2009-Mar-08 22:31:36 BEGIN executive: CIMA executive starting ... 2009-Mar-08 22:31:36 NOTE executive: STARTING NEW CIMA SESSION 2009-Mar-08 22:31:36 INFO1 executive: Using CIMA version 3.0.10 'normal' from 2008-12-29 17:18 2009-Mar-08 22:31:36 INFO4 executive: This is an ON-LINE session 2009-Mar-08 22:31:36 INFO4 executive: This is a LOCAL session 2009-Mar-08 22:31:36 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Mar-08 22:31:36 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'R Minchin' 2009-Mar-08 22:31:36 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20090308' 2009-Mar-08 22:31:37 LOG2 log_preferences: Currently applied preferences: 2009-Mar-08 22:31:37 LOG2 log_preferences: prefs(dailylog) = daily 2009-Mar-08 22:31:37 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Mar-08 22:31:37 LOG2 log_preferences: prefs(datawindow) = ignore 2009-Mar-08 22:31:37 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Mar-08 22:31:37 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Mar-08 22:31:37 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Mar-08 22:31:37 LOG2 log_preferences: prefs(logcolours) = full 2009-Mar-08 22:31:37 LOG2 log_preferences: prefs(displaylevel) = INFO3 2009-Mar-08 22:31:37 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Mar-08 22:31:37 LOG2 log_preferences: prefs(displayformat) = short 2009-Mar-08 22:31:37 LOG2 log_preferences: prefs(logformat) = new 2009-Mar-08 22:31:37 LOG2 log_preferences: prefs(fontsize) = 4 2009-Mar-08 22:31:37 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Mar-08 22:31:37 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2009-Mar-08 22:31:37 ALERT executive: CIMA executive ready 2009-Mar-08 22:31:38 NOTE frontend: CIMA frontend ready 2009-Mar-08 22:31:40 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Mar-08 22:31:40 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Mar-08 22:31:40 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Mar-08 22:31:40 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Mar-08 22:31:41 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Mar-08 22:31:41 NOTE select_receiver: Starting to select receiver ALFA 2009-Mar-08 22:31:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Mar-08 22:31:41 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2009-Mar-08 22:31:41 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Mar-08 22:31:41 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Mar-08 22:31:41 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Mar-08 22:31:41 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Mar-08 22:31:41 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Mar-08 22:31:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-08 22:31:41 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Mar-08 22:31:41 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Mar-08 22:31:41 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2009-Mar-08 22:31:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:31:41 LOG4 got_cormsg: From DATATAKING: setup 2009-Mar-08 22:31:49 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2009-Mar-08 22:31:49 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2009-Mar-08 22:31:49 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Mar-08 22:31:49 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Mar-08 22:31:49 LOG4 got_cormsg: From DATATAKING: 2009-Mar-08 22:31:49 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2009-Mar-08 22:31:49 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Mar-08 22:31:49 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Mar-08 22:31:49 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Mar-08 22:31:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Mar-08 22:31:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Mar-08 22:31:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Mar-08 22:31:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Mar-08 22:31:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Mar-08 22:31:49 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Mar-08 22:31:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:31:49 LOG4 got_cormsg: From DATATAKING: online.. exit cmd to quit. 2009-Mar-08 22:31:49 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Mar-08 22:31:49 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2009-Mar-08 22:31:49 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2009-Mar-08 22:31:49 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Mar-08 22:31:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:31:49 LOG4 got_cormsg: From DATATAKING: 2009-Mar-08 22:31:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:31:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:31:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:31:57 INFO1 CIMA-run_command_file: Transferring command file '090308.cmd ' to executive ... 2009-Mar-08 22:31:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2009-Mar-08 22:31:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2009-Mar-08 22:31:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 5 {CATALOG AGESFull.cat} 2009-Mar-08 22:31:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF LSTSLEW(AGES3193_p2_018) < 094033 THEN} 2009-Mar-08 22:31:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {FIXEDDRIFT az=210.41 alfaangle=-8.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_018 ra=95300.00 dec=232730.00} 2009-Mar-08 22:31:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {ENDIF} 2009-Mar-08 22:31:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 15 {IF LSTSLEW(AGES3193_p2_026) < 100633 THEN} 2009-Mar-08 22:31:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 16 {FIXEDDRIFT az=148.54 alfaangle=47.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_026 ra=95300.00 dec=231530.00} 2009-Mar-08 22:31:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 19 {ENDIF} 2009-Mar-08 22:31:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 22 {IF LSTSLEW(AGES3193_p2_028) < 102933 THEN} 2009-Mar-08 22:31:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 23 {FIXEDDRIFT az=121.29 alfaangle=77.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_028 ra=95300.00 dec=231230.00} 2009-Mar-08 22:31:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 26 {ENDIF} 2009-Mar-08 22:31:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 29 {IF LSTSLEW(AGES3193_p2_030) < 105232 THEN} 2009-Mar-08 22:31:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 30 {FIXEDDRIFT az=111.56 alfaangle=-89.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_030 ra=95300.00 dec=230930.00} 2009-Mar-08 22:31:58 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 33 {ENDIF} 2009-Mar-08 22:31:58 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Mar-08 22:31:58 LOG4 exec_msg: From OBSERVER: run_command_file 090308.cmd 1 1 15 2009-Mar-08 22:31:58 LOG4 run_command_file: Calling 'run_command_file 090308.cmd 1 1 15' 2009-Mar-08 22:31:58 BEGIN begin_task: Starting task 'running command file '090308.cmd'' 2009-Mar-08 22:31:58 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Mar-08 22:31:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '090308.cmd' ...} 2009-Mar-08 22:31:58 NOTE run_command_file: Starting execution of command file '090308.cmd' from line 1 2009-Mar-08 22:31:58 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2009-Mar-08 22:31:58 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Mar-08 22:31:58 NOTE CIMA-check_config_file: File 'ages_config.conf' contains an ALFA set-up which will be ignored! 2009-Mar-08 22:31:58 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-08 22:31:58 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Mar-08 22:31:58 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Mar-08 22:31:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Mar-08 22:32:00 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-08 22:32:00 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Mar-08 22:32:00 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2009-Mar-08 22:32:00 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Mar-08 22:32:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Mar-08 22:32:00 INFO1 config_iflo: Selecting receiver ALFA 2009-Mar-08 22:32:00 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Mar-08 22:32:00 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Mar-08 22:32:00 START begin_task: Starting task 'selecting receiver ALFA' 2009-Mar-08 22:32:00 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2009-Mar-08 22:32:00 NOTE select_receiver: Starting to select receiver ALFA 2009-Mar-08 22:32:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Mar-08 22:32:00 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2009-Mar-08 22:32:00 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Mar-08 22:32:00 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Mar-08 22:32:00 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Mar-08 22:32:00 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2009-Mar-08 22:32:00 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Mar-08 22:32:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 22:32:01 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Mar-08 22:32:01 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2009-Mar-08 22:32:01 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Mar-08 22:32:01 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Mar-08 22:32:01 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Mar-08 22:32:01 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Mar-08 22:32:01 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Mar-08 22:32:01 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Mar-08 22:32:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-08 22:32:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-08 22:32:01 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-08 22:32:01 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Mar-08 22:32:01 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-08 22:32:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-08 22:32:01 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Mar-08 22:32:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-08 22:32:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-08 22:32:01 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Mar-08 22:32:01 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Mar-08 22:32:01 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Mar-08 22:32:01 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Mar-08 22:32:01 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Mar-08 22:32:01 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Mar-08 22:32:01 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Mar-08 22:32:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2009-Mar-08 22:32:01 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Mar-08 22:32:01 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Mar-08 22:32:01 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Mar-08 22:32:01 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Mar-08 22:32:01 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Mar-08 22:32:01 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Mar-08 22:32:01 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Mar-08 22:32:01 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Mar-08 22:32:01 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Mar-08 22:32:01 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Mar-08 22:32:01 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Mar-08 22:32:01 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Mar-08 22:32:01 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Mar-08 22:32:01 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Mar-08 22:32:01 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Mar-08 22:32:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:32:01 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Mar-08 22:32:01 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Mar-08 22:32:01 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Mar-08 22:32:01 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Mar-08 22:32:01 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Mar-08 22:32:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Mar-08 22:32:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 22:32:01 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Mar-08 22:32:01 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Mar-08 22:32:01 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2009-Mar-08 22:32:01 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Mar-08 22:32:01 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Mar-08 22:32:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Mar-08 22:32:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Mar-08 22:32:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Mar-08 22:32:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Mar-08 22:32:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2009-Mar-08 22:32:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Mar-08 22:32:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Mar-08 22:32:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Mar-08 22:32:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Mar-08 22:32:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Mar-08 22:32:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Mar-08 22:32:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Mar-08 22:32:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Mar-08 22:32:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Mar-08 22:32:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:32:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Mar-08 22:32:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Mar-08 22:32:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Mar-08 22:32:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Mar-08 22:32:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 22:32:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:32:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:32:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:32:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:32:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:32:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:32:10 COMMAND CIMA-send_to_exec: Sending command to abort observation 2009-Mar-08 22:32:10 LOG4 exec_msg: From OBSERVER: abort_task abort 2009-Mar-08 22:32:10 WARNING abort_task: WARNING abort requested! 2009-Mar-08 22:32:10 WARNING abort_task: WARNING Aborting waiting on configuring IF/LO path 2009-Mar-08 22:32:10 START begin_task: Starting task 'stopping the interim correlator' 2009-Mar-08 22:32:10 LOG5 begin_task: Level: (4) ID = <10008> Status = 1 0 0 0 ok 2009-Mar-08 22:32:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the interim correlator ...} 2009-Mar-08 22:32:10 NOTE stop_icorr: Stopping the interim correlator 2009-Mar-08 22:32:12 LOG3 vw_send: To DATATAKING: cor stop 2009-Mar-08 22:32:12 STOP end_task: Finishing task 'stopping the interim correlator' with status 'OK' 2009-Mar-08 22:32:12 LOG5 end_task: Level: (4) ID = <10008> Status = 1 0 0 0 ok 2009-Mar-08 22:32:12 WARNING abort_task: WARNING Aborting wait for waiting on configuring IF/LO path 2009-Mar-08 22:32:12 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'ABORT' 2009-Mar-08 22:32:12 LOG5 end_task: Level: (3) ID = <10007> Status = 1 0 0 0 abort 2009-Mar-08 22:32:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Mar-08 22:32:12 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Mar-08 22:32:12 LOG5 finish_task: Level: (2) ID = <10003> Status = 1 0 0 0 abort 2009-Mar-08 22:32:12 WARNING finish_task: WARNING aborted configuration: IF/LO path 2009-Mar-08 22:32:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2009-Mar-08 22:32:12 END end_task: Finishing task 'configuring IF/LO path' with status 'ABORT' 2009-Mar-08 22:32:12 LOG5 end_task: Level: (2) ID = <10003> Status = 1 0 0 0 abort 2009-Mar-08 22:32:12 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Mar-08 22:32:12 LOG5 begin_task: Level: (2) ID = <10009> Status = 1 0 0 0 abort 2009-Mar-08 22:32:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Mar-08 22:32:12 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Mar-08 22:32:12 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Mar-08 22:32:12 START begin_task: Starting task 'selecting calibration port' 2009-Mar-08 22:32:12 LOG5 begin_task: Level: (3) ID = <10010> Status = 1 0 0 0 abort 2009-Mar-08 22:32:12 LOG3 vw_send: To DATATAKING: calport 3 2009-Mar-08 22:32:12 STOP end_task: Finishing task 'selecting calibration port' with status 'ABORT' 2009-Mar-08 22:32:12 LOG5 end_task: Level: (3) ID = <10010> Status = 1 0 0 0 abort 2009-Mar-08 22:32:12 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-08 22:32:12 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-08 22:32:12 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Mar-08 22:32:12 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Mar-08 22:32:12 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Mar-08 22:32:12 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Mar-08 22:32:12 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Mar-08 22:32:12 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Mar-08 22:32:12 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Mar-08 22:32:12 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Mar-08 22:32:12 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2009-Mar-08 22:32:12 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2009-Mar-08 22:32:12 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2009-Mar-08 22:32:12 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2009-Mar-08 22:32:12 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Mar-08 22:32:12 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Mar-08 22:32:12 ERROR is_configured: ERROR the IF/LO path has not been configured! 2009-Mar-08 22:32:12 LOG1 task_failed: Task 'configuring WAPPs' failed! 2009-Mar-08 22:32:12 LOG5 task_failed: Level: (2) ID = <10009> Status = 1 0 0 0 abort 2009-Mar-08 22:32:12 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Mar-08 22:32:12 LOG5 finish_task: Level: (2) ID = <10009> Status = 1 0 0 1 failed 2009-Mar-08 22:32:12 ERROR finish_task: ERROR failed configuring: the WAPPs in ALFA mode 2009-Mar-08 22:32:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2009-Mar-08 22:32:12 END end_task: Finishing task 'configuring WAPPs' with status 'FAILED' 2009-Mar-08 22:32:12 LOG5 end_task: Level: (2) ID = <10009> Status = 1 0 0 1 failed 2009-Mar-08 22:32:12 ALERT run_command_file: Stopping command file processing at line 3! 2009-Mar-08 22:32:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Mar-08 22:32:12 STOP finish_task: Finishing task 'running command file '090308.cmd'' 2009-Mar-08 22:32:12 LOG5 finish_task: Level: (1) ID = <10002> Status = 1 0 0 1 failed 2009-Mar-08 22:32:12 ERROR finish_task: ERROR failed running: command file '090308.cmd' 2009-Mar-08 22:32:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2009-Mar-08 22:32:13 END end_task: Finishing task 'running command file '090308.cmd'' with status 'FAILED' 2009-Mar-08 22:32:13 LOG5 end_task: Level: (1) ID = <10002> Status = 1 0 0 1 failed 2009-Mar-08 22:32:13 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-08 22:32:13 LOG4 got_cormsg: From DATATAKING: cor stop 2009-Mar-08 22:32:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-08 22:32:13 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Mar-08 22:32:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-08 22:32:13 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-08 22:32:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-08 22:32:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-08 22:32:13 LOG4 got_cormsg: From DATATAKING: signal interrupt caught 2009-Mar-08 22:32:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:32:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Mar-08 22:32:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Mar-08 22:32:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Mar-08 22:32:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:32:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:32:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:32:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:32:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:32:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:32:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:32:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:32:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:32:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:32:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:32:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:32:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:32:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:32:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:32:16 LOG4 got_cormsg: From DATATAKING: mcpStopDataCmd: prg corProg@cor err 0x4170003 2009-Mar-08 22:32:16 ERROR got_cormsg: ERROR correlator configuration error! 2009-Mar-08 22:32:16 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-08 22:32:16 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-08 22:32:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:32:32 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Mar-08 22:32:32 LOG4 exec_msg: From OBSERVER: run_command_file 090308.cmd 4 1 15 2009-Mar-08 22:32:32 LOG4 run_command_file: Calling 'run_command_file 090308.cmd 4 1 15' 2009-Mar-08 22:32:32 BEGIN begin_task: Starting task 'running command file '090308.cmd'' 2009-Mar-08 22:32:32 LOG5 begin_task: Level: (1) ID = <10011> Status = 0 0 0 0 ok 2009-Mar-08 22:32:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '090308.cmd' ...} 2009-Mar-08 22:32:32 NOTE run_command_file: Starting execution of command file '090308.cmd' from line 4 2009-Mar-08 22:32:32 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2009-Mar-08 22:32:32 COMMAND run_command_line: EXECUTING command 5: 'CATALOG AGESFull.cat' 2009-Mar-08 22:32:32 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2009-Mar-08 22:32:32 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGES3193_p2_018) < 094033 THEN' 2009-Mar-08 22:32:33 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_018) < 094033 2009-Mar-08 22:32:33 INFO5 is_if_valid: Condition parsed as: 9.3100529999999999 < 9.6758333333333333 2009-Mar-08 22:32:33 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=210.41 alfaangle=-8.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_018 ra=95300.00 dec=232730.00' 2009-Mar-08 22:32:33 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-Mar-08 22:32:33 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-08 22:32:33 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 210.41 -8.6 hcorcal 5 tracking no first 1 AGES3193_p2_018 95300.00 232730.00 J 8500.0 Heliocentric velocity(optical)' 2009-Mar-08 22:32:33 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Mar-08 22:32:33 LOG5 begin_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2009-Mar-08 22:32:33 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AUDSGAL2577' 2009-Mar-08 22:32:33 ERROR is_configured: ERROR the IF/LO path has not been configured! 2009-Mar-08 22:32:33 LOG1 task_failed: Task 'fixed azimuth drift map' failed! 2009-Mar-08 22:32:33 LOG5 task_failed: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2009-Mar-08 22:32:33 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2009-Mar-08 22:32:33 LOG5 end_task: Level: (2) ID = <10012> Status = 0 0 0 1 failed 2009-Mar-08 22:32:33 ALERT run_command_file: Stopping command file processing at line 9! 2009-Mar-08 22:32:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Mar-08 22:32:33 STOP finish_task: Finishing task 'running command file '090308.cmd'' 2009-Mar-08 22:32:33 LOG5 finish_task: Level: (1) ID = <10011> Status = 0 0 0 1 failed 2009-Mar-08 22:32:33 ERROR finish_task: ERROR failed running: command file '090308.cmd' 2009-Mar-08 22:32:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2009-Mar-08 22:32:33 END end_task: Finishing task 'running command file '090308.cmd'' with status 'FAILED' 2009-Mar-08 22:32:33 LOG5 end_task: Level: (1) ID = <10011> Status = 0 0 0 1 failed 2009-Mar-08 22:32:56 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Mar-08 22:32:56 LOG4 exec_msg: From OBSERVER: run_command_file 090308.cmd 3 1 15 2009-Mar-08 22:32:56 LOG4 run_command_file: Calling 'run_command_file 090308.cmd 3 1 15' 2009-Mar-08 22:32:56 BEGIN begin_task: Starting task 'running command file '090308.cmd'' 2009-Mar-08 22:32:56 LOG5 begin_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2009-Mar-08 22:32:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '090308.cmd' ...} 2009-Mar-08 22:32:56 NOTE run_command_file: Starting execution of command file '090308.cmd' from line 3 2009-Mar-08 22:32:56 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2009-Mar-08 22:32:56 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Mar-08 22:32:56 NOTE CIMA-check_config_file: File 'ages_config.conf' contains an ALFA set-up which will be ignored! 2009-Mar-08 22:32:56 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-08 22:32:56 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Mar-08 22:32:56 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2009-Mar-08 22:32:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Mar-08 22:32:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Mar-08 22:32:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Mar-08 22:32:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Mar-08 22:32:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Mar-08 22:32:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Mar-08 22:32:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Mar-08 22:32:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2009-Mar-08 22:32:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Mar-08 22:32:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Mar-08 22:32:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Mar-08 22:32:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-08 22:32:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-08 22:32:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-08 22:32:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-08 22:32:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Mar-08 22:32:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Mar-08 22:32:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Mar-08 22:32:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Mar-08 22:32:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Mar-08 22:32:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Mar-08 22:32:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Mar-08 22:32:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Mar-08 22:32:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-08 22:32:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-08 22:32:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-08 22:32:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-08 22:32:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Mar-08 22:32:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Mar-08 22:32:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Mar-08 22:32:59 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-08 22:32:59 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Mar-08 22:32:59 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Mar-08 22:32:59 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Mar-08 22:32:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Mar-08 22:32:59 INFO1 config_iflo: Selecting receiver ALFA 2009-Mar-08 22:32:59 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Mar-08 22:32:59 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Mar-08 22:32:59 START begin_task: Starting task 'selecting receiver ALFA' 2009-Mar-08 22:32:59 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Mar-08 22:32:59 NOTE select_receiver: Starting to select receiver ALFA 2009-Mar-08 22:32:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Mar-08 22:32:59 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2009-Mar-08 22:32:59 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Mar-08 22:32:59 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Mar-08 22:32:59 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Mar-08 22:32:59 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Mar-08 22:32:59 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Mar-08 22:32:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 22:32:59 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Mar-08 22:32:59 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Mar-08 22:32:59 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Mar-08 22:32:59 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2009-Mar-08 22:32:59 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Mar-08 22:32:59 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2009-Mar-08 22:32:59 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Mar-08 22:32:59 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Mar-08 22:32:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-08 22:33:00 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-08 22:33:00 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-08 22:33:00 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Mar-08 22:33:00 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2009-Mar-08 22:33:00 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Mar-08 22:33:00 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-08 22:33:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-08 22:33:00 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Mar-08 22:33:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-08 22:33:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-08 22:33:01 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Mar-08 22:33:01 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Mar-08 22:33:01 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Mar-08 22:33:01 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Mar-08 22:33:01 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Mar-08 22:33:01 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Mar-08 22:33:01 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Mar-08 22:33:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2009-Mar-08 22:33:01 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Mar-08 22:33:01 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Mar-08 22:33:01 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Mar-08 22:33:01 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Mar-08 22:33:01 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Mar-08 22:33:01 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Mar-08 22:33:01 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Mar-08 22:33:01 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Mar-08 22:33:01 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Mar-08 22:33:01 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Mar-08 22:33:01 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Mar-08 22:33:01 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Mar-08 22:33:01 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Mar-08 22:33:01 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Mar-08 22:33:01 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Mar-08 22:33:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:33:01 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Mar-08 22:33:01 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Mar-08 22:33:01 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Mar-08 22:33:01 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Mar-08 22:33:01 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Mar-08 22:33:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Mar-08 22:33:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 22:33:01 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Mar-08 22:33:01 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2009-Mar-08 22:33:01 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Mar-08 22:33:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Mar-08 22:33:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Mar-08 22:33:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Mar-08 22:33:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Mar-08 22:33:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2009-Mar-08 22:33:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Mar-08 22:33:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Mar-08 22:33:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Mar-08 22:33:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Mar-08 22:33:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Mar-08 22:33:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Mar-08 22:33:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Mar-08 22:33:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Mar-08 22:33:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Mar-08 22:33:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:33:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Mar-08 22:33:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Mar-08 22:33:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Mar-08 22:33:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Mar-08 22:33:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 22:33:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:15 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-08 22:33:15 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Mar-08 22:33:15 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2009-Mar-08 22:33:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Mar-08 22:33:15 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Mar-08 22:33:15 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Mar-08 22:33:15 DONE finish_task: DONE finished configuration: IF/LO path 2009-Mar-08 22:33:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-08 22:33:15 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Mar-08 22:33:15 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Mar-08 22:33:15 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Mar-08 22:33:15 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2009-Mar-08 22:33:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Mar-08 22:33:15 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Mar-08 22:33:15 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Mar-08 22:33:15 START begin_task: Starting task 'selecting calibration port' 2009-Mar-08 22:33:15 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Mar-08 22:33:15 LOG3 vw_send: To DATATAKING: calport 3 2009-Mar-08 22:33:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Mar-08 22:33:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 22:33:15 START begin_task: Starting task 'waiting on calport' 2009-Mar-08 22:33:15 LOG5 begin_task: Level: (4) ID = <10021> Status = 0 0 0 0 ok 2009-Mar-08 22:33:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:16 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Mar-08 22:33:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 22:33:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:16 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-08 22:33:16 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Mar-08 22:33:16 LOG5 end_task: Level: (4) ID = <10021> Status = 0 0 0 0 ok 2009-Mar-08 22:33:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Mar-08 22:33:16 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Mar-08 22:33:16 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Mar-08 22:33:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-08 22:33:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-08 22:33:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-08 22:33:16 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Mar-08 22:33:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:16 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-08 22:33:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-08 22:33:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-08 22:33:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-08 22:33:16 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Mar-08 22:33:16 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Mar-08 22:33:16 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Mar-08 22:33:16 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Mar-08 22:33:16 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Mar-08 22:33:16 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Mar-08 22:33:16 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Mar-08 22:33:16 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Mar-08 22:33:16 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Mar-08 22:33:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2009-Mar-08 22:33:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2009-Mar-08 22:33:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2009-Mar-08 22:33:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2009-Mar-08 22:33:16 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Mar-08 22:33:16 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Mar-08 22:33:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-08 22:33:16 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2009-Mar-08 22:33:16 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-08 22:33:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-08 22:33:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-08 22:33:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-08 22:33:16 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2009-Mar-08 22:33:16 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Mar-08 22:33:16 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Mar-08 22:33:16 LOG5 finish_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2009-Mar-08 22:33:16 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Mar-08 22:33:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-08 22:33:16 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Mar-08 22:33:16 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2009-Mar-08 22:33:16 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2009-Mar-08 22:33:16 COMMAND run_command_line: EXECUTING command 5: 'CATALOG AGESFull.cat' 2009-Mar-08 22:33:17 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2009-Mar-08 22:33:17 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGES3193_p2_018) < 094033 THEN' 2009-Mar-08 22:33:17 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_018) < 094033 2009-Mar-08 22:33:17 INFO5 is_if_valid: Condition parsed as: 9.3223079999999996 < 9.6758333333333333 2009-Mar-08 22:33:17 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=210.41 alfaangle=-8.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_018 ra=95300.00 dec=232730.00' 2009-Mar-08 22:33:17 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-Mar-08 22:33:17 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Mar-08 22:33:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Mar-08 22:33:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Mar-08 22:33:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Mar-08 22:33:17 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-08 22:33:17 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 210.41 -8.6 hcorcal 5 tracking no first 1 AGES3193_p2_018 95300.00 232730.00 J 8500.0 Heliocentric velocity(optical)' 2009-Mar-08 22:33:17 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Mar-08 22:33:17 LOG5 begin_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2009-Mar-08 22:33:17 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AUDSGAL2577' 2009-Mar-08 22:33:17 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Mar-08 22:33:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_018} 2009-Mar-08 22:33:17 INFO3 fixed_driftmap: Sending telescope to Az = 210.41 and ZA = 5.90 2009-Mar-08 22:33:17 LOG3 track_source: Calling 'track_source AGES3193_p2_018 210.41 5.8999237798 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Mar-08 22:33:17 START begin_task: Starting task 'sending tracking commands' 2009-Mar-08 22:33:17 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2009-Mar-08 22:33:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_018} INFO {Slewing to source 'AGES3193_p2_018' ...} 2009-Mar-08 22:33:17 INFO1 track_source: Starting to track AGES3193_p2_018 2009-Mar-08 22:33:17 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_018" 2009-Mar-08 22:33:17 LOG3 vw_send: To DATATAKING: set ra 210.41 2009-Mar-08 22:33:17 LOG3 vw_send: To DATATAKING: set dec 5.8999237798 2009-Mar-08 22:33:17 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-08 22:33:17 LOG3 vw_send: To DATATAKING: pnt tr 210.41 5.8999237798 -CF 2009-Mar-08 22:33:17 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Mar-08 22:33:17 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-08 22:33:17 LOG5 finish_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2009-Mar-08 22:33:17 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-08 22:33:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 22:33:17 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-08 22:33:17 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2009-Mar-08 22:33:17 START begin_task: Starting task 'rotate ALFA to -8.6 degrees' 2009-Mar-08 22:33:17 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Mar-08 22:33:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -8.6 degrees ...} 2009-Mar-08 22:33:17 INFO2 rotate_alfa: ALFA commanded to -8.6 degrees 2009-Mar-08 22:33:17 LOG3 sock_errsend: To ALFAMOTOR: POSITION -8.6 REPLY 2009-Mar-08 22:33:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Mar-08 22:33:17 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Mar-08 22:33:17 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2009-Mar-08 22:33:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_018" 2009-Mar-08 22:33:17 LOG4 got_cormsg: From DATATAKING: set ra 210.41 2009-Mar-08 22:33:17 LOG4 got_cormsg: From DATATAKING: set dec 5.8999237798 2009-Mar-08 22:33:17 LOG4 got_cormsg: From DATATAKING: vw% 210.41 2009-Mar-08 22:33:17 LOG4 got_cormsg: From DATATAKING: vw% 5.8999237798 2009-Mar-08 22:33:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:33:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-08 22:33:17 LOG4 got_cormsg: From DATATAKING: pnt tr 210.41 5.8999237798 -CF 2009-Mar-08 22:33:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Mar-08 22:33:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-08 22:33:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:34:13 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Mar-08 22:34:13 INFO3 alfa_motor: ALFA rotator in-position -8.60 degrees 2009-Mar-08 22:34:13 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Mar-08 22:34:13 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2009-Mar-08 22:34:13 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-08 22:34:13 STOP finish_task: Finishing task 'rotate ALFA to -8.6 degrees' 2009-Mar-08 22:34:13 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Mar-08 22:34:13 INFO2 finish_task: DONE finished configuration: rotating ALFA to -8.6 degrees 2009-Mar-08 22:34:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 22:34:13 STOP end_task: Finishing task 'rotate ALFA to -8.6 degrees' with status 'OK' 2009-Mar-08 22:34:13 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Mar-08 22:34:13 START begin_task: Starting task 'waiting on telescope' 2009-Mar-08 22:34:13 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2009-Mar-08 22:34:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Mar-08 22:34:13 LOG3 waittrk: Start waittrk 5 2009-Mar-08 22:34:13 START begin_task: Starting task 'waiting on telescope movement' 2009-Mar-08 22:34:13 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Mar-08 22:34:18 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Mar-08 22:34:18 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Mar-08 22:34:18 START begin_task: Starting task 'waiting on telescope on source' 2009-Mar-08 22:34:18 LOG5 begin_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2009-Mar-08 22:37:22 COMMAND CIMA-send_to_exec: Sending command to abort observation 2009-Mar-08 22:37:22 LOG4 exec_msg: From OBSERVER: abort_task abort 2009-Mar-08 22:37:22 WARNING abort_task: WARNING abort requested! 2009-Mar-08 22:37:22 WARNING abort_task: WARNING Aborting wait for waiting on telescope on source 2009-Mar-08 22:37:22 STOP end_task: Finishing task 'waiting on telescope on source' with status 'ABORT' 2009-Mar-08 22:37:22 LOG5 end_task: Level: (4) ID = <10030> Status = 1 0 0 0 abort 2009-Mar-08 22:37:22 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-08 22:37:22 LOG4 waittrk: Current telescope position: Az = 209.92 ZA = 5.92 2009-Mar-08 22:37:22 STOP finish_task: Finishing task 'waiting on telescope' 2009-Mar-08 22:37:22 LOG5 finish_task: Level: (3) ID = <10028> Status = 1 0 0 0 abort 2009-Mar-08 22:37:22 WARNING finish_task: WARNING aborted waiting: telescope on source 2009-Mar-08 22:37:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Aborted 2009-Mar-08 22:37:22 STOP end_task: Finishing task 'waiting on telescope' with status 'ABORT' 2009-Mar-08 22:37:22 LOG5 end_task: Level: (3) ID = <10028> Status = 1 0 0 0 abort 2009-Mar-08 22:37:22 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Mar-08 22:37:22 LOG5 finish_task: Level: (2) ID = <10024> Status = 1 0 0 0 abort 2009-Mar-08 22:37:22 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2009-Mar-08 22:37:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2009-Mar-08 22:37:22 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2009-Mar-08 22:37:22 LOG5 end_task: Level: (2) ID = <10024> Status = 1 0 0 0 abort 2009-Mar-08 22:37:22 ALERT run_command_file: Stopping command file processing at line 9! 2009-Mar-08 22:37:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Mar-08 22:37:23 STOP finish_task: Finishing task 'running command file '090308.cmd'' 2009-Mar-08 22:37:23 LOG5 finish_task: Level: (1) ID = <10013> Status = 1 0 0 0 abort 2009-Mar-08 22:37:23 WARNING finish_task: WARNING aborted running: command file '090308.cmd' 2009-Mar-08 22:37:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2009-Mar-08 22:37:23 END end_task: Finishing task 'running command file '090308.cmd'' with status 'ABORT' 2009-Mar-08 22:37:23 LOG5 end_task: Level: (1) ID = <10013> Status = 1 0 0 0 abort 2009-Mar-08 22:37:41 INFO1 CIMA-run_command_file: Transferring command file 'command_galfacurpos.cmd ' to executive ... 2009-Mar-08 22:37:41 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 7 {LOAD togs_ages.conf} 2009-Mar-08 22:37:41 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 8 {TRACKCURPOS} 2009-Mar-08 22:37:41 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 9 {ALFAANGLE 19} 2009-Mar-08 22:37:41 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2009-Mar-08 22:37:41 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Mar-08 22:37:41 LOG4 exec_msg: From OBSERVER: run_command_file command_galfacurpos.cmd 1 1 4 2009-Mar-08 22:37:41 LOG4 run_command_file: Calling 'run_command_file command_galfacurpos.cmd 1 1 4' 2009-Mar-08 22:37:41 BEGIN begin_task: Starting task 'running command file 'command_galfacurpos.cmd'' 2009-Mar-08 22:37:41 LOG5 begin_task: Level: (1) ID = <10031> Status = 0 0 0 0 ok 2009-Mar-08 22:37:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfacurpos.cmd' ...} 2009-Mar-08 22:37:41 NOTE run_command_file: Starting execution of command file 'command_galfacurpos.cmd' from line 1 2009-Mar-08 22:37:41 COMMAND run_command_line: EXECUTING command 7: 'LOAD togs_ages.conf' 2009-Mar-08 22:37:41 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Mar-08 22:37:41 NOTE CIMA-check_config_file: File 'togs_ages.conf' contains a observing mode set-up which will be ignored! 2009-Mar-08 22:37:41 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-08 22:37:41 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Mar-08 22:37:41 NOTE CIMA-load_config_file: Loading configuration file 'togs_ages.conf' 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Mar-08 22:37:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Mar-08 22:37:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Mar-08 22:37:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Mar-08 22:37:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Mar-08 22:37:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Mar-08 22:37:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-08 22:37:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-08 22:37:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-08 22:37:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-08 22:37:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Mar-08 22:37:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Mar-08 22:37:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Mar-08 22:37:44 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-08 22:37:44 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Mar-08 22:37:44 LOG5 begin_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2009-Mar-08 22:37:44 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Mar-08 22:37:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Mar-08 22:37:44 LOG1 config_iflo: Receiver ALFA already selected 2009-Mar-08 22:37:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-08 22:37:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-08 22:37:44 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-08 22:37:44 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Mar-08 22:37:44 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-08 22:37:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-08 22:37:44 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Mar-08 22:37:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-08 22:37:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-08 22:37:44 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Mar-08 22:37:44 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Mar-08 22:37:44 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Mar-08 22:37:44 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Mar-08 22:37:44 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Mar-08 22:37:44 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Mar-08 22:37:44 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Mar-08 22:37:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2009-Mar-08 22:37:44 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Mar-08 22:37:44 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Mar-08 22:37:44 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Mar-08 22:37:44 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Mar-08 22:37:44 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Mar-08 22:37:44 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Mar-08 22:37:44 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Mar-08 22:37:44 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Mar-08 22:37:44 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Mar-08 22:37:44 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Mar-08 22:37:44 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Mar-08 22:37:44 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2009-Mar-08 22:37:44 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Mar-08 22:37:44 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Mar-08 22:37:44 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Mar-08 22:37:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:37:44 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Mar-08 22:37:44 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Mar-08 22:37:44 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Mar-08 22:37:44 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Mar-08 22:37:44 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Mar-08 22:37:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Mar-08 22:37:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 22:37:44 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Mar-08 22:37:44 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2009-Mar-08 22:37:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2009-Mar-08 22:37:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:37:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 22:37:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:37:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:37:45 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-08 22:37:45 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Mar-08 22:37:45 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2009-Mar-08 22:37:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Mar-08 22:37:45 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Mar-08 22:37:45 LOG5 finish_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2009-Mar-08 22:37:45 DONE finish_task: DONE finished configuration: IF/LO path 2009-Mar-08 22:37:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-08 22:37:45 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Mar-08 22:37:45 LOG5 end_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2009-Mar-08 22:37:45 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Mar-08 22:37:45 LOG5 begin_task: Level: (2) ID = <10035> Status = 0 0 0 0 ok 2009-Mar-08 22:37:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Mar-08 22:37:45 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Mar-08 22:37:45 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Mar-08 22:37:45 START begin_task: Starting task 'selecting calibration port' 2009-Mar-08 22:37:45 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2009-Mar-08 22:37:45 LOG3 vw_send: To DATATAKING: calport 3 2009-Mar-08 22:37:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Mar-08 22:37:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 22:37:45 START begin_task: Starting task 'waiting on calport' 2009-Mar-08 22:37:45 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2009-Mar-08 22:37:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:37:45 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Mar-08 22:37:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 22:37:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:37:45 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-08 22:37:45 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Mar-08 22:37:45 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2009-Mar-08 22:37:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Mar-08 22:37:45 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Mar-08 22:37:45 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2009-Mar-08 22:37:45 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-08 22:37:45 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-08 22:37:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-08 22:37:45 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2009-Mar-08 22:37:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:37:45 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-08 22:37:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-08 22:37:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-08 22:37:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-08 22:37:45 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2009-Mar-08 22:37:45 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Mar-08 22:37:45 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Mar-08 22:37:45 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Mar-08 22:37:45 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Mar-08 22:37:46 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Mar-08 22:37:46 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Mar-08 22:37:46 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Mar-08 22:37:46 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Mar-08 22:37:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2009-Mar-08 22:37:46 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2009-Mar-08 22:37:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2009-Mar-08 22:37:46 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2009-Mar-08 22:37:46 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Mar-08 22:37:46 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Mar-08 22:37:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-08 22:37:46 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Mar-08 22:37:46 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-08 22:37:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-08 22:37:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-08 22:37:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-08 22:37:46 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Mar-08 22:37:46 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Mar-08 22:37:46 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Mar-08 22:37:46 LOG5 finish_task: Level: (2) ID = <10035> Status = 0 0 0 0 ok 2009-Mar-08 22:37:46 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Mar-08 22:37:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-08 22:37:46 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Mar-08 22:37:46 LOG5 end_task: Level: (2) ID = <10035> Status = 0 0 0 0 ok 2009-Mar-08 22:37:46 COMMAND run_command_line: EXECUTING command 8: 'TRACKCURPOS' 2009-Mar-08 22:37:46 BEGIN begin_task: Starting task 'tracking current position' 2009-Mar-08 22:37:46 LOG5 begin_task: Level: (2) ID = <10040> Status = 0 0 0 0 ok 2009-Mar-08 22:37:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2009-Mar-08 22:37:46 INFO1 track_current_pos: Starting to track the current commanded position RA = 09:30:53.2 and Dec = +23:27:18.8 2009-Mar-08 22:37:46 LOG3 track_source: Calling 'track_source Cur-pos 093053.2 232718.8 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Mar-08 22:37:46 START begin_task: Starting task 'sending tracking commands' 2009-Mar-08 22:37:46 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Mar-08 22:37:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2009-Mar-08 22:37:46 INFO1 track_source: Starting to track Cur-pos 2009-Mar-08 22:37:46 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2009-Mar-08 22:37:46 LOG3 vw_send: To DATATAKING: set ra 093053.2 2009-Mar-08 22:37:46 LOG3 vw_send: To DATATAKING: set dec 232718.8 2009-Mar-08 22:37:46 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-08 22:37:46 LOG3 vw_send: To DATATAKING: pnt tr 093053.2 232718.8 -CJ 2009-Mar-08 22:37:46 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Mar-08 22:37:46 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-08 22:37:46 LOG5 finish_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Mar-08 22:37:46 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-08 22:37:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 22:37:46 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-08 22:37:46 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Mar-08 22:37:46 START begin_task: Starting task 'waiting on telescope' 2009-Mar-08 22:37:46 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2009-Mar-08 22:37:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Mar-08 22:37:46 LOG3 waittrk: Start waittrk 5 2009-Mar-08 22:37:46 START begin_task: Starting task 'waiting on telescope movement' 2009-Mar-08 22:37:46 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2009-Mar-08 22:37:46 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Mar-08 22:37:46 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2009-Mar-08 22:37:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Mar-08 22:37:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Mar-08 22:37:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Mar-08 22:37:46 LOG4 got_cormsg: From DATATAKING: set ra 093053.2 2009-Mar-08 22:37:46 LOG4 got_cormsg: From DATATAKING: set dec 232718.8 2009-Mar-08 22:37:46 LOG4 got_cormsg: From DATATAKING: vw% 093053.2 2009-Mar-08 22:37:46 LOG4 got_cormsg: From DATATAKING: vw% 232718.8 2009-Mar-08 22:37:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:37:46 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-08 22:37:46 LOG4 got_cormsg: From DATATAKING: pnt tr 093053.2 232718.8 -CJ 2009-Mar-08 22:37:46 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Mar-08 22:37:46 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-08 22:37:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:37:51 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Mar-08 22:37:51 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2009-Mar-08 22:37:51 START begin_task: Starting task 'waiting on telescope on source' 2009-Mar-08 22:37:51 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Mar-08 22:37:57 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Mar-08 22:37:57 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Mar-08 22:37:57 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-08 22:37:57 INFO2 waittrk: Now tracking Cur-pos 2009-Mar-08 22:37:57 LOG4 waittrk: Current telescope position: Az = 209.67 ZA = 5.90 2009-Mar-08 22:37:57 STOP finish_task: Finishing task 'waiting on telescope' 2009-Mar-08 22:37:57 LOG5 finish_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2009-Mar-08 22:37:57 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Mar-08 22:37:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 22:37:57 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Mar-08 22:37:57 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2009-Mar-08 22:37:57 STOP finish_task: Finishing task 'tracking current position' 2009-Mar-08 22:37:57 LOG5 finish_task: Level: (2) ID = <10040> Status = 0 0 0 0 ok 2009-Mar-08 22:37:57 DONE finish_task: DONE finished tracking: current position 2009-Mar-08 22:37:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-08 22:37:57 END end_task: Finishing task 'tracking current position' with status 'OK' 2009-Mar-08 22:37:57 LOG5 end_task: Level: (2) ID = <10040> Status = 0 0 0 0 ok 2009-Mar-08 22:37:57 COMMAND run_command_line: EXECUTING command 9: 'ALFAANGLE 19' 2009-Mar-08 22:37:57 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Mar-08 22:37:57 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Mar-08 22:37:57 LOG5 begin_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2009-Mar-08 22:37:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Mar-08 22:37:57 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Mar-08 22:37:57 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Mar-08 22:37:57 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Mar-08 22:37:57 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Mar-08 22:37:57 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Mar-08 22:38:14 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Mar-08 22:38:14 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Mar-08 22:38:14 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Mar-08 22:38:14 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Mar-08 22:38:14 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-08 22:38:14 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Mar-08 22:38:14 LOG5 finish_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2009-Mar-08 22:38:14 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Mar-08 22:38:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-08 22:38:14 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Mar-08 22:38:14 LOG5 end_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2009-Mar-08 22:38:14 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2009-Mar-08 22:38:14 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Mar-08 22:38:14 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-08 22:38:14 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2009-Mar-08 22:38:14 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Mar-08 22:38:14 LOG5 begin_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2009-Mar-08 22:38:14 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2009-Mar-08 22:38:14 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Mar-08 22:38:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Mar-08 22:38:14 START begin_task: Starting task 'selecting calibration type' 2009-Mar-08 22:38:14 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Mar-08 22:38:14 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-08 22:38:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-08 22:38:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 22:38:14 START begin_task: Starting task 'waiting on setcal' 2009-Mar-08 22:38:14 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Mar-08 22:38:14 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-08 22:38:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 22:38:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:38:15 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-08 22:38:15 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-08 22:38:15 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Mar-08 22:38:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-08 22:38:15 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-08 22:38:15 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-08 22:38:15 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-08 22:38:15 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2009-Mar-08 22:38:15 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-08 22:38:15 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-08 22:38:15 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2009-Mar-08 22:38:15 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-08 22:38:15 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-08 22:38:15 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-08 22:38:15 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-08 22:38:15 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-08 22:38:15 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Mar-08 22:38:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:38:15 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-08 22:38:15 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-08 22:38:15 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Mar-08 22:38:15 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-08 22:38:15 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-08 22:38:15 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-08 22:38:15 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Mar-08 22:38:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2009-Mar-08 22:38:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2009-Mar-08 22:38:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2009-Mar-08 22:38:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2009-Mar-08 22:38:15 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Mar-08 22:38:15 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Mar-08 22:38:15 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Mar-08 22:38:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-08 22:38:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-08 22:38:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-08 22:38:15 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Mar-08 22:38:15 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-08 22:38:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-08 22:38:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-08 22:38:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-08 22:38:15 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Mar-08 22:38:15 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Mar-08 22:38:15 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-08 22:38:15 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2009-Mar-08 22:38:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Mar-08 22:38:15 INFO2 adjust_power: Starting to adjust WAPP power 2009-Mar-08 22:38:15 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Mar-08 22:38:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Mar-08 22:38:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 22:38:15 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Mar-08 22:38:15 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2009-Mar-08 22:38:15 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Mar-08 22:38:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 22:38:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Mar-08 22:38:16 NOTE WAPPDATA-new_file: New FITS file: wapp.20090308.a2048.0000.fits 2009-Mar-08 22:38:16 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090308.a2048.0000.fits} 2009-Mar-08 22:38:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:38:18 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-08 22:38:18 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Mar-08 22:38:18 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2009-Mar-08 22:38:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Mar-08 22:38:19 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-08 22:38:19 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Mar-08 22:38:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Mar-08 22:38:19 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-08 22:38:19 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-08 22:38:19 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-08 22:38:19 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-08 22:38:19 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Mar-08 22:38:19 LOG5 begin_task: Level: (5) ID = <10056> Status = 0 0 0 0 ok 2009-Mar-08 22:38:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Mar-08 22:38:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:38:19 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Mar-08 22:38:19 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 3 dB 2009-Mar-08 22:38:19 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 2 dB 2009-Mar-08 22:38:19 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Mar-08 22:38:19 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Mar-08 22:38:19 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Mar-08 22:38:19 LOG5 end_task: Level: (5) ID = <10056> Status = 0 0 0 0 ok 2009-Mar-08 22:38:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.014 0.933 ALFA beam 1: 1.101 1.091 2009-Mar-08 22:38:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.048 0.998 ALFA beam 3: 0.891 1.113 2009-Mar-08 22:38:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.911 0.980 ALFA beam 5: 1.085 1.060 2009-Mar-08 22:38:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.949 0.110 ALFA beam 7: 1.046 0.120 2009-Mar-08 22:38:19 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-08 22:38:19 LOG5 finish_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Mar-08 22:38:19 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Mar-08 22:38:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 22:38:19 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-08 22:38:19 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Mar-08 22:38:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Mar-08 22:38:19 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-08 22:38:19 LOG5 finish_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2009-Mar-08 22:38:19 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Mar-08 22:38:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 22:38:19 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-08 22:38:19 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2009-Mar-08 22:38:19 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2009-Mar-08 22:38:19 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2009-Mar-08 22:38:19 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-Mar-08 22:38:19 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:38:19 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18602 J 2009-Mar-08 22:38:19 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:38:19 LOG2 antvel: Parameters to Doppler: Topocentric 95899 2009 67 0.0 2009-Mar-08 22:38:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:38:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-Mar-08 22:38:19 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-Mar-08 22:38:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:38:19 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:38:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Mar-08 22:38:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:38:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Mar-08 22:38:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:38:19 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2009-Mar-08 22:38:19 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.316706 2009.1860185502067 18.999933 2009-Mar-08 22:38:19 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777766 23.455222222222222 2009-Mar-08 22:38:19 LOG4 log_alfabeam: ALFABEAM 1 9.512010190851829 23.356171132685535 2009-Mar-08 22:38:19 LOG4 log_alfabeam: ALFABEAM 2 9.518866020617205 23.381300848069564 2009-Mar-08 22:38:19 LOG4 log_alfabeam: ALFABEAM 3 9.521710948397136 23.479975544797817 2009-Mar-08 22:38:19 LOG4 log_alfabeam: ALFABEAM 4 9.517508435276943 23.554532857921270 2009-Mar-08 22:38:19 LOG4 log_alfabeam: ALFABEAM 5 9.510573720565393 23.528535311194439 2009-Mar-08 22:38:19 LOG4 log_alfabeam: ALFABEAM 6 9.507920918028322 23.428865457358008 2009-Mar-08 22:38:19 INFO2 take_data: Starting WAPP+GALFA scan: 906700150 2009-Mar-08 22:38:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:38:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:38:20 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2009-Mar-08 22:38:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:38:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Mar-08 22:38:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:38:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:38:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:38:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9501.00 2009-Mar-08 22:38:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:38:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:38:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:38:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:38:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:38:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:38:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:38:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:38:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:38:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.113 < 0.75)! 