18 22:46:41 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:46:43 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 22:46:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:46:48 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:46:50 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:46:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 22:46:54 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad)
2009-Mar-18 22:46:56 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 22:46:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:47:00 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 22:47:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:47:04 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 22:47:06 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:47:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 22:47:10 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:47:12 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad)
2009-Mar-18 22:47:14 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:47:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:47:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 22:47:20 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:47:22 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:47:24 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 22:47:26 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:47:28 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:47:30 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:47:32 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:47:34 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad)
2009-Mar-18 22:47:36 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 22:47:38 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:47:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 22:47:40 LOG4    check_wapp_levels: WAPP-1 power levels:    1.026  0.958    0.914  1.105
2009-Mar-18 22:47:40 LOG4    check_wapp_levels: WAPP-2 power levels:    1.077  1.015    0.916  0.912
2009-Mar-18 22:47:40 LOG4    check_wapp_levels: WAPP-3 power levels:    0.937  1.021    1.109  0.974
2009-Mar-18 22:47:40 LOG4    check_wapp_levels: WAPP-4 power levels:    0.941  0.109    1.040  0.119
2009-Mar-18 22:47:42 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 22:47:44 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 22:47:46 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad)
2009-Mar-18 22:47:48 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 22:47:50 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 22:47:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 22:47:54 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad)
2009-Mar-18 22:47:56 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.127 (still bad)
2009-Mar-18 22:47:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.136 (still bad)
2009-Mar-18 22:48:00 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.145 (still bad)
2009-Mar-18 22:48:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.146 (still bad)
2009-Mar-18 22:48:04 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.146 (still bad)
2009-Mar-18 22:48:06 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.138 (still bad)
2009-Mar-18 22:48:08 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad)
2009-Mar-18 22:48:10 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:48:12 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad)
2009-Mar-18 22:48:15 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 22:48:17 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 22:48:19 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad)
2009-Mar-18 22:48:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 22:48:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad)
2009-Mar-18 22:48:25 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad)
2009-Mar-18 22:48:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 22:48:29 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 22:48:31 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 22:48:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad)
2009-Mar-18 22:48:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 22:48:37 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 22:48:39 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 22:48:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 22:48:41 LOG4    check_wapp_levels: WAPP-1 power levels:    1.024  0.958    0.913  1.105
2009-Mar-18 22:48:41 LOG4    check_wapp_levels: WAPP-2 power levels:    1.072  1.012    0.915  0.912
2009-Mar-18 22:48:41 LOG4    check_wapp_levels: WAPP-3 power levels:    0.931  1.014    1.109  0.973
2009-Mar-18 22:48:41 LOG4    check_wapp_levels: WAPP-4 power levels:    0.942  0.109    1.041  0.119
2009-Mar-18 22:48:43 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 22:48:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad)
2009-Mar-18 22:48:47 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad)
2009-Mar-18 22:48:49 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 22:48:51 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad)
2009-Mar-18 22:48:53 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad)
2009-Mar-18 22:48:55 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad)
2009-Mar-18 22:48:57 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:48:59 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 22:49:01 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:49:03 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:49:05 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad)
2009-Mar-18 22:49:07 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:49:09 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:49:11 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:49:13 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:49:15 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 22:49:17 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:49:19 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:49:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:49:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:49:25 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:49:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:49:29 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad)
2009-Mar-18 22:49:31 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:49:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:49:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 22:49:37 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:49:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 22:49:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:49:42 LOG4    check_wapp_levels: WAPP-1 power levels:    1.025  0.960    0.914  1.105
2009-Mar-18 22:49:42 LOG4    check_wapp_levels: WAPP-2 power levels:    1.074  1.014    0.915  0.912
2009-Mar-18 22:49:42 LOG4    check_wapp_levels: WAPP-3 power levels:    0.929  1.013    1.106  0.971
2009-Mar-18 22:49:42 LOG4    check_wapp_levels: WAPP-4 power levels:    0.941  0.108    1.040  0.119
2009-Mar-18 22:49:44 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:49:46 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:49:48 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad)
2009-Mar-18 22:49:50 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:49:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 22:49:54 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad)
2009-Mar-18 22:49:56 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:49:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:50:00 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 22:50:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 22:50:04 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:50:06 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad)
2009-Mar-18 22:50:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:50:10 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:50:12 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 22:50:14 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 22:50:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad)
2009-Mar-18 22:50:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad)
2009-Mar-18 22:50:20 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:50:22 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 22:50:24 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad)
2009-Mar-18 22:50:26 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad)
2009-Mar-18 22:50:28 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 22:50:30 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 22:50:32 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.130 (still bad)
2009-Mar-18 22:50:34 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.137 (still bad)
2009-Mar-18 22:50:36 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.143 (still bad)
2009-Mar-18 22:50:38 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.138 (still bad)
2009-Mar-18 22:50:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.135 (still bad)
2009-Mar-18 22:50:42 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad)
2009-Mar-18 22:50:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:50:44 LOG4    check_wapp_levels: WAPP-1 power levels:    1.022  0.956    0.914  1.105
2009-Mar-18 22:50:44 LOG4    check_wapp_levels: WAPP-2 power levels:    1.074  1.013    0.915  0.908
2009-Mar-18 22:50:44 LOG4    check_wapp_levels: WAPP-3 power levels:    0.927  1.009    1.121  0.984
2009-Mar-18 22:50:44 LOG4    check_wapp_levels: WAPP-4 power levels:    0.940  0.108    1.039  0.119
2009-Mar-18 22:50:46 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad)
2009-Mar-18 22:50:48 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 22:50:50 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad)
2009-Mar-18 22:50:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 22:50:54 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 22:50:56 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad)
2009-Mar-18 22:50:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 22:51:00 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.118 (still bad)
2009-Mar-18 22:51:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 22:51:05 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad)
2009-Mar-18 22:51:07 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad)
2009-Mar-18 22:51:09 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:51:11 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:51:13 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 22:51:15 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:51:17 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 22:51:19 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad)
2009-Mar-18 22:51:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:51:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:51:25 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 22:51:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:51:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:51:31 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad)
2009-Mar-18 22:51:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:51:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:51:37 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 22:51:39 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:51:41 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:51:43 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad)
2009-Mar-18 22:51:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:51:45 LOG4    check_wapp_levels: WAPP-1 power levels:    1.026  0.956    0.914  1.106
2009-Mar-18 22:51:45 LOG4    check_wapp_levels: WAPP-2 power levels:    1.077  1.014    0.915  0.909
2009-Mar-18 22:51:45 LOG4    check_wapp_levels: WAPP-3 power levels:    0.927  1.010    1.106  0.972
2009-Mar-18 22:51:45 LOG4    check_wapp_levels: WAPP-4 power levels:    0.944  0.108    1.042  0.119
2009-Mar-18 22:51:47 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:51:49 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 22:51:51 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:51:53 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:51:55 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:51:57 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 22:51:59 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:52:01 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:52:03 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:52:05 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:52:07 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:52:09 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:52:11 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:52:13 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad)
2009-Mar-18 22:52:15 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:52:17 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 22:52:19 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:52:21 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad)
2009-Mar-18 22:52:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:52:25 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:52:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:52:30 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:52:32 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:52:34 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad)
2009-Mar-18 22:52:36 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad)
2009-Mar-18 22:52:38 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad)
2009-Mar-18 22:52:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:52:42 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:52:44 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:52:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:52:46 LOG4    check_wapp_levels: WAPP-1 power levels:    1.024  0.960    0.913  1.103
2009-Mar-18 22:52:46 LOG4    check_wapp_levels: WAPP-2 power levels:    1.075  1.010    0.915  0.909
2009-Mar-18 22:52:46 LOG4    check_wapp_levels: WAPP-3 power levels:    0.926  1.008    1.108  0.973
2009-Mar-18 22:52:46 LOG4    check_wapp_levels: WAPP-4 power levels:    0.943  0.108    1.041  0.119
2009-Mar-18 22:52:48 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:52:50 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:52:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:52:54 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:52:56 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad)
2009-Mar-18 22:52:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:53:00 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad)
2009-Mar-18 22:53:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:53:04 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:53:06 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 22:53:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:53:10 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad)
2009-Mar-18 22:53:12 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:53:14 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:53:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 22:53:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:53:20 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:53:22 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:53:24 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 22:53:26 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:53:28 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:53:30 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad)
2009-Mar-18 22:53:32 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:53:34 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad)
2009-Mar-18 22:53:36 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad)
2009-Mar-18 22:53:38 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:53:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:53:42 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 22:53:44 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 22:53:46 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad)
2009-Mar-18 22:53:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 22:53:48 LOG4    check_wapp_levels: WAPP-1 power levels:    1.025  0.961    0.918  1.109
2009-Mar-18 22:53:48 LOG4    check_wapp_levels: WAPP-2 power levels:    1.081  1.017    0.919  0.911
2009-Mar-18 22:53:48 LOG4    check_wapp_levels: WAPP-3 power levels:    0.928  1.009    1.106  0.974
2009-Mar-18 22:53:48 LOG4    check_wapp_levels: WAPP-4 power levels:    0.947  0.109    1.045  0.119
2009-Mar-18 22:53:49 LOG3    WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964  diff = 2)!
2009-Mar-18 22:53:50 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:53:52 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad)
2009-Mar-18 22:53:55 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad)
2009-Mar-18 22:53:57 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:53:59 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:54:01 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 22:54:03 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:54:05 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 22:54:07 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:54:09 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 22:54:11 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:54:13 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 22:54:15 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:54:17 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:54:19 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad)
2009-Mar-18 22:54:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:54:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:54:25 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 22:54:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:54:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:54:31 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad)
2009-Mar-18 22:54:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 22:54:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:54:37 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 22:54:39 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 22:54:41 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad)
2009-Mar-18 22:54:43 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 22:54:45 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 22:54:47 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 22:54:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:54:49 LOG4    check_wapp_levels: WAPP-1 power levels:    1.026  0.960    0.916  1.107
2009-Mar-18 22:54:49 LOG4    check_wapp_levels: WAPP-2 power levels:    1.079  1.016    0.919  0.915
2009-Mar-18 22:54:49 LOG4    check_wapp_levels: WAPP-3 power levels:    0.929  1.010    1.120  0.981
2009-Mar-18 22:54:49 LOG4    check_wapp_levels: WAPP-4 power levels:    0.946  0.108    1.047  0.119
2009-Mar-18 22:54:51 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad)
2009-Mar-18 22:54:53 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad)
2009-Mar-18 22:54:55 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad)
2009-Mar-18 22:54:57 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 22:54:59 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad)
2009-Mar-18 22:55:01 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 22:55:03 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:55:05 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:55:07 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 22:55:09 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 22:55:11 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 22:55:14 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 22:55:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad)
2009-Mar-18 22:55:18 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad)
2009-Mar-18 22:55:20 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad)
2009-Mar-18 22:55:22 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad)
2009-Mar-18 22:55:24 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 22:55:26 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 22:55:28 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad)
2009-Mar-18 22:55:30 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad)
2009-Mar-18 22:55:32 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 22:55:34 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad)
2009-Mar-18 22:55:36 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad)
2009-Mar-18 22:55:38 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 22:55:40 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad)
2009-Mar-18 22:55:42 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.106 (still bad)
2009-Mar-18 22:55:44 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad)
2009-Mar-18 22:55:46 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad)
2009-Mar-18 22:55:48 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad)
2009-Mar-18 22:55:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 22:55:50 LOG4    check_wapp_levels: WAPP-1 power levels:    1.026  0.961    0.915  1.106
2009-Mar-18 22:55:50 LOG4    check_wapp_levels: WAPP-2 power levels:    1.087  1.021    0.919  0.914
2009-Mar-18 22:55:50 LOG4    check_wapp_levels: WAPP-3 power levels:    0.928  1.012    1.112  0.974
2009-Mar-18 22:55:50 LOG4    check_wapp_levels: WAPP-4 power levels:    0.945  0.109    1.043  0.119
2009-Mar-18 22:55:52 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad)
2009-Mar-18 22:55:54 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 22:55:56 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 22:55:58 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 22:56:00 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad)
2009-Mar-18 22:56:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 22:56:04 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad)
2009-Mar-18 22:56:06 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad)
2009-Mar-18 22:56:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:56:10 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 22:56:12 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad)
2009-Mar-18 22:56:14 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad)
2009-Mar-18 22:56:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad)
2009-Mar-18 22:56:18 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 22:56:20 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 22:56:22 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:56:24 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:56:26 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 22:56:28 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 22:56:30 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad)
2009-Mar-18 22:56:32 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 22:56:34 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 22:56:36 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad)
2009-Mar-18 22:56:39 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 22:56:41 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad)
2009-Mar-18 22:56:43 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 22:56:45 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad)
2009-Mar-18 22:56:47 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad)
2009-Mar-18 22:56:49 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 22:56:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 22:56:51 LOG4    check_wapp_levels: WAPP-1 power levels:    1.025  0.959    0.915  1.107
2009-Mar-18 22:56:51 LOG4    check_wapp_levels: WAPP-2 power levels:    1.075  1.009    0.918  0.916
2009-Mar-18 22:56:51 LOG4    check_wapp_levels: WAPP-3 power levels:    0.926  1.005    1.108  0.975
2009-Mar-18 22:56:51 LOG4    check_wapp_levels: WAPP-4 power levels:    0.946  0.108    1.046  0.119
2009-Mar-18 22:56:53 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 22:56:55 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad)
2009-Mar-18 22:56:57 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 22:56:59 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 22:57:01 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 22:57:03 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 22:57:05 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad)
2009-Mar-18 22:57:07 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 22:57:09 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad)
2009-Mar-18 22:57:11 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 22:57:13 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 22:57:15 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 22:57:17 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 22:57:19 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 22:57:21 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 22:57:23 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 22:57:25 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad)
2009-Mar-18 22:57:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad)
2009-Mar-18 22:57:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 22:57:31 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad)
2009-Mar-18 22:57:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad)
2009-Mar-18 22:57:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 22:57:37 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad)
2009-Mar-18 22:57:39 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 22:57:41 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 22:57:43 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 22:57:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad)
2009-Mar-18 22:57:47 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 22:57:49 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 22:57:51 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad)
2009-Mar-18 22:57:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 22:57:53 LOG4    check_wapp_levels: WAPP-1 power levels:    1.023  0.959    0.914  1.104
2009-Mar-18 22:57:53 LOG4    check_wapp_levels: WAPP-2 power levels:    1.076  1.005    0.916  0.913
2009-Mar-18 22:57:53 LOG4    check_wapp_levels: WAPP-3 power levels:    0.924  0.999    1.112  0.975
2009-Mar-18 22:57:53 LOG4    check_wapp_levels: WAPP-4 power levels:    0.945  0.109    1.046  0.119
2009-Mar-18 22:57:55 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad)
2009-Mar-18 22:57:57 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 22:57:59 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 22:58:01 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 22:58:04 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 22:58:06 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 22:58:08 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 22:58:10 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 22:58:12 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 22:58:14 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 22:58:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 22:58:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad)
2009-Mar-18 22:58:20 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 22:58:22 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 22:58:24 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 22:58:26 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 22:58:28 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 22:58:30 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 22:58:32 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 22:58:34 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 22:58:36 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 22:58:38 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 22:58:40 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 22:58:42 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 22:58:44 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 22:58:46 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad)
2009-Mar-18 22:58:48 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 22:58:50 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad)
2009-Mar-18 22:58:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad)
2009-Mar-18 22:58:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 22:58:54 LOG4    check_wapp_levels: WAPP-1 power levels:    1.025  0.961    0.915  1.105
2009-Mar-18 22:58:54 LOG4    check_wapp_levels: WAPP-2 power levels:    1.077  1.009    0.918  0.913
2009-Mar-18 22:58:54 LOG4    check_wapp_levels: WAPP-3 power levels:    0.928  1.011    1.111  0.975
2009-Mar-18 22:58:54 LOG4    check_wapp_levels: WAPP-4 power levels:    0.946  0.109    1.045  0.119
2009-Mar-18 22:58:56 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 22:58:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad)
2009-Mar-18 22:59:00 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 22:59:02 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 22:59:04 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 22:59:06 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 22:59:08 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 22:59:10 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 22:59:12 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 22:59:14 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 22:59:16 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 22:59:18 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 22:59:20 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 22:59:22 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 22:59:24 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 22:59:27 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 22:59:29 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 22:59:31 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 22:59:33 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 22:59:35 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 22:59:37 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 22:59:39 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 22:59:41 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 22:59:43 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 22:59:45 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 22:59:47 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 22:59:49 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 22:59:51 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 22:59:53 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 22:59:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 22:59:55 LOG4    check_wapp_levels: WAPP-1 power levels:    1.023  0.959    0.913  1.107
2009-Mar-18 22:59:55 LOG4    check_wapp_levels: WAPP-2 power levels:    1.078  1.011    0.920  0.915
2009-Mar-18 22:59:55 LOG4    check_wapp_levels: WAPP-3 power levels:    0.928  1.010    1.110  0.977
2009-Mar-18 22:59:55 LOG4    check_wapp_levels: WAPP-4 power levels:    0.944  0.109    1.044  0.120
2009-Mar-18 22:59:57 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 22:59:59 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 23:00:01 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 23:00:03 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 23:00:05 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 23:00:07 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 23:00:09 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 23:00:11 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 23:00:13 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 23:00:15 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 23:00:17 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 23:00:19 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 23:00:21 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 23:00:23 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 23:00:25 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad)
2009-Mar-18 23:00:27 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad)
2009-Mar-18 23:00:29 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 23:00:31 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad)
2009-Mar-18 23:00:33 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad)
2009-Mar-18 23:00:35 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad)
2009-Mar-18 23:00:37 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad)
2009-Mar-18 23:00:39 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 23:00:41 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 23:00:44 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 23:00:46 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 23:00:48 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 23:00:50 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 23:00:52 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 23:00:54 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad)
2009-Mar-18 23:00:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 23:00:56 LOG4    check_wapp_levels: WAPP-1 power levels:    1.026  0.964    0.916  1.105
2009-Mar-18 23:00:56 LOG4    check_wapp_levels: WAPP-2 power levels:    1.075  1.008    0.918  0.913
2009-Mar-18 23:00:56 LOG4    check_wapp_levels: WAPP-3 power levels:    0.926  1.004    1.112  0.975
2009-Mar-18 23:00:56 LOG4    check_wapp_levels: WAPP-4 power levels:    0.959  0.109    1.061  0.119
2009-Mar-18 23:00:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 23:01:00 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 23:01:02 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 23:01:04 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 23:01:06 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 23:01:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 23:01:10 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 23:01:12 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 23:01:14 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 23:01:16 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 23:01:18 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 23:01:20 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 23:01:22 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad)
2009-Mar-18 23:01:24 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 23:01:26 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 23:01:28 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 23:01:30 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 23:01:32 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad)
2009-Mar-18 23:01:34 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 23:01:36 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 23:01:38 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 23:01:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 23:01:42 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 23:01:44 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 23:01:46 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 23:01:48 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 23:01:50 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 23:01:52 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad)
2009-Mar-18 23:01:54 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 23:01:56 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 23:01:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 23:01:58 LOG4    check_wapp_levels: WAPP-1 power levels:    1.046  0.984    0.913  1.103
2009-Mar-18 23:01:58 LOG4    check_wapp_levels: WAPP-2 power levels:    1.076  1.008    0.915  0.909
2009-Mar-18 23:01:58 LOG4    check_wapp_levels: WAPP-3 power levels:    0.923  0.999    1.107  0.971
2009-Mar-18 23:01:58 LOG4    check_wapp_levels: WAPP-4 power levels:    0.946  0.109    1.046  0.119
2009-Mar-18 23:02:00 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 23:02:02 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 23:02:04 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 23:02:07 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 23:02:09 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 23:02:11 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad)
2009-Mar-18 23:02:13 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 23:02:15 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 23:02:17 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 23:02:19 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 23:02:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad)
2009-Mar-18 23:02:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad)
2009-Mar-18 23:02:25 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad)
2009-Mar-18 23:02:27 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad)
2009-Mar-18 23:02:29 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad)
2009-Mar-18 23:02:31 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad)
2009-Mar-18 23:02:33 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad)
2009-Mar-18 23:02:35 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad)
2009-Mar-18 23:02:37 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad)
2009-Mar-18 23:02:39 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 23:02:41 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 23:02:43 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 23:02:45 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 23:02:47 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 23:02:49 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad)
2009-Mar-18 23:02:51 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad)
2009-Mar-18 23:02:53 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 23:02:55 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad)
2009-Mar-18 23:02:57 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 23:02:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 23:02:59 LOG4    check_wapp_levels: WAPP-1 power levels:    1.019  0.959    0.912  1.105
2009-Mar-18 23:02:59 LOG4    check_wapp_levels: WAPP-2 power levels:    1.073  1.006    0.918  0.912
2009-Mar-18 23:02:59 LOG4    check_wapp_levels: WAPP-3 power levels:    0.922  1.002    1.114  0.975
2009-Mar-18 23:02:59 LOG4    check_wapp_levels: WAPP-4 power levels:    0.945  0.109    1.046  0.119
2009-Mar-18 23:03:01 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 23:03:03 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad)
2009-Mar-18 23:03:05 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 23:03:07 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 23:03:09 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 23:03:11 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 23:03:13 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 23:03:15 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 23:03:17 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 23:03:19 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 23:03:21 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 23:03:23 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 23:03:25 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad)
2009-Mar-18 23:03:27 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 23:03:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad)
2009-Mar-18 23:03:32 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 23:03:34 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 23:03:36 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 23:03:38 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 23:03:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad)
2009-Mar-18 23:03:42 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 23:03:44 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 23:03:46 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 23:03:48 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 23:03:50 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad)
2009-Mar-18 23:03:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad)
2009-Mar-18 23:03:54 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 23:03:56 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 23:03:58 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 23:04:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 23:04:00 LOG4    check_wapp_levels: WAPP-1 power levels:    1.021  0.963    0.915  1.107
2009-Mar-18 23:04:00 LOG4    check_wapp_levels: WAPP-2 power levels:    1.073  1.004    0.917  0.911
2009-Mar-18 23:04:00 LOG4    check_wapp_levels: WAPP-3 power levels:    0.925  1.006    1.113  0.974
2009-Mar-18 23:04:00 LOG4    check_wapp_levels: WAPP-4 power levels:    0.947  0.108    1.045  0.119
2009-Mar-18 23:04:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad)
2009-Mar-18 23:04:04 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 23:04:06 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 23:04:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad)
2009-Mar-18 23:04:10 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 23:04:12 LOG3    WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964  diff = 2)!
2009-Mar-18 23:04:12 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad)
2009-Mar-18 23:04:14 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 23:04:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 23:04:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad)
2009-Mar-18 23:04:20 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad)
2009-Mar-18 23:04:22 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 23:04:24 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 23:04:26 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 23:04:28 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad)
2009-Mar-18 23:04:30 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 23:04:32 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad)
2009-Mar-18 23:04:34 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad)
2009-Mar-18 23:04:36 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad)
2009-Mar-18 23:04:38 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 23:04:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 23:04:42 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 23:04:44 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 23:04:46 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 23:04:48 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad)
2009-Mar-18 23:04:50 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 23:04:53 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 23:04:55 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 23:04:57 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 23:04:59 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 23:05:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 23:05:01 LOG4    check_wapp_levels: WAPP-1 power levels:    1.022  0.965    0.915  1.105
2009-Mar-18 23:05:01 LOG4    check_wapp_levels: WAPP-2 power levels:    1.078  1.009    0.920  0.917
2009-Mar-18 23:05:01 LOG4    check_wapp_levels: WAPP-3 power levels:    0.924  1.001    1.111  0.971
2009-Mar-18 23:05:01 LOG4    check_wapp_levels: WAPP-4 power levels:    0.949  0.109    1.048  0.119
2009-Mar-18 23:05:03 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 23:05:05 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 23:05:07 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 23:05:09 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad)
2009-Mar-18 23:05:11 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad)
2009-Mar-18 23:05:13 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad)
2009-Mar-18 23:05:15 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad)
2009-Mar-18 23:05:17 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 23:05:19 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 23:05:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 23:05:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad)
2009-Mar-18 23:05:25 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad)
2009-Mar-18 23:05:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad)
2009-Mar-18 23:05:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 23:05:31 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 23:05:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 23:05:35 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 23:05:37 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 23:05:39 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 23:05:41 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 23:05:43 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad)
2009-Mar-18 23:05:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.122 (still bad)
2009-Mar-18 23:05:47 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 23:05:49 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad)
2009-Mar-18 23:05:51 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 23:05:53 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad)
2009-Mar-18 23:05:55 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad)
2009-Mar-18 23:05:57 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad)
2009-Mar-18 23:05:59 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad)
2009-Mar-18 23:06:01 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 23:06:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 23:06:03 LOG4    check_wapp_levels: WAPP-1 power levels:    1.020  0.962    0.914  1.106
2009-Mar-18 23:06:03 LOG4    check_wapp_levels: WAPP-2 power levels:    1.080  1.012    0.927  0.923
2009-Mar-18 23:06:03 LOG4    check_wapp_levels: WAPP-3 power levels:    0.933  1.014    1.112  0.978
2009-Mar-18 23:06:03 LOG4    check_wapp_levels: WAPP-4 power levels:    0.947  0.108    1.047  0.119
2009-Mar-18 23:06:05 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad)
2009-Mar-18 23:06:07 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad)
2009-Mar-18 23:06:09 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 23:06:11 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad)
2009-Mar-18 23:06:13 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad)
2009-Mar-18 23:06:15 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad)
2009-Mar-18 23:06:17 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 23:06:19 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 23:06:21 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 23:06:24 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 23:06:26 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 23:06:26 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 23:06:26 STOP    end_task: Finishing task 'waiting on WAPP spectra' with status 'OK'
2009-Mar-18 23:06:26 LOG5    end_task: Level: (4)    ID = <10189>    Status = 0 0 0 0  ok
2009-Mar-18 23:06:26 STOP    end_task: Finishing task 'WAPP spectral observation' with status 'OK'
2009-Mar-18 23:06:26 LOG5    end_task: Level: (3)    ID = <10188>    Status = 0 0 0 0  ok
2009-Mar-18 23:06:26 STOP    finish_task: Finishing task 'fixed azimuth drift map'
2009-Mar-18 23:06:26 LOG5    finish_task: Level: (2)    ID = <10155>    Status = 0 0 0 0  ok
2009-Mar-18 23:06:26 DONE    finish_task: DONE finished pattern: fixed azimuth drift map
2009-Mar-18 23:06:26 LOG4    send_obs_status: To obs_status: <1> ENDTASK Finished
2009-Mar-18 23:06:26 END     end_task: Finishing task 'fixed azimuth drift map' with status 'OK'
2009-Mar-18 23:06:26 LOG5    end_task: Level: (2)    ID = <10155>    Status = 0 0 0 0  ok
2009-Mar-18 23:06:26 COMMAND run_command_line: EXECUTING command 19: 'ENDIF'
2009-Mar-18 23:06:26 COMMAND run_command_line: EXECUTING command 22: 'IF LSTSLEW(AGES3193_p2_036) < 102932 THEN'
2009-Mar-18 23:06:27 INFO5   is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_036) < 102932
2009-Mar-18 23:06:27 INFO5   is_if_valid: Condition parsed as: 10.467029333333333 < 10.492222222222221
2009-Mar-18 23:06:27 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=120.23 alfaangle=78.4  epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_036 ra=95300.00 dec=230030.00'
2009-Mar-18 23:06:27 LOG2    check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map'
2009-Mar-18 23:06:27 LOG4    exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok
2009-Mar-18 23:06:27 LOG1    fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 120.23 78.4 hcorcal 5 tracking no first 1 AGES3193_p2_036 95300.00 230030.00 J 8500.0 Heliocentric velocity(optical)'
2009-Mar-18 23:06:27 BEGIN   begin_task: Starting task 'fixed azimuth drift map'
2009-Mar-18 23:06:27 LOG5    begin_task: Level: (2)    ID = <10190>    Status = 0 0 0 0  ok
2009-Mar-18 23:06:27 INFO4   begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_034'
2009-Mar-18 23:06:27 INFO1   fixed_driftmap: Starting pattern: Fixed azimuth drift map
2009-Mar-18 23:06:27 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1    INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_036}
2009-Mar-18 23:06:27 INFO3   fixed_driftmap: Sending telescope to Az = 120.23 and ZA = 9.60
2009-Mar-18 23:06:27 LOG3    track_source: Calling 'track_source AGES3193_p2_036 120.23 9.5962938186 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)'
2009-Mar-18 23:06:27 START   begin_task: Starting task 'sending tracking commands'
2009-Mar-18 23:06:27 LOG5    begin_task: Level: (3)    ID = <10191>    Status = 0 0 0 0  ok
2009-Mar-18 23:06:27 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_036}    INFO {Slewing to source 'AGES3193_p2_036' ...}
2009-Mar-18 23:06:27 INFO1   track_source: Starting to track AGES3193_p2_036
2009-Mar-18 23:06:27 LOG3    vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_036"
2009-Mar-18 23:06:27 LOG3    vw_send: To DATATAKING: set ra 120.23
2009-Mar-18 23:06:27 LOG3    vw_send: To DATATAKING: set dec 9.5962938186
2009-Mar-18 23:06:27 LOG3    vw_send: To DATATAKING: pnt tr send
2009-Mar-18 23:06:27 LOG3    vw_send: To DATATAKING: pnt tr 120.23 9.5962938186 -CF
2009-Mar-18 23:06:27 LOG3    vw_send: To DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 23:06:27 STOP    finish_task: Finishing task 'sending tracking commands'
2009-Mar-18 23:06:27 LOG5    finish_task: Level: (3)    ID = <10191>    Status = 0 0 0 0  ok
2009-Mar-18 23:06:27 INFO2   finish_task: DONE finished sending: tracking commands
2009-Mar-18 23:06:27 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 23:06:27 STOP    end_task: Finishing task 'sending tracking commands' with status 'OK'
2009-Mar-18 23:06:27 LOG5    end_task: Level: (3)    ID = <10191>    Status = 0 0 0 0  ok
2009-Mar-18 23:06:27 START   begin_task: Starting task 'rotate ALFA to +78.4 degrees'
2009-Mar-18 23:06:27 LOG5    begin_task: Level: (3)    ID = <10192>    Status = 0 0 0 0  ok
2009-Mar-18 23:06:27 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA}    INFO {Rotating ALFA to +78.4 degrees ...}
2009-Mar-18 23:06:27 INFO2   rotate_alfa: ALFA commanded to +78.4 degrees
2009-Mar-18 23:06:27 LOG3    sock_errsend: To ALFAMOTOR: POSITION 78.4 REPLY
2009-Mar-18 23:06:27 LOG4    send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...}
2009-Mar-18 23:06:27 START   begin_task: Starting task 'waiting on ALFA rotation'
2009-Mar-18 23:06:27 LOG5    begin_task: Level: (4)    ID = <10193>    Status = 0 0 0 0  ok
2009-Mar-18 23:06:27 LOG4    got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_036"
2009-Mar-18 23:06:27 LOG4    got_cormsg: From DATATAKING: set ra 120.23
2009-Mar-18 23:06:27 LOG4    got_cormsg: From DATATAKING: set dec 9.5962938186
2009-Mar-18 23:06:27 LOG4    got_cormsg: From DATATAKING: vw% 120.23
2009-Mar-18 23:06:27 LOG4    got_cormsg: From DATATAKING: vw% 9.5962938186
2009-Mar-18 23:06:27 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:06:27 LOG4    got_cormsg: From DATATAKING: pnt tr send
2009-Mar-18 23:06:27 LOG4    got_cormsg: From DATATAKING: pnt tr 120.23 9.5962938186 -CF
2009-Mar-18 23:06:27 LOG4    got_cormsg: From DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 23:06:27 LOG4    got_cormsg: From DATATAKING: vw% vw%
2009-Mar-18 23:06:27 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:06:28 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad)
2009-Mar-18 23:06:45 LOG4    exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION"
2009-Mar-18 23:06:45 INFO3   alfa_motor: ALFA rotator in-position +78.40 degrees
2009-Mar-18 23:06:45 STOP    end_task: Finishing task 'waiting on ALFA rotation' with status 'OK'
2009-Mar-18 23:06:45 LOG5    end_task: Level: (4)    ID = <10193>    Status = 0 0 0 0  ok
2009-Mar-18 23:06:45 LOG4    send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy
2009-Mar-18 23:06:45 STOP    finish_task: Finishing task 'rotate ALFA to +78.4 degrees'
2009-Mar-18 23:06:45 LOG5    finish_task: Level: (3)    ID = <10192>    Status = 0 0 0 0  ok
2009-Mar-18 23:06:45 INFO2   finish_task: DONE finished configuration: rotating ALFA to +78.4 degrees
2009-Mar-18 23:06:45 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 23:06:45 STOP    end_task: Finishing task 'rotate ALFA to +78.4 degrees' with status 'OK'
2009-Mar-18 23:06:45 LOG5    end_task: Level: (3)    ID = <10192>    Status = 0 0 0 0  ok
2009-Mar-18 23:06:45 START   begin_task: Starting task 'waiting on telescope'
2009-Mar-18 23:06:45 LOG5    begin_task: Level: (3)    ID = <10194>    Status = 0 0 0 0  ok
2009-Mar-18 23:06:45 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew    INFO {Waiting for telescope to track source ...}
2009-Mar-18 23:06:45 LOG3    waittrk: Start waittrk 5
2009-Mar-18 23:06:45 START   begin_task: Starting task 'waiting on telescope movement'
2009-Mar-18 23:06:45 LOG5    begin_task: Level: (4)    ID = <10195>    Status = 0 0 0 0  ok
2009-Mar-18 23:06:50 STOP    end_task: Finishing task 'waiting on telescope movement' with status 'OK'
2009-Mar-18 23:06:50 LOG5    end_task: Level: (4)    ID = <10195>    Status = 0 0 0 0  ok
2009-Mar-18 23:06:50 START   begin_task: Starting task 'waiting on telescope on source'
2009-Mar-18 23:06:50 LOG5    begin_task: Level: (4)    ID = <10196>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:13 STOP    end_task: Finishing task 'waiting on telescope on source' with status 'OK'
2009-Mar-18 23:08:13 LOG5    end_task: Level: (4)    ID = <10196>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:13 LOG4    send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy
2009-Mar-18 23:08:13 INFO2   waittrk: Now tracking AGES3193_p2_036
2009-Mar-18 23:08:13 LOG4    waittrk: Current telescope position:  Az = 120.02  ZA = 9.60
2009-Mar-18 23:08:13 STOP    finish_task: Finishing task 'waiting on telescope'
2009-Mar-18 23:08:13 LOG5    finish_task: Level: (3)    ID = <10194>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:13 INFO2   finish_task: DONE finished waiting: telescope on source
2009-Mar-18 23:08:13 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 23:08:13 STOP    end_task: Finishing task 'waiting on telescope' with status 'OK'
2009-Mar-18 23:08:13 LOG5    end_task: Level: (3)    ID = <10194>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:13 START   begin_task: Starting task 'selecting calibration type'
2009-Mar-18 23:08:13 LOG5    begin_task: Level: (3)    ID = <10197>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:13 LOG3    vw_send: To DATATAKING: setcal hcorcal
2009-Mar-18 23:08:13 LOG2    socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE'
2009-Mar-18 23:08:13 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 23:08:13 START   begin_task: Starting task 'waiting on setcal'
2009-Mar-18 23:08:13 LOG5    begin_task: Level: (4)    ID = <10198>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:13 LOG4    got_cormsg: From DATATAKING: setcal hcorcal
2009-Mar-18 23:08:13 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 23:08:14 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:08:14 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-18 23:08:14 STOP    end_task: Finishing task 'waiting on setcal' with status 'OK'
2009-Mar-18 23:08:14 LOG5    end_task: Level: (4)    ID = <10198>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:14 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'setcal'
2009-Mar-18 23:08:14 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-18 23:08:14 LOG3    socket_wait: To ALFAMON: CAL HI
2009-Mar-18 23:08:14 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-18 23:08:14 LOG5    begin_task: Level: (4)    ID = <10199>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:14 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:08:15 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-18 23:08:15 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-18 23:08:15 LOG5    end_task: Level: (4)    ID = <10199>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:15 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-18 23:08:15 LOG3    to_alfamon: To ALFAMON: CAL HI
2009-Mar-18 23:08:15 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-18 23:08:15 LOG3    socket_wait: To ALFAMON: NOISE ACTIVE
2009-Mar-18 23:08:15 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-18 23:08:15 LOG5    begin_task: Level: (4)    ID = <10200>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:15 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-18 23:08:15 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-18 23:08:15 LOG5    end_task: Level: (4)    ID = <10200>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:15 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-18 23:08:15 LOG3    to_alfamon: To ALFAMON: NOISE ACTIVE
2009-Mar-18 23:08:15 STOP    end_task: Finishing task 'selecting calibration type' with status 'OK'
2009-Mar-18 23:08:15 LOG5    end_task: Level: (3)    ID = <10197>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:15 LOG4    send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time}
2009-Mar-18 23:08:15 INFO2   astwait: Waiting for 7 seconds from 03:08:15 to 03:08:22 UTC ...