2009-Mar-08 22:38:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 0.977 1.157 1.124 2009-Mar-08 22:38:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 1.036 0.959 1.161 2009-Mar-08 22:38:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.965 1.021 1.167 1.105 2009-Mar-08 22:38:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.983 0.113 1.079 0.123 2009-Mar-08 22:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.163 (still bad) 2009-Mar-08 22:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.166 (still bad) 2009-Mar-08 22:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.167 (still bad) 2009-Mar-08 22:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.163 (still bad) 2009-Mar-08 22:38:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:38:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:38:31 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2009-Mar-08 22:38:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:38:31 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2009-Mar-08 22:38:31 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2009-Mar-08 22:38:31 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2009-Mar-08 22:38:31 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2009-Mar-08 22:38:31 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:38:31 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18602 J 2009-Mar-08 22:38:31 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:38:31 LOG2 antvel: Parameters to Doppler: Topocentric 95911 2009 67 0.0 2009-Mar-08 22:38:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:38:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2009-Mar-08 22:38:31 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2009-Mar-08 22:38:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:38:31 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:38:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Mar-08 22:38:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:38:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Mar-08 22:38:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:38:31 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2009-Mar-08 22:38:31 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.320048 2009.1860189304637 18.999933 2009-Mar-08 22:38:31 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777777 23.455222222222226 2009-Mar-08 22:38:31 LOG4 log_alfabeam: ALFABEAM 1 9.512061670917095 23.355901588224143 2009-Mar-08 22:38:31 LOG4 log_alfabeam: ALFABEAM 2 9.518904132876054 23.381704296761580 2009-Mar-08 22:38:31 LOG4 log_alfabeam: ALFABEAM 3 9.521698056038653 23.480654762785036 2009-Mar-08 22:38:31 LOG4 log_alfabeam: ALFABEAM 4 9.517456583862957 23.554799821766885 2009-Mar-08 22:38:31 LOG4 log_alfabeam: ALFABEAM 5 9.510535453874644 23.528118085877050 2009-Mar-08 22:38:31 LOG4 log_alfabeam: ALFABEAM 6 9.507934970941394 23.428187676026898 2009-Mar-08 22:38:31 INFO2 take_data: Starting WAPP+GALFA scan: 906700151 2009-Mar-08 22:38:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:38:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:38:32 LOG5 begin_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2009-Mar-08 22:38:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:38:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Mar-08 22:38:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:38:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:38:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:38:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9513.00 2009-Mar-08 22:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.163 (still bad) 2009-Mar-08 22:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.132 (still bad) 2009-Mar-08 22:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.133 (still bad) 2009-Mar-08 22:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.131 (still bad) 2009-Mar-08 22:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.132 (still bad) 2009-Mar-08 22:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.132 (still bad) 2009-Mar-08 22:38:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:38:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:38:43 LOG5 end_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2009-Mar-08 22:38:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:38:43 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2009-Mar-08 22:38:43 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2009-Mar-08 22:38:43 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2009-Mar-08 22:38:43 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2009-Mar-08 22:38:43 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:38:43 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18602 J 2009-Mar-08 22:38:43 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:38:43 LOG2 antvel: Parameters to Doppler: Topocentric 95923 2009 67 0.0 2009-Mar-08 22:38:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:38:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2009-Mar-08 22:38:43 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2009-Mar-08 22:38:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:38:43 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:38:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Mar-08 22:38:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:38:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Mar-08 22:38:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:38:43 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Mar-08 22:38:43 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.323390 2009.1860193107207 18.999933 2009-Mar-08 22:38:43 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777772 23.455222222222222 2009-Mar-08 22:38:43 LOG4 log_alfabeam: ALFABEAM 1 9.512113691462993 23.355635074240706 2009-Mar-08 22:38:43 LOG4 log_alfabeam: ALFABEAM 2 9.518942331307835 23.382114656644106 2009-Mar-08 22:38:43 LOG4 log_alfabeam: ALFABEAM 3 9.521684706075998 23.481338002309503 2009-Mar-08 22:38:43 LOG4 log_alfabeam: ALFABEAM 4 9.517404191308358 23.555063668692330 2009-Mar-08 22:38:43 LOG4 log_alfabeam: ALFABEAM 5 9.510497114519957 23.527693813173020 2009-Mar-08 22:38:43 LOG4 log_alfabeam: ALFABEAM 6 9.507949488749439 23.427506104954325 2009-Mar-08 22:38:43 INFO2 take_data: Starting WAPP+GALFA scan: 906700152 2009-Mar-08 22:38:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:38:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:38:44 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Mar-08 22:38:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:38:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Mar-08 22:38:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:38:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:38:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:38:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9525.00 2009-Mar-08 22:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.132 (still bad) 2009-Mar-08 22:38:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:38:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:38:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:38:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:38:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:38:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:38:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:38:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:38:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.129 (still bad) 2009-Mar-08 22:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.130 (still bad) 2009-Mar-08 22:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.127 (still bad) 2009-Mar-08 22:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.128 (still bad) 2009-Mar-08 22:38:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:38:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:38:55 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Mar-08 22:38:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:38:55 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Mar-08 22:38:55 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2009-Mar-08 22:38:55 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2009-Mar-08 22:38:55 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2009-Mar-08 22:38:55 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:38:55 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18602 J 2009-Mar-08 22:38:55 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:38:55 LOG2 antvel: Parameters to Doppler: Topocentric 95935 2009 67 0.0 2009-Mar-08 22:38:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:38:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2009-Mar-08 22:38:55 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2009-Mar-08 22:38:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:38:55 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:38:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Mar-08 22:38:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:38:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Mar-08 22:38:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:38:55 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Mar-08 22:38:55 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.326733 2009.1860196909777 18.999933 2009-Mar-08 22:38:55 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777780 23.455222222222215 2009-Mar-08 22:38:55 LOG4 log_alfabeam: ALFABEAM 1 9.512166268533099 23.355371647054355 2009-Mar-08 22:38:55 LOG4 log_alfabeam: ALFABEAM 2 9.518980620284017 23.382532118176975 2009-Mar-08 22:38:55 LOG4 log_alfabeam: ALFABEAM 3 9.521670886711606 23.482025400324343 2009-Mar-08 22:38:55 LOG4 log_alfabeam: ALFABEAM 4 9.517351241590385 23.555324340539173 2009-Mar-08 22:38:55 LOG4 log_alfabeam: ALFABEAM 5 9.510458698471258 23.527262300667925 2009-Mar-08 22:38:55 LOG4 log_alfabeam: ALFABEAM 6 9.507964483313803 23.426820612650978 2009-Mar-08 22:38:55 INFO2 take_data: Starting WAPP+GALFA scan: 906700153 2009-Mar-08 22:38:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:38:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:38:56 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Mar-08 22:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.129 (still bad) 2009-Mar-08 22:38:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:38:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Mar-08 22:38:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:38:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:38:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:38:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9537.00 2009-Mar-08 22:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.129 (still bad) 2009-Mar-08 22:38:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.127 (still bad) 2009-Mar-08 22:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.127 (still bad) 2009-Mar-08 22:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.125 (still bad) 2009-Mar-08 22:39:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.125 (still bad) 2009-Mar-08 22:39:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:39:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:39:07 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Mar-08 22:39:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:39:07 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Mar-08 22:39:07 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2009-Mar-08 22:39:07 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2009-Mar-08 22:39:07 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2009-Mar-08 22:39:07 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:39:07 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18602 J 2009-Mar-08 22:39:07 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:39:07 LOG2 antvel: Parameters to Doppler: Topocentric 95947 2009 67 0.0 2009-Mar-08 22:39:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:39:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2009-Mar-08 22:39:07 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2009-Mar-08 22:39:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:39:07 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:39:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Mar-08 22:39:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:39:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Mar-08 22:39:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:39:07 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Mar-08 22:39:07 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.330075 2009.1860200712349 18.999933 2009-Mar-08 22:39:07 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777772 23.455222222222222 2009-Mar-08 22:39:07 LOG4 log_alfabeam: ALFABEAM 1 9.512219370628348 23.355111600911648 2009-Mar-08 22:39:07 LOG4 log_alfabeam: ALFABEAM 2 9.519018969567858 23.382956494239671 2009-Mar-08 22:39:07 LOG4 log_alfabeam: ALFABEAM 3 9.521656598656469 23.482716472326651 2009-Mar-08 22:39:07 LOG4 log_alfabeam: ALFABEAM 4 9.517297766567957 23.555581543745227 2009-Mar-08 22:39:07 LOG4 log_alfabeam: ALFABEAM 5 9.510420236419607 23.526823746336575 2009-Mar-08 22:39:07 LOG4 log_alfabeam: ALFABEAM 6 9.507979952916649 23.426131687304796 2009-Mar-08 22:39:07 INFO2 take_data: Starting WAPP+GALFA scan: 906700154 2009-Mar-08 22:39:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:39:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:39:08 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Mar-08 22:39:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:39:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Mar-08 22:39:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:39:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:39:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.126 (still bad) 2009-Mar-08 22:39:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9549.00 2009-Mar-08 22:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:39:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.126 (still bad) 2009-Mar-08 22:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.126 (still bad) 2009-Mar-08 22:39:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-08 22:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.125 (still bad) 2009-Mar-08 22:39:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:39:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-08 22:39:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:39:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:39:19 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Mar-08 22:39:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:39:19 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Mar-08 22:39:19 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2009-Mar-08 22:39:19 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2009-Mar-08 22:39:19 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2009-Mar-08 22:39:19 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:39:19 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18602 J 2009-Mar-08 22:39:19 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:39:19 LOG2 antvel: Parameters to Doppler: Topocentric 95959 2009 67 0.0 2009-Mar-08 22:39:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:39:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2009-Mar-08 22:39:19 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2009-Mar-08 22:39:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:39:19 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:39:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Mar-08 22:39:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:39:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Mar-08 22:39:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:39:19 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Mar-08 22:39:19 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.333418 2009.1860204514919 18.999933 2009-Mar-08 22:39:19 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777766 23.455222222222226 2009-Mar-08 22:39:19 LOG4 log_alfabeam: ALFABEAM 1 9.512273029194226 23.354854918799457 2009-Mar-08 22:39:19 LOG4 log_alfabeam: ALFABEAM 2 9.519057394541040 23.383388099402296 2009-Mar-08 22:39:19 LOG4 log_alfabeam: ALFABEAM 3 9.521641825848359 23.483411554547065 2009-Mar-08 22:39:19 LOG4 log_alfabeam: ALFABEAM 4 9.517243734714016 23.555835292698237 2009-Mar-08 22:39:19 LOG4 log_alfabeam: ALFABEAM 5 9.510381713294786 23.526377829756111 2009-Mar-08 22:39:19 LOG4 log_alfabeam: ALFABEAM 6 9.507995914008401 23.425438998754604 2009-Mar-08 22:39:19 INFO2 take_data: Starting WAPP+GALFA scan: 906700155 2009-Mar-08 22:39:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:39:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:39:20 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Mar-08 22:39:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:39:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Mar-08 22:39:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:39:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:39:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-08 22:39:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9561.00 2009-Mar-08 22:39:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:39:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:39:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:39:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:39:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:39:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:39:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:39:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:39:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-08 22:39:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-08 22:39:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.007 0.942 1.096 1.095 2009-Mar-08 22:39:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.044 0.996 0.896 1.126 2009-Mar-08 22:39:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.917 0.992 1.086 1.054 2009-Mar-08 22:39:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.952 0.112 1.048 0.121 2009-Mar-08 22:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-08 22:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-08 22:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-08 22:39:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:39:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:39:31 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Mar-08 22:39:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:39:31 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Mar-08 22:39:31 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2009-Mar-08 22:39:31 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2009-Mar-08 22:39:31 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2009-Mar-08 22:39:31 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:39:31 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18602 J 2009-Mar-08 22:39:31 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:39:31 LOG2 antvel: Parameters to Doppler: Topocentric 95971 2009 67 0.0 2009-Mar-08 22:39:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:39:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2009-Mar-08 22:39:31 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2009-Mar-08 22:39:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:39:31 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:39:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Mar-08 22:39:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:39:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Mar-08 22:39:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:39:31 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Mar-08 22:39:31 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.336760 2009.1860208317489 18.999933 2009-Mar-08 22:39:31 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777752 23.455222222222215 2009-Mar-08 22:39:31 LOG4 log_alfabeam: ALFABEAM 1 9.512327211496933 23.354601894663272 2009-Mar-08 22:39:31 LOG4 log_alfabeam: ALFABEAM 2 9.519095864414430 23.383826733842621 2009-Mar-08 22:39:31 LOG4 log_alfabeam: ALFABEAM 3 9.521626569674609 23.484110149725556 2009-Mar-08 22:39:31 LOG4 log_alfabeam: ALFABEAM 4 9.517189179132094 23.556085294327627 2009-Mar-08 22:39:31 LOG4 log_alfabeam: ALFABEAM 5 9.510343160323496 23.525924762128692 2009-Mar-08 22:39:31 LOG4 log_alfabeam: ALFABEAM 6 9.508012364157107 23.424743047561485 2009-Mar-08 22:39:31 INFO2 take_data: Starting WAPP+GALFA scan: 906700156 2009-Mar-08 22:39:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:39:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:39:32 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Mar-08 22:39:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:39:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Mar-08 22:39:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:39:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:39:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:39:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9573.00 2009-Mar-08 22:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-08 22:39:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:39:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:39:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:39:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:39:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:39:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:39:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:39:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:39:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.128 (still bad) 2009-Mar-08 22:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.128 (still bad) 2009-Mar-08 22:39:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.128 (still bad) 2009-Mar-08 22:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.129 (still bad) 2009-Mar-08 22:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.128 (still bad) 2009-Mar-08 22:39:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:39:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:39:43 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Mar-08 22:39:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:39:43 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Mar-08 22:39:43 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Mar-08 22:39:43 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Mar-08 22:39:43 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Mar-08 22:39:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-08 22:39:43 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Mar-08 22:39:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:39:43 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-08 22:39:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Mar-08 22:39:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-08 22:39:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-08 22:39:43 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Mar-08 22:39:43 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2009-Mar-08 22:39:43 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2009-Mar-08 22:39:43 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-Mar-08 22:39:43 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:39:43 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18602 J 2009-Mar-08 22:39:43 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:39:43 LOG2 antvel: Parameters to Doppler: Topocentric 95983 2009 67 0.0 2009-Mar-08 22:39:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:39:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-Mar-08 22:39:43 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-Mar-08 22:39:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:39:43 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:39:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Mar-08 22:39:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:39:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Mar-08 22:39:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:39:43 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2009-Mar-08 22:39:43 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.340103 2009.1860212120059 18.999933 2009-Mar-08 22:39:43 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777754 23.455222222222226 2009-Mar-08 22:39:43 LOG4 log_alfabeam: ALFABEAM 1 9.512381949020671 23.354352519259692 2009-Mar-08 22:39:43 LOG4 log_alfabeam: ALFABEAM 2 9.519134394170344 23.384272716145581 2009-Mar-08 22:39:43 LOG4 log_alfabeam: ALFABEAM 3 9.521610813619318 23.484812590315101 2009-Mar-08 22:39:43 LOG4 log_alfabeam: ALFABEAM 4 9.517134068265360 23.556331555234120 2009-Mar-08 22:39:43 LOG4 log_alfabeam: ALFABEAM 5 9.510304562851989 23.525464219241222 2009-Mar-08 22:39:43 LOG4 log_alfabeam: ALFABEAM 6 9.508029320243864 23.424043507531156 2009-Mar-08 22:39:43 INFO2 take_data: Starting WAPP+GALFA scan: 906700157 2009-Mar-08 22:39:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:39:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:39:44 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2009-Mar-08 22:39:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:39:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Mar-08 22:39:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:39:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:39:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:39:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9585.00 2009-Mar-08 22:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-08 22:39:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:39:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:39:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:39:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:39:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:39:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:39:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:39:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:39:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.114 and 1.640 (still bad) 2009-Mar-08 22:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.644 (still bad) 2009-Mar-08 22:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.645 (still bad) 2009-Mar-08 22:39:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.647 (still bad) 2009-Mar-08 22:39:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:39:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.114 and 1.645 (still bad) 2009-Mar-08 22:39:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:39:55 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2009-Mar-08 22:39:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:39:55 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2009-Mar-08 22:39:55 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2009-Mar-08 22:39:55 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2009-Mar-08 22:39:55 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2009-Mar-08 22:39:55 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:39:55 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18602 J 2009-Mar-08 22:39:55 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:39:55 LOG2 antvel: Parameters to Doppler: Topocentric 95995 2009 67 0.0 2009-Mar-08 22:39:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:39:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2009-Mar-08 22:39:55 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2009-Mar-08 22:39:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:39:55 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:39:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Mar-08 22:39:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:39:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Mar-08 22:39:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:39:55 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2009-Mar-08 22:39:55 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.343445 2009.1860215922629 18.999933 2009-Mar-08 22:39:55 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777763 23.455222222222222 2009-Mar-08 22:39:55 LOG4 log_alfabeam: ALFABEAM 1 9.512437207759310 23.354107085547003 2009-Mar-08 22:39:55 LOG4 log_alfabeam: ALFABEAM 2 9.519172952486414 23.384725833090599 2009-Mar-08 22:39:55 LOG4 log_alfabeam: ALFABEAM 3 9.521594559804134 23.485518366268739 2009-Mar-08 22:39:55 LOG4 log_alfabeam: ALFABEAM 4 9.517078436498846 23.556573783538525 2009-Mar-08 22:39:55 LOG4 log_alfabeam: ALFABEAM 5 9.510265952620424 23.524996426226792 2009-Mar-08 22:39:55 LOG4 log_alfabeam: ALFABEAM 6 9.508046779064651 23.423340891582665 2009-Mar-08 22:39:55 INFO2 take_data: Starting WAPP+GALFA scan: 906700158 2009-Mar-08 22:39:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:39:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:39:56 LOG5 begin_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2009-Mar-08 22:39:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:39:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Mar-08 22:39:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:39:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:39:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:39:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9597.00 2009-Mar-08 22:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.114 and 1.645 (still bad) 2009-Mar-08 22:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:39:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:39:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.569 (still bad) 2009-Mar-08 22:40:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.568 (still bad) 2009-Mar-08 22:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.568 (still bad) 2009-Mar-08 22:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.567 (still bad) 2009-Mar-08 22:40:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:40:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:40:07 LOG5 end_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2009-Mar-08 22:40:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:40:07 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2009-Mar-08 22:40:07 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2009-Mar-08 22:40:07 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2009-Mar-08 22:40:07 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2009-Mar-08 22:40:07 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:40:07 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18602 J 2009-Mar-08 22:40:07 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:40:07 LOG2 antvel: Parameters to Doppler: Topocentric 96007 2009 67 0.0 2009-Mar-08 22:40:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:40:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2009-Mar-08 22:40:07 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2009-Mar-08 22:40:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:40:07 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:40:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Mar-08 22:40:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:40:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Mar-08 22:40:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:40:07 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Mar-08 22:40:07 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.346788 2009.1860219725202 18.999933 2009-Mar-08 22:40:07 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777750 23.455222222222233 2009-Mar-08 22:40:07 LOG4 log_alfabeam: ALFABEAM 1 9.512493019195032 23.353865592014362 2009-Mar-08 22:40:07 LOG4 log_alfabeam: ALFABEAM 2 9.519211553928658 23.385186406845580 2009-Mar-08 22:40:07 LOG4 log_alfabeam: ALFABEAM 3 9.521577791283367 23.486227805850096 2009-Mar-08 22:40:07 LOG4 log_alfabeam: ALFABEAM 4 9.517022252287109 23.556811978101301 2009-Mar-08 22:40:07 LOG4 log_alfabeam: ALFABEAM 5 9.510227315407239 23.524521055534002 2009-Mar-08 22:40:07 LOG4 log_alfabeam: ALFABEAM 6 9.508064757906073 23.422634877876696 2009-Mar-08 22:40:07 INFO2 take_data: Starting WAPP+GALFA scan: 906700159 2009-Mar-08 22:40:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:40:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:40:08 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Mar-08 22:40:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:40:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Mar-08 22:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.567 (still bad) 2009-Mar-08 22:40:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:40:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:40:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:40:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9609.00 2009-Mar-08 22:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:40:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.565 (still bad) 2009-Mar-08 22:40:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:40:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.565 (still bad) 2009-Mar-08 22:40:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.564 (still bad) 2009-Mar-08 22:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.565 (still bad) 2009-Mar-08 22:40:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:40:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.565 (still bad) 2009-Mar-08 22:40:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:40:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:40:19 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Mar-08 22:40:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:40:19 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Mar-08 22:40:19 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2009-Mar-08 22:40:19 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2009-Mar-08 22:40:19 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2009-Mar-08 22:40:19 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:40:19 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18602 J 2009-Mar-08 22:40:19 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:40:19 LOG2 antvel: Parameters to Doppler: Topocentric 96019 2009 67 0.0 2009-Mar-08 22:40:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:40:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2009-Mar-08 22:40:19 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2009-Mar-08 22:40:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:40:19 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:40:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Mar-08 22:40:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:40:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Mar-08 22:40:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:40:19 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Mar-08 22:40:19 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.350130 2009.1860223527772 18.999933 2009-Mar-08 22:40:19 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777761 23.455222222222222 2009-Mar-08 22:40:19 LOG4 log_alfabeam: ALFABEAM 1 9.512549348014176 23.353628329884295 2009-Mar-08 22:40:19 LOG4 log_alfabeam: ALFABEAM 2 9.519250166665101 23.385654210089751 2009-Mar-08 22:40:19 LOG4 log_alfabeam: ALFABEAM 3 9.521560510973348 23.486940386253213 2009-Mar-08 22:40:19 LOG4 log_alfabeam: ALFABEAM 4 9.516965551331284 23.557045848997198 2009-Mar-08 22:40:19 LOG4 log_alfabeam: ALFABEAM 5 9.510188683439170 23.524038346933125 2009-Mar-08 22:40:19 LOG4 log_alfabeam: ALFABEAM 6 9.508083252732238 23.421925991615812 2009-Mar-08 22:40:19 INFO2 take_data: Starting WAPP+GALFA scan: 906700160 2009-Mar-08 22:40:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:40:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:40:20 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Mar-08 22:40:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:40:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Mar-08 22:40:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:40:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:40:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.564 (still bad) 2009-Mar-08 22:40:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9621.00 2009-Mar-08 22:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:40:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.561 (still bad) 2009-Mar-08 22:40:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.562 (still bad) 2009-Mar-08 22:40:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-08 22:40:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.397 1.293 1.498 1.498 2009-Mar-08 22:40:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.455 1.395 1.255 1.563 2009-Mar-08 22:40:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.290 1.394 1.528 1.425 2009-Mar-08 22:40:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.344 0.112 1.480 0.121 2009-Mar-08 22:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.563 (still bad) 2009-Mar-08 22:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.562 (still bad) 2009-Mar-08 22:40:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:40:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:40:31 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Mar-08 22:40:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:40:31 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Mar-08 22:40:31 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2009-Mar-08 22:40:31 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2009-Mar-08 22:40:31 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2009-Mar-08 22:40:31 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:40:31 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18602 J 2009-Mar-08 22:40:31 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:40:31 LOG2 antvel: Parameters to Doppler: Topocentric 96031 2009 67 0.0 2009-Mar-08 22:40:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:40:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2009-Mar-08 22:40:31 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2009-Mar-08 22:40:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:40:31 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:40:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Mar-08 22:40:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:40:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Mar-08 22:40:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:40:31 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Mar-08 22:40:31 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.353473 2009.1860227330342 18.999933 2009-Mar-08 22:40:31 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777773 23.455222222222215 2009-Mar-08 22:40:31 LOG4 log_alfabeam: ALFABEAM 1 9.512606225655547 23.353395305293684 2009-Mar-08 22:40:31 LOG4 log_alfabeam: ALFABEAM 2 9.519288804830762 23.386129568114981 2009-Mar-08 22:40:31 LOG4 log_alfabeam: ALFABEAM 3 9.521542701525593 23.487656431160897 2009-Mar-08 22:40:31 LOG4 log_alfabeam: ALFABEAM 4 9.516908302138944 23.557275387441454 2009-Mar-08 22:40:31 LOG4 log_alfabeam: ALFABEAM 5 9.510150042940259 23.523547970012231 2009-Mar-08 22:40:31 LOG4 log_alfabeam: ALFABEAM 6 9.508102281207318 23.421213915681133 2009-Mar-08 22:40:31 INFO2 take_data: Starting WAPP+GALFA scan: 906700161 2009-Mar-08 22:40:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:40:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:40:32 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Mar-08 22:40:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:40:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Mar-08 22:40:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:40:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:40:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:40:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9633.00 2009-Mar-08 22:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.562 (still bad) 2009-Mar-08 22:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:40:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:40:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.562 (still bad) 2009-Mar-08 22:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.562 (still bad) 2009-Mar-08 22:40:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.563 (still bad) 2009-Mar-08 22:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.561 (still bad) 2009-Mar-08 22:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.563 (still bad) 2009-Mar-08 22:40:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:40:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:40:43 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Mar-08 22:40:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:40:43 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Mar-08 22:40:43 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2009-Mar-08 22:40:43 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2009-Mar-08 22:40:43 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2009-Mar-08 22:40:43 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:40:43 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18602 J 2009-Mar-08 22:40:43 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:40:43 LOG2 antvel: Parameters to Doppler: Topocentric 96043 2009 67 0.0 2009-Mar-08 22:40:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:40:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2009-Mar-08 22:40:43 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2009-Mar-08 22:40:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:40:43 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:40:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Mar-08 22:40:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:40:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Mar-08 22:40:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:40:43 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Mar-08 22:40:43 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.356815 2009.1860231132912 18.999933 2009-Mar-08 22:40:43 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777768 23.455222222222215 2009-Mar-08 22:40:43 LOG4 log_alfabeam: ALFABEAM 1 9.512663615465815 23.353166806917407 2009-Mar-08 22:40:43 LOG4 log_alfabeam: ALFABEAM 2 9.519327436112418 23.386612238798339 2009-Mar-08 22:40:43 LOG4 log_alfabeam: ALFABEAM 3 9.521524366713292 23.488375405099987 2009-Mar-08 22:40:43 LOG4 log_alfabeam: ALFABEAM 4 9.516850541758817 23.557500306288219 2009-Mar-08 22:40:43 LOG4 log_alfabeam: ALFABEAM 5 9.510111426592132 23.523050179881643 2009-Mar-08 22:40:43 LOG4 log_alfabeam: ALFABEAM 6 9.508121838402069 23.420499187418564 2009-Mar-08 22:40:43 INFO2 take_data: Starting WAPP+GALFA scan: 906700162 2009-Mar-08 22:40:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:40:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:40:44 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Mar-08 22:40:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:40:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:40:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Mar-08 22:40:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:40:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:40:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:40:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9645.00 2009-Mar-08 22:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.562 (still bad) 2009-Mar-08 22:40:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:40:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:40:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:40:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:40:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:40:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:40:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:40:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:40:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.564 (still bad) 2009-Mar-08 22:40:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.564 (still bad) 2009-Mar-08 22:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.564 (still bad) 2009-Mar-08 22:40:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:40:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.564 (still bad) 2009-Mar-08 22:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.567 (still bad) 2009-Mar-08 22:40:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:40:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:40:55 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Mar-08 22:40:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:40:55 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Mar-08 22:40:55 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2009-Mar-08 22:40:55 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2009-Mar-08 22:40:55 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2009-Mar-08 22:40:55 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:40:55 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18602 J 2009-Mar-08 22:40:55 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:40:55 LOG2 antvel: Parameters to Doppler: Topocentric 96055 2009 67 0.0 2009-Mar-08 22:40:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:40:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2009-Mar-08 22:40:55 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2009-Mar-08 22:40:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:40:55 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:40:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Mar-08 22:40:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:40:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Mar-08 22:40:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:40:55 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Mar-08 22:40:55 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.360157 2009.1860234935482 18.999933 2009-Mar-08 22:40:55 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777770 23.455222222222226 2009-Mar-08 22:40:55 LOG4 log_alfabeam: ALFABEAM 1 9.512721531390751 23.352942914694452 2009-Mar-08 22:40:55 LOG4 log_alfabeam: ALFABEAM 2 9.519366062645716 23.387102402279965 2009-Mar-08 22:40:55 LOG4 log_alfabeam: ALFABEAM 3 9.521505494542811 23.489097410324607 2009-Mar-08 22:40:55 LOG4 log_alfabeam: ALFABEAM 4 9.516792256311458 23.557720524077592 2009-Mar-08 22:40:55 LOG4 log_alfabeam: ALFABEAM 5 9.510072832618658 23.522544796131150 2009-Mar-08 22:40:55 LOG4 log_alfabeam: ALFABEAM 6 9.508141936232242 23.419781709852131 2009-Mar-08 22:40:55 INFO2 take_data: Starting WAPP+GALFA scan: 906700163 2009-Mar-08 22:40:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:40:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:40:56 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Mar-08 22:40:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:40:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Mar-08 22:40:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:40:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:40:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:40:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9657.00 2009-Mar-08 22:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.567 (still bad) 2009-Mar-08 22:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:40:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:40:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.567 (still bad) 2009-Mar-08 22:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.567 (still bad) 2009-Mar-08 22:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.566 (still bad) 2009-Mar-08 22:41:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.568 (still bad) 2009-Mar-08 22:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.568 (still bad) 2009-Mar-08 22:41:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:41:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:41:07 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Mar-08 22:41:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:41:07 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Mar-08 22:41:07 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Mar-08 22:41:07 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Mar-08 22:41:07 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Mar-08 22:41:07 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-08 22:41:07 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-08 22:41:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-08 22:41:07 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Mar-08 22:41:07 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-08 22:41:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-08 22:41:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-08 22:41:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-08 22:41:07 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Mar-08 22:41:07 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Mar-08 22:41:07 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2009-Mar-08 22:41:07 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2009-Mar-08 22:41:07 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-Mar-08 22:41:07 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:41:07 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18602 J 2009-Mar-08 22:41:07 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:41:07 LOG2 antvel: Parameters to Doppler: Topocentric 96067 2009 67 0.0 2009-Mar-08 22:41:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:41:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-Mar-08 22:41:07 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-Mar-08 22:41:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:41:07 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:41:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Mar-08 22:41:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:41:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Mar-08 22:41:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:41:07 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2009-Mar-08 22:41:08 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.363500 2009.1860238738054 18.999933 2009-Mar-08 22:41:08 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777757 23.455222222222222 2009-Mar-08 22:41:08 LOG4 log_alfabeam: ALFABEAM 1 9.512779987633035 23.352723715010104 2009-Mar-08 22:41:08 LOG4 log_alfabeam: ALFABEAM 2 9.519404686338250 23.387600244317031 2009-Mar-08 22:41:08 LOG4 log_alfabeam: ALFABEAM 3 9.521486072524214 23.489822548302378 2009-Mar-08 22:41:08 LOG4 log_alfabeam: ALFABEAM 4 9.516733431665815 23.557935952857228 2009-Mar-08 22:41:08 LOG4 log_alfabeam: ALFABEAM 5 9.510034259488084 23.522031632819463 2009-Mar-08 22:41:08 LOG4 log_alfabeam: ALFABEAM 6 9.508162587098285 23.419061387005659 2009-Mar-08 22:41:08 INFO2 take_data: Starting WAPP+GALFA scan: 906700164 2009-Mar-08 22:41:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:41:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:41:08 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2009-Mar-08 22:41:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:41:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Mar-08 22:41:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:41:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:41:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:41:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9669.00 2009-Mar-08 22:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.568 (still bad) 2009-Mar-08 22:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:41:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.165 (still bad) 2009-Mar-08 22:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.162 (still bad) 2009-Mar-08 22:41:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.166 (still bad) 2009-Mar-08 22:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.163 (still bad) 2009-Mar-08 22:41:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:41:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:41:19 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2009-Mar-08 22:41:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:41:19 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2009-Mar-08 22:41:19 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2009-Mar-08 22:41:19 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2009-Mar-08 22:41:19 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2009-Mar-08 22:41:19 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:41:19 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18602 J 2009-Mar-08 22:41:19 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:41:19 LOG2 antvel: Parameters to Doppler: Topocentric 96079 2009 67 0.0 2009-Mar-08 22:41:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:41:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2009-Mar-08 22:41:19 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2009-Mar-08 22:41:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:41:19 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:41:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Mar-08 22:41:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:41:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Mar-08 22:41:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:41:19 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2009-Mar-08 22:41:19 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.366842 2009.1860242540624 18.999933 2009-Mar-08 22:41:19 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777768 23.455222222222215 2009-Mar-08 22:41:19 LOG4 log_alfabeam: ALFABEAM 1 9.512838945477403 23.352509491058708 2009-Mar-08 22:41:19 LOG4 log_alfabeam: ALFABEAM 2 9.519443274219094 23.388105499283586 2009-Mar-08 22:41:19 LOG4 log_alfabeam: ALFABEAM 3 9.521466105836598 23.490550264886899 2009-Mar-08 22:41:19 LOG4 log_alfabeam: ALFABEAM 4 9.516674106943315 23.558146311334479 2009-Mar-08 22:41:19 LOG4 log_alfabeam: ALFABEAM 5 9.509995740493746 23.521510969360513 2009-Mar-08 22:41:19 LOG4 log_alfabeam: ALFABEAM 6 9.508183784613060 23.418338774019304 2009-Mar-08 22:41:19 INFO2 take_data: Starting WAPP+GALFA scan: 906700165 2009-Mar-08 22:41:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:41:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:41:20 LOG5 begin_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2009-Mar-08 22:41:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:41:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Mar-08 22:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.164 (still bad) 2009-Mar-08 22:41:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:41:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:41:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:41:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9681.00 2009-Mar-08 22:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.165 (still bad) 2009-Mar-08 22:41:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:41:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.134 (still bad) 2009-Mar-08 22:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.135 (still bad) 2009-Mar-08 22:41:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 22:41:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.005 0.948 1.094 1.097 2009-Mar-08 22:41:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 1.005 0.904 1.135 2009-Mar-08 22:41:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.913 0.992 1.094 1.065 2009-Mar-08 22:41:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.111 1.038 0.121 2009-Mar-08 22:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.135 (still bad) 2009-Mar-08 22:41:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:41:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:41:31 LOG5 end_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2009-Mar-08 22:41:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:41:31 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2009-Mar-08 22:41:31 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2009-Mar-08 22:41:31 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2009-Mar-08 22:41:31 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2009-Mar-08 22:41:31 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:41:31 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18602 J 2009-Mar-08 22:41:31 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:41:31 LOG2 antvel: Parameters to Doppler: Topocentric 96091 2009 67 0.0 2009-Mar-08 22:41:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:41:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2009-Mar-08 22:41:31 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2009-Mar-08 22:41:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:41:31 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:41:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Mar-08 22:41:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:41:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Mar-08 22:41:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:41:31 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2009-Mar-08 22:41:31 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.370185 2009.1860246343194 18.999933 2009-Mar-08 22:41:31 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777770 23.455222222222215 2009-Mar-08 22:41:31 LOG4 log_alfabeam: ALFABEAM 1 9.512898436073515 23.352300267393229 2009-Mar-08 22:41:31 LOG4 log_alfabeam: ALFABEAM 2 9.519481839299139 23.388618498124046 2009-Mar-08 22:41:31 LOG4 log_alfabeam: ALFABEAM 3 9.521445576259948 23.491280870778365 2009-Mar-08 22:41:31 LOG4 log_alfabeam: ALFABEAM 4 9.516614250964496 23.558351572362135 2009-Mar-08 22:41:31 LOG4 log_alfabeam: ALFABEAM 5 9.509957263012561 23.520982470420925 2009-Mar-08 22:41:31 LOG4 log_alfabeam: ALFABEAM 6 9.508205547244900 23.417613566978535 2009-Mar-08 22:41:31 INFO2 take_data: Starting WAPP+GALFA scan: 906700166 2009-Mar-08 22:41:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:41:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:41:32 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2009-Mar-08 22:41:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:41:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Mar-08 22:41:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:41:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:41:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.135 (still bad) 2009-Mar-08 22:41:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9693.00 2009-Mar-08 22:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:41:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.133 (still bad) 2009-Mar-08 22:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.133 (still bad) 2009-Mar-08 22:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.133 (still bad) 2009-Mar-08 22:41:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:41:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.133 (still bad) 2009-Mar-08 22:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.132 (still bad) 2009-Mar-08 22:41:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:41:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:41:43 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2009-Mar-08 22:41:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:41:43 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2009-Mar-08 22:41:43 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2009-Mar-08 22:41:43 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2009-Mar-08 22:41:43 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2009-Mar-08 22:41:43 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:41:43 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18603 J 2009-Mar-08 22:41:43 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:41:43 LOG2 antvel: Parameters to Doppler: Topocentric 96103 2009 67 0.0 2009-Mar-08 22:41:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:41:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2009-Mar-08 22:41:43 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2009-Mar-08 22:41:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:41:43 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:41:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Mar-08 22:41:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:41:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Mar-08 22:41:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:41:43 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2009-Mar-08 22:41:43 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.373527 2009.1860250145764 18.999933 2009-Mar-08 22:41:43 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777757 23.455222222222215 2009-Mar-08 22:41:43 LOG4 log_alfabeam: ALFABEAM 1 9.512958419302421 23.352096322358467 2009-Mar-08 22:41:43 LOG4 log_alfabeam: ALFABEAM 2 9.519520348219393 23.389138958697014 2009-Mar-08 22:41:43 LOG4 log_alfabeam: ALFABEAM 3 9.521424489992480 23.492013799711685 2009-Mar-08 22:41:43 LOG4 log_alfabeam: ALFABEAM 4 9.516553904260318 23.558551459761585 2009-Mar-08 22:41:43 LOG4 log_alfabeam: ALFABEAM 5 9.509918860690718 23.520446432453703 2009-Mar-08 22:41:43 LOG4 log_alfabeam: ALFABEAM 6 9.508227867554794 23.416886332493117 2009-Mar-08 22:41:43 INFO2 take_data: Starting WAPP+GALFA scan: 906700167 2009-Mar-08 22:41:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:41:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:41:44 LOG5 begin_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2009-Mar-08 22:41:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:41:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Mar-08 22:41:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:41:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:41:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.132 (still bad) 2009-Mar-08 22:41:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9705.00 2009-Mar-08 22:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.128 (still bad) 2009-Mar-08 22:41:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.128 (still bad) 2009-Mar-08 22:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.129 (still bad) 2009-Mar-08 22:41:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:41:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.129 (still bad) 2009-Mar-08 22:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.129 (still bad) 2009-Mar-08 22:41:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:41:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:41:55 LOG5 end_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2009-Mar-08 22:41:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:41:55 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2009-Mar-08 22:41:55 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2009-Mar-08 22:41:55 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2009-Mar-08 22:41:55 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2009-Mar-08 22:41:55 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:41:55 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18603 J 2009-Mar-08 22:41:55 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:41:55 LOG2 antvel: Parameters to Doppler: Topocentric 96115 2009 67 0.0 2009-Mar-08 22:41:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:41:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2009-Mar-08 22:41:55 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2009-Mar-08 22:41:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:41:55 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:41:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Mar-08 22:41:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:41:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Mar-08 22:41:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:41:55 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2009-Mar-08 22:41:55 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.376870 2009.1860253948335 18.999933 2009-Mar-08 22:41:55 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777757 23.455222222222240 2009-Mar-08 22:41:55 LOG4 log_alfabeam: ALFABEAM 1 9.513018926127890 23.351897687455487 2009-Mar-08 22:41:55 LOG4 log_alfabeam: ALFABEAM 2 9.519558813530548 23.389667213299443 2009-Mar-08 22:41:55 LOG4 log_alfabeam: ALFABEAM 3 9.521402828526718 23.492749356673567 2009-Mar-08 22:41:55 LOG4 log_alfabeam: ALFABEAM 4 9.516493035846780 23.558745939478303 2009-Mar-08 22:41:55 LOG4 log_alfabeam: ALFABEAM 5 9.509880521373413 23.519902519088632 2009-Mar-08 22:41:55 LOG4 log_alfabeam: ALFABEAM 6 9.508250764270793 23.416156772394608 2009-Mar-08 22:41:55 INFO2 take_data: Starting WAPP+GALFA scan: 906700168 2009-Mar-08 22:41:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:41:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:41:56 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2009-Mar-08 22:41:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:41:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Mar-08 22:41:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:41:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:41:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:41:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9717.00 2009-Mar-08 22:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.129 (still bad) 2009-Mar-08 22:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:41:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.129 (still bad) 2009-Mar-08 22:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.130 (still bad) 2009-Mar-08 22:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.128 (still bad) 2009-Mar-08 22:42:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.128 (still bad) 2009-Mar-08 22:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.127 (still bad) 2009-Mar-08 22:42:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:42:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:42:07 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2009-Mar-08 22:42:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:42:07 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2009-Mar-08 22:42:07 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2009-Mar-08 22:42:07 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2009-Mar-08 22:42:07 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2009-Mar-08 22:42:07 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:42:07 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18603 J 2009-Mar-08 22:42:07 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:42:07 LOG2 antvel: Parameters to Doppler: Topocentric 96127 2009 67 0.0 2009-Mar-08 22:42:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:42:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2009-Mar-08 22:42:07 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2009-Mar-08 22:42:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:42:07 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:42:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Mar-08 22:42:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:42:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Mar-08 22:42:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:42:07 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Mar-08 22:42:07 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.380212 2009.1860257750907 18.999933 2009-Mar-08 22:42:07 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777761 23.455222222222222 2009-Mar-08 22:42:07 LOG4 log_alfabeam: ALFABEAM 1 9.513079915010016 23.351704635154530 2009-Mar-08 22:42:07 LOG4 log_alfabeam: ALFABEAM 2 9.519597201532134 23.390202962624659 2009-Mar-08 22:42:07 LOG4 log_alfabeam: ALFABEAM 3 9.521380599146353 23.493486963642187 2009-Mar-08 22:42:07 LOG4 log_alfabeam: ALFABEAM 4 9.516431687680655 23.558934741484880 2009-Mar-08 22:42:07 LOG4 log_alfabeam: ALFABEAM 5 9.509842279009339 23.519351044454339 2009-Mar-08 22:42:07 LOG4 log_alfabeam: ALFABEAM 6 9.508274228837850 23.415425464349624 2009-Mar-08 22:42:07 INFO2 take_data: Starting WAPP+GALFA scan: 906700169 2009-Mar-08 22:42:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:42:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:42:08 LOG5 begin_task: Level: (4) ID = <10098> Status = 0 0 0 0 ok 2009-Mar-08 22:42:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:42:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Mar-08 22:42:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:42:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:42:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:42:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9729.00 2009-Mar-08 22:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.127 (still bad) 2009-Mar-08 22:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:42:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.128 (still bad) 2009-Mar-08 22:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.130 (still bad) 2009-Mar-08 22:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.128 (still bad) 2009-Mar-08 22:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.128 (still bad) 2009-Mar-08 22:42:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:42:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:42:19 LOG5 end_task: Level: (4) ID = <10098> Status = 0 0 0 0 ok 2009-Mar-08 22:42:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:42:19 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Mar-08 22:42:19 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2009-Mar-08 22:42:19 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2009-Mar-08 22:42:19 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2009-Mar-08 22:42:19 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:42:19 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18603 J 2009-Mar-08 22:42:19 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:42:19 LOG2 antvel: Parameters to Doppler: Topocentric 96139 2009 67 0.0 2009-Mar-08 22:42:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:42:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2009-Mar-08 22:42:19 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2009-Mar-08 22:42:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:42:19 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:42:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Mar-08 22:42:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:42:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2009-Mar-08 22:42:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:42:19 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2009-Mar-08 22:42:19 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.383555 2009.1860261553477 18.999933 2009-Mar-08 22:42:19 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777766 23.455222222222222 2009-Mar-08 22:42:19 LOG4 log_alfabeam: ALFABEAM 1 9.513141416688295 23.351517203586294 2009-Mar-08 22:42:19 LOG4 log_alfabeam: ALFABEAM 2 9.519635524313905 23.390746539786747 2009-Mar-08 22:42:19 LOG4 log_alfabeam: ALFABEAM 3 9.521357783094500 23.494226919657514 2009-Mar-08 22:42:19 LOG4 log_alfabeam: ALFABEAM 4 9.516369829011230 23.559117825149126 2009-Mar-08 22:42:19 LOG4 log_alfabeam: ALFABEAM 5 9.509804121910472 23.518791671688675 2009-Mar-08 22:42:19 LOG4 log_alfabeam: ALFABEAM 6 9.508298280205342 23.414692116134990 2009-Mar-08 22:42:19 INFO2 take_data: Starting WAPP+GALFA scan: 906700170 2009-Mar-08 22:42:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:42:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:42:20 LOG5 begin_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2009-Mar-08 22:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.129 (still bad) 2009-Mar-08 22:42:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:42:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Mar-08 22:42:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:42:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:42:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:42:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9741.00 2009-Mar-08 22:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.129 (still bad) 2009-Mar-08 22:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.130 (still bad) 2009-Mar-08 22:42:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.132 (still bad) 2009-Mar-08 22:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.130 (still bad) 2009-Mar-08 22:42:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-08 22:42:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.008 0.944 1.093 1.092 2009-Mar-08 22:42:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.984 0.898 1.129 2009-Mar-08 22:42:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.915 0.991 1.083 1.056 2009-Mar-08 22:42:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.953 0.112 1.049 0.122 2009-Mar-08 22:42:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:42:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:42:31 LOG5 end_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2009-Mar-08 22:42:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:42:31 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2009-Mar-08 22:42:31 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Mar-08 22:42:31 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Mar-08 22:42:31 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Mar-08 22:42:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-08 22:42:31 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2009-Mar-08 22:42:31 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-08 22:42:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Mar-08 22:42:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-08 22:42:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-08 22:42:31 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2009-Mar-08 22:42:31 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2009-Mar-08 22:42:31 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2009-Mar-08 22:42:31 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2009-Mar-08 22:42:31 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:42:31 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18603 J 2009-Mar-08 22:42:31 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:42:31 LOG2 antvel: Parameters to Doppler: Topocentric 96151 2009 67 0.0 2009-Mar-08 22:42:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:42:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2009-Mar-08 22:42:31 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2009-Mar-08 22:42:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:42:31 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:42:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Mar-08 22:42:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:42:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Mar-08 22:42:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:42:31 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2009-Mar-08 22:42:31 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.386897 2009.1860265356047 18.999933 2009-Mar-08 22:42:31 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777759 23.455222222222226 2009-Mar-08 22:42:31 LOG4 log_alfabeam: ALFABEAM 1 9.513203388190430 23.351335658266706 2009-Mar-08 22:42:31 LOG4 log_alfabeam: ALFABEAM 2 9.519673747886042 23.391297627696407 2009-Mar-08 22:42:31 LOG4 log_alfabeam: ALFABEAM 3 9.521334388806638 23.494968635392429 2009-Mar-08 22:42:31 LOG4 log_alfabeam: ALFABEAM 4 9.516307503231426 23.559294927685809 2009-Mar-08 22:42:31 LOG4 log_alfabeam: ALFABEAM 5 9.509766084272021 23.518224733195225 2009-Mar-08 22:42:31 LOG4 log_alfabeam: ALFABEAM 6 9.508322908638323 23.413957315972635 2009-Mar-08 22:42:31 INFO2 take_data: Starting WAPP+GALFA scan: 906700171 2009-Mar-08 22:42:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:42:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:42:32 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2009-Mar-08 22:42:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:42:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2009-Mar-08 22:42:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:42:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:42:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.131 (still bad) 2009-Mar-08 22:42:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9753.00 2009-Mar-08 22:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:42:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.131 (still bad) 2009-Mar-08 22:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.639 (still bad) 2009-Mar-08 22:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.640 (still bad) 2009-Mar-08 22:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.640 (still bad) 2009-Mar-08 22:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.640 (still bad) 2009-Mar-08 22:42:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:42:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:42:43 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2009-Mar-08 22:42:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:42:43 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2009-Mar-08 22:42:43 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2009-Mar-08 22:42:43 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2009-Mar-08 22:42:43 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2009-Mar-08 22:42:43 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:42:43 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18603 J 2009-Mar-08 22:42:43 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:42:43 LOG2 antvel: Parameters to Doppler: Topocentric 96163 2009 67 0.0 2009-Mar-08 22:42:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:42:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2009-Mar-08 22:42:43 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2009-Mar-08 22:42:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:42:43 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:42:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Mar-08 22:42:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:42:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Mar-08 22:42:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:42:43 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-Mar-08 22:42:43 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.390240 2009.1860269158617 18.999933 2009-Mar-08 22:42:43 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777800 23.455222222222211 2009-Mar-08 22:42:43 LOG4 log_alfabeam: ALFABEAM 1 9.513265859995732 23.351160043585455 2009-Mar-08 22:42:43 LOG4 log_alfabeam: ALFABEAM 2 9.519711883880344 23.391856559746103 2009-Mar-08 22:42:43 LOG4 log_alfabeam: ALFABEAM 3 9.521310397316688 23.495712403756169 2009-Mar-08 22:42:43 LOG4 log_alfabeam: ALFABEAM 4 9.516244679859806 23.559466002266333 2009-Mar-08 22:42:43 LOG4 log_alfabeam: ALFABEAM 5 9.509728154867581 23.517649892164741 2009-Mar-08 22:42:43 LOG4 log_alfabeam: ALFABEAM 6 9.508348133267713 23.413220777732977 2009-Mar-08 22:42:43 INFO2 take_data: Starting WAPP+GALFA scan: 906700172 2009-Mar-08 22:42:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:42:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:42:44 LOG5 begin_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2009-Mar-08 22:42:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:42:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2009-Mar-08 22:42:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:42:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:42:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:42:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9765.00 2009-Mar-08 22:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.641 (still bad) 2009-Mar-08 22:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.113 and 1.641 (still bad) 2009-Mar-08 22:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.570 (still bad) 2009-Mar-08 22:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.570 (still bad) 2009-Mar-08 22:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.570 (still bad) 2009-Mar-08 22:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.568 (still bad) 2009-Mar-08 22:42:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:42:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:42:55 LOG5 end_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2009-Mar-08 22:42:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:42:55 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-Mar-08 22:42:55 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2009-Mar-08 22:42:55 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2009-Mar-08 22:42:55 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2009-Mar-08 22:42:55 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:42:55 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18603 J 2009-Mar-08 22:42:55 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:42:55 LOG2 antvel: Parameters to Doppler: Topocentric 96175 2009 67 0.0 2009-Mar-08 22:42:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:42:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2009-Mar-08 22:42:55 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2009-Mar-08 22:42:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:42:55 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:42:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Mar-08 22:42:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:42:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Mar-08 22:42:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:42:55 LOG5 begin_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2009-Mar-08 22:42:55 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.393582 2009.1860272961189 18.999933 2009-Mar-08 22:42:55 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777759 23.455222222222233 2009-Mar-08 22:42:55 LOG4 log_alfabeam: ALFABEAM 1 9.513328787694036 23.350990616974464 2009-Mar-08 22:42:55 LOG4 log_alfabeam: ALFABEAM 2 9.519749898075473 23.392423000487650 2009-Mar-08 22:42:55 LOG4 log_alfabeam: ALFABEAM 3 9.521285818277610 23.496457624661396 2009-Mar-08 22:42:55 LOG4 log_alfabeam: ALFABEAM 4 9.516181403729158 23.559630794487603 2009-Mar-08 22:42:55 LOG4 log_alfabeam: ALFABEAM 5 9.509690368077276 23.517067499828887 2009-Mar-08 22:42:55 LOG4 log_alfabeam: ALFABEAM 6 9.508373943115865 23.412483099599307 2009-Mar-08 22:42:55 INFO2 take_data: Starting WAPP+GALFA scan: 906700173 2009-Mar-08 22:42:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:42:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:42:56 LOG5 begin_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2009-Mar-08 22:42:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:42:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2009-Mar-08 22:42:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:42:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:42:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:42:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9777.00 2009-Mar-08 22:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.570 (still bad) 2009-Mar-08 22:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.567 (still bad) 2009-Mar-08 22:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.568 (still bad) 2009-Mar-08 22:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.568 (still bad) 2009-Mar-08 22:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.568 (still bad) 2009-Mar-08 22:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.568 (still bad) 2009-Mar-08 22:43:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:43:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:43:07 LOG5 end_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2009-Mar-08 22:43:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:43:07 LOG5 end_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2009-Mar-08 22:43:07 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2009-Mar-08 22:43:07 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2009-Mar-08 22:43:07 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2009-Mar-08 22:43:07 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:43:07 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18603 J 2009-Mar-08 22:43:07 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:43:07 LOG2 antvel: Parameters to Doppler: Topocentric 96187 2009 67 0.0 2009-Mar-08 22:43:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:43:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2009-Mar-08 22:43:07 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2009-Mar-08 22:43:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:43:07 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:43:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Mar-08 22:43:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:43:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Mar-08 22:43:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:43:07 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2009-Mar-08 22:43:07 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.396925 2009.1860276763759 18.999933 2009-Mar-08 22:43:07 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777754 23.455222222222226 2009-Mar-08 22:43:07 LOG4 log_alfabeam: ALFABEAM 1 9.513392201471003 23.350827428661685 2009-Mar-08 22:43:07 LOG4 log_alfabeam: ALFABEAM 2 9.519787801651985 23.392997283056413 2009-Mar-08 22:43:07 LOG4 log_alfabeam: ALFABEAM 3 9.521260632555457 23.497204584757512 2009-Mar-08 22:43:07 LOG4 log_alfabeam: ALFABEAM 4 9.516117644660303 23.559789251755973 2009-Mar-08 22:43:07 LOG4 log_alfabeam: ALFABEAM 5 9.509652713127007 23.516477219969978 2009-Mar-08 22:43:07 LOG4 log_alfabeam: ALFABEAM 6 9.508400357454025 23.411744001629049 2009-Mar-08 22:43:07 INFO2 take_data: Starting WAPP+GALFA scan: 906700174 2009-Mar-08 22:43:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:43:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:43:08 LOG5 begin_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2009-Mar-08 22:43:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:43:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2009-Mar-08 22:43:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:43:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:43:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:43:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9789.00 2009-Mar-08 22:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.567 (still bad) 2009-Mar-08 22:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:43:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.565 (still bad) 2009-Mar-08 22:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.567 (still bad) 2009-Mar-08 22:43:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.565 (still bad) 2009-Mar-08 22:43:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.566 (still bad) 2009-Mar-08 22:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.566 (still bad) 2009-Mar-08 22:43:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:43:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:43:19 LOG5 end_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2009-Mar-08 22:43:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:43:19 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2009-Mar-08 22:43:19 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2009-Mar-08 22:43:19 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2009-Mar-08 22:43:19 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2009-Mar-08 22:43:19 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:43:19 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18603 J 2009-Mar-08 22:43:19 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:43:19 LOG2 antvel: Parameters to Doppler: Topocentric 96199 2009 67 0.0 2009-Mar-08 22:43:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:43:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2009-Mar-08 22:43:19 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2009-Mar-08 22:43:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:43:19 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:43:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Mar-08 22:43:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:43:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Mar-08 22:43:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:43:19 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2009-Mar-08 22:43:19 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.400267 2009.1860280566329 18.999933 2009-Mar-08 22:43:19 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777759 23.455222222222226 2009-Mar-08 22:43:19 LOG4 log_alfabeam: ALFABEAM 1 9.513456055480562 23.350670726821189 2009-Mar-08 22:43:19 LOG4 log_alfabeam: ALFABEAM 2 9.519825560220500 23.393579053119090 2009-Mar-08 22:43:19 LOG4 log_alfabeam: ALFABEAM 3 9.521234851085318 23.497952673838771 2009-Mar-08 22:43:19 LOG4 log_alfabeam: ALFABEAM 4 9.516053448922859 23.559941129232847 2009-Mar-08 22:43:19 LOG4 log_alfabeam: ALFABEAM 5 9.509615224514620 23.515879423145037 2009-Mar-08 22:43:19 LOG4 log_alfabeam: ALFABEAM 6 9.508427364000985 23.411004091277238 2009-Mar-08 22:43:19 INFO2 take_data: Starting WAPP+GALFA scan: 906700175 2009-Mar-08 22:43:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:43:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:43:20 LOG5 begin_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2009-Mar-08 22:43:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:43:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2009-Mar-08 22:43:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:43:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:43:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:43:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9801.00 2009-Mar-08 22:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.566 (still bad) 2009-Mar-08 22:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:43:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.566 (still bad) 2009-Mar-08 22:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.567 (still bad) 2009-Mar-08 22:43:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.566 (still bad) 2009-Mar-08 22:43:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.566 (still bad) 2009-Mar-08 22:43:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:43:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:43:31 LOG5 end_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2009-Mar-08 22:43:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:43:31 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2009-Mar-08 22:43:31 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2009-Mar-08 22:43:31 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2009-Mar-08 22:43:31 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2009-Mar-08 22:43:31 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:43:31 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18603 J 2009-Mar-08 22:43:31 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:43:31 LOG2 antvel: Parameters to Doppler: Topocentric 96211 2009 67 0.0 2009-Mar-08 22:43:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:43:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2009-Mar-08 22:43:31 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2009-Mar-08 22:43:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:43:31 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:43:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Mar-08 22:43:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:43:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Mar-08 22:43:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:43:31 LOG5 begin_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2009-Mar-08 22:43:31 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.403609 2009.18602843689 18.999933 2009-Mar-08 22:43:31 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777766 23.455222222222222 2009-Mar-08 22:43:31 LOG4 log_alfabeam: ALFABEAM 1 9.513520360276310 23.350520610968658 2009-Mar-08 22:43:31 LOG4 log_alfabeam: ALFABEAM 2 9.519863173289465 23.394168465521314 2009-Mar-08 22:43:31 LOG4 log_alfabeam: ALFABEAM 3 9.521208462594938 23.498701947864539 2009-Mar-08 22:43:31 LOG4 log_alfabeam: ALFABEAM 4 9.515988806078147 23.560086326605852 2009-Mar-08 22:43:31 LOG4 log_alfabeam: ALFABEAM 5 9.509577903046178 23.515273956567263 2009-Mar-08 22:43:31 LOG4 log_alfabeam: ALFABEAM 6 9.508454973774544 23.410263316591561 2009-Mar-08 22:43:31 INFO2 take_data: Starting WAPP+GALFA scan: 906700176 2009-Mar-08 22:43:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:43:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:43:32 LOG5 begin_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2009-Mar-08 22:43:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:43:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2009-Mar-08 22:43:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-08 22:43:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.401 1.293 1.494 1.495 2009-Mar-08 22:43:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.449 1.381 1.254 1.567 2009-Mar-08 22:43:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.286 1.389 1.521 1.418 2009-Mar-08 22:43:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.348 0.112 1.483 0.121 2009-Mar-08 22:43:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:43:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:43:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:43:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9813.00 2009-Mar-08 22:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:43:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.569 (still bad) 2009-Mar-08 22:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.569 (still bad) 2009-Mar-08 22:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.571 (still bad) 2009-Mar-08 22:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.569 (still bad) 2009-Mar-08 22:43:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:43:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-08 22:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.569 (still bad) 2009-Mar-08 22:43:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:43:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:43:43 LOG5 end_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2009-Mar-08 22:43:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:43:43 LOG5 end_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2009-Mar-08 22:43:43 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2009-Mar-08 22:43:43 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2009-Mar-08 22:43:43 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2009-Mar-08 22:43:43 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:43:43 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18603 J 2009-Mar-08 22:43:43 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:43:43 LOG2 antvel: Parameters to Doppler: Topocentric 96223 2009 67 0.0 2009-Mar-08 22:43:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:43:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2009-Mar-08 22:43:43 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2009-Mar-08 22:43:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:43:43 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:43:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Mar-08 22:43:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:43:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2009-Mar-08 22:43:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Mar-08 22:43:43 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Mar-08 22:43:43 LOG5 log_alfabeam: Parameters: 9.5147777777777769 23.455222222222218 9.406952 2009.186028817147 18.999933 2009-Mar-08 22:43:43 LOG4 log_alfabeam: ALFABEAM 0 9.514777777777772 23.455222222222226 2009-Mar-08 22:43:43 LOG4 log_alfabeam: ALFABEAM 1 9.513585126509572 23.350377187057020 2009-Mar-08 22:43:43 LOG4 log_alfabeam: ALFABEAM 2 9.519900640065403 23.394765679099191 2009-Mar-08 22:43:43 LOG4 log_alfabeam: ALFABEAM 3 9.521181455402374 23.499452460331430 2009-Mar-08 22:43:43 LOG4 log_alfabeam: ALFABEAM 4 9.515923705595927 23.560224737114190 2009-Mar-08 22:43:43 LOG4 log_alfabeam: ALFABEAM 5 9.509540749841161 23.514660663608780 2009-Mar-08 22:43:43 LOG4 log_alfabeam: ALFABEAM 6 9.508483198187168 23.409521628206999 2009-Mar-08 22:43:43 INFO2 take_data: Starting WAPP+GALFA scan: 906700177 2009-Mar-08 22:43:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2009-Mar-08 22:43:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Mar-08 22:43:44 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2009-Mar-08 22:43:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:43:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2009-Mar-08 22:43:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:43:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:43:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.568 (still bad) 2009-Mar-08 22:43:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9825.00 2009-Mar-08 22:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.571 (still bad) 2009-Mar-08 22:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.571 (still bad) 2009-Mar-08 22:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.572 (still bad) 2009-Mar-08 22:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.570 (still bad) 2009-Mar-08 22:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.570 (still bad) 2009-Mar-08 22:43:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:43:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Mar-08 22:43:55 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2009-Mar-08 22:43:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Mar-08 22:43:55 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Mar-08 22:43:55 INFO2 smartfreq: Switching off CAL 2009-Mar-08 22:43:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-08 22:43:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-08 22:43:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-08 22:43:55 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Mar-08 22:43:55 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-08 22:43:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-08 22:43:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-08 22:43:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-08 22:43:55 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Mar-08 22:43:55 INFO3 restore_frequencies: Restoring original frequencies 2009-Mar-08 22:43:55 LOG5 antvel: Calling 'antvel 93053.200000 232718.800000 J 0' 2009-Mar-08 22:43:55 LOG2 antvel: Precessing RA = 09:30:53.2 Dec = +23:27:18.8 Epoch = 2009.18603 J 2009-Mar-08 22:43:55 LOG2 antvel: Computed apparent RA = 09:31:27.0 Dec = +23:24:47.1 2009-Mar-08 22:43:55 LOG2 antvel: Parameters to Doppler: Topocentric 96235 2009 67 0.0 2009-Mar-08 22:43:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Mar-08 22:43:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2009-Mar-08 22:43:55 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2009-Mar-08 22:43:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:43:55 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:43:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2009-Mar-08 22:43:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:43:55 STOP finish_task: Finishing task 'smart frequency switching' 2009-Mar-08 22:43:55 LOG5 finish_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2009-Mar-08 22:43:55 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Mar-08 22:43:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-08 22:43:55 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Mar-08 22:43:55 LOG5 end_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2009-Mar-08 22:43:55 NOTE run_command_file: DONE with command file processing 2009-Mar-08 22:43:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Mar-08 22:43:56 STOP finish_task: Finishing task 'running command file 'command_galfacurpos.cmd'' 2009-Mar-08 22:43:56 LOG5 finish_task: Level: (1) ID = <10031> Status = 0 0 0 0 ok 2009-Mar-08 22:43:56 DONE finish_task: DONE finished running: command file 'command_galfacurpos.cmd' 2009-Mar-08 22:43:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-08 22:43:56 END end_task: Finishing task 'running command file 'command_galfacurpos.cmd'' with status 'OK' 2009-Mar-08 22:43:56 LOG5 end_task: Level: (1) ID = <10031> Status = 0 0 0 0 ok 2009-Mar-08 22:43:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2009-Mar-08 22:43:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:43:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:43:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.570 (still bad) 2009-Mar-08 22:44:15 INFO1 CIMA-run_command_file: Transferring command file '090308.cmd ' to executive ... 2009-Mar-08 22:44:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2009-Mar-08 22:44:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2009-Mar-08 22:44:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 5 {CATALOG AGESFull.cat} 2009-Mar-08 22:44:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF LSTSLEW(AGES3193_p2_018) < 094033 THEN} 2009-Mar-08 22:44:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {FIXEDDRIFT az=210.41 alfaangle=-8.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_018 ra=95300.00 dec=232730.00} 2009-Mar-08 22:44:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {ENDIF} 2009-Mar-08 22:44:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 15 {IF LSTSLEW(AGES3193_p2_026) < 100633 THEN} 2009-Mar-08 22:44:15 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 16 {FIXEDDRIFT az=148.54 alfaangle=47.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_026 ra=95300.00 dec=231530.00} 2009-Mar-08 22:44:16 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 19 {ENDIF} 2009-Mar-08 22:44:16 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 22 {IF LSTSLEW(AGES3193_p2_028) < 102933 THEN} 2009-Mar-08 22:44:16 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 23 {FIXEDDRIFT az=121.29 alfaangle=77.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_028 ra=95300.00 dec=231230.00} 2009-Mar-08 22:44:16 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 26 {ENDIF} 2009-Mar-08 22:44:16 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 29 {IF LSTSLEW(AGES3193_p2_030) < 105232 THEN} 2009-Mar-08 22:44:16 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 30 {FIXEDDRIFT az=111.56 alfaangle=-89.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_030 ra=95300.00 dec=230930.00} 2009-Mar-08 22:44:16 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 33 {ENDIF} 2009-Mar-08 22:44:16 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Mar-08 22:44:16 LOG4 exec_msg: From OBSERVER: run_command_file 090308.cmd 1 1 15 2009-Mar-08 22:44:16 LOG4 run_command_file: Calling 'run_command_file 090308.cmd 1 1 15' 2009-Mar-08 22:44:16 BEGIN begin_task: Starting task 'running command file '090308.cmd'' 2009-Mar-08 22:44:16 LOG5 begin_task: Level: (1) ID = <10117> Status = 0 0 0 0 ok 2009-Mar-08 22:44:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '090308.cmd' ...} 2009-Mar-08 22:44:16 NOTE run_command_file: Starting execution of command file '090308.cmd' from line 1 2009-Mar-08 22:44:16 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2009-Mar-08 22:44:16 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Mar-08 22:44:16 NOTE CIMA-check_config_file: File 'ages_config.conf' contains an ALFA set-up which will be ignored! 2009-Mar-08 22:44:16 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-08 22:44:16 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Mar-08 22:44:16 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Mar-08 22:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-08 22:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-08 22:44:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-08 22:44:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-08 22:44:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Mar-08 22:44:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Mar-08 22:44:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Mar-08 22:44:19 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-08 22:44:19 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Mar-08 22:44:19 LOG5 begin_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2009-Mar-08 22:44:19 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Mar-08 22:44:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Mar-08 22:44:19 LOG1 config_iflo: Receiver ALFA already selected 2009-Mar-08 22:44:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-08 22:44:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-08 22:44:19 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-08 22:44:19 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-Mar-08 22:44:19 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-08 22:44:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-08 22:44:19 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-Mar-08 22:44:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-08 22:44:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-08 22:44:19 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Mar-08 22:44:19 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Mar-08 22:44:19 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Mar-08 22:44:19 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Mar-08 22:44:19 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Mar-08 22:44:19 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Mar-08 22:44:19 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Mar-08 22:44:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2009-Mar-08 22:44:19 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Mar-08 22:44:19 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Mar-08 22:44:19 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Mar-08 22:44:19 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Mar-08 22:44:19 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Mar-08 22:44:19 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Mar-08 22:44:19 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Mar-08 22:44:19 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Mar-08 22:44:19 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Mar-08 22:44:19 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Mar-08 22:44:19 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Mar-08 22:44:19 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Mar-08 22:44:19 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Mar-08 22:44:19 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Mar-08 22:44:19 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Mar-08 22:44:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:44:19 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Mar-08 22:44:19 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Mar-08 22:44:19 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Mar-08 22:44:19 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Mar-08 22:44:19 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Mar-08 22:44:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Mar-08 22:44:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 22:44:19 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Mar-08 22:44:19 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Mar-08 22:44:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2009-Mar-08 22:44:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Mar-08 22:44:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:44:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 22:44:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:44:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:44:19 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Mar-08 22:44:19 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Mar-08 22:44:19 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Mar-08 22:44:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Mar-08 22:44:19 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Mar-08 22:44:19 LOG5 finish_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2009-Mar-08 22:44:19 DONE finish_task: DONE finished configuration: IF/LO path 2009-Mar-08 22:44:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-08 22:44:19 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Mar-08 22:44:19 LOG5 end_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2009-Mar-08 22:44:19 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Mar-08 22:44:19 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Mar-08 22:44:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Mar-08 22:44:20 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Mar-08 22:44:20 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Mar-08 22:44:20 START begin_task: Starting task 'selecting calibration port' 2009-Mar-08 22:44:20 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2009-Mar-08 22:44:20 LOG3 vw_send: To DATATAKING: calport 3 2009-Mar-08 22:44:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Mar-08 22:44:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 22:44:20 START begin_task: Starting task 'waiting on calport' 2009-Mar-08 22:44:20 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2009-Mar-08 22:44:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:44:20 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Mar-08 22:44:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 22:44:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:44:20 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-08 22:44:20 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Mar-08 22:44:20 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2009-Mar-08 22:44:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Mar-08 22:44:20 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Mar-08 22:44:20 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2009-Mar-08 22:44:20 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-08 22:44:20 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-08 22:44:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-08 22:44:20 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2009-Mar-08 22:44:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:44:20 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-08 22:44:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-08 22:44:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-08 22:44:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-08 22:44:20 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2009-Mar-08 22:44:20 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Mar-08 22:44:20 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Mar-08 22:44:20 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Mar-08 22:44:20 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Mar-08 22:44:20 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Mar-08 22:44:20 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Mar-08 22:44:20 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Mar-08 22:44:20 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Mar-08 22:44:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2009-Mar-08 22:44:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2009-Mar-08 22:44:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2009-Mar-08 22:44:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2009-Mar-08 22:44:20 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Mar-08 22:44:20 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Mar-08 22:44:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-08 22:44:20 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Mar-08 22:44:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Mar-08 22:44:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Mar-08 22:44:20 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-08 22:44:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Mar-08 22:44:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-08 22:44:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-08 22:44:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-08 22:44:20 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Mar-08 22:44:20 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Mar-08 22:44:20 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Mar-08 22:44:20 LOG5 finish_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Mar-08 22:44:20 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Mar-08 22:44:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-08 22:44:21 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Mar-08 22:44:21 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Mar-08 22:44:21 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2009-Mar-08 22:44:21 COMMAND run_command_line: EXECUTING command 5: 'CATALOG AGESFull.cat' 2009-Mar-08 22:44:21 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2009-Mar-08 22:44:21 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGES3193_p2_018) < 094033 THEN' 2009-Mar-08 22:44:21 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_018) < 094033 2009-Mar-08 22:44:21 INFO5 is_if_valid: Condition parsed as: 9.4422580000000007 < 9.6758333333333333 2009-Mar-08 22:44:21 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=210.41 alfaangle=-8.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_018 ra=95300.00 dec=232730.00' 2009-Mar-08 22:44:21 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-Mar-08 22:44:21 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Mar-08 22:44:21 WARNING check_obsmode: WARNING failed to get a response from the CIMA frontend when checking options for 'fixed azimuth drift map'! 2009-Mar-08 22:44:21 NOTE check_obsmode: Assuming that the options are OK 2009-Mar-08 22:44:21 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 210.41 -8.6 hcorcal 5 tracking no first 1 AGES3193_p2_018 95300.00 232730.00 J 8500.0 Heliocentric velocity(optical)' 2009-Mar-08 22:44:21 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Mar-08 22:44:21 LOG5 begin_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2009-Mar-08 22:44:21 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'Cur-pos' 2009-Mar-08 22:44:21 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Mar-08 22:44:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_018} 2009-Mar-08 22:44:21 INFO3 fixed_driftmap: Sending telescope to Az = 210.41 and ZA = 5.90 2009-Mar-08 22:44:21 LOG3 track_source: Calling 'track_source AGES3193_p2_018 210.41 5.8999240741 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Mar-08 22:44:21 START begin_task: Starting task 'sending tracking commands' 2009-Mar-08 22:44:21 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Mar-08 22:44:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_018} INFO {Slewing to source 'AGES3193_p2_018' ...} 2009-Mar-08 22:44:21 INFO1 track_source: Starting to track AGES3193_p2_018 2009-Mar-08 22:44:21 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_018" 2009-Mar-08 22:44:21 LOG3 vw_send: To DATATAKING: set ra 210.41 2009-Mar-08 22:44:21 LOG3 vw_send: To DATATAKING: set dec 5.8999240741 2009-Mar-08 22:44:21 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-08 22:44:21 LOG3 vw_send: To DATATAKING: pnt tr 210.41 5.8999240741 -CF 2009-Mar-08 22:44:21 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Mar-08 22:44:21 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-08 22:44:21 LOG5 finish_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Mar-08 22:44:21 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-08 22:44:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 22:44:22 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-08 22:44:22 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Mar-08 22:44:22 START begin_task: Starting task 'rotate ALFA to -8.6 degrees' 2009-Mar-08 22:44:22 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2009-Mar-08 22:44:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -8.6 degrees ...} 2009-Mar-08 22:44:22 INFO2 rotate_alfa: ALFA commanded to -8.6 degrees 2009-Mar-08 22:44:22 LOG3 sock_errsend: To ALFAMOTOR: POSITION -8.6 REPLY 2009-Mar-08 22:44:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Mar-08 22:44:22 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Mar-08 22:44:22 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Mar-08 22:44:22 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-08 22:44:22 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_018" 2009-Mar-08 22:44:22 LOG4 got_cormsg: From DATATAKING: set ra 210.41 2009-Mar-08 22:44:22 LOG4 got_cormsg: From DATATAKING: set dec 5.8999240741 2009-Mar-08 22:44:22 LOG4 got_cormsg: From DATATAKING: vw% 210.41 2009-Mar-08 22:44:22 LOG4 got_cormsg: From DATATAKING: vw% 5.8999240741 2009-Mar-08 22:44:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:44:22 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-08 22:44:22 LOG4 got_cormsg: From DATATAKING: pnt tr 210.41 5.8999240741 -CF 2009-Mar-08 22:44:22 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Mar-08 22:44:22 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-08 22:44:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:44:38 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Mar-08 22:44:38 INFO3 alfa_motor: ALFA rotator in-position -8.60 degrees 2009-Mar-08 22:44:38 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Mar-08 22:44:38 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Mar-08 22:44:38 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-08 22:44:38 STOP finish_task: Finishing task 'rotate ALFA to -8.6 degrees' 2009-Mar-08 22:44:38 LOG5 finish_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2009-Mar-08 22:44:38 INFO2 finish_task: DONE finished configuration: rotating ALFA to -8.6 degrees 2009-Mar-08 22:44:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 22:44:38 STOP end_task: Finishing task 'rotate ALFA to -8.6 degrees' with status 'OK' 2009-Mar-08 22:44:38 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2009-Mar-08 22:44:38 START begin_task: Starting task 'waiting on telescope' 2009-Mar-08 22:44:38 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Mar-08 22:44:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Mar-08 22:44:38 LOG3 waittrk: Start waittrk 5 2009-Mar-08 22:44:38 START begin_task: Starting task 'waiting on telescope movement' 2009-Mar-08 22:44:38 LOG5 begin_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2009-Mar-08 22:44:43 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Mar-08 22:44:43 LOG5 end_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2009-Mar-08 22:44:43 START begin_task: Starting task 'waiting on telescope on source' 2009-Mar-08 22:44:43 LOG5 begin_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2009-Mar-08 22:45:09 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Mar-08 22:45:09 LOG5 end_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2009-Mar-08 22:45:09 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-08 22:45:09 INFO2 waittrk: Now tracking AGES3193_p2_018 2009-Mar-08 22:45:09 LOG4 waittrk: Current telescope position: Az = 210.02 ZA = 5.92 2009-Mar-08 22:45:09 STOP finish_task: Finishing task 'waiting on telescope' 2009-Mar-08 22:45:09 LOG5 finish_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Mar-08 22:45:09 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Mar-08 22:45:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 22:45:09 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Mar-08 22:45:09 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Mar-08 22:45:09 START begin_task: Starting task 'selecting calibration type' 2009-Mar-08 22:45:09 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2009-Mar-08 22:45:09 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-08 22:45:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-08 22:45:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 22:45:09 START begin_task: Starting task 'waiting on setcal' 2009-Mar-08 22:45:09 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2009-Mar-08 22:45:09 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-08 22:45:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 22:45:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:45:09 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-08 22:45:09 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-08 22:45:09 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2009-Mar-08 22:45:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-08 22:45:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-08 22:45:09 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-08 22:45:09 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-08 22:45:09 LOG5 begin_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2009-Mar-08 22:45:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:45:09 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-08 22:45:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-08 22:45:09 LOG5 end_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2009-Mar-08 22:45:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-08 22:45:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-08 22:45:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-08 22:45:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-08 22:45:09 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-08 22:45:09 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2009-Mar-08 22:45:09 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-08 22:45:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-08 22:45:09 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2009-Mar-08 22:45:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-08 22:45:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-08 22:45:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-08 22:45:09 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2009-Mar-08 22:45:09 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-Mar-08 22:45:10 INFO2 astwait: Waiting for 819 seconds from 02:45:10 to 02:58:49 UTC ... 2009-Mar-08 22:45:10 LOG4 send_obs_status: To obs_status: <1> TASKTIME 819 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Mar-08 22:45:10 START begin_task: Starting task 'waiting on waiting for AST time' 2009-Mar-08 22:45:10 LOG5 begin_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2009-Mar-08 22:58:49 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-Mar-08 22:58:49 LOG5 end_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2009-Mar-08 22:58:49 INFO3 astwait: Finished waiting 2009-Mar-08 22:58:49 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-08 22:58:49 LOG5 dopset_later: Calling 'dopset_later 60.699956077692669' 2009-Mar-08 22:58:49 INFO3 dopset_later: Setting Doppler correction for 22:59:49 (60.7 seconds from now) 2009-Mar-08 22:58:49 LOG5 antvel: Calling 'antvel 210.410000 5.899924 F 60.699956077692669' 2009-Mar-08 22:58:49 LOG2 antvel: Transforming current Az = 210.41 ZA = 5.90 to apparent RA = 09:53:33.3 Dec = +23:24:46.8 2009-Mar-08 22:58:49 LOG2 antvel: Parameters to Doppler: Heliocentric 97189 2009 67 0.0 2009-Mar-08 22:58:49 INFO5 antvel: Computed antenna velocity: +12.60068 km/s 2009-Mar-08 22:58:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=12.6006798425 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-Mar-08 22:58:49 INFO4 dopset_gen: New sky frequencies: 1381.185375 1381.185375 1381.185375 1381.185375 1381.185375 1381.185375 1381.185375 1381.185375 1381.185375 2009-Mar-08 22:58:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.185375 sky0=1381.185375 sky1=1381.185375 sky2=1381.185375 sky3=1381.185375 sky4=1381.185375 sky5=1381.185375 sky6=1381.185375 sky7=1381.185375 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 22:58:49 LOG2 dopset_gen: Result from 'sky2syn': 1631.185375 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 22:58:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631185375.0} 2009-Mar-08 22:58:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:58:49 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-Mar-08 22:58:49 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-Mar-08 22:58:49 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:04.5 Dec = +23:27:23.1 2009-Mar-08 22:58:49 LOG3 track_source: Calling 'track_source AGES3193_p2_018 095204.5 232723.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Mar-08 22:58:49 START begin_task: Starting task 'sending tracking commands' 2009-Mar-08 22:58:49 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2009-Mar-08 22:58:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_018} INFO {Slewing to source 'AGES3193_p2_018' ...} 2009-Mar-08 22:58:49 INFO1 track_source: Starting to track AGES3193_p2_018 2009-Mar-08 22:58:49 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_018" 2009-Mar-08 22:58:49 LOG3 vw_send: To DATATAKING: set ra 095204.5 2009-Mar-08 22:58:49 LOG3 vw_send: To DATATAKING: set dec 232723.1 2009-Mar-08 22:58:49 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-08 22:58:49 LOG3 vw_send: To DATATAKING: pnt tr 095204.5 232723.1 -CJ 2009-Mar-08 22:58:49 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Mar-08 22:58:49 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-08 22:58:49 LOG5 finish_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2009-Mar-08 22:58:49 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-08 22:58:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 22:58:49 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-08 22:58:49 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2009-Mar-08 22:58:49 START begin_task: Starting task 'waiting on telescope' 2009-Mar-08 22:58:49 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2009-Mar-08 22:58:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Mar-08 22:58:49 LOG3 waittrk: Start waittrk 5 2009-Mar-08 22:58:49 START begin_task: Starting task 'waiting on telescope movement' 2009-Mar-08 22:58:49 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-Mar-08 22:58:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631185375.0} 2009-Mar-08 22:58:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 22:58:49 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_018" 2009-Mar-08 22:58:49 LOG4 got_cormsg: From DATATAKING: vw% set ra 095204.5 2009-Mar-08 22:58:49 LOG4 got_cormsg: From DATATAKING: set dec 232723.1 2009-Mar-08 22:58:49 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-08 22:58:49 LOG4 got_cormsg: From DATATAKING: 095204.5 2009-Mar-08 22:58:49 LOG4 got_cormsg: From DATATAKING: vw% 232723.1 2009-Mar-08 22:58:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:58:49 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-08 22:58:49 LOG4 got_cormsg: From DATATAKING: pnt tr 095204.5 232723.1 -CJ 2009-Mar-08 22:58:49 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Mar-08 22:58:49 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2009-Mar-08 22:58:54 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Mar-08 22:58:54 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-Mar-08 22:58:54 START begin_task: Starting task 'waiting on telescope on source' 2009-Mar-08 22:58:54 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2009-Mar-08 22:59:00 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Mar-08 22:59:00 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2009-Mar-08 22:59:00 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-08 22:59:00 INFO2 waittrk: Now tracking AGES3193_p2_018 2009-Mar-08 22:59:00 LOG4 waittrk: Current telescope position: Az = 209.79 ZA = 5.90 2009-Mar-08 22:59:00 STOP finish_task: Finishing task 'waiting on telescope' 2009-Mar-08 22:59:00 LOG5 finish_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2009-Mar-08 22:59:00 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Mar-08 22:59:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 22:59:00 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Mar-08 22:59:00 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2009-Mar-08 22:59:00 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-08 22:59:00 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-Mar-08 22:59:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Mar-08 22:59:00 INFO2 adjust_power: Starting to adjust WAPP power 2009-Mar-08 22:59:00 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Mar-08 22:59:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Mar-08 22:59:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 22:59:00 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Mar-08 22:59:00 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2009-Mar-08 22:59:01 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Mar-08 22:59:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 22:59:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:59:04 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-08 22:59:04 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Mar-08 22:59:04 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2009-Mar-08 22:59:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Mar-08 22:59:04 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-08 22:59:04 LOG5 begin_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2009-Mar-08 22:59:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Mar-08 22:59:04 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-08 22:59:04 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-08 22:59:04 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-08 22:59:05 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-08 22:59:05 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Mar-08 22:59:05 LOG5 begin_task: Level: (5) ID = <10145> Status = 0 0 0 0 ok 2009-Mar-08 22:59:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Mar-08 22:59:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:59:05 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Mar-08 22:59:05 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 3 dB 2009-Mar-08 22:59:05 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2009-Mar-08 22:59:05 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Mar-08 22:59:05 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Mar-08 22:59:05 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Mar-08 22:59:05 LOG5 end_task: Level: (5) ID = <10145> Status = 0 0 0 0 ok 2009-Mar-08 22:59:05 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.009 0.927 ALFA beam 1: 1.099 1.074 2009-Mar-08 22:59:05 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.040 0.983 ALFA beam 3: 0.894 0.898 2009-Mar-08 22:59:05 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.911 0.977 ALFA beam 5: 1.087 1.053 2009-Mar-08 22:59:05 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.964 0.111 ALFA beam 7: 1.063 0.121 2009-Mar-08 22:59:05 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-08 22:59:05 LOG5 finish_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2009-Mar-08 22:59:05 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Mar-08 22:59:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 22:59:05 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-08 22:59:05 LOG5 end_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2009-Mar-08 22:59:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Mar-08 22:59:05 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-08 22:59:05 LOG5 finish_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-Mar-08 22:59:05 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Mar-08 22:59:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 22:59:05 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-08 22:59:05 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-Mar-08 22:59:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2009-Mar-08 22:59:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2009-Mar-08 22:59:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2009-Mar-08 22:59:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2009-Mar-08 22:59:05 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-Mar-08 22:59:05 START begin_task: Starting task 'WAPP calibration' 2009-Mar-08 22:59:05 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2009-Mar-08 22:59:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Mar-08 22:59:05 START begin_task: Starting task 'selecting calibration type' 2009-Mar-08 22:59:05 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2009-Mar-08 22:59:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-08 22:59:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-08 22:59:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 22:59:05 START begin_task: Starting task 'waiting on setcal' 2009-Mar-08 22:59:05 LOG5 begin_task: Level: (5) ID = <10148> Status = 0 0 0 0 ok 2009-Mar-08 22:59:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Mar-08 22:59:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-08 22:59:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 22:59:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:59:06 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-08 22:59:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-08 22:59:06 LOG5 end_task: Level: (5) ID = <10148> Status = 0 0 0 0 ok 2009-Mar-08 22:59:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-08 22:59:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-08 22:59:06 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-08 22:59:06 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-08 22:59:06 LOG5 begin_task: Level: (5) ID = <10149> Status = 0 0 0 0 ok 2009-Mar-08 22:59:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:59:06 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-08 22:59:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-08 22:59:06 LOG5 end_task: Level: (5) ID = <10149> Status = 0 0 0 0 ok 2009-Mar-08 22:59:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-08 22:59:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-08 22:59:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-08 22:59:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-08 22:59:06 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-08 22:59:06 LOG5 begin_task: Level: (5) ID = <10150> Status = 0 0 0 0 ok 2009-Mar-08 22:59:06 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-08 22:59:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-08 22:59:06 LOG5 end_task: Level: (5) ID = <10150> Status = 0 0 0 0 ok 2009-Mar-08 22:59:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-08 22:59:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-08 22:59:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-08 22:59:06 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2009-Mar-08 22:59:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Mar-08 22:59:06 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Mar-08 22:59:06 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Mar-08 22:59:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-08 22:59:06 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2009-Mar-08 22:59:06 NOTE WAPPDATA-new_file: New FITS file: wapp.20090308.a2048.0001.fits 2009-Mar-08 22:59:06 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090308.a2048.0001.fits} 2009-Mar-08 22:59:06 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-08 22:59:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Mar-08 22:59:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-08 22:59:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-08 22:59:06 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2009-Mar-08 22:59:06 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-Mar-08 22:59:06 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-Mar-08 22:59:06 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-08 22:59:06 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2009-Mar-08 22:59:06 LOG5 log_alfabeam: Parameters: 9.8679166666666678 23.456416666666666 9.664043 2009.1860580652522 -8.600101 2009-Mar-08 22:59:06 LOG4 log_alfabeam: ALFABEAM 0 9.867916666666657 23.456416666666676 2009-Mar-08 22:59:06 LOG4 log_alfabeam: ALFABEAM 1 9.868283193385228 23.355769288552835 2009-Mar-08 22:59:06 LOG4 log_alfabeam: ALFABEAM 2 9.874129338198843 23.422737622436955 2009-Mar-08 22:59:06 LOG4 log_alfabeam: ALFABEAM 3 9.873749027963230 23.523919507952410 2009-Mar-08 22:59:06 LOG4 log_alfabeam: ALFABEAM 4 9.867428298677897 23.557422949305913 2009-Mar-08 22:59:06 LOG4 log_alfabeam: ALFABEAM 5 9.861679410781539 23.488599687463349 2009-Mar-08 22:59:06 LOG4 log_alfabeam: ALFABEAM 6 9.862153218523499 23.388123981889354 2009-Mar-08 22:59:06 INFO2 take_data: Starting WAPP scan: 906700178 2009-Mar-08 22:59:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Mar-08 22:59:07 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-08 22:59:07 LOG5 begin_task: Level: (5) ID = <10153> Status = 0 0 0 0 ok 2009-Mar-08 22:59:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:59:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 22:59:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.009 0.927 1.099 1.074 2009-Mar-08 22:59:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 0.983 0.894 0.898 2009-Mar-08 22:59:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.911 0.977 1.087 1.053 2009-Mar-08 22:59:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.964 0.111 1.063 0.121 2009-Mar-08 22:59:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10748.00 2009-Mar-08 22:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.185375 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.185375 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.185375 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.185375 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.185375 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 22:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.185375 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.185375 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.185375 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:59:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.185375 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:59:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:59:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-08 22:59:13 LOG5 end_task: Level: (5) ID = <10153> Status = 0 0 0 0 ok 2009-Mar-08 22:59:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-08 22:59:13 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2009-Mar-08 22:59:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Mar-08 22:59:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-08 22:59:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-08 22:59:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-08 22:59:13 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2009-Mar-08 22:59:14 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-08 22:59:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-08 22:59:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-08 22:59:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-08 22:59:14 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2009-Mar-08 22:59:14 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-Mar-08 22:59:14 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-Mar-08 22:59:14 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-08 22:59:14 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2009-Mar-08 22:59:14 LOG5 log_alfabeam: Parameters: 9.8679166666666678 23.456416666666666 9.665993 2009.1860582870688 -8.600101 2009-Mar-08 22:59:14 LOG4 log_alfabeam: ALFABEAM 0 9.867916666666662 23.456416666666680 2009-Mar-08 22:59:14 LOG4 log_alfabeam: ALFABEAM 1 9.868313125401455 23.355791333092458 2009-Mar-08 22:59:14 LOG4 log_alfabeam: ALFABEAM 2 9.874139337538205 23.423088023673856 2009-Mar-08 22:59:14 LOG4 log_alfabeam: ALFABEAM 3 9.873728861516819 23.524248342123933 2009-Mar-08 22:59:14 LOG4 log_alfabeam: ALFABEAM 4 9.867397926482255 23.557394836725074 2009-Mar-08 22:59:14 LOG4 log_alfabeam: ALFABEAM 5 9.861669820896509 23.488244485059329 2009-Mar-08 22:59:14 LOG4 log_alfabeam: ALFABEAM 6 9.862173763944242 23.387797304826158 2009-Mar-08 22:59:14 INFO2 take_data: Starting WAPP scan: 906700179 2009-Mar-08 22:59:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Mar-08 22:59:14 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-08 22:59:14 LOG5 begin_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2009-Mar-08 22:59:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:59:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10755.00 2009-Mar-08 22:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.530 (still bad) 2009-Mar-08 22:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.185375 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.185375 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.185375 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.185375 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.185375 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.185375 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.185375 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.185375 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.185375 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:59:20 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-Mar-08 22:59:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 22:59:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-08 22:59:20 LOG5 end_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2009-Mar-08 22:59:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-08 22:59:20 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2009-Mar-08 22:59:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Mar-08 22:59:20 STOP finish_task: Finishing task 'WAPP calibration' 2009-Mar-08 22:59:20 LOG5 finish_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2009-Mar-08 22:59:20 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Mar-08 22:59:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 22:59:20 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Mar-08 22:59:20 LOG5 end_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2009-Mar-08 22:59:21 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-Mar-08 22:59:21 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 210.41 and ZA = 5.90 2009-Mar-08 22:59:21 LOG3 track_source: Calling 'track_source AGES3193_p2_018 210.41 5.8999240741 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Mar-08 22:59:21 START begin_task: Starting task 'sending tracking commands' 2009-Mar-08 22:59:21 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2009-Mar-08 22:59:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_018} INFO {Slewing to source 'AGES3193_p2_018' ...