2009-Mar-18 23:08:15 LOG4    send_obs_status: To obs_status: <1> TASKTIME 7 BITMAP stat_wait MESSAGE {Waiting ...}
2009-Mar-18 23:08:15 START   begin_task: Starting task 'waiting on waiting for AST time'
2009-Mar-18 23:08:15 LOG5    begin_task: Level: (3)    ID = <10201>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:22 STOP    end_task: Finishing task 'waiting on waiting for AST time' with status 'OK'
2009-Mar-18 23:08:22 LOG5    end_task: Level: (3)    ID = <10201>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:22 INFO3   astwait: Finished waiting
2009-Mar-18 23:08:22 LOG4    send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy
2009-Mar-18 23:08:22 LOG5    dopset_later: Calling 'dopset_later 60.506236936580152'
2009-Mar-18 23:08:22 INFO3   dopset_later: Setting Doppler correction for 23:09:22 (60.5 seconds from now)
2009-Mar-18 23:08:22 LOG5    antvel: Calling 'antvel 120.230000 9.596294 F 60.506236936580152'
2009-Mar-18 23:08:22 LOG2    antvel: Transforming current Az = 120.23  ZA = 9.60 to apparent RA = 09:53:33.2  Dec = +22:57:47.4
2009-Mar-18 23:08:22 LOG2    antvel: Parameters to Doppler: Heliocentric 97762 2009 77 0.0
2009-Mar-18 23:08:22 INFO5   antvel: Computed antenna velocity: +17.00089 km/s
2009-Mar-18 23:08:22 LOG3    dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=17.000888212900001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786
2009-Mar-18 23:08:22 INFO4   dopset_gen: New sky frequencies: 1381.165104 1381.165104 1381.165104 1381.165104 1381.165104 1381.165104 1381.165104 1381.165104 1381.165104
2009-Mar-18 23:08:22 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1381.165104 sky0=1381.165104 sky1=1381.165104 sky2=1381.165104 sky3=1381.165104 sky4=1381.165104 sky5=1381.165104 sky6=1381.165104 sky7=1381.165104 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 23:08:22 LOG2    dopset_gen: Result from 'sky2syn': 1631.165104 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 23:08:22 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1631165104.0}
2009-Mar-18 23:08:22 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 23:08:22 LOG4    send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation}
2009-Mar-18 23:08:22 INFO3   fixed_driftmap: Switching to tracking mode for calibration
2009-Mar-18 23:08:22 INFO5   fixed_driftmap: Tracking J2000 position:  RA = 09:52:04.6  Dec = +23:00:24.2
2009-Mar-18 23:08:22 LOG3    track_source: Calling 'track_source AGES3193_p2_036 095204.6 230024.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)'
2009-Mar-18 23:08:22 START   begin_task: Starting task 'sending tracking commands'
2009-Mar-18 23:08:22 LOG5    begin_task: Level: (3)    ID = <10202>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:22 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_036}    INFO {Slewing to source 'AGES3193_p2_036' ...}
2009-Mar-18 23:08:22 INFO1   track_source: Starting to track AGES3193_p2_036
2009-Mar-18 23:08:22 LOG3    vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_036"
2009-Mar-18 23:08:22 LOG3    vw_send: To DATATAKING: set ra 095204.6
2009-Mar-18 23:08:22 LOG3    vw_send: To DATATAKING: set dec 230024.2
2009-Mar-18 23:08:22 LOG3    vw_send: To DATATAKING: pnt tr send
2009-Mar-18 23:08:22 LOG3    vw_send: To DATATAKING: pnt tr 095204.6 230024.2 -CJ
2009-Mar-18 23:08:22 LOG3    vw_send: To DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 23:08:22 STOP    finish_task: Finishing task 'sending tracking commands'
2009-Mar-18 23:08:22 LOG5    finish_task: Level: (3)    ID = <10202>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:22 INFO2   finish_task: DONE finished sending: tracking commands
2009-Mar-18 23:08:22 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 23:08:22 STOP    end_task: Finishing task 'sending tracking commands' with status 'OK'
2009-Mar-18 23:08:22 LOG5    end_task: Level: (3)    ID = <10202>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:22 START   begin_task: Starting task 'waiting on telescope'
2009-Mar-18 23:08:22 LOG5    begin_task: Level: (3)    ID = <10203>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:22 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew    INFO {Waiting for telescope to track source ...}
2009-Mar-18 23:08:22 LOG3    waittrk: Start waittrk 5
2009-Mar-18 23:08:22 START   begin_task: Starting task 'waiting on telescope movement'
2009-Mar-18 23:08:22 LOG5    begin_task: Level: (4)    ID = <10204>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:22 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1631165104.0}
2009-Mar-18 23:08:22 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 23:08:22 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:08:22 LOG4    got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_036"
2009-Mar-18 23:08:22 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:08:22 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:08:22 LOG4    got_cormsg: From DATATAKING: set ra 095204.6
2009-Mar-18 23:08:22 LOG4    got_cormsg: From DATATAKING: set dec 230024.2
2009-Mar-18 23:08:22 LOG4    got_cormsg: From DATATAKING: pnt tr send
2009-Mar-18 23:08:22 LOG4    got_cormsg: From DATATAKING: pnt tr 095204.6 230024.2 -CJ
2009-Mar-18 23:08:22 LOG4    got_cormsg: From DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 23:08:22 LOG4    got_cormsg: From DATATAKING: 095204.6
2009-Mar-18 23:08:22 LOG4    got_cormsg: From DATATAKING: vw% 230024.2
2009-Mar-18 23:08:22 LOG4    got_cormsg: From DATATAKING: vw% vw% vw% vw%
2009-Mar-18 23:08:27 STOP    end_task: Finishing task 'waiting on telescope movement' with status 'OK'
2009-Mar-18 23:08:27 LOG5    end_task: Level: (4)    ID = <10204>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:27 START   begin_task: Starting task 'waiting on telescope on source'
2009-Mar-18 23:08:27 LOG5    begin_task: Level: (4)    ID = <10205>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:29 STOP    end_task: Finishing task 'waiting on telescope on source' with status 'OK'
2009-Mar-18 23:08:29 LOG5    end_task: Level: (4)    ID = <10205>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:29 LOG4    send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy
2009-Mar-18 23:08:29 INFO2   waittrk: Now tracking AGES3193_p2_036
2009-Mar-18 23:08:29 LOG4    waittrk: Current telescope position:  Az = 119.98  ZA = 9.61
2009-Mar-18 23:08:29 STOP    finish_task: Finishing task 'waiting on telescope'
2009-Mar-18 23:08:29 LOG5    finish_task: Level: (3)    ID = <10203>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:29 INFO2   finish_task: DONE finished waiting: telescope on source
2009-Mar-18 23:08:29 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 23:08:29 STOP    end_task: Finishing task 'waiting on telescope' with status 'OK'
2009-Mar-18 23:08:29 LOG5    end_task: Level: (3)    ID = <10203>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:29 START   begin_task: Starting task 'adjusting WAPP power'
2009-Mar-18 23:08:29 LOG5    begin_task: Level: (3)    ID = <10206>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:29 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT    BITMAP stat_power INFO {Adjusting WAPP power ...}
2009-Mar-18 23:08:29 INFO2   adjust_power: Starting to adjust WAPP power
2009-Mar-18 23:08:29 LOG3    vw_send: To DATATAKING: adjpwrif2 
2009-Mar-18 23:08:29 LOG2    socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE'
2009-Mar-18 23:08:29 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 23:08:29 START   begin_task: Starting task 'waiting on adjpwrif2'
2009-Mar-18 23:08:29 LOG5    begin_task: Level: (4)    ID = <10207>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:30 LOG4    got_cormsg: From DATATAKING: adjpwrif2
2009-Mar-18 23:08:30 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 23:08:32 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:08:32 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-18 23:08:32 STOP    end_task: Finishing task 'waiting on adjpwrif2' with status 'OK'
2009-Mar-18 23:08:32 LOG5    end_task: Level: (4)    ID = <10207>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:32 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2'
2009-Mar-18 23:08:32 START   begin_task: Starting task 'adjusting WAPP power'
2009-Mar-18 23:08:32 LOG5    begin_task: Level: (4)    ID = <10208>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:32 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT    BITMAP stat_power INFO {Adjusting power ...}
2009-Mar-18 23:08:33 LOG3    sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-18 23:08:33 LOG3    sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-18 23:08:33 LOG3    sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-18 23:08:33 LOG3    sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-18 23:08:33 START   begin_task: Starting task 'waiting on adjust WAPP power'
2009-Mar-18 23:08:33 LOG5    begin_task: Level: (5)    ID = <10209>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:33 LOG4    WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1'
2009-Mar-18 23:08:33 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:08:33 INFO2   WAPP=1-auto_atten_dual: Attenuators beam 0:  7  6 dB  ---  beam 1:  7  7 dB
2009-Mar-18 23:08:33 INFO2   WAPP=3-auto_atten_dual: Attenuators beam 4:  3  1 dB  ---  beam 5:  5  4 dB
2009-Mar-18 23:08:33 INFO2   WAPP=2-auto_atten_dual: Attenuators beam 2:  7  4 dB  ---  beam 3:  4  3 dB
2009-Mar-18 23:08:33 INFO2   WAPP=4-auto_atten_dual: Attenuators beam 6:  3  0 dB  ---  beam 7:  2  0 dB
2009-Mar-18 23:08:33 INFO1   WAPP=1+2+3+4-adjust_power: DONE adjusting power
2009-Mar-18 23:08:33 STOP    end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK'
2009-Mar-18 23:08:33 LOG5    end_task: Level: (5)    ID = <10209>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:33 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 0:  1.043  0.971    ALFA beam 1:  0.941  0.909
2009-Mar-18 23:08:33 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 2:  0.896  1.044    ALFA beam 3:  0.943  0.916
2009-Mar-18 23:08:33 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 4:  0.940  1.004    ALFA beam 5:  1.114  0.984
2009-Mar-18 23:08:33 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 6:  0.960  0.109    ALFA beam 7:  1.060  0.120
2009-Mar-18 23:08:33 STOP    finish_task: Finishing task 'adjusting WAPP power'
2009-Mar-18 23:08:33 LOG5    finish_task: Level: (4)    ID = <10208>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:33 INFO3   finish_task: DONE finished adjusting: WAPP power
2009-Mar-18 23:08:33 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 23:08:33 STOP    end_task: Finishing task 'adjusting WAPP power' with status 'OK'
2009-Mar-18 23:08:33 LOG5    end_task: Level: (4)    ID = <10208>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:33 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_busy
2009-Mar-18 23:08:33 STOP    finish_task: Finishing task 'adjusting WAPP power'
2009-Mar-18 23:08:33 LOG5    finish_task: Level: (3)    ID = <10206>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:33 INFO2   finish_task: DONE finished adjusting: WAPP power levels
2009-Mar-18 23:08:33 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 23:08:33 STOP    end_task: Finishing task 'adjusting WAPP power' with status 'OK'
2009-Mar-18 23:08:33 LOG5    end_task: Level: (3)    ID = <10206>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:33 LOG3    send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin
2009-Mar-18 23:08:33 LOG3    send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin
2009-Mar-18 23:08:33 LOG3    send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin
2009-Mar-18 23:08:33 LOG3    send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin
2009-Mar-18 23:08:33 LOG2    take_cal: Calling 'take_cal hcorcal 5 0'
2009-Mar-18 23:08:33 START   begin_task: Starting task 'WAPP calibration'
2009-Mar-18 23:08:33 LOG5    begin_task: Level: (3)    ID = <10210>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:33 LOG4    send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration}    INFO {Making WAPP calibration ...}
2009-Mar-18 23:08:33 START   begin_task: Starting task 'selecting calibration type'
2009-Mar-18 23:08:33 LOG5    begin_task: Level: (4)    ID = <10211>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:33 LOG3    vw_send: To DATATAKING: setcal hcorcal
2009-Mar-18 23:08:34 LOG2    socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE'
2009-Mar-18 23:08:34 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 23:08:34 START   begin_task: Starting task 'waiting on setcal'
2009-Mar-18 23:08:34 LOG5    begin_task: Level: (5)    ID = <10212>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:34 LOG4    WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin'
2009-Mar-18 23:08:34 LOG4    got_cormsg: From DATATAKING: setcal hcorcal
2009-Mar-18 23:08:34 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 23:08:34 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:08:34 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-18 23:08:34 STOP    end_task: Finishing task 'waiting on setcal' with status 'OK'
2009-Mar-18 23:08:34 LOG5    end_task: Level: (5)    ID = <10212>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:34 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'setcal'
2009-Mar-18 23:08:34 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-18 23:08:34 LOG3    socket_wait: To ALFAMON: CAL HI
2009-Mar-18 23:08:34 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-18 23:08:34 LOG5    begin_task: Level: (5)    ID = <10213>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:34 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:08:34 NOTE    WAPPDATA-new_file: New FITS file: wapp.20090318.a2048.0003.fits
2009-Mar-18 23:08:34 LOG4    send_obs_status: To obs_status: <0> FILENAME {wapp.20090318.a2048.0003.fits}
2009-Mar-18 23:08:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 23:08:35 LOG4    check_wapp_levels: WAPP-1 power levels:    1.043  0.971    0.941  0.909
2009-Mar-18 23:08:35 LOG4    check_wapp_levels: WAPP-2 power levels:    0.896  1.044    0.943  0.916
2009-Mar-18 23:08:35 LOG4    check_wapp_levels: WAPP-3 power levels:    0.940  1.004    1.114  0.984
2009-Mar-18 23:08:35 LOG4    check_wapp_levels: WAPP-4 power levels:    0.960  0.109    1.060  0.120
2009-Mar-18 23:08:35 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-18 23:08:35 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-18 23:08:35 LOG5    end_task: Level: (5)    ID = <10213>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:35 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-18 23:08:35 LOG3    to_alfamon: To ALFAMON: CAL HI
2009-Mar-18 23:08:35 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-18 23:08:35 LOG3    socket_wait: To ALFAMON: NOISE ACTIVE
2009-Mar-18 23:08:35 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-18 23:08:35 LOG5    begin_task: Level: (5)    ID = <10214>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:35 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-18 23:08:35 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-18 23:08:35 LOG5    end_task: Level: (5)    ID = <10214>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:35 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-18 23:08:35 LOG3    to_alfamon: To ALFAMON: NOISE ACTIVE
2009-Mar-18 23:08:35 STOP    end_task: Finishing task 'selecting calibration type' with status 'OK'
2009-Mar-18 23:08:35 LOG5    end_task: Level: (4)    ID = <10211>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:35 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...}
2009-Mar-18 23:08:35 LOG3    wapp_calcontrol: To CALCONTROL: CALON
2009-Mar-18 23:08:35 LOG3    sock_errsend: To CALCONTROL: CALON STATUS
2009-Mar-18 23:08:35 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-18 23:08:35 LOG5    begin_task: Level: (4)    ID = <10215>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:35 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-18 23:08:35 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x03
2009-Mar-18 23:08:35 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-18 23:08:35 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-18 23:08:35 LOG5    end_task: Level: (4)    ID = <10215>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:35 LOG4    send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...}
2009-Mar-18 23:08:35 LOG4    take_data: Calling 'take_data 5 5 CAL ON -'
2009-Mar-18 23:08:35 START   begin_task: Starting task 'WAPP spectral observation'
2009-Mar-18 23:08:35 LOG5    begin_task: Level: (4)    ID = <10216>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:35 LOG5    log_alfabeam: Parameters: 9.8679444444444471 23.006722222222226 10.479627 2009.2134546036455 78.399986
2009-Mar-18 23:08:35 LOG4    log_alfabeam: ALFABEAM 0   9.867944444444451  23.006722222222248
2009-Mar-18 23:08:35 LOG4    log_alfabeam: ALFABEAM 1   9.870310638749736  22.914064443992139
2009-Mar-18 23:08:35 LOG4    log_alfabeam: ALFABEAM 2   9.875289266399074  22.975641075155117
2009-Mar-18 23:08:35 LOG4    log_alfabeam: ALFABEAM 3   9.872977550707052  23.068392509770501
2009-Mar-18 23:08:35 LOG4    log_alfabeam: ALFABEAM 4   9.865638666527291  23.100042889208513
2009-Mar-18 23:08:35 LOG4    log_alfabeam: ALFABEAM 5   9.860585568576703  23.037359066801049
2009-Mar-18 23:08:35 LOG4    log_alfabeam: ALFABEAM 6   9.862946252718118  22.944131021151026
2009-Mar-18 23:08:35 INFO2   take_data: Starting WAPP scan: 907700193
2009-Mar-18 23:08:36 LOG4    send_obs_status: To obs_status: <0> TASKTIME 5
2009-Mar-18 23:08:36 START   begin_task: Starting task 'waiting on WAPP spectra'
2009-Mar-18 23:08:36 LOG5    begin_task: Level: (5)    ID = <10217>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:36 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 23:08:36 INFO1   WAPP=1+2+3+4-start_spectra: start sec 11317.00
2009-Mar-18 23:08:42 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.165104 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 23:08:42 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.165104 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 23:08:42 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.165104 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 23:08:42 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.571 (still bad)
2009-Mar-18 23:08:42 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.165104 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 23:08:42 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.165104 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 23:08:42 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.165104 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 23:08:42 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.165104 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 23:08:42 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.165104 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 23:08:42 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.165104 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 23:08:42 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 23:08:42 STOP    end_task: Finishing task 'waiting on WAPP spectra' with status 'OK'
2009-Mar-18 23:08:42 LOG5    end_task: Level: (5)    ID = <10217>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:42 STOP    end_task: Finishing task 'WAPP spectral observation' with status 'OK'
2009-Mar-18 23:08:42 LOG5    end_task: Level: (4)    ID = <10216>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:42 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...}
2009-Mar-18 23:08:42 LOG3    wapp_calcontrol: To CALCONTROL: CALOFF
2009-Mar-18 23:08:42 LOG3    sock_errsend: To CALCONTROL: CALOFF STATUS
2009-Mar-18 23:08:42 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-18 23:08:42 LOG5    begin_task: Level: (4)    ID = <10218>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:43 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-18 23:08:43 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x02
2009-Mar-18 23:08:43 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-18 23:08:43 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-18 23:08:43 LOG5    end_task: Level: (4)    ID = <10218>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:43 LOG4    send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...}
2009-Mar-18 23:08:43 LOG4    take_data: Calling 'take_data 5 5 CAL OFF -'
2009-Mar-18 23:08:43 START   begin_task: Starting task 'WAPP spectral observation'
2009-Mar-18 23:08:43 LOG5    begin_task: Level: (4)    ID = <10219>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:43 LOG5    log_alfabeam: Parameters: 9.8679444444444471 23.006722222222226 10.481577 2009.2134548254621 78.399986
2009-Mar-18 23:08:43 LOG4    log_alfabeam: ALFABEAM 0   9.867944444444451  23.006722222222237
2009-Mar-18 23:08:43 LOG4    log_alfabeam: ALFABEAM 1   9.870320276349705  22.914111032439532
2009-Mar-18 23:08:43 LOG4    log_alfabeam: ALFABEAM 2   9.875292538140430  22.975788548400359
2009-Mar-18 23:08:43 LOG4    log_alfabeam: ALFABEAM 3   9.872971032877633  23.068494284427956
2009-Mar-18 23:08:43 LOG4    log_alfabeam: ALFABEAM 4   9.865628785507267  23.099995805749664
2009-Mar-18 23:08:43 LOG4    log_alfabeam: ALFABEAM 5   9.860582377037531  23.037212246137887
2009-Mar-18 23:08:43 LOG4    log_alfabeam: ALFABEAM 6   9.862952787856468  22.944032188925611
2009-Mar-18 23:08:43 INFO2   take_data: Starting WAPP scan: 907700194
2009-Mar-18 23:08:43 LOG4    send_obs_status: To obs_status: <0> TASKTIME 5
2009-Mar-18 23:08:43 START   begin_task: Starting task 'waiting on WAPP spectra'
2009-Mar-18 23:08:43 LOG5    begin_task: Level: (5)    ID = <10220>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:43 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 23:08:43 INFO1   WAPP=1+2+3+4-start_spectra: start sec 11324.00
2009-Mar-18 23:08:48 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.571 (still bad)
2009-Mar-18 23:08:49 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.165104 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 23:08:49 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.165104 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 23:08:49 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.165104 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 23:08:49 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.165104 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 23:08:49 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.165104 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 23:08:49 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.165104 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 23:08:49 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.165104 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 23:08:49 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.165104 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 23:08:49 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.165104 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 23:08:49 INFO1   WAPP=1+2+3+4-start_spectra: Skipping Tsys
2009-Mar-18 23:08:49 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 23:08:49 STOP    end_task: Finishing task 'waiting on WAPP spectra' with status 'OK'
2009-Mar-18 23:08:49 LOG5    end_task: Level: (5)    ID = <10220>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:49 STOP    end_task: Finishing task 'WAPP spectral observation' with status 'OK'
2009-Mar-18 23:08:49 LOG5    end_task: Level: (4)    ID = <10219>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:49 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_busy
2009-Mar-18 23:08:49 STOP    finish_task: Finishing task 'WAPP calibration'
2009-Mar-18 23:08:49 LOG5    finish_task: Level: (3)    ID = <10210>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:49 INFO2   finish_task: DONE finished calibration: WAPP calibration
2009-Mar-18 23:08:49 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 23:08:49 STOP    end_task: Finishing task 'WAPP calibration' with status 'OK'
2009-Mar-18 23:08:49 LOG5    end_task: Level: (3)    ID = <10210>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:50 LOG4    send_obs_status: To obs_status: <1> INFO {Returning to drift position}
2009-Mar-18 23:08:50 INFO4   fixed_driftmap: Sending telescope back to drift position Az = 120.23 and ZA = 9.60
2009-Mar-18 23:08:50 LOG3    track_source: Calling 'track_source AGES3193_p2_036 120.23 9.5962938186 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)'
2009-Mar-18 23:08:50 START   begin_task: Starting task 'sending tracking commands'
2009-Mar-18 23:08:50 LOG5    begin_task: Level: (3)    ID = <10221>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:50 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_036}    INFO {Slewing to source 'AGES3193_p2_036' ...}
2009-Mar-18 23:08:50 INFO1   track_source: Starting to track AGES3193_p2_036
2009-Mar-18 23:08:50 LOG3    vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_036"
2009-Mar-18 23:08:50 LOG3    vw_send: To DATATAKING: set ra 120.23
2009-Mar-18 23:08:50 LOG3    vw_send: To DATATAKING: set dec 9.5962938186
2009-Mar-18 23:08:50 LOG3    vw_send: To DATATAKING: pnt tr send
2009-Mar-18 23:08:50 LOG3    vw_send: To DATATAKING: pnt tr 120.23 9.5962938186 -CF
2009-Mar-18 23:08:50 LOG3    vw_send: To DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 23:08:50 STOP    finish_task: Finishing task 'sending tracking commands'
2009-Mar-18 23:08:50 LOG5    finish_task: Level: (3)    ID = <10221>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:50 INFO2   finish_task: DONE finished sending: tracking commands
2009-Mar-18 23:08:50 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 23:08:50 STOP    end_task: Finishing task 'sending tracking commands' with status 'OK'
2009-Mar-18 23:08:50 LOG5    end_task: Level: (3)    ID = <10221>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:50 LOG1    fixed_driftmap: Parameters: HA = +00:36:00.0  Start = 10:29:33.3  LST = 10:29:00.7  diff = 32.6 secs
2009-Mar-18 23:08:50 INFO2   fixed_driftmap: Waiting 30.6 seconds for RA 9:53:33
2009-Mar-18 23:08:50 INFO2   lstwait: Waiting for 30.5 secs from LST 10:29:01 to LST 10:29:31 ...
2009-Mar-18 23:08:50 LOG4    send_obs_status: To obs_status: <1> TASKTIME 30.511957539138642 BITMAP stat_wait MESSAGE {Waiting ...}
2009-Mar-18 23:08:50 START   begin_task: Starting task 'waiting on wait on LST'
2009-Mar-18 23:08:50 LOG5    begin_task: Level: (3)    ID = <10222>    Status = 0 0 0 0  ok
2009-Mar-18 23:08:50 LOG4    got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_036"
2009-Mar-18 23:08:50 LOG4    got_cormsg: From DATATAKING: set ra 120.23
2009-Mar-18 23:08:50 LOG4    got_cormsg: From DATATAKING: set dec 9.5962938186
2009-Mar-18 23:08:50 LOG4    got_cormsg: From DATATAKING: vw% 120.23
2009-Mar-18 23:08:50 LOG4    got_cormsg: From DATATAKING: vw% 9.5962938186
2009-Mar-18 23:08:50 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:08:50 LOG4    got_cormsg: From DATATAKING: pnt tr send
2009-Mar-18 23:08:50 LOG4    got_cormsg: From DATATAKING: pnt tr 120.23 9.5962938186 -CF
2009-Mar-18 23:08:50 LOG4    got_cormsg: From DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 23:08:50 LOG4    got_cormsg: From DATATAKING: vw% vw%
2009-Mar-18 23:08:50 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:08:54 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 23:09:20 STOP    end_task: Finishing task 'waiting on wait on LST' with status 'OK'
2009-Mar-18 23:09:20 LOG5    end_task: Level: (3)    ID = <10222>    Status = 0 0 0 0  ok
2009-Mar-18 23:09:20 LOG4    lstwait: Finished waiting 0.49 seconds late
2009-Mar-18 23:09:20 INFO3   lstwait: Finished waiting
2009-Mar-18 23:09:20 LOG4    send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy
2009-Mar-18 23:09:20 INFO2   fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1
2009-Mar-18 23:09:20 LOG4    send_obs_status: To obs_status: <1> LOOP 1
2009-Mar-18 23:09:20 LOG4    send_obs_status: To obs_status: <1> INFO {Making drift scan}
2009-Mar-18 23:09:21 LOG4    send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...}
2009-Mar-18 23:09:21 LOG4    take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -'
2009-Mar-18 23:09:21 START   begin_task: Starting task 'WAPP spectral observation'
2009-Mar-18 23:09:21 LOG5    begin_task: Level: (3)    ID = <10223>    Status = 0 0 0 0  ok
2009-Mar-18 23:09:21 LOG5    log_alfabeam: Can't log alfabeam, not J2000
2009-Mar-18 23:09:21 INFO2   take_data: Starting WAPP scan: 907700195
2009-Mar-18 23:09:21 LOG4    send_obs_status: To obs_status: <0> TASKTIME 1200
2009-Mar-18 23:09:21 START   begin_task: Starting task 'waiting on WAPP spectra'
2009-Mar-18 23:09:21 LOG5    begin_task: Level: (4)    ID = <10224>    Status = 0 0 0 0  ok
2009-Mar-18 23:09:21 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 23:09:21 INFO1   WAPP=1+2+3+4-start_spectra: start sec 11362.00
2009-Mar-18 23:09:23 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.165104 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 23:09:23 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.165104 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 23:09:23 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.165104 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 23:09:23 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.165104 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 23:09:23 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.165104 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 23:09:23 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.165104 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 23:09:23 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.165104 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 23:09:23 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.165104 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 23:09:23 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.165104 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 23:09:23 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 23:09:24 LOG3    WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964  diff = 2)!
2009-Mar-18 23:09:25 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad)
2009-Mar-18 23:09:27 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad)
2009-Mar-18 23:09:29 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad)
2009-Mar-18 23:09:31 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad)
2009-Mar-18 23:09:33 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad)
2009-Mar-18 23:09:35 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 23:09:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 23:09:37 LOG4    check_wapp_levels: WAPP-1 power levels:    1.043  0.973    0.943  0.912
2009-Mar-18 23:09:37 LOG4    check_wapp_levels: WAPP-2 power levels:    0.899  1.046    0.946  0.916
2009-Mar-18 23:09:37 LOG4    check_wapp_levels: WAPP-3 power levels:    0.939  1.003    1.117  0.984
2009-Mar-18 23:09:37 LOG4    check_wapp_levels: WAPP-4 power levels:    0.959  0.109    1.059  0.120
2009-Mar-18 23:09:39 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad)
2009-Mar-18 23:09:41 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad)
2009-Mar-18 23:09:43 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad)
2009-Mar-18 23:09:45 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad)
2009-Mar-18 23:09:48 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad)
2009-Mar-18 23:09:49 LOG3    WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964  diff = 2)!
2009-Mar-18 23:09:50 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad)
2009-Mar-18 23:09:52 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad)
2009-Mar-18 23:09:54 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad)
2009-Mar-18 23:09:56 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad)
2009-Mar-18 23:09:58 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 23:10:00 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad)
2009-Mar-18 23:10:02 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad)
2009-Mar-18 23:10:04 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad)
2009-Mar-18 23:10:06 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad)
2009-Mar-18 23:10:08 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad)
2009-Mar-18 23:10:10 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 23:10:12 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad)
2009-Mar-18 23:10:14 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad)
2009-Mar-18 23:10:16 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 23:10:18 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 23:10:20 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad)
2009-Mar-18 23:10:22 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad)
2009-Mar-18 23:10:24 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 23:10:26 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad)
2009-Mar-18 23:10:28 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad)
2009-Mar-18 23:10:30 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad)
2009-Mar-18 23:10:32 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad)
2009-Mar-18 23:10:34 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad)
2009-Mar-18 23:10:36 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad)
2009-Mar-18 23:10:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 23:10:38 LOG4    check_wapp_levels: WAPP-1 power levels:    1.050  0.981    0.948  0.916
2009-Mar-18 23:10:38 LOG4    check_wapp_levels: WAPP-2 power levels:    0.904  1.049    0.951  0.921
2009-Mar-18 23:10:38 LOG4    check_wapp_levels: WAPP-3 power levels:    0.969  1.034    1.125  0.988
2009-Mar-18 23:10:38 LOG4    check_wapp_levels: WAPP-4 power levels:    0.966  0.109    1.065  0.120
2009-Mar-18 23:10:40 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad)
2009-Mar-18 23:10:42 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad)
2009-Mar-18 23:10:44 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad)
2009-Mar-18 23:10:46 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad)
2009-Mar-18 23:10:48 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad)
2009-Mar-18 23:10:50 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad)
2009-Mar-18 23:10:52 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad)
2009-Mar-18 23:10:54 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad)
2009-Mar-18 23:10:56 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad)
2009-Mar-18 23:10:58 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad)
2009-Mar-18 23:11:00 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad)
2009-Mar-18 23:11:02 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad)
2009-Mar-18 23:11:04 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad)
2009-Mar-18 23:11:06 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad)
2009-Mar-18 23:11:09 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad)
2009-Mar-18 23:11:11 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad)
2009-Mar-18 23:11:13 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad)
2009-Mar-18 23:11:15 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad)
2009-Mar-18 23:11:17 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad)
2009-Mar-18 23:11:19 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad)
2009-Mar-18 23:11:21 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad)
2009-Mar-18 23:11:23 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad)
2009-Mar-18 23:11:25 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad)
2009-Mar-18 23:11:27 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad)
2009-Mar-18 23:11:29 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:11:31 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:11:33 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad)
2009-Mar-18 23:11:35 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.122 (still bad)
2009-Mar-18 23:11:37 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad)
2009-Mar-18 23:11:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-18 23:11:39 LOG4    check_wapp_levels: WAPP-1 power levels:    1.047  0.976    0.945  0.911
2009-Mar-18 23:11:39 LOG4    check_wapp_levels: WAPP-2 power levels:    0.905  1.052    0.947  0.920
2009-Mar-18 23:11:39 LOG4    check_wapp_levels: WAPP-3 power levels:    0.942  1.007    1.130  0.994
2009-Mar-18 23:11:39 LOG4    check_wapp_levels: WAPP-4 power levels:    0.963  0.110    1.063  0.120
2009-Mar-18 23:11:41 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad)
2009-Mar-18 23:11:43 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad)
2009-Mar-18 23:11:45 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad)
2009-Mar-18 23:11:47 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad)
2009-Mar-18 23:11:49 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad)
2009-Mar-18 23:11:51 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad)
2009-Mar-18 23:11:53 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:11:55 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 23:11:57 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad)
2009-Mar-18 23:11:59 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad)
2009-Mar-18 23:12:01 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:12:03 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:12:05 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 23:12:07 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad)
2009-Mar-18 23:12:09 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad)
2009-Mar-18 23:12:11 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 23:12:13 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad)
2009-Mar-18 23:12:15 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad)
2009-Mar-18 23:12:17 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 23:12:19 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad)
2009-Mar-18 23:12:21 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad)
2009-Mar-18 23:12:23 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 23:12:25 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 23:12:27 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad)
2009-Mar-18 23:12:29 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 23:12:31 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 23:12:33 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:12:35 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 23:12:38 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad)
2009-Mar-18 23:12:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-18 23:12:40 LOG4    check_wapp_levels: WAPP-1 power levels:    1.049  0.980    0.947  0.917
2009-Mar-18 23:12:40 LOG4    check_wapp_levels: WAPP-2 power levels:    0.904  1.053    0.953  0.924
2009-Mar-18 23:12:40 LOG4    check_wapp_levels: WAPP-3 power levels:    0.941  1.009    1.122  0.984
2009-Mar-18 23:12:40 LOG4    check_wapp_levels: WAPP-4 power levels:    0.963  0.110    1.063  0.121
2009-Mar-18 23:12:42 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:12:44 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 23:12:46 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad)
2009-Mar-18 23:12:48 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad)
2009-Mar-18 23:12:50 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad)
2009-Mar-18 23:12:52 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad)
2009-Mar-18 23:12:54 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:12:56 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:12:58 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad)
2009-Mar-18 23:13:00 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:13:02 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.121 (still bad)
2009-Mar-18 23:13:04 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad)
2009-Mar-18 23:13:06 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad)
2009-Mar-18 23:13:08 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:13:10 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:13:12 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 23:13:14 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad)
2009-Mar-18 23:13:16 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:13:18 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 23:13:20 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:13:22 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:13:24 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad)
2009-Mar-18 23:13:26 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad)
2009-Mar-18 23:13:28 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:13:30 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 23:13:32 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:13:34 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:13:36 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 23:13:38 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:13:40 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:13:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-18 23:13:42 LOG4    check_wapp_levels: WAPP-1 power levels:    1.041  0.973    0.944  0.912
2009-Mar-18 23:13:42 LOG4    check_wapp_levels: WAPP-2 power levels:    0.901  1.048    0.944  0.915
2009-Mar-18 23:13:42 LOG4    check_wapp_levels: WAPP-3 power levels:    0.941  1.009    1.116  0.981
2009-Mar-18 23:13:42 LOG4    check_wapp_levels: WAPP-4 power levels:    0.958  0.110    1.057  0.120
2009-Mar-18 23:13:44 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:13:46 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:13:48 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:13:50 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:13:52 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad)
2009-Mar-18 23:13:54 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad)
2009-Mar-18 23:13:56 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad)
2009-Mar-18 23:13:58 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad)
2009-Mar-18 23:14:01 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 23:14:03 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:14:05 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:14:07 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 23:14:09 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:14:11 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:14:13 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:14:15 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:14:17 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:14:19 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:14:21 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:14:23 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 23:14:25 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:14:27 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:14:29 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:14:31 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:14:33 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:14:35 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:14:37 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 23:14:39 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.118 (still bad)
2009-Mar-18 23:14:41 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:14:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 23:14:43 LOG4    check_wapp_levels: WAPP-1 power levels:    1.045  0.974    0.945  0.913
2009-Mar-18 23:14:43 LOG4    check_wapp_levels: WAPP-2 power levels:    0.900  1.046    0.944  0.913
2009-Mar-18 23:14:43 LOG4    check_wapp_levels: WAPP-3 power levels:    0.936  1.003    1.116  0.981
2009-Mar-18 23:14:43 LOG4    check_wapp_levels: WAPP-4 power levels:    0.959  0.109    1.058  0.120
2009-Mar-18 23:14:45 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 23:14:47 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 23:14:49 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 23:14:51 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad)
2009-Mar-18 23:14:53 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:14:55 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:14:57 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:14:59 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:15:01 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:15:03 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad)
2009-Mar-18 23:15:05 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:15:07 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:15:09 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:15:11 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:15:13 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:15:15 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad)
2009-Mar-18 23:15:17 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 23:15:19 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:15:21 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:15:23 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:15:26 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:15:28 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:15:30 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:15:32 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:15:34 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.119 (still bad)
2009-Mar-18 23:15:36 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:15:38 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:15:40 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:15:42 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:15:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-18 23:15:44 LOG4    check_wapp_levels: WAPP-1 power levels:    1.046  0.974    0.941  0.912
2009-Mar-18 23:15:44 LOG4    check_wapp_levels: WAPP-2 power levels:    0.900  1.048    0.944  0.912
2009-Mar-18 23:15:44 LOG4    check_wapp_levels: WAPP-3 power levels:    0.938  1.003    1.117  0.980
2009-Mar-18 23:15:44 LOG4    check_wapp_levels: WAPP-4 power levels:    0.957  0.110    1.057  0.121
2009-Mar-18 23:15:46 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:15:48 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:15:50 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:15:52 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:15:54 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:15:56 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 23:15:58 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:16:00 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:16:02 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:16:04 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad)
2009-Mar-18 23:16:06 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:16:08 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:16:10 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:16:12 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 23:16:14 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:16:16 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:16:18 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:16:20 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:16:22 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:16:24 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:16:26 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:16:28 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:16:30 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:16:32 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:16:34 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:16:36 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:16:38 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:16:40 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:16:42 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:16:44 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:16:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-18 23:16:46 LOG4    check_wapp_levels: WAPP-1 power levels:    1.045  0.974    0.944  0.913
2009-Mar-18 23:16:46 LOG4    check_wapp_levels: WAPP-2 power levels:    0.902  1.050    0.948  0.917
2009-Mar-18 23:16:46 LOG4    check_wapp_levels: WAPP-3 power levels:    0.939  1.006    1.117  0.984
2009-Mar-18 23:16:46 LOG4    check_wapp_levels: WAPP-4 power levels:    0.960  0.110    1.061  0.120
2009-Mar-18 23:16:48 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:16:51 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:16:53 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad)
2009-Mar-18 23:16:55 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:16:57 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:16:59 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad)
2009-Mar-18 23:17:01 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:17:03 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:17:05 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:17:07 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:17:09 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:17:11 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:17:13 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:17:15 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:17:17 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:17:19 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:17:21 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad)
2009-Mar-18 23:17:23 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:17:25 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:17:27 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:17:29 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:17:31 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:17:33 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:17:35 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:17:37 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:17:39 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad)
2009-Mar-18 23:17:41 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad)
2009-Mar-18 23:17:43 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad)
2009-Mar-18 23:17:45 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad)
2009-Mar-18 23:17:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-18 23:17:47 LOG4    check_wapp_levels: WAPP-1 power levels:    1.047  0.974    0.941  0.910
2009-Mar-18 23:17:47 LOG4    check_wapp_levels: WAPP-2 power levels:    0.902  1.051    0.948  0.916
2009-Mar-18 23:17:47 LOG4    check_wapp_levels: WAPP-3 power levels:    0.940  1.002    1.128  0.994
2009-Mar-18 23:17:47 LOG4    check_wapp_levels: WAPP-4 power levels:    0.960  0.110    1.059  0.121
2009-Mar-18 23:17:49 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad)
2009-Mar-18 23:17:51 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad)
2009-Mar-18 23:17:53 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad)
2009-Mar-18 23:17:55 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:17:57 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad)
2009-Mar-18 23:17:59 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad)
2009-Mar-18 23:18:01 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:18:03 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:18:05 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad)
2009-Mar-18 23:18:07 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:18:09 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:18:11 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:18:14 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:18:16 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad)
2009-Mar-18 23:18:18 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:18:20 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:18:22 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:18:24 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:18:26 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:18:28 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad)
2009-Mar-18 23:18:30 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:18:32 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:18:34 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad)
2009-Mar-18 23:18:36 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:18:38 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:18:40 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad)
2009-Mar-18 23:18:42 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad)
2009-Mar-18 23:18:44 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad)
2009-Mar-18 23:18:46 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad)
2009-Mar-18 23:18:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-18 23:18:48 LOG4    check_wapp_levels: WAPP-1 power levels:    1.047  0.973    0.943  0.912
2009-Mar-18 23:18:48 LOG4    check_wapp_levels: WAPP-2 power levels:    0.922  1.075    0.946  0.918
2009-Mar-18 23:18:48 LOG4    check_wapp_levels: WAPP-3 power levels:    0.938  1.005    1.122  0.992
2009-Mar-18 23:18:48 LOG4    check_wapp_levels: WAPP-4 power levels:    0.960  0.110    1.060  0.121
2009-Mar-18 23:18:50 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad)
2009-Mar-18 23:18:52 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad)
2009-Mar-18 23:18:54 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:18:56 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:18:58 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad)
2009-Mar-18 23:19:00 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:19:02 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:19:04 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad)
2009-Mar-18 23:19:06 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:19:08 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:19:10 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad)
2009-Mar-18 23:19:12 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:19:14 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:19:16 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad)
2009-Mar-18 23:19:18 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:19:20 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:19:22 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:19:24 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:19:26 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:19:28 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad)
2009-Mar-18 23:19:30 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:19:32 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad)
2009-Mar-18 23:19:34 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:19:36 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:19:39 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad)
2009-Mar-18 23:19:41 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad)
2009-Mar-18 23:19:43 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:19:45 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:19:47 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:19:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-18 23:19:49 LOG4    check_wapp_levels: WAPP-1 power levels:    1.046  0.971    0.950  0.917
2009-Mar-18 23:19:49 LOG4    check_wapp_levels: WAPP-2 power levels:    0.903  1.054    0.947  0.915
2009-Mar-18 23:19:49 LOG4    check_wapp_levels: WAPP-3 power levels:    0.940  1.004    1.118  0.983
2009-Mar-18 23:19:49 LOG4    check_wapp_levels: WAPP-4 power levels:    0.961  0.110    1.062  0.121
2009-Mar-18 23:19:51 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad)
2009-Mar-18 23:19:53 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad)
2009-Mar-18 23:19:55 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad)
2009-Mar-18 23:19:57 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:19:59 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:20:01 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:20:03 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:20:05 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:20:07 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:20:09 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:20:11 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:20:13 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:20:15 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:20:17 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:20:19 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:20:21 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:20:23 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:20:25 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:20:27 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:20:29 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:20:31 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:20:33 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:20:35 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:20:37 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:20:39 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:20:41 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:20:43 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:20:45 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:20:47 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:20:49 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:20:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-18 23:20:51 LOG4    check_wapp_levels: WAPP-1 power levels:    1.044  0.976    0.944  0.913
2009-Mar-18 23:20:51 LOG4    check_wapp_levels: WAPP-2 power levels:    0.903  1.052    0.947  0.917
2009-Mar-18 23:20:51 LOG4    check_wapp_levels: WAPP-3 power levels:    0.940  1.006    1.117  0.983
2009-Mar-18 23:20:51 LOG4    check_wapp_levels: WAPP-4 power levels:    0.972  0.110    1.072  0.121
2009-Mar-18 23:20:53 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:20:55 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:20:57 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:21:00 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:21:02 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:21:04 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:21:06 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad)
2009-Mar-18 23:21:08 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:21:10 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:21:12 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:21:14 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:21:16 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad)
2009-Mar-18 23:21:18 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:21:20 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:21:22 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:21:24 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad)
2009-Mar-18 23:21:26 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:21:28 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad)
2009-Mar-18 23:21:30 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:21:32 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:21:34 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:21:36 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:21:38 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:21:40 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad)
2009-Mar-18 23:21:42 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:21:44 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:21:46 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:21:48 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:21:50 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:21:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-18 23:21:52 LOG4    check_wapp_levels: WAPP-1 power levels:    1.048  0.978    0.951  0.919
2009-Mar-18 23:21:52 LOG4    check_wapp_levels: WAPP-2 power levels:    0.907  1.058    0.954  0.923
2009-Mar-18 23:21:52 LOG4    check_wapp_levels: WAPP-3 power levels:    0.946  1.013    1.124  0.987
2009-Mar-18 23:21:52 LOG4    check_wapp_levels: WAPP-4 power levels:    0.966  0.110    1.066  0.121
2009-Mar-18 23:21:54 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:21:56 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:21:58 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:22:00 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:22:02 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:22:04 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad)
2009-Mar-18 23:22:06 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:22:08 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:22:10 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:22:12 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:22:14 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:22:16 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:22:18 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:22:20 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:22:22 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:22:24 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:22:26 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:22:29 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad)
2009-Mar-18 23:22:31 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad)
2009-Mar-18 23:22:33 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:22:35 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad)
2009-Mar-18 23:22:37 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:22:39 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:22:41 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad)
2009-Mar-18 23:22:43 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:22:45 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:22:47 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:22:49 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:22:51 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:22:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-18 23:22:53 LOG4    check_wapp_levels: WAPP-1 power levels:    1.044  0.975    0.946  0.915
2009-Mar-18 23:22:53 LOG4    check_wapp_levels: WAPP-2 power levels:    0.905  1.056    0.952  0.921
2009-Mar-18 23:22:53 LOG4    check_wapp_levels: WAPP-3 power levels:    0.945  1.010    1.118  0.982
2009-Mar-18 23:22:53 LOG4    check_wapp_levels: WAPP-4 power levels:    0.964  0.110    1.064  0.121
2009-Mar-18 23:22:55 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad)
2009-Mar-18 23:22:57 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:22:59 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:23:01 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:23:03 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:23:05 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:23:07 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:23:09 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:23:11 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:23:13 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:23:15 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:23:17 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad)
2009-Mar-18 23:23:19 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad)
2009-Mar-18 23:23:21 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:23:23 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:23:25 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:23:27 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:23:29 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad)
2009-Mar-18 23:23:31 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:23:33 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:23:35 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:23:37 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:23:39 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:23:41 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:23:43 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 23:23:45 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad)
2009-Mar-18 23:23:47 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:23:50 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:23:52 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad)
2009-Mar-18 23:23:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-18 23:23:54 LOG4    check_wapp_levels: WAPP-1 power levels:    1.051  0.982    0.947  0.916
2009-Mar-18 23:23:54 LOG4    check_wapp_levels: WAPP-2 power levels:    0.905  1.054    0.952  0.919
2009-Mar-18 23:23:54 LOG4    check_wapp_levels: WAPP-3 power levels:    0.945  1.011    1.125  0.984
2009-Mar-18 23:23:54 LOG4    check_wapp_levels: WAPP-4 power levels:    0.972  0.110    1.072  0.121
2009-Mar-18 23:23:56 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:23:58 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:24:00 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:24:02 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad)
2009-Mar-18 23:24:04 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:24:06 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad)
2009-Mar-18 23:24:08 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:24:10 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:24:12 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:24:14 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:24:16 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:24:18 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad)
2009-Mar-18 23:24:20 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:24:22 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:24:24 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:24:26 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:24:28 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:24:30 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:24:32 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad)
2009-Mar-18 23:24:34 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:24:36 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:24:38 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:24:40 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:24:42 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad)
2009-Mar-18 23:24:44 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:24:46 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:24:48 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:24:50 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:24:52 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:24:54 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:24:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-18 23:24:56 LOG4    check_wapp_levels: WAPP-1 power levels:    1.043  0.976    0.941  0.909
2009-Mar-18 23:24:56 LOG4    check_wapp_levels: WAPP-2 power levels:    0.902  1.050    0.952  0.921
2009-Mar-18 23:24:56 LOG4    check_wapp_levels: WAPP-3 power levels:    0.942  1.005    1.114  0.980
2009-Mar-18 23:24:56 LOG4    check_wapp_levels: WAPP-4 power levels:    0.962  0.110    1.061  0.120
2009-Mar-18 23:24:58 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:25:00 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:25:02 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:25:04 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:25:06 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:25:08 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:25:10 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:25:12 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:25:15 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:25:17 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad)
2009-Mar-18 23:25:19 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad)
2009-Mar-18 23:25:21 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad)
2009-Mar-18 23:25:23 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad)
2009-Mar-18 23:25:25 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.144 (still bad)
2009-Mar-18 23:25:27 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.150 (still bad)
2009-Mar-18 23:25:29 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.152 (still bad)
2009-Mar-18 23:25:31 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.152 (still bad)
2009-Mar-18 23:25:33 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.147 (still bad)
2009-Mar-18 23:25:35 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad)
2009-Mar-18 23:25:37 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad)
2009-Mar-18 23:25:39 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad)
2009-Mar-18 23:25:41 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad)
2009-Mar-18 23:25:43 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:25:45 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:25:47 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad)
2009-Mar-18 23:25:49 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad)
2009-Mar-18 23:25:51 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad)
2009-Mar-18 23:25:53 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.123 (still bad)
2009-Mar-18 23:25:55 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad)
2009-Mar-18 23:25:56 LOG3    WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964  diff = 2)!