} 2009-Mar-08 22:59:21 INFO1 track_source: Starting to track AGES3193_p2_018 2009-Mar-08 22:59:21 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_018" 2009-Mar-08 22:59:21 LOG3 vw_send: To DATATAKING: set ra 210.41 2009-Mar-08 22:59:21 LOG3 vw_send: To DATATAKING: set dec 5.8999240741 2009-Mar-08 22:59:21 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-08 22:59:21 LOG3 vw_send: To DATATAKING: pnt tr 210.41 5.8999240741 -CF 2009-Mar-08 22:59:21 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Mar-08 22:59:21 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-08 22:59:21 LOG5 finish_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2009-Mar-08 22:59:21 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-08 22:59:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 22:59:21 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-08 22:59:21 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2009-Mar-08 22:59:21 LOG1 fixed_driftmap: Parameters: HA = -00:13:00.1 Start = 09:40:33.4 LST = 09:40:04.6 diff = 28.8 secs 2009-Mar-08 22:59:21 INFO2 fixed_driftmap: Waiting 26.8 seconds for RA 9:53:33 2009-Mar-08 22:59:21 INFO2 lstwait: Waiting for 26.7 secs from LST 09:40:05 to LST 09:40:31 ... 2009-Mar-08 22:59:21 LOG4 send_obs_status: To obs_status: <1> TASKTIME 26.706226676413337 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Mar-08 22:59:21 START begin_task: Starting task 'waiting on wait on LST' 2009-Mar-08 22:59:21 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2009-Mar-08 22:59:21 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_018" 2009-Mar-08 22:59:21 LOG4 got_cormsg: From DATATAKING: set ra 210.41 2009-Mar-08 22:59:21 LOG4 got_cormsg: From DATATAKING: set dec 5.8999240741 2009-Mar-08 22:59:21 LOG4 got_cormsg: From DATATAKING: vw% 210.41 2009-Mar-08 22:59:21 LOG4 got_cormsg: From DATATAKING: vw% 5.8999240741 2009-Mar-08 22:59:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:59:21 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-08 22:59:21 LOG4 got_cormsg: From DATATAKING: pnt tr 210.41 5.8999240741 -CF 2009-Mar-08 22:59:21 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Mar-08 22:59:21 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-08 22:59:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 22:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 22:59:48 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Mar-08 22:59:48 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2009-Mar-08 22:59:48 LOG4 lstwait: Finished waiting 0.30 seconds late 2009-Mar-08 22:59:48 INFO3 lstwait: Finished waiting 2009-Mar-08 22:59:48 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-08 22:59:48 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-Mar-08 22:59:48 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Mar-08 22:59:48 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-Mar-08 22:59:48 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Mar-08 22:59:48 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-Mar-08 22:59:48 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-08 22:59:48 LOG5 begin_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2009-Mar-08 22:59:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Mar-08 22:59:48 INFO2 take_data: Starting WAPP scan: 906700180 2009-Mar-08 22:59:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-Mar-08 22:59:48 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-08 22:59:48 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2009-Mar-08 22:59:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 22:59:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10789.00 2009-Mar-08 22:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.185375 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 22:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.185375 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.185375 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.185375 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.185375 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.185375 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 22:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.185375 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 22:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.185375 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 22:59:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.185375 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 22:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 22:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad) 2009-Mar-08 22:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.104 (still bad) 2009-Mar-08 22:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 22:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:00:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:00:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.011 0.929 1.099 1.076 2009-Mar-08 23:00:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.033 0.982 0.896 0.896 2009-Mar-08 23:00:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.914 0.978 1.086 1.057 2009-Mar-08 23:00:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.967 0.111 1.064 0.121 2009-Mar-08 23:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:00:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-08 23:00:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-08 23:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:01:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:01:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.009 0.928 1.096 1.071 2009-Mar-08 23:01:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.034 0.981 0.895 0.894 2009-Mar-08 23:01:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.909 0.973 1.084 1.032 2009-Mar-08 23:01:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.965 0.111 1.064 0.121 2009-Mar-08 23:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:02:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Mar-08 23:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:02:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:02:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.009 0.929 1.095 1.073 2009-Mar-08 23:02:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.047 0.991 0.898 0.899 2009-Mar-08 23:02:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.907 0.970 1.088 1.028 2009-Mar-08 23:02:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.963 0.111 1.063 0.121 2009-Mar-08 23:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:02:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-08 23:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:03:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:03:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.007 0.929 1.092 1.069 2009-Mar-08 23:03:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.033 0.977 0.894 0.897 2009-Mar-08 23:03:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.908 0.973 1.086 1.027 2009-Mar-08 23:03:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.963 0.111 1.061 0.121 2009-Mar-08 23:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-Mar-08 23:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-Mar-08 23:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:04:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:04:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 0.927 1.094 1.069 2009-Mar-08 23:04:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.034 0.980 0.895 0.898 2009-Mar-08 23:04:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.908 0.976 1.082 1.026 2009-Mar-08 23:04:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.962 0.111 1.061 0.121 2009-Mar-08 23:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:05:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:05:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.007 0.926 1.093 1.068 2009-Mar-08 23:05:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.031 0.980 0.898 0.896 2009-Mar-08 23:05:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.911 0.977 1.084 1.025 2009-Mar-08 23:05:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.961 0.111 1.058 0.120 2009-Mar-08 23:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-Mar-08 23:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-Mar-08 23:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:06:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:06:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.012 0.929 1.095 1.069 2009-Mar-08 23:06:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.981 0.896 0.896 2009-Mar-08 23:06:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.911 0.975 1.088 1.035 2009-Mar-08 23:06:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.959 0.111 1.058 0.120 2009-Mar-08 23:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-Mar-08 23:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.090 (still bad) 2009-Mar-08 23:06:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Mar-08 23:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-Mar-08 23:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:07:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:07:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.011 0.929 1.093 1.070 2009-Mar-08 23:07:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.034 0.984 0.902 0.904 2009-Mar-08 23:07:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.918 0.984 1.082 1.033 2009-Mar-08 23:07:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.962 0.111 1.058 0.120 2009-Mar-08 23:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:08:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:08:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.012 0.932 1.098 1.071 2009-Mar-08 23:08:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.034 0.984 0.895 0.894 2009-Mar-08 23:08:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.911 0.975 1.083 1.039 2009-Mar-08 23:08:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.967 0.111 1.065 0.120 2009-Mar-08 23:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.104 (still bad) 2009-Mar-08 23:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.104 (still bad) 2009-Mar-08 23:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2009-Mar-08 23:09:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:09:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.011 0.932 1.104 1.079 2009-Mar-08 23:09:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.034 0.984 0.897 0.895 2009-Mar-08 23:09:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.911 0.975 1.086 1.039 2009-Mar-08 23:09:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.963 0.111 1.061 0.121 2009-Mar-08 23:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2009-Mar-08 23:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.109 (still bad) 2009-Mar-08 23:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2009-Mar-08 23:10:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:10:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.015 0.932 1.125 1.100 2009-Mar-08 23:10:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.036 0.984 0.898 0.903 2009-Mar-08 23:10:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.910 0.977 1.087 1.053 2009-Mar-08 23:10:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.966 0.111 1.064 0.121 2009-Mar-08 23:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.130 (still bad) 2009-Mar-08 23:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.131 (still bad) 2009-Mar-08 23:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.128 (still bad) 2009-Mar-08 23:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-Mar-08 23:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-08 23:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-Mar-08 23:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad) 2009-Mar-08 23:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.099 (still bad) 2009-Mar-08 23:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.099 (still bad) 2009-Mar-08 23:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.099 (still bad) 2009-Mar-08 23:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.099 (still bad) 2009-Mar-08 23:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.098 (still bad) 2009-Mar-08 23:11:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-08 23:11:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.013 0.933 1.100 1.078 2009-Mar-08 23:11:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.037 0.985 0.898 0.907 2009-Mar-08 23:11:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.911 0.978 1.092 1.060 2009-Mar-08 23:11:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.966 0.112 1.064 0.122 2009-Mar-08 23:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.099 (still bad) 2009-Mar-08 23:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.104 (still bad) 2009-Mar-08 23:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.104 (still bad) 2009-Mar-08 23:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.105 (still bad) 2009-Mar-08 23:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.104 (still bad) 2009-Mar-08 23:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.104 (still bad) 2009-Mar-08 23:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.104 (still bad) 2009-Mar-08 23:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.104 (still bad) 2009-Mar-08 23:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.104 (still bad) 2009-Mar-08 23:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.104 (still bad) 2009-Mar-08 23:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.104 (still bad) 2009-Mar-08 23:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.104 (still bad) 2009-Mar-08 23:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.104 (still bad) 2009-Mar-08 23:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:12:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-08 23:12:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.033 0.948 1.101 1.082 2009-Mar-08 23:12:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.039 0.985 0.903 0.914 2009-Mar-08 23:12:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.910 0.979 1.090 1.063 2009-Mar-08 23:12:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.967 0.112 1.065 0.122 2009-Mar-08 23:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-08 23:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.104 (still bad) 2009-Mar-08 23:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.105 (still bad) 2009-Mar-08 23:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.107 (still bad) 2009-Mar-08 23:12:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-08 23:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.108 (still bad) 2009-Mar-08 23:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.107 (still bad) 2009-Mar-08 23:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.109 (still bad) 2009-Mar-08 23:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.108 (still bad) 2009-Mar-08 23:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.109 (still bad) 2009-Mar-08 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-08 23:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.108 (still bad) 2009-Mar-08 23:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.106 (still bad) 2009-Mar-08 23:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.106 (still bad) 2009-Mar-08 23:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.104 (still bad) 2009-Mar-08 23:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.104 (still bad) 2009-Mar-08 23:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:13:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-08 23:13:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.014 0.933 1.101 1.082 2009-Mar-08 23:13:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.039 0.989 0.900 0.911 2009-Mar-08 23:13:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.911 0.978 1.094 1.066 2009-Mar-08 23:13:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.968 0.112 1.067 0.122 2009-Mar-08 23:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.104 (still bad) 2009-Mar-08 23:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:13:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-08 23:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:13:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-08 23:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.104 (still bad) 2009-Mar-08 23:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.104 (still bad) 2009-Mar-08 23:14:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-08 23:14:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.018 0.938 1.103 1.081 2009-Mar-08 23:14:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.040 0.988 0.904 0.908 2009-Mar-08 23:14:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.914 0.982 1.093 1.055 2009-Mar-08 23:14:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.966 0.112 1.066 0.121 2009-Mar-08 23:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:14:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-08 23:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:15:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-08 23:15:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 0.932 1.099 1.078 2009-Mar-08 23:15:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.039 0.989 0.901 0.904 2009-Mar-08 23:15:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.918 0.983 1.095 1.045 2009-Mar-08 23:15:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.965 0.112 1.065 0.121 2009-Mar-08 23:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.099 (still bad) 2009-Mar-08 23:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:15:52 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 23:15:52.297 (seconds: 83752.297)!} 2009-Mar-08 23:15:52 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 23:15:52.297 (seconds: 83752.297)! 2009-Mar-08 23:15:53 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 83751.0 to 83752.0! 2009-Mar-08 23:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:15:54 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (83751.0 - 83753.0)! 2009-Mar-08 23:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.104 (still bad) 2009-Mar-08 23:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.099 (still bad) 2009-Mar-08 23:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.104 (still bad) 2009-Mar-08 23:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.104 (still bad) 2009-Mar-08 23:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:16:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:16:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.011 0.932 1.102 1.078 2009-Mar-08 23:16:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.990 0.899 0.901 2009-Mar-08 23:16:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.916 0.978 1.093 1.047 2009-Mar-08 23:16:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.963 0.111 1.063 0.121 2009-Mar-08 23:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.104 (still bad) 2009-Mar-08 23:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.104 (still bad) 2009-Mar-08 23:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.104 (still bad) 2009-Mar-08 23:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad) 2009-Mar-08 23:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad) 2009-Mar-08 23:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:17:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:17:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 0.934 1.101 1.077 2009-Mar-08 23:17:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.989 0.902 0.906 2009-Mar-08 23:17:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.916 0.983 1.091 1.040 2009-Mar-08 23:17:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.964 0.111 1.064 0.121 2009-Mar-08 23:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.104 (still bad) 2009-Mar-08 23:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad) 2009-Mar-08 23:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2009-Mar-08 23:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-Mar-08 23:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-Mar-08 23:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-Mar-08 23:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.109 (still bad) 2009-Mar-08 23:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad) 2009-Mar-08 23:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad) 2009-Mar-08 23:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.104 (still bad) 2009-Mar-08 23:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.104 (still bad) 2009-Mar-08 23:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:18:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:18:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 0.936 1.099 1.078 2009-Mar-08 23:18:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.050 0.998 0.903 0.906 2009-Mar-08 23:18:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.917 0.980 1.092 1.043 2009-Mar-08 23:18:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.966 0.111 1.066 0.121 2009-Mar-08 23:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad) 2009-Mar-08 23:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2009-Mar-08 23:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-Mar-08 23:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-Mar-08 23:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-Mar-08 23:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-08 23:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2009-Mar-08 23:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.104 (still bad) 2009-Mar-08 23:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-Mar-08 23:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-08 23:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2009-Mar-08 23:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.131 (still bad) 2009-Mar-08 23:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.144 (still bad) 2009-Mar-08 23:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.153 (still bad) 2009-Mar-08 23:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.159 (still bad) 2009-Mar-08 23:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.161 (still bad) 2009-Mar-08 23:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.157 (still bad) 2009-Mar-08 23:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.147 (still bad) 2009-Mar-08 23:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.136 (still bad) 2009-Mar-08 23:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-08 23:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.114 (still bad) 2009-Mar-08 23:19:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-08 23:19:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.015 0.938 1.105 1.081 2009-Mar-08 23:19:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.045 0.991 0.902 0.905 2009-Mar-08 23:19:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.925 0.991 1.094 1.045 2009-Mar-08 23:19:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.968 0.112 1.069 0.121 2009-Mar-08 23:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.103 (still bad) 2009-Mar-08 23:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.105 (still bad) 2009-Mar-08 23:19:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 23:19:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-08 23:19:49 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2009-Mar-08 23:19:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-08 23:19:49 LOG5 end_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2009-Mar-08 23:19:49 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Mar-08 23:19:49 LOG5 finish_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2009-Mar-08 23:19:49 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-Mar-08 23:19:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-08 23:19:49 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-Mar-08 23:19:49 LOG5 end_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2009-Mar-08 23:19:49 COMMAND run_command_line: EXECUTING command 12: 'ENDIF' 2009-Mar-08 23:19:49 COMMAND run_command_line: EXECUTING command 15: 'IF LSTSLEW(AGES3193_p2_026) < 100633 THEN' 2009-Mar-08 23:19:50 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_026) < 100633 2009-Mar-08 23:19:50 INFO5 is_if_valid: Condition parsed as: 10.043599333333333 < 10.109166666666667 2009-Mar-08 23:19:50 COMMAND run_command_line: EXECUTING command 16: 'FIXEDDRIFT az=148.54 alfaangle=47.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_026 ra=95300.00 dec=231530.00' 2009-Mar-08 23:19:50 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-Mar-08 23:19:50 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-08 23:19:50 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 148.54 47.9 hcorcal 5 tracking no first 1 AGES3193_p2_026 95300.00 231530.00 J 8500.0 Heliocentric velocity(optical)' 2009-Mar-08 23:19:50 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Mar-08 23:19:50 LOG5 begin_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2009-Mar-08 23:19:50 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_018' 2009-Mar-08 23:19:50 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Mar-08 23:19:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_026} 2009-Mar-08 23:19:50 INFO3 fixed_driftmap: Sending telescope to Az = 148.54 and ZA = 5.73 2009-Mar-08 23:19:50 LOG3 track_source: Calling 'track_source AGES3193_p2_026 148.54 5.7305497756 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Mar-08 23:19:50 START begin_task: Starting task 'sending tracking commands' 2009-Mar-08 23:19:50 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2009-Mar-08 23:19:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_026} INFO {Slewing to source 'AGES3193_p2_026' ...} 2009-Mar-08 23:19:50 INFO1 track_source: Starting to track AGES3193_p2_026 2009-Mar-08 23:19:50 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_026" 2009-Mar-08 23:19:50 LOG3 vw_send: To DATATAKING: set ra 148.54 2009-Mar-08 23:19:50 LOG3 vw_send: To DATATAKING: set dec 5.7305497756 2009-Mar-08 23:19:50 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-08 23:19:50 LOG3 vw_send: To DATATAKING: pnt tr 148.54 5.7305497756 -CF 2009-Mar-08 23:19:50 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Mar-08 23:19:50 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-08 23:19:50 LOG5 finish_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2009-Mar-08 23:19:50 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-08 23:19:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 23:19:50 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-08 23:19:50 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2009-Mar-08 23:19:50 START begin_task: Starting task 'rotate ALFA to +47.9 degrees' 2009-Mar-08 23:19:50 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2009-Mar-08 23:19:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +47.9 degrees ...} 2009-Mar-08 23:19:50 INFO2 rotate_alfa: ALFA commanded to +47.9 degrees 2009-Mar-08 23:19:50 LOG3 sock_errsend: To ALFAMOTOR: POSITION 47.9 REPLY 2009-Mar-08 23:19:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Mar-08 23:19:50 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Mar-08 23:19:50 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2009-Mar-08 23:19:50 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_026" 2009-Mar-08 23:19:50 LOG4 got_cormsg: From DATATAKING: set ra 148.54 2009-Mar-08 23:19:50 LOG4 got_cormsg: From DATATAKING: set dec 5.7305497756 2009-Mar-08 23:19:50 LOG4 got_cormsg: From DATATAKING: vw% 148.54 2009-Mar-08 23:19:50 LOG4 got_cormsg: From DATATAKING: vw% 5.7305497756 2009-Mar-08 23:19:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:19:50 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-08 23:19:50 LOG4 got_cormsg: From DATATAKING: pnt tr 148.54 5.7305497756 -CF 2009-Mar-08 23:19:50 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Mar-08 23:19:50 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-08 23:19:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:20:23 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Mar-08 23:20:23 INFO3 alfa_motor: ALFA rotator in-position +47.90 degrees 2009-Mar-08 23:20:23 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Mar-08 23:20:23 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2009-Mar-08 23:20:23 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-08 23:20:23 STOP finish_task: Finishing task 'rotate ALFA to +47.9 degrees' 2009-Mar-08 23:20:23 LOG5 finish_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2009-Mar-08 23:20:23 INFO2 finish_task: DONE finished configuration: rotating ALFA to +47.9 degrees 2009-Mar-08 23:20:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 23:20:23 STOP end_task: Finishing task 'rotate ALFA to +47.9 degrees' with status 'OK' 2009-Mar-08 23:20:23 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2009-Mar-08 23:20:23 START begin_task: Starting task 'waiting on telescope' 2009-Mar-08 23:20:23 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Mar-08 23:20:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Mar-08 23:20:23 LOG3 waittrk: Start waittrk 5 2009-Mar-08 23:20:23 START begin_task: Starting task 'waiting on telescope movement' 2009-Mar-08 23:20:23 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2009-Mar-08 23:20:28 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Mar-08 23:20:28 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2009-Mar-08 23:20:28 START begin_task: Starting task 'waiting on telescope on source' 2009-Mar-08 23:20:28 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2009-Mar-08 23:22:30 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Mar-08 23:22:30 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2009-Mar-08 23:22:30 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-08 23:22:30 INFO2 waittrk: Now tracking AGES3193_p2_026 2009-Mar-08 23:22:30 LOG4 waittrk: Current telescope position: Az = 148.31 ZA = 5.74 2009-Mar-08 23:22:30 STOP finish_task: Finishing task 'waiting on telescope' 2009-Mar-08 23:22:30 LOG5 finish_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Mar-08 23:22:30 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Mar-08 23:22:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 23:22:31 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Mar-08 23:22:31 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Mar-08 23:22:31 START begin_task: Starting task 'selecting calibration type' 2009-Mar-08 23:22:31 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2009-Mar-08 23:22:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-08 23:22:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-08 23:22:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 23:22:31 START begin_task: Starting task 'waiting on setcal' 2009-Mar-08 23:22:31 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2009-Mar-08 23:22:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-08 23:22:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 23:22:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:22:32 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-08 23:22:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-08 23:22:32 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2009-Mar-08 23:22:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-08 23:22:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-08 23:22:32 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-08 23:22:32 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-08 23:22:32 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2009-Mar-08 23:22:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:22:32 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-08 23:22:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-08 23:22:32 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2009-Mar-08 23:22:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-08 23:22:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-08 23:22:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-08 23:22:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-08 23:22:32 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-08 23:22:32 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2009-Mar-08 23:22:32 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-08 23:22:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-08 23:22:32 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2009-Mar-08 23:22:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-08 23:22:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-08 23:22:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-08 23:22:32 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2009-Mar-08 23:22:32 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-Mar-08 23:22:32 INFO2 astwait: Waiting for 133 seconds from 03:22:32 to 03:24:45 UTC ... 2009-Mar-08 23:22:32 LOG4 send_obs_status: To obs_status: <1> TASKTIME 133 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Mar-08 23:22:32 START begin_task: Starting task 'waiting on waiting for AST time' 2009-Mar-08 23:22:32 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2009-Mar-08 23:24:45 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-Mar-08 23:24:45 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2009-Mar-08 23:24:45 INFO3 astwait: Finished waiting 2009-Mar-08 23:24:45 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-08 23:24:45 LOG5 dopset_later: Calling 'dopset_later 60.636119613981016' 2009-Mar-08 23:24:45 INFO3 dopset_later: Setting Doppler correction for 23:25:45 (60.6 seconds from now) 2009-Mar-08 23:24:45 LOG5 antvel: Calling 'antvel 148.540000 5.730550 F 60.636119613981016' 2009-Mar-08 23:24:45 LOG2 antvel: Transforming current Az = 148.54 ZA = 5.73 to apparent RA = 09:53:33.3 Dec = +23:12:46.8 2009-Mar-08 23:24:45 LOG2 antvel: Parameters to Doppler: Heliocentric 98745 2009 67 0.0 2009-Mar-08 23:24:45 INFO5 antvel: Computed antenna velocity: +12.62961 km/s 2009-Mar-08 23:24:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=12.6296137606 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-Mar-08 23:24:45 INFO4 dopset_gen: New sky frequencies: 1381.185242 1381.185242 1381.185242 1381.185242 1381.185242 1381.185242 1381.185242 1381.185242 1381.185242 2009-Mar-08 23:24:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.185242 sky0=1381.185242 sky1=1381.185242 sky2=1381.185242 sky3=1381.185242 sky4=1381.185242 sky5=1381.185242 sky6=1381.185242 sky7=1381.185242 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 23:24:45 LOG2 dopset_gen: Result from 'sky2syn': 1631.185242 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 23:24:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631185242.0} 2009-Mar-08 23:24:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 23:24:45 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-Mar-08 23:24:45 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-Mar-08 23:24:45 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:04.6 Dec = +23:15:23.1 2009-Mar-08 23:24:45 LOG3 track_source: Calling 'track_source AGES3193_p2_026 095204.6 231523.1 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Mar-08 23:24:45 START begin_task: Starting task 'sending tracking commands' 2009-Mar-08 23:24:45 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2009-Mar-08 23:24:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_026} INFO {Slewing to source 'AGES3193_p2_026' ...} 2009-Mar-08 23:24:45 INFO1 track_source: Starting to track AGES3193_p2_026 2009-Mar-08 23:24:45 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_026" 2009-Mar-08 23:24:45 LOG3 vw_send: To DATATAKING: set ra 095204.6 2009-Mar-08 23:24:45 LOG3 vw_send: To DATATAKING: set dec 231523.1 2009-Mar-08 23:24:45 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-08 23:24:45 LOG3 vw_send: To DATATAKING: pnt tr 095204.6 231523.1 -CJ 2009-Mar-08 23:24:45 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Mar-08 23:24:45 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-08 23:24:45 LOG5 finish_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2009-Mar-08 23:24:45 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-08 23:24:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 23:24:45 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-08 23:24:45 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2009-Mar-08 23:24:45 START begin_task: Starting task 'waiting on telescope' 2009-Mar-08 23:24:45 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2009-Mar-08 23:24:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Mar-08 23:24:45 LOG3 waittrk: Start waittrk 5 2009-Mar-08 23:24:45 START begin_task: Starting task 'waiting on telescope movement' 2009-Mar-08 23:24:45 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2009-Mar-08 23:24:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631185242.0} 2009-Mar-08 23:24:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 23:24:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:24:45 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_026" 2009-Mar-08 23:24:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:24:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:24:45 LOG4 got_cormsg: From DATATAKING: set ra 095204.6 2009-Mar-08 23:24:45 LOG4 got_cormsg: From DATATAKING: set dec 231523.1 2009-Mar-08 23:24:45 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-08 23:24:45 LOG4 got_cormsg: From DATATAKING: pnt tr 095204.6 231523.1 -CJ 2009-Mar-08 23:24:45 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Mar-08 23:24:45 LOG4 got_cormsg: From DATATAKING: 095204.6 2009-Mar-08 23:24:45 LOG4 got_cormsg: From DATATAKING: vw% 231523.1 2009-Mar-08 23:24:45 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2009-Mar-08 23:24:50 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Mar-08 23:24:50 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2009-Mar-08 23:24:50 START begin_task: Starting task 'waiting on telescope on source' 2009-Mar-08 23:24:50 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2009-Mar-08 23:24:52 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Mar-08 23:24:52 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2009-Mar-08 23:24:52 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-08 23:24:52 INFO2 waittrk: Now tracking AGES3193_p2_026 2009-Mar-08 23:24:52 LOG4 waittrk: Current telescope position: Az = 148.19 ZA = 5.75 2009-Mar-08 23:24:52 STOP finish_task: Finishing task 'waiting on telescope' 2009-Mar-08 23:24:52 LOG5 finish_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2009-Mar-08 23:24:52 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Mar-08 23:24:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 23:24:52 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Mar-08 23:24:52 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2009-Mar-08 23:24:52 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-08 23:24:52 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2009-Mar-08 23:24:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Mar-08 23:24:52 INFO2 adjust_power: Starting to adjust WAPP power 2009-Mar-08 23:24:52 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Mar-08 23:24:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Mar-08 23:24:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 23:24:52 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Mar-08 23:24:52 LOG5 begin_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2009-Mar-08 23:24:53 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Mar-08 23:24:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 23:24:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:24:55 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-08 23:24:55 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Mar-08 23:24:55 LOG5 end_task: Level: (4) ID = <10178> Status = 0 0 0 0 ok 2009-Mar-08 23:24:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Mar-08 23:24:55 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-08 23:24:55 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2009-Mar-08 23:24:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Mar-08 23:24:55 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-08 23:24:55 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-08 23:24:55 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-08 23:24:56 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-08 23:24:56 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Mar-08 23:24:56 LOG5 begin_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2009-Mar-08 23:24:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Mar-08 23:24:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:24:56 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Mar-08 23:24:56 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 3 dB 2009-Mar-08 23:24:56 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2009-Mar-08 23:24:56 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Mar-08 23:24:56 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Mar-08 23:24:56 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Mar-08 23:24:56 LOG5 end_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2009-Mar-08 23:24:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.988 0.947 ALFA beam 1: 1.091 1.095 2009-Mar-08 23:24:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.047 0.994 ALFA beam 3: 0.903 0.901 2009-Mar-08 23:24:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.912 0.988 ALFA beam 5: 1.070 1.057 2009-Mar-08 23:24:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.931 0.111 ALFA beam 7: 1.028 0.121 2009-Mar-08 23:24:56 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-08 23:24:56 LOG5 finish_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2009-Mar-08 23:24:56 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Mar-08 23:24:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 23:24:56 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-08 23:24:56 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2009-Mar-08 23:24:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Mar-08 23:24:56 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-08 23:24:56 LOG5 finish_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2009-Mar-08 23:24:56 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Mar-08 23:24:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 23:24:56 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-08 23:24:56 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2009-Mar-08 23:24:56 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2009-Mar-08 23:24:56 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2009-Mar-08 23:24:56 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2009-Mar-08 23:24:56 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2009-Mar-08 23:24:56 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-Mar-08 23:24:56 START begin_task: Starting task 'WAPP calibration' 2009-Mar-08 23:24:56 LOG5 begin_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2009-Mar-08 23:24:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Mar-08 23:24:56 START begin_task: Starting task 'selecting calibration type' 2009-Mar-08 23:24:56 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2009-Mar-08 23:24:56 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-08 23:24:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-08 23:24:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 23:24:56 START begin_task: Starting task 'waiting on setcal' 2009-Mar-08 23:24:56 LOG5 begin_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2009-Mar-08 23:24:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Mar-08 23:24:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-08 23:24:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 23:24:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:24:57 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-08 23:24:57 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-08 23:24:57 LOG5 end_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2009-Mar-08 23:24:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-08 23:24:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-08 23:24:57 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-08 23:24:57 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-08 23:24:57 LOG5 begin_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2009-Mar-08 23:24:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:24:57 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-08 23:24:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-08 23:24:57 LOG5 end_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2009-Mar-08 23:24:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-08 23:24:57 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-08 23:24:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-08 23:24:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-08 23:24:57 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-08 23:24:57 LOG5 begin_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2009-Mar-08 23:24:57 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-08 23:24:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-08 23:24:57 LOG5 end_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2009-Mar-08 23:24:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-08 23:24:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-08 23:24:57 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-08 23:24:57 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2009-Mar-08 23:24:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Mar-08 23:24:57 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Mar-08 23:24:57 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Mar-08 23:24:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-08 23:24:57 LOG5 begin_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2009-Mar-08 23:24:57 NOTE WAPPDATA-new_file: New FITS file: wapp.20090308.a2048.0002.fits 2009-Mar-08 23:24:57 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090308.a2048.0002.fits} 2009-Mar-08 23:24:57 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-08 23:24:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Mar-08 23:24:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-08 23:24:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-08 23:24:57 LOG5 end_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2009-Mar-08 23:24:57 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-Mar-08 23:24:57 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-Mar-08 23:24:57 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-08 23:24:57 LOG5 begin_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2009-Mar-08 23:24:57 LOG5 log_alfabeam: Parameters: 9.8679444444444471 23.256416666666667 10.096056 2009.1861072134764 47.899895 2009-Mar-08 23:24:57 LOG4 log_alfabeam: ALFABEAM 0 9.867944444444454 23.256416666666670 2009-Mar-08 23:24:57 LOG4 log_alfabeam: ALFABEAM 1 9.870274956271423 23.156185369927918 2009-Mar-08 23:24:57 LOG4 log_alfabeam: ALFABEAM 2 9.874760566299354 23.222625713762799 2009-Mar-08 23:24:57 LOG4 log_alfabeam: ALFABEAM 3 9.872551945524888 23.323414964434409 2009-Mar-08 23:24:57 LOG4 log_alfabeam: ALFABEAM 4 9.865676027799919 23.357063712885626 2009-Mar-08 23:24:57 LOG4 log_alfabeam: ALFABEAM 5 9.861048318546569 23.288679752120558 2009-Mar-08 23:24:57 LOG4 log_alfabeam: ALFABEAM 6 9.863438382682975 23.188604703401527 2009-Mar-08 23:24:57 INFO2 take_data: Starting WAPP scan: 906700181 2009-Mar-08 23:24:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Mar-08 23:24:58 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-08 23:24:58 LOG5 begin_task: Level: (5) ID = <10188> Status = 0 0 0 0 ok 2009-Mar-08 23:24:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 23:24:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:24:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.988 0.947 1.091 1.095 2009-Mar-08 23:24:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.047 0.994 0.903 0.901 2009-Mar-08 23:24:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.912 0.988 1.070 1.057 2009-Mar-08 23:24:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.111 1.028 0.121 2009-Mar-08 23:24:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12299.00 2009-Mar-08 23:25:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.185242 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 23:25:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.185242 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 23:25:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.185242 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 23:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.516 (still bad) 2009-Mar-08 23:25:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.185242 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 23:25:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.185242 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 23:25:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.185242 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 23:25:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.185242 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 23:25:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.185242 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 23:25:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.185242 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 23:25:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 23:25:04 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-08 23:25:04 LOG5 end_task: Level: (5) ID = <10188> Status = 0 0 0 0 ok 2009-Mar-08 23:25:04 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-08 23:25:04 LOG5 end_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2009-Mar-08 23:25:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Mar-08 23:25:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-08 23:25:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-08 23:25:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-08 23:25:04 LOG5 begin_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2009-Mar-08 23:25:05 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-08 23:25:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-08 23:25:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-08 23:25:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-08 23:25:05 LOG5 end_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2009-Mar-08 23:25:05 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-Mar-08 23:25:05 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-Mar-08 23:25:05 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-08 23:25:05 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2009-Mar-08 23:25:05 LOG5 log_alfabeam: Parameters: 9.8679444444444471 23.256416666666667 10.098005 2009.1861074352928 47.899895 2009-Mar-08 23:25:05 LOG4 log_alfabeam: ALFABEAM 0 9.867944444444454 23.256416666666656 2009-Mar-08 23:25:05 LOG4 log_alfabeam: ALFABEAM 1 9.870304635575474 23.156317269537098 2009-Mar-08 23:25:05 LOG4 log_alfabeam: ALFABEAM 2 9.874770662874784 23.223012780892109 2009-Mar-08 23:25:05 LOG4 log_alfabeam: ALFABEAM 3 9.872531855798350 23.323675618632670 2009-Mar-08 23:25:05 LOG4 log_alfabeam: ALFABEAM 4 9.865646014180514 23.356934222273789 2009-Mar-08 23:25:05 LOG4 log_alfabeam: ALFABEAM 5 9.861038887055702 23.288291930790198 2009-Mar-08 23:25:05 LOG4 log_alfabeam: ALFABEAM 6 9.863458453462311 23.188351777336095 2009-Mar-08 23:25:05 INFO2 take_data: Starting WAPP scan: 906700182 2009-Mar-08 23:25:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Mar-08 23:25:05 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-08 23:25:05 LOG5 begin_task: Level: (5) ID = <10191> Status = 0 0 0 0 ok 2009-Mar-08 23:25:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 23:25:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12306.00 2009-Mar-08 23:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.516 (still bad) 2009-Mar-08 23:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.185242 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 23:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.185242 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 23:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.185242 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 23:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.185242 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 23:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.185242 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 23:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.185242 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 23:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.185242 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 23:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.185242 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 23:25:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.185242 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 23:25:11 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-Mar-08 23:25:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 23:25:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-08 23:25:11 LOG5 end_task: Level: (5) ID = <10191> Status = 0 0 0 0 ok 2009-Mar-08 23:25:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-08 23:25:11 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2009-Mar-08 23:25:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Mar-08 23:25:11 STOP finish_task: Finishing task 'WAPP calibration' 2009-Mar-08 23:25:11 LOG5 finish_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2009-Mar-08 23:25:11 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Mar-08 23:25:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 23:25:11 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Mar-08 23:25:11 LOG5 end_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2009-Mar-08 23:25:12 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-Mar-08 23:25:12 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 148.54 and ZA = 5.73 2009-Mar-08 23:25:12 LOG3 track_source: Calling 'track_source AGES3193_p2_026 148.54 5.7305497756 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Mar-08 23:25:12 START begin_task: Starting task 'sending tracking commands' 2009-Mar-08 23:25:12 LOG5 begin_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2009-Mar-08 23:25:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_026} INFO {Slewing to source 'AGES3193_p2_026' ...} 2009-Mar-08 23:25:12 INFO1 track_source: Starting to track AGES3193_p2_026 2009-Mar-08 23:25:12 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_026" 2009-Mar-08 23:25:12 LOG3 vw_send: To DATATAKING: set ra 148.54 2009-Mar-08 23:25:12 LOG3 vw_send: To DATATAKING: set dec 5.7305497756 2009-Mar-08 23:25:12 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-08 23:25:12 LOG3 vw_send: To DATATAKING: pnt tr 148.54 5.7305497756 -CF 2009-Mar-08 23:25:12 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Mar-08 23:25:12 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-08 23:25:12 LOG5 finish_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2009-Mar-08 23:25:12 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-08 23:25:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 23:25:12 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-08 23:25:12 LOG5 end_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2009-Mar-08 23:25:12 LOG1 fixed_driftmap: Parameters: HA = +00:13:00.1 Start = 10:06:33.6 LST = 10:05:59.8 diff = 33.7 secs 2009-Mar-08 23:25:12 INFO2 fixed_driftmap: Waiting 31.7 seconds for RA 9:53:33 2009-Mar-08 23:25:12 INFO2 lstwait: Waiting for 31.6 secs from LST 10:06:00 to LST 10:06:32 ... 2009-Mar-08 23:25:12 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.643497802782406 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Mar-08 23:25:12 START begin_task: Starting task 'waiting on wait on LST' 2009-Mar-08 23:25:12 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2009-Mar-08 23:25:12 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_026" 2009-Mar-08 23:25:12 LOG4 got_cormsg: From DATATAKING: set ra 148.54 2009-Mar-08 23:25:12 LOG4 got_cormsg: From DATATAKING: set dec 5.7305497756 2009-Mar-08 23:25:12 LOG4 got_cormsg: From DATATAKING: vw% 148.54 2009-Mar-08 23:25:12 LOG4 got_cormsg: From DATATAKING: vw% 5.7305497756 2009-Mar-08 23:25:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:25:12 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-08 23:25:12 LOG4 got_cormsg: From DATATAKING: pnt tr 148.54 5.7305497756 -CF 2009-Mar-08 23:25:12 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Mar-08 23:25:12 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-08 23:25:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.096 (still bad) 2009-Mar-08 23:25:44 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Mar-08 23:25:44 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2009-Mar-08 23:25:44 LOG4 lstwait: Finished waiting 0.36 seconds late 2009-Mar-08 23:25:44 INFO3 lstwait: Finished waiting 2009-Mar-08 23:25:44 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-08 23:25:44 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-Mar-08 23:25:44 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Mar-08 23:25:44 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-Mar-08 23:25:44 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Mar-08 23:25:44 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-Mar-08 23:25:44 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-08 23:25:44 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2009-Mar-08 23:25:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Mar-08 23:25:44 INFO2 take_data: Starting WAPP scan: 906700183 2009-Mar-08 23:25:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-Mar-08 23:25:44 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-08 23:25:44 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2009-Mar-08 23:25:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 23:25:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12345.00 2009-Mar-08 23:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.185242 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 23:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.185242 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 23:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.185242 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 23:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.185242 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 23:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.185242 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 23:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.185242 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 23:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.185242 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 23:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.185242 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 23:25:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.185242 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 23:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.097 (still bad) 2009-Mar-08 23:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.097 (still bad) 2009-Mar-08 23:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.097 (still bad) 2009-Mar-08 23:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:26:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:26:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.988 0.945 1.090 1.096 2009-Mar-08 23:26:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.045 0.990 0.900 0.899 2009-Mar-08 23:26:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.912 0.989 1.073 1.061 2009-Mar-08 23:26:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.111 1.025 0.121 2009-Mar-08 23:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.097 (still bad) 2009-Mar-08 23:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.097 (still bad) 2009-Mar-08 23:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.097 (still bad) 2009-Mar-08 23:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.104 (still bad) 2009-Mar-08 23:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2009-Mar-08 23:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2009-Mar-08 23:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2009-Mar-08 23:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:27:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:27:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.990 0.944 1.092 1.098 2009-Mar-08 23:27:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.045 0.989 0.902 0.900 2009-Mar-08 23:27:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.909 0.986 1.071 1.060 2009-Mar-08 23:27:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.111 1.028 0.121 2009-Mar-08 23:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.095 (still bad) 2009-Mar-08 23:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:28:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:28:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.991 0.947 1.087 1.097 2009-Mar-08 23:28:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 0.985 0.906 0.903 2009-Mar-08 23:28:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.909 0.986 1.073 1.060 2009-Mar-08 23:28:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.111 1.027 0.121 2009-Mar-08 23:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:28:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-08 23:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:29:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:29:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.990 0.945 1.091 1.097 2009-Mar-08 23:29:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.985 0.900 0.898 2009-Mar-08 23:29:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.909 0.983 1.072 1.056 2009-Mar-08 23:29:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.111 1.026 0.121 2009-Mar-08 23:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:29:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-08 23:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:30:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:30:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.992 0.943 1.086 1.094 2009-Mar-08 23:30:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.985 0.901 0.897 2009-Mar-08 23:30:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.908 0.984 1.071 1.055 2009-Mar-08 23:30:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.111 1.031 0.121 2009-Mar-08 23:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-Mar-08 23:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-Mar-08 23:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:31:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:31:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.991 0.942 1.089 1.094 2009-Mar-08 23:31:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 0.986 0.901 0.896 2009-Mar-08 23:31:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.907 0.985 1.079 1.056 2009-Mar-08 23:31:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.111 1.028 0.121 2009-Mar-08 23:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:32:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:32:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.991 0.940 1.089 1.093 2009-Mar-08 23:32:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 0.988 0.899 0.898 2009-Mar-08 23:32:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.912 0.987 1.069 1.051 2009-Mar-08 23:32:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.111 1.026 0.121 2009-Mar-08 23:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-Mar-08 23:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:33:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:33:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.987 0.940 1.087 1.095 2009-Mar-08 23:33:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.044 0.990 0.899 0.901 2009-Mar-08 23:33:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.913 0.989 1.069 1.054 2009-Mar-08 23:33:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.111 1.026 0.121 2009-Mar-08 23:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.090 (still bad) 2009-Mar-08 23:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:34:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:34:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.987 0.940 1.087 1.095 2009-Mar-08 23:34:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.045 0.991 0.901 0.902 2009-Mar-08 23:34:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.917 0.992 1.071 1.057 2009-Mar-08 23:34:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.111 1.025 0.121 2009-Mar-08 23:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-Mar-08 23:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-Mar-08 23:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:35:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:35:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.991 0.940 1.087 1.097 2009-Mar-08 23:35:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 0.990 0.901 0.906 2009-Mar-08 23:35:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.916 0.994 1.070 1.063 2009-Mar-08 23:35:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.111 1.023 0.121 2009-Mar-08 23:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.095 (still bad) 2009-Mar-08 23:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.096 (still bad) 2009-Mar-08 23:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.095 (still bad) 2009-Mar-08 23:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.095 (still bad) 2009-Mar-08 23:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.098 (still bad) 2009-Mar-08 23:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.099 (still bad) 2009-Mar-08 23:36:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:36:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.000 0.947 1.094 1.098 2009-Mar-08 23:36:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.043 0.990 0.910 0.921 2009-Mar-08 23:36:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.917 0.992 1.072 1.067 2009-Mar-08 23:36:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.111 1.025 0.121 2009-Mar-08 23:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.097 (still bad) 2009-Mar-08 23:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.096 (still bad) 2009-Mar-08 23:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.095 (still bad) 2009-Mar-08 23:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.097 (still bad) 2009-Mar-08 23:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.098 (still bad) 2009-Mar-08 23:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.096 (still bad) 2009-Mar-08 23:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.098 (still bad) 2009-Mar-08 23:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.095 (still bad) 2009-Mar-08 23:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.095 (still bad) 2009-Mar-08 23:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.096 (still bad) 2009-Mar-08 23:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.097 (still bad) 2009-Mar-08 23:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.095 (still bad) 2009-Mar-08 23:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.095 (still bad) 2009-Mar-08 23:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.097 (still bad) 2009-Mar-08 23:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.094 (still bad) 2009-Mar-08 23:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.095 (still bad) 2009-Mar-08 23:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.096 (still bad) 2009-Mar-08 23:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.096 (still bad) 2009-Mar-08 23:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.096 (still bad) 2009-Mar-08 23:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.097 (still bad) 2009-Mar-08 23:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.095 (still bad) 2009-Mar-08 23:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.098 (still bad) 2009-Mar-08 23:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.095 (still bad) 2009-Mar-08 23:37:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-08 23:37:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 0.943 1.089 1.096 2009-Mar-08 23:37:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.049 0.996 0.901 0.912 2009-Mar-08 23:37:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.915 0.990 1.073 1.068 2009-Mar-08 23:37:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.112 1.025 0.122 2009-Mar-08 23:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.096 (still bad) 2009-Mar-08 23:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.096 (still bad) 2009-Mar-08 23:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.097 (still bad) 2009-Mar-08 23:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.099 (still bad) 2009-Mar-08 23:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.098 (still bad) 2009-Mar-08 23:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.097 (still bad) 2009-Mar-08 23:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.098 (still bad) 2009-Mar-08 23:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.098 (still bad) 2009-Mar-08 23:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.096 (still bad) 2009-Mar-08 23:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.097 (still bad) 2009-Mar-08 23:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.097 (still bad) 2009-Mar-08 23:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.097 (still bad) 2009-Mar-08 23:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.098 (still bad) 2009-Mar-08 23:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.101 (still bad) 2009-Mar-08 23:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.096 (still bad) 2009-Mar-08 23:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.097 (still bad) 2009-Mar-08 23:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.098 (still bad) 2009-Mar-08 23:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.099 (still bad) 2009-Mar-08 23:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.097 (still bad) 2009-Mar-08 23:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.098 (still bad) 2009-Mar-08 23:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.098 (still bad) 2009-Mar-08 23:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.098 (still bad) 2009-Mar-08 23:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.098 (still bad) 2009-Mar-08 23:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.099 (still bad) 2009-Mar-08 23:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.098 (still bad) 2009-Mar-08 23:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.096 (still bad) 2009-Mar-08 23:38:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-08 23:38:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 0.943 1.089 1.098 2009-Mar-08 23:38:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.051 0.998 0.901 0.912 2009-Mar-08 23:38:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.915 0.988 1.079 1.083 2009-Mar-08 23:38:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.112 1.028 0.121 2009-Mar-08 23:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.102 (still bad) 2009-Mar-08 23:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.099 (still bad) 2009-Mar-08 23:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.099 (still bad) 2009-Mar-08 23:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.097 (still bad) 2009-Mar-08 23:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.097 (still bad) 2009-Mar-08 23:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.104 (still bad) 2009-Mar-08 23:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.106 (still bad) 2009-Mar-08 23:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad) 2009-Mar-08 23:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.105 (still bad) 2009-Mar-08 23:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.099 (still bad) 2009-Mar-08 23:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.098 (still bad) 2009-Mar-08 23:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.100 (still bad) 2009-Mar-08 23:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.099 (still bad) 2009-Mar-08 23:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.096 (still bad) 2009-Mar-08 23:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.097 (still bad) 2009-Mar-08 23:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.096 (still bad) 2009-Mar-08 23:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:39:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:39:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.003 0.949 1.090 1.098 2009-Mar-08 23:39:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.047 0.993 0.901 0.909 2009-Mar-08 23:39:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.913 0.986 1.075 1.075 2009-Mar-08 23:39:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.111 1.040 0.121 2009-Mar-08 23:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:40:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:40:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 0.943 1.087 1.099 2009-Mar-08 23:40:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.042 0.986 0.900 0.906 2009-Mar-08 23:40:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.912 0.983 1.072 1.072 2009-Mar-08 23:40:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.111 1.024 0.121 2009-Mar-08 23:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:41:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:41:19 LOG4 check_wapp_levels: WAPP-1 power levels: 0.996 0.939 1.089 1.096 2009-Mar-08 23:41:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.039 0.985 0.898 0.901 2009-Mar-08 23:41:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.909 0.984 1.071 1.067 2009-Mar-08 23:41:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.111 1.024 0.121 2009-Mar-08 23:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.102 (still bad) 2009-Mar-08 23:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.106 (still bad) 2009-Mar-08 23:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-Mar-08 23:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2009-Mar-08 23:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2009-Mar-08 23:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad) 2009-Mar-08 23:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.101 (still bad) 2009-Mar-08 23:42:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:42:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.998 0.938 1.091 1.099 2009-Mar-08 23:42:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.985 0.899 0.900 2009-Mar-08 23:42:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.909 0.985 1.071 1.060 2009-Mar-08 23:42:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.111 1.026 0.121 2009-Mar-08 23:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.096 (still bad) 2009-Mar-08 23:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:43:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:43:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.996 0.937 1.087 1.091 2009-Mar-08 23:43:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.039 0.985 0.899 0.901 2009-Mar-08 23:43:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.909 0.982 1.071 1.083 2009-Mar-08 23:43:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.111 1.025 0.120 2009-Mar-08 23:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.090 (still bad) 2009-Mar-08 23:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-Mar-08 23:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-Mar-08 23:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-Mar-08 23:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-Mar-08 23:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-Mar-08 23:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.089 (still bad) 2009-Mar-08 23:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.090 (still bad) 2009-Mar-08 23:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-Mar-08 23:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:44:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:44:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.998 0.938 1.089 1.093 2009-Mar-08 23:44:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.051 0.995 0.904 0.904 2009-Mar-08 23:44:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.909 0.985 1.070 1.086 2009-Mar-08 23:44:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.111 1.023 0.120 2009-Mar-08 23:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.091 (still bad) 2009-Mar-08 23:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.090 (still bad) 2009-Mar-08 23:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.100 (still bad) 2009-Mar-08 23:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-Mar-08 23:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.108 (still bad) 2009-Mar-08 23:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.107 (still bad) 2009-Mar-08 23:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.105 (still bad) 2009-Mar-08 23:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.103 (still bad) 2009-Mar-08 23:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.092 (still bad) 2009-Mar-08 23:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:45:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:45:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.022 0.963 1.091 1.096 2009-Mar-08 23:45:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.041 0.986 0.900 0.901 2009-Mar-08 23:45:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.947 1.022 1.071 1.089 2009-Mar-08 23:45:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.111 1.040 0.121 2009-Mar-08 23:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.099 (still bad) 2009-Mar-08 23:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.098 (still bad) 2009-Mar-08 23:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.097 (still bad) 2009-Mar-08 23:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.094 (still bad) 2009-Mar-08 23:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.095 (still bad) 2009-Mar-08 23:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:45:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 23:45:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-08 23:45:45 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2009-Mar-08 23:45:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-08 23:45:45 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2009-Mar-08 23:45:45 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Mar-08 23:45:45 LOG5 finish_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2009-Mar-08 23:45:45 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-Mar-08 23:45:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-08 23:45:45 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-Mar-08 23:45:45 LOG5 end_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2009-Mar-08 23:45:45 COMMAND run_command_line: EXECUTING command 19: 'ENDIF' 2009-Mar-08 23:45:45 COMMAND run_command_line: EXECUTING command 22: 'IF LSTSLEW(AGES3193_p2_028) < 102933 THEN' 2009-Mar-08 23:45:46 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_028) < 102933 2009-Mar-08 23:45:46 INFO5 is_if_valid: Condition parsed as: 10.467004333333334 < 10.4925 2009-Mar-08 23:45:46 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=121.29 alfaangle=77.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_028 ra=95300.00 dec=231230.00' 2009-Mar-08 23:45:46 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-Mar-08 23:45:46 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-08 23:45:46 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 121.29 77.2 hcorcal 5 tracking no first 1 AGES3193_p2_028 95300.00 231230.00 J 8500.0 Heliocentric velocity(optical)' 2009-Mar-08 23:45:46 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Mar-08 23:45:46 LOG5 begin_task: Level: (2) ID = <10196> Status = 0 0 0 0 ok 2009-Mar-08 23:45:46 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_026' 2009-Mar-08 23:45:46 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Mar-08 23:45:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_028} 2009-Mar-08 23:45:46 INFO3 fixed_driftmap: Sending telescope to Az = 121.29 and ZA = 9.69 2009-Mar-08 23:45:46 LOG3 track_source: Calling 'track_source AGES3193_p2_028 121.29 9.6879779931 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Mar-08 23:45:46 START begin_task: Starting task 'sending tracking commands' 2009-Mar-08 23:45:46 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2009-Mar-08 23:45:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_028} INFO {Slewing to source 'AGES3193_p2_028' ...} 2009-Mar-08 23:45:46 INFO1 track_source: Starting to track AGES3193_p2_028 2009-Mar-08 23:45:46 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_028" 2009-Mar-08 23:45:46 LOG3 vw_send: To DATATAKING: set ra 121.29 2009-Mar-08 23:45:46 LOG3 vw_send: To DATATAKING: set dec 9.6879779931 2009-Mar-08 23:45:46 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-08 23:45:46 LOG3 vw_send: To DATATAKING: pnt tr 121.29 9.6879779931 -CF 2009-Mar-08 23:45:46 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Mar-08 23:45:46 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-08 23:45:46 LOG5 finish_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2009-Mar-08 23:45:46 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-08 23:45:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 23:45:46 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-08 23:45:46 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2009-Mar-08 23:45:46 START begin_task: Starting task 'rotate ALFA to +77.2 degrees' 2009-Mar-08 23:45:46 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2009-Mar-08 23:45:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +77.2 degrees ...} 2009-Mar-08 23:45:46 INFO2 rotate_alfa: ALFA commanded to +77.2 degrees 2009-Mar-08 23:45:46 LOG3 sock_errsend: To ALFAMOTOR: POSITION 77.2 REPLY 2009-Mar-08 23:45:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Mar-08 23:45:46 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Mar-08 23:45:46 LOG5 begin_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2009-Mar-08 23:45:46 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_028" 2009-Mar-08 23:45:46 LOG4 got_cormsg: From DATATAKING: set ra 121.29 2009-Mar-08 23:45:46 LOG4 got_cormsg: From DATATAKING: set dec 9.6879779931 2009-Mar-08 23:45:46 LOG4 got_cormsg: From DATATAKING: vw% 121.29 2009-Mar-08 23:45:46 LOG4 got_cormsg: From DATATAKING: vw% 9.6879779931 2009-Mar-08 23:45:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:45:46 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-08 23:45:46 LOG4 got_cormsg: From DATATAKING: pnt tr 121.29 9.6879779931 -CF 2009-Mar-08 23:45:46 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Mar-08 23:45:46 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-08 23:45:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.093 (still bad) 2009-Mar-08 23:46:04 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Mar-08 23:46:04 INFO3 alfa_motor: ALFA rotator in-position +77.20 degrees 2009-Mar-08 23:46:04 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Mar-08 23:46:04 LOG5 end_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2009-Mar-08 23:46:04 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-08 23:46:04 STOP finish_task: Finishing task 'rotate ALFA to +77.2 degrees' 2009-Mar-08 23:46:04 LOG5 finish_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2009-Mar-08 23:46:04 INFO2 finish_task: DONE finished configuration: rotating ALFA to +77.2 degrees 2009-Mar-08 23:46:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 23:46:04 STOP end_task: Finishing task 'rotate ALFA to +77.2 degrees' with status 'OK' 2009-Mar-08 23:46:04 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2009-Mar-08 23:46:04 START begin_task: Starting task 'waiting on telescope' 2009-Mar-08 23:46:04 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2009-Mar-08 23:46:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Mar-08 23:46:04 LOG3 waittrk: Start waittrk 5 2009-Mar-08 23:46:04 START begin_task: Starting task 'waiting on telescope movement' 2009-Mar-08 23:46:04 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2009-Mar-08 23:46:09 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Mar-08 23:46:09 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2009-Mar-08 23:46:09 START begin_task: Starting task 'waiting on telescope on source' 2009-Mar-08 23:46:09 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2009-Mar-08 23:47:31 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Mar-08 23:47:31 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2009-Mar-08 23:47:31 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-08 23:47:31 INFO2 waittrk: Now tracking AGES3193_p2_028 2009-Mar-08 23:47:31 LOG4 waittrk: Current telescope position: Az = 121.08 ZA = 9.69 2009-Mar-08 23:47:31 STOP finish_task: Finishing task 'waiting on telescope' 2009-Mar-08 23:47:31 LOG5 finish_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2009-Mar-08 23:47:31 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Mar-08 23:47:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 23:47:31 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Mar-08 23:47:31 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2009-Mar-08 23:47:31 START begin_task: Starting task 'selecting calibration type' 2009-Mar-08 23:47:31 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2009-Mar-08 23:47:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-08 23:47:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-08 23:47:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 23:47:31 START begin_task: Starting task 'waiting on setcal' 2009-Mar-08 23:47:31 LOG5 begin_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2009-Mar-08 23:47:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-08 23:47:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 23:47:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:47:32 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-08 23:47:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-08 23:47:32 LOG5 end_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2009-Mar-08 23:47:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-08 23:47:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-08 23:47:32 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-08 23:47:32 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-08 23:47:32 LOG5 begin_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2009-Mar-08 23:47:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:47:32 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-08 23:47:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-08 23:47:32 LOG5 end_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2009-Mar-08 23:47:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-08 23:47:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-08 23:47:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-08 23:47:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-08 23:47:32 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-08 23:47:32 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2009-Mar-08 23:47:32 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-08 23:47:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-08 23:47:32 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2009-Mar-08 23:47:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-08 23:47:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-08 23:47:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-08 23:47:32 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2009-Mar-08 23:47:32 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-Mar-08 23:47:32 INFO2 astwait: Waiting for 8 seconds from 03:47:32 to 03:47:40 UTC ... 2009-Mar-08 23:47:32 LOG4 send_obs_status: To obs_status: <1> TASKTIME 8 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Mar-08 23:47:33 START begin_task: Starting task 'waiting on waiting for AST time' 2009-Mar-08 23:47:33 LOG5 begin_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2009-Mar-08 23:47:40 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-Mar-08 23:47:40 LOG5 end_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2009-Mar-08 23:47:40 INFO3 astwait: Finished waiting 2009-Mar-08 23:47:40 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-08 23:47:40 LOG5 dopset_later: Calling 'dopset_later 61.449156460324581' 2009-Mar-08 23:47:40 INFO3 dopset_later: Setting Doppler correction for 23:48:40 (61.4 seconds from now) 2009-Mar-08 23:47:40 LOG5 antvel: Calling 'antvel 121.290000 9.687978 F 61.449156460324581' 2009-Mar-08 23:47:40 LOG2 antvel: Transforming current Az = 121.29 ZA = 9.69 to apparent RA = 09:53:33.3 Dec = +23:09:46.8 2009-Mar-08 23:47:40 LOG2 antvel: Parameters to Doppler: Heliocentric 100120 2009 67 0.0 2009-Mar-08 23:47:40 INFO5 antvel: Computed antenna velocity: +12.67102 km/s 2009-Mar-08 23:47:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=12.671016888400001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-Mar-08 23:47:40 INFO4 dopset_gen: New sky frequencies: 1381.185051 1381.185051 1381.185051 1381.185051 1381.185051 1381.185051 1381.185051 1381.185051 1381.185051 2009-Mar-08 23:47:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.185051 sky0=1381.185051 sky1=1381.185051 sky2=1381.185051 sky3=1381.185051 sky4=1381.185051 sky5=1381.185051 sky6=1381.185051 sky7=1381.185051 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-08 23:47:40 LOG2 dopset_gen: Result from 'sky2syn': 1631.185051 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-08 23:47:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631185051.0} 2009-Mar-08 23:47:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 23:47:40 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-Mar-08 23:47:40 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-Mar-08 23:47:40 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.8 Dec = +23:12:23.0 2009-Mar-08 23:47:40 LOG3 track_source: Calling 'track_source AGES3193_p2_028 095203.8 231223.0 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Mar-08 23:47:40 START begin_task: Starting task 'sending tracking commands' 2009-Mar-08 23:47:40 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2009-Mar-08 23:47:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_028} INFO {Slewing to source 'AGES3193_p2_028' ...} 2009-Mar-08 23:47:40 INFO1 track_source: Starting to track AGES3193_p2_028 2009-Mar-08 23:47:40 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_028" 2009-Mar-08 23:47:40 LOG3 vw_send: To DATATAKING: set ra 095203.8 2009-Mar-08 23:47:40 LOG3 vw_send: To DATATAKING: set dec 231223.0 2009-Mar-08 23:47:40 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-08 23:47:40 LOG3 vw_send: To DATATAKING: pnt tr 095203.8 231223.0 -CJ 2009-Mar-08 23:47:40 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Mar-08 23:47:40 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-08 23:47:40 LOG5 finish_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2009-Mar-08 23:47:40 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-08 23:47:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 23:47:40 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-08 23:47:40 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2009-Mar-08 23:47:40 START begin_task: Starting task 'waiting on telescope' 2009-Mar-08 23:47:40 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2009-Mar-08 23:47:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Mar-08 23:47:40 LOG3 waittrk: Start waittrk 5 2009-Mar-08 23:47:40 START begin_task: Starting task 'waiting on telescope movement' 2009-Mar-08 23:47:40 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2009-Mar-08 23:47:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631185051.0} 2009-Mar-08 23:47:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-08 23:47:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:47:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_028" 2009-Mar-08 23:47:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:47:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:47:40 LOG4 got_cormsg: From DATATAKING: set ra 095203.8 2009-Mar-08 23:47:40 LOG4 got_cormsg: From DATATAKING: set dec 231223.0 2009-Mar-08 23:47:40 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-08 23:47:40 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.8 231223.0 -CJ 2009-Mar-08 23:47:40 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Mar-08 23:47:40 LOG4 got_cormsg: From DATATAKING: 095203.8 2009-Mar-08 23:47:40 LOG4 got_cormsg: From DATATAKING: vw% 231223.0 2009-Mar-08 23:47:40 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2009-Mar-08 23:47:45 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Mar-08 23:47:45 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2009-Mar-08 23:47:45 START begin_task: Starting task 'waiting on telescope on source' 2009-Mar-08 23:47:45 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2009-Mar-08 23:47:47 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Mar-08 23:47:47 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2009-Mar-08 23:47:47 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-08 23:47:47 INFO2 waittrk: Now tracking AGES3193_p2_028 2009-Mar-08 23:47:47 LOG4 waittrk: Current telescope position: Az = 121.03 ZA = 9.70 2009-Mar-08 23:47:47 STOP finish_task: Finishing task 'waiting on telescope' 2009-Mar-08 23:47:47 LOG5 finish_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2009-Mar-08 23:47:47 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Mar-08 23:47:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 23:47:47 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Mar-08 23:47:47 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2009-Mar-08 23:47:47 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-08 23:47:47 LOG5 begin_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2009-Mar-08 23:47:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Mar-08 23:47:47 INFO2 adjust_power: Starting to adjust WAPP power 2009-Mar-08 23:47:47 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Mar-08 23:47:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Mar-08 23:47:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 23:47:47 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Mar-08 23:47:47 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2009-Mar-08 23:47:48 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Mar-08 23:47:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 23:47:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:47:50 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-08 23:47:50 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Mar-08 23:47:50 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2009-Mar-08 23:47:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Mar-08 23:47:50 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-08 23:47:50 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2009-Mar-08 23:47:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Mar-08 23:47:50 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-08 23:47:50 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-08 23:47:50 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-08 23:47:50 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-08 23:47:50 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Mar-08 23:47:50 LOG5 begin_task: Level: (5) ID = <10215> Status = 0 0 0 0 ok 2009-Mar-08 23:47:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Mar-08 23:47:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:47:51 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 7 6 dB 2009-Mar-08 23:47:51 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 3 dB 2009-Mar-08 23:47:51 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 4 3 dB 2009-Mar-08 23:47:51 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Mar-08 23:47:51 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Mar-08 23:47:51 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Mar-08 23:47:51 LOG5 end_task: Level: (5) ID = <10215> Status = 0 0 0 0 ok 2009-Mar-08 23:47:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.016 0.945 ALFA beam 1: 0.903 1.114 2009-Mar-08 23:47:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.105 1.017 ALFA beam 3: 0.926 0.905 2009-Mar-08 23:47:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.920 0.980 ALFA beam 5: 1.078 1.082 2009-Mar-08 23:47:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.935 0.110 ALFA beam 7: 1.030 0.120 2009-Mar-08 23:47:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-08 23:47:51 LOG5 finish_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2009-Mar-08 23:47:51 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Mar-08 23:47:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 23:47:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-08 23:47:51 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2009-Mar-08 23:47:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Mar-08 23:47:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-08 23:47:51 LOG5 finish_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2009-Mar-08 23:47:51 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Mar-08 23:47:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 23:47:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-08 23:47:51 LOG5 end_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2009-Mar-08 23:47:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2009-Mar-08 23:47:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2009-Mar-08 23:47:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2009-Mar-08 23:47:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2009-Mar-08 23:47:51 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-Mar-08 23:47:51 START begin_task: Starting task 'WAPP calibration' 2009-Mar-08 23:47:51 LOG5 begin_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2009-Mar-08 23:47:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Mar-08 23:47:51 START begin_task: Starting task 'selecting calibration type' 2009-Mar-08 23:47:51 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2009-Mar-08 23:47:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-08 23:47:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-08 23:47:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 23:47:51 START begin_task: Starting task 'waiting on setcal' 2009-Mar-08 23:47:51 LOG5 begin_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2009-Mar-08 23:47:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Mar-08 23:47:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-08 23:47:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-08 23:47:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:47:52 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-08 23:47:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-08 23:47:52 LOG5 end_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2009-Mar-08 23:47:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-08 23:47:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-08 23:47:52 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-08 23:47:52 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-08 23:47:52 LOG5 begin_task: Level: (5) ID = <10219> Status = 0 0 0 0 ok 2009-Mar-08 23:47:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:47:52 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-08 23:47:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-08 23:47:52 LOG5 end_task: Level: (5) ID = <10219> Status = 0 0 0 0 ok 2009-Mar-08 23:47:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-08 23:47:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-08 23:47:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-08 23:47:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-08 23:47:52 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-08 23:47:52 LOG5 begin_task: Level: (5) ID = <10220> Status = 0 0 0 0 ok 2009-Mar-08 23:47:52 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-08 23:47:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-08 23:47:52 LOG5 end_task: Level: (5) ID = <10220> Status = 0 0 0 0 ok 2009-Mar-08 23:47:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-08 23:47:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-08 23:47:52 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-08 23:47:52 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2009-Mar-08 23:47:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Mar-08 23:47:52 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Mar-08 23:47:52 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Mar-08 23:47:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-08 23:47:52 LOG5 begin_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2009-Mar-08 23:47:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20090308.a2048.0003.fits 2009-Mar-08 23:47:52 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090308.a2048.0003.fits} 2009-Mar-08 23:47:52 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-08 23:47:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Mar-08 23:47:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-08 23:47:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-08 23:47:52 LOG5 end_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2009-Mar-08 23:47:52 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-Mar-08 23:47:52 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-Mar-08 23:47:52 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-08 23:47:52 LOG5 begin_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2009-Mar-08 23:47:52 LOG5 log_alfabeam: Parameters: 9.8677222222222234 23.206388888888888 10.479046 2009.186150784597 77.199921 2009-Mar-08 23:47:52 LOG4 log_alfabeam: ALFABEAM 0 9.867722222222225 23.206388888888899 2009-Mar-08 23:47:52 LOG4 log_alfabeam: ALFABEAM 1 9.870116781570429 23.113508492293288 2009-Mar-08 23:47:52 LOG4 log_alfabeam: ALFABEAM 2 9.875068257234993 23.175303556790784 2009-Mar-08 23:47:52 LOG4 log_alfabeam: ALFABEAM 3 9.872728687752144 23.268300795051527 2009-Mar-08 23:47:52 LOG4 log_alfabeam: ALFABEAM 4 9.865387385146406 23.299921516598872 2009-Mar-08 23:47:52 LOG4 log_alfabeam: ALFABEAM 5 9.860360883176517 23.236998590039825 2009-Mar-08 23:47:52 LOG4 log_alfabeam: ALFABEAM 6 9.862751112166462 23.143581917227898 2009-Mar-08 23:47:52 INFO2 take_data: Starting WAPP scan: 906700184 2009-Mar-08 23:47:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Mar-08 23:47:53 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-08 23:47:53 LOG5 begin_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2009-Mar-08 23:47:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 23:47:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-08 23:47:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.016 0.945 0.903 1.114 2009-Mar-08 23:47:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.105 1.017 0.926 0.905 2009-Mar-08 23:47:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.920 0.980 1.078 1.082 2009-Mar-08 23:47:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.110 1.030 0.120 2009-Mar-08 23:47:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13674.00 2009-Mar-08 23:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.185051 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 23:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.185051 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 23:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.185051 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 23:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.185051 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 23:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-08 23:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.185051 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 23:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.185051 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 23:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.185051 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 23:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.185051 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 23:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.185051 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 23:47:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 23:47:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-08 23:47:59 LOG5 end_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2009-Mar-08 23:47:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-08 23:47:59 LOG5 end_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2009-Mar-08 23:47:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Mar-08 23:47:59 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-08 23:47:59 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-08 23:47:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-08 23:47:59 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2009-Mar-08 23:48:00 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-08 23:48:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-08 23:48:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-08 23:48:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-08 23:48:00 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2009-Mar-08 23:48:00 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-Mar-08 23:48:00 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-Mar-08 23:48:00 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-08 23:48:00 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2009-Mar-08 23:48:00 LOG5 log_alfabeam: Parameters: 9.8677222222222234 23.206388888888888 10.480996 2009.1861510064136 77.199921 2009-Mar-08 23:48:00 LOG4 log_alfabeam: ALFABEAM 0 9.867722222222227 23.206388888888888 2009-Mar-08 23:48:00 LOG4 log_alfabeam: ALFABEAM 1 9.870126681129522 23.113556700316309 2009-Mar-08 23:48:00 LOG4 log_alfabeam: ALFABEAM 2 9.875071609623632 23.175454206084975 2009-Mar-08 23:48:00 LOG4 log_alfabeam: ALFABEAM 3 9.872721986712722 23.268404106675813 2009-Mar-08 23:48:00 LOG4 log_alfabeam: ALFABEAM 4 9.865377245817454 23.299872884096178 2009-Mar-08 23:48:00 LOG4 log_alfabeam: ALFABEAM 5 9.860357618187132 23.236848620234039 2009-Mar-08 23:48:00 LOG4 log_alfabeam: ALFABEAM 6 9.862757830403025 23.143481464199382 2009-Mar-08 23:48:00 INFO2 take_data: Starting WAPP scan: 906700185 2009-Mar-08 23:48:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Mar-08 23:48:00 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-08 23:48:00 LOG5 begin_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2009-Mar-08 23:48:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 23:48:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13681.00 2009-Mar-08 23:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.519 (still bad) 2009-Mar-08 23:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.185051 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 23:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.185051 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 23:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.185051 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 23:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.185051 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 23:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.185051 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 23:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.185051 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 23:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.185051 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 23:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.185051 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 23:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.185051 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 23:48:06 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-Mar-08 23:48:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-08 23:48:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-08 23:48:06 LOG5 end_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2009-Mar-08 23:48:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-08 23:48:06 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2009-Mar-08 23:48:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Mar-08 23:48:06 STOP finish_task: Finishing task 'WAPP calibration' 2009-Mar-08 23:48:06 LOG5 finish_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2009-Mar-08 23:48:06 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Mar-08 23:48:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 23:48:06 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Mar-08 23:48:06 LOG5 end_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2009-Mar-08 23:48:07 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-Mar-08 23:48:07 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 121.29 and ZA = 9.69 2009-Mar-08 23:48:07 LOG3 track_source: Calling 'track_source AGES3193_p2_028 121.29 9.6879779931 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Mar-08 23:48:07 START begin_task: Starting task 'sending tracking commands' 2009-Mar-08 23:48:07 LOG5 begin_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2009-Mar-08 23:48:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_028} INFO {Slewing to source 'AGES3193_p2_028' ...} 2009-Mar-08 23:48:07 INFO1 track_source: Starting to track AGES3193_p2_028 2009-Mar-08 23:48:07 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_028" 2009-Mar-08 23:48:07 LOG3 vw_send: To DATATAKING: set ra 121.29 2009-Mar-08 23:48:07 LOG3 vw_send: To DATATAKING: set dec 9.6879779931 2009-Mar-08 23:48:07 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-08 23:48:07 LOG3 vw_send: To DATATAKING: pnt tr 121.29 9.6879779931 -CF 2009-Mar-08 23:48:07 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Mar-08 23:48:07 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-08 23:48:07 LOG5 finish_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2009-Mar-08 23:48:07 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-08 23:48:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-08 23:48:07 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-08 23:48:07 LOG5 end_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2009-Mar-08 23:48:07 LOG1 fixed_driftmap: Parameters: HA = +00:35:59.7 Start = 10:29:33.1 LST = 10:28:58.6 diff = 34.5 secs 2009-Mar-08 23:48:07 INFO2 fixed_driftmap: Waiting 32.5 seconds for RA 9:53:33 2009-Mar-08 23:48:07 INFO2 lstwait: Waiting for 32.5 secs from LST 10:28:59 to LST 10:29:31 ... 2009-Mar-08 23:48:07 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.456534649119597 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Mar-08 23:48:07 START begin_task: Starting task 'waiting on wait on LST' 2009-Mar-08 23:48:07 LOG5 begin_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2009-Mar-08 23:48:07 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_028" 2009-Mar-08 23:48:07 LOG4 got_cormsg: From DATATAKING: set ra 121.29 2009-Mar-08 23:48:07 LOG4 got_cormsg: From DATATAKING: set dec 9.6879779931 2009-Mar-08 23:48:07 LOG4 got_cormsg: From DATATAKING: vw% 121.29 2009-Mar-08 23:48:07 LOG4 got_cormsg: From DATATAKING: vw% 9.6879779931 2009-Mar-08 23:48:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:48:07 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-08 23:48:07 LOG4 got_cormsg: From DATATAKING: pnt tr 121.29 9.6879779931 -CF 2009-Mar-08 23:48:07 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Mar-08 23:48:07 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-08 23:48:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-08 23:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:48:39 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Mar-08 23:48:39 LOG5 end_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2009-Mar-08 23:48:39 LOG4 lstwait: Finished waiting 0.55 seconds late 2009-Mar-08 23:48:39 INFO3 lstwait: Finished waiting 2009-Mar-08 23:48:39 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-08 23:48:39 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-Mar-08 23:48:39 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Mar-08 23:48:39 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-Mar-08 23:48:39 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Mar-08 23:48:39 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-Mar-08 23:48:39 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-08 23:48:39 LOG5 begin_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2009-Mar-08 23:48:39 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Mar-08 23:48:39 INFO2 take_data: Starting WAPP scan: 906700186 2009-Mar-08 23:48:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-Mar-08 23:48:40 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-08 23:48:40 LOG5 begin_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2009-Mar-08 23:48:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-08 23:48:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13721.00 2009-Mar-08 23:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.185051 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-08 23:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.185051 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 23:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.185051 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 23:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.185051 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 23:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.185051 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 23:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.185051 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-08 23:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.185051 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-08 23:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.185051 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-08 23:48:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.185051 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-08 23:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-08 23:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-08 23:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-08 23:48:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:48:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.021 0.944 0.902 1.113 2009-Mar-08 23:48:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.101 1.019 0.927 0.901 2009-Mar-08 23:48:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.922 0.981 1.075 1.084 2009-Mar-08 23:48:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.111 1.033 0.121 2009-Mar-08 23:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-Mar-08 23:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.125 (still bad) 2009-Mar-08 23:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.129 (still bad) 2009-Mar-08 23:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.130 (still bad) 2009-Mar-08 23:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.129 (still bad) 2009-Mar-08 23:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.128 (still bad) 2009-Mar-08 23:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad) 2009-Mar-08 23:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad) 2009-Mar-08 23:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.126 (still bad) 2009-Mar-08 23:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.129 (still bad) 2009-Mar-08 23:49:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-08 23:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.136 (still bad) 2009-Mar-08 23:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.142 (still bad) 2009-Mar-08 23:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.148 (still bad) 2009-Mar-08 23:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.156 (still bad) 2009-Mar-08 23:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.159 (still bad) 2009-Mar-08 23:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.158 (still bad) 2009-Mar-08 23:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.153 (still bad) 2009-Mar-08 23:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.147 (still bad) 2009-Mar-08 23:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.141 (still bad) 2009-Mar-08 23:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.132 (still bad) 2009-Mar-08 23:49:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:49:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.024 0.946 0.910 1.127 2009-Mar-08 23:49:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.100 1.019 0.926 0.904 2009-Mar-08 23:49:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.924 0.982 1.077 1.085 2009-Mar-08 23:49:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.111 1.038 0.121 2009-Mar-08 23:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-08 23:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-08 23:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-08 23:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-08 23:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-08 23:50:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:50:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.020 0.943 0.900 1.114 2009-Mar-08 23:50:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.103 1.017 0.926 0.901 2009-Mar-08 23:50:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.921 0.977 1.079 1.087 2009-Mar-08 23:50:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.111 1.035 0.121 2009-Mar-08 23:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-08 23:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-08 23:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-Mar-08 23:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-08 23:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-08 23:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-08 23:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-08 23:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-08 23:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-08 23:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-08 23:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-08 23:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-08 23:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-08 23:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-08 23:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-08 23:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-08 23:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-08 23:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-08 23:51:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:51:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.020 0.943 0.901 1.114 2009-Mar-08 23:51:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.104 1.019 0.926 0.899 2009-Mar-08 23:51:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.919 0.974 1.078 1.085 2009-Mar-08 23:51:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.111 1.035 0.121 2009-Mar-08 23:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-08 23:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-08 23:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.127 (still bad) 2009-Mar-08 23:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.132 (still bad) 2009-Mar-08 23:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.139 (still bad) 2009-Mar-08 23:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.141 (still bad) 2009-Mar-08 23:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.144 (still bad) 2009-Mar-08 23:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.144 (still bad) 2009-Mar-08 23:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.140 (still bad) 2009-Mar-08 23:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.136 (still bad) 2009-Mar-08 23:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.129 (still bad) 2009-Mar-08 23:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-Mar-08 23:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-08 23:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-08 23:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-08 23:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-08 23:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-08 23:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-08 23:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-08 23:52:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:52:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.019 0.943 0.900 1.113 2009-Mar-08 23:52:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.102 1.021 0.927 0.901 2009-Mar-08 23:52:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.919 0.979 1.078 1.088 2009-Mar-08 23:52:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.111 1.040 0.121 2009-Mar-08 23:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-08 23:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-Mar-08 23:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-08 23:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:54:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:54:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 0.948 0.904 1.118 2009-Mar-08 23:54:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.107 1.024 0.928 0.903 2009-Mar-08 23:54:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.922 0.981 1.078 1.079 2009-Mar-08 23:54:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.111 1.035 0.121 2009-Mar-08 23:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.115 (still bad) 2009-Mar-08 23:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-08 23:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-08 23:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.115 (still bad) 2009-Mar-08 23:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:55:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:55:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 0.945 0.904 1.116 2009-Mar-08 23:55:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.106 1.019 0.927 0.901 2009-Mar-08 23:55:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.917 0.975 1.078 1.073 2009-Mar-08 23:55:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.111 1.036 0.121 2009-Mar-08 23:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-08 23:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-08 23:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-08 23:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:56:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:56:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 0.945 0.903 1.117 2009-Mar-08 23:56:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.106 1.019 0.925 0.902 2009-Mar-08 23:56:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.915 0.973 1.075 1.072 2009-Mar-08 23:56:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.111 1.037 0.121 2009-Mar-08 23:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-08 23:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-08 23:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-08 23:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-08 23:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-08 23:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-08 23:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-08 23:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-08 23:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-08 23:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-08 23:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-08 23:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-08 23:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:57:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:57:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.021 0.949 0.905 1.117 2009-Mar-08 23:57:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.107 1.021 0.928 0.907 2009-Mar-08 23:57:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.914 0.972 1.076 1.074 2009-Mar-08 23:57:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.111 1.040 0.121 2009-Mar-08 23:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-08 23:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-08 23:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-08 23:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-08 23:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-08 23:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-08 23:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-08 23:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-08 23:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-08 23:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-08 23:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:58:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-08 23:58:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.022 0.948 0.902 1.117 2009-Mar-08 23:58:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.108 1.022 0.926 0.903 2009-Mar-08 23:58:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.912 0.971 1.077 1.074 2009-Mar-08 23:58:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.111 1.037 0.121 2009-Mar-08 23:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-08 23:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-08 23:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-08 23:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-08 23:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-08 23:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-08 23:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-08 23:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-08 23:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-08 23:59:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-08 23:59:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.023 0.946 0.904 1.117 2009-Mar-08 23:59:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.109 1.019 0.928 0.904 2009-Mar-08 23:59:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.919 0.975 1.073 1.075 2009-Mar-08 23:59:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.112 1.039 0.121 2009-Mar-08 23:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-08 23:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-08 23:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-08 23:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-08 23:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-08 23:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-08 23:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-08 23:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-08 23:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-08 23:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.115 (still bad) 2009-Mar-08 23:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.113 (still bad) 2009-Mar-08 23:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-08 23:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-08 23:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.115 (still bad) 2009-Mar-08 23:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-08 23:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-08 23:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-08 23:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:00:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 00:00:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.024 0.949 0.905 1.116 2009-Mar-09 00:00:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.114 1.026 0.928 0.903 2009-Mar-09 00:00:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.912 0.971 1.075 1.070 2009-Mar-09 00:00:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.111 1.037 0.121 2009-Mar-09 00:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.114 (still bad) 2009-Mar-09 00:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.114 (still bad) 2009-Mar-09 00:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-09 00:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.115 (still bad) 2009-Mar-09 00:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.115 (still bad) 2009-Mar-09 00:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:01:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 00:01:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.023 0.950 0.905 1.116 2009-Mar-09 00:01:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.115 1.026 0.930 0.906 2009-Mar-09 00:01:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.914 0.975 1.087 1.088 2009-Mar-09 00:01:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.111 1.036 0.121 2009-Mar-09 00:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 00:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 00:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 00:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.131 (still bad) 2009-Mar-09 00:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.133 (still bad) 2009-Mar-09 00:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.132 (still bad) 2009-Mar-09 00:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.130 (still bad) 2009-Mar-09 00:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 00:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 00:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 00:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 00:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.115 (still bad) 2009-Mar-09 00:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-09 00:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-09 00:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 00:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 00:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 00:02:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-09 00:02:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 0.952 0.906 1.121 2009-Mar-09 00:02:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.114 1.025 0.928 0.912 2009-Mar-09 00:02:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.917 0.974 1.099 1.095 2009-Mar-09 00:02:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.112 1.037 0.121 2009-Mar-09 00:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 00:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 00:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 00:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 00:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 00:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 00:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 00:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 00:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 00:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 00:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 00:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 00:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 00:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 00:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 00:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 00:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 00:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 00:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2009-Mar-09 00:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 00:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 00:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:03:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-09 00:03:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 0.953 0.904 1.118 2009-Mar-09 00:03:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.111 1.025 0.929 0.907 2009-Mar-09 00:03:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.916 0.975 1.079 1.075 2009-Mar-09 00:03:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.112 1.039 0.122 2009-Mar-09 00:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 00:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 00:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 00:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 00:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-09 00:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-09 00:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 00:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.115 (still bad) 2009-Mar-09 00:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.115 (still bad) 2009-Mar-09 00:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 00:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 00:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 00:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 00:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 00:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 00:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 00:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 00:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 00:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 00:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 00:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 00:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 00:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 00:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 00:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 00:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 00:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 00:04:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-09 00:04:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.026 0.951 0.910 1.124 2009-Mar-09 00:04:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.113 1.027 0.929 0.904 2009-Mar-09 00:04:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.917 0.973 1.078 1.074 2009-Mar-09 00:04:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.112 1.039 0.122 2009-Mar-09 00:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 00:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 00:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 00:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 00:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 00:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 00:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 00:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 00:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 00:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 00:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 00:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 00:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.129 (still bad) 2009-Mar-09 00:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.130 (still bad) 2009-Mar-09 00:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.128 (still bad) 2009-Mar-09 00:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.129 (still bad) 2009-Mar-09 00:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 00:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 00:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 00:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 00:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 00:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 00:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:05:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-09 00:05:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.037 0.967 0.907 1.119 2009-Mar-09 00:05:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.112 1.027 0.934 0.910 2009-Mar-09 00:05:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.917 0.976 1.081 1.079 2009-Mar-09 00:05:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.112 1.040 0.122 2009-Mar-09 00:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 00:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 00:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 00:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 00:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 00:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 00:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 00:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 00:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 00:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 00:05:43 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 54899.170613 to 54899.170625! 