2009-Mar-18 23:25:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 23:25:57 LOG4    check_wapp_levels: WAPP-1 power levels:    1.037  0.970    0.941  0.907
2009-Mar-18 23:25:57 LOG4    check_wapp_levels: WAPP-2 power levels:    0.901  1.053    0.946  0.915
2009-Mar-18 23:25:57 LOG4    check_wapp_levels: WAPP-3 power levels:    0.945  1.009    1.123  0.980
2009-Mar-18 23:25:57 LOG4    check_wapp_levels: WAPP-4 power levels:    0.962  0.109    1.062  0.120
2009-Mar-18 23:25:59 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:26:01 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:26:03 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:26:05 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:26:07 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:26:09 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:26:11 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:26:13 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:26:15 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:26:17 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:26:19 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:26:21 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad)
2009-Mar-18 23:26:23 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad)
2009-Mar-18 23:26:25 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:26:27 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad)
2009-Mar-18 23:26:29 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-18 23:26:31 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:26:33 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:26:35 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:26:37 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad)
2009-Mar-18 23:26:39 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:26:42 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad)
2009-Mar-18 23:26:44 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:26:46 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad)
2009-Mar-18 23:26:48 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 23:26:50 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:26:52 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.112 (still bad)
2009-Mar-18 23:26:54 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:26:56 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad)
2009-Mar-18 23:26:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-18 23:26:58 LOG4    check_wapp_levels: WAPP-1 power levels:    1.038  0.969    0.955  0.920
2009-Mar-18 23:26:58 LOG4    check_wapp_levels: WAPP-2 power levels:    0.897  1.047    0.946  0.915
2009-Mar-18 23:26:58 LOG4    check_wapp_levels: WAPP-3 power levels:    0.946  1.014    1.112  0.976
2009-Mar-18 23:26:58 LOG4    check_wapp_levels: WAPP-4 power levels:    0.962  0.110    1.061  0.121
2009-Mar-18 23:27:00 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:27:02 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad)
2009-Mar-18 23:27:04 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:27:06 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:27:08 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad)
2009-Mar-18 23:27:10 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:27:12 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.115 (still bad)
2009-Mar-18 23:27:14 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad)
2009-Mar-18 23:27:16 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:27:18 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:27:20 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:27:22 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:27:24 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:27:26 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:27:28 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:27:30 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:27:32 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:27:34 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:27:36 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad)
2009-Mar-18 23:27:38 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad)
2009-Mar-18 23:27:40 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad)
2009-Mar-18 23:27:42 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:27:44 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:27:46 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad)
2009-Mar-18 23:27:48 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:27:50 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:27:52 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:27:54 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad)
2009-Mar-18 23:27:56 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad)
2009-Mar-18 23:27:58 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:28:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-18 23:28:00 LOG4    check_wapp_levels: WAPP-1 power levels:    1.038  0.967    0.941  0.907
2009-Mar-18 23:28:00 LOG4    check_wapp_levels: WAPP-2 power levels:    0.903  1.054    0.952  0.921
2009-Mar-18 23:28:00 LOG4    check_wapp_levels: WAPP-3 power levels:    0.943  1.006    1.113  0.973
2009-Mar-18 23:28:00 LOG4    check_wapp_levels: WAPP-4 power levels:    0.962  0.110    1.062  0.120
2009-Mar-18 23:28:02 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:28:05 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:28:07 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:28:09 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 23:28:11 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad)
2009-Mar-18 23:28:13 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 23:28:15 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad)
2009-Mar-18 23:28:17 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad)
2009-Mar-18 23:28:19 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad)
2009-Mar-18 23:28:21 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad)
2009-Mar-18 23:28:23 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-18 23:28:25 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad)
2009-Mar-18 23:28:27 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad)
2009-Mar-18 23:28:29 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-18 23:28:31 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad)
2009-Mar-18 23:28:33 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad)
2009-Mar-18 23:28:35 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:28:37 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad)
2009-Mar-18 23:28:39 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 23:28:41 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad)
2009-Mar-18 23:28:43 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 23:28:45 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 23:28:47 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-18 23:28:49 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 23:28:51 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad)
2009-Mar-18 23:28:53 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:28:55 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad)
2009-Mar-18 23:28:57 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad)
2009-Mar-18 23:28:59 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.114 (still bad)
2009-Mar-18 23:29:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 23:29:01 LOG4    check_wapp_levels: WAPP-1 power levels:    1.040  0.966    0.940  0.902
2009-Mar-18 23:29:01 LOG4    check_wapp_levels: WAPP-2 power levels:    0.894  1.045    0.943  0.911
2009-Mar-18 23:29:01 LOG4    check_wapp_levels: WAPP-3 power levels:    0.943  1.008    1.111  0.976
2009-Mar-18 23:29:01 LOG4    check_wapp_levels: WAPP-4 power levels:    0.977  0.109    1.077  0.120
2009-Mar-18 23:29:03 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.110 (still bad)
2009-Mar-18 23:29:05 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-18 23:29:07 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:29:09 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad)
2009-Mar-18 23:29:11 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-18 23:29:13 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad)
2009-Mar-18 23:29:15 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad)
2009-Mar-18 23:29:17 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-18 23:29:19 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad)
2009-Mar-18 23:29:21 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad)
2009-Mar-18 23:29:22 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 23:29:22 STOP    end_task: Finishing task 'waiting on WAPP spectra' with status 'OK'
2009-Mar-18 23:29:22 LOG5    end_task: Level: (4)    ID = <10224>    Status = 0 0 0 0  ok
2009-Mar-18 23:29:22 STOP    end_task: Finishing task 'WAPP spectral observation' with status 'OK'
2009-Mar-18 23:29:22 LOG5    end_task: Level: (3)    ID = <10223>    Status = 0 0 0 0  ok
2009-Mar-18 23:29:22 STOP    finish_task: Finishing task 'fixed azimuth drift map'
2009-Mar-18 23:29:22 LOG5    finish_task: Level: (2)    ID = <10190>    Status = 0 0 0 0  ok
2009-Mar-18 23:29:22 DONE    finish_task: DONE finished pattern: fixed azimuth drift map
2009-Mar-18 23:29:22 LOG4    send_obs_status: To obs_status: <1> ENDTASK Finished
2009-Mar-18 23:29:22 END     end_task: Finishing task 'fixed azimuth drift map' with status 'OK'
2009-Mar-18 23:29:22 LOG5    end_task: Level: (2)    ID = <10190>    Status = 0 0 0 0  ok
2009-Mar-18 23:29:22 COMMAND run_command_line: EXECUTING command 26: 'ENDIF'
2009-Mar-18 23:29:22 COMMAND run_command_line: EXECUTING command 29: 'IF LSTSLEW(AGES3193_p2_038) < 105232 THEN'
2009-Mar-18 23:29:23 INFO5   is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_038) < 105232
2009-Mar-18 23:29:23 INFO5   is_if_valid: Condition parsed as: 10.856964999999999 < 10.875555555555556
2009-Mar-18 23:29:23 COMMAND run_command_line: EXECUTING command 30: 'FIXEDDRIFT az=110.79 alfaangle=-88.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_038 ra=95300.00 dec=225730.00'
2009-Mar-18 23:29:23 LOG2    check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map'
2009-Mar-18 23:29:23 LOG4    exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok
2009-Mar-18 23:29:23 LOG1    fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 110.79 -88.9 hcorcal 5 tracking no first 1 AGES3193_p2_038 95300.00 225730.00 J 8500.0 Heliocentric velocity(optical)'
2009-Mar-18 23:29:23 BEGIN   begin_task: Starting task 'fixed azimuth drift map'
2009-Mar-18 23:29:23 LOG5    begin_task: Level: (2)    ID = <10225>    Status = 0 0 0 0  ok
2009-Mar-18 23:29:23 INFO4   begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_036'
2009-Mar-18 23:29:23 INFO1   fixed_driftmap: Starting pattern: Fixed azimuth drift map
2009-Mar-18 23:29:23 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1    INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_038}
2009-Mar-18 23:29:23 INFO3   fixed_driftmap: Sending telescope to Az = 110.79 and ZA = 14.53
2009-Mar-18 23:29:23 LOG3    track_source: Calling 'track_source AGES3193_p2_038 110.79 14.5305145738 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)'
2009-Mar-18 23:29:23 START   begin_task: Starting task 'sending tracking commands'
2009-Mar-18 23:29:23 LOG5    begin_task: Level: (3)    ID = <10226>    Status = 0 0 0 0  ok
2009-Mar-18 23:29:23 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_038}    INFO {Slewing to source 'AGES3193_p2_038' ...}
2009-Mar-18 23:29:23 INFO1   track_source: Starting to track AGES3193_p2_038
2009-Mar-18 23:29:23 LOG3    vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_038"
2009-Mar-18 23:29:23 LOG3    vw_send: To DATATAKING: set ra 110.79
2009-Mar-18 23:29:23 LOG3    vw_send: To DATATAKING: set dec 14.5305145738
2009-Mar-18 23:29:23 LOG3    vw_send: To DATATAKING: pnt tr send
2009-Mar-18 23:29:23 LOG3    vw_send: To DATATAKING: pnt tr 110.79 14.5305145738 -CF
2009-Mar-18 23:29:23 LOG3    vw_send: To DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 23:29:23 STOP    finish_task: Finishing task 'sending tracking commands'
2009-Mar-18 23:29:23 LOG5    finish_task: Level: (3)    ID = <10226>    Status = 0 0 0 0  ok
2009-Mar-18 23:29:23 INFO2   finish_task: DONE finished sending: tracking commands
2009-Mar-18 23:29:23 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 23:29:23 STOP    end_task: Finishing task 'sending tracking commands' with status 'OK'
2009-Mar-18 23:29:23 LOG5    end_task: Level: (3)    ID = <10226>    Status = 0 0 0 0  ok
2009-Mar-18 23:29:23 START   begin_task: Starting task 'rotate ALFA to -88.9 degrees'
2009-Mar-18 23:29:23 LOG5    begin_task: Level: (3)    ID = <10227>    Status = 0 0 0 0  ok
2009-Mar-18 23:29:23 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA}    INFO {Rotating ALFA to -88.9 degrees ...}
2009-Mar-18 23:29:23 INFO2   rotate_alfa: ALFA commanded to -88.9 degrees
2009-Mar-18 23:29:23 LOG3    sock_errsend: To ALFAMOTOR: POSITION -88.9 REPLY
2009-Mar-18 23:29:23 LOG4    send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...}
2009-Mar-18 23:29:23 START   begin_task: Starting task 'waiting on ALFA rotation'
2009-Mar-18 23:29:23 LOG5    begin_task: Level: (4)    ID = <10228>    Status = 0 0 0 0  ok
2009-Mar-18 23:29:23 LOG4    got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_038"
2009-Mar-18 23:29:23 LOG4    got_cormsg: From DATATAKING: set ra 110.79
2009-Mar-18 23:29:23 LOG4    got_cormsg: From DATATAKING: set dec 14.5305145738
2009-Mar-18 23:29:23 LOG4    got_cormsg: From DATATAKING: vw% 110.79
2009-Mar-18 23:29:23 LOG4    got_cormsg: From DATATAKING: vw% 14.5305145738
2009-Mar-18 23:29:23 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:29:23 LOG4    got_cormsg: From DATATAKING: pnt tr send
2009-Mar-18 23:29:23 LOG4    got_cormsg: From DATATAKING: pnt tr 110.79 14.5305145738 -CF
2009-Mar-18 23:29:23 LOG4    got_cormsg: From DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 23:29:23 LOG4    got_cormsg: From DATATAKING: vw% vw%
2009-Mar-18 23:29:23 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:29:24 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad)
2009-Mar-18 23:30:56 LOG4    exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION"
2009-Mar-18 23:30:56 INFO3   alfa_motor: ALFA rotator in-position -88.90 degrees
2009-Mar-18 23:30:56 STOP    end_task: Finishing task 'waiting on ALFA rotation' with status 'OK'
2009-Mar-18 23:30:56 LOG5    end_task: Level: (4)    ID = <10228>    Status = 0 0 0 0  ok
2009-Mar-18 23:30:56 LOG4    send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy
2009-Mar-18 23:30:56 STOP    finish_task: Finishing task 'rotate ALFA to -88.9 degrees'
2009-Mar-18 23:30:56 LOG5    finish_task: Level: (3)    ID = <10227>    Status = 0 0 0 0  ok
2009-Mar-18 23:30:56 INFO2   finish_task: DONE finished configuration: rotating ALFA to -88.9 degrees
2009-Mar-18 23:30:56 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 23:30:56 STOP    end_task: Finishing task 'rotate ALFA to -88.9 degrees' with status 'OK'
2009-Mar-18 23:30:56 LOG5    end_task: Level: (3)    ID = <10227>    Status = 0 0 0 0  ok
2009-Mar-18 23:30:56 START   begin_task: Starting task 'waiting on telescope'
2009-Mar-18 23:30:56 LOG5    begin_task: Level: (3)    ID = <10229>    Status = 0 0 0 0  ok
2009-Mar-18 23:30:56 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew    INFO {Waiting for telescope to track source ...}
2009-Mar-18 23:30:56 LOG3    waittrk: Start waittrk 5
2009-Mar-18 23:30:56 START   begin_task: Starting task 'waiting on telescope movement'
2009-Mar-18 23:30:56 LOG5    begin_task: Level: (4)    ID = <10230>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:01 STOP    end_task: Finishing task 'waiting on telescope movement' with status 'OK'
2009-Mar-18 23:31:01 LOG5    end_task: Level: (4)    ID = <10230>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:01 START   begin_task: Starting task 'waiting on telescope on source'
2009-Mar-18 23:31:01 LOG5    begin_task: Level: (4)    ID = <10231>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:32 STOP    end_task: Finishing task 'waiting on telescope on source' with status 'OK'
2009-Mar-18 23:31:32 LOG5    end_task: Level: (4)    ID = <10231>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:32 LOG4    send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy
2009-Mar-18 23:31:32 INFO2   waittrk: Now tracking AGES3193_p2_038
2009-Mar-18 23:31:32 LOG4    waittrk: Current telescope position:  Az = 110.54  ZA = 14.54
2009-Mar-18 23:31:32 STOP    finish_task: Finishing task 'waiting on telescope'
2009-Mar-18 23:31:32 LOG5    finish_task: Level: (3)    ID = <10229>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:32 INFO2   finish_task: DONE finished waiting: telescope on source
2009-Mar-18 23:31:32 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 23:31:32 STOP    end_task: Finishing task 'waiting on telescope' with status 'OK'
2009-Mar-18 23:31:32 LOG5    end_task: Level: (3)    ID = <10229>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:32 START   begin_task: Starting task 'selecting calibration type'
2009-Mar-18 23:31:32 LOG5    begin_task: Level: (3)    ID = <10232>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:32 LOG3    vw_send: To DATATAKING: setcal hcorcal
2009-Mar-18 23:31:32 LOG2    socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE'
2009-Mar-18 23:31:32 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 23:31:32 START   begin_task: Starting task 'waiting on setcal'
2009-Mar-18 23:31:32 LOG5    begin_task: Level: (4)    ID = <10233>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:32 LOG4    got_cormsg: From DATATAKING: setcal hcorcal
2009-Mar-18 23:31:32 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 23:31:33 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:31:33 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-18 23:31:33 STOP    end_task: Finishing task 'waiting on setcal' with status 'OK'
2009-Mar-18 23:31:33 LOG5    end_task: Level: (4)    ID = <10233>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:33 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'setcal'
2009-Mar-18 23:31:33 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-18 23:31:33 LOG3    socket_wait: To ALFAMON: CAL HI
2009-Mar-18 23:31:33 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-18 23:31:33 LOG5    begin_task: Level: (4)    ID = <10234>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:33 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:31:33 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-18 23:31:33 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-18 23:31:33 LOG5    end_task: Level: (4)    ID = <10234>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:33 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-18 23:31:33 LOG3    to_alfamon: To ALFAMON: CAL HI
2009-Mar-18 23:31:33 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-18 23:31:33 LOG3    socket_wait: To ALFAMON: NOISE ACTIVE
2009-Mar-18 23:31:33 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-18 23:31:33 LOG5    begin_task: Level: (4)    ID = <10235>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:33 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-18 23:31:33 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-18 23:31:33 LOG5    end_task: Level: (4)    ID = <10235>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:33 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-18 23:31:33 LOG3    to_alfamon: To ALFAMON: NOISE ACTIVE
2009-Mar-18 23:31:33 STOP    end_task: Finishing task 'selecting calibration type' with status 'OK'
2009-Mar-18 23:31:33 LOG5    end_task: Level: (3)    ID = <10232>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:33 LOG5    dopset_later: Calling 'dopset_later 45.490308718494077'
2009-Mar-18 23:31:33 INFO3   dopset_later: Setting Doppler correction for 23:32:18 (45.5 seconds from now)
2009-Mar-18 23:31:33 LOG5    antvel: Calling 'antvel 110.790000 14.530515 F 45.490308718494077'
2009-Mar-18 23:31:33 LOG2    antvel: Transforming current Az = 110.79  ZA = 14.53 to apparent RA = 09:53:33.2  Dec = +22:54:47.4
2009-Mar-18 23:31:33 LOG2    antvel: Parameters to Doppler: Heliocentric 99138 2009 77 0.0
2009-Mar-18 23:31:33 INFO5   antvel: Computed antenna velocity: +17.04237 km/s
2009-Mar-18 23:31:33 LOG3    dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=17.0423666035 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786
2009-Mar-18 23:31:33 INFO4   dopset_gen: New sky frequencies: 1381.164913 1381.164913 1381.164913 1381.164913 1381.164913 1381.164913 1381.164913 1381.164913 1381.164913
2009-Mar-18 23:31:33 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1381.164913 sky0=1381.164913 sky1=1381.164913 sky2=1381.164913 sky3=1381.164913 sky4=1381.164913 sky5=1381.164913 sky6=1381.164913 sky7=1381.164913 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-18 23:31:33 LOG2    dopset_gen: Result from 'sky2syn': 1631.164913 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-18 23:31:33 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1631164913.0}
2009-Mar-18 23:31:33 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 23:31:33 LOG4    send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation}
2009-Mar-18 23:31:33 INFO3   fixed_driftmap: Switching to tracking mode for calibration
2009-Mar-18 23:31:33 INFO5   fixed_driftmap: Tracking J2000 position:  RA = 09:52:19.6  Dec = +22:57:24.3
2009-Mar-18 23:31:33 LOG3    track_source: Calling 'track_source AGES3193_p2_038 095219.6 225724.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)'
2009-Mar-18 23:31:33 START   begin_task: Starting task 'sending tracking commands'
2009-Mar-18 23:31:33 LOG5    begin_task: Level: (3)    ID = <10236>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:33 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_038}    INFO {Slewing to source 'AGES3193_p2_038' ...}
2009-Mar-18 23:31:33 INFO1   track_source: Starting to track AGES3193_p2_038
2009-Mar-18 23:31:33 LOG3    vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_038"
2009-Mar-18 23:31:33 LOG3    vw_send: To DATATAKING: set ra 095219.6
2009-Mar-18 23:31:33 LOG3    vw_send: To DATATAKING: set dec 225724.3
2009-Mar-18 23:31:33 LOG3    vw_send: To DATATAKING: pnt tr send
2009-Mar-18 23:31:33 LOG3    vw_send: To DATATAKING: pnt tr 095219.6 225724.3 -CJ
2009-Mar-18 23:31:33 LOG3    vw_send: To DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 23:31:33 STOP    finish_task: Finishing task 'sending tracking commands'
2009-Mar-18 23:31:33 LOG5    finish_task: Level: (3)    ID = <10236>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:33 INFO2   finish_task: DONE finished sending: tracking commands
2009-Mar-18 23:31:33 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 23:31:33 STOP    end_task: Finishing task 'sending tracking commands' with status 'OK'
2009-Mar-18 23:31:33 LOG5    end_task: Level: (3)    ID = <10236>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:33 START   begin_task: Starting task 'waiting on telescope'
2009-Mar-18 23:31:33 LOG5    begin_task: Level: (3)    ID = <10237>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:33 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew    INFO {Waiting for telescope to track source ...}
2009-Mar-18 23:31:33 LOG3    waittrk: Start waittrk 5
2009-Mar-18 23:31:33 START   begin_task: Starting task 'waiting on telescope movement'
2009-Mar-18 23:31:33 LOG5    begin_task: Level: (4)    ID = <10238>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:33 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1631164913.0}
2009-Mar-18 23:31:33 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 23:31:33 LOG4    got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_038"
2009-Mar-18 23:31:33 LOG4    got_cormsg: From DATATAKING: set ra 095219.6
2009-Mar-18 23:31:33 LOG4    got_cormsg: From DATATAKING: set dec 225724.3
2009-Mar-18 23:31:33 LOG4    got_cormsg: From DATATAKING: vw% vw%
2009-Mar-18 23:31:33 LOG4    got_cormsg: From DATATAKING: vw% 095219.6
2009-Mar-18 23:31:33 LOG4    got_cormsg: From DATATAKING: vw% 225724.3
2009-Mar-18 23:31:33 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:31:33 LOG4    got_cormsg: From DATATAKING: pnt tr send
2009-Mar-18 23:31:33 LOG4    got_cormsg: From DATATAKING: pnt tr 095219.6 225724.3 -CJ
2009-Mar-18 23:31:33 LOG4    got_cormsg: From DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 23:31:33 LOG4    got_cormsg: From DATATAKING: vw% vw%
2009-Mar-18 23:31:33 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:31:38 STOP    end_task: Finishing task 'waiting on telescope movement' with status 'OK'
2009-Mar-18 23:31:38 LOG5    end_task: Level: (4)    ID = <10238>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:38 START   begin_task: Starting task 'waiting on telescope on source'
2009-Mar-18 23:31:38 LOG5    begin_task: Level: (4)    ID = <10239>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:40 STOP    end_task: Finishing task 'waiting on telescope on source' with status 'OK'
2009-Mar-18 23:31:40 LOG5    end_task: Level: (4)    ID = <10239>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:41 LOG4    send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy
2009-Mar-18 23:31:41 INFO2   waittrk: Now tracking AGES3193_p2_038
2009-Mar-18 23:31:41 LOG4    waittrk: Current telescope position:  Az = 110.52  ZA = 14.55
2009-Mar-18 23:31:41 STOP    finish_task: Finishing task 'waiting on telescope'
2009-Mar-18 23:31:41 LOG5    finish_task: Level: (3)    ID = <10237>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:41 INFO2   finish_task: DONE finished waiting: telescope on source
2009-Mar-18 23:31:41 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 23:31:41 STOP    end_task: Finishing task 'waiting on telescope' with status 'OK'
2009-Mar-18 23:31:41 LOG5    end_task: Level: (3)    ID = <10237>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:41 START   begin_task: Starting task 'adjusting WAPP power'
2009-Mar-18 23:31:41 LOG5    begin_task: Level: (3)    ID = <10240>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:41 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT    BITMAP stat_power INFO {Adjusting WAPP power ...}
2009-Mar-18 23:31:41 INFO2   adjust_power: Starting to adjust WAPP power
2009-Mar-18 23:31:41 LOG3    vw_send: To DATATAKING: adjpwrif2 
2009-Mar-18 23:31:41 LOG2    socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE'
2009-Mar-18 23:31:41 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 23:31:41 START   begin_task: Starting task 'waiting on adjpwrif2'
2009-Mar-18 23:31:41 LOG5    begin_task: Level: (4)    ID = <10241>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:41 LOG4    got_cormsg: From DATATAKING: adjpwrif2
2009-Mar-18 23:31:41 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 23:31:44 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:31:44 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-18 23:31:44 STOP    end_task: Finishing task 'waiting on adjpwrif2' with status 'OK'
2009-Mar-18 23:31:44 LOG5    end_task: Level: (4)    ID = <10241>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:44 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2'
2009-Mar-18 23:31:44 START   begin_task: Starting task 'adjusting WAPP power'
2009-Mar-18 23:31:44 LOG5    begin_task: Level: (4)    ID = <10242>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:44 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT    BITMAP stat_power INFO {Adjusting power ...}
2009-Mar-18 23:31:44 LOG3    sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-18 23:31:44 LOG3    sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-18 23:31:44 LOG3    sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-18 23:31:44 LOG3    sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-18 23:31:44 START   begin_task: Starting task 'waiting on adjust WAPP power'
2009-Mar-18 23:31:44 LOG5    begin_task: Level: (5)    ID = <10243>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:44 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:31:44 LOG4    WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1'
2009-Mar-18 23:31:44 INFO2   WAPP=1-auto_atten_dual: Attenuators beam 0:  7  6 dB  ---  beam 1:  7  6 dB
2009-Mar-18 23:31:44 INFO2   WAPP=3-auto_atten_dual: Attenuators beam 4:  3  1 dB  ---  beam 5:  6  4 dB
2009-Mar-18 23:31:44 INFO2   WAPP=2-auto_atten_dual: Attenuators beam 2:  7  4 dB  ---  beam 3:  4  3 dB
2009-Mar-18 23:31:44 INFO2   WAPP=4-auto_atten_dual: Attenuators beam 6:  3  0 dB  ---  beam 7:  3  0 dB
2009-Mar-18 23:31:44 INFO1   WAPP=1+2+3+4-adjust_power: DONE adjusting power
2009-Mar-18 23:31:44 STOP    end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK'
2009-Mar-18 23:31:44 LOG5    end_task: Level: (5)    ID = <10243>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:44 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 0:  1.084  0.988    ALFA beam 1:  0.964  1.093
2009-Mar-18 23:31:44 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 2:  0.900  1.031    ALFA beam 3:  0.944  0.950
2009-Mar-18 23:31:44 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 4:  0.975  1.091    ALFA beam 5:  0.957  1.072
2009-Mar-18 23:31:44 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 6:  1.034  0.109    ALFA beam 7:  0.914  0.120
2009-Mar-18 23:31:44 STOP    finish_task: Finishing task 'adjusting WAPP power'
2009-Mar-18 23:31:44 LOG5    finish_task: Level: (4)    ID = <10242>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:44 INFO3   finish_task: DONE finished adjusting: WAPP power
2009-Mar-18 23:31:44 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 23:31:44 STOP    end_task: Finishing task 'adjusting WAPP power' with status 'OK'
2009-Mar-18 23:31:44 LOG5    end_task: Level: (4)    ID = <10242>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:44 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_busy
2009-Mar-18 23:31:44 STOP    finish_task: Finishing task 'adjusting WAPP power'
2009-Mar-18 23:31:44 LOG5    finish_task: Level: (3)    ID = <10240>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:44 INFO2   finish_task: DONE finished adjusting: WAPP power levels
2009-Mar-18 23:31:44 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 23:31:45 STOP    end_task: Finishing task 'adjusting WAPP power' with status 'OK'
2009-Mar-18 23:31:45 LOG5    end_task: Level: (3)    ID = <10240>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:45 LOG3    send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin
2009-Mar-18 23:31:45 LOG3    send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin
2009-Mar-18 23:31:45 LOG3    send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin
2009-Mar-18 23:31:45 LOG3    send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin
2009-Mar-18 23:31:45 LOG2    take_cal: Calling 'take_cal hcorcal 5 0'
2009-Mar-18 23:31:45 START   begin_task: Starting task 'WAPP calibration'
2009-Mar-18 23:31:45 LOG5    begin_task: Level: (3)    ID = <10244>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:45 LOG4    send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration}    INFO {Making WAPP calibration ...}
2009-Mar-18 23:31:45 START   begin_task: Starting task 'selecting calibration type'
2009-Mar-18 23:31:45 LOG5    begin_task: Level: (4)    ID = <10245>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:45 LOG3    vw_send: To DATATAKING: setcal hcorcal
2009-Mar-18 23:31:45 LOG2    socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE'
2009-Mar-18 23:31:45 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 23:31:45 START   begin_task: Starting task 'waiting on setcal'
2009-Mar-18 23:31:45 LOG5    begin_task: Level: (5)    ID = <10246>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:45 LOG4    WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin'
2009-Mar-18 23:31:45 LOG4    got_cormsg: From DATATAKING: setcal hcorcal
2009-Mar-18 23:31:45 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 23:31:45 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:31:45 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-18 23:31:45 STOP    end_task: Finishing task 'waiting on setcal' with status 'OK'
2009-Mar-18 23:31:45 LOG5    end_task: Level: (5)    ID = <10246>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:45 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'setcal'
2009-Mar-18 23:31:45 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-18 23:31:45 LOG3    socket_wait: To ALFAMON: CAL HI
2009-Mar-18 23:31:45 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-18 23:31:45 LOG5    begin_task: Level: (5)    ID = <10247>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:45 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:31:45 NOTE    WAPPDATA-new_file: New FITS file: wapp.20090318.a2048.0004.fits
2009-Mar-18 23:31:45 LOG4    send_obs_status: To obs_status: <0> FILENAME {wapp.20090318.a2048.0004.fits}
2009-Mar-18 23:31:46 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-18 23:31:46 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-18 23:31:46 LOG5    end_task: Level: (5)    ID = <10247>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:46 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-18 23:31:46 LOG3    to_alfamon: To ALFAMON: CAL HI
2009-Mar-18 23:31:46 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-18 23:31:46 LOG3    socket_wait: To ALFAMON: NOISE ACTIVE
2009-Mar-18 23:31:46 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-18 23:31:46 LOG5    begin_task: Level: (5)    ID = <10248>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:46 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-18 23:31:46 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-18 23:31:46 LOG5    end_task: Level: (5)    ID = <10248>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:46 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-18 23:31:46 LOG3    to_alfamon: To ALFAMON: NOISE ACTIVE
2009-Mar-18 23:31:46 STOP    end_task: Finishing task 'selecting calibration type' with status 'OK'
2009-Mar-18 23:31:46 LOG5    end_task: Level: (4)    ID = <10245>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:46 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...}
2009-Mar-18 23:31:46 LOG3    wapp_calcontrol: To CALCONTROL: CALON
2009-Mar-18 23:31:46 LOG3    sock_errsend: To CALCONTROL: CALON STATUS
2009-Mar-18 23:31:46 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-18 23:31:46 LOG5    begin_task: Level: (4)    ID = <10249>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:46 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-18 23:31:46 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x03
2009-Mar-18 23:31:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 23:31:46 LOG4    check_wapp_levels: WAPP-1 power levels:    1.084  0.988    0.964  1.093
2009-Mar-18 23:31:46 LOG4    check_wapp_levels: WAPP-2 power levels:    0.900  1.031    0.944  0.950
2009-Mar-18 23:31:46 LOG4    check_wapp_levels: WAPP-3 power levels:    0.975  1.091    0.957  1.072
2009-Mar-18 23:31:46 LOG4    check_wapp_levels: WAPP-4 power levels:    1.034  0.109    0.914  0.120
2009-Mar-18 23:31:46 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-18 23:31:46 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-18 23:31:46 LOG5    end_task: Level: (4)    ID = <10249>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:46 LOG4    send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...}
2009-Mar-18 23:31:46 LOG4    take_data: Calling 'take_data 5 5 CAL ON -'
2009-Mar-18 23:31:46 START   begin_task: Starting task 'WAPP spectral observation'
2009-Mar-18 23:31:46 LOG5    begin_task: Level: (4)    ID = <10250>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:46 LOG5    log_alfabeam: Parameters: 9.8721111111111135 22.956749999999996 10.866796 2009.2134986500876 -88.900101
2009-Mar-18 23:31:46 LOG4    log_alfabeam: ALFABEAM 0   9.872111111111115  22.956750000000007
2009-Mar-18 23:31:46 LOG4    log_alfabeam: ALFABEAM 1   9.870079757824218  23.047835413683167
2009-Mar-18 23:31:46 LOG4    log_alfabeam: ALFABEAM 2   9.864702353329788  22.986882151778371
2009-Mar-18 23:31:46 LOG4    log_alfabeam: ALFABEAM 3   9.866765373188869  22.895675447427855
2009-Mar-18 23:31:46 LOG4    log_alfabeam: ALFABEAM 4   9.874180435285322  22.866077958045842
2009-Mar-18 23:31:46 LOG4    log_alfabeam: ALFABEAM 5   9.879517066082293  22.926564636782611
2009-Mar-18 23:31:46 LOG4    log_alfabeam: ALFABEAM 6   9.877479174109856  23.017115878093861
2009-Mar-18 23:31:46 INFO2   take_data: Starting WAPP scan: 907700196
2009-Mar-18 23:31:46 LOG4    send_obs_status: To obs_status: <0> TASKTIME 5
2009-Mar-18 23:31:46 START   begin_task: Starting task 'waiting on WAPP spectra'
2009-Mar-18 23:31:46 LOG5    begin_task: Level: (5)    ID = <10251>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:46 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 23:31:46 INFO1   WAPP=1+2+3+4-start_spectra: start sec 12707.00
2009-Mar-18 23:31:52 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.164913 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 23:31:52 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.164913 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 23:31:52 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.164913 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 23:31:52 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.164913 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 23:31:52 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.164913 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 23:31:52 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.164913 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 23:31:52 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.164913 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 23:31:52 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.164913 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 23:31:52 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.164913 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 23:31:52 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 23:31:52 STOP    end_task: Finishing task 'waiting on WAPP spectra' with status 'OK'
2009-Mar-18 23:31:52 LOG5    end_task: Level: (5)    ID = <10251>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:52 STOP    end_task: Finishing task 'WAPP spectral observation' with status 'OK'
2009-Mar-18 23:31:52 LOG5    end_task: Level: (4)    ID = <10250>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:52 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...}
2009-Mar-18 23:31:52 LOG3    wapp_calcontrol: To CALCONTROL: CALOFF
2009-Mar-18 23:31:52 LOG3    sock_errsend: To CALCONTROL: CALOFF STATUS
2009-Mar-18 23:31:52 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-18 23:31:52 LOG5    begin_task: Level: (4)    ID = <10252>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:53 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-18 23:31:53 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x02
2009-Mar-18 23:31:53 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-18 23:31:53 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-18 23:31:53 LOG5    end_task: Level: (4)    ID = <10252>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:53 LOG4    send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...}
2009-Mar-18 23:31:53 LOG4    take_data: Calling 'take_data 5 5 CAL OFF -'
2009-Mar-18 23:31:53 START   begin_task: Starting task 'WAPP spectral observation'
2009-Mar-18 23:31:53 LOG5    begin_task: Level: (4)    ID = <10253>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:53 LOG5    log_alfabeam: Parameters: 9.8721111111111135 22.956749999999996 10.868745 2009.2134988719042 -88.900101
2009-Mar-18 23:31:53 LOG4    log_alfabeam: ALFABEAM 0   9.872111111111114  22.956749999999992
2009-Mar-18 23:31:53 LOG4    log_alfabeam: ALFABEAM 1   9.870075223964070  23.047815887292693
2009-Mar-18 23:31:53 LOG4    log_alfabeam: ALFABEAM 2   9.864700869681094  22.986812397239415
2009-Mar-18 23:31:53 LOG4    log_alfabeam: ALFABEAM 3   9.866768370468197  22.895625771761338
2009-Mar-18 23:31:53 LOG4    log_alfabeam: ALFABEAM 4   9.874184867397164  22.866097062038264
2009-Mar-18 23:31:53 LOG4    log_alfabeam: ALFABEAM 5   9.879518554585914  22.926634320056014
2009-Mar-18 23:31:53 LOG4    log_alfabeam: ALFABEAM 6   9.877476178490626  23.017167005005767
2009-Mar-18 23:31:53 INFO2   take_data: Starting WAPP scan: 907700197
2009-Mar-18 23:31:53 LOG4    send_obs_status: To obs_status: <0> TASKTIME 5
2009-Mar-18 23:31:53 START   begin_task: Starting task 'waiting on WAPP spectra'
2009-Mar-18 23:31:53 LOG5    begin_task: Level: (5)    ID = <10254>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:53 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 23:31:53 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.503 (still bad)
2009-Mar-18 23:31:53 INFO1   WAPP=1+2+3+4-start_spectra: start sec 12714.00
2009-Mar-18 23:31:59 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.164913 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 23:31:59 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.164913 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 23:31:59 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.164913 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 23:31:59 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.164913 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 23:31:59 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.164913 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 23:31:59 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.164913 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 23:31:59 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.164913 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 23:31:59 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.164913 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 23:31:59 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.164913 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 23:31:59 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.419 (still bad)
2009-Mar-18 23:31:59 INFO1   WAPP=1+2+3+4-start_spectra: Skipping Tsys
2009-Mar-18 23:31:59 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 23:31:59 STOP    end_task: Finishing task 'waiting on WAPP spectra' with status 'OK'
2009-Mar-18 23:31:59 LOG5    end_task: Level: (5)    ID = <10254>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:59 STOP    end_task: Finishing task 'WAPP spectral observation' with status 'OK'
2009-Mar-18 23:31:59 LOG5    end_task: Level: (4)    ID = <10253>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:59 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_busy
2009-Mar-18 23:31:59 STOP    finish_task: Finishing task 'WAPP calibration'
2009-Mar-18 23:31:59 LOG5    finish_task: Level: (3)    ID = <10244>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:59 INFO2   finish_task: DONE finished calibration: WAPP calibration
2009-Mar-18 23:31:59 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 23:31:59 STOP    end_task: Finishing task 'WAPP calibration' with status 'OK'
2009-Mar-18 23:31:59 LOG5    end_task: Level: (3)    ID = <10244>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:59 LOG4    send_obs_status: To obs_status: <1> INFO {Returning to drift position}
2009-Mar-18 23:31:59 INFO4   fixed_driftmap: Sending telescope back to drift position Az = 110.79 and ZA = 14.53
2009-Mar-18 23:31:59 LOG3    track_source: Calling 'track_source AGES3193_p2_038 110.79 14.5305145738 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)'
2009-Mar-18 23:31:59 START   begin_task: Starting task 'sending tracking commands'
2009-Mar-18 23:31:59 LOG5    begin_task: Level: (3)    ID = <10255>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:59 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_038}    INFO {Slewing to source 'AGES3193_p2_038' ...}
2009-Mar-18 23:31:59 INFO1   track_source: Starting to track AGES3193_p2_038
2009-Mar-18 23:31:59 LOG3    vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_038"
2009-Mar-18 23:31:59 LOG3    vw_send: To DATATAKING: set ra 110.79
2009-Mar-18 23:31:59 LOG3    vw_send: To DATATAKING: set dec 14.5305145738
2009-Mar-18 23:31:59 LOG3    vw_send: To DATATAKING: pnt tr send
2009-Mar-18 23:31:59 LOG3    vw_send: To DATATAKING: pnt tr 110.79 14.5305145738 -CF
2009-Mar-18 23:31:59 LOG3    vw_send: To DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 23:31:59 STOP    finish_task: Finishing task 'sending tracking commands'
2009-Mar-18 23:31:59 LOG5    finish_task: Level: (3)    ID = <10255>    Status = 0 0 0 0  ok
2009-Mar-18 23:31:59 INFO2   finish_task: DONE finished sending: tracking commands
2009-Mar-18 23:32:00 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 23:32:00 STOP    end_task: Finishing task 'sending tracking commands' with status 'OK'
2009-Mar-18 23:32:00 LOG5    end_task: Level: (3)    ID = <10255>    Status = 0 0 0 0  ok
2009-Mar-18 23:32:00 LOG1    fixed_driftmap: Parameters: HA = +00:59:00.7  Start = 10:52:34.0  LST = 10:52:14.5  diff = 19.5 secs
2009-Mar-18 23:32:00 INFO2   fixed_driftmap: Waiting 17.5 seconds for RA 9:53:33
2009-Mar-18 23:32:00 INFO2   lstwait: Waiting for 17.5 secs from LST 10:52:15 to LST 10:52:32 ...