2009-Mar-09 00:05:44 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (54899.170613 - 54899.170637)! 2009-Mar-09 00:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 00:05:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-09 00:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 00:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 00:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 00:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 00:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 00:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 00:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 00:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 00:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 00:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 00:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.129 (still bad) 2009-Mar-09 00:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 00:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 00:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 00:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 00:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 00:06:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-09 00:06:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 0.953 0.911 1.124 2009-Mar-09 00:06:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.110 1.024 0.931 0.907 2009-Mar-09 00:06:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.917 0.973 1.077 1.099 2009-Mar-09 00:06:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.112 1.045 0.122 2009-Mar-09 00:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 00:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 00:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 00:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 00:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 00:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 00:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 00:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 00:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 00:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 00:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 00:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 00:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 00:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 00:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 00:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 00:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 00:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 00:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 00:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 00:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 00:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 00:07:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-09 00:07:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.024 0.951 0.908 1.122 2009-Mar-09 00:07:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.131 1.043 0.932 0.914 2009-Mar-09 00:07:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.915 0.976 1.081 1.092 2009-Mar-09 00:07:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.112 1.042 0.122 2009-Mar-09 00:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.140 (still bad) 2009-Mar-09 00:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.151 (still bad) 2009-Mar-09 00:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.157 (still bad) 2009-Mar-09 00:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.158 (still bad) 2009-Mar-09 00:07:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-09 00:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.155 (still bad) 2009-Mar-09 00:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.152 (still bad) 2009-Mar-09 00:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.142 (still bad) 2009-Mar-09 00:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.133 (still bad) 2009-Mar-09 00:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 00:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 00:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 00:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 00:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 00:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 00:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 00:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 00:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 00:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 00:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 00:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 00:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 00:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 00:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 00:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 00:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 00:08:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-09 00:08:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.044 0.971 0.913 1.126 2009-Mar-09 00:08:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.111 1.025 0.930 0.909 2009-Mar-09 00:08:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.921 0.979 1.096 1.104 2009-Mar-09 00:08:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.112 1.042 0.122 2009-Mar-09 00:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 00:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.131 (still bad) 2009-Mar-09 00:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.129 (still bad) 2009-Mar-09 00:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 00:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 00:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 00:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 00:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.131 (still bad) 2009-Mar-09 00:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.134 (still bad) 2009-Mar-09 00:08:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-09 00:08:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-09 00:08:41 LOG5 end_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2009-Mar-09 00:08:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-09 00:08:41 LOG5 end_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2009-Mar-09 00:08:41 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Mar-09 00:08:41 LOG5 finish_task: Level: (2) ID = <10196> Status = 0 0 0 0 ok 2009-Mar-09 00:08:41 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-Mar-09 00:08:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-09 00:08:41 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-Mar-09 00:08:41 LOG5 end_task: Level: (2) ID = <10196> Status = 0 0 0 0 ok 2009-Mar-09 00:08:41 COMMAND run_command_line: EXECUTING command 26: 'ENDIF' 2009-Mar-09 00:08:41 COMMAND run_command_line: EXECUTING command 29: 'IF LSTSLEW(AGES3193_p2_030) < 105232 THEN' 2009-Mar-09 00:08:42 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p2_030) < 105232 2009-Mar-09 00:08:42 INFO5 is_if_valid: Condition parsed as: 10.85694 < 10.875555555555556 2009-Mar-09 00:08:42 COMMAND run_command_line: EXECUTING command 30: 'FIXEDDRIFT az=111.56 alfaangle=-89.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p2_030 ra=95300.00 dec=230930.00' 2009-Mar-09 00:08:42 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-Mar-09 00:08:42 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-09 00:08:42 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 111.56 -89.7 hcorcal 5 tracking no first 1 AGES3193_p2_030 95300.00 230930.00 J 8500.0 Heliocentric velocity(optical)' 2009-Mar-09 00:08:42 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Mar-09 00:08:42 LOG5 begin_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2009-Mar-09 00:08:42 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_028' 2009-Mar-09 00:08:42 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Mar-09 00:08:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p2_030} 2009-Mar-09 00:08:42 INFO3 fixed_driftmap: Sending telescope to Az = 111.56 and ZA = 14.58 2009-Mar-09 00:08:42 LOG3 track_source: Calling 'track_source AGES3193_p2_030 111.56 14.5805487385 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Mar-09 00:08:42 START begin_task: Starting task 'sending tracking commands' 2009-Mar-09 00:08:42 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2009-Mar-09 00:08:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_030} INFO {Slewing to source 'AGES3193_p2_030' ...} 2009-Mar-09 00:08:42 INFO1 track_source: Starting to track AGES3193_p2_030 2009-Mar-09 00:08:42 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_030" 2009-Mar-09 00:08:42 LOG3 vw_send: To DATATAKING: set ra 111.56 2009-Mar-09 00:08:42 LOG3 vw_send: To DATATAKING: set dec 14.5805487385 2009-Mar-09 00:08:42 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-09 00:08:42 LOG3 vw_send: To DATATAKING: pnt tr 111.56 14.5805487385 -CF 2009-Mar-09 00:08:42 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Mar-09 00:08:42 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-09 00:08:42 LOG5 finish_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2009-Mar-09 00:08:42 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-09 00:08:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 00:08:42 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-09 00:08:42 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2009-Mar-09 00:08:42 START begin_task: Starting task 'rotate ALFA to -89.7 degrees' 2009-Mar-09 00:08:42 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2009-Mar-09 00:08:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -89.7 degrees ...} 2009-Mar-09 00:08:42 INFO2 rotate_alfa: ALFA commanded to -89.7 degrees 2009-Mar-09 00:08:42 LOG3 sock_errsend: To ALFAMOTOR: POSITION -89.7 REPLY 2009-Mar-09 00:08:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Mar-09 00:08:42 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Mar-09 00:08:42 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2009-Mar-09 00:08:42 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_030" 2009-Mar-09 00:08:42 LOG4 got_cormsg: From DATATAKING: set ra 111.56 2009-Mar-09 00:08:42 LOG4 got_cormsg: From DATATAKING: set dec 14.5805487385 2009-Mar-09 00:08:42 LOG4 got_cormsg: From DATATAKING: vw% 111.56 2009-Mar-09 00:08:42 LOG4 got_cormsg: From DATATAKING: vw% 14.5805487385 2009-Mar-09 00:08:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:08:42 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-09 00:08:42 LOG4 got_cormsg: From DATATAKING: pnt tr 111.56 14.5805487385 -CF 2009-Mar-09 00:08:42 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Mar-09 00:08:42 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2009-Mar-09 00:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.136 (still bad) 2009-Mar-09 00:10:15 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Mar-09 00:10:15 INFO3 alfa_motor: ALFA rotator in-position -89.70 degrees 2009-Mar-09 00:10:15 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Mar-09 00:10:15 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2009-Mar-09 00:10:15 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-09 00:10:15 STOP finish_task: Finishing task 'rotate ALFA to -89.7 degrees' 2009-Mar-09 00:10:15 LOG5 finish_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2009-Mar-09 00:10:15 INFO2 finish_task: DONE finished configuration: rotating ALFA to -89.7 degrees 2009-Mar-09 00:10:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 00:10:15 STOP end_task: Finishing task 'rotate ALFA to -89.7 degrees' with status 'OK' 2009-Mar-09 00:10:15 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2009-Mar-09 00:10:15 START begin_task: Starting task 'waiting on telescope' 2009-Mar-09 00:10:15 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2009-Mar-09 00:10:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Mar-09 00:10:15 LOG3 waittrk: Start waittrk 5 2009-Mar-09 00:10:15 START begin_task: Starting task 'waiting on telescope movement' 2009-Mar-09 00:10:15 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2009-Mar-09 00:10:20 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Mar-09 00:10:20 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2009-Mar-09 00:10:21 START begin_task: Starting task 'waiting on telescope on source' 2009-Mar-09 00:10:21 LOG5 begin_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2009-Mar-09 00:10:49 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Mar-09 00:10:49 LOG5 end_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2009-Mar-09 00:10:49 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-09 00:10:49 INFO2 waittrk: Now tracking AGES3193_p2_030 2009-Mar-09 00:10:49 LOG4 waittrk: Current telescope position: Az = 111.31 ZA = 14.59 2009-Mar-09 00:10:49 STOP finish_task: Finishing task 'waiting on telescope' 2009-Mar-09 00:10:49 LOG5 finish_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2009-Mar-09 00:10:49 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Mar-09 00:10:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 00:10:49 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Mar-09 00:10:49 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2009-Mar-09 00:10:49 START begin_task: Starting task 'selecting calibration type' 2009-Mar-09 00:10:49 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2009-Mar-09 00:10:49 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-09 00:10:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-09 00:10:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-09 00:10:49 START begin_task: Starting task 'waiting on setcal' 2009-Mar-09 00:10:49 LOG5 begin_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2009-Mar-09 00:10:49 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-09 00:10:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-09 00:10:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:10:51 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-09 00:10:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-09 00:10:51 LOG5 end_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2009-Mar-09 00:10:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-09 00:10:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-09 00:10:51 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-09 00:10:51 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-09 00:10:51 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2009-Mar-09 00:10:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:10:51 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-09 00:10:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-09 00:10:51 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2009-Mar-09 00:10:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-09 00:10:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-09 00:10:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-09 00:10:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-09 00:10:51 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-09 00:10:51 LOG5 begin_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2009-Mar-09 00:10:51 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-09 00:10:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-09 00:10:51 LOG5 end_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2009-Mar-09 00:10:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-09 00:10:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-09 00:10:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-09 00:10:51 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2009-Mar-09 00:10:51 LOG5 dopset_later: Calling 'dopset_later 45.361739684501387' 2009-Mar-09 00:10:51 INFO3 dopset_later: Setting Doppler correction for 00:11:36 (45.4 seconds from now) 2009-Mar-09 00:10:51 LOG5 antvel: Calling 'antvel 111.560000 14.580549 F 45.361739684501387' 2009-Mar-09 00:10:51 LOG2 antvel: Transforming current Az = 111.56 ZA = 14.58 to apparent RA = 09:53:33.3 Dec = +23:06:46.8 2009-Mar-09 00:10:51 LOG2 antvel: Parameters to Doppler: Heliocentric 15096 2009 68 0.0 2009-Mar-09 00:10:51 INFO5 antvel: Computed antenna velocity: +12.71176 km/s 2009-Mar-09 00:10:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=12.7117576126 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-Mar-09 00:10:51 INFO4 dopset_gen: New sky frequencies: 1381.184864 1381.184864 1381.184864 1381.184864 1381.184864 1381.184864 1381.184864 1381.184864 1381.184864 2009-Mar-09 00:10:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.184864 sky0=1381.184864 sky1=1381.184864 sky2=1381.184864 sky3=1381.184864 sky4=1381.184864 sky5=1381.184864 sky6=1381.184864 sky7=1381.184864 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-09 00:10:51 LOG2 dopset_gen: Result from 'sky2syn': 1631.184864 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-09 00:10:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631184864.0} 2009-Mar-09 00:10:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-09 00:10:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-Mar-09 00:10:51 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-Mar-09 00:10:51 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:19.9 Dec = +23:09:23.2 2009-Mar-09 00:10:51 LOG3 track_source: Calling 'track_source AGES3193_p2_030 095219.9 230923.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Mar-09 00:10:51 START begin_task: Starting task 'sending tracking commands' 2009-Mar-09 00:10:51 LOG5 begin_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2009-Mar-09 00:10:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_030} INFO {Slewing to source 'AGES3193_p2_030' ...} 2009-Mar-09 00:10:51 INFO1 track_source: Starting to track AGES3193_p2_030 2009-Mar-09 00:10:51 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_030" 2009-Mar-09 00:10:51 LOG3 vw_send: To DATATAKING: set ra 095219.9 2009-Mar-09 00:10:51 LOG3 vw_send: To DATATAKING: set dec 230923.2 2009-Mar-09 00:10:51 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-09 00:10:51 LOG3 vw_send: To DATATAKING: pnt tr 095219.9 230923.2 -CJ 2009-Mar-09 00:10:51 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Mar-09 00:10:51 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-09 00:10:51 LOG5 finish_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2009-Mar-09 00:10:51 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-09 00:10:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 00:10:51 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-09 00:10:51 LOG5 end_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2009-Mar-09 00:10:51 START begin_task: Starting task 'waiting on telescope' 2009-Mar-09 00:10:51 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2009-Mar-09 00:10:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Mar-09 00:10:51 LOG3 waittrk: Start waittrk 5 2009-Mar-09 00:10:51 START begin_task: Starting task 'waiting on telescope movement' 2009-Mar-09 00:10:51 LOG5 begin_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2009-Mar-09 00:10:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631184864.0} 2009-Mar-09 00:10:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-09 00:10:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:10:51 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_030" 2009-Mar-09 00:10:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:10:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:10:51 LOG4 got_cormsg: From DATATAKING: set ra 095219.9 2009-Mar-09 00:10:51 LOG4 got_cormsg: From DATATAKING: set dec 230923.2 2009-Mar-09 00:10:51 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-09 00:10:51 LOG4 got_cormsg: From DATATAKING: pnt tr 095219.9 230923.2 -CJ 2009-Mar-09 00:10:51 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Mar-09 00:10:51 LOG4 got_cormsg: From DATATAKING: 095219.9 2009-Mar-09 00:10:51 LOG4 got_cormsg: From DATATAKING: vw% 230923.2 2009-Mar-09 00:10:51 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2009-Mar-09 00:10:56 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Mar-09 00:10:56 LOG5 end_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2009-Mar-09 00:10:56 START begin_task: Starting task 'waiting on telescope on source' 2009-Mar-09 00:10:56 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2009-Mar-09 00:10:59 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Mar-09 00:10:59 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2009-Mar-09 00:10:59 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-09 00:10:59 INFO2 waittrk: Now tracking AGES3193_p2_030 2009-Mar-09 00:10:59 LOG4 waittrk: Current telescope position: Az = 111.29 ZA = 14.60 2009-Mar-09 00:10:59 STOP finish_task: Finishing task 'waiting on telescope' 2009-Mar-09 00:10:59 LOG5 finish_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2009-Mar-09 00:10:59 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Mar-09 00:10:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 00:10:59 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Mar-09 00:10:59 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2009-Mar-09 00:10:59 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-09 00:10:59 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2009-Mar-09 00:10:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Mar-09 00:10:59 INFO2 adjust_power: Starting to adjust WAPP power 2009-Mar-09 00:10:59 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Mar-09 00:10:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Mar-09 00:10:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-09 00:10:59 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Mar-09 00:10:59 LOG5 begin_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2009-Mar-09 00:10:59 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Mar-09 00:10:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-09 00:11:02 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Mar-09 00:11:02 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Mar-09 00:11:02 LOG5 end_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2009-Mar-09 00:11:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Mar-09 00:11:02 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-09 00:11:02 LOG5 begin_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2009-Mar-09 00:11:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Mar-09 00:11:02 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-09 00:11:02 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-09 00:11:02 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-09 00:11:02 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-09 00:11:02 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Mar-09 00:11:02 LOG5 begin_task: Level: (5) ID = <10249> Status = 0 0 0 0 ok 2009-Mar-09 00:11:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:11:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Mar-09 00:11:02 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 7 6 dB 2009-Mar-09 00:11:02 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 6 4 dB 2009-Mar-09 00:11:02 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 7 4 dB --- beam 3: 4 3 dB 2009-Mar-09 00:11:02 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Mar-09 00:11:02 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Mar-09 00:11:02 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Mar-09 00:11:02 LOG5 end_task: Level: (5) ID = <10249> Status = 0 0 0 0 ok 2009-Mar-09 00:11:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.072 0.978 ALFA beam 1: 0.944 1.101 2009-Mar-09 00:11:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.892 1.023 ALFA beam 3: 0.933 0.946 2009-Mar-09 00:11:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.959 1.059 ALFA beam 5: 0.932 0.907 2009-Mar-09 00:11:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.016 0.111 ALFA beam 7: 1.118 0.121 2009-Mar-09 00:11:03 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-09 00:11:03 LOG5 finish_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2009-Mar-09 00:11:03 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Mar-09 00:11:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 00:11:03 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-09 00:11:03 LOG5 end_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2009-Mar-09 00:11:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Mar-09 00:11:03 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-09 00:11:03 LOG5 finish_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2009-Mar-09 00:11:03 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Mar-09 00:11:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 00:11:03 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-09 00:11:03 LOG5 end_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2009-Mar-09 00:11:03 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2009-Mar-09 00:11:03 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2009-Mar-09 00:11:03 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2009-Mar-09 00:11:03 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2009-Mar-09 00:11:03 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-Mar-09 00:11:03 START begin_task: Starting task 'WAPP calibration' 2009-Mar-09 00:11:03 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2009-Mar-09 00:11:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Mar-09 00:11:03 START begin_task: Starting task 'selecting calibration type' 2009-Mar-09 00:11:03 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2009-Mar-09 00:11:03 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-09 00:11:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-09 00:11:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-09 00:11:03 START begin_task: Starting task 'waiting on setcal' 2009-Mar-09 00:11:03 LOG5 begin_task: Level: (5) ID = <10252> Status = 0 0 0 0 ok 2009-Mar-09 00:11:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Mar-09 00:11:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-09 00:11:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-09 00:11:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:11:03 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-09 00:11:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-09 00:11:03 LOG5 end_task: Level: (5) ID = <10252> Status = 0 0 0 0 ok 2009-Mar-09 00:11:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-09 00:11:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-09 00:11:03 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-09 00:11:03 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-09 00:11:03 LOG5 begin_task: Level: (5) ID = <10253> Status = 0 0 0 0 ok 2009-Mar-09 00:11:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:11:03 NOTE WAPPDATA-new_file: New FITS file: wapp.20090309.a2048.0000.fits 2009-Mar-09 00:11:03 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090309.a2048.0000.fits} 2009-Mar-09 00:11:04 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-09 00:11:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-09 00:11:04 LOG5 end_task: Level: (5) ID = <10253> Status = 0 0 0 0 ok 2009-Mar-09 00:11:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-09 00:11:04 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-09 00:11:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-09 00:11:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-09 00:11:04 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-09 00:11:04 LOG5 begin_task: Level: (5) ID = <10254> Status = 0 0 0 0 ok 2009-Mar-09 00:11:04 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-09 00:11:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-09 00:11:04 LOG5 end_task: Level: (5) ID = <10254> Status = 0 0 0 0 ok 2009-Mar-09 00:11:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-09 00:11:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-09 00:11:04 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-09 00:11:04 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2009-Mar-09 00:11:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Mar-09 00:11:04 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Mar-09 00:11:04 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Mar-09 00:11:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-09 00:11:04 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2009-Mar-09 00:11:04 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-09 00:11:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Mar-09 00:11:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-09 00:11:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-09 00:11:04 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2009-Mar-09 00:11:04 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-Mar-09 00:11:04 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-Mar-09 00:11:04 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-09 00:11:04 LOG5 begin_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2009-Mar-09 00:11:04 LOG5 log_alfabeam: Parameters: 9.8721944444444425 23.156444444444446 10.866771 2009.1861948944152 -89.700012 2009-Mar-09 00:11:04 LOG4 log_alfabeam: ALFABEAM 0 9.872194444444450 23.156444444444439 2009-Mar-09 00:11:04 LOG4 log_alfabeam: ALFABEAM 1 9.870142263534438 23.247652266263767 2009-Mar-09 00:11:04 LOG4 log_alfabeam: ALFABEAM 2 9.864776242595431 23.186666530802558 2009-Mar-09 00:11:04 LOG4 log_alfabeam: ALFABEAM 3 9.866860286987619 23.095350483951783 2009-Mar-09 00:11:04 LOG4 log_alfabeam: ALFABEAM 4 9.874284558358710 23.065651931171804 2009-Mar-09 00:11:04 LOG4 log_alfabeam: ALFABEAM 5 9.879609435404552 23.126150814097333 2009-Mar-09 00:11:04 LOG4 log_alfabeam: ALFABEAM 6 9.877550952762469 23.216835588779364 2009-Mar-09 00:11:04 INFO2 take_data: Starting WAPP scan: 906800001 2009-Mar-09 00:11:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Mar-09 00:11:04 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-09 00:11:04 LOG5 begin_task: Level: (5) ID = <10257> Status = 0 0 0 0 ok 2009-Mar-09 00:11:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-09 00:11:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 00:11:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 0.978 0.944 1.101 2009-Mar-09 00:11:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.892 1.023 0.933 0.946 2009-Mar-09 00:11:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.959 1.059 0.932 0.907 2009-Mar-09 00:11:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.016 0.111 1.118 0.121 2009-Mar-09 00:11:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15065.00 2009-Mar-09 00:11:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.184864 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-09 00:11:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.184864 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-09 00:11:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.184864 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-09 00:11:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.184864 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-09 00:11:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.184864 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-09 00:11:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.184864 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-09 00:11:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.184864 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-09 00:11:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.184864 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-09 00:11:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.184864 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-09 00:11:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-09 00:11:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-09 00:11:10 LOG5 end_task: Level: (5) ID = <10257> Status = 0 0 0 0 ok 2009-Mar-09 00:11:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-09 00:11:10 LOG5 end_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2009-Mar-09 00:11:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Mar-09 00:11:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-09 00:11:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-09 00:11:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-09 00:11:10 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2009-Mar-09 00:11:10 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-09 00:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:11:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-09 00:11:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-09 00:11:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-09 00:11:10 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2009-Mar-09 00:11:10 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-Mar-09 00:11:10 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-Mar-09 00:11:10 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-09 00:11:10 LOG5 begin_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2009-Mar-09 00:11:10 LOG5 log_alfabeam: Parameters: 9.8721944444444425 23.156444444444446 10.868442 2009.1861950845437 -89.700012 2009-Mar-09 00:11:10 LOG4 log_alfabeam: ALFABEAM 0 9.872194444444442 23.156444444444428 2009-Mar-09 00:11:10 LOG4 log_alfabeam: ALFABEAM 1 9.870138243335214 23.247634861084428 2009-Mar-09 00:11:10 LOG4 log_alfabeam: ALFABEAM 2 9.864774924580404 23.186604861953789 2009-Mar-09 00:11:10 LOG4 log_alfabeam: ALFABEAM 3 9.866862943293969 23.095306681258801 2009-Mar-09 00:11:10 LOG4 log_alfabeam: ALFABEAM 4 9.874288490932212 23.065668985365726 2009-Mar-09 00:11:10 LOG4 log_alfabeam: ALFABEAM 5 9.879610759144082 23.126212445924892 2009-Mar-09 00:11:10 LOG4 log_alfabeam: ALFABEAM 6 9.877548298833119 23.216880623229137 2009-Mar-09 00:11:10 INFO2 take_data: Starting WAPP scan: 906800002 2009-Mar-09 00:11:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Mar-09 00:11:11 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-09 00:11:11 LOG5 begin_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2009-Mar-09 00:11:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-09 00:11:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15072.00 2009-Mar-09 00:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.184864 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-09 00:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.184864 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-09 00:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.184864 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-09 00:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.184864 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-09 00:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.184864 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-09 00:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.184864 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-09 00:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.184864 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-09 00:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.184864 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-09 00:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.184864 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-09 00:11:17 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-Mar-09 00:11:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-09 00:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.463 (still bad) 2009-Mar-09 00:11:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-09 00:11:17 LOG5 end_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2009-Mar-09 00:11:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-09 00:11:17 LOG5 end_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2009-Mar-09 00:11:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Mar-09 00:11:17 STOP finish_task: Finishing task 'WAPP calibration' 2009-Mar-09 00:11:17 LOG5 finish_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2009-Mar-09 00:11:17 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Mar-09 00:11:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 00:11:17 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Mar-09 00:11:17 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2009-Mar-09 00:11:18 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-Mar-09 00:11:18 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 111.56 and ZA = 14.58 2009-Mar-09 00:11:18 LOG3 track_source: Calling 'track_source AGES3193_p2_030 111.56 14.5805487385 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Mar-09 00:11:18 START begin_task: Starting task 'sending tracking commands' 2009-Mar-09 00:11:18 LOG5 begin_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2009-Mar-09 00:11:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p2_030} INFO {Slewing to source 'AGES3193_p2_030' ...} 2009-Mar-09 00:11:18 INFO1 track_source: Starting to track AGES3193_p2_030 2009-Mar-09 00:11:18 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p2_030" 2009-Mar-09 00:11:18 LOG3 vw_send: To DATATAKING: set ra 111.56 2009-Mar-09 00:11:18 LOG3 vw_send: To DATATAKING: set dec 14.5805487385 2009-Mar-09 00:11:18 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-09 00:11:18 LOG3 vw_send: To DATATAKING: pnt tr 111.56 14.5805487385 -CF 2009-Mar-09 00:11:18 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Mar-09 00:11:18 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-09 00:11:18 LOG5 finish_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2009-Mar-09 00:11:18 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-09 00:11:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 00:11:18 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-09 00:11:18 LOG5 end_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2009-Mar-09 00:11:18 LOG1 fixed_driftmap: Parameters: HA = +00:58:59.4 Start = 10:52:32.8 LST = 10:52:13.4 diff = 19.4 secs 2009-Mar-09 00:11:18 INFO2 fixed_driftmap: Waiting 17.4 seconds for RA 9:53:33 2009-Mar-09 00:11:18 INFO2 lstwait: Waiting for 17.4 secs from LST 10:52:13 to LST 10:52:31 ... 2009-Mar-09 00:11:18 LOG4 send_obs_status: To obs_status: <1> TASKTIME 17.367185288975602 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Mar-09 00:11:18 START begin_task: Starting task 'waiting on wait on LST' 2009-Mar-09 00:11:18 LOG5 begin_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2009-Mar-09 00:11:18 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p2_030" 2009-Mar-09 00:11:18 LOG4 got_cormsg: From DATATAKING: set ra 111.56 2009-Mar-09 00:11:18 LOG4 got_cormsg: From DATATAKING: set dec 14.5805487385 2009-Mar-09 00:11:18 LOG4 got_cormsg: From DATATAKING: vw% 111.56 2009-Mar-09 00:11:18 LOG4 got_cormsg: From DATATAKING: vw% 14.5805487385 2009-Mar-09 00:11:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:11:18 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-09 00:11:18 LOG4 got_cormsg: From DATATAKING: pnt tr 111.56 14.5805487385 -CF 2009-Mar-09 00:11:18 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Mar-09 00:11:18 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-09 00:11:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 00:11:35 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Mar-09 00:11:35 LOG5 end_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2009-Mar-09 00:11:35 LOG4 lstwait: Finished waiting 0.64 seconds late 2009-Mar-09 00:11:35 INFO3 lstwait: Finished waiting 2009-Mar-09 00:11:35 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-09 00:11:35 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-Mar-09 00:11:35 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Mar-09 00:11:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-Mar-09 00:11:35 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Mar-09 00:11:35 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-Mar-09 00:11:35 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-09 00:11:35 LOG5 begin_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2009-Mar-09 00:11:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Mar-09 00:11:35 INFO2 take_data: Starting WAPP scan: 906800003 2009-Mar-09 00:11:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-Mar-09 00:11:36 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-09 00:11:36 LOG5 begin_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2009-Mar-09 00:11:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-09 00:11:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15097.00 2009-Mar-09 00:11:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.184864 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-09 00:11:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.184864 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-09 00:11:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.184864 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-09 00:11:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.184864 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-09 00:11:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.184864 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-09 00:11:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.184864 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-09 00:11:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.184864 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-09 00:11:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.184864 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-09 00:11:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.184864 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-09 00:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:12:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 00:12:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 0.978 0.939 1.100 2009-Mar-09 00:12:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.885 1.023 0.930 0.944 2009-Mar-09 00:12:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.961 1.059 0.939 0.932 2009-Mar-09 00:12:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.010 0.111 1.115 0.121 2009-Mar-09 00:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-Mar-09 00:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-09 00:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-09 00:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:13:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 00:13:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 0.975 0.939 1.097 2009-Mar-09 00:13:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.883 1.024 0.967 0.977 2009-Mar-09 00:13:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.962 1.062 0.928 0.918 2009-Mar-09 00:13:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.009 0.111 1.112 0.120 2009-Mar-09 00:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-Mar-09 00:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-Mar-09 00:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-09 00:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-Mar-09 00:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-Mar-09 00:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-Mar-09 00:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:14:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-09 00:14:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 0.974 0.938 1.097 2009-Mar-09 00:14:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.884 1.021 0.931 0.940 2009-Mar-09 00:14:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.962 1.059 0.929 0.920 2009-Mar-09 00:14:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 0.110 1.111 0.120 2009-Mar-09 00:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-Mar-09 00:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:15:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-09 00:15:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 0.975 0.937 1.092 2009-Mar-09 00:15:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.884 1.020 0.930 0.937 2009-Mar-09 00:15:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.970 1.071 0.930 0.917 2009-Mar-09 00:15:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.009 0.110 1.111 0.120 2009-Mar-09 00:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-09 00:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:16:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-09 00:16:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 0.972 0.936 1.091 2009-Mar-09 00:16:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.885 1.020 0.931 0.936 2009-Mar-09 00:16:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.959 1.060 0.930 0.920 2009-Mar-09 00:16:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 0.110 1.110 0.120 2009-Mar-09 00:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.104 (still bad) 2009-Mar-09 00:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:17:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-09 00:17:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 0.969 0.936 1.090 2009-Mar-09 00:17:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.881 1.019 0.929 0.936 2009-Mar-09 00:17:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.961 1.062 0.927 0.895 2009-Mar-09 00:17:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 0.110 1.108 0.119 2009-Mar-09 00:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:17:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-09 00:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-Mar-09 00:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-Mar-09 00:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-Mar-09 00:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:18:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-09 00:18:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 0.972 0.938 1.088 2009-Mar-09 00:18:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.882 1.015 0.929 0.936 2009-Mar-09 00:18:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.958 1.056 0.929 0.889 2009-Mar-09 00:18:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.004 0.110 1.108 0.119 2009-Mar-09 00:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-Mar-09 00:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-Mar-09 00:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-Mar-09 00:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-Mar-09 00:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-Mar-09 00:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-Mar-09 00:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-Mar-09 00:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:19:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-09 00:19:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 0.972 0.934 1.084 2009-Mar-09 00:19:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.881 1.013 0.928 0.932 2009-Mar-09 00:19:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.960 1.057 0.927 0.917 2009-Mar-09 00:19:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.004 0.110 1.108 0.119 2009-Mar-09 00:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-Mar-09 00:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:19:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Mar-09 00:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:20:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-09 00:20:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 0.973 0.935 1.086 2009-Mar-09 00:20:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.881 1.014 0.929 0.933 2009-Mar-09 00:20:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.950 1.051 0.929 0.917 2009-Mar-09 00:20:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 0.110 1.108 0.119 2009-Mar-09 00:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:21:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-09 00:21:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 0.975 0.935 1.090 2009-Mar-09 00:21:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.879 1.010 0.929 0.937 2009-Mar-09 00:21:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.955 1.054 0.928 0.922 2009-Mar-09 00:21:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.006 0.110 1.109 0.120 2009-Mar-09 00:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-Mar-09 00:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:22:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-09 00:22:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 0.976 0.939 1.092 2009-Mar-09 00:22:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.882 1.014 0.928 0.942 2009-Mar-09 00:22:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.953 1.049 0.929 0.922 2009-Mar-09 00:22:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.003 0.110 1.108 0.119 2009-Mar-09 00:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-Mar-09 00:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:23:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-09 00:23:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 0.976 0.935 1.087 2009-Mar-09 00:23:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.878 1.016 0.927 0.940 2009-Mar-09 00:23:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.952 1.049 0.928 0.919 2009-Mar-09 00:23:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.011 0.110 1.115 0.119 2009-Mar-09 00:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-Mar-09 00:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-Mar-09 00:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Mar-09 00:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Mar-09 00:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Mar-09 00:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Mar-09 00:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Mar-09 00:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-Mar-09 00:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-Mar-09 00:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.113 (still bad) 2009-Mar-09 00:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-09 00:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.117 (still bad) 2009-Mar-09 00:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-Mar-09 00:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Mar-09 00:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Mar-09 00:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-Mar-09 00:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-09 00:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-09 00:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-Mar-09 00:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Mar-09 00:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Mar-09 00:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Mar-09 00:24:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-09 00:24:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 0.975 0.940 1.090 2009-Mar-09 00:24:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.883 1.016 0.927 0.936 2009-Mar-09 00:24:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.949 1.050 0.925 0.921 2009-Mar-09 00:24:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.110 1.139 0.119 2009-Mar-09 00:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Mar-09 00:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Mar-09 00:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Mar-09 00:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Mar-09 00:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-Mar-09 00:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.118 (still bad) 2009-Mar-09 00:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-09 00:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-09 00:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-09 00:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-Mar-09 00:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-Mar-09 00:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.111 (still bad) 2009-Mar-09 00:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:25:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-09 00:25:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 0.974 0.936 1.088 2009-Mar-09 00:25:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.883 1.014 0.927 0.934 2009-Mar-09 00:25:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.946 1.048 0.922 0.916 2009-Mar-09 00:25:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.003 0.110 1.107 0.119 2009-Mar-09 00:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-Mar-09 00:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-Mar-09 00:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-Mar-09 00:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-Mar-09 00:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-Mar-09 00:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-Mar-09 00:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-Mar-09 00:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-Mar-09 00:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-Mar-09 00:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-Mar-09 00:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-Mar-09 00:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-Mar-09 00:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-Mar-09 00:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-Mar-09 00:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-Mar-09 00:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-Mar-09 00:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-Mar-09 00:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:26:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-09 00:26:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 0.967 0.934 1.088 2009-Mar-09 00:26:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.881 1.014 0.927 0.933 2009-Mar-09 00:26:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.949 1.051 0.924 0.911 2009-Mar-09 00:26:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.001 0.110 1.105 0.119 2009-Mar-09 00:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-Mar-09 00:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-Mar-09 00:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-Mar-09 00:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-Mar-09 00:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-Mar-09 00:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-Mar-09 00:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-Mar-09 00:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-Mar-09 00:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-Mar-09 00:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-Mar-09 00:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-Mar-09 00:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-Mar-09 00:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-Mar-09 00:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-Mar-09 00:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-Mar-09 00:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-Mar-09 00:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:27:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-09 00:27:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.067 0.969 0.932 1.086 2009-Mar-09 00:27:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.880 1.014 0.927 0.935 2009-Mar-09 00:27:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.951 1.051 0.925 0.912 2009-Mar-09 00:27:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.000 0.110 1.104 0.119 2009-Mar-09 00:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-Mar-09 00:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-Mar-09 00:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-Mar-09 00:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-Mar-09 00:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:27:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-09 00:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.109 (still bad) 2009-Mar-09 00:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-09 00:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-09 00:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.107 (still bad) 2009-Mar-09 00:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.109 (still bad) 2009-Mar-09 00:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-Mar-09 00:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-Mar-09 00:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:28:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-09 00:28:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 0.974 0.936 1.085 2009-Mar-09 00:28:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.885 1.021 0.927 0.933 2009-Mar-09 00:28:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.952 1.049 0.928 0.912 2009-Mar-09 00:28:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.998 0.110 1.103 0.119 2009-Mar-09 00:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-Mar-09 00:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-Mar-09 00:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-Mar-09 00:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-Mar-09 00:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-Mar-09 00:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.102 (still bad) 2009-Mar-09 00:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-Mar-09 00:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-Mar-09 00:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-Mar-09 00:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-Mar-09 00:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-Mar-09 00:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-Mar-09 00:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-Mar-09 00:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-Mar-09 00:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-Mar-09 00:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.105 (still bad) 2009-Mar-09 00:29:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-09 00:29:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 0.973 0.934 1.085 2009-Mar-09 00:29:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.882 1.014 0.930 0.935 2009-Mar-09 00:29:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.950 1.049 0.924 0.908 2009-Mar-09 00:29:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.999 0.110 1.103 0.119 2009-Mar-09 00:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-Mar-09 00:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-Mar-09 00:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-Mar-09 00:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-Mar-09 00:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.100 (still bad) 2009-Mar-09 00:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-Mar-09 00:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.101 (still bad) 2009-Mar-09 00:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.102 (still bad) 2009-Mar-09 00:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.103 (still bad) 2009-Mar-09 00:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.105 (still bad) 2009-Mar-09 00:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-Mar-09 00:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-Mar-09 00:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-Mar-09 00:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-Mar-09 00:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.106 (still bad) 2009-Mar-09 00:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.110 (still bad) 2009-Mar-09 00:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.115 (still bad) 2009-Mar-09 00:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.124 (still bad) 2009-Mar-09 00:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Mar-09 00:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-Mar-09 00:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.143 (still bad) 2009-Mar-09 00:30:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-09 00:30:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 0.971 0.934 1.086 2009-Mar-09 00:30:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.879 1.012 0.927 0.933 2009-Mar-09 00:30:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.956 1.055 0.924 0.912 2009-Mar-09 00:30:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 0.110 1.144 0.119 2009-Mar-09 00:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2009-Mar-09 00:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Mar-09 00:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Mar-09 00:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-Mar-09 00:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-Mar-09 00:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.116 (still bad) 2009-Mar-09 00:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.119 (still bad) 2009-Mar-09 00:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-Mar-09 00:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Mar-09 00:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Mar-09 00:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Mar-09 00:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.131 (still bad) 2009-Mar-09 00:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Mar-09 00:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2009-Mar-09 00:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.117 (still bad) 2009-Mar-09 00:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.112 (still bad) 2009-Mar-09 00:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.107 (still bad) 2009-Mar-09 00:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.103 (still bad) 2009-Mar-09 00:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-Mar-09 00:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.101 (still bad) 2009-Mar-09 00:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.108 (still bad) 2009-Mar-09 00:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.113 (still bad) 2009-Mar-09 00:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.120 (still bad) 2009-Mar-09 00:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-Mar-09 00:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-Mar-09 00:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-Mar-09 00:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.114 (still bad) 2009-Mar-09 00:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.108 (still bad) 2009-Mar-09 00:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.104 (still bad) 2009-Mar-09 00:31:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Mar-09 00:31:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 0.978 0.940 1.093 2009-Mar-09 00:31:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.885 1.019 0.924 0.929 2009-Mar-09 00:31:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.947 1.049 0.920 0.907 2009-Mar-09 00:31:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.998 0.109 1.102 0.119 2009-Mar-09 00:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-Mar-09 00:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-Mar-09 00:31:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-09 00:31:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-09 00:31:37 LOG5 end_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2009-Mar-09 00:31:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-09 00:31:37 LOG5 end_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2009-Mar-09 00:31:37 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Mar-09 00:31:37 LOG5 finish_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2009-Mar-09 00:31:37 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-Mar-09 00:31:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-09 00:31:37 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-Mar-09 00:31:37 LOG5 end_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2009-Mar-09 00:31:37 COMMAND run_command_line: EXECUTING command 33: 'ENDIF' 2009-Mar-09 00:31:37 NOTE run_command_file: DONE with command file processing 2009-Mar-09 00:31:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Mar-09 00:31:37 STOP finish_task: Finishing task 'running command file '090308.cmd'' 2009-Mar-09 00:31:37 LOG5 finish_task: Level: (1) ID = <10117> Status = 0 0 0 0 ok 2009-Mar-09 00:31:37 DONE finish_task: DONE finished running: command file '090308.cmd' 2009-Mar-09 00:31:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-09 00:31:37 END end_task: Finishing task 'running command file '090308.cmd'' with status 'OK' 2009-Mar-09 00:31:38 LOG5 end_task: Level: (1) ID = <10117> Status = 0 0 0 0 ok 2009-Mar-09 00:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.100 (still bad) 2009-Mar-09 00:31:56 INFO1 CIMA-run_command_file: Transferring command file '090309.cmd ' to executive ... 2009-Mar-09 00:31:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 3 {LOAD ages_config.conf} 2009-Mar-09 00:31:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 4 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2009-Mar-09 00:31:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 5 {CATALOG AGESFull.cat} 2009-Mar-09 00:31:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {IF LSTSLEW(AGESVC1A_p1_023) < 112929 THEN} 2009-Mar-09 00:31:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {FIXEDDRIFT az=314.40 alfaangle=58.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p1_023 ra=120900.00 dec=82700.00} 2009-Mar-09 00:31:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {ENDIF} 2009-Mar-09 00:31:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 15 {IF LSTSLEW(AGESVC1B_p2_047) < 115329 THEN} 2009-Mar-09 00:31:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 16 {FIXEDDRIFT az=319.17 alfaangle=53.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_047 ra=122900.00 dec=75100.00} 2009-Mar-09 00:31:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 19 {ENDIF} 2009-Mar-09 00:31:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 22 {IF LSTSLEW(AGESVC1B_p2_049) < 121629 THEN} 2009-Mar-09 00:31:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 23 {FIXEDDRIFT az=342.98 alfaangle=33.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_049 ra=122900.00 dec=74800.00} 2009-Mar-09 00:31:56 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 26 {ENDIF} 2009-Mar-09 00:31:56 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Mar-09 00:31:56 LOG4 exec_msg: From OBSERVER: run_command_file 090309.cmd 1 1 12 2009-Mar-09 00:31:56 LOG4 run_command_file: Calling 'run_command_file 090309.cmd 1 1 12' 2009-Mar-09 00:31:56 BEGIN begin_task: Starting task 'running command file '090309.cmd'' 2009-Mar-09 00:31:56 LOG5 begin_task: Level: (1) ID = <10265> Status = 0 0 0 0 ok 2009-Mar-09 00:31:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '090309.cmd' ...} 2009-Mar-09 00:31:56 NOTE run_command_file: Starting execution of command file '090309.cmd' from line 1 2009-Mar-09 00:31:56 COMMAND run_command_line: EXECUTING command 3: 'LOAD ages_config.conf' 2009-Mar-09 00:31:56 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Mar-09 00:31:56 NOTE CIMA-check_config_file: File 'ages_config.conf' contains an ALFA set-up which will be ignored! 2009-Mar-09 00:31:56 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-09 00:31:56 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Mar-09 00:31:56 NOTE CIMA-load_config_file: Loading configuration file 'ages_config.conf' 2009-Mar-09 00:31:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Mar-09 00:31:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Mar-09 00:31:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Mar-09 00:31:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Mar-09 00:31:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Mar-09 00:31:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Mar-09 00:31:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Mar-09 00:31:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2009-Mar-09 00:31:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2009-Mar-09 00:31:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2009-Mar-09 00:31:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2009-Mar-09 00:31:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2009-Mar-09 00:31:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2009-Mar-09 00:31:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2009-Mar-09 00:31:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2009-Mar-09 00:31:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2009-Mar-09 00:31:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Mar-09 00:31:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Mar-09 00:31:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Mar-09 00:31:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Mar-09 00:31:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Mar-09 00:31:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Mar-09 00:31:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Mar-09 00:31:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Mar-09 00:31:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Mar-09 00:31:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Mar-09 00:31:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Mar-09 00:31:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Mar-09 00:31:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Mar-09 00:31:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Mar-09 00:31:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Mar-09 00:31:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Mar-09 00:31:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Mar-09 00:31:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Mar-09 00:31:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Mar-09 00:31:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Mar-09 00:31:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Mar-09 00:31:59 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-09 00:31:59 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Mar-09 00:31:59 LOG5 begin_task: Level: (2) ID = <10266> Status = 0 0 0 0 ok 2009-Mar-09 00:31:59 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Mar-09 00:31:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Mar-09 00:31:59 LOG1 config_iflo: Receiver ALFA already selected 2009-Mar-09 00:31:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-09 00:31:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-09 00:31:59 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-09 00:31:59 LOG5 begin_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2009-Mar-09 00:31:59 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-09 00:31:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-09 00:31:59 LOG5 end_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2009-Mar-09 00:31:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-09 00:31:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-09 00:31:59 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Mar-09 00:31:59 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Mar-09 00:31:59 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Mar-09 00:31:59 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Mar-09 00:31:59 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Mar-09 00:31:59 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Mar-09 00:31:59 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Mar-09 00:31:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2009-Mar-09 00:31:59 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Mar-09 00:31:59 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Mar-09 00:31:59 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Mar-09 00:31:59 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Mar-09 00:31:59 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Mar-09 00:31:59 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Mar-09 00:31:59 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Mar-09 00:31:59 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Mar-09 00:31:59 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Mar-09 00:31:59 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Mar-09 00:31:59 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Mar-09 00:31:59 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Mar-09 00:31:59 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Mar-09 00:31:59 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Mar-09 00:31:59 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Mar-09 00:31:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-09 00:31:59 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Mar-09 00:31:59 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Mar-09 00:31:59 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Mar-09 00:31:59 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Mar-09 00:31:59 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Mar-09 00:31:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Mar-09 00:31:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-09 00:31:59 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Mar-09 00:31:59 LOG5 begin_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2009-Mar-09 00:31:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2009-Mar-09 00:31:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Mar-09 00:31:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-09 00:31:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-09 00:32:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:32:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:32:00 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Mar-09 00:32:00 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Mar-09 00:32:00 LOG5 end_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2009-Mar-09 00:32:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Mar-09 00:32:00 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Mar-09 00:32:00 LOG5 finish_task: Level: (2) ID = <10266> Status = 0 0 0 0 ok 2009-Mar-09 00:32:00 DONE finish_task: DONE finished configuration: IF/LO path 2009-Mar-09 00:32:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-09 00:32:00 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Mar-09 00:32:01 LOG5 end_task: Level: (2) ID = <10266> Status = 0 0 0 0 ok 2009-Mar-09 00:32:01 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Mar-09 00:32:01 LOG5 begin_task: Level: (2) ID = <10269> Status = 0 0 0 0 ok 2009-Mar-09 00:32:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Mar-09 00:32:01 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Mar-09 00:32:01 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Mar-09 00:32:01 START begin_task: Starting task 'selecting calibration port' 2009-Mar-09 00:32:01 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2009-Mar-09 00:32:01 LOG3 vw_send: To DATATAKING: calport 3 2009-Mar-09 00:32:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Mar-09 00:32:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-09 00:32:01 START begin_task: Starting task 'waiting on calport' 2009-Mar-09 00:32:01 LOG5 begin_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2009-Mar-09 00:32:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:32:01 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Mar-09 00:32:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-09 00:32:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:32:01 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-09 00:32:01 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Mar-09 00:32:01 LOG5 end_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2009-Mar-09 00:32:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Mar-09 00:32:01 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Mar-09 00:32:01 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2009-Mar-09 00:32:01 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-09 00:32:01 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-09 00:32:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-09 00:32:01 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2009-Mar-09 00:32:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:32:01 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-09 00:32:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-09 00:32:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-09 00:32:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-09 00:32:01 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2009-Mar-09 00:32:01 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Mar-09 00:32:01 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Mar-09 00:32:01 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Mar-09 00:32:01 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Mar-09 00:32:01 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Mar-09 00:32:01 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Mar-09 00:32:01 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Mar-09 00:32:01 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Mar-09 00:32:01 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2009-Mar-09 00:32:01 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2009-Mar-09 00:32:01 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2009-Mar-09 00:32:01 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2009-Mar-09 00:32:01 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Mar-09 00:32:01 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Mar-09 00:32:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-09 00:32:01 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2009-Mar-09 00:32:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Mar-09 00:32:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Mar-09 00:32:01 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-09 00:32:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Mar-09 00:32:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-09 00:32:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-09 00:32:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-09 00:32:01 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2009-Mar-09 00:32:01 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Mar-09 00:32:02 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Mar-09 00:32:02 LOG5 finish_task: Level: (2) ID = <10269> Status = 0 0 0 0 ok 2009-Mar-09 00:32:02 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Mar-09 00:32:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-09 00:32:02 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Mar-09 00:32:02 LOG5 end_task: Level: (2) ID = <10269> Status = 0 0 0 0 ok 2009-Mar-09 00:32:02 COMMAND run_command_line: EXECUTING command 4: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2009-Mar-09 00:32:02 COMMAND run_command_line: EXECUTING command 5: 'CATALOG AGESFull.cat' 2009-Mar-09 00:32:02 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2009-Mar-09 00:32:02 COMMAND run_command_line: EXECUTING command 8: 'IF LSTSLEW(AGESVC1A_p1_023) < 112929 THEN' 2009-Mar-09 00:32:02 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1A_p1_023) < 112929 2009-Mar-09 00:32:02 INFO5 is_if_valid: Condition parsed as: 11.350227333333333 < 11.491388888888888 2009-Mar-09 00:32:02 COMMAND run_command_line: EXECUTING command 9: 'FIXEDDRIFT az=314.40 alfaangle=58.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1A_p1_023 ra=120900.00 dec=82700.00' 2009-Mar-09 00:32:02 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-Mar-09 00:32:02 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Mar-09 00:32:02 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-09 00:32:02 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 314.40 58.0 hcorcal 5 tracking no first 1 AGESVC1A_p1_023 120900.00 82700.00 J 8500.0 Heliocentric velocity(optical)' 2009-Mar-09 00:32:02 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Mar-09 00:32:02 LOG5 begin_task: Level: (2) ID = <10274> Status = 0 0 0 0 ok 2009-Mar-09 00:32:02 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGES3193_p2_030' 2009-Mar-09 00:32:02 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Mar-09 00:32:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1A_p1_023} 2009-Mar-09 00:32:02 INFO3 fixed_driftmap: Sending telescope to Az = 314.40 and ZA = 13.91 2009-Mar-09 00:32:02 LOG3 track_source: Calling 'track_source AGESVC1A_p1_023 314.40 13.9111815156 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Mar-09 00:32:02 START begin_task: Starting task 'sending tracking commands' 2009-Mar-09 00:32:02 LOG5 begin_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2009-Mar-09 00:32:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p1_023} INFO {Slewing to source 'AGESVC1A_p1_023' ...} 2009-Mar-09 00:32:03 INFO1 track_source: Starting to track AGESVC1A_p1_023 2009-Mar-09 00:32:03 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p1_023" 2009-Mar-09 00:32:03 LOG3 vw_send: To DATATAKING: set ra 314.40 2009-Mar-09 00:32:03 LOG3 vw_send: To DATATAKING: set dec 13.9111815156 2009-Mar-09 00:32:03 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-09 00:32:03 LOG3 vw_send: To DATATAKING: pnt tr 314.40 13.9111815156 -CF 2009-Mar-09 00:32:03 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Mar-09 00:32:03 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-09 00:32:03 LOG5 finish_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2009-Mar-09 00:32:03 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-09 00:32:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 00:32:03 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-09 00:32:03 LOG5 end_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2009-Mar-09 00:32:03 START begin_task: Starting task 'rotate ALFA to +58 degrees' 2009-Mar-09 00:32:03 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2009-Mar-09 00:32:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +58 degrees ...} 2009-Mar-09 00:32:03 INFO2 rotate_alfa: ALFA commanded to +58.0 degrees 2009-Mar-09 00:32:03 LOG3 sock_errsend: To ALFAMOTOR: POSITION 58.0 REPLY 2009-Mar-09 00:32:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Mar-09 00:32:03 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Mar-09 00:32:03 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2009-Mar-09 00:32:03 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p1_023" 2009-Mar-09 00:32:03 LOG4 got_cormsg: From DATATAKING: set ra 314.40 2009-Mar-09 00:32:03 LOG4 got_cormsg: From DATATAKING: set dec 13.9111815156 2009-Mar-09 00:32:03 LOG4 got_cormsg: From DATATAKING: vw% 314.40 2009-Mar-09 00:32:03 LOG4 got_cormsg: From DATATAKING: vw% 13.9111815156 2009-Mar-09 00:32:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:32:03 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-09 00:32:03 LOG4 got_cormsg: From DATATAKING: pnt tr 314.40 13.9111815156 -CF 2009-Mar-09 00:32:03 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Mar-09 00:32:03 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-09 00:32:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:33:25 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Mar-09 00:33:25 INFO3 alfa_motor: ALFA rotator in-position +58.00 degrees 2009-Mar-09 00:33:25 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Mar-09 00:33:25 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2009-Mar-09 00:33:25 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-09 00:33:25 STOP finish_task: Finishing task 'rotate ALFA to +58 degrees' 2009-Mar-09 00:33:25 LOG5 finish_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2009-Mar-09 00:33:25 INFO2 finish_task: DONE finished configuration: rotating ALFA to +58 degrees 2009-Mar-09 00:33:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 00:33:26 STOP end_task: Finishing task 'rotate ALFA to +58 degrees' with status 'OK' 2009-Mar-09 00:33:26 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2009-Mar-09 00:33:26 START begin_task: Starting task 'waiting on telescope' 2009-Mar-09 00:33:26 LOG5 begin_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2009-Mar-09 00:33:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Mar-09 00:33:26 LOG3 waittrk: Start waittrk 5 2009-Mar-09 00:33:26 START begin_task: Starting task 'waiting on telescope movement' 2009-Mar-09 00:33:26 LOG5 begin_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2009-Mar-09 00:33:31 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Mar-09 00:33:31 LOG5 end_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2009-Mar-09 00:33:31 START begin_task: Starting task 'waiting on telescope on source' 2009-Mar-09 00:33:31 LOG5 begin_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2009-Mar-09 00:40:26 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Mar-09 00:40:26 LOG5 end_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2009-Mar-09 00:40:26 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-09 00:40:26 INFO2 waittrk: Now tracking AGESVC1A_p1_023 2009-Mar-09 00:40:26 LOG4 waittrk: Current telescope position: Az = 314.01 ZA = 13.90 2009-Mar-09 00:40:26 STOP finish_task: Finishing task 'waiting on telescope' 2009-Mar-09 00:40:26 LOG5 finish_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2009-Mar-09 00:40:26 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Mar-09 00:40:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 00:40:26 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Mar-09 00:40:26 LOG5 end_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2009-Mar-09 00:40:26 START begin_task: Starting task 'selecting calibration type' 2009-Mar-09 00:40:26 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2009-Mar-09 00:40:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-09 00:40:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-09 00:40:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-09 00:40:26 START begin_task: Starting task 'waiting on setcal' 2009-Mar-09 00:40:26 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2009-Mar-09 00:40:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-09 00:40:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-09 00:40:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:40:26 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-09 00:40:26 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-09 00:40:26 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2009-Mar-09 00:40:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-09 00:40:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-09 00:40:26 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-09 00:40:26 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-09 00:40:26 LOG5 begin_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2009-Mar-09 00:40:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:40:27 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-09 00:40:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-09 00:40:27 LOG5 end_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2009-Mar-09 00:40:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-09 00:40:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-09 00:40:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-09 00:40:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-09 00:40:27 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-09 00:40:27 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2009-Mar-09 00:40:27 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-09 00:40:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-09 00:40:27 LOG5 end_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2009-Mar-09 00:40:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-09 00:40:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-09 00:40:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-09 00:40:27 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2009-Mar-09 00:40:27 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-Mar-09 00:40:27 INFO2 astwait: Waiting for 421 seconds from 04:40:27 to 04:47:28 UTC ... 2009-Mar-09 00:40:27 LOG4 send_obs_status: To obs_status: <1> TASKTIME 421 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Mar-09 00:40:27 START begin_task: Starting task 'waiting on waiting for AST time' 2009-Mar-09 00:40:27 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2009-Mar-09 00:47:28 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-Mar-09 00:47:28 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2009-Mar-09 00:47:28 INFO3 astwait: Finished waiting 2009-Mar-09 00:47:28 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-09 00:47:28 LOG5 dopset_later: Calling 'dopset_later 61.054422233489703' 2009-Mar-09 00:47:28 INFO3 dopset_later: Setting Doppler correction for 00:48:28 (61.1 seconds from now) 2009-Mar-09 00:47:28 LOG5 antvel: Calling 'antvel 314.400000 13.911182 F 61.054422233489703' 2009-Mar-09 00:47:28 LOG2 antvel: Transforming current Az = 314.40 ZA = 13.91 to apparent RA = 12:09:30.2 Dec = +08:23:41.4 2009-Mar-09 00:47:28 LOG2 antvel: Parameters to Doppler: Heliocentric 17308 2009 68 0.0 2009-Mar-09 00:47:28 INFO5 antvel: Computed antenna velocity: -5.69252 km/s 2009-Mar-09 00:47:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-5.692519163 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-Mar-09 00:47:28 INFO4 dopset_gen: New sky frequencies: 1381.269656 1381.269656 1381.269656 1381.269656 1381.269656 1381.269656 1381.269656 1381.269656 1381.269656 2009-Mar-09 00:47:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.269656 sky0=1381.269656 sky1=1381.269656 sky2=1381.269656 sky3=1381.269656 sky4=1381.269656 sky5=1381.269656 sky6=1381.269656 sky7=1381.269656 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-09 00:47:28 LOG2 dopset_gen: Result from 'sky2syn': 1631.269656 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-09 00:47:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631269656.0} 2009-Mar-09 00:47:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-09 00:47:28 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-Mar-09 00:47:28 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-Mar-09 00:47:28 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:08:03.9 Dec = +08:26:45.4 2009-Mar-09 00:47:28 LOG3 track_source: Calling 'track_source AGESVC1A_p1_023 120803.9 082645.4 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Mar-09 00:47:28 START begin_task: Starting task 'sending tracking commands' 2009-Mar-09 00:47:28 LOG5 begin_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2009-Mar-09 00:47:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p1_023} INFO {Slewing to source 'AGESVC1A_p1_023' ...} 2009-Mar-09 00:47:28 INFO1 track_source: Starting to track AGESVC1A_p1_023 2009-Mar-09 00:47:28 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p1_023" 2009-Mar-09 00:47:28 LOG3 vw_send: To DATATAKING: set ra 120803.9 2009-Mar-09 00:47:28 LOG3 vw_send: To DATATAKING: set dec 082645.4 2009-Mar-09 00:47:28 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-09 00:47:28 LOG3 vw_send: To DATATAKING: pnt tr 120803.9 082645.4 -CJ 2009-Mar-09 00:47:28 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Mar-09 00:47:28 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-09 00:47:28 LOG5 finish_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2009-Mar-09 00:47:28 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-09 00:47:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 00:47:28 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-09 00:47:28 LOG5 end_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2009-Mar-09 00:47:28 START begin_task: Starting task 'waiting on telescope' 2009-Mar-09 00:47:28 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2009-Mar-09 00:47:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Mar-09 00:47:28 LOG3 waittrk: Start waittrk 5 2009-Mar-09 00:47:28 START begin_task: Starting task 'waiting on telescope movement' 2009-Mar-09 00:47:28 LOG5 begin_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2009-Mar-09 00:47:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631269656.0} 2009-Mar-09 00:47:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-09 00:47:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:47:28 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p1_023" 2009-Mar-09 00:47:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:47:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:47:28 LOG4 got_cormsg: From DATATAKING: set ra 120803.9 2009-Mar-09 00:47:28 LOG4 got_cormsg: From DATATAKING: set dec 082645.4 2009-Mar-09 00:47:28 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-09 00:47:28 LOG4 got_cormsg: From DATATAKING: pnt tr 120803.9 082645.4 -CJ 2009-Mar-09 00:47:28 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Mar-09 00:47:28 LOG4 got_cormsg: From DATATAKING: 120803.9 2009-Mar-09 00:47:28 LOG4 got_cormsg: From DATATAKING: vw% 082645.4 2009-Mar-09 00:47:28 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2009-Mar-09 00:47:33 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Mar-09 00:47:33 LOG5 end_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2009-Mar-09 00:47:33 START begin_task: Starting task 'waiting on telescope on source' 2009-Mar-09 00:47:33 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2009-Mar-09 00:47:35 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Mar-09 00:47:35 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2009-Mar-09 00:47:35 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-09 00:47:35 INFO2 waittrk: Now tracking AGESVC1A_p1_023 2009-Mar-09 00:47:35 LOG4 waittrk: Current telescope position: Az = 314.07 ZA = 13.89 2009-Mar-09 00:47:35 STOP finish_task: Finishing task 'waiting on telescope' 2009-Mar-09 00:47:35 LOG5 finish_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2009-Mar-09 00:47:35 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Mar-09 00:47:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 00:47:35 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Mar-09 00:47:35 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2009-Mar-09 00:47:35 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-09 00:47:35 LOG5 begin_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2009-Mar-09 00:47:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Mar-09 00:47:35 INFO2 adjust_power: Starting to adjust WAPP power 2009-Mar-09 00:47:35 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Mar-09 00:47:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Mar-09 00:47:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-09 00:47:35 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Mar-09 00:47:35 LOG5 begin_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2009-Mar-09 00:47:36 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Mar-09 00:47:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-09 00:47:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:47:39 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-09 00:47:39 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Mar-09 00:47:39 LOG5 end_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2009-Mar-09 00:47:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Mar-09 00:47:39 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-09 00:47:39 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2009-Mar-09 00:47:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Mar-09 00:47:39 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-09 00:47:39 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-09 00:47:39 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-09 00:47:39 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-09 00:47:39 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Mar-09 00:47:39 LOG5 begin_task: Level: (5) ID = <10293> Status = 0 0 0 0 ok 2009-Mar-09 00:47:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Mar-09 00:47:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:47:40 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 7 7 dB 2009-Mar-09 00:47:40 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 3 dB 2009-Mar-09 00:47:40 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 7 4 dB --- beam 3: 4 3 dB 2009-Mar-09 00:47:40 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Mar-09 00:47:40 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Mar-09 00:47:40 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Mar-09 00:47:40 LOG5 end_task: Level: (5) ID = <10293> Status = 0 0 0 0 ok 2009-Mar-09 00:47:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.037 0.973 ALFA beam 1: 0.933 0.931 2009-Mar-09 00:47:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.914 1.086 ALFA beam 3: 0.948 0.923 2009-Mar-09 00:47:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.950 1.006 ALFA beam 5: 1.104 1.094 2009-Mar-09 00:47:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.968 0.110 ALFA beam 7: 1.071 0.120 2009-Mar-09 00:47:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-09 00:47:40 LOG5 finish_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2009-Mar-09 00:47:40 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Mar-09 00:47:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 00:47:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-09 00:47:40 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2009-Mar-09 00:47:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Mar-09 00:47:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-09 00:47:40 LOG5 finish_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2009-Mar-09 00:47:40 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Mar-09 00:47:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 00:47:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-09 00:47:40 LOG5 end_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2009-Mar-09 00:47:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2009-Mar-09 00:47:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2009-Mar-09 00:47:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2009-Mar-09 00:47:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2009-Mar-09 00:47:40 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-Mar-09 00:47:40 START begin_task: Starting task 'WAPP calibration' 2009-Mar-09 00:47:40 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2009-Mar-09 00:47:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Mar-09 00:47:40 START begin_task: Starting task 'selecting calibration type' 2009-Mar-09 00:47:40 LOG5 begin_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2009-Mar-09 00:47:40 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-09 00:47:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-09 00:47:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-09 00:47:40 START begin_task: Starting task 'waiting on setcal' 2009-Mar-09 00:47:40 LOG5 begin_task: Level: (5) ID = <10296> Status = 0 0 0 0 ok 2009-Mar-09 00:47:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Mar-09 00:47:40 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-09 00:47:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-09 00:47:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:47:41 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-09 00:47:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-09 00:47:41 LOG5 end_task: Level: (5) ID = <10296> Status = 0 0 0 0 ok 2009-Mar-09 00:47:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-09 00:47:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-09 00:47:41 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-09 00:47:41 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-09 00:47:41 LOG5 begin_task: Level: (5) ID = <10297> Status = 0 0 0 0 ok 2009-Mar-09 00:47:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:47:41 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-09 00:47:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-09 00:47:41 LOG5 end_task: Level: (5) ID = <10297> Status = 0 0 0 0 ok 2009-Mar-09 00:47:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-09 00:47:41 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-09 00:47:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-09 00:47:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-09 00:47:41 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-09 00:47:41 LOG5 begin_task: Level: (5) ID = <10298> Status = 0 0 0 0 ok 2009-Mar-09 00:47:41 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-09 00:47:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-09 00:47:41 LOG5 end_task: Level: (5) ID = <10298> Status = 0 0 0 0 ok 2009-Mar-09 00:47:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-09 00:47:41 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-09 00:47:41 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-09 00:47:41 LOG5 end_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2009-Mar-09 00:47:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Mar-09 00:47:41 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Mar-09 00:47:41 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Mar-09 00:47:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-09 00:47:41 LOG5 begin_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2009-Mar-09 00:47:41 NOTE WAPPDATA-new_file: New FITS file: wapp.20090309.a2048.0001.fits 2009-Mar-09 00:47:41 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-09 00:47:41 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090309.a2048.0001.fits} 2009-Mar-09 00:47:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Mar-09 00:47:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-09 00:47:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-09 00:47:41 LOG5 end_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2009-Mar-09 00:47:41 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-Mar-09 00:47:41 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-Mar-09 00:47:41 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-09 00:47:41 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2009-Mar-09 00:47:41 LOG5 log_alfabeam: Parameters: 12.134416666666665 8.4459444444444429 11.478441 2009.186264481456 57.999950 2009-Mar-09 00:47:41 LOG4 log_alfabeam: ALFABEAM 0 12.134416666666663 8.445944444444452 2009-Mar-09 00:47:41 LOG4 log_alfabeam: ALFABEAM 1 12.132167348066597 8.543852528907845 2009-Mar-09 00:47:41 LOG4 log_alfabeam: ALFABEAM 2 12.127875986178289 8.479065387978650 2009-Mar-09 00:47:41 LOG4 log_alfabeam: ALFABEAM 3 12.130082846636373 8.380941801299661 2009-Mar-09 00:47:41 LOG4 log_alfabeam: ALFABEAM 4 12.136630791602007 8.347737968729833 2009-Mar-09 00:47:41 LOG4 log_alfabeam: ALFABEAM 5 12.140979020129651 8.413343142239899 2009-Mar-09 00:47:41 LOG4 log_alfabeam: ALFABEAM 6 12.138722420357876 8.511333477212103 2009-Mar-09 00:47:41 INFO2 take_data: Starting WAPP scan: 906800004 2009-Mar-09 00:47:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Mar-09 00:47:42 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-09 00:47:42 LOG5 begin_task: Level: (5) ID = <10301> Status = 0 0 0 0 ok 2009-Mar-09 00:47:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-09 00:47:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Mar-09 00:47:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.037 0.973 0.933 0.931 2009-Mar-09 00:47:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.914 1.086 0.948 0.923 2009-Mar-09 00:47:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.950 1.006 1.104 1.094 2009-Mar-09 00:47:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.968 0.110 1.071 0.120 2009-Mar-09 00:47:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17263.00 2009-Mar-09 00:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.269656 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-09 00:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.269656 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-09 00:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.269656 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-09 00:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.269656 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-09 00:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.269656 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-09 00:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.104 (still bad) 2009-Mar-09 00:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.269656 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-09 00:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.269656 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-09 00:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.269656 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-09 00:47:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.269656 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-09 00:47:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-09 00:47:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-09 00:47:48 LOG5 end_task: Level: (5) ID = <10301> Status = 0 0 0 0 ok 2009-Mar-09 00:47:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-09 00:47:48 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2009-Mar-09 00:47:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Mar-09 00:47:48 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-09 00:47:48 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-09 00:47:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-09 00:47:48 LOG5 begin_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2009-Mar-09 00:47:49 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-09 00:47:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-09 00:47:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-09 00:47:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-09 00:47:49 LOG5 end_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2009-Mar-09 00:47:49 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-Mar-09 00:47:49 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-Mar-09 00:47:49 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-09 00:47:49 LOG5 begin_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2009-Mar-09 00:47:49 LOG5 log_alfabeam: Parameters: 12.134416666666665 8.4459444444444429 11.480670 2009.1862647349608 57.999950 2009-Mar-09 00:47:49 LOG4 log_alfabeam: ALFABEAM 0 12.134416666666661 8.445944444444439 2009-Mar-09 00:47:49 LOG4 log_alfabeam: ALFABEAM 1 12.132178024395774 8.543906263439370 2009-Mar-09 00:47:49 LOG4 log_alfabeam: ALFABEAM 2 12.127879632773949 8.479223161382793 2009-Mar-09 00:47:49 LOG4 log_alfabeam: ALFABEAM 3 12.130075724357349 8.381046489574913 2009-Mar-09 00:47:49 LOG4 log_alfabeam: ALFABEAM 4 12.136620030014296 8.347684581220019 2009-Mar-09 00:47:49 LOG4 log_alfabeam: ALFABEAM 5 12.140975466995068 8.413185768941835 2009-Mar-09 00:47:49 LOG4 log_alfabeam: ALFABEAM 6 12.138729536121303 8.511230138406317 2009-Mar-09 00:47:49 INFO2 take_data: Starting WAPP scan: 906800005 2009-Mar-09 00:47:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Mar-09 00:47:49 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-09 00:47:49 LOG5 begin_task: Level: (5) ID = <10304> Status = 0 0 0 0 ok 2009-Mar-09 00:47:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-09 00:47:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17270.00 2009-Mar-09 00:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.546 (still bad) 2009-Mar-09 00:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.269656 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-09 00:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.269656 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-09 00:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.269656 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-09 00:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.269656 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-09 00:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.269656 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-09 00:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.269656 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-09 00:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.269656 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-09 00:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.269656 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-09 00:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.269656 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-09 00:47:55 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-Mar-09 00:47:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-09 00:47:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-09 00:47:55 LOG5 end_task: Level: (5) ID = <10304> Status = 0 0 0 0 ok 2009-Mar-09 00:47:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-09 00:47:55 LOG5 end_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2009-Mar-09 00:47:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Mar-09 00:47:55 STOP finish_task: Finishing task 'WAPP calibration' 2009-Mar-09 00:47:55 LOG5 finish_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2009-Mar-09 00:47:55 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Mar-09 00:47:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 00:47:55 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Mar-09 00:47:55 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2009-Mar-09 00:47:56 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-Mar-09 00:47:56 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 314.40 and ZA = 13.91 2009-Mar-09 00:47:56 LOG3 track_source: Calling 'track_source AGESVC1A_p1_023 314.40 13.9111815156 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Mar-09 00:47:56 START begin_task: Starting task 'sending tracking commands' 2009-Mar-09 00:47:56 LOG5 begin_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2009-Mar-09 00:47:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1A_p1_023} INFO {Slewing to source 'AGESVC1A_p1_023' ...} 2009-Mar-09 00:47:56 INFO1 track_source: Starting to track AGESVC1A_p1_023 2009-Mar-09 00:47:56 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1A_p1_023" 2009-Mar-09 00:47:56 LOG3 vw_send: To DATATAKING: set ra 314.40 2009-Mar-09 00:47:56 LOG3 vw_send: To DATATAKING: set dec 13.9111815156 2009-Mar-09 00:47:56 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-09 00:47:56 LOG3 vw_send: To DATATAKING: pnt tr 314.40 13.9111815156 -CF 2009-Mar-09 00:47:56 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Mar-09 00:47:56 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-09 00:47:56 LOG5 finish_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2009-Mar-09 00:47:56 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-09 00:47:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 00:47:56 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-09 00:47:56 LOG5 end_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2009-Mar-09 00:47:56 LOG1 fixed_driftmap: Parameters: HA = -00:39:59.8 Start = 11:29:30.6 LST = 11:28:57.4 diff = 33.1 secs 2009-Mar-09 00:47:56 INFO2 fixed_driftmap: Waiting 31.1 seconds for RA 12:09:30 2009-Mar-09 00:47:56 INFO2 lstwait: Waiting for 31.1 secs from LST 11:28:57 to LST 11:29:29 ... 2009-Mar-09 00:47:56 LOG4 send_obs_status: To obs_status: <1> TASKTIME 31.060142836048193 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Mar-09 00:47:56 START begin_task: Starting task 'waiting on wait on LST' 2009-Mar-09 00:47:56 LOG5 begin_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2009-Mar-09 00:47:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1A_p1_023" 2009-Mar-09 00:47:56 LOG4 got_cormsg: From DATATAKING: set ra 314.40 2009-Mar-09 00:47:56 LOG4 got_cormsg: From DATATAKING: set dec 13.9111815156 2009-Mar-09 00:47:56 LOG4 got_cormsg: From DATATAKING: vw% 314.40 2009-Mar-09 00:47:56 LOG4 got_cormsg: From DATATAKING: vw% 13.9111815156 2009-Mar-09 00:47:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:47:56 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-09 00:47:56 LOG4 got_cormsg: From DATATAKING: pnt tr 314.40 13.9111815156 -CF 2009-Mar-09 00:47:56 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Mar-09 00:47:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-09 00:47:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 00:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:48:27 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Mar-09 00:48:27 LOG5 end_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2009-Mar-09 00:48:27 LOG4 lstwait: Finished waiting 0.95 seconds late 2009-Mar-09 00:48:27 INFO3 lstwait: Finished waiting 2009-Mar-09 00:48:27 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-09 00:48:27 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-Mar-09 00:48:27 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Mar-09 00:48:27 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-Mar-09 00:48:27 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Mar-09 00:48:27 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-Mar-09 00:48:27 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-09 00:48:27 LOG5 begin_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2009-Mar-09 00:48:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Mar-09 00:48:27 INFO2 take_data: Starting WAPP scan: 906800006 2009-Mar-09 00:48:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-Mar-09 00:48:28 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-09 00:48:28 LOG5 begin_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2009-Mar-09 00:48:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-09 00:48:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17309.00 2009-Mar-09 00:48:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.269656 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-09 00:48:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.269656 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-09 00:48:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.269656 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-09 00:48:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.269656 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-09 00:48:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.269656 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-09 00:48:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.269656 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-09 00:48:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.269656 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-09 00:48:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.269656 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-09 00:48:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.269656 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-09 00:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:48:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 00:48:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.038 0.973 0.936 0.931 2009-Mar-09 00:48:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 1.071 0.953 0.940 2009-Mar-09 00:48:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.953 1.007 1.113 1.115 2009-Mar-09 00:48:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.971 0.111 1.071 0.120 2009-Mar-09 00:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:49:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 00:49:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.037 0.974 0.938 0.935 2009-Mar-09 00:49:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 1.075 0.952 0.933 2009-Mar-09 00:49:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.957 1.013 1.112 1.114 2009-Mar-09 00:49:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.973 0.111 1.073 0.120 2009-Mar-09 00:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-Mar-09 00:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:50:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Mar-09 00:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:50:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 00:50:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.038 0.972 0.938 0.935 2009-Mar-09 00:50:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 1.078 0.948 0.933 2009-Mar-09 00:50:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.959 1.019 1.115 1.116 2009-Mar-09 00:50:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.975 0.111 1.073 0.120 2009-Mar-09 00:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-Mar-09 00:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.110 (still bad) 2009-Mar-09 00:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-Mar-09 00:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:51:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 00:51:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.033 0.972 0.935 0.934 2009-Mar-09 00:51:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.901 1.075 0.947 0.931 2009-Mar-09 00:51:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.957 1.013 1.108 1.113 2009-Mar-09 00:51:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.972 0.111 1.069 0.120 2009-Mar-09 00:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 00:52:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 00:52:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 0.974 0.934 0.932 2009-Mar-09 00:52:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.901 1.074 0.947 0.928 2009-Mar-09 00:52:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.958 1.014 1.115 1.117 2009-Mar-09 00:52:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.972 0.111 1.071 0.120 2009-Mar-09 00:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-Mar-09 00:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-Mar-09 00:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.111 (still bad) 2009-Mar-09 00:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 00:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.112 (still bad) 2009-Mar-09 00:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 00:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 00:53:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 00:53:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.033 0.975 0.933 0.933 2009-Mar-09 00:53:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.904 1.076 0.947 0.931 2009-Mar-09 00:53:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.960 1.013 1.118 1.123 2009-Mar-09 00:53:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.974 0.111 1.074 0.121 2009-Mar-09 00:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2009-Mar-09 00:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 00:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 00:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 00:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 00:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.131 (still bad) 2009-Mar-09 00:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.139 (still bad) 2009-Mar-09 00:54:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 00:54:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.036 0.977 0.935 0.931 2009-Mar-09 00:54:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 1.139 0.950 0.933 2009-Mar-09 00:54:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.957 1.007 1.115 1.120 2009-Mar-09 00:54:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.972 0.111 1.072 0.121 2009-Mar-09 00:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.128 (still bad) 2009-Mar-09 00:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.127 (still bad) 2009-Mar-09 00:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.128 (still bad) 2009-Mar-09 00:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.126 (still bad) 2009-Mar-09 00:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad) 2009-Mar-09 00:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-Mar-09 00:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 00:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 00:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-Mar-09 00:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.132 (still bad) 2009-Mar-09 00:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.146 (still bad) 2009-Mar-09 00:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.159 (still bad) 2009-Mar-09 00:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.169 (still bad) 2009-Mar-09 00:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.179 (still bad) 2009-Mar-09 00:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.181 (still bad) 2009-Mar-09 00:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.170 (still bad) 2009-Mar-09 00:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.164 (still bad) 2009-Mar-09 00:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.154 (still bad) 2009-Mar-09 00:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.140 (still bad) 2009-Mar-09 00:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.131 (still bad) 2009-Mar-09 00:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2009-Mar-09 00:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 00:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 00:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:55:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 00:55:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.041 0.981 0.934 0.933 2009-Mar-09 00:55:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.901 1.077 0.956 0.936 2009-Mar-09 00:55:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.958 1.011 1.113 1.118 2009-Mar-09 00:55:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.973 0.111 1.073 0.121 2009-Mar-09 00:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 00:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 00:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 00:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 00:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 00:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2009-Mar-09 00:56:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 00:56:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.037 0.978 0.936 0.933 2009-Mar-09 00:56:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 1.073 0.950 0.927 2009-Mar-09 00:56:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.956 1.010 1.117 1.123 2009-Mar-09 00:56:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.976 0.111 1.075 0.121 2009-Mar-09 00:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2009-Mar-09 00:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 00:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2009-Mar-09 00:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 00:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 00:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 00:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 00:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 00:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 00:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:57:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 00:57:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.041 0.979 0.937 0.935 2009-Mar-09 00:57:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 1.075 0.951 0.929 2009-Mar-09 00:57:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.961 1.014 1.114 1.121 2009-Mar-09 00:57:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.977 0.111 1.076 0.121 2009-Mar-09 00:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 00:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 00:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 00:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 00:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 00:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:58:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 00:58:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.038 0.978 0.937 0.932 2009-Mar-09 00:58:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.905 1.075 0.954 0.937 2009-Mar-09 00:58:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.960 1.011 1.115 1.115 2009-Mar-09 00:58:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.974 0.111 1.076 0.121 2009-Mar-09 00:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 00:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 00:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 00:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2009-Mar-09 00:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2009-Mar-09 00:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-Mar-09 00:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-Mar-09 00:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-Mar-09 00:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad) 2009-Mar-09 00:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-Mar-09 00:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2009-Mar-09 00:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-Mar-09 00:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2009-Mar-09 00:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2009-Mar-09 00:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2009-Mar-09 00:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2009-Mar-09 00:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2009-Mar-09 00:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2009-Mar-09 00:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2009-Mar-09 00:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2009-Mar-09 00:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 00:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 00:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 00:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2009-Mar-09 00:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 00:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad) 2009-Mar-09 00:59:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 00:59:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.037 0.976 0.938 0.933 2009-Mar-09 00:59:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 1.074 0.953 0.928 2009-Mar-09 00:59:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.963 1.014 1.117 1.123 2009-Mar-09 00:59:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.111 1.088 0.121 2009-Mar-09 01:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad) 2009-Mar-09 01:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.126 (still bad) 2009-Mar-09 01:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad) 2009-Mar-09 01:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-Mar-09 01:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.126 (still bad) 2009-Mar-09 01:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad) 2009-Mar-09 01:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-Mar-09 01:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.126 (still bad) 2009-Mar-09 01:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.126 (still bad) 2009-Mar-09 01:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.125 (still bad) 2009-Mar-09 01:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.126 (still bad) 2009-Mar-09 01:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad) 2009-Mar-09 01:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad) 2009-Mar-09 01:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.125 (still bad) 2009-Mar-09 01:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-Mar-09 01:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2009-Mar-09 01:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2009-Mar-09 01:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2009-Mar-09 01:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:00:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 01:00:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.036 0.975 0.934 0.931 2009-Mar-09 01:00:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 1.076 0.956 0.934 2009-Mar-09 01:00:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.974 1.024 1.117 1.115 2009-Mar-09 01:00:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.976 0.111 1.076 0.121 2009-Mar-09 01:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 01:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:02:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 01:02:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 0.972 0.935 0.930 2009-Mar-09 01:02:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.901 1.075 0.948 0.923 2009-Mar-09 01:02:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.961 1.014 1.114 1.115 2009-Mar-09 01:02:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.973 0.111 1.073 0.121 2009-Mar-09 01:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:03:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 01:03:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.033 0.972 0.935 0.931 2009-Mar-09 01:03:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 1.074 0.950 0.930 2009-Mar-09 01:03:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.959 1.013 1.116 1.117 2009-Mar-09 01:03:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.974 0.111 1.073 0.121 2009-Mar-09 01:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 01:04:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 01:04:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.035 0.973 0.935 0.930 2009-Mar-09 01:04:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.901 1.076 0.951 0.927 2009-Mar-09 01:04:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.961 1.013 1.111 1.117 2009-Mar-09 01:04:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.980 0.111 1.080 0.121 2009-Mar-09 01:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2009-Mar-09 01:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-Mar-09 01:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2009-Mar-09 01:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2009-Mar-09 01:05:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 01:05:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.037 0.975 0.938 0.932 2009-Mar-09 01:05:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 1.077 0.951 0.929 2009-Mar-09 01:05:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.964 1.015 1.120 1.121 2009-Mar-09 01:05:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.975 0.111 1.075 0.121 2009-Mar-09 01:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-Mar-09 01:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2009-Mar-09 01:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2009-Mar-09 01:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 01:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 01:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:06:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-09 01:06:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.030 0.971 0.936 0.929 2009-Mar-09 01:06:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 1.076 0.952 0.927 2009-Mar-09 01:06:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.965 1.017 1.115 1.117 2009-Mar-09 01:06:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.976 0.112 1.075 0.121 2009-Mar-09 01:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 01:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 01:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 01:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 01:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 01:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:07:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 01:07:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.030 0.970 0.935 0.931 2009-Mar-09 01:07:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.901 1.077 0.952 0.924 2009-Mar-09 01:07:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.963 1.016 1.118 1.117 2009-Mar-09 01:07:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.975 0.111 1.075 0.121 2009-Mar-09 01:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2009-Mar-09 01:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 01:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2009-Mar-09 01:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2009-Mar-09 01:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2009-Mar-09 01:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 01:08:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 01:08:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.029 0.970 0.936 0.931 2009-Mar-09 01:08:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 1.077 0.952 0.926 2009-Mar-09 01:08:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.964 1.016 1.117 1.119 2009-Mar-09 01:08:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.975 0.111 1.075 0.121 2009-Mar-09 01:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2009-Mar-09 01:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:08:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-09 01:08:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-09 01:08:29 LOG5 end_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2009-Mar-09 01:08:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-09 01:08:29 LOG5 end_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2009-Mar-09 01:08:29 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Mar-09 01:08:29 LOG5 finish_task: Level: (2) ID = <10274> Status = 0 0 0 0 ok 2009-Mar-09 01:08:29 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-Mar-09 01:08:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-09 01:08:29 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-Mar-09 01:08:29 LOG5 end_task: Level: (2) ID = <10274> Status = 0 0 0 0 ok 2009-Mar-09 01:08:29 COMMAND run_command_line: EXECUTING command 12: 'ENDIF' 2009-Mar-09 01:08:29 COMMAND run_command_line: EXECUTING command 15: 'IF LSTSLEW(AGESVC1B_p2_047) < 115329 THEN' 2009-Mar-09 01:08:30 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1B_p2_047) < 115329 2009-Mar-09 01:08:30 INFO5 is_if_valid: Condition parsed as: 11.829669333333333 < 11.891388888888889 2009-Mar-09 01:08:30 COMMAND run_command_line: EXECUTING command 16: 'FIXEDDRIFT az=319.17 alfaangle=53.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_047 ra=122900.00 dec=75100.00' 2009-Mar-09 01:08:30 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-Mar-09 01:08:30 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-09 01:08:30 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 319.17 53.6 hcorcal 5 tracking no first 1 AGESVC1B_p2_047 122900.00 75100.00 J 8500.0 Heliocentric velocity(optical)' 2009-Mar-09 01:08:30 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Mar-09 01:08:30 LOG5 begin_task: Level: (2) ID = <10309> Status = 0 0 0 0 ok 2009-Mar-09 01:08:30 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1A_p1_023' 2009-Mar-09 01:08:30 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Mar-09 01:08:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p2_047} 2009-Mar-09 01:08:30 INFO3 fixed_driftmap: Sending telescope to Az = 319.17 and ZA = 13.72 2009-Mar-09 01:08:30 LOG3 track_source: Calling 'track_source AGESVC1B_p2_047 319.17 13.7153984062 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Mar-09 01:08:30 START begin_task: Starting task 'sending tracking commands' 2009-Mar-09 01:08:30 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2009-Mar-09 01:08:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_047} INFO {Slewing to source 'AGESVC1B_p2_047' ...} 2009-Mar-09 01:08:30 INFO1 track_source: Starting to track AGESVC1B_p2_047 2009-Mar-09 01:08:30 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_047" 2009-Mar-09 01:08:30 LOG3 vw_send: To DATATAKING: set ra 319.17 2009-Mar-09 01:08:30 LOG3 vw_send: To DATATAKING: set dec 13.7153984062 2009-Mar-09 01:08:30 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-09 01:08:30 LOG3 vw_send: To DATATAKING: pnt tr 319.17 13.7153984062 -CF 2009-Mar-09 01:08:30 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Mar-09 01:08:30 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-09 01:08:30 LOG5 finish_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2009-Mar-09 01:08:30 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-09 01:08:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 01:08:30 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-09 01:08:30 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2009-Mar-09 01:08:30 START begin_task: Starting task 'rotate ALFA to +53.6 degrees' 2009-Mar-09 01:08:30 LOG5 begin_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2009-Mar-09 01:08:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +53.6 degrees ...} 2009-Mar-09 01:08:30 INFO2 rotate_alfa: ALFA commanded to +53.6 degrees 2009-Mar-09 01:08:30 LOG3 sock_errsend: To ALFAMOTOR: POSITION 53.6 REPLY 2009-Mar-09 01:08:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Mar-09 01:08:30 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Mar-09 01:08:30 LOG5 begin_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2009-Mar-09 01:08:31 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_047" 2009-Mar-09 01:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:08:31 LOG4 got_cormsg: From DATATAKING: set ra 319.17 2009-Mar-09 01:08:31 LOG4 got_cormsg: From DATATAKING: set dec 13.7153984062 2009-Mar-09 01:08:31 LOG4 got_cormsg: From DATATAKING: vw% 319.17 2009-Mar-09 01:08:31 LOG4 got_cormsg: From DATATAKING: vw% 13.7153984062 2009-Mar-09 01:08:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 01:08:31 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-09 01:08:31 LOG4 got_cormsg: From DATATAKING: pnt tr 319.17 13.7153984062 -CF 2009-Mar-09 01:08:31 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Mar-09 01:08:31 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2009-Mar-09 01:08:34 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Mar-09 01:08:34 INFO3 alfa_motor: ALFA rotator in-position +53.60 degrees 2009-Mar-09 01:08:34 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Mar-09 01:08:34 LOG5 end_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2009-Mar-09 01:08:34 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-09 01:08:34 STOP finish_task: Finishing task 'rotate ALFA to +53.6 degrees' 2009-Mar-09 01:08:34 LOG5 finish_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2009-Mar-09 01:08:34 INFO2 finish_task: DONE finished configuration: rotating ALFA to +53.6 degrees 2009-Mar-09 01:08:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 01:08:34 STOP end_task: Finishing task 'rotate ALFA to +53.6 degrees' with status 'OK' 2009-Mar-09 01:08:34 LOG5 end_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2009-Mar-09 01:08:34 START begin_task: Starting task 'waiting on telescope' 2009-Mar-09 01:08:34 LOG5 begin_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2009-Mar-09 01:08:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Mar-09 01:08:34 LOG3 waittrk: Start waittrk 5 2009-Mar-09 01:08:34 START begin_task: Starting task 'waiting on telescope movement' 2009-Mar-09 01:08:34 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2009-Mar-09 01:08:39 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Mar-09 01:08:39 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2009-Mar-09 01:08:39 START begin_task: Starting task 'waiting on telescope on source' 2009-Mar-09 01:08:39 LOG5 begin_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2009-Mar-09 01:08:58 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Mar-09 01:08:58 LOG5 end_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2009-Mar-09 01:08:58 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-09 01:08:58 INFO2 waittrk: Now tracking AGESVC1B_p2_047 2009-Mar-09 01:08:58 LOG4 waittrk: Current telescope position: Az = 318.78 ZA = 13.70 2009-Mar-09 01:08:58 STOP finish_task: Finishing task 'waiting on telescope' 2009-Mar-09 01:08:58 LOG5 finish_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2009-Mar-09 01:08:58 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Mar-09 01:08:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 01:08:58 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Mar-09 01:08:58 LOG5 end_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2009-Mar-09 01:08:58 START begin_task: Starting task 'selecting calibration type' 2009-Mar-09 01:08:58 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2009-Mar-09 01:08:58 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-09 01:08:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-09 01:08:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-09 01:08:58 START begin_task: Starting task 'waiting on setcal' 2009-Mar-09 01:08:58 LOG5 begin_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2009-Mar-09 01:08:58 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-09 01:08:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-09 01:08:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 01:08:59 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-09 01:08:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-09 01:08:59 LOG5 end_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2009-Mar-09 01:08:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-09 01:08:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-09 01:08:59 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-09 01:08:59 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-09 01:08:59 LOG5 begin_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2009-Mar-09 01:08:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 01:08:59 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-09 01:08:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-09 01:08:59 LOG5 end_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2009-Mar-09 01:08:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-09 01:08:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-09 01:08:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-09 01:08:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-09 01:08:59 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-09 01:08:59 LOG5 begin_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2009-Mar-09 01:08:59 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-09 01:08:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-09 01:08:59 LOG5 end_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2009-Mar-09 01:08:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-09 01:08:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-09 01:08:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-09 01:08:59 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2009-Mar-09 01:08:59 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-Mar-09 01:08:59 INFO2 astwait: Waiting for 144 seconds from 05:08:59 to 05:11:23 UTC ... 