2009-Mar-18 23:32:00 LOG4    send_obs_status: To obs_status: <1> TASKTIME 17.495754322974669 BITMAP stat_wait MESSAGE {Waiting ...}
2009-Mar-18 23:32:00 START   begin_task: Starting task 'waiting on wait on LST'
2009-Mar-18 23:32:00 LOG5    begin_task: Level: (3)    ID = <10256>    Status = 0 0 0 0  ok
2009-Mar-18 23:32:00 LOG4    got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_038"
2009-Mar-18 23:32:00 LOG4    got_cormsg: From DATATAKING: set ra 110.79
2009-Mar-18 23:32:00 LOG4    got_cormsg: From DATATAKING: set dec 14.5305145738
2009-Mar-18 23:32:00 LOG4    got_cormsg: From DATATAKING: vw% 110.79
2009-Mar-18 23:32:00 LOG4    got_cormsg: From DATATAKING: vw% 14.5305145738
2009-Mar-18 23:32:00 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:32:00 LOG4    got_cormsg: From DATATAKING: pnt tr send
2009-Mar-18 23:32:00 LOG4    got_cormsg: From DATATAKING: pnt tr 110.79 14.5305145738 -CF
2009-Mar-18 23:32:00 LOG4    got_cormsg: From DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 23:32:00 LOG4    got_cormsg: From DATATAKING: vw% vw%
2009-Mar-18 23:32:00 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:32:05 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad)
2009-Mar-18 23:32:17 STOP    end_task: Finishing task 'waiting on wait on LST' with status 'OK'
2009-Mar-18 23:32:17 LOG5    end_task: Level: (3)    ID = <10256>    Status = 0 0 0 0  ok
2009-Mar-18 23:32:17 LOG4    lstwait: Finished waiting 0.51 seconds late
2009-Mar-18 23:32:17 INFO3   lstwait: Finished waiting
2009-Mar-18 23:32:17 LOG4    send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy
2009-Mar-18 23:32:17 INFO2   fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1
2009-Mar-18 23:32:17 LOG4    send_obs_status: To obs_status: <1> LOOP 1
2009-Mar-18 23:32:17 LOG4    send_obs_status: To obs_status: <1> INFO {Making drift scan}
2009-Mar-18 23:32:17 LOG4    send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...}
2009-Mar-18 23:32:17 LOG4    take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -'
2009-Mar-18 23:32:17 START   begin_task: Starting task 'WAPP spectral observation'
2009-Mar-18 23:32:17 LOG5    begin_task: Level: (3)    ID = <10257>    Status = 0 0 0 0  ok
2009-Mar-18 23:32:17 LOG5    log_alfabeam: Can't log alfabeam, not J2000
2009-Mar-18 23:32:17 INFO2   take_data: Starting WAPP scan: 907700198
2009-Mar-18 23:32:18 LOG4    send_obs_status: To obs_status: <0> TASKTIME 1200
2009-Mar-18 23:32:18 START   begin_task: Starting task 'waiting on WAPP spectra'
2009-Mar-18 23:32:18 LOG5    begin_task: Level: (4)    ID = <10258>    Status = 0 0 0 0  ok
2009-Mar-18 23:32:18 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-18 23:32:18 INFO1   WAPP=1+2+3+4-start_spectra: start sec 12739.00
2009-Mar-18 23:32:20 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.164913 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-18 23:32:20 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.164913 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 23:32:20 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.164913 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 23:32:20 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.164913 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 23:32:20 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.164913 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-18 23:32:20 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.164913 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 23:32:20 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.164913 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 23:32:20 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.164913 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-18 23:32:20 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.164913 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-18 23:32:20 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad)
2009-Mar-18 23:32:22 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad)
2009-Mar-18 23:32:24 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad)
2009-Mar-18 23:32:26 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad)
2009-Mar-18 23:32:28 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad)
2009-Mar-18 23:32:30 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad)
2009-Mar-18 23:32:32 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad)
2009-Mar-18 23:32:34 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad)
2009-Mar-18 23:32:36 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad)
2009-Mar-18 23:32:38 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad)
2009-Mar-18 23:32:40 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad)
2009-Mar-18 23:32:42 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad)
2009-Mar-18 23:32:44 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad)
2009-Mar-18 23:32:46 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad)
2009-Mar-18 23:32:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 23:32:48 LOG4    check_wapp_levels: WAPP-1 power levels:    1.091  0.991    0.963  1.095
2009-Mar-18 23:32:48 LOG4    check_wapp_levels: WAPP-2 power levels:    0.900  1.028    0.947  0.951
2009-Mar-18 23:32:48 LOG4    check_wapp_levels: WAPP-3 power levels:    0.974  1.092    0.959  1.073
2009-Mar-18 23:32:48 LOG4    check_wapp_levels: WAPP-4 power levels:    1.034  0.109    0.915  0.120
2009-Mar-18 23:32:50 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad)
2009-Mar-18 23:32:52 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad)
2009-Mar-18 23:32:55 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad)
2009-Mar-18 23:32:57 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad)
2009-Mar-18 23:32:59 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad)
2009-Mar-18 23:33:01 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad)
2009-Mar-18 23:33:03 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad)
2009-Mar-18 23:33:05 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad)
2009-Mar-18 23:33:07 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad)
2009-Mar-18 23:33:09 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad)
2009-Mar-18 23:33:11 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad)
2009-Mar-18 23:33:13 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad)
2009-Mar-18 23:33:15 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad)
2009-Mar-18 23:33:17 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad)
2009-Mar-18 23:33:19 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad)
2009-Mar-18 23:33:21 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad)
2009-Mar-18 23:33:23 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad)
2009-Mar-18 23:33:25 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad)
2009-Mar-18 23:33:27 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad)
2009-Mar-18 23:33:29 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad)
2009-Mar-18 23:33:31 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad)
2009-Mar-18 23:33:33 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad)
2009-Mar-18 23:33:35 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad)
2009-Mar-18 23:33:37 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad)
2009-Mar-18 23:33:39 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad)
2009-Mar-18 23:33:41 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad)
2009-Mar-18 23:33:43 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad)
2009-Mar-18 23:33:45 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad)
2009-Mar-18 23:33:47 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad)
2009-Mar-18 23:33:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 23:33:49 LOG4    check_wapp_levels: WAPP-1 power levels:    1.086  0.988    0.966  1.097
2009-Mar-18 23:33:49 LOG4    check_wapp_levels: WAPP-2 power levels:    0.897  1.029    0.944  0.947
2009-Mar-18 23:33:49 LOG4    check_wapp_levels: WAPP-3 power levels:    0.970  1.091    0.956  1.071
2009-Mar-18 23:33:49 LOG4    check_wapp_levels: WAPP-4 power levels:    1.035  0.109    0.915  0.120
2009-Mar-18 23:33:51 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad)
2009-Mar-18 23:33:53 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad)
2009-Mar-18 23:33:55 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad)
2009-Mar-18 23:33:57 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad)
2009-Mar-18 23:33:59 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad)
2009-Mar-18 23:34:01 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad)
2009-Mar-18 23:34:03 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad)
2009-Mar-18 23:34:05 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad)
2009-Mar-18 23:34:07 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad)
2009-Mar-18 23:34:09 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad)
2009-Mar-18 23:34:11 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad)
2009-Mar-18 23:34:13 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad)
2009-Mar-18 23:34:15 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad)
2009-Mar-18 23:34:18 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad)
2009-Mar-18 23:34:20 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad)
2009-Mar-18 23:34:22 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad)
2009-Mar-18 23:34:24 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad)
2009-Mar-18 23:34:26 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad)
2009-Mar-18 23:34:28 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad)
2009-Mar-18 23:34:30 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad)
2009-Mar-18 23:34:32 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad)
2009-Mar-18 23:34:34 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad)
2009-Mar-18 23:34:36 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad)
2009-Mar-18 23:34:38 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad)
2009-Mar-18 23:34:40 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad)
2009-Mar-18 23:34:42 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad)
2009-Mar-18 23:34:44 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad)
2009-Mar-18 23:34:46 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad)
2009-Mar-18 23:34:48 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad)
2009-Mar-18 23:34:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 23:34:50 LOG4    check_wapp_levels: WAPP-1 power levels:    1.087  0.989    0.960  1.092
2009-Mar-18 23:34:50 LOG4    check_wapp_levels: WAPP-2 power levels:    0.894  1.026    0.943  0.944
2009-Mar-18 23:34:50 LOG4    check_wapp_levels: WAPP-3 power levels:    0.967  1.085    0.951  1.063
2009-Mar-18 23:34:50 LOG4    check_wapp_levels: WAPP-4 power levels:    1.029  0.109    0.909  0.120
2009-Mar-18 23:34:52 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad)
2009-Mar-18 23:34:54 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad)
2009-Mar-18 23:34:56 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad)
2009-Mar-18 23:34:58 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad)
2009-Mar-18 23:35:00 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad)
2009-Mar-18 23:35:02 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad)
2009-Mar-18 23:35:03 LOG3    WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964  diff = 2)!
2009-Mar-18 23:35:04 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad)
2009-Mar-18 23:35:06 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad)
2009-Mar-18 23:35:08 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad)
2009-Mar-18 23:35:10 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad)
2009-Mar-18 23:35:12 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad)
2009-Mar-18 23:35:14 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad)
2009-Mar-18 23:35:16 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad)
2009-Mar-18 23:35:18 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad)
2009-Mar-18 23:35:20 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad)
2009-Mar-18 23:35:22 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad)
2009-Mar-18 23:35:24 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad)
2009-Mar-18 23:35:26 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.087 (still bad)
2009-Mar-18 23:35:28 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad)
2009-Mar-18 23:35:30 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad)
2009-Mar-18 23:35:32 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad)
2009-Mar-18 23:35:34 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad)
2009-Mar-18 23:35:36 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad)
2009-Mar-18 23:35:38 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad)
2009-Mar-18 23:35:40 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad)
2009-Mar-18 23:35:43 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad)
2009-Mar-18 23:35:45 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad)
2009-Mar-18 23:35:47 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad)
2009-Mar-18 23:35:49 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad)
2009-Mar-18 23:35:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 23:35:51 LOG4    check_wapp_levels: WAPP-1 power levels:    1.090  0.989    0.961  1.088
2009-Mar-18 23:35:51 LOG4    check_wapp_levels: WAPP-2 power levels:    0.893  1.025    0.943  0.943
2009-Mar-18 23:35:51 LOG4    check_wapp_levels: WAPP-3 power levels:    0.966  1.084    0.950  1.064
2009-Mar-18 23:35:51 LOG4    check_wapp_levels: WAPP-4 power levels:    1.030  0.109    0.909  0.119
2009-Mar-18 23:35:53 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad)
2009-Mar-18 23:35:55 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad)
2009-Mar-18 23:35:57 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad)
2009-Mar-18 23:35:59 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad)
2009-Mar-18 23:36:01 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad)
2009-Mar-18 23:36:03 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad)
2009-Mar-18 23:36:05 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad)
2009-Mar-18 23:36:07 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad)
2009-Mar-18 23:36:09 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad)
2009-Mar-18 23:36:11 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad)
2009-Mar-18 23:36:13 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad)
2009-Mar-18 23:36:15 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.088 (still bad)
2009-Mar-18 23:36:17 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad)
2009-Mar-18 23:36:19 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad)
2009-Mar-18 23:36:21 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad)
2009-Mar-18 23:36:23 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.089 (still bad)
2009-Mar-18 23:36:25 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad)
2009-Mar-18 23:36:27 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.090 (still bad)
2009-Mar-18 23:36:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.092 (still bad)
2009-Mar-18 23:36:31 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.099 (still bad)
2009-Mar-18 23:36:33 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad)
2009-Mar-18 23:36:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.091 (still bad)
2009-Mar-18 23:36:37 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad)
2009-Mar-18 23:36:39 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad)
2009-Mar-18 23:36:41 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad)
2009-Mar-18 23:36:43 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.098 (still bad)
2009-Mar-18 23:36:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:36:47 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad)
2009-Mar-18 23:36:49 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad)
2009-Mar-18 23:36:51 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad)
2009-Mar-18 23:36:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 23:36:53 LOG4    check_wapp_levels: WAPP-1 power levels:    1.088  0.989    0.961  1.086
2009-Mar-18 23:36:53 LOG4    check_wapp_levels: WAPP-2 power levels:    0.898  1.026    0.942  0.945
2009-Mar-18 23:36:53 LOG4    check_wapp_levels: WAPP-3 power levels:    0.971  1.094    0.953  1.069
2009-Mar-18 23:36:53 LOG4    check_wapp_levels: WAPP-4 power levels:    1.028  0.109    0.907  0.119
2009-Mar-18 23:36:55 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad)
2009-Mar-18 23:36:57 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad)
2009-Mar-18 23:36:59 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad)
2009-Mar-18 23:37:01 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad)
2009-Mar-18 23:37:03 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad)
2009-Mar-18 23:37:06 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad)
2009-Mar-18 23:37:08 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad)
2009-Mar-18 23:37:10 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad)
2009-Mar-18 23:37:12 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad)
2009-Mar-18 23:37:14 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad)
2009-Mar-18 23:37:16 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad)
2009-Mar-18 23:37:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 23:37:20 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.120 (still bad)
2009-Mar-18 23:37:22 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.115 (still bad)
2009-Mar-18 23:37:24 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad)
2009-Mar-18 23:37:26 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.111 (still bad)
2009-Mar-18 23:37:28 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 23:37:30 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad)
2009-Mar-18 23:37:32 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad)
2009-Mar-18 23:37:34 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad)
2009-Mar-18 23:37:36 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:37:38 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad)
2009-Mar-18 23:37:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.091 (still bad)
2009-Mar-18 23:37:42 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad)
2009-Mar-18 23:37:44 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad)
2009-Mar-18 23:37:46 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.091 (still bad)
2009-Mar-18 23:37:48 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad)
2009-Mar-18 23:37:50 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad)
2009-Mar-18 23:37:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.092 (still bad)
2009-Mar-18 23:37:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 23:37:54 LOG4    check_wapp_levels: WAPP-1 power levels:    1.093  0.992    0.962  1.091
2009-Mar-18 23:37:54 LOG4    check_wapp_levels: WAPP-2 power levels:    0.896  1.026    0.945  0.947
2009-Mar-18 23:37:54 LOG4    check_wapp_levels: WAPP-3 power levels:    0.970  1.091    0.954  1.066
2009-Mar-18 23:37:54 LOG4    check_wapp_levels: WAPP-4 power levels:    1.028  0.108    0.909  0.119
2009-Mar-18 23:37:56 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad)
2009-Mar-18 23:37:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.091 (still bad)
2009-Mar-18 23:38:00 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad)
2009-Mar-18 23:38:02 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad)
2009-Mar-18 23:38:04 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad)
2009-Mar-18 23:38:06 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.095 (still bad)
2009-Mar-18 23:38:08 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.092 (still bad)
2009-Mar-18 23:38:10 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.091 (still bad)
2009-Mar-18 23:38:12 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.092 (still bad)
2009-Mar-18 23:38:14 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad)
2009-Mar-18 23:38:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:38:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad)
2009-Mar-18 23:38:20 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad)
2009-Mar-18 23:38:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.092 (still bad)
2009-Mar-18 23:38:25 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad)
2009-Mar-18 23:38:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.091 (still bad)
2009-Mar-18 23:38:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:38:31 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.093 (still bad)
2009-Mar-18 23:38:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.091 (still bad)
2009-Mar-18 23:38:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.091 (still bad)
2009-Mar-18 23:38:37 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.092 (still bad)
2009-Mar-18 23:38:39 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.091 (still bad)
2009-Mar-18 23:38:41 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.091 (still bad)
2009-Mar-18 23:38:43 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad)
2009-Mar-18 23:38:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.092 (still bad)
2009-Mar-18 23:38:47 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.092 (still bad)
2009-Mar-18 23:38:49 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad)
2009-Mar-18 23:38:51 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:38:53 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad)
2009-Mar-18 23:38:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 23:38:55 LOG4    check_wapp_levels: WAPP-1 power levels:    1.097  0.998    0.964  1.091
2009-Mar-18 23:38:55 LOG4    check_wapp_levels: WAPP-2 power levels:    0.895  1.026    0.943  0.946
2009-Mar-18 23:38:55 LOG4    check_wapp_levels: WAPP-3 power levels:    0.971  1.094    0.951  1.062
2009-Mar-18 23:38:55 LOG4    check_wapp_levels: WAPP-4 power levels:    1.032  0.109    0.912  0.119
2009-Mar-18 23:38:57 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad)
2009-Mar-18 23:38:59 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad)
2009-Mar-18 23:39:01 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad)
2009-Mar-18 23:39:03 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:39:03 LOG3    WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964  diff = 2)!
2009-Mar-18 23:39:05 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad)
2009-Mar-18 23:39:07 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad)
2009-Mar-18 23:39:09 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad)
2009-Mar-18 23:39:11 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:39:13 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad)
2009-Mar-18 23:39:15 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.092 (still bad)
2009-Mar-18 23:39:17 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:39:19 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.097 (still bad)
2009-Mar-18 23:39:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:39:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad)
2009-Mar-18 23:39:25 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:39:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.092 (still bad)
2009-Mar-18 23:39:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:39:31 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad)
2009-Mar-18 23:39:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad)
2009-Mar-18 23:39:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad)
2009-Mar-18 23:39:37 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad)
2009-Mar-18 23:39:39 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad)
2009-Mar-18 23:39:41 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:39:43 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.096 (still bad)
2009-Mar-18 23:39:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:39:47 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:39:50 INFO5   check_wapp_levels: WAPP power levels are between 0.109 and 1.094 (still bad)
2009-Mar-18 23:39:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.092 (still bad)
2009-Mar-18 23:39:54 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:39:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)!
2009-Mar-18 23:39:56 LOG4    check_wapp_levels: WAPP-1 power levels:    1.099  0.999    0.967  1.090
2009-Mar-18 23:39:56 LOG4    check_wapp_levels: WAPP-2 power levels:    0.899  1.031    0.950  0.949
2009-Mar-18 23:39:56 LOG4    check_wapp_levels: WAPP-3 power levels:    0.979  1.098    0.961  1.072
2009-Mar-18 23:39:56 LOG4    check_wapp_levels: WAPP-4 power levels:    1.035  0.109    0.916  0.119
2009-Mar-18 23:39:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.092 (still bad)
2009-Mar-18 23:40:00 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:40:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:40:04 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:40:06 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad)
2009-Mar-18 23:40:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:40:10 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.092 (still bad)
2009-Mar-18 23:40:12 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:40:14 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad)
2009-Mar-18 23:40:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad)
2009-Mar-18 23:40:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad)
2009-Mar-18 23:40:20 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:40:22 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad)
2009-Mar-18 23:40:24 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:40:26 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad)
2009-Mar-18 23:40:28 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:40:30 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad)
2009-Mar-18 23:40:32 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad)
2009-Mar-18 23:40:34 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:40:36 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:40:38 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad)
2009-Mar-18 23:40:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad)
2009-Mar-18 23:40:42 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad)
2009-Mar-18 23:40:44 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad)
2009-Mar-18 23:40:46 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad)
2009-Mar-18 23:40:48 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad)
2009-Mar-18 23:40:50 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad)
2009-Mar-18 23:40:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:40:54 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad)
2009-Mar-18 23:40:56 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad)
2009-Mar-18 23:40:57 LOG3    WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964  diff = 2)!
2009-Mar-18 23:40:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 23:40:58 LOG4    check_wapp_levels: WAPP-1 power levels:    1.092  0.994    0.960  1.084
2009-Mar-18 23:40:58 LOG4    check_wapp_levels: WAPP-2 power levels:    0.897  1.029    0.942  0.943
2009-Mar-18 23:40:58 LOG4    check_wapp_levels: WAPP-3 power levels:    0.969  1.093    0.951  1.059
2009-Mar-18 23:40:58 LOG4    check_wapp_levels: WAPP-4 power levels:    1.031  0.108    0.912  0.119
2009-Mar-18 23:41:00 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad)
2009-Mar-18 23:41:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.092 (still bad)
2009-Mar-18 23:41:04 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.092 (still bad)
2009-Mar-18 23:41:06 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad)
2009-Mar-18 23:41:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:41:10 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.091 (still bad)
2009-Mar-18 23:41:12 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:41:14 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:41:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.092 (still bad)
2009-Mar-18 23:41:19 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:41:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad)
2009-Mar-18 23:41:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad)
2009-Mar-18 23:41:25 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad)
2009-Mar-18 23:41:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad)
2009-Mar-18 23:41:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad)
2009-Mar-18 23:41:31 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad)
2009-Mar-18 23:41:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad)
2009-Mar-18 23:41:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:41:37 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad)
2009-Mar-18 23:41:39 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad)
2009-Mar-18 23:41:41 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad)
2009-Mar-18 23:41:43 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad)
2009-Mar-18 23:41:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.092 (still bad)
2009-Mar-18 23:41:47 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.091 (still bad)
2009-Mar-18 23:41:49 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad)
2009-Mar-18 23:41:51 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:41:53 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad)
2009-Mar-18 23:41:55 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:41:57 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.094 (still bad)
2009-Mar-18 23:41:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 23:41:59 LOG4    check_wapp_levels: WAPP-1 power levels:    1.093  0.995    0.959  1.084
2009-Mar-18 23:41:59 LOG4    check_wapp_levels: WAPP-2 power levels:    0.893  1.025    0.942  0.943
2009-Mar-18 23:41:59 LOG4    check_wapp_levels: WAPP-3 power levels:    0.970  1.094    0.951  1.059
2009-Mar-18 23:41:59 LOG4    check_wapp_levels: WAPP-4 power levels:    1.025  0.108    0.906  0.119
2009-Mar-18 23:42:01 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:42:03 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:42:05 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 23:42:07 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 23:42:09 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 23:42:11 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 23:42:13 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 23:42:15 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:42:17 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad)
2009-Mar-18 23:42:19 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 23:42:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad)
2009-Mar-18 23:42:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:42:25 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad)
2009-Mar-18 23:42:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.093 (still bad)
2009-Mar-18 23:42:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad)
2009-Mar-18 23:42:31 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 23:42:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad)
2009-Mar-18 23:42:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:42:37 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:42:39 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:42:41 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:42:43 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 23:42:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:42:48 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:42:50 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:42:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad)
2009-Mar-18 23:42:54 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:42:56 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 23:42:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 23:43:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 23:43:00 LOG4    check_wapp_levels: WAPP-1 power levels:    1.089  0.992    0.961  1.085
2009-Mar-18 23:43:00 LOG4    check_wapp_levels: WAPP-2 power levels:    0.898  1.030    0.947  0.949
2009-Mar-18 23:43:00 LOG4    check_wapp_levels: WAPP-3 power levels:    0.983  1.107    0.953  1.062
2009-Mar-18 23:43:00 LOG4    check_wapp_levels: WAPP-4 power levels:    1.022  0.108    0.903  0.119
2009-Mar-18 23:43:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad)
2009-Mar-18 23:43:04 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 23:43:06 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 23:43:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.129 (still bad)
2009-Mar-18 23:43:10 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 23:43:12 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.126 (still bad)
2009-Mar-18 23:43:14 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 23:43:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad)
2009-Mar-18 23:43:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad)
2009-Mar-18 23:43:20 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 23:43:22 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad)
2009-Mar-18 23:43:24 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:43:26 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:43:28 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:43:30 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:43:32 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:43:34 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:43:36 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:43:38 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:43:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:43:42 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:43:44 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:43:46 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:43:48 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:43:50 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:43:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:43:54 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:43:56 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:43:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad)
2009-Mar-18 23:44:00 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:44:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 23:44:02 LOG4    check_wapp_levels: WAPP-1 power levels:    1.089  0.987    0.961  1.087
2009-Mar-18 23:44:02 LOG4    check_wapp_levels: WAPP-2 power levels:    0.899  1.033    0.946  0.947
2009-Mar-18 23:44:02 LOG4    check_wapp_levels: WAPP-3 power levels:    0.977  1.100    0.954  1.061
2009-Mar-18 23:44:02 LOG4    check_wapp_levels: WAPP-4 power levels:    1.024  0.108    0.906  0.118
2009-Mar-18 23:44:04 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad)
2009-Mar-18 23:44:06 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:44:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:44:11 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad)
2009-Mar-18 23:44:13 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:44:15 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:44:17 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:44:19 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:44:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 23:44:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:44:25 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad)
2009-Mar-18 23:44:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad)
2009-Mar-18 23:44:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:44:31 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:44:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad)
2009-Mar-18 23:44:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad)
2009-Mar-18 23:44:37 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad)
2009-Mar-18 23:44:39 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:44:41 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.096 (still bad)
2009-Mar-18 23:44:43 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:44:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 23:44:47 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:44:49 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 23:44:51 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad)
2009-Mar-18 23:44:53 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:44:55 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 23:44:57 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:44:59 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:45:01 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad)
2009-Mar-18 23:45:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 23:45:03 LOG4    check_wapp_levels: WAPP-1 power levels:    1.089  0.990    0.963  1.088
2009-Mar-18 23:45:03 LOG4    check_wapp_levels: WAPP-2 power levels:    0.895  1.028    0.943  0.944
2009-Mar-18 23:45:03 LOG4    check_wapp_levels: WAPP-3 power levels:    0.975  1.098    0.949  1.059
2009-Mar-18 23:45:03 LOG4    check_wapp_levels: WAPP-4 power levels:    1.021  0.108    0.903  0.118
2009-Mar-18 23:45:05 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:45:07 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 23:45:09 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:45:11 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:45:13 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 23:45:15 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:45:17 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:45:19 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad)
2009-Mar-18 23:45:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:45:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad)
2009-Mar-18 23:45:25 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad)
2009-Mar-18 23:45:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:45:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:45:31 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 23:45:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 23:45:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad)
2009-Mar-18 23:45:37 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 23:45:39 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:45:42 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:45:44 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 23:45:46 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 23:45:48 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 23:45:50 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:45:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:45:54 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:45:56 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 23:45:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 23:46:00 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 23:46:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 23:46:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 23:46:04 LOG4    check_wapp_levels: WAPP-1 power levels:    1.087  0.989    0.962  1.086
2009-Mar-18 23:46:04 LOG4    check_wapp_levels: WAPP-2 power levels:    0.896  1.028    0.943  0.942
2009-Mar-18 23:46:04 LOG4    check_wapp_levels: WAPP-3 power levels:    0.979  1.102    0.953  1.064
2009-Mar-18 23:46:04 LOG4    check_wapp_levels: WAPP-4 power levels:    1.023  0.108    0.905  0.118
2009-Mar-18 23:46:06 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 23:46:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 23:46:10 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 23:46:12 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 23:46:14 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 23:46:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.123 (still bad)
2009-Mar-18 23:46:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.141 (still bad)
2009-Mar-18 23:46:20 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.160 (still bad)
2009-Mar-18 23:46:22 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.173 (still bad)
2009-Mar-18 23:46:24 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.185 (still bad)
2009-Mar-18 23:46:26 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.191 (still bad)
2009-Mar-18 23:46:28 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.187 (still bad)
2009-Mar-18 23:46:30 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.178 (still bad)
2009-Mar-18 23:46:32 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.168 (still bad)
2009-Mar-18 23:46:34 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.146 (still bad)
2009-Mar-18 23:46:36 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 23:46:38 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.120 (still bad)
2009-Mar-18 23:46:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 23:46:42 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 23:46:44 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 23:46:46 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 23:46:48 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 23:46:50 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 23:46:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 23:46:54 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 23:46:56 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 23:46:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:47:00 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:47:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad)
2009-Mar-18 23:47:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 23:47:05 LOG4    check_wapp_levels: WAPP-1 power levels:    1.086  0.990    0.963  1.085
2009-Mar-18 23:47:05 LOG4    check_wapp_levels: WAPP-2 power levels:    0.901  1.037    0.957  0.955
2009-Mar-18 23:47:05 LOG4    check_wapp_levels: WAPP-3 power levels:    0.976  1.098    0.950  1.060
2009-Mar-18 23:47:05 LOG4    check_wapp_levels: WAPP-4 power levels:    1.019  0.108    0.901  0.118
2009-Mar-18 23:47:07 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:47:09 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 23:47:11 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:47:13 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:47:15 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:47:17 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:47:19 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:47:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 23:47:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad)
2009-Mar-18 23:47:25 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:47:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 23:47:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:47:31 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad)
2009-Mar-18 23:47:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 23:47:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:47:37 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:47:39 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 23:47:41 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:47:43 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:47:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 23:47:47 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:47:49 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:47:51 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 23:47:53 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:47:55 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:47:57 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 23:47:59 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad)
2009-Mar-18 23:48:01 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad)
2009-Mar-18 23:48:03 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.119 (still bad)
2009-Mar-18 23:48:05 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.125 (still bad)
2009-Mar-18 23:48:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 23:48:07 LOG4    check_wapp_levels: WAPP-1 power levels:    1.088  0.993    0.999  1.129
2009-Mar-18 23:48:07 LOG4    check_wapp_levels: WAPP-2 power levels:    0.897  1.030    0.945  0.944
2009-Mar-18 23:48:07 LOG4    check_wapp_levels: WAPP-3 power levels:    0.977  1.099    0.950  1.061
2009-Mar-18 23:48:07 LOG4    check_wapp_levels: WAPP-4 power levels:    1.025  0.108    0.905  0.119
2009-Mar-18 23:48:09 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.128 (still bad)
2009-Mar-18 23:48:11 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.121 (still bad)
2009-Mar-18 23:48:13 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.116 (still bad)
2009-Mar-18 23:48:15 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 23:48:17 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:48:19 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 23:48:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 23:48:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad)
2009-Mar-18 23:48:25 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad)
2009-Mar-18 23:48:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:48:30 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:48:32 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad)
2009-Mar-18 23:48:34 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad)
2009-Mar-18 23:48:36 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad)
2009-Mar-18 23:48:38 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:48:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:48:42 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:48:44 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:48:46 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:48:48 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:48:50 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:48:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad)
2009-Mar-18 23:48:54 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:48:56 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:48:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:49:00 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:49:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:49:04 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:49:06 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:49:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 23:49:08 LOG4    check_wapp_levels: WAPP-1 power levels:    1.094  0.994    0.969  1.092
2009-Mar-18 23:49:08 LOG4    check_wapp_levels: WAPP-2 power levels:    0.900  1.032    0.946  0.943
2009-Mar-18 23:49:08 LOG4    check_wapp_levels: WAPP-3 power levels:    0.980  1.100    0.954  1.064
2009-Mar-18 23:49:08 LOG4    check_wapp_levels: WAPP-4 power levels:    1.028  0.108    0.907  0.119
2009-Mar-18 23:49:10 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:49:12 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:49:14 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:49:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:49:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.095 (still bad)
2009-Mar-18 23:49:20 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad)
2009-Mar-18 23:49:22 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:49:24 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:49:26 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:49:28 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:49:30 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:49:32 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:49:34 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:49:36 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:49:38 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:49:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:49:42 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:49:44 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 23:49:46 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 23:49:48 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 23:49:50 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 23:49:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.112 (still bad)
2009-Mar-18 23:49:55 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.111 (still bad)
2009-Mar-18 23:49:57 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.117 (still bad)
2009-Mar-18 23:49:59 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 23:50:01 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 23:50:03 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:50:05 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad)
2009-Mar-18 23:50:07 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:50:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 23:50:09 LOG4    check_wapp_levels: WAPP-1 power levels:    1.096  0.999    0.969  1.096
2009-Mar-18 23:50:09 LOG4    check_wapp_levels: WAPP-2 power levels:    0.901  1.036    0.959  0.958
2009-Mar-18 23:50:09 LOG4    check_wapp_levels: WAPP-3 power levels:    0.977  1.099    0.954  1.065
2009-Mar-18 23:50:09 LOG4    check_wapp_levels: WAPP-4 power levels:    1.022  0.108    0.903  0.118
2009-Mar-18 23:50:11 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:50:13 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:50:15 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:50:17 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad)
2009-Mar-18 23:50:19 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:50:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:50:23 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad)
2009-Mar-18 23:50:25 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:50:27 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:50:29 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:50:31 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:50:33 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 23:50:35 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 23:50:37 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 23:50:39 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad)
2009-Mar-18 23:50:41 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 23:50:43 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.110 (still bad)
2009-Mar-18 23:50:45 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.114 (still bad)
2009-Mar-18 23:50:47 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 23:50:49 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 23:50:51 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 23:50:53 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:50:55 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad)
2009-Mar-18 23:50:57 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad)
2009-Mar-18 23:50:59 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad)
2009-Mar-18 23:51:01 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad)
2009-Mar-18 23:51:03 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:51:05 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:51:07 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad)
2009-Mar-18 23:51:09 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.106 (still bad)
2009-Mar-18 23:51:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 23:51:11 LOG4    check_wapp_levels: WAPP-1 power levels:    1.089  0.993    0.962  1.087
2009-Mar-18 23:51:11 LOG4    check_wapp_levels: WAPP-2 power levels:    0.898  1.029    0.948  0.945
2009-Mar-18 23:51:11 LOG4    check_wapp_levels: WAPP-3 power levels:    0.978  1.101    0.962  1.073
2009-Mar-18 23:51:11 LOG4    check_wapp_levels: WAPP-4 power levels:    1.021  0.108    0.902  0.118
2009-Mar-18 23:51:13 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:51:15 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 23:51:17 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:51:20 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 23:51:22 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 23:51:24 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:51:26 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:51:28 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:51:30 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad)
2009-Mar-18 23:51:32 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad)
2009-Mar-18 23:51:34 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:51:36 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad)
2009-Mar-18 23:51:38 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.103 (still bad)
2009-Mar-18 23:51:40 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:51:42 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.104 (still bad)
2009-Mar-18 23:51:44 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 23:51:46 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.113 (still bad)
2009-Mar-18 23:51:48 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.108 (still bad)
2009-Mar-18 23:51:50 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.109 (still bad)
2009-Mar-18 23:51:52 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 23:51:54 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 23:51:56 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.107 (still bad)
2009-Mar-18 23:51:58 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.105 (still bad)
2009-Mar-18 23:52:00 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.101 (still bad)
2009-Mar-18 23:52:02 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad)
2009-Mar-18 23:52:04 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad)
2009-Mar-18 23:52:06 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.097 (still bad)
2009-Mar-18 23:52:08 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.102 (still bad)
2009-Mar-18 23:52:10 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:52:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.108 < 0.75)!
2009-Mar-18 23:52:12 LOG4    check_wapp_levels: WAPP-1 power levels:    1.085  0.992    0.964  1.086
2009-Mar-18 23:52:12 LOG4    check_wapp_levels: WAPP-2 power levels:    0.898  1.032    0.951  0.947
2009-Mar-18 23:52:12 LOG4    check_wapp_levels: WAPP-3 power levels:    0.978  1.096    0.952  1.058
2009-Mar-18 23:52:12 LOG4    check_wapp_levels: WAPP-4 power levels:    1.020  0.108    0.901  0.118
2009-Mar-18 23:52:14 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad)
2009-Mar-18 23:52:16 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad)
2009-Mar-18 23:52:18 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:52:19 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-18 23:52:19 STOP    end_task: Finishing task 'waiting on WAPP spectra' with status 'OK'
2009-Mar-18 23:52:19 LOG5    end_task: Level: (4)    ID = <10258>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:19 STOP    end_task: Finishing task 'WAPP spectral observation' with status 'OK'
2009-Mar-18 23:52:19 LOG5    end_task: Level: (3)    ID = <10257>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:19 STOP    finish_task: Finishing task 'fixed azimuth drift map'
2009-Mar-18 23:52:19 LOG5    finish_task: Level: (2)    ID = <10225>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:19 DONE    finish_task: DONE finished pattern: fixed azimuth drift map
2009-Mar-18 23:52:19 LOG4    send_obs_status: To obs_status: <1> ENDTASK Finished
2009-Mar-18 23:52:19 END     end_task: Finishing task 'fixed azimuth drift map' with status 'OK'
2009-Mar-18 23:52:19 LOG5    end_task: Level: (2)    ID = <10225>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:19 COMMAND run_command_line: EXECUTING command 33: 'ENDIF'
2009-Mar-18 23:52:19 NOTE    run_command_file: DONE with command file processing
2009-Mar-18 23:52:19 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Running Command File}
2009-Mar-18 23:52:19 STOP    finish_task: Finishing task 'running command file '090318.cmd''
2009-Mar-18 23:52:19 LOG5    finish_task: Level: (1)    ID = <10111>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:19 DONE    finish_task: DONE finished running: command file '090318.cmd'
2009-Mar-18 23:52:19 LOG4    send_obs_status: To obs_status: <1> ENDTASK Finished
2009-Mar-18 23:52:19 END     end_task: Finishing task 'running command file '090318.cmd'' with status 'OK'
2009-Mar-18 23:52:20 LOG5    end_task: Level: (1)    ID = <10111>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:21 INFO5   check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad)
2009-Mar-18 23:52:40 INFO1   CIMA-run_command_file: Transferring command file '090319a.cmd ' to executive ...
2009-Mar-18 23:52:41 LOG4    exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf}
2009-Mar-18 23:52:41 LOG4    exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5}
2009-Mar-18 23:52:41 LOG4    exec_msg: From OBSERVER: store_command_file_line 3 5 {CATALOG AGESFull.cat}
2009-Mar-18 23:52:41 LOG4    exec_msg: From OBSERVER: store_command_file_line 4 8 {IF LSTSLEW(AGESVC1A_p1_025) < 112330 THEN}
2009-Mar-18 23:52:41 LOG4    exec_msg: From OBSERVER: store_command_file_line 5 9 {FIXEDDRIFT az=310.34 alfaangle=61.7  epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p1_025 ra=120900.00 dec=82400.00}
2009-Mar-18 23:52:41 LOG4    exec_msg: From OBSERVER: store_command_file_line 6 12 {ENDIF}
2009-Mar-18 23:52:41 LOG4    exec_msg: From OBSERVER: store_command_file_line 7 15 {IF LSTSLEW(AGESVC1B_p2_051) < 114529 THEN}
2009-Mar-18 23:52:41 LOG4    exec_msg: From OBSERVER: store_command_file_line 8 16 {FIXEDDRIFT az=313.47 alfaangle=58.7  epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_051 ra=122900.00 dec=74500.00}
2009-Mar-18 23:52:41 LOG4    exec_msg: From OBSERVER: store_command_file_line 9 19 {ENDIF}
2009-Mar-18 23:52:41 LOG4    exec_msg: From OBSERVER: store_command_file_line 10 22 {IF LSTSLEW(AGESVC1B_p2_053) < 120829 THEN}
2009-Mar-18 23:52:41 LOG4    exec_msg: From OBSERVER: store_command_file_line 11 23 {FIXEDDRIFT az=333.82 alfaangle=40.9  epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_053 ra=122900.00 dec=74200.00}
2009-Mar-18 23:52:41 LOG4    exec_msg: From OBSERVER: store_command_file_line 12 26 {ENDIF}
2009-Mar-18 23:52:41 LOG4    exec_msg: From OBSERVER: store_command_file_line 13 29 {IF LSTSLEW(AGESVC1B_p2_055) < 123329 THEN}
2009-Mar-18 23:52:41 LOG4    exec_msg: From OBSERVER: store_command_file_line 14 30 {FIXEDDRIFT az=5.29   alfaangle=14.8  epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_055 ra=122900.00 dec=73900.00}
2009-Mar-18 23:52:41 LOG4    exec_msg: From OBSERVER: store_command_file_line 15 33 {ENDIF}
2009-Mar-18 23:52:41 LOG4    exec_msg: From OBSERVER: store_command_file_line 16 36 {IF LSTSLEW(AGESVC1B_p2_057) < 125629 THEN}
2009-Mar-18 23:52:41 LOG4    exec_msg: From OBSERVER: store_command_file_line 17 37 {FIXEDDRIFT az=32.15  alfaangle=-7.8  epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_057 ra=122900.00 dec=73600.00}
2009-Mar-18 23:52:41 LOG4    exec_msg: From OBSERVER: store_command_file_line 18 40 {ENDIF}
2009-Mar-18 23:52:41 LOG4    exec_msg: From OBSERVER: store_command_file_line 19 43 {IF LSTSLEW(AGESVC1B_p2_059) < 131929 THEN}
2009-Mar-18 23:52:41 LOG4    exec_msg: From OBSERVER: store_command_file_line 20 44 {FIXEDDRIFT az=49.85  alfaangle=-23.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_059 ra=122900.00 dec=73300.00}
2009-Mar-18 23:52:41 LOG4    exec_msg: From OBSERVER: store_command_file_line 21 47 {ENDIF}
2009-Mar-18 23:52:41 COMMAND CIMA-send_to_exec: Sending command to run command file
2009-Mar-18 23:52:41 LOG4    exec_msg: From OBSERVER: run_command_file 090319a.cmd  1 1 21
2009-Mar-18 23:52:41 LOG4    run_command_file: Calling 'run_command_file 090319a.cmd 1 1 21'
2009-Mar-18 23:52:41 BEGIN   begin_task: Starting task 'running command file '090319a.cmd''
2009-Mar-18 23:52:41 LOG5    begin_task: Level: (1)    ID = <10259>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:41 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Running Command File}    INFO {Running command file '090319a.cmd' ...}
2009-Mar-18 23:52:41 NOTE    run_command_file: Starting execution of command file '090319a.cmd' from line 1
2009-Mar-18 23:52:41 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf'
2009-Mar-18 23:52:41 LOG1    execute_load: Waiting for CIMA frontend to check the IF/LO file
2009-Mar-18 23:52:41 NOTE    CIMA-check_config_file: File 'ages_config.conf' contains an ALFA set-up which will be ignored!
2009-Mar-18 23:52:41 LOG4    exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok
2009-Mar-18 23:52:41 LOG1    execute_load: Waiting for CIMA frontend to load the IF/LO file
2009-Mar-18 23:52:41 NOTE    CIMA-load_config_file: Loading configuration file 'ages_config.conf'
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T"
2009-Mar-18 23:52:42 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1"
2009-Mar-18 23:52:43 LOG4    exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok
2009-Mar-18 23:52:43 BEGIN   begin_task: Starting task 'configuring IF/LO path'
2009-Mar-18 23:52:43 LOG5    begin_task: Level: (2)    ID = <10260>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:43 INFO1   config_iflo: Starting to configure IF/LO path for ALFA
2009-Mar-18 23:52:43 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT    BITMAP stat_iflo INFO {Setting up the IF/LO path ...}
2009-Mar-18 23:52:43 LOG1    config_iflo: Receiver ALFA already selected
2009-Mar-18 23:52:43 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-18 23:52:43 LOG3    socket_wait: To ALFAMON: NOISE ACTIVE
2009-Mar-18 23:52:43 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-18 23:52:43 LOG5    begin_task: Level: (3)    ID = <10261>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:45 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-18 23:52:45 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-18 23:52:45 LOG5    end_task: Level: (3)    ID = <10261>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:45 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-18 23:52:45 LOG3    to_alfamon: To ALFAMON: NOISE ACTIVE
2009-Mar-18 23:52:45 LOG3    config_iflo: Skipping filter command 'alfafb 1' since system already is properly set
2009-Mar-18 23:52:45 LOG3    send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set
2009-Mar-18 23:52:45 LOG5    send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable
2009-Mar-18 23:52:45 LOG5    send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable
2009-Mar-18 23:52:45 LOG3    send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set
2009-Mar-18 23:52:45 LOG3    send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set
2009-Mar-18 23:52:45 LOG3    send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set
2009-Mar-18 23:52:45 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0}
2009-Mar-18 23:52:45 LOG3    send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set
2009-Mar-18 23:52:45 LOG3    send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set
2009-Mar-18 23:52:45 LOG5    send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable
2009-Mar-18 23:52:45 LOG5    send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable
2009-Mar-18 23:52:45 LOG5    send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable
2009-Mar-18 23:52:45 LOG5    send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable
2009-Mar-18 23:52:45 LOG5    send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable
2009-Mar-18 23:52:45 LOG3    send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set
2009-Mar-18 23:52:45 LOG3    send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set
2009-Mar-18 23:52:45 LOG3    send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set
2009-Mar-18 23:52:45 LOG3    send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set
2009-Mar-18 23:52:45 LOG3    vw_send: To DATATAKING: if2 {if2_gain 8 8}
2009-Mar-18 23:52:45 LOG3    send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set
2009-Mar-18 23:52:45 LOG3    send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set
2009-Mar-18 23:52:45 LOG5    send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable
2009-Mar-18 23:52:45 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 23:52:45 LOG3    send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set
2009-Mar-18 23:52:45 LOG3    send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set
2009-Mar-18 23:52:45 LOG5    send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable
2009-Mar-18 23:52:45 LOG3    send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set
2009-Mar-18 23:52:45 LOG3    send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set
2009-Mar-18 23:52:45 LOG2    socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE'
2009-Mar-18 23:52:45 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 23:52:45 START   begin_task: Starting task 'waiting on configuring IF/LO path'
2009-Mar-18 23:52:45 LOG5    begin_task: Level: (3)    ID = <10262>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:45 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0}
2009-Mar-18 23:52:45 LOG4    got_cormsg: From DATATAKING: if2 {if2_gain 8 8}
2009-Mar-18 23:52:45 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-18 23:52:45 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 23:52:46 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:52:46 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:52:46 LOG4    got_cormsg: From DATATAKING: vw% DONE
2009-Mar-18 23:52:46 STOP    end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK'
2009-Mar-18 23:52:46 LOG5    end_task: Level: (3)    ID = <10262>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:46 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path'
2009-Mar-18 23:52:46 STOP    finish_task: Finishing task 'configuring IF/LO path'
2009-Mar-18 23:52:46 LOG5    finish_task: Level: (2)    ID = <10260>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:46 DONE    finish_task: DONE finished configuration: IF/LO path
2009-Mar-18 23:52:46 LOG4    send_obs_status: To obs_status: <1> ENDTASK Finished
2009-Mar-18 23:52:46 END     end_task: Finishing task 'configuring IF/LO path' with status 'OK'
2009-Mar-18 23:52:46 LOG5    end_task: Level: (2)    ID = <10260>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:46 BEGIN   begin_task: Starting task 'configuring WAPPs'
2009-Mar-18 23:52:46 LOG5    begin_task: Level: (2)    ID = <10263>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:46 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr    INFO {Configuring the WAPPs ...}
2009-Mar-18 23:52:46 INFO1   config_wapp_correlator: Starting to configure WAPP as correlator
2009-Mar-18 23:52:46 LOG2    set_cal_source: Setting cal signal control to the WAPPs
2009-Mar-18 23:52:46 START   begin_task: Starting task 'selecting calibration port'
2009-Mar-18 23:52:46 LOG5    begin_task: Level: (3)    ID = <10264>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:46 LOG3    vw_send: To DATATAKING: calport 3
2009-Mar-18 23:52:46 LOG2    socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE'
2009-Mar-18 23:52:46 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 23:52:46 START   begin_task: Starting task 'waiting on calport'
2009-Mar-18 23:52:46 LOG5    begin_task: Level: (4)    ID = <10265>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:46 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:52:46 LOG4    got_cormsg: From DATATAKING: calport 3
2009-Mar-18 23:52:46 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-18 23:52:46 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:52:46 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-18 23:52:46 STOP    end_task: Finishing task 'waiting on calport' with status 'OK'
2009-Mar-18 23:52:46 LOG5    end_task: Level: (4)    ID = <10265>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:46 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'calport'
2009-Mar-18 23:52:46 STOP    end_task: Finishing task 'selecting calibration port' with status 'OK'
2009-Mar-18 23:52:46 LOG5    end_task: Level: (3)    ID = <10264>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:46 LOG3    wapp_calcontrol: To CALCONTROL: CALOFF
2009-Mar-18 23:52:46 LOG3    sock_errsend: To CALCONTROL: CALOFF STATUS
2009-Mar-18 23:52:46 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-18 23:52:46 LOG5    begin_task: Level: (3)    ID = <10266>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:46 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:52:46 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-18 23:52:46 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x02
2009-Mar-18 23:52:46 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-18 23:52:46 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-18 23:52:46 LOG5    end_task: Level: (3)    ID = <10266>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:47 LOG3    send_to_one_wapp: To WAPPCON: VERBOSE 0
2009-Mar-18 23:52:47 LOG3    send_to_one_wapp: To WAPPCON2: VERBOSE 0
2009-Mar-18 23:52:47 LOG3    send_to_one_wapp: To WAPPCON3: VERBOSE 0
2009-Mar-18 23:52:47 LOG3    send_to_one_wapp: To WAPPCON4: VERBOSE 0
2009-Mar-18 23:52:47 LOG3    send_to_one_wapp: To WAPPCON: TIMEOUT 5
2009-Mar-18 23:52:47 LOG3    send_to_one_wapp: To WAPPCON2: TIMEOUT 5
2009-Mar-18 23:52:47 LOG3    send_to_one_wapp: To WAPPCON3: TIMEOUT 5
2009-Mar-18 23:52:47 LOG3    send_to_one_wapp: To WAPPCON4: TIMEOUT 5
2009-Mar-18 23:52:47 LOG3    send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin
2009-Mar-18 23:52:47 LOG3    send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin
2009-Mar-18 23:52:47 LOG3    send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin
2009-Mar-18 23:52:47 LOG3    send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin
2009-Mar-18 23:52:47 LOG3    wapp_calcontrol: To CALCONTROL: TRIGCLOCK
2009-Mar-18 23:52:47 LOG3    sock_errsend: To CALCONTROL: TRIGCLOCK STATUS
2009-Mar-18 23:52:47 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-18 23:52:47 LOG5    begin_task: Level: (3)    ID = <10267>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:47 LOG4    WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0'
2009-Mar-18 23:52:47 LOG4    WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5'
2009-Mar-18 23:52:47 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-18 23:52:47 LOG4    WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin'
2009-Mar-18 23:52:47 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x02
2009-Mar-18 23:52:47 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-18 23:52:47 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-18 23:52:47 LOG5    end_task: Level: (3)    ID = <10267>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:47 LOG3    sock_errsend: To WAPPDATA: FLUSH
2009-Mar-18 23:52:47 STOP    finish_task: Finishing task 'configuring WAPPs'
2009-Mar-18 23:52:47 LOG5    finish_task: Level: (2)    ID = <10263>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:47 DONE    finish_task: DONE finished configuring: the WAPPs in ALFA mode
2009-Mar-18 23:52:47 LOG4    send_obs_status: To obs_status: <1> ENDTASK Finished
2009-Mar-18 23:52:47 END     end_task: Finishing task 'configuring WAPPs' with status 'OK'
2009-Mar-18 23:52:47 LOG5    end_task: Level: (2)    ID = <10263>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:47 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5'
2009-Mar-18 23:52:47 COMMAND run_command_line: EXECUTING command 5: 'CATALOG AGESFull.cat'
2009-Mar-18 23:52:47 INFO1   execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat'
2009-Mar-18 23:52:47 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGESVC1A_p1_025) < 112330 THEN'
2009-Mar-18 23:52:47 INFO5   is_if_valid: Evaluating condition: LSTSLEW(AGESVC1A_p1_025) < 112330
2009-Mar-18 23:52:47 INFO5   is_if_valid: Condition parsed as: 11.353031999999999 < 11.391666666666666
2009-Mar-18 23:52:48 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=310.34 alfaangle=61.7  epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p1_025 ra=120900.00 dec=82400.00'
2009-Mar-18 23:52:48 LOG2    check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map'
2009-Mar-18 23:52:48 INFO1   WAPPDATA-flush_pending: WAPPDATA ready
2009-Mar-18 23:52:48 LOG4    exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok
2009-Mar-18 23:52:48 LOG1    fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 310.34 61.7 hcorcal 5 tracking no first 1 AGESVC1A_p1_025 120900.00 82400.00 J 8500.0 Heliocentric velocity(optical)'
2009-Mar-18 23:52:48 BEGIN   begin_task: Starting task 'fixed azimuth drift map'
2009-Mar-18 23:52:48 LOG5    begin_task: Level: (2)    ID = <10268>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:48 INFO4   begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_038'
2009-Mar-18 23:52:48 INFO1   fixed_driftmap: Starting pattern: Fixed azimuth drift map
2009-Mar-18 23:52:48 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1    INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p1_025}
2009-Mar-18 23:52:48 INFO3   fixed_driftmap: Sending telescope to Az = 310.34 and ZA = 15.00
2009-Mar-18 23:52:48 LOG3    track_source: Calling 'track_source AGESVC1A_p1_025 310.34 15.0006248248 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)'
2009-Mar-18 23:52:48 START   begin_task: Starting task 'sending tracking commands'
2009-Mar-18 23:52:48 LOG5    begin_task: Level: (3)    ID = <10269>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:48 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p1_025}    INFO {Slewing to source 'AGESVC1A_p1_025' ...}
2009-Mar-18 23:52:48 INFO1   track_source: Starting to track AGESVC1A_p1_025
2009-Mar-18 23:52:48 LOG3    vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p1_025"
2009-Mar-18 23:52:48 LOG3    vw_send: To DATATAKING: set ra 310.34
2009-Mar-18 23:52:48 LOG3    vw_send: To DATATAKING: set dec 15.0006248248
2009-Mar-18 23:52:48 LOG3    vw_send: To DATATAKING: pnt tr send
2009-Mar-18 23:52:48 LOG3    vw_send: To DATATAKING: pnt tr 310.34 15.0006248248 -CF
2009-Mar-18 23:52:48 LOG3    vw_send: To DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 23:52:48 STOP    finish_task: Finishing task 'sending tracking commands'
2009-Mar-18 23:52:48 LOG5    finish_task: Level: (3)    ID = <10269>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:48 INFO2   finish_task: DONE finished sending: tracking commands
2009-Mar-18 23:52:48 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 23:52:48 STOP    end_task: Finishing task 'sending tracking commands' with status 'OK'
2009-Mar-18 23:52:48 LOG5    end_task: Level: (3)    ID = <10269>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:48 START   begin_task: Starting task 'rotate ALFA to +61.7 degrees'
2009-Mar-18 23:52:48 LOG5    begin_task: Level: (3)    ID = <10270>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:48 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA}    INFO {Rotating ALFA to +61.7 degrees ...}
2009-Mar-18 23:52:48 INFO2   rotate_alfa: ALFA commanded to +61.7 degrees
2009-Mar-18 23:52:48 LOG3    sock_errsend: To ALFAMOTOR: POSITION 61.7 REPLY
2009-Mar-18 23:52:48 LOG4    send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...}
2009-Mar-18 23:52:48 START   begin_task: Starting task 'waiting on ALFA rotation'
2009-Mar-18 23:52:48 LOG5    begin_task: Level: (4)    ID = <10271>    Status = 0 0 0 0  ok
2009-Mar-18 23:52:48 LOG4    got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p1_025"
2009-Mar-18 23:52:48 LOG4    got_cormsg: From DATATAKING: set ra 310.34
2009-Mar-18 23:52:48 LOG4    got_cormsg: From DATATAKING: set dec 15.0006248248
2009-Mar-18 23:52:48 LOG4    got_cormsg: From DATATAKING: vw% 310.34
2009-Mar-18 23:52:48 LOG4    got_cormsg: From DATATAKING: vw% 15.0006248248
2009-Mar-18 23:52:48 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:52:48 LOG4    got_cormsg: From DATATAKING: pnt tr send
2009-Mar-18 23:52:48 LOG4    got_cormsg: From DATATAKING: pnt tr 310.34 15.0006248248 -CF
2009-Mar-18 23:52:48 LOG4    got_cormsg: From DATATAKING: dopsetvel 8500.0 hel
2009-Mar-18 23:52:48 LOG4    got_cormsg: From DATATAKING: vw% vw%
2009-Mar-18 23:52:48 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-18 23:54:12 LOG4    exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION"
2009-Mar-18 23:54:12 INFO3   alfa_motor: ALFA rotator in-position +61.70 degrees
2009-Mar-18 23:54:12 STOP    end_task: Finishing task 'waiting on ALFA rotation' with status 'OK'
2009-Mar-18 23:54:12 LOG5    end_task: Level: (4)    ID = <10271>    Status = 0 0 0 0  ok
2009-Mar-18 23:54:12 LOG4    send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy
2009-Mar-18 23:54:12 STOP    finish_task: Finishing task 'rotate ALFA to +61.7 degrees'
2009-Mar-18 23:54:12 LOG5    finish_task: Level: (3)    ID = <10270>    Status = 0 0 0 0  ok
2009-Mar-18 23:54:12 INFO2   finish_task: DONE finished configuration: rotating ALFA to +61.7 degrees
2009-Mar-18 23:54:12 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-18 23:54:12 STOP    end_task: Finishing task 'rotate ALFA to +61.7 degrees' with status 'OK'
2009-Mar-18 23:54:12 LOG5    end_task: Level: (3)    ID = <10270>    Status = 0 0 0 0  ok
2009-Mar-18 23:54:12 START   begin_task: Starting task 'waiting on telescope'
2009-Mar-18 23:54:12 LOG5    begin_task: Level: (3)    ID = <10272>    Status = 0 0 0 0  ok
2009-Mar-18 23:54:12 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew    INFO {Waiting for telescope to track source ...}
2009-Mar-18 23:54:12 LOG3    waittrk: Start waittrk 5
2009-Mar-18 23:54:12 START   begin_task: Starting task 'waiting on telescope movement'
2009-Mar-18 23:54:12 LOG5    begin_task: Level: (4)    ID = <10273>    Status = 0 0 0 0  ok
2009-Mar-18 23:54:17 STOP    end_task: Finishing task 'waiting on telescope movement' with status 'OK'
2009-Mar-18 23:54:17 LOG5    end_task: Level: (4)    ID = <10273>    Status = 0 0 0 0  ok
2009-Mar-18 23:54:17 START   begin_task: Starting task 'waiting on telescope on source'
2009-Mar-18 23:54:17 LOG5    begin_task: Level: (4)    ID = <10274>    Status = 0 0 0 0  ok
2009-Mar-19 00:01:02 STOP    end_task: Finishing task 'waiting on telescope on source' with status 'OK'
2009-Mar-19 00:01:02 LOG5    end_task: Level: (4)    ID = <10274>    Status = 0 0 0 0  ok
2009-Mar-19 00:01:02 LOG4    send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy
2009-Mar-19 00:01:02 INFO2   waittrk: Now tracking AGESVC1A_p1_025
2009-Mar-19 00:01:02 LOG4    waittrk: Current telescope position:  Az = 309.96  ZA = 15.00
2009-Mar-19 00:01:02 STOP    finish_task: Finishing task 'waiting on telescope'
2009-Mar-19 00:01:02 LOG5    finish_task: Level: (3)    ID = <10272>    Status = 0 0 0 0  ok
2009-Mar-19 00:01:02 INFO2   finish_task: DONE finished waiting: telescope on source
2009-Mar-19 00:01:02 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:01:02 STOP    end_task: Finishing task 'waiting on telescope' with status 'OK'
2009-Mar-19 00:01:02 LOG5    end_task: Level: (3)    ID = <10272>    Status = 0 0 0 0  ok
2009-Mar-19 00:01:02 START   begin_task: Starting task 'selecting calibration type'
2009-Mar-19 00:01:02 LOG5    begin_task: Level: (3)    ID = <10275>    Status = 0 0 0 0  ok
2009-Mar-19 00:01:02 LOG3    vw_send: To DATATAKING: setcal hcorcal
2009-Mar-19 00:01:03 LOG2    socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE'
2009-Mar-19 00:01:03 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-19 00:01:03 START   begin_task: Starting task 'waiting on setcal'
2009-Mar-19 00:01:03 LOG5    begin_task: Level: (4)    ID = <10276>    Status = 0 0 0 0  ok
2009-Mar-19 00:01:03 LOG4    got_cormsg: From DATATAKING: setcal hcorcal
2009-Mar-19 00:01:03 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-19 00:01:03 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:01:03 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-19 00:01:03 STOP    end_task: Finishing task 'waiting on setcal' with status 'OK'
2009-Mar-19 00:01:03 LOG5    end_task: Level: (4)    ID = <10276>    Status = 0 0 0 0  ok
2009-Mar-19 00:01:03 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'setcal'
2009-Mar-19 00:01:03 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-19 00:01:03 LOG3    socket_wait: To ALFAMON: CAL HI
2009-Mar-19 00:01:03 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-19 00:01:03 LOG5    begin_task: Level: (4)    ID = <10277>    Status = 0 0 0 0  ok
2009-Mar-19 00:01:03 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-19 00:01:03 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-19 00:01:03 LOG5    end_task: Level: (4)    ID = <10277>    Status = 0 0 0 0  ok
2009-Mar-19 00:01:03 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-19 00:01:03 LOG3    to_alfamon: To ALFAMON: CAL HI
2009-Mar-19 00:01:03 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-19 00:01:03 LOG3    socket_wait: To ALFAMON: NOISE ACTIVE
2009-Mar-19 00:01:03 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-19 00:01:03 LOG5    begin_task: Level: (4)    ID = <10278>    Status = 0 0 0 0  ok
2009-Mar-19 00:01:03 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:01:03 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-19 00:01:03 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-19 00:01:03 LOG5    end_task: Level: (4)    ID = <10278>    Status = 0 0 0 0  ok
2009-Mar-19 00:01:03 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-19 00:01:03 LOG3    to_alfamon: To ALFAMON: NOISE ACTIVE
2009-Mar-19 00:01:03 STOP    end_task: Finishing task 'selecting calibration type' with status 'OK'
2009-Mar-19 00:01:03 LOG5    end_task: Level: (3)    ID = <10275>    Status = 0 0 0 0  ok
2009-Mar-19 00:01:03 LOG4    send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time}
2009-Mar-19 00:01:03 INFO2   astwait: Waiting for 66 seconds from 04:01:03 to 04:02:09 UTC ...
2009-Mar-19 00:01:03 LOG4    send_obs_status: To obs_status: <1> TASKTIME 66 BITMAP stat_wait MESSAGE {Waiting ...}
2009-Mar-19 00:01:03 START   begin_task: Starting task 'waiting on waiting for AST time'
2009-Mar-19 00:01:03 LOG5    begin_task: Level: (3)    ID = <10279>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:09 STOP    end_task: Finishing task 'waiting on waiting for AST time' with status 'OK'
2009-Mar-19 00:02:09 LOG5    end_task: Level: (3)    ID = <10279>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:09 INFO3   astwait: Finished waiting
2009-Mar-19 00:02:09 LOG4    send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy
2009-Mar-19 00:02:09 LOG5    dopset_later: Calling 'dopset_later 61.42561535294292'
2009-Mar-19 00:02:09 INFO3   dopset_later: Setting Doppler correction for 00:03:09 (61.4 seconds from now)
2009-Mar-19 00:02:09 LOG5    antvel: Calling 'antvel 310.340000 15.000625 F 61.42561535294292'
2009-Mar-19 00:02:09 LOG2    antvel: Transforming current Az = 310.34  ZA = 15.00 to apparent RA = 12:09:30.3  Dec = +08:20:41.4
2009-Mar-19 00:02:09 LOG2    antvel: Parameters to Doppler: Heliocentric 14589 2009 78 0.0
2009-Mar-19 00:02:09 INFO5   antvel: Computed antenna velocity: -0.65130 km/s
2009-Mar-19 00:02:09 LOG3    dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-0.65130263070000005 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786
2009-Mar-19 00:02:09 INFO4   dopset_gen: New sky frequencies: 1381.246429 1381.246429 1381.246429 1381.246429 1381.246429 1381.246429 1381.246429 1381.246429 1381.246429
2009-Mar-19 00:02:09 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1381.246429 sky0=1381.246429 sky1=1381.246429 sky2=1381.246429 sky3=1381.246429 sky4=1381.246429 sky5=1381.246429 sky6=1381.246429 sky7=1381.246429 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-19 00:02:09 LOG2    dopset_gen: Result from 'sky2syn': 1631.246429 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-19 00:02:09 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1631246429.0}
2009-Mar-19 00:02:09 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-19 00:02:09 LOG4    send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation}
2009-Mar-19 00:02:09 INFO3   fixed_driftmap: Switching to tracking mode for calibration
2009-Mar-19 00:02:09 INFO5   fixed_driftmap: Tracking J2000 position:  RA = 12:08:03.6  Dec = +08:23:46.0
2009-Mar-19 00:02:09 LOG3    track_source: Calling 'track_source AGESVC1A_p1_025 120803.6 082346.0 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)'
2009-Mar-19 00:02:09 START   begin_task: Starting task 'sending tracking commands'
2009-Mar-19 00:02:09 LOG5    begin_task: Level: (3)    ID = <10280>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:09 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p1_025}    INFO {Slewing to source 'AGESVC1A_p1_025' ...}
2009-Mar-19 00:02:09 INFO1   track_source: Starting to track AGESVC1A_p1_025
2009-Mar-19 00:02:09 LOG3    vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p1_025"
2009-Mar-19 00:02:09 LOG3    vw_send: To DATATAKING: set ra 120803.6
2009-Mar-19 00:02:09 LOG3    vw_send: To DATATAKING: set dec 082346.0
2009-Mar-19 00:02:09 LOG3    vw_send: To DATATAKING: pnt tr send
2009-Mar-19 00:02:09 LOG3    vw_send: To DATATAKING: pnt tr 120803.6 082346.0 -CJ
2009-Mar-19 00:02:09 LOG3    vw_send: To DATATAKING: dopsetvel 8500.0 hel
2009-Mar-19 00:02:09 STOP    finish_task: Finishing task 'sending tracking commands'
2009-Mar-19 00:02:09 LOG5    finish_task: Level: (3)    ID = <10280>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:09 INFO2   finish_task: DONE finished sending: tracking commands
2009-Mar-19 00:02:09 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:02:09 STOP    end_task: Finishing task 'sending tracking commands' with status 'OK'
2009-Mar-19 00:02:09 LOG5    end_task: Level: (3)    ID = <10280>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:09 START   begin_task: Starting task 'waiting on telescope'
2009-Mar-19 00:02:09 LOG5    begin_task: Level: (3)    ID = <10281>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:09 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew    INFO {Waiting for telescope to track source ...}
2009-Mar-19 00:02:09 LOG3    waittrk: Start waittrk 5
2009-Mar-19 00:02:09 START   begin_task: Starting task 'waiting on telescope movement'
2009-Mar-19 00:02:09 LOG5    begin_task: Level: (4)    ID = <10282>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:09 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1631246429.0}
2009-Mar-19 00:02:09 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-19 00:02:09 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:02:09 LOG4    got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p1_025"
2009-Mar-19 00:02:09 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:02:09 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:02:09 LOG4    got_cormsg: From DATATAKING: set ra 120803.6
2009-Mar-19 00:02:09 LOG4    got_cormsg: From DATATAKING: set dec 082346.0
2009-Mar-19 00:02:09 LOG4    got_cormsg: From DATATAKING: pnt tr send
2009-Mar-19 00:02:09 LOG4    got_cormsg: From DATATAKING: pnt tr 120803.6 082346.0 -CJ
2009-Mar-19 00:02:09 LOG4    got_cormsg: From DATATAKING: 120803.6
2009-Mar-19 00:02:09 LOG4    got_cormsg: From DATATAKING: vw% 082346.0
2009-Mar-19 00:02:09 LOG4    got_cormsg: From DATATAKING: vw% vw% vw%
2009-Mar-19 00:02:09 LOG4    got_cormsg: From DATATAKING: dopsetvel 8500.0 hel
2009-Mar-19 00:02:09 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:02:14 STOP    end_task: Finishing task 'waiting on telescope movement' with status 'OK'
2009-Mar-19 00:02:14 LOG5    end_task: Level: (4)    ID = <10282>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:14 START   begin_task: Starting task 'waiting on telescope on source'
2009-Mar-19 00:02:14 LOG5    begin_task: Level: (4)    ID = <10283>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:16 STOP    end_task: Finishing task 'waiting on telescope on source' with status 'OK'
2009-Mar-19 00:02:16 LOG5    end_task: Level: (4)    ID = <10283>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:16 LOG4    send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy
2009-Mar-19 00:02:16 INFO2   waittrk: Now tracking AGESVC1A_p1_025
2009-Mar-19 00:02:16 LOG4    waittrk: Current telescope position:  Az = 310.01  ZA = 14.99
2009-Mar-19 00:02:16 STOP    finish_task: Finishing task 'waiting on telescope'
2009-Mar-19 00:02:16 LOG5    finish_task: Level: (3)    ID = <10281>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:16 INFO2   finish_task: DONE finished waiting: telescope on source
2009-Mar-19 00:02:16 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:02:16 STOP    end_task: Finishing task 'waiting on telescope' with status 'OK'
2009-Mar-19 00:02:16 LOG5    end_task: Level: (3)    ID = <10281>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:16 START   begin_task: Starting task 'adjusting WAPP power'
2009-Mar-19 00:02:16 LOG5    begin_task: Level: (3)    ID = <10284>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:16 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT    BITMAP stat_power INFO {Adjusting WAPP power ...}
2009-Mar-19 00:02:16 INFO2   adjust_power: Starting to adjust WAPP power
2009-Mar-19 00:02:16 LOG3    vw_send: To DATATAKING: adjpwrif2 
2009-Mar-19 00:02:17 LOG2    socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE'
2009-Mar-19 00:02:17 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-19 00:02:17 START   begin_task: Starting task 'waiting on adjpwrif2'
2009-Mar-19 00:02:17 LOG5    begin_task: Level: (4)    ID = <10285>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:17 LOG4    got_cormsg: From DATATAKING: adjpwrif2
2009-Mar-19 00:02:17 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-19 00:02:19 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:02:19 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-19 00:02:19 STOP    end_task: Finishing task 'waiting on adjpwrif2' with status 'OK'
2009-Mar-19 00:02:19 LOG5    end_task: Level: (4)    ID = <10285>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:19 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2'
2009-Mar-19 00:02:19 START   begin_task: Starting task 'adjusting WAPP power'
2009-Mar-19 00:02:19 LOG5    begin_task: Level: (4)    ID = <10286>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:19 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT    BITMAP stat_power INFO {Adjusting power ...}
2009-Mar-19 00:02:19 LOG3    sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-19 00:02:19 LOG3    sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-19 00:02:19 LOG3    sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-19 00:02:19 LOG3    sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-19 00:02:19 START   begin_task: Starting task 'waiting on adjust WAPP power'
2009-Mar-19 00:02:19 LOG5    begin_task: Level: (5)    ID = <10287>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:19 LOG4    WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1'
2009-Mar-19 00:02:19 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:02:20 INFO2   WAPP=1-auto_atten_dual: Attenuators beam 0:  7  6 dB  ---  beam 1:  7  7 dB
2009-Mar-19 00:02:20 INFO2   WAPP=3-auto_atten_dual: Attenuators beam 4:  3  1 dB  ---  beam 5:  6  4 dB
2009-Mar-19 00:02:20 INFO2   WAPP=2-auto_atten_dual: Attenuators beam 2:  7  4 dB  ---  beam 3:  4  3 dB
2009-Mar-19 00:02:20 INFO2   WAPP=4-auto_atten_dual: Attenuators beam 6:  3  0 dB  ---  beam 7:  2  0 dB
2009-Mar-19 00:02:20 INFO1   WAPP=1+2+3+4-adjust_power: DONE adjusting power
2009-Mar-19 00:02:20 STOP    end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK'
2009-Mar-19 00:02:20 LOG5    end_task: Level: (5)    ID = <10287>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:20 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 0:  1.070  1.000    ALFA beam 1:  0.974  0.938
2009-Mar-19 00:02:20 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 2:  0.918  1.084    ALFA beam 3:  0.981  0.951
2009-Mar-19 00:02:20 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 4:  0.983  1.071    ALFA beam 5:  0.909  1.030
2009-Mar-19 00:02:20 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 6:  1.001  0.110    ALFA beam 7:  1.106  0.121
2009-Mar-19 00:02:20 STOP    finish_task: Finishing task 'adjusting WAPP power'
2009-Mar-19 00:02:20 LOG5    finish_task: Level: (4)    ID = <10286>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:20 INFO3   finish_task: DONE finished adjusting: WAPP power
2009-Mar-19 00:02:20 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:02:20 STOP    end_task: Finishing task 'adjusting WAPP power' with status 'OK'
2009-Mar-19 00:02:20 LOG5    end_task: Level: (4)    ID = <10286>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:20 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_busy
2009-Mar-19 00:02:20 STOP    finish_task: Finishing task 'adjusting WAPP power'
2009-Mar-19 00:02:20 LOG5    finish_task: Level: (3)    ID = <10284>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:20 INFO2   finish_task: DONE finished adjusting: WAPP power levels
2009-Mar-19 00:02:20 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:02:20 STOP    end_task: Finishing task 'adjusting WAPP power' with status 'OK'
2009-Mar-19 00:02:20 LOG5    end_task: Level: (3)    ID = <10284>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:20 LOG3    send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin
2009-Mar-19 00:02:20 LOG3    send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin
2009-Mar-19 00:02:20 LOG3    send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin
2009-Mar-19 00:02:20 LOG3    send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin
2009-Mar-19 00:02:20 LOG2    take_cal: Calling 'take_cal hcorcal 5 0'
2009-Mar-19 00:02:20 START   begin_task: Starting task 'WAPP calibration'
2009-Mar-19 00:02:20 LOG5    begin_task: Level: (3)    ID = <10288>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:20 LOG4    send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration}    INFO {Making WAPP calibration ...}
2009-Mar-19 00:02:20 START   begin_task: Starting task 'selecting calibration type'
2009-Mar-19 00:02:20 LOG5    begin_task: Level: (4)    ID = <10289>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:20 LOG3    vw_send: To DATATAKING: setcal hcorcal
2009-Mar-19 00:02:20 LOG2    socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE'
2009-Mar-19 00:02:20 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-19 00:02:20 START   begin_task: Starting task 'waiting on setcal'
2009-Mar-19 00:02:20 LOG5    begin_task: Level: (5)    ID = <10290>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:20 LOG4    WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin'
2009-Mar-19 00:02:20 LOG4    got_cormsg: From DATATAKING: setcal hcorcal
2009-Mar-19 00:02:20 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-19 00:02:21 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:02:21 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-19 00:02:21 STOP    end_task: Finishing task 'waiting on setcal' with status 'OK'
2009-Mar-19 00:02:21 LOG5    end_task: Level: (5)    ID = <10290>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:21 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'setcal'
2009-Mar-19 00:02:21 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-19 00:02:21 LOG3    socket_wait: To ALFAMON: CAL HI
2009-Mar-19 00:02:21 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-19 00:02:21 LOG5    begin_task: Level: (5)    ID = <10291>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:21 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:02:21 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-19 00:02:21 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-19 00:02:21 LOG5    end_task: Level: (5)    ID = <10291>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:21 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-19 00:02:21 LOG3    to_alfamon: To ALFAMON: CAL HI
2009-Mar-19 00:02:21 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-19 00:02:21 LOG3    socket_wait: To ALFAMON: NOISE ACTIVE
2009-Mar-19 00:02:21 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-19 00:02:21 LOG5    begin_task: Level: (5)    ID = <10292>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:21 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-19 00:02:21 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-19 00:02:21 LOG5    end_task: Level: (5)    ID = <10292>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:21 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-19 00:02:21 LOG3    to_alfamon: To ALFAMON: NOISE ACTIVE
2009-Mar-19 00:02:21 STOP    end_task: Finishing task 'selecting calibration type' with status 'OK'
2009-Mar-19 00:02:21 LOG5    end_task: Level: (4)    ID = <10289>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:21 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...}
2009-Mar-19 00:02:21 LOG3    wapp_calcontrol: To CALCONTROL: CALON
2009-Mar-19 00:02:21 LOG3    sock_errsend: To CALCONTROL: CALON STATUS
2009-Mar-19 00:02:21 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-19 00:02:21 LOG5    begin_task: Level: (4)    ID = <10293>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:21 NOTE    WAPPDATA-new_file: New FITS file: wapp.20090319.a2048.0000.fits
2009-Mar-19 00:02:21 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-19 00:02:21 LOG4    send_obs_status: To obs_status: <0> FILENAME {wapp.20090319.a2048.0000.fits}
2009-Mar-19 00:02:21 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x03
2009-Mar-19 00:02:21 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-19 00:02:21 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-19 00:02:21 LOG5    end_task: Level: (4)    ID = <10293>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:21 LOG4    send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...}
2009-Mar-19 00:02:21 LOG4    take_data: Calling 'take_data 5 5 CAL ON -'
2009-Mar-19 00:02:21 START   begin_task: Starting task 'WAPP spectral observation'
2009-Mar-19 00:02:21 LOG5    begin_task: Level: (4)    ID = <10294>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:21 LOG5    log_alfabeam: Parameters: 12.134333333333334 8.3961111111111109 11.377913 2009.2135567977286 61.699913
2009-Mar-19 00:02:21 LOG4    log_alfabeam: ALFABEAM 0  12.134333333333325   8.396111111111109
2009-Mar-19 00:02:21 LOG4    log_alfabeam: ALFABEAM 1  12.132062612474988   8.493036612291098
2009-Mar-19 00:02:21 LOG4    log_alfabeam: ALFABEAM 2  12.127725622406837   8.428874466091218
2009-Mar-19 00:02:21 LOG4    log_alfabeam: ALFABEAM 3  12.129958526613267   8.331762508051261
2009-Mar-19 00:02:21 LOG4    log_alfabeam: ALFABEAM 4  12.136569321805096   8.298870239699909
2009-Mar-19 00:02:21 LOG4    log_alfabeam: ALFABEAM 5  12.140958366520222   8.363794479043033
2009-Mar-19 00:02:21 LOG4    log_alfabeam: ALFABEAM 6  12.138684526843663   8.460848709016343
2009-Mar-19 00:02:21 INFO2   take_data: Starting WAPP scan: 907800001
2009-Mar-19 00:02:22 LOG4    send_obs_status: To obs_status: <0> TASKTIME 5
2009-Mar-19 00:02:22 START   begin_task: Starting task 'waiting on WAPP spectra'
2009-Mar-19 00:02:22 LOG5    begin_task: Level: (5)    ID = <10295>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:22 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-19 00:02:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-19 00:02:22 LOG4    check_wapp_levels: WAPP-1 power levels:    1.070  1.000    0.974  0.938
2009-Mar-19 00:02:22 LOG4    check_wapp_levels: WAPP-2 power levels:    0.918  1.084    0.981  0.951
2009-Mar-19 00:02:22 LOG4    check_wapp_levels: WAPP-3 power levels:    0.983  1.071    0.909  1.030
2009-Mar-19 00:02:22 LOG4    check_wapp_levels: WAPP-4 power levels:    1.001  0.110    1.106  0.121
2009-Mar-19 00:02:22 INFO1   WAPP=1+2+3+4-start_spectra: start sec 14543.00
2009-Mar-19 00:02:28 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.246429 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-19 00:02:28 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.246429 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:02:28 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.246429 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:02:28 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.246429 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:02:28 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.246429 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:02:28 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.469 (still bad)
2009-Mar-19 00:02:28 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.246429 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:02:28 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.246429 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:02:28 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.246429 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-19 00:02:28 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.246429 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:02:28 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-19 00:02:28 STOP    end_task: Finishing task 'waiting on WAPP spectra' with status 'OK'
2009-Mar-19 00:02:28 LOG5    end_task: Level: (5)    ID = <10295>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:28 STOP    end_task: Finishing task 'WAPP spectral observation' with status 'OK'
2009-Mar-19 00:02:28 LOG5    end_task: Level: (4)    ID = <10294>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:28 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...}
2009-Mar-19 00:02:28 LOG3    wapp_calcontrol: To CALCONTROL: CALOFF
2009-Mar-19 00:02:28 LOG3    sock_errsend: To CALCONTROL: CALOFF STATUS
2009-Mar-19 00:02:28 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-19 00:02:28 LOG5    begin_task: Level: (4)    ID = <10296>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:29 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-19 00:02:29 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x02
2009-Mar-19 00:02:29 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-19 00:02:29 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-19 00:02:29 LOG5    end_task: Level: (4)    ID = <10296>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:29 LOG4    send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...}
2009-Mar-19 00:02:29 LOG4    take_data: Calling 'take_data 5 5 CAL OFF -'
2009-Mar-19 00:02:29 START   begin_task: Starting task 'WAPP spectral observation'
2009-Mar-19 00:02:29 LOG5    begin_task: Level: (4)    ID = <10297>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:29 LOG5    log_alfabeam: Parameters: 12.134333333333334 8.3961111111111109 11.380142 2009.2135570512332 61.699913
2009-Mar-19 00:02:29 LOG4    log_alfabeam: ALFABEAM 0  12.134333333333334   8.396111111111113
2009-Mar-19 00:02:29 LOG4    log_alfabeam: ALFABEAM 1  12.132071685696870   8.493083184335063
2009-Mar-19 00:02:29 LOG4    log_alfabeam: ALFABEAM 2  12.127728718700856   8.429011398912611
2009-Mar-19 00:02:29 LOG4    log_alfabeam: ALFABEAM 3  12.129952470646336   8.331853327727774
2009-Mar-19 00:02:29 LOG4    log_alfabeam: ALFABEAM 4  12.136560166449113   8.298823858680143
2009-Mar-19 00:02:29 LOG4    log_alfabeam: ALFABEAM 5  12.140955341555287   8.363657984301184
2009-Mar-19 00:02:29 LOG4    log_alfabeam: ALFABEAM 6  12.138690578034085   8.460759053697647
2009-Mar-19 00:02:29 INFO2   take_data: Starting WAPP scan: 907800002
2009-Mar-19 00:02:29 LOG4    send_obs_status: To obs_status: <0> TASKTIME 5
2009-Mar-19 00:02:29 START   begin_task: Starting task 'waiting on WAPP spectra'
2009-Mar-19 00:02:29 LOG5    begin_task: Level: (5)    ID = <10298>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:29 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-19 00:02:29 INFO1   WAPP=1+2+3+4-start_spectra: start sec 14550.00
2009-Mar-19 00:02:34 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.553 (still bad)
2009-Mar-19 00:02:35 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.246429 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-19 00:02:35 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.246429 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:02:35 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.246429 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:02:35 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.246429 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:02:35 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.246429 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:02:35 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.246429 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:02:35 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.246429 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:02:35 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.246429 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-19 00:02:35 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.246429 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:02:35 INFO1   WAPP=1+2+3+4-start_spectra: Skipping Tsys
2009-Mar-19 00:02:35 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-19 00:02:35 STOP    end_task: Finishing task 'waiting on WAPP spectra' with status 'OK'
2009-Mar-19 00:02:35 LOG5    end_task: Level: (5)    ID = <10298>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:35 STOP    end_task: Finishing task 'WAPP spectral observation' with status 'OK'
2009-Mar-19 00:02:35 LOG5    end_task: Level: (4)    ID = <10297>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:35 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_busy
2009-Mar-19 00:02:35 STOP    finish_task: Finishing task 'WAPP calibration'
2009-Mar-19 00:02:35 LOG5    finish_task: Level: (3)    ID = <10288>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:35 INFO2   finish_task: DONE finished calibration: WAPP calibration
2009-Mar-19 00:02:35 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:02:35 STOP    end_task: Finishing task 'WAPP calibration' with status 'OK'
2009-Mar-19 00:02:35 LOG5    end_task: Level: (3)    ID = <10288>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:36 LOG4    send_obs_status: To obs_status: <1> INFO {Returning to drift position}
2009-Mar-19 00:02:36 INFO4   fixed_driftmap: Sending telescope back to drift position Az = 310.34 and ZA = 15.00
2009-Mar-19 00:02:36 LOG3    track_source: Calling 'track_source AGESVC1A_p1_025 310.34 15.0006248248 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)'
2009-Mar-19 00:02:36 START   begin_task: Starting task 'sending tracking commands'
2009-Mar-19 00:02:36 LOG5    begin_task: Level: (3)    ID = <10299>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:36 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p1_025}    INFO {Slewing to source 'AGESVC1A_p1_025' ...}
2009-Mar-19 00:02:36 INFO1   track_source: Starting to track AGESVC1A_p1_025
2009-Mar-19 00:02:36 LOG3    vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p1_025"
2009-Mar-19 00:02:36 LOG3    vw_send: To DATATAKING: set ra 310.34
2009-Mar-19 00:02:36 LOG3    vw_send: To DATATAKING: set dec 15.0006248248
2009-Mar-19 00:02:36 LOG3    vw_send: To DATATAKING: pnt tr send
2009-Mar-19 00:02:36 LOG3    vw_send: To DATATAKING: pnt tr 310.34 15.0006248248 -CF
2009-Mar-19 00:02:36 LOG3    vw_send: To DATATAKING: dopsetvel 8500.0 hel
2009-Mar-19 00:02:36 STOP    finish_task: Finishing task 'sending tracking commands'
2009-Mar-19 00:02:36 LOG5    finish_task: Level: (3)    ID = <10299>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:36 INFO2   finish_task: DONE finished sending: tracking commands
2009-Mar-19 00:02:36 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:02:36 STOP    end_task: Finishing task 'sending tracking commands' with status 'OK'
2009-Mar-19 00:02:36 LOG5    end_task: Level: (3)    ID = <10299>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:36 LOG1    fixed_driftmap: Parameters: HA = -00:46:00.4  Start = 11:23:30.0  LST = 11:22:55.5  diff = 34.5 secs
2009-Mar-19 00:02:36 INFO2   fixed_driftmap: Waiting 32.5 seconds for RA 12:09:30
2009-Mar-19 00:02:36 INFO2   lstwait: Waiting for 32.4 secs from LST 11:22:56 to LST 11:23:28 ...
2009-Mar-19 00:02:36 LOG4    send_obs_status: To obs_status: <1> TASKTIME 32.432993541737929 BITMAP stat_wait MESSAGE {Waiting ...}
2009-Mar-19 00:02:36 START   begin_task: Starting task 'waiting on wait on LST'
2009-Mar-19 00:02:36 LOG5    begin_task: Level: (3)    ID = <10300>    Status = 0 0 0 0  ok
2009-Mar-19 00:02:36 LOG4    got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p1_025"
2009-Mar-19 00:02:36 LOG4    got_cormsg: From DATATAKING: set ra 310.34
2009-Mar-19 00:02:36 LOG4    got_cormsg: From DATATAKING: vw% 310.34
2009-Mar-19 00:02:36 LOG4    got_cormsg: From DATATAKING: 
2009-Mar-19 00:02:36 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:02:36 LOG4    got_cormsg: From DATATAKING: set dec 15.0006248248
2009-Mar-19 00:02:36 LOG4    got_cormsg: From DATATAKING: pnt tr send
2009-Mar-19 00:02:36 LOG4    got_cormsg: From DATATAKING: pnt tr 310.34 15.0006248248 -CF
2009-Mar-19 00:02:36 LOG4    got_cormsg: From DATATAKING: dopsetvel 8500.0 hel
2009-Mar-19 00:02:36 LOG4    got_cormsg: From DATATAKING: 15.0006248248
2009-Mar-19 00:02:36 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:02:36 LOG4    got_cormsg: From DATATAKING: vw% vw% vw%
2009-Mar-19 00:02:40 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:03:08 STOP    end_task: Finishing task 'waiting on wait on LST' with status 'OK'
2009-Mar-19 00:03:08 LOG5    end_task: Level: (3)    ID = <10300>    Status = 0 0 0 0  ok
2009-Mar-19 00:03:08 LOG4    lstwait: Finished waiting 0.57 seconds late
2009-Mar-19 00:03:08 INFO3   lstwait: Finished waiting
2009-Mar-19 00:03:08 LOG4    send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy
2009-Mar-19 00:03:08 INFO2   fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1
2009-Mar-19 00:03:08 LOG4    send_obs_status: To obs_status: <1> LOOP 1
2009-Mar-19 00:03:08 LOG4    send_obs_status: To obs_status: <1> INFO {Making drift scan}
2009-Mar-19 00:03:08 LOG4    send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...}
2009-Mar-19 00:03:08 LOG4    take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -'
2009-Mar-19 00:03:08 START   begin_task: Starting task 'WAPP spectral observation'
2009-Mar-19 00:03:08 LOG5    begin_task: Level: (3)    ID = <10301>    Status = 0 0 0 0  ok
2009-Mar-19 00:03:08 LOG5    log_alfabeam: Can't log alfabeam, not J2000
2009-Mar-19 00:03:08 INFO2   take_data: Starting WAPP scan: 907800003
2009-Mar-19 00:03:09 LOG4    send_obs_status: To obs_status: <0> TASKTIME 1200
2009-Mar-19 00:03:09 START   begin_task: Starting task 'waiting on WAPP spectra'
2009-Mar-19 00:03:09 LOG5    begin_task: Level: (4)    ID = <10302>    Status = 0 0 0 0  ok
2009-Mar-19 00:03:09 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-19 00:03:09 INFO1   WAPP=1+2+3+4-start_spectra: start sec 14590.00
2009-Mar-19 00:03:11 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.246429 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-19 00:03:11 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.246429 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:03:11 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.246429 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:03:11 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.246429 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:03:11 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.246429 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:03:11 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.246429 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:03:11 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.246429 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:03:11 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.246429 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-19 00:03:11 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.246429 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:03:11 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:03:13 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:03:15 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:03:17 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:03:19 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad)
2009-Mar-19 00:03:21 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:03:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-19 00:03:23 LOG4    check_wapp_levels: WAPP-1 power levels:    1.066  1.000    0.972  0.940
2009-Mar-19 00:03:23 LOG4    check_wapp_levels: WAPP-2 power levels:    0.919  1.083    0.986  0.957
2009-Mar-19 00:03:23 LOG4    check_wapp_levels: WAPP-3 power levels:    0.984  1.073    0.907  1.028
2009-Mar-19 00:03:23 LOG4    check_wapp_levels: WAPP-4 power levels:    0.999  0.110    1.104  0.121
2009-Mar-19 00:03:25 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad)
2009-Mar-19 00:03:27 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:03:29 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad)
2009-Mar-19 00:03:32 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad)
2009-Mar-19 00:03:34 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:03:36 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:03:38 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:03:40 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:03:42 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad)
2009-Mar-19 00:03:44 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:03:46 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:03:48 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:03:50 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad)
2009-Mar-19 00:03:52 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:03:54 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:03:56 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:03:58 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:04:00 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:04:02 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:04:04 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:04:06 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:04:08 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:04:10 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:04:12 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:04:14 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:04:16 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:04:18 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:04:20 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:04:22 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:04:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-19 00:04:24 LOG4    check_wapp_levels: WAPP-1 power levels:    1.067  0.999    0.971  0.939
2009-Mar-19 00:04:24 LOG4    check_wapp_levels: WAPP-2 power levels:    0.918  1.083    0.979  0.950
2009-Mar-19 00:04:24 LOG4    check_wapp_levels: WAPP-3 power levels:    0.988  1.078    0.908  1.026
2009-Mar-19 00:04:24 LOG4    check_wapp_levels: WAPP-4 power levels:    0.999  0.110    1.103  0.121
2009-Mar-19 00:04:26 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:04:28 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:04:30 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:04:32 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:04:34 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad)
2009-Mar-19 00:04:36 LOG3    WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964  diff = 2)!