2009-Mar-09 01:08:59 LOG4 send_obs_status: To obs_status: <1> TASKTIME 144 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Mar-09 01:08:59 START begin_task: Starting task 'waiting on waiting for AST time' 2009-Mar-09 01:08:59 LOG5 begin_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2009-Mar-09 01:11:23 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-Mar-09 01:11:23 LOG5 end_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2009-Mar-09 01:11:23 INFO3 astwait: Finished waiting 2009-Mar-09 01:11:23 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-09 01:11:23 LOG5 dopset_later: Calling 'dopset_later 61.283851006072766' 2009-Mar-09 01:11:23 INFO3 dopset_later: Setting Doppler correction for 01:12:23 (61.3 seconds from now) 2009-Mar-09 01:11:23 LOG5 antvel: Calling 'antvel 319.170000 13.715398 F 61.283851006072766' 2009-Mar-09 01:11:23 LOG2 antvel: Transforming current Az = 319.17 ZA = 13.72 to apparent RA = 12:29:30.0 Dec = +07:47:42.1 2009-Mar-09 01:11:23 LOG2 antvel: Parameters to Doppler: Heliocentric 18743 2009 68 0.0 2009-Mar-09 01:11:23 INFO5 antvel: Computed antenna velocity: -8.07885 km/s 2009-Mar-09 01:11:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-8.0788521779 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-Mar-09 01:11:23 INFO4 dopset_gen: New sky frequencies: 1381.280652 1381.280652 1381.280652 1381.280652 1381.280652 1381.280652 1381.280652 1381.280652 1381.280652 2009-Mar-09 01:11:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.280652 sky0=1381.280652 sky1=1381.280652 sky2=1381.280652 sky3=1381.280652 sky4=1381.280652 sky5=1381.280652 sky6=1381.280652 sky7=1381.280652 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-09 01:11:23 LOG2 dopset_gen: Result from 'sky2syn': 1631.280652 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-09 01:11:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631280652.0} 2009-Mar-09 01:11:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-09 01:11:23 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-Mar-09 01:11:23 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-Mar-09 01:11:23 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:28:03.7 Dec = +07:50:44.8 2009-Mar-09 01:11:23 LOG3 track_source: Calling 'track_source AGESVC1B_p2_047 122803.7 075044.8 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Mar-09 01:11:23 START begin_task: Starting task 'sending tracking commands' 2009-Mar-09 01:11:23 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2009-Mar-09 01:11:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_047} INFO {Slewing to source 'AGESVC1B_p2_047' ...} 2009-Mar-09 01:11:23 INFO1 track_source: Starting to track AGESVC1B_p2_047 2009-Mar-09 01:11:23 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_047" 2009-Mar-09 01:11:23 LOG3 vw_send: To DATATAKING: set ra 122803.7 2009-Mar-09 01:11:23 LOG3 vw_send: To DATATAKING: set dec 075044.8 2009-Mar-09 01:11:23 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-09 01:11:23 LOG3 vw_send: To DATATAKING: pnt tr 122803.7 075044.8 -CJ 2009-Mar-09 01:11:23 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Mar-09 01:11:23 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-09 01:11:23 LOG5 finish_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2009-Mar-09 01:11:23 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-09 01:11:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 01:11:23 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-09 01:11:23 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2009-Mar-09 01:11:23 START begin_task: Starting task 'waiting on telescope' 2009-Mar-09 01:11:23 LOG5 begin_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2009-Mar-09 01:11:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Mar-09 01:11:23 LOG3 waittrk: Start waittrk 5 2009-Mar-09 01:11:23 START begin_task: Starting task 'waiting on telescope movement' 2009-Mar-09 01:11:23 LOG5 begin_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2009-Mar-09 01:11:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631280652.0} 2009-Mar-09 01:11:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-09 01:11:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 01:11:23 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_047" 2009-Mar-09 01:11:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 01:11:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 01:11:23 LOG4 got_cormsg: From DATATAKING: set ra 122803.7 2009-Mar-09 01:11:23 LOG4 got_cormsg: From DATATAKING: set dec 075044.8 2009-Mar-09 01:11:23 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-09 01:11:23 LOG4 got_cormsg: From DATATAKING: pnt tr 122803.7 075044.8 -CJ 2009-Mar-09 01:11:23 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Mar-09 01:11:23 LOG4 got_cormsg: From DATATAKING: 122803.7 2009-Mar-09 01:11:23 LOG4 got_cormsg: From DATATAKING: vw% 075044.8 2009-Mar-09 01:11:23 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2009-Mar-09 01:11:28 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Mar-09 01:11:28 LOG5 end_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2009-Mar-09 01:11:28 START begin_task: Starting task 'waiting on telescope on source' 2009-Mar-09 01:11:28 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2009-Mar-09 01:11:30 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Mar-09 01:11:30 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2009-Mar-09 01:11:30 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-09 01:11:30 INFO2 waittrk: Now tracking AGESVC1B_p2_047 2009-Mar-09 01:11:30 LOG4 waittrk: Current telescope position: Az = 318.85 ZA = 13.70 2009-Mar-09 01:11:30 STOP finish_task: Finishing task 'waiting on telescope' 2009-Mar-09 01:11:30 LOG5 finish_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2009-Mar-09 01:11:30 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Mar-09 01:11:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 01:11:30 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Mar-09 01:11:30 LOG5 end_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2009-Mar-09 01:11:30 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-09 01:11:30 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2009-Mar-09 01:11:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Mar-09 01:11:30 INFO2 adjust_power: Starting to adjust WAPP power 2009-Mar-09 01:11:30 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Mar-09 01:11:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Mar-09 01:11:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-09 01:11:30 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Mar-09 01:11:30 LOG5 begin_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2009-Mar-09 01:11:30 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Mar-09 01:11:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-09 01:11:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 01:11:33 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-09 01:11:33 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Mar-09 01:11:33 LOG5 end_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2009-Mar-09 01:11:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Mar-09 01:11:33 START begin_task: Starting task 'adjusting WAPP power' 2009-Mar-09 01:11:33 LOG5 begin_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2009-Mar-09 01:11:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Mar-09 01:11:33 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-09 01:11:33 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-09 01:11:33 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-09 01:11:33 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Mar-09 01:11:33 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Mar-09 01:11:33 LOG5 begin_task: Level: (5) ID = <10328> Status = 0 0 0 0 ok 2009-Mar-09 01:11:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Mar-09 01:11:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 01:11:34 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 7 7 dB 2009-Mar-09 01:11:34 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 1 dB --- beam 5: 5 3 dB 2009-Mar-09 01:11:34 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 7 4 dB --- beam 3: 4 3 dB 2009-Mar-09 01:11:34 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2009-Mar-09 01:11:34 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Mar-09 01:11:34 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Mar-09 01:11:34 LOG5 end_task: Level: (5) ID = <10328> Status = 0 0 0 0 ok 2009-Mar-09 01:11:34 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.033 0.969 ALFA beam 1: 0.940 0.937 2009-Mar-09 01:11:34 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.900 1.076 ALFA beam 3: 0.943 0.927 2009-Mar-09 01:11:34 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.956 1.012 ALFA beam 5: 1.115 1.120 2009-Mar-09 01:11:34 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.980 0.111 ALFA beam 7: 1.080 0.121 2009-Mar-09 01:11:34 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-09 01:11:34 LOG5 finish_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2009-Mar-09 01:11:34 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Mar-09 01:11:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 01:11:34 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-09 01:11:34 LOG5 end_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2009-Mar-09 01:11:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Mar-09 01:11:34 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Mar-09 01:11:34 LOG5 finish_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2009-Mar-09 01:11:34 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Mar-09 01:11:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 01:11:34 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Mar-09 01:11:34 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2009-Mar-09 01:11:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 R Minchin 2009-Mar-09 01:11:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 R Minchin 2009-Mar-09 01:11:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 R Minchin 2009-Mar-09 01:11:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 R Minchin 2009-Mar-09 01:11:34 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2009-Mar-09 01:11:34 START begin_task: Starting task 'WAPP calibration' 2009-Mar-09 01:11:34 LOG5 begin_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2009-Mar-09 01:11:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Mar-09 01:11:34 START begin_task: Starting task 'selecting calibration type' 2009-Mar-09 01:11:34 LOG5 begin_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2009-Mar-09 01:11:34 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-09 01:11:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-09 01:11:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-09 01:11:34 START begin_task: Starting task 'waiting on setcal' 2009-Mar-09 01:11:34 LOG5 begin_task: Level: (5) ID = <10331> Status = 0 0 0 0 ok 2009-Mar-09 01:11:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 R Minchin' 2009-Mar-09 01:11:34 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-09 01:11:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-09 01:11:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 01:11:35 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-09 01:11:35 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-09 01:11:35 LOG5 end_task: Level: (5) ID = <10331> Status = 0 0 0 0 ok 2009-Mar-09 01:11:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-09 01:11:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-09 01:11:35 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-09 01:11:35 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-09 01:11:35 LOG5 begin_task: Level: (5) ID = <10332> Status = 0 0 0 0 ok 2009-Mar-09 01:11:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 01:11:35 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-09 01:11:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-09 01:11:35 LOG5 end_task: Level: (5) ID = <10332> Status = 0 0 0 0 ok 2009-Mar-09 01:11:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-09 01:11:35 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-09 01:11:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-09 01:11:35 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-09 01:11:35 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-09 01:11:35 LOG5 begin_task: Level: (5) ID = <10333> Status = 0 0 0 0 ok 2009-Mar-09 01:11:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20090309.a2048.0002.fits 2009-Mar-09 01:11:35 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-09 01:11:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-09 01:11:35 LOG5 end_task: Level: (5) ID = <10333> Status = 0 0 0 0 ok 2009-Mar-09 01:11:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-09 01:11:35 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-09 01:11:35 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-09 01:11:35 LOG5 end_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2009-Mar-09 01:11:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Mar-09 01:11:35 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Mar-09 01:11:35 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Mar-09 01:11:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-09 01:11:35 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2009-Mar-09 01:11:35 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090309.a2048.0002.fits} 2009-Mar-09 01:11:35 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-09 01:11:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Mar-09 01:11:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-09 01:11:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-09 01:11:35 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2009-Mar-09 01:11:35 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2009-Mar-09 01:11:35 LOG4 take_data: Calling 'take_data 5 5 CAL ON -' 2009-Mar-09 01:11:35 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-09 01:11:35 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2009-Mar-09 01:11:35 LOG5 log_alfabeam: Parameters: 12.467694444444444 7.8457777777777782 11.878144 2009.1863099538621 53.599941 2009-Mar-09 01:11:35 LOG4 log_alfabeam: ALFABEAM 0 12.467694444444438 7.845777777777776 2009-Mar-09 01:11:35 LOG4 log_alfabeam: ALFABEAM 1 12.465493559675387 7.944847671267891 2009-Mar-09 01:11:35 LOG4 log_alfabeam: ALFABEAM 2 12.461247733473735 7.879234660026872 2009-Mar-09 01:11:35 LOG4 log_alfabeam: ALFABEAM 3 12.463404199096425 7.779939540926797 2009-Mar-09 01:11:35 LOG4 log_alfabeam: ALFABEAM 4 12.469863312644106 7.746460151996723 2009-Mar-09 01:11:35 LOG4 log_alfabeam: ALFABEAM 5 12.474166340475509 7.812880184975987 2009-Mar-09 01:11:35 LOG4 log_alfabeam: ALFABEAM 6 12.471953063750544 7.911971387022567 2009-Mar-09 01:11:35 INFO2 take_data: Starting WAPP scan: 906800007 2009-Mar-09 01:11:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Mar-09 01:11:36 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-09 01:11:36 LOG5 begin_task: Level: (5) ID = <10336> Status = 0 0 0 0 ok 2009-Mar-09 01:11:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-09 01:11:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 01:11:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.033 0.969 0.940 0.937 2009-Mar-09 01:11:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 1.076 0.943 0.927 2009-Mar-09 01:11:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.956 1.012 1.115 1.120 2009-Mar-09 01:11:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.980 0.111 1.080 0.121 2009-Mar-09 01:11:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18697.00 2009-Mar-09 01:11:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.280652 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-09 01:11:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.280652 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-09 01:11:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.280652 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-09 01:11:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.280652 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-09 01:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.560 (still bad) 2009-Mar-09 01:11:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.280652 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-09 01:11:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.280652 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-09 01:11:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.280652 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-09 01:11:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.280652 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-09 01:11:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.280652 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-09 01:11:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-09 01:11:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-09 01:11:42 LOG5 end_task: Level: (5) ID = <10336> Status = 0 0 0 0 ok 2009-Mar-09 01:11:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-09 01:11:42 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2009-Mar-09 01:11:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Mar-09 01:11:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Mar-09 01:11:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Mar-09 01:11:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Mar-09 01:11:42 LOG5 begin_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2009-Mar-09 01:11:43 LOG3 CALCONTROL-caltrig: Software trigger 2009-Mar-09 01:11:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Mar-09 01:11:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Mar-09 01:11:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Mar-09 01:11:43 LOG5 end_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2009-Mar-09 01:11:43 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-OFF spectra ...} 2009-Mar-09 01:11:43 LOG4 take_data: Calling 'take_data 5 5 CAL OFF -' 2009-Mar-09 01:11:43 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-09 01:11:43 LOG5 begin_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2009-Mar-09 01:11:43 LOG5 log_alfabeam: Parameters: 12.467694444444444 7.8457777777777782 11.880094 2009.1863101756787 53.599941 2009-Mar-09 01:11:43 LOG4 log_alfabeam: ALFABEAM 0 12.467694444444438 7.845777777777775 2009-Mar-09 01:11:43 LOG4 log_alfabeam: ALFABEAM 1 12.465503907131831 7.944898220308153 2009-Mar-09 01:11:43 LOG4 log_alfabeam: ALFABEAM 2 12.461251258467177 7.879383928292618 2009-Mar-09 01:11:43 LOG4 log_alfabeam: ALFABEAM 3 12.463397294928223 7.780038972560304 2009-Mar-09 01:11:43 LOG4 log_alfabeam: ALFABEAM 4 12.469852901393983 7.746410006723953 2009-Mar-09 01:11:43 LOG4 log_alfabeam: ALFABEAM 5 12.474162908313820 7.812731132626790 2009-Mar-09 01:11:43 LOG4 log_alfabeam: ALFABEAM 6 12.471959961025620 7.911873188275885 2009-Mar-09 01:11:43 INFO2 take_data: Starting WAPP scan: 906800008 2009-Mar-09 01:11:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 2009-Mar-09 01:11:43 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-09 01:11:43 LOG5 begin_task: Level: (5) ID = <10339> Status = 0 0 0 0 ok 2009-Mar-09 01:11:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-09 01:11:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18704.00 2009-Mar-09 01:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.560 (still bad) 2009-Mar-09 01:11:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.280652 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-09 01:11:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.280652 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-09 01:11:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.280652 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-09 01:11:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.280652 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-09 01:11:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.280652 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-09 01:11:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.280652 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-09 01:11:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.280652 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-09 01:11:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.280652 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-09 01:11:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.280652 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-09 01:11:49 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2009-Mar-09 01:11:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-09 01:11:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-09 01:11:49 LOG5 end_task: Level: (5) ID = <10339> Status = 0 0 0 0 ok 2009-Mar-09 01:11:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-09 01:11:49 LOG5 end_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2009-Mar-09 01:11:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Mar-09 01:11:49 STOP finish_task: Finishing task 'WAPP calibration' 2009-Mar-09 01:11:49 LOG5 finish_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2009-Mar-09 01:11:49 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Mar-09 01:11:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 01:11:49 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Mar-09 01:11:49 LOG5 end_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2009-Mar-09 01:11:50 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2009-Mar-09 01:11:50 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 319.17 and ZA = 13.72 2009-Mar-09 01:11:50 LOG3 track_source: Calling 'track_source AGESVC1B_p2_047 319.17 13.7153984062 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Mar-09 01:11:50 START begin_task: Starting task 'sending tracking commands' 2009-Mar-09 01:11:50 LOG5 begin_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2009-Mar-09 01:11:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_047} INFO {Slewing to source 'AGESVC1B_p2_047' ...} 2009-Mar-09 01:11:50 INFO1 track_source: Starting to track AGESVC1B_p2_047 2009-Mar-09 01:11:50 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_047" 2009-Mar-09 01:11:50 LOG3 vw_send: To DATATAKING: set ra 319.17 2009-Mar-09 01:11:50 LOG3 vw_send: To DATATAKING: set dec 13.7153984062 2009-Mar-09 01:11:50 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-09 01:11:50 LOG3 vw_send: To DATATAKING: pnt tr 319.17 13.7153984062 -CF 2009-Mar-09 01:11:50 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Mar-09 01:11:50 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-09 01:11:50 LOG5 finish_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2009-Mar-09 01:11:50 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-09 01:11:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 01:11:50 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-09 01:11:50 LOG5 end_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2009-Mar-09 01:11:50 LOG1 fixed_driftmap: Parameters: HA = -00:36:00.4 Start = 11:53:29.7 LST = 11:52:55.4 diff = 34.4 secs 2009-Mar-09 01:11:50 INFO2 fixed_driftmap: Waiting 32.4 seconds for RA 12:29:30 2009-Mar-09 01:11:50 INFO2 lstwait: Waiting for 32.3 secs from LST 11:52:55 to LST 11:53:28 ... 2009-Mar-09 01:11:50 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.291229194874148 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Mar-09 01:11:50 START begin_task: Starting task 'waiting on wait on LST' 2009-Mar-09 01:11:50 LOG5 begin_task: Level: (3) ID = <10341> Status = 0 0 0 0 ok 2009-Mar-09 01:11:50 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_047" 2009-Mar-09 01:11:50 LOG4 got_cormsg: From DATATAKING: set ra 319.17 2009-Mar-09 01:11:50 LOG4 got_cormsg: From DATATAKING: set dec 13.7153984062 2009-Mar-09 01:11:50 LOG4 got_cormsg: From DATATAKING: vw% 319.17 2009-Mar-09 01:11:50 LOG4 got_cormsg: From DATATAKING: vw% 13.7153984062 2009-Mar-09 01:11:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 01:11:50 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-09 01:11:50 LOG4 got_cormsg: From DATATAKING: pnt tr 319.17 13.7153984062 -CF 2009-Mar-09 01:11:50 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Mar-09 01:11:50 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-09 01:11:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 01:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:12:22 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Mar-09 01:12:22 LOG5 end_task: Level: (3) ID = <10341> Status = 0 0 0 0 ok 2009-Mar-09 01:12:22 LOG4 lstwait: Finished waiting 0.71 seconds late 2009-Mar-09 01:12:22 INFO3 lstwait: Finished waiting 2009-Mar-09 01:12:22 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-09 01:12:22 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2009-Mar-09 01:12:22 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Mar-09 01:12:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2009-Mar-09 01:12:22 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Mar-09 01:12:22 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ -' 2009-Mar-09 01:12:22 START begin_task: Starting task 'WAPP spectral observation' 2009-Mar-09 01:12:22 LOG5 begin_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2009-Mar-09 01:12:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Mar-09 01:12:22 INFO2 take_data: Starting WAPP scan: 906800009 2009-Mar-09 01:12:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 2009-Mar-09 01:12:23 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Mar-09 01:12:23 LOG5 begin_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2009-Mar-09 01:12:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Mar-09 01:12:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18744.00 2009-Mar-09 01:12:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.280652 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Mar-09 01:12:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.280652 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-09 01:12:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.280652 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-09 01:12:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.280652 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-09 01:12:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.280652 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-09 01:12:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.280652 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2009-Mar-09 01:12:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.280652 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2009-Mar-09 01:12:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.280652 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2009-Mar-09 01:12:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.280652 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2009-Mar-09 01:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 01:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 01:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad) 2009-Mar-09 01:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.127 (still bad) 2009-Mar-09 01:12:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-09 01:12:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.029 0.970 0.939 0.936 2009-Mar-09 01:12:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.896 1.071 0.945 0.924 2009-Mar-09 01:12:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.955 1.010 1.121 1.125 2009-Mar-09 01:12:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.984 0.112 1.085 0.121 2009-Mar-09 01:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.128 (still bad) 2009-Mar-09 01:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.134 (still bad) 2009-Mar-09 01:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.137 (still bad) 2009-Mar-09 01:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.142 (still bad) 2009-Mar-09 01:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.146 (still bad) 2009-Mar-09 01:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.144 (still bad) 2009-Mar-09 01:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.143 (still bad) 2009-Mar-09 01:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.138 (still bad) 2009-Mar-09 01:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.132 (still bad) 2009-Mar-09 01:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.130 (still bad) 2009-Mar-09 01:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.128 (still bad) 2009-Mar-09 01:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-Mar-09 01:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 01:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 01:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 01:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-09 01:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 01:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-09 01:13:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-09 01:13:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.026 0.970 0.944 0.940 2009-Mar-09 01:13:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.912 1.088 0.945 0.922 2009-Mar-09 01:13:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.958 1.015 1.115 1.117 2009-Mar-09 01:13:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.978 0.112 1.078 0.121 2009-Mar-09 01:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-09 01:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-09 01:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 01:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-09 01:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 01:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 01:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:14:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 01:14:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 0.967 0.939 0.935 2009-Mar-09 01:14:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.901 1.076 0.945 0.925 2009-Mar-09 01:14:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.960 1.014 1.113 1.119 2009-Mar-09 01:14:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.978 0.111 1.078 0.121 2009-Mar-09 01:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.115 (still bad) 2009-Mar-09 01:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.115 (still bad) 2009-Mar-09 01:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.115 (still bad) 2009-Mar-09 01:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.115 (still bad) 2009-Mar-09 01:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.115 (still bad) 2009-Mar-09 01:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 01:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-09 01:15:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 01:15:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 0.968 0.939 0.934 2009-Mar-09 01:15:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.897 1.071 0.945 0.921 2009-Mar-09 01:15:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.958 1.010 1.113 1.115 2009-Mar-09 01:15:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.981 0.111 1.082 0.121 2009-Mar-09 01:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-09 01:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 01:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.115 (still bad) 2009-Mar-09 01:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 01:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:16:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 01:16:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 0.970 0.939 0.934 2009-Mar-09 01:16:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.896 1.073 0.945 0.922 2009-Mar-09 01:16:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.961 1.015 1.113 1.115 2009-Mar-09 01:16:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.976 0.111 1.077 0.121 2009-Mar-09 01:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.115 (still bad) 2009-Mar-09 01:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-09 01:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-09 01:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 01:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 01:17:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 01:17:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 0.971 0.937 0.932 2009-Mar-09 01:17:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.896 1.070 0.946 0.919 2009-Mar-09 01:17:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.959 1.014 1.113 1.116 2009-Mar-09 01:17:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.978 0.111 1.080 0.121 2009-Mar-09 01:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.115 (still bad) 2009-Mar-09 01:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.113 (still bad) 2009-Mar-09 01:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.115 (still bad) 2009-Mar-09 01:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.118 (still bad) 2009-Mar-09 01:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:18:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 01:18:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.036 0.973 0.939 0.933 2009-Mar-09 01:18:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 1.070 0.947 0.919 2009-Mar-09 01:18:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.960 1.016 1.116 1.120 2009-Mar-09 01:18:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.977 0.111 1.079 0.121 2009-Mar-09 01:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.116 (still bad) 2009-Mar-09 01:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.115 (still bad) 2009-Mar-09 01:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 01:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.114 (still bad) 2009-Mar-09 01:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.115 (still bad) 2009-Mar-09 01:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:19:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 01:19:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.030 0.973 0.940 0.934 2009-Mar-09 01:19:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 1.073 0.945 0.922 2009-Mar-09 01:19:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.959 1.014 1.111 1.117 2009-Mar-09 01:19:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.980 0.111 1.082 0.121 2009-Mar-09 01:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.116 (still bad) 2009-Mar-09 01:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.117 (still bad) 2009-Mar-09 01:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.118 (still bad) 2009-Mar-09 01:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.117 (still bad) 2009-Mar-09 01:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.130 (still bad) 2009-Mar-09 01:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.134 (still bad) 2009-Mar-09 01:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.138 (still bad) 2009-Mar-09 01:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.141 (still bad) 2009-Mar-09 01:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.138 (still bad) 2009-Mar-09 01:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.134 (still bad) 2009-Mar-09 01:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.132 (still bad) 2009-Mar-09 01:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.133 (still bad) 2009-Mar-09 01:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.144 (still bad) 2009-Mar-09 01:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.162 (still bad) 2009-Mar-09 01:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.187 (still bad) 2009-Mar-09 01:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.212 (still bad) 2009-Mar-09 01:20:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-09 01:20:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.039 0.976 0.952 0.947 2009-Mar-09 01:20:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 1.072 0.947 0.920 2009-Mar-09 01:20:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.961 1.018 1.223 1.234 2009-Mar-09 01:20:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.985 0.112 1.086 0.121 2009-Mar-09 01:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.245 (still bad) 2009-Mar-09 01:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.244 (still bad) 2009-Mar-09 01:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.234 (still bad) 2009-Mar-09 01:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.215 (still bad) 2009-Mar-09 01:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.191 (still bad) 2009-Mar-09 01:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.169 (still bad) 2009-Mar-09 01:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.149 (still bad) 2009-Mar-09 01:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.137 (still bad) 2009-Mar-09 01:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.127 (still bad) 2009-Mar-09 01:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.124 (still bad) 2009-Mar-09 01:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-Mar-09 01:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2009-Mar-09 01:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.119 (still bad) 2009-Mar-09 01:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.125 (still bad) 2009-Mar-09 01:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.125 (still bad) 2009-Mar-09 01:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-Mar-09 01:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-Mar-09 01:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2009-Mar-09 01:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2009-Mar-09 01:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.120 (still bad) 2009-Mar-09 01:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 01:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 01:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 01:21:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.111 < 0.75)! 2009-Mar-09 01:21:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.042 0.981 0.940 0.934 2009-Mar-09 01:21:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 1.080 0.949 0.922 2009-Mar-09 01:21:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.958 1.013 1.119 1.127 2009-Mar-09 01:21:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.978 0.111 1.079 0.121 2009-Mar-09 01:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.125 (still bad) 2009-Mar-09 01:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.125 (still bad) 2009-Mar-09 01:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-Mar-09 01:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-Mar-09 01:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2009-Mar-09 01:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.121 (still bad) 2009-Mar-09 01:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-Mar-09 01:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-Mar-09 01:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2009-Mar-09 01:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2009-Mar-09 01:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.123 (still bad) 2009-Mar-09 01:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2009-Mar-09 01:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:22:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-09 01:22:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.038 0.974 0.942 0.939 2009-Mar-09 01:22:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 1.073 0.947 0.923 2009-Mar-09 01:22:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.959 1.014 1.112 1.121 2009-Mar-09 01:22:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.979 0.112 1.082 0.121 2009-Mar-09 01:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 01:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.128 (still bad) 2009-Mar-09 01:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 01:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 01:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.130 (still bad) 2009-Mar-09 01:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.134 (still bad) 2009-Mar-09 01:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.136 (still bad) 2009-Mar-09 01:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.135 (still bad) 2009-Mar-09 01:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.134 (still bad) 2009-Mar-09 01:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.129 (still bad) 2009-Mar-09 01:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:23:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-09 01:23:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.061 0.998 0.944 0.939 2009-Mar-09 01:23:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.904 1.076 0.945 0.926 2009-Mar-09 01:23:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.956 1.011 1.113 1.121 2009-Mar-09 01:23:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.981 0.112 1.082 0.121 2009-Mar-09 01:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.128 (still bad) 2009-Mar-09 01:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 01:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 01:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 01:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:24:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-09 01:24:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.036 0.976 0.941 0.940 2009-Mar-09 01:24:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.901 1.075 0.948 0.930 2009-Mar-09 01:24:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.958 1.014 1.116 1.122 2009-Mar-09 01:24:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.980 0.112 1.082 0.122 2009-Mar-09 01:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.119 (still bad) 2009-Mar-09 01:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:25:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Mar-09 01:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 01:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 01:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 01:25:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-09 01:25:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.037 0.976 0.942 0.942 2009-Mar-09 01:25:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.906 1.081 0.948 0.931 2009-Mar-09 01:25:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.960 1.015 1.119 1.126 2009-Mar-09 01:25:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.980 0.112 1.082 0.122 2009-Mar-09 01:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.111 and 1.122 (still bad) 2009-Mar-09 01:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:26:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-09 01:26:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.039 0.974 0.944 0.940 2009-Mar-09 01:26:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.904 1.076 0.949 0.928 2009-Mar-09 01:26:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.963 1.013 1.121 1.124 2009-Mar-09 01:26:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.983 0.112 1.084 0.121 2009-Mar-09 01:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.120 (still bad) 2009-Mar-09 01:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.121 (still bad) 2009-Mar-09 01:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 01:27:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-09 01:27:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.036 0.977 0.945 0.940 2009-Mar-09 01:27:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.907 1.079 0.957 0.938 2009-Mar-09 01:27:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.962 1.014 1.124 1.129 2009-Mar-09 01:27:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.982 0.112 1.083 0.121 2009-Mar-09 01:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.131 (still bad) 2009-Mar-09 01:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.132 (still bad) 2009-Mar-09 01:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.129 (still bad) 2009-Mar-09 01:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 01:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 01:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.132 (still bad) 2009-Mar-09 01:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.142 (still bad) 2009-Mar-09 01:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.147 (still bad) 2009-Mar-09 01:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.158 (still bad) 2009-Mar-09 01:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.163 (still bad) 2009-Mar-09 01:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.160 (still bad) 2009-Mar-09 01:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.157 (still bad) 2009-Mar-09 01:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.151 (still bad) 2009-Mar-09 01:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.143 (still bad) 2009-Mar-09 01:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.138 (still bad) 2009-Mar-09 01:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.132 (still bad) 2009-Mar-09 01:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.130 (still bad) 2009-Mar-09 01:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.128 (still bad) 2009-Mar-09 01:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 01:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.129 (still bad) 2009-Mar-09 01:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.129 (still bad) 2009-Mar-09 01:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.133 (still bad) 2009-Mar-09 01:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.135 (still bad) 2009-Mar-09 01:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.136 (still bad) 2009-Mar-09 01:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.136 (still bad) 2009-Mar-09 01:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.134 (still bad) 2009-Mar-09 01:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.133 (still bad) 2009-Mar-09 01:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.133 (still bad) 2009-Mar-09 01:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.130 (still bad) 2009-Mar-09 01:28:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-09 01:28:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.039 0.979 0.945 0.944 2009-Mar-09 01:28:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.906 1.080 0.971 0.954 2009-Mar-09 01:28:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.967 1.017 1.129 1.127 2009-Mar-09 01:28:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.981 0.112 1.083 0.121 2009-Mar-09 01:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.128 (still bad) 2009-Mar-09 01:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.133 (still bad) 2009-Mar-09 01:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.134 (still bad) 2009-Mar-09 01:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.135 (still bad) 2009-Mar-09 01:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.136 (still bad) 2009-Mar-09 01:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.135 (still bad) 2009-Mar-09 01:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.130 (still bad) 2009-Mar-09 01:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 01:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 01:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.122 (still bad) 2009-Mar-09 01:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 01:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 01:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 01:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 01:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.130 (still bad) 2009-Mar-09 01:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.129 (still bad) 2009-Mar-09 01:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.128 (still bad) 2009-Mar-09 01:29:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-09 01:29:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.036 0.981 0.950 0.942 2009-Mar-09 01:29:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 1.088 0.952 0.937 2009-Mar-09 01:29:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.964 1.019 1.120 1.128 2009-Mar-09 01:29:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.982 0.112 1.083 0.121 2009-Mar-09 01:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 01:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 01:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 01:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.123 (still bad) 2009-Mar-09 01:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 01:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 01:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.128 (still bad) 2009-Mar-09 01:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 01:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 01:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 01:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 01:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.128 (still bad) 2009-Mar-09 01:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 01:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.128 (still bad) 2009-Mar-09 01:31:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-09 01:31:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.037 0.979 0.944 0.940 2009-Mar-09 01:31:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.905 1.081 0.949 0.934 2009-Mar-09 01:31:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.966 1.017 1.121 1.129 2009-Mar-09 01:31:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.998 0.112 1.100 0.121 2009-Mar-09 01:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 01:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 01:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 01:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 01:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 01:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.129 (still bad) 2009-Mar-09 01:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.131 (still bad) 2009-Mar-09 01:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.132 (still bad) 2009-Mar-09 01:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.133 (still bad) 2009-Mar-09 01:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.133 (still bad) 2009-Mar-09 01:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.133 (still bad) 2009-Mar-09 01:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.134 (still bad) 2009-Mar-09 01:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.134 (still bad) 2009-Mar-09 01:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.129 (still bad) 2009-Mar-09 01:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.128 (still bad) 2009-Mar-09 01:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 01:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 01:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.133 (still bad) 2009-Mar-09 01:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.134 (still bad) 2009-Mar-09 01:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.138 (still bad) 2009-Mar-09 01:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.142 (still bad) 2009-Mar-09 01:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.145 (still bad) 2009-Mar-09 01:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.143 (still bad) 2009-Mar-09 01:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.143 (still bad) 2009-Mar-09 01:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.138 (still bad) 2009-Mar-09 01:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.136 (still bad) 2009-Mar-09 01:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.130 (still bad) 2009-Mar-09 01:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.128 (still bad) 2009-Mar-09 01:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 01:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.128 (still bad) 2009-Mar-09 01:32:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.112 < 0.75)! 2009-Mar-09 01:32:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.037 0.978 0.945 0.943 2009-Mar-09 01:32:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.907 1.084 0.957 0.937 2009-Mar-09 01:32:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.972 1.023 1.118 1.126 2009-Mar-09 01:32:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.984 0.112 1.084 0.121 2009-Mar-09 01:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 01:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 01:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 01:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 01:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.127 (still bad) 2009-Mar-09 01:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.126 (still bad) 2009-Mar-09 01:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.124 (still bad) 2009-Mar-09 01:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:32:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Mar-09 01:32:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Mar-09 01:32:24 LOG5 end_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2009-Mar-09 01:32:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Mar-09 01:32:24 LOG5 end_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2009-Mar-09 01:32:24 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Mar-09 01:32:24 LOG5 finish_task: Level: (2) ID = <10309> Status = 0 0 0 0 ok 2009-Mar-09 01:32:24 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2009-Mar-09 01:32:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Mar-09 01:32:24 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2009-Mar-09 01:32:24 LOG5 end_task: Level: (2) ID = <10309> Status = 0 0 0 0 ok 2009-Mar-09 01:32:24 COMMAND run_command_line: EXECUTING command 19: 'ENDIF' 2009-Mar-09 01:32:24 COMMAND run_command_line: EXECUTING command 22: 'IF LSTSLEW(AGESVC1B_p2_049) < 121629 THEN' 2009-Mar-09 01:32:25 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESVC1B_p2_049) < 121629 2009-Mar-09 01:32:25 INFO5 is_if_valid: Condition parsed as: 12.242704666666668 < 12.274722222222223 2009-Mar-09 01:32:25 COMMAND run_command_line: EXECUTING command 23: 'FIXEDDRIFT az=342.98 alfaangle=33.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESVC1B_p2_049 ra=122900.00 dec=74800.00' 2009-Mar-09 01:32:25 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2009-Mar-09 01:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.112 and 1.125 (still bad) 2009-Mar-09 01:32:25 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Mar-09 01:32:25 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 342.98 33.2 hcorcal 5 tracking no first 1 AGESVC1B_p2_049 122900.00 74800.00 J 8500.0 Heliocentric velocity(optical)' 2009-Mar-09 01:32:25 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Mar-09 01:32:25 LOG5 begin_task: Level: (2) ID = <10344> Status = 0 0 0 0 ok 2009-Mar-09 01:32:25 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'AGESVC1B_p2_047' 2009-Mar-09 01:32:25 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Mar-09 01:32:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESVC1B_p2_049} 2009-Mar-09 01:32:25 INFO3 fixed_driftmap: Sending telescope to Az = 342.98 and ZA = 11.07 2009-Mar-09 01:32:25 LOG3 track_source: Calling 'track_source AGESVC1B_p2_049 342.98 11.0700655007 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Mar-09 01:32:25 START begin_task: Starting task 'sending tracking commands' 2009-Mar-09 01:32:25 LOG5 begin_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2009-Mar-09 01:32:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_049} INFO {Slewing to source 'AGESVC1B_p2_049' ...} 2009-Mar-09 01:32:25 INFO1 track_source: Starting to track AGESVC1B_p2_049 2009-Mar-09 01:32:25 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_049" 2009-Mar-09 01:32:25 LOG3 vw_send: To DATATAKING: set ra 342.98 2009-Mar-09 01:32:25 LOG3 vw_send: To DATATAKING: set dec 11.0700655007 2009-Mar-09 01:32:25 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-09 01:32:25 LOG3 vw_send: To DATATAKING: pnt tr 342.98 11.0700655007 -CF 2009-Mar-09 01:32:25 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Mar-09 01:32:25 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-09 01:32:25 LOG5 finish_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2009-Mar-09 01:32:25 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-09 01:32:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 01:32:25 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-09 01:32:25 LOG5 end_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2009-Mar-09 01:32:25 START begin_task: Starting task 'rotate ALFA to +33.2 degrees' 2009-Mar-09 01:32:25 LOG5 begin_task: Level: (3) ID = <10346> Status = 0 0 0 0 ok 2009-Mar-09 01:32:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +33.2 degrees ...} 2009-Mar-09 01:32:25 INFO2 rotate_alfa: ALFA commanded to +33.2 degrees 2009-Mar-09 01:32:25 LOG3 sock_errsend: To ALFAMOTOR: POSITION 33.2 REPLY 2009-Mar-09 01:32:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Mar-09 01:32:25 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Mar-09 01:32:25 LOG5 begin_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2009-Mar-09 01:32:26 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_049" 2009-Mar-09 01:32:26 LOG4 got_cormsg: From DATATAKING: set ra 342.98 2009-Mar-09 01:32:26 LOG4 got_cormsg: From DATATAKING: set dec 11.0700655007 2009-Mar-09 01:32:26 LOG4 got_cormsg: From DATATAKING: vw% 342.98 2009-Mar-09 01:32:26 LOG4 got_cormsg: From DATATAKING: vw% 11.0700655007 2009-Mar-09 01:32:26 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 01:32:26 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-09 01:32:26 LOG4 got_cormsg: From DATATAKING: pnt tr 342.98 11.0700655007 -CF 2009-Mar-09 01:32:26 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Mar-09 01:32:26 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2009-Mar-09 01:32:38 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Mar-09 01:32:38 INFO3 alfa_motor: ALFA rotator in-position +33.20 degrees 2009-Mar-09 01:32:38 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Mar-09 01:32:38 LOG5 end_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2009-Mar-09 01:32:38 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-09 01:32:38 STOP finish_task: Finishing task 'rotate ALFA to +33.2 degrees' 2009-Mar-09 01:32:38 LOG5 finish_task: Level: (3) ID = <10346> Status = 0 0 0 0 ok 2009-Mar-09 01:32:38 INFO2 finish_task: DONE finished configuration: rotating ALFA to +33.2 degrees 2009-Mar-09 01:32:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 01:32:38 STOP end_task: Finishing task 'rotate ALFA to +33.2 degrees' with status 'OK' 2009-Mar-09 01:32:38 LOG5 end_task: Level: (3) ID = <10346> Status = 0 0 0 0 ok 2009-Mar-09 01:32:38 START begin_task: Starting task 'waiting on telescope' 2009-Mar-09 01:32:38 LOG5 begin_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2009-Mar-09 01:32:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Mar-09 01:32:38 LOG3 waittrk: Start waittrk 5 2009-Mar-09 01:32:38 START begin_task: Starting task 'waiting on telescope movement' 2009-Mar-09 01:32:38 LOG5 begin_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2009-Mar-09 01:32:43 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Mar-09 01:32:43 LOG5 end_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2009-Mar-09 01:32:43 START begin_task: Starting task 'waiting on telescope on source' 2009-Mar-09 01:32:43 LOG5 begin_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2009-Mar-09 01:33:40 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Mar-09 01:33:40 LOG5 end_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2009-Mar-09 01:33:40 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Mar-09 01:33:40 INFO2 waittrk: Now tracking AGESVC1B_p2_049 2009-Mar-09 01:33:40 LOG4 waittrk: Current telescope position: Az = 342.61 ZA = 11.05 2009-Mar-09 01:33:40 STOP finish_task: Finishing task 'waiting on telescope' 2009-Mar-09 01:33:40 LOG5 finish_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2009-Mar-09 01:33:40 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Mar-09 01:33:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 01:33:40 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Mar-09 01:33:40 LOG5 end_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2009-Mar-09 01:33:40 START begin_task: Starting task 'selecting calibration type' 2009-Mar-09 01:33:40 LOG5 begin_task: Level: (3) ID = <10351> Status = 0 0 0 0 ok 2009-Mar-09 01:33:40 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Mar-09 01:33:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Mar-09 01:33:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Mar-09 01:33:40 START begin_task: Starting task 'waiting on setcal' 2009-Mar-09 01:33:40 LOG5 begin_task: Level: (4) ID = <10352> Status = 0 0 0 0 ok 2009-Mar-09 01:33:40 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Mar-09 01:33:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Mar-09 01:33:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 01:33:41 LOG4 got_cormsg: From DATATAKING: DONE 2009-Mar-09 01:33:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Mar-09 01:33:41 LOG5 end_task: Level: (4) ID = <10352> Status = 0 0 0 0 ok 2009-Mar-09 01:33:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Mar-09 01:33:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-09 01:33:41 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Mar-09 01:33:41 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-09 01:33:41 LOG5 begin_task: Level: (4) ID = <10353> Status = 0 0 0 0 ok 2009-Mar-09 01:33:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 01:33:41 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-09 01:33:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-09 01:33:41 LOG5 end_task: Level: (4) ID = <10353> Status = 0 0 0 0 ok 2009-Mar-09 01:33:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-09 01:33:41 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Mar-09 01:33:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Mar-09 01:33:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Mar-09 01:33:41 START begin_task: Starting task 'waiting on command to ALFA' 2009-Mar-09 01:33:41 LOG5 begin_task: Level: (4) ID = <10354> Status = 0 0 0 0 ok 2009-Mar-09 01:33:41 LOG4 got_alfamon: From ALFAMON: ACK 2009-Mar-09 01:33:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Mar-09 01:33:41 LOG5 end_task: Level: (4) ID = <10354> Status = 0 0 0 0 ok 2009-Mar-09 01:33:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Mar-09 01:33:41 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Mar-09 01:33:41 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Mar-09 01:33:41 LOG5 end_task: Level: (3) ID = <10351> Status = 0 0 0 0 ok 2009-Mar-09 01:33:41 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2009-Mar-09 01:33:41 INFO2 astwait: Waiting for 39 seconds from 05:33:41 to 05:34:20 UTC ... 2009-Mar-09 01:33:41 LOG4 send_obs_status: To obs_status: <1> TASKTIME 39 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Mar-09 01:33:41 START begin_task: Starting task 'waiting on waiting for AST time' 2009-Mar-09 01:33:41 LOG5 begin_task: Level: (3) ID = <10355> Status = 0 0 0 0 ok 2009-Mar-09 01:34:20 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2009-Mar-09 01:34:20 LOG5 end_task: Level: (3) ID = <10355> Status = 0 0 0 0 ok 2009-Mar-09 01:34:20 INFO3 astwait: Finished waiting 2009-Mar-09 01:34:20 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Mar-09 01:34:20 LOG5 dopset_later: Calling 'dopset_later 60.577660866749724' 2009-Mar-09 01:34:20 INFO3 dopset_later: Setting Doppler correction for 01:35:20 (60.6 seconds from now) 2009-Mar-09 01:34:20 LOG5 antvel: Calling 'antvel 342.980000 11.070066 F 60.577660866749724' 2009-Mar-09 01:34:20 LOG2 antvel: Transforming current Az = 342.98 ZA = 11.07 to apparent RA = 12:29:30.0 Dec = +07:44:42.1 2009-Mar-09 01:34:20 LOG2 antvel: Parameters to Doppler: Heliocentric 20120 2009 68 0.0 2009-Mar-09 01:34:20 INFO5 antvel: Computed antenna velocity: -8.03858 km/s 2009-Mar-09 01:34:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-8.0385771522000002 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2009-Mar-09 01:34:20 INFO4 dopset_gen: New sky frequencies: 1381.280466 1381.280466 1381.280466 1381.280466 1381.280466 1381.280466 1381.280466 1381.280466 1381.280466 2009-Mar-09 01:34:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.280466 sky0=1381.280466 sky1=1381.280466 sky2=1381.280466 sky3=1381.280466 sky4=1381.280466 sky5=1381.280466 sky6=1381.280466 sky7=1381.280466 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Mar-09 01:34:20 LOG2 dopset_gen: Result from 'sky2syn': 1631.280466 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Mar-09 01:34:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631280466.0} 2009-Mar-09 01:34:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-09 01:34:20 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2009-Mar-09 01:34:20 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2009-Mar-09 01:34:20 INFO5 fixed_driftmap: Tracking J2000 position: RA = 12:28:04.4 Dec = +07:47:44.8 2009-Mar-09 01:34:20 LOG3 track_source: Calling 'track_source AGESVC1B_p2_049 122804.4 074744.8 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2009-Mar-09 01:34:20 START begin_task: Starting task 'sending tracking commands' 2009-Mar-09 01:34:20 LOG5 begin_task: Level: (3) ID = <10356> Status = 0 0 0 0 ok 2009-Mar-09 01:34:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESVC1B_p2_049} INFO {Slewing to source 'AGESVC1B_p2_049' ...} 2009-Mar-09 01:34:20 INFO1 track_source: Starting to track AGESVC1B_p2_049 2009-Mar-09 01:34:20 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESVC1B_p2_049" 2009-Mar-09 01:34:20 LOG3 vw_send: To DATATAKING: set ra 122804.4 2009-Mar-09 01:34:20 LOG3 vw_send: To DATATAKING: set dec 074744.8 2009-Mar-09 01:34:20 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Mar-09 01:34:20 LOG3 vw_send: To DATATAKING: pnt tr 122804.4 074744.8 -CJ 2009-Mar-09 01:34:20 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2009-Mar-09 01:34:20 STOP finish_task: Finishing task 'sending tracking commands' 2009-Mar-09 01:34:20 LOG5 finish_task: Level: (3) ID = <10356> Status = 0 0 0 0 ok 2009-Mar-09 01:34:20 INFO2 finish_task: DONE finished sending: tracking commands 2009-Mar-09 01:34:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Mar-09 01:34:20 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Mar-09 01:34:20 LOG5 end_task: Level: (3) ID = <10356> Status = 0 0 0 0 ok 2009-Mar-09 01:34:20 START begin_task: Starting task 'waiting on telescope' 2009-Mar-09 01:34:20 LOG5 begin_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2009-Mar-09 01:34:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Mar-09 01:34:20 LOG3 waittrk: Start waittrk 5 2009-Mar-09 01:34:20 START begin_task: Starting task 'waiting on telescope movement' 2009-Mar-09 01:34:20 LOG5 begin_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2009-Mar-09 01:34:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631280466.0} 2009-Mar-09 01:34:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Mar-09 01:34:20 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESVC1B_p2_049" 2009-Mar-09 01:34:20 LOG4 got_cormsg: From DATATAKING: set ra 122804.4 2009-Mar-09 01:34:20 LOG4 got_cormsg: From DATATAKING: set dec 074744.8 2009-Mar-09 01:34:20 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-09 01:34:20 LOG4 got_cormsg: From DATATAKING: vw% 122804.4 2009-Mar-09 01:34:20 LOG4 got_cormsg: From DATATAKING: vw% 074744.8 2009-Mar-09 01:34:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09 01:34:20 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Mar-09 01:34:20 LOG4 got_cormsg: From DATATAKING: pnt tr 122804.4 074744.8 -CJ 2009-Mar-09 01:34:20 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2009-Mar-09 01:34:20 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Mar-09 01:34:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Mar-09