2009-Mar-19 00:04:36 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:04:38 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:04:40 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad)
2009-Mar-19 00:04:42 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:04:44 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:04:46 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad)
2009-Mar-19 00:04:48 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:04:50 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:04:52 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:04:55 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:04:57 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:04:59 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:05:01 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:05:03 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:05:05 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:05:07 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:05:09 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:05:11 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:05:13 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:05:15 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:05:17 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad)
2009-Mar-19 00:05:19 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:05:21 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:05:23 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:05:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-19 00:05:25 LOG4    check_wapp_levels: WAPP-1 power levels:    1.066  0.997    0.972  0.938
2009-Mar-19 00:05:25 LOG4    check_wapp_levels: WAPP-2 power levels:    0.920  1.081    0.977  0.949
2009-Mar-19 00:05:25 LOG4    check_wapp_levels: WAPP-3 power levels:    0.980  1.070    0.907  1.028
2009-Mar-19 00:05:25 LOG4    check_wapp_levels: WAPP-4 power levels:    0.998  0.110    1.103  0.121
2009-Mar-19 00:05:27 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:05:29 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:05:31 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:05:33 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:05:35 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:05:37 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:05:39 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:05:41 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:05:43 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:05:45 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:05:47 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:05:49 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad)
2009-Mar-19 00:05:51 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:05:53 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:05:55 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:05:57 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:05:59 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:06:01 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:06:03 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:06:05 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad)
2009-Mar-19 00:06:07 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad)
2009-Mar-19 00:06:09 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:06:11 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:06:13 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad)
2009-Mar-19 00:06:15 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:06:17 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad)
2009-Mar-19 00:06:20 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:06:22 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:06:24 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:06:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-19 00:06:26 LOG4    check_wapp_levels: WAPP-1 power levels:    1.065  0.998    0.969  0.936
2009-Mar-19 00:06:26 LOG4    check_wapp_levels: WAPP-2 power levels:    0.917  1.078    0.978  0.951
2009-Mar-19 00:06:26 LOG4    check_wapp_levels: WAPP-3 power levels:    0.982  1.070    0.904  1.025
2009-Mar-19 00:06:26 LOG4    check_wapp_levels: WAPP-4 power levels:    1.000  0.110    1.103  0.121
2009-Mar-19 00:06:28 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:06:30 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:06:32 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:06:34 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:06:36 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:06:38 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:06:40 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:06:42 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:06:44 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:06:46 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:06:48 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:06:50 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad)
2009-Mar-19 00:06:52 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:06:54 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:06:56 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:06:58 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:07:00 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:07:02 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:07:04 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:07:06 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:07:08 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:07:10 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:07:12 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:07:14 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:07:16 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:07:18 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad)
2009-Mar-19 00:07:20 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:07:22 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:07:24 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:07:26 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:07:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-19 00:07:28 LOG4    check_wapp_levels: WAPP-1 power levels:    1.068  0.999    0.969  0.939
2009-Mar-19 00:07:28 LOG4    check_wapp_levels: WAPP-2 power levels:    0.918  1.080    0.977  0.951
2009-Mar-19 00:07:28 LOG4    check_wapp_levels: WAPP-3 power levels:    0.983  1.071    0.907  1.024
2009-Mar-19 00:07:28 LOG4    check_wapp_levels: WAPP-4 power levels:    1.002  0.110    1.105  0.121
2009-Mar-19 00:07:29 LOG3    WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964  diff = 2)!
2009-Mar-19 00:07:30 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:07:32 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:07:34 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad)
2009-Mar-19 00:07:36 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:07:38 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:07:41 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:07:43 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:07:45 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad)
2009-Mar-19 00:07:47 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad)
2009-Mar-19 00:07:49 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:07:51 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:07:53 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:07:55 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:07:57 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:07:59 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:08:01 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:08:03 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:08:05 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:08:07 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:08:09 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:08:11 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:08:13 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:08:15 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:08:17 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:08:19 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:08:21 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:08:23 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:08:25 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:08:27 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:08:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-19 00:08:29 LOG4    check_wapp_levels: WAPP-1 power levels:    1.063  1.001    0.969  0.941
2009-Mar-19 00:08:29 LOG4    check_wapp_levels: WAPP-2 power levels:    0.918  1.079    0.976  0.949
2009-Mar-19 00:08:29 LOG4    check_wapp_levels: WAPP-3 power levels:    0.979  1.065    0.905  1.024
2009-Mar-19 00:08:29 LOG4    check_wapp_levels: WAPP-4 power levels:    1.009  0.110    1.114  0.121
2009-Mar-19 00:08:31 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-19 00:08:33 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad)
2009-Mar-19 00:08:35 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-19 00:08:37 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-19 00:08:39 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:08:41 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-19 00:08:43 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-19 00:08:45 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.127 (still bad)
2009-Mar-19 00:08:47 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad)
2009-Mar-19 00:08:49 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad)
2009-Mar-19 00:08:51 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.149 (still bad)
2009-Mar-19 00:08:53 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.151 (still bad)
2009-Mar-19 00:08:55 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.150 (still bad)
2009-Mar-19 00:08:57 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.148 (still bad)
2009-Mar-19 00:08:59 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad)
2009-Mar-19 00:09:01 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad)
2009-Mar-19 00:09:03 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:09:05 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad)
2009-Mar-19 00:09:08 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:09:10 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:09:12 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad)
2009-Mar-19 00:09:14 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:09:16 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:09:18 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:09:20 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:09:22 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:09:24 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:09:26 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:09:28 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:09:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-19 00:09:30 LOG4    check_wapp_levels: WAPP-1 power levels:    1.065  0.999    0.972  0.943
2009-Mar-19 00:09:30 LOG4    check_wapp_levels: WAPP-2 power levels:    0.921  1.084    0.976  0.949
2009-Mar-19 00:09:30 LOG4    check_wapp_levels: WAPP-3 power levels:    0.979  1.069    0.909  1.026
2009-Mar-19 00:09:30 LOG4    check_wapp_levels: WAPP-4 power levels:    1.001  0.110    1.105  0.121
2009-Mar-19 00:09:32 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:09:34 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:09:36 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:09:38 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:09:40 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:09:42 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:09:44 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:09:46 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:09:48 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad)
2009-Mar-19 00:09:50 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:09:52 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:09:54 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad)
2009-Mar-19 00:09:56 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:09:58 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:10:00 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad)
2009-Mar-19 00:10:02 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad)
2009-Mar-19 00:10:04 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:10:06 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-19 00:10:08 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:10:10 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:10:12 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-19 00:10:14 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-19 00:10:16 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad)
2009-Mar-19 00:10:18 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad)
2009-Mar-19 00:10:20 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:10:22 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:10:24 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad)
2009-Mar-19 00:10:26 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-19 00:10:28 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:10:30 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-19 00:10:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:10:33 LOG4    check_wapp_levels: WAPP-1 power levels:    1.106  1.036    0.972  0.944
2009-Mar-19 00:10:33 LOG4    check_wapp_levels: WAPP-2 power levels:    0.923  1.085    0.979  0.950
2009-Mar-19 00:10:33 LOG4    check_wapp_levels: WAPP-3 power levels:    0.982  1.070    0.910  1.028
2009-Mar-19 00:10:33 LOG4    check_wapp_levels: WAPP-4 power levels:    1.003  0.111    1.106  0.121
2009-Mar-19 00:10:35 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:10:37 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:10:39 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:10:41 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:10:43 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad)
2009-Mar-19 00:10:45 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad)
2009-Mar-19 00:10:47 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.135 (still bad)
2009-Mar-19 00:10:49 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.139 (still bad)
2009-Mar-19 00:10:51 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.141 (still bad)
2009-Mar-19 00:10:53 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.135 (still bad)
2009-Mar-19 00:10:55 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad)
2009-Mar-19 00:10:57 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:10:59 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:11:01 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:11:03 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:11:05 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:11:07 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:11:09 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:11:11 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:11:13 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:11:15 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:11:17 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:11:19 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:11:21 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:11:23 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:11:25 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:11:27 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:11:29 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:11:31 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:11:33 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:11:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:11:35 LOG4    check_wapp_levels: WAPP-1 power levels:    1.066  0.999    0.972  0.945
2009-Mar-19 00:11:35 LOG4    check_wapp_levels: WAPP-2 power levels:    0.925  1.085    0.981  0.953
2009-Mar-19 00:11:35 LOG4    check_wapp_levels: WAPP-3 power levels:    0.981  1.067    0.909  1.028
2009-Mar-19 00:11:35 LOG4    check_wapp_levels: WAPP-4 power levels:    1.004  0.111    1.107  0.121
2009-Mar-19 00:11:37 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:11:39 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:11:41 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad)
2009-Mar-19 00:11:43 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad)
2009-Mar-19 00:11:45 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:11:47 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:11:49 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:11:51 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:11:53 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:11:55 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:11:56 LOG3    WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964  diff = 2)!
2009-Mar-19 00:11:57 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:12:00 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:12:02 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad)
2009-Mar-19 00:12:04 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:12:06 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:12:08 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad)
2009-Mar-19 00:12:10 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:12:12 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:12:14 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:12:16 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:12:18 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.104 (still bad)
2009-Mar-19 00:12:20 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad)
2009-Mar-19 00:12:22 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:12:24 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:12:26 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad)
2009-Mar-19 00:12:28 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:12:30 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad)
2009-Mar-19 00:12:32 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:12:34 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:12:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-19 00:12:36 LOG4    check_wapp_levels: WAPP-1 power levels:    1.061  0.995    0.971  0.945
2009-Mar-19 00:12:36 LOG4    check_wapp_levels: WAPP-2 power levels:    0.927  1.085    0.980  0.949
2009-Mar-19 00:12:36 LOG4    check_wapp_levels: WAPP-3 power levels:    0.981  1.067    0.910  1.026
2009-Mar-19 00:12:36 LOG4    check_wapp_levels: WAPP-4 power levels:    1.003  0.110    1.107  0.121
2009-Mar-19 00:12:38 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad)
2009-Mar-19 00:12:40 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:12:42 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:12:44 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:12:46 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:12:48 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:12:50 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:12:52 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:12:54 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad)
2009-Mar-19 00:12:56 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad)
2009-Mar-19 00:12:58 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:13:00 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:13:02 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:13:04 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:13:06 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:13:08 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:13:10 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:13:12 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:13:14 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:13:16 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:13:18 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:13:20 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:13:23 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:13:25 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad)
2009-Mar-19 00:13:27 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:13:29 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad)
2009-Mar-19 00:13:31 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:13:33 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:13:35 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:13:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-19 00:13:37 LOG4    check_wapp_levels: WAPP-1 power levels:    1.062  0.998    0.975  0.947
2009-Mar-19 00:13:37 LOG4    check_wapp_levels: WAPP-2 power levels:    0.926  1.087    0.979  0.948
2009-Mar-19 00:13:37 LOG4    check_wapp_levels: WAPP-3 power levels:    0.978  1.066    0.908  1.025
2009-Mar-19 00:13:37 LOG4    check_wapp_levels: WAPP-4 power levels:    1.003  0.110    1.106  0.121
2009-Mar-19 00:13:39 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:13:41 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:13:43 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:13:44 LOG3    WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964  diff = 2)!
2009-Mar-19 00:13:45 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:13:47 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:13:49 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad)
2009-Mar-19 00:13:51 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:13:53 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:13:55 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:13:57 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:13:59 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:14:01 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.104 (still bad)
2009-Mar-19 00:14:03 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:14:05 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.104 (still bad)
2009-Mar-19 00:14:07 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:14:09 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:14:11 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:14:13 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:14:15 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:14:17 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:14:19 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:14:21 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:14:23 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:14:25 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:14:27 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:14:29 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:14:31 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:14:33 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:14:35 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:14:37 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:14:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:14:39 LOG4    check_wapp_levels: WAPP-1 power levels:    1.066  1.001    0.972  0.945
2009-Mar-19 00:14:39 LOG4    check_wapp_levels: WAPP-2 power levels:    0.926  1.089    0.982  0.952
2009-Mar-19 00:14:39 LOG4    check_wapp_levels: WAPP-3 power levels:    0.981  1.067    0.911  1.027
2009-Mar-19 00:14:39 LOG4    check_wapp_levels: WAPP-4 power levels:    1.007  0.111    1.111  0.121
2009-Mar-19 00:14:41 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:14:43 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:14:45 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:14:47 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:14:49 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.104 (still bad)
2009-Mar-19 00:14:52 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:14:54 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:14:56 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:14:58 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:15:00 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:15:02 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:15:04 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:15:06 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad)
2009-Mar-19 00:15:08 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:15:10 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:15:12 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:15:14 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad)
2009-Mar-19 00:15:16 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:15:18 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:15:20 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:15:22 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:15:24 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:15:26 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:15:28 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:15:30 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:15:32 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:15:34 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:15:36 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:15:38 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:15:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:15:40 LOG4    check_wapp_levels: WAPP-1 power levels:    1.085  1.016    0.972  0.943
2009-Mar-19 00:15:40 LOG4    check_wapp_levels: WAPP-2 power levels:    0.926  1.086    0.983  0.957
2009-Mar-19 00:15:40 LOG4    check_wapp_levels: WAPP-3 power levels:    0.983  1.068    0.911  1.025
2009-Mar-19 00:15:40 LOG4    check_wapp_levels: WAPP-4 power levels:    1.005  0.111    1.109  0.122
2009-Mar-19 00:15:42 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad)
2009-Mar-19 00:15:44 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:15:46 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:15:48 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad)
2009-Mar-19 00:15:50 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:15:52 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:15:54 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:15:56 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad)
2009-Mar-19 00:15:58 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:16:00 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad)
2009-Mar-19 00:16:02 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad)
2009-Mar-19 00:16:04 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:16:06 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:16:08 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:16:10 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:16:12 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:16:14 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:16:16 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:16:19 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:16:21 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:16:23 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:16:25 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:16:27 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:16:29 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:16:31 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:16:33 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:16:35 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:16:37 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:16:39 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:16:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:16:41 LOG4    check_wapp_levels: WAPP-1 power levels:    1.069  1.001    0.972  0.945
2009-Mar-19 00:16:41 LOG4    check_wapp_levels: WAPP-2 power levels:    0.925  1.086    0.979  0.952
2009-Mar-19 00:16:41 LOG4    check_wapp_levels: WAPP-3 power levels:    0.982  1.071    0.909  1.029
2009-Mar-19 00:16:41 LOG4    check_wapp_levels: WAPP-4 power levels:    1.005  0.111    1.109  0.121
2009-Mar-19 00:16:43 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:16:45 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:16:47 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:16:49 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:16:51 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:16:53 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad)
2009-Mar-19 00:16:55 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad)
2009-Mar-19 00:16:57 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:16:59 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:17:01 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:17:03 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:17:05 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:17:07 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad)
2009-Mar-19 00:17:09 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad)
2009-Mar-19 00:17:11 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:17:13 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:17:15 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:17:17 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:17:19 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:17:21 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad)
2009-Mar-19 00:17:23 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:17:25 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad)
2009-Mar-19 00:17:27 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:17:29 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:17:31 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad)
2009-Mar-19 00:17:33 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:17:35 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:17:37 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:17:39 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad)
2009-Mar-19 00:17:41 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:17:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-19 00:17:44 LOG4    check_wapp_levels: WAPP-1 power levels:    1.064  1.004    0.972  0.944
2009-Mar-19 00:17:44 LOG4    check_wapp_levels: WAPP-2 power levels:    0.923  1.086    0.982  0.954
2009-Mar-19 00:17:44 LOG4    check_wapp_levels: WAPP-3 power levels:    0.982  1.070    0.908  1.026
2009-Mar-19 00:17:44 LOG4    check_wapp_levels: WAPP-4 power levels:    1.004  0.110    1.108  0.121
2009-Mar-19 00:17:46 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:17:48 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:17:50 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:17:52 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad)
2009-Mar-19 00:17:54 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:17:56 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad)
2009-Mar-19 00:17:58 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:18:00 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:18:02 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:18:04 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad)
2009-Mar-19 00:18:06 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:18:08 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:18:10 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:18:12 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:18:14 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:18:16 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:18:18 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:18:20 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:18:22 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:18:24 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:18:26 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:18:28 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:18:30 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:18:32 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:18:34 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:18:36 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:18:38 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:18:40 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:18:42 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:18:44 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:18:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:18:46 LOG4    check_wapp_levels: WAPP-1 power levels:    1.068  1.005    0.976  0.948
2009-Mar-19 00:18:46 LOG4    check_wapp_levels: WAPP-2 power levels:    0.929  1.091    0.982  0.954
2009-Mar-19 00:18:46 LOG4    check_wapp_levels: WAPP-3 power levels:    0.986  1.072    0.910  1.032
2009-Mar-19 00:18:46 LOG4    check_wapp_levels: WAPP-4 power levels:    1.008  0.111    1.114  0.122
2009-Mar-19 00:18:48 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:18:50 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:18:52 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:18:54 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:18:56 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:18:58 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:19:00 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:19:02 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:19:04 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:19:06 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:19:09 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:19:11 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:19:13 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:19:15 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:19:17 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:19:19 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:19:19 LOG3    WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964  diff = 2)!
2009-Mar-19 00:19:21 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:19:23 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:19:25 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:19:27 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:19:29 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:19:31 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:19:33 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:19:35 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:19:37 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:19:39 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:19:41 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:19:43 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:19:45 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:19:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:19:47 LOG4    check_wapp_levels: WAPP-1 power levels:    1.070  1.003    0.978  0.949
2009-Mar-19 00:19:47 LOG4    check_wapp_levels: WAPP-2 power levels:    0.932  1.095    0.986  0.959
2009-Mar-19 00:19:47 LOG4    check_wapp_levels: WAPP-3 power levels:    0.988  1.074    0.910  1.031
2009-Mar-19 00:19:47 LOG4    check_wapp_levels: WAPP-4 power levels:    1.009  0.111    1.115  0.122
2009-Mar-19 00:19:49 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:19:51 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:19:53 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:19:55 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:19:57 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:19:59 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:20:01 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:20:03 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:20:05 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:20:07 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:20:09 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:20:11 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:20:13 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:20:15 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:20:17 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:20:19 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:20:21 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:20:23 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:20:25 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:20:27 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:20:29 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:20:31 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:20:34 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:20:36 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:20:38 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:20:40 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:20:42 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:20:44 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:20:46 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:20:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:20:48 LOG4    check_wapp_levels: WAPP-1 power levels:    1.073  1.008    0.979  0.950
2009-Mar-19 00:20:48 LOG4    check_wapp_levels: WAPP-2 power levels:    0.935  1.098    0.987  0.959
2009-Mar-19 00:20:48 LOG4    check_wapp_levels: WAPP-3 power levels:    0.991  1.079    0.912  1.033
2009-Mar-19 00:20:48 LOG4    check_wapp_levels: WAPP-4 power levels:    1.011  0.111    1.117  0.122
2009-Mar-19 00:20:50 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:20:52 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:20:54 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:20:56 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:20:58 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:21:00 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:21:02 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:21:04 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:21:06 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:21:08 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:21:10 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:21:12 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:21:14 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:21:16 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:21:18 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:21:20 LOG3    WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964  diff = 2)!
2009-Mar-19 00:21:20 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:21:22 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:21:24 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:21:26 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:21:28 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:21:29 LOG3    WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964  diff = 2)!
2009-Mar-19 00:21:30 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:21:32 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:21:34 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:21:36 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:21:38 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:21:40 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:21:42 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:21:44 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:21:46 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:21:48 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:21:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:21:50 LOG4    check_wapp_levels: WAPP-1 power levels:    1.067  1.004    0.974  0.945
2009-Mar-19 00:21:50 LOG4    check_wapp_levels: WAPP-2 power levels:    0.929  1.090    0.979  0.952
2009-Mar-19 00:21:50 LOG4    check_wapp_levels: WAPP-3 power levels:    0.990  1.072    0.909  1.024
2009-Mar-19 00:21:50 LOG4    check_wapp_levels: WAPP-4 power levels:    1.004  0.111    1.109  0.122
2009-Mar-19 00:21:52 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:21:54 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:21:56 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:21:58 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:22:01 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:22:03 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:22:05 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:22:07 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:22:09 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:22:11 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:22:13 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:22:15 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:22:17 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:22:19 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad)
2009-Mar-19 00:22:21 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:22:23 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:22:25 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:22:27 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:22:29 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:22:31 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:22:33 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:22:35 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:22:37 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:22:39 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:22:41 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:22:43 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:22:45 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:22:47 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:22:49 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:22:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:22:51 LOG4    check_wapp_levels: WAPP-1 power levels:    1.066  1.007    0.973  0.943
2009-Mar-19 00:22:51 LOG4    check_wapp_levels: WAPP-2 power levels:    0.930  1.094    0.981  0.952
2009-Mar-19 00:22:51 LOG4    check_wapp_levels: WAPP-3 power levels:    0.990  1.075    0.909  1.025
2009-Mar-19 00:22:51 LOG4    check_wapp_levels: WAPP-4 power levels:    1.007  0.111    1.111  0.121
2009-Mar-19 00:22:53 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:22:55 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:22:57 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:22:59 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:23:01 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:23:03 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:23:05 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:23:07 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:23:09 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:23:10 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-19 00:23:10 STOP    end_task: Finishing task 'waiting on WAPP spectra' with status 'OK'
2009-Mar-19 00:23:10 LOG5    end_task: Level: (4)    ID = <10302>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:10 STOP    end_task: Finishing task 'WAPP spectral observation' with status 'OK'
2009-Mar-19 00:23:10 LOG5    end_task: Level: (3)    ID = <10301>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:10 STOP    finish_task: Finishing task 'fixed azimuth drift map'
2009-Mar-19 00:23:10 LOG5    finish_task: Level: (2)    ID = <10268>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:10 DONE    finish_task: DONE finished pattern: fixed azimuth drift map
2009-Mar-19 00:23:10 LOG4    send_obs_status: To obs_status: <1> ENDTASK Finished
2009-Mar-19 00:23:10 END     end_task: Finishing task 'fixed azimuth drift map' with status 'OK'
2009-Mar-19 00:23:10 LOG5    end_task: Level: (2)    ID = <10268>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:10 COMMAND run_command_line: EXECUTING command 12: 'ENDIF'
2009-Mar-19 00:23:10 COMMAND run_command_line: EXECUTING command 15: 'IF LSTSLEW(AGESVC1B_p2_051) < 114529 THEN'
2009-Mar-19 00:23:11 INFO5   is_if_valid: Evaluating condition: LSTSLEW(AGESVC1B_p2_051) < 114529
2009-Mar-19 00:23:11 INFO5   is_if_valid: Condition parsed as: 11.729419333333334 < 11.758055555555556
2009-Mar-19 00:23:11 COMMAND run_command_line: EXECUTING command 16: 'FIXEDDRIFT az=313.47 alfaangle=58.7  epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_051 ra=122900.00 dec=74500.00'
2009-Mar-19 00:23:11 LOG2    check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map'
2009-Mar-19 00:23:11 LOG4    exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok
2009-Mar-19 00:23:11 LOG1    fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 313.47 58.7 hcorcal 5 tracking no first 1 AGESVC1B_p2_051 122900.00 74500.00 J 8500.0 Heliocentric velocity(optical)'
2009-Mar-19 00:23:11 BEGIN   begin_task: Starting task 'fixed azimuth drift map'
2009-Mar-19 00:23:11 LOG5    begin_task: Level: (2)    ID = <10303>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:11 INFO4   begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p1_025'
2009-Mar-19 00:23:11 INFO1   fixed_driftmap: Starting pattern: Fixed azimuth drift map
2009-Mar-19 00:23:11 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1    INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p2_051}
2009-Mar-19 00:23:11 INFO3   fixed_driftmap: Sending telescope to Az = 313.47 and ZA = 15.10
2009-Mar-19 00:23:11 LOG3    track_source: Calling 'track_source AGESVC1B_p2_051 313.47 15.1006557605 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)'
2009-Mar-19 00:23:11 START   begin_task: Starting task 'sending tracking commands'
2009-Mar-19 00:23:11 LOG5    begin_task: Level: (3)    ID = <10304>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:11 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_051}    INFO {Slewing to source 'AGESVC1B_p2_051' ...}
2009-Mar-19 00:23:11 INFO1   track_source: Starting to track AGESVC1B_p2_051
2009-Mar-19 00:23:11 LOG3    vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_051"
2009-Mar-19 00:23:11 LOG3    vw_send: To DATATAKING: set ra 313.47
2009-Mar-19 00:23:11 LOG3    vw_send: To DATATAKING: set dec 15.1006557605
2009-Mar-19 00:23:11 LOG3    vw_send: To DATATAKING: pnt tr send
2009-Mar-19 00:23:11 LOG3    vw_send: To DATATAKING: pnt tr 313.47 15.1006557605 -CF
2009-Mar-19 00:23:11 LOG3    vw_send: To DATATAKING: dopsetvel 8500.0 hel
2009-Mar-19 00:23:11 STOP    finish_task: Finishing task 'sending tracking commands'
2009-Mar-19 00:23:11 LOG5    finish_task: Level: (3)    ID = <10304>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:11 INFO2   finish_task: DONE finished sending: tracking commands
2009-Mar-19 00:23:11 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:23:11 STOP    end_task: Finishing task 'sending tracking commands' with status 'OK'
2009-Mar-19 00:23:11 LOG5    end_task: Level: (3)    ID = <10304>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:11 START   begin_task: Starting task 'rotate ALFA to +58.7 degrees'
2009-Mar-19 00:23:11 LOG5    begin_task: Level: (3)    ID = <10305>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:11 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA}    INFO {Rotating ALFA to +58.7 degrees ...}
2009-Mar-19 00:23:11 INFO2   rotate_alfa: ALFA commanded to +58.7 degrees
2009-Mar-19 00:23:11 LOG3    sock_errsend: To ALFAMOTOR: POSITION 58.7 REPLY
2009-Mar-19 00:23:11 LOG4    send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...}
2009-Mar-19 00:23:11 START   begin_task: Starting task 'waiting on ALFA rotation'
2009-Mar-19 00:23:11 LOG5    begin_task: Level: (4)    ID = <10306>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:11 LOG4    got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_051"
2009-Mar-19 00:23:11 LOG4    got_cormsg: From DATATAKING: set ra 313.47
2009-Mar-19 00:23:11 LOG4    got_cormsg: From DATATAKING: set dec 15.1006557605
2009-Mar-19 00:23:11 LOG4    got_cormsg: From DATATAKING: vw% 313.47
2009-Mar-19 00:23:12 LOG4    got_cormsg: From DATATAKING: vw% 15.1006557605
2009-Mar-19 00:23:12 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:23:12 LOG4    got_cormsg: From DATATAKING: pnt tr send
2009-Mar-19 00:23:12 LOG4    got_cormsg: From DATATAKING: pnt tr 313.47 15.1006557605 -CF
2009-Mar-19 00:23:12 LOG4    got_cormsg: From DATATAKING: dopsetvel 8500.0 hel
2009-Mar-19 00:23:12 LOG4    got_cormsg: From DATATAKING: vw% vw%
2009-Mar-19 00:23:12 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:23:12 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:23:14 LOG4    exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION"
2009-Mar-19 00:23:14 INFO3   alfa_motor: ALFA rotator in-position +58.70 degrees
2009-Mar-19 00:23:14 STOP    end_task: Finishing task 'waiting on ALFA rotation' with status 'OK'
2009-Mar-19 00:23:14 LOG5    end_task: Level: (4)    ID = <10306>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:14 LOG4    send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy
2009-Mar-19 00:23:14 STOP    finish_task: Finishing task 'rotate ALFA to +58.7 degrees'
2009-Mar-19 00:23:14 LOG5    finish_task: Level: (3)    ID = <10305>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:14 INFO2   finish_task: DONE finished configuration: rotating ALFA to +58.7 degrees
2009-Mar-19 00:23:14 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:23:14 STOP    end_task: Finishing task 'rotate ALFA to +58.7 degrees' with status 'OK'
2009-Mar-19 00:23:14 LOG5    end_task: Level: (3)    ID = <10305>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:15 START   begin_task: Starting task 'waiting on telescope'
2009-Mar-19 00:23:15 LOG5    begin_task: Level: (3)    ID = <10307>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:15 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew    INFO {Waiting for telescope to track source ...}
2009-Mar-19 00:23:15 LOG3    waittrk: Start waittrk 5
2009-Mar-19 00:23:15 START   begin_task: Starting task 'waiting on telescope movement'
2009-Mar-19 00:23:15 LOG5    begin_task: Level: (4)    ID = <10308>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:20 STOP    end_task: Finishing task 'waiting on telescope movement' with status 'OK'
2009-Mar-19 00:23:20 LOG5    end_task: Level: (4)    ID = <10308>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:20 START   begin_task: Starting task 'waiting on telescope on source'
2009-Mar-19 00:23:20 LOG5    begin_task: Level: (4)    ID = <10309>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:35 STOP    end_task: Finishing task 'waiting on telescope on source' with status 'OK'
2009-Mar-19 00:23:35 LOG5    end_task: Level: (4)    ID = <10309>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:35 LOG4    send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy
2009-Mar-19 00:23:35 INFO2   waittrk: Now tracking AGESVC1B_p2_051
2009-Mar-19 00:23:35 LOG4    waittrk: Current telescope position:  Az = 313.09  ZA = 15.09
2009-Mar-19 00:23:35 STOP    finish_task: Finishing task 'waiting on telescope'
2009-Mar-19 00:23:35 LOG5    finish_task: Level: (3)    ID = <10307>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:35 INFO2   finish_task: DONE finished waiting: telescope on source
2009-Mar-19 00:23:35 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:23:35 STOP    end_task: Finishing task 'waiting on telescope' with status 'OK'
2009-Mar-19 00:23:35 LOG5    end_task: Level: (3)    ID = <10307>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:35 START   begin_task: Starting task 'selecting calibration type'
2009-Mar-19 00:23:35 LOG5    begin_task: Level: (3)    ID = <10310>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:35 LOG3    vw_send: To DATATAKING: setcal hcorcal
2009-Mar-19 00:23:35 LOG2    socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE'
2009-Mar-19 00:23:35 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-19 00:23:35 START   begin_task: Starting task 'waiting on setcal'
2009-Mar-19 00:23:35 LOG5    begin_task: Level: (4)    ID = <10311>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:35 LOG4    got_cormsg: From DATATAKING: setcal hcorcal
2009-Mar-19 00:23:35 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-19 00:23:37 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:23:37 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-19 00:23:37 STOP    end_task: Finishing task 'waiting on setcal' with status 'OK'
2009-Mar-19 00:23:37 LOG5    end_task: Level: (4)    ID = <10311>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:37 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'setcal'
2009-Mar-19 00:23:37 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-19 00:23:37 LOG3    socket_wait: To ALFAMON: CAL HI
2009-Mar-19 00:23:37 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-19 00:23:37 LOG5    begin_task: Level: (4)    ID = <10312>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:37 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:23:38 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-19 00:23:38 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-19 00:23:38 LOG5    end_task: Level: (4)    ID = <10312>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:38 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-19 00:23:38 LOG3    to_alfamon: To ALFAMON: CAL HI
2009-Mar-19 00:23:38 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-19 00:23:38 LOG3    socket_wait: To ALFAMON: NOISE ACTIVE
2009-Mar-19 00:23:38 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-19 00:23:38 LOG5    begin_task: Level: (4)    ID = <10313>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:38 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-19 00:23:38 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-19 00:23:38 LOG5    end_task: Level: (4)    ID = <10313>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:38 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-19 00:23:38 LOG3    to_alfamon: To ALFAMON: NOISE ACTIVE
2009-Mar-19 00:23:38 STOP    end_task: Finishing task 'selecting calibration type' with status 'OK'
2009-Mar-19 00:23:38 LOG5    end_task: Level: (3)    ID = <10310>    Status = 0 0 0 0  ok
2009-Mar-19 00:23:38 LOG4    send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time}
2009-Mar-19 00:23:38 INFO2   astwait: Waiting for 28 seconds from 04:23:38 to 04:24:06 UTC ...
2009-Mar-19 00:23:38 LOG4    send_obs_status: To obs_status: <1> TASKTIME 28 BITMAP stat_wait MESSAGE {Waiting ...}
2009-Mar-19 00:23:38 START   begin_task: Starting task 'waiting on waiting for AST time'
2009-Mar-19 00:23:38 LOG5    begin_task: Level: (3)    ID = <10314>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:06 STOP    end_task: Finishing task 'waiting on waiting for AST time' with status 'OK'
2009-Mar-19 00:24:06 LOG5    end_task: Level: (3)    ID = <10314>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:06 INFO3   astwait: Finished waiting
2009-Mar-19 00:24:06 LOG4    send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy
2009-Mar-19 00:24:06 LOG5    dopset_later: Calling 'dopset_later 61.401499459258069'
2009-Mar-19 00:24:06 INFO3   dopset_later: Setting Doppler correction for 00:25:06 (61.4 seconds from now)
2009-Mar-19 00:24:06 LOG5    antvel: Calling 'antvel 313.470000 15.100656 F 61.401499459258069'
2009-Mar-19 00:24:06 LOG2    antvel: Transforming current Az = 313.47  ZA = 15.10 to apparent RA = 12:29:30.1  Dec = +07:41:42.1
2009-Mar-19 00:24:06 LOG2    antvel: Parameters to Doppler: Heliocentric 15906 2009 78 0.0
2009-Mar-19 00:24:06 INFO5   antvel: Computed antenna velocity: -3.13081 km/s
2009-Mar-19 00:24:06 LOG3    dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-3.1308132965 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786
2009-Mar-19 00:24:06 INFO4   dopset_gen: New sky frequencies: 1381.257853 1381.257853 1381.257853 1381.257853 1381.257853 1381.257853 1381.257853 1381.257853 1381.257853
2009-Mar-19 00:24:06 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1381.257853 sky0=1381.257853 sky1=1381.257853 sky2=1381.257853 sky3=1381.257853 sky4=1381.257853 sky5=1381.257853 sky6=1381.257853 sky7=1381.257853 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-19 00:24:06 LOG2    dopset_gen: Result from 'sky2syn': 1631.257853 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-19 00:24:06 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1631257853.0}
2009-Mar-19 00:24:06 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-19 00:24:06 LOG4    send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation}
2009-Mar-19 00:24:06 INFO3   fixed_driftmap: Switching to tracking mode for calibration
2009-Mar-19 00:24:06 INFO5   fixed_driftmap: Tracking J2000 position:  RA = 12:28:03.6  Dec = +07:44:45.3
2009-Mar-19 00:24:06 LOG3    track_source: Calling 'track_source AGESVC1B_p2_051 122803.6 074445.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)'
2009-Mar-19 00:24:06 START   begin_task: Starting task 'sending tracking commands'
2009-Mar-19 00:24:06 LOG5    begin_task: Level: (3)    ID = <10315>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:06 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_051}    INFO {Slewing to source 'AGESVC1B_p2_051' ...}
2009-Mar-19 00:24:06 INFO1   track_source: Starting to track AGESVC1B_p2_051
2009-Mar-19 00:24:06 LOG3    vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_051"
2009-Mar-19 00:24:06 LOG3    vw_send: To DATATAKING: set ra 122803.6
2009-Mar-19 00:24:06 LOG3    vw_send: To DATATAKING: set dec 074445.3
2009-Mar-19 00:24:06 LOG3    vw_send: To DATATAKING: pnt tr send
2009-Mar-19 00:24:06 LOG3    vw_send: To DATATAKING: pnt tr 122803.6 074445.3 -CJ
2009-Mar-19 00:24:06 LOG3    vw_send: To DATATAKING: dopsetvel 8500.0 hel
2009-Mar-19 00:24:06 STOP    finish_task: Finishing task 'sending tracking commands'
2009-Mar-19 00:24:06 LOG5    finish_task: Level: (3)    ID = <10315>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:06 INFO2   finish_task: DONE finished sending: tracking commands
2009-Mar-19 00:24:06 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:24:06 STOP    end_task: Finishing task 'sending tracking commands' with status 'OK'
2009-Mar-19 00:24:06 LOG5    end_task: Level: (3)    ID = <10315>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:06 START   begin_task: Starting task 'waiting on telescope'
2009-Mar-19 00:24:06 LOG5    begin_task: Level: (3)    ID = <10316>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:06 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew    INFO {Waiting for telescope to track source ...}
2009-Mar-19 00:24:06 LOG3    waittrk: Start waittrk 5
2009-Mar-19 00:24:06 START   begin_task: Starting task 'waiting on telescope movement'
2009-Mar-19 00:24:06 LOG5    begin_task: Level: (4)    ID = <10317>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:06 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1631257853.0}
2009-Mar-19 00:24:06 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-19 00:24:06 LOG4    got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_051"
2009-Mar-19 00:24:06 LOG4    got_cormsg: From DATATAKING: set ra 122803.6
2009-Mar-19 00:24:06 LOG4    got_cormsg: From DATATAKING: set dec 074445.3
2009-Mar-19 00:24:06 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:24:06 LOG4    got_cormsg: From DATATAKING: vw% vw% 122803.6
2009-Mar-19 00:24:06 LOG4    got_cormsg: From DATATAKING: vw% 074445.3
2009-Mar-19 00:24:06 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:24:06 LOG4    got_cormsg: From DATATAKING: pnt tr send
2009-Mar-19 00:24:06 LOG4    got_cormsg: From DATATAKING: pnt tr 122803.6 074445.3 -CJ
2009-Mar-19 00:24:06 LOG4    got_cormsg: From DATATAKING: dopsetvel 8500.0 hel
2009-Mar-19 00:24:06 LOG4    got_cormsg: From DATATAKING: vw% vw%
2009-Mar-19 00:24:06 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:24:11 STOP    end_task: Finishing task 'waiting on telescope movement' with status 'OK'
2009-Mar-19 00:24:11 LOG5    end_task: Level: (4)    ID = <10317>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:11 START   begin_task: Starting task 'waiting on telescope on source'
2009-Mar-19 00:24:11 LOG5    begin_task: Level: (4)    ID = <10318>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:13 STOP    end_task: Finishing task 'waiting on telescope on source' with status 'OK'
2009-Mar-19 00:24:13 LOG5    end_task: Level: (4)    ID = <10318>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:13 LOG4    send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy
2009-Mar-19 00:24:13 INFO2   waittrk: Now tracking AGESVC1B_p2_051
2009-Mar-19 00:24:13 LOG4    waittrk: Current telescope position:  Az = 313.15  ZA = 15.09
2009-Mar-19 00:24:13 STOP    finish_task: Finishing task 'waiting on telescope'
2009-Mar-19 00:24:13 LOG5    finish_task: Level: (3)    ID = <10316>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:13 INFO2   finish_task: DONE finished waiting: telescope on source
2009-Mar-19 00:24:13 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:24:13 STOP    end_task: Finishing task 'waiting on telescope' with status 'OK'
2009-Mar-19 00:24:13 LOG5    end_task: Level: (3)    ID = <10316>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:13 START   begin_task: Starting task 'adjusting WAPP power'
2009-Mar-19 00:24:13 LOG5    begin_task: Level: (3)    ID = <10319>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:13 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT    BITMAP stat_power INFO {Adjusting WAPP power ...}
2009-Mar-19 00:24:13 INFO2   adjust_power: Starting to adjust WAPP power
2009-Mar-19 00:24:13 LOG3    vw_send: To DATATAKING: adjpwrif2 
2009-Mar-19 00:24:13 LOG2    socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE'
2009-Mar-19 00:24:13 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-19 00:24:13 START   begin_task: Starting task 'waiting on adjpwrif2'
2009-Mar-19 00:24:13 LOG5    begin_task: Level: (4)    ID = <10320>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:14 LOG4    got_cormsg: From DATATAKING: adjpwrif2
2009-Mar-19 00:24:14 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-19 00:24:16 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:24:16 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-19 00:24:16 STOP    end_task: Finishing task 'waiting on adjpwrif2' with status 'OK'
2009-Mar-19 00:24:16 LOG5    end_task: Level: (4)    ID = <10320>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:16 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2'
2009-Mar-19 00:24:16 START   begin_task: Starting task 'adjusting WAPP power'
2009-Mar-19 00:24:16 LOG5    begin_task: Level: (4)    ID = <10321>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:16 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT    BITMAP stat_power INFO {Adjusting power ...}
2009-Mar-19 00:24:16 LOG3    sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-19 00:24:16 LOG3    sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-19 00:24:17 LOG3    sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-19 00:24:17 LOG3    sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-19 00:24:17 START   begin_task: Starting task 'waiting on adjust WAPP power'
2009-Mar-19 00:24:17 LOG5    begin_task: Level: (5)    ID = <10322>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:17 LOG4    WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1'
2009-Mar-19 00:24:17 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:24:17 INFO2   WAPP=1-auto_atten_dual: Attenuators beam 0:  7  6 dB  ---  beam 1:  7  7 dB
2009-Mar-19 00:24:17 INFO2   WAPP=2-auto_atten_dual: Attenuators beam 2:  7  4 dB  ---  beam 3:  4  3 dB
2009-Mar-19 00:24:17 INFO2   WAPP=3-auto_atten_dual: Attenuators beam 4:  3  1 dB  ---  beam 5:  6  4 dB
2009-Mar-19 00:24:17 INFO2   WAPP=4-auto_atten_dual: Attenuators beam 6:  3  0 dB  ---  beam 7:  2  0 dB
2009-Mar-19 00:24:17 INFO1   WAPP=1+2+3+4-adjust_power: DONE adjusting power
2009-Mar-19 00:24:17 STOP    end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK'
2009-Mar-19 00:24:17 LOG5    end_task: Level: (5)    ID = <10322>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:17 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 0:  1.063  1.007    ALFA beam 1:  0.977  0.948
2009-Mar-19 00:24:17 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 2:  0.928  1.097    ALFA beam 3:  0.981  0.957
2009-Mar-19 00:24:17 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 4:  0.994  1.080    ALFA beam 5:  0.909  1.025
2009-Mar-19 00:24:17 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 6:  1.006  0.111    ALFA beam 7:  1.109  0.121
2009-Mar-19 00:24:17 STOP    finish_task: Finishing task 'adjusting WAPP power'
2009-Mar-19 00:24:17 LOG5    finish_task: Level: (4)    ID = <10321>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:17 INFO3   finish_task: DONE finished adjusting: WAPP power
2009-Mar-19 00:24:17 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:24:17 STOP    end_task: Finishing task 'adjusting WAPP power' with status 'OK'
2009-Mar-19 00:24:17 LOG5    end_task: Level: (4)    ID = <10321>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:17 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_busy
2009-Mar-19 00:24:17 STOP    finish_task: Finishing task 'adjusting WAPP power'
2009-Mar-19 00:24:17 LOG5    finish_task: Level: (3)    ID = <10319>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:17 INFO2   finish_task: DONE finished adjusting: WAPP power levels
2009-Mar-19 00:24:17 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:24:17 STOP    end_task: Finishing task 'adjusting WAPP power' with status 'OK'
2009-Mar-19 00:24:17 LOG5    end_task: Level: (3)    ID = <10319>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:17 LOG3    send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin
2009-Mar-19 00:24:17 LOG3    send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin
2009-Mar-19 00:24:17 LOG3    send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin
2009-Mar-19 00:24:17 LOG3    send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin
2009-Mar-19 00:24:17 LOG2    take_cal: Calling 'take_cal hcorcal 5 0'
2009-Mar-19 00:24:17 START   begin_task: Starting task 'WAPP calibration'
2009-Mar-19 00:24:17 LOG5    begin_task: Level: (3)    ID = <10323>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:17 LOG4    send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration}    INFO {Making WAPP calibration ...}
2009-Mar-19 00:24:17 START   begin_task: Starting task 'selecting calibration type'
2009-Mar-19 00:24:17 LOG5    begin_task: Level: (4)    ID = <10324>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:17 LOG3    vw_send: To DATATAKING: setcal hcorcal
2009-Mar-19 00:24:18 LOG2    socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE'
2009-Mar-19 00:24:18 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-19 00:24:18 START   begin_task: Starting task 'waiting on setcal'
2009-Mar-19 00:24:18 LOG5    begin_task: Level: (5)    ID = <10325>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:18 LOG4    WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin'
2009-Mar-19 00:24:18 LOG4    got_cormsg: From DATATAKING: setcal hcorcal
2009-Mar-19 00:24:18 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-19 00:24:18 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:24:18 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-19 00:24:18 STOP    end_task: Finishing task 'waiting on setcal' with status 'OK'
2009-Mar-19 00:24:18 LOG5    end_task: Level: (5)    ID = <10325>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:18 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'setcal'
2009-Mar-19 00:24:18 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-19 00:24:18 LOG3    socket_wait: To ALFAMON: CAL HI
2009-Mar-19 00:24:18 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-19 00:24:18 LOG5    begin_task: Level: (5)    ID = <10326>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:18 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:24:18 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-19 00:24:18 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-19 00:24:18 LOG5    end_task: Level: (5)    ID = <10326>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:18 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-19 00:24:18 LOG3    to_alfamon: To ALFAMON: CAL HI
2009-Mar-19 00:24:18 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-19 00:24:18 LOG3    socket_wait: To ALFAMON: NOISE ACTIVE
2009-Mar-19 00:24:18 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-19 00:24:18 LOG5    begin_task: Level: (5)    ID = <10327>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:18 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-19 00:24:18 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-19 00:24:18 LOG5    end_task: Level: (5)    ID = <10327>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:18 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-19 00:24:18 LOG3    to_alfamon: To ALFAMON: NOISE ACTIVE
2009-Mar-19 00:24:18 STOP    end_task: Finishing task 'selecting calibration type' with status 'OK'
2009-Mar-19 00:24:18 LOG5    end_task: Level: (4)    ID = <10324>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:18 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...}
2009-Mar-19 00:24:18 LOG3    wapp_calcontrol: To CALCONTROL: CALON
2009-Mar-19 00:24:18 LOG3    sock_errsend: To CALCONTROL: CALON STATUS
2009-Mar-19 00:24:18 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-19 00:24:18 LOG5    begin_task: Level: (4)    ID = <10328>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:18 NOTE    WAPPDATA-new_file: New FITS file: wapp.20090319.a2048.0001.fits
2009-Mar-19 00:24:18 LOG4    send_obs_status: To obs_status: <0> FILENAME {wapp.20090319.a2048.0001.fits}
2009-Mar-19 00:24:18 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-19 00:24:18 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x03
2009-Mar-19 00:24:18 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-19 00:24:18 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-19 00:24:18 LOG5    end_task: Level: (4)    ID = <10328>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:18 LOG4    send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...}
2009-Mar-19 00:24:18 LOG4    take_data: Calling 'take_data 5 5 CAL ON -'
2009-Mar-19 00:24:18 START   begin_task: Starting task 'WAPP spectral observation'
2009-Mar-19 00:24:18 LOG5    begin_task: Level: (4)    ID = <10329>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:18 LOG5    log_alfabeam: Parameters: 12.467666666666668 7.7459166666666679 11.745027 2009.2135985626282 58.699898
2009-Mar-19 00:24:18 LOG4    log_alfabeam: ALFABEAM 0  12.467666666666661   7.745916666666667
2009-Mar-19 00:24:18 LOG4    log_alfabeam: ALFABEAM 1  12.465410813419593   7.843616646521374
2009-Mar-19 00:24:18 LOG4    log_alfabeam: ALFABEAM 2  12.461121319101412   7.778860608751176
2009-Mar-19 00:24:18 LOG4    log_alfabeam: ALFABEAM 3  12.463338515702867   7.680964012504377
2009-Mar-19 00:24:18 LOG4    log_alfabeam: ALFABEAM 4  12.469889853131486   7.647934719879714
2009-Mar-19 00:24:18 LOG4    log_alfabeam: ALFABEAM 5  12.474231362840662   7.713444626432890
2009-Mar-19 00:24:18 LOG4    log_alfabeam: ALFABEAM 6  12.471969503904146   7.811229494308174
2009-Mar-19 00:24:18 INFO2   take_data: Starting WAPP scan: 907800004
2009-Mar-19 00:24:19 LOG4    send_obs_status: To obs_status: <0> TASKTIME 5
2009-Mar-19 00:24:19 START   begin_task: Starting task 'waiting on WAPP spectra'
2009-Mar-19 00:24:19 LOG5    begin_task: Level: (5)    ID = <10330>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:19 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-19 00:24:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:24:19 LOG4    check_wapp_levels: WAPP-1 power levels:    1.063  1.007    0.977  0.948
2009-Mar-19 00:24:19 LOG4    check_wapp_levels: WAPP-2 power levels:    0.928  1.097    0.981  0.957
2009-Mar-19 00:24:19 LOG4    check_wapp_levels: WAPP-3 power levels:    0.994  1.080    0.909  1.025
2009-Mar-19 00:24:19 LOG4    check_wapp_levels: WAPP-4 power levels:    1.006  0.111    1.109  0.121
2009-Mar-19 00:24:19 INFO1   WAPP=1+2+3+4-start_spectra: start sec 15860.00
2009-Mar-19 00:24:25 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.257853 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-19 00:24:25 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.257853 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:24:25 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.257853 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:24:25 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.257853 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:24:25 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.257853 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:24:25 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.257853 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:24:25 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.257853 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:24:25 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.257853 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-19 00:24:25 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.257853 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:24:25 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad)
2009-Mar-19 00:24:25 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-19 00:24:25 STOP    end_task: Finishing task 'waiting on WAPP spectra' with status 'OK'
2009-Mar-19 00:24:25 LOG5    end_task: Level: (5)    ID = <10330>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:25 STOP    end_task: Finishing task 'WAPP spectral observation' with status 'OK'
2009-Mar-19 00:24:25 LOG5    end_task: Level: (4)    ID = <10329>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:25 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...}
2009-Mar-19 00:24:25 LOG3    wapp_calcontrol: To CALCONTROL: CALOFF
2009-Mar-19 00:24:25 LOG3    sock_errsend: To CALCONTROL: CALOFF STATUS
2009-Mar-19 00:24:25 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-19 00:24:25 LOG5    begin_task: Level: (4)    ID = <10331>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:25 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-19 00:24:25 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x02
2009-Mar-19 00:24:25 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-19 00:24:25 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-19 00:24:25 LOG5    end_task: Level: (4)    ID = <10331>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:25 LOG4    send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...}
2009-Mar-19 00:24:25 LOG4    take_data: Calling 'take_data 5 5 CAL OFF -'
2009-Mar-19 00:24:25 START   begin_task: Starting task 'WAPP spectral observation'
2009-Mar-19 00:24:25 LOG5    begin_task: Level: (4)    ID = <10332>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:25 LOG5    log_alfabeam: Parameters: 12.467666666666668 7.7459166666666679 11.746977 2009.2135987844449 58.699898
2009-Mar-19 00:24:25 LOG4    log_alfabeam: ALFABEAM 0  12.467666666666664   7.745916666666671
2009-Mar-19 00:24:25 LOG4    log_alfabeam: ALFABEAM 1  12.465419251207852   7.843659502904256
2009-Mar-19 00:24:25 LOG4    log_alfabeam: ALFABEAM 2  12.461124189477848   7.778986076728277
2009-Mar-19 00:24:25 LOG4    log_alfabeam: ALFABEAM 3  12.463332879371620   7.681047082883905
2009-Mar-19 00:24:25 LOG4    log_alfabeam: ALFABEAM 4  12.469881350403531   7.647892098429508
2009-Mar-19 00:24:25 LOG4    log_alfabeam: ALFABEAM 5  12.474228560331447   7.713319479164462
2009-Mar-19 00:24:25 LOG4    log_alfabeam: ALFABEAM 6  12.471975135096020   7.811147425792279
2009-Mar-19 00:24:25 INFO2   take_data: Starting WAPP scan: 907800005
2009-Mar-19 00:24:26 LOG4    send_obs_status: To obs_status: <0> TASKTIME 5
2009-Mar-19 00:24:26 START   begin_task: Starting task 'waiting on WAPP spectra'
2009-Mar-19 00:24:26 LOG5    begin_task: Level: (5)    ID = <10333>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:26 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-19 00:24:26 INFO1   WAPP=1+2+3+4-start_spectra: start sec 15867.00
2009-Mar-19 00:24:31 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.563 (still bad)
2009-Mar-19 00:24:32 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.257853 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-19 00:24:32 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.257853 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:24:32 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.257853 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:24:32 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.257853 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:24:32 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.257853 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:24:32 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.257853 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:24:32 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.257853 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:24:32 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.257853 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-19 00:24:32 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.257853 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:24:32 INFO1   WAPP=1+2+3+4-start_spectra: Skipping Tsys
2009-Mar-19 00:24:32 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-19 00:24:32 STOP    end_task: Finishing task 'waiting on WAPP spectra' with status 'OK'
2009-Mar-19 00:24:32 LOG5    end_task: Level: (5)    ID = <10333>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:32 STOP    end_task: Finishing task 'WAPP spectral observation' with status 'OK'
2009-Mar-19 00:24:32 LOG5    end_task: Level: (4)    ID = <10332>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:32 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_busy
2009-Mar-19 00:24:32 STOP    finish_task: Finishing task 'WAPP calibration'
2009-Mar-19 00:24:32 LOG5    finish_task: Level: (3)    ID = <10323>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:32 INFO2   finish_task: DONE finished calibration: WAPP calibration
2009-Mar-19 00:24:32 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:24:32 STOP    end_task: Finishing task 'WAPP calibration' with status 'OK'
2009-Mar-19 00:24:32 LOG5    end_task: Level: (3)    ID = <10323>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:32 LOG4    send_obs_status: To obs_status: <1> INFO {Returning to drift position}
2009-Mar-19 00:24:32 INFO4   fixed_driftmap: Sending telescope back to drift position Az = 313.47 and ZA = 15.10
2009-Mar-19 00:24:32 LOG3    track_source: Calling 'track_source AGESVC1B_p2_051 313.47 15.1006557605 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)'
2009-Mar-19 00:24:32 START   begin_task: Starting task 'sending tracking commands'
2009-Mar-19 00:24:32 LOG5    begin_task: Level: (3)    ID = <10334>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:32 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_051}    INFO {Slewing to source 'AGESVC1B_p2_051' ...}
2009-Mar-19 00:24:32 INFO1   track_source: Starting to track AGESVC1B_p2_051
2009-Mar-19 00:24:32 LOG3    vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_051"
2009-Mar-19 00:24:32 LOG3    vw_send: To DATATAKING: set ra 313.47
2009-Mar-19 00:24:32 LOG3    vw_send: To DATATAKING: set dec 15.1006557605
2009-Mar-19 00:24:32 LOG3    vw_send: To DATATAKING: pnt tr send
2009-Mar-19 00:24:32 LOG3    vw_send: To DATATAKING: pnt tr 313.47 15.1006557605 -CF
2009-Mar-19 00:24:32 LOG3    vw_send: To DATATAKING: dopsetvel 8500.0 hel
2009-Mar-19 00:24:32 STOP    finish_task: Finishing task 'sending tracking commands'
2009-Mar-19 00:24:32 LOG5    finish_task: Level: (3)    ID = <10334>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:32 INFO2   finish_task: DONE finished sending: tracking commands
2009-Mar-19 00:24:33 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:24:33 STOP    end_task: Finishing task 'sending tracking commands' with status 'OK'
2009-Mar-19 00:24:33 LOG5    end_task: Level: (3)    ID = <10334>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:33 LOG1    fixed_driftmap: Parameters: HA = -00:43:59.6  Start = 11:45:30.6  LST = 11:44:56.1  diff = 34.5 secs
2009-Mar-19 00:24:33 INFO2   fixed_driftmap: Waiting 32.5 seconds for RA 12:29:30
2009-Mar-19 00:24:33 INFO2   lstwait: Waiting for 32.4 secs from LST 11:44:56 to LST 11:45:29 ...
2009-Mar-19 00:24:33 LOG4    send_obs_status: To obs_status: <1> TASKTIME 32.408877648053078 BITMAP stat_wait MESSAGE {Waiting ...}
2009-Mar-19 00:24:33 START   begin_task: Starting task 'waiting on wait on LST'
2009-Mar-19 00:24:33 LOG5    begin_task: Level: (3)    ID = <10335>    Status = 0 0 0 0  ok
2009-Mar-19 00:24:33 LOG4    got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_051"
2009-Mar-19 00:24:33 LOG4    got_cormsg: From DATATAKING: set ra 313.47
2009-Mar-19 00:24:33 LOG4    got_cormsg: From DATATAKING: set dec 15.1006557605
2009-Mar-19 00:24:33 LOG4    got_cormsg: From DATATAKING: vw% 313.47
2009-Mar-19 00:24:33 LOG4    got_cormsg: From DATATAKING: vw% 15.1006557605
2009-Mar-19 00:24:33 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:24:33 LOG4    got_cormsg: From DATATAKING: pnt tr send
2009-Mar-19 00:24:33 LOG4    got_cormsg: From DATATAKING: pnt tr 313.47 15.1006557605 -CF
2009-Mar-19 00:24:33 LOG4    got_cormsg: From DATATAKING: dopsetvel 8500.0 hel
2009-Mar-19 00:24:33 LOG4    got_cormsg: From DATATAKING: vw% vw%
2009-Mar-19 00:24:33 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:24:37 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:25:05 STOP    end_task: Finishing task 'waiting on wait on LST' with status 'OK'
2009-Mar-19 00:25:05 LOG5    end_task: Level: (3)    ID = <10335>    Status = 0 0 0 0  ok
2009-Mar-19 00:25:05 LOG4    lstwait: Finished waiting 0.59 seconds late
2009-Mar-19 00:25:05 INFO3   lstwait: Finished waiting
2009-Mar-19 00:25:05 LOG4    send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy
2009-Mar-19 00:25:05 INFO2   fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1
2009-Mar-19 00:25:05 LOG4    send_obs_status: To obs_status: <1> LOOP 1
2009-Mar-19 00:25:05 LOG4    send_obs_status: To obs_status: <1> INFO {Making drift scan}
2009-Mar-19 00:25:05 LOG4    send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...}
2009-Mar-19 00:25:05 LOG4    take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -'
2009-Mar-19 00:25:05 START   begin_task: Starting task 'WAPP spectral observation'
2009-Mar-19 00:25:05 LOG5    begin_task: Level: (3)    ID = <10336>    Status = 0 0 0 0  ok
2009-Mar-19 00:25:05 LOG5    log_alfabeam: Can't log alfabeam, not J2000
2009-Mar-19 00:25:05 INFO2   take_data: Starting WAPP scan: 907800006
2009-Mar-19 00:25:06 LOG4    send_obs_status: To obs_status: <0> TASKTIME 1200
2009-Mar-19 00:25:06 START   begin_task: Starting task 'waiting on WAPP spectra'
2009-Mar-19 00:25:06 LOG5    begin_task: Level: (4)    ID = <10337>    Status = 0 0 0 0  ok
2009-Mar-19 00:25:06 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-19 00:25:06 INFO1   WAPP=1+2+3+4-start_spectra: start sec 15907.00
2009-Mar-19 00:25:08 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.257853 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-19 00:25:08 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.257853 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:25:08 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.257853 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:25:08 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.257853 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:25:08 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.257853 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:25:08 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.257853 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:25:08 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.257853 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:25:08 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.257853 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-19 00:25:08 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.257853 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:25:08 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:25:10 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:25:12 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:25:14 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:25:16 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:25:18 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:25:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:25:20 LOG4    check_wapp_levels: WAPP-1 power levels:    1.061  1.006    0.977  0.950
2009-Mar-19 00:25:20 LOG4    check_wapp_levels: WAPP-2 power levels:    0.928  1.094    0.980  0.956
2009-Mar-19 00:25:20 LOG4    check_wapp_levels: WAPP-3 power levels:    0.995  1.085    0.911  1.028
2009-Mar-19 00:25:20 LOG4    check_wapp_levels: WAPP-4 power levels:    1.017  0.111    1.121  0.122
2009-Mar-19 00:25:22 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad)
2009-Mar-19 00:25:24 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad)
2009-Mar-19 00:25:26 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:25:28 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad)
2009-Mar-19 00:25:30 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.127 (still bad)
2009-Mar-19 00:25:32 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.132 (still bad)
2009-Mar-19 00:25:34 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.140 (still bad)
2009-Mar-19 00:25:36 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.141 (still bad)
2009-Mar-19 00:25:38 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.140 (still bad)
2009-Mar-19 00:25:40 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.141 (still bad)
2009-Mar-19 00:25:42 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.134 (still bad)
2009-Mar-19 00:25:44 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.129 (still bad)
2009-Mar-19 00:25:46 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.129 (still bad)
2009-Mar-19 00:25:48 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad)
2009-Mar-19 00:25:50 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:25:52 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:25:54 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:25:56 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:25:58 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:26:00 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:26:02 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:26:04 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:26:06 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:26:08 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:26:10 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:26:12 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:26:15 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:26:17 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:26:19 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:26:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:26:21 LOG4    check_wapp_levels: WAPP-1 power levels:    1.065  1.004    0.991  0.959
2009-Mar-19 00:26:21 LOG4    check_wapp_levels: WAPP-2 power levels:    0.928  1.095    0.980  0.956
2009-Mar-19 00:26:21 LOG4    check_wapp_levels: WAPP-3 power levels:    0.992  1.083    0.912  1.027
2009-Mar-19 00:26:21 LOG4    check_wapp_levels: WAPP-4 power levels:    1.007  0.111    1.111  0.121
2009-Mar-19 00:26:23 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:26:25 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:26:27 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:26:29 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:26:31 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:26:33 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:26:35 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:26:37 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:26:39 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:26:41 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:26:43 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:26:45 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:26:47 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:26:49 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:26:51 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:26:53 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:26:55 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad)
2009-Mar-19 00:26:57 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:26:59 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:27:01 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:27:03 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:27:05 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:27:07 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:27:09 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:27:11 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:27:13 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:27:15 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:27:17 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:27:19 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:27:21 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:27:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:27:23 LOG4    check_wapp_levels: WAPP-1 power levels:    1.074  1.015    0.985  0.956
2009-Mar-19 00:27:23 LOG4    check_wapp_levels: WAPP-2 power levels:    0.931  1.096    0.988  0.965
2009-Mar-19 00:27:23 LOG4    check_wapp_levels: WAPP-3 power levels:    0.997  1.085    0.919  1.033
2009-Mar-19 00:27:23 LOG4    check_wapp_levels: WAPP-4 power levels:    1.015  0.111    1.119  0.122
2009-Mar-19 00:27:25 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:27:27 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:27:29 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:27:31 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:27:33 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:27:35 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:27:37 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:27:39 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:27:42 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:27:44 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad)
2009-Mar-19 00:27:46 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:27:48 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:27:50 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:27:52 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:27:54 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:27:56 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:27:58 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:28:00 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad)
2009-Mar-19 00:28:02 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:28:04 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:28:06 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:28:08 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:28:10 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:28:12 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:28:14 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:28:16 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:28:18 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:28:20 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:28:22 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:28:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:28:24 LOG4    check_wapp_levels: WAPP-1 power levels:    1.070  1.012    0.985  0.956
2009-Mar-19 00:28:24 LOG4    check_wapp_levels: WAPP-2 power levels:    0.926  1.091    0.981  0.960
2009-Mar-19 00:28:24 LOG4    check_wapp_levels: WAPP-3 power levels:    0.997  1.084    0.915  1.031
2009-Mar-19 00:28:24 LOG4    check_wapp_levels: WAPP-4 power levels:    1.010  0.111    1.118  0.122
2009-Mar-19 00:28:26 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:28:28 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:28:30 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:28:32 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:28:34 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:28:36 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:28:38 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:28:40 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:28:42 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:28:44 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:28:46 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:28:48 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad)
2009-Mar-19 00:28:50 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:28:52 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:28:54 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:28:56 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:28:58 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:29:00 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad)
2009-Mar-19 00:29:02 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:29:04 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad)
2009-Mar-19 00:29:07 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:29:09 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:29:11 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:29:13 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:29:15 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:29:17 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:29:19 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:29:21 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:29:23 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad)
2009-Mar-19 00:29:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:29:25 LOG4    check_wapp_levels: WAPP-1 power levels:    1.065  1.008    0.980  0.949
2009-Mar-19 00:29:25 LOG4    check_wapp_levels: WAPP-2 power levels:    0.927  1.090    0.983  0.960
2009-Mar-19 00:29:25 LOG4    check_wapp_levels: WAPP-3 power levels:    0.991  1.085    0.917  1.031
2009-Mar-19 00:29:25 LOG4    check_wapp_levels: WAPP-4 power levels:    1.013  0.111    1.118  0.122
2009-Mar-19 00:29:27 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:29:29 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:29:31 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:29:33 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:29:35 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:29:37 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad)
2009-Mar-19 00:29:39 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad)
2009-Mar-19 00:29:41 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad)
2009-Mar-19 00:29:43 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:29:45 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:29:47 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad)
2009-Mar-19 00:29:49 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:29:51 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:29:53 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad)
2009-Mar-19 00:29:55 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:29:57 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:29:59 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad)
2009-Mar-19 00:30:01 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:30:03 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:30:05 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:30:07 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:30:09 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:30:11 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:30:13 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:30:15 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:30:17 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:30:19 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:30:21 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:30:23 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:30:25 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:30:27 LOG3    WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964  diff = 2)!
2009-Mar-19 00:30:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:30:28 LOG4    check_wapp_levels: WAPP-1 power levels:    1.062  1.005    0.978  0.948
2009-Mar-19 00:30:28 LOG4    check_wapp_levels: WAPP-2 power levels:    0.926  1.092    0.984  0.959
2009-Mar-19 00:30:28 LOG4    check_wapp_levels: WAPP-3 power levels:    0.993  1.084    0.917  1.029
2009-Mar-19 00:30:28 LOG4    check_wapp_levels: WAPP-4 power levels:    1.010  0.111    1.115  0.122
2009-Mar-19 00:30:30 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:30:32 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:30:34 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:30:36 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:30:38 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:30:40 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:30:42 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:30:44 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:30:46 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:30:48 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:30:50 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:30:52 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:30:54 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:30:56 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:30:58 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:31:00 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:31:02 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:31:04 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:31:06 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:31:08 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:31:10 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:31:12 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:31:14 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:31:16 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:31:18 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:31:20 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:31:22 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:31:24 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:31:26 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:31:28 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:31:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:31:30 LOG4    check_wapp_levels: WAPP-1 power levels:    1.063  1.007    0.979  0.947
2009-Mar-19 00:31:30 LOG4    check_wapp_levels: WAPP-2 power levels:    0.926  1.089    0.988  0.963
2009-Mar-19 00:31:30 LOG4    check_wapp_levels: WAPP-3 power levels:    0.997  1.089    0.913  1.028
2009-Mar-19 00:31:30 LOG4    check_wapp_levels: WAPP-4 power levels:    1.013  0.111    1.117  0.122
2009-Mar-19 00:31:32 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:31:34 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:31:36 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:31:38 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:31:40 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:31:42 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:31:44 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:31:46 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad)
2009-Mar-19 00:31:48 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:31:50 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:31:52 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:31:54 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:31:57 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:31:59 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad)
2009-Mar-19 00:32:01 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:32:03 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:32:05 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-19 00:32:07 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:32:09 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:32:11 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad)
2009-Mar-19 00:32:13 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:32:15 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:32:17 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:32:19 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:32:21 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:32:23 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad)
2009-Mar-19 00:32:25 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:32:27 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:32:29 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:32:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:32:31 LOG4    check_wapp_levels: WAPP-1 power levels:    1.064  1.004    0.977  0.946
2009-Mar-19 00:32:31 LOG4    check_wapp_levels: WAPP-2 power levels:    0.926  1.091    0.981  0.954
2009-Mar-19 00:32:31 LOG4    check_wapp_levels: WAPP-3 power levels:    0.997  1.088    0.912  1.027
2009-Mar-19 00:32:31 LOG4    check_wapp_levels: WAPP-4 power levels:    1.010  0.111    1.115  0.121
2009-Mar-19 00:32:33 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:32:35 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad)
2009-Mar-19 00:32:37 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:32:39 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:32:41 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:32:43 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:32:45 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:32:47 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad)
2009-Mar-19 00:32:49 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:32:51 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:32:53 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:32:55 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:32:57 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:32:59 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad)
2009-Mar-19 00:33:01 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:33:03 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:33:05 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:33:07 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:33:09 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:33:11 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.125 (still bad)
2009-Mar-19 00:33:13 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:33:15 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad)
2009-Mar-19 00:33:17 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.129 (still bad)
2009-Mar-19 00:33:19 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.125 (still bad)
2009-Mar-19 00:33:21 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.125 (still bad)
2009-Mar-19 00:33:23 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad)
2009-Mar-19 00:33:25 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad)
2009-Mar-19 00:33:28 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.129 (still bad)
2009-Mar-19 00:33:30 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.143 (still bad)
2009-Mar-19 00:33:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:33:32 LOG4    check_wapp_levels: WAPP-1 power levels:    1.062  1.008    0.977  0.947
2009-Mar-19 00:33:32 LOG4    check_wapp_levels: WAPP-2 power levels:    0.925  1.091    0.981  0.954
2009-Mar-19 00:33:32 LOG4    check_wapp_levels: WAPP-3 power levels:    0.997  1.089    0.915  1.026
2009-Mar-19 00:33:32 LOG4    check_wapp_levels: WAPP-4 power levels:    1.053  0.111    1.162  0.121
2009-Mar-19 00:33:34 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.190 (still bad)
2009-Mar-19 00:33:36 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.216 (still bad)
2009-Mar-19 00:33:38 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.237 (still bad)
2009-Mar-19 00:33:38 LOG3    WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964  diff = 2)!
2009-Mar-19 00:33:40 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.246 (still bad)
2009-Mar-19 00:33:42 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.234 (still bad)
2009-Mar-19 00:33:44 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.219 (still bad)
2009-Mar-19 00:33:46 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.202 (still bad)
2009-Mar-19 00:33:48 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.173 (still bad)
2009-Mar-19 00:33:50 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.150 (still bad)
2009-Mar-19 00:33:52 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.139 (still bad)
2009-Mar-19 00:33:54 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.127 (still bad)
2009-Mar-19 00:33:56 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad)
2009-Mar-19 00:33:58 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.127 (still bad)
2009-Mar-19 00:34:00 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:34:02 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:34:04 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad)
2009-Mar-19 00:34:06 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:34:08 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:34:10 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad)
2009-Mar-19 00:34:12 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:34:14 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:34:16 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:34:18 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:34:20 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad)
2009-Mar-19 00:34:22 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad)
2009-Mar-19 00:34:24 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:34:26 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:34:28 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-19 00:34:30 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:34:32 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:34:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:34:34 LOG4    check_wapp_levels: WAPP-1 power levels:    1.069  1.009    0.986  0.954
2009-Mar-19 00:34:34 LOG4    check_wapp_levels: WAPP-2 power levels:    0.933  1.102    0.983  0.956
2009-Mar-19 00:34:34 LOG4    check_wapp_levels: WAPP-3 power levels:    0.999  1.087    0.916  1.028
2009-Mar-19 00:34:34 LOG4    check_wapp_levels: WAPP-4 power levels:    1.018  0.111    1.123  0.121
2009-Mar-19 00:34:36 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:34:38 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad)
2009-Mar-19 00:34:40 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad)
2009-Mar-19 00:34:42 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:34:44 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad)
2009-Mar-19 00:34:46 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad)
2009-Mar-19 00:34:48 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:34:50 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:34:52 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:34:55 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:34:57 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:34:59 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad)
2009-Mar-19 00:35:01 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:35:03 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:35:05 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:35:07 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:35:09 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:35:11 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad)
2009-Mar-19 00:35:13 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:35:15 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:35:17 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:35:19 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:35:21 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:35:23 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad)
2009-Mar-19 00:35:25 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:35:27 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:35:29 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:35:31 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:35:33 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:35:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:35:35 LOG4    check_wapp_levels: WAPP-1 power levels:    1.072  1.011    0.983  0.951
2009-Mar-19 00:35:35 LOG4    check_wapp_levels: WAPP-2 power levels:    0.925  1.090    0.984  0.954
2009-Mar-19 00:35:35 LOG4    check_wapp_levels: WAPP-3 power levels:    1.003  1.090    0.919  1.029
2009-Mar-19 00:35:35 LOG4    check_wapp_levels: WAPP-4 power levels:    1.018  0.111    1.122  0.121
2009-Mar-19 00:35:37 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:35:39 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:35:41 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:35:43 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-19 00:35:45 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:35:47 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad)
2009-Mar-19 00:35:49 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:35:51 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:35:53 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:35:55 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:35:57 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:35:59 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad)
2009-Mar-19 00:36:01 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-19 00:36:03 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad)
2009-Mar-19 00:36:05 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad)
2009-Mar-19 00:36:07 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:36:09 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:36:11 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.126 (still bad)
2009-Mar-19 00:36:13 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:36:15 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:36:17 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:36:20 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad)
2009-Mar-19 00:36:22 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad)
2009-Mar-19 00:36:24 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.131 (still bad)
2009-Mar-19 00:36:26 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.126 (still bad)
2009-Mar-19 00:36:28 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad)
2009-Mar-19 00:36:30 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.126 (still bad)
2009-Mar-19 00:36:32 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad)
2009-Mar-19 00:36:34 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad)
2009-Mar-19 00:36:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:36:36 LOG4    check_wapp_levels: WAPP-1 power levels:    1.070  1.008    0.985  0.949
2009-Mar-19 00:36:36 LOG4    check_wapp_levels: WAPP-2 power levels:    0.923  1.091    0.984  0.953
2009-Mar-19 00:36:36 LOG4    check_wapp_levels: WAPP-3 power levels:    1.000  1.088    0.913  1.022
2009-Mar-19 00:36:36 LOG4    check_wapp_levels: WAPP-4 power levels:    1.019  0.111    1.124  0.121
2009-Mar-19 00:36:38 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:36:40 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:36:42 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:36:44 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:36:46 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:36:48 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-19 00:36:50 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:36:52 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:36:54 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:36:56 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-19 00:36:58 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:37:00 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:37:02 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:37:04 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-19 00:37:06 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:37:08 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:37:10 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-19 00:37:12 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:37:14 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-19 00:37:16 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-19 00:37:18 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-19 00:37:20 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-19 00:37:22 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-19 00:37:24 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad)
2009-Mar-19 00:37:26 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-19 00:37:28 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-19 00:37:30 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:37:32 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-19 00:37:34 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-19 00:37:36 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-19 00:37:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)!
2009-Mar-19 00:37:39 LOG4    check_wapp_levels: WAPP-1 power levels:    1.058  1.000    0.976  0.940
2009-Mar-19 00:37:39 LOG4    check_wapp_levels: WAPP-2 power levels:    0.924  1.089    0.981  0.951
2009-Mar-19 00:37:39 LOG4    check_wapp_levels: WAPP-3 power levels:    1.001  1.091    0.913  1.021
2009-Mar-19 00:37:39 LOG4    check_wapp_levels: WAPP-4 power levels:    1.010  0.110    1.115  0.121
2009-Mar-19 00:37:41 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad)
2009-Mar-19 00:37:43 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:37:45 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-19 00:37:47 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad)
2009-Mar-19 00:37:49 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:37:51 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:37:53 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:37:55 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:37:57 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:37:59 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:38:01 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:38:03 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:38:05 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:38:07 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:38:09 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:38:11 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:38:13 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:38:15 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:38:17 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-19 00:38:19 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-19 00:38:21 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad)
2009-Mar-19 00:38:23 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:38:25 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.116 (still bad)
2009-Mar-19 00:38:27 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:38:29 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:38:31 INFO5   check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad)
2009-Mar-19 00:38:33 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:38:35 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad)
2009-Mar-19 00:38:37 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:38:39 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:38:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:38:41 LOG4    check_wapp_levels: WAPP-1 power levels:    1.062  0.999    0.977  0.944
2009-Mar-19 00:38:41 LOG4    check_wapp_levels: WAPP-2 power levels:    0.924  1.090    0.984  0.956
2009-Mar-19 00:38:41 LOG4    check_wapp_levels: WAPP-3 power levels:    1.004  1.090    0.917  1.026
2009-Mar-19 00:38:41 LOG4    check_wapp_levels: WAPP-4 power levels:    1.013  0.111    1.117  0.121
2009-Mar-19 00:38:43 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:38:45 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:38:47 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:38:49 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:38:51 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:38:53 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:38:55 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:38:57 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:38:59 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad)
2009-Mar-19 00:39:01 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:39:03 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad)
2009-Mar-19 00:39:06 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:39:08 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:39:10 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:39:12 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:39:14 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:39:16 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:39:18 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:39:20 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:39:22 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:39:23 LOG3    WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964  diff = 2)!
2009-Mar-19 00:39:24 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:39:26 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:39:28 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:39:30 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:39:32 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:39:34 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:39:36 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad)
2009-Mar-19 00:39:38 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:39:40 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:39:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:39:42 LOG4    check_wapp_levels: WAPP-1 power levels:    1.060  1.004    0.979  0.946
2009-Mar-19 00:39:42 LOG4    check_wapp_levels: WAPP-2 power levels:    0.926  1.091    0.984  0.955
2009-Mar-19 00:39:42 LOG4    check_wapp_levels: WAPP-3 power levels:    1.002  1.087    0.918  1.029
2009-Mar-19 00:39:42 LOG4    check_wapp_levels: WAPP-4 power levels:    1.014  0.111    1.116  0.121
2009-Mar-19 00:39:44 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:39:46 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:39:48 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad)
2009-Mar-19 00:39:50 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:39:52 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:39:54 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:39:56 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:39:58 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:40:00 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:40:02 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:40:04 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:40:06 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:40:08 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:40:10 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:40:12 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:40:14 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:40:16 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:40:18 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:40:20 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:40:22 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:40:24 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:40:26 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:40:28 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:40:30 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:40:32 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:40:34 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:40:37 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:40:39 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:40:41 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:40:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:40:43 LOG4    check_wapp_levels: WAPP-1 power levels:    1.062  1.004    0.978  0.945
2009-Mar-19 00:40:43 LOG4    check_wapp_levels: WAPP-2 power levels:    0.929  1.094    0.982  0.956
2009-Mar-19 00:40:43 LOG4    check_wapp_levels: WAPP-3 power levels:    0.997  1.083    0.915  1.024
2009-Mar-19 00:40:43 LOG4    check_wapp_levels: WAPP-4 power levels:    1.012  0.111    1.114  0.121
2009-Mar-19 00:40:45 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:40:47 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:40:49 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:40:51 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:40:53 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:40:55 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:40:57 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:40:59 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad)
2009-Mar-19 00:41:01 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.126 (still bad)
2009-Mar-19 00:41:03 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.133 (still bad)
2009-Mar-19 00:41:05 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.141 (still bad)
2009-Mar-19 00:41:07 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.150 (still bad)
2009-Mar-19 00:41:09 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.153 (still bad)
2009-Mar-19 00:41:11 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.156 (still bad)
2009-Mar-19 00:41:13 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.153 (still bad)
2009-Mar-19 00:41:15 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.147 (still bad)
2009-Mar-19 00:41:17 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.139 (still bad)
2009-Mar-19 00:41:19 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.133 (still bad)
2009-Mar-19 00:41:21 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.125 (still bad)
2009-Mar-19 00:41:23 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad)
2009-Mar-19 00:41:25 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:41:27 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:41:29 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:41:31 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad)
2009-Mar-19 00:41:33 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:41:35 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad)
2009-Mar-19 00:41:37 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.125 (still bad)
2009-Mar-19 00:41:39 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad)
2009-Mar-19 00:41:41 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad)
2009-Mar-19 00:41:43 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad)
2009-Mar-19 00:41:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:41:45 LOG4    check_wapp_levels: WAPP-1 power levels:    1.068  1.005    0.978  0.946
2009-Mar-19 00:41:45 LOG4    check_wapp_levels: WAPP-2 power levels:    0.938  1.108    0.984  0.955
2009-Mar-19 00:41:45 LOG4    check_wapp_levels: WAPP-3 power levels:    0.995  1.083    0.914  1.024
2009-Mar-19 00:41:45 LOG4    check_wapp_levels: WAPP-4 power levels:    1.017  0.111    1.121  0.122
2009-Mar-19 00:41:47 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.128 (still bad)
2009-Mar-19 00:41:49 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad)
2009-Mar-19 00:41:51 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.126 (still bad)
2009-Mar-19 00:41:53 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.134 (still bad)
2009-Mar-19 00:41:55 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.134 (still bad)
2009-Mar-19 00:41:57 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.139 (still bad)
2009-Mar-19 00:42:00 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.144 (still bad)
2009-Mar-19 00:42:02 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.135 (still bad)
2009-Mar-19 00:42:04 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.130 (still bad)
2009-Mar-19 00:42:06 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.129 (still bad)
2009-Mar-19 00:42:08 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:42:10 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad)
2009-Mar-19 00:42:12 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad)
2009-Mar-19 00:42:14 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:42:16 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:42:18 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:42:20 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:42:22 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:42:24 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad)
2009-Mar-19 00:42:26 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:42:28 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:42:30 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:42:32 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:42:34 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.131 (still bad)
2009-Mar-19 00:42:36 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.146 (still bad)
2009-Mar-19 00:42:38 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.144 (still bad)
2009-Mar-19 00:42:40 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.142 (still bad)
2009-Mar-19 00:42:42 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.137 (still bad)
2009-Mar-19 00:42:44 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad)
2009-Mar-19 00:42:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:42:46 LOG4    check_wapp_levels: WAPP-1 power levels:    1.068  1.010    0.983  0.950
2009-Mar-19 00:42:46 LOG4    check_wapp_levels: WAPP-2 power levels:    0.949  1.115    0.982  0.955
2009-Mar-19 00:42:46 LOG4    check_wapp_levels: WAPP-3 power levels:    0.994  1.082    0.911  1.025
2009-Mar-19 00:42:46 LOG4    check_wapp_levels: WAPP-4 power levels:    1.013  0.111    1.118  0.121
2009-Mar-19 00:42:48 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:42:50 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:42:52 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:42:54 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:42:56 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:42:58 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:43:00 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:43:02 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:43:04 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:43:06 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:43:08 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:43:10 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:43:12 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad)
2009-Mar-19 00:43:14 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:43:16 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad)
2009-Mar-19 00:43:18 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:43:20 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad)
2009-Mar-19 00:43:22 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:43:24 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:43:27 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:43:29 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:43:31 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:43:33 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:43:35 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:43:37 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:43:39 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:43:41 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:43:43 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:43:45 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad)
2009-Mar-19 00:43:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:43:47 LOG4    check_wapp_levels: WAPP-1 power levels:    1.070  1.015    0.981  0.953
2009-Mar-19 00:43:47 LOG4    check_wapp_levels: WAPP-2 power levels:    0.929  1.097    0.985  0.956
2009-Mar-19 00:43:47 LOG4    check_wapp_levels: WAPP-3 power levels:    0.997  1.085    0.921  1.031
2009-Mar-19 00:43:47 LOG4    check_wapp_levels: WAPP-4 power levels:    1.015  0.111    1.121  0.122
2009-Mar-19 00:43:49 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:43:51 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:43:53 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:43:55 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:43:57 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad)
2009-Mar-19 00:43:59 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad)
2009-Mar-19 00:44:01 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad)
2009-Mar-19 00:44:03 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad)
2009-Mar-19 00:44:05 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.127 (still bad)
2009-Mar-19 00:44:07 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.127 (still bad)
2009-Mar-19 00:44:09 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.127 (still bad)
2009-Mar-19 00:44:11 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.128 (still bad)
2009-Mar-19 00:44:13 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.126 (still bad)
2009-Mar-19 00:44:15 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad)
2009-Mar-19 00:44:17 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad)
2009-Mar-19 00:44:19 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad)
2009-Mar-19 00:44:21 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad)
2009-Mar-19 00:44:23 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:44:25 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad)
2009-Mar-19 00:44:27 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad)
2009-Mar-19 00:44:29 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.129 (still bad)
2009-Mar-19 00:44:31 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.133 (still bad)
2009-Mar-19 00:44:33 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.137 (still bad)
2009-Mar-19 00:44:35 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.140 (still bad)
2009-Mar-19 00:44:37 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.138 (still bad)
2009-Mar-19 00:44:39 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.136 (still bad)
2009-Mar-19 00:44:41 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.131 (still bad)
2009-Mar-19 00:44:43 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.127 (still bad)
2009-Mar-19 00:44:45 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad)
2009-Mar-19 00:44:47 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad)
2009-Mar-19 00:44:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:44:49 LOG4    check_wapp_levels: WAPP-1 power levels:    1.073  1.014    0.982  0.952
2009-Mar-19 00:44:49 LOG4    check_wapp_levels: WAPP-2 power levels:    0.941  1.107    0.982  0.955
2009-Mar-19 00:44:49 LOG4    check_wapp_levels: WAPP-3 power levels:    0.994  1.081    0.915  1.024
2009-Mar-19 00:44:49 LOG4    check_wapp_levels: WAPP-4 power levels:    1.013  0.111    1.118  0.122
2009-Mar-19 00:44:51 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:44:54 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:44:56 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:44:58 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad)
2009-Mar-19 00:45:00 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:45:02 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad)
2009-Mar-19 00:45:04 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad)
2009-Mar-19 00:45:06 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad)
2009-Mar-19 00:45:07 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-19 00:45:07 STOP    end_task: Finishing task 'waiting on WAPP spectra' with status 'OK'
2009-Mar-19 00:45:07 LOG5    end_task: Level: (4)    ID = <10337>    Status = 0 0 0 0  ok
2009-Mar-19 00:45:07 STOP    end_task: Finishing task 'WAPP spectral observation' with status 'OK'
2009-Mar-19 00:45:07 LOG5    end_task: Level: (3)    ID = <10336>    Status = 0 0 0 0  ok
2009-Mar-19 00:45:07 STOP    finish_task: Finishing task 'fixed azimuth drift map'
2009-Mar-19 00:45:07 LOG5    finish_task: Level: (2)    ID = <10303>    Status = 0 0 0 0  ok
2009-Mar-19 00:45:07 DONE    finish_task: DONE finished pattern: fixed azimuth drift map
2009-Mar-19 00:45:07 LOG4    send_obs_status: To obs_status: <1> ENDTASK Finished
2009-Mar-19 00:45:07 END     end_task: Finishing task 'fixed azimuth drift map' with status 'OK'
2009-Mar-19 00:45:07 LOG5    end_task: Level: (2)    ID = <10303>    Status = 0 0 0 0  ok
2009-Mar-19 00:45:07 COMMAND run_command_line: EXECUTING command 19: 'ENDIF'
2009-Mar-19 00:45:07 COMMAND run_command_line: EXECUTING command 22: 'IF LSTSLEW(AGESVC1B_p2_053) < 120829 THEN'
2009-Mar-19 00:45:08 INFO5   is_if_valid: Evaluating condition: LSTSLEW(AGESVC1B_p2_053) < 120829
2009-Mar-19 00:45:08 INFO5   is_if_valid: Condition parsed as: 12.112921 < 12.141388888888889
2009-Mar-19 00:45:08 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=333.82 alfaangle=40.9  epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_053 ra=122900.00 dec=74200.00'
2009-Mar-19 00:45:08 LOG2    check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map'
2009-Mar-19 00:45:08 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad)
2009-Mar-19 00:45:08 LOG4    exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok
2009-Mar-19 00:45:08 LOG1    fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 333.82 40.9 hcorcal 5 tracking no first 1 AGESVC1B_p2_053 122900.00 74200.00 J 8500.0 Heliocentric velocity(optical)'
2009-Mar-19 00:45:08 BEGIN   begin_task: Starting task 'fixed azimuth drift map'
2009-Mar-19 00:45:08 LOG5    begin_task: Level: (2)    ID = <10338>    Status = 0 0 0 0  ok
2009-Mar-19 00:45:08 INFO4   begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1B_p2_051'
2009-Mar-19 00:45:08 INFO1   fixed_driftmap: Starting pattern: Fixed azimuth drift map
2009-Mar-19 00:45:08 LOG4    send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1    INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p2_053}
2009-Mar-19 00:45:08 INFO3   fixed_driftmap: Sending telescope to Az = 333.82 and ZA = 11.86
2009-Mar-19 00:45:08 LOG3    track_source: Calling 'track_source AGESVC1B_p2_053 333.82 11.8645900845 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)'
2009-Mar-19 00:45:08 START   begin_task: Starting task 'sending tracking commands'
2009-Mar-19 00:45:08 LOG5    begin_task: Level: (3)    ID = <10339>    Status = 0 0 0 0  ok
2009-Mar-19 00:45:08 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_053}    INFO {Slewing to source 'AGESVC1B_p2_053' ...}
2009-Mar-19 00:45:08 INFO1   track_source: Starting to track AGESVC1B_p2_053
2009-Mar-19 00:45:08 LOG3    vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_053"
2009-Mar-19 00:45:08 LOG3    vw_send: To DATATAKING: set ra 333.82
2009-Mar-19 00:45:08 LOG3    vw_send: To DATATAKING: set dec 11.8645900845
2009-Mar-19 00:45:08 LOG3    vw_send: To DATATAKING: pnt tr send
2009-Mar-19 00:45:08 LOG3    vw_send: To DATATAKING: pnt tr 333.82 11.8645900845 -CF
2009-Mar-19 00:45:08 LOG3    vw_send: To DATATAKING: dopsetvel 8500.0 hel
2009-Mar-19 00:45:08 STOP    finish_task: Finishing task 'sending tracking commands'
2009-Mar-19 00:45:08 LOG5    finish_task: Level: (3)    ID = <10339>    Status = 0 0 0 0  ok
2009-Mar-19 00:45:08 INFO2   finish_task: DONE finished sending: tracking commands
2009-Mar-19 00:45:08 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:45:08 STOP    end_task: Finishing task 'sending tracking commands' with status 'OK'
2009-Mar-19 00:45:08 LOG5    end_task: Level: (3)    ID = <10339>    Status = 0 0 0 0  ok
2009-Mar-19 00:45:08 START   begin_task: Starting task 'rotate ALFA to +40.9 degrees'
2009-Mar-19 00:45:08 LOG5    begin_task: Level: (3)    ID = <10340>    Status = 0 0 0 0  ok
2009-Mar-19 00:45:08 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA}    INFO {Rotating ALFA to +40.9 degrees ...}
2009-Mar-19 00:45:08 INFO2   rotate_alfa: ALFA commanded to +40.9 degrees
2009-Mar-19 00:45:08 LOG3    sock_errsend: To ALFAMOTOR: POSITION 40.9 REPLY
2009-Mar-19 00:45:08 LOG4    send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...}
2009-Mar-19 00:45:09 START   begin_task: Starting task 'waiting on ALFA rotation'
2009-Mar-19 00:45:09 LOG5    begin_task: Level: (4)    ID = <10341>    Status = 0 0 0 0  ok
2009-Mar-19 00:45:09 LOG4    got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_053"
2009-Mar-19 00:45:09 LOG4    got_cormsg: From DATATAKING: set ra 333.82
2009-Mar-19 00:45:09 LOG4    got_cormsg: From DATATAKING: set dec 11.8645900845
2009-Mar-19 00:45:09 LOG4    got_cormsg: From DATATAKING: vw% 333.82
2009-Mar-19 00:45:09 LOG4    got_cormsg: From DATATAKING: vw% 11.8645900845
2009-Mar-19 00:45:09 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:45:09 LOG4    got_cormsg: From DATATAKING: pnt tr send
2009-Mar-19 00:45:09 LOG4    got_cormsg: From DATATAKING: pnt tr 333.82 11.8645900845 -CF
2009-Mar-19 00:45:09 LOG4    got_cormsg: From DATATAKING: dopsetvel 8500.0 hel
2009-Mar-19 00:45:09 LOG4    got_cormsg: From DATATAKING: vw% vw%
2009-Mar-19 00:45:09 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:45:19 LOG4    exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION"
2009-Mar-19 00:45:19 INFO3   alfa_motor: ALFA rotator in-position +40.90 degrees
2009-Mar-19 00:45:19 STOP    end_task: Finishing task 'waiting on ALFA rotation' with status 'OK'
2009-Mar-19 00:45:19 LOG5    end_task: Level: (4)    ID = <10341>    Status = 0 0 0 0  ok
2009-Mar-19 00:45:19 LOG4    send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy
2009-Mar-19 00:45:19 STOP    finish_task: Finishing task 'rotate ALFA to +40.9 degrees'
2009-Mar-19 00:45:19 LOG5    finish_task: Level: (3)    ID = <10340>    Status = 0 0 0 0  ok
2009-Mar-19 00:45:19 INFO2   finish_task: DONE finished configuration: rotating ALFA to +40.9 degrees
2009-Mar-19 00:45:19 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:45:19 STOP    end_task: Finishing task 'rotate ALFA to +40.9 degrees' with status 'OK'
2009-Mar-19 00:45:19 LOG5    end_task: Level: (3)    ID = <10340>    Status = 0 0 0 0  ok
2009-Mar-19 00:45:19 START   begin_task: Starting task 'waiting on telescope'
2009-Mar-19 00:45:19 LOG5    begin_task: Level: (3)    ID = <10342>    Status = 0 0 0 0  ok
2009-Mar-19 00:45:19 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew    INFO {Waiting for telescope to track source ...}
2009-Mar-19 00:45:19 LOG3    waittrk: Start waittrk 5
2009-Mar-19 00:45:19 START   begin_task: Starting task 'waiting on telescope movement'
2009-Mar-19 00:45:19 LOG5    begin_task: Level: (4)    ID = <10343>    Status = 0 0 0 0  ok
2009-Mar-19 00:45:25 STOP    end_task: Finishing task 'waiting on telescope movement' with status 'OK'
2009-Mar-19 00:45:25 LOG5    end_task: Level: (4)    ID = <10343>    Status = 0 0 0 0  ok
2009-Mar-19 00:45:25 START   begin_task: Starting task 'waiting on telescope on source'
2009-Mar-19 00:45:25 LOG5    begin_task: Level: (4)    ID = <10344>    Status = 0 0 0 0  ok
2009-Mar-19 00:46:36 STOP    end_task: Finishing task 'waiting on telescope on source' with status 'OK'
2009-Mar-19 00:46:36 LOG5    end_task: Level: (4)    ID = <10344>    Status = 0 0 0 0  ok
2009-Mar-19 00:46:36 LOG4    send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy
2009-Mar-19 00:46:36 INFO2   waittrk: Now tracking AGESVC1B_p2_053
2009-Mar-19 00:46:36 LOG4    waittrk: Current telescope position:  Az = 333.44  ZA = 11.85
2009-Mar-19 00:46:36 STOP    finish_task: Finishing task 'waiting on telescope'
2009-Mar-19 00:46:36 LOG5    finish_task: Level: (3)    ID = <10342>    Status = 0 0 0 0  ok
2009-Mar-19 00:46:36 INFO2   finish_task: DONE finished waiting: telescope on source
2009-Mar-19 00:46:36 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:46:36 STOP    end_task: Finishing task 'waiting on telescope' with status 'OK'
2009-Mar-19 00:46:36 LOG5    end_task: Level: (3)    ID = <10342>    Status = 0 0 0 0  ok
2009-Mar-19 00:46:36 START   begin_task: Starting task 'selecting calibration type'
2009-Mar-19 00:46:36 LOG5    begin_task: Level: (3)    ID = <10345>    Status = 0 0 0 0  ok
2009-Mar-19 00:46:36 LOG3    vw_send: To DATATAKING: setcal hcorcal
2009-Mar-19 00:46:37 LOG2    socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE'
2009-Mar-19 00:46:37 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-19 00:46:37 START   begin_task: Starting task 'waiting on setcal'
2009-Mar-19 00:46:37 LOG5    begin_task: Level: (4)    ID = <10346>    Status = 0 0 0 0  ok
2009-Mar-19 00:46:37 LOG4    got_cormsg: From DATATAKING: setcal hcorcal
2009-Mar-19 00:46:37 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-19 00:46:38 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:46:38 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-19 00:46:38 STOP    end_task: Finishing task 'waiting on setcal' with status 'OK'
2009-Mar-19 00:46:38 LOG5    end_task: Level: (4)    ID = <10346>    Status = 0 0 0 0  ok
2009-Mar-19 00:46:38 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'setcal'
2009-Mar-19 00:46:38 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-19 00:46:38 LOG3    socket_wait: To ALFAMON: CAL HI
2009-Mar-19 00:46:38 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-19 00:46:38 LOG5    begin_task: Level: (4)    ID = <10347>    Status = 0 0 0 0  ok
2009-Mar-19 00:46:38 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:46:38 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-19 00:46:38 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-19 00:46:38 LOG5    end_task: Level: (4)    ID = <10347>    Status = 0 0 0 0  ok
2009-Mar-19 00:46:38 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-19 00:46:38 LOG3    to_alfamon: To ALFAMON: CAL HI
2009-Mar-19 00:46:38 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-19 00:46:38 LOG3    socket_wait: To ALFAMON: NOISE ACTIVE
2009-Mar-19 00:46:38 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-19 00:46:38 LOG5    begin_task: Level: (4)    ID = <10348>    Status = 0 0 0 0  ok
2009-Mar-19 00:46:38 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-19 00:46:38 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-19 00:46:38 LOG5    end_task: Level: (4)    ID = <10348>    Status = 0 0 0 0  ok
2009-Mar-19 00:46:38 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-19 00:46:38 LOG3    to_alfamon: To ALFAMON: NOISE ACTIVE
2009-Mar-19 00:46:38 STOP    end_task: Finishing task 'selecting calibration type' with status 'OK'
2009-Mar-19 00:46:38 LOG5    end_task: Level: (3)    ID = <10345>    Status = 0 0 0 0  ok
2009-Mar-19 00:46:38 LOG4    send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time}
2009-Mar-19 00:46:38 INFO2   astwait: Waiting for 24 seconds from 04:46:38 to 04:47:02 UTC ...
2009-Mar-19 00:46:38 LOG4    send_obs_status: To obs_status: <1> TASKTIME 24 BITMAP stat_wait MESSAGE {Waiting ...}
2009-Mar-19 00:46:38 START   begin_task: Starting task 'waiting on waiting for AST time'
2009-Mar-19 00:46:38 LOG5    begin_task: Level: (3)    ID = <10349>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:02 STOP    end_task: Finishing task 'waiting on waiting for AST time' with status 'OK'
2009-Mar-19 00:47:02 LOG5    end_task: Level: (3)    ID = <10349>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:02 INFO3   astwait: Finished waiting
2009-Mar-19 00:47:02 LOG4    send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy
2009-Mar-19 00:47:02 LOG5    dopset_later: Calling 'dopset_later 60.986451688380534'
2009-Mar-19 00:47:02 INFO3   dopset_later: Setting Doppler correction for 00:48:02 (61 seconds from now)
2009-Mar-19 00:47:02 LOG5    antvel: Calling 'antvel 333.820000 11.864590 F 60.986451688380534'
2009-Mar-19 00:47:02 LOG2    antvel: Transforming current Az = 333.82  ZA = 11.86 to apparent RA = 12:29:30.1  Dec = +07:38:42.1
2009-Mar-19 00:47:02 LOG2    antvel: Parameters to Doppler: Heliocentric 17282 2009 78 0.0
2009-Mar-19 00:47:02 INFO5   antvel: Computed antenna velocity: -3.09012 km/s
2009-Mar-19 00:47:02 LOG3    dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-3.0901202066 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786
2009-Mar-19 00:47:02 INFO4   dopset_gen: New sky frequencies: 1381.257666 1381.257666 1381.257666 1381.257666 1381.257666 1381.257666 1381.257666 1381.257666 1381.257666
2009-Mar-19 00:47:02 LOG3    dopset_gen: Parameters for 'sky2syn': skycent=1381.257666 sky0=1381.257666 sky1=1381.257666 sky2=1381.257666 sky3=1381.257666 sky4=1381.257666 sky5=1381.257666 sky6=1381.257666 sky7=1381.257666 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250
2009-Mar-19 00:47:02 LOG2    dopset_gen: Result from 'sky2syn': 1631.257666 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000
2009-Mar-19 00:47:02 LOG3    vw_send: To DATATAKING: if1 {if1_syn1 1631257666.0}
2009-Mar-19 00:47:02 LOG3    vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-19 00:47:02 LOG4    send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation}
2009-Mar-19 00:47:02 INFO3   fixed_driftmap: Switching to tracking mode for calibration
2009-Mar-19 00:47:02 INFO5   fixed_driftmap: Tracking J2000 position:  RA = 12:28:04.0  Dec = +07:41:45.3
2009-Mar-19 00:47:02 LOG3    track_source: Calling 'track_source AGESVC1B_p2_053 122804.0 074145.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)'
2009-Mar-19 00:47:02 START   begin_task: Starting task 'sending tracking commands'
2009-Mar-19 00:47:02 LOG5    begin_task: Level: (3)    ID = <10350>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:02 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_053}    INFO {Slewing to source 'AGESVC1B_p2_053' ...}
2009-Mar-19 00:47:02 INFO1   track_source: Starting to track AGESVC1B_p2_053
2009-Mar-19 00:47:02 LOG3    vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_053"
2009-Mar-19 00:47:02 LOG3    vw_send: To DATATAKING: set ra 122804.0
2009-Mar-19 00:47:02 LOG3    vw_send: To DATATAKING: set dec 074145.3
2009-Mar-19 00:47:02 LOG3    vw_send: To DATATAKING: pnt tr send
2009-Mar-19 00:47:02 LOG3    vw_send: To DATATAKING: pnt tr 122804.0 074145.3 -CJ
2009-Mar-19 00:47:02 LOG3    vw_send: To DATATAKING: dopsetvel 8500.0 hel
2009-Mar-19 00:47:02 STOP    finish_task: Finishing task 'sending tracking commands'
2009-Mar-19 00:47:02 LOG5    finish_task: Level: (3)    ID = <10350>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:02 INFO2   finish_task: DONE finished sending: tracking commands
2009-Mar-19 00:47:02 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:47:02 STOP    end_task: Finishing task 'sending tracking commands' with status 'OK'
2009-Mar-19 00:47:02 LOG5    end_task: Level: (3)    ID = <10350>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:02 START   begin_task: Starting task 'waiting on telescope'
2009-Mar-19 00:47:02 LOG5    begin_task: Level: (3)    ID = <10351>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:02 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew    INFO {Waiting for telescope to track source ...}
2009-Mar-19 00:47:02 LOG3    waittrk: Start waittrk 5
2009-Mar-19 00:47:02 START   begin_task: Starting task 'waiting on telescope movement'
2009-Mar-19 00:47:02 LOG5    begin_task: Level: (4)    ID = <10352>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:02 LOG4    got_cormsg: From DATATAKING: if1 {if1_syn1 1631257666.0}
2009-Mar-19 00:47:02 LOG4    got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0}
2009-Mar-19 00:47:02 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:47:02 LOG4    got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_053"
2009-Mar-19 00:47:02 LOG4    got_cormsg: From DATATAKING: vw% vw%
2009-Mar-19 00:47:02 LOG4    got_cormsg: From DATATAKING: set ra 122804.0
2009-Mar-19 00:47:02 LOG4    got_cormsg: From DATATAKING: set dec 074145.3
2009-Mar-19 00:47:02 LOG4    got_cormsg: From DATATAKING: pnt tr send
2009-Mar-19 00:47:02 LOG4    got_cormsg: From DATATAKING: pnt tr 122804.0 074145.3 -CJ
2009-Mar-19 00:47:02 LOG4    got_cormsg: From DATATAKING: 122804.0
2009-Mar-19 00:47:02 LOG4    got_cormsg: From DATATAKING: vw% 074145.3
2009-Mar-19 00:47:02 LOG4    got_cormsg: From DATATAKING: vw% vw% vw%
2009-Mar-19 00:47:02 LOG4    got_cormsg: From DATATAKING: dopsetvel 8500.0 hel
2009-Mar-19 00:47:02 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:47:07 STOP    end_task: Finishing task 'waiting on telescope movement' with status 'OK'
2009-Mar-19 00:47:07 LOG5    end_task: Level: (4)    ID = <10352>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:07 START   begin_task: Starting task 'waiting on telescope on source'
2009-Mar-19 00:47:07 LOG5    begin_task: Level: (4)    ID = <10353>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:09 STOP    end_task: Finishing task 'waiting on telescope on source' with status 'OK'
2009-Mar-19 00:47:09 LOG5    end_task: Level: (4)    ID = <10353>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:09 LOG4    send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy
2009-Mar-19 00:47:09 INFO2   waittrk: Now tracking AGESVC1B_p2_053
2009-Mar-19 00:47:09 LOG4    waittrk: Current telescope position:  Az = 333.52  ZA = 11.84
2009-Mar-19 00:47:09 STOP    finish_task: Finishing task 'waiting on telescope'
2009-Mar-19 00:47:09 LOG5    finish_task: Level: (3)    ID = <10351>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:09 INFO2   finish_task: DONE finished waiting: telescope on source
2009-Mar-19 00:47:09 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:47:09 STOP    end_task: Finishing task 'waiting on telescope' with status 'OK'
2009-Mar-19 00:47:09 LOG5    end_task: Level: (3)    ID = <10351>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:09 START   begin_task: Starting task 'adjusting WAPP power'
2009-Mar-19 00:47:09 LOG5    begin_task: Level: (3)    ID = <10354>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:09 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT    BITMAP stat_power INFO {Adjusting WAPP power ...}
2009-Mar-19 00:47:09 INFO2   adjust_power: Starting to adjust WAPP power
2009-Mar-19 00:47:09 LOG3    vw_send: To DATATAKING: adjpwrif2 
2009-Mar-19 00:47:09 LOG2    socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE'
2009-Mar-19 00:47:09 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-19 00:47:09 START   begin_task: Starting task 'waiting on adjpwrif2'
2009-Mar-19 00:47:09 LOG5    begin_task: Level: (4)    ID = <10355>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:09 LOG4    got_cormsg: From DATATAKING: adjpwrif2
2009-Mar-19 00:47:09 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-19 00:47:12 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:47:12 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-19 00:47:12 STOP    end_task: Finishing task 'waiting on adjpwrif2' with status 'OK'
2009-Mar-19 00:47:12 LOG5    end_task: Level: (4)    ID = <10355>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:12 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2'
2009-Mar-19 00:47:12 START   begin_task: Starting task 'adjusting WAPP power'
2009-Mar-19 00:47:12 LOG5    begin_task: Level: (4)    ID = <10356>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:12 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT    BITMAP stat_power INFO {Adjusting power ...}
2009-Mar-19 00:47:12 LOG3    sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-19 00:47:12 LOG3    sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-19 00:47:12 LOG3    sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-19 00:47:13 LOG3    sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1
2009-Mar-19 00:47:13 START   begin_task: Starting task 'waiting on adjust WAPP power'
2009-Mar-19 00:47:13 LOG5    begin_task: Level: (5)    ID = <10357>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:13 LOG4    WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1'
2009-Mar-19 00:47:13 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:47:13 INFO2   WAPP=1-auto_atten_dual: Attenuators beam 0:  7  6 dB  ---  beam 1:  7  7 dB
2009-Mar-19 00:47:13 INFO2   WAPP=3-auto_atten_dual: Attenuators beam 4:  3  1 dB  ---  beam 5:  5  4 dB
2009-Mar-19 00:47:13 INFO2   WAPP=2-auto_atten_dual: Attenuators beam 2:  6  4 dB  ---  beam 3:  4  3 dB
2009-Mar-19 00:47:13 INFO2   WAPP=4-auto_atten_dual: Attenuators beam 6:  3  0 dB  ---  beam 7:  2  0 dB
2009-Mar-19 00:47:13 INFO1   WAPP=1+2+3+4-adjust_power: DONE adjusting power
2009-Mar-19 00:47:13 STOP    end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK'
2009-Mar-19 00:47:13 LOG5    end_task: Level: (5)    ID = <10357>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:13 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 0:  1.043  0.983    ALFA beam 1:  0.979  0.945
2009-Mar-19 00:47:13 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 2:  1.118  1.060    ALFA beam 3:  0.940  0.931
2009-Mar-19 00:47:13 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 4:  0.954  1.044    ALFA beam 5:  1.133  0.981
2009-Mar-19 00:47:13 INFO2   wapp_adjpwr: WAPP power:   ALFA beam 6:  1.001  0.111    ALFA beam 7:  1.107  0.122
2009-Mar-19 00:47:13 STOP    finish_task: Finishing task 'adjusting WAPP power'
2009-Mar-19 00:47:13 LOG5    finish_task: Level: (4)    ID = <10356>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:13 INFO3   finish_task: DONE finished adjusting: WAPP power
2009-Mar-19 00:47:13 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:47:13 STOP    end_task: Finishing task 'adjusting WAPP power' with status 'OK'
2009-Mar-19 00:47:13 LOG5    end_task: Level: (4)    ID = <10356>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:13 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_busy
2009-Mar-19 00:47:13 STOP    finish_task: Finishing task 'adjusting WAPP power'
2009-Mar-19 00:47:13 LOG5    finish_task: Level: (3)    ID = <10354>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:13 INFO2   finish_task: DONE finished adjusting: WAPP power levels
2009-Mar-19 00:47:13 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:47:13 STOP    end_task: Finishing task 'adjusting WAPP power' with status 'OK'
2009-Mar-19 00:47:13 LOG5    end_task: Level: (3)    ID = <10354>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:13 LOG3    send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin
2009-Mar-19 00:47:13 LOG3    send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin
2009-Mar-19 00:47:13 LOG3    send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin
2009-Mar-19 00:47:13 LOG3    send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin
2009-Mar-19 00:47:13 LOG2    take_cal: Calling 'take_cal hcorcal 5 0'
2009-Mar-19 00:47:13 START   begin_task: Starting task 'WAPP calibration'
2009-Mar-19 00:47:13 LOG5    begin_task: Level: (3)    ID = <10358>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:13 LOG4    send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration}    INFO {Making WAPP calibration ...}
2009-Mar-19 00:47:13 START   begin_task: Starting task 'selecting calibration type'
2009-Mar-19 00:47:13 LOG5    begin_task: Level: (4)    ID = <10359>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:13 LOG3    vw_send: To DATATAKING: setcal hcorcal
2009-Mar-19 00:47:13 LOG2    socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE'
2009-Mar-19 00:47:13 LOG3    socket_wait: To DATATAKING: puts {DONE}; flush stdout
2009-Mar-19 00:47:13 START   begin_task: Starting task 'waiting on setcal'
2009-Mar-19 00:47:13 LOG5    begin_task: Level: (5)    ID = <10360>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:13 LOG4    WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin'
2009-Mar-19 00:47:14 LOG4    got_cormsg: From DATATAKING: setcal hcorcal
2009-Mar-19 00:47:14 LOG4    got_cormsg: From DATATAKING: puts {DONE}; flush stdout
2009-Mar-19 00:47:14 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:47:14 LOG4    got_cormsg: From DATATAKING: DONE
2009-Mar-19 00:47:14 STOP    end_task: Finishing task 'waiting on setcal' with status 'OK'
2009-Mar-19 00:47:14 LOG5    end_task: Level: (5)    ID = <10360>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:14 LOG3    socket_wait: DONE with sockwait on DATATAKING for 'setcal'
2009-Mar-19 00:47:14 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-19 00:47:14 LOG3    socket_wait: To ALFAMON: CAL HI
2009-Mar-19 00:47:14 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-19 00:47:14 LOG5    begin_task: Level: (5)    ID = <10361>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:14 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:47:14 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-19 00:47:14 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-19 00:47:14 LOG5    end_task: Level: (5)    ID = <10361>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:14 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-19 00:47:14 LOG3    to_alfamon: To ALFAMON: CAL HI
2009-Mar-19 00:47:14 LOG2    socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK'
2009-Mar-19 00:47:14 LOG3    socket_wait: To ALFAMON: NOISE ACTIVE
2009-Mar-19 00:47:14 START   begin_task: Starting task 'waiting on command to ALFA'
2009-Mar-19 00:47:14 LOG5    begin_task: Level: (5)    ID = <10362>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:14 LOG4    got_alfamon: From ALFAMON: ACK
2009-Mar-19 00:47:14 STOP    end_task: Finishing task 'waiting on command to ALFA' with status 'OK'
2009-Mar-19 00:47:14 LOG5    end_task: Level: (5)    ID = <10362>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:14 LOG3    socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA'
2009-Mar-19 00:47:14 LOG3    to_alfamon: To ALFAMON: NOISE ACTIVE
2009-Mar-19 00:47:14 STOP    end_task: Finishing task 'selecting calibration type' with status 'OK'
2009-Mar-19 00:47:14 LOG5    end_task: Level: (4)    ID = <10359>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:14 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...}
2009-Mar-19 00:47:14 LOG3    wapp_calcontrol: To CALCONTROL: CALON
2009-Mar-19 00:47:14 LOG3    sock_errsend: To CALCONTROL: CALON STATUS
2009-Mar-19 00:47:14 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-19 00:47:14 LOG5    begin_task: Level: (4)    ID = <10363>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:14 NOTE    WAPPDATA-new_file: New FITS file: wapp.20090319.a2048.0002.fits
2009-Mar-19 00:47:14 LOG4    send_obs_status: To obs_status: <0> FILENAME {wapp.20090319.a2048.0002.fits}
2009-Mar-19 00:47:14 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-19 00:47:14 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x03
2009-Mar-19 00:47:14 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-19 00:47:14 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-19 00:47:14 LOG5    end_task: Level: (4)    ID = <10363>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:14 LOG4    send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...}
2009-Mar-19 00:47:14 LOG4    take_data: Calling 'take_data 5 5 CAL ON -'
2009-Mar-19 00:47:14 START   begin_task: Starting task 'WAPP spectral observation'
2009-Mar-19 00:47:14 LOG5    begin_task: Level: (4)    ID = <10364>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:14 LOG5    log_alfabeam: Parameters: 12.467777777777778 7.6959166666666681 12.128296 2009.2136421654372 40.899925
2009-Mar-19 00:47:14 LOG4    log_alfabeam: ALFABEAM 0  12.467777777777776   7.695916666666674
2009-Mar-19 00:47:14 LOG4    log_alfabeam: ALFABEAM 1  12.465866097994352   7.798191048571135
2009-Mar-19 00:47:14 LOG4    log_alfabeam: ALFABEAM 2  12.461605809225270   7.730652900176428
2009-Mar-19 00:47:14 LOG4    log_alfabeam: ALFABEAM 3  12.463465649378687   7.628160332490982
2009-Mar-19 00:47:14 LOG4    log_alfabeam: ALFABEAM 4  12.469669442327199   7.593536534563687
2009-Mar-19 00:47:14 LOG4    log_alfabeam: ALFABEAM 5  12.473986558083256   7.661857902572813
2009-Mar-19 00:47:14 LOG4    log_alfabeam: ALFABEAM 6  12.472043123786010   7.764016299276487
2009-Mar-19 00:47:14 INFO2   take_data: Starting WAPP scan: 907800007
2009-Mar-19 00:47:15 LOG4    send_obs_status: To obs_status: <0> TASKTIME 5
2009-Mar-19 00:47:15 START   begin_task: Starting task 'waiting on WAPP spectra'
2009-Mar-19 00:47:15 LOG5    begin_task: Level: (5)    ID = <10365>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:15 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-19 00:47:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:47:15 LOG4    check_wapp_levels: WAPP-1 power levels:    1.043  0.983    0.979  0.945
2009-Mar-19 00:47:15 LOG4    check_wapp_levels: WAPP-2 power levels:    1.118  1.060    0.940  0.931
2009-Mar-19 00:47:15 LOG4    check_wapp_levels: WAPP-3 power levels:    0.954  1.044    1.133  0.981
2009-Mar-19 00:47:15 LOG4    check_wapp_levels: WAPP-4 power levels:    1.001  0.111    1.107  0.122
2009-Mar-19 00:47:15 INFO1   WAPP=1+2+3+4-start_spectra: start sec 17236.00
2009-Mar-19 00:47:21 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.257666 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-19 00:47:21 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:47:21 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:47:21 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:47:21 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:47:21 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.442 (still bad)
2009-Mar-19 00:47:21 LOG3    WAPP=2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:47:21 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:47:21 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-19 00:47:21 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:47:21 LOG3    WAPP=1-save_rfcalc: Channel 5:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:47:21 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-19 00:47:21 STOP    end_task: Finishing task 'waiting on WAPP spectra' with status 'OK'
2009-Mar-19 00:47:21 LOG5    end_task: Level: (5)    ID = <10365>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:21 STOP    end_task: Finishing task 'WAPP spectral observation' with status 'OK'
2009-Mar-19 00:47:21 LOG5    end_task: Level: (4)    ID = <10364>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:21 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...}
2009-Mar-19 00:47:21 LOG3    wapp_calcontrol: To CALCONTROL: CALOFF
2009-Mar-19 00:47:21 LOG3    sock_errsend: To CALCONTROL: CALOFF STATUS
2009-Mar-19 00:47:21 START   begin_task: Starting task 'waiting on CALCONTROL command'
2009-Mar-19 00:47:21 LOG5    begin_task: Level: (4)    ID = <10366>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:22 LOG3    CALCONTROL-caltrig: Software trigger
2009-Mar-19 00:47:22 LOG1    CALCONTROL-caltrig: Cal/trigger control status 0x02
2009-Mar-19 00:47:22 LOG3    got_calcontrol: Received status OK from CALCONTROL
2009-Mar-19 00:47:22 STOP    end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK'
2009-Mar-19 00:47:22 LOG5    end_task: Level: (4)    ID = <10366>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:22 LOG4    send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...}
2009-Mar-19 00:47:22 LOG4    take_data: Calling 'take_data 5 5 CAL OFF -'
2009-Mar-19 00:47:22 START   begin_task: Starting task 'WAPP spectral observation'
2009-Mar-19 00:47:22 LOG5    begin_task: Level: (4)    ID = <10367>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:22 LOG5    log_alfabeam: Parameters: 12.467777777777778 7.6959166666666681 12.130245 2009.2136423872537 40.899925
2009-Mar-19 00:47:22 LOG4    log_alfabeam: ALFABEAM 0  12.467777777777767   7.695916666666667
2009-Mar-19 00:47:22 LOG4    log_alfabeam: ALFABEAM 1  12.465880698720060   7.798251077245222
2009-Mar-19 00:47:22 LOG4    log_alfabeam: ALFABEAM 2  12.461610801991561   7.730847913936791
2009-Mar-19 00:47:22 LOG4    log_alfabeam: ALFABEAM 3  12.463455960121316   7.628296722686335
2009-Mar-19 00:47:22 LOG4    log_alfabeam: ALFABEAM 4  12.469654813170788   7.593477028549246
2009-Mar-19 00:47:22 LOG4    log_alfabeam: ALFABEAM 5  12.473981699923108   7.661662460524781
2009-Mar-19 00:47:22 LOG4    log_alfabeam: ALFABEAM 6  12.472052813138710   7.763881758209156
2009-Mar-19 00:47:22 INFO2   take_data: Starting WAPP scan: 907800008
2009-Mar-19 00:47:22 LOG4    send_obs_status: To obs_status: <0> TASKTIME 5
2009-Mar-19 00:47:22 START   begin_task: Starting task 'waiting on WAPP spectra'
2009-Mar-19 00:47:22 LOG5    begin_task: Level: (5)    ID = <10368>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:22 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-19 00:47:22 INFO1   WAPP=1+2+3+4-start_spectra: start sec 17243.00
2009-Mar-19 00:47:27 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.585 (still bad)
2009-Mar-19 00:47:28 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.257666 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-19 00:47:28 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:47:28 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:47:28 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:47:28 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:47:28 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:47:28 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:47:28 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-19 00:47:28 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:47:28 INFO1   WAPP=1+2+3+4-start_spectra: Skipping Tsys
2009-Mar-19 00:47:28 INFO1   WAPP=1+2+3+4-start_spectra: DONE with spectral line observation
2009-Mar-19 00:47:28 STOP    end_task: Finishing task 'waiting on WAPP spectra' with status 'OK'
2009-Mar-19 00:47:28 LOG5    end_task: Level: (5)    ID = <10368>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:28 STOP    end_task: Finishing task 'WAPP spectral observation' with status 'OK'
2009-Mar-19 00:47:28 LOG5    end_task: Level: (4)    ID = <10367>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:28 LOG4    send_obs_status: To obs_status: <0> BITMAP stat_busy
2009-Mar-19 00:47:28 STOP    finish_task: Finishing task 'WAPP calibration'
2009-Mar-19 00:47:28 LOG5    finish_task: Level: (3)    ID = <10358>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:28 INFO2   finish_task: DONE finished calibration: WAPP calibration
2009-Mar-19 00:47:28 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:47:28 STOP    end_task: Finishing task 'WAPP calibration' with status 'OK'
2009-Mar-19 00:47:28 LOG5    end_task: Level: (3)    ID = <10358>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:29 LOG4    send_obs_status: To obs_status: <1> INFO {Returning to drift position}
2009-Mar-19 00:47:29 INFO4   fixed_driftmap: Sending telescope back to drift position Az = 333.82 and ZA = 11.86
2009-Mar-19 00:47:29 LOG3    track_source: Calling 'track_source AGESVC1B_p2_053 333.82 11.8645900845 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)'
2009-Mar-19 00:47:29 START   begin_task: Starting task 'sending tracking commands'
2009-Mar-19 00:47:29 LOG5    begin_task: Level: (3)    ID = <10369>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:29 LOG4    send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_053}    INFO {Slewing to source 'AGESVC1B_p2_053' ...}
2009-Mar-19 00:47:29 INFO1   track_source: Starting to track AGESVC1B_p2_053
2009-Mar-19 00:47:29 LOG3    vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_053"
2009-Mar-19 00:47:29 LOG3    vw_send: To DATATAKING: set ra 333.82
2009-Mar-19 00:47:29 LOG3    vw_send: To DATATAKING: set dec 11.8645900845
2009-Mar-19 00:47:29 LOG3    vw_send: To DATATAKING: pnt tr send
2009-Mar-19 00:47:29 LOG3    vw_send: To DATATAKING: pnt tr 333.82 11.8645900845 -CF
2009-Mar-19 00:47:29 LOG3    vw_send: To DATATAKING: dopsetvel 8500.0 hel
2009-Mar-19 00:47:29 STOP    finish_task: Finishing task 'sending tracking commands'
2009-Mar-19 00:47:29 LOG5    finish_task: Level: (3)    ID = <10369>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:29 INFO2   finish_task: DONE finished sending: tracking commands
2009-Mar-19 00:47:29 LOG4    send_obs_status: To obs_status: <0> ENDTASK Finished
2009-Mar-19 00:47:29 STOP    end_task: Finishing task 'sending tracking commands' with status 'OK'
2009-Mar-19 00:47:29 LOG5    end_task: Level: (3)    ID = <10369>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:29 LOG1    fixed_driftmap: Parameters: HA = -00:21:00.3  Start = 12:08:30.0  LST = 12:07:55.9  diff = 34.1 secs
2009-Mar-19 00:47:29 INFO2   fixed_driftmap: Waiting 32.1 seconds for RA 12:29:30
2009-Mar-19 00:47:29 INFO2   lstwait: Waiting for 32 secs from LST 12:07:56 to LST 12:08:28 ...
2009-Mar-19 00:47:29 LOG4    send_obs_status: To obs_status: <1> TASKTIME 31.993829877181923 BITMAP stat_wait MESSAGE {Waiting ...}
2009-Mar-19 00:47:29 START   begin_task: Starting task 'waiting on wait on LST'
2009-Mar-19 00:47:29 LOG5    begin_task: Level: (3)    ID = <10370>    Status = 0 0 0 0  ok
2009-Mar-19 00:47:29 LOG4    got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_053"
2009-Mar-19 00:47:29 LOG4    got_cormsg: From DATATAKING: set ra 333.82
2009-Mar-19 00:47:29 LOG4    got_cormsg: From DATATAKING: set dec 11.8645900845
2009-Mar-19 00:47:29 LOG4    got_cormsg: From DATATAKING: vw% 333.82
2009-Mar-19 00:47:29 LOG4    got_cormsg: From DATATAKING: vw% 11.8645900845
2009-Mar-19 00:47:29 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:47:29 LOG4    got_cormsg: From DATATAKING: pnt tr send
2009-Mar-19 00:47:29 LOG4    got_cormsg: From DATATAKING: pnt tr 333.82 11.8645900845 -CF
2009-Mar-19 00:47:29 LOG4    got_cormsg: From DATATAKING: dopsetvel 8500.0 hel
2009-Mar-19 00:47:29 LOG4    got_cormsg: From DATATAKING: vw% vw%
2009-Mar-19 00:47:29 LOG4    got_cormsg: From DATATAKING: vw%
2009-Mar-19 00:47:33 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.133 (still bad)
2009-Mar-19 00:48:01 STOP    end_task: Finishing task 'waiting on wait on LST' with status 'OK'
2009-Mar-19 00:48:01 LOG5    end_task: Level: (3)    ID = <10370>    Status = 0 0 0 0  ok
2009-Mar-19 00:48:01 LOG4    lstwait: Finished waiting 1.01 seconds late
2009-Mar-19 00:48:01 INFO3   lstwait: Finished waiting
2009-Mar-19 00:48:01 LOG4    send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy
2009-Mar-19 00:48:01 INFO2   fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1
2009-Mar-19 00:48:01 LOG4    send_obs_status: To obs_status: <1> LOOP 1
2009-Mar-19 00:48:01 LOG4    send_obs_status: To obs_status: <1> INFO {Making drift scan}
2009-Mar-19 00:48:01 LOG4    send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...}
2009-Mar-19 00:48:01 LOG4    take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -'
2009-Mar-19 00:48:01 START   begin_task: Starting task 'WAPP spectral observation'
2009-Mar-19 00:48:01 LOG5    begin_task: Level: (3)    ID = <10371>    Status = 0 0 0 0  ok
2009-Mar-19 00:48:01 LOG5    log_alfabeam: Can't log alfabeam, not J2000
2009-Mar-19 00:48:01 INFO2   take_data: Starting WAPP scan: 907800009
2009-Mar-19 00:48:02 LOG4    send_obs_status: To obs_status: <0> TASKTIME 1200
2009-Mar-19 00:48:02 START   begin_task: Starting task 'waiting on WAPP spectra'
2009-Mar-19 00:48:02 LOG5    begin_task: Level: (4)    ID = <10372>    Status = 0 0 0 0  ok
2009-Mar-19 00:48:02 LOG4    WAPP=1+2+3+4-wappcon: Received a FITS-header block
2009-Mar-19 00:48:02 INFO1   WAPP=1+2+3+4-start_spectra: start sec 17283.00
2009-Mar-19 00:48:04 LOG3    WAPP=1+2+3+4-save_rfcalc: Up: 1631.257666 MHz   ---   rfnum = 17   ifnum = 6   inpfrq = 4
2009-Mar-19 00:48:04 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 1:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:48:04 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 2:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:48:04 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 3:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:48:04 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 4:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1760.000000 MHz
2009-Mar-19 00:48:04 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 5:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:48:04 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 6:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:48:04 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 7:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1150.000000 MHz
2009-Mar-19 00:48:04 LOG3    WAPP=1+2+3+4-save_rfcalc: Channel 8:   Sky freq = 1381.257666 MHz   Flip = 1   Band = 0   Mixer = 1025.000000 MHz
2009-Mar-19 00:48:04 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.133 (still bad)
2009-Mar-19 00:48:06 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.133 (still bad)
2009-Mar-19 00:48:08 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.134 (still bad)
2009-Mar-19 00:48:10 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.138 (still bad)
2009-Mar-19 00:48:12 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.134 (still bad)
2009-Mar-19 00:48:14 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.133 (still bad)
2009-Mar-19 00:48:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)!
2009-Mar-19 00:48:16 LOG4    check_wapp_levels: WAPP-1 power levels:    1.044  0.994    0.981  0.949
2009-Mar-19 00:48:16 LOG4    check_wapp_levels: WAPP-2 power levels:    1.117  1.060    0.940  0.933
2009-Mar-19 00:48:16 LOG4    check_wapp_levels: WAPP-3 power levels:    0.953  1.042    1.136  0.985
2009-Mar-19 00:48:16 LOG4    check_wapp_levels: WAPP-4 power levels:    1.005  0.111    1.111  0.122
2009-Mar-19 00:48:18 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.133 (still bad)
2009-Mar-19 00:48:20 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.135 (still bad)
2009-Mar-19 00:48:22 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.136 (still bad)
2009-Mar-19 00:48:24 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.134 (still bad)
2009-Mar-19 00:48:26 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.133 (still bad)
2009-Mar-19 00:48:28 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.137 (still bad)
2009-Mar-19 00:48:30 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.132 (still bad)
2009-Mar-19 00:48:32 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.137 (still bad)
2009-Mar-19 00:48:34 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.137 (still bad)
2009-Mar-19 00:48:36 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.135 (still bad)
2009-Mar-19 00:48:38 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.136 (still bad)
2009-Mar-19 00:48:40 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.135 (still bad)
2009-Mar-19 00:48:42 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.134 (still bad)
2009-Mar-19 00:48:44 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.134 (still bad)
2009-Mar-19 00:48:46 INFO5   check_wapp_levels: WAPP power levels are between 0.111 and 1.136 (still bad)
2009-Mar-19 00:48:48 INFO5   check_wapp